|
24-Port Fast Ethernet Switch
Quick Installation Guide
M73-APO07-460
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
The 24-Port Fast Ethernet 10/100Mbps N-Way Switch provides you a flexible, reliable,
and affordable solution for an Ethernet network. It comes with twenty-four independent
10BASE-T/100BASE-TX ports. Each port delivers up to 200Mbps throughput, and is
able to operate in either half or full-duplex modes.
The 24-Port Fast Ethernet 10/100Mbps N-Way Switch also possesses a N-Way auto-
negotiation function, which automatically adjusts the device for optimum operation.
“Store-and-Forward” architecture filters eliminate error packets and improve efficiency.
Plus, based on Auto-MDI/MDIX technology, you are able to use either a straight through
or a crossover Ethernet cable to connect with other devices. Moreover, the built-in
Universal Power Supply allows you to install the switch easily without any external
power adapter.
Key Features
‧
‧
‧
‧
‧
‧
Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standards
Supports twenty four 10M/100M auto-detect Half/Full duplex switch ports
Supports 802.3x Flow Control pause packet for Full Duplex in case buffer is full
Supports Back Pressure function for Half Duplex operation in case buffer is full
All ports support Auto-negotiation
Supports source/ destination MAC address lookup and aging with 8K MAC address
(4K entries each entry table)
‧
‧
‧
‧
‧
Store -and-Forward switching operation
No-head-of-line blocking system support
Broadcast storm prevention
Built in Universal Power Supply: 90~264V
Emission certification: FCC Class A, CE mark
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS NAMES AND FUNCTIONS
Front Panel: LED Indicators
Status
LED
Color
Solid
Flashing
N/A
Becomes solid green when power is
turned on.
Power
Green
Sending or Receiving
packets
LINK/ACT
Green Successful connection
Rear Panel: Power Port
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE INSTALLATION
The switch is considered as a “plug and play” network device and requires no special
setup procedures. Connect the power cord and cables correctly and you are ready to go.
Switch installation
1.
Put the switch on the appropriate location. When you install the switch, there are
two things needed to be considered:
ŸLocation: Your switch should be located in a place that is central to your
home/office space and allows all computers and networked devices connected to
your switch.
ŸPower: Remember to locate your switch near electrical outlet.
2.
3.
Power on the switch by connecting the power cord.
Verify if the power (POWER) LED is on. If the POWER LED does not light up,
check the power cord and power outlet to verify its connection. If it still remains
unlit, please contact your dealer for support.
Ethernet Port Connection
Connect user machines, servers, another switch, hub, or any other devices to the Ethernet
ports on this switch with either straight through or crossover Ethernet cables.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATION
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control
Standards
Protocol
Ports
CSMA/CD
Twenty four 10/100Mbps RJ-45 Ports (support
Auto-MDI/MDIX)
Switching Scheme Store-and-Forward
Full Duplex: IEEE802.3x
Flow control
Half Duplex: Back Pressure
UTP Category 3 or better (10Base-T)
Cabling type
MAC Address
UTP Category 5 or better (100Base-TX)
8K
Power
Green
LED indicators
Link/Act
Green: on for successful connection,
flashing for activity
Physical
Dimension
438 x 184 x 44mm3 (Width x Depth x Height)
Weight
1.9 kg
Input
specifications
power
AC 90~264V, 50~60Hz
5.3 W
Power
Consumption
Agency
Regulatory
and
FCC Class A, CE mark
0°C to 40°C
Operating
Temperature
Operating Humidity 5~90% non-condensing
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|