Aiwa DVD Player XD AX10 User Manual

3-081-707-11(1)

CD/DVD

Player

Operating Instructions

For customers in the U.S.A

Owner’s Record

The model and serial numbers are located at the rear of the unit.

Record the serial number in the space provided below. Refer to them

whenever you call upon your Aiwa dealer regarding this product.

Model No. XD-AX10

Serial No.______________

For assistance and information

visit us on the internet at

www.us.aiwa.com

call toll free 1-800-BUY-AIWA

For Customers in Canada

If this product is not working properly, please call 1-877-869-2492 for

Peace of Mind Warranty Replacement service.

For other product related questions please contact our Customer

Information Service Centre at 1-877-869-2492 or write to us at:

Customer Information Service 115 Gordon Baker Road, Toronto,

Ontario, M2H 3R6

XD-AX10

Download from Www.Somanuals.com. All Manuals Search And Download.

For the model supplied with the AC plug

adaptor

If the AC plug of your unit does not fit into

the wall autlet, attach the supplied AC plug

adaptor.

Precautions

• The power requirements and power

consumption of this player are indicated on

the back of the player. Check that the

player’s operating voltage is identical with

your local power supply.

MODEL NO.

On operation

AC 00V 00Hz

NO.

Power requirements t

• If the player is brought directly from a cold

to a warm location, or is placed in a very

damp room, moisture may condense on the

lenses inside the player. Should this occur,

the player may not operate properly. In this

case, remove the disc and leave the player

turned on for about half an hour until the

moisture evaporates.

0-000-000-00

On safety

• Caution – The use of optical instruments

with this product will increase eye hazard.

• To prevent fire or shock hazard, do not

place objects filled with liquids, such as

vases, on the apparatus.

• Should any solid object or liquid fall into

the cabinet, unplug the player and have it

checked by qualified personnel before

operating it any further.

• When you move the player, take out any

discs. If you don’t, the disc may be

damaged.

On adjusting volume

Do not turn up the volume while listening to

a section with very low level inputs or no

audio signals. If you do, the speakers may be

damaged when a peak level section is played.

On power sources

• The player is not disconnected from the AC

power source as long as it is connected to

the wall outlet, even if the player itself has

been turned off.

On cleaning

Clean the cabinet, panel, and controls with a

soft cloth slightly moistened with a mild

detergent solution. Do not use any type of

abrasive pad, scouring powder or solvent

such as alcohol or benzine.

• If you are not going to use the player for a

long time, be sure to disconnect the player

from the wall outlet. To disconnect the AC

power cord, grasp the plug itself; never pull

the cord.

• Should the AC power cord need to be

changed, have it done at a qualified service

shop only.

On cleaning discs

Do not use a commercially available cleaning

disc. It may cause a malfunction.

On placement

IMPORTANT NOTICE

• Place the player in a location with adequate

ventilation to prevent heat build-up in the

player.

• Do not place the player on a soft surface

such as a rug that might block the

ventilation holes.

• Do not place the player in a location near

heat sources, or in a place subject to direct

sunlight, excessive dust, or mechanical

shock.

Caution: This player is capable of holding a

still video image or on-screen display image

on your television screen indefinitely. If

you leave the still video image or on-screen

display image displayed on your TV for an

extended period of time you risk permanent

damage to your television screen. Plasma

Display Panel televisions and projection

televisions are susceptible to this.

If you have any questions or problems

concerning your player, please consult your

nearest Aiwa dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Welcome!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

About This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

This Player Can Play the Following Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes about the Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Index to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Guide to On-Screen Displays (Control Bar). . . . . . . . . . . . . . . . . . . . . . . . . . 13

Hookups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Hooking Up the Player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Step 1: Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Step 2: Inserting Batteries into the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Step 3: Connecting the Video Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Step 4: Connecting the Audio Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Step 5: Connecting the Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Step 6: Quick Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Playing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Playing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Resuming Playback from the Point Where You Stopped the Disc

(Disc Resume) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Using the DVD’s Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Playing VIDEO CDs with PBC Functions (PBC Playback) . . . . . . . . . . . . . . 29

Playing an MP3 Audio Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Various Play Mode Functions (Program Play, Shuffle Play, Repeat Play,

A-B Repeat Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Searching for a Scene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Searching for a Particular Point on a Disc (Scan, Slow-motion Play,

Search, Freeze Frame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Searching for a Title/Chapter/Track/Scene, etc. (Search mode) . . . . . . . . . . 37

Viewing Information About the Disc . . . . . . . . . . . . . . . . . . . . . . . 39

Checking the Playing Time and Remaining Time . . . . . . . . . . . . . . . . . . . . . 39

Sound Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Changing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Virtual Surround Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Enjoying Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Displaying the Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Adjusting the Playback Picture (PICTURE MODE) . . . . . . . . . . . . . . . . . . . . 44

Changing the Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Download from Www.Somanuals.com. All Manuals Search And Download.

Locking Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Limiting Playback by Children (PARENTAL CONTROL). . . . . . . . . . . . . . . . 46

Settings and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Using the Setup Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Setting the Display or Sound Track Language (LANGUAGE SETUP) . . . . . 50

Settings for the Display (SCREEN SETUP). . . . . . . . . . . . . . . . . . . . . . . . . . 51

Custom Settings (CUSTOM SETUP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Settings for the Sound (AUDIO SETUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Self-diagnosis Function (When letters/numbers appear in the display). . . . . 57

Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Download from Www.Somanuals.com. All Manuals Search And Download.

About This Manual

This Player Can Play the

Following Discs

• Instructions in this manual describe the

controls on the remote. You can also use the

controls on the player if they have the same

or similar names as those on the remote.

• The meaning of the icons used in this

manual is described below:

Format of discs

DVD VIDEO

VIDEO CD

Music CD

Icon

Meaning

Functions available for DVD

VIDEOs and DVD-RWs/

DVD-Rs in video mode or

DVD+RWs/DVD+Rs

Functions available for VIDEO

CDs, Super VCDs, or CD-Rs/

CD-RWs in video CD format

or Super VCD format

The “DVD VIDEO” is a trademark.

Region code

Functions available for music

CDs or CD-Rs/CD-RWs in

music CD format

Your player has a region code printed on the

back of the unit and only will play DVD

VIDEO discs (playback only) labeled with

identical region codes. This system is used to

protect copyrights.

Functions available for DATA

CDs (CD-ROMs/CD-Rs/CD-

RWs containing MP3* audio

tracks)

ALL

* MP3 (MPEG 1 Audio Layer 3) is a standard

format defined by ISO/MPEG which compresses

audio data.

DVDs labeled

player.

will also play on this

If you try to play any other DVD, the message

“Playback prohibited by area limitations.”

will appear on the TV screen. Depending on

the DVD, no region code indication may be

labeled even though playing the DVD is

prohibited by area restrictions.

MODEL NO.

Region code

AC 00V 00Hz

NO.

0-000-000-00

Download from Www.Somanuals.com. All Manuals Search And Download.

• Music discs encoded with copyright protection

technologies

Example of discs that the player

cannot play

The player cannot play the following discs:

• All CD-ROMs (including PHOTO CDs)/

CD-Rs/CD-RWs other than those recorded

in the following formats:

This product is designed to playback discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

by some record companies. Please be aware that

among those discs, there are some that do not

conform to the CD standard and may not be

playable by this product.

– music CD format

– video CD format

– MP3 format that conforms to ISO9660*

Level 1/Level 2, or its extended format,

Joliet

Note on playback operations of

DVDs and VIDEO CDs

• Data part of CD-Extras

Some playback operations of DVDs and

VIDEO CDs may be intentionally set by

software producers. Since this player plays

DVDs and VIDEO CDs according to the disc

contents the software producers designed,

some playback features may not be available.

Also, refer to the instructions supplied with

the DVDs or VIDEO CDs.

• DVD-RWs in VR mode

• DVD-ROMs

• DVD Audio discs

• HD layer on Super Audio CDs

• Super VCDs in PAL format

* A logical format of files and folders on CD-

ROMs, defined by ISO (International Standard

Organization).

Also, the player cannot play the following

discs:

Copyrights

• A DVD with a different region code.

• A disc recorded in a color system other than

NTSC, such as PAL or SECAM (this player

conforms to the NTSC color system).

• A disc that has a non-standard shape (e.g.,

card, heart).

• A disc with paper or stickers on it.

• A disc that has the adhesive of cellophane

tape or a sticker still left on it.

This product incorporates copyright

protection technology that is protected by

method claims of certain U.S. patents, other

intellectual property rights owned by

Macrovision Corporation, and other rights

owners. Use of this copyright protection

technology must be authorized by

Macrovision Corporation, and is intended for

home and other limited viewing uses only

unless otherwise authorized by Macrovision

Corporation. Reverse engineering or

disassembly is prohibited.

Notes

• Notes about DVD-RWs/DVD-Rs, DVD+RWs/

DVD+Rs or CD-Rs/CD-RWs

Some DVD-RWs/DVD-Rs, DVD+RWs/

DVD+Rs, or CD-Rs/CD-RWs cannot be played

on this player due to the recording quality or

physical condition of the disc, or the

characteristics of the recording device and

authoring software.

The disc will not play if it has not been correctly

finalized. For more information, see the operating

instructions for the recording device. Note that

discs created in the Packet Write format cannot be

played.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes about the Discs

• To keep the disc clean, handle the disc by its

edge. Do not touch the surface.

• Do not expose the disc to direct sunlight or

heat sources such as hot air ducts, or leave it

in a car parked in direct sunlight as the

temperature may rise considerably inside

the car.

• After playing, store the disc in its case.

• Clean the disc with a cleaning cloth.

Wipe the disc from the center out.

• Do not use solvents such as benzine,

thinner, commercially available cleaners, or

anti-static spray intended for vinyl LPs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index to Parts and Controls

For more information, refer to the pages indicated in parentheses.

Front panel

A [/1 (on/standy) button (25)

B Disc tray (25)

F x (stop) button (26)

G X (pause) button (26)

C Front panel display (10)

H H (play) button (25)

(remote sensor) (15)

I > (next) button (26, 36)

J . (previous) button (26, 36)

E A (open/close) button (25)

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Front panel display

When playing back a DVD

Lights up when you can change the angle (45)

Playing status

Disc type

Current title/chapter or playing

time (40)

Lights up during

Repeat Play (34)

Current audio signal (41)

When playing back a VIDEO CD with Playback Control (PBC) (29)

Disc type

Playing status

Lights up during A-B Repeat Play

(34)

Current scene or playing time (40)

When playing back a CD, DATA CD (MP3 audio), or VIDEO CD (without PBC)

Lights up during

Repeat Play (35)

Playing status

Current track (40)

Playing time (40)

Lights up when playing MP3

audio tracks (30)

Disc type

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear panel

DIGITAL OUT

LINE OUT

VIDEO

OUT

COMPONENT VIDEO OUT

PCM/DTS/

DOLBY DIGITAL

COAXIAL

R-AUDIO-L

VIDEO

A DIGITAL OUT (COAXIAL) jack (20,

21, 22)

B LINE OUT L/R (AUDIO) jacks (19,

20, 21)

D S VIDEO OUT jack (16)

E COMPONENT VIDEO OUT jacks

(16)

C LINE OUT (VIDEO) jack (16)

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote

A Z OPEN/CLOSE button (26)

B Number buttons (28)

The number 5 button has a tactile dot.*

C CLEAR button (32)

D SUBTITLE button (44)

E AUDIO button (41)

F ./> PREV/NEXT (previous/

next) buttons (26)

m/M

SCAN/SLOW

buttons (36)

H X PAUSE button (26)

I H PLAY button (25)

The H button has a tactile dot.*

J C/X/x/c buttons (28)

K DISPLAY button (13)

L TOP MENU button (28)

M [/1 (on/standby) button (25)

N TIME/TEXT button (39)

O PICTURE MODE button (44)

P ANGLE button (45)

Q SUR (surround) button (42)

R SEARCH MODE button (37)

S REPEAT button (34)

INSTANT SEARCH/STEP

button (26, 37)

INSTANT REPLAY/STEP

button (26, 37)

V x STOP button (26)

W ENTER button (23)

X O RETURN button (29)

Y MENU button (28, 30)

* Use the tactile dot as a reference when operating

the player.

Download from Www.Somanuals.com. All Manuals Search And Download.

◆Display 2

The following playback information is

displayed.

Example: When playing a DVD

Guide to On-Screen

Displays (Control Bar)

The following explains the Control Bar. The

Control Bar is used for making adjustments to

the settings or displaying information during

playback.

–

DVD T41

T 1:01:57

The displayed contents differ according to the

type of disc being played. The numbers in

parentheses indicate reference pages.

G TIME/TEXT icon

H Title number of the DVD (37)

I Chapter number of the DVD (37)

J Playing time or remaining time (39)

Displaying the Control Bar during

playback

The following displays appear when the

DISPLAY button is pressed repeatedly

during playback. You can select the setting

that suits the current playback item and view

the related information.

◆Display 3 (DVD playback only)

3 / 2 .1

DOLBY DIGITAL

◆Display 1

The following play modes 1~4 can be set.

A check mark is indicated when activated.

Example: When Repeat Play is selected. (The

display will differ when A-B Repeat Play is

set.)

K Format of the current audio signal (41)

◆No display

CHAPTER

◆Return to Display 1

A Repeat Play (34)

B Shuffle Play (33)

C Program Play (32)

D A-B Repeat Play (35)

E Unit being repeated in this example

F Playback status (N Playback,

X Pause, x Stop, etc.)

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

◆No display

Displaying the Control Bar in

stop mode

The following displays appear when the

DISPLAY button is repeatedly pressed

during stop mode. You can make basic

adjustments and customize the player to suit

your viewing preferences.

◆Return to Display 1

◆Display 1

The following settings can be made.

QUICK

SETUP (49)

• Select QUICK to make the minimum

number of basic adjustments for using the

player.

• Select CUSTOM to make a full range of

adjustments.

• Select RESET to return the SETUP

adjustments to the default settings.

PARENTAL CONTROL (46)

• Set this to limit the playback of selected

discs on this player.

◆Display 2

Shows the same information as Display 1

during playback.

CHAPTER

◆Display 3

Shows the same information as Display 2

during playback.

–

DVD T41

T 1:01:57

Download from Www.Somanuals.com. All Manuals Search And Download.

Hookups

Hooking Up the Player

Follow Steps 1 to 6 to hook up and adjust the settings of the player.

Notes

• Plug cords securely to prevent unwanted noise.

• Refer to the instructions supplied with the components to be connected.

• You cannot connect this player to a TV that does not have a video input jack.

• Be sure to disconnect the power of each component before connecting.

Step 1: Unpacking

Check that you have the following items:

• Audio/video cord (pinplug × 3 y pinplug × 3) (1)

• Remote commander (remote) (1)

• Size AA (R6) batteries (2)

• A plug adaptor is included with some models.

Step 2: Inserting Batteries into the Remote

You can control the player using the supplied remote. Insert two Size AA (R6) batteries by

matching the 3 and # ends on the batteries to the markings inside the compartment. When

using the remote, point it at the remote sensor

on the player.

Notes

• Do not leave the remote in an extremely hot or humid place.

• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a

malfunction.

• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage

from battery leakage and corrosion.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.

Select one of the patterns A through C, according to the input jack on your TV monitor,

projector, or AV amplifier (receiver).

INPUT

VIDEO

COMPONENT

VIDEO IN

Component

video cord

(not supplied)

(yellow)

Audio/video cord

(supplied)

(green)

(blue)

(red)

AUDIO

TV, projector, or AV

amplifier (receiver)

TV, projector, or AV

amplifier (receiver)

(red)

(yellow)

to LINE OUT (VIDEO)

to COMPONENT

VIDEO OUT

(green)

(blue)

DIGITAL OUT

LINE OUT

VIDEO

OUT

COMPONENT VIDEO OUT

PCM/DTS/

DOLBY DIGITAL

COAXIAL

R-AUDIO-L

VIDEO

CD/DVD player

to S VIDEO OUT

INPUT

S VIDEO

TV, projector, or AV

amplifier (receiver)

S VIDEO cord (not supplied)

l : Signal flow

A If you are connecting to a video input jack

Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will

enjoy standard quality images.

Yellow (Video)

White (L)

Yellow (Video)

White (L)

Red (R)

Use the red and white plugs to connect to the audio input jacks (page 19). (Do this if you are

connecting to a TV only.)

Download from Www.Somanuals.com. All Manuals Search And Download.

B If you are connecting to an S VIDEO input jack

Connect the S VIDEO cord (not supplied). You will enjoy high quality images.

C If you are connecting to a monitor, projector, or AV amplifier (receiver)

having component video input jacks (Y, P^B, PR)

Connect the component via the COMPONENT VIDEO OUT jacks using a component video

cord (not supplied) or three video cords (not supplied) of the same kind and length. You will

enjoy accurate color reproduction and high quality images.

Green

Blue

Green

Blue

Red

When connecting to a wide screen TV

Depending on the disc, the image may not fit your TV screen. If you want to change the aspect

ratio, please refer to page 51.

Note

Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a clear

image on the TV screen.

VCR

CD/DVD player

Connect

directly

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read

the instructions for the components you wish to connect.

Select a connection

Select one of the following connections,

through

Components to be connected

Connection

(page 19)

Your setup (example)

• Surround effects: Virtual Surround WIDE (page

42)

Stereo amplifier (receiver) and two speakers

MD deck/DAT deck

(page 20)

(page 21)

(page 22)

AV amplifier (receiver) having a Dolby*

Surround (Pro Logic) decoder and 3 to 6

speakers

• Surround effects: Dolby Surround (Pro Logic)

(page 58)

AV amplifier (receiver) with digital input jacks

having a Dolby Digital or DTS** decoder and 6

speakers

• Surround effects:

– Dolby Digital (5.1ch) (page 58)

– DTS (5.1ch) (page 58)

Manufactured under license from Dolby

Laboratories. “Dolby,” “Pro Logic,” and the

double-D symbol are trademarks of Dolby

Laboratories.

** “DTS” and “DTS Digital Out” are trademarks

of Digital Theater Systems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to your TV

This connection will use your TV speakers for sound.

CD/DVD player

DIGITAL OUT

LINE OUT

VIDEO

OUT

COMPONENT VIDEO OUT

PCM/DTS/

DOLBY DIGITAL

COAXIAL

R-AUDIO-L

VIDEO

LINE OUT

(yellow)*

(white)

(red)

R-AUDIO-L

VIDEO

(red)

Audio/video

cord (supplied)

to LINE OUT L/R

(AUDIO)

to audio input

l : Signal flow

* The yellow plug is used for video signals (page

16).

z Hint

When connecting to a monaural TV, use a stereo-

mono conversion cord (not supplied). Connect the

LINE OUT L/R (AUDIO) jacks to the TV’s audio

input jack.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to

an MD deck or DAT deck

B-1

If the stereo amplifier (receiver) has audio input jacks L and R only, use

. If the amplifier

B-2

(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use

In this case, you can also connect the player directly to the MD deck or DAT deck without using

your stereo amplifier (receiver).

CD/DVD player

DIGITAL OUT

LINE OUT

VIDEO

OUT

COMPONENT VIDEO OUT

PCM/DTS/

DOLBY DIGITAL

COAXIAL

R-AUDIO-L

VIDEO

B-2

B-1

Coaxial digital

cord (not supplied)

Stereo audio cord

(not supplied)

DIGITAL OUT

LINE OUT

(white)

(red)

PCM/DTS/

DOLBY DIGITAL

COAXIAL

R-AUDIO-L

VIDEO

to DIGITAL OUT

(COAXIAL)

to LINE OUT L/R (AUDIO)

(white)

(red)

to coaxial digital input

to audio input

[Speakers]

Front (L)

Stereo amplifier (receiver)

MD deck/DAT deck

Front (R)

l: Signal flow

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro

Logic) decoder and 3 to 6 speakers

You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-

channel audio (Dolby Digital) discs.

C-1

If your amplifier (receiver) has L and R audio input jacks only, use

. If your amplifier

(receiver) has a digital input jack, use

C-2

CD/DVD player

DIGITAL OUT

LINE OUT

VIDEO

OUT

COMPONENT VIDEO OUT

PCM/DTS/

DOLBY DIGITAL

COAXIAL

R-AUDIO-L

VIDEO

C-2

C-1

Stereo

audio cord (not

supplied)

Coaxial digital cord

(not supplied)

DIGITAL OUT

LINE OUT

(white)

(red)

PCM/DTS/

DOLBY DIGITAL

COAXIAL

R-AUDIO-L

VIDEO

to DIGITAL OUT

(COAXIAL)

to LINE OUT L/R (AUDIO)

(white)

(red)

to coaxial digital input

to audio input

[Speakers]

Front (L)

Amplifier (receiver) with Dolby

Surround decoder

Front (R)

Rear (L)

Rear (R)

Subwoofer

Center

Rear (mono)

l: Signal flow

Note

When connecting 6 speakers, replace the monaural

rear speaker with a center speaker, 2 rear speakers

and a subwoofer.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to an AV amplifier (receiver) with a digital input jack having

a Dolby Digital or DTS decoder and 6 speakers

This connection will allow you to use the Dolby Digital or DTS decoder function of your AV

amplifier (receiver).

CD/DVD player

DIGITAL OUT

LINE OUT

VIDEO

OUT

COMPONENT VIDEO OUT

PCM/DTS/

DOLBY DIGITAL

COAXIAL

R-AUDIO-L

VIDEO

DIGITAL OUT

PCM/DTS/

DOLBY DIGITAL

COAXIAL

to DIGITAL OUT

(COAXIAL)

Coaxial digital cord

(not supplied)

to coaxial digital input

[Speakers]

AV amplifier (receiver) having

a decoder

Rear (L)

Center

Subwoofer

Front (L)

Rear (R)

l: Signal flow

Front (R)

Note

After you have completed the connection, be sure to

set “DOLBY DIGITAL” to “DOLBY DIGITAL”

and “DTS” to “ON” (page 23) in Quick Setup.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 5: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet.

Step 6: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.

To skip an adjustment, press >. To return to the previous adjustment, press ..

LANGUAGE SETUP

OSD:

ENGLISH

MENU:

AUDIO:

SUBTITLE:

FRENCH

SPANISH

PORTUGUESE

Press X/x to select a language.

The player uses the language selected

here to display the menu and subtitles as

well.

ENTER

Press ENTER.

The Setup Display for selecting the

aspect ratio of the TV to be connected

appears.

Turn on the TV.

SCREEN SETUP

Press [/1.

4:3 LETTER BOX

4:3 PAN SCAN

16:9

TV TYPE:

SCREEN SAVER:

BACKGROUND:

BLACK LEVEL:

Switch the input selector on your

TV so that the signal from the

player appears on the TV screen.

BLACK LEVEL ^{(COMPONENT OUT)}:

“Press [ENTER] to run QUICK SETUP”

appears at the bottom of the screen. If this

message does not appear, select

“QUICK” under “SETUP” in the Control

Bar to run Quick Setup (page 50).

Press X/xto select the setting that

matches your TV type.

◆ If you have a 4:3 standard TV

• 4:3 LETTER BOX or 4:3 PAN SCAN

(page 51)

Press ENTER without inserting a

disc.

The Setup Display for selecting the

language used in the on-screen display

appears.

◆ If you have a wide-screen TV or a 4:3

standard TV with a wide-screen mode

• 16:9 (page 51)

Press ENTER.

The Setup Display for selecting the type

of jack used to connect your amplifier

(receiver) appears.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

“DTS” is selected.

Is this player connected to an amplifier

(receiver) ? Select the type of jack you

are using.

AUDIO SETUP

AUDIO ATT:

AUDIO DRC:

DOWNMIX:

DIGITAL OUT:

DOLBY DIGITAL:

DTS:

OFF

STANDARD

DOLBY SURROUND

YES

LINE OUTPUT L/R (AUDIO)

D-PCM

OFF

DIGITAL OUTPUT

OFF

Press X/xto select the type of jack

(if any) you are using to connect to

an amplifier (receiver), then press

ENTER.

12Press X/x to select whether or

not you wish to send a DTS signal

to your amplifier (receiver).

Choose the item that matches the audio

connection you selected on pages 19 to

Choose the item that matches the audio

connection you selected on pages 20 to

22 (

through

22 (

through

• If you connect just a TV and nothing

else, select “NO.” Quick Setup is

B-2

C-2

• OFF (page 54)

finished and connections are complete.

B-1

C-1

• ON (only if the amplifier (receiver) has

a DTS decoder) (page 54)

• Select “LINE OUTPUT L/R

(AUDIO).” Quick Setup is finished and

connections are complete.

13Press ENTER.

B-2

C-2

Quick Setup is finished. All connections

and setup operations are complete.

• Select “DIGITAL OUTPUT.” The Setup

Display for “DOLBY DIGITAL” appears.

Enjoying the surround sound

effects

To enjoy the surround sound effects of this

player or your amplifier (receiver), set the

following items as described below for the

audio connection you selected on pages 20 to

10Press X/x to select the type of

Dolby Digital signal you wish to

send to your amplifier (receiver).

Choose the signal that matches the audio

connection you selected on pages 20 to

22 (

through

22 (

through

). Each of these is the

default setting and does not need to be

adjusted when you first connect the player.

Refer to page 49 for using the Setup Display.

AUDIO SETUP

AUDIO ATT:

AUDIO DRC:

DOWNMIX:

DIGITAL OUT:

DOLBY DIGITAL:

DTS:

OFF

STANDARD

DOLBY SURROUND

D-PCM

Audio Connection (pages 19 to 22)

D-PCM

DOLBY DIGITAL

• No additional settings are needed.

C-1

B-1

B-2

C-2

• Set “DOWNMIX” to “DOLBY

SURROUND” (page 54)

• D-PCM (page 54)

• If the sound distorts even when the volume

is turned down, set “AUDIO ATT” to “ON”

(page 53)

• DOLBY DIGITAL (only if the

amplifier (receiver) has a Dolby Digital

decoder) (page 54)

B-2

C-2

• Set “DOWNMIX” to “DOLBY

SURROUND” (page 54)

• Set “DIGITAL OUT” to “ON” (page 54)

11Press ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Press Aon the player, and place a

disc on the disc tray.

Playing Discs

Depending on the DVD or VIDEO CD, some

operations may be different or restricted.

Refer to the operating instructions supplied

with your disc.

With the playback side facing down

Press H.

The disc tray closes, and the player starts

playback (continuous play). Adjust the

volume on the TV or the amplifier

(receiver).

Depending on the disc, a menu may

appear on the TV screen. For DVDs, see

page 28. For VIDEO CDs, see page 29.

To turn off the player

Press [/1. The player enters standby mode.

AUDIO

z Hint

You can have the player turn off automatically

whenever you leave it in stop mode for more than

30 minutes. To turn on this function, set “AUTO

POWER OFF” in “CUSTOM SETUP” to “ON”

(page 52).

Notes on playing DTS sound tracks on a CD

• When playing DTS-encoded CDs,

excessive noise will be heard from the

analog stereo jacks. To avoid possible

damage to the audio system, the consumer

should take proper precautions when the

analog stereo jacks of the player are

connected to an amplification system. To

enjoy DTS Digital Surround™ playback, an

external 5.1-channel decoder system must

be connected to the digital jack of the

player.

Turn on your TV.

Press [/1.

The player turns on.

Switch the input selector on your

TV so that the signal from the

player appears on the TV screen.

• Set the sound to “STEREO” using the

AUDIO button when you play DTS sound

tracks on a CD (page 41).

◆ When using an amplifier (receiver)

Turn on the amplifier (receiver) and

select the appropriate channel so that you

can hear sound from the player.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

• Do not play DTS sound tracks without first

connecting the player to an audio

Operation

Stop play and remove Press Z

the disc

component having a built-in DTS decoder.

The player outputs the DTS signal via the

DIGITAL OUT (COAXIAL) jack even if

“DTS” in “AUDIO SETUP” is set to “OFF”

in the Setup Display (page 54), and may

affect your ears or cause your speakers to be

damaged.

Replay the previous

scene*

Press

INSTANT REPLAY

during playback

Briefly fast forward

the current scene**

Press

INSTANT SEARCH

during playback

Notes on playing DVDs with a DTS sound

track

• DTS audio signals are output only through

the DIGITAL OUT (COAXIAL) jack.

• When you play a DVD with DTS sound

tracks, set “DTS” to “ON” in “AUDIO

SETUP” (page 54).

• If you connect the player to audio

equipment without a DTS decoder, do not

set “DTS” to “ON” in “AUDIO SETUP”

(page 54). A loud noise may come out from

the speakers, affecting your ears or causing

the speakers to be damaged.

For DVD VIDEOs and DVD-RWs/DVD-Rs

only

** For DVD VIDEOs and DVD-RWs/DVD-Rs or

DVD+RWs only

zHints

• The Instant Replay function is useful when you

want to review a scene or dialog that you missed.

• The Instant Search function is useful when you

want to pass over a scene that you don’t want to

watch.

Note

You may not be able to use the Instant Replay or

Instant Search function with some scenes.

Additional operations

Locking the disc tray (Child

Lock)

You can lock the disc tray to prevent children

from opening it.

INSTANT REPLAY

INSTANT SEARCH

Operation

Press x

Stop

Pause

ENTER

Press X

RETURN

Resume play after

pause

Press X or H

When the player is in standby mode, press

O RETURN, ENTER, and [/1in this order

on the remote.

The player turns on and “LOCKED” appears

on the front panel display.

Go to the next chapter, Press >

track, or scene in

continuous play mode

Go back to the

Press .

The Zbutton on the player or the remote does

not work while the Child Lock is set.

previous chapter,

track, or scene in

continuous play mode

Download from Www.Somanuals.com. All Manuals Search And Download.

To unlock the disc tray

When the player is in standby mode, press

O RETURN, ENTER, and then [/1 again.

Resuming Playback from

the Point Where You

Stopped the Disc (Disc

Resume)

Note

Even if you select “RESET” under “SETUP” in the

Control Bar (page 50), the disc tray remains locked.

The player stores the point where you stopped

the disc for up to 6 discs and resumes

playback the next time you insert the same

disc. When you store a resume playback point

for the seventh disc, the resume playback

point for the first disc is deleted.

1 While playing a disc, press x to stop

playback.

“RESUME” appears on the front panel

display.

2 Press H.

The player starts playback from the point

where you stopped the disc in Step 1.

z Hints

• To play from the beginning of the disc, press x

twice, then press H.

• For CDs, and DATA CDs, the player remembers

the resume playback point for the current disc

unless the disc tray is opened, the power cord is

disconnected, or only for DATA CDs, the player

enters standby mode.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Using the DVD’s Menu

• “DISC RESUME” in “CUSTOM SETUP” must

be set to “ON” (default) for this function to work

(page 53).

• The resume playback point for the current disc is

cleared when:

A DVD is divided into long sections of a

picture or a music feature called “titles.”

When you play a DVD which contains

several titles, you can select the title you want

using the TOP MENU button.

When you play DVDs that allow you to select

items such as the language for the subtitles

and the language for the sound, select these

items using the MENU button.

– you change the play mode.

– you change the settings on the Setup Display.

• This function may not work with some discs.

• Resume Play does not work during Shuffle Play

and Program Play.

• If “DISC RESUME” in “CUSTOM SETUP” is

set to “ON” and you play a recorded disc such as

DVD-RW, the player may play other recorded

discs from the same resume point. To play from

the beginning, press x twice and then press H.

Number

buttons

ENTER

TOP MENU

Press TOP MENU or MENU.

The disc’s menu appears on the TV

screen.

The contents of the menu vary from disc

to disc.

Press C/X/x/c or the number

buttons to select the item you want

to play or change.

If you press the number buttons, the

following display appears.

Press the number buttons to select the

item you want.

Press ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

z Hint

To play without using PBC, press ./> or the

number buttons while the player is stopped to select

a track, then press H or ENTER.

“Play without PBC” appears on the TV screen and

the player starts continuous play. You cannot play

still pictures such as a menu.

Playing VIDEO CDs with

PBCFunctions(PBCPlayback)

To return to PBC playback, press x twice then

press H.

PBC (Playback Control) allows you to play

VIDEO CDs interactively by following the

menu on the TV screen.

Notes

• Depending on the VIDEO CD, “Press ENTER” in

step 3 may appear as “Press SELECT” in the

instructions supplied with the disc. In this case,

press H.

• The PBC functions of Super VCDs do not work

with this player. Super VCDs are played in

continuous play mode only.

Number

buttons

ENTER

RETURN

Start playing a VIDEO CD with PBC

functions.

The menu for your selection appears.

Select the item number you want

by pressing X/x or the number

buttons.

Press ENTER.

Follow the instructions in the

menu for interactive operations.

Refer to the instructions supplied with the

disc, as the operating procedure may

differ depending on the VIDEO CD.

To return to the menu

Press O RETURN.

Download from Www.Somanuals.com. All Manuals Search And Download.

(

)

3 0

Playing an MP3 Audio

Track

R O C K B E S T H I T

K A R A O K E

J A Z Z

R & B

M Y F A V O R I T E S O N G S

C L A S S I C A L

S A L S A O F C U B A

B O S S A N O V A

You can play back DATA CDs (CD-ROMs/

CD-Rs/CD-RWs) recorded in MP3 (MPEG1

Audio Layer 3) format.

2 Select an album using X/x and press

ENTER.

The list of tracks contained in the album

appears.

J A Z Z

(

)

9 0

0 1 S H E I S S P E C I A L

0 2 A L L Y O U N E E D I S . . .

0 3 S P I C Y L I F E

ENTER

0 4 H A P P Y H O U R

0 5 R I V E R S I D E

0 6

0 7 T A K E T I M E , T A K E T I M E

RETURN

3 Select a track using X/x and press

ENTER.

The selected track starts playing.

When a track or album is being played, its

title is shaded.

Press Z and place a DATA CD on

the disc tray.

To go to the next or previous page

Press c or C.

Press H.

The disc tray closes, and the player starts

to play the first MP3 audio track in the

first album on the disc.

To return to the previous display

Press O RETURN.

To turn off the display

Press MENU.

Notes

• This player can play MP3 audio tracks recorded in

the following sampling frequencies: 32 kHz, 44.1

kHz, 48 kHz.

• The playback order may be different from the

edited order. See “The Playback order of MP3

audio tracks” on the next page for details.

Notes

• Only the letters in the alphabet and numbers can

be used for album or track names. Anything else

is displayed as an “ * ”.

• ID3 tags cannot be displayed.

Selecting an album and track

About MP3 audio tracks

1 Press MENU.

You can play MP3 audio tracks on CD-ROMs

or CD-Rs/CD-RWs. However, the discs must

be recorded according to ISO9660 level 1,

level 2, or Joliet format for the player to

recognize the tracks.

The list of MP3 albums recorded on the

DATA CD appears.

You can also play discs recorded in Multi

Session.

Download from Www.Somanuals.com. All Manuals Search And Download.

See the instructions of the CD-R/CD-RW

device or recording software (not supplied)

for details on the recording format.

When you insert a DATA CD and press H,

the numbered tracks are played sequentially,

from 1 through 7. Any sub-albums/tracks

contained within a currently selected album

take priority over the next album in the same

tree. (Example: C contains D so 4 is played

before 5.)

When you press MENU and the list of MP3

albums appears (page 30), the albums are

arranged in the following order: A t B t

C t D t F t G. Albums that do not

contain tracks (such as album E) do not

appear in the list.

To play a Multi Session CD

This player can play Multi Session CDs when

an MP3 audio track is located in the first

session. Any subsequent MP3 audio tracks,

recorded in the later sessions, can also be

played back.

When audio tracks and images in music CD

format or video CD format are recorded in the

first session, only the first session will be

played back.

z Hints

• If you add numbers (01, 02, 03, etc.) to the front

of the track file names, the tracks will be played in

that order.

• Since a disc with many trees takes longer to start

playback, it is recommended that you create

albums of no more than two trees.

Notes

• If you put the extension “.MP3” to data not in

MP3 format, the player cannot recognize the data

properly and will generate a loud noise which

could damage your speaker system.

• The player cannot play audio tracks in MP3PRO

format.

Notes

• Depending on the software you use to create the

DATA CD, the playback order may differ from

the illustration above.

• The playback order above may not be applicable

if there are more than a total of 200 albums and

tracks in the DATA CD.

• The player can recognize up to 100 albums (the

player will count just albums, including albums

that do not contain MP3 audio tracks). The player

will not play any albums beyond the first 100

albums. Of the first 100 albums, the player will

play no more than a combined total of 200 albums

and tracks.

The Playback order of MP3 audio tracks

The playback order of albums and tracks

recorded on a DATA CD is as follows.

◆Structure of disc contents

Tree 1 Tree 2 Tree 3 Tree 4 Tree 5

ROOT

album

track

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Press DISPLAY twice while the player

is in stop mode.

Various Play Mode

Functions (Program Play,

Shuffle Play, Repeat Play, A-B Repeat

Play)

The following Control Bar appears.

You can set the following play modes:

• Program Play (page 32)

• Shuffle Play (page 33)

• Repeat Play (page 34)

• A-B Repeat Play (page 35)

2 Press C/c to select

(PROGRAM), then press ENTER.

“TRACK” is displayed when you play

a VIDEO CD or CD.

PROGRAM

ALL CLEAR

Note

– –

1. TITLE

2. TITLE

3. TITLE

4. TITLE

– –

The play mode is canceled when:

– you open the disc tray.

– the player enters standby mode by pressing [/1.

5. TITLE

6. TITLE

7. TITLE

Creating your own program

(Program Play)

Titles or tracks

recorded on a disc

You can play the contents of a disc in the

order you want by arranging the order of the

titles, chapters, or tracks on the disc to create

your own program. You can program up to 99

titles, chapters, and tracks.

3 Press c.

The cursor moves to the title or track row

“T” (in this case, “01”).

PROGRAM

ALL CLEAR

1. TITLE

– –

ALL

– –

2. TITLE

3. TITLE

4. TITLE

5. TITLE

6. TITLE

7. TITLE

Number

buttons

CLEAR

Chapters recorded on a disc

4 Select the title, chapter, or track you

want to program.

ENTER

◆ When playing a DVD

For example, select chapter “03” of title

“02.”

DISPLAY

Press X/x or the number buttons to select

“02” under “T,” then press ENTER.

PROGRAM

ALL CLEAR

– –

ALL

1. TITLE

2. TITLE

3. TITLE

4. TITLE

5. TITLE

6. TITLE

7. TITLE

– –

Download from Www.Somanuals.com. All Manuals Search And Download.

Next, press X/x or the number buttons to

select “03” under “C,” then press

ENTER.

Follow Step 4 for new programming. To

cancel a program, select “--” under “T,”

then press ENTER.

PROGRAM

To cancel all the titles, chapters, or tracks

in the programmed order

ALL CLEAR

1. TITLE 0 2 0 3

–

– –

2. TITLE

3. TITLE

4. TITLE

5. TITLE

6. TITLE

7. TITLE

Follow Steps 1 and 2 of “Creating your

own program (Program Play).”

Press X and select “ALL CLEAR.”

Press ENTER.

Selected title and chapter

z Hint

You can do Repeat Play or Shuffle Play of the

programmed titles, chapters, or tracks. During

Program Play, follow the steps of “Repeat Play”

(page 34) or “Shuffle Play” (page 33).

◆ When playing a VIDEO CD or CD

For example, select track “02.”

Press X/x or the number buttons to select

“02” under “T,” then press ENTER.

Selected track

Notes

0:15:30

PROGRAM

• When playing Super VCDs, the total time of the

programmed tracks does not appear on the screen.

• You cannot use this function with VIDEO CDs

with PBC playback.

ALL CLEAR

1. TRACK

2. TRACK

3. TRACK

4. TRACK

5. TRACK

6. TRACK

7. TRACK

– –

0 2

– –

Playing in random order (Shuffle

Play)

Total time of the programmed tracks

You can have the player “shuffle” titles,

chapters, or tracks. Subsequent “shuffling”

may produce a different playing order.

5 To program other titles, chapters, or

tracks, repeat Steps 3 to 4.

The programmed titles, chapters, and

tracks are displayed in the selected order.

6 Press H to start Program Play.

Program Play begins.

When the program ends, you can restart

the same program again by pressing H.

CLEAR

To stop Program Play

Press CLEAR.

ENTER

To turn off the display

DISPLAY

Press DISPLAY repeatedly until the display

is turned off.

1 Press DISPLAY during playback.

To change or cancel a program

The following Control Bar appears.

Follow Steps 1 and 2 of “Creating your

own program (Program Play).”

Select the program number of the title,

chapter, or track you want to change or

cancel using X/x or the number buttons,

and press c.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Press C/c to select

(SHUFFLE),

then press ENTER repeatedly to select

the item to be shuffled.

Playing repeatedly (Repeat Play)

You can play all of the titles or tracks on a

disc or a single title, chapter, or track

repeatedly.

TITLE

You can use a combination of Shuffle or

Program Play modes.

◆ When playing a DVD

• TITLE

• CHAPTER

◆ When playing a VIDEO CD or CD

• TRACK

CLEAR

◆ When Program Play is activated

• ON: shuffles titles, chapters, or tracks

selected in Program Play.

REPEAT

To return to normal play

Press CLEAR, or select “OFF” in Step 2.

To turn off the Control Bar

Press DISPLAY repeatedly until the Control

Bar is turned off.

1 Press REPEAT during playback.

The following display appears.

z Hints

• You can set Shuffle Play while the player is

stopped. After selecting the “SHUFFLE” option,

press H. Shuffle Play starts.

DISC

• Up to 200 chapters in a disc can be played in

random order when “CHAPTER” is selected.

2 Press REPEAT repeatedly to select the

item to be repeated.

Note

You cannot use this function with VIDEO CDs with

PBC playback.

◆ When playing a DVD

• DISC: repeats all of the titles.

• TITLE: repeats the current title on a

disc.

• CHAPTER: repeats the current

chapter.

◆ When playing a VIDEO CD or CD

• DISC: repeats all of the tracks.

• TRACK: repeats the current track.

◆ When playing a DATA CD (MP3 audio)

• DISC: repeats all of the albums.

• ALBUM: repeats the current album.

• TRACK: repeats the current track.

◆ When Program Play or Shuffle Play is

activated

• ON: repeats Program Play or Shuffle

Play.

Download from Www.Somanuals.com. All Manuals Search And Download.

To return to normal play

3 During playback, when you find the

starting point (point A) of the portion to

be played repeatedly, press ENTER.

The starting point (point A) is set.

Press CLEAR, or select “OFF” in Step 2.

z Hints

• You can set Repeat Play while the player is

stopped. After selecting the “REPEAT” option,

press H. Repeat Play starts.

–

A13

0:27:34 B

• You can also select “REPEAT” from the Control

Bar (page 13).

Note

4 When you reach the ending point

(point B), press ENTER again.

The set points are displayed and the

player starts repeating this specific

portion.

You cannot use this function with VIDEO CDs with

PBC playback.

Repeating a specific portion (A-

B Repeat Play)

You can play a specific portion of a title,

chapter or track repeatedly. (This function is

useful when you want to memorize lyrics,

etc.)

To return to normal play

Press CLEAR.

To turn off the Control Bar

Press DISPLAY repeatedly until the Control

Bar is turned off.

Note

When you set A-B Repeat Play, the settings for

Shuffle Play, Repeat Play, and Program Play are

canceled.

CLEAR

ENTER

DISPLAY

1 Press DISPLAY during playback.

The following Control Bar appears.

2 Press C/c to select

(A-B

REPEAT).

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback direction

×2B t 1M t 2M t 3M

Searching for a Scene

3M (DVD/VIDEO CD only)

×2B (DVD/CD only)

Searching for a

Particular Point on a

Disc (Scan, Slow-motion Play,

Search, Freeze Frame)

Opposite direction

×2b t 1m t 2m t 3m

3m (DVD/VIDEO CD only)

×2b (DVD only)

You can quickly locate a particular point on a

disc by monitoring the picture or playing back

slowly.

The “×2B”/“×2b” playback speed is about

twice the normal speed.

The “3M”/“3m” playback speed is faster

than “2M”/“2m” and the “2M”/“2m”

playback speed is faster than “1M”/

“1m.”

Watching frame by frame (Slow-

motion play)

STEP

Press

m or M

when the player is

in pause mode. To return to the normal speed,

press H.

Each time you press

m or M

during Slow-motion play, the playback speed

changes. Two speeds are available. With each

press the indication changes as follows:

Playback direction

y 1

Opposite direction (DVD only)

y 1

The “2 y”/“2

than “1 y”/“1

” playback speed is slower

.”

Note

Depending on the DVD/VIDEO CD, you may not

be able to do some of the operations described.

To locate a point quickly using

the PREV (previous)/NEXT button

(Search)

You can search for a particular point on a disc

using . / > on the player.

Locating a point quickly by

playing a disc in fast forward or

fast reverse (Scan)

During playback, press and hold > on the

player to locate a point in the playback

direction, or press and hold . to locate a

point in the opposite direction. When you find

the point you want, release the button to

return to normal playback speed.

Press

m or M

while playing a

disc. When you find the point you want, press

H to return to normal speed. Each time you

press

playback speed changes. With each press the

indication changes as follows:

m or M

during scan, the

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing one frame at a time

(Freeze Frame)

When the player is in the pause mode, press

STEP to go to the next frame. Press

STEP to go to the preceding frame

Searching for a Title/

Chapter/Track/Scene,

etc. (Search mode)

(DVD only). If you hold the button down, you

can view the frames in succession. To return

to normal playback, press H.

You can search a DVD by title or chapter, and

you can search a VIDEO CD/CD by track,

index, or scene. As titles and tracks are

assigned unique numbers on the disc, you can

select the desired one by entering its number.

Or, you can search for a scene using the time

code.

Number

buttons

CLEAR

MODE

ENTER

Press SEARCH MODE.

The following display appears.

“-- ( )” appears next to the icon (

refers to a number).

The number in parentheses indicates the

total number of titles, tracks, indexes,

scenes, etc. of the disc.

– –(

)

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Press SEARCH MODE repeatedly

to select the search method.

Notes

• You cannot search for a scene on a DVD+RW

using the time code.

• The title, chapter, or track number displayed is the

same number recorded on the disc.

◆ When playing a DVD

TITLE

CHAPTER

TIME/TEXT

NUMBER INPUT

Select “TIME/TEXT” to search for a

starting point by inputting the time code.

◆ When playing a VIDEO CD without PBC

playback

TRACK

INDEX

◆ When playing a VIDEO CD with PBC

Playback

SCENE

INDEX

◆ When playing a CD

TRACK

INDEX

◆ When playing a DATA CD (MP3 audio)

ALBUM

TRACK

Select the number of the title,

track, scene, time code, etc. you

want by pressing the number

buttons to select the digit.

For example, to find the scene at 2 hours,

10 minutes, and 20 seconds after the

beginning, select “TIME/TEXT” in Step

2 and enter “2:10:20.”

If you make a mistake

Cancel the number by pressing CLEAR,

then select another number.

Press ENTER.

The player starts playback from the

selected number.

z Hint

When the display is turned off, you can search for a

chapter (DVD) or track (CD) by pressing the

number buttons and ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

◆ When playing a DVD

• T : : (hours: minutes: seconds)

Playing time of the current title

Viewing Information About the

Disc

* * *

• T– : :

* * *

Remaining time of the current title

Checking the Playing

Time and Remaining

Time

• C : :

* * *

Playing time of the current chapter

• C– : :

* * *

Remaining time of the current chapter

◆ When playing a VIDEO CD (with PBC

functions)

You can check the playing time and

remaining time of the current title, chapter, or

track. Also, you can check the DVD/CD text

or track name (MP3 audio) recorded on the

disc.

•

(minutes: seconds)

* *

Playing time of the current scene

◆ When playing a VIDEO CD (without

PBC functions) or CD

• T

(minutes: seconds)

* *

Playing time of the current track

• T– :

* *

Remaining time of the current track

• D

* *

TIME/TEXT

Playing time of the current disc

• D– :

* *

Remaining time of the current disc

◆ When playing a DATA CD (MP3 audio)

•

(minutes: seconds)

* *

Playing time of the current track

◆ When playing a Super VCD

• T (minutes: seconds)

Playing time of the current track

DISPLAY

* *

To check the DVD/CD text or track name

(MP3 audio)

Press TIME/TEXT repeatedly in Step 2 to

display text recorded on the DVD/CD/DATA

CD.

The DVD/CD text appears only when text is

recorded in the disc. You cannot change the

text. If the disc does not contain text, “NO

TEXT” appears.

For DATA CDs, only the track name of the

MP3 audio track appears.

Press TIME/TEXT during playback.

The following display appears.

T 1:01:57

Time

information

Press TIME/TEXT repeatedly to

change the time information.

The display and the kinds of time that you

can change depend on the disc you are

playing.

BRAHMS SYMPHONY

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

When playing a VIDEO CD (without PBC

functions) or CD

Checking the information on the

front panel display

You can view the time information and text

displayed on the TV screen also on the front

panel display. The information on the front

panel display changes as follows when you

change the time information on your TV

screen.

Playing time and number of the

current track

Remaining time of the current

track

When playing a DVD

Playing time of the disc

Remaining time of the disc

Text

Playing time of the current title

Remaining time of the current title

Playing time of the current chapter

Remaining time of the current

chapter

Current track and index number

(returns to top automatically)

z Hints

Text

• When playing VIDEO CDs with PBC functions,

the scene number or the playing time are

displayed.

• Long text that does not fit in a single line will

scroll across the front panel display.

• You can also check the time information and text

using the Control Bar (page 13).

Current title and chapter number

(returns to top automatically)

Notes

When playing a DATA CD (MP3 audio)

• Depending on the type of disc being played, the

DVD/CD text or track name may not be

displayed.

Playing time and number of the current track

• The player can only display the first level of the

DVD/CD text, such as the disc name or title.

• Playing time of MP3 audio tracks may not be

displayed correctly.

Track name

Download from Www.Somanuals.com. All Manuals Search And Download.

Press AUDIO repeatedly to select

the desired audio signal.

Sound Adjustments

◆ When playing a DVD

Depending on the DVD, the choice of

language varies.

Changing the Sound

When 4 digits are displayed, they

indicate a language code. Refer to

“Language Code List” on page 60 to see

which language the code represents.

When the same language is displayed two

or more times, the DVD is recorded in

multiple audio formats.

When playing a DVD recorded in multiple

audio formats (PCM, Dolby Digital, or DTS),

you can change the audio format. If the DVD

is recorded with multilingual tracks, you can

also change the language.

With CDs, DATA CDs, or VIDEO CDs, you

can select the sound from the right or left

channel and listen to the sound of the selected

channel through both the right and left

speakers. For example, when playing a disc

containing a song with the vocals on the right

channel and the instruments on the left

channel, you can hear the instruments from

both speakers by selecting the left channel.

◆ When playing a VIDEO CD, CD, or

DATA CD (MP3 audio)

The default setting is underlined.

• STEREO: The standard stereo sound

• 1/L: The sound of the left channel

(monaural)

• 2/R: The sound of the right channel

(monaural)

◆ When playing a Super VCD

The default setting is underlined.

• 1:STEREO: The stereo sound of the

audio track 1

• 1:1/L: The sound of the left channel of

the audio track 1 (monaural)

• 1:2/R: The sound of the right channel of

the audio track 1 (monaural)

• 2:STEREO: The stereo sound of the

audio track 2

AUDIO

• 2:1/L: The sound of the left channel of

the audio track 2 (monaural)

• 2:2/R: The sound of the right channel of

the audio track 2 (monaural)

DISPLAY

Checking the audio signal

format

If you press DISPLAY repeatedly during

playback, the format of the current audio

signal (Dolby Digital, DTS, PCM, etc.)

appears as shown below.

Press AUDIO during playback.

The following display appears.

The number in parentheses indicates the

total number of available audio signals.

( ):

1 4 ENGLISH

Example:

Dolby Digital 5.1 ch

Rear (L/R)

DOLBY DIGITAL

3 / 2 .1

Front (L/R)

+ Center

LFE (Low Frequency

Effect)

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

About audio signals

Audio signals recorded in a disc contain the

sound elements (channels) shown below.

Each channel is output from a separate

speaker.

VirtualSurroundSettings

• Front (L)

• Front (R)

• Center

• Rear (L)

When you connect a stereo TV or 2 front

speakers, Virtual Surround lets you enjoy

surround sound effects by using sound

imaging to create virtual rear speakers from

the sound of the front speakers (L: left, R:

right) without using actual rear speakers.

If the player is set up to output the signal from

the DIGITAL OUT (COAXIAL) jack, the

surround effect will only be heard when

“DOLBY DIGITAL” is set to “D-PCM”

(page 54).

• Rear (R)

• Rear (Monaural): This signal can be either

the Dolby Surround Sound processed

signals or the Dolby Digital sound’s

monaural rear audio signals.

• LFE (Low Frequency Effect) signal

Notes

• If “DTS” is set to “OFF” in “AUDIO SETUP,”

the DTS track selection option will not appear on

the screen even if the disc contains DTS tracks

(page 54).

• While playing a Super VCD on which the audio

track 2 is not recorded, no sound will come out

when you select “2:STEREO,” “2:1/L,” or

“2:2/R.”

SUR

Press SUR during playback.

The following display appears.

WIDE

Press SUR repeatedly to select

one of the Virtual Surround

sounds.

Refer to the following explanations given

for each item.

• WIDE

• NIGHT

Download from Www.Somanuals.com. All Manuals Search And Download.

To cancel the setting

Select “OFF” in Step 2.

◆WIDE

Creates virtual rear speakers from the sound

of the front speakers (L, R) without using

actual rear speakers. The virtual speakers are

reproduced as shown in the illustration

below.

This mode is effective when the distance

between the front L and R speakers is short,

such as with built-in speakers on a stereo TV.

: Virtual speaker

◆NIGHT

Large sounds, such as explosions, are

suppressed, but the quieter sounds are

unaffected. This feature is useful when you

want to hear the dialog and enjoy the

surround sound effects of “WIDE” at low

volume.

Notes

• When the playing signal does not contain a signal

for the rear speakers, the surround effects will be

difficult to hear.

• When you select one of theVirtual Surround

modes, turn off the surround setting of the

connected TV or amplifier (receiver).

• Make sure that your listening position is between

and at an equal distance from your speakers, and

that the speakers are located in similar

surroundings.

• Not all discs will respond to the “NIGHT”

function in the same way.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the Playback

Picture (PICTURE MODE)

Enjoying Movies

Displaying the Subtitles

You can adjust the video signal of the DVD or

VIDEO CD from the player to obtain the

picture quality you want. Choose the setting

that best suits the program you are watching.

If subtitles are recorded on the discs, you can

change the subtitles or turn them on and off

whenever you want while playing a DVD.

PICTURE

MODE

SUBTITLE

Press SUBTITLE during playback.

The following display appears.

The number in parentheses indicates the

total number of available subtitles.

Press PICTURE MODE during

playback.

( )

1 8 :ENGLISH

The following display appears.

DYNAMIC

Press SUBTITLE repeatedly to

select the language.

Depending on the DVD, the choice of

language varies.

When 4 digits are displayed, they

indicate a language code. Refer to

“Language Code List” on page 60 to see

which language the code represents.

Press PICTURE MODE repeatedly

to select the setting you want.

The default setting is underlined.

• STANDARD: displays a standard

picture.

• DYNAMIC: produces a bold dynamic

picture by increasing the picture

contrast and the color intensity.

• CINEMA: enhances details in dark

areas by increasing the black level.

To turn off the subtitles

Select “OFF” in Step 2.

Note

Depending on the DVD, you may not be able to

change the subtitles even if multilingual subtitles

are recorded on it. You also may not be able to turn

them off.

z Hint

When you watch a movie, “CINEMA” is

recommended.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the Angles

If various angles (multi-angles) for a scene

are recorded on the DVD, “ ” appears in the

front panel display. This means that you can

change the viewing angle.

ANGLE

Press ANGLE during playback.

The number of the angle appears on the

display.

The number in parentheses indicates the

total number of angles.

( )

2 7

Press ANGLE repeatedly to select

the angle number.

The scene changes to the selected angle.

Note

Depending on the DVD, you may not be able to

change the angles even if multi-angles are recorded

on the DVD.

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Press X/x to select

(PARENTAL

CONTROL), then press ENTER.

The options for “PARENTAL

CONTROL” appear.

Locking Discs

Limiting Playback by

Children ^{(PARENTAL CONTROL)}

PLAYER

PASSWORD

The “PARENTAL CONTROL” function

allows you to set a playback limitation level.

Playback of some DVDs can be limited

according to a predetermined level such as the

age of the users. Scenes may be blocked or

replaced with different scenes.

3 Press X/x to select “PLAYER t,”

then press ENTER.

◆ If you have not entered a password

The display for registering a new

password appears.

Number

buttons

PARENTAL CONTROL

Enter a new 4-digit password, then

ENTER

press

ENTER

Enter a 4-digit password using the

number buttons, then press ENTER.

The display for confirming the password

appears.

DISPLAY

◆ When you have already registered a

password

The display for entering the password

appears.

1 Press DISPLAY while the player is in

stop mode.

The following Control Bar appears.

QUICK

PARENTAL CONTROL

Enter password, then press ^ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Enter or re-enter your 4-digit password

using the number buttons, then press

ENTER.

8 Select the level you want using X/x,

then press ENTER.

Parental Control setting is complete.

The display for setting the playback

limitation level appears.

PARENTAL CONTROL

LEVEL:

4: PG13

USA

STANDARD:

PARENTAL CONTROL

LEVEL:

OFF

USA

STANDARD:

The lower the value, the stricter the

limitation.

5 Press X/x to select “STANDARD,”

then press ENTER.

To turn off the Parental Control function

Set “LEVEL” to “OFF” in Step 8.

The selection items for “STANDARD”

are displayed.

To play a disc for which Parental Control is

set

PARENTAL CONTROL

LEVEL:

OFF

USA

Insert the disc and press H.

The display for entering your password

appears.

STANDARD:

OTHERS

Enter your 4-digit password using the

number buttons, then press ENTER.

The player starts playback.

6 Press X/x to select a geographic area

as the playback limitation level, then

press ENTER.

z Hint

If you forget your password, remove the disc and

repeat Steps 1 to 3 of “Limiting Playback by

Children (PARENTAL CONTROL).” When you

are asked to enter your password, enter “199703”

using the number buttons, then press ENTER. The

display will ask you to enter a new 4-digit

password. After you enter a new 4-digit password,

replace the disc in the player and press H. When

the display for entering your password appears,

enter your new password.

The area is selected.

When you select “OTHERS t,” select

and enter a standard code in the table on

page 48 using the number buttons.

7 Press X/x to select “LEVEL,” then

press ENTER.

The selection items for “LEVEL” are

displayed.

Notes

• When you play discs which do not have the

Parental Control function, playback cannot be

limited on this player.

• Depending on the disc, you may be asked to

change the parental control level while playing

the disc. In this case, enter your password, then

change the level. If the Resume Play mode is

canceled, the level returns to the previous level.

PARENTAL CONTROL

LEVEL:

OFF

STANDARD:

7: NC17

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Area Code

If you make a mistake entering your

password

Press C before you press ENTER and input

the correct number.

Standard

Code

number

Standard

Code

number

Argentina

Australia

Austria

Belgium

Brazil

2044

2047

2046

2057

2070

2079

2090

2092

2115

2165

2174

2109

2248

2238

2254

2276

Korea

2304

2363

2362

2376

2390

2379

2427

2424

2436

2489

2501

2149

2499

2086

2528

2184

If you make a mistake

Malaysia

Mexico

Press O RETURN.

To turn off the display

Press DISPLAY repeatedly until the display

is turned off.

Netherlands

New Zealand

Norway

Canada

Chile

Pakistan

Philippines

Portugal

Russia

China

Denmark

Finland

France

Germany

India

Singapore

Spain

Sweden

Indonesia

Italy

Switzerland

Thailand

Japan

United

Kingdom

Changing the password

1 Press DISPLAY while the player is in

stop mode.

The Control Bar appears.

2 Press X/x to select

(PARENTAL

CONTROL), then press ENTER.

The options for “PARENTAL

CONTROL” appear.

3 Press X/x to select “PASSWORD

t,” then press ENTER.

The display for entering the password

appears.

4 Enter your 4-digit password using the

number buttons, then press ENTER.

5 Enter a new 4-digit password using the

number buttons, then press ENTER.

6 To confirm your password, re-enter it

using the number buttons, then press

ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Press X/x to select “CUSTOM,”

then press ENTER.

Settings and Adjustments

The Setup Display appears.

LANGUAGE SETUP

Using the Setup Display

OSD:

ENGLISH

ORIGINAL

ENGLISH

MENU:

AUDIO:

SUBTITLE:

By using the Setup Display, you can make

various adjustments to items such as picture

and sound. You can also set a language for the

subtitles and the Setup Display, among other

things. For details on each Setup Display

item, see pages from 50 to 54.

Press X/x to select the setup item

from the displayed list:

Note

Playback settings stored in the disc take priority

over the Setup Display settings and not all the

functions described may work.

“LANGUAGE SETUP,” “SCREEN

SETUP,” “CUSTOM SETUP,” or

“AUDIO SETUP.” Then press

ENTER.

The Setup item is selected.

Example: “SCREEN SETUP”

Selected item

SCREEN SETUP

TV TYPE:

4:3 LETTER BOX

SCREEN SAVER:

BACKGROUND:

BLACK LEVEL:

JACKET PICTURE

ENTER

BLACK LEVEL ^{(COMPONENT OUT)}:

Setup items

DISPLAY

Select an item using X/x, then

press ENTER.

The options for the selected item appear.

Example: “TV TYPE”

Press DISPLAY when the player is

in stop mode.

The Control Bar appears.

SCREEN SETUP

4:3 LETTER BOX

4:3 PAN SCAN

16:9

TV TYPE:

QUICK

SCREEN SAVER:

BACKGROUND:

BLACK LEVEL:

BLACK LEVEL ^{(COMPONENT OUT)}:

Options

Press X/x to select

(SETUP),

then press ENTER.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Select a setting using X/x, then

press ENTER.

The setting is selected and setup is

complete.

Example: “16:9”

Setting the Display or

Sound Track Language

(LANGUAGE SETUP)

Selected setting

“LANGUAGE SETUP” allows you to set

various languages for the on-screen display or

sound track.

SCREEN SETUP

TV TYPE:

16:9

SCREEN SAVER:

BACKGROUND:

BLACK LEVEL:

JACKET PICTURE

Select “LANGUAGE SETUP” in the Setup

Display. To use the display, see “Using the

Setup Display” (page 49).

BLACK LEVEL ^{(COMPONENT OUT)}:

LANGUAGE SETUP

OSD:

ENGLISH

ORIGINAL

ENGLISH

MENU:

AUDIO:

SUBTITLE:

To turn off the display

Press DISPLAY repeatedly until the display

is turned off.

To enter the Quick Setup mode

◆ OSD (On-Screen Display)

Select “QUICK” in Step 3. Follow from Step

5 of the Quick Setup explanation to make

basic adjustments (page 23).

Switches the display language on the screen.

◆ MENU (DVD only)

You can select the desired language for the

disc’s menu.

To reset all of the “SETUP” settings

If you select “RESET” in Step 3, you can

reset all of the “SETUP” settings on pages 50

to 54 to the default settings. After you select

“RESET” and press ENTER, select “YES”

and press ENTER to reset the settings (it

takes a few seconds to complete), or select

“NO” and press ENTER to return to the

Control Bar. Do not press [/1 when resetting

the player.

◆ AUDIO (DVD only)

Switches the language of the sound track.

When you select “ORIGINAL,” the language

given priority in the disc is selected.

◆ SUBTITLE (DVD only)

Switches the language of the subtitle recorded

on the DVD.

When you select “AUDIO FOLLOW,” the

language for the subtitles changes according to

the language you selected for the sound track.

z Hint

If you select “OTHERS t” in “MENU,”

“SUBTITLE,” or “AUDIO,” select and enter a

language code from “Language Code List” on

page 60 using the number buttons.

Note

When you select a language in “MENU,”

“SUBTITLE,” or “AUDIO” that is not recorded on

the DVD, one of the recorded languages will be

automatically selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

Settings for the Display

(SCREEN SETUP)

Depending on the DVD, “4:3 LETTER BOX” may

be selected automatically instead of “4:3 PAN

SCAN” or vice versa.

◆ SCREEN SAVER

Choose settings according to the TV to be

connected.

The screen saver image appears when you

leave the player in pause or stop mode for 15

minutes, or when you play back a CD or

DATA CD (MP3 audio) for more than 15

minutes. The screen saver will help prevent

your display device from becoming damaged

(ghosting). Press H to turn off the screen

saver.

Select “SCREEN SETUP” in the Setup

Display. To use the display, see “Using the

Setup Display” (page 49).

The default settings are underlined.

SCREEN SETUP

TV TYPE:

4:3 LETTER BOX

SCREEN SAVER:

BACKGROUND:

BLACK LEVEL:

JACKET PICTURE

Turns on the screen saver.

Turns off the screen saver.

BLACK LEVEL (COMPONENT OUT):

OFF

◆ BACKGROUND

Selects the background color or picture on the

TV screen in stop mode or while playing a

CD or DATA CD (MP3 audio).

◆ TV TYPE

Selects the aspect ratio of the connected TV

(4:3 standard or wide).

JACKET

PICTURE

The jacket picture (still picture)

appears, but only when the

jacket picture is already

4:3

LETTER

BOX

Select this when you connect a

4:3 screen TV. Displays a wide

picture with bands on the upper

and lower portions of the

screen.

recorded on the disc (CD-

EXTRA, etc.). If the disc does

not contain a jacket picture, the

“GRAPHICS” picture appears.

4:3

Select this when you connect a

PAN SCAN 4:3 screen TV. Automatically

displays the wide picture on the

entire screen and cuts off the

GRAPHICS A preset picture stored in the

player appears.

BLUE

The background color is blue.

The background color is black.

portions that do not fit.

BLACK

16:9

Select this when you connect a

wide-screen TV or a TV with a

wide mode function.

◆ BLACK LEVEL

Selects the black level (setup level) for the

video signals output from the jacks other than

4:3 LETTER BOX

COMPONENT VIDEO OUT.

Sets the black level of the

output signal to the standard

level.

4:3 PAN SCAN

OFF

Lowers the standard black

level. Use this when the picture

becomes too white.

16:9

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

◆ BLACK LEVEL (COMPONENT OUT)

Selects the black level (setup level) for the

video signals output from the COMPONENT

VIDEO OUT jacks.

Custom Settings (CUSTOM

SETUP)

Sets the black level of the

output signal to the standard

level.

Use this to set up playback related and other

settings.

OFF

Lowers the standard black

level. Use this when the picture

becomes too white.

Select “CUSTOM SETUP” in the Setup

Display. To use the display, see “Using the

Setup Display” (page 49).

The default settings are underlined.

CUSTOM SETUP

AUTO POWER OFF:

AUTO PLAY:

OFF

BRIGHT

AUTO

OFF

DIMMER:

PAUSE MODE:

TRACK SELECTION:

DISC RESUME:

◆ AUTO POWER OFF

Switches the Auto Power Off setting on or

off.

OFF

Switches this function off.

The player enters standby mode

when left in stop mode for more

than 30 minutes.

◆ AUTO PLAY

Switches the Auto Play setting on or off. This

function is useful when the player is

connected to a timer (not supplied).

OFF

Switches this function off.

Automatically starts playback

when the player is turned on.

◆ DIMMER

Adjusts the lighting of the front panel display.

BRIGHT

DARK

Makes the lighting bright.

Makes the lighting dark.

Download from Www.Somanuals.com. All Manuals Search And Download.

◆ PAUSE MODE (DVD only)

Selects the picture in pause mode.

Settings for the Sound

AUTO

The picture, including subjects

(AUDIO SETUP)

that move dynamically, is

output with no jitter. Normally

select this position.

“AUDIO SETUP” allows you to set the sound

according to the playback and connection

conditions.

FRAME

The picture, including subjects

that do not move dynamically,

is output in high resolution.

Select “AUDIO SETUP” in the Setup

Display. To use the display, see “Using the

Setup Display” (page 49).

◆ TRACK SELECTION (DVD only)

Gives the sound track which contains the

highest number of channels priority when you

play a DVD on which multiple audio formats

(PCM, DTS, or Dolby Digital format) are

recorded.

The default settings are underlined.

AUDIO SETUP

AUDIO ATT:

AUDIO DRC:

DOWNMIX:

DIGITAL OUT:

DOLBY DIGITAL:

DTS:

OFF

STANDARD

DOLBY SURROUND

D-PCM

OFF

No priority given.

Priority given.

OFF

AUTO

◆ AUDIO ATT (attenuation)

Notes

If the playback sound is distorted, set this

item to “ON.” The player reduces the audio

output level.

• When you set the item to “AUTO,” the language

may change. The “TRACK SELECTION” setting

has higher priority than the “AUDIO” settings in

“LANGUAGE SETUP” (page 50).

• If you set “DTS” to “OFF” (page 54), the DTS

sound track is not played even if you set “TRACK

SELECTION” to “AUTO.”

• If PCM, DTS, and Dolby Digital sound tracks

have the same number of channels, the player

selects PCM, DTS, and Dolby Digital sound

tracks in this order.

This function affects the output of the LINE

OUT L/R (AUDIO) jacks.

OFF

Normally, select this position.

Select this when the playback sound

from the speakers is distorted.

◆ AUDIO DRC (Dynamic Range Control)

(DVD only)

◆ DISC RESUME (DVD/VIDEO CD only)

Switches the Disc Resume setting on or off.

Resume playback can be stored in memory

for up to 6 different DVD/VIDEO CD discs

(page 27).

Makes the sound clear when the volume is

turned down when playing a DVD that

conforms to “AUDIO DRC.” This affects the

output from the following jacks:

– LINE OUT L/R (AUDIO) jacks

– DIGITAL OUT (COAXIAL) jack only

when “DOLBY DIGITAL” is set to “D-

PCM” (page 54).

Stores the resume settings in

memory for up to six discs (The

settings remain in memory even

if you select OFF.)

OFF

Does not store the resume

STANDARD Normally select this position.

settings in memory. Playback

restarts at the resume point only

for the current disc in the player.

TV MODE

Makes the low sounds clear

even if you turn the volume

down.

WIDE

RANGE

Gives you the feeling of being

at a live performance.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

If you connect a component that does not

conform to the selected audio signal, a loud

noise (or no sound) will come out from the

speakers, affecting your ears or causing the

speakers to be damaged.

◆ DOWNMIX (DVD only)

Switches the method for mixing down to 2

channels when you play a DVD which has

rear sound elements (channels) or is recorded

in Dolby Digital format. For details on the

rear signal components, see “Checking the

audio signal format” (page 41). This function

affects the output of the following jacks:

– LINE OUT L/R (AUDIO) jacks

◆ DOLBY DIGITAL (DVD only)

Selects the type of Dolby Digital signal.

D-PCM

Select this when the player is

connected to an audio

– DIGITAL OUT (COAXIAL) jack when

“DOLBY DIGITAL” is set to “D-PCM”

(page 54).

component without a built-in

Dolby Digital decoder. You can

select whether the signals

conform to Dolby Surround

(Pro Logic) or not by making

adjustments to the

DOLBY

SUR-

ROUND

Normally, select this position.

Multi-channel audio signals are

output to two channels for

enjoying surround sounds.

“DOWNMIX” item in

“AUDIO SETUP” (page 54).

NORMAL Multi-channel audio signals are

downmixed to two channels for

use with your stereo.

DOLBY

DIGITAL

Select this when the player is

connected to an audio

component with a built-in

Dolby Digital decoder.

◆ DIGITAL OUT

Selects if audio signals are output via the

DIGITAL OUT (COAXIAL) jack.

◆ DTS (DVD only)

Selects whether or not to output DTS signals.

Normally select this position. When

you select “ON,” see “Setting the

digital output signal” for further

settings.

OFF

Select this when the player is

connected to an audio

component without a built-in

DTS decoder.

OFF The influence of the digital circuit

upon the analog circuit is minimal.

Select this when the player is

connected to an audio

component with a built-in DTS

decoder.

Setting the digital output signal

Switches the method of outputting audio

signals when you connect a component such

as an amplifier (receiver) or MD deck with a

digital input jack.

For connection details, see page 18.

Select “DOLBY DIGITAL” and “DTS” after

setting “DIGITAL OUT” to “ON.”

AUDIO SETUP

AUDIO ATT:

AUDIO DRC:

DOWNMIX:

DIGITAL OUT:

DOLBY DIGITAL:

DTS:

OFF

STANDARD

DOLBY SURROUND

D-PCM

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound

Additional Information

There is no sound.

, Re-connect the connecting cord securely.

, The connecting cord is damaged.

, The player is connected to the wrong input

jack on the amplifier (receiver) (page 20,

21, 22).

, The amplifier (receiver) input is not

correctly set.

, The player is in pause mode or in Slow-

motion Play mode.

Troubleshooting

If you experience any of the following

difficulties while using the player, use this

troubleshooting guide to help remedy the

problem before requesting repairs.

Should any problem persist, consult your

nearest Aiwa dealer (for customers in the

U.S.A only).

, The player is in fast forward or fast reverse

mode.

, If the audio signal does not come through

the DIGITAL OUT (COAXIAL) jack,

check the audio settings (page 54).

, While playing a Super VCD on which the

audio track 2 is not recorded, no sound will

come out when you select “2:STEREO,”

“2:1/L,” or “2:2/R.”

Power

The power is not turned on.

, Check that the AC power cord is connected

securely.

Picture

Sound is noisy.

There is no picture/picture noise appears.

, Re-connect the connecting cord securely.

, The connecting cords are damaged.

, Check the connection to your TV (page 16)

and switch the input selector on your TV so

that the signal from the player appears on

the TV screen.

, When playing a CD with DTS sound tracks,

noise will come from the LINE OUT L/R

(AUDIO) jacks (page 25) or DIGITAL

OUT (COAXIAL) jack.

Sound distortion occurs.

, Set “AUDIO ATT” in “AUDIO SETUP” to

“ON” (page 53).

, The disc is dirty or flawed.

, If the picture output from your player goes

through your VCR to get to your TV or if

you are connected to a combination TV/

VIDEO player, the copy-protection signal

applied to some DVD programs could affect

picture quality. If you still experience

problems even when you connect your

player directly to your TV, please try

connecting your player to your TV’s S

VIDEO input (page 16).

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set

“AUDIO DRC” to “TV MODE” (page 53).

, Set “AUDIO ATT” in “AUDIO SETUP” to

“OFF” (page 53).

Operation

The remote does not function.

, There are obstacles between the remote and

the player.

, The distance between the remote and the

player is too far.

Even though you set the aspect ratio in “TV

TYPE” of “SCREEN SETUP,” the picture

does not fill the screen.

, The aspect ratio of the disc is fixed on your

DVD.

, The remote is not pointed at the remote

sensor on the player.

, The batteries in the remote are weak.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

The disc does not play.

, The disc is turned over.

Insert the disc with the playback side facing

down on the disc tray.

You cannot perform some functions such

as Stop, Search, Slow-motion Play,

Repeat Play, Shuffle Play, or Program

Play.

, The disc is skewed.

, Depending on the disc, you may not be able

to do some of the operations above. See the

operating manual that comes with the disc.

The player cannot play certain discs (page 7).

, The region code on the DVD does not match

the player.

, Moisture has condensed inside the player

(page 3).

, The player cannot play a recorded disc that

is not correctly finalized (page 7).

The language for the sound track cannot

be changed.

, Try using the DVD’s menu instead of the

direct selection button on the remote (page

28).

, Multilingual tracks are not recorded on the

DVD being played.

The MP3 audio track cannot be played

(page 30).

, The DATA CD is not recorded in the MP3

format that conforms to ISO9660 Level 1/

Level 2 or Joliet.

, The DVD prohibits the changing of the

language for the sound track.

, The MP3 audio track does not have the

extension “.MP3.”

The subtitle language cannot be changed

, The data is not formatted in MP3 even

though it has the extension “.MP3.”

, The data is not MPEG1 Audio Layer 3 data.

, The player cannot play audio tracks in

MP3PRO format.

or turned off.

, Try using the DVD’s menu instead of the

direct selection button on the remote (page

28).

, Multilingual subtitles are not recorded on

the DVD being played.

, The DVD prohibits the changing of the

subtitles.

The title of the MP3 audio album or track

is not correctly displayed.

The player can only display numbers and

alphabet. Other characters are displayed as

“*”.

The angles cannot be changed.

, Try using the DVD’s menu instead of the

direct selection button on the remote (page

28).

, Multi-angles are not recorded on the DVD

being played.

The disc does not start playing from the

beginning.

, Program Play, Shuffle Play, Repeat Play, or

A-B Repeat Play has been selected (page

32).

, The angle can only be changed when the

“

” indicator lights up on the front panel

display (page 10).

, Resume play has taken effect (page 27).

, The DVD prohibits changing of the angles.

The player starts playing the disc

automatically.

, The disc features an auto playback function.

, “AUTO PLAY” in “CUSTOM SETUP” is

set to “ON” (page 52).

The player does not operate properly.

, When static electricity, etc., causes the

player to operate abnormally, unplug the

player.

5 numbers or letters are displayed on the

Playback stops automatically.

, While playing discs with an auto pause

signal, the player stops playback at the auto

pause signal.

screen and on the front panel display.

, The self-diagnosis function was activated.

(See the table on page 57.)

Download from Www.Somanuals.com. All Manuals Search And Download.

The disc tray does not open and “LOCKED”

appears on the front panel display.

, Child Lock is set (page 26).

Self-diagnosis Function

(When letters/numbers appear in the

display)

The disc tray does not open and “TRAY

LOCKED” appears on the front panel

When the self-diagnosis function is activated

to prevent the player from malfunctioning, a

five-character service number (e.g., C 13 50)

with a combination of a letter and four digits

appears on the screen and the front panel

display. In this case, check the following

table.

display.

, Contact your Aiwa dealer or local

authorized Aiwa service facility.

“Data error” appears on the TV screen

when playing a DATA CD.

, The MP3 audio track you want to play is

broken.

, The data is not MPEG 1 Audio Layer 3 data.

C:13:50

First three

Cause and/or corrective

characters of action

the service

number

C 13

The disc is dirty.

,Clean the disc with a soft

cloth (page 8).

C 31

The disc is not inserted

correctly.

,Re-insert the disc

correctly.

E XX

To prevent a malfunction, the

(xx is a number) player has performed the

self-diagnosis function.

,Contact your nearest

Aiwa dealer or local

authorized Aiwa service

facility and give the 5-

character service number.

Example: E 61 10

Download from Www.Somanuals.com. All Manuals Search And Download.

The picture data uses the MPEG 2 format, one

of the worldwide standards of digital

compression technology. The picture data is

compressed to about 1/40 (average) of its

original size. The DVD also uses a variable

rate coding technology that changes the data

to be allocated according to the status of the

picture. Audio information is recorded in a

multi-channel format, such as Dolby Digital,

allowing you to enjoy a more real audio

presence.

Glossary

Chapter (page 10)

Sections of a picture or a music feature that

are smaller than titles. A title is composed of

several chapters. Depending on the disc, no

chapters may be recorded.

Dolby Digital (page 22, 54)

Digital audio compression technology

Furthermore, various advanced functions

such as the multi-angle, multilingual, and

Parental Control functions are provided with

the DVD.

developed by Dolby Laboratories. This

technology conforms to 5.1-channel surround

sound. The rear channel is stereo and there is

a discrete subwoofer channel in this format.

Dolby Digital provides the same 5.1 discrete

channels of high quality digital audio found in

Dolby Digital cinema audio systems. Good

channel separation is realized because all of

the channel data are recorded discretely and

little deterioration is realized because all

channel data processing is digital.

DVD-RW (page 6)

A DVD-RW is a recordable and rewritable

disc that is the same size as a DVD VIDEO.

The DVD-RW has two different modes: VR

mode and Video mode. DVD-RWs created in

Video mode have the same format as a DVD

VIDEO, while discs created in VR (Video

Recording) mode allow the contents to be

programmed or edited.

Dolby Surround (Pro Logic) (page 21)

Audio signal processing technology that

Dolby Laboratories developed for surround

sound. When the input signal contains a

surround component, the Pro Logic process

outputs the front, center and rear signals. The

rear channel is monaural.

DVD+RW (page 6)

A DVD+RW (plus RW) is a recordable and

rewritable disc. DVD+RWs use a recording

format that is comparable to the DVD VIDEO

format.

Index (CD)/Video Index (VIDEO CD) (page

37)

A number that divides a track into sections to

easily locate the point you want on a CD or

VIDEO CD. Depending on the disc, no index

may be recorded.

DTS (page 22, 54)

Digital audio compression technology that

Digital Theater Systems, Inc. developed. This

technology conforms to 5.1-channel surround

sound. The rear channel is stereo and there is

a discrete subwoofer channel in this format.

DTS provides the same 5.1 discrete channels

of high quality digital audio.

Good channel separation is realized because

all of the channel data is recorded discretely

and little deterioration is realized because all

channel data processing is digital.

Scene (page 10)

On a VIDEO CD with PBC (playback

control) functions, the menu screens, moving

pictures and still pictures are divided into

sections called “scenes.”

DVD (page 6)

A disc that contains up to 8 hours of moving

pictures even though its diameter is the same

as a CD.

The data capacity of a single-layer and single-

sided DVD is 4.7 GB (Giga Byte), which is 7

times that of a CD. The data capacity of a

double-layer and single-sided DVD is 8.5

GB, a single-layer and double-sided DVD is

9.4 GB, and double-layer and double-sided

DVD is 17GB.

Title (page 10)

The longest section of a picture or music

feature on a DVD, movie, etc., in video

software, or the entire album in audio

software.

Track (page 10)

Sections of a picture or a music feature on a

CD or VIDEO CD (the length of a song).

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

System

Laser: Semiconductor laser

Signal format system: NTSC

General

Power requirements:

120 V AC, 60 Hz

110 to 240 V AC, 50/60 Hz

See page 3 for further information.

Power consumption: 13 W

Dimensions (approx.): 430 ×55.5 ×

Audio characteristics

Frequency response: DVD VIDEO (PCM

96 kHz): 2 Hz to 44 kHz ( 1.0 dB)/DVD

VIDEO (PCM 48 kHz): 2 Hz to 22 kHz

( 0.5 dB)/CD: 2 Hz to 20 kHz ( 0.5 dB)

Signal-to-noise ratio (S/N ratio): 115 dB

(LINE OUT (L/R) AUDIO jacks only)

Harmonic distortion: 0.003 %

234 mm (17 × 2 ³/16 × 9 ¹

in.) (width/

height/depth) incl. projecting parts

Mass (approx.): 2.2 kg (4 lb 14 oz)

Operating temperature: 5 °C to 35 °C

(41 °F to 95 °F)

Dynamic range: DVD VIDEO: 103 dB/CD:

99 dB

Wow and flutter: Less than detected value

( 0.001% W PEAK)

Operating humidity: 25 % to 80 %

Supplied accessories

See page 15.

The signals from LINE OUT L/R (AUDIO)

jacks are measured. When you play PCM

sound tracks with a 96 kHz sampling

frequency, the output signals from the

DIGITAL OUT ( COAXIAL) jack are

converted to 48 kHz sampling frequency.

Specifications and design are subject to

change without notice.

ENERGY STAR^Ris a U.S. registered mark.

^{As an}ENERGY STAR^RPartner, Sony

Corporation has determined that this product

^{meets the}ENERGY STAR^Rguidelines for

energy efficiency.

Outputs/Inputs

(Jack name: Jack type/Output or Input level/

Load impedance)

LINE OUT (AUDIO): Phono jack/2 Vrms/

10 kilohms

DIGITAL OUT (COAXIAL): Phono jack/

0.5 Vp-p/75 ohms

COMPONENT VIDEO OUT (Y, PB, PR):

Phono jack/Y: 1.0 Vp-p/PB, PR:

0.65 Vp-p/75 ohms

LINE OUT (VIDEO): Phono jack/1.0 Vp-p/

75 ohms

S VIDEO OUT: 4-pin mini DIN/Y:

1.0 Vp-p, C: 0.286 Vp-p/75 ohms

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

For details, see pages 41, 44, 50.

The language spellings conform to the ISO 639: 1988 (E/F) standard.

Code Language

1027 Afar

1183 Irish

1347 Maori

1507 Samoan

1508 Shona

1509 Somali

1511 Albanian

1512 Serbian

1513 Siswati

1514 Sesotho

1515 Sundanese

1516 Swedish

1517 Swahili

1521 Tamil

1028 Abkhazian

1032 Afrikaans

1039 Amharic

1044 Arabic

1045 Assamese

1051 Aymara

1052 Azerbaijani

1053 Bashkir

1057 Byelorussian

1059 Bulgarian

1060 Bihari

1061 Bislama

1066 Bengali;

Bangla

1067 Tibetan

1070 Breton

1079 Catalan

1093 Corsican

1097 Czech

1103 Welsh

1105 Danish

1109 German

1130 Bhutani

1142 Greek

1144 English

1145 Esperanto

1149 Spanish

1150 Estonian

1151 Basque

1157 Persian

1165 Finnish

1166 Fiji

1186 Scots Gaelic

1194 Galician

1196 Guarani

1203 Gujarati

1209 Hausa

1349 Macedonian

1350 Malayalam

1352 Mongolian

1353 Moldavian

1356 Marathi

1357 Malay

1358 Maltese

1363 Burmese

1365 Nauru

1217 Hindi

1226 Croatian

1229 Hungarian

1233 Armenian

1235 Interlingua

1239 Interlingue

1245 Inupiak

1248 Indonesian

1253 Icelandic

1254 Italian

1257 Hebrew

1261 Japanese

1269 Yiddish

1283 Javanese

1287 Georgian

1297 Kazakh

1298 Greenlandic

1299 Cambodian

1300 Kannada

1301 Korean

1305 Kashmiri

1307 Kurdish

1311 Kirghiz

1369 Nepali

1376 Dutch

1525 Telugu

1527 Tajik

1528 Thai

1379 Norwegian

1393 Occitan

1403 (Afan)Oromo

1408 Oriya

1417 Punjabi

1428 Polish

1435 Pashto;

Pushto

1436 Portuguese

1463 Quechua

1481 Rhaeto-

Romance

1482 Kirundi

1483 Romanian

1489 Russian

1491 Kinyarwanda

1495 Sanskrit

1498 Sindhi

1501 Sangho

1502 Serbo-

Croatian

1529 Tigrinya

1531 Turkmen

1532 Tagalog

1534 Setswana

1535 Tonga

1538 Turkish

1539 Tsonga

1540 Tatar

1543 Twi

1557 Ukrainian

1564 Urdu

1572 Uzbek

1581 Vietnamese

1587 Volapük

1613 Wolof

1632 Xhosa

1665 Yoruba

1684 Chinese

1697 Zulu

1313 Latin

1326 Lingala

1327 Laothian

1332 Lithuanian

1334 Latvian;

Lettish

1171 Faroese

1174 French

1181 Frisian

1503 Singhalese

1505 Slovak

1506 Slovenian

1345 Malagasy

1703 Not specified

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Numerics

16:9 51

Fast forward 36

Fast reverse 36

Freeze Frame 36

Front panel display 10

S VIDEO output 16

Scan 36

4:3 LETTER BOX 51

4:3 PAN SCAN 51

5.1 Channel Surround 41

SCENE 37

Scene 10, 58

SCREEN SAVER 51

SCREEN SETUP 51

Searching 36

A-B REPEAT 35

ALBUM 37

Handling discs 8

Hooking up 15

SETUP 49

Album 30

ANGLE 45

Setup Display 49

SHUFFLE 33

Shuffle Play 33

Slow-motion Play 36

Speakers

Hooking up 18

SUBTITLE 44, 50

SURROUND 18, 42

INDEX 37

Index 58

AUDIO 41, 50

AUDIO ATT 53

AUDIO DRC 53

AUDIO SETUP 53

AUTO PLAY 52

AUTO POWER OFF 52

Instant Replay 26

Instant Search 26

LANGUAGE SETUP 50

Locating

a specific point by watching

the TV screen 36

BACKGROUND 51

Batteries 15

TIME/TEXT 38, 39

TITLE 37

BLACK LEVEL 51

Title 10, 58

TOP MENU 28

TRACK 37

MENU 50

MP3 6, 30, 56

CD 6, 25

Track 10, 30, 58

TRACK SELECTION 53

Troubleshooting 55

TV TYPE 51

CHAPTER 37

Chapter 10, 58

Child Lock 26

Connecting 16

Continuous play

CD/VIDEO CD 25

DVD 25

NUMBER INPUT 38

On-screen display

Control Bar display 13

Setup Display 49

OSD 50

Usable discs 6

Control Bar 13

CUSTOM 49

CUSTOM SETUP 52

VIDEO CD 6, 25

Virtual Surround 42

PARENTAL CONTROL 46

PAUSE MODE 53

PBC Playback 29

PICTURE MODE 44

PRO LOGIC 21, 54, 58

PROGRAM 32

DATA CD 6, 30

DIGITAL OUT 54

Digital output 54

DIMMER 52

DISC RESUME 27, 53

Program Play 32

Display

Control Bar display 13

Front panel display 10

Setup Display 49

DOLBY DIGITAL 22, 41,

54, 58

QUICK 50

Quick Setup 23, 50

DOWNMIX 54

DTS 22, 41, 54, 58

DVD 6, 25

Remote 15

REPEAT 34

Repeat Play 34

RESET 50

Resume Play 27

DVD+RW 6, 26, 58

DVD’s Menu 28

DVD-RW 6, 26, 58

Download from Www.Somanuals.com. All Manuals Search And Download.

Printed on 100% recycled magazine paper.

Printed using VOC (volatile organic compound)-free vegetable oil based ink.

Sony Corporation Printed in Malaysia

http://www.aiwa.com/

Download from Www.Somanuals.com. All Manuals Search And Download.

Acer Tablet B1 720 L864 User Manual
ACR Electronics Marine Safety Devices 9490 User Manual
Admiral Kitchen Utensil Kitchen Utensil User Manual
ADTRAN Network Card NetVanta ADSL NIM User Manual
AEG Microwave Oven MCD1751E User Manual
Alice Law Telephone ATS 4121CL User Manual
Alliance Laundry Systems Washer CFD14C User Manual
Alpine Automobile Alarm SEC 100S User Manual
Amana Microwave Oven MVH130 User Manual
Americana Appliances Stereo System CDR 850 User Manual