Addonics Technologies Network Card ADU2N1G User Manual

ADDONICS TECHNOLOGIES  
Model: ADU2N1G  
For more detailed information on setting up the NAU (Network  
Functions of the NAU adapter  
Attached USB) adapter, refer to the User Manual located on the CD  
that came with the device.  
A. Using NAU adapter as USB server  
Attaching any USB device to the network via NAU adapter.  
Double click the “Launch NAU Adapter” on the PC desktop screen.  
This will open the NAU adapter window. Allow about 30 seconds for the  
USB device to show up on the window.  
power adapter  
input  
RJ45 socket  
(10/100/1000 Mbps  
ethernet)  
Factory default  
reset button  
USB2.0 port  
I.  
Hardware Installation  
1. Plug in the Ethernet wire into the RJ-45 socket of the NAU adapter  
and the other end of the wire to a router or a switch.  
2. Connect the DC-Jack with the bundled power adapter. Green LED  
will light up. If an active Ethernet line is detected, the yellow LED will  
also light up.  
3. Attach your USB2.0 device to the NAU adapter.  
power adapter input  
By default, the NAU adapter is set as a DHCP client.  
As shown on the above screenshot, shows the USB device is attached to  
the NAU adapter. In this case, it is a USB speaker. You would observe  
that it is free below the status column.  
CAT5, CAT5e  
or CAT6 cable  
NAU adapter  
To connect to the USB speaker, click on the USB media to select it then  
click on the Connect Device button to access the device.  
This will change the status to „Locally Connected‟. You will also observed  
the Connect button is also change to „Disconnect Device‟.  
Any USB  
device  
The USB device should now appear in Device Manager.  
Disconnect the USB device  
To disconnect the USB device from the PC client, click on the  
„Disconnect Device‟ button.  
II. Software Installation for every PC client  
B. Using NAU adapter as Print server  
Note: A USB printer is connected to the NAU adapter.  
Note: The Addonics NAU Adapter utility need to be installed on  
every PC client in order to access the USB2.0 device attached to the  
NAU adapter.  
Allow multiple PC clients with the NAU Adapter utility installed to access a  
USB printer plug into the NAU Adapter which is connected to a LAN  
network as a network printer.  
1. Insert the driver CD of the NAU adapter on your PC.  
2. Run the application file “Addonics NAU Adapter utility” and follow the  
installation wizard.  
Double click the “Lauch Network Printer” on the PC desktop screen.  
3. Check and confirm the following new shortcut icons are generated  
on the PC desktop  
This will open the Network Printer wizard window. Allow about 30  
seconds for the USB device to show up on the window. Follow the  
onscreen instructions to complete installation.  
Use this icon to access the USB2.0 devices (except  
printers) attached to the NAU adapter. Only one client  
at a time can connect to the USB device.  
When everything completes successfully, a new printer drive icon will  
appear under the Printer / Fax folder.  
To configure multiple PC clients to use the USB printer attached to the  
NAU adapter as a network printer, install the Addonics NAU Adapter  
utility on all the PC clients and repeat the printer server installation  
procedure above.  
Use this icon when the NAU adapter is configured as  
a printer server. Multiple clients can print on the NAU  
network printer. This allows the printer attached to the  
NAU adapter to be shared simultaneously by multiple  
users on the network  
TECHNICAL SUPPORT  
Phone:  
Hours:  
Email:  
408-453-6212  
8:30 am - 6:00 pm PST  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Pet Fence 3CR100AV97 User Manual
Abit Computer Hardware IS7 User Manual
Acer Network Card WT 300 User Manual
Acer Tent AC701 User Manual
Alcatel Carrier Internetworking Solutions Network Card LC 2G24FP User Manual
American Standard Hot Tub 2422L LA V VA User Manual
Atlona TV Antenna AT DVI 41A User Manual
ATON Switch DHSIP User Manual
BC Speakers Portable Speaker ME60 User Manual
Behringer Electronic Keyboard EG8280USB User Manual