ALS Industries CD Player DEH P5500MP User Manual

Operation Manual

Mode dꢀemploi

Multi-CD control High power CD/MP3/WMA player

with FM/AM tuner

Syntoniseur FM/AM et lecteur de CD/MP3/WMA,

ꢀPuissance élevéeꢁ, avec contrôleur pour lecteur de

CD à chargeur

DEH-P5500MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

ꢀ

Playing tracks in a random order 26

Scanning CDs and tracks 27

Pausing CD playback 27

Adjusting subwoofer settings 36

Using non fading output 37

ꢀ

Adjusting non fading output level 37

Using ITS playlists 27

Using the high pass filter 37

Adjusting source levels 37

ꢀ

Creating a playlist with ITS

programming 27

ꢀ

Playback from your ITS playlist 28

Initial Settings

ꢀ

Erasing a track from your ITS

playlist 28

Adjusting initial settings 39

Setting the clock 39

ꢀ

Erasing a CD from your ITS

playlist 29

Switching the warning tone 39

Switching the auxiliary setting 39

Switching the dimmer setting 40

Setting the rear output and subwoofer

controller 40

Using disc title functions 29

ꢀ

Entering disc titles 29

Displaying disc titles 30

ꢀ

Selecting discs from the disc title

list 30

Switching the telephone muting/

attenuation 40

Using CD TEXT functions 30

ꢀ

Displaying titles on CD TEXT

Other Functions

discs 30

Scrolling titles in the display 30

Turning the clock display on or off 42

Using the AUX source 42

ꢀ

Using compression and bass emphasis 30

Selecting AUX as the source 42

ꢀ

Setting the AUX title 42

Audio Adjustments

Setting the level indicator 42

Introduction of audio adjustments 32

Compensating for equalizer curves (EQ-

EX) 32

Introduction of XMoperation 43

ꢀ

XMoperation 43

ꢀ

Swiching the XMchannel select

Setting the sound focus equalizer

(SFEQ) 33

setting 43

Using balance adjustment 33

Using the equalizer 34

Additional Information

Understanding built-in CD player error

messages 44

ꢀ

Recalling equalizer curves 34

ꢀ

Adjusting equalizer curves 34

Fine adjusting equalizer curve 34

CD player and care 44

CD-R/CD-RW discs 45

MP3 and WMA files 45

ꢀ

Adjusting bass and treble 35

ꢀ

Adjusting bass and treble level 35

MP3 additional information 46

ꢀ

Selecting bass frequency 35

WMA additional information 46

ꢀ

Selecting treble frequency 36

About folders and MP3/WMA files 46

Terms 47

Adjusting loudness 36

Using subwoofer output 36

Specifications 49

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your

musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your

equipment offers. This manufacturer and the Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of your equipment by playing it at a safe level. One

that lets the sound come through loud and clear without annoying blaring or distortion—and, most

importantly, without affecting your sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of

sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against

this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future. After

all, we want you listening for a lifetime.

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since

hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the

Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged

exposure to excessive noise. This list of sound levels is included for your protection.

Decibel

Level

Example

Quiet library, soft whispers

Living room, refrigerator, bedroom away from traffic

Light traffic, normal conversation, quiet office

Air conditioner at 20 feet, sewing machine

Vacuum cleaner, hair dryer, noisy restaurant

Average city traffic, garbage disposals, alarm clock at two feet

THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE

100

120

140

180

Subway, motorcycle, truck traffic, lawn mower

Garbage truck, chain saw, pneumatic drill

Rock band concert in front of speakers, thunderclap

Gunshot blast, jet plane

Rocket launching pad

Information courtesy of the Deafness Research Foundation.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Before You Start

using this unit. It is especially important that

you read and observe precautions on the next

page and in other sections.

Information to User

Alteration or modifications carried out without

appropriate authorization may invalidate the

userꢁs right to operate the equipment.

After-sales service for

Pioneer products

Please contact the dealer or distributor from

where you purchased this unit for after-sales

service (including warranty conditions) or any

other information. In case the necessary infor-

mation is not available, please contact the

companies listed below:

For Canadian model

This Class B digital apparatus complies with

Canadian ICES-003.

Please do not ship your unit to the companies

at the addresses listed below for repair without

advance contact.

About this unit

The tuner frequencies on this unit are allo-

cated for use in North America. Use in other

areas may result in improper reception.

U.S.A.

Pioneer Electronics (USA) Inc.

CUSTOMER SUPPORT DIVISION

P.O. Box 1760

Long Beach, CA 90801-1760

800-421-1404

Important (Serial number)

The serial number is located on the bottom of

this unit. For your own security and convenience,

be sure to record this number on the enclosed

warranty card.

CANADA

Pioneer Electronics of Canada, Inc.

CUSTOMER SATISFACTION DEPARTMENT

300 Allstate Parkway

Markham, Ontario L3R OP2

(905) 479-4411

1-877-283-5901

About this manual

This unit features a number of sophisticated

functions ensuring superior reception and op-

eration. All the functions have been designed

for the easiest possible use, but many are not

self-explanatory. This operation manual will

help you benefit fully from this productꢁs po-

tential and to maximize your listening enjoy-

ment.

For warranty information please see the Lim-

ited Warranty sheet included with this unit.

We recommend that you familiarize yourself

with the functions and their operation by read-

ing through the manual before you begin

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Before You Start

Product registration

Features

Visit us at the following site:

CD playback

Music CD/CD-R/CD-RW playback is possible.

MP3 file playback

It is possible to play back MP3 files recorded

on CD-ROM/CD-R/CD-RW (ISO9660 Level 1/

Level 2 standard recordings).

of your purchase on file to help you refer to

this information in the event of an insurance

claim such as loss or theft.

Receive updates on the latest products and

technologies.

Download ownerꢁs manuals, order product

catalogues, research new products, and

much more.

Supply of this product only conveys a li-

cense for private, non-commercial use and

does not convey a license nor imply any

right to use this product in any commercial

(i.e. revenue-generating) real time broad-

casting (terrestrial, satellite, cable and/or

any other media), broadcasting/streaming

via internet, intranets and/or other net-

works or in other electronic content distri-

bution systems, such as pay-audio or

audio-on-demand applications. An inde-

pendent license for such use is required.

For details, please visit

Precautions

CAUTION:

http://www.mp3licensing.com.

USE OF CONTROLOR ADJUSTMENT OR

PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

WMA file playback

It is possible to play back WMA files recorded

on CD-ROM/CD-R/CD-RW (ISO9660 Level 1/

Level 2 standard recordings).

CAUTION:

THE USE OF OPTICALINSTRUMENTS

WITH THIS PRODUCT WILL INCREASE

EYE HAZARD.

About WMA

Keep this manual handy as a reference for

operating procedures and precautions.

Always keep the volume low enough so you

can hear sounds outside of the car.

Protect this product from moisture.

If the battery is disconnected or dis-

charged, the preset memory will be erased

and must be reprogrammed.

The Windows Media" logo printed on the box

indicates that this unit can playback the WMA

data.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Before You Start

WMA is short for Windows Media Audio and

refers to an audio compression technology

that is developed by Microsoft Corporation.

WMA data can be encoded by using Windows

Media Player version 7, 7.1 or Windows Media

Player for Windows XP.

Microsoft, Windows Media, and the Windows

logo are trademarks, or registered trademarks

of Microsoft Corporation in the United States

and/or other countries.

CAUTION

Use only one CR2025 (3 V) lithium battery.

Remove the battery if the remote control is not

used for a month or longer.

Do not recharge, disassemble, heat or dispose

of the battery in fire.

Do not handle the battery with metallic tools.

Do not store the battery with metallic materi-

als.

In the event of battery leakage, wipe the re-

mote control completely clean and install a

new battery.

When disposing of used batteries, please

comply with governmental regulations or en-

vironmental public institutionꢁs rules that

apply in your country/area.

Notes

With some applications used to encode WMA

files, this unit may not operate correctly.

With some applications used to encode WMA

files, album names and other text information

may not be correctly displayed.

Using the remote control

Point the remote control in the direction of the

front panel to operate.

Use and care of the remote

control

Installing the battery

Important

Do not store the remote control in high tem-

peratures or direct sunlight.

The remote control may not function properly

in direct sunlight.

Do not let the remote control fall onto the

floor, where it may become jammed under the

brake or accelerator pedal.

Slide the tray out on the back of the remote

control and insert the battery with the plus (+)

and minus (ꢀ) poles pointing in the proper di-

rection.

About the XM READY mark

WARNING

Keep the battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Before You Start

Avoid subjecting the front panel to excessive

shocks.

Keep the front panel out of direct sunlight and

high temperatures.

The XMREADY mark printed on the front

panel indicates that the Pioneer XMtuner

(sold separately) can be controlled by this unit.

Please inquire to your dealer or nearest

authorized Pioneer service station regarding

the XMtuner that can be connected to this

unit. For XMtuner operation, please refer to

the XMtuner owner ꢁs manual.

Removing the front panel

Press OPEN to open the front panel.

Notes

Grip the left side of the front panel and

pull it gently outward.

Take care not to grip it tightly or drop it.

XMSatellite Radio is developing a new band

of radio in the U.S.A.

The system will use direct satellite-to-receiver

broadcasting technology to provide listeners

in their cars and at home with crystal-clear

sound seamlessly from coast to coast. XMwill

create and package up to 100 channels of di-

gital-quality music, news, sports, talk and chil-

drenꢁs programming.

Put the front panel into the protective

case provided for safe keeping.

The XMname and related logos are trade-

marks of XMSatellite Radio Inc.

Attaching the front panel

Replace the front panel by holding it

upright to this unit and clipping it securely

into the mounting hooks.

Protecting your unit from

theft

The front panel can be detached from the

head unit and stored in the protective case

provided to discourage theft.

If the front panel is not detached from the

head unit within five seconds of turning off

the ignition, a warning tone will sound.

You can turn off the warning tone. See

Switching the warning tone on page 39.

Important

Never use force or grip the display and the

buttons tightly when removing or attaching.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Whatꢀs What

b a

7 EQ-EX button

Head unit

1 CLOCK button

Press and hold to switch between EQ-EX

and SFEQ functions. Press to operate each

function.

Press to change to the clock display.

2 VOLUME

8 FUNCTION button

Press to select functions.

When you press VOLUME, it extends out-

ward so that it becomes easier to turn. To re-

tract VOLUME, press it again. Rotate to

increase or decrease the volume.

9 1ꢀ6 buttons

Press for preset tuning and disc number

search when using a multi-CD player.

3 AUDIO button

Press to select various sound quality con-

trols.

a DISPLAY button

Press to select different displays.

4 a/b/c/d buttons

b EQ button

Press to select various equalizer curves.

Press to do manual seek tuning, fast for-

ward, reverse and track search controls.

Also used for controlling functions.

c SOURCE button

This unit is turned on by selecting a source.

Press to cycle through all of the available

sources.

5 OPEN button

Press to open the front panel.

6 BAND button

Press to select among three FMand one

AMbands and cancel the control mode of

functions.

Remote control

Operation is the same as when using the but-

ton on the head unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Whatꢀs What

d VOLUME button

Press to increase or decrease the volume.

e ATT button

Press to quickly lower the volume level, by

about 90%. Press once more to return to the

original volume level.

f TUNER button

Press to select the tuner as the source.

g PAUSE button

Press to turn pause on or off.

h CD button

Press to select the built-in or multi-CD

player as the source.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Power ON/OFF

can be controlled by this unit. When two exter-

Turning the unit on

nal units are connected, the allocation of

them to external unit 1 or external unit 2 is

automatically set by this unit.

When this unitꢁs blue/white lead is connected

to the carꢁs auto-antenna relay control term-

inal, the carꢁs antenna extends when this

unitꢁs source is turned on. To retract the an-

tenna, turn the source off.

Press SOURCE to turn the unit on.

When you select a source the unit is turned

on.

Selecting a source

You can select a source you want to listen to.

To switch to the built-in CD player, load a disc

in this unit (refer to page 15).

Turning the unit off

When using the head unit, press

Press SOURCE and hold until the unit

SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

turns off.

XM tunerꢂTunerꢂTelevisionꢂBuilt-in CD

playerꢂMulti-CD playerꢂExternal unit 1ꢂ

External unit 2ꢂAUX

When using the remote control, press

TUNER or CD to select a source.

Press each button repeatedly to switch be-

tween the following sources:

TUNER: TelevisionꢂTunerꢂXM tunerꢂ

Sources off

CD: Built-in CD playerꢂMulti-CD playerꢂ

Sources off

Notes

In the following cases, the sound source will

not change:

ꢂ When a unit corresponding to each source

is not connected to this unit.

ꢂ When no disc is set in this unit.

ꢂ When no magazine is set in the multi-CD

player.

ꢂ When the AUX (auxiliary input) is set to off

(refer to page 39).

External unit refers to a Pioneer product (such

as one available in the future) that, although

incompatible as a source, enables control of

basic functions by this unit. Two external units

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Tuner

To performmanual tuning, press c or

Listening to the radio

d with quick presses.

The frequencies move up or down step by

step.

To performseek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

4 3

You can cancel seek tuning by pressing either

c or d with a quick press.

If you press and hold c or d you can skip

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

broadcasting stations. Seek tuning starts as soon

as you release the buttons.

1 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

Note

When the frequency selected is being broadcast

in stereo the stereo (5) indicator will light.

2 Preset number indicator

Shows what preset has been selected.

3 Frequency indicator

Shows to which frequency the tuner is

tuned.

4 Signal level indicator

Shows the radio wave strength.

5 Band indicator

Shows which band the radio is tuned to, AM

or FM.

Press SOURCE to select the tuner.

Press SOURCE until you see TUNER dis-

played.

Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2, F3 for FMor AM.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Tuner

frequencies for later recall with the touch of a

button.

Introduction of advanced

tuner operation

When you find a frequency that you

want to store in memory press a preset

tuning button 1ꢀ6 and hold until the preset

number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button 1ꢀ6 the radio station frequency is

recalled from memory.

1 LOC indicator

Shows when local seek tuning is on.

Notes

2 Preset number indicator

Shows what preset has been selected.

Up to 18 FMstations, 6 for each of the three

FMbands, and 6 AMstations can be stored in

memory.

You can also use a and b to recall radio sta-

tion frequencies assigned to preset tuning

buttons 1ꢀ6.

3 Function display

Shows the function status.

Press FUNCTION to display the function

names.

Press FUNCTION repeatedly to switch be-

tween the following functions:

BSM (best stations memory)ꢂLOCAL (local

seek tuning)

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

To return to the frequency display, press

BAND.

Note

Press FUNCTION to select LOCAL.

Press FUNCTION until LOCAL appears in the

display.

If you do not operate the function within about 30

seconds, the display is automatically returned to

the frequency display.

Press a to turn local seek tuning on.

Local seek sensitivity (e.g., LOCAL 2) appears

in the display.

Storing and recalling

broadcast frequencies

Press c or d to set the sensitivity.

There are four levels of sensitivity for FMand

two levels for AM:

If you press any of the preset tuning buttons

1ꢀ6 you can easily store up to six broadcast

FM: LOCAL 1ꢂLOCAL 2ꢂLOCAL 3ꢂ

LOCAL 4

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Tuner

AM: LOCAL 1ꢂLOCAL 2

The LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

When you want to return to normal

seek tuning, press b to turn local seek tun-

ing off.

LOCALOFF appears in the display.

Storing the strongest

broadcast frequencies

BSM(best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 1ꢀ6 and

once stored there you can tune in to those fre-

quencies with the touch of a button.

Press FUNCTION to select BSM.

Press FUNCTION until BSM appears in the

display.

Press a to turn BSM on.

BSM begins to flash. While BSM is flashing

the six strongest broadcast frequencies will be

stored under preset tuning buttons 1ꢀ6 in

order of their signal strength. When finished,

BSM stops flashing.

To cancel the storage process, press b.

Note

Storing broadcast frequencies with BSMmay re-

place broadcast frequencies you have saved

using 1ꢀ6.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Built-in CD Player

Playing a CD

Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

To performfast forward or reverse,

press and hold c or d.

If you select the search method to ROUGH,

pressing and holding c or d enables you to

search every ten track in the current disc. (Refer

to Selecting the search method on page 17.)

These are the basic steps necessary to play a

CD with your built-in CD player. More ad-

vanced CD operation is explained starting on

the next page.

To skip back or forward to another

track, press c or d.

Pressing d skips to the start of the next track.

Pressing c once skips to the start of the cur-

rent track. Pressing again will skip to the pre-

vious track.

1 Play time indicator

Shows the elapsed playing time of the cur-

rent track.

Notes

2 Track number indicator

Shows the track currently playing.

The built-in CD player plays one, standard, 12-

cm or 8-cm (single) CD at a time. Do not use

an adapter when playing 8-cm CDs.

Do not insert anything other than a CD into

the CD loading slot.

If you cannot insert a disc completely or if

after you insert a disc the disc does not play,

check that the label side of the disc is up.

Press EJECT to eject the disc, and check the

disc for damage before inserting the disc

again.

Press OPEN to open the front panel.

CD loading slot appears.

After a CD has been inserted, press SOURCE

to select the built-in CD player.

Insert a CD into the CD loading slot.

Playback will automatically start.

CD loading slot

a and b can be operated when MP3 or WMA

is playing.

If the built-in CD player does not operate prop-

erly, an error message such as ERROR-11

may be displayed. Refer to Understanding

built-in CD player error messages on page 44.

When a CD TEXT disc is inserted, the disc and

track titles begin to scroll to the left auto-

matically.

EJECT button

You can eject a CD by pressing EJECT.

To avoid a malfunction, make sure that no

metal object comes into contact with the term-

inals when the front panel is open.

Close the front panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Built-in CD Player

Press FUNCTION to select RPT.

Introduction of advanced

built-in CD player operation

Press FUNCTION until RPT appears in the dis-

play.

Press a to turn repeat play on.

RPT :ON appears in the display. The track cur-

rently playing will play and then repeat.

Press b to turn repeat play off.

RPT :OFF appears in the display. The track cur-

rently playing will continue to play and then

play the next track.

1 RPT indicator

Shows when repeat play is turned on.

Note

If you perform track search or fast forward/re-

verse, repeat play is automatically cancelled.

2 Function display

Shows the function status.

Press FUNCTION to display the function

names.

Playing tracks in a random

order

Press FUNCTION repeatedly to switch be-

tween the following functions:

RPT (repeat play)ꢂRDM (random play)

ꢂSCAN (scan play)ꢂPAUSE (pause)

ꢂFF/REV (search method)ꢂTAG (tag display)

Random play lets you play back tracks on the

CD in a random order.

To return to the playback display, press BAND.

Press FUNCTION to select RDM.

Press FUNCTION until RDM appears in the

display.

Notes

When playing audio data (CD-DA), it is not ef-

fective even if you turn TAG (tag display) on.

(Refer to page 23.)

If you do not operate the function within about

30 seconds, the display is automatically re-

turned to the playback display.

Press a to turn randomplay on.

RDM :ON appears in the display. Tracks will

play in a random order.

Press b to turn randomplay off.

RDM :OFF appears in the display. Tracks will

continue to play in order.

Repeating play

Repeat play lets you hear the same track over

again.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of

each track on the CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Built-in CD Player

Press FUNCTION to select SCAN.

Selecting the search method

You can switch the search method between

fast forward/reverse and searching every 10

track.

Press FUNCTION until SCAN appears in the

display.

Press a to turn scan play on.

SCAN :ON appears in the display. The first 10

seconds of each track is played.

Press FUNCTION to select FF/REV.

Press FUNCTION until FF/REV appears in the

display.

When you find the desired track press

If the search method ROUGH has been pre-

b to turn scan play off.

SCAN :OFF appears in the display. The track

will continue to play.

viously selected, ROUGH will be displayed.

Press c or d to select the search meth-

If the display has automatically returned to

od.

the playback display, select SCAN again by press-

ing FUNCTION.

Press c or d until the desired search method

appears in the display.

FF/REV ꢀ Fast forward and reverse

ROUGH ꢀ Searching every 10 track

Note

After scanning of a CD is finished, normal play-

back of the tracks will begin again.

Searching every10 track in

the current disc

If a disc contains over 10 tracks, you can

search every 10 track. When a disc contains a

lot of tracks, you can roughly search the track

you want to play.

Pausing CD playback

Pause lets you temporarily stop playback of

the CD.

Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the

display.

Select the search method ROUGH.

Refer to Selecting the search method on this

page.

Press a to turn pause on.

PAUSE:ON appears in the display. Play of the

current track pauses.

Press and hold c or d to search every

10 track in a disc.

If a disc contains less than 10 tracks, pressing

Press b to turn pause off.

and holding d recalls the last track of a disc.

Also, if the remaining number of tracks after

searching every 10 tracks are less than 10, press-

ing and holding d recalls the last track of a disc.

PAUSE:OFF appears in the display. Play will re-

sume at the same point that you turned pause

on.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Built-in CD Player

If a disc contains less than 10 tracks, pressing

Press d to move the cursor to the next

and holding c recalls the first track of a disc.

Also, if the remaining number of tracks after

searching every 10 tracks are less than 10, press-

ing and holding c recalls the first track of a

disc.

character position.

When the letter you want is displayed, press d

to move the cursor to the next position and

then select the next letter. Press c to move

backwards in the display.

Move the cursor to the last position by

pressing d after entering the title.

When you press d one more time, the entered

title is stored in memory.

Using disc title functions

You can input CD titles and display the title.

The next time you insert a CD for which you

have entered a title, the title of that CD will be

displayed.

Press BAND to return to the playback

display.

Notes

Entering disc titles

Disc title input lets you input CD titles up to 8

letters long and up to 48 disc titles into the

built-in CD player.

Titles remain in memory, even after the disc

has been removed from built-in CD player, and

are recalled when the disc is reinserted.

After data for 48 discs has been stored in

memory, data for a new disc will overwrite the

oldest one.

If you connect a multi-CD player, you can

input disc titles for up to 100 discs.

When a multi-CD player that does not support

disc title functions is connected, you cannot

enter disc titles in this unit.

Play a CD that you want to enter the

title.

Press FUNCTION and hold until TITLE IN

appears in the display.

When playing a CD TEXT disc, you cannot

switch to TITLE IN. The disc title will have already

been recorded on a CD TEXT disc.

Displaying disc titles

You can display the title of any disc that has

had a disc title entered.

Press a or b to select a letter of the al-

phabet.

Each press of a will display a letter of the al-

phabet in A B C ... X Y Z, numbers and sym-

bols in 1 2 3 ... > [ ] order. Each press of b will

display a letter in the reverse order, such as Z

Y X ... C B A order.

Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

Play timeꢂDISC TTL (disc title)

When you select DISC TTL, the title of the cur-

rently playing disc is shown in the display.

If no title has been entered for the currently

playing disc, NO TITLE is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Built-in CD Player

Using CD TEXT functions

Some discs have certain information encoded

on the disc during manufacture. These discs

may contain such information as the CD title,

track title, artistꢁs name and playback time

and are called CD TEXT discs. Only these spe-

cially encoded CD TEXT discs support the

functions listed below.

Displaying titles on CD TEXT discs

Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

Play timeꢂDISC TTL (disc title)ꢂART NAME

(disc artist name)ꢂTRK TTL (track title)

ꢂART NAME (track artist name)

If specific information has not been recorded

on a CD TEXT disc, NO XXXX will be displayed

(e.g., NO T-TTL).

Scrolling titles in the display

This unit can display the first 8 letters only of

DISC TTL, ART NAME, TRK TTL and

ART NAME. When the recorded information is

longer than 8 letters, you can scroll the text to

the left so that the rest of the title can be seen.

Press DISPLAY and hold until the title

begins to scroll to the left.

The rest of the title will appear in the dis-

play.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

MP3/WMA Player

Playing a MP3/WMA

CD loading slot

3 4

EJECT button

These are the basic steps necessary to play an

MP3/WMA with your built-in CD player. More

advanced MP3/WMA operation is explained

starting on the next page.

You can eject a CD-ROMby pressing EJECT.

To avoid a malfunction, make sure that no

metal object comes into contact with the term-

inals when the front panel is open.

1 MP3 indicator

Shows when the MP3 file is playing.

Close the front panel.

Use VOLUME to adjust the sound level.

2 Folder number indicator

Shows the folder number currently playing.

Rotate to increase or decrease the volume.

Press a or b to select a folder.

You cannot select a folder that does not have

3 Play time indicator

Shows the elapsed playing time of the cur-

rent track (file).

an MP3/WMA file recorded in it.

To return to folder 01 (ROOT), press and hold

BAND. However, if folder 01 (ROOT) contains no

files, playback commences with folder 02.

4 WMA indicator

Shows when the WMA file is playing.

To performfast forward or reverse,

press and hold c or d.

This is fast forward and reverse operation only

5 Track number indicator

Shows the track (file) currently playing.

If a track number 100 to 199 is selected,

d will light up above the last two digits

of the track number.

for the file being played. This operation is can-

celed when the previous or next file is reached.

pressing and holding c or d enables you to

search every ten track in the current folder. (Refer

to Selecting the search method on page 23.)

If you select the search method to ROUGH,

If a track number 200 or more is selected,

d will blink above the last two digits of

the track number.

Press OPEN to open the front panel.

To skip back or forward to another

CD loading slot appears.

After a CD-ROMhas been inserted, press

SOURCE to select the built-in CD player.

track, press c or d.

Pressing d skips to the start of the next track.

Pressing c once skips to the start of the cur-

rent track. Pressing again will skip to the pre-

vious track.

slot.

Insert a CD-ROM into the CD loading

Playback will automatically start.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

MP3/WMA Player

Introduction of advanced

Notes

built-in CD player (MP3/

WMA) operation

When playing discs with MP3/WMA files and

audio data (CD-DA) such as CD-EXTRA and

MIXED-MODE CDs, both types can be played

only by switching mode between MP3/WMA

and CD-DA with BAND.

If you have switched between playback of

MP3/WMA files and audio data (CD-DA), play-

back starts at the first track on the disc.

The built-in CD player can play back an MP3/

WMA file recorded on CD-ROM. (Refer to

page 45 for files that can be played back.)

Do not insert anything other than a CD into

the CD loading slot.

There is sometimes a delay between starting

up playback and the sound being issued. This

is particularly the case when playing back

multi-session and many folders. When being

read in, FRMTREAD is displayed.

1 RPT indicator

Shows when repeat range is selected to cur-

rent track (file).

2 Function display

Shows the function status.

If you cannot insert a disc completely or if

after you insert a disc the disc does not play,

check that the label side of the disc is up.

Press EJECT to eject the disc, and check the

disc for damage before inserting the disc

again.

Playback is carried out in order of file number.

Folders are skipped if they contain no files. (If

folder 01 (ROOT) contains no files, playback

commences with folder 02.)

Press FUNCTION to display the function

names.

Press FUNCTION repeatedly to switch be-

tween the following functions:

RPT (repeat play)ꢂRDM (random play)

ꢂSCAN (scan play)ꢂPAUSE (pause)

ꢂFF/REV (search method)ꢂTAG (tag display)

To return to the playback display, press BAND.

When playing back files recorded as VBR

(variable bit rate) files, the play time will not be

correctly displayed if fast forward or reverse

operations are used.

Note

If you do not operate the function within about 30

seconds, the display is automatically returned to

the playback display.

If inserted disc contains no files that can be

played back, NO AUDIO is displayed.

There is no sound on fast forward or reverse.

If the built-in CD player does not operate prop-

erly, an error message such as ERROR-11

may be displayed. Refer to Understanding

built-in CD player error messages on page 44.

When an MP3/WMA disc is inserted, folder

name and file name begin to scroll to the left

automatically.

Repeating play

For MP3/WMA playback, there are three re-

peat play ranges: FLD (folder repeat), TRK

(one-track repeat) and DSC (repeat all tracks).

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

MP3/WMA Player

Press FUNCTION to select RPT.

Note

Press FUNCTION until RPT appears in the dis-

If you turn random play on during FLD and then

return to the playback display, FRDM appears in

the display.

play.

Press c or d to select the repeat range.

Press c or d until the desired repeat range ap-

pears in the display.

FLD ꢀ Repeat the current folder

TRK ꢀ Repeat just the current track

DSC ꢀ Repeat all tracks

Scanning folders and tracks

While you are using FLD, the beginning of

each track in the selected folder plays for

about 10 seconds. When you are using DSC,

the beginning of the first track of each folder

is played for about 10 seconds.

Notes

If you select other folder during repeat play,

the repeat play range changes to DSC.

If you perform track search or fast forward/re-

verse during TRK, the repeat play range

changes to FLD.

Select the repeat range.

Refer to Repeating play on the previous page.

When FLD is selected, it is not possible to play

back a subfolder of that folder.

Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the

display.

Press a to turn scan play on.

Playing tracks in a random

order

Random play lets you play back tracks in a

random order within the repeat range, FLD

and DSC.

SCAN :ON appears in the display. The first 10

seconds of each track of the current folder (or

the first track of each folder) is played.

When you find the desired track (or

folder) press b to turn scan play off.

SCAN :OFF appears in the display. The track

(or folder) will continue to play.

Select the repeat range.

Refer to Repeating play on the previous page.

If the display has automatically returned to

the playback display, select SCAN again by press-

ing FUNCTION.

Press FUNCTION to select RDM.

Press FUNCTION until RDM appears in the

display.

Notes

Press a to turn randomplay on.

After track or folder scanning is finished, nor-

mal playback of the tracks will begin again.

If you turn scan play on during FLD and then

return to the playback display, FSCN appears

in the display.

RDM :ON appears in the display. Tracks will

play in a random order within the previously

selected FLD or DSC ranges.

Press b to turn randomplay off.

RDM :OFF appears in the display. Tracks will

continue to play in order.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

MP3/WMA Player

Pausing MP3/WMA playback

Pause lets you temporarily stop playback of

the MP3/WMA.

Searching every10 track in

the current folder

If the current folder contains over 10 tracks,

you can search every 10 track. When the one

folder contains a lot of tracks, you can roughly

search the track you want to play.

Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the

display.

Select the search method ROUGH.

Press a to turn pause on.

Refer to Selecting the search method on this

page.

PAUSE:ON appears in the display. Play of the

current track pauses.

Press and hold c or d to search every

10 track in the current folder.

If the current folder contains less than 10

Press b to turn pause off.

PAUSE:OFF appears in the display. Play will re-

sume at the same point that you turned pause

on.

tracks, pressing and holding d recalls the last

track of the folder. Also, if the remaining number

of tracks after searching every 10 tracks are less

than 10, pressing and holding d recalls the last

track of the folder.

Selecting the search method

You can switch the search method between

fast forward/reverse and searching every 10

track.

If the current folder contains less than 10

tracks, pressing and holding c recalls the first

track of the folder. Also, if the remaining number

of tracks after searching every 10 tracks are less

than 10, pressing and holding c recalls the first

track of the folder.

Press FUNCTION to select FF/REV.

Press FUNCTION until FF/REV appears in the

display.

If the search method ROUGH has been pre-

Switching the tag display

viously selected, ROUGH will be displayed.

It is possible to turn the tag display on or off, if

MP3/WMA disc contains the text information

such as track title and artist name.

od.

Press c or d to select the search meth-

Press c or d until the desired search method

appears in the display.

If you turn the tag display off, time to play-

back will be shorter than when this func-

tion is turned on.

FF/REV ꢀ Fast forward and reverse

ROUGH ꢀ Searching every 10 track

Press FUNCTION to select TAG.

Press FUNCTION until TAG appears in the dis-

play.

Press a to turn tag display on.

TAG :ON appears in the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

MP3/WMA Player

Press b to turn tag display off.

corded information is longer than 8 letters,

you can scroll the text to the left so that the

rest of the text information can be seen.

TAG :OFF appears in the display.

Note

Press DISPLAY and hold until the text

When you turn the tag display on, this unit re-

turns to the beginning of the current track in

order to read the text information.

information begins to scroll to the left.

The rest of the text information will appear in

the display.

Displaying text information

on MP3/WMA disc

Text information recorded on a MP3/WMA

disc can be displayed.

Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

Play timeꢂFOLDER (folder name)ꢂFILE (file

name)ꢂTRK TTL (track title)ꢂART NAME (ar-

tist name)ꢂALBM TTL (album title)

ꢂCOMMENT (comment)ꢂBit rate

When playing back files recorded as VBR

(variable bit rate) files, the bit rate value is not dis-

played even after switching to bit rate.

When you have turned tag display off, you

cannot switch to TRK TTL, ART NAME,

ALBM TTL and COMMENT.

If specific information has not been recorded

on a MP3/WMA disc, NO XXXX will be displayed

(e.g., NO NAME).

With some applications used to encode WMA

files, album names and other text information

may not be correctly displayed.

Scrolling text information

in the display

This unit can display the first 8 letters only of

FOLDER, FILE, TRK TTL, ART NAME,

ALBM TTL and COMMENT. When the re-

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Multi-CD Player

Playing a CD

To performfast forward or reverse,

press and hold c or d.

To skip back or forward to another

track, press c or d.

Pressing d skips to the start of the next track.

Pressing c once skips to the start of the cur-

rent track. Pressing again will skip to the pre-

vious track.

You can use this unit to control a multi-CD

player, which is sold separately.

Notes

These are the basic steps necessary to play a

CD with your multi-CD player. More advanced

CD operation is explained starting on the next

page.

When the multi-CD player performs the pre-

paratory operations, READY is displayed.

If the multi-CD player does not operate prop-

erly, an error message such as ERROR-11

may be displayed. Refer to the multi-CD player

ownerꢁs manual.

If there are no discs in the multi-CD player ma-

gazine, NO DISC is displayed.

When you select a CD TEXT disc on a CD TEXT

compatible multi-CD player, the disc and track

titles begin to scroll to the left auto-

matically.

1 Disc number indicator

Shows the disc currently playing.

2 Play time indicator

Shows the elapsed playing time of the cur-

rent track.

3 Track number indicator

Shows the track currently playing.

Press SOURCE to select the multi-CD

50-disc multi-CD player

player.

Only those functions described in this manual

Press SOURCE until you see MULTI CD dis-

are supported for 50-disc multi-CD players.

played.

Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

Select a disc you want to listen to with

the 1ꢀ6 buttons.

For discs located at 1 to 6, press the corre-

sponding number button.

If you want to select a disc located at 7 to 12,

press and hold the corresponding numbers

such as 1 for disc 7, until the disc number ap-

pears in the display.

You can also sequentially select a disc by

pressing a/b.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Multi-CD Player

Press FUNCTION to select RPT.

Introduction of advanced

multi-CD player operation

Press FUNCTION until RPT appears in the dis-

play.

Press c or d to select the repeat range.

Press c or d until the desired repeat range ap-

pears in the display.

MCD ꢀ Repeat all discs in the multi-CD

player

TRK ꢀ Repeat just the current track

DSC ꢀ Repeat the current disc

Notes

1 RPT indicator

Shows when repeat range is selected to cur-

rent track.

If you select other discs during repeat play,

the repeat play range changes to MCD.

If you perform track search or fast forward/re-

verse during TRK, the repeat play range

changes to DSC.

2 Function display

Shows the function status.

Press FUNCTION to display the function

names.

Press FUNCTION repeatedly to switch be-

tween the following functions:

RPT (repeat play)ꢂLIST (disc title list)ꢂRDM

(random play)ꢂSCAN (scan play)ꢂITS-P (ITS

play)ꢂPAUSE (pause)ꢂCOMP (compression

and DBE)

Playing tracks in a random

order

Random play lets you play back tracks in a

random order within the repeat range, MCD

and DSC.

To return to the playback display, press BAND.

Select the repeat range.

Refer to Repeating play on this page.

Note

If you do not operate the function within about 30

seconds, the display is automatically returned to

the playback display.

Press FUNCTION to select RDM.

Press FUNCTION until RDM appears in the

display.

Press a to turn randomplay on.

RDM :ON appears in the display. Tracks will

play in a random order within the previously

selected MCD or DSC ranges.

Repeating play

There are three repeat play ranges for the

multi-CD player: MCD (multi-CD player re-

peat), TRK (one-track repeat) and DSC (disc re-

peat).

Press b to turn randomplay off.

RDM :OFF appears in the display. Tracks will

continue to play in order.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Multi-CD Player

Pausing CD playback

Note

Pause lets you temporarily stop playback of

the CD.

If you turn random play on during DSC and then

return to the playback display, DRDM appears in

the display.

Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the

display.

Scanning CDs and tracks

Press a to turn pause on.

While you are using DSC, the beginning of

each track on the selected disc plays for about

10 seconds. When you are using MCD, the be-

ginning of the first track of each disc is played

for about 10 seconds.

PAUSE:ON appears in the display. Play of the

current track pauses.

Press b to turn pause off.

PAUSE:OFF appears in the display. Play will re-

sume at the same point that you turned pause

on.

Select the repeat range.

Refer to Repeating play on the previous page.

Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the

display.

Using ITS playlists

ITS (instant track selection) lets you make a

playlist of favorite tracks from those in the

multi-CD player magazine. After you have

added your favorite tracks to the playlist you

can turn on ITS play and play just those selec-

tions.

Press a to turn scan play on.

SCAN :ON appears in the display. The first 10

seconds of each track of the current disc (or

the first track of each disc) is played.

When you find the desired track (or

disc) press b to turn scan play off.

SCAN :OFF appears in the display. The track

(or disc) will continue to play.

Creating a playlist with ITS

programming

You can use ITS to enter and playback up to 99

tracks per disc, up to 100 discs (with the disc

title). (With multi-CD players sold before the

CDX-P1250 and CDX-P650, up to 24 tracks can

be stored in the playlist.)

If the display has automatically returned to

the playback display, select SCAN again by press-

ing FUNCTION.

Notes

After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

If you turn scan play on during DSC and then

return to the playback display, DSCN appears

in the display.

Play a CD that you want to program.

Press a or b to select a CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Multi-CD Player

If no tracks in the current range are pro-

Press FUNCTION and hold until TITLE IN

grammed for ITS play then EMPTY is displayed.

appears in the display, then press

FUNCTION to select ITS.

Press b to turn ITS play off.

After TITLE IN is displayed, press FUNCTION

repeatedly, the following functions appear in

the display:

TITLE IN (disc title input)ꢂITS (ITS program-

ming)

ITS-P:OFF appears in the display. Playback will

continue in normal order from the currently

playing track and CD.

Select a desired track by pressing c or

Erasing a track from your ITS

playlist

When you want to delete a track from your ITS

playlist, you can if ITS play is on.

If ITS play is already on, skip to step 2. If ITS

play is not already on, press FUNCTION.

Press a to store the currently playing

track in the playlist.

ITS IN is displayed briefly and the currently

playing selection is added to your playlist. The

display then shows ITS again.

Play a CD you want to delete a track

fromyour ITS playlist, and turn ITS play on.

Refer to Playback from your ITS playlist on this

page.

Press BAND to return to the playback

display.

Note

Press FUNCTION and hold until TITLE IN

appears in the display, then press

FUNCTION to select ITS.

After TITLE IN is displayed, press FUNCTION

until ITS appears in the display.

After data for 100 discs has been stored in mem-

ory, data for a new disc will overwrite the oldest

one.

Select a desired track by pressing c or

Playback from your ITS playlist

ITS play lets you listen to the tracks that you

have entered into your ITS playlist. When you

turn on ITS play, tracks from your ITS playlist

in the multi-CD player will begin to play.

Press b to erase a track fromyour ITS

playlist.

The currently playing selection is erased from

your ITS playlist and playback of the next track

from your ITS playlist begins.

Select the repeat range.

Refer to Repeating play on page 26.

If there are no tracks from your playlist in the

current range, EMPTY is displayed and normal

play resumes.

Press FUNCTION to select ITS-P.

Press FUNCTION until ITS-P appears in the

display.

Press BAND to return to the playback

display.

Press a to turn ITS play on.

ITS-P:ON appears in the display. Playback be-

gins of those tracks from your playlist within

the previously selected MCD or DSC ranges.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Multi-CD Player

TITLE IN (disc title input)ꢂITS (ITS program-

ming)

Erasing a CD from your ITS playlist

When you want to delete all tracks of a CD

from your ITS playlist, you can if ITS play is off.

When playing a CD TEXT disc on a CD TEXT

compatible multi-CD player, you cannot switch to

TITLE IN. The disc title will have already been re-

corded on a CD TEXT disc.

Play a CD that you want to delete.

Press a or b to select a CD.

Press a or b to select a letter of the al-

Press FUNCTION and hold until TITLE IN

phabet.

appears in the display, then press

FUNCTION to select ITS.

After TITLE IN is displayed, press FUNCTION

until ITS appears in the display.

Each press of a will display a letter of the al-

phabet in A B C ... X Y Z, numbers and sym-

bols in 1 2 3 ... > [ ] order. Each press of b will

display a letter in the reverse order, such as Z

Y X ... C B A order.

Press b to erase all tracks on the cur-

rently playing CD fromyour ITS playlist.

All tracks on the currently playing CD are

erased from your playlist and ITS CLR is dis-

played.

Press d to move the cursor to the next

Press BAND to return to the playback

character position.

display.

When the letter you want is displayed, press d

to move the cursor to the next position and

then select the next letter. Press c to move

backwards in the display.

Using disc title functions

You can input CD titles and display the title.

Then you can easily search for and select a de-

sired disc for play.

Move the cursor to the last position by

pressing d after entering the title.

When you press d one more time, the entered

title is stored in memory.

Entering disc titles

Disc title input lets you input CD titles up to 8

letters long and up to 100 disc titles (with ITS

playlist) into the multi-CD player.

Press BAND to return to the playback

display.

Notes

title.

Play a CD that you want to enter the

Titles remain in memory, even after the disc

has been removed from the magazine, and

are recalled when the disc is reinserted.

After data for 100 discs has been stored in

memory, data for a new disc will overwrite the

oldest one.

Press a or b to select a CD.

Press FUNCTION and hold until TITLE IN

appears in the display.

After TITLE IN is displayed, press FUNCTION

repeatedly, the following functions appear in

the display:

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Multi-CD Player

cially encoded CD TEXT discs support the

functions listed below.

Displaying disc titles

You can display the title of any disc that has

had a disc title entered.

Displaying titles on CD TEXT discs

Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

Play timeꢂDISC TTL (disc title)

Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

When you select DISC TTL, the title of the cur-

rently playing disc is shown in the display.

Play timeꢂDISC TTL (disc title)ꢂART NAME

(disc artist name)ꢂTRK TTL (track title)

ꢂART NAME (track artist name)

If no title has been entered for the currently

playing disc, NO TITLE is displayed.

If specific information has not been recorded

on a CD TEXT disc, NO XXXX will be displayed

(e.g., NO T-TTL).

Selecting discs from the disc

title list

Disc title list lets you see the list of disc titles

that have been entered into the multi-CD

player and select one of them to playback.

Scrolling titles in the display

This unit can display the first 8 letters only of

DISC TTL, ART NAME, TRK TTL and

ART NAME. When the recorded information is

longer than 8 letters, you can scroll the text to

the left so that the rest of the title can be seen.

Press FUNCTION to select LIST.

Press FUNCTION until LIST appears in the dis-

play.

Press DISPLAY and hold until the title

begins to scroll to the left.

The rest of the title will appear in the dis-

play.

Press c or d to scroll through the list of

titles that have been entered.

If no title has been entered for a disc, title is

not displayed.

Press a to play your favorite CD title.

Using compression and

bass emphasis

That selection will begin to play.

You can use these functions only with a multi-

CD player that supports them.

Using CD TEXT functions

You can use these functions only with a CD

TEXT compatible multi-CD player.

Some discs have certain information encoded

on the disc during manufacture. These discs

may contain such information as the CD title,

track title, artistꢁs name and playback time

and are called CD TEXT discs. Only these spe-

Using COMP (compression) and DBE (dy-

namic bass emphasis) functions let you adjust

the sound playback quality of the multi-CD

player. Each of the functions have a two-step

adjustment. The COMP function balances the

output of louder and softer sounds at higher

volumes. DBE boosts bass levels to give play-

back a fuller sound. Listen to each of the ef-

fects as you select through them and use the

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Multi-CD Player

one that best enhances the playback of the

track or CD that you are listening to.

Press FUNCTION to select COMP.

Press FUNCTION until COMP appears in the

display.

If the multi-CD player does not support

COMP/DBE, NO COMP is displayed when you at-

tempt to select it.

Press a or b to select your favorite set-

ting.

Press a or b repeatedly to switch between the

following settings:

COMP OFFꢂCOMP 1ꢂCOMP 2ꢂ

COMP OFFꢂDBE 1ꢂDBE 2

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Audio Adjustments

Section

ꢂHPF (high pass filter)ꢂSLA (source level ad-

justment)

Introduction of audio

adjustments

If EQ-EX function has been selected and only

when EQ-EX is turned on and CUSTOM is se-

lected as the equalizer curve, you can switch to

1 2

When the subwoofer controller setting is only

P/O :FUL, you cannot switch to SUB, W. (Refer to

page 40.)

You can select the 80: 0 only when subwoofer

output is turned on in the SUB, W.

When the subwoofer controller setting is only

6 5

P/O :FUL, you can switch to the non fading out-

put on/off setting. (Refer to page 40.)

1 SFEQ indicator

Appears in the display when SFEQ function

can be activated.

You can select the non fading output setting

only when non fading output is turned on in the

non fading output on/off setting.

2 Loudness indicator

Appears in the display when loudness is

turned on.

When selecting the FMtuner as the source,

you cannot switch to SLA.

To return to the display of each source, press

BAND.

3 SW indicator

Shows when the subwoofer output is turned

on.

Note

If you do not operate the audio function within

about 30 seconds, the display is automatically re-

turned to the source display.

4 Audio display

Shows the audio adjustments status.

5 EQ-EX indicator

Appears in the display when EQ-EX function

can be activated.

Compensating for

equalizer curves (EQ-EX)

6 CUSTOM indicator

The EQ-EX compensates for each equalizer

curve. Furthermore, you can adjust bass and

treble for each source when CUSTOM curve is

selected.

Shows when custom equalizer curve is pre-

sently selected.

Press AUDIO to display the audio func-

If SFEQ has been previously selected, press

EQ-EX and hold to switch to EQ-EX and

EQ-EX appears in the display.

tion names.

Press AUDIO repeatedly to switch between

the following audio functions:

FAD (balance adjustment)ꢂEQ (equalizer

curve adjustment)ꢂB (bass and treble level

adjustment)ꢂLOUD (loudness)ꢂSUB, W

(subwoofer on/off setting)/NOFAD (non fading

output on/off setting)ꢂ80: 0 (subwoofer set-

ting)/NOFAD (non fading output setting)

Press EQ-EX to turn EQ-EX on.

EQ-EX:ON appears in the display. EQ-EX is

now on.

To turn EQ-EX off, press EQ-EX.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Audio Adjustments

HPF function on after selecting the SFEQ set-

ting, you can combine HPF function with

SFEQ function.

Setting the sound focus

equalizer (SFEQ)

Clarifying the sound image of vocals and in-

struments allows the simple staging of a nat-

ural, pleasant sound environment. Even

greater listening enjoyment will be obtained if

seating positions are chosen carefully. FRT1

boosts the treble on the front output and the

bass on the rear output. FRT2 boosts the treble

and the bass on the front output and the bass

on the rear output. (The bass boost is the

same for both front and rear.) For both FRT1

and FRT2, H setting provides a more pro-

nounced effect than L setting.

Using balance adjustment

You can select a fader/balance setting that

provides an ideal listening environment in all

occupied seats.

Press AUDIO to select FAD.

Press AUDIO until FAD appears in the display.

If the balance setting has been previously ad-

justed, BAL will be displayed.

Press a or b to adjust front/rear speak-

Press EQ-EX and hold to switch to SFEQ

er balance.

function.

Each press of a or b moves the front/rear

speaker balance towards the front or the rear.

FAD :F15 ꢀ FAD :R15 is displayed as the front/

rear speaker balance moves from front to rear.

Press EQ-EX and hold until SFEQ indicator ap-

pears in the display.

To switch to EQ-EX function, press EQ-EX and

hold.

FAD : 0 is the proper setting when only two

speakers are used.

When the rear output setting is R-SP :S/W,

Press EQ-EX to select the desired SFEQ

setting.

Press EQ-EX repeatedly to switch between the

following settings:

FRT1-H (front 1-high)ꢂFRT1-L (front 1-low)

ꢂFRT2-H (front 2-high)ꢂFRT2-L (front 2-low)

ꢂCUSTOM (custom)ꢂSFEQ OFF (off)

you cannot adjust front/rear speaker balance.

Refer to Setting the rear output and subwoofer

controller on page 40.

Press c or d to adjust left/right speaker

balance.

Press c or d to select the desired posi-

When you press c or d, BAL : 0 is displayed.

Each press of c or d moves the left/right

speaker balance towards the left or the right.

BAL : L9 ꢀ BAL : R9 is displayed as the left/

right speaker balance moves from left to

right.

tion.

Press c or d until the desired position ap-

pears in the display.

L (left)ꢂC (center)ꢂR (right)

Notes

If you adjust the bass or treble, CUSTOM

memorizes an SFEQ setting in which the bass

and treble are adjusted for personal prefer-

ence.

If you switch the SFEQ setting, the HPF func-

tion is automatically turned off. By turning the

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Audio Adjustments

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

Using the equalizer

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

Press AUDIO to select EQ.

Press AUDIO until EQ appears in the display.

Recalling equalizer curves

There are six stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Press c or d to select the equalizer

band to adjust.

Each press of c or d selects equalizer bands

in the following order:

Display

Equalizer curve

EQ-L (low)ꢂEQ-M (mid)ꢂEQ-H (high)

SPR-BASS

Super bass

Press a or b to adjust the level of the

POWERFUL Powerful

equalizer band.

NATURAL

VOCAL

Natural

Vocal

Each press of a or b increases or decreases

the level of the equalization band.

+6 ꢀ ꢀ6 is displayed as the level is increased

or decreased.

CUSTOM

EQ FLAT

Custom

Flat

You can then select another band and adjust

the level.

CUSTOM is an adjusted equalizer curve

that you create.

Note

A separate CUSTOM curve can be created

for each source. (The built-in CD player and

the multi-CD player are set to the same

equalizer adjustment setting automati-

cally.) If you make adjustments, the equali-

zer curve settings will be memorized in

CUSTOM.

When EQ FLAT is selected no supplement

or correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

EQ FLAT and a set equalizer curve.

If you make adjustments, CUSTOM curve is up-

dated.

Fine adjusting equalizer curve

You can adjust the center frequency and the Q

factor (curve characteristics) of each currently

selected curve band (EQ-L/EQ-M/EQ-H).

Level (dB)

Q=2W

Q=2N

Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizer:

SPR-BASSꢂPOWERFULꢂNATURALꢂ

VOCALꢂCUSTOMꢂEQ FLAT

Center frequency

Frequency (Hz)

Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80:Q1W) appears

in the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Audio Adjustments

Press AUDIO to select the band for ad-

If SFEQ has been set to FRT1 or FRT2, tre-

ble adjustment affects only the front out-

put: rear output cannot be adjusted.

justment from among low, mid and high.

Press AUDIO repeatedly to switch between

the following functions:

LowꢂMidꢂHighꢂB (bass adjustment)ꢂT

(treble adjustment)

Adjusting bass and treble level

You can adjust the bass and treble level.

If EQ-EX function has been selected and only

when EQ-EX is turned on and CUSTOM is se-

lected as the equalizer curve, you can switch to B

and T.

Press AUDIO to select B.

Press AUDIO until B appears in the display.

If the treble level has been previously ad-

justed, T will be displayed.

Press c or d to select the desired fre-

quency.

Press c or d until the desired frequency ap-

pears in the display.

Low: 40ꢂ80ꢂ100ꢂ160 (Hz)

Mid: 200ꢂ500ꢂ1kꢂ2k (Hz)

High: 3kꢂ8kꢂ10kꢂ12k (Hz)

Press c or d to select bass or treble.

Press c and B is displayed. Press d and T is

displayed.

Press a or b to adjust the level.

Each press of a or b increases or decreases

the selected bass or treble level. +6 ꢀ ꢀ6 is dis-

played as the level is increased or decreased.

tor.

Press a or b to select the desired Q fac-

Press a or b until the desired Q factor ap-

pears in the display.

2Nꢂ1Nꢂ1Wꢂ2W

Selecting bass frequency

You can select the bass frequency for level ad-

justment.

Note

If you make adjustments, CUSTOM curve is up-

dated.

Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80:Q1W) appears

in the display.

Press AUDIO to select B.

Adjusting bass and treble

You can adjust bass and treble settings.

Press AUDIO until B appears in the display.

If EQ-EX function has been selected and

only when EQ-EX is turned on and

CUSTOM is selected as the equalizer

curve, you can adjust bass and treble set-

tings.

If SFEQ has been set to FRT1, bass adjust-

ment affects only the rear output: front out-

put cannot be adjusted.

Press c or d to select the desired fre-

quency.

Press c or d until the desired frequency ap-

pears in the display.

40ꢂ63ꢂ100ꢂ160 (Hz)

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Audio Adjustments

Section

Selecting treble frequency

You can select the treble frequency for level

adjustment.

Using subwoofer output

This unit is equipped with a subwoofer output

which can be turned on or off.

Press AUDIO and hold until frequency

Press AUDIO to select SUB, W.

and the Q factor (e.g., F- 80:Q1W) appears

in the display.

Press AUDIO until SUB, W appears in the dis-

play.

When the subwoofer controller setting is

Press AUDIO to select T.

P/O :FUL, you cannot select SUB, W.

Press AUDIO until T appears in the display.

Press a to turn subwoofer output on.

Press c or d to select the desired fre-

SUB, W:NOR appears in the display. Subwoo-

fer output is now on.

the reverse, SUB, W:REV will be displayed.

quency.

Press c or d until the desired frequency ap-

pears in the display.

2kꢂ4kꢂ6kꢂ10k (Hz)

If the subwoofer output phase has been set to

To turn subwoofer output off, press b.

Press c or d to select the phase of sub-

woofer output.

Press c to select reverse phase and REV ap-

pears in the display. Press d to select normal

phase and NOR appears in the display.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

Press AUDIO to select LOUD.

Adjusting subwoofer settings

Press AUDIO until LOUD appears in the dis-

play.

When the subwoofer output is on, you can ad-

just the cut-off frequency and the output level

of the subwoofer.

Press a to turn loudness on.

Loudness level (e.g., LOUD :MID) appears in

the display.

Press AUDIO to select 80: 0.

Press AUDIO until 80: 0 appears in the dis-

Press c or d to select a desired level.

play.

Each press of c or d selects level in the fol-

lowing order:

When the subwoofer output is on, you can se-

lect 80: 0.

LOW (low)ꢂMID (mid)ꢂHI (high)

If the subwoofer setting has been previously

adjusted, the frequency of that previously se-

Press b to turn loudness off.

lected will be displayed instead of 80.

LOUD :OFF appears in the display.

Press c or d to select cut-off frequency.

Each press of c or d selects cut-off frequen-

cies in the following order:

50ꢂ80ꢂ125 (Hz)

Only frequencies lower than those in the se-

lected range are output from the subwoofer.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Audio Adjustments

Press a or b to adjust the output level

Using the high pass filter

of the subwoofer.

When you do not want low sounds from the

subwoofer output frequency range to play

from the front or rear speakers, turn the HPF

(high pass filter) on. Only frequencies higher

than those in the selected range are output

from the front or rear speakers.

Each press of a or b increases or decreases

the level of the subwoofer. +6 ꢀ ꢀ6 is displayed

as the level is increased or decreased.

Using non fading output

Press AUDIO to select HPF.

When the non fading output setting is on, the

audio signal does not pass through this unitꢁs

low pass filter (for the subwoofer), but is out-

put through the RCA output.

Press AUDIO until HPF appears in the display.

Press a to turn high pass filter on.

HPF : 80 appears in the display. High pass fil-

ter is now on.

Press AUDIO to select non fading out-

If the high pass filter has been previously ad-

put on/off setting.

justed, the frequency of that previously selected

Press AUDIO until NOFAD:ON appears in the

will be displayed instead of HPF : 80.

display.

To turn high pass filter off, press b.

When the subwoofer controller setting is only

P/O :FUL, you can switch to the non fading out-

Press c or d to select cut-off frequency.

put on/off setting. (Refer to page 40.)

Each press of c or d selects cut-off frequen-

cies in the following order:

Press a to turn non fading output on.

50ꢂ80ꢂ125 (Hz)

NOFAD:ON appears in the display. Non fading

output is now on.

Only frequencies higher than those in the se-

lected range are output from the front or rear

speakers.

To turn non fading output off, press b.

Note

Adjusting non fading output level

If you switch the SFEQ setting, the HPF function

is automatically turned off. By turning the HPF

function on after selecting the SFEQ setting, you

can combine HPF function with SFEQ

function.

When the non fading output is on, you can ad-

just the level of non fading output.

Press AUDIO to select non fading out-

put setting.

Press AUDIO until NOFAD: 0 appears in the

display.

Adjusting source levels

Press a or b to adjust the output level

of the non fading.

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

Each press of a or b increases or decreases

the level of the non fading. +6 ꢀ ꢀ6 is displayed

as the level is increased or decreased.

Settings are based on the volume level of

the FMtuner, which remains unchanged.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Audio Adjustments

Section

Compare the FM tuner volume level

with the level of the source you wish to ad-

just.

Press AUDIO to select SLA.

Press AUDIO until SLA appears in the display.

Press a or b to adjust the source vo-

lume.

Each press of a or b increases or decreases

the source volume.

SLA : +4 ꢀ SLA : ꢀ4 is displayed as the source

volume is increased or decreased.

Notes

Since the FMtuner volume is the control, it is

not possible to apply source level adjustments

to the FMtuner.

The AMtuner volume level can also be ad-

justed with source level adjustments.

The built-in CD player and the multi-CD player

are set to the same source level adjustment

volume automatically.

External unit 1 and external unit 2 are set to

the same source level adjustment volume

automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Initial Settings

Press c or d to select the segment of

Adjusting initial settings

the clock display you wish to set.

Pressing c or d will select one segment of the

clock display:

HourꢂMinute

As you select segments of the clock display

the segment selected will blink.

Initial settings lets you perform initial set up of

different settings for this unit.

Press a or b to set the clock.

1 Function display

Pressing a will increase the selected hour or

minute. Pressing b will decrease the selected

hour or minute.

Shows the function status.

Press SOURCE and hold until the unit

turns off.

Press FUNCTION and hold until the

clock appears in the display.

Switching the warning tone

If the front panel is not detached from the

head unit within five seconds of turning off the

ignition, a warning tone will sound. You can

turn off the warning tone.

Press FUNCTION to select one of the in-

itial settings.

Press FUNCTION repeatedly to switch be-

tween the following settings:

ClockꢂWARN (warning tone)ꢂAUX (auxili-

ary input)ꢂDIMMR (dimmer)ꢂR-SP (rear out-

put and subwoofer controller)ꢂTEL

(telephone)

Press FUNCTION to select WARN.

Press FUNCTION repeatedly until WARN ap-

pears in the display.

Use the following instructions to operate each

particular setting.

Press a or b to turn WARN on or off.

Pressing a or b will turn WARN on or off and

that status will be displayed (e.g.,

WARN :ON).

To cancel initial settings, press BAND.

You can also cancel initial settings by holding

down FUNCTION until the unit turns off.

Switching the auxiliarysetting

Setting the clock

Use these instructions to set the clock.

It is possible to use auxiliary equipment with

this unit. Activate the auxiliary setting when

using auxiliary equipment connected to this

unit.

Press FUNCTION to select clock.

Press FUNCTION repeatedly until clock ap-

pears in the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Initial Settings

Press FUNCTION to select AUX.

woofer controllerꢁs (low pass filter, phase)

built-in P/O :S/W or the auxiliary P/O :FUL.

Press FUNCTION repeatedly until AUX ap-

pears in the display.

Press FUNCTION to select R-SP.

Press a or b to turn AUX on or off.

Press FUNCTION repeatedly until R-SP ap-

Pressing a or b will turn AUX on or off and

that status will be displayed (e.g.,

AUX :ON).

pears in the display.

Press a or b to switch the rear output

setting.

Pressing a or b will switch between

R-SP :FUL (full-range speaker) and R-SP :S/W

(subwoofer) and that status will be displayed.

Switching the dimmer setting

When no subwoofer is connected to the rear

output, select R-SP :FUL.

When a subwoofer is connected to the rear

output, set for subwoofer R-SP :S/W.

When the rear output setting is R-SP :S/W,

you cannot change the subwoofer controller.

To prevent the display from being too bright at

night, the display is automatically dimmed

when the carꢁs headlights are turned on. You

can switch dimmer on or off.

Press FUNCTION to select DIMMR.

Press FUNCTION repeatedly until DIMMR ap-

pears in the display.

Press c or d to switch the subwoofer

output or non fading output.

Pressing c or d will switch between P/O :S/W

and P/O :FUL and that status will be dis-

played.

Press a or b to turn DIMMR on or off.

Pressing a or b will turn DIMMR on or off

and that status will be displayed (e.g.,

DIMMR :ON).

Notes

Even if you change this setting, there is no

output unless you turn the non fading output

(refer to Using non fading output on page 37)

or subwoofer output (refer to Using subwoofer

output on page 36) in the audio menu on.

If you change the subwoofer controller, sub-

woofer output and non fading output in the

audio menu return to the factory settings.

Setting the rear output and

subwoofer controller

This unitꢁs rear output (rear speaker leads out-

put) can be used for full-range speaker

(R-SP :FUL) or subwoofer (R-SP :S/W) connec-

tion. If you switch the rear output setting to

the R-SP :S/W, you can connect a rear speaker

lead directly to a subwoofer without using an

auxiliary amp.

Initially, the unit is set for rear full-range speak-

er connection (R-SP :FUL). When rear output

are connected to full range speakers (when

R-SP :FUL is selected), you can connect the

RCA subwoofer output to a subwoofer. In this

case, you can select whether to use the sub-

Switching the telephone

muting/attenuation

Sound from this system is muted or attenu-

ated automatically when a call is made or re-

ceived using a cellular telephone connected to

this unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Initial Settings

The sound is turned off, MUTE or ATT is

displayed and no audio adjustment is pos-

sible.

Operation returns to normal when the

phone connection is ended.

Press FUNCTION to select TEL.

Press FUNCTION repeatedly until TEL appears

in the display.

Press c or d to switch the telephone

muting/attenuation.

Pressing c or d will switch between TEL :ATT

(attenuation) and TEL :MUT (muting) and that

status will be displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Other Functions

After you have selected AUX as the

Turning the clock display

on or off

source, press FUNCTION and hold until

TITLE IN appears in the display.

You can turn the clock display on or off.

Press a or b to select a letter of the al-

Press CLOCK to turn the clock display

phabet.

on or off.

Each press of a will display a letter of the al-

phabet in A B C ... X Y Z, numbers and sym-

bols in 1 2 3 ... > [ ] order. Each press of b will

display a letter in the reverse order, such as Z

Y X ... C B A order.

Each press of CLOCK turns the clock display

on or off.

The clock display disappears temporarily

when you perform other operations, but the clock

display appears again after 25 seconds.

Note

Even when the sources are off, the clock display

appears on the display. Pressing CLOCK turns

the clock display on or off.

Press d to move the cursor to the next

character position.

When the letter you want is displayed, press d

to move the cursor to the next position and

then select the next letter. Press c to move

backwards in the display.

Using the AUX source

An IP-BUS-RCA Interconnector such as the

CD-RB20/CD-RB10 (sold separately) lets you

connect this unit to auxiliary equipment fea-

turing RCA output. For more details, refer to

the IP-BUS-RCA Interconnector ownerꢁs man-

ual.

Move the cursor to the last position by

pressing d after entering the title.

When you press d one more time, the entered

title is stored in memory.

Press BAND to return to the playback

display.

Selecting AUX as the source

Press SOURCE to select AUX as the

source.

Setting the level indicator

These are two stored level indicator to select

Press SOURCE until AUX appears in the dis-

play.

If the auxiliary setting is not turned on, AUX

from.

cannot be selected. For more details, see Switch-

ing the auxiliary setting on page 39.

Press EQ and hold to select the level in-

dicator.

Press EQ and hold repeatedly to switch be-

tween the following settings:

Level indicator 1ꢂLevel indicator 2ꢂLevel in-

dicator fullꢂLevel indicator off

Setting the AUX title

The title displayed for the AUX source can be

changed.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Section

Other Functions

Swiching the XM channel select

setting

Introduction of XM operation

You can switch if you select a channel with a

channel number or from a channel category

when you select a channel.

Press CLOCK and hold to switch the

channel select setting.

You can use this unit with a separately sold uni-

versal XM satellite digital tuner system (GEX-

FM913XM) or XM satellite digital tuner (GEX-

P910XM).

For details concerning operation, refer to the

XMtuner ꢁs operation manuals. This section

provides information on XMoperations with

this unit which differs from that described in

the XMtuner ꢁs operation manual.

Press CLOCK to select the desired chan-

nel select setting.

Press CLOCK repeatedly to switch between

the following channel select settings:

CHNUMBER (channel number select mode)

ꢂCATEGORY (channel category select

mode)

1 XM tuner information

Shows the XMtuner information which has

been selected.

2 XM channel number indicator

Shows to which XMchannel number the

tuner is tuned.

If a channel number 100 to 199 is se-

lected, d will light up above the last two

digits of the XMchannel number.

If a channel number 200 or more is se-

lected, d will blink above the last two di-

gits of the XMchannel number.

XM operation

XMoperation of the following function with

this unit differs.

Swiching the XM channel select setting

(Refer to this page.)

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Additional Information

Appendix

Use only normal, round CDs. If you insert ir-

regular, non-round, shaped CDs they may

jam in the CD player or not play properly.

Understanding built-in CD

player error messages

When problems occur during CD play an error

message may appear on the display. If an

error message appears on the display refer to

the table below to see what the problem is and

the suggested method of correcting the pro-

blem. If the error cannot be corrected, contact

your dealer or your nearest Pioneer Service

Center.

Check all CDs for cracks, scratches or

warped discs before playing. CDs that have

cracks, scratches or are warped may not

play properly. Do not use such discs.

Avoid touching the recorded (non-printed

side) surface when handling the disc.

Store discs in their cases when not in use.

Keep discs out of direct sunlight and do

not expose the discs to high temperatures.

Do not attach labels, write on or apply che-

micals to the surface of the discs.

Message

Cause

Action

ERROR-11, 12, Dirty disc

Clean disc.

17, 30

ERROR-11, 12, Scratched disc

Replace disc.

17, 30

ERROR-10, 11, Electrical or me- Turn the ignition

12, 17, 30, A0 chanical

ON and OFF, or

switch to a differ-

ent source, then

back to the CD

player.

To clean dirt from a CD, wipe the disc with

a soft cloth outward from the center of the

disc.

ERROR-22, 23 The CD format

cannot be played

back

Replace disc.

ERROR-44

All tracks are

skip tracks

Replace disc.

HEAT

CD player over-

heated

Turn off the CD

player until the CD

player cools down.

If the heater is used in cold weather, moist-

ure may form on components inside the

CD player. Condensation may cause the CD

player to not operate properly. If you think

that condensation is a problem turn off the

CD player for an hour or so to allow the CD

player to dry out and wipe any damp discs

with a soft cloth to remove the moisture.

Road shocks may interrupt CD playback.

CD player and care

Use only CDs that have either of the two

Compact Disc Digital Audio marks as

shown below.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Additional Information

Appendix

using Windows Media Player version 7, 7.1

CD-R/CD-RW discs

or Windows Media Player for Windows XP.

With some applications used to encode

WMA files, this unit may not operate cor-

rectly.

When CD-R/CD-RW discs are used, play-

back is possible only for discs which have

been finalized.

It may not be possible to play back CD-R/

CD-RW discs recorded on a music CD re-

corder or a personal computer because of

disc characteristics, scratches or dirt on

the disc, or dirt, condensation, etc. on the

lens of this unit.

With some applications used to encode

WMA files, album names and other text in-

formation may not be correctly displayed.

This unit allows playback of MP3/WMA

files on CD-ROM, CD-R and CD-RW discs.

Disc recordings compatible with level 1

and level 2 of ISO9660 and with the Romeo

and Joliet file system can be played back.

It is possible to play back multi-session

compatible recorded discs.

Playback of discs recorded on a personal

computer may not be possible depending

on the application settings and the environ-

ment. Please record with the correct for-

mat. (For details, contact the manufacturer

of the application.)

MP3/WMA files are not compatible with

packet write data transfer.

Playback of CD-R/CD-RW discs may be-

come impossible in case of direct exposure

to sunlight, high temperatures, or the sto-

rage conditions in the car.

Titles and other text information recorded

on a CD-R/CD-RW disc may not be dis-

played by this unit (in the case of audio

data (CD-DA)).

This unit conforms to the track skip func-

tion of the CD-R/CD-RW disc. The tracks

containing the track skip information are

skipped automatically (in case of audio

data (CD-DA)).

The max. number of characters which can

be displayed for a file name, including the

extension (.mp3 or .wma), is 32 characters

from the first character.

The max. number of characters which can

be displayed for a folder name is 32 charac-

ters.

In case of files recorded according to the

Romeo and Joliet file system, only the first

32 characters can be displayed.

When playing discs with MP3/WMA files

and audio data (CD-DA) such as CD-EXTRA

and MIXED-MODE CDs, both types can be

played only by switching mode between

MP3/WMA and CD-DA.

The folder selection sequence for playback

and other operations becomes the writing

sequence used by the writing software. For

this reason, the expected sequence at the

time of playback may not coincide with the

actual playback sequence. However, there

also is some writing software which per-

mits setting of the playback order.

If you insert a CD-RW disc into this unit,

time to playback will be longer than when

you insert a conventional CD or CD-R disc.

Read the precautions with CD-R/CD-RW

discs before using them.

MP3 and WMA files

MP3 is short for MPEG Audio Layer 3 and

refers to an audio compression technology

standard.

WMA is short for Windows Media" Audio

and refers to an audio compression tech-

nology that is developed by Microsoft Cor-

poration. WMA data can be encoded by

Important

When naming an MP3 or a WMA file, add the

corresponding filename extension (.mp3 or

.wma).

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Additional Information

Appendix

This unit plays back files with the filename ex-

tension (.mp3 or .wma) as an MP3 or a WMA

file. To prevent noise and malfunctions, do not

use these extensions for files other than MP3

or WMA files.

shown as folders in the folder currently se-

lected.

MP3 additional information

Files are compatible with the ID3 Tag Ver.

1.0 and Ver. 1.1 formats for display of

album (disc title), track (track title) and ar-

tist (track artist).

Only when MP3 files of 32, 44.1 and 48 kHz

frequencies are played back, the emphasis

function is valid. (16, 22.05, 24, 32, 44.1, 48

kHz sampling frequencies can be played

back.)

There is no m3u playlist compatibility.

There is no compatibility with the MP3i

(MP3 interactive) or mp3 PRO format.

The sound quality of MP3 files generally be-

comes better with increasing bit rate. This

unit can play recordings with bit rates from

8 kbps to 320 kbps, but in order to be able

to enjoy a certain sound quality, it is recom-

mended to use only discs recorded with a

bit rate of at least 128 kbps.

1 First level

2 Second level

3 Third level

WMA additional information

Only when WMA files of 32, 44.1 and 48

kHz frequencies are played back.

Notes

The sound quality of WMA files generally

becomes better with increasing bit rate.

This unit can play recordings with bit rates

from 48 kbps to 192 kbps, but in order to be

able to enjoy a certain sound quality, it is

recommended to use discs recorded with a

higher bit rate.

This unit assigns folder numbers. The user

can not assign folder numbers.

It is not possible to check folders that do not

include MP3/WMA files. (These folders will be

skipped without displaying the folder number.)

MP3/WMA files in up to 8 tiers of folders can

be played back. However, there is a delay in

the start of playback on discs with numerous

tiers. For this reason we recommend creating

discs with no more than 2 tiers.

About folders and MP3/

WMA files

It is possible to play back up to 253 items from

folder on one disc.

An outline of a CD-ROM with MP3/WMA

files on it is shown below. Subfolders are

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Additional Information

Appendix

Romeo:

Terms

Bit rate

File names can have up to 128 characters.

This expresses data volume per second, or bps

units (bits per second). The higher the rate,

the more information is available to reproduce

the sound. Using the same encoding method

(such as MP3), the higher the rate, the better

the sound.

m3u

Playlists created using the ꢃWINAMPꢄ soft-

ware have a playlist file extension (.m3u).

MP3

MP3 is short for MPEG Audio Layer 3. It is an

audio compression standard set by a working

group (MPEG) of the ISO (International Stan-

dards Organization). MP3 is able to compress

audio data to about 1/10th the level of a con-

ventional disc.

ID3 tag

This is a method of embedding track-related

information in a MP3 file. This embedded in-

formation can include the track title, the ar-

tistꢁs name, the album title, the music genre,

the year of production, comments and other

data. The contents can be freely edited using

software with ID3 Tag editing functions.

Although the tags are restricted to the number

of characters, the information can be viewed

when the track is played back.

Multi-session

Multi-session is a recording method that al-

lows additional data to be recorded later.

When recording data on a CD-ROM, CD-R or

CD-RW, etc., all data from beginning to end is

treated as a single unit or session. Multi-ses-

ISO9660 format

sion is a method of recording more than 2 ses-

sions in one disc.

This is the international standard for the for-

mat logic of CD-ROMfolders and files. For the

ISO9660 format, there are regulations for the

following two levels.

Packet write

Level 1:

This is a general term for a method of writing

on CD-R, etc. at the time required for a file,

just as is done with files on floppy or hard

discs.

The file name is in 8.3 format (the name con-

sists of up to 8 characters, half-byte English

capital letters and half-byte numerals and the

ꢃ_ꢄ sign, with a file-extension of three charac-

ters.)

Level 2:

VBR

The file name can have up to 31 characters (in-

cluding the separation mark ꢃ.ꢄ and a file ex-

tension). Each folder contains less than 8

hierarchies.

Extended formats

Joliet:

VBR is short for variable bit rate. Generally

speaking CBR (constant bit rate) is more

widely used. But to flexibly adjust the bit rate

according to the needs of audio compression,

it is possible to achieve compression priorities

sound quality.

File names can have up to 64 characters.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Additional Information

Appendix

WMA

WMA is short for Windows Media" Audio and

refers to an audio compression technology

that is developed by Microsoft Corporation.

WMA data can be encoded by using Windows

Media Player version 7, 7.1 or Windows Media

Player for Windows XP.

Microsoft, Windows Media, and the Windows

logo are trademarks, or registered trademarks

of Microsoft Corporation in the United States

and/or other countries.

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Additional Information

Appendix

Mid ....................................... +10 dB (100 Hz), +6.5 dB

Specifications

General

Power source ............................. 14.4 V DC (10.8 ꢀ 15.1 V al-

lowable)

(10 kHz)

High ..................................... +11 dB (100 Hz), +11 dB

(10 kHz)

(volume: ꢀ30 dB)

Tone controls:

Bass

Grounding system ................... Negative type

Max. current consumption

..................................................... 10.0 A

Dimensions (W × H × D):

DIN

Frequency ................ 40/63/100/160 Hz

Gain ............................ ±12dB

Treble

Frequency ................ 2.5k/4k/6.3k/10k Hz

Chassis ..................... 178 × 50 × 157 mm

(7 × 2 × 6-1/8 in.)

Nose ........................... 188 × 58 × 20 mm

(7-3/8 × 2-1/4 × 3/4 in.)

Gain ............................ ±12dB

HPF:

Frequency .......................... 50/80/125 Hz

Slope .................................... ꢀ12 dB/oct

Subwoofer:

Frequency .......................... 50/80/125 Hz

Chassis ..................... 178 × 50 × 162 mm

(7 × 2 × 6-3/8 in.)

Slope .................................... ꢀ18 dB/oct

Gain ...................................... ±12dB

Phase .................................. Normal/Reverse

Nose ........................... 170 × 46 × 15 mm

(6-3/4 × 1-3/4 × 5/8 in.)

Weight .......................................... 1.4 kg (3.1 lbs)

CD player

Audio

System .......................................... Compact disc audio system

Usable discs .............................. Compact disc

Signal format:

Continuous power output is 22 W per channel minimum

into 4 ohms, both channels driven 50 to 15,000 Hz with

no more than 5% THD.

Maximum power output ....... 50 W × 4

50 W × 2/4 W + 70 W × 1/2

W (for subwoofer)

Sampling frequency ..... 44.1 kHz

Number of quantization bits

........................................... 16; linear

Frequency characteristics ... 5 ꢀ 20,000 Hz (±1 dB)

Signal-to-noise ratio ............... 94 dB (1 kHz) (IHF-A net-

work)

Dynamic range ......................... 92 dB (1 kHz)

Number of channels .............. 2 (stereo)

MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3

WMA decoding format ......... Ver. 7 & 8

Load impedance ...................... 4 W (4 ꢀ 8 W [2 W for 1 ch] al-

lowable)

Preout max output level/output impedance

..................................................... 2.2 V/1 kW

Equalizer (3-Band Parametric Equalizer):

Low

Frequency ................ 40/80/100/160 Hz

Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB

when boosted)

FM tuner

Gain ............................ ±12dB

Frequency range ...................... 87.9 ꢀ 107.9 MHz

Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,

S/N: 30 dB)

Mid

Frequency ................ 200/500/1k/2k Hz

Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB

when boosted)

50 dB quieting sensitivity ..... 10 dBf (0.9 µV/75 W, mono)

Signal-to-noise ratio ............... 75 dB (IHF-A network)

Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz,

stereo)

Gain ............................ ±12dB

High

Frequency ................ 3.15k/8k/10k/12.5k Hz

Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB

when boosted)

0.1 % (at 65 dBf, 1 kHz,

mono)

Frequency response ............... 30 ꢀ 15,000 Hz (±3 dB)

Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)

Selectivity .................................... 80 dB (±200 kHz)

Gain ............................ ±12dB

Loudness contour

Low ....................................... +3.5 dB (100 Hz), +3 dB (10

kHz)

Download from Www.Somanuals.com. All Manuals Search And Download.

HHHHHHHHHHHHHH

Additional Information

Appendix

Three-signal intermodulation (desired signal level)

..................................................... 30 dBf (two undesired sig-

nal level: 100 dBf)

AM tuner

Frequency range ...................... 530 ꢀ 1,710 kHz (10 kHz)

Usable sensitivity ..................... 18 µV (S/N: 20 dB)

Signal-to-noise ratio ............... 65 dB (IHF-A network)

Note

Specifications and the design are subject to pos-

sible modifications without notice due to im-

provements.

Download from Www.Somanuals.com. All Manuals Search And Download.

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-1111

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada

TEL: (905) 479-4411

Published by Pioneer Corporation.

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd.Manuel Avila Camacho 138 10 piso

Col.Lomas de Chapultepec, Mexico, D.F. 11000

TEL: 55-9178-4270

Publié par Pioneer Corporation. Copyright

droits réservés.

Printed in Thailand

Imprimé en Thaïlande

<CRD3722-A/N> UC

Download from Www.Somanuals.com. All Manuals Search And Download.

DEH-P5500MP

This product conforms to CEMA cord colors.

Le code de couleur des câbles utilisé pour ce produit est

conforme à CEMA.

Los colores de los cables este producto se conforman

con el código de colores CEMA.

Printed in Thailand

Imprimé en Thaïlande

<CRD3723-A/N> UC

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the Units

Note:

•

This unit is for vehicles with a 12-volt battery and

negative grounding. Before installing it in a recre-

ational vehicle, truck, or bus, check the battery

voltage.

•

When an external power amp is being used with

this system, be sure not to connect the blue/white

lead to the amp’s power terminal. Likewise, do not

connect the blue/white lead to the power terminal

of the auto-antenna. Such connection could cause

excessive current drain and malfunction.

To avoid short-circuiting, cover the disconnected

lead with insulating tape. Especially, insulate the

unused speaker leads without fail. There is a possi-

bility of short-circuiting if the leads are not insulat-

ed.

To prevent incorrect connection, the input side of

the IP-BUS connector is blue, and the output side

is black. Connect the connectors of the same

colors correctly.

If this unit is installed in a vehicle that does not

have an ACC (accessory) position on the ignition

switch, the red lead of the unit should be connected

to a terminal coupled with ignition switch ON/OFF

operations. If this is not done, the vehicle battery

may be drained when you are away from the vehi-

cle for several hours. (Fig.1)

•

To avoid shorts in the electrical system, be sure to

disconnect the ≠ battery cable before beginning

installation.

Refer to the owner’s manual for details on

connecting the power amp and other units, then

make connections correctly.

Secure the wiring with cable clamps or adhesive

tape. To protect the wiring, wrap adhesive tape

around them where they lie against metal parts.

Route and secure all wiring so it cannot touch any

moving parts, such as the gear shift, handbrake and

seat rails. Do not route wiring in places that get

hot, such as near the heater outlet. If the insulation

of the wiring melts or gets torn, there is a danger of

the wiring short-circuiting to the vehicle body.

•

Don’t pass the yellow lead through a hole into the

engine compartment to connect to the battery. This

will damage the lead insulation and cause a very

dangerous short.

•

Do not shorten any leads. If you do, the protection

circuit may fail to work when it should.

Never feed power to other equipment by cutting

the insulation of the power supply lead of the unit

and tapping into the lead. The current capacity of

the lead will be exceeded, causing overheating.

•

When replacing fuse, be sure to use only fuse of

the rating prescribed on this unit.

Since a unique BPTL circuit is employed, never

wire so the speaker leads are directly grounded or

the left and right ≠ speaker leads are common.

ACC position

No ACC position

Fig. 1

•

Speakers connected to this unit must be high-

power types with minimum rating of 50 W and

impedance of 4 to 8 ohms. Connecting speakers

with output and/or impedance values other than

those noted here may result in the speakers

catching fire, emitting smoke or becoming dam-

aged.

•

The black lead is ground. Please ground this lead

separately from the ground of high-current prod-

ucts such as power amps.

If you ground the products together and the ground

becomes detached, there is a risk of damage to the

products or fire.

•

When this product’s source is switched ON, a con-

trol signal is output through the blue/white lead.

Connect to an external power amp’s system remote

control or the car’s Auto-antenna relay control ter-

minal (max. 300 mA 12 V DC). If the car features

a glass antenna, connect to the antenna booster

power supply terminal.

Cords for this product and those for other products

may be different colors even if they have the same

function. When connecting this product to another

product, refer to the supplied Installation manuals

of both products and connect cords that have the

same function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the Units

7 When not connecting a rear speaker lead to a Subwoofer

Connecting cords with RCA pin

plugs (sold separately)

Power amp

(sold separately)

This product

Front output

Power amp

(sold separately)

Subwoofer output or

non fading output

IP-BUS input

(Blue)

Fuse

Antenna jack

Multi-CD player

(sold separately)

IP-BUS cable

Blue/white

To system control terminal of the power amp or

Auto-antenna relay control terminal (max. 300

mA 12 V DC).

System remote control

Yellow/black

If you use a cellular telephone, connect it via the

Audio Mute lead on the cellular telephone. If not,

keep the Audio Mute lead free of any connections.

≠

Front speaker

Yellow

≠

To terminal always supplied with power regardless of

ignition switch position.

Red

White

Gray

To electric terminal controlled by ignition switch (12

V DC) ON/OFF.

≠

Front speaker

Right

≠

White/black

Green

Gray/black

Violet

Orange/white

To lighting switch terminal.

Left

≠

Rear speaker

Black (ground)

≠

To vehicle (metal) body.

Green/black

Violet/black

With a 2 speaker system, do not connect

anything to the speaker leads that are not

connected to speakers.

≠

Subwoofer

Perform these connections when using the

optional amplifier.

≠

Fig. 2

Download from Www.Somanuals.com. All Manuals Search And Download.

7 When using a Subwoofer without using the optional amplifier

This product

Front output

Fuse

Subwoofer output

Antenna jack

IP-BUS input

(Blue)

Multi-CD player

(sold separately)

IP-BUS cable

Blue/white

To system control terminal of the power amp or

Auto-antenna relay control terminal (max. 300

mA 12 V DC).

Yellow/black

If you use a cellular telephone, connect it via the

Audio Mute lead on the cellular telephone. If not,

keep the Audio Mute lead free of any connections.

Yellow

To terminal always supplied with power regardless of

ignition switch position.

Red

White

Gray

To electric terminal controlled by ignition switch (12

V DC) ON/OFF.

≠

Front speaker

≠

White/black

Green

Gray/black

Violet

Orange/white

To lighting switch terminal.

Left

Right

≠

Black (ground)

To vehicle (metal) body.

Subwoofer

≠

Green/black

Violet/black

Note:

Change the initial setting of this unit (refer to the Operation

Manual). The subwoofer output of this unit is monaural.

Fig. 3

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Note:

•

Before finally installing the unit, connect the

wiring temporarily, making sure it is all connected

up properly, and the unit and the system work

properly.

•

If installation angle exceeds 60° from horizontal,

the unit might not give its optimum performance.

(Fig. 4)

•

Use only the parts included with the unit to ensure

proper installation. The use of unauthorized parts

can cause malfunctions.

Consult with your nearest dealer if installation

requires the drilling of holes or other modifications

of the vehicle.

Install the unit where it does not get in the driver’s

way and cannot injure the passenger if there is a

sudden stop, like an emergency stop.

The semiconductor laser will be damaged if it

overheats, so don’t install the unit anywhere hot —

for instance, near a heater outlet.

60°

Fig. 4

DIN Front/Rear-mount

This unit can be properly installed either from “Front” (conventional DIN Front-mount) or

“Rear” (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit

chassis). For details, refer to the following illustrated installation methods.

DIN Front-mount

Installation with the rubber bush (Fig. 5)

Holder

After inserting the holder into the

dashboard, then select the appropriate

tabs according to the thickness of the

dashboard material and bend them.

(Install as firmly as possible using the

top and bottom tabs. To secure, bend

the tabs 90 degrees.)

Dashboard

182

Rubber bush

Screw

Fig. 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing the unit (Fig. 6) (Fig. 7)

Frame

Insert the release pin into the hole in

the bottom of the frame and pull out

to remove the frame.

(When reattaching the frame, point

the side with a groove downwards

and attach it.)

Fig. 6

Insert the supplied extraction keys

into the unit, as shown in the figure,

until they click into place. Keeping

the keys pressed against the sides of

the unit, pull the unit out.

Fig. 7

Download from Www.Somanuals.com. All Manuals Search And Download.

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 8)

Frame

Insert the release pin into the hole in

the bottom of the frame and pull out

to remove the frame.

(When reattaching the frame, point

the side with a groove downwards

and attach it.)

Fig. 8

2. Fastening the unit to the factory radio mounting bracket.

(Fig. 9) (Fig. 10)

Select a position where the screw holes of the bracket and

the screw holes of the head unit become aligned (are fitted),

and tighten the screws at 2 places on each side. Use either

truss screws (5 × 8 mm) or flush surface screws

(5 × 9 mm), depending on the shape of the screw holes in

the bracket.

Fig. 9

Screw

Dashboard or Console

Factory radio mounting bracket

Fig. 10

Download from Www.Somanuals.com. All Manuals Search And Download.

Fixing the front panel

If you do not operate the removing and attaching the front panel function, use the supplied

fixing screws and holders to fix the front panel to this unit.

1. Attach the holders to both sides of the front panel. (Fig. 11)

Fig. 11

2. Replace the front panel to the unit. (Fig. 12)

Fig. 12

3. Flip the holders into upright positions. (Fig. 13)

Fig. 13

4. Fix the front panel to the unit using fixing screws. (Fig. 14)

Fixing screw

Fig. 14

Download from Www.Somanuals.com. All Manuals Search And Download.

3Com Network Card 3C975 User Manual
3Com Power Supply Prestige Series User Manual
Acer Laptop LXASR0X106 User Manual
Alliance Laundry Systems Washer Dryer SWD441C User Manual
Amana Range AER5522VA User Manual
American Audio DJ Equipment Q SPAND User Manual
Asus Network Card NCLV D2 Series User Manual
Axor Indoor Furnishings 34010XX1 User Manual
Behringer Power Supply Power Mixer User Manual
Eureka Tents Tent Tundraline User Manual