T E C H N O L O G I E S
User Guide
Cipher Z-Drive Enclosure
(ZESAES256 / ZSAES256EU)
v3.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Download from Www.Somanuals.com. All Manuals Search And Download.
Back
Fan
Switch
CipherChain
CipherChain
Power Connector
Cipher
eSATA
(to host)
PWR
HDD
RESET
eSATA Port
Power LED
HDD LED
CipherChain
Cipher
eSATA
(to host)
PWR
HDD
RESET
Cipher Keyhole
Reset Switch
How to operate the Cipher Z-Drive Enclosure:
Note: Hot swapping refers to the ability to plug and unplug the component without
rebooting.
1. Insert the AES 256-bit cipher key into the cipher keyhole on the Cipher Z-Drive
Enclosure.
2. Power on the device.
3. Observe that the green Power LED should light up. If it does not, re-insert the
cipher key and re-power the device or reset the Cipher Z-Drive Enclosure.
4. For new drive, go to the operating system’s management utility to partition, format
and mount the encrypted drive.
Note: You may remove the cipher key from the Cipher Z-Drive Enclosure once it is
powered on. All the files being transferred into the drive are still encrypted even if the
cipher key is removed. Always keep a spare master key in a safe place.
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Reset switch
Under certain applications, the RESET button enables the connecting and
disconnecting of the Cipher Z-Drive Enclosure without restarting the system.
Following are examples of such applications:
a. When the cipher key is removed from the Z-Drive Enclosure, pressing the
reset switch will clear the key code and remove the drive icon. This is good for
security when the Z-Drive Enclosure is left unattended.
b. Likewise when the Z-Drive Enclosure is connected and powered on with a
cipher key, pressing the RESET button will initialize the drive. Note that if the hard
drive is not encrypted or if the cipher key does not match with what is on the
encrypted hard drive, it will show up as an unallocated drive under the drive
management screen and no drive icon will show up on the My Computer folder.
It’s very important to make sure that the correct cipher key is used on the hard
drive. Proceeding to initialize the hard drive will erase all the data beyond
any possibility of recovery.
Green Power LED
In order for the green power LED of the CipherChain mounted on the Cipher
Z-Drive Enclosure to turn on, the cipher key must be inserted prior to powering or
resetting the Cipher Z-Drive Enclosure. If the power LED does not light up, the
computer will not detect the hard drive connected to the Cipher Z-Drive
Enclosure.
Yellow Power LED
Lights up when there is drive activity.
CONTACT US
Phone:
Fax:
408-573-8580
408-573-8588
Email:
Download from Www.Somanuals.com. All Manuals Search And Download.
|