AEG Dishwasher 60860 User Manual

FAVORIT 60860  
Dishwasher  
User information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Diagram of Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
4
4
5
5
Prior to Using for the First Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Setting the Water Softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
8
8
Adding dishwasher Salt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Filling Up with Rinse Aid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
In daily use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Loading cutlery and dishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Adjusting the Height of the Upper Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Adding Detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Using 3in1 detergents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Selecting the dishwashing cycle (Cycle Table) . . . . . . . . . . . . . . . . . . . . . . . . 22  
Starting a Dishwashing Cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Setting the Delay Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Switching Off the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Care and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
What to do if.... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Remedying small malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
If the Dishwashing Results are not Satisfactory. . . . . . . . . . . . . . . . . . . . . . . 32  
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Notes for Test Institutes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Installation and connection instructions. . . . . . . . . . . . . . . . . 37  
Safety Information for the Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Installing the Dishwasher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Connecting the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Electrical Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Warranty conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
1 Safety  
Prior to using for the first time  
Follow the ”Instructions for installation and connection.  
Correct Use  
The dishwasher is only intended for washing domestic dishes.  
Additions or modifications to the dishwasher are not permitted.  
Use only special salt, detergent and rinse aid suitable for domestic  
dishwashers.  
Do not put any solvents in the dishwasher. This could cause an explo-  
sion.  
Child Safety  
Keep packaging away from children. There is a risk of suffocation.  
Children often do not recognise the hazards associated with electrical  
appliances. Don’t allow children to use the dishwasher unsupervised.  
Make sure that children and pets don’t climb into the dishwasher.  
Could endanger life!  
Dishwasher detergents can cause chemical burns to the eyes, mouth  
and throat. Could endanger life! Comply with the safety instructions  
of the dishwasher detergent manufacturer.  
The water in the dishwasher is not for drinking. Risk of chemical  
burns.  
General Safety  
Repairs to the dishwasher are only to be carried out by qualified/au-  
thorised service engineers.  
When the dishwasher is not being used, switch it off and shut off the  
water tap.  
Never unplug the appliance by pulling on the cable. Always pull the  
plug.  
Ensure that the door of the dishwasher is always closed when it is not  
being loaded or unloaded. In this way you will avoid anybody tripping  
over the open door and hurting themselves.  
Never sit or stand on the open door.  
If the dishwasher is located in a room where there may be a frost, re-  
move the connection hose from the tap after each use of the dish-  
washer.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Diagram of Appliance  
Ceiling spray arm  
Upper basket spray arm  
and lower spray arm  
Water softener  
unit.  
Salt Container  
Detergent  
Dispenser  
Rinse aid  
dispenser  
Rating plate  
Filters  
Control Panel  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ON/OFF button  
Programme buttons  
1
2
3
Function buttons  
The ON/OFF button is used to turn the dishwasher on and off.  
The Programme buttons are used to select the desired dishwashing cy-  
cle.  
Function buttons: In addition to the pre-set dishwashing cycle, the  
following functions can also be set using these buttons:  
Function button 1  
Function button 2  
Function button 3  
Set the water softener  
Activates/deactivates rinse aid dispenser  
when 3in1 on  
- not programmed -  
The rinse aid inflow is only affected, if the 3in1 function is selected.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multi-display  
Programme progress display  
Control  
indicators  
Set delay Select  
timer 3 in1 function  
The multi-display can indicate:  
the level of hardness to which the water softener is set.  
whether the rinse aid dispenser has been activated/deactivated.  
the start delay that has been set.  
the estimated time remaining for the current dishwashing cycle.  
what type of error has occurred with the dishwasher.  
Programme progress display: The current stage of the programme is  
always shown in the programme progress display.  
The control indicators have the following meanings:  
1)  
SALT  
RINSE AID  
WATER  
FILTER  
Refill with special salt  
Refill with rinse aid  
1)  
Turn on the tap  
Clean the dishwasher's filter system  
The door of the dishwasher is open  
DOOR  
1) These control indicators are never illuminated while a dishwashing cycle is running.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Prior to Using for the First Time  
3 If you wish to use 3 in 1 detergent:  
– First read the section “Using 3in1 detergents.  
– Do not fill up with special salt or rinse aid.  
If you do not use 3in1 detergent, before using for the first time  
1.Set the water softener  
2.Fill up with dishwasher salt  
3.Fill up with rinse aid  
Setting the Water Softener  
The water softener must be set manually and electronically:  
3 To avoid scale deposits on the dishes and in the dishwasher, the dishes  
must be washed with soft water, i.e. water with a low lime content. The  
water softener must be set according to the table to the water hard-  
ness in the area where you live. Your local water company will be able  
to give you information about the water hardness in your area.  
The dishwasher must be switched off.  
Setting manually:  
1.Open the dishwasher door.  
2.Remove the lower basket from the  
dishwasher.  
3.Turn water hardness dial on the left  
wall of the dishwasher interior to O  
or 1 (see table).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting electronically:  
1.Press the ON/OFF button.  
3 If the LED indicator of only one programme button is illuminated, this  
wash programme has been activated. The wash programme must be  
deselected:  
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.  
The LED indicators of all the programme buttons that can be selected  
will illuminate.  
2.Press function buttons 1 and 2 simultaneously and hold them down.  
The LED indicators for function buttons 1 to 3 will flash.  
3.Press function button 1.  
The LED indicator for function button 1 will flash.  
The multi-display will indicate the hardness setting.  
4.Pressing function button 1 increases the hardness setting by 1.  
(Exception: hardness setting 1 follows hardness setting 10).  
5.When the hardness setting is correct, press the ON/OFF button.  
The hardness setting is now saved.  
If the water softener is set electronically to “1”, this switches off the  
control indicator for dishwasher salt.  
Adjusting the hardness  
Water hardness  
Indication on  
the multi-dis-  
play  
setting  
1)  
2)  
in °d  
in mmol/l  
Range  
Manual  
Electronic  
3)  
51 - 70  
43 - 50  
37 - 42  
29 - 36  
23 - 28  
9,0 - 12,5  
7,6 - 8,9  
6,5 - 7,5  
5,1 - 6,4  
4,0 - 5,0  
10  
10L .  
9L  
8L  
7L  
6L  
9
8
7
6
IV  
1
19 - 22  
15 - 18  
3,3 - 3,9  
2,6 - 3,2  
5
4*  
5L  
4L  
III  
11 - 14  
4 - 10  
1,9 - 2,5  
0,7 - 1,8  
II  
3
2
3L  
2L  
0*  
I/II  
1
below 4  
below 0.7  
I
no salt  
necessary  
1L  
1) (°d) German degree, measure of the hardness of water  
2) [mmol/l] millimol per litre, international unit for water hardness  
3) On this setting the length of the dishwashing cycle may be slightly longer.  
*) factory setting  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adding dishwasher Salt  
To decalcify the water softener, it must be filled up with dishwasher  
salt. Use only special salt suitable for domestic dishwashers.  
If you do not use 3 in1 detergent, fill up with dishwasher salt:  
Before using the dishwasher for the first time.  
When the control indicator for dishwasher salt is illuminated on the  
control panel.  
1.Open the door and remove the low-  
er basket.  
2.Unscrew the lid on the salt dispens-  
er by turning it anti-clockwise.  
3.Only when using the dishwasher  
for the first time:  
Fill the salt dispenser with water.  
4.Place the funnel (supplied) over the  
dispenser opening.  
Fill the dispenser with dishwasher  
salt; the capacity of the dispenser is  
approx. 1.0-1.5 kg, depending on  
the size of the grains. Do not overfill  
the dispenser.  
3 If water overflows when filling up with dishwasher salt, this is com-  
pletely harmless.  
5.Clean away any salt remnants from the dispenser opening.  
6.Screw the lid back on in a clockwise direction.  
7.Run a dishwashing cycle after filling the salt dispenser with dish-  
washer salt. This will wash away salt water and salt crystals that have  
been spilt.  
3 Depending on the size of the salt granules, it can take several hours for  
the salt to dissolve in the water and for the control indicator for dish-  
washer salt to go out.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Filling Up with Rinse Aid  
Rinse aid causes the rinse water to flow easily from the crockery leav-  
ing gleaming dishes and glassware.  
If you do not use 3in1 detergent, fill up with rinse aid:  
Before using the dishwasher for the first time.  
When the control indicator for rinse aid is illuminated on the control  
panel.  
Use only special rinse aid for dish-  
washers.  
1.Open the door.  
The rinse aid compartment is locat-  
ed on the inside of the dishwasher  
door.  
2.Press the release button on the rinse  
aid compartment.  
3.Open the cover.  
4.Pour rinse aid in slowly right up to  
the broken “max” line;  
this corresponds to a volume of ap-  
prox. 140 ml when full.  
5.Press the lid shut until it clicks into  
place.  
6.Wipe up any spilt rinse aid with a  
cloth. Otherwise there will be too  
much foam when rinsing.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Amount of Rinse Aid Required  
3 Only change the amount dispensed, if smears, milky spots (reduce the  
amount) or dried on water spots (increase the amount) can be seen on  
glasses and dishes. (See section “If dishwashing results are not satisfac-  
tory.) The dosage can be set from 1-6. The dosage is pre-set to “4” in  
the factory.  
1.Open the dishwasher door.  
2.Press the release button on the rinse  
aid compartment.  
3.Open the cover.  
4.Set the dosage level.  
5.Press the lid shut until it clicks into  
place.  
6.If rinse aid has leaked out, wipe it  
away with a cloth.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Activating rinse aid inflow when 3in1 function is se-  
lected  
3 If the 3in1 function is not selected, the rinse aid inflow is always acti-  
vated.  
If the 3in1 function is selected due to the use of 3in1 detergent, the  
rinse aid inflow is deactivated. If the dishes then do not dry sufficiently,  
you should re-activate the rinse aid inflow (see also section “Using 3in1  
detergents”).  
1.Press the ON/OFF button.  
3 If the LED indicator of only one programme button is illuminated, this  
wash programme has been activated. The wash programme must be  
deselected:  
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.  
The LED indicators of all the programme buttons that can be selected  
will illuminate.  
2.Press function buttons 1 and 2 simultaneously and hold them down.  
The LED indicators for function buttons 1 to 3 will flash.  
3.Press function button 2.  
The LED indicator for function button 2 will flash.  
The multi-display will indicate the current setting:  
0d  
1d  
Rinse aid inflow deactivated when 3in1 on (factory setting)  
Rinse aid inflow activated when 3in1 on  
4.Pressing function button 2 activates and deactivates the rinse aid dis-  
pensing function.  
5.Once the multi-display is indicating the required setting, press the ON/  
OFF button. The setting is now saved.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In daily use  
Loading cutlery and dishes  
1 Sponges, cleaning cloths and any other objects that can absorb water  
must not be washed in the dishwasher. Plastic and Teflon-coated dishes  
and pans tend to retain water droplets. These dishes and pans therefore  
do not dry as well as those made of china and stainless steel.  
For washing in the dishwasher, the following cutlery/dishes/pots and pans  
are not suitable:  
are of limited suitability:  
Cutlery with wooden, horn,  
china or mother of pearl han-  
dles  
Plastic items that are not heat  
resistant  
Older cutlery with cement  
that is sensitive to temperature  
Dishes or cutlery with glued  
parts  
Pewter or copper items  
Lead crystal glass  
Only wash stoneware in the dishwasher if it is  
specifically marked by the manufacturer as  
being dishwasher-safe.  
Glazed patterns may fade if washed very fre-  
quently in the dishwasher.  
Silver and aluminium parts have a tendency to  
discolour during washing. Food remains, e.g.  
egg white, egg yolk and mustard often cause  
discoloration and staining on silver. Therefore  
always clean food residues from silver immedi-  
ately, if it is not to be washed straight after  
use.  
Steel items that rust  
Wooden boards/platters  
Items made from synthetic ma-  
terials  
Glass can become dull after a large number of  
washes.  
Before loading the dishes, you should:  
Remove the worst of the food residues.  
Soak pans with burnt-on food residues.  
When loading the dishes and cutlery, please note:  
Dishes and cutlery must not impede the rotation of the spray arms.  
Load bowls, cups, glasses, pans, etc. with the opening downwards so  
that water cannot collect in them  
Dishes and items of cutlery must not lie inside one another or cover  
one another  
To avoid damage to glasses, they must not touch one another  
Don’t put small items (e.g. lids) in the baskets for the dishes, but in  
the cutlery basket, so that they can’t fall through the holes.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading cutlery  
1 Warning: Sharp knives and other items of cutlery with sharp edges  
must be laid in the cutlery rack or in the upper basket to avoid the risk  
of injury.  
To ensure that all items of cutlery in the cutlery basket can be reached  
by the water, you should:  
1.Place the grid insert on the cut- 2.Place forks and spoons in the  
lery basket  
cutlery basket's grid insert with  
their handles pointing down-  
wards.  
For larger utensils, such as whisks, leave off one half of the cutlery grid.  
The cutlery basket can be opened  
out.  
Always make sure that you put your  
hand around both parts of the two-  
part handle when removing it from  
the dishwasher.  
1.Place the cutlery basket on a table  
or work surface.  
2.Open out the two-part handle.  
3.Remove cutlery.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading / Unloading lower basket and upper basket  
To load and unload, pull out or push  
in the upper and lower baskets in  
the middle using the handle on the  
front of the basket.  
Pots, Pans, Large Plates  
Load larger and heavily soiled dishes  
and pans in the lower basket.  
(Max. diameter for plates 29 cm).  
To make it easier to load larger dish-  
es, all rear plate rests in the lower  
basket can be folded down.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cups, Glasses, Coffee Service  
Load smaller, fragile crockery and  
long, sharp cutlery in the upper bas-  
ket.  
Arrange items of crockery on and  
under the folding cup racks so  
that they are offset from each  
other and water can reach all  
items.  
The cup racks can be folded up  
out of the way for tall crockery  
items.  
Lay or hang wine and brandy  
glasses in the slots in the cup  
racks.  
For glasses with long stems, fold  
the glass rack to the right, other-  
wise fold it away to the left.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The row of spikes on the left of  
the upper basket is also in two  
parts and can be folded away.  
Spikes not folded away: place  
glasses, mugs etc. in the upper  
basket.  
Spikes folded away: More room  
for serving dishes.  
Adjusting the Height of the Upper Basket  
Maximum height of dishes in the  
Upper basket  
Lower basket  
with upper basket raised  
with upper basket lowered  
22 cm  
24 cm  
30 cm  
29 cm  
3 The height of the baskets can also be adjusted when they are loaded.  
Raising / Lowering the upper bas-  
ket  
1.Pull out the upper basket complete-  
ly.  
2.Holding the upper basket by the  
handle, raise it as far as it will go  
and then lower it vertically.  
The upper basket will latch into the  
lower or the upper position.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adding Detergent  
Detergents remove the dirt from  
dishes and cutlery.  
The detergent must be added before  
the cycle starts.  
1 Only use detergent intended for do-  
mestic dishwashers.  
The detergent compartment is lo-  
cated on the inside of the door.  
1.If the lid is closed:  
Press the release button.  
The lid will spring open.  
2.Place the detergent in the detergent  
dispenser. The markings indicate the  
dosing levels for powder detergents:  
“20/30” corresponds to approx.  
20/30 ml of detergent.  
Follow the manufacturer’s instruc-  
tions with regard to dosing and  
storage.  
3.Close the lid and press until it locks  
into place.  
3 In the case of very heavily soiled  
dishes, fill the adjoining compart-  
ment (1) with additional detergent.  
This detergent comes into use during the pre-wash cycle.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Concentrated detergents  
Today’s detergents for dishwashers are almost exclusively low-alkaline  
concentrated detergents with natural enzymes in tablet or powder  
form.  
2 Using 50°C dishwashing cycles in conjunction with these concentrated  
detergents reduces pollution and is good for your dishes, as these dish-  
washing cycles are specially matched to the dirt-dissolving properties  
of the enzymes in concentrated detergents. It is for this reason that us-  
ing 50 °C dishwashing cycles in conjunction with concentrated deter-  
gents can achieve the same cleaning results that can otherwise only be  
achieved using 65 °C cycles.  
Detergent tablets  
3 Detergent tablets from different manufacturers dissolve at different  
rates. For this reason, some detergent tablets do not attain their full  
cleaning power during short cycles. Therefore please use dishwashing  
cycles with pre-wash when using detergent tablets.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using 3in1 detergents  
These products are detergents with a combined cleaning, rinsing and  
salt function.  
When the 3in1 function is activated,  
the addition of special salt and rinse aid from the respective dispenser  
is prevented.  
If the salt and rinse aid dispensers are empty, this is not indicated.  
3 If you want to use 3in1 detergents, check whether these detergents are  
suitable for your water hardness. (Follow the manufacturer’s instruc-  
tions.)  
If you want to use 3in1 products  
1.Press the ON/OFF button.  
2.Press the 3 IN 1 button.  
The button indicator lights up: 3in1 function is selected.  
Before the start of the dishwashing cycle put 3in1 detergent in the de-  
tergent dispenser.  
3 As the rinse aid inflow is automatically switched off when the 3in1  
function is activated, it may come about because of the different qual-  
ity standards in the 3in1 detergent, that the dishes do not dry suffi-  
ciently.  
If this happens, proceed as follows (see section “Adding rinse aid”):  
Fill up the dispenser (if this is empty) with rinse aid.  
Set rinse aid dosage to “2” mechanically.  
Activate rinse aid inflow.  
If you do not want to use 3in1 products any more  
If you want to stop using 3in1 products, please do the following:  
Deactivate the 3in1 function.  
Fill up the dispensers for salt and rinse aid again.  
Switch the water softener to the highest setting and perform up to  
three normal cycles without loading any dishes.  
Then set the water softener to the water hardness in your area.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the dishwashing cycle (Cycle Table)  
Programme  
sequence  
Consumption  
1)  
values  
Dishwashing-  
cycle  
Suitable  
for:  
Type of  
soiling  
Dinner serv-  
ice and  
cookware  
AUTOMATIC  
normally soiled,  
dried-on food remains  
2)  
(50° - 65°)  
Dishes, ex-  
cluding  
saucepans  
30 MIN  
just used, lightly to  
normally soiled  
-
-
-
3)  
(60°)  
heavily soiled,  
Dinner serv-  
ice and  
cookware  
INTENS.  
CARE 70°  
dried-on food re-  
mains, in particular  
protein and starch  
4)  
Dinner serv-  
ice and  
cookware,  
temperature-  
sensitive  
ENERGY  
SAVING (50°)  
normally soiled  
5)  
crockery  
Dessert dish-  
es and coffee  
service, deli- lightly soiled  
cate glass-  
ware  
GLASS  
45°  
-
Used dishes that are  
PREWASH  
All types of  
dishes  
being stored in the  
dishwasher and are to  
be washed later.  
-
-
-
-
6)  
(cold)  
1) The consumption values were obtained under standardised conditions. They depend on how  
full the baskets for the dishes are. Variations are therefore possible in practice.  
2) When using this cycle the degree of water clouding determines the amount of soiling on the  
dishes. The length of the cycle and water and energy consumption can vary greatly – de-  
pending upon the load and how dirty the dishes are. Depending upon the soiling, the tem-  
perature of the water will be automatically adjusted to between 50°C and 65°C.  
3) When using this cycle, only load the dishwasher half full.  
4) During the final rinse, the temperature is increased to 68° for 10 minutes to sanitize e.g. ba-  
bies’ bottles, plastic chopping boards or jam jars.  
5) Test programme for Test Institutes  
6) This cycle does not need any detergent.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a programme  
When your dishes look like this, select:  
an intensive programme.  
a normal or energy-saving pro-  
gramme.  
a short programme (e.g. 30 minute  
programme).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting a Dishwashing Cycle  
1.Check that the spray arms can turn freely.  
2.Turn the water tap on fully.  
3.Close the door.  
4.Press the ON/OFF button.  
5.Select the desired cycle.  
The cycle indicator and the respective cycle stages in the cycle progress  
display will be illuminated. The remaining time expected for the cycle  
will be shown in the multi-display.  
The selected cycle will begin after approximately 3 seconds.  
The current stage of the cycle is always shown in the cycle progress dis-  
play.  
3 During the dishwashing cycle, the remaining time shown in the multi-  
display may be adjusted according to the size of the load, degree of  
soiling, etc.  
Interrupting or Cancelling a dishwashing cycle  
Interrupt a dishwashing cycle that is in progress if it is absolutely nec-  
essary.  
Interrupting the dishwashing programme by opening the dishwash-  
er door  
1 Hot steam may escape when the door is opened. There is a risk of scald-  
ing.  
1.Open the door carefully. The dishwashing cycle will stop.  
2.Close the door. The cycle will continue.  
Cancelling the wash programme  
1.Press function buttons 1 and 2 and hold them down.  
The LED indicators of all the programme buttons that can be selected  
will illuminate.  
2.Release the function buttons. The wash programme has been cancelled.  
3.If you want to start a new wash programme, check whether there is any  
detergent in the dispenser.  
4.Switch off using the ON/OFF button.  
3 Turning off the dishwasher will only interrupt a selected dishwashing  
cycle, not cancel it. The cycle will recommence after turning the dish-  
washer back on again.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Delay Timer  
3 With the delay timer you can delay the start of a dishwashing cycle for  
between 1 and 19 hours.  
1.Press the Delay Timer button repeatedly until the multi-display shows  
the desired time delay, for example 12h, if the cycle is to start in  
12 hours. The Delay Timer indicator is illuminated.  
2.Select dishwashing cycle.  
3.The time remaining to the start of the cycle is continuously displayed  
(e. g. 12h, 11h, 10h, … 1h etc.).  
To change the time delay:  
As long as the cycle has not yet started, you can still change the setting  
by pressing the DELAY TIMER button.  
Cancelling the time delay:  
Press the Delay Timer button repeatedly until the length of the selected  
cycle appears in the multi-display. The selected dishwashing cycle will  
begin immediately.  
To change a dishwashing cycle  
As long as the cycle has not yet started, you can still change the dish-  
washing cycle. First cancel the dishwashing cycle, then re-set the time  
delay, lastly select the new dishwashing cycle.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching Off the dishwasher  
Only switch the dishwasher off when the multi-display indicates “0” for  
the cycle time remaining and the end of programme indicator is illumi-  
nated.  
With some dishwashing cycles, the drying fan continues to run even af-  
ter the end of the cycle.  
1.Press the ON/OFF button. All display indicators will go out.  
2.Turn off the water tap.  
1 Carefully open the door. Hot steam may escape.  
Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for  
about 15 minutes before removing them. You also get a better drying  
result.  
Removing the Dishes  
3 It is normal for the inner door and the dispensers to be damp.  
Empty the lower basket first, then the upper basket. This way you  
avoid dripping water from the upper basket onto dishes in the lower  
basket.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and cleaning  
1 Do not use furniture care products or aggressive cleaners.  
When necessary, clean the dishwasher’s controls with a soft cloth.  
Occasionally check the internal dispensers, door seal and water inlet  
filter (if fitted) for dirt and clean them, if necessary.  
Cleaning the filters  
3 The filters must be regularly checked  
and cleaned. Dirty filters will spoil the  
wash results.  
1.Open the door and remove the lower  
basket.  
2.Turn the handle about ¼ of a turn  
anticlockwise (A) and remove the fil-  
ter system (B).  
3.Grasp the grip hole on the fine filter  
(1) and remove it from the micro-fil-  
ter (2).  
4.Clean all filters thoroughly under  
running water.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.Remove the flat filter (3) from the  
base of the washing compartment  
and clean both surfaces thoroughly.  
6.Re-insert the flat filter.  
7.Place the fine filter in the micro-fil-  
ter and fit the two together.  
8.Insert the filter system in place and  
lock it by turning the handle clock-  
wise as far as it will go. Ensure that  
the flat filter does not protrude  
above the base of the washing com-  
partment.  
1 Under no circumstances may the dishwasher be used without its filters.  
Cleaning the spray arm jets  
Regularly check the jets in the spray  
arms for blockages. When cleaning is  
necessary, remove spray arm from the  
fixture and clean jets with a pointed  
object (wire or needle). Then rinse out  
the spray arm using a strong jet of  
water.  
3 Do not damage the jet opening.  
Upper basket spray arm  
1.To remove upper basket spray arm,  
tilt it down hard.  
2.Clean spray arms jets.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.Place cleaned upper basket spray arm  
back in position against the connect-  
ing piece: press the two together  
firmly, until you feel them snap into  
place.  
Bottom spray arm  
1.To remove bottom spray arm, pull it  
upwards out of its catch.  
2.Clean spray arm jets.  
3.Place bottom spray arm back in posi-  
tion against connecting piece and  
press down firmly, until you feel it  
snap into place.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What to do if...  
Remedying small malfunctions  
If one of the following fault codes is displayed in the multi-display dur-  
ing operation:  
Fault codeÅ10 (Problems with water inlet),  
Fault codeÅ20 (Problems with water drainage),  
please have a look at the following table.  
When the fault is remedied, press the button for the cycle that has  
started. The cycle will continue.  
With other fault codes (“Å” followed by a number):  
Abort the dishwashing cycle.  
Switch the appliance off and on again.  
Re-set the dishwashing cycle.  
If the fault is displayed again, please contact your local Service Force  
Centre and inform them of the fault code.  
Malfunction  
Possible cause  
Remedy  
Water tap is blocked with  
limescale or faulty.  
Check the water tap and  
have it repaired if necessary.  
The tap is turned off.  
Turn the tap on.  
The filter (where present) in  
the threaded hose fitting  
on the tap is blocked.  
The cycle indicator for the  
selected dishwashing cycle  
is flashing:  
Clean the filter in the  
threaded hose fitting.  
the control indicator WA-  
Cancel the dishwashing cy-  
cle (see chapter: Starting a  
dishwashing cycle),  
TER is lit,  
fault code Å10 is dis-  
played in the multi-display  
(Problems with water in-  
let).  
Filters in the base of the  
washing compartment are clean filters (see chapter:  
blocked.  
Cleaning the filters),  
then start the dishwashing  
cycle again.  
Water inflow hose  
has not been correctly posi-  
tioned.  
Check the position of the  
hose.  
The cycle indicator for the The sink outlet is blocked. Clean out sink outlet.  
selected dishwashing cycle  
is flashing,  
fault code Å20 is dis-  
Water drain hose  
has not been correctly posi-  
tioned.  
Check the position of the  
hose.  
played in the multi-display  
(there is water in the dish-  
washer’s internal dispens-  
er).  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Malfunction  
Possible cause  
Remedy  
First shut off the water tap,  
The anti-flood system has then switch off the appli-  
Fault code Å30 is dis-  
played in the multi-dis-  
play.  
been triggered.  
ance and contact the Cus-  
tomer Care Department.  
The control indicator  
DOOR is lit.  
The door of the dishwasher  
is open.  
Close the dishwasher door.  
The indicator FILTER is  
there to remind you to  
check the dishwasher’s fil-  
The indicator goes out auto-  
matically at the start of the  
next dishwashing cycle.  
The control indicator FIL- ters occasionally and to  
TER is lit.  
clean them, if necessary. It  
lights up at regular inter-  
vals, regardless of how  
clean the filters are.  
The mains plug is not  
plugged in.  
Plug in the mains plug.  
Replace the fuse.  
A fuse in the house’s wiring  
system is defective.  
The cycle is not starting.  
For dishwasher models with  
a delay start timer:  
A start time has been se-  
lected.  
If the dishes are to be  
washed immediately, cancel  
the delay start.  
The dishwashing compart-  
ment is made from rust-  
free stainless steel. Rust  
spots in the dishwashing  
compartment are due to  
rust particles from external  
sources (rust particles from  
water pipes, pans, cutlery,  
etc.). Remove such spots  
with a commercially-avail-  
able cleaning product for  
stainless steel.  
Rust spots are visible in  
the dishwashing compart-  
ment.  
Only wash cutlery, dishes  
and pans that are suitable  
for dishwasher use.  
Decalcify appliance with  
commercially available  
agents for cleaning dish-  
washers.  
If the noises can still be  
heard after decalcifying the  
machine, use a different  
brand of detergent for  
washing cutlery and dishes.  
A whistling noise can be  
heard when washing dish-  
es.  
The whistling is not a cause  
for concern.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the Dishwashing Results are not Satisfactory  
The dishes are still dirty.  
The wrong dishwashing cycle was selected.  
The dishes were loaded is such a way that the dishwashing water did  
not reach all items. The baskets for the dishes must not be overload-  
ed.  
The filters in the base of the washing compartment are dirty or incor-  
rectly positioned.  
Good quality detergent was not used, or too little was used.  
In the case of scale deposits on the dishes: The dishwasher salt dis-  
penser is empty or the water softening system has been incorrectly  
set.  
The drain hose is incorrectly positioned.  
Pollutants from the water in the dishwasher can block the jets in the  
spray arms. You have the option of removing the spray arms from  
their fixture for cleaning (see section “Care and Cleaning”).  
The dishes do not dry and are not shining.  
Poor quality rinse aid was used.  
The rinse aid dispenser is empty.  
There are smears, streaks, milky spots or a shiny bluish coating on  
glasses and dishes.  
Lower rinse aid dosage.  
There are dried water drops on the glasses and dishes.  
Increase rinse aid dosage.  
The detergent may be the cause. Contact the detergent manufactur-  
er's customer advice centre.  
Glass corrosion  
Contact the detergent manufacturer's customer advice centre.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disposal  
2 Packaging material  
The packaging materials are environmentally friendly and can be recy-  
cled. The plastic components are identified by markings, e.g. >PE<,  
>PS<, etc. Please dispose of the packaging materials in the appropriate  
container at your local waste disposal facilities.  
2 Old appliance  
The symbol W on the product or on its packaging indicates that this  
product may not be treated as household waste. Instead it shall be  
handed over to the applicable collection point for the recycling of elec-  
trical and electronic equipment. By ensuring this product is disposed of  
correctly, you will help prevent potential negative consequences for the  
environment and human health, which could otherwise be caused by  
inappropriate waste handling of this product. For more detailed infor-  
mation about recycling of this product, please contact your local city  
office, your household waste disposal service or the shop where you  
purchased the product.  
1 Warning! When your appliance has finished its working life, remove  
the plug from the socket. Cut off the cable and plug and dispose of  
them.  
Break the door lock so that the door no longer shuts. This prevents chil-  
dren from trapping themselves inside and endangering their lives.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical data  
Capacity:  
12 place settings including serving dishes  
Permitted water pres-  
sure:  
2
1-10 bar (=10-100 N/cm = 0.1-1.0 MPa)  
230 V, 13 A, also see the rating plate on the right-hand side  
of the dishwasher’s interior door  
Electrical connection:  
Dishwasher: Free-standing appliances  
Dimensions:  
Max. weight:  
850 x 598 x 598 (H x W x D in mm)  
54 kg  
5 This appliance conforms with the following EU Directives:  
73/23/EEC dated 19.02.1973 Low Voltage Directive  
89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending  
Directive 92/31/EEC  
93/68/EEC dated 22.07.1993 CE Marking Directive  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes for Test Institutes  
Testing in accordance with EN 60704 must be carried out with the  
appliance fully loaded and using the test cycle (see “Cycle Table”).  
Tests in accordance with EN 50242 must be carried out when the salt  
dispenser in the water softener and the rinse aid dispenser have been  
filled with salt and rinse aid respectively, and using the test cycle (see  
“Cycle Table”).  
Full load:  
Half load:  
12 place settings  
including serving  
dishes  
6 place settings including  
serving dishes, leaving alter-  
nate positions in the rack free  
Amount of detergent required: 5g + 25g (Type B)  
20g (Type B)  
4 (Type III)  
Rinse aid setting:  
4 (Type III)  
Example loading arrangements:  
*)  
Upper basket  
*) If there are cup racks in place on the lefthand side or the cutlery tray is in place, re-  
move them.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
*)  
Lower basket with cutlery basket  
Cutlery basket  
*) If there are cup racks in place on the lefthand side or if beer glass holders are in  
place, remove them.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection instructions  
1 Safety Information for the Installation  
Only transport the dishwasher in an upright position, otherwise salt  
water may run out.  
Before using the dishwasher for the first time, check for any damage  
caused in transport. Do not under any circumstances connect an ap-  
pliance that is damaged. In the case of damage, please contact your  
supplier.  
Never use the dishwasher if the mains cable, water inlet or drain hose  
are damaged; or if the control panel, work top or plinth area are  
damaged such that the inside of the appliance is freely accessible.  
Always plug the mains plug into a correctly installed shockproof  
socket.  
Permanent connection: a permanent connection must only be in-  
stalled by a trained electrician.  
Prior to using the appliance for the first time, ensure that the rated  
voltage and type of supply on the rating plate match that of the sup-  
ply where the appliance is to be installed. The fuse rating is also to be  
found on the rating plate.  
Multi-way plugs / connectors and extension cables must not be used.  
This could constitute a fire hazard through overheating.  
The dishwasher’s cable must only be replaced by a Service Force Engi-  
neer.  
A water inlet hose with safety valve must only be replaced by a Serv-  
ice Force Engineer.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Dishwasher  
The dishwasher must be installed on a firm floor and adjusted to en-  
sure that it is stable and level in all directions.  
To compensate for unevenness in  
the floor and to match the height  
of the appliance to that of sur-  
rounding units, extend the thread-  
ed feet using a screwdriver.  
The drain hose, inlet hose and  
mains cable must be laid so that  
they are able to move freely within  
the plinth area, and so that they  
are not kinked or crushed when the  
dishwasher is in position.  
The dishwasher must also be  
screwed tightly to the work surface  
or to the adjoining units. This is essential to ensure the dishwasher  
does not tip up.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Free-standing appliances  
1 If the dishwasher is installed directly next to a cooker, a heat-insulat-  
ing, non-flammable panel (laminated with aluminium foil on the side  
next to the cooker) must be fitted flush with the top edge of the work  
surface (depth 57.5 cm).  
If the appliance is built-in under a  
kitchen work surface, the worktop  
supplied with the dishwasher can be  
removed in the following way:  
1.Unscrew the screws from the elbows  
at the rear (1).  
2.Push the appliance’s worktop back-  
wards about 1 cm (2).  
3.Lift the worktop at the front (3) and  
remove it.  
1 If the dishwasher is later used as a free-standing appliance, the work  
surface supplied with it must be re-mounted.  
3 The plinth on free-standing appliances is not adjustable.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the dishwasher  
Connecting to the water supply  
The dishwasher can be connected to cold and hot water supplies up  
to max. 60°C.  
The dishwasher must not be connected to open hot water appliances  
or instantaneous water heaters.  
Permitted water pressure  
Lowest permitted water pressure:  
1 bar (=10 N/cm2 =100 kPa)  
Consult your plumber if the water pres-  
sure is less than 1 bar.  
If the water pressure is greater than 10  
bar, a pressure reduction valve must be  
used (available from your dealer).  
Highest permitted water pressure:  
10 bar (=100 N/cm2 =1 MPa)  
Connecting the inlet hose  
1 The water inlet hose must not be kinked, crushed or entangled when it  
is being connected.  
Connect the threaded hose fitting (ISO 228-1:2000) on the water inlet  
hose to a tap with an external thread (¾ inch). The inlet hose is fitted  
with either a plastic or a metal nut:  
Only tighten the nut hand tight.  
Then do a visual check for water tightness. (Make sure that the tap is  
not dripping.)  
3 So that access to the tap in the kitchen is not restricted by the use of  
the dishwasher, we recommend installing an additional tap, or fitting a  
T-branch to the existing tap.  
If you need a longer water inlet hose than that supplied, the following  
VDE-approved complete hose sets are to be used. These are available  
from your local service centre.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water drainage  
Drain hose  
1 The drain hose must not be kinked, crushed or entangled.  
Connecting the drain hose:  
Maximum permitted height: 1 metre.  
Minimum required height: 40 cm above the bottom edge of the ap-  
pliance.  
Extension hoses  
Extension hoses are available from  
your local Service Force Centre. To  
ensure that the function of the ap-  
pliance is not impeded, the internal  
diameter of extension hoses must  
be 19 mm.  
Extension hoses must not be laid  
more than a maximum distance of  
3 metres horizontally; the maxi-  
mum permitted height for the con-  
nection for the drain hose is then  
85 cm.  
Sink outlet connection  
The outlet of the drain hose (ø 19 mm) fits all commonly available  
sink outlet types. The outer diameter of the sink outlet connection  
must be at least 15 mm.  
The drain hose must be fixed to the sink outlet connection using the  
hose clamp supplied.  
Water drainage if the dishwasher is built-in at high level  
If the dishwasher is installed at a high level, and the drain hose connec-  
tion is less than 30 cm from the lower edge of the appliance, adapter  
kit ET 111099520 must be fitted by your local Service Force Centre.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water drainage into sink (only possible with free-standing appli-  
ances)  
If you wish to hang the drain hose over the edge of a sink, use a de-  
tachable hose elbow. You can obtain this from Service Force by refer-  
ring to spare part number ET 646 069 190.  
1.Fit the elbow to the drain hose.  
2.Secure the drain hose so that it cannot slide off the edge of the sink.  
Pass a piece of cord through the hose elbow and fix it to the wall or the  
tap.  
Anti-flood system  
For protection from water damage, the dishwasher is equipped with a  
anti-flood system.  
In the event of a fault, the safety valve in the water inlet hose immedi-  
ately interrupts the supply of water to the appliance and the drain  
pump is activated. In this way water can neither escape nor overflow.  
The remaining water in the appliance is automatically pumped out.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical Connection  
Any electrical work required to install this appliance should be car-  
ried out by a qualified electrician or competent person.  
1 WARNING - This appliance must be earthed.  
The manufacturer declines any responsibility should these safety  
measures not be observed.  
Before switching on make sure the electricity supply voltage is the  
same as that indicated on the appliance rating plate.  
To isolate the dishwasher from the mains, remove the mains plug.  
Important: The plug must still be accessible after the appliance has  
been installed.  
Changing a fuse  
The appliance is supplied with a 13amp plug fitted. In the event of hav-  
ing to change the fuse in the plug supplied, a 13amp ASTA approved  
(BS 1363A) fuse must be used.  
Green & Yellow  
Should the plug need to be replaced  
for any reason, proceed as described  
below.  
The wires on the mains lead are col-  
oured in accordance with the fol-  
lowing code.  
Blue  
Brown  
Green and Yellow: Earth  
Blue:  
Brown:  
Neutral  
Live  
Cord Clamp  
The wire coloured green and yellow must be connected to the termi-  
nal marked with the letter “E“ or by the earth symbol  
green and yellow.  
or coloured  
The wire coloured blue must be connected to the terminal “N“ or col-  
oured black.  
The wire coloured brown must be connected to the terminal marked  
“L“ or coloured red.  
Upon completion there must be no cut, or stray strands of wire  
present and the cord clamp must be secure over the outer sheath.  
1 WARNING! A cut off plug inserted into a 13 amp socket is a seri-  
ous safety (shock) hazard. Ensure that, if it is necessary to cut off  
the plug, it is disposed of safely and not retained.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting systems  
The water inlet hose, drain hose and the mains cable must all be con-  
nected to the side of the dishwasher as there is no space for them be-  
hind the appliance.  
2 connection pieces 45° or  
straight, outer ø 19 mm,  
length 30 mm  
double valve  
water-  
drainage  
water  
inlet  
water-  
inlet  
mains  
cable  
water-  
drainage  
mains socket  
mains cable  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty conditions  
Great Britain  
Standard guarantee conditions  
We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or  
any part thereof is proved to be defective by reason only of faulty workmanship or materials, we  
will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage  
on condition that:  
The appliance has been correctly installed and used only on the electricity or gas supply stated  
on the rating plate.  
The appliance has been used for normal domestic purposes only, and in accordance with the  
manufacturer's operating and maintenance instructions.  
The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any  
person not authorised by us.  
All service work under this guarantee must be undertaken by a Service Force Centre. Any appli-  
ance or defective part replaced shall become the Company's property.  
This guarantee is in addition to your statutory and other legal rights.  
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available  
outside these hours in which case a premium will be charged.  
Exclusions  
This guarantee does not cover:  
Damage or calls resulting from transportation, improper use or neglect, the replacement of any  
light bulbs or removable parts of glass or plastic.  
Costs incurred for calls to put right an appliance which is improperly installed or calls to appli-  
ances outside the United Kingdom.  
Appliances found to be in use within a commercial environment, plus those which are subject  
to rental agreements.  
Products of AEG manufacture which are not marketed by AEG.  
European Guarantee  
If you should move to another country within Europe then your guarantee moves with you to  
your new home subject to the following qualifications:  
The guarantee starts from the date you first purchased your product.  
The guarantee is for the same period and to the same extent for labour and parts as exists in  
the new country of use for this brand or range of products.  
This guarantee relates to you and cannot be transferred to another user.  
Your new home is within the European Community (EC) or European Free Trade Area.  
The product is installed and used in accordance with our instructions and is only used domesti-  
cally, i.e. a normal household.  
The product is installed taking into account regulations in your new country.  
Before you move please contact your nearest Customer Care centre, listed below, to give them de-  
tails of your new home. They will then ensure that the local Service Organisation is aware of your  
move and able to look after you and your appliances.  
France  
Germany  
Italy  
Sweden  
UK  
Senlis  
+33 (0) 3 44 62 29 29  
+49 (0) 800 234 7378  
+39 (0) 800 117511  
+46 (0) 8 672 5360  
+44 (0) 1753 219899  
Nürnberg  
Pordenone  
Stockholm  
Slough  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service and Spare Parts  
If the event of your appliance requiring service, or if you wish to pur-  
chase spare parts, please contact Service Force by telephoning:  
0870 5 929 929  
Your telephone call will be automatically routed to the Service Force  
Centre covering your post code area.  
For the address of your local Service Force Centre and further informa-  
tion about Service Force, please visit the website at  
Before calling out an engineer, please ensure you have read the details  
under the heading „What to do if...“  
When you contact the Service Force Centre you will need to give the  
following details:  
1. Your name, address and post code.  
2. Your telephone number.  
3. Clear and concise details of the fault.  
4. The model and serial number of the appliance (found on the rating  
plate)  
5. The purchase date.  
Please note that a valid purchase re-  
ceipt or guarantee documentation is  
required for in-guarantee service  
calls.  
Customer Care  
For general enquiries concerning  
your AEG appliance, or for further  
information on AEG products please  
contact our Customer Care Depart-  
ment by letter or telephone at the  
address below or visit our website at www.aeg.co.uk.  
Customer Care Department For Customer Service in the Republic  
AEG Domestic Appliances  
55-77 High Street  
Slough  
Berkshire, SL1 1DZ  
Tel: 08705 350350 (*)  
of Ireland please contact us at the ad-  
dress below:  
AEG/ Electrolux Group (Ire) Ltd  
Long Mile Road/ Dublin 12  
Republic of Ireland  
Tel: +353 (0) 1 4090754  
(*) Calls may be recorded for training purposes  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
From the Electrolux Group. The world´s No.1 choice.  
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor  
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,  
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more  
than 150 countries around the world.  
AEG Hausgeräte GmbH  
Postfach 1036  
D-90327 Nürnberg  
© Copyright by AEG  
822 612 644-00-230305-01  
Subject to change without notice  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Acu Rite Marine Radio 01502BPDI User Manual
AEG Water Heater E User Manual
Air King Vacuum Cleaner AKCV30 User Manual
Alto Shaam Double Oven 1000 SK I User Manual
Amana Oven AO27SE User Manual
American Standard Appliance Trim Kit T50650X User Manual
American Standard Bathroom Aids 10 GPF User Manual
American Standard Plumbing Product 2175503 User Manual
American Standard Plumbing Product T43050X User Manual
Beckett Water Gardening Outdoor Fountain PK35 User Manual