AEG Washer 48380 User Manual

LAVAMAT 48580 aqua control  
LAVAMAT 48380 aqua control  
The environmentally friendly washing machine  
User information  
PERFEKT IN FORM UND FUNKTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Language .................................................................................................... 21  
Clock ............................................................................................................ 21  
Contrast and brightness ........................................................................ 22  
Washing guide .......................................................................................... 23  
Sorting and preparing your washing ................................................ 23  
Washing load depending on the nature of the material ............ 23  
Detergents and additives ...................................................................... 24  
International symbols ............................................................................. 25  
Programmes tables .................................................................................. 26  
Washing ...................................................................................................... 26  
Rinse ............................................................................................................. 27  
Spinning ...................................................................................................... 27  
Technical Characteristics ....................................................................... 28  
Consumptions and programme durations ....................................... 28  
Care and cleaning .................................................................................... 29  
Descaling the washing machine ......................................................... 29  
The surface ................................................................................................. 29  
The detergents dispenser ....................................................................... 29  
The drain filter .......................................................................................... 30  
Operating problems ................................................................................ 32  
FOR THE INSTALLER ................................................................................. 37  
Installation and connection instructions ......................................... 37  
Warnings .................................................................................................... 37  
Installation ................................................................................................. 38  
Guarantee ................................................................................................... 42  
After Sales Service ................................................................................... 42  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
A - FOR THE USER  
WARNINGS  
Keep this user’s manual with your washing machine. If you sell your  
washing machine or give it away, make sure that it is accompanied by  
its user’s manual. The new user can then be informed of how the  
washing machine operates and read relevant warnings.  
These warnings have been written for your safety and for the safety  
of others. Please read these comments carefully before installing  
and using your washing machine. Thank you for your attention.  
Usage  
• When you receive your washing machine, unpack it or have it  
unpacked immediately. Check its general appearance. Make any  
reserves in writing on the delivery form and keep a copy.  
• Your washing machine was designed for use by adults. Make sure  
that children do not touch it or use it as a toy.  
• Do not modify or attempt to modify the characteristics of this  
washing machine. This could be dangerous for you.  
• Your washing machine is intended for normal domestic use. Do not  
use it for commercial or industrial purposes of for any purpose  
other than that for which it was designed : to wash, to rince and to  
spin.  
• Unplug the power suplly plug and close the water supply tap every  
time after using your washing machine.  
• Only wash articles that can resist machine washing. Refer to the  
instructions on the label for each article.  
• Do not wash underwear with bones, or any material without hems,  
or torn materials in your washing machine.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
• Remember to remove all coins, safety pins, boraches, screws, etc.,  
before each wash. They can cause serious damage if they are left  
in your washing.  
• Do not put articles in your washing machine if you have used a  
solvent, alcohol, trichloroethylene, etc., to remove stains from  
them. If you must use these stain removers, wait until the pro-  
duct has evaporated before putting the articles in the drum.  
• Collect all small articles such as socks, belts, etc., in a small cloth  
bag or pillow case.  
• Use the quantity of detergent indicated in the «proportioning of  
detergents» section.  
• Always unplug the washing machine before cleaning it and doing  
any maintenance.  
Precautions against frost  
If your washing machine is exposed to temperatures below 0°C, take  
the following precautions :  
• Close the tap and disconnect the water supply pipe.  
• Put the end of this pipe and the drain pipe into a bowl on the  
floor.  
• Select the «Drain» programme and make sure it works until it is  
complete.  
• Switch the washing machine off by putting the program selector  
*
to the «Off» position or pressing on the «On/Off»* key.  
• Unplug the washing machine.  
• Screw in the water inlet pipe and install the drain pipe.  
*depending on model  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Water that remained in the pipes will then be evacuated, thus  
preventing the formation of frost or ice that can damage your washing  
machine.  
The next time you want to use your washing machine, make sure that  
it is installed in a room in which the temperature is above 0°C.  
Scrapping  
All materials marked with the  
symbol can be recycled. Put them in  
a waste tip (ask for information from your municipal offices) so that  
they can be recovered and recycled.  
When you take your washing machine to the tip, make sure that  
everything that could be dangerous is out of service ; cut the power  
supply cable flush with the surface of your washing machine.  
Protection of the environment  
We recommend that the following instructions should be followed to  
achieve savings in water and energy and therefore to contribute to  
protection of the environment:  
• If possible, use the washing machine at full capacity rather than  
with partial loads (however, do not overload the drum).  
• Only use the Prewash or Soak function for very dirty washing.  
• Use a detergent dose adapted to the water hardness (see «propor-  
tioning of detergents» section) and to the amount of washing and  
how dirty it is.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Description of the appliance  
Control panel  
Lid  
Lid opening handle  
Filter door  
Lever for moving the  
washing machine  
Levelling screws  
Control panel  
Programme knob and  
On/Off dial  
Display  
Function pushbuttons  
What is shown in the display  
Information field, shows the current settings  
Current  
time  
End of cycle  
COTTONS  
12.45  
15.05  
Cycle end at  
95 C  
900  
Temperature  
Spin speed /  
rinse hold  
Options  
Times  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Prior to using for the first time  
Switching on the appliance for the first time -  
setting the language  
Important! If the display does not show the menu for setting the  
language when the appliance is switched on, the appliance has been  
switched on before. If this happens, please see the section «Setup/  
Language».  
To switch on the appliance,  
turn the programme knob to any  
programme, e. g. COTTONS  
If you want to keep the language :  
Press the OK pushbutton  
Language:  
.
FRENCH  
If you want to change the  
language:  
1. Press the OPTION  
pushbutton repeatedly, until  
the desired language appears in  
the display e. g. ENGLISH.  
2. Press the OK pushbutton  
In the display ENGLISH flashes  
several times and the display  
should then look like e.g. the  
illustration opposite.  
Language:  
ENGLISH  
3. To switch the appliance off, turn  
the programme knob to OFF.  
Setting the time  
So that the time and the end of the programme are correctly displayed,  
please check the display and set the current time if necessary. To do  
this, please see the section «Setup/Clock».  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Carrying out a wash programme prior to first use  
In order to remove any residues form the drum and detergent  
dispenser which may have been left during manufacturing, perform  
the first wash cycle without any washing in the machine. programme  
: LINEN  
/ EASY CARES  
60°C, option TIME SAVING : VERY  
SHORT, use approx. 1/4 measuring cup of detergent.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Preparing and sorting washing  
Preparing washing  
• Empty pockets. Remove foreign bodies (e.g. coins, paper clips, nails,  
etc.).  
• Do up zips, button up covers to prevent damage to washing.  
• Remove the runners from net curtains or cover them with a net or  
a bag.  
• Wash sensitive and small items in a net or a pillow case, e.g. net  
curtains, tights, socks, handkerchiefs, bras.  
Important ! Bras and other items containing wires should only be  
washed in a net bag. The wires can work loose and damage the  
appliance.  
Sorting washing  
• By colour : wash white and coloured washing separately. Washing  
can run.  
• By temperature, type of washing and care symbol.  
Important ! Do not wash fabrics with care symbol  
(= do not  
wash !) in the washing machine.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Running a washing cycle  
Loading the washing  
• Lift the machine cover.  
• Open the drum by pressing on the locking button A; the two  
flaps automatically separate.  
• Insert the washing, close the drum and the cover of your washing  
machine.  
Warning : before you close the cover of  
your washing machine, make sure that the  
drum door is properly closed :  
•the two flaps latched together,  
•the locking button A extended.  
A
Proportioning of detergents  
Pour the powder detergent dose into the wash compartment  
and  
into the prewash compartment  
if you chose the «prewash»  
option.  
Pour in the softener into the compartment . If you are using a dif-  
ferent type of detergent, refer to the «detergents and additives» sec-  
tion in the washing guide.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Switching on the appliance/Selecting a programme  
Select the programme using the  
programme knob, e.g., LINEN  
/EASY CARES  
.
By selecting a programme, you  
switch the appliance on at the  
same time.  
– The display lights up and shows  
the programme set, the current  
time and the estimated end of  
the cycle.  
– Depending on the programme, the washing machine suggests a  
temperature and a spin speed. You can change these suggestions.  
– The lighting for the display switches itself off at the end of the cycle  
or, if the appliance is not started after the programme is set, after 10  
minutes. To switch the light on again, press any key or turn the  
programme knob.  
12.45  
LINEN/EASY CARES  
Changing the temperature  
14.37  
Cycle end at  
Press the TEMP. key  
1000  
50°C  
repeatedly until the desired  
temperature is displayed.  
Changing spin speed / Selecting rinse hold  
Press the RPM key  
repeatedly, until the desired spin  
12.45  
14.37  
LINEN/EASY CARES  
Cycle end at  
speed or  
displayed.  
RINSE HOLD is  
1000  
50°C  
• With spin speed «0» the last  
rinse water is drained off at  
the end of the cycle, but the  
washing is not spun.  
• With  
RINSE HOLD the washing is left to soak in the last rinse  
water. There is no final spin after the intermediate spin(s).  
Intermediate spins are programme-dependent and cannot be  
altered.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Setting options  
Options can be added to a wash cycle that has already been selected.  
Press the OPTION key  
options.  
. The display shows the symbols for the  
Prewash  
Pre-washes at about 30°C before the main wash cycle, which follows  
automatically.  
Sensitive  
Enhanced rinse action through an additional rinse cycle together with  
decreased drum movement (improved fabric care). This is ideal when  
frequent washes are necessary, for example, in cases of highly  
sensitive skin. An additional rinse cycle can also be permanently set  
(see section “Setup”).  
Stain  
For heavily soiled and stained washing. In-wash stain treatment  
products are washed in at the optimum time as the programme  
progresses.  
Night Cycle  
The washing is left to soak in the final rinse water. There is no final  
spin and no intermediate spin. Because of tis the programme runs  
very quietly. NIGHT CYCLE is therefore particularly suitable if you  
want to wash at night.  
Setup  
The special functions that can be set under Setup remain permanently  
stored in the appliance, e. g., time, language, etc. (see section “Setup”)  
until they are changed or deactivated.  
Only the options that can be combined with the cycle that has already  
been set are shown in the display.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Prewash, Sensitive, Stain, Night Cycle  
1. Press the OPTION key  
repeatedly until the desired  
symbol flashes, e. g.,  
12.45  
14.37  
LINEN/EASY CARES  
Prewash  
PREWASH. (with each press of  
the key, the next symbol flashes,  
from left to right)  
2. Press the OK key. The symbol  
stops flashing. A black bar  
appears under the symbol. The  
option is set. The display  
changes to the next option.  
To switch off the option, press  
12.45  
14.56  
LINEN/EASY CARES  
Sensitive  
the OPTION key  
repeatedly  
until the symbol for the option  
flashes and then press the OK  
key. The black bar under the  
symbol disappears.  
If other options are to be selected : press the OPTION key  
repeatedly until the desired symbol flashes and confirm each one  
with the OK key.  
12.45  
LINEN/EASY CARES  
3. Press the OPTION key  
14.37  
Cycle end at  
repeatedly until the exit icon  
appears. The display shows the  
symbol for the selected option.  
800  
50°C  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Setting times  
Shortened cycles and the delay of the start time can be set for a wash  
cycle that has already been selected.  
Press the TIME key  
. The display shows the symbols for Time  
Saving and Delay Start.  
Time Saving : SHORT or VERY SHORT  
Shortened wash cycle for lightly soiled washing.  
– SHORT : only possible with the programmes COTTONS/LINEN  
,
EASY-CARES  
and EASY IRON  
.
– VERY SHORT : only possible with the programmes COTTONS/LINEN  
, EASY CARES  
, EASY IRON  
and DELICATES  
.
Delay Start  
To delay the start of a programme by between 30 minutes and a max.  
of 20 hours.  
Time Saving : SHORT or VERY SHORT  
1. Press the TIME key  
12.45  
Time Saving  
repeatedly, until the TIME  
14.37  
NORMAL  
SAVING symbol  
flashes.  
2. Press the OK key.  
3. Press the TIME key  
. A  
black bar appears under the  
symbol, SHORT or VERY  
SHORT appears in the display.  
4. To change from SHORT to  
VERY SHORT, press the TIME  
12.45  
14.12  
LINEN/EASY CARES  
Cycle end at  
key  
again.  
You can change between  
NORMAL, SHORT and VERY  
SHORT using the TIME key  
.
5. Press the OK key to confirm the selection. The display changes to  
the symbol for Delay Start, i. e. Delay Start can now be set.  
6. Press the TIME key  
, if no Delay Start is to be set. The display  
shows the TIME SAVING symbol  
of the cycle.  
as well as the time for the end  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Delay Start  
1. Press the TIME key  
flashes.  
repeatedly, until the DELAY START symbol  
2. Press the OK key. In the display, “Start in 0 min” is displayed.  
3. Press the TIME key  
repeatedly, until the display shows  
12.45  
Delay Start  
the desired period by which you  
Start in 4 hours  
want to delay the start, e. g. “Start  
in 4 h” (=4 hours). A black bar  
appears under the  
symbol.  
If 20 h is displayed and you  
press the key again, the delayed  
start is cancelled.  
4. Press the OK key. The display shows the DELAY START symbol  
and  
the time until the end of the programme (including period by which  
the start has been delayed).  
5. To activate the Delay Start, press  
12.45  
LINEN/EASY CARES  
the START/PAUSE key  
. The  
display now shows e. g., “Start in  
4.00” (=4 hours). The display for  
the time remaining until the start  
of the programme is reduced in 30  
minute intervals (e. g., 4.00, 3.30,  
3.00, ... 0.30, 0).  
4.00  
Start in  
800  
50°C  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Starting a programme  
1. Check that the water tap is open.  
2. Press the START/PAUSE key  
.
The programme is started or it starts after the time delay set has  
elapsed.  
If after pressing the START/PAUSE key  
the display shows  
“Door not closed”, the door has not been shut properly. Push the door  
firmly closed and press the START/PAUSE key  
again.  
Programme progress  
The display indicates the stage of  
the programme that is currently  
being performed as well as the  
time of the end of the  
programme.  
12.45  
14.37  
LINEN/EASY CARES  
Wash  
During the washing cycle the  
time of the end of the programme  
may change as the programme  
adjusts itself to different conditions  
(e. g., type and quantity of laundry,  
out of balance spin detection,  
special rinses, etc.).  
800  
50°C  
Interrupting a programme / Adding washing  
Interrupting a programme  
• The wash programme can be interrupted at any time by pressing  
the START/PAUSE key  
key again.  
. It is then re-started by pressing the  
• To stop the washing machine before the programme has ended,  
turn the programme knob to OFF.  
Important : Be careful if there is water in the appliance !  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Adding washing  
1. Press the START/PAUSE key  
.
• If “Door locked” and “Pause” are alternately shown in the display, it  
is no longer possible to add washing, e. g. when the water level is  
too high.  
• If “Door unlocked” and “Pause” are alternately shown in the  
display, it is still possible to add washing :  
2. Open the door.  
3. Add washing and close the door again.  
4. Press the START/PAUSE key  
again. The programme continues.  
Washing cycle complete / Removing the washing  
At the end of the cycle a long acoustic signal sounds 3 times (when the  
SOUND VOLUME setting is NORMAL or LOW) and the messages “Cycle  
ended” and “Door openable” appear alternately in the display.  
1. Open the door and remove the washing.  
2. Turn the programme knob to OFF.  
3. After the wash, pull out the detergent dispenser drawer slightly to  
allow it to dry. Leave the door slightly open to air the inside of the  
washing machine.  
If RINSE HOLD  
or NIGHT CYCLE  
was selected :  
After a Rinse Hold or when a programme with NIGHT CYCLE has ended,  
the START/PAUSE indicator flashes. “Cycle ended” and “Door locked”  
appear alternately in the display.  
The water must first be drained :  
• Turn the programme knob to OFF, then to DRAIN  
and press  
the START/PAUSE key  
or  
(the water is drained without spinning),  
• Turn the programme knob to OFF and then to SPIN  
. Change  
the spin speed if necessary and press the START/PAUSE key  
(the water is drained and the washing spun).  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Setup  
The special functions that can be set under Setup remain permanently  
stored independent of each washing cycle - even after the appliance  
has been switched off or the main plug has been removed from the  
socket.  
Memory 1, 2, 3  
Programme combinations can be stored at programme knob positions  
MEMORY 1, 2, 3 and can then be selected directly using the  
programme knob. To do this, the desired programme combination is  
first put together and then stored.  
12.45  
LINEN/EASY CARES  
Setting the memory  
Example : programme position  
14.37  
Cycle end at  
MEMORY 1 is to be given the  
800  
40°C  
following  
programme  
combination : LINEN/EASY CARES,  
40°C, 800 rpm, with PREWASH.  
1. Turn the programme knob to  
LINEN  
/EASY CARES  
.
2. Press the TEMP key  
display.  
repeatedly, until 40°C appears in the  
3. Press the RPM key  
4. Using the OPTION key  
repeatedly, until 800 appears in the display.  
set PREWASH and press the OK key.  
A black bar appears under the PREWASH symbol  
.
5. Press the OPTION key  
flashes.  
repeatedly, until the SETUP symbol  
Memory 1  
6. Press the OK key. The display  
changes to the Special Functions  
level. Programme memory position  
MEMORY 1 is offered first.  
To change to another memory  
position, press the OPTION key  
.
Store program ?  
7. Press the OK key. The programme combination is now stored to  
programme knob position MEMORY 1 and in the future can be  
selected directly using the programme knob.  
The Memory can be overwritten at any time with a new  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
programme combination (see “Changing the Memory”) but cannot be  
deleted.  
Changing the Memory  
1. Put together the new programme combination as required (for an  
example, see “Setting the Memory”, steps 1 to 4).  
2. Press the OPTION key  
flashes.  
3. Press the OK key.  
4. Using the OPTION key  
changed, e. g. MEMORY 1.  
repeatedly, until the SETUP symbol  
select the memory position to be  
5. Store the new programme combination using the OK key.  
Volume  
The volume of the acoustic signal can be selected.  
1. Turn the programme knob to any programme and press the OPTION  
key  
repeatedly, until the SETUP symbol  
flashes.  
2. Press the OK key.  
3. Press the OPTION key  
Sound  
repeatedly, until VOLUME is shown  
in the display.  
NORMAL  
4. Press the OK key.  
5. Press the OPTION key  
repeatedly, until the desired  
volume (NORMAL, LOW, NO  
SOUND) is shown in the display.  
6. Press the OK key to confirm  
the setting. The icon changes to the next special function.  
7. Press the OPTION key  
repeatedly, until the exit icon is displayed.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Extra Rinse  
1. Turn the programme knob to any programme and press the OPTION  
key repeatedly, until the SETUP symbol flashes.  
2. Press the OK key.  
Extra rinse  
YES  
3. Press the OPTION key  
repeatedly, until EXTRA RINSE is  
shown in the display.  
4. Press the OK key. The EXTRA  
RINSE symbol  
appears. The  
display changes to the next  
special function.  
5. Press the OPTION key  
repeatedly, until the exit icon appears.  
Language  
1. Turn the programme knob to any programme and press the OPTION  
key  
repeatedly, until the SETUP symbol  
flashes.  
2. Press the OK key.  
3. Press the OPTION key  
repeatedly, until the display  
shows LANGUAGE.  
Language  
ENGLISH  
4. Press the OK key.  
5. Press the OPTION key  
repeatedly, until the desired  
language appears in the display,  
e. g. ENGLISH.  
6. Press the OK key.  
The display changes to the next special function.  
7. Press the OPTION key repeatedly, until the exit icon appears.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Clock  
1. Turn the programme knob to any programme and press the OPTION  
key  
repeatedly, until the SETUP symbol  
flashes.  
2. Press the OK key.  
3. Press the OPTION key  
repeatedly, until CLOCK is shown in  
the display.  
11.17  
Clock  
4. Press the OK key.  
Set time  
5. Using the OPTION key  
, set  
the desired time. With each press  
of the key, the display moves on by  
one minute. Keeping the key  
depressed changes the display in  
10 minute steps.  
6. Press the OK key. The display changes to the next special function.  
7. Press the OPTION key repeatedly, until the exit icon appears.  
Contrast and brightness  
1. Turn the programme knob to any programme and press the OPTION  
key  
repeatedly, until the SETUP symbol  
flashes.  
2. Press the OK key.  
3. Press the OPTION key  
repeatedly, until the display shows  
CONTRAST or BRIGHTNESS.  
4. Appuyer sur la touche OK.  
5.  
11.17  
Contrast  
I----->-----I  
6. Using the OPTION key  
, set  
the desired setting. With each press  
of the key or if the key is kept  
pressed down, the black triangle in the diagram moves further to the  
right for more contrast or brightness. If the triangle reaches the right  
hand edge, it starts again from the left.  
7. Press the OK key. The display changes to the next special function or  
back to the exit icon.  
8. Press the OPTION key  
repeatedly, until the exit icon appears.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Washing guide  
Sorting and preparing your washing  
• Sort the washing by type and care symbol (see chapter 5.4: Inter-  
national symbols for care of textiles): normal wash for strong  
washing that can resist energetic wash and spin; delicate wash  
for delicate washing that should be treated more carefully. For  
mixed loads composed of articles of different types of fibers,  
choose a program and temperature suitable for the most fragile  
fiber.  
• Wash white washing and color washing separately. Otherwise,  
the white washing may be colored or look gray.  
• New clothes very often have too much color. Preferably wash  
new clothes separately for the first time. Respect "wash separa-  
tely" and "wash several times separately" care instructions.  
• Empty pockets and spread out the washing.  
• Take off all loose buttons, pins and hooks and eyes. Close zip fas-  
teners, tie knots in laces and straps.  
• Turn clothes made of several layers of textiles (sleeping bags,  
anoraks, etc.), colored hosiery and wool and textiles with add-on  
decorations, inside out.  
• Wash small delicate items (socks, tights, bras, etc) in a washing  
net.  
• Treat curtains with special care. Remove curtain hooks and put  
net curtains in a net bag or a sachet.  
Washing load depending on the nature of the ma-  
terial  
The quantity of washing that you put in your drum must not exceed  
the maximum capacity of your washing machine. This capacity may  
vary depending on the nature of your textiles. Reduce the quantity  
of washing if it is very dirty or if you have terry cloth type materials.  
Not all textiles have the same volume and the same water retention  
capacity. This is why in general the drum should be filled:  
• completely, but without excessive pressure for cotton and linen,  
and for mixed washe,  
• half full for treated cottons and synthetic fibers,  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
• about one third full for very delicate articles such as net curtains  
and wool.  
For a mixed wash, fill the drum as required for the most delicate  
material.  
Detergents and additives  
Only use detergents and additives suitable for use in a washing  
machine. Read the manufacturer's instructions and respect sections  
about detergents dispenser and detergents.  
Powder detergents can be used without restriction; liquid detergents  
should be poured either in the proportioning bowl directly in the drum,  
or in the wash compartment provided that the washing machine is  
started immediately; detergents in tablets or doses must be put into  
the wash compartment of the detergents dispenser in your washing  
machine.  
The quantity of detergent to be used depends on the amount of  
washing to be washed, the hardness of the water and how dirty the  
washing is.  
If the water is soft, you can reduce the doses slightly. Increase the  
doses slightly if the water is hard (it is recommended to use a water  
softener) or if the washing is very dirty or stained.  
You can ask the water distribution company in your region or any  
other competent authority to find out the degree of hardness of your  
water.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
International symbols  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Programmes tables  
Washing  
This table does not include all possibilities, simply the best and most  
usual adjustments in practice.  
Washing  
type  
Max.  
washing  
quantity  
Timer  
Temperature  
Other possible  
options  
(dry weight)  
Washing to  
be boiled  
5 kg  
COTTONS  
0° to 95°  
NIGHT CYCLE  
SHORT/VERY  
SHORT  
*
ENERGY SAVING :  
***  
E
PREWASH  
**  
STAIN  
Cotton /  
Coloureds  
5 kg  
LINEN /  
EASY-CARES  
0° to 60°  
SENSITIVE  
RINSE +  
4,5 kg  
1 kg  
40 - 60 MIX  
NIGHT CYCLE  
PREWASH  
STAIN**  
EASY IRON  
0° to 40°  
****  
SENSITIVE  
RINSE +  
Delicate  
washing  
2,5 kg  
1,0 kg  
DELICATES  
0° to 40°  
Wool /  
WOOL /  
Handwash  
0° to 40°C  
SILK /  
All laundry  
2,5 kg  
30 MIN  
30°  
*Not available with the ENERGY SAVING and 40-60 MIX programmes.  
**STAIN can only be selected with wash temperatures of 40°C and above, as stain treat-  
ment products are only effective at higher temperatures.  
***Programme settings for testing in accordance with or in support of EN 60456 and IEC  
60456 are described in the chapter «Consumption Values».  
****Not available with the EASY IRON and DELICATES programmes.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Rinse  
Washing type  
Max. washing  
quantity (dry  
weight)  
Timer  
Washing to be boiled  
Coloureds  
5,0 kg  
Easy care washing  
Delicate washing  
Wool / Handwash  
2,5 kg  
2,5 kg  
1,0 kg  
RINSE  
Spinning  
Washing type  
Max. washing  
quantity (dry  
weight)  
Timer  
Washing to be boiled  
Coloureds  
5,0 kg  
Easy care washing  
Delicate washing  
Wool / Handwash  
2,5 kg  
2,5 kg  
1,0 kg  
SPINNING  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Technical Characteristics  
Height x Width x Depth  
850 x 400 x 600 mm  
VOLTAGE / FREQUENCY  
TOTAL POWER  
230 V / 50 Hz  
2300 W  
WATER PRESSURE  
Minimum 0,05 MPa (0,5 bar)  
Maximum 0,8 MPa (8 bars)  
Connection to the water  
network  
Type 20x27  
Load  
max. 5,0 kg  
Spin speed  
LAVAMAT 48580 : 1500 tr/min  
LAVAMAT 48380 : 1300 tr/min  
This washing machine complies with directive CEE 89-336  
about the limitation of radioelectric disturbances and di-  
rective CEE 73-23 for electrical safety.  
Consumptions and programme durations  
.
Washing Water  
Timer / Temperature  
Energy  
in kWh  
Dura-  
tion in  
minutes  
quantity  
in kg  
in  
liters  
COTTONS 95°  
5,0  
5,0  
2,5  
2,5  
2,5  
1,0  
48  
39  
39  
39  
38  
38  
1,70  
0,85  
0,85  
0,50  
0,30  
0,22  
140-150  
140-155  
85-100  
75-90  
ENERGY SAVING*  
LINEN / EASY-CARES 60°  
EASY IRON 40°  
DELICATES 40°  
50-60  
WOOL / Handwash 40°  
50-60  
*Programme setting for testing in accordance with standard EN 60456.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Care and cleaning  
Do not do any cleaning operation until you have unplugged the  
washing machine.  
Descaling the washing machine  
Normally there is no need to descale the washing machine if the  
detergent was correctly proportioned.  
If descaling is necessary, use a special non-corrosive product specially  
designed for washing machines that you can find in the shops.  
Respect the proportion and frequency of descaling shown on your  
packaging.  
The surface  
Clean the surface of your washing machine using lukewarm water  
and a mild detergent. Never use alcohol, solvents or similar products.  
The detergents dispenser  
From time to time, you must clean the detergents dispenser in order  
to eliminate the possible wastes of the detergents and then to avoid  
an operating problem.  
The detergent dispenser is very easy to remove for a light cleaning.  
Disassembly:  
Press the clips on each side of the detergents  
dispenser and pull it upwards.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
You can thus clean it using running water and  
a brush or a twisted cloth. Check that the  
siphons at the back of the detergents  
dispenser are not blocked.  
Reassembly :  
Put the detergents dispenser in the notches  
until they lock.  
The drain filter  
Clean the filter at the bottom of the washing machine regularly. The  
*
"filter" light comes on if the filter is blocked. In this case clean it  
immediately. If you wash washing that is very fluffy, clean it after each  
wash.  
Open the door, with a screwdriver for example:  
*depending on model  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Drain residual water:  
Put a receptacle under the drain. Turn the  
cap in the anti-clockwise direction until it is  
vertical to release residual water.  
Remove the filter:  
Unscrew the cap all the way and take it off.  
Clean it tho-roughly with running water.  
Put the assembly back and screw it in the  
clockwise direction.  
After cleaning the filter, you are required to closed the door. In fact,  
for reasons of safety, the door must be closed when the appliance is  
working.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Operating problems  
Many checks have been carried out during the manufacture of your  
washing machine. However, if you face a problem with its operation,  
please have a look at the following table before calling the After Sales  
Service. Moreover, it is possible that one of the following messages  
appears on the display :  
Problem with water supply : No incoming water. Check tape & hose»  
Problem with water draining : ..... No drain. Check drain hose / filter»  
Cover open : ................................................Door not closed. Please check»  
Once the problem has been eliminated, press the START/PAUSE button  
to restart the programme. If after all checks, the problem persists,  
contact the After Sales Service.  
Symptom  
Cause  
The washing machine will • the washing machine is not correctly  
not start or will not fill :  
connected, the electrical installation is  
not working,  
• the cover of your washing machine  
and the drum flaps are not correctly  
closed (Door not closed. Please check)  
• you did not control the program start  
correctly,  
• there is a power failure,  
• the water supply is closed off (No  
incoming water. Check tape & hose)  
• the water tap is closed (No incoming  
water. Check tape & hose)  
• the water inlet is blocked (No inco-  
ming water. Check tape & hose)  
The washing machine fills • the drain siphon is attached too low  
up but empties again  
immediately :  
(see installation section).  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Symptom  
Cause  
The washing machine will • the drain pipe is blocked or kinked (No  
not spin or will not empty :  
drain. Check drain hose / filter)  
• the drain filter is blocked (No drain.  
Check drain hose / filter)  
• the anti-unbalance mass safety device  
has tripped; bad distribution of  
washing in the drum,  
• the «Drain» program or the «Rinse hold»  
option is selected,  
• the height of the drain siphon is  
wrong.  
There is water on the floor • excess detergent has made too much  
around  
machine :  
the  
washing  
foam that overflowed (Excess deter-  
gent)  
• the detergent is not suitable for  
washing machine,  
• the drain siphon is not hooked on pro-  
perly,  
• the drain filter was not put back into  
place,  
• the water inlet pipe is leaking.  
Washing results are not • the detergent is not suitable for  
satisfactory :  
machine washing,  
• there is too much washing in the  
drum,  
• the washing program is not appro-  
priate,  
• there is not enough detergent.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Symptom  
Cause  
The machine is vibrating or • not all the packing was removed from  
noisy :  
the machine (see unpacking section),  
• the washing machine is not leveled  
and properly packed,  
• the washing machine is too close to  
the wall or furniture,  
• the washing is not well distributed in  
the drum,  
• the load is not sufficient.  
The washing cycle is much • the water inlet is blocked (No inco-  
too long :  
ming water. Check tape & hose)  
• there was a power supply failure or the  
water was cut off,  
• the motor temperature safety device  
tripped,  
• the water inlet temperature is lower  
than normal,  
• the foam detection safety system trip-  
ped (too much detergent) and the  
washing machine evacuated the foam,  
• the anti-unbalance mass safety device  
tripped, an additional phase was  
added to distribute the washing in the  
drum better.  
The washing machine stops • the water or electricity supply is  
during a washing cycle :  
defective,  
• a rinse hold was programmed.  
*
The cover does not open  
during the cycle :  
• the «IMMEDIATE OPENING» light is off,  
• the temperature of the washing water  
is too high,  
• the cover cannot open until 1 to 2  
minutes after the washing machine  
has stopped*.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Symptom  
Cause  
The following message • the cover is not correctly closed.  
«Door not closed. Please  
check» appears in the  
display window :  
The following message «No • the drain filter is blocked,  
drain. Check drain hose / • the drain pipe is blocked or kinked,  
filter» appears in the • the drain pipe is too high (see «instal-  
display window :  
lation»)  
• the drain pump is blocked,  
• the installation siphon is blocked.  
The following message «No • the water tap is closed,  
incoming water. Check • the water network has been cut off.  
tape & hose» appears in  
the display window :  
Softener or Javel water • you did not put in the right amount,  
flows  
through  
the • the siphons at the back of the deter-  
overflow orifice when  
filling. :  
gents dispenser are blocked (see «Care  
and Cleaning» section).  
The following message • you did not put in the right amount,  
«Excess detergent»  
appears in the display  
window :  
The following message • the drain filter is blocked.  
«Filter: blocked / Pump  
blocked» appears in the  
display window :  
The following message • the drum flaps are not correctly  
«Warning : EA6 / See  
instructions booklet»  
closed.  
appears in the display  
window :  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Symptom  
Cause  
The following message • turn the programme selector on the  
«Warning  
instructions  
:
E
/
See  
OFF position and call the After Sales  
Service.  
booklet»  
appears in the display  
window or the washing  
machine will not start or  
will be in Pause :  
* Depending on the model.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
B - FOR THE INSTALLER  
Installation and connection instructions  
Warnings  
• This washing machine is heavy. Take care when moving it.  
• You must remove the packing on the washing machine before  
use. Failure to remove all transport protection devices can cause  
damage to the washing machine or nearby furniture. The washing  
machine must be unplugged while packing is being removed.  
• Do not allow any one other than a qualified plumber to make the  
hydraulic connections necessary to install your washing machine.  
• The washing machine must be plugged in to a power outlet with  
a conform earth.  
• Call a qualified electrician if the electrical installation in your  
residence is such that you have to modify it before you can con-  
nect your washing machine.  
• Please read the instructions in the «Electrical connection» chapter  
carefully before connecting your washing machine.  
• After installing your washing machine, make sure that it is not  
standing on its electrical power supply cable.  
• When your machine is installed on a carpeted floor, make sure  
that the carpet does not close off the ventilation openings near  
the bottom of the machine.  
• The power supply cable may be only replaced by the After Sales  
Service.  
• Your manufacturer cannot be held responsible for any damage  
resulting from a nonconform installation.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Installation  
Unpacking  
Packing used to protect internal parts of the washing  
machine during transport must be removed before the  
washing machine is put into service for the first time.  
Remove all packing from the washing machine.  
Tilt the washing machine sideways and then  
remove the packing under the motor, and  
straighten the washing machine.  
Tilt the washing machine backwards, rotate it  
by a quarter of a turn on one of its corner to  
remove the transport base.  
Open the washing machine lid and remove the  
immobilization packing and plastic films.  
Close the lid.  
Use a 10 mm spanner to remove the two screws  
and spacers at the back.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
You can now see the openings that must be  
closed with the caches in the pack attached to  
the washing machine; do not forget to fold  
down the central capsule.  
Make sure that you have removed all these  
parts from your washing machine and keep  
them so that you can use them again if you  
need them for future transport.  
If the appliance is packed again, the springs  
(components of the two spacers) must be  
imperatively compressed between 21 and 24  
*
mm after tightening.  
(model LAVAMAT 48580)  
If you want to keep your washing machine  
aligned with the adjacent furniture, you can  
cut the pipe support strip at the back of your  
washing machine. Leave the two side closers in  
place.  
Position  
Put the washing machine on a flat hard floor in a well ventilated  
room. Make sure thta your washing machine does not touch the wall  
or any other furniture in the room.  
*According to the model  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Moving your washing machine  
If you want to move your washing machine, lift  
it onto its rollers by pulling the lever at the  
bottom of the washing machine all the way to  
the left. When you have put your washing  
machine into the required location, put the lever  
back into its initial position  
Leveling  
Precise leveling will prevent vibrations, noise and movements of the  
washing machine during operation.  
Make the washing machine level by adjusting  
the leveling screw that is too short.  
Unscrew the stand and locking collar assembly  
(lift the washing machine if necessary).  
When the washing machine is stable, maintain  
the stand on the ground and turn the locking  
collar as far as possible.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Water inlet  
The «aqua-stop» is a measure of protection  
against the damages caused by the water.  
Indeed, the water inlet worns away by time and  
it can so deteriorate. In this case, the «aqua-  
stop» prevents the water from going into the  
appliance.  
The problem is indicated by the appearance of  
a red mark in the window «A». Close the water  
inlet tap and call the After Sales Service.  
Screw the supply pipe connector onto the water inlet tap (20x27  
mm).  
Open the water inlet tap.  
You cannot prolong the water inlet pipe. If it is too short, call the  
After Sales Service.  
Drain  
The drain siphon must be placed inside a drain  
pipe (or in a washbasin) at a height of between  
70 and 100 cm. Make sure that it cannot fall.  
Important: the drain pipe must never be pro-  
longed. If it is too short, call a professional.  
Eletrical connection  
You can only connect this washing machine to 230 V single phase  
power supply.  
Check rating of the fuse line : 10 A at 230 V.  
The washing machine must not be connected through an extension  
cable or a power bar.  
Check that the earthing connection is conform with the regulations  
in force.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User information  
Guarantee  
Depending to the Sales Company.  
After Sales Service  
If you have an operating problem, refer to the "Operating problems"  
section. If any work is necessary after you have made all your checks,  
your washing machine dealer is the first person authorized to take ac-  
tion. Otherwise, you can always call Consumers Help that will inform  
you of the address of an After Sales Service.  
When you call the After Sales Service, mention the model and product  
number of your washing machine, and its serial number. This informa-  
tion is given on the inside of the filter door and on the data plate at  
the back of the washing machine.  
If any work is done on your washing machine, insist that your After  
Sales Service uses manufacturer certified spare parts.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AEG Hausgeräte GmbH  
Postfach 1036  
D-90327 Nürnberg  
ã
Copyright by AEG  
146 6484 00 - 06/04  
From the Electrolux Group. The world’s No.1 Choice.  
The Electrolux Group is the world largest producer of powered appliances for kitchen, cleaning and outdoor use. More than  
55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vaccum cleaners, chain saws and  
lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Aastra Telecom Telephone M5316 User Manual
Abocom Network Card CFM560 User Manual
ADTRAN Network Card HRE T200 User Manual
Airlink101 Network Router AR685W User Manual
Altinex Switch MX2436RM User Manual
Alto Shaam Oven Cook and Hold Ovens User Manual
Alvin Mobility Aid CH777 User Manual
Amana Microwave Oven MH220E User Manual
Amana Range W103209878 User Manual
American Sensor Smoke Alarm ESA5011 User Manual