User Manual
PCM-3362
PC/104-plus SBC with
Intel® Atom™ N450, VGA, LCD,
LAN, USB2.0, SATA, and
on-board flash
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing List
Before you begin installing your card, please make sure that the following materials
have been shipped:
„
„
„
„
„
„
„
„
„
„
„
„
„
„
1 x PCM-3362 SBC
1 x SATA data cable
(p/n: 1700071000)
(p/n: 1703150102)
(p/n: 1703060053)
(p/n: 1700060202)
(p/n: 1700017863)
(p/n: 1700000898)
(p/n: 1703100260)
(p/n: 1703040157)
(p/n: 1701200220)
(p/n: 1700002332)
(p/n: 1700003491)
1 x SATA power cable
1 x Keyboard/Mouse cable
1 x Y cable for KB/MS extension
1 x Ethernet RJ-45 Conn. conversion cable
1 x VGA cable
1 x USB cable (bracket type with two USB ports)
1 x RS-422/485 COM cable
1 x RS-232 COM cable
1 x ATX Power cable
1 x AT Power cable
1 x Startup manual
1 x CD-ROM (Manual, Driver, Utility)
If any of these items are missing or damaged, contact your distributor or sales repre-
sentative immediately.
Model No.List
Description
PCM-3362N-S6A1E
Intel Atom N450 PC/104-Plus SBC, VGA, LVDS, LAN,
USB,SATA and on-board flash
Optional Accessory
1 x heatspreader
(p/n:1960047106T001)
Additional Information and Assistance
est information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
„
„
„
Product name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software,
etc.)
„
„
A complete description of the problem
The exact wording of any error messages
Declaration of Conformity
This device complies with the requirements in part 15 of the FCC rules: Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
iii
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2. This device must accept any interference received, including interference that
may cause undesired operation
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is oper-
ated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio communications. Opera- thin of
this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
flatterer. Discard used batteries according to the manufacturer's instruc-
tions.
PCM-3362 User Manual
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Features.................................................................................................... 2
Specifications............................................................................................ 2
1.3.3 Ethernet Interface ......................................................................... 3
1.3.4 OS support.................................................................................... 3
Board layout: dimensions.......................................................................... 4
v
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.5 ACPI Settings ............................................................................. 23
PCM-3362 User Manual
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Introduction & Installation ....37
4.2.2 Other OS..................................................................................... 38
4.3.2 Software APIs ............................................................................. 39
4.3.3 SUSI Utilities............................................................................... 40
4.3.4 SUSI Installation ......................................................................... 40
Chipset Software Installation Utility.....49
Before You Begin.................................................................................... 50
Installation............................................................................................... 54
System I/O Ports..................................................................................... 66
vii
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
code.................................................... 75
PCM-3362 User Manual
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Introduction
The PCM-3362 is a fanless, low power, small size (96X90mm), performance PC/104-
plus SBC (Single Board Computer) geared to satisfy the needs for various industrial
computing equipment. PCM-3362 is ideal for communication, environment monitor-
ing, factory automation, military, and medical applications that require flat panel sup-
port using digital displays with LVDS interfaces and single Ethernet ports.
For those who want superior performance for various low-power embedded applica-
tions, PCM-3362 uses an Intel® Atom™ N450 processor, supporting DDRII 667
SDRAM up to 2GB.
PCM-3362 has an integrated graphic core of Intel® Embedded Gen3.5+ graphic
technology with 224 MB shared memory. This feature makes PCM-3362 is capable
of handling complex and intense 2D/3D graphic processing, its VGA and LVDS dual
video outputs also make it suitable for applications requiring dual display or digital
panel display capabilities.
PCM-3362 offers convenient connector layout, easy assembly, multiple I/Os, and
includes a single 10/100/1000 Mbps Ethernet, four USB (Universal Serial Bus) 2.0,
one SATA2 interface, 8-bit general purpose Input/Output, two RS-232 serial ports
and one RS-422/485 serial port for easy system expansibility. PC/104-plus self-stack-
ing rugged mechanical architecture and extended temperature operation makes it
ideal for outdoor applications in the military and transportation fields.
Supported operating systems include Windows 7, Windows XP, XP Embedded, Win-
dows CE, and Linux. PCM-3362 also offers drivers and APIs for application develop-
ment including I2C, GPIO, watchdog timer, hardware monitor, panel backlight on/off,
and brightness control.
1.2 Features
„
IIntel® Atom™ N450 Processor
„
„
„
„
„
„
„
„
Supports DDR2 667 memory
Supports 18-bit LVDS LCD interface
Supports 1 X SATA2 interface
Supports 2GB on-board flash
Supports 1 x 10/100/1000 Mbps Fast Ethernet
Supports four USB2.0 ports
Supports two serial RS-232 ports (COM1/2), one RS-422/485 port(COM3)
PC/104-plus expansion interface
1.3 Specifications
1.3.1 Standard PC/104-plus Biscuit SBC Functions
„
„
CPU: Intel® Atom™ N450 processor, up to 1.67 GHz
System Memory: supports Double Data Rate (DDR) DDR2 667 SDRAM up to
2GB
Note!
PCM-3362 cannot support DDR2 533 SDRAM.
PCM-3362 User Manual
2
Download from Www.Somanuals.com. All Manuals Search And Download.
„
„
„
„
„
„
„
„
„
„
„
2nd Cache Memory: 512 KB on the processor
System Chipset: Intel® ICH8M
BIOS: AMI 16Mbit Flash BIOS
Watchdog timer: 255 levels timer interval
Expansion Interface: PC/104-Plus (ISA and PCI bus)
Battery: Lithium 3V/210 mAH
Power management: ACPI supported
Serial ATA: One Serial ATA2 interface, Speed up to 300MB/s
Flash: On board 2GB flash (IDE interface)
Serial ports: Two serial RS-232 ports (COM1/2), one RS-422/485 port(COM3)
Keyboard/mouse connector: Supports one standard PC/AT keyboard and a
PS/2 mouse
„
„
„
USB: Four USB 2.0 ports compliant universal serial bus ports
GPIO: 8 bit general purpose Input/Output
High Definition Audio: PCM-3362 can provide audio function with the optional
audio extension module PCA-AUDIO-HDA1E and specific audio cable.
1.3.2 VGA/LVDS Interface
„
„
„
Controller: Integrated graphic core of Embedded Gen3.5+ technology
VRAM: 224 MB shared system memory
Output Interfaces:
– VGA: Supports up to SXGA 1400 x 1060 @ 60Hz
– LVDS: Singe channel 18-bit LVDS up to WXGA 1366 x 768
– Dual Display: CRT + LVDS, support extended mode and clone mode
1.3.3 Ethernet Interface
„
Supports Single 10/100/1000 Mbps Ethernet networking
Controller: Intel® 82567V
„
1.3.4 OS support
This board supports Win7,Win XP, Win CE and Win XPe.
For further information about OS support in your PCM-3362, visit the following
port center.
1.3.5 Mechanical and Environmental
„
Dimensions: 96 x 90 mm (3.8" x 3.5") Mechanical Drawing (dxf file) is avail-
able.
„
„
Power Supply Type: AT/ATX
Power Requirement: +5 V ± 5%, +12 V ± 5% (Optional), (5 V only, 12 V
optional for PC104 add on card and LCD inverter)
„
Power Consumption: (Intel® Atom™ N450, 1GB DDRII 667)
– Power on Load: +5 V @ 2.28 A, +12 V @ 5mA
– Max load: +5 V @ 2.37 A, +12 V @ 7mA
– Idle mode: +5 V @ 2 A, +12 V @ 5mA
„
Power Consumption Conditions:
– Test software: Maxpower + 3DMark 2005
3
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
– Power on - Boot: Measure the maximum current value of between system
power on and boot-up to O.S.
– Max. load: Measure the maximum current value which system under maxi-
mum load (CPU: Top speed, RAM &Graphic: Full loading)
– Idle mode: Measure the current value when system in windows mode and
without running any program
„
„
Operating temperature: 0 ~ 60°C (32 ~ 140°F) (operation humidity: 40°C @
85% RH Non-Condensing)
Weight: 0.85 kg (reference weight of total package)
1.4 Board layout: dimensions
Figure 1.1 Board layout: Dimensions (Component Side)
PCM-3362 User Manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PCM-3362 User Manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
This chapter explains the setup procedures of the PCM-3362 hardware, including
instructions on setting jumpers and connecting peripherals, switches and indicators.
Be sure to read all safety precautions before you begin the installation procedure.
2.1 Jumpers
The PCM-3362 has a number of jumpers that allow you to configure your system to
suit your application. The table below lists the functions of the various jumpers.
Table 2.1: Jumpers
JP1
JP2
JP3
JP4
CLEAR CMOS
LVDS Panel Power Select
COM3 RS422/RS485 Select
PCI I/O Voltage Select
2.2 Connectors
Onboard connectors link the PCM-3362 to external devices such as hard disk drives,
a keyboard, or floppy drives. The table below lists the function of each of the board's
connectors.
Table 2.2: Connectors
Label
CN1
Function
HD Audio Connector
SO-DIMM Connector
LVDS Connected
CN4
CN6
CN7
Panel Inverter Connector
VGA Connector
CN8
CN9
USB Port0/1 Connector
USB Port2/3 Connector
Front panel Connector
Buzzer Connector
CN10
CN12
CN13
CN15
CN16
CN17
CN18
CN19
CN20
CN21
CN23
CN24
CN25
CN26
P1
SATA Connector
COM1~COM2 Connector
RS422/485 Connector
LAN Connector
LAN LED Connector
PS2 Keyboard/Mouse Connector
GPIO Connector
ATX Power In Connector
Power In Connector
I2C BUS connector
-12 V & -5 V power connector
PC104-plus Connector
RTC Battery Connector
BH1
PCM-3362 User Manual
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2.3 Block diagram
2.4 Setting Jumpers
You may configure your card to match the needs of your application by setting jump-
ers. A jumper is a metal bridge used to close an electric circuit. It consists of two
metal pins and a small metal clip (often protected by a plastic cover) that slides over
the pins to connect them. To “close” a jumper, you connect the pins with the clip. To
“open” a jumper, you remove the clip. Sometimes a jumper will have three pins,
labeled 1, 2 and 3. In this case you would connect either pins 1 and 2, or 2 and 3.
RSHQ
FORVHG
FORVHGꢀꢁꢂꢃ
PCM-3362 User Manual
10
Download from Www.Somanuals.com. All Manuals Search And Download.
The jumper settings are schematically depicted in this manual as follows:
Closed 2-3
Open
Closed
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes. Generally, you
simply need a standard cable to make most connections.
2.4.1 Clear CMOS (JP1)
The PCM-3362 single board computer contains a jumper that can erase CMOS data
and reset the system BIOS information. Normally this jumper should be set with pins
1-2 closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a
few seconds, and then move the jumper back to 1-2 closed. This procedure will reset
the CMOS to its default setting.
Warning! To avoid damaging the computer, always turn off the power supply
before clearing CMOS.
Table 2.3: Clear CMOS (JP1)
Setting
1-2
Function
Normal (default)
Clear CMOS
2-3
2.4.2 LVDS Panel Power Select (JP2)
Table 2.4: LVDS Panel Power Select (JP2)
Setting
1-2
Function
5 V
2-3
3.3 V (default)
11
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4.3 COM3 RS422/RS485 Select (JP3)
Table 2.5: COM3 RS422/RS485 Select (JP3)
Setting
1-2
Function
RS-485 (default)
RS-422
2-3
2.4.4 PCI I/O Voltage Select (JP4)
The PCI Host board will always determine the PCI signaling level on the bus by set-
ting all VI/O pins to either 3.3 V or 5 V. If VI/0 is set to 3.3 V, then the system will use
3.3 V I/O signaling, likewise, if VI/O is set to 5 V, then the system will use 5 V I/O sig-
naling. Some PCI host modules may only allow one of the options, while others may
provide a jumper to allow the user to select the signaling level. Once the signaling
level is selected, the remaining boards in the system must use that signaling level.
Table 2.6: PCI I/O Voltage Select (JP4)
Setting
1-2
Function
5 V (default)
3.3 V
2-3
2.5 Installing SODIMMs
The procedures for installing SODIMMs are described below. Please follow these
steps carefully. You can install SDRAM memory modules using 200-pin SODIMMs
(Small Outline Dual In-line Memory Modules).
1. Ensure that all power supplies to the system are switched off.
2. Tilt the SODIMM card just above the board and slide it into the housing card
slot.
3. Push the module into the socket until the module gently snaps in. There should
only be a slight insertion force to engage the module into the contacts. Make
sure that the module and the housing are aligned and locked in place.
2.6 Flash
The board provides onboard NAND Flash memory to replace CF socket. NANDriv-
eTM integrated circuits (IC) are high-performance, fully-integrated, embedded flash
solid state drives. They combine an integrated ATA Controller in a multi-chip pack-
age. These products are ideal for industrial grade solid state mass storage applica-
tions offering new and expanded functionality while enabling cost effective designs.
PCM-3362 User Manual
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PCM-3362 supports 2GB industrial grade NAND NANDriveTM IC and up to 4GB for
option. Flash endurance is about 100 Million write cycles. Data Retention is about 10
Years. PCM-3362’s NANDriveTM IC supports up to Ultra DMA Mode-4 and endures
in wide temperature range of -40°C to +85°C for industrial operation.
2.7 High Definition Audio Interface (CN1)
The PCM-3362 provides high definition audio interface. It can support high definition
audio stereo by customized audio module that has codec onboard or by Advantech’s
PCA-AUDIO-HDA1E module through specific cable.
2.8 VGA/LCD interface connections
The PCM-3362’s VGA interface can drive conventional CRT displays and is capable
of driving a wide range of LVDS flat panel displays. The board has two connectors to
support these displays: one for standard CRT VGA monitors, one for LVDS type LCD
panels.
2.8.1 CRT display connector (CN8)
CN8 is a 12-pin, dual-inline header used for conventional CRT displays. A simple
one-to-one adapter can be used to match CN8 to a standard 15-pin D-SUB connec-
tor commonly used for VGA. Users can drive a standard progressive scan analog
monitor with pixel resolution up to SXGA 1400 x 1060 @ 60Hz. Pin assignments for
CRT display connector CN8 are detailed in Appendix A.
2.8.2 LVDS connector (CN6)
The PCM-3362 uses the Intel Atom N450 that supports single -channel 18-bit LVDS
panel up to WXGA 1366 x 768 UXGA panel resolution.
2.8.3 Panel Inverter Power (CN7)
The LCD inverter is connected to CN7 via a 5-pin connector to provide +5 V/+12 V
power to the LCD display. JP2 provides inverter voltage selection function, closing
Pin 1, 2 is for 5 V power input inverter; closing Pin 2, 3 is for 3.3 V power input
inverter.
2.9 USB connectors (CN9 & CN10)
The board provides up to four USB (Universal Serial Bus) ports using Plug and Play.
The USB interfaces comply with High Speed USB specification Rev. 2.0 which sup-
ports 480 Mbps transfer rate, and are fuse protected.
The USB interface is accessed through two 5 x 2-pin pin header connectors. You will
need an adapter cable if you use a standard USB connector. The adapter cable has a
5 x 2-pin connector on one end and a USB connector on the other. The USB inter-
faces can be disabled in the system BIOS setup.
2.10 Front Panel Connector (CN12)
You may want to install external switches to monitor and control the PCM-3362.
These features are optional: install them only if you need them.
Power Button(Pin1 & Pin2)
PCM-3362 supports power on/off button.
13
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset (Pin3 & Pin4)
If you install a reset switch, it should be an open single pole switch.
Momentarily pressing the switch will activate a reset.
POWER LED (Pin5 & Pin6)
POWER LED indicator would light when the power is on.
HDD LED (Pin7 & Pin8)
The HDD LED indicator for hard disk access is an active low signal.
2.11 Buzzer Connector (CN13)
PCM-3362 provides one buzzer connector to connect buzzer for alert function.
Buzzer, Advantech’s P/N:1750005282, can be selected to install on board.
2.12 SATA Connector (CN15)
In addition to on board 2GB flash, PCM-3362 features one high performance serial
ATA interfaces (up to 300 MB/s) that eases cabling to hard drives with thin and long
cables while your application need more large storage capacity.
2.13 COM port connector (CN16 & CN17)
The board provides three serial ports: two serial RS-232 ports in one 20 pin connec-
tor (CN16:COM1/2), and one serial port RS422/485 in 4 pin connector(CN17:
COM3).
It provides connections for serial devices or a communication network. You can find
the pin assignments for the COM port connector in Appendix.
2.13.1 Serial Port RS-422/485 (CN17)
COM3 (CN17) can be configured to operate in RS-422 or RS-485 mode by JP3.
2.14 Giga LAN Connector (CN18)
PCM-3362 uses the Intel? 82567V Gigabit LAN chips are linked to dedicated PCIe x1
lanes. PCM-3362 provide high throughputs for heavy loading networking environ-
ment. LAN connections are made via two internal 10-pin box header.
2.14.1 LAN LED Connector (CN19)
PCM-3362 provides an external LAN LED Pin header for connecting to the front side
of the chassis. With this convenient design users may know whether the LAN port is
acting or not easily. Refer to Appendix for detailed information on the pin assign-
ments.
2.15 Keyboard and PS/2 mouse connector (CN20)
The board provides a keyboard connector that supports both a keyboard and a PS/2
style mouse. In most cases, especially in embedded applications, a keyboard is not
used. If the keyboard is not present, the standard PC/AT BIOS will report an error or
fail during power-on self-test (POST) after a reset. The PCM 3362's BIOS standard
setup menu allows you to select "All, But Keyboard" under the "Halt On" selection.
This allows no-keyboard operation in embedded system applications, without the
system halting under POST.
PCM-3362 User Manual
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2.16 GPIO Connector (CN21)
The board supports 8-bit GPIO through GPIO connector. The 8 digital inputs and out-
puts can be programmed to read or control devices, with each input or output
defined.
2.17 ATX Power in connector (CN23)
The PCM-3362 can support an advanced soft power switch function, if an ATX power
supply is used. please follow below instruction to enable ATX functions.
1. Plug ATX power cable (1700002332) into CN24.
2. Connect the 3-pin plug of this power cable to CN23 (ATX Power in connector).
3. Connect the power on/off button cable of the chassis to CN12 (front panel con-
nector) pin1-2.
Caution! Important Make sure that the ATX power supply can take at least a
10mA load on the 5 V standby lead (5VSB). If not, you may have diffi-
culty powering on your system.
2.18 Power Connectors (CN24)
Supplies main power +5 V to the PCM-3362, and to devices that require +12 V.
2.19 I2C Bus connector (CN25)
PCM-3362 provides I2C Bus connector for customer connection to I2C protocol
embedded device.
Advantech also provide I2C API allowing a developer to interface with an embedded
system environment and transfer serial messages using the I2C protocols, allowing
multiple simultaneous device control.
2.20 -12 V & -5 V power connector (CN26)
The PCM-3362 is equipped with a Negative Power Input connector providing -12 V &
-5 V power if your applications happen to need it.
2.21 Watchdog timer configuration
An onboard watchdog timer reduces the chance of disruptions which EMP (electro
magnetic pulse) interference can cause. This is an invaluable protective device for
standalone or unmanned applications. Setup involves one jumper and running the
control software (refer to Appendix).
15
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
PCM-3362 User Manual
16
Download from Www.Somanuals.com. All Manuals Search And Download.
AMIBIOS has been integrated into many motherboards for over a decade. With the
AMIBIOS Setup program, you can modify BIOS settings and control the various sys-
tem features. This chapter describes the basic navigation of the PCM-3362 BIOS
setup screens.
Figure 3.1 Setup program initial screen
AMI’s BIOS ROM has a built-in Setup program that allows users to modify the basic
system configuration. This information is stored in battery-backed CMOS so it retains
the Setup information when the power is turned off.
3.1 Entering Setup
Turn on the computer and check for the “patch” code. If there is a number assigned to
the patch code, it means that the BIOS supports your CPU. If there is no number
assigned to the patch code, please contact an Advantech application engineer to
obtain an up-to-date patch code file. This will ensure that your CPU’s system status is
valid. After ensuring that you have a number assigned to the patch code, press
<DEL> and you will immediately be allowed to enter Setup.
3.2 Main Setup
When you first enter the BIOS Setup Utility, you will encounter the Main setup screen.
You can always return to the Main setup screen by selecting the Main tab. There are
two Main Setup options. They are described in this section. The Main BIOS Setup
screen is shown below.
PCM-3362 User Manual
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 3.2 Main setup screen
The Main BIOS setup screen has two main frames. The left frame displays all the
options that can be configured. Grayed-out options cannot be configured; options in
blue can. The right frame displays the key legend.
Above the key legend is an area reserved for a text message. When an option is
selected in the left frame, it is highlighted in white. Often a text message will accom-
pany it.
3.2.1 System time / System date
Use this option to change the system time and date. Highlight System Time or Sys-
tem Date using the <Arrow> keys. Enter new values through the keyboard. Press the
<Tab> key or the <Arrow> keys to move between fields. The date must be entered in
MM/DD/YY format. The time must be entered in HH:MM:SS format.
3.3 Advanced BIOS Features Setup
Select the Advanced tab from the PCM-3362 setup screen to enter the Advanced
BIOS Setup screen. You can select any of the items in the left frame of the screen,
such as CPU Configuration, to go to the sub menu for that item. You can display an
Advanced BIOS Setup option by highlighting it using the <Arrow> keys. All Advanced
BIOS Setup options are described in this section. The Advanced BIOS Setup
screens is shown below. The sub menus are described on the following pages.
19
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 3.3 Advanced BIOS features setup screen
3.3.1 CPU Configuration
Figure 3.4 CPU Configuration Setting
Max CPUID Value Limit
This item allows you to limit CPUID maximum value.
Execute-Disable Bit Capability
This item allows you to enable or disable the No-Execution page protection technol-
ogy.
Hyper Threading Technology
This item allows you to enable or disable Intel® Hyper Threading technology.
Intel® SpeedStepTM tech
When set to disabled, the CPU runs at its default speed, when set to enabled, the
CPU speed is controlled by the operating system.
PCM-3362 User Manual
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® C-STATE tech
This item allows the CPU to save more power under idle mode.
Enhanced C-States
CPU idle set to enhanced C-States, disabled by Intel® C-STATE tech item.
3.3.2 IDE Configuration
Figure 3.5 IDE Configuration
ATA/IDE Configuration
This item allows you to select Disabled / Compatible / Enhanced.
Legacy IDE Channels
When set to Enhanced mode you can select IDE or AHCI mode. When select Com-
patible mode you can select SATA only / SATA pri, PATA sec or PATA only.
Primary/Secondary/Third IDE Master
BIOS auto detects the presence of IDE device, and displays the status of auto detec-
tion of IDE device.
„
„
„
Type: Select the type of SATA driver.[Not Installed][Auto][CD/DVD][ARMD]
LBA/Large Mode: Enables or Disables the LBA mode.
Block (Multi-Sector Transfer): Enables or disables data multi-sectors trans-
fers.
„
„
„
„
PIO Mode: Select the PIO mode.
DMA Mode: Select the DMA mode.
S.M.A.R.T.: Select the smart monitoring, analysis, and reporting technology.
32Bit Data Transfer: Enables or disables 32-bit data transfer.
Hard Disk Write Protect
Disable/Enable device write protection. This will be effective only if device is
accessed through BIOS.
IDE Detect Time Out (Sec)
This item allows you to select the time out value for detecting ATA/ATAPI device(s).
21
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.3 Super I/O Configuration
Figure 3.6 Super I/O Configuration
Serial Port1 / Port2 / Port3 address
This item allows you to select serial port1 ~ port3 of base addresses.
Serial Port1 / Port2 / Port3 IRQ
This item allows you to select serial port1 ~ port3 of IRQ.
Auto Direction Control Sel
This item allows you to enable or disable auto flow control function.
3.3.4 Hardware Health Configuration
Figure 3.7 Hardware health configuration
H/W Health Function
This item allows you to control H/W monitor of showing.
PCM-3362 User Manual
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Temperature & Voltage show
CPU/System Temperature
Vcore / +3.3Vin / +5Vin / +12Vin / VBAT
3.3.5 ACPI Settings
Figure 3.8 ACPI Settings
3.3.5.1 General ACPI Configuration
Figure 3.9 General ACPI Configuration
Suspend mode
Select the ACPI state used for system suspend.
Report Video on S3 Resume
This item allows you to invoke VA BIOS POST on S3/STR resume.
23
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.5.2 Advanced ACPI Configuration
Figure 3.10 Advanced ACPI Configuration
ACPI Version Features
This item allows you to enable RSDP pointers to 64-bit fixed system description
tables.
ACPI APIC support
Include APIC table pointer to RSDT pointer list.
AMI OEMB table
Include OEMB table pointer to R(x)SDT pointer lists.
Headless mode
Enable / Disable Headless operation mode through ACPI.
3.3.5.3 Chipset ACPI Configuration
Figure 3.11 Chipset ACPI Configuration
PCM-3362 User Manual
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Energy Lake Feature
Allows you to configure Intel's Energy Lake power management technology.
APIC ACPI SCI IRQ
Enable/Disable APIC ACPI SCI IRQ.
USB Device Wakeup From S3/S4
Enable/Disable USB Device Wakeup from S3/S4.
High Performance Event Timer
Enable/Disable High performance Event timer.
3.3.6 AHCI Configuration
Figure 3.12 Advanced ACPI Configuration
AHCI Ports0
While entering setup, BIOS auto detects the presence of IDE devices. This displays
the status of auto detection of IDE device.
25
PCM-3362 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.7 APM Configuration
Figure 3.13 APM Configuration
Power Management/APM
Enable or disable APM.
Power Button Mode
Power on, off, or enter suspend mode when the power button is pressed. The follow-
ing options are also available.
Restore on AC power Loss
Use this to set up the system response after a power failure. The "Off" setting keeps
the system powered off after power failure, the "On" setting boots up the system after
failure, and the "Last State" returns the system to the status just before power failure.
Video Power Down Mode
Power down video in suspend or standby mode.
Hard Disk Power Down Mode
Power down Hard Disk in suspend or standby mode.
Standby Time Out
Go into standby in the specified time.
Suspend Time Out
Go into Suspend in the specified time.
Resume On Ring
Enable / Disable RI to generate a wake event.
Resume On PME#
Enable / Disable PME to generate a wake event.
Resume On RTC Alarm
Enable / Disable RTC to generate a wake event.
PCM-3362 User Manual
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|