OPERATING INSTRUCTIONS
INSTRUCCIONES DE MANEJO
MODE D’EMPLOI
MM-RX400
MEMORY AUDIO PLAYER
REPRODUCTOR DE AUDIO CON
MEMORIA
ENGLISH
ESPAÑOL
FRANÇAIS
OWNER’S RECORD
For your convenience, record the
model number and the serial
number (you will find them in the
battery compartment of your set) in
the space provided below.
Pleasereferthemwhenyoucontact
yourAiwadealerincaseofdifficulty.
Model No. MM-RX400
Serial No.
For assistance and information,
call toll free 1-800-BUY-AIWA.
(United States and Puerto Rico)
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
The following are precautions that you
shouldalwayskeepinmind. Anyviolation
ofoneormoreofthefollowingprecautions
may cause damage and will void the
warranty.
Note on listening with the
headphones
• Listening to the player at full power for
extended periods of time can result in
hearing damage.
• Do not wear the headphones while
driving or cycling. This may create a
traffic hazard.
• You should use extreme caution or
temporarilydiscontinueuseinpotentially
hazardous situations, such as walking,
jogging, etc.
• Wear them properly; L is left and R is
right.
• The in-ear type headphones should be
worn with the longer cord behind your
neck.
To maintain good performance
• Avoid exposure to heat, moisture and
static electricity.
• Do not use the player in places that are
extremely hot, cold, dusty, or humid.
• In particular, do not keep the player in a
high humidity area such as a bathroom,
near a heater or in an area exposed to
direct sunlight (e.g., inside a parked
car).
• When you carry the battery in your
pocket, do not have other metal objects
suchascoinsorkeysinthesamepocket.
Friction caused by the metal and the
battery rubbing together may cause a
fire.
To clean the cabinet
Donotusechemicalstocleanthecabinet.
Thismaychangethecoloroftheplayeror
damage the surface. Use a soft towel to
clean the surface of the player.
• Make sure that pins or other foreign
objects do not get inside the player.
Caution of impact
Do not drop the player or allow any sharp
impact. This may cause serious damage
to the player.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 3
TABLE OF CONTENTS
Obtaining music files via
the Internet..................................... 28
INTRODUCTION
Main features ........................................ 5
Accessories........................................... 6
System requirements ............................ 7
About this manual ................................. 7
Viewing Help ......................................... 8
Organizing tracks using play
list ................................................... 30
Play List window ................................. 30
Creating a play list .............................. 32
Creating a play list so that it contains
music files already on your
computer ........................................... 34
Adding tracks to the previously created
play list .............................................. 35
Restrictions on transferring music files
and using MultiMediaCards ................ 9
PREPARATION
Deleting tracks from the previously
created play list ................................. 36
Installing the Audio Manager and
driver software .............................. 10
Uninstalling the Audio Manager and
Deleting tracks and play lists from
your database ................................... 36
driver software .................................. 12
Editing track information ..................... 38
Playing the tracks in the play list ......... 38
Playing the tracks on the music CD .... 38
Shortcut menus ................................... 39
Preparing the MM-RX400 player .... 13
Charging the battery ........................... 13
Installing the battery ............................ 13
Installing a MultiMediaCard................. 14
Formatting a MultiMediaCard.............. 14
Transferring tracks to the
MM-RX400 player .......................... 40
Connecting the MM-RX400 player to
your computer ............................... 15
Disconnecting the MM-RX400
Copy to Devices window ..................... 40
Transferring tracks to the MM-RX400
player ................................................ 42
Viewing current memory usage status
of the memory media ........................ 45
player ................................................ 16
Installing the USB driver ..................... 16
Deleting tracks from the memory
media ................................................ 45
USING AUDIO MANAGER
Increasing the number of files that
can be transferred to the MM-RX400
player ................................................ 45
Starting Audio Manager .................. 18
Switching between the Audio Manager
window and small player ................... 18
Formatting the internal Flash Memory
and MultiMediaCard .......................... 46
To exit Audio Manager ........................ 18
Changing the appearance of the Audio
Manager window ............................... 19
Identification of Audio Manager
controls .......................................... 20
Audio Manager window....................... 20
Recording tracks from a music CD 22
Read a CD window ............................. 22
Recording tracks ................................. 23
Obtaining track information about a
music CD automatically .................... 27
Download from Www.Somanuals.com. All Manuals Search And Download.
4 ENGLISH
INTRODUCTION
USING THE MM-RX400 PLAYER
Main features
• Boosts the capability of portable audio
equipmentbyincorporatingtheFMradio
feature in addition to the high-
performance memory audio player.
• Having no drive mechanism results in
skip-free sound.
• Incorporates 32MB of Flash Memory,
providing up to 96MB of storage for
recordingmusicfilesincombinationwith
the optional 64MB MultiMediaCard.
• The USB computer interface provides
high-speed transfer of music files.
• Plays back highly compressed CD-
quality WMA- and MP3-format music
files that have been transferred from
your computer using the supplied Audio
Manager software.
Player overview ............................... 47
Main unit ............................................. 47
Remote control.................................... 49
Display window ................................... 50
Using the player .............................. 51
Playing back tracks ............................. 51
Selecting a play mode......................... 52
Playing a desired portion of a track
repeatedly (A-B Repeat Playback).... 52
Selecting equalizer settings to suit
tracks ................................................ 53
Changing the track information ........... 53
Selecting the AREA setting before you
use the player ................................... 54
Listening to a radio program
(Manual Tuning) ................................ 54
Presetting stations automatically
(Auto Preset) ..................................... 55
Presetting stations manually
(Manual Preset) ................................ 56
Listening to a preset station ................ 56
APPENDIX
Specifications.................................. 57
Frequently asked questions .......... 57
General questions............................... 57
Questions about the MM-RX400
player ................................................ 59
Troubleshooting .............................. 60
Messages............................................ 63
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 5
INTRODUCTION
Accessories
The following accessories are supplied with the MM-RX400 player. Make sure all of the
items are in the package.
If anything is missing, please contact the store where you purchased the
MM-RX400 player or your nearest AIWA dealer.
1 MM-RX400 player
2 USB cable
3 Remote control
4 Stereo headphones
5 Battery charger
6 Rechargeable battery
7 32MBMultiMediaCard
8 Installation CD-ROM
9 Carrying case
0 Operatinginstructions,
etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
6 ENGLISH
System requirements
About this manual
The following hardware and software are
required for using the supplied Audio
Manager software.
This manual includes basic instructions
for using the MM-RX400 player and the
supplied Audio Manager software. For
detailed information on how to use the
versatile functions provided by Audio
Manager, refer to the Help menu that can
be accessed from the Audio Manager
window.
Hardware requirements
• Intel Pentium 233 MMX or faster
• 64MB RAM or more
• Free hard-disk space
You are also recommended to read the
Readme file included on the installation
CD-ROM, which contains important
supplemental information.
— 32MB or more for software
installation
— 64MB or more for music-file storage
• CD-ROMdrivethatsupportsdigitalaudio
extraction
• 1 available USB port
• Sound card
• 256-color display (16-bit color display is
recommended) and 16-bit color video
card
• 28.8-kbps modem or faster required for
Internet access (ISDN or LAN
connection recommended)
Software requirements
• Microsoft Windows 98 or Windows 98
Second Edition*
* You can use the Audio Manager software
only on computers on which Microsoft
Windows98orWindows98SecondEdition
has been preinstalled by the manufacturer.
TheMM-RX400playerdoesnotsupport
Macintosh computers.
• MicrosoftInternetExplorer(Version4.01
Service Pack 2 or later)
Note
Sound skip may occur, depending on the
configurationofthecomputersystemand
the applications running on it.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 7
INTRODUCTION
Viewing Help
Searching by Keyword
1 Click on the “Index” tab in the
Online Help window.
To view Help, click on “Help” in the Audio
Manager window, and then click on “Help
Topics.”
A list of keywords appears.
The“AudioManagerOnlineHelp”window
appears.
2 Enter the word that you wish to
search for or scroll the list of
keywords.
3 Selectakeywordfromthelistand
click on “Display.”
The related topic appears.
Whentwoormoretopicsarerelatedto
a selected keyword, a “Topics Found”
dialogboxappears.Selectthedesired
topicfromthelistandclickon“Display.”
• Click on
to open any book and
display the topics it contains.
To close a book, click on
.
• Click on
to open a topic page.
• Click on an underlined term in the topic
to jump to another related topic.
Download from Www.Somanuals.com. All Manuals Search And Download.
8 ENGLISH
Restrictions on transferring music files and using
MultiMediaCards
For the purpose of copyright protection for music files, the MM-RX400 player and the
supplied Audio Manager software have some restrictions on transferring music files and
using MultiMediaCards on portable players.
Transferable to a
limited number of
players
Transferable to
multiple
MultiMediaCards
Internet
1
2
3
4
Playable only
on the original
player
PC
Music CDs
• MP3 files recorded from music CDs can
be transferred to up to 3 MM-RX400
players.
• As long as the same player is used, you
can transfer the music files to more than
one MultiMediaCard as many times as
you like. However, note that in order to
play a music file transferred to the
MultiMediaCard,theplayerunitmustbe
the same one that was used to transfer
the music file.
•
WMA files recorded from music CDs can
be transferred to an unlimited number of
MM-RX400 players. However, future
changes in the file format due to changes
in specifications or because of copyright
protection measures may lead to some
restrictions on transferring and therefore
on playing back WMA files on the MM-
RX400 player. For detailed information,
• A music file transferred to the player
cannot be restored to your computer.
Tip
For specific restrictions on transferring
music files to the MM-RX400 player, click
on the “Advanced” button, which you can
find in the Copy to Devices window.
• For a music file that is obtained from a
content provider via the Internet, the
number of MM-RX400 players to which
you can transfer the music file depends
on the information written in the file by
the content provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 9
PREPARATION
Installing the Audio Manager and driver software
Before using the MM-RX400 player, you
mustinstalltheAudioManageranddriver
software on your computer.
You can also change the setting after
installation is finished. Click on the box
to the left of “Wave Audio Files” under
the“FileTypes”tabthatcanbeaccessed
by clicking on “Options” of the “View”
menu.
Before starting the installation
• Do NOT connect the MM-RX400 player
to your computer.
• Quit any active applications.
1 Insert the installation CD-ROM
into the CD-ROM drive of your
computer.
• If you have already installed a different
version of Audio Manager, delete it by
following the procedure described in
“Uninstalling the Audio Manager and
driver software” (page 12).
• IfyouinstalltheAudioManagersoftware
under Windows 98 (but not Windows 98
SE), the installation program will not
change the program to be associated
with a WAVE (.wav) file by Audio
Manager. If your system is running
Windows98,clickon“FixProblem”when
thedialogboxnoticingyouforitappears
during installation.
2 Double-clickontheMyComputer
icon on the desktop.
3 Double-click on the
access the CD-ROM.
icon to
4 Double-click on the
icon to
start the installation program.
The “Welcome!” dialog box appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 ENGLISH
5 Click on “Next.”
10Click on “Next” if you accept the
default location for storing
created music files or click on
“Browse” to select your desired
location from the “Choose
Folder” dialog box.
The “Choose Setup Language” dialog
box appears.
A dialog box appears and asks if you
want to register Audio Manager as a
default player.
6 Select the desired language from
the drop-down menu opened by
11Click on “Yes” if you want to use
AudioManagerasadefaultplayer.
Otherwise, click on “No” in the
dialog box.
clicking on the
button, then
click on “OK.”
The “License Agreement” dialog box
appears.
Copying of the driver software to the
7 Click on “Yes,” if you accept the
terms of the preceding License
Agreement.
computer starts.
12Click on “Finish” in the
“Installation Complete” dialog
box.
8 Clickon“Yes”inthenext“Privacy
Statement” dialog box if you
acceptthetermsofthestatement.
9 Click on “Next” if you accept the
default installation location or
click on “Browse” to select your
desired location from the
“Choose Folder” dialog box.
Tip
If you wish to change the configuration,
you can click on “Back” to redo any step
of the installation process.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 11
PREPARATION
13Click on “OK” in the dialog box
that prompts you to restart your
computer.
Uninstalling the Audio
Manager and driver software
1 Click on the “Start” button, point
to “Programs” and “Audio
Manager,”thenclickon“Uninstall
Audio Manager.”
A dialog box appears and asks if you
really want to uninstall the software.
When your computer finishes
rebooting, installation of the Audio
Manager and driver software is
completed.
2 Click on “Yes” in the dialog box.
3 Clickon“OK”intheUninstallation
completion dialog box.
Successively uninstall the driver
software.
4 Click on the “Start” button, point
to “Programs” and “Audio
Manager,”thenclickon“Uninstall
Driver.”
Youarefinisheduninstallingwhenyou
return to the desktop.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 ENGLISH
Preparing the MM-RX400 player
1 Removethebatterycompartment
Charging the battery
Before using the rechargeable battery for
the first time, charge it for about 8 hours.
cover.
2 Install the rechargeable battery
with the 0 and9 poles correctly
aligned.
1 Insert
the
r e c h a r g e a b l e
battery into the
supplied battery
charger.
3 Replacethebatterycompartment
cover.
Battery indicator
The battery indicator shows the power
remaining.
2 Plug the battery
chargerintoawall
outlet.
Full
b
Empty
When
lights, recharge the battery.
If you continue to use the MM-RX400
playerafter lights,the“LOWBATT”
indicator appears, operation stops, and
the MM-RX400 player beeps.
Recharging a completely drained battery
takes about 8 hours.
When the battery has finished charging,
remove it from the battery charger and
disconnect the battery charger from the
wall outlet.
Note on the rechargeable battery
• Use only the supplied battery charger to
recharge the battery.
• Do NOT carry the battery in a pocket or
handbag together with metal objects
such as pendants or key holders.
• Do NOT short-circuit the terminals by
placing a metal object across them.
• Do NOT try to disassemble the battery,
heat it, or put it in water.
Installing the battery
• The supplied rechargeable battery can
be recharged approximately 300 times.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 13
PREPARATION
Installing a MultiMediaCard
Formatting a
MultiMediaCard
You can use the 32MB MultiMediaCard
that comes with the MM-RX400 player.
Before you purchase an additional
MultiMediaCard, it is recommended to
contact your nearest AIWA service
personneltofindoutwhichkindthatworks
best with your MM-RX400 player.
In order to use a MultiMediaCard with an
MM-RX400player, youmustinitializeitto
MM-RX400 format using the format
function of the supplied Audio Manager.
For details on formatting
MultiMediaCard, see “Formatting the
internal Flash Memory and
a
Before installing or removing
a
MultiMediaCard, be sure to turn off the
MM-RX400 player and disconnect the
USB cable from it.
MultiMediaCard” (page 46).
Note on the MultiMediaCard
• Insert the MultiMediaCard completely
intotheslottoensurethatitisrecognized
by Audio Manager.
• NEVER remove the MultiMediaCard
from the MM-RX400 player while Audio
Manager is formatting it or transferring
music files to the MM-RX400 player.
Doing so may cause not only the
computer to freeze up but also the
memory media to be damaged.
• Music files on the MultiMediaCard
cannot be played back with another
player.
• A MultiMediaCard that has been used
withotherplayersthatemploysaformat
different from Windows (DOS-
compatible) format cannot be used by
the MM-RX400 player even after
formatting it with Audio Manager.
1 Removethebatterycompartment
cover (page 13).
2 InserttheMultiMediaCardintothe
slot in the correct direction,
holdingitwiththebeveledcorner
to the right.
The mark printed on the player over
theslot indicatesthecorrectorientation
of the card.
3 Replacethebatterycompartment
cover.
To remove the MultiMediaCard
First push the MultiMediaCard in slightly
to release it.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 ENGLISH
Connecting the MM-RX400 player to your computer
Use the supplied USB cable to connect
the MM-RX400 player to your computer,
as shown below.
Note
If the “Add New Hardware Wizard”
appears after you turn on the MM-RX400
player in step 3, install the USB driver,
following the procedure described in
“Installing the USB driver” (page 16).
• BeforeconnectingtheMM-RX400player
to your computer with the supplied USB
cable,besuretofullychargethebattery.
If “LOW BATT” appears on the display
of the MM-RX400 player when it is
connected to the computer, disconnect
the MM-RX400 player from the
computer, then reconnect it after fully
charging the battery.
• The following actions are strictly
prohibited while transferring music files
or formatting the memory media. Doing
so may cause not only the computer to
freeze up but also the memory media to
be damaged.
1 Connect the series A connector
(thelargerone)tothecomputer’s
USB port.
2 Connect the series B connector
(the smaller one) to the USB port
connector of the MM-RX400
player.
3 Turn on the player by holding the
e/s button pressed until
“CONNECT USB” appears on the
display of the MM-RX400 player.
If you connect the USB cable to the
MM-RX400 player while it is in
Playback mode, the player will stop
playback and display “CONNECT
USB.”
3
— Disconnecting the USB cable from
the MM-RX400 player or the
computer
— Removing the battery from the
MM-RX400 player
— Removing the MultiMediaCard from
the MM-RX400 player
Series B
connector
USB port
connector
2
• Do NOT turn on or off the computer
whiletheMM-RX400playerisconnected
to the computer. This may cause
damage to the MM-RX400 player or the
music files stored on it.
Supplied USB cable
Series A connector
PC USB port
1
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 15
PREPARATION
Disconnecting the MM-RX400
player
YoucandisconnecttheMM-RX400player
from your computer whenever you like
except during the process of transferring
music files or formatting the memory
media.
WhenyoudisconnecttheUSBcablefrom
theMM-RX400player,itwillautomatically
shut off, leaving the message “GOOD-
BYE!!”
Installing the USB driver
Installation of the USB driver is
automatically performed when you turn
on the MM-RX400 player for the first time
after connecting it to the computer (page
15).
If any problem occurs during installation
of the Audio Manager software, the “Add
New Hardware Wizard” appears when
you connect the MM-RX400 player and
turn it on. If this happens, install the USB
driver by following the steps below.
1 Click on “Next” in the “Add New
Hardware Wizard” window.
2 Select “Display a list of all the
drivers in a specific location, so
you can select the driver you
want,” then click on “Next.”
3 Select “Universal Serial Bus
controllers” from the list, then
click on “Next.”
4 Click on the “Have Disk” button.
The “Install From Disk” dialog box
appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 ENGLISH
5 Insert the supplied installation
CD-ROM into the CD-ROM drive
of your computer, then click on
the “Browse” button.
Confirming installation of the USB
driver
You can confirm if the USB driver is
successfully installed by the following
procedure:
The “Open” dialog box appears.
1 Check that the MM-RX400 player
is connected to your computer
and turned on.
2 Point to “Settings” of the “Start”
menu,thenclick“ControlPanel.”
3 Double-clickonthe“System”icon
to open the “System Properties”
dialog box.
6 Select an appropriate drive from
the “Drives” drop-down menu,
then click on “OK.”
4 Click on the “Device Manager”
tab.
7 Click on “Next” after confirming
that “AIWA MM-RX400” is listed
in the “Models” list box.
5 Click on the
mark of the
“UniversalSerialBuscontrollers”
item.
A window appears telling you that
Windows is ready to install the driver.
6 If“AIWAMM-RX400”islisted, the
USB driver is successfully
installed.
8 Click on “Next.”
The wizard begins copying the
necessary files to your computer. A
subsequent window appears when
copying of files is completed.
9 Click on “Finish.”
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 17
USING AUDIO MANAGER
Starting Audio Manager
To start Audio Manager, double-click on
Switching between the Audio
Manager window and small
player
To switch to the small player, click on the
(Small Player) icon to the right of the
navigation buttons bar in the Audio
Manager window.
the
(Audio Manager) icon on the
desktop.
You can also click on the “Start” button,
pointto“Programs”and“AudioManager,”
then click on “Audio Manager.”
Note
When you start Audio Manager for the
first time after installation, the following
dialog box appears.
Youcanalsoclickon“SmallPlayer”ofthe
“View” menu.
To switch to the Audio Manager window
(big player), right-click on the area within
the small player, then select “Big Player”
from the shortcut menu.
Tip
Each time you press the F8 key, Audio
Managerswitchesbetweenthebigplayer
and small player.
To exit Audio Manager
If you have ever installed and upgraded
AudioManager,enteryoure-mailaddress
and click on “Connect” after confirming
that you are connected to the Internet. If
not, click on “Skip,” and “OK” in the next
dialog box.
Click on
in the upper-right corner of
the Audio Manager window and small
player.
You can also click on “Exit” from the “File”
menu in the Audio Manager window or
the shortcut menu of the small player that
appears when you right-click.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 ENGLISH
Changing the appearance of
the Audio Manager window
In Audio Manager, several skins of
differentdesignareavailable,whichallow
you to change the appearance of your
Audio Manager window (also of the small
player) to suit your preference.
Clickon“Linktomoreskins”ofthe“Skins”
menu in the Audio Manager window to
connect to the Web site, where you can
find and download skins of your
preference.
Whenyouaredisplayingthesmallplayer,
click on “Skins” from menu of the small
player that appears when you right-click.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 19
USING AUDIO MANAGER
Identification of Audio Manager controls
Audio Manager window
To make full use of the MM-RX400 player, you need to learn how to use the basic
functions of the Audio Manager.
1
2
(Audio Manager with the Play List Window opened)
1 Menu bar
To learn how each menu command
functions, refer to the “Quick
Reference” book in the Online Help
window.
Clicking on an item opens a drop-
down menu from which you can select
commands.Thefollowingisthe“View”
menuopenedbyclickingonthe“View”
item on the menu bar.
2 Audio Manager navigation
buttons
make a playlist button
Click on this button to open the Play
List window, which allows you to listen
to tracks and organize tracks into play
lists as you like, such as by artist,
genre, etc. (page 30).
Download from Www.Somanuals.com. All Manuals Search And Download.
20 ENGLISH
copy to devices button
Click on this button to open the Copy
to Devices window, which allows you
to transfer tracks from your computer
to your MM-RX400 player (page 40).
The Copy to Devices window also
allows you to view a list of tracks and
delete tracks stored on the memory
media.
When you start playing back tracks on
Small Player, the WhiteCap window
appears giving representations with
3-D curve graphics.
write audio cd button
Click on this button to open the Write
CDwindow,whichallowsyoutorecord
tracks from your computer on a CD-R.
Note
Minimizing Small Player causes the
WhiteCap window to disappear. To
restore the WhiteCap window, quit
Audio Manger and restart it.
Note
AIWA does not support the functions
available in the Write CD window. For
detailed information about the Write
CDwindow,refertothe“WritetoaCD”
book in the Online Help window.
Tip
You can display each window using the
“Navigation”commandofthe“View”menu
instead of using above buttons.
read a cd button
Click on this button to open the Read
a CD window, which allows you to
record tracks from a music CD to your
computer (page 22).
go to web button
Click on this button to connect to the
Windows Media Web site (page 28).
Small Player icon
Click on this icon to transform Audio
Manager into a Small Player (page
18).
For a description of each control, see
“5 Player controls” (page 32).
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 21
USING AUDIO MANAGER
Recording tracks from a music CD
Read a CD window
The Read a CD window allows you to record selected tracks from a music CD or record
an entire music CD at once. The recorded tracks can be transferred to your MM-RX400
player for playback.
1
2
4
5
3
1 Read a CD button bar
2 Read a CD Track list
Displaysinformationabouttheinserted
music CD, such as an album title, and
thetitle, artist, andlengthofeachtrack
on the music CD.
Selectthetracksyouwanttorecordby
clicking on the box to the left of each
track.
button
Click on this button to obtain
information about the inserted music
CD from the CDDB server on the
Internet (page 27).
button
Click on this button to open the
“Preview Playlist” window, which
allows you to edit the CD or track
information manually (page 25).
button
Click on this button to start recording
tracks from a music CD.
button
Click on this button to stop recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 ENGLISH
3 Read a CD Track list button bar
Recording tracks
button
Before starting
Click on this button to reload
information on the music CD.
Before starting you may confirm and
changethesettingstousewhenrecording
tracks from a music CD by following the
steps below.
button
Click on this button to select all the
tracks on the list for recording. All the
boxes to the left of the tracks are
checked at once.
To learn more about setting preferences,
refer to the “Set Preferences” book in the
Online Help window.
1 Click on “Options” of the “View” menu
to open the “Options” dialog box.
2 Under the “Read CD” tab, confirm the
following settings and change them if
necessary.
button
Click on this button to clear the check
marks for all the tracks on the list at
once.
Drive:
4 Track Details box
Choose the CD-ROM drive to use
whenrecordingtracksfromamusic
CD. If you have multiple CD-ROM
drives in your computer, you can
change the current CD-ROM drive
Displays information about the
selected track, such as the title, artist,
playingtime,albumtitle,category,and
lyrics. You can view more detailed
information and edit it by clicking on
the “Edit Track Info” button.
by clicking on
“Drive:” field.
to the right of the
5 Status box
Record File As:
Displays the current progress of the
recording process. The upper status
bar displays the recording progress of
the track currently being processed,
and the lower status bar shows the
overall recording progress for all the
tracks selected for recording.
Choose the file format to use when
recording tracks from a music CD
by clicking on
to the right of the
“Record File As:” field. You can
choosebetween“Mpeg(.mp3)”and
“Microsoft Windows Media Audio
(.wma).”
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 23
USING AUDIO MANAGER
Bit Rate:
3 Under the “CDDB” tab, check the
“Always get title from CDDB when CD
is inserted” option by clicking on it if
you want information about a music
CD to be obtained automatically.
Ifyoucheckthisoption,youcanobtain
generalinformationaboutamusicCD,
such as album title, track titles, artist
name, and playing time from the
CDDB* server on the Internet.
Otherwise, leave this option
unchecked.
Select the bit rate to be used to
encode tracks recorded from a
music CD. Click on
of the “Bit Rate:” field, then select
oneofitems.Higherbitratescreate
files with better sound quality, but
larger file sizes result in less total
recording time that can be stored
on the memory media.
to the right
Note
• The MM-RX400 player supports
WMA and MP3 files encoded with a
following bit rate. Files encoded with
otherbitratesmaycauseinaccuracy
of elapsed playing time indicated on
the display and sound skip.
— WMA files encoded with a bit rate
of 64, 80, 96, 128, or 160 kbps
— MP3 files encoded with a bit rate
of 64, 80, 96, 128, 160, 192, 256,
or 320 kbps.
• Be sure not to check the “Protect
files for use on this machine only”
option in the “Bit Rate:” field, if you
want to play back the encoded files
onanothercomputerortransferthem
to the MM-RX400 player using
another computer.
You must have Internet access to use
CDDB.
* The disc-recognition service provided via
the Internet by CDDB, Inc.
1 Double-clickonthe icononthe
desktop to start Audio Manager.
2 Insert the music CD from which
you wish to record tracks into the
CD-ROM drive of your computer.
IfthePlayListwindowisopenandany
tracks remain on the list, the “New CD
Detected” dialog box appears, asking
you to select “Play this CD,” “Append
to Playlist,” or “Cancel.” If this dialog
box appears, click on “Cancel” in the
dialog box.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 ENGLISH
3 Clickonthe“
readacd”button
6 Edit track information.
1 Clickonthe“EditTrackInfo”button.
The “Preview Playlist” window
appears.
to open the Read a CD window.
The Read a CD window appears with
allthetracksonthemusicCDchecked
for recording.
If you did not check the “Always get
title from CDDB when CD is inserted”
option mentioned above, the dialog
boxappearsandpromptsyoutoobtain
information about the inserted music
CD automatically. Now, click on “No”
so you can edit information manually.
2 Select the track that you want to
edit, then click on the “Review/
Edit” button.
If you want to record the entire music
CD into your computer, skip steps 4
and 5, and go to step 6.
The “Edit CD Track Information”
dialog box appears.
4 Click on the “Untag All” button to
clear the check marks for all the
tracks on the “Read a CD Track”
list.
5 Select the tracks that you want to
record into your computer by
clicking on the box to the left of
each track.
To cancel the selection, click on the
box again.
Tip
If you are not sure that the track you
selected is correct, right-click on the
track, thenselect“Play”fromthedrop-
down menu to hear it.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 25
USING AUDIO MANAGER
3 Enter information about the track
such as the title, artist, album title,
genre, and lyrics.
In some fields, you can select the
desired item from the drop-down
list by clicking on
the field.
4 Click on “Next” once or more times
togotothenexttracktoedit. When
you have no more tracks to edit,
click on “Close.”
to the right of
If you are going to record tracks from
a CD for the first time, the “Testing CD
drive...” dialog box appears stating
thatyoursystemandCD-ROMdriveis
being tested. Through this process,
your system and CD-ROM drive will
be automatically configured and
optimized for recording.
5 Click on “Close” to close the
“Preview Playlist” window.
To learn more about how to use the
“EditCDTrackInformation”dialogbox,
refer to the “Edit Track Information”
under the “Playlist” book in the Online
Help window.
Note
AstoMP3format, thenumberoftimes
allowedforencodingislimitedto50. If
you try to record tracks from a music
CDpastthatlimit,amessagenotifying
you of that will appear once you click
on the “Start Reading” button. If this
happens,youcanuseWMAfileformat,
which has no such limitation.
7 Click on the “Start Reading”
button.
Therecordingprocessfortheselected
tracks starts. The Status box displays
theprogressofthetrackcurrentlybeing
recorded and the total recording
progress of all the tracks selected for
recording.
To stop recording, click on the “Stop
Reading” button.
When the entire track is successfully
recorded, the dialog box stating that
recording is completed successfully
appears.
8 Click on “OK.”
Therecordedtracksareaddedtoyour
database.
Now you are ready to go to “Creating a
play list” (page 32).
Download from Www.Somanuals.com. All Manuals Search And Download.
26 ENGLISH
Tip
Obtaining track information
about a music CD
You can get information at any time you
like, but before you start recording, by
clicking on the “Get Track Titles” button,
even if you clicked on “No” in step 3 in
“Recording tracks” (page 25). If you click
on the “Refresh” button the above dialog
box will appear.
automatically
IfyouhaveaccesstotheInternet,youcan
obtain information about the music CD,
such as the album title, track title, and
artistname,automaticallyfromtheCDDB
on the Internet.
The CDDB is a database accessible via
theInternet,whichstorestrackinformation
regarding a vast amount of music CDs
from all over the world. If your music CD
is recorded in the database, the track
information about the CD will be added to
your list. If not, no change will be made to
the list. In such a case, you are left with
entering the information manually.
Togettrackinformationaboutyourmusic
CD, perform the following.
1 Confirm that you are connected
to the Internet.
2 Insert the music CD into the CD-
ROM drive of your computer.
Adialogboxappearsaskingyouifyou
want to get information about the CD
from the Internet.
3 Click on “Yes” in the dialog box.
The connection to the CDDB is
automatically established, and
downloading starts.
4 When downloading is finished,
informationaboutyourmusicCD
will be displayed on the list.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 27
USING AUDIO MANAGER
Obtaining music files via the Internet
Audio Manager provides easy and
convenient means to stream music,
downloadmusicclips,andpurchasemusic
viatheInternet.Clickingonasinglebutton
automatically connects you to the
Windows Media Web site, where you can
find vast amounts of music downloads
covering almost all popular artists in the
world and genres,
a
variety of
entertainment contents such as movies
andradio,andinformationabouthardware
andsoftware.Thissitealsoprovidesmany
links to other entertainment Web sites.
Note
With most contents providers on the
Internet, you may be required to fill in
information on an enrollment form for
membershipbeforeyoucandownload
music files.
Note
You must have Internet access to
download music via the Internet.
4 Check the “Save this file to disk”
option and click on “OK.”
1 Clickonthe“ gotoweb”button
on the Audio Manager window.
TheWindowsMediaWebsiteappears.
The “Save As” dialog box appears.
2 Searchfordesiredmusicthrough
links of your preference, or enter
a different URL in the address
field if you know it.
3 Whenyoufindyourdesiredmusic
file, start downloading it by
clicking on the “Download”
button or other such button that
may be displayed in a particular
case.
The “File Download” dialog box
appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 ENGLISH
5 Check that “My Music” is entered
in the “Save in:” field, enter a
filename if necessary, then click
on “Save.”
Downloading
starts.
When
downloadingisfinished,the“Download
complete” dialog box appears.
6 Click on “OK” in the dialog box.
Nowyouarereadytoplaythedownloaded
music file on Audio Manager and your
MM-RX400 player.
For detailed information about obtaining
downloadable music files, refer to the
“Visit the Internet to get audio and video”
and “Play Secure Media” books in the
Online Help window.
Note
Most downloadable music files are
delivered in secure files that have
encrypted information for copyright
protection written in them. Therefore, you
may be restricted as to playing back and
transferring downloaded music files.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 29
USING AUDIO MANAGER
Organizing tracks using play list
Play List window
You can use the Play List window to view all the tracks stored on your computer, as well
as to create play lists and add selected tracks to them. The Play List window also allows
you to play back the tracks you added from your database* to the Play List.
If you save the tracks displayed on the Play List as a play list, you can easily prepare a
number of tracks for transfer to your MM-RX400 player.
* MusicfilesrecordedordownloadedtoyourcomputerusingAudioManagerareautomaticallyadded
toyourdatabase.Musicfilesalreadyonyourcomputercanbealsoaddedtoyourdatabase.Tolearn
moreaboutthedatabase,refertothe“TracksDatabase”and“PlaylistDatabase”booksintheOnline
Help window.
1
4
2
5
3
1 AddTrackstothePlayListbutton
button
bar
Click on this button to add the tracks
button
from the music CD in the CD-ROM
drive of your computer to the Play List.
Click on this button to select desired
tracks from your database and add
them to the Play List.
button
Click on this button to select desired
play lists from your database and add
the tracks contained in them to the
Play List at once.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 ENGLISH
2 Play List
Displays the list of the tracks you have
4 Track Details box
Displays detailed information about
the selected track, such as the track
title, artist name, original album title,
ratings, artwork, and lyrics.
You can edit these details by right-
clicking on the track and selecting the
“Edit Track” menu command.
addedfromyourdatabaseorthemusic
CD in the CD-ROM drive of your
computer. Each track has information
such as the track title, artist name,
original album title and playing time,
and also an icon that represents its file
type.
A track in MP3 file format
A track in WMA (Windows Media
Audio) file format
An icon preceding the track in the Play
List indicates the play status of the
track(stopped,inplay,orplaypaused).
This icon changes among
dependingontheplaystatusofthe
track.
,
and
3 Organize the Play List button bar
button
Click on this button to clear all the
tracks from the Play List.
button
Click on this button to save the tracks
displayedonthePlayListasaplaylist,
whichgivesyouaneasywaytoaccess
thesegroupedtracksforplaybackand
transfer to your MM-RX400 player.
button
Click on the trash can to delete the
selected track from the Play List.
button
Clickonthisbuttontomoveaselected
track up in the Play List order.
button
Clickonthisbuttontomoveaselected
track down in the Play List order.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 31
USING AUDIO MANAGER
5 Player controls
Creating a play list
Provide basic functions for playing
back tracks with Audio Manager.
1 Click on the “ make a playlist”
button to open the Play List
window if it is not already open.
2 Clickonthe“ClearList”buttonto
clear the tracks already on the
Play List.
3 Click on the “Select Tracks From
Database” button.
The “Select Tracks From Database”
window appears.
You can also click on the “Select
PlaylistfromDatabase”buttoninstead
if you have already created play lists.
1 Elapsedplayingtimeindicator
2 Input level indicator
3 Balance control slider
Dragtheslidertoadjustthebalance
betweentheleftandrightspeakers.
4 Volume control slider
Drag the slider to the right or left to
adjust the volume.
5 Repeat play button
Plays the current track repeatedly.
6 Shuffle play button
Plays all tracks in random order.
7 Track Position slider
Drag the slider to start playback at
a different position within the track.
4 Select the tracks that you want to
addtothenewplaylistbyclicking
on the box to the left of each
track.
8
9
(Backward) button
Plays the previous track.
(Play) button
Starts playback of the selected
track.
To cancel the selection, click on the
box again.
0
(Pause) button
Pauses playback. To resume
playback, click on
again or
click on
.
!
@
(Stop) button
Stops playback.
(Forward) button
Plays the next track.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 ENGLISH
5 Click on “OK” when you have
finished selecting the tracks.
The selected tracks are displayed on
the Play List.
10Click on “OK.”
You can find the new play list in the
“Select Playlist From Database”
windowthatcanbeopenedbyclicking
onthe“SelectPlaylistFromDatabase”
button in the Play List window.
If there is any track that you want to
exclude from the selections, select it
and click on
.
Now you are ready to transfer the tracks
to your MM-RX400 player.
6 Click on the “Save Tracks as
Playlist” button.
The “Add Playlist” window appears.
Functions available in the “Select
Tracks From Database” window
Following operations are available in the
“Select Tracks From Database” window:
• Sort the track order by track title, artist
name, original album title or playing
time by clicking on the corresponding
column label.
• Usethe“Find:”fieldtolocateyourtarget
track easily. Click on the label of the
column that you want to search, then
type the name of the target track in the
“Find:” field that you can find under that
column.
• Edit track information by clicking on the
“Edit” button after selecting the track.
• Listen to the track by right-clicking on
the track and selecting “Play” from the
shortcut menu. This is helpful when you
are not sure that the track you selected
is correct.
7 Name the new play list and fill in
theotherinformationfieldsunder
the “Description” tab.
8 If necessary, enter information
aboutthetrackscontainedonthe
new play list in the “Edit Track
Info” dialog box that can be
opened by right-clicking on the
areawithinthelist,thenselecting
the “Edit Track...” menu
command under the “Track List”
tab.
Alsointhe“SelectPlaylistFromDatabase”
window, similar operations are available
with play lists.
9 Click on “Close” in the “Add
Playlist” window when you have
finished.
The dialog box stating that the play list
has been saved appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 33
USING AUDIO MANAGER
6 Name the new play list, fill in the
Creating a play list so that it
contains music files already
on your computer
otherfields,thenclickon“Close.”
7 Click on “OK” in the dialog box
that appears successively.
If you know where the music files
are stored
If you do not know where the
music files are stored
1 Click on the “
make a playlist”
button to open the Play List
window if it is not already open.
1 Cilck on the “ make a playlist”
button to open the Play List
window if it is not already open.
2 Clickonthe“ClearList”buttonto
2 Clickonthe“ClearList”buttonto
clear the tracks on the Play List.
clear the tracks on the Play List.
3 Clickon“AddTracks”ofthe“File”
menu to open the “Add Tracks”
dialog box.
3 Click on “Search Hard Disks for
Tracks” of the “File” menu.
All the music files stored on your
computer are automatically added to
your database and displayed on the
Play List.
Note
Ifyouabortthesearchprocess,clicking
on “Search Hard Disks for Tracks”
again will fail to add tracks and merely
display the “0 tracks successfully
added” message. “Add Tracks” of the
“File” menu will also fail and display
the same message. To recover from
this condition, restart Audio Manager.
4 Select the music files that you
want to add to the play list, then
click on “Open.”
The selected music files are
automatically added to your database
and displayed on the Play List.
You can select two or more files at
once by clicking on each one while
holding down the SHIFT or CTRL key.
4 Clickonthe“ClearList”buttonto
clear the tracks on the Play List.
5 Click on the “Select Tracks From
Database” button.
The “Select Tracks From Database”
window appears.
5 Click on the “Save Tracks as
Playlist” button.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 ENGLISH
6 Select the tracks that you want to
addtothenewplaylistbyclicking
on the box to the left of each
track, then click on “OK” when
you have finished.
Adding tracks to the
previously created play list
1 Click on the “
make a playlist”
button to open the Play List
window if it is not already open.
The selected tracks are displayed on
the Play List in the Play List window.
2 Clickonthe“SelectPlaylistsFrom
Database” button.
7 Click on the “Save Tracks as
Playlist” button.
The “Select Playlists From Database”
8 Name the new play list, fill in the
window appears.
otherfields,thenclickon“Close.”
3 Select the play list to which you
want to add the tracks by clicking
on the box to the left of the play
list, then click on the “Edit”
button.
9 Click on “OK” in the dialog box
that appears successively.
Note
Choosing the “Search Hard Disks for
Tracks” option in step 3 brings up all the
music files, including those transfer of
which the MM-RX400 player does not
support, such as .wav and RA files, to the
Play List.
The “Edit Playlist” window appears.
4 Click on the “Add Track” button
under the “Track List” tab.
The “Select Tracks From Database”
window appears.
5 Select the tracks that you want to
add to the play list by clicking on
the box to the left of each track,
then click on “OK.”
6 Click on “Close” after confirming
thattheselectedtracksareadded
to the list in the “Edit Playlist”
window.
7 Click on “Yes” in the dialog box
asking you if you really want to
save the changes.
8
Click on “OK” in the “Select
PlaylistsFromDatabase”window.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 35
USING AUDIO MANAGER
Deleting tracks from the
previously created play list
Deleting tracks and play lists
from your database
1 Click on the “
make a playlist”
button to open the Play List
window if it is not already open.
Deleting tracks from your
database
1 Click on the “ make a playlist”
button to open the Play List
window if it is not already open.
2 Clickonthe“SelectPlaylistsFrom
Database” button.
The “Select Playlists From Database”
window appears.
2 Click on the “Select Tracks From
Database” button to open the
“Select Tracks From Database”
window.
3 Select the play list from which
you want to delete the tracks by
clicking on the box to the left of
the play list, then click on the
“Edit” button.
3 Clickonthetrackthatyouwantto
deletetohighlightit,thenclickon
the “Delete” button.
The “Edit Playlist” window appears.
A dialog box appears and asks you if
you really want to delete the track.
4 Select the track that you want to
deletefromtheplaylist,thenclick
on
.
You can also use the shortcut menu
that appears when you right-click to
delete the selected track.
5 Repeat step 4, if necessary.
6 Click on “Close” when you have
finished.
NEVER check the “Delete the track
file from hard disk” option unless you
are sure you want to delete the track,
or you may lose your music files
forever.
7 Click on “Yes” in the dialog box
asking you if you really want to
save the changes.
8 Click on “OK” in the “Select
Playlists From Database”
window.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 ENGLISH
4 Click on “Yes.”
5 Repeat the procedure for the
remaining tracks.
Tip
Instead of using the “Delete” button, you
can use the shortcut menu that appears
when you right-click to delete all the
selected play lists at once.
Select the play lists you want to delete by
clicking on the box to the left of each play
list, then right-click on the area within the
list and select “Delete Tagged Playlists”
from the shortcut menu.
6 Click on “OK” when you have
finished.
Tip
Instead of using the “Delete” button, you
can use the shortcut menu that appears
when you right-click to delete all the
selected tracks at once.
Select the tracks you want to delete by
clickingontheboxtotheleftofeachtrack,
then right-click on the area within the list
and select “Delete Tagged Tracks” from
the shortcut menu.
Deleting play lists from your
database
1 Click on the “
make a playlist”
button to open the Play List
window if it is not already open.
2 Clickonthe“SelectPlaylistsFrom
Database” button to open the
“SelectPlaylistsFromDatabase”
window.
3 Click on the play list that you
want to delete to highlight it, then
click on the “Delete” button.
A dialog box appears and asks you if
you really want to delete the play list.
4 Click on “Yes.”
5 Repeat the procedure for the
remaining play lists.
6 Click on “OK” when you have
finisheddeletingalltheplaylists.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 37
USING AUDIO MANAGER
Editing track information
Playing the tracks in the play
list
You can edit track information anywhere
you can find the “Edit...” button or “Edit
track...”drop-downmenucommandwithin
Audio Manager. Suppose you are in the
“Select Tracks From Database” window.
You can click on the “Edit” button to open
the “Edit Track Info” dialog box, which
allows you to enter or select information
about the tracks listed in the window,
suchasthetracktitle,artistname,original
album title and genre.
1 Click on the “ make a playlist”
button to open the Play List
window if it is not already open.
2 Clickonthe“ClearList”buttonto
clear the tracks on the Play List.
3 Clickonthe“SelectPlaylistsFrom
Database” button.
The “Select Playlists From Database”
window appears.
4 Select the desired play list by
clicking on the box to the left of
the play list, then click on “OK.”
5 Click on the desired track, then
click on
.
Playing the tracks on the
music CD
1 Click on the “ make a playlist”
button to open the Play List
window if it is not already open.
Note
If you edit information about the tracks in
MP3 file format within Audio Manager,
track information will be saved in ID3v2
tag format.
2 Clickonthe“ClearList”buttonto
clear the Play List.
To learn more about how to work with the
“Edit Track Info” and “Edit Playlist” dialog
boxesandmeaningofthefieldscontained
inthedialogboxes,refertothe“Workwith
Tracks” book in the Online Help window.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 ENGLISH
3 Insert the music CD into the CD-
ROM drive of your computer, or
click on the “Get Tracks From
CD” button if the music CD is
already in the CD-ROM drive.
If you do not clear the list in step 2, the
“NewCDDetected”dialogboxappears
when you insert the CD into the CD-
ROM drive and asks you to select
“Play this CD,” “Append to Playlist,” or
“Cancel.”
Shortcut menus
With most of the windows of Audio
Manager, there is a shortcut menu that
appears when you right-click. Right-
clicking on a track or play list opens a
shortcut menu that allows you to easily
select a frequently used command.
Below is the shortcut menu opened by
right-clickingonthetracklistedinthePlay
List window.
• Click on “Play this CD” to delete the
current entries on the Play List and
replace them with the tracks on the
CD. The CD will begin playing.
• Click on “Append to Playlist” to add
the tracks on the CD to the tracks
already on the Play List.
Note
Any grayed-out menu command is
disabled. So you cannot select it.
4 Thetrackscontainedonthemusic
CDaredisplayedonthePlayList.
If you did not check the “Always get
title from CDDB when CD is inserted”
option, a dialog box appears and
prompts you to obtain information
about the inserted music CD
automatically. If you want to get
information about the music CD, click
on “Yes.” Otherwise, click on “No.”
Note
You must have Internet access to use
CDDB.
5 Click on the desired track, then
click on
.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 39
USING AUDIO MANAGER
Transferring tracks to the MM-RX400 player
To enjoy listening to music on the MM-RX400 player, you must transfer music files stored
onyourcomputertoyourMM-RX400player.YoucanuseAudioManagertotransferMP3
files as well as WMA (Windows Media Audio) files to the MM-RX400 player.
Copy to Devices window
The Copy to Devices window allows you to select tracks or play lists from your database
and transfer them to your MM-RX400 player.
This window also provides the facility to manage the portable player connected to your
computer such as formatting memory media on the portable player and deleting tracks
from the memory media.
1
4
5
2
6
7
3
1 Devices window button bar
button
Click on this button to select desired
play lists from your database and add
them to the Transfer List.
button
Click on this button to select desired
tracks from your database and add
them to the Transfer List.
button
Click on this button to start transfer.
Download from Www.Somanuals.com. All Manuals Search And Download.
40 ENGLISH
2 Transfer List
4 Memory media drop-down list
Displays the currently selected
memory media. If your MM-RX400
player has a MultiMediaCard in the
slot, select either “Internal Memory
(Flash)” or “External Memory (MMC)”
to which you wish to transfer tracks by
Displays the list of the tracks you have
selected from your database for
transfer to your MM-RX400 player.
Each track has information such as
the playing time, size, track title and
artist name, and also an icon that
represents its file type.
clicking on
.
A track in MP3 file format
A track in WMA file format
An icon preceding the track on the
Transfer List indicates the play status
of the track (stopped, in play, or play
paused). This icon changes among
5 Device Usage bar
Gives you a graphic representation of
current memory usage status of the
memorymediaselectedinthe“Media:”
field.
6 Portable Track List
,
and
depending on the play
Displaysthelistofthetracksstoredon
the currently selected memory media
including the track title and size for
each track.
status of the track.
3 Organize the Transfer List button
bar
button
Click on this button to clear all the
tracks from the Transfer List.
button
Click on this button to save the tracks
displayed on the Transfer List as a
play list, which gives you an easy way
to access these grouped tracks later.
button
Click on the trash can to delete the
selected track from the Transfer List.
button
Clickonthisbuttontomoveaselected
track up in the Transfer List order.
button
Clickonthisbuttontomoveaselected
track down in the Transfer List order.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 41
USING AUDIO MANAGER
7 Portable Track List button bar
Transferring tracks to the
MM-RX400 player
Before starting
• BeforeconnectingtheMM-RX400player
toyourcomputer,besuretofullycharge
the battery.
button
Click on this button to redisplay the
Portable Track List to match the
contents of the selected memory
media.
button
• CheckthattheinternalFlashMemoryor
MultiMediaCard has enough available
memory to store the transferred tracks.
You can find this information in the
Device Usage bar.
• Checkthatfilestobetransferredarenot
encoded with a bit rate or sampling
frequency outside the range supported
by the MM-RX400 player. For more
informationaboutthesupportedbitrates,
see page 61.
• The following actions are strictly
prohibitedwhiletransferringmusicfiles.
Doing so may cause not only the
computer to freeze up but also the
memory media to be damaged.
— Disconnecting the USB cable from
the MM-RX400 player or the
computer
Clickonthisbuttontodisplayinformation
about restrictions on transferring music
files to the MM-RX400 player.
button
Click on this button to initialize the
memory media (internal and external)
on the MM-RX400 player.
You can usefully use this button when
you want to delete all the tracks from
the memory media.
button
Click on the trash can to delete the
selectedtrackfromthePortableTrack
List.Notethatthiscausesthetracknot
only to disappear from the list but also
to be deleted from the memory media.
button
— Removing the battery from the MM-
RX400 player
— Removing the MultiMediaCard from
the MM-RX400 player
Clickonthisbuttontomoveaselected
track up in the Portable Track List
order.
button
1 Connect your MM-RX400 player
to your computer (page 15).
Clickonthisbuttontomoveaselected
track down in the Portable Track List
order.
2 Turn on the player by holding the
e/s button pressed until
“CONNECT USB” appears on the
display of the MM-RX400 player.
Download from Www.Somanuals.com. All Manuals Search And Download.
42 ENGLISH
Note
8 Select the tracks that you want to
transfer to the MM-RX400 player
by clicking on the box to the left
of each track, then click on “OK.”
Youwillbenotifiedifyouhaveselected
too many tracks for the selected
memory media.
If you connect the USB cable to the
MM-RX400 player while it is in FM
radio reception mode, the player does
not detect that the USB cable has
beenconnected.SwitchtotheMemory
audio player mode by holding the
e/s button pressed or turn on the
player after turning it off.
3 Click on the “ copy to devices”
button to open the Copy to
Deviceswindowifitisnotalready
open.
4 Click on
to the right of the
“Media:”fieldandselect“Internal
Memory (Flash)” or “External
Memory (MMC)” from the drop-
down list.
If this dialog box appears, you must
delete one or more tracks from the
Transfer List or Portable Track List
untilthetotalsizeoftheselectedtracks
falls below the available memory of
the memory media.
Note
If you select the MultiMediaCard as a
memory media, it takes more time to
finish transferring tracks.
9 Click on “Close” to close the
dialog box.
5 Format the selected memory
media if necessary (page 46).
10Delete the tracks one at a time
until the red portion of the Device
Usage bar disappears (page 45)
6 Click on the “Clear List” button if
any tracks are listed on the
Transfer List.
byclickingon
afterselecting
the track on the Transfer List or
Portable Track List.
7 Click on the “Select Tracks From
Database” button.
The “Select Tracks From Database”
window appears.
Tip
If you have created a play list that
contains the tracks selected for
transfer, you can select the play list
from the “Select Playlists From
Database”windowthatcanbeopened
by clicking on the “Select Playlists
From Database” button.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 43
USING AUDIO MANAGER
11When you are all right with your
selection, click on the “Copy To
Portable” button.
12Click on “OK” when the message
“Finished transferring tracks” is
displayed.
Transfer of the selected tracks starts
andthe“Sendingtodevice”dialogbox
appears, where you can see the
transfer status of each track and the
track title currently being transferred.
On the MM-RX400 player, “NOW
DOWNLOADING PLEASE WAIT”
remains displayed while transfer is in
progress.
Your MM-RX400 player is now ready for
playback.
Note
• The track currently being played back
cannotbetransferredtotheMM-RX400
player.
• Youareconstrainedtoplayingthetracks
on the MultiMediaCard on the original
MM-RX400 player that was used to
transfer music files.
• Music files cannot be restored to your
computer after they have been
transferred to the MM-RX400 player.
•
ThefilenameextensionofanMP3filewill
be changed from “.mp3” to “.mpm”
becauseofcopyrightprotectionmeasures
after transferring it to the MM-RX400
player.
Tracks are transferred to your MM-
RX400 player in the order they appear
on the Transfer List.
To cancel transfer, click on the “Abort”
button of the dialog box.
• Up to 99 music files can be transferred
to each internal Flash Memory and the
MultiMediaCard. However, the number
ofmusicfilesthatcanbeplayedbackon
the MM-RX400 player is limited to 99,
starting from a music file stored on the
internal Flash Memory.
Note
If you transfer the selected tracks to
memory media that contain one or
more files, transfer is not performed in
the order tracks are listed. The size of
each track selected is compared
against that of the remaining available
memory each time before starting
transfer of a track, and the track the
size of which best fits the remaining
available memory is transferred.
Transferstopswhennotenoughspace
to store any of the remaining tracks
remains on the memory media.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 ENGLISH
Viewing current memory
usage status of the memory
media
Increasing the number of
files that can be transferred
to the MM-RX400 player
The Device Usage bar located on the
right pane of the Copy to Devices window
gives you color-coded representation of
current memory usage status of the
selected memory media.
You can transfer more files to the MM-
RX400 player by selecting a bit rate lower
thanthatofthetracksselectedfortransfer.
1 Click on “Options” of the “View”
menu to open the “Options”
dialog box.
2 Click on
to the right of the “Bit
Rate:” field, then select a bit rate
lower than that used to encode
the selected tracks under the
“Read CD” tab.
This causes the files to be reduced in
size,resultinginincreasingthenumber
of files to be stored on the memory
media.
• Green
The amount of memory currently being
used on the memory media
• Yellow
The amount of memory necessary for
transferring the selected tracks
• Gray
The amount of available memory
remainingaftertransferringtheselected
tracks
• Red
The amount of memory shortage when
all the selected tracks are transferred
Deleting tracks from the
memory media
1 Clickonthetrackthatyouwantto
delete from the Portable Track
List.
2 Click on
.
The selected track is deleted from the
memory media.
You can also right-click on the track,
thenselect“Remove”fromtheshortcut
menu.
Tip
Ifyouwanttodeleteallthetracksfromthe
memory media, you may use the “Format
Media” button.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 45
USING AUDIO MANAGER
5 Click on
to the right of the
Formatting the internal Flash
Memory and MultiMediaCard
Before starting
• Formatting the memory media erases
all contents stored on it.
“Media:” field and select the
desired memory media “Internal
Memory (Flash)” or “External
Memory (MMC)” from the drop-
down list.
• The following actions are strictly
prohibited while formatting the memory
media. Doing so may cause not only the
computer to freeze up but also the
memory media to be damaged.
— Disconnecting the USB cable from
the MM-RX400 player or the
computer
6 Click on the “Format Media”
button.
The following dialog box appears.
— Removing the battery from the MM-
RX400 player
— Removing the MultiMediaCard from
the MM-RX400 player
7 Click on “OK” if you are sure you
want to format the selected
memory media.
When“NOWFORMATTINGPLEASE
WAIT” changes to “FORMAT
COMPLETED!” on the MM-RX400
player, formatting is completed.
• Check that there is sufficient power
remaining.
1 Connect the MM-RX400 player to
the computer with the supplied
USB cable (page 15).
If it is a MultiMediaCard that you want
to format, insert it into the MM-RX400
player before connecting the MM-
RX400 player to the computer.
2 Turn on the player by holding the
e/s button pressed until
“CONNECT USB” appears on the
display of the MM-RX400 player.
3 Double-click on the
(Audio
Manager) icon on the desktop.
4 Click on the “ copy to devices”
button to open the Copy to
Deviceswindowifitisnotalready
open.
Download from Www.Somanuals.com. All Manuals Search And Download.
46 ENGLISH
USING THE MM-RX400 PLAYER
Player overview
Main unit
1 PRESET –/AREA/PLAY MODE
button
3 PRESET +/A-B/MEMORY/SET
button
• Press during playback to select the
desired play mode from among
NORMAL,1REPEAT,ALLREPEAT,
RANDOM, and RANDOM REP.
• Press during Radio Reception or
Station Preset mode to select the
desired preset station number or a
• Press during playback to set A-B
repeat playback.
• Press during Radio Reception or
Station Preset mode to enter/exit
Station Preset mode, or to select the
desired preset station number.
4 HOLD switch
receiving system (US or EU)*.
* Asetofafrequencyrangeandafrequency
interval
When the player is not being used, set
it to the HOLD position to prevent
unintentional operation.
2 e(play/pause)/s (off) button
• Press to put the player in playback
pause, or to start playback during
radio reception.
• Press and hold to turn the power on
and start playback, or to turn the
power off.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 47
USING THE MM-RX400 PLAYER
5 Multi Jog
9 Display window (page 50)
• Turn up or down during playback to
skip to the beginning of the desired
track.
0 \(Headphones)jack(stereomini-
jack)
Used to connect the supplied
• Turn up or down during radio
reception to tune in to the desired
frequency.
• Press and hold to turn the power on
in Radio Reception mode, or to turn
the power off.
headphones or remote control.
! USB port connector
Used to connect the series B (smaller)
connector of the supplied USB cable
to the player and the series A (larger)
connector to the USB port of your
computer.
• Press to start radio reception during
playback.
@ Battery compartment cover
# MultiMediaCard slot
6 VOLUME +/– button
• Press to increase or decrease
volume. Each time you press the
button, volume increases or
decreases by one step.
• Press and hold to continuously
increase or decrease volume.
• Volume is adjusted between 0 and
20.
Note
If you adjust the volume between the
level of 14 and 20, it is automatically
set to 13 when you turn the power on
after turning it off.
7 FM MODE/DISPLAY switch
• Slide during playback to select the
display mode between TITLE (track
title,etc.) or TIME (elapsed playing
time of the current track).
• Slideduringradioreceptiontoselect
the reception mode between
STEREO and MONO (monaural).
8 AUTO PRESET/DTP button
• Press repeatedly during playback to
select the desired DTP (Digital Tone
Processor) mode.
• Pressandholdduringradioreception
topresetradiostationsautomatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
48 ENGLISH
Remote control
1 VOL (Volume) control
5 HOLD switch
Turn to adjust the volume. Make sure
that you cannot turn up the volume
with the VOL control higher than the
volume set with the player’s VOLUME
+/– buttons.
6 RADIO ON/DTP button
• Press and hold to turn the power on
in Radio Reception mode or start
radio reception during playback.
• Press repeatedly during playback to
select the desired DTP (Digital Tone
Processor) mode.
2 \ jack (stereo mini-jack)
Used to connect the supplied
headphones.
7 r/t buttons, PRESET +/–
buttons
3 e (play/pause) button
• Press and hold to turn the power on
and start playback.
• Press repeatedly during playback to
skip to the beginning of the desired
track.
• Press repeatedly during radio
receptiontoselectthedesiredpreset
station.
• Press to put the player in playback
pause, to start playback again, or to
startplaybackduringradioreception.
4 s (off)/RADIO OFF button
Press to turn the power off.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 49
USING THE MM-RX400 PLAYER
Display window
During playback
During radio reception
1 Play mode indicator
5 Preset station number indication
2 DTP (Digital Tone Processor)
6 FM MONO (monaural) indicator
Shows the FM MODE switch is set to
the MONO position.
indication
3 Battery indicator
Displays the remaining battery power.
7 Frequency indication
4 Main indication
Displaysthetracknumberandelapsed
playing time of the current track when
the DISPLAY switch is set to the TIME
position.
Displays the track title of the current
track when the DISPLAY switch is set
to the TITLE position.
Note
During playback of WMA-format files,
timer display may show irregular
behavior, especially when you skip to
another track.
Download from Www.Somanuals.com. All Manuals Search And Download.
50 ENGLISH
Using the player
Current track No.
Playing back tracks
1
Elapsed playing time of the current
track
Multi Jog
3 Adjust the volume with the
3
2
VOLUME + or – button.
Note
The MM-RX400 player allows you to play
back up to 99 music files that have been
stored on it.
2
3
To turn the power off
Press and hold the e/s button until
“GOOD-BYE!!” appears on the display.
To put the player in playback pause
Before starting
Release the HOLD switch to activate the
player buttons.
Pressthee/sbuttonduringplayback.
To resume playback, press the e/s
button again.
1 Connect the supplied remote
controlwithheadphonestothe\
jack on the player.
To search for a track
You can connect the headphones
directly to the \ jack as well.
Turn the Multi Jog up or down repeatedly
during playback or playback pause until a
desired track is located.
2 Pressandholdthee/sbutton
until “HELLO!” appears on the
display.
To search for a point of a track
Playbackstartsautomaticallyfromthe
beginning of the track that was played
back last time.
During playback, hold turning up or down
the Multi Jog until the desired point of the
track is located.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 51
USING THE MM-RX400 PLAYER
Selecting a play mode
Playing a desired portion of
a track repeatedly (A-B
Repeat Playback)
PLAY MODE
Press the PLAY MODE button
repeatedlyduringplaybacktoselect
the desired play mode.
1,2
1 Press the A-B button at the
beginningofyourdesiredportion
during playback.
Select
To play
NORMAL
All the recorded tracks in
order.
When you are using the
player with a
MultiMediaCard loaded,
playback starts from the
Flash Memory, and then
proceeds to the
“A ” appears on the display.
2 PresstheA-Bbuttonattheendof
your desired portion during
playback.
The player starts to play the portion
between points A and B repeatedly.
MultiMediaCard after the
last track in the Flash
Memory ends.
To cancel A-B Repeat Playback
Press the A-B button during A-B repeat
playback.
1 REPEAT
ALL REPEAT
RANDOM
The current track
repeatedly
All recorded tracks
repeatedly
All recorded tracks in
random order
RANDOM REP All recorded tracks in
random order repeatedly
Download from Www.Somanuals.com. All Manuals Search And Download.
52 ENGLISH
Selecting equalizer settings
to suit tracks
Changing the track
information
DTP
DISPLAY
Set the DISPLAY switch to TITLE or
TIME during playback.
Set the switch to To show
DTP
TITLE
TIME
The track title*
Press the DTP button repeatedly
during playback to select your
desiredDTP(DigitalToneProcessor)
mode from among ROCK, POP,
JAZZ, and CLASSIC.
The elapsed playing
timeofthecurrenttrack
* Texttoolongtodisplayscrollssothatyoucan
read all of it. The scrolling repeats as long as
the track plays.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 53
USING THE MM-RX400 PLAYER
Note
Selecting the AREA setting
before you use the player
IfyoudonotpresstheAREAbuttonwithin
about 10 seconds after selecting your
desired setting, the former setting is
restored, and your selection is not
registered.
Listening to a radio program
(Manual Tuning)
1
Before listening to a radio program, make
sure the USB cable is not connected to
the MM-RX400 player. If it is, you cannot
expect satisfactory radio reception.
2,3,4
1
Radiobroadcastshavedifferentfrequency
ranges and change in different steps in
different countries.
Theplayerhastwoworldreceptionareas:
US (North and South America) and EU
(Europe).
1,2
FM MODE
3
1 Press and hold the Multi Jog until
radio reception display appears
on the display.
3
2 Press and hold the AREA button
until “US” or “EU” flashes on the
display.
RADIO OFF
1
3 PresstheAREAbuttonrepeatedly
to select the desired setting.
1 Press and hold the Multi Jog until
radio reception display appears
on the display.
4 Press and hold the AREA button
until the radio reception display
appears again on the display.
2 Turn up or down the Multi Jog
repeatedly to tune in to your
desired station.
Download from Www.Somanuals.com. All Manuals Search And Download.
54 ENGLISH
3 Adjust the volume with the
Presetting stations
automatically (Auto Preset)
VOLUME + or – button.
To turn the power off
PressandholdtheMultiJoguntil“GOOD-
BYE!!” appears on the display.
To tune in to a station quickly (Auto
Tuning)
AUTO PRESET
Hold the Multi Jog to turn up or down until
the frequency starts and continues to
increaseordecrease. Theplayertunesin
to the next receivable station to the
frequency from which you started Auto
Tuning.
However, the Auto Tuning may not stop
and will instead continue to search for a
strong station if the broadcast signals are
weak. If you want to try tuning in a weak
station, turn up or down the Multi Jog
repeatedly to cancel Auto Tuning, then
tune in to the station manually.
Press and hold the AUTO PRESET
button during radio reception until
“AUTO PRESET” appears on the
display.
The player presets up to 20 receivable
stations automatically. After Auto Preset
is complete, the player tunes in to the
station stored on the preset number “01.”
For better reception
Note
When broadcast signals are very weak,
stations cannot be preset automatically.
Insuchacase,presetthedesiredstations
manually.
The headphone cord also functions as
the FM antenna. Keep it extended.
If stereo reception is poor
Set the FM MODE switch to the MONO
position.
The reception may improve, but sound
will not be in stereo.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 55
USING THE MM-RX400 PLAYER
Presetting stations manually
(Manual Preset)
Listening to a preset station
1
3
2
3
2,3,4
3
1 Tune in to a desired station.
2 Press and hold the MEMORY
button until the preset number
flashes on the display.
1
RADIO OFF
2
3 Press the PRESET + or – button
repeatedly to select the desired
preset number.
1 Press and hold the Multi Jog until
radio reception display appears
on the display.
4 Press and hold the MEMORY
button until the preset number
stops flashing on the display.
2 Press the PRESET + or – button
repeatedly to select the desired
preset station.
3 Adjust the volume with the
To preset two or more stations
Repeattheprocedurefromthebeginning.
VOLUME + or – button.
To turn the power off
To erase all preset stations
PressandholdtheMultiJoguntil“GOOD-
BYE!!” appears on the display.
Press and hold the PRESET – button and
Multi Jog simultaneously until “PRESET
MEMORY INITIALIZED” appears on the
display.
Download from Www.Somanuals.com. All Manuals Search And Download.
56 ENGLISH
APPENDIX
Specifications
Storage media Built-in 32MB Flash Memory
MultiMediaCard slot for a
removable 16MB, 32MB or
64MB MultiMediaCard
Maximum output level
5 mW + 5 mW (32 ohms)
Frequency range
Display
PC interface USB cable
Maximum outside dimensions
Graphic LCD (69 × 32 dots)
41.6 mm (W) × 90.5 mm (H)
× 22.8 mm (D) (not including
projecting parts and controls)
Approx. 72 g without battery
Weight
20 Hz – 20 kHz
US: 87.5 MHz – 108.1 MHz
(200 kHz steps)
EU: 87.5 MHz – 108.0 MHz
(50 kHz steps)
Accessories USB cable (1)
Battery charger (1)
FM tuner
Rechargeable battery (1)
32MB MultiMediaCard (1)
Installation CD-ROM (1)
Remote control (1)
Stereo headphones (1 set)
Carrying case (1)
Power supply 1.2 V DC using the supplied
MHB-901 Ni-MH
rechargeable battery
Continuous playing time with a fully
charged battery
* Playerspecificationsandexternalappearance
are subject to change without notice.
Approx. 5 hours for
MP3/WMA play
Frequently asked questions
What is WMA?
General questions
Windows Media Audio is an audio format
developed by Microsoft Corporation in
order to distribute CD-quality music even
via low-speed communication lines such
as ISDN. WMA employs a more efficient
compression method than MP3, and has
theadvantageofreducingthebitratewith
the least loss of sound quality (80 kbps
encodingresultsinalmostthesamesound
quality as MP3 encoded at 128 kbps).
WMA is a format suitable for portable
players with limited memory. WMA also
providesthemechanismthatallowsmusic
files to contain encrypted data such as
copyright-protection information in them
incombinationwithWindowsMediaRights
Manager.
What is MP3?
MPEG-1 Audio Layer 3, one of most
popular audio formats. It compresses
standard audio tracks into much smaller
sizes without significantly compromising
sound quality. Since the MP3 file format
has no mechanism for copyright
protection, it is not widely used by
commercial music data distribution sites.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 57
APPENDIX
What is the bit rate?
What is SDMI?
Data flow per second denoted by “kbps.”
Audio Manager allows you to select a bit
rate of 160, 128, 96, 80, or 64 kbps for
WMAformatencodingand320,256,192,
128, 96, 80, or 64 kbps for MP3 format
encoding.
TheSecureDigitalMusicInitiative,aforum
founded to develop technological
specifications for enabling the secure
distribution and use of music in digital
form, as well as providing copyright
protection for artists’ work.
SDMI-compliant music files have the
following transfer restrictions:
• Youcancopyamusicfileasmanytimes
as the information encrypted in the file
allows.
• You can transfer a music file to up to 3
SDMI-compliant portable players only
from the computer that was used to
download or record the file.
When a music file is downloaded from
an SDMI-compliant music data
distribution site, the number of players
to which you can transfer the music file
isgovernedbytheinformationcontained
in the file.
What is a variable bit rate (VBR)?
The variable bit rate (VBR) encoding
method allocates fewer bits to silent
sections or those with relatively narrow
stereoseparation,andallocatesadditional
bits to sections that have relatively wide
stereo separation. The constant bit rate
encoding method uses a consistent bit
rate throughout an encoded file. VBR
allows smaller encoded file sizes without
compromising sound quality. However,
VBR is not recommended if you want the
MP3playertoreportaccurateinformation
about the duration of MP3 files, since it is
difficult to predict MP3 file size.
• You can play a music file stored on a
MultiMediaCard if the player unit is the
same one that was used to transfer the
music file.
What is the CDDB?
A
database server that provides
information about a music CD in your
computer’s CD-ROM drive. CDDB-
enabled encoding software will search
the CDDB database on the Internet for
information about your music CD, such
as the album title, artist names, and track
titles, and automatically enter the
information to its track list. You do not
have to manually enter information about
your music CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
58 ENGLISH
The volume level differs among
tracks.
Questions about the
MM-RX400 player
The volume level of the encoded music
files depends on the music source and
the software used for encoding.
You need to adjust the volume level
manually on the player, because the
encoding software usually does not
support a function to adjust the volume
level.
How do I expand the memory?
TheMM-RX400playerincorporates32MB
of Flash Memory. You can add memory
by installing a MultiMediaCard (64MB,
32MB or 16MB).
Can files on a MultiMediaCard that
have been written to by an
MM-RX400 player be played back
on another portable player?
No,theycannotbeplayedbackonanother
portable player.
Can I use the MM-RX400 player
with a Macintosh computer?
No, you cannot. The MM-RX400 player
does not support Macintosh computers.
How many minutes of music files
can an MM-RX400 player hold?
It depends on the amount of installed
memoryandthebitrateusedforencoding.
If you select “96 kBit/s, Near CD, 15:1
reduction” in the “Options” dialog box for
encoding WMA (page 24), the supplied
32MB MultiMediaCard, in combination
with the internal Flash Memory, allows
you to store about 80 minutes of music
files. The time is reduced to about 60
minutes with the “128 kBit/s, CD Quality,
11.25:1 reduction.”
How long does the battery last?
Afullychargedbatterylastsabout5hours
for MP3/WMA play.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 59
APPENDIX
Troubleshooting
If you encounter a problem while using
the MM-RX400 player, try the remedial
actions listed below. Should the problem
persist, consult the store where you
purchased the MM-RX400 player or your
nearest AIWA dealer.
Various troubles with playback
• “NO FILE” is displayed on the MM-
RX400 player. You may have failed to
transfer music files to the MM-RX400
player.
O
Check the USB cable connection
andremainingbatterypower,andtry
to transfer music files to the
MM-RX400 player again (page 42).
The buttons are not functional.
O
Check to see if the HOLD switch is
set to the HOLD position (page 47).
Check to see if the rechargeable
battery is installed properly (page
13).
• Some parts of a data stream may be
damagedbecauseofpowerfluctuations
while transferring music files.
O
O
Format the memory media using the
formatfunctionofthesuppliedAudio
Manager software (page 46).
Check if the 0 and 9 poles of the
rechargeable battery are properly
aligned.
• The player cannot play tracks that are
stored on the MultiMediaCard.
O
O
Check to see if the rechargeable
battery needs recharging (page 13).
Check to see if memory status is all
right.
O
Check that the MultiMediaCard has
been inserted into the card slot
properly (page 14).
Format the memory media using the
formatfunctionofthesuppliedAudio
Manager software (page 46).
If the problem persists, remove the
battery, then reinstall it to reset the
player (page 13).
Push the MultiMediaCard into the
card slot until it is locked, holding it
with the beveled corner to the right.
Check that you are not using a
MultiMediaCardwrittentoby another
player.
You can only play a MultiMediaCard
on the MM-RX400 player that was
used to transfer the music files.
O
O
This often helps solve a problem.
Nothing or unusual action on the
display
O
Check to see if the rechargeable
battery needs recharging (page 13).
Remove the battery, then reinstall it
to reset the player (page 13).
O
This often helps solve a problem.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 ENGLISH
The MM-RX400 player does not
play tracks.
• The MM-RX400 player supports WMA
and MP3 files encoded with one of the
following bit rates and sampling
frequency.
– WMA files encoded with a bit rate of
64, 80, 96, 128, or 160 kbps and a
sampling frequency of 44.1 kHz
– MP3filesencodedwithabitrateof64,
80, 96, 128, 160, 192, 256, or 320
kbps and a sampling frequency of 22
kHz to 48 kHz
Files other than WMA- or MP3-format
filesmaynotbeplayedbackontheMM-
RX400playereveniftheyaretransferred
to the player. Even files in WMA or MP3
file format may not be played back, if
they are encoded with a bit rate or
sampling frequency outside the range
supported by the MM-RX400 player.
With some files, the elapsed
playing time indicated on the
display is not accurate, and sound
skip occurs.
• Filesencodedwithabitrateorsampling
frequency outside the range supported
by the MM-RX400 player may cause
inaccuracy of elapsed playing time
indicatedonthedisplayandsoundskip.
O
Retransfer the files after encoding
themwithanappropriatebitrateand
sampling frequency.
* This problem may still remain with some
files even if they are encoded with an
appropriatebitrateandsamplingfrequency.
• MP3 files that are encoded with VBR
(variable bit rate) also may cause
inaccuracy of elapsed playing time
indicatedonthedisplayandsoundskip.
O
Retransfer the files after encoding
them with a constant bit rate.
* This problem may still remain with some
fileseveniftheyareencodedwithaconstant
bit rate.
O
Retransfer the files after encoding
them using WMA or MP3 file format
with an appropriate bit rate and
sampling frequency, if possible.
• Some MP3 files that are encoded with
VBR(variablebitrate)maynotbeplayed
back on the MM-RX400 player.
O
Retransfer the files after encoding
them with a constant bit rate.
•
Somefilesthatareencodedwithencoding
software other than Audio Manager or
WindowsMediaPlayer7maycausepoor
playback on the MM-RX400 player.
O
Retransfer the files after encoding
them with Audio Manager or
Windows Media Player 7.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 61
APPENDIX
Your computer does not recognize
the MM-RX400 player.
Some music files that have been
downloaded for free via the
• “CONNECT USB” does not appear on
the MM-RX400 player display.
Internet cannot be transferred to
the MM-RX400 player.
O
Check that the USB cable is
connectedproperlytotheplayerand
computer ports (page 15).
Check that the player is not
connected to a port on a cascaded
USB hub.
If the player is connected to the USB
hub, disconnect the player and
connect to an available USB port on
your computer directly.
• Some free downloadable music files
may not be transferred to the
MM-RX400 player, because of
restrictions written in the files.
O
You cannot tune in to any station.
• The AREA setting is not the right one for
your receiving area.
O
Select the right setting.
The reception is distorted or has a
hum.
• The MM-RX400 player display shows
“LOW BATT.”
O
O
Set the FM MODE switch to the
Charge the battery or replace the
battery with a fully charged one.
MONO position.
Youmayhearthesoundmoreclearly,
but it will not be in stereo.
• AudioManagerdoesnotdetecttheMM-
RX400 player. Either the internal Flash
Memory or the MultiMediaCard on the
MM-RX400 player does not appear on
the Memory Media drop-down list of the
Copy to Devices window.
AIWA Co., Ltd. will not be responsible for
any loss or damage of music files due to
their transfer to the MM-RX400 player.
O
Try restarting Audio Manager.
Cannot transfer music files.
O
O
Check that the USB cable is
connectedproperlytotheplayerand
computer ports (page 15).
Checkthatthereissufficientavailable
memoryintheinternalFlashMemory
or MultiMediaCard.
You can view available memory on
the Device Usage bar located in the
right pain of the Copy to Devices
window (page 45).
O
O
Check that the rechargeable battery
still has power (page 13).
Iftheremainingpowerisinsufficient,
“LOWBATT”appearsonthedisplay.
Check the file format of the music
filestobetransferred.AudioManager
supports WMA and MP3 file formats
for transfer.
Download from Www.Somanuals.com. All Manuals Search And Download.
62 ENGLISH
Messages
The table shows the messages displayed on the MM-RX400 player.
Display
Description
HOLD
Displayed when any operation button other than the
FM MODE/DISPLAY switch is pressed while the
HOLD switch is in the “HOLD” position.
CONNECT USB
LOW BATT
Displayed when the MM-RX400 player is connected
to a computer with the supplied USB cable.
Displayed if the remaining power of the battery is
insufficient.
NOW DOWNLOADING PLEASE WAIT Displayed while transfer of music files is in progress.
DOWNLOADING COMPLETED!
Displayed when transfer of music files is finished.
NOW FORMATTING PLEASE WAIT
Displayed while formatting of the internal Flash
Memory or MultiMediaCard is in progress.
FORMAT COMPLETED!
Displayed when formatting of the internal Flash
Memory or MultiMediaCard is finished.
INTERNAL MEMORY ERROR
EXTERNAL MEMORY ERROR
Displayed when an error has occurred with the
internal Flash Memory.
Displayed when an error has occurred with the
MultiMediaCard in the card slot.
CAN’T PLAY
Displayed when access to a music file is rejected.
NO FILE
Displayed if no file is found in memory media when
the power is turned on.
MMC ID INCORRECT CAN’T PLAY
DisplayedwhenaMultiMediaCardusedwithanother
MM-RX400 player is installed.
YoucanonlyusetheMultiMediaCardafterformatting
it on this player.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH 63
NOTE
FOR USE IN THE U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledand
usedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Modifications or adjustments to this product, which are not expressly approved by the
manufacturer, may void the user’s right or authority to operate this product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference; and (2) this device must accept
any interference received, including interference that may cause undesired operation.
For assistance and information,
call toll free 1-800-BUY-AIWA. (United States and Puerto Rico)
8A-HZ5-901-01
010521AYO-OX
Printed in Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
|