| 	
		 Small Form-Factor Pluggable   
					Gigabit Ethernet, Single-Fiber 20 km   
					CLEI: VAUIAL8P _ _   
					Product P/N: 1442120G1   
					Issue Date: 0802   
					Document P/N: 61442120G1-22A   
					DESCRIPTION   
					INSTALLATION   
					The Small Form-Factor Pluggable (SFP) Gigabit Ethernet,   
					Single-Fiber is a bidirectional SFP that plugs into the   
					Central Office Optical Loop Termination (OLT) designed   
					to accept SFPs. The SFP provides a single optical   
					interface to the GigE physical interface. Installed into an   
					appropriate OLT, the SFP provides a Gigabit Ethernet   
					tributary interface to the supporting system.   
					To install the SFP into an appropriate module, complete   
					the following steps:   
					1. Inspect the SFP. If damaged, file a claim with the   
					carrier and then contact ADTRAN Customer Service.   
					2. Do not remove the protective end cap from the SFP   
					until the fiber optic cable is ready to be connected.   
					3. Insert the SFP into the SFP receptacle on the OLT.   
					Ensure the manufacturer’s label on the SFP is facing   
					upward for correct installation.   
					NOTE: To ensure compatibility, refer to the documentation   
					provided with the OLT.   
					4. Slide the SFP all the way into the receptacle until   
					there is an audible “click”.   
					The following features are supported on the SFP:   
					♦ 1000Base-LX 1490 nm Transmitter   
					♦ 1000Base-LX 1310 nm Receiver   
					NOTE: The latch on the SFP is used to remove the SFP from   
					the cage on the circuit card.   
					♦ Optical distance: 20 km maximum   
					5. Continue the installation and turn-up of the OLT   
					using the instructions in the Job Aid that   
					accompanied that OLT. The Installation and   
					Maintenance Practice (I&M) for the OLT is available   
					
					CAUTION: Due to compliance certification requirements,   
					only SFPs supplied by ADTRAN should be used.   
					ADTRAN cannot certify system integrity with   
					other SFPs.   
					Operational Specifications   
					♦ Optical Specifications:   
					– Optical transmit level: –8 dBm to –3 dBm   
					– Optical receive level: –22 dBm to –3 dBm   
					– Optical budget: 14 dB   
					– Optical connectors: LC   
					♦ Extended Environmental Support:   
					– Operational temperature range: –40°C to +85°C   
					– Storage temperature range: –40°C to +85°C   
					– Relative humidity to 95%, noncondensing   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |