OPERATING INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MODE D'EMPLOI
En (English)
E (Español)
F (Français)
Active Speaker
System
(Powered Subwoofer)
TS-W150
U
For assistance and information
(United States and Puerto Rico)
8B-YP3-913-01
011220BMI-U
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ......... 2
PREPARATIONS ................................... 4
OPERATIONS ...................................... 6
SPECIFICATIONS ................................. 7
Electric Power
Maintenance
Cleaning - Unplug this unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
Power Sources - This unit should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your appliance dealer or local power company. To
operate unit on battery power, or other sources, refer to the
operating instructions.
En
Supplied accessories
Connecting cord with RCA phono plugs (1)
Speaker cords (2)
Damage Requiring Service
Unplug this unit from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
1) When the power cord or plug is damaged.
2) If liquid has been spilled, or objects have fallen into
the unit.
3) If the unit has been exposed to rain or water.
4) If the unit does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions as improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified
technician to restore the unit to normal operation.
5) If the unit has been dropped or the cabinet has been
damaged.
Grounding or Polarization - This unit is provided with a
polarized alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
6) When the unit exhibits a distinct change in performance
- this indicates a need for service.
Overloading - Do not overload wall outlets, extension cords,
integral convenience receptacles as this can result in a risk of
fire or electric shock.
Do not attempt to service this unit yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
OWNER'S RECORD
Record the model number and serial number of your set
(found at the rear of your set) below. Refer to them when
contacting your Aiwa dealer.
Lightning
Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or having the same
characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock or other hazards.
For added protection for this unit receiver during a lightning
storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the unit
due to lightning and powerline surges.
Model No. _____________________________
Serial No. _____________________________
Safety Check - Upon the completion of any service or repairs
to this unit, ask the service technician to perform safety checks
to determine that the unit is in proper operating condition.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
PREPARATIONS
A Connection
Positioning
Connection
Because low-frequency sound reproduced by the powered
subwoofer is mostly non-directional, the listener will be unable
to localize the bass source. Accordingly, the powered
subwoofer provides maximum flexibility in terms of
positioning. For the most effective low-frequency sound, the
powered subwoofer should be placed on the floor close to a
wall or in a corner of the room.
There are two ways (A and B) to connect TS-W150
to equipment (stereo system, receiver or etc).
If the epuipment has an output jack for subwoofer,
use AConnection.
If not, use BConnection..
En
Note
(Position example)
Do not connect TS-W150 to equipment in both A and B
ways simultaneously.
Note
Do not plug in the AC power cords of both TS-W150 and the
epuipment to the AC power outlets before all other connections
are made.
1
Connect the SUB WOOFER or SUPER WOOFER
jack on Ethe equipment to the INPUT 1 (FROM
SUBWOOFER TERMINAL) jack on STS-W150
with C the supplied connecting cord.
2
3
Set the INPUT SELECT switch to “1”.
Connect the AC power cord to an AC outlet.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Do not plug in the AC power cords of both TS-W150 and the
epuipment to the AC power outlets before all other connections
are made.
Preparations
Turn off the power of the equipment and remove the speaker
cords from the speaker terminals on the equipment.
En
1
Connect the speaker terminals on E the
equipment to the INPUT 2 (FROM SPEAKERS
OUT) terminals on STS-W150 with Cthe
supplied speaker cords.
• Make sure the L and R and the ) and (cords
are connected correctly.
2
With the speaker cords removed from the
equipment (see “Preparations” above), connect
Rthe right and Lleft speakers to the SPEAKERS
OUT terminals on STS-W150.
3
4
Set the INPUT SELECT switch to “2”.
Connect the AC power cord to an AC outlet.
Note
Use left/right speakers whose impedance corresponds with
the value specified on the equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
OPERATIONS
Power and Volume
Adjust the volume balance between the powered subwoofer
(TS-W150) and the left and right speakers of the connected
equipment.
1
Press the POWER button.
The indicator above the button lights up.
En
2
3
Start playback on the connected equipment.
Adjust the volume of the powered subwoofer.
Moderate volume setting
To get natural bass sounds, adjust the volume of the powered
subwoofer according to its position and the graphic equalizer
setting of the connected equipment.
Adjustment examples
a Set the VOLUME control to a little lower than the middle
when the subwoofer is placed on the floor and the
graphic equalizer is set to off.
b Set the VOLUME control to the middle when the subwoofer
is positioned higher than the floor and the graphic
equalizer is set to off.
Notes
•To avoid overloading the powered subwoofer, do not set the
volume of the connected equipment so high that the sound
is distorted.
•Low frequency sounds may be distorted when they are
emphasized by the graphic equalizer on the connected
equipment. Adjust the VOLUME control on the powered
subwoofer or the graphic equalizer on the connected
equipment.
•If the powered subwoofer will not be used for a long period
of time, press the POWER button to turn off the power, and
unplug the AC cord from the wall outlet.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Input terminals
INPUT 1 jack
INPUT 2 terminals
Phase
Depending upon the room or the characteristics of the right
and left speakers, sound from the powered subwoofer may
seem unnatural or unusually loud or soft.
Input sensitivity/impedance INPUT 1:
400 mV/10 kilo ohms (at 50 Hz)
INPUT 2:
4 V/4.5 kilo ohms (L and R)
(at 50 Hz)
In this case, try changing the PHASE switch setting. Set to the
NORMAL or REVERSE position, whichever sounds better.
Output terminals
Power output
SPEAKERS OUT terminals
150 W (4 ohms, T.H.D. less than 1%,
at 50 Hz to 200 Hz)
180 W (4 ohms, T.H.D. 10%,
at 100 Hz)
En
BASS SOUND RANGE
Frequency response
Speaker type
Speaker unit
50 Hz – 200 Hz
Bass reflex type
25 cm (9 7/8 in.)(Magnetically
shielded type)
AC 120 V, 60 Hz
You can adjust the sound range of the powered subwoofer to
complement the sound range of the other speakers.
Set the TURN OVER switch to one of the three positions.
Power requirement
Power consumption
Dimensions (w/h/d)
60 Hz:
100 Hz:
150 Hz:
Output 60 Hz and under.
Output 100 Hz and under.
Output 150 Hz and under.
70 W
320 × 378 × 447 mm
( 12 5/8 × 15 × 17 5/8 in.)
14.1 kg (31 lbs 1 oz.)
Weight
Specifications and external appearance are subject to change
without notice.
AUTO POWER
Before using this function, make sure the POWER button is
set to ON.
While the AUTO POWER switch is set to ON, the power is
automatically turned on when receiving a signal input from
either INPUT 1 or INPUT 2. The power is automatically turned
off if no signal is input for a while and the indicator of the
POWER button turns off.
If input signal is too weak (e.g. at a quiet scene in a DVD
playback), this function may not work.
In such a case, set the AUTO POWER switch to OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
For assistance and information
(United States and Puerto Rico)
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|