UNO-1170/1170E
Pentium M / Celeron M Fanless,
DIN-rail Mounted Embedded
Automation Computer with 2 x LAN,
3 x COM, 4 x USB, Audio & PC/104+
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its prod-
ucts will be free from defects in materials and workmanship for two years
from the date of purchase.
This warranty does not apply to any products which have been repaired or
altered by persons other than repair personnel authorized by Advantech,
or which have been subject to misuse, abuse, accident or improper instal-
lation. Advantech assumes no liability under the terms of this warranty as
a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous test-
ing, most of our customers never need to use our repair service. If an
Advantech product is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will
be billed according to the cost of replacement materials, service time and
freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1.
Collect all the information about the problem encountered. (For
example, CPU speed, Advantech products used, other hardware
and software used, etc.) Note anything abnormal and list any
onscreen messages you get when the problem occurs.
2.
3.
Call your dealer and describe the problem. Please have your man-
ual, product, and any helpful information readily available.
If your product is diagnosed as defective, obtain an RMA (return
merchandize authorization) number from your dealer. This allows
us to process your return more quickly.
4.
5.
Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for war-
ranty service.
Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
CE
This product has passed the CE test for environmental specifications
when shielded cables are used for external wiring.
FCC Class A
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Technical Support and Assistance
where you can find the latest information about the product.
Step 2. Contact your distributor or Advantech's customer service center
if you need additional assistance. Have the following info ready:
- Product name and serial number
- Description of your software (OS, version, software, etc.)
- A complete description of the problem
- The exact wording of any error messages
Packing List
Before setting up the system, check that the items listed below are
included. If any item is not, please contact your dealer immediately.
• Software Supporting CD-ROM
• 6P-6P-6P 20cm PS/2 Mouse/Keyboard Y cable (P/N: 1700060202)
• Phoenix power connector (P/N: 1652003206)
• DIN-rail & wall mount accessories
• Key pro bracket
• SATA cable (UNO-1170E only)
• SATA power cable (UNO-1170E only)
• Spacer for PCI-104 expansion (UNO-1170E only)
UNO-1170 User Manual
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
1.
2.
3.
Read these safety instructions carefully.
Keep this User's Manual for later reference.
Disconnect this equipment from any AC outlet before cleaning.
Use a damp cloth. Do not use liquid or spray detergents for clean-
ing.
4.
For plug-in equipment, the power outlet socket must be located
near the equipment and must be easily accessible.
5.
6.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Drop-
ping it or letting it fall may cause damage.
7.
8.
9.
The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is correct before con-
necting the equipment to the power outlet.
Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or elec-
trical shock.
13. Never open the equipment. For safety reasons, the equipment
should be opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked
by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the user's manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
WHERE THE STORAGE TEMPERATURE MAY GO BELOW
v
Download from Www.Somanuals.com. All Manuals Search And Download.
-10° C (14° F) OR ABOVE 60° C (140° F). THIS COULD DAM-
AGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A
CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY WITH THE
SAME OR EQUIVALENT TYPE RECOMMENDED BY THE
MANUFACTURER, DISCARD USED BATTERIES ACCORD-
ING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-
1:1982 is no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1.
Advantech disclaims all responsibility for the accuracy of any statements
contained herein.
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the
products from damage.
1.
To avoid electrical shock, always disconnect the power from your
PC chassis before you work on it. Don't touch any components on
the CPU card or other cards while the PC is on.
2.
Disconnect power before making any configuration changes. The
sudden rush of power as you connect a jumper or install a card may
damage sensitive electronic components.
UNO-1170 User Manual
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
vii
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
UNO-1170 User Manual
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
1
UNO-1170 Overview
Sections include:
• Introduction
• Hardware Specifications
• Safety Precautions
• UNO-1170 Series
• Chassis Dimensions
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 UNO-1170 Overview
1.1 Introduction
UNO-1170 is an DIN-rail mounted Embedded Automation Computer, which
provides several serial communication ports and Ethernet interfaces. UNO-
1170 is designed with a compact size, small footprint, and help to saves space
with its front accessible and DIN-rail design. With rich OS and driver support,
such as Windows XP embedded, WinCE 6.0, and even embedded Linux. You
can integrate your applications easily with an application ready platform that
can provide a versatile function to fulfill diverse requirements.
1.2 Hardware Specifications
• CPU: Pentium M 1.4GHZ / Celeron M 1 GHZ
• Memory: 512MB/1GB on board
• Battery-backup RAM: 512 KB Battery-backup RAM
• VGA/Keyboard/Mouse: DB-15 VGA Connector, Mini-DIN connector for
PS/2 keyboard & mouse
• Serial Ports: 2 × RS-232 and 1 x RS-232/422/485 with DB-9 connectors.
Automatic RS-485 data flow control
• Serial Speeds: RS-232: 50~115.2 kbps, RS-422/485: 50~921.6 kbps
• LAN: Two 10/100 Base-T RJ-45 Ports
• USB interface: Four USB ports, USB EHCI, Rev. 2.0 compliant. (Including
3 external connectors and 1 internal connector for USB dongle)
• Audio: Mic in, Line in, Line out
• Storage: SSD: 1 x internal type I/II CompactFlash slot
HDD: one 2.5" SATA HDD bracket (Only for UNO-1170E)
• LEDs: Power (Power Standby: Orange, Power on : Green), 3 pairs of serial
flow indicators (Tx, Rx ), -IDE, Alarm for RAM Backup Battery
• PC/104+: PC/104+ slot, Supports +5V Power (Optional, UNO-1170E only)
• Mini PCI: 1x MiniPCI (UNO-1170E only)
• Shock Protection: IEC 68-2-27, CompactFlash: 50G @ Wall mount, half
sine, 11ms (Optional, for UNO-1170E: 20G @ wall mount, half sine, 11ms)
UNO-1170 User Manual
2
Download from Www.Somanuals.com. All Manuals Search And Download.
• Vibration Protection: IEC 68 2-64 (Random 1 Oct./min, 1hr/axis),
CompactFlash: 2Grms@ 5~500Hz, (Optional, UNO-1170E only)
HDD: 0.5 Grms @ 5~500Hz
• Power Supply Voltage: 10-36 VDC, reversed wiring protection
• Power Requirement: Min. 48 W (10 ~ 53 VDC) (e.g +24 V @ 2 A) (ATX)
• Power Consumption: 24W (Typical)
• Operating Temperature: -20~60° C (-4~149° F)
• Storage Temperature: -20~80° C (-4~176° F)
• Relative humidity: 95% @ 40°C
• Weight: 1.6KG (for UNO-1170) 2.0KG (for UNO-1170E)
• Chassis size (W × L × H): 85x155x140 mm (3.4"x 6.1"x 5.6") (UNO-1170)
110 x 155 x 140 mm (4.4" x 6.1" x 5.6") (UNO-1170E)
• Software options: WinXP Embedded, Win CE, Linux
• Certification: CE, FCC Class A, UL
1.3 Safety Precautions
The following sections tell how to make each connection. In most cases, you
will simply need to connect a standard cable. All of the connector pin assign-
ments are shown in Appendix A.
Warning!! Always disconnect the power cord from your chassis when
you are working on it. Do not connect while the power is
on. A sudden rush of power can damage sensitive elec-
tronic components. Only experienced electronics person-
nel should open the chassis.
Caution!!
Always ground yourself to remove any static electric
charge before touching UNO-1170. Modern electronic
devices are very sensitive to static electric charges. Use a
grounding wrist strap at all times. Place all electronic com-
ponents on a static-dissipative surface or in a static-
shielded bag.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4 UNO-1170 Series
There are four products in UNO-1170 series, as listed below:
UNO-1170 with Intel Celeron M 1.0GHz CPU
and 512MB RAM
UNO-1170-C11E
UNO-1170-P12E
UNO-1170E-C11E
UNO-1170E-P12E
UNO-1170 with Intel Pentium M 1.4GHz CPU
and 1GB RAM
UNO-1170 with Intel Celeron M 1.0GHz CPU,
512MB RAM, and PC/104+ expansion
UNO-1170 with Intel Pentium M 1.4GHz CPU,
1GB RAM and PC/104+ expansion
1.5 Chassis Dimensions
Figure 1.1: UNO-1170 Chassis Dimensions
UNO-1170 User Manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 1.2: UNO-1170E Chassis Dimensions
5
Download from Www.Somanuals.com. All Manuals Search And Download.
UNO-1170 User Manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Hardware
Functionality
Sections include:
•UNO-1170 Peripherals
•COM1: RS-232 Interfaces
•COM2~3: RS-232/422/485 Interfaces
•LAN: Ethernet Connector
•Power Connector
•LED Indicators
•PS/2 Keyboard and Mouse Connector
•Universal Serial Bus Connectors
•VGA: VGA Display Connector
•RESET: Reset Button
•Audio
• PC/104+ Voltage Selection
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Hardware Functionality
2.1 UNO-1170 Peripherals
The following figures show the connectors on UNO-1170. and UNO-
1170E. Information in this chapter is applied to both UNO-1170 and
UNO-1170E. Therefore, in this chapter, we just mention UNO-1150 to
represent the series product. The following sections give you detailed
information about function of each peripheral.
Figure 2.1: UNO-1170 Front View
Figure 2.2: UNO-1170 Top View
UNO-1170 User Manual
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2.3: UNO-1170E Front View
Figure 2.4: UNO-1157E Top View
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 COM1~COM2: RS-232 Interfaces
The UNO-1170 offers two standard RS-232 serial communication inter-
face port on COM1 and COM2. Please refer to A.2 for pin assignments.
2.3 COM3: RS-232/422/485 Interfaces
The UNO-1170 offers two RS-232/422/485 serial communication inter-
face ports, and they are COM2 and COM3. Both port can be configured
individually to either RS-232, RS422/485 by using on-board jumpers.
Please refer to A.3 for pin assignments and Table 2.1 lists the default set-
ting of each port.
Table 2.1: COM3 Default Settings
COM Port
Default Setting
COM3
RS-422/485
2.3.1 TI 16C550 UARTs with 16-byte Standard
Advantech UNO-1170 comes standard with TI 16C550 UARTs contain-
ing 16 bytes FIFOs. These upgraded FIFOs greatly reduce CPU overhead
and are an ideal choice for heavy multitasking environments.
2.3.2 Jumperless RS-422/485
In RS-422/485 mode, UNO-1170 automatically sense signals to match
RS-422 or RS-485 network. No need to change jumpers.
2.3.3 Automatic Data Flow Control Function for RS-485
In RS-485 mode, UNO-1170 automatically senses the direction of incom-
ing data and switches its transmission direction accordingly. Therefore no
handshaking signal (e.g. RTS signal) is necessary. This feature lets you
simply and quickly build an RS-485 network with just two wires. More
importantly, application software previously written for half duplex RS-
232 environments can be maintained without need for modification.
UNO-1170 User Manual
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.4 RS-232/422/485 Selection
COM2 and COM3 support 9-wire RS-232, RS-422 or RS-485 interfaces,
and you can set corresponding jumpers to select serial ports as RS-232 or
RS-422/485 interfaces shown in Table 2.2. Please note to reset the system
to adapt this configuration change
The system detects RS-422 or RS-485 signals automatically in RS-422/
485 mode.
Table 2.2: Selecting RS-232/422/485 (COM2&3)
Serial Port
Corresponding Jumper to Select RS-232/422/485
COM3
CN13
Jumper Setting for RS-422/485 Interface: (Default Setting)
Figure 2.5: RS-422/485 Jumper Settings
Jumper Setting for RS-232 Interfaces:
Figure 2.6: RS-232 Jumper Settings
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.5 Terminal Resistor Setup for RS-422/485
The onboard termination resistor (120 Ohm) for COM2/COM3 can be
used for long distance transmission or device matching. (Default Open.)
Each terminal resistor responds to different channels for RS-422/485.
Usually, these resistors are needed for both ends of the communication
wires and the value of the resistors should match the characteristic imped-
ance of the wires used.
Table 2.3: Terminal Resistor Settings
COM port Switch No. Pin
Setting Description
COM3
SW3
1
ON
120 Ohm between Data+/
Data- (RS-485)
Or 120 Ohm between Tx+/Tx-
(RS-422)
OFF
ON
Open (Default)
2
120 Ohm between Rx+/Rx-
(RS-422)
OFF
Open (Default)
2.3.6 RS-485 Auto Flow & RS-422 Master/Slave Mode
You can set the “Auto Flow Control” mode of RS-485 or “Master/Slave”
mode of RS-422 by using the SW2 DIP switch for each RS-422/485 port.
In RS-485, if the switch is set to “Auto”, the driver automatically senses
the direction of the data flow and switches the direction of transmission.
No handshaking is necessary.
In RS-422, if DIP switch is set to “On,” the driver is always enabled, and
always in high or low status.
UNO-1170 User Manual
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2.4: Auto Flow & Slave/Master Selection
SW2 DIP Switch Setting COM Port Mode Selections
RS-422: Slave mode
COM2
O
N
1
2
RS-485: Auto flow control
RS-422: Slave mode
RS-485: Auto flow control
RS-422: Master mode
RS-485: N/A
COM3
COM2
COM3
COM2
COM3
COM2
COM3
O
N
1
2
RS-422: Slave mode
RS-485: Auto flow control
RS-422: Slave mode
RS-485: Auto flow control
RS-422: Master mode
RS-485: N/A
O
N
1
2
RS-422: Master mode
RS-485: N/A
O
N
1
2
RS-422: Master mode
RS-485: N/A
2.4 LAN: Ethernet Connector
The UNO-1170 is equipped with two Realtek RTL8100CL Ethernet LAN
controllers that are fully compliant with IEEE 802.3u 10/100Base-T
CSMA/CD standards. The Ethernet port provides a standard RJ-45 jack
onboard, and LED indicators on the front side to show its Link (Yellow
LED) and Active (Green LED) status. Please refer to A.4 for its pin
assignments.
2.5 Power Connector
The UNO-1170 comes with a Phoenix connector that carries 10~36 VDC
external power input, and has reversed wiring protection. Therefore, it
will not cause any damage to the system by reversed wiring of ground
line and power line. Please refer to A.5 for its pin assignments.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6 LED Indicators
• There are five kinds of LEDs on the UNO-1170 front panel
• PWR: system power status
• IDE: IDE bus status
• Txn, Rxn: Serial communication status of COM Port n
• DIAG: a programmable LED indicator to show a systems status
• BTR: Replace battery when this LED is active
2.7 PS/2 Keyboard and Mouse Connector
The UNO-1170 provides a PS/2 keyboard and PS/2 mouse connector. A
6-pin mini-DIN connector is located on the rear panel of the UNO-1170.
The UNO-1170 comes with an adapter to convert from the 6-pin mini-
DIN connector to two 6-pin mini-DIN connectors for PS/2 keyboard and
mouse connections. Please refer to Appendix A.6 for pin assignments.
2.8 Universal Serial Bus Connectors
The USB connector is used for connecting any device that conforms to
the USB interface. Many recent digital devices conform to this standard.
The USB interface supports Plug & Play, which enables you to connect or
disconnect a device whenever you want without turning off the computer.
The UNO-1170 provides two connectors with USB interfaces, which
gives complete Plug & Play and hot swapping for up to 127 external
devices. The USB interface complies with USB specification version 1.1
compliant. OpenHCI, Rev. 1.0. The USB interface can be disabled in the
system BIOS setup. Please refer to Appendix A.7 for its pin assignments.
2.9 VGA: VGA Display Connector
The UNO-1170 provides a VGA controller (Intel 855/852 GME, supports
a single 1.5V accelerated graphics port interface) for a high resolution
VGA interface. It supports CRT Mode: 1920 x 1440 @ 32bpp (60Hz),
1600 x 1200 @ 32bpp (85Hz); and up to 64 MB shared memory.
UNO-1170 User Manual
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2.10 RESET: Reset Button
UNO-1170 provides a reset button on the top of the device.
2.11 Audio
UNO-1170 supports audio function with:
- Line In
- Line Out
2.12 Battery Backup SRAM
UNO-1170 provides 512 KB of battery backed SRAM. This ensures that
you have a safe place to store critical data. You can now write software
applications without being concerned that system crashes will erase criti-
cal data from the memory.
There is a BTRY LED in the front panel of the UNO-1170, please replace
the lithium battery with a new one if the BTRY LED is activated.
2.12.1 Lithium Battery Specifications
• Type: BR2032 (Using CR2032 is NOT recommended)
• Output voltage: 3 V
DC
• Location: the backside of UNO-1170 board.
(BH1 is for real time clock, BH2 is for SRAM)
2.13 LED and Buzzer for System Diagnosis
In a “headless application” (an application without a monitor display), it is
always difficult to know the system status. Another PC may be needed to
monitor a headless device's status via RS-232 or Ethernet. In order to
solve this problem, UNO-1170 offers a programmable LED indicator (Fig-
ure 2.13) and buzzer. They can be programmed to show a systems status by
LED indicator flickering and buzzer alarm.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2.5: LED & Buzzer Control Register
210H
R/W DIAG LED Register
LEDS1 LEDS0 LEDEn
SPKS1 SPKS0 SPKEn
211H
R/W Buzzer Register
LEDEn:
=0, DIAG LED disable
=1, DIAG LED enable
LEDS0 and LEDS1: LED flickering speed setting bit (refer to Table 2.6)
SPKEn:
=0, Speaker disable
=1, Speaker enable
SPKS0 & SPKS1: Buzzer alarming setting bit (refer to Table 2.7)
Note: UNO-1170 provides built-in examples to show how to
configure DIAG LED and Buzzer. Refer to console
mode examples in C:\Program Files\Advan-
tech\UNO\UNO_IsaDIO\Examples\Console.
(Please install DI/O driver from the UNO CD to use
these examples)
Table 2.6: Programmable LED Control Bit
LEDS1
LEDS0
Light on
0
0
1
1
0
1
0
1
Fast flicker
Normal flicker
Short flicker
Table 2.7: Programmable Buzzer Control Bit
SPKS1
SPKS0
Beep on
0
0
1
1
0
1
0
1
Short beep
Normal beep
Long beep
UNO-1170 User Manual
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2.14 PCI/104+ Connectors (UNO-1170E only)
UNO-1170E supports up to two PCI/104+ cards. The cards will be
installed on connector noted "CN3-A" and "CN3-B". Please check your
PC/104+ card support voltage to adjust the jumper on CN4.
Table 2.8: PCI-104 Voltage Jumper Settings
Voltage
+5V
Jumper close position setting
1-2
2-3
+3.3V
Jumper Setting for +3.3V example:
closed 2-3
Figure 2.7: RS-422/485 Jumper Settings
17
Download from Www.Somanuals.com. All Manuals Search And Download.
UNO-1170 User Manual
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Initial Setup
Sections include:
• CompactFlash Installation
• PCI-104 Card Installation (UNO-1170E)
• Hard Drive Installation (UNO-1170E)
• Chassis Grounding
• Power Connection
• BIOS Setup and System Assignments
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Initial Setup
3.1 CompactFlash Card Installation
The procedure for installing a CompactFlash card into the UNO-1170/
UNO-1170E is as follows, please follows these steps carefully. Although
the outside appearance of the UNO-1170E is different from the figures
shownbelow, the procedure is the same.
1.
2.
Remove the power.
Unscrew six screws from UNO-1170 indicated below.
UNO-1170 User Manual
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Remove the rear cover.
4.
5.
Plug a CompactFlash card with user’s OS and application program
into a CompactFlash card slot on board.
Screw back the rear cover and the six screws.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 USB Keypro and Keypro Bracket Installation
1.
Keep the rear cover removed and have the USB keypro dongle
ready. (Note: Only the upper internal USB connector will work.
The lower is a dummy connector and won’t have any function)
2.
Insert the USB keypro/dongle dongle into internal USB connector
and place the keypro bracket as shown in the picture. Then, screw
the keypro bracket.
UNO-1170 User Manual
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Manually adjust the bracket to perfectly fit the USB keypro/dongle.
(Note: Due to the extremely compact space in the chassis, the length for
USB keypro has to be limited to 45mm)
3.3 Chassis Grounding
Please connect the chassis ground of UNO-1170 with "EARTH".
Figure 3.1: Chassis Grounding Connection
3.4 Power Connection
Connect the UNO-1170 to a 10 ~ 30 VDC power source. The power
source can either be from a power adapter or an in-house power source.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 PC/104+ Card Installation (UNO-1170E)
The procedure for installing a PC/104+ card into the UNO-1170E is
shown as following step.
1.
2.
Remove the power.
Unscrew six screws from UNO-1170E indicated below.
UNO-1170 User Manual
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Remove the rear cover.
4.
Find 2 metal spacer from accessory bag, and screw tight on the
location indicated arrow in the below picture. (Note: There were
spacers soldered on the daughter board already). Normally you will
also get some hexagon spacer from your PCI-104 card packing.
Use and screw those spacers on the location indicated black shown
in below picture.
5.
Please refer to section 2.12 for PCI-104 card voltage setting before
install the PCI-104 card.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
Stack the PC/104+ card and related cables.
7.
Screw the rear cover and the six screws. Now you are done with the
PC/104+ card installation.
Note
:
You can use two PC/104+ cards at the same time while
you don't use a hard drive. Using a hard drive will limit
the number of PC/104+ you used to one
UNO-1170 User Manual
26
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Hard Drive installation (UNO-1170E)
The procedure for installing a hard drive into the UNO-1170E is shown as
following step.
1.
2.
3.
Remove the power.
Unscrew six screws from UNO-1170E indicated below.
Remove the rear cover. Please refer to Section 3.1 & 3.2 for the
instruction to open the cover.
4.
Take four screws from the rear cover to lose the hard drive bracket.
5.
Connect the SATA cable and SATA power cable. Make sure the
cable will not lose. Use the screws in accessory to mount the hard
drive on the hard drive bracket.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
Turn the hard drive bracket and align with the screw hole on the
rear cover. Use the four screws taken from step 4 and screw the
bracket and the rear cover tight.
7.
Connect the other end of SATA cable on the board which the arrow
indicated in below picture.
8.
9.
Screw the rear cover and the six screws.
For user who tried to plug other SATA device, please note the
UNO-1150E SATA power connector doesn't support 12V power.
Note:
There are switch setting about SATA hard drive below,
please refer to the section A.9 for detail. The hard drive
might not work correctly if the switch setting is incorrect
UNO-1170 User Manual
28
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7 BIOS Setup and System Assignments
UNO-1170 uses the Advantech SOM-4481 and SOM-4486 CPU module.
For UNO-1170 BIOS setup and system assignments, you can refer to
SOM-4481 and SOM-4486 Chapter 4 “Award BIOS Setup” and Appen-
dix A “System Assignments”. The SOM-4481 & SOM-4486's user’s
manual is in the “Manual” folder on the CD-ROM.
Please note that you can try to “LOAD BIOS DEFAULTS” from the
BIOS Setup manual if UNO-1170 does not work properly.
3.8 DIN-rail Mounting Setup
Please follow the below steps to mount the UNO-1170 on the DIN-Rail.
1.
Screw the provided DIN-Rail Kit on the rear side of UNO-1170 as
the diagram shown below.
2.
3.
Hang the UNO-1170 to the DIN-Rail with angle of inclination
about 30 degree.
Let UNO-1170 down straight to slide over the Rail smoothly.
Note: To get the UNO-1170 down from the Rail, push the
device top to down then pull the bottom of the device to
let it off the Rail smoothly.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
3.9 Wallmounting Setup
Please follow the below steps to mount the UNO-1170 on the wall.
1.
Screw the provided Wall Mounting Kit on the rear side of UNO-
1170 as the diagram shown below.
2.
Mount the device on the wall by the 2 pairs hooking hole provided
by the Wallmounting Kit.
UNO-1170 User Manual
30
Download from Www.Somanuals.com. All Manuals Search And Download.
A
System Settings and
Pin Assignments
•Board Connectors and Jumpers
•RS-232 Serial Port (COM1~2)
•RS-232/422/485 Serial Port (COM3)
•Ethernet RJ-45 Connector
•Power Screw Terminal
•PS/2 Keyboard and Mouse Connector
•USB Connector
•VGA Display Connector
•CompactFlash Master/Slave Jumper Setting
•SATA DATA Connector
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A System Settings and Pin
Assignments
A.1 System I/O Address & Interrupt Assignments
Table A.1: UNO-1170 System I/O Ports
Address Range Device
000-01F
020-03F
040-05F
060-06F
070-07F
080-09F
0A0-0BF
0C0-0DF
0F0
DMA controller (slave)
Interrupt controller 1, (master)
8254 timer/counter
8042 (keyboard controller)
Real-time clock, non-maskable interrupt (NMI)mask
DMA page register,
Interrupt controller 2 (slave)
DMA controller (master)
Clear math co-processor
Reset math co-processor
Math co-processor
0F1
0F8-0FF
1D0
Vector address; for COM port share IRQ
Battery backup resource
Battery backup resource
1st fixed disk
1E0
11E
1F0-1F8
200-207
278-27F
2F8-2FF
380-38F
3A0-3AF
3B0-3BF
3C0-3CF
3D0-3DF
3F0-3F7
3E8-3EF
3F8-3FF
DC000-DFFFF
Game I/O
Reserved
Serial port 2
SDLC, bisynchronous 2
Bisynchronous 1
Monochrome display
Reserved
Color/graphics monitor adapter
Diskette controller
Serial port 3
Serial port 1
Battery backup resource
UNO-1170 User Manual
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A.2: UNO-1170 Interrupt Assignment
Interrupt No. Interrupt Source
NMI
Parity error detected
Interval timer
IRQ 0
IRQ 1
IRQ 2
IRQ 3
IRQ 4
IRQ 5
IRQ 6
IRQ 7
IRQ 8
IRQ 10
IRQ 11
IRQ 12
IRQ 13
IRQ 14
IRQ 15
Keyboard
Interrupt from controller 2 (cascade)
COM2
COM1
Available
Diskette controller (FDC)
Available
Real-time clock
COM3 (Independent IRQ)/COM3&COM4 Share IRQ
Reserved for watchdog timer
PS/2 mouse
INT from co-processor
Primary IDE
Secondary IDE for CompactFlash
33
Download from Www.Somanuals.com. All Manuals Search And Download.
A.2 Board Connectors and Jumpers
There are connectors and jumpers on the UNO-1170 board. The follow-
ing sections tell you how to configure the UNO-1170 hardware setting.
Figure A-1 and figure A-2 show the locations of UNO-1170 connectors
and jumpers.
Figure A.1: Connector & Jumper Locations (Top)
UNO-1170 User Manual
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A.3: Connectors & Jumpers
Lithium battery for BIOS
BH1
Lithium battery for Backup SRAM
Power Screw Terminal
BH2
CN1
Clear COMS Jumper
CN3
USB connector
CN4
VGA DB15 display connector/ COM3 RS-232/422/485
PS/2 keyboard and mouse connector
Internal USB dongle connector
Internal CompactFlash card slot
COM1 RS-232 serial port / COM2 RS-232 serial port
Ethernet port 1 / Ethernet port 2
COM2 RS-232/422/485 selection
Audio line in / Audio line out
CN5
CN6
CN7
CN8
CN10
CN11
CN13
CN14
CN15/CN16
CN17
CN18
Board to Board connector, PC/104+
SATA connector (data)
SATA connector (power)
Reset switch
SW1
SW2
SW3
RS-485 auto-flow and RS-422 Master/Slave mode for
Terminal resister for COM3
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure A.2: Connector & Jumpers (UNO-1170E)
Table A.4: Connectors & Jumpers (UNO-1170E)
CN3-B,CN3-C PC/104 card connector
CN3-A
CN5
PCI-104 card connector
Mini PCI card connector
CN4
Jumper of PCI-104 card voltage selection
(+3.3V or +5V)
UNO-1170 User Manual
36
Download from Www.Somanuals.com. All Manuals Search And Download.
A.3 RS-232 Serial Port (COM1~COM2)
Table A.5: RS-232 Serial Port Pin Assignments
Pin
Signal Name
1
2
3
4
5
6
7
8
9
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
RI
37
Download from Www.Somanuals.com. All Manuals Search And Download.
A.4 RS-232/422/485 Serial Port (COM3)
Table A.6: RS-232/422/485 Serial Ports
Pin
RS-232
RS-422
RS-485
1
2
3
4
5
6
7
8
9
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
RI
Tx-
DATA-
DATA+
NC
Tx+
Rx+
Rx-
GND
NC
NC
GND
NC
NC
NC
NC
NC
NC
NC
A.5 Ethernet RJ-45 Connector (LAN1~LAN2)
Table A.7: Ethernet RJ-45 Connector Pin Assigns
Pin
10/100Base-T Signal Name
1
2
3
4
5
6
7
8
XMT+
XMT-
RCV+
NC
NC
RCV-
NC
NC
UNO-1170 User Manual
38
Download from Www.Somanuals.com. All Manuals Search And Download.
A.6 Power Screw Terminal (CN8)
Table A.8: Phoenix Power Connector Pin Assigns
Pin
Signal Name
1
2
3
VIN ( 10 ~ 36 VDC )
GND
Field Ground
A.7 PS/2 Keyboard and Mouse Connector (CN10)
Table A.9:
6
5
3
4
2
1
Table A.10: Keyboard & Mouse Connector Pin Assigns
Pin
Signal Name
1
2
3
4
5
6
KB DATA
MS DATA
GND
VCC
KB CLOCK
MS CLOCK
39
Download from Www.Somanuals.com. All Manuals Search And Download.
A.8 USB Connector (CN13)
Table A.11: USB Connector Pin Assignments
Pin Signal Name Cable Color
1
2
3
5
VCC
Red
DATA-
DATA+
GND
White
Green
Black
A.9 VGA Display Connector (CN15)
Table A.12: VGA Adaptor Cable Pin Assignments
Pin
Signal Name
Pin
Signal Name
1
2
3
4
5
6
7
8
RED
9
EDID Power
GND
GREEN
BLUE
NC
10
11
12
13
14
15
NC
NC
GND
GND
GND
GND
H-SYNC
V-SYNC
NC
Display Memory
With 64MB share memory, the VGA controller can drive CRT displays or
color panel displays with resolutions up to 1600 x 1200 at 85 Hz.
UNO-1170 User Manual
40
Download from Www.Somanuals.com. All Manuals Search And Download.
A.10 SATA Data Connector (CN17)
Table A.13: SATA DATA Connectors (CN17)
Pin Signal Name
1
2
3
4
5
6
7
GND
A+
A-
GND
B-
B+
GND
41
Download from Www.Somanuals.com. All Manuals Search And Download.
UNO-1170 User Manual
42
Download from Www.Somanuals.com. All Manuals Search And Download.
B
Programming the
Watchdog Timer
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B Programming the Watchdog
Timer
Below are samples of code for controlling the Watchdog Timer function.
-----------------------------------------------------------------------------------
Enter the extended function mode, interruptible double-write |
-----------------------------------------------------------------------------------
MOV DX,2EH
MOV AL,87H OUT DX,AL OUT DX,AL
-----------------------------------------------------------------------------
Configured logical device 8, configuration register CRF6 |
-----------------------------------------------------------------------------
MOV DX,2EH
MOV AL,2BH OUT DX,AL MOV DX,2FH IN AL,DX
AND AL.OEFH;Setbit 4=0 Pin 89=WDTO OUT DX,AL
MOV DX,2EH
MOV AL,07H; point to Logical Device Number Reg. OUT DX,AL
MOV DX,2FH
MOV AL,08H; select logical device 8
OUT DX,AL; MOV DX,2EH
MOV AL,30H;Set watch dog activate or inactivate
OUT DX,AL MOV DX,2FH
MOV AL,01H; 01:activate 00:inactivate
OUT DX,AL; MOV DX,2EH
MOV AL,F5H; Setting counter unit is second
OUT DX,AL MOV DX,2FH MOV AL,00H OUT DX,AL; MOV
DX,2EH MOV AL,F6H OUT DX,AL MOV DX,2FH
MOV AL,05H; Set 5 seconds
OUT DX,AL
;------------------------------------------
; Exit extended function mode |
;------------------------------------------
MOV DX,2EH
MOV AL,AAH OUT DX,AL
UNO-1170 User Manual
44
Download from Www.Somanuals.com. All Manuals Search And Download.
|
