AMX Switch UDM 0102 User Manual

Quick Start Guide  
UDM-0102 Endeleo Multi-Format Distribution Mini-Hub  
Overview  
UDM-0102 Specifications (Cont.)  
The UDM-0102 Endeleo Multi-format Distribution Mini-Hub (FG-UDM-0102) is  
designed for small installations with long video/audio cable runs (FIG. 1).  
Power Socket:  
Operating Environment: • 35°F - 95°F (5°C - 35°C)  
• Max. relative humidity - 85% (non-condensing)  
2.1mm barrel-style DC power socket (female)  
ETHERNET port (RJ-45)  
Serial port (RJ-12)  
Status LED  
Dimensions (HWD):  
Weight:  
1.61" x 8.63" x 3.66" (40.89 mm x 219.08 mm x 93.04 mm)  
1.60 lb. (730 g)  
Certifications:  
• CE  
• FCC part 15 Class A  
Source  
Select  
Included Accessories:  
Power Supply, 24VDC, 750 mA with cable (FG-UDM-PS)  
Power LED  
button  
Other AMX Equipment: • HD15 to S-Video Cable (FG-UDM-SVID01)  
• HD15 to 3x RCA Breakout Cable (FG-HD15RCA3F)  
• RS232 DB9/RJ12 Connection Cable (FG-RS01)  
• UDM-RX02 Multi-Format Receiver (FG-UDM-RX02)  
• UDM-RC10 Multi-Format IR Engineering Remote  
Control (FG-UDM-RC10)  
Active input (A/B) LED  
Preset buttons (1/2)  
RJ-45 port for connection  
to an UDM-RX01/02 Receiver  
SPDIF female  
RCA Audio  
Left and Right (B)  
RCA Audio  
Digital Audio  
connector (A)  
Left and Right (A)  
IRTX ports  
• IR01 IR Emitter Module (FG-IR01)  
• IR03 External IR Receiver Module (FG-IR03)  
Audio & Video Formats/Resolutions/Distance  
Audio & Video Formats/Resolutions/Distance  
SPDIF female  
Digital Audio  
connector (B)  
Class  
Format  
Name  
NTSC  
PAL  
Distance (m)  
700  
Distance (ft.)  
2300  
2300  
2300  
2300  
650  
IRRX port  
HD15 female connector (A)  
Composite  
720x480  
HD15 female connector (B)  
720x756  
700  
Power connector  
Component  
720x480  
480p  
576p  
720p  
1080i  
1080p  
VGA  
700  
FIG. 1 UDM-0102 Hub - Front and Rear panel components  
720x756  
700  
Compatibility  
1280x720  
1920x1080  
1920x1080  
640x480  
200  
The UDM-0102 is compatible for use with the UDM-RX02 (FG-UDM-RX02) receiver.  
150  
500  
120  
400  
Product Specifications  
VGA  
200  
650  
UDM-0102 Specifications  
800x600  
SVGA  
XGA  
200  
650  
Power Requirements:  
24VDC @ .75A  
1024x768  
1280x1024  
1600x1200  
200  
650  
Front Panel Components  
SXGA  
UXGA  
150  
500  
120  
400  
Ethernet (RJ-45) port: Provides 10 BaseT network connectivity  
Serial (RJ-12) port  
(labelled “10101”):  
Enables an administrator to control the various functions  
A/V Source Input Connectors  
There are 2 sets of input connectors to the rear panel of the UDM-0102, labelled A and  
B (see FIG. 1) that allow the UDM-0102 to connect to A/V source devices.  
to the UDM-0102 from a command line prompt and  
terminal connection. Requires a DB9-to-RJ12 adapter  
cable (FG-RS01) to connect to a PC.  
Connecting a VGA Video Input  
LEDs:  
The front LEDs are grouped by control type and are  
labeled according to their corresponding port (connector)  
numbers on the rear of the unit.  
1.  
Connect one end of a VGA cable to the source device’s VGA output port.  
2.  
Attach the other end of the cable to the appropriate VIDEO IN connection  
(A or B) on the UDM. For example, connect to the Video In connection on Input  
A of the Hub.  
• Power - device is receiving power  
• A - Source A is currently selected  
• B - Source B is currently selected  
3.  
Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)  
connector.  
• Status - changes from red to green when it receives a  
valid UDP command, and returns to red after 30  
seconds if it has not received anything.  
Note: Ensure Input A is configured as a “VGA Input” and named appropriately within  
the “Inputs” section of the Configuration software. Also ensure the correct Audio Type  
(Analog L/R or S/PDIF) is selected for the relevant input.  
SELECT (A/B)  
Pushbutton:  
Pushbutton switches between Source A / Source B.  
Connecting a Composite Video Input  
1.  
Connect the UDM-HD15RCA3F Breakout Cable (FG-HD15RCA3F, not  
included) to the source device’s Composite output ports:  
PRESETS (1/2)  
Pushbuttons:  
Two pushbuttons execute user-defined presets.  
•A1 = red RCA  
•A2 = green RCA  
•A3 = blue RCA  
UDM (RJ-45) port:  
Provides audio/video transport as well as control via Cat5,  
Cat5e or Cat6 to a UDM-RX02 Receiver.  
Rear Panel Connectors:  
2.  
3.  
Attach the other end of the cable to the appropriate VIDEO IN connection  
(A or B) on the UDM.  
Source Inputs (A, B): Two sets of input connectors for A/V source devices  
(labelled A and B):  
Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)  
connector.  
• VIDEO IN: HD-15 input connector (female) - supports  
VGA, Component, S-Video and Composite formats.  
• Analog Audio: Left (white) and Right (red) stereo RCA  
input connectors (female).  
Connecting a Component Video Input  
1.  
Connect the UDM-HD15RCA3F Breakout Cable (FG-HD15RCA3F, not  
included) to the video source device’s Component video output connectors  
(Red, Green and Blue).  
• Digital Audio: SPDIF (female) input connector.  
2.  
3.  
Attach the other end of the cable to the appropriate VIDEO IN connection  
(A or B) on the UDM.  
IRTX Ports:  
IRRX Port:  
Two 3.5mm stereo IR Transmitter output ports allow up to  
two IR-controlled devices (such as a DVD or VCR player)  
to be controlled via optional wired IR emitters.  
Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)  
connector.  
3.5mm stereo input port, allows connecting an IR receiver  
to allow learning IR commands.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

AAMP of America Speaker SD20 HD20 User Manual
Actiontec electronic Network Router GT704WR User Manual
AG Neovo Flat Panel Television X W19 User Manual
AKG Acoustics Headphones Q 701 User Manual
Alamo Lawn Mower FC FL 0001 User Manual
Altec Lansing Speaker VS2320 User Manual
Alto Shaam Food Warmer HN2 48; HN2SYS 48 User Manual
American Standard Furnace 32 5037 01 User Manual
Audiovox Speaker BP110 User Manual
Barco Laser Pointer 26 0405000 00 User Manual