Acer Computer Monitor AL2216W User Manual

Table of Contents  
Safety  
Electrical safety  
………………………………………………………………  
………………………………………………………………  
1
1
1
1
2
Installation safety ………………………………………………………………  
Cleaning safety  
………………………………………………………………  
………………………………………………………………  
Special notes on LCD  
monitors  
Package contents  
………………………………………………………………  
………………………………………………………………  
2
3
Installation  
instructions  
Placement  
………………………………………………………………  
………………………………………………………………  
………………………………………………………………  
………………………………………………………………  
………………………………………………………………  
………………………………………………………………  
………………………………………………………………  
………………………………………………………………  
………………………………………………………………  
………………………………………………………………  
3
3
4
5
7
8
8
8
8
9
Installation  
External controls  
Image adjustment  
Screen adjustment  
Attachments  
Plug and play  
Power saver  
Troubleshooting  
Technical  
specifications  
Display modes  
………………………………………………………………  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special notes on LCD monitors  
The following symptoms are normal for LCD monitors and do not indicate a problem with  
the device:  
y Due to the nature of the fluorescent light, the screen may flicker during initial  
use.Turnoffthepowerswitchandthenturnitonagaintomaketheflickerdisappear.  
y Youmayfindslightlyunevenbrightnessonthescreendependingonthedesktoppattern  
you use.  
y The LCD screen has effective pixels of 99.99% or more. It may include blemishes  
of 0.01% or less (caused by a missing pixel or a pixel that is always lit).  
y When the same image is displayed for hours on end, its afterimage may remain after  
switchingtoanewimage.Whenthishappens,thescreenwillrecoverslowlybychanging  
the image. Turning the LCD monitor off for several hours will also correct this  
problem.  
Package contents  
LCD display  
D-Sub signal cable  
DVI signal cable  
(optional)  
Quick Start Guide  
(with speakers)  
Power cable  
User's Guide (CD)  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Note: Read the Safety section carefully before starting the installation.  
Placement  
When installing your LCD monitor, consider the placement of the monitor:  
y Tominimizethereflectionofthemonitor, protectyoureyes, andensure  
premium quality, don’t install your LCD monitor near windows or where  
there is backlight. Keep the monitor at least 30 cm away from your eyes.  
y The upper edge of the monitor should be just a little higher than your  
line of sight.  
y Adjust the front and back dip angles of the monitor, so that you can  
view the display comfortably.  
Connecting the base to the monitor  
Installati  
on  
Take the base out of the box and place it on a  
flat table.  
y Position the monitor on top of the base.  
y Connectthebaseintotheneckofthemonitor  
along the track.  
y You will hear a click sound when the base  
and the monitor are properly connected.  
Connecting the LCD monitor to a PC  
y Make sure that the power supply of your PC  
isturnedoffandthepowerplugisremoved.  
y Connect and fasten both ends of the signal  
cable to your PC host and LCD monitor,  
respectively.  
y ConnecttheattachedpowercabletoyourLCD  
monitor.  
y Plug the power cable into the receptacle.  
y Use the cable tie to bind up the power cord  
and the D-sub signal cable / DVI-D cable.  
y Turn on the power supplies of your PC and  
LCD monitor.  
X Power cable  
Y DVI signal cable  
(optional)  
Z D-Sub signal cable  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
External  
controls  
Power On/Off  
Green indication: Power is on and normal.  
Power source Orangeindication:Sleepstatusintheenergy-saving  
mode.  
1
Colorless indication: Power off.  
Press this button to enter OSD. Press it again to exi  
2
3
Menu  
>
OSD Menu  
OSD.  
Press this button for selection or adjustment when  
OSD is started.  
Plus  
Press this button and click < and > to adjust volume  
4
5
<
Minus  
when OSD is not started (for the model with speakers  
only).  
Press this button to exit the manual when OSD is  
started.  
Press this button for the display to optimize the  
position, phase and clock pulse automatically when  
OSD is not started.  
Automatic  
adjustment  
Auto  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
The image settings of your LCD monitor were adjusted to their optimal status  
for analog TV before shipment. (See Page 9). If you want to adjust the image  
settings to suit your personal preference, follow the steps below:  
1. Click Menu to display the OSD window as shown in the following figure.  
2. Click Plus or Minus to select the function to be adjusted as shown in  
the following figure.  
Image  
adjustment  
for analog  
3. Click the Menu again to select the function to be adjusted.  
4. Click Plus or Minus to change current settings.  
5. To exit the OSD window, select " " to close and save changes. To change  
other settings, repeat steps 2-4.  
Bright/Contract  
Phase/Clock pulse  
Horizontal/Vertical  
Color Temp. Adjustment  
Language Selection  
OSD Setting  
Auto  
Message  
Restore  
Exi  
(Analog)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
The image settings of your LCD monitor were adjusted to their optimal status  
fordigitalTVbeforeshipment. (SeePage9). Ifyouwanttoadjusttheimage  
settings to suit your personal preference, follow the steps below:  
1. Click Menu to display the OSD window as shown in the following figure.  
2. Click Plus or Minus to select the function to be adjusted as shown in  
the following figure.  
Image  
adjustment  
for  
digital  
3. Click the Menu again to select the function to be adjusted.  
4. Click Plus or Minus to change current settings.  
5. To exit the OSD window, select “ ” to close and save changes. To change  
other settings, repeat steps 2-4.  
Bright/Contrast  
Phase/Clock Pulse  
Horizontal/Vertical  
Color Temp. Adjustment  
Language Selection  
OSD Setting  
Input Selectio  
Message  
Restore  
Exit  
(Digital)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen  
adjustment  
Function Definition  
Primary Secondary  
Secondary  
directory items  
directory directory  
Description  
symbol  
symbol  
Adjusts the contrast between the foreground  
and background of an image on the screen.  
Adjusts the background brightness of the  
screen.  
Contrast  
Brightness  
Phase  
Adjusts the focus of the image  
(for analog input adjustment only).  
Adjusts the clock pulse of the image  
(for analog input adjustments only).  
Clock pulse  
Moves the image left and right on the screen  
(for analog input adjustments only).  
Horizontal  
Moves the image up and down on the screen  
(for analog input adjustments only).  
Vertical  
Warm color  
temperature  
Cold color  
temperature  
User  
N/A  
N/A  
Sets the color temperature to warm white.  
Sets the color temp to cold white.  
Definition/Red  
User  
Definition/Gree  
n
Adjusts red/green/blue gain.  
User  
Definition/Blue  
English  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Deutsch  
Français  
Español  
Italiano  
Used to select the language you want.  
Hollands  
Suomalainen  
Русский  
Horizontal  
Vertical  
Moves OSD left and right.  
Moves OSD up and down.  
OSD time displayAdjusts OSD time display settings.  
Sets up horizontal, vertical, sequence and  
focusautomatically(foranaloginputonly).  
N/A  
Auto adjustment  
Usedtoselecttheinputsourceyouwant(for  
DVI input only).  
N/A  
N/A  
Analog digital  
Display resolution, H/V frequency and the  
input port used for current input timing  
Message  
function.  
N/A  
N/A  
Restore  
Exit  
Restores system to default settings.  
Closes the OSD window and saves changes.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attachments  
Plug and play  
y TheproductprovidesthelatestVESAplug and playfeaturetoprevent  
complicatedandtime-consuminginstallationprocedures.Theplugand  
play feature allows your computer system to identify the LCD monitor  
easily and set up its functions automatically.  
y The LCD monitor transfers the Extended Display Identification Data  
(EDID) to your computer system via the Display Data Channel (DDC),  
so that your computer can use the self-setting function of the LCD  
monitor.  
y The LCD monitor has a built-in Power Control System (Power Saver).  
y When the LCD monitor is not operated for a period of time, the Power  
Control System automatically sets the system at low voltage status  
to save power. Move the mouse slightly or press any key to return  
to normal operation.  
Power saver  
y The Power Saver function can only be operated by the display card  
ofthecomputersystem.Youcansetupthisfunctionfromyourcomputer.  
y The LCD monitor is compatible with EPAENERGY STAR NÜTEK when used  
with VESA DPMS.  
y To save power and extend the life of the product, turn off the LCD  
monitor power supply when it is idle for a long time or not being  
used.  
Troubleshooting  
Power LED does  
y Check that the power switch is turned on.  
y Make sure the power cable is connected.  
y Check that the power switch is turned on.  
y Make sure the power cable is connected.  
y Ensure that the signal cable is inserted in the receptacle  
appropriately.  
not light  
Icon off  
y The Power Saver may turn off the monitor automatically during the  
operation. Make sure the monitor is restored when you press any key  
from the keyboard.  
Color default  
y Referto"ColorTemp. Adjustment"toadjustRGBcolororselectcolor  
temperatures.  
Instability  
or ripple  
y Remove any electronic equipment in the vicinity that may cause EMI  
interference.  
y Check the signal cable of the monitor to ensure that none of the pins  
are bent.  
Image offset  
or wrong size  
y Presstheautoadjustmentbuttontoautomaticallyoptimizethescreen.  
y Set up the reference position.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical specifications  
Panel dimension  
Diagonal 559 mm (22 inch) LCD monitor  
1,680 x 1,050 / WXGA+  
Up to 16.2 M true color  
Horizontal 0.282mm x Vertical 0.282mm  
300 cd/m2  
Max. resolution  
Max. pixel  
Pixel span  
LCD panel  
(backlight  
source)  
Brightness  
Contrast  
700 : 1  
LC response time  
Visual angle  
Effective display  
5 ms  
Horizontal 170° / Vertical 160°  
Horizontal 473.8 mm x Vertical 296.1 mm  
Simulated video frequency: 0.7 Vpp, 75Ω  
(separate SYNC and composite SYNC)  
Signal mode  
Input signal  
Horizontal 30 kHz – 82 kHz x Vertical 56 Hz – 76  
Hz  
SYNC frequency  
Max. pixel clock  
135MHz  
Input terminal Image  
Power transformer  
D-Sub 15 PIN (VESA) / DVI-D (Optional)  
AC100 – 240 Volts, 50 – 60 Hz  
48W  
Operation mode  
Power  
consumption  
Power saving sleep  
mode  
2W @230VAC 50Hz  
Power saving off mode1W @230VAC 50Hz  
Temperature  
Humidity  
5°C – 35°C (operation) / -20°C – 55°C (storage)  
20% – 80% (operation) / 20% – 85% (storage)  
513.5 x 198.2 x 405.2 mm  
Environmental  
conditions  
Actual dimensions (W x D x H)  
Net weight  
4.9 kg  
TCO03;UL/CUL;TÜV-GS;CE/LVD;TÜV-ERGO;CB;CCC;FCC-B;V  
CCI-B;  
CE/EMC;C-Tick; BSMI; ISO  
Safety standard  
13406-2;EPA;PCT;NOM;WEEE;PSB;HG  
Lamp disposal  
Lamp(s) inside this product contain mercury and must be recycled or disposed of  
according to local, state or federal laws. For more information, contact the  
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal  
information, check www.lamprecycle.org.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
This device complies with Part 15 of the FCC rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference, and  
(2)thisdevicemustacceptanyinterferencereceived, includinginterferencethat  
may cause undesired operation.  
ThisClassBdigitalapparatusmeetsallrequirementsoftheCanadianInterference-  
Causing Equipment Regulations.  
Cet appareil numérique de la class B respecte toures les exigencies du Réglement  
sur le materiel brouilieur du Canada.  
Display modes  
If the signal of your PC system is the same as one of the following reference  
signal modes, the screen will be adjusted automatically. If not, the screen  
will not display or only the LED lights will display. For more information  
about the adjustment mode, refer to the instructions of your display card.  
Hor.  
Frequency  
(kHz)  
Vert.  
Frequency  
(Hz)  
Pixel  
Frequency  
(MHz)  
SYNC Polarity  
(H/V)  
Display Mode  
VESA  
VGA 640x480  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
63.981  
79.976  
55.935  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
60.020  
75.025  
55.887  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
108.000  
135.000  
106.5  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/+  
SVGA 800x600  
XGA 1024x768  
SXGA 1152x864  
SXGA 1280x1024  
WXGA+ 1440x900  
WXGA+ 1680x1050  
720x400  
65.29  
59.954  
70.087  
66.667  
74.500  
74.720  
146.25  
28.322  
30.240  
57.283  
80.000  
-/+  
VGA TEXT  
31.469  
35.000  
49.725  
60.150  
-/+  
-/-  
-/-  
-/-  
Macintosh  
640x480  
832x624  
1024x768  
Download from Www.Somanuals1.c0om. All Manuals Search And Download.  

Allied Telesis Network Router AT AR441S User Manual
Allied Telesis Switch AT GS900 16 User Manual
Altec Lansing Headphones MHP216 User Manual
American Audio Stereo Amplifier XDM 2221 User Manual
American Dryer Corp Clothes Dryer AD 81 III User Manual
A T International Cordless Telephone CL83101 User Manual
Audiovox Remote Starter XR6900 User Manual
Bakers Pride Oven Oven GO 36 User Manual
Barco Projector R5976924 User Manual
Behringer Music Pedal RV600 User Manual