|
HK654200IB
EN INDUCTION HOB
USER MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
CONTENTS
4 Safety information
5 Installation instructions
8 Product description
9 Operating instructions
13 Helpful hints and tips
15 Care and cleaning
15 What to do if…
16 Environment concerns
The following symbols are used in this user
manual:
Important information concerning your
personal safety and information on how to
avoid damaging the appliance.
General information and tips
Environmental information
Subject to change without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Safety information
SAFETY INFORMATION
For your safety and correct operation of the appliance, read this manual carefully before
the installation and use. Always keep these instructions with the appliance also if you move
or sell it. The users must fully know the operation and safety functions of the appliance.
Children and vulnerable people safety
WARNING!
Do not let persons, children included, with reduced physical sensory, reduced mental func-
tions or lack of experience and knowledge to use the appliance. They must have supervision
or instruction for the operation of the appliance by a person who is responsible for their
safety.
• Keep all packaging away from children. There is the risk of suffocation or injury.
• Keep the children away from the appliance during and after the operation, until the ap-
pliance is cold.
WARNING!
Activate the child safety device to prevent small children and pets from an accidental acti-
vation of the appliance.
Safety during operation
• Remove all packaging, stickers and layers from the appliance before the first use.
• Set the cooking zones to "off" after each use.
• The risk of burns! Do not put the objects made of metal, for example cutlery or saucepan
lids, on the surface that you cook. They can become hot.
• The Users with an implanted pacemaker must keep their upper body minimum 30 cm
from induction cooking zones that are activated.
WARNING!
Fire risk! Too hot fats and oils can occur with ignition very quickly.
Correct operation
• Always monitor the appliance during operation.
• The appliance is only for domestic use!
• Do not use the appliance as a work or a storage surface.
• Do not put or keep very flammable liquids and materials, easy fusible objects (made of
plastic or aluminium) on or near the appliance.
• Be careful when you connect the appliance to the near sockets. Do not let the electricity
bonds touch the appliance or hot cookware. Do not let the electricity bonds to tangle.
How to prevent a damage to the appliance.
• If the objects or cookware fall on the glass, the surface can be damaged.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can cause
scratch of the glass. Do not move them on the surface.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
5
• Do not let cookware boil dry to prevent the damage to cookware and glass .
• Do not use the cooking zones with empty cookware or without cookware.
• Do not put the aluminium foil on the appliance.
• Make sure that the airflow space of 5 mm between the worktop and front of the unit
below it stays opened.
WARNING!
If there is a crack on the surface, disconnect power supply to prevent the electrical
shock.
INSTALLATION INSTRUCTIONS
Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The
rating plate of the appliance is on its lower casing.
HK654200IB
949 595 103 00
220-240 V 50-60-Hz Induction 7,4 kW
7,4 kW
58 GAD D5 AU
AEG
The Safety Instructions
WARNING!
You must read these!
• Make sure that the appliance is not damaged because of transportation. Do not connect
a damaged appliance. If it is necessary, speak to the supplier.
• Only an authorized servicing technician can install, connect or repair this appliance. Use
only original spare parts.
• Only use the built-in appliances after you assemble the appliance into correct built-in
units and work surfaces that align to the standards.
• Do not change the specifications or change this product. Risk of injury and damage to
the appliance.
• Fully obey the laws, ordinances, directives and standards in force in the country where
you use the appliance (safety regulations, recycling regulations, electrical safety rules
etc.)!
• Keep the minimum distances to other appliances and units!
• Install shock protection, for example install the drawers only with a protective floor di-
rectly below the appliance!
• Keep safe the cut surfaces of the worktop from moisture with a correct sealant!
• Seal the appliance to the work top with no space between with a correct sealant!
• Keep safe the bottom of the appliance from steam and moisture, e.g. from a dishwasher
or oven!
• Do not install the appliance adjacent to doors and below windows! If not, when you
open the doors or windows they can push off hot cookware from the appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Installation instructions
WARNING!
Risk of injury from electrical current. Carefully obey the instructions for electrical connec-
tions.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket connections can make the terminal become too hot.
• A qualified electrician must install the connections in the clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or
two phase connection.
• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or
higher). Speak to your local Service Centre.
The appliance must have the electrical installation which lets you disconnect the appliance
from the mains at all poles with a contact opening width of minimum 3 mm.
You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
To attach the seal to the rabbet
• Clean the rabbet in the work surface.
• Bond the seal stripe supplied on the upper surface of the rabbet along the edges of the
cut out section.
• Cut the seal stripe into four pieces in relation to the length of the edges of the rabbet.
• For the four corners of the rabbet the ends of the seal stripes must be cut into mitres. Do
not bond the ends over one another.
• Bond the seal stripe flush into the corner of the rabbet. Make sure that no silicon com-
pound can get below the glass ceramic when grouting.
• Do not extend the tapes.
Assembly
min.
500mm
min.
50mm
min.
50mm
min.
5mm
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
7
R10mm
min.
25 mm
R5mm
7mm
min.
20 mm
min.
5 mm
12mm
min. 600mm
584+1mm
560+1mm
490+1mm
514+1mm
min.
38 mm
min.
5 mm
If you use a protection box (the additional acces-
sory1)), the front airflow space of 5 mm and pro-
tective floor directly below the appliance are not
necessary.
You can not use the protection box if you install
the appliance above an oven.
1) The protection box accessory may not be available in some countries. Please contact your local supplier.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Product description
PRODUCT DESCRIPTION
General overview
Induction cooking zone 1800 W, with
Power function 2800 W (minimum
cookware diameter =145mm).
Induction cooking zone 1800 W, with
Power function 2800 W (minimum
cookware diameter =145mm).
Induction cooking zone 1400 W, with
Power function 2500 W (minimum
cookware diameter =125mm).
1
2
1
2
3
180
180
mm
mm
145
210
mm
3
mm
Control panel
4
5
Induction cooking zone 2300 W, with
Power function 3700 W (minimum
cookware diameter =180mm).
5
4
Control panel layout
1
2
3
4
5
10
9
8
7
6
Use the sensor fields to operate the appliance The displays, indicators and sounds tell which
function operate.
sensor field
function
It activates and deactivates the appliance.
It locks/unlocks the control panel.
It shows for which cooking zone you set the time.
It shows the time in minutes.
1
2
3
4
5
6
7
8
9
cooking zones' indicators of timer
the timer display
It activates the Power function.
It shows the heat setting.
a heat setting display
a control bar
/
To set the heat setting.
It increases or decreases the time.
It selects the cooking zone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating instructions
9
sensor field
function
It activates and deactivates STOP+GO
10
Heat setting displays
Display
Description
The cooking zone is deactivated.
The cooking zone operates.
The function operates.
-
The Automatic Heat Up function operates.
Power function operates.
There is a malfunction.
+ digit
OptiHeat Control (3 step Residual heat indicator) : continue cook /
stay warm / residual heat.
/
/
Lock/The Child Safety functions operates.
Not correct cookware or too small or no cookware on the cooking
zone.
The Automatic Switch Off function operates.
OptiHeat Control (3 step Residual heat indicator)
WARNING!
\
\
The risk of burns from residual heat!
OptiHeat Control shows the level of the residual heat. The induction cooking zones make
the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is
hot from the heat of the cookware.
OPERATING INSTRUCTIONS
Activation and deactivation
Touch
for 1 second to activate or deactivate the appliance.
Automatic Switch Off
The function stops the hob automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after you activate the appliance.
• You spill something or put something on the control panel for more than 10 seconds, (a
pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove
the object or clean the control panel.
• The appliance become too hot (e.g. when, a saucepan boils dry). Before you use the hob
again, the cooking zone must be cool.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Operating instructions
• You use not correct cookware. The symbol
vates automatically after 2 minutes.
comes on and the cooking zone deacti-
• You do not deactivate a cooking zone or change the heat setting. After some time,
comes on and the appliance deactivates. See the table.
The times of Automatic Switch Off
Heat setting
-
-
-
-
The cooking zone
deactivates after
6 hours
5 hours
4 hours
1.5 hours
The heat setting
Touch the control bar at the heat setting. Change
to the left or the right, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting.
Automatic Heat Up
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the illustration),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch
(
comes on in the display).
2. Immediately touch the necessary heat setting. After 3 seconds
comes on in the dis-
play.
To stop the function change the heat setting.
Power function
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After, that the induction cooking zone auto-
matically sets back to highest heat setting. To activate, touch
vate, touch a heat setting
,
comes on. To deacti-
-
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating instructions
11
Power management
The power management divides the power be-
tween two cooking zones in a pair (see the illus-
tration). The power function increases the power
to the maximum level for one cooking zone in the
pair. Automatically decreases the power in the
second cooking zone to a lower level. The display
for the reduced zone change between two levels.
Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone: touch
cooking zone comes on.
again and again until the indicator of a necessary
• To activate the Count Down Timer: touch
of the timer to set the time (
-
00 99
minutes). When the indicator of the cooking zone start to flash slow, the time counts
down.
• To see the remaining time: set the cooking zone with
. The indicator of the cooking
zone starts to flash quickly. The display shows the remaining time.
• To change the Count Down Timer: set the cooking zone with
. Touch
or
.
• To deactivate the timer: set the cooking zone with
. Touch . The remaining time
. The indicator of the cooking zone goes out. To deactivate you can
counts back to
also touch
00
and at the same time.
When the countdown comes to an end, the sound operates and
zone deactivates.
flashes. The cooking
00
• To stop the sound: touch
CountUp Timer ( The count up timer)
Use the CountUp Timer to monitor how long the cooking zone operates.
• To set the cooking zone (if more than 1 cooking zone operate ) : touch
again until the indicator of a necessary cooking zone comes on.
again and
• To activate the CountUp Timer: touch of the timer
of the cooking zone starts to flash slow, the time counts up. The display switches be-
tween and counted time (minutes).
• To see how long the cooking zone operates: set the cooking zone with
comes on. When the indicator
. The indica-
tor of the cooking zone starts to flash quickly. The display shows the time that the cook-
ing zone operates.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Operating instructions
• To deactivate the CountUp Timer: set the cooking zone with
deactivate the timer. The indicator of the cooking zone goes out.
and touch
or to
Minute Minder
You can use the timer as a Minute Minder while the cooking zones do not operate. Touch
. Touch
operates and
or of the timer to set the time. When the time comes to an end, the sound
flashes.
00
• To stop the sound: touch
STOP+GO
The
When
The
function sets all cooking zones that operate to the lowest heat setting (
operates, you cannot change the heat setting.
function does not stop the timer function.
).
• To activate this function touch
• To deactivate this function touch
. The symbol
. The heat setting that you set before comes on.
comes on.
Lock
When the cooking zones operate, you can lock the control panel, but not
accidental change of the heat setting.
. It prevents an
First set the heat setting.
To start this function touch
The Timer stays on.
. The symbol
comes on for 4 seconds.
To stop this function touch
. The heat setting that you set before comes on.
When you stop the appliance, you also stop this function.
The child safety device
This function prevents an accidental operation of the appliance.
To activate the child safety device
• Activate the appliance with
. Do not set the heat settings.
• Touch
for 4 seconds. The symbol comes on.
• Deactivate the appliance with
.
To deactivate the child safety device
• Activate the appliance with
The symbol comes on.
• Deactivate the appliance with
. Do not set the heat settings. Touch
for 4 seconds.
.
To override the child safety device for only one cooking time
• Activate the appliance with . The symbol comes on.
for 4 seconds. Set the heat setting in 10 seconds. You can operate the appli-
• Touch
ance.
• When you deactivate the appliance with
, the child safety device operates again.
OffSound Control (Deactivation and activation of the sounds)
Deactivation of the sounds
Deactivate the appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful hints and tips
13
Touch
for 3 seconds. The displays come on and go out. Touch
for 3 seconds.
comes on, the sound is on. Touch
,
comes on, the sound is off.
When this function operates, you can hear the sounds only when:
• you touch
• the Minute Minder comes down
• the Count Down Timer comes down
• you put something on the control panel.
Activation of the sounds
Deactivate the appliance.
Touch
for 3 seconds. The displays come on and go out. Touch
for 3 seconds.
comes on, because the sound is off. Touch
,
comes on. The sound is on.
HELPFUL HINTS AND TIPS
Use the induction cooking zones with correct cookware.
Cookware for induction cooking zones
For induction cooking zones a strong electro-magnetic field creates the heat in the cook-
ware very quickly.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer
(with correct mark from a manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is correct for an induction hob if …
• ... some water boils very quickly on a zone set to the highest heat setting.
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and flat as possible.
Cookware dimensions: induction cooking zones adapt to the dimension of the bottom of
the cookware automatically to some limit.
The noises during operation
If you can hear
• crack noise: cookware is made of different materials (Sandwich construction).
• whistle sound: you use one or more cooking zones with high power levels and the cook-
ware is made of different materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to appliance malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Helpful hints and tips
Energy saving
• If it is possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start it.
Öko Timer (Eco Timer)
To save the energy, the heater of the cooking zone deactivates before the count down timer
signal. The difference in the operation time is depends of the heat setting level and the time
you cook.
The examples of cooking applications
The data in the table is for guidance only.
Heat
Use to:
Time
Hints
Put a lid on a cookware.
Mix from time to time.
Cook with a lid on.
setting
Keep cooked foods warm
as nec-
essary
1
1-3
1-3
3-5
Hollandaise sauce, melt: butter, choco- 5-25
late, gelatine
min
Solidify: fluffy omelettes, baked eggs
10-40
min
Simmer rice and milkbased dishes, heat- 25-50
ing up ready-cooked meals
Add the minimum two times as
much liquid as rice, mix milk dishes
at some point of the procedure
through.
min
5-7
7-9
7-9
9-12
Steam vegetables, fish, meat
Steam potatoes
20-45
min
Add some tablespoons of liquid.
20-60
min
Use max. ¼ l water for 750 g of po-
tatoes.
Cook larger quantities of food, stews
and soups
60-150 Up to 3 l liquid plus ingredients.
min
Gentle fry: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts
as nec-
essary
Turn halfway through.
Turn halfway through.
12-13 Heavy fry, hash browns, loin steaks,
5-15
steaks
min
14
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips.
The Power function is best to heat up large quantities of water.
Information on acrylamides
Important! According to the newest scientific knowledge, if you brown food (specially the
one which contains starch), acrylamides can pose a health risk. Thus, we recommend that
you cook at the lowest temperatures and do not brown food too much.
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and cleaning
15
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
WARNING!
The sharp objects and abrasive cleaning agents can cause damage to the appliance.
For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners.
Scratches or dark stains on the glass-ceramic cause no effect on how the appliance oper-
ates.
To remove the dirt:
1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the
dirt can cause damage to the appliance. Use a special scraper for the glass . Put the
scraper on the glass surface at an acute angle and move the blade on the surface .
– Remove after the appliance is sufficiently cool: limescale rings , water rings, fat
stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic
or stainless steel.
2. Clean the appliance with a moist cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
WHAT TO DO IF…
Problem
Possible cause and remedy
You cannot activate the appli- • Activate the appliance again and set the heat setting in 10
ance or operate it.
seconds.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• The Child Safety Device or the Lock or Stop+Go operates. See
the chapter Operating instructions.
• There is water or fat stains on the control panel. Clean the
control panel.
A Sound operates and the ap-
pliance deactivates.
You put something on one or more sensor fields. Remove the ob-
ject from the sensor fields.
A sound operates when the ap-
pliance is deactivated.
The appliance deactivates.
You put something on the . Remove the object from the sensor
field.
The residual heat indicator does The cooking zone is not hot because it operated only for a short
not comes on.
time. If the cooking zone should be hot, speak to the service cen-
tre.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Environment concerns
Problem
Possible cause and remedy
The Automatic Heat Up func-
tion does not operate.
• There is still residual heat on the cooking zone. Let the cooking
zone become sufficiently cool.
• The highest heat setting is set. The highest heat setting has the
same power as the Automatic Heat Up function.
The heat setting changes be-
tween two levels.
The Power management is activated. See the section Power man-
agement.
The sensor fields become hot.
The cookware is too large or you out it too near to the controls.
Put large cookware on the rear cooking zones if it is necessary.
There is no signal when you
touch the panel sensor fields.
The signals are deactivated. Activate the signals (see OffSound
Control).
The Automatic Switch Off operates. Deactivate the appliance and
activate it again.
comes on
• No cookware on the cooking zone. Put cookware on the cook-
ing zone.
comes on
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for
the cooking zone. Move cookware to a smaller cooking zone.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
and number comes on.
comes on
Connect again. If
comes on again, speak to the service centre.
There is an error in the appliance, because a cookware boils dry or
you use not correct cookware. The protection against become too
hot for the cooking zone operates. The Automatic Switch Off op-
erates.
Deactivate the appliance. Remove the hot cookware. After, ap-
proximately 30 seconds activate the cooking zone again.
should go out of the display, residual heat indicator can stay. Let
the cookware become sufficiently cool and check it with the sec-
tion Cookware for the induction cooking zone.
If you tried the above solutions and cannot repair the problem, speak to your dealer or the
customer service. Give the data from the rating plate, three digit letter code for the glass
ceramic (it is in the corner of the glass surface) and an error message that comes on.
Make sure, you operated the appliance correctly. If not the servicing by a customer service
technician or dealer will not be free of charge, also during the warranty period. The instruc-
tions about the customer service and conditions of guarantee are in the guarantee booklet.
ENVIRONMENT CONCERNS
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
Download from Www.Somanuals.com. All Manuals Search And Download.
17
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging materials are friendly to the environment and can be recycled. The plastic
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as
household waste at the waste disposal facilities in your municipality.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
892934768-C-352011
Download from Www.Somanuals.com. All Manuals Search And Download.
|