Addonics Technologies Network Card NAS2XU2 User Manual

T E C H N O L O G I E S  
User Guide  
NAS 2.0 Adapter  
(NAS2XU2)  
v5.1.11  
Technical Support  
If you need any assistance to get your unit functioning properly, please have your  
product information ready and contact Addonics Technical Support at:  
Hours: 8:30 am - 6:00 pm PST  
Phone: 408-453-6212  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I.  
NAS2XU2 Hardware Installation  
Access LED  
System LED  
Power LED  
USB Mass  
5V Power Jack  
Reset Button  
RJ45 Socket  
Storage Device  
USB Printer  
1.  
Connect external USB Storage device into USB port of the NAS  
Adapter. Power on the USB Storage device.  
2.  
3.  
Connect LAN cable via LAN switch and Router.  
Connect 5V power adapter to power up the NAS adapter  
NAS2XU2 connected directly to a computer’s NIC card  
If you connect the NAS2XU2 to a computer directly, the will act as a DHCP server,  
assigning itself an IP address automatically and will also assign an IP address to the  
computer’s network card. This configuration will not enable you to see the drive on  
the network.  
NAS2XU2 connected to a Router or Switch  
When the NAS2XU2 is connected to a LAN network with an active DHCP server, it  
will obtain an IP address from DHCP server automatically. Or if your LAN network  
does not have an active DHCP server, NAS2XU2 will immediately act as DHCP  
server and assign itself an IP address for installation.  
II.  
Search NAS2XU2 using SDisk Utility  
1.  
Browse the CD enclosed in the product package. Copy and paste  
“SDisk Utility” in to your computer then double click the icon to start  
search.  
Note: “SDisk utility” was written with JAVAscript, please make sure your computer  
has installed JAVA before, if not please install the JAVA JRE from the CD drive.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support (M-F 8:30am - 6:00pm PST)  
Phone: 408-453-6212  
2.  
When NAS2XU2 has been found, click “Connect” to enter web GUI  
utility.  
Open NAS2XU2 web GUI by using web browser.  
1.  
2.  
Open web browser and type default host name “storage” in the  
search bar.  
Default login is “admin” for both User name and password. Click  
“OK” to enter configurations.  
Identification  
You can change and modify your host, group name and password from this page.  
Click “Apply” to save the setting.  
Host name: This is used to identify your device on the network. If you prefer  
a different name, type in the new name and click “Apply” to save setting.  
Group Name: This should be the same as your workgroup. In general, the  
default “WORKGROUP” will be OK. But if your workstation belongs to  
different workgroup, type in the correct group name to modify.  
For Window OS, right click on “My computer” and choose “Properties”, go to the  
computer name tab to see your current workgroup.  
If using a Mac OS system, to join a Windows workgroup, open the directory access  
utility (under Applications-> utilities). Select SMB and click configure to modify the  
settings (administrator access required to access this option.)  
Note: We strongly suggest you to change the password as soon as you  
logged in, to prevent unauthorized access.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support (M-F 8:30am - 6:00pm PST)  
Phone: 408-453-6212  
LAN Configuration  
By default, “LAN Config” is set to “Automatic IP”. This will allow the NAS2XU2 to  
obtain its IP address automatically. If you prefer setting it manually, select the static  
IP option, enter your own value and click “Apply” to confirm the new setting.  
Disk Utility  
In this page, you can manage hard disk settings of the USB storage device.  
Format: For first time installation, you need to format hard disk into FAT32  
file system. Formatting the drive will erase all data on the hard drive.  
Warning: For hard drives with data on it, create a backup before  
proceeding to format the hard drive!  
Tip: You can transfer back the backup data to the NAS Public folder for  
sharing via the network or USB connection of the USB Storage device.  
Scan Disk: After the scan, it will show file content information and health  
status for the hard disk.  
To access Samba PUBLIC folder of NAS2XU2 in Windows  
Click on the Windows icon located on the bottom left corner of the screen, on the  
“Search programs and files” \\ followed by the IP address.  
Eg:\\192.168.1.121 and press Enter key to continue.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support (M-F 8:30am - 6:00pm PST)  
Phone: 408-453-6212  
Type “Guest” as username. Leave password empty. Click on OK.  
This will direct you to the Public folder on the NAS drive.  
Now you have set up the folder that you wish to share on your NAS . This folder can  
be access from other computer on your local network.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support (M-F 8:30am - 6:00pm PST)  
Phone: 408-453-6212  
To list the NAS drive in Network Places  
Go to Network Places in Windows XP, under Network Tasks, click on the “Set  
up a home or small office network”. Follow the wizard and once completed,  
reboot your system.  
For Vista and Windows 7, enable file sharing when accessing the NAS over  
the network.  
To access Samba PUBLIC folder of NAS2XU2 in Ubuntu 8.04  
First, using the console get the prerequisites for the samba file system:  
$ sudo aptitude install samba smbfs  
$ mkdir /mnt/NAS  
$ sudo mount.cifs //NAS__IP_address/Public /mnt/NAS -o username=Guest  
To access Samba PUBLIC folder of NAS2XU2 in Mac OS X  
1.  
2.  
3.  
4.  
Start at the "Go" drop down menu at the top of your screen,  
then click "Connect to server".  
Type into the "Server Address" field 'smb://' followed by the  
IP address of the NAS2XU2 you want to connect.  
Click the "Connect" button in the bottom right corner of the  
window.  
Enter in a username and password. Click the "OK" button in  
the bottom right hand corner of the window to finish.  
Note: The workgroup name needs to be the workgroup the  
PC belongs to. If you don't know the workgroup that the PC  
belongs to you can find out by right clicking on the "My  
Computer" desktop icon on the PC, selecting "Properties"  
and then selecting the "Computer Name" tab. The work  
group name is about half way down the window.  
5.  
Select the "share" you are after. This simply refers to a  
particular group of shared files. Click "OK".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support (M-F 8:30am - 6:00pm PST)  
Phone: 408-453-6212  
CONTACT US  
Phone:  
Fax:  
408-573-8580  
408-573-8588  
Email:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support (M-F 8:30am - 6:00pm PST)  
Phone: 408-453-6212  

3M VCR 7620 T 95 User Manual
ACP EP Memory Camera Accessories 60X User Manual
AEG Cooktop 111 K W D G User Manual
Airlink101 Security Camera AICN500 User Manual
Aiwa Stereo System XR H33MD User Manual
Alliance Laundry Systems Washer FLW2169N User Manual
Alpine CD Player CDA 9855 User Manual
Axis Communications Security Camera P5512 User Manual
Axis Communications Security Camera Q1931 User Manual
Beko Refrigerator TL 685 APW User Manual