Aiwa CD Player CSD TD52 User Manual

CSD-TD51

CSD-TD52

CSD-TD53

U(S),K(S),EZ(S)

U(W)

U(L)

SERVICE MANUAL

COMPACT DISC RADIO

CASSETTE RECORDER

• BASIC TAPE MECHANISM : TN-21ZVC-2000

• BASIC CD MECHANISM : DA11T3C

This Service Manual is the “Revision Publishing” and replaces “Simple Manual”

CSD-TD51 U(S)/TD52 U(W)/TD53 U(L)(S/M Code No. 09-003-343-3T1)

CSD-TD51 EZ(S),K(S)(S/M Code No. 09-003-343-3T2).

S/M Code No. 09-003-343-3R1

Download from Www.Somanuals.com. All Manuals Search And Download.

PROTECTION OF EYES FROM LASER BEAM DURING SERVICING

This set employs laser. Therefore, be sure to follow carefully the

instructions below when servicing.

CAUTION

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

WARNING!

WHEN SERVICING, DO NOT APPROACH THE LASER EXIT

WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO

CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE

FROM A DISTANCE OF MORE THAN 30cm FROM THE

SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL

PICK-UP BLOCK.

ATTENTION

L'utilisation de commandes, réglages ou procédures autres que

ceux spécifiés peut entraîner une dangereuse exposition aux

radiations.

ADVARSEL!

Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude

af funktion. Undgå udsættelse for stråling.

Caution: Invisible laser radiation when

open and interlocks defeated avoid expo-

sure to beam.

This Compact Disc player is classified as a CLASS 1 LASER

Advarsel:Usynling laserståling ved åbning,

når sikkerhedsafbrydere er ude af funktion.

Undgå udsættelse for stråling.

product.

The CLASS 1 LASER PRODUCT label is located on the rear

exterior.

VAROITUS!

Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainit-

ulla tavalla saattaa altistaa käyt-täjän turvallisuusluokan 1 ylit-

tävälle näkymättömälle lasersäteilylle.

CLASS 1

LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

VARNING!

Om apparaten används på annat sätt än vad som specificeras i

denna bruksanvising, kan användaren utsättas för osynling

laserstrålning, som överskrider gränsen för laserklass 1.

KLASS 1

LASER APPARAT

Precaution to replace Optical block

(SF-P101NR)

Body or clothes electrostatic potential could ruin

laser diode in the optical block. Be sure ground

body and workbench, and use care the clothes

do not touch the diode.

1) After the connection, remove solder shown in

the right figure.

PICK UP ASSY

SF-P101NR

Solder

TO/FROM CD C.B

Download from Www.Somanuals.com. All Manuals Search And Download.

ELECTRICAL MAIN PARTS LIST

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

C317

C801

C805

C806

C807

87-010-197-080

87-010-248-080

87-012-365-080

87-010-405-080

CAP, CHIP 0.01 DM

CAP, ELECT 220-10V

C-CAP,S 0.027-25VBK

CAP, ELECT 10-50V

87-A21-550-010

87-A21-185-040

87-A21-064-010

87-A21-520-040

87-A20-446-010

IC,TA2149N

C-IC,LC72121M

IC,LA4227

C-IC,M61509FP

C-IC,LA9241ML

C808

C809

C810

C811

C812

87-010-405-080

87-010-401-080

87-010-178-080

CAP, ELECT 10-50V

CAP, ELECT 1-50V

CHIP CAP 1000P

87-A20-459-010

87-A21-093-010

8A-CH4-661-010

87-A21-431-010

C-IC,LC78622ED

IC,LA6541D

C-IC,LC867132V-5P07

IC,BA4560N

C816

C817

C821

C822

C823

87-010-180-080

87-010-401-080

87-010-178-080

C-CER 1500P

CAP, ELECT 1-50V

CHIP CAP 1000P

TRANSISTOR

89-327-143-080

87-026-447-080

89-111-624-080

87-026-213-080

89-503-025-010

TR,2SC2714 (0.1W)

TR,2SC1740S R

TR,2SA1162Y

C824

C829

C830

C833

C834

87-010-178-080

87-018-195-080

87-010-248-080

CHIP CAP 1000P

CHIP-TR,DTC114YK

CHIP CAP 1000P

C-FET,2SK302GR<51 K<S>,51 EZ<S>>

CHIP CAP 1000P

CAP, CER 1200P-16V

CAP, ELECT 220-10V

89-320-011-080

87-026-230-080

TR,2SC2001 (15W)<51 K<S>,51

EZ<S>>

CHIP-TR,DTA114YK<51 K<S>,51

C835

C836

C843

C844

C845

87-010-322-080

87-010-197-080

87-018-124-080

87-010-178-080

C-CAP,S 100P-50 CH

CAP, CHIP 0.01 DM

CAP, CER 270P-50V

CHIP CAP 1000P

EZ<S>>

89-327-125-080

89-112-965-080

87-026-463-080

CHIP TR,2SC2712GR

TR,2SA1296 (0.75W)

TR,2SA933S (0.3W)

87-026-291-080

89-213-702-080

87-026-462-080

89-318-154-080

89-109-332-380

TR,DTC124XS

C846

C851

C852

C853

CN201

87-010-263-080

87-010-186-080

87-010-178-080

87-018-211-080

87-099-018-010

CAP, ELECT 100-10V

CAP,CHIP 4700P

CHIP CAP 1000P

CAP, CER 0.01-50

CONN,16P

TR,2SB1370E

TR,2SC1740 S(RS 0.3W)

TR,2SC1815 (0.4W)

TR,2SA933RS

89-113-187-080

87-026-295-080

87-026-237-080

87-026-239-080

87-026-464-080

TR,2SA1318TU

CN801

CNA302

CNA801

L801

87-A60-110-010

8A-CD9-629-010

8A-CD9-630-010

87-007-342-010

8Z-CD9-609-010

CONN,4P V S2M-4W

CONN ASSY,6P MA-TU

CONN ASSY, 4P RPH

COIL,OSC 85K BIAS

SW,SL 1-6-2 PS62D01

TR,DTC144TK

CHIP-TR,DTC124XK

TR,DTC114TK (0.2W)

TR,DTC114TS (0.3W)

SW801

DIODE

CD C.B

87-070-345-080

87-A40-616-070

87-A40-128-080

87-017-072-080

87-027-399-080

DIODE,IN4148

C30

87-010-260-080

87-010-404-080

87-010-402-080

87-010-178-080

CAP, ELECT 47-25V

CAP, ELECT 4.7-50V

CAP, ELECT 2.2-50V

CHIP CAP 1000P

VARI-CAP,SVC384(S/T)

C-VARI-CAP,HVU202A

ZENER,HZS3B1

C251

C261

C262

C263

ZENER,HZ7A3L (200MA)<51 U<S>,53

U<L>,52 U<W>>

C264

C265

C266

C267

C268

87-010-178-080

87-010-263-080

87-010-112-080

CHIP CAP 1000P

87-027-607-080

87-A40-648-080

87-017-978-080

87-020-465-080

87-027-702-080

ZENER,HZ7B3L<51 K<S>,51 EZ<S>>

ZENER,MTZJ8.2A

DIODE,1N4003

DIODE,1SS133 (110MA)

DIODE,ZENER HZ6C2L (200MA)

CAP, ELECT 100-10V

CAP, ELECT 100-16V

C271

C272

C278

C279

C301

87-010-237-080

87-010-405-080

87-010-385-080

87-016-495-000

CAP, ELECT 1000-16V

CAP, ELECT 10-50V

CAP, ELECT 220-25V

CAP,E 3300-25 M SMG

87-A40-465-010

DIODE,FR202

MAIN C.B

C211

C212

C215

C216

C231

87-A11-603-080

87-016-460-080

87-010-213-080

CAP, S 0.05-16

C306

C307

C308

C311

C312

87-010-404-080

87-010-401-080

87-010-221-080

87-010-263-080

87-010-385-080

CAP, ELECT 4.7-50V

CAP, ELECT 1-50V

CAP, ELECT 470-10V

CAP, ELECT 10-10V

CAP, ELECT 220-25V

CAP, S 0.15-16

C-CAP,S 0.22-16 B

C-CAP,S 0.015-50 B

C232

C233

C234

C235

C236

87-010-213-080

87-A10-201-080

87-016-669-080

C-CAP,S 0.015-50 B

C-CAP,S0.33-16 KB

C-CAP,S 0.1-25 K B

C321

C322

C325

C401

C402

87-010-197-080

87-010-263-080

87-010-405-080

87-010-403-080

87-010-197-080

CAP, CHIP 0.01 DM

CAP, ELECT 100-10V

CAP, ELECT 10-50V

CAP, ELECT 3.3-50V

CAP, CHIP 0.01 DM

C237

C239

C240

C247

C248

87-010-371-080

87-010-197-080

87-010-401-080

CAP, ELECT 470-50V

CAP, CHIP 0.01 DM

CAP, ELECT 1-50V

C403

C404

C405

C406

C407

87-010-263-080

87-010-248-080

87-010-197-080

87-010-374-080

87-010-178-080

CAP, ELECT 100-10V

CAP, ELECT 220-10V

CAP, CHIP 0.01 DM

CAP, ELECT 47-10V

CHIP CAP 1000P

C310

C316

87-010-248-080

87-010-263-080

CAP, ELECT 220-10V

CAP,E 100-10

C408

C409

87-010-198-080

87-010-248-080

CAP, CHIP 0.022

CAP, ELECT 220-10V

Download from Www.Somanuals.com. All Manuals Search And Download.

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

C410

C411

C412

C413

C414

87-010-263-080

87-A11-177-080

87-010-401-080

87-016-369-080

87-010-405-080

CAP, ELECT 100-10V

C-CAP,S 0.15-16 K B

CAP, ELECT 1-50V

C-CAP,S 0.033-25 B K

CAP, ELECT 10-50V

C503

C504

C505

C506

C510

87-010-322-080

87-016-669-080

C-CAP,S 100P-50 CH

C-CAP,S 0.1-25 K B

C416

C417

C418

C419

C420

87-010-545-080

87-012-157-080

87-010-213-080

87-A11-608-080

87-016-369-080

CAP, ELECT 0.22-50V

C-CAP,S 330P-50 CH

C-CAP,S 0.015-50 B

C-CAP,S 0.33-25 K B

C-CAP,S 0.033-25 B K

C831

87-010-198-080

8A-CH4-689-010

87-A60-109-010

8A-CH4-689-010

87-A60-424-010

CAP, CHIP 0.022

CONN,3P V 2.5

CN202

CN205

CN301

CN401

CONN,2P V S2M-2W

CONN,3P V 2.5

CONN,16P V TOC-B

C421

C422

C423

C424

C425

87-A11-177-080

87-010-183-080

87-010-956-080

87-010-993-080

87-010-176-080

C-CAP,S 0.15-16 K B

C-CAP,S 2700P-50 B

CHIP-CAP,S 0.068-25B

C-CAP,S 0.056-25 B

C-CAP,S 680P-50 SL

CN403

87-099-201-010

8A-CH4-687-010

8A-CD9-631-010

8A-CD9-625-010

8A-CD9-631-010

CONN,8P 6216 H

CN802

CONN,4P V 2.5

CNA205

CNA402

CNA802

CONN ASSY, 2P DOOR

CONN ASSY,6P CD-ME

CONN ASSY, 4P TP-ME

C426

C428

C429

C430

C431

87-A11-608-080

87-010-197-080

87-010-186-080

87-012-156-080

87-010-545-080

C-CAP,S 0.33-25 K B

CAP, CHIP 0.01 DM

CAP,CHIP 4700P

C-CAP,S 220P-50 CH

CAP, ELECT 0.22-50V

L401

87-003-102-080

87-003-152-080

87-024-437-080

87-036-389-010

8Z-CD5-633-010

COIL, 10UH

L404

COIL, 100UH

SFR430

SW205

X401

SFR100K,RH063EC

SW, PUSH 1-1-1 R8120125

VIB, CER16.93MHZ FCR16.93M2

C432

C433

C434

C435

C436

87-010-374-080

87-010-401-080

87-010-184-080

87-010-197-080

87-010-374-080

CAP, ELECT 47-10V

CAP, ELECT 1-50V

CHIP CAPACITOR 3300P(K)

CAP, CHIP 0.01 DM

CAP, ELECT 47-10V

FRONT C.B

C601

C602

C603

C604

C605

87-010-313-080

87-010-315-080

87-010-319-080

87-010-312-080

87-010-317-080

CAP, CHIP 18P

C-CAP,S 27P-50 CH

C-CAP,S 56P-50 CH

C-CAP,S 15P-50 CH

C-CAP,S 39P-50 CH

C437

C438

C439

C440

C441

87-010-404-080

87-016-669-080

87-010-178-080

87-010-145-080

87-010-197-080

CAP, ELECT 4.7-50V

C-CAP,S 0.1-25 K B

CHIP CAP 1000P

C-CAP, S 1P-50 C CH

CAP, CHIP 0.01 DM

C607

C608

C610

C611

C612

87-010-196-080

87-010-555-040

87-010-196-080

87-A10-189-040

CHIP CAPACITOR,0.1-25

CAP,E 100-10 GAS

CHIP CAPACITOR,0.1-25

CAP,E 220-10

C442

C445

C446

C447

C448

87-010-312-080

87-012-368-080

87-010-315-080

C-CAP,S 15P-50 CH

C-CAP,S 0.1-50 F

C-CAP,S 27P-50 CH

C613

C614

C615

C616

C620

87-010-495-040

87-010-196-080

87-010-493-040

87-010-494-040

87-015-785-080

CAP,E 2.2-50 GAS

CHIP CAPACITOR,0.1-25

CAP,E 0.47-50 GAS

CAP,E 1-50 GAS

C450

C451

C455

C457

C458

87-012-140-080

87-012-156-080

87-010-247-080

87-010-312-080

CAP 470P

C-CAP,S 220P-50 CH

CAP, ELECT 100-50V

C-CAP,S 15P-50 CH

CHIP CAPACITOR, 0.1FZ-25Z

C625

C627

C629

C630

C631

87-A12-317-080

87-010-196-080

87-A12-317-080

C-CAP,U 0.1-50 Z F

CHIP CAPACITOR,0.1-25

C-CAP,U 0.1-50 Z F

C459

C460

C461

C462

C463

87-010-263-080

87-015-819-080

87-010-197-080

87-010-248-080

87-010-197-080

CAP, ELECT 100-10V

CAPACITOR,0.01

CAP, CHIP 0.01 DM

CAP, ELECT 220-10V

CAP, CHIP 0.01 DM

C632

C633

C635

C636

C637

87-A12-317-080

87-012-195-080

C-CAP,U 0.1-50 Z F

C-CAP,S 100P-50 J CH

C465

C466

C467

C469

C470

87-010-404-080

87-012-368-080

87-010-263-080

87-012-154-080

87-010-544-080

CAP, ELECT 4.7-50V

C-CAP,S 0.1-50 F

CAP, ELECT 100-10V

C-CAP,S 150P-50 CH

CAP, ELECT 0.1-50V

C638

C639

C640

C641

C642

87-012-195-080

C-CAP,S 100P-50 J CH

C471

C472

C473

C474

C475

87-015-785-080

87-010-197-080

CHIP CAPACITOR, 0.1FZ-25Z

CAP, CHIP 0.01 DM

C643

C644

C645

C646

C647

87-012-195-080

C-CAP,S 100P-50 J CH

C476

C477

C478

C479

C480

87-010-236-080

87-010-197-080

87-010-263-080

87-010-197-080

87-010-221-080

CAP,E 1000-10 SME

CAP, CHIP 0.01 DM

CAP, ELECT 100-10V

CAP, CHIP 0.01 DM

CAP, ELECT 470-10V

C648

C649

C650

C651

C652

87-012-195-080

C-CAP,S 100P-50 J CH

C481

C482

C489

C490

C491

87-010-405-080

87-012-368-080

87-010-197-080

CAP, ELECT 10-50V

C-CAP,S 0.1-50 F

CAP, CHIP 0.01 DM

C653

C654

C655

C656

C657

87-012-195-080

C-CAP,S 100P-50 J CH

C492

C494

C495

C501

C502

87-010-221-080

87-010-197-080

87-016-669-080

87-012-368-080

87-010-322-080

CAP, ELECT 470-10V

CAP, CHIP 0.01 DM

C-CAP,S 0.1-25 K B

C-CAP,S 0.1-50 F

C-CAP,S 100P-50 CH

C658

CN601

87-A12-317-080

87-099-033-010

C-CAP,U 0.1-50 Z F

CONN,16P 6216 H

Download from Www.Somanuals.com. All Manuals Search And Download.

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

CN602

CNA603

CNA604

L601

87-099-201-010

8A-CD9-624-010

8A-CD9-623-010

87-003-102-080

8Z-CH4-635-010

CONN,8P 6216 H

C43

C44

C45

C46

C47

87-012-349-080

87-010-311-080

87-010-312-080

87-010-197-080

C-CAP,S 1000P-50 CH

CAP 12P

C-CAP,S 15P-50 CH

CAP, CHIP 0.01 DM

CONN ASSY,4P TU-FR

CONN ASSY,4P KEY

COIL, 10UH

LCD601

LCD,HLC7365 ZCH-4

LED602

LED603

LED604

LED606

LED607

88-CD6-630-010

LED,934ID RED

C48

C49

C50

C51

C52

87-010-197-080

87-012-140-080

87-010-197-080

87-010-316-080

87-010-197-080

CAP, CHIP 0.01 DM

CAP 470P

CAP, CHIP 0.01 DM

C-CAP,S 33P-50 CH

CAP, CHIP 0.01 DM

LED608

LED610

S601

88-CD6-630-010

88-CD6-631-010

87-A90-164-080

LED,934ID RED

C53

C54

87-010-197-080

87-014-055-080

CAP, CHIP 0.01 DM

LED,934GD GRN

CAP,PP 820P-100 J<51 K<S>,51

SW,TACT SKQAB(N)

EZ<S>>

S604

C55

C71

C72

87-010-197-080

87-010-263-080

CAP, CHIP 0.01 DM

CAP, ELECT 100-10V

S605

S606

S607

S611

S613

S614

87-A91-704-080

87-A90-164-080

87-A91-704-080

SW,TACT EVQ 214 05R

SW,TACT SKQAB(N)

C73

C75

C91

C92

C93

87-010-197-080

87-012-140-080

87-010-197-080

CAP, CHIP 0.01 DM

CAP 470P

CAP, CHIP 0.01 DM

SW,TACT SKQAB(N)

SW,TACT EVQ 214 05R

S615

X601

X602

87-A91-704-080

87-030-273-010

87-030-376-080

SW,TACT EVQ 214 05R

VIB,XTAL 32.768K5PPM

VIB,CER CSA5.76MG200

CF1

CF2

CF3

CN2

CN3

87-A91-094-010

87-008-261-010

87-099-854-010

87-A60-110-010

FLTR,CDA10.7 MG80A

FILTER, SFE10.7MA5-A

CONN,6P S2M-6W

TUNER C.B

CONN,4P V S2M-4W

87-010-314-080

87-010-316-080

87-010-314-080

87-A11-067-080

87-010-313-080

C-CAP,S 22P-50V

CN605

HD1

HD2

87-A60-113-010

88-CD6-661-010

87-A50-560-010

8A-CH4-670-010

CONN,2P H S2M-2WR

HLDR,BAR ANT.

C-CAP,S 33P-50 CH

C-CAP,S 22P-50V

HLDR,BAR ANT.

C-CAP,S 1-10 K B

COIL,FM BPF(ACD)

BAR-ANT,MW 2B-ACH(COI)<51 U<S>,53

U<L>,52 U<W>>

CAP, CHIP 18P<51 U<S>,53 U<L>,52

U<W>>

87-014-049-080

87-012-349-080

87-010-197-080

CAP,PP 470P-100 J

C-CAP,S 1000P-50 CH

CAP, CHIP 0.01 DM

8A-CH4-671-010

BAR-ANT,MW/LW 3B-ACH(COI)<51

K<S>,51 EZ<S>>

C10

C11

C12

87-A50-420-010

87-A50-566-010

87-A50-567-010

87-A91-308-010

COIL,MW OSC(SYN)

COIL,FM RF EX(ACH)

COIL,FM OSC(ACH)

FLTR,PCFAZH- 450T (TOK)

C13

C14

C15

C16

C17

87-010-150-080

87-010-303-080

87-012-349-080

87-010-374-080

87-010-198-080

C-CAP,S 6P-50 CH

C-CAP,S 330P-50CH

C-CAP,S 1000P-50 CH

CAP, ELECT 47-10V

CAP, CHIP 0.022

87-005-849-080

87-A50-421-010

COIL,10UH(CECS)

COIL,LW OSC(SYN)<51 K<S>,51

EZ<S>>

L51

LED601

LED609

TC1

88-CD6-630-010

87-011-254-080

LED,934ID RED

TRIMER,20P LAR

C18

C19

C20

C21

C22

87-015-835-080

87-010-263-080

87-010-404-080

87-010-197-080

C-CAP,0.047 D

CAP, ELECT 100-10V

CAP, ELECT 4.7-50V

CAP, CHIP 0.01 DM

TC51

87-A91-659-010

87-A70-061-010

TRIMMER,50P 4.0X4.5 ECRL<51

K<S>,51 EZ<S>>

VIB,XTAL 4.500MHZ CSA-309

C23

C24

C25

C27

C28

87-010-197-080

87-015-770-080

87-016-460-080

87-A11-067-080

87-016-669-080

CAP, CHIP 0.01 DM

C-CHIP,330P(SL)K

C-CAP,S 0.22-16 B

C-CAP,S 1-10 K B

C-CAP,S 0.1-25 K B

H.P. CB

CN101

CN102

HP1

8A-CD9-628-010

87-A60-685-010

87-A60-569-010

CONN ASSY,3P MA-HP

CONN,4P H WHT EH

JACK,HTJ-035-18

C29

C30

87-016-669-080

87-010-213-080

C-CAP,S 0.1-25 K B

C-CAP,S 0.015-50 B<51 K<S>,51

EZ<S>>

BATT1 C.B

C30

C31

87-010-198-080

87-010-213-080

87-010-198-080

CAP, CHIP 0.022<51 U<S>,53

U<L>,52 U<W>>

C-CAP,S 0.015-50 B<51 K<S>,51

EZ<S>>

CAP, CHIP 0.022<51 U<S>,53

U<L>,52 U<W>>

C901

C902

C903

C904

CNA901

87-010-192-080

8A-CD9-627-010

C-CAP,S 0.022-50 F

CONN ASSY,3P PWR

C33

C34

C35

C36

C37

87-012-358-080

87-015-819-080

87-010-263-080

87-010-197-080

C-CAP,S 0.47-10 F Z

CAPACITOR,0.01

CAP, ELECT 100-10V

CAP, CHIP 0.01 DM

PR901

87-A90-092-080

PROTECTOR,2.5A 491<51 K<S>,51

EZ<S>>

SP901

SP902

87-CD6-213-010

SPR-C,BATT (-)

C38

C39

C40

C41

C42

87-010-374-080

87-010-404-080

87-010-197-080

87-012-349-080

CAP, ELECT 47-10V

CAP, ELECT 4.7-50V

CAP, CHIP 0.01 DM

C-CAP,S 1000P-50 CH

BATT2 C.B

SP903

SP904

87-CD6-213-010

SPR-C,BATT (-)

Download from Www.Somanuals.com. All Manuals Search And Download.

LCD DISPLAY

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

MOTOR C.B

PIN3

SW1

9X-262-576-910

91-564-722-110

91-572-085-120

MOTOR GEAR ASSY

CONNECTOR 6P

LEAF SW

KEY C.B

S608

S609

S610

87-A91-704-080

87-A90-164-080

SW,TACT EVQ 214 05R

SW,TACT SKQAB(N)

•

Regarding connectors, they are not stocked as they are not the initial order items.

The connectors are available after they are supplied from connector manufacturers upon the order is received.

CHIP RESISTOR PART CODE

Chip Resistor Part Coding

8 8

Figure

Resistor Code

Value of resistor

Chip resistor

Dimensions (mm)

: A

Symbol

Wattage

1/16W

1/10W

Type

1005

1608

2125

Tolerance

Resistor Code

104

Form

1.0

0.5 0.35

1.6

0.8 0.45

1.25 0.45

1.6 0.55

108

118

128

3.2

1/8W

3216

TRANSISTOR ILLUSTRATION

E C B

2SA1296 2SC1815

2SC2001

2SA933

2SA1318

2SC1740

DTC114TS

DTC124XS

BCE

2SA1162

2SK302

2SB1370

2SC2712

2SC2714

DTA114YK

DTC114TK

DTC114YK

DTC124XK

DTC144TK

Download from Www.Somanuals.com. All Manuals Search And Download.

WIRING-1 (MAIN/CD)

Download from Www.Somanuals.com. All Manuals Search And Download.

SCHEMATIC DIAGRAM-1 (MAIN)

NM : NO MOUNTED

Download from Www.Somanuals.com. All Manuals Search And Download.

SCHEMATIC DIAGRAM-2 (CD)

Download from Www.Somanuals.com. All Manuals Search And Download.

WIRING-2 (MOTOR)

IC BLOCK DIAGRAM

IC, LC7212M

IC, LA6541D

H MOTOR C.B

IC, TA2149N

(SLED MOTOR)

IC, M61509FP

SW1

(INSIDE LIMIT SW)

mono. SW

(SPINDLE MOTOR)

SW1

Control logic

IC, BA4560N

Download from Www.Somanuals.com. All Manuals Search And Download.

WIRING-3 (FRONT/HP/BATT1/BATT2/KEY)

F BATT1 C.B

G BATT2 C.B

(INSERTED PARTS)

E HP C.B

(INSERTED PARTS)

SPEAKER

EZ,K

MODEL

U MODEL

SP902

SP901

SP904

SP903

DRY BATTERY

R14x8

HP1

PHONES

DC 12V

CD C.B

CN301

CD C.B

PT901

CN202

TO A MAIN C.B TO B CD C.B (2/2)

CN201

CN403

U:AC 120V 60Hz

EZ,K:AC 230V 50Hz

C FRONT C.B

(INSERTED PARTS)

(CHIP PARTS)

I KEY C.B

(INSERTED PARTS)

(CHIP PARTS)

S609

BAND

RADIO

S613

3 MODE

EQUALIZER

TO D TUNER C.B

CN003

S608

S610

POWER

STANDBY

TAPE

S611

QSOUND

NOTE

Rxxx

LED608

STANDBY

OPE/BATT

S601

FM MODE

/OSC

S615

EZ,K MODEL

U MODEL

LED610

QSOUND

VOLUME

S614

PLAY/PAUSE

EXCEPT

U LC

S607

S606

S605

PLAY/PAUSE/PRESET

SKIP/SEARCH

TUNING

S604

STOP/MEMORY

ROCK POP JAZZ RADIO CD

Download from Www.Somanuals.com. All Manuals Search And Download.

SCHEMATIC DIAGRAM-3 (FRONT/KEY)

C FRONT C.B

HLC7365 ZCH-4

(DISPLAY)

C657-635

100P

L-934ND

R637

100K

C630

0.1

R636

COM3

C631

0.1

C629

0.1

R635

L-934ND

R657 1K

O-H.DUBB

-5907

SYSTEM CONTROL

L-934ID

RADIO

R653 100

R638

C633

0.1

C632

0.1

R639

L604 1µH

C634

0.1

L605

1µH

L602

4.7µH

L-934GD

L-934ID

R654

R655 100

STANDBY

OPE/BATT

Q605-610

LED DRIVER

C625 0.1

C627 0.1

O-QSOUND

AC 12V

I KEY C.B

R656

5.76

MHz

32.768

MHz

L603

1µH

RESET

HOLD

FM MODE/OSC

1SS133

3 MODE EQUALIZER

VOLUME

1SS133

VOLUME

1SS133

Download from Www.Somanuals.com. All Manuals Search And Download.

SCHEMATIC DIAGRAM-4 (TUNER U)

Download from Www.Somanuals.com. All Manuals Search And Download.

WIRING-4 (TUNER: U)

Download from Www.Somanuals.com. All Manuals Search And Download.

WIRING-5 (TUNER: EZ, K)

Download from Www.Somanuals.com. All Manuals Search And Download.

SCHEMATIC DIAGRAM-5 (TUNER EZ/K)

Download from Www.Somanuals.com. All Manuals Search And Download.

ELECTRICAL ADJUSTMENT

< TUNER SECTION >

1. FM VT Adjustment

D TUNER C.B

567

12. Bias frequncy Adjustment

Settings : • Test point : TP2 (VT)

• Adjustment location :

L801..................................................................85kHz±0.5kHz

L003 (MW BAR ANT)

L006

Method : Set to FM 108.0MHz and adjust L006 so that the

test point voltage becomes 6.0V ± 0.05V.

< CD SECTION >

TC001

13. FE Balance Adjustment

L004

L051

123

Settings : • Test point : IC401 PIN58 (VR), IC401 PIN 20

(FE)

• Adjustment location : SFR430

Method : Playback the disc and adjust SFR430 so that the

test point voltage becomes 0V.

2. MW VT Adjustment

Settings : • Test point : TP2 (VT)

• Adjustment location :

L004

TP2(VT)

TC051

L005

Method : Set to MW 1000kHz (U), MW 999kHz (EZ,K)

and adjust L004 so that the test point voltage

becomes 3.75V ± 0.05V.

L006

C039

TP1(DET)

3. LW VT Adjustment <EZ,K>

Settings : • Test point : TP2 (VT)

IC002

PRACTICAL SERVICE FIGURE

IC001

L007

• Adjustment location :

L051

< TUNER SECTION >

< FM SECTION >

Method : Set to LW 288kHz and adjust L051 so that the

test point voltage becomes 4.5V ± 0.05V.

Sensitivity:

(THD 3%)

Less than 18dB (87.5MHz)

Less than 18dB (98.0MHz)

Less than 18dB (108.0MHz)

More than 66dB (at 98.0MHz)

(EXCEPT U)

More than 58dB (at 98.0MHz)

(U)

Less than 3% (at 98.0MHz)

4. FM Tracking Adjustment

L005.........................................................................98.0MHz

Signal to Noise Ratio:

(Input 60dB)

5. MW Tracking Adjustment <U>

L003...........................................................................600kHz

TC001.......................................................................1400kHz

B CD C.B

Distortion:

(Input 60dB)

Intermediate frequency:

Stereo separation:

6. MW Tracking Adjustment <EZ,K>

10.7MHz

More than 20dB

L003...........................................................................603kHz

TC001.......................................................................1404kHz

< AM SECTION >

7. LW Tracking Adjustment <EZ,K>

IC404

Sensitivity:

(S/N 10dB)

Less than 48dB (at 600kHz)

Less than 46dB (at 1000kHz)

Less than 44dB (at 1400kHz)

Less than 3%

L003...........................................................................153kHz

TC051.........................................................................288kHz

SFR430

Distortion:

(Input 74dB)

Intermediate frequency:

8. AM IF Adjustment <U>

Settings : • Test point : TP1(DET)

CN401

450kHz

• Adjustment location :

L007

Method : Adjust L007 so that the output level at 1400kHz

becomes maximum.

< LW SECTION >

Sensitivity:

(S/N 10dB)

Less than 60dB (at 153kHz)

Less than 56dB (at 198kHz)

Less than 52dB (at 288kHz)

Less than 3%

9. AM IF Adjustment <EZ,K>

Settings : • Test point : TP1 (DET)

Distortion:

(Input 80dB)

Intermediate frequency:

IC801

• Adjustment location :

L007

A MAIN C.B

Method : Adjust L007 so that the output level at 1404kHz

becomes maximum.

CN801

L801

450kHz

CN201

< CASSETTE SECTION >

< DECK SECTION >

Tape speed:

Wow & flutter:

Take-up torque:

FF torque:

3000Hz±60Hz

10. Tape Speed Adjustment

Less than 0.3% (JIS RMS)

30-60g-cm (FWD)

55-140g-cm

Settings : • Test tape : TTA–100

• Test point : J251 (PHONES jack)

• Adjustment location : SFR of deck motor

Method : Play back the test tape and adjust SFR so that

the frequency counter reads 3000Hz ± 30Hz.

Rew torque:

S/N ratio:

Distortion:

55-140g-cm

More than 35dB

Less than 3.0% (PB)

Less than 1mV

CASSETTE DECK MOTOR

E H.P. C.B

CASSETTE DECK HEAD

Noise (PB):

11. Head Azimuth Adjustment

Settings : • Test tape : TTA–320

• Test point : J251 (PHONES jack)

• Adjustment location : Azimuth adjustment

screw

(AC/DC, MIN)

More than 45dB

Erasing Ratio (W/FILTER):

PHONES

J251

Method : Play back the 8kHz signal of the test tape and

adjust screw so that the output becomes

maximum.

Download from Www.Somanuals.com. All Manuals Search And Download.

IC DESCRIPTION

IC, LA9241ML

Pin No.

Pin Name

I/O

Description

Pin to which external pickup photo diode is connected. RF signal is created by adding

with the FIN1 pin signal. FE signal is created by subtracting from the FIN1 pin signal.

Pin to which external pickup photo diode is connected.

Pin to which external pickup photo diode is connected. TE signal is created by

subtracting from the F pin signal.

FIN2

FIN1

Pin to which external pickup photo diode is connected.

DC component of the TE signal is input.

Pin to which external resistor setting the TE signal gain is connected between the TE

pin.

TE-

TE signal output pin.

TES “Track Error Sense” comparator input pin. TE signal is passed through a band-

pass filter then input.

TESI

SCI

Shock detection signal input pin.

Tracking gain time constant setting pin.

TA amplifier output pin.

Pin to which external tracking phase compensation constants are connected between

the TD and VR pins.

TD-

Tracking phase compensation setting pin.

Tracking jump signal (kick pulse) amplitude setting pin.

Tracking control signal output pin.

Focusing control signal output pin.

Pin to which external focusing phase compensation constants are connected between

the FD and FA pins.

FD-

Pin to which external focusing phase compensation constants are connected between

the FD– and FA– pins.

Pin to which external focusing phase compensation constants are connected between

the FA and FE pins.

FA-

FE-

FE signal output pin.

Pin to which external FE signal gain setting resistor is connected between the FE pin.

Analog signal GND.

AGND

—

Signal ended output of the CV+and CV- pin input signal.

Spndle amp input.

SPI

SPG

Pin to which external spindle gain setting resistor in 12 cm mode is connected.

Pin to which external spindle phase compensation constants are connected together

with SPD pin.

SP-

SPD

SLEQ

SLD

Spindle control signal output pin.

Pin to which external sled phase compensation constants are connected.

Sled control signal output pin.

30, 31

32, 33

SL-, SL+

JP-, JP+

TGL

Sled advance signal input pin from microprocessor.

Tracking jump signal input pin from DSP.

Tracking gain control signal input from DSP. Low gain when TGL = H.

Tracking off control signal input pin from DSP. Off when TOFF = H.

TOFF

Download from Www.Somanuals.com. All Manuals Search And Download.

Pin No.

Pin Name

I/O

Description

Pin from which TES signal is output to DSP.

TES

“High Frequency Level” is used to judge whether the main beam position is on top of

bit or on top of mirror.

HFL

39, 40

SLOF

CV–, CV+

RFSM

Sled servo off control input pin.

CLV error signal input pin from DSP.

RF output pin.

RF gain setting and EFM signal 3T compensation constant setting pin together with

RFSM pin.

RFS-

SLC

“Slice Level Control” is the output pin which controls the RF signal data slice level by

DSP.

SLI

DGND

FSC

TBC

—

Input pin which control the data slice level by the DSP.

Digital system GND.

Output pin to which external focus search smoothing capacitor is connected.

“Tracking Balance Control” EF balance variable range setting pin.

No connection.

—

DEF

CLK

Disc defect detector output pin.

Reference clock input pin. 4.23 MHz of the DSP is input.

Microprocessor command clock input pin.

Microprocessor command data input pin.

Microprocessor command chip enable input pin.

“Detect RF” RF level detector output.

DAT

DRF

FSS

“Focus Search Select” focus search mode (± search/+ search) select pin.

Servo system and digital system Vcc pin.

Pin to which external bypass capacitor for reference voltage is connected.

Reference voltage output pin.

VCC2

REFI

—

LF2

Disc defect detector time constant setting pin.

Pin to which external capacitor for RF signal peak holding is connected.

Pin to which external capacitor for RF signal bottom holding is connected.

APC circuit output pin.

PH1

BH1

LDD

LDS

VCC1

APC circuit input pin.

—

RF system Vcc pin.

Download from Www.Somanuals.com. All Manuals Search And Download.

IC, LC78622ED

Pin No.

Pin Name

I/O

Description

DEFI

TAI

Defect sense signal (DEF) input pin. (Connect to 0V when not used).

Test signal input pin with built-in pull-down resistor. Be sure to connect to 0V.

Phase comparator output pin to control external VCO.

PDO

—

VVSS

ISET

GND pin for built-in VCO. Be sure to connect to 0V.

For PLL.

Pin to which external resistor adjusting the PD0 output current.

VVDD

—

Power supply pin for built-in VCO.

Pin for VCO frequency range adjustment.

VSS

—

Digital system GND. Be sure to connect to 0V.

EFMO

EFMIN

EFM signal output pin.

For slice level control.

12, 13

EFM signal input pin.

Test signal input pin with built-in pull-down resistor. Be sure to connect to 0V.

Disc motor control output. Three level output is possible using command.

Rough servo or phase control automatic selection monitoring output pin. Rough servo

at H. Phase servo at L.

CLV+, CLK-

___

V/P

HFL

TES

Track detect signal input pin. Schmidt input.

Tracking error signal input pin. Schmidt input.

Tracking OFF output pin.

TOFF

TGL

Tracking gain selection output pin. Gain boost at L.

Track jump control signal output pin. Three level output is possible using command.

EFM data playback clock monitoring pin 4.3218 MHz when phase is locked in.

Sync signal detection output pin. H when the sync signal which is detected from EFM

signal and thesync signal which is internally generated agree.

Digital system power supply pin.

19, 20

JP+, JP-

PCK

FSEQ

VDD

SL+

—

Moves the sled to outer circumference.

SL-

Moves the sled to inner circumference.

CONT3 (NC)

Not connected.

PUIN

CD pickup inner switch detection.

_______

EMPH

C2F

Read, wright signal.

De-emphasis monitor output pin. De-emphasis disc is being played back at H.

C2 flag output pin.

DOUT

T3, T4

N.C.

DIGITAL OUT output pin. (EIAJ format).

32, 33

Test signal input pin with built-in pull-down resistor. Be sure to connect to 0V.

Not used. Set the pin to open.

—

MUTEL

LVDD

LCHO

LVSS

RVSS

RCHO

RVDD

MUTER

L-channel mute output pin.

L-channel power supply pin.

L-channel 1-bit DAC.

L-channel output pin.

L-channel GND. Be sure to connect to 0V.

R-channel GND. Be sure to connect to 0V.

R-channel output pin.

R-channel 1-bit DAC.

R-channel power supply pin.

R-channel mute output pin.

Download from Www.Somanuals.com. All Manuals Search And Download.

Pin No.

Pin Name

XVDD

XOUT

XIN

I/O

—

Description

Crystal oscillator power supply pin.

Pin to which external 16.9344 MHz crystal oscillator is connected.

XVSS

SBSY

EFLG

—

Crystal oscillator GND pin. Be sure to connect to 0V.

Subcode block sync signal output pin.

C1, C2, single and dual correction monitoring pin.

Subcode P, Q, R, S, T, U and W output pin.

SFSY

Subcode frame sync signal output pin. Falls down when subcode enters standby.

Subcode read clock input pin. Schmidt input. (Be sure to connected to 0V when not

in use.)

SBCK

FSX

Pin outputting the 7.35 kHz sync signal which is generated by dividing frequency of

crystal oscillator.

WRQ

RWC

Subcode Q output standby output pin.

Read/write control input pin. Schmidt input.

SQOUT

Subcode Q output pin.

COIN

___________

CQCK

Command input pin from microprocessor.

Command input read clock or subcode read input clock from SQOUT pin

LC78622 reset input pin. Set this pin to L once when the main power is turned on.

Test signal output pin. Use this pin as open (normally L output).

16.9344 MHz output pin.

RES

T11

16M

4.2M

4.2336 MHz output pin.

Test signal input pin with built-in pull-down resistor. Be sure to connect to 0V.

Chip select signal input pin with built-in pull-down resistor. Be sure to connect to 0V

while it is not controlling.

______

Test signal input pin without built-in pull-down resistor. Be sure to connect to 0V.

Download from Www.Somanuals.com. All Manuals Search And Download.

IC, LC867132V-5P07

Pin No.

Pin Name

O-RMC/CE

O-DATA

O-CLK

I/O

Description

CD read/write control output and TU CE.

Pin No.

51-54

Pin Name

S20- S23

I/O

—

Description

Not connected.

Data output to M62495FP.

Output CLK to tuner PLL.(Not connected)

Not Connected.

O-CD LED

O-TU LED

LED ON/OFF control output for CD functions.

LED ON/OFF control output for TU functions.

LED ON/OFF control output for TAPE functions. (Not Connected)

LED ON/OFF control output for ROCK.

LED ON/OFF control output for POP.

LED ON/OFF control output for JAZZ.

Not connected.

—

O-CLK SFT

I-HOLD

RST

—

64-66

O-TA LED

O-ROCK LED

O-POP LED

O-JAZZ LED

—

Clock shift output of the microcomputer.

Hold status detection.

Microcomputer reset.

XT1 (IN)

XT2 (OUT)

VSS1

Connected to 32.768KHZ crystal oscillator.

—

I-CD TEST

I-TU TEST

COM0-COM2

—

Not connected.

37-40

43, 44

45-50

GND.

Not connected.

CF1 (IN)

CF2 (OUT)

VDD1

LCD common output.

Connected to 6MHZ Ceramic Filter.

—

Not connected.

Power supply for microcomputer (+5V).

FM STEREO status input.

VSS2

GND.

I-ST IND

I-KEYO

I-CD SW

I-KEY1

I-MOTOR

I-REC

VDD2

Power supply for microcomputer (+5V).

CD PWR control output.

KEY AD input.

O-CD ON

O-TU ON

CD DOOR SW status detection input.

KEY AD input.

TU PWR control output.

O-P.CONT

___________________

O-H.DUBB

Power supply control output.

Dubbing speed control output.

Main mute output.

DECK MECHA MOTOR status input.

REC status input.

O-MUTE

O-MO/ST

I-FM/AM

I-TU DO

O-BASS LED

O-QS LED

O-DUBB LED

O-INT

FM, AM status input. (Not connected)

Data input from tuner PLL.(Not connected)

BASS LED ON/OFF control output.

Q-Sound LED ON/OFF control output.

LED control output used for high-speed dubbing.

INT DIODE MATRIX detection output.(Not connected)

CD RF level detection input.

CD sub-code Q standby input.

Remote control input.

FM mono/stereo output.

O-BEAT CONT

O-QSOUND

O-COIN

BEAT switch over output.

Q-Sound ON/OFF output.

CD command output.

I-SQOUT

CD sub-code Q input.

O-CQCK

CLK for CD commands/sub-codes.

I-DRF

I-WRQ

I-REMO

S0/PA0

—

LCD segment output.

S1/PA1

LCD segment output.

S2/PA2

LCD segment output.

S3/PA3

LCD segment output.

S4/PA4

LCD segment output.

S5/PA5

LCD segment output.

S6/PA6

LCD segment output.

S7/PA7

LCD segment output.

S8~S11

VDD3

Power supply for microcomputer (+5V).

GND.

VSS3

S12, S13

S14- S19

LCD segment output.

Download from Www.Somanuals.com. All Manuals Search And Download.

MECHANICAL EXPLODED VIEW 1/1

P. C. B

LCD

P. C. B

CUSHION,

CD A

SHIELD

PLATE

CUSHION,

CD A

RUBBER FOOT

P. C. B

GRILLE, SPKR L

CHAS,TU B

TN-21ZVC-2000

HT-SINK

P. C. B

CHAS,TU A

P. C. B

BAR, ANT

WIRE, FASTON ASSY ANT

GRILLE, SPKR R

CABI, FR U

Download from Www.Somanuals.com. All Manuals Search And Download.

MECHANICAL PARTS LIST 1/1

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

1 8Z-CL7-107-010

2 8A-CD8-007-010

BADGE,AIWA SILVER

32 8A-CH8-037-010

32 8A-CH8-018-010

32 8A-CD8-027-010

33 8A-CH8-038-010

33 8A-CH8-019-010

BOX,CD (L)<53 U<L>>

WINDOW,CASS<EXCEPT 53 U<L>,52

BOX,CD (W)<52 U<W>>

U<W>>

BOX,CD EX<EXCEPT 53 U<L>,52 U<W>>

CHAS,CD (L)<53 U<L>>

CHAS,CD (W)<52 U<W>>

2 8A-CH8-040-010

2 8A-CH8-021-010

3 8A-CD8-006-010

WINDOW,CASS (L)<53 U<L>>

WINDOW,CASS (W)<52 U<W>>

BOX,CASS<EXCEPT 53 U<L>,52 U<W>>

33 8A-CD8-028-010

CHAS,CD EX<EXCEPT 53 U<L>,52

U<W>>

HANDL,FR<EXCEPT 53 U<L>,52 U<W>>

HANDL,FR (L)<53 U<L>>

HANDL,FR (W)<52 U<W>>

SW,PUSH LOCK

3 8A-CH8-039-010

3 8A-CH8-020-010

4 8A-CD8-207-010

5 8A-CD8-209-010

6 8A-CD8-018-010

BOX,CASS (L)<53 U<L>>

BOX,CASS (W)<52 U<W>>

SPR-T,CASS

HLDR,TRANS

PANEL,FR L<EXCEPT 53 U<L>,52

34 8A-CD8-008-010

34 8A-CH8-041-010

34 8A-CH8-022-010

35 87-036-389-010

U<W>>

36 8A-CD8-009-010

HANDL,REAR<EXCEPT 53 U<L>,52

U<W>>

6 8A-CH8-048-010

6 8A-CH8-029-010

7 8A-CH8-014-010

7 8A-CH8-003-010

PANEL,FR L (L)<53 U<L>>

PANEL,FR L (W)<52 U<W>>

WINDOW,LCD EX<51 K<S>,51 EZ<S>>

WINDOW,LCD U<51 U<S>,53 U<L>,52

36 8A-CH8-023-010

37 8A-CD8-208-010

38 84-CD5-216-010

39 8A-CD8-603-010

HANDL,REAR (W)<52 U<W>>

SPR-T,CD

BRACKET

U<W>>

PT,E 2.5W<51 K<S>,51 EZ<S>>

8 88-CD8-622-010

SPKR,F 77 7OHM 3W

39 8A-CD8-602-010

PT,U 2.5W<51 U<S>,53 U<L>,52

U<W>>

CONN ASSY,4P RPH

9 8A-CD8-210-010

10 8A-CD8-211-010

11 84-CD5-215-010

12 8A-CD8-021-010

12 8A-CH8-047-010

HLDR,SPKR A

HLDR,SPKR B

40 8A-CD9-630-010

41 87-A60-178-010

41 87-A60-177-010

GEAR

JACK,AC E W/SW<51 K<S>,51 EZ<S>>

JACK,AC U W/SW<51 U<S>,53 U<L>,52

U<W>>

CHAS,CASS<EXCEPT 53 U<L>,52 U<W>>

CHAS,CASS (L)<53 U<L>>

42 87-A90-086-010

COVER,AC-SOCKET

12 8A-CH8-031-010

13 8A-CD9-633-010

14 8A-CD9-626-010

15 8A-CD8-022-010

CHAS,CASS (W)<52 U<W>>

CONN ASSY,4P SP

43 88-CD8-209-010

44 8A-CD8-212-010

45 8A-CD9-620-010

46 8A-CD8-003-010

46 8A-CH8-036-010

SPR-C,BATT

HLDR,ANT

FF-CABLE, 16P FR-MAIN

LID,BATT<EXCEPT 53 U<L>,52 U<W>>

LID,BATT (L)<53 U<L>>

CONN ASSY,2P DOOR

PANEL,FR R<EXCEPT 53 U<L>,52

U<W>>

15 8A-CH8-049-010

PANEL,FR R (L)<53 U<L>>

15 8A-CH8-030-010

16 8A-CH8-005-010

PANEL,FR R (W)<52 U<W>>

KEY,CONTROL CD<EXCEPT 53 U<L>,52

U<W>>

KEY,CONTROL CD (L)<53 U<L>>

KEY,CONTROL CD (W)<52 U<W>>

KEY,VOL<EXCEPT 53 U<L>,52 U<W>>

46 8A-CH8-017-010

47 8A-CH8-002-010

47 8A-CH8-035-010

47 8A-CH8-016-010

48 8Z-CH4-640-010

LID,BATT (W)<52 U<W>>

CABI,REAR<EXCEPT 53 U<L>,52 U<W>>

CABI,REAR (L)<53 U<L>>

CABI,REAR U (W)<52 U<W>>

ANT,ROD

16 8A-CH8-046-010

16 8A-CH8-027-010

17 8A-CD8-014-010

49 8A-CD9-631-010

A 87-B10-242-010

B 87-641-096-410

C 87-254-097-410

D 87-741-095-410

CONN ASSY,4P TP-ME

UT2+3-30 W/O CR

UT1+3-10 GLD

U+3-12 CR

17 8A-CH8-044-010

17 8A-CH8-025-010

18 8A-CD8-017-010

19 8A-CH8-201-010

20 8A-CH8-004-010

KEY,VOL (L)<53 U<L>>

KEY,VOL (W)<52 U<W>>

KEY,QSOUND

HLDR,LCD

UT2+3-8 GLD

KEY,FUNC<EXCEPT 53 U<L>,52 U<W>>

E 87-342-074-010

F 87-353-076-210

G 87-571-032-410

H 87-WA5-253-010

I 87-751-094-410

UT2+2.6-8

VT2+2.6-12

VIT+2-3

W,3.3-10-0.8

VT2+3-6 W10SL0T

20 8A-CH8-045-010

20 8A-CH8-026-010

21 8A-CH8-043-010

21 8A-CH8-024-010

21 8A-CD8-011-010

KEY,FUNC (L)<53 U<L>>

KEY,FUNC (W)<52 U<W>>

KEY,CASS (L)<53 U<L>>

KEY,CASS (W)<52 U<W>>

KEY,CASS SET<EXCEPT 53 U<L>,52

U<W>>

J 87-661-097-410

k 87-067-566-010

TAPPING SCREW, VFT1+3-12

TAPPING SCREW, VFTT+3-6

22 8A-CD8-213-010

23 M8-ZZK-E90-070

24 8A-CD9-622-010

25 8A-CD9-621-010

26 8Z-CDB-169-010

SPR-P,REC

DA11T3C

FF-CABLE, 8P CD-FR

FF-CABLE, 16P CD-RF

PANEL,CD SANYO

27 88-CD9-211-210

28 8Z-CDB-170-010

29 87-036-368-010

30 84-CT5-209-010

31 8Z-CH4-225-110

RING,CHUCK

BASE,CHUCK

MAGNET

PLATE,MAGNET

HLDR,CHUCK A(S)

COLOR NAME TABLE

Basic color symbol

Color

Black

Basic color symbol

Color

Basic color symbol

Color

Orange

Cream

Green

Gray

Blue

Transparent Blue

Red

Gold

Pink

Silver

Titan Silver

White

Brown

Violet

Transparent White

Metallic Blue

Dark Blue

Yellow

Transparent Yellow

Transparent Green

Light Blue

Transparent Orange

Download from Www.Somanuals.com. All Manuals Search And Download.

TAPE MECHANISM EXPLODED VIEW 1/1

LUG PLATE

Download from Www.Somanuals.com. All Manuals Search And Download.

TAPE MECHANISM PARTS LIST 1/1

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

36 S1-921-140-030

37 S1-921-140-170

38 S1-921-073-040

39 S1-921-070-030

40 S1-921-260-020

REC BUTTON LEVER

P.S.LEVER SPRING

RF CLUTCH ASSY

RF BELT

1 S1-921-030-4A0

2 S1-821-030-070

3 S1-921-030-090

4 S1-921-260-050

5 S1-921-265-020

HEAD BASE

AZIMUTH SPRING

PANEL P SPRING

GEAR PLATE SPRING

GEAR PLATE ASSY

CAM GEAR

41 S1-921-140-160

42 S1-921-093-210

43 S1-921-090-380

44 S1-921-120-590

45 S6-002-030-220

E ACTUATOR SPRING

FLYWHEEL ASSY

MAIN BELT

6 S1-510-020-020

7 S1-921-015-010

8 S1-921-030-110

9 S1-921-143-160

10 S1-921-141-8A0

REC SPRING PLATE

CHASSIS ASSY

HEAD PANEL

MOTOR PULLEY

BASE ASSY

MOTOR EG530AD-2B

M CONTROL SPRING

46 S6-209-100-100

47 S1-921-030-050

48 S1-921-140-210

49 S1-821-100-690

50 S1-821-128-9A0

E HEAD PH-K380-MS1

MG ARM

REC BUTTON LEVER SPRING

RECORD SAFETY LEVER

MOTOR BRACKET

11 S1-921-260-4A0

12 S1-921-043-100

13 S1-921-130-010

14 S1-921-141-3A0

15 S1-921-140-550

SENSING LEVER

PINCH ROLLER ARM ASSY

EJECT SLIDE LEVER

P CONTROL SPRING

PAUSE LEVER(E)

51 S1-821-010-500

52 S6-201-011-110

A S9-P04-200-310

B S1-921-120-020

C S9-B10-200-510

PLAY BUTTON LEVER SPRING

HEAD,RP7442ES-0951

16 S1-921-140-120

17 S1-921-140-110

18 S1-921-140-150

19 S1-821-011-590

20 S1-921-141-070

PAUSE LEVER SPRING

PAUSE STOPPER

BUTTON LEVER SPRING(B)

E KICK LEVER

BUTTON LEVER SPRING(A)

C TAPPING SCREW 2-3

MOTOR COLLER SCREW

P TAPPING BIND SCREW M2-5

D S9-C07-204-510

E S9-P01-200-610

F S9-B01-200-310

G S9-F08-200-710

H S1-921-120-030

SCREW,TAPPING(CAMERA)M2-4.5

SCREW,M2-6

(+)BIND SCREW M2-3

AZIMUTH SCREW M2-7

MB SCREW

21 S6-401-011-490

22 S1-921-140-090

23 S1-921-140-080

24 S1-921-140-190

25 S1-921-030-100

LEAF SW MSW-1541T

SWITCH ACTUATOR

PUSH BUTTON ACTUATOR

PLAY BUTTON LEVER

MG ARM SPRING

I S9-W02-300-100

J S9-W02-500-100

K S9-W01-400-100

L S9-W01-130-200

P WASHER CUT 1.2-3.8-0.3

P WASHER CUT 1.45-3.8-0.5

P WASHER 2-3.5-0.4

26 S1-921-140-040

27 S1-921-140-050

28 S1-921-140-060

29 S1-921-140-600

30 S1-821-100-700

REW BUTTON LEVER

FF,BUTTON REVER

STOP BUTTON LEVER

PAUSE BUTTON LEVER

FF GEAR

P WASHER 2.1-4-0.13

31 S1-921-050-060

32 S1-921-053-100

33 S1-829-100-010

34 S1-921-050-150

35 S1-921-050-220

SENSER

TAKE UP REEL ASSY

PACK SPRING

S REEL HUB

BACK TENSION SPRING

Download from Www.Somanuals.com. All Manuals Search And Download.

CD MECHANISM EXPLODED VIEW 1/1

SHAFT,SLIDE

SF-P101NR

CHASSIS

SPINDLE

MOTOR(M3)

MOTOR C,B

Download from Www.Somanuals.com. All Manuals Search And Download.

CD MECHANISM PARTS LIST 1/1

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

1 S2-121-A28-400

2 S2-511-A21-000

3 S2-511-A21-100

A S1-PN2-03R-OSE

B 87-261-073-410

COVER GEAR

GEAR MIDDLE

GEAR,DRIVE

SCR PAN PCS 2-3

SCR S-TPG FLT 2.6-6

ALL M8-ZZK-E90-070

DA11T3C

ACCESSORIES/PACKAGE LIST

REF. NO

PART NO.

KANRI

NO.

DESCRIPTION

1 8A-CH8-906-010

1 8A-CH8-905-010

1 8A-CH8-903-010

IB,EZ(9L)B<51 EZ<S>>

IB,K(E)B<51 K<S>>

IB,U(ESF)B<51 U<S>,53 U<L>,52 U

<W>>

2 87-A80-036-010

2 87-A80-034-010

AC CORD SET ASSY,E W/FLTR VOL<51

EZ<S>>

AC CORD SET ASSY,K W/F MAY-BG<51

K<S>>

2 87-A80-109-010

AC CORD,HK7281 BLK U<51 U<S>,53

U<L>,52 U<W>>

Download from Www.Somanuals.com. All Manuals Search And Download.

2–11, IKENOHATA 1–CHOME, TAITO-KU, TOKYO 110, JAPAN TEL:03 (3827) 3111

931196

Printed in Singapore

Download from Www.Somanuals.com. All Manuals Search And Download.

Acnodes Computer Monitor APH 9220 User Manual
Addonics Technologies Computer Drive AD5PUSBA User Manual
ADIC Tool Storage Version 27 User Manual
AEG Dishwasher 88009 User Manual
Alpine Battery Charger 500CHA1214 User Manual
Altinex Switch SW1956CT User Manual
Audiovox Car Stereo System AVDINPC User Manual
Axis Communications Security Camera M1103 User Manual
Bang Olufsen Speaker 1 Jul User Manual
BC Speakers Portable Speaker DE 45 User Manual