3M Home Theater System X21i X26i X30n X31 X31i X35n X36 X36i User Manual

3MDigital Projector  
Control Application Guide Version 4.12  
For Models: X21i / X26i / X30n / X31/ X31i / X35n / X36 / X36i / WX36 /  
WX36i / X46 / X46i / X56 / X62w / X64w / X70 / X75 / X80 / X90 /  
X90K / X90W / X95 / X95i  
Revision History  
Revision Date  
4/2009  
Page(s) Changed  
All pages  
Description of Change  
First edition, models X70, X75, X80, X90, X95, X95i  
Add models X62w, X64w, X30n, X35n  
Add models X31, X36, X46  
4/2010  
6/2010  
All pages  
All pages  
7/2010  
All pages  
Add model WX36  
12/2011  
3/2012  
All pages  
All pages  
Add model X56  
Add model X21i, X26i  
8/2012  
All pages  
Add model X31i, X36i, X46i, WX36i  
Intended Use  
The 3M™ Digital Projectors are designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware, and common line voltages (100V to  
240V AC, 50/60 Hz).The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector, peripheral  
equipment and/or create a potentially unsafe operating condition.  
3M Digital Projectors are designed to operate in a normal office environment.  
100V - 240V AC, 50/60 Hz  
16° to 29° C (60° to 85° F)  
10-80% RH (without condensation)  
0-1828m (0-6000 feet) above sea level  
The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can effect the operation or performance of the  
projector.  
The 3M logo and 3M are trademarks of the 3M Company. Other trademarks used herein are the properties of their respective owners.  
Important Notice  
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or  
completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks  
and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements  
contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.  
Warranty and Limited Remedy  
durability period as stated in the applicable 3M Product Manual in effect at the time of purchase. The warranties stated in the applicable 3M Product Manuals are  
exclusive and are made in place of any and all express or implied warranties or conditions, including any implied warranty of merchantability or fitness for a  
particular purpose, or any industry practice or custom or trade usage. Failure to follow the instructions contained in the appropriate 3M Product Manual or to use  
the 3M Product in accordance with 3M’s Intended Use Statement will void all warranties and limited remedies.  
EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL, 3M SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL,  
SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, REVENUE OR BUSINESS) RESULTING FROM, OR  
IN ANY WAY RELATED TO PERFORMANCE, USE OR INABILITY TO USE ANY OF THE 3M PRODUCT.  
This limitation applies regardless of the legal theory upon which damages are sought. If 3M Product is defective within the applicable warranty period, your  
exclusive remedy shall be, at 3M’s option, to replace or repair the 3M Product or to refund the purchase price of the 3M Product. All replaced parts or products  
become property of 3M. If the 3M Product is repaired, 3M will repair the defective part(s) with a new or used part(s). If the 3M Product is replaced, 3M will replace  
the product with the same or equivalent model and with a new or refurbished product. In the case of an approved warranty claim, the replacement 3M Product will  
carry only the remaining term of the original 3M Product’s warranty period as stated in the applicable 3M Product Manual.  
For warranty service, you must provide proof of the date of the original purchase, otherwise the manufacturing code date will be used to establish the start date of  
the warranty. 3M Product Manuals include durability statements and may include limitations specific to the product(s) being used or its intended applications,  
which take precedence over any statement made here. Warranty terms, limitations and exclusions may differ outside the United States of America.  
3M Mobile Interactive Solutions  
Division  
6801 River Place Boulevard  
Austin, Texas 78726-9000  
Tel: 1-800-328-1371  
© 3M 2012. All Rights Reserved.  
78-6971-1513-3 [Aug. 2012]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
1. INTRODUCTION.......................................................................................................................................... 3  
1.1  
1.2  
OUTLINE................................................................................................................................................. 3  
SYSTEM.................................................................................................................................................. 3  
2. INSTALLATION........................................................................................................................................... 4  
2.1  
2.2  
SYSTEM REQUIREMENTS......................................................................................................................... 4  
PROJECTOR CONTROL INSTALLATION...................................................................................................... 5  
3. OPERATING INSTRUCTIONS.................................................................................................................... 7  
3.1  
3.2  
3.3  
3.4  
3.5  
3.6  
3.7  
3.8  
3.9  
CREATE LOGIN ACCOUNTS ...................................................................................................................... 7  
START APPLICATION............................................................................................................................... 9  
MAIN WINDOW........................................................................................................................................ 9  
EXIT APPLICATION ................................................................................................................................ 10  
APPLICATION MINIMIZATION .................................................................................................................. 11  
CONFIGURE PROJECTOR SETTINGS....................................................................................................... 11  
BUTTONS ............................................................................................................................................. 14  
ADVANCED CONTROL ........................................................................................................................... 15  
IMAGE SEND TO PROJECTOR................................................................................................................. 61  
3.10 MY IMAGE (E-SHOT).......................................................................................................................... 61  
3.11 SOFTWARE VERSION............................................................................................................................. 61  
Microsoft and Windows is the registered trademark of Microsoft Corporation in the US and other countries.  
Pentium is the registered trademark of Intel Corporation in the US and other countries.  
All other trademarks are the property of their respected owners.  
Warning  
This software is free. The manufacturer has no responsibility for any errors that may occur while using this software.  
This software, or any product used with this software may not be used for any act which obstructs the Maintenance  
of the International Peace and Safety.  
© 3M 2012. All Rights Reserved.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Introduction  
1.1 Outline  
The Projector Control Application, PJCtrl is software that allows you to control the projectors on the network or  
connected via RS232C cable. With this application, the Computer can control projectors on the network  
remotely.  
1.2 System  
The following diagram shows a typical network diagram for the Projector Tool.  
RS-232C  
LAN  
HUB  
LAN  
LAN  
LAN  
LAN  
Ethernet  
/ RS-232C  
Converter  
RS-232C  
Use a UTP cable category 5 or higher for a Local Area Network cable.  
Use a cross type cable when using a serial cable.  
The Projector Control Application can control up to 5 of the same model projectors.  
© 3M 2012. All Rights Reserved.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Installation  
2.1 System Requirements  
The minimum System requirements for the Projector Control Application are shown below.  
(1) Operating System  
Windows 2000 Professional  
Windows XP  
Windows Vista Home Basic / Home Premium / Business / Ultimate / Enterprise  
Windows 7 Starter / Home Basic / Home Premium / Professional / Ultimate / Enterprise  
Home Edition / Professional  
(2) CPU  
Pentium3 500MHz or higher  
(3) Memory  
128MB or higher  
(4) Hard disk space  
Minimum 20MB free space for installation  
(5) Serial port  
This port is required to control projectors by RS-232C  
(6) LAN port  
This port is required to control projectors through a network  
© 3M 2012. All Rights Reserved.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.2 Projector Control Installation  
Please follow next steps to install the software into your computer.  
(1) Double click the file “InstForPJCtrl.exe”.  
(2) Select the language (English, Japanese or Chinese  
[Simplified]) during the installation process. And then click  
[OK].  
(3) Click [Next].  
(4) Read “License Agreement” and select “I accept the terms of  
the license agreement” and click [Next] if you agree the  
license agreement. Otherwise, click [Cancel] and stop the  
installation.  
(5) Confirm the program folder, and then click [Next].  
© 3M 2012. All Rights Reserved.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
(6) Confirm the install folder and program folder again, and then  
click [Next].  
(7) Click [Finish] to complete the Projector Control Application  
setup wizard.  
© 3M 2012. All Rights Reserved.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Operating Instructions  
3.1 Create login accounts  
The Projector Control Application requires a login name and password to launch the software. The Projector  
User Administration Tool helps you to create new user accounts.  
3.1.1 How to launch  
Double Click “PJUsrEdit.exe” that is located on same folder  
that you installed Projector Control Application.  
It automatically launches the Projector User Administration  
Tool, if no user accounts are created yet. Also Projector  
Control Application has  
a
short cut [File]  
[User  
Configuration] to launch Projector User Administration Tool.  
3.1.2 How to exit  
Select [File] [Exit] from the menu or click [x] bottom of the top right corner. If the changes are made, you will  
be required to confirm the changes.  
3.1.3 Main Window  
Menu  
User List  
(1) Menu  
Menu  
Sub Menu  
Save  
Exit  
Description  
Save user data  
Exit  
File  
Edit  
Add New User  
Change User  
Delete User  
Create new user  
Edit user account  
Delete user account  
(2) User List  
The status in the User List is described below.  
Row name  
Description  
User Name  
Description  
Man  
Ctrl  
Img  
Username (ID)  
Comment  
” shows that the user can access to the PJMan (Projector Management Tool)  
” shows that the user can access to the PJCtrl (Projector Control Tool)  
” shows that the user can access to the PJImg (Projector Image Tool)  
” shows that the user can access to the PJTransfer (Projector File Transfer Tool).  
FTP  
© 3M 2012. All Rights Reserved.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.1.4 Creating new user account  
Select [Edit] [Add New User] or right clicks on the user list and  
select [Add New User]. The following dialog window appears.  
User Name --- Define user name, up to 20 characters  
Description --- Add comments, up to 50 characters  
User Rights --- Define  
accessibility.  
It  
defines  
the  
accessibility for the application software by  
each user account. The user can use  
allocation only marked application software.  
--- Select all application software.  
Select All  
UnSel All  
--- Unselect all application software.  
Press [OK] button after entering user name. The [Change  
Password] dialog appears. Enter new password and confirm  
entered password. The password is up to 20 characters and case  
sensitive.  
3.1.5 Edit user account  
Double click a username on the user list or select [Edit] [Change  
User] after choosing user to open edit dialog. You can edit  
username, description and accessibility (user rights).  
Click the button to change password. Enter old and new password,  
and re-enter new password to confirm.  
3.1.6 Delete user account  
Select [Edit] [Delete User] or right click on the user list and select [Delete User]. The confirmation window will  
popup.  
3.1.7 Save user account  
Select [File] [Save].  
The date is stored in the file, “C:\Program Files\Common Files\Projector Tools\config \UserList”.  
© 3M 2012. All Rights Reserved.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2 Start Application  
Select Windows [Start] [Program] [Projector Tools] [Projector  
Control Application]. The login window is appeared.  
Enter the username and password that is created by “Projector User  
Administration Tool”. After logged in, a “Configuration” window is  
appeared. Please refer the section 3.6 Configure Projector Settings on  
page 9. Once the configuration is done, click [OK].  
3.3 Main Window  
Click the icon to perform each function. The functions are shown below.  
[About] icon  
[Image Send] icon  
[Advanced] icon  
[Freeze Off] icon  
[Freeze On] icon  
[Mute] icon  
[Volume] icon  
[Blank Off] icon  
[Blank On] icon  
[Input Source] icon  
[Power Off] icon  
[Power On] icon  
[Configuration] icon  
Note: Some icons may not show up depending on the model you choose. For example, [Image Send] icon is  
only for the models CL33X, CL35X, CL67N, CL69N, CL86X, PL90X, PL92X, PL96X, WX36, WX36i, X21i, X26i,  
X30N, X31, X31i, X35N, X35NK, X36, X36i, X46, X46i, X56, X90 and X90K.  
© 3M 2012. All Rights Reserved.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.4 Exit Application  
Right click the PJCtrl icon on the task tray at the right-bottom corner  
and select [exit]. And click [Yes] on the confirmation window. Also  
you can click the [x] icon on the right top corner of main window to  
exit application.  
© 3M 2012. All Rights Reserved.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.5 Application Minimization  
You can hide the main window into the task tray to click the minimization icon on the window. Right click the  
PJCtrl icon on the task tray and select [Show] to restore window.  
3.6 Configure Projector Settings  
You need to setup the projector settings such as connection type and projector model. Click the [Configuration]  
icon to configure settings.  
(1) Projector Model  
Select a projector model that you want to control from the  
drop down list. The icons on the main window and Advanced  
Control items are vary due to the model differences.  
The discovery feature is available on CL33X, CL35X, CL67N,  
CL69N, CL72X, CL73W, CL73X, CL86X, NE7, PL90X,  
PL92X, PL93X, PL95X, PL96X, WX36, WX36i, X21i, X26i,  
X30N, X31, X31i, X35N, X35NK, X36, X36i, X46, X46i, X56,  
X62w, X64w, X90, X90K, X90w, X95, X95K, X95i and X95iK.  
The discovery feature will find all projectors on the network if  
the discovery feature is supported. Once the discovery is  
done, the discovery result is stored in the software and you  
can look up this result from “Configuration” window.  
[NOTE]  
Windows Security Alert will be shown on your display when  
the discovery function activates, if Windows Firewall is “On”  
on Windows XP SP2 or later. Please choose “Unblock” to  
add the software onto the exception list. Also other firewall  
security software may block the discovery function. In that  
case, please add the software to the safe list or disable  
firewall software when you use discovery function.  
© 3M 2012. All Rights Reserved.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(2) Connection Setting  
RS-232C  
--- Check the radio button and choose  
COM port number for serial  
connection.  
NETWORK  
--- Check the radio button for network  
connection. Please enter the IP  
address of projector and port  
number. You can choose the  
projector from the discovered list if  
the discovery function is already run.  
The default port number of PL75X,  
PL80X, X70, X75, X75C, X75K, X80,  
X80C and X80K is 23. The default of  
CL33X, CL35X, CL67N, CL69N,  
CL72X, CL73W, CL73X, CL86X,  
NE7, PL93X, PL96X, WX36, WX36i,  
X21i, X26i, X30N, X31, X31i, X35N,  
X35NK, X36, X36i, X46, X46i, X56,  
X62w, X64w, X90, X90K, X90w, X95,  
X95K, X95i and X95iK is 23 or  
9715. Authentication and Password  
is available for CL33X, CL35X,  
CL67N, CL69N, CL72X, CL73W,  
CL73X, CL86X, NE7, PL90X, PL93X,  
PL95X, PL92X, PL96X, WX36,  
WX36i, X21i, X26i, X30N, X31, X31i,  
X35N, X35NK, X36, X36i, X46, X46i,  
X56, X62w, X64w, X90, X90K, X90w,  
X95, X95K, X95i and X95iK.  
Projector List --- The list shows the projectors that you register.  
[Insert]  
[Update]  
[Delete]  
:
:
:
Insert new projector into the projector list.  
Update selected projector setting and save changes.  
Delete selected projector from the projector list.  
When you manage multiple projectors at the same time, you need to pick one  
projector and select a checkbox in order to be a delegate for displaying CH selection  
and volume level.  
Please rarify IP settings to make sure the PJCtrl is able to communicate with the projector by ping  
command.  
(3) Configure Buttons  
Click the Show Buttons TAB to configure which bottoms  
you want to use. Check the checkbox that you want to  
show as the button. The configuration window can be  
displayed if you make a right click on the task tray icon.  
Icon Size:  
Also you can choose icon size from 24, 36 or 48 dots.  
Always on top:  
“Always on top” option allows that the PJCtrl application  
always show up foreground.  
© 3M 2012. All Rights Reserved.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(4) Option  
Skip user check:  
Check “skip user check” option if you don’t need the  
user login process at application launch. If you need to  
check user account at each time, uncheck this option.  
Skip configuration dialog:  
Check “skip configuration dialog” option if you don’t  
need to show the configuration window at application  
launch.  
User Configuration:  
Launch Projector User Administration Tool.  
Edit CH Label:  
Display Edit CH Label window.  
Configure CH label text that shows underneath each CH icon. The text length is depending on the icon  
size as shown below.  
Icon size 24x24:up to 4 characters  
Icon size 36x36:up to 6 characters  
Icon size 48x48: up to 8 characters  
This is an example how CH label is looks like.  
Update Interval:  
Set the interval period to update CH status from the projector.  
© 3M 2012. All Rights Reserved.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.7 Buttons  
Power ON:  
Power the projector on.  
Power OFF:  
Power the projector off.  
Input Source:  
Switch the input source (CH).  
The icon of current input channel is shown as “selected” icon (hollow). When you manage multiple projectors,  
the status of delegated projector is shown.  
Blank ON:  
Blank the screen.  
Blank OFF:  
Un-blank the screen.  
Volume:  
Volume up and down. The control bar appears when you click the icon. When you manage multiple projectors,  
the delegated projector’s value is displayed. Please note that the value may not the same among multiple  
projectors.  
Mute:  
Sound mute. Toggled.  
Freeze ON:  
Freeze image.  
Freeze OFF:  
Unfreeze image.  
© 3M 2012. All Rights Reserved.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.8 Advanced Control  
You can access the advanced control functions through Advanced Control Menu.  
Click the “ADV” icon to open the advanced control window. Choose the target  
projector to control.  
Advanced control items are depending on the projector model.  
PL80X / X70 / X80 / X80C / X80K  
[STATUS] Tab  
Function  
Power  
General Description  
Displays the current power status.  
Off / On / Cool down  
Input Source  
Error Status  
Displays the current input source.  
M1-D / RGB / BNC / Video / S-Video / Component  
Displays the current error status.  
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Lamp Time Error /  
Cold Error / Filter Error / Other Error  
Displays the current blank on/off status.  
Off / On  
Blank On /Off  
Mute  
Displays the current mute status.  
Off / On  
Freeze  
Displays the current freeze status.  
Normal / Freeze  
Lamp Time  
Filter Time  
Reset  
Displays the usage time for the current lamp.  
Displays the usage time for the current filter.  
Initialize the selected function.  
Lamp Time / Filter Time  
[Execute]: After the confirmation message, the selected function will be initialized.  
[MAIN] Tab  
Function  
Bright  
General Description  
Adjusts the brightness.  
[-]: Decrease the brightness value.  
[+]: Increase the brightness value.  
Contrast  
Adjusts the contrast.  
[-]: Decrease the contrast value.  
[+]: Increase the contrast value.  
Aspect  
Switches the mode for aspect ratio.  
4:3 / 16:9 / Small / Normal  
Whisper  
Mirror  
Turn off/on the whisper mode.  
Normal / Whisper  
Switches the mode for mirror status.  
Normal / H:Invert / V:Invert / H&V:Invert  
Switches the menu language.  
Language  
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /  
Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish  
Initialize the selected function.  
Reset  
Bright / Contrast  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[PICTURE-1] Tab  
Function  
Gamma  
General Description  
Switches the gamma mode.  
Normal / Cinema / Dynamic / Custom  
Custom Gamma  
Adjusts the gamma data.  
[-]: Decrease the gamma value.  
[+]: Increase the gamma value.  
Color Temp  
Switches the color temperature mode.  
Low / Middle / High / User  
Custom User R  
Custom User G  
Custom User B  
Color Bal R  
Adjusts the red color level for the user mode of red color temperature.  
100 / 90 / 80 / 70 / 60 / 50  
Adjusts the green color level for the user mode of green color temperature.  
100 / 90 / 80 / 70 / 60 / 50  
Adjusts the blue color level for the user mode of blue color temperature.  
100 / 90 / 80 / 70 / 60 / 50  
Adjusts the red color balance.  
[-]: Decrease the red color balance value.  
[+]: Increase the red color balance value.  
Adjusts the green color balance.  
[-]: Decrease the green color balance value.  
[+]: Increase the green color balance value.  
Adjusts the blue color balance (blue).  
[-]: Decrease the blue color balance value.  
[+]: Increase the blue color balance value.  
Adjusts the sharpness.  
[-]: Decrease the sharpness value.  
[+]: Increase the sharpness value  
Adjusts the strength of whole color.  
[-]: Decrease the color value.  
Color Bal G  
Color Bal B  
Sharpness  
Color  
[+]: Increase the color value  
Tint  
Adjusts the tint.  
[-]: Decrease the tint value.  
[+]: Increase the tint value.  
My Memory  
Loads the data from the memory.  
Load1 / Load2 / Load3 / Load4  
Saves the current adjustment data into the memory.  
Save1 / Save2 / Save3 / Save4  
[Execute]: Performs each function.  
Reset  
Initialize the selected function.  
Color Bal R / Color Bal G / Color Bal B / Sharpness / Color / Tint  
[Execute]: After the confirmation message, the selected function will be initialized.  
[PICTURE-2] Tab  
Function  
Position  
General Description  
Adjust the display position.  
[
[
[
[
]: Increase the vertical position value.  
]: Decrease the vertical position value.  
]: Increase the horizontal position value.  
]: Decrease the horizontal position value.  
H Phase  
H Size  
Adjust the horizontal phase to eliminate flicker.  
[-]: Decrease the horizontal phase value.  
[+]: Increase the horizontal phase value.  
Adjust the horizontal size.  
[-]: Decrease the horizontal size value.  
[+]: Increase the horizontal size value.  
Adjust the over-scan ratio.  
[-]: Decrease the over-scan value.  
[+]: Increase the over-scan value.  
Over Scan  
Reset  
Initialize the selected function.  
V Position / H Position / H Size / Over Scan  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[INPUT] Tab  
Function  
General Description  
Color Space  
Switches the mode for color space.  
Auto / RGB / SMPTE240 / REC709 / REC601  
Switches the function of the COMPONENT port.  
Component / Scart RGB  
Switches the mode for video format.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Turns off/on the 3D-YCS.  
Component  
Video Format  
3D-YCS  
Off / On  
Video NR  
Switches the noise reduction mode.  
Low / Middle / High  
S2-Aspect  
Turns off/on the S2-aspect function  
Off / On  
P.IN P. Input  
P.IN P. Position  
P.IN P. Audio  
P.IN P. Size  
Power Up Input  
Switches the signal input port for the child window.  
Video / S-Video  
Switches the display position of the child window.  
Upper Left / Upper Right / Bottom Left / Bottom Right  
Switches the audio source of the child window.  
RGB / Video  
Switches the display size of the child window.  
Off / Large / Small  
Switches the signal input port to display just when the projector is turned on.  
Last Input / M1-D / RGB / BNC / Component / S-Video / Video  
[AUTO] Tab  
Function  
Adjust  
Power Off  
General Description  
[Execute]: Performs the automatic adjustment feature.  
Adjusts the time to count down to automatically turn the projector off.  
[-]: Decrease auto power off time.  
[+]: Increase auto power off time.  
Power On  
Search  
Turns off/on the auto power on function.  
Off / On  
Turns off/on the automatic signal search function.  
Off / On  
[SCREEN] Tab  
Function  
Blank  
General Description  
Switches the mode for the blank screen.  
Blue / White / Black / MyScreen / Original  
Switches the mode for the start-up screen.  
Original / Off / MyScreen  
Start Up  
MyScreen Size  
MyScreen Lock  
Menu Position  
Switches the size of the MyScreen.  
Full / x1  
Turn off/on the MyScreen lock function.  
Off / On  
Adjusts the menu position.  
[
[
[
[
]: Increase the vertical menu position value.  
]: Decrease the vertical menu position value.  
]: Decrease the horizontal menu position value.  
]: Increase the horizontal menu position value.  
Message  
Reset  
Turns off/on the message function.  
Off / On  
Initialize the selected function.  
Menu Position V / Menu Position H  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[OPTION] Tab  
Function  
Volume  
General Description  
Adjusts the volume.  
[-]: Decrease the volume value.  
[+]: Increase the volume value.  
Turns off/on the built-in speaker.  
Off / On  
Speaker  
IR Remote  
Turns off/on the remote sensor.  
Front (Off / On)  
Rear (Off / On)  
Top (Off / On)  
IR Remote ID  
Auto Adjust  
Lens Type  
Lens Lock  
Switches the number as an ID number for remote control.  
All / 1 / 2 / 3  
Switches the auto adjustment enable function.  
Disable / Enable  
Switches the lens type currently used.  
Auto / 1 / 2 / 3 / 4 / 5  
Turns off/on the lens lock function.  
Off / On  
[OTHER] Tab  
Function  
Power  
General Description  
Turns off/on the power.  
Off / On  
Input Source  
Blank On / Off  
Mute  
Switchs the input source.  
M1-D / RGB / BNC / Video / S-Video / Component  
Turns off/on the blank.  
Off / On  
Turns off/on the mute.  
Off / On  
Freeze  
Turn off/on the freeze.  
Normal / Freeze  
Magnify  
Adjusts the magnify setting.  
[-]: Decrease the magnify value.  
[+]: Increase the magnify value.  
Adjusts the vertical keystone distortion.  
[-]: Decrease the vertical keystone value.  
[+]: Increase the vertical keystone value.  
Adjusts the horizontal keystone distortion.  
[-]: Decrease the horizontal keystone value.  
[+]: Increase the horizontal keystone value.  
Initialize the selected function.  
Keystone V / Keystone H  
Keystone V  
Keystone H  
Reset  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PL75X / X75 / X75C / X75K  
[STATUS] Tab  
Function  
Power  
General Description  
Displays the current power status.  
Off / On / Cool down  
Input Source  
Error Status  
Displays the current input source.  
DVI / RGB1 / RGB2 / Video / S-Video / Component  
Displays the current error status.  
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Lamp Time Error /  
Cold Error / Filter Error / Other Error  
Displays the current blank on/off status.  
Off / On  
Blank On / Off  
Mute  
Displays the current mute status.  
Off / On  
Freeze  
Displays the current freeze status.  
Normal / Freeze  
Lamp Time  
Filter Time  
Reset  
Displays the usage time for the current lamp.  
Displays the usage time for the current filter.  
Initialize the selected function.  
Lamp Time / Filter Time  
[Execute]: After the confirmation message, the selected function will be initialized.  
[PICTURE] Tab  
Function  
Bright  
General Description  
Adjusts the brightness.  
[-]: Decrease the brightness value.  
[+]: Increase the brightness value.  
Adjusts the contrast.  
Contrast  
[-]: Decrease the contrast value.  
[+]: Increase the contrast value.  
Switches the gamma mode.  
#1-Custom / #2-Custom / #3-Custom / #1-Default / #2-Default / #3-Default  
Switches the mode of color temperature.  
Low / Middle / High / Custom  
Gamma  
Color Temp  
Color  
Adjusts the strength of whole color.  
[-]: Decrease the color value.  
[+]: Increase the color value  
Tint  
Adjusts the tint.  
[-]: Decrease the tint value.  
[+]: Increase the tint value.  
Sharpness  
My Memory  
Adjusts the sharpness.  
[-]: Decrease the sharpness value.  
[+]: Increase the sharpness value.  
Loads the data on the memory.  
Load1 / Load2 / Load3 / Load4  
Saves the current adjustment data into the memory.  
Save1 / Save2 / Save3 / Save4  
[Execute]: Performs each function.  
Reset  
Initialize the selected function  
Bright / Contrast / Color / Tint / Sharpness  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gamma - Custom -  
Function  
General Description  
User Gamma Pattern  
Changes the test pattern.  
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp  
User Gamma Point 1  
User Gamma Point 2  
User Gamma Point 3  
User Gamma Point 4  
User Gamma Point 5  
User Gamma Point 6  
User Gamma Point 7  
User Gamma Point 8  
Adjusts the user gamma point 1.  
[-]: Decrease the user gamma point 1 value.  
[+]: Increase the user gamma point 1 value.  
Adjusts the user gamma point 2.  
[-]: Decrease the user gamma point 2 value.  
[+]: Increase the user gamma point 2 value.  
Adjusts the user gamma point 3.  
[-]: Decrease the user gamma point 3 value.  
[+]: Increase the user gamma point 3 value.  
Adjusts the user gamma point 4.  
[-]: Decrease the user gamma point 4 value.  
[+]: Increase the user gamma point 4 value.  
Adjusts the user gamma point 5.  
[-]: Decrease the user gamma point 5 value.  
[+]: Increase the user gamma point 5 value.  
Adjusts the user gamma point 6.  
[-]: Decrease the user gamma point 6 value.  
[+]: Increase the user gamma point 6 value.  
Adjusts the user gamma point 7.  
[-]: Decrease the user gamma point 7 value.  
[+]: Increase the user gamma point 7 value.  
Adjusts the user gamma point 8.  
[-]: Decrease the user gamma point 8 value.  
[+]: Increase the user gamma point 8 value.  
Color Temp - Custom -  
Function  
General Description  
User Gamma Pattern  
Changes the test pattern.  
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp  
Color Temp Gain R  
Color Temp Gain G  
Color Temp Gain B  
Color Temp Offset R  
Color Temp Offset G  
Color Temp Offset B  
Adjusts the red color temperature gain.  
[-]: Decrease the red color temp gain value.  
[+]: Increase the red color temp gain value.  
Adjusts the green color temperature gain.  
[-]: Decrease the green color temp gain value.  
[+]: Increase the green color temp gain value.  
Adjusts the blue color temperature gain.  
[-]: Decrease the blue color temp gain value.  
[+]: Increase the blue color temp gain value.  
Adjusts the red color temperature offset.  
[-]: Decrease the red color temperature offset value.  
[+]: Increase the red color temperature offset value  
Adjusts the green color temperature offset.  
[-]: Decrease the green color temperature offset value.  
[+]: Increase the green color temperature offset value  
Adjusts the blue color temperature offset.  
[-]: Decrease the blue color temperature offset value.  
[+]: Increase the blue color temperature offset value  
[IMAGE] Tab  
Function  
Aspect  
General Description  
Switches the mode for aspect ratio.  
4:3 / 16:9 / Small / Normal  
Over Scan  
Position  
Adjusts the over-scan ratio.  
[-]: Decrease the over-scan value.  
[+]: Increase the over-scan value.  
Adjusts the display position.  
[
[
[
[
]: Increase the vertical position value.  
]: Decrease the vertical position value.  
]: Increase the horizontal position value.  
]: Decrease the horizontal position value.  
H Phase  
H Size  
Adjusts the horizontal phase to eliminate flicker.  
[-]: Decrease the horizontal phase value.  
[+]: Increase the horizontal phase value.  
Adjusts the horizontal size.  
[-]: Decrease the horizontal size value.  
[+]: Increase the horizontal size value.  
Auto Adjust  
Reset  
[Execute]: Performs the automatic adjustment feature.  
Initialize the selected function.  
Over Scan / V Position / H Position / H Size  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[VIDEO QLTY.] Tab  
Function  
General Description  
Progressive  
Switches the progress mode.  
Off / TV / Film  
3D-YCS  
Switches the 3D-YCS mode.  
Off / Normal / Still Image  
Switches the noise reduction mode.  
Low / Middle / High  
Video NR  
[INPUT] Tab  
Function  
General Description  
Color Space  
Switches the mode for color space.  
Auto / RGB / SMPTE240 / REC709 / REC601  
Switches the function of COMPONENT VIDEO port.  
Component / Scart RGB  
Switches the mode for video format.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Select a signal source of the DVI-D port.  
DVD / Computer  
Component  
Video Format  
DVI  
[SETUP] Tab  
Function  
Whisper  
General Description  
Turns off/on the whisper mode.  
Normal / Whisper  
Mirror  
Switches the mode for mirror status.  
Normal / H:Invert / V:Invert / H&V:Invert  
Adjusts the volume.  
Volume  
[-]: Decrease the volume value.  
[+]: Increase the volume value.  
Switches the internal speaker output mode.  
Mono / Stereo  
Stereo  
IR Remote  
Turns off/on the remote sensor.  
Front (Off / On)  
Top (Off / On)  
[SCREEN] Tab  
Function  
General Description  
Language  
Switches the OSD (On Screen Display) language.  
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /  
Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese  
Adjusts the menu position.  
Menu Position  
OSD Bright.  
[
[
[
[
]: Increase the vertical menu position value.  
]: Decrease the vertical menu position value.  
]: Decrease the horizontal menu position value.  
]: Increase the horizontal menu position value.  
Switches the brightness level of the OSD (On Screen Display).  
[-]: Decrease the OSD brightness value.  
[+]: Increase the OSD brightness value.  
Switches the mode for the blank screen.  
Blue / White / Black / MyScreen / Original  
Switches the mode for the start-up screen.  
Original / Off / MyScreen  
Turns off/on the MyScreen lock function.  
Off / On  
Turns off/on the message function.  
Off / On  
Blank  
Start Up  
MyScreen Lock  
Message  
Reset  
Initialize the selected function.  
Menu Position V / Menu Position H  
[Execute]: After the confirmation message, the selected function will be initialized.  
[OPTION] Tab  
Function  
General Description  
One Touch  
Turns off/on the automatic keystone correction function.  
Off / On  
Auto Search  
Auto Off  
Turns on/off the automatic signal search function.  
Off / On  
Adjusts the time to count down to automatically turn the projector off.  
[-]: Decrease the auto power off time.  
[+]: Increase the auto power off time.  
Disable/Enable the automatic adjustment.  
Disable / Enable  
Auto Adjust  
© 3M 2012. All Rights Reserved.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[OTHER] Tab  
Function  
Power  
General Description  
Turns off/on the Power.  
Off / On  
Input Source  
Mode  
Switches the input source.  
DVI / RGB1 / RGB2 / Video / S-Video / Component  
Switches the mode of picture type.  
Normal / Cinema / Dynamic / Custom  
Custom is displayed only. It cannot be set.  
Turns off/on the blank.  
Blank On / Off  
Mute  
Off / On  
Turns off/on the mute.  
Off / On  
Freeze  
Turns off/on the freeze.  
Normal / Freeze  
Magnify  
Adjusts the magnify setting.  
[-]: Decrease the magnify value.  
[+]: Increase the magnify value.  
Adjusts the vertical keystone distortion.  
[-]: Decrease the vertical keystone value.  
[+]: Increase the vertical keystone value.  
Adjusts the horizontal keystone distortion.  
[-]: Decrease the horizontal keystone value.  
[+]: Increase the horizontal keystone value.  
[Execute]: Performs the automatic keystone distortion correction.  
Keystone V  
Keystone H  
Auto Keystone  
Reset  
Initialize the selected function.  
Keystone V / Keystone H  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK  
[STATUS] Tab  
Function  
Power  
General Description  
Displays the current power status.  
Off / On / Cool down  
Input Source  
Displays the current input source.  
X62w  
RGB1 / RGB2 / Video / S-Video / Component / MIU  
X64w  
Computer1 / Computer2 / Video / S-Video / Component / MIU  
PL90X / X90 / X90K  
RGB1 / RGB2 / M1-D / Video / S-Video / Component  
X90w  
RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU  
PL95X / X95 / X95K / X95i / X95iK  
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU  
Displays the current error status.  
Error Status  
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Lamp Time Error /  
Cold Error / Filter Error / Other Error  
Displays the current blank on/off status.  
Off / On  
Displays the current mute status.  
Off / On  
Blank On / Off  
Mute  
Freeze  
Displays the current freeze status.  
Normal / Freeze  
Lamp Time  
Filter Time  
Reset  
Displays the usage time for the current lamp.  
Displays the usage time for the current filter.  
Initialize the selected function.  
Lamp Time / Filter Time  
[Execute]: After the confirmation message, the selected function will be initialized.  
[PICTURE] Tab  
Function  
General Description  
Brightness  
Adjusts the brightness.  
[-]: Decrease the brightness value.  
[+]: Increase the brightness value.  
Contrast  
Gamma  
Adjusts the contrast.  
[-]: Decrease the contrast value.  
[+]: Increase the contrast value.  
Switches the gamma mode.  
PL90X / X62w / X90 / X90K / X90w  
#1-Custom / #2-Custom / #3-Custom / #4-Custom / #5-Custom /  
#1-Default / #2-Default / #3-Default / #4-Default / #5-Default  
PL95X / X64w / X95 / X95K / X95i / X95iK  
#1-Custom / #2-Custom / #3-Custom / #4-Custom / #5-Custom / #6-Custom /  
#1-Default / #2-Default / #3-Default / #4-Default / #5-Default / #6-Default  
Switches the color temperature mode.  
PL90X / X62w / X90 / X90K / X90w  
Color Temp  
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Custom-High / Custom-Mid / Custom-Low /  
Custom-Hi-Bright-1 / Custom-Hi-Bright-2  
PL95X / X64w / X95 / X95K / X95i / X95iK  
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / Custom-High / Custom-Mid / Custom-Low /  
Custom-Hi-Bright-1 / Custom-Hi-Bright-2 / Custom-Hi-Bright-3  
Adjusts the strength of whole color.  
Color  
[-]: Decrease the color value.  
[+]: Increase the color value  
Tint  
Adjusts the tint.  
[-]: Decrease the tint value.  
[+]: Increase the tint value.  
Sharpness  
Active Iris  
My Memory  
Adjusts the sharpness.  
[-]: Decrease the sharpness value.  
[+]: Increase the sharpness value.  
Changes the active iris control mode.  
Off / Theater / Presentation  
This function is not displayed for X62w / X64w.  
Loads the data from the memory.  
Load1 / Load2 / Load3 / Load4  
Saves the current adjustment data into the memory.  
Save1 / Save2 / Save3 / Save4  
[Execute]: Performs each function.  
Reset  
Initialize the selected function  
Brightness / Contrast / Color / Tint / Sharpness  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gamma - Custom -  
Function  
General Description  
User Gamma Pattern  
Changes the test pattern.  
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp  
User Gamma Point 1  
User Gamma Point 2  
User Gamma Point 3  
User Gamma Point 4  
User Gamma Point 5  
User Gamma Point 6  
User Gamma Point 7  
User Gamma Point 8  
Adjusts the user gamma point 1.  
[-]: Decrease the user gamma point 1 value.  
[+]: Increase the user gamma point 1 value.  
[Reset]: Initialize the user gamma point 1 value.  
Adjusts the user gamma point 2.  
[-]: Decrease the user gamma point 2 value.  
[+]: Increase the user gamma point 2 value.  
[Reset]: Initialize the user gamma point 2 value.  
Adjusts the user gamma point 3.  
[-]: Decrease the user gamma point 3 value.  
[+]: Increase the user gamma point 3 value.  
[Reset]: Initialize the user gamma point 3 value.  
Adjusts the user gamma point 4.  
[-]: Decrease the user gamma point 4 value.  
[+]: Increase the user gamma point 4 value.  
[Reset]: Initialize the user gamma point 4 value.  
Adjusts the user gamma point 5.  
[-]: Decrease the user gamma point 5 value.  
[+]: Increase the user gamma point 5 value.  
[Reset]: Initialize the user gamma point 5 value.  
Adjusts the user gamma point 6.  
[-]: Decrease the user gamma point 6 value.  
[+]: Increase the user gamma point 6 value.  
[Reset]: Initialize the user gamma point 6 value.  
Adjusts the user gamma point 7.  
[-]: Decrease the user gamma point 7 value.  
[+]: Increase the user gamma point 7 value.  
[Reset]: Initialize the user gamma point 7 value.  
Adjusts the user gamma point 8.  
[-]: Decrease the user gamma point 8 value.  
[+]: Increase the user gamma point 8 value.  
[Reset]: Initialize the user gamma point 8 value.  
Color Temp - Custom -  
Function  
General Description  
User Gamma Pattern  
Changes the test pattern.  
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp  
Color Temp Gain R  
Color Temp Gain G  
Color Temp Gain B  
Color Temp Offset R  
Color Temp Offset G  
Color Temp Offset B  
Adjusts the red color temperature gain.  
[-]: Decrease the red color temperature gain value.  
[+]: Increase the red color temperature gain value.  
[Reset]: Initialize the red color temperature gain value.  
Adjusts the green color temperature gain.  
[-]: Decrease the green color temperature gain value.  
[+]: Increase the green color temperature gain value.  
[Reset]: Initialize the green color temperature gain value.  
Adjusts the blue color temperature gain.  
[-]: Decrease blue red color temperature gain value.  
[+]: Increase the blue color temperature gain value.  
[Reset]: Initialize the blue color temperature gain value.  
Adjusts the red color temperature offset.  
[-]: Decrease the red color temperature offset value.  
[+]: Increase the red color temperature offset value.  
[Reset]: Initialize the red color temperature offset value.  
Adjusts the green color temperature offset.  
[-]: Decrease the green color temperature offset value.  
[+]: Increase the green color temperature offset value.  
[Reset]: Initialize the green color temperature offset value.  
Adjusts the blue color temperature offset.  
[-]: Decrease the blue color temperature offset value.  
[+]: Increase the blue color temperature offset value.  
[Reset]: Initialize the blue color temperature offset value.  
© 3M 2012. All Rights Reserved.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[IMAGE] Tab  
Function  
Aspect  
General Description  
Switches the mode for aspect ratio.  
4:3 / 16:9 / 14:9 / Small / Normal  
Adjusts the over-scan ratio  
[-]: Decrease the over-scan value.  
[+]: Increase the over-scan value.  
Adjusts the display position.  
Over Scan  
Position  
[
[
[
[
]: Increase the vertical position value.  
]: Decrease the vertical position value.  
]: Increase the horizontal position value.  
]: Decrease the horizontal position value.  
H Phase  
H Size  
Adjusts the horizontal phase to eliminate flicker.  
[-]: Decrease the horizontal phase value.  
[+]: Increase the horizontal phase value.  
Adjusts the horizontal size.  
[-]: Decrease the horizontal size value.  
[+]: Increase the horizontal size value.  
Auto Adjust  
Reset  
[Execute]: Performs the automatic adjustment feature.  
Initialize the selected function.  
Over Scan / V Position / H Position / H Size  
[Execute]: After the confirmation message, the selected function will be initialized.  
[INPUT] Tab  
Function  
General Description  
Progressive  
Switches the progress mode.  
Off / TV / Film  
Video NR  
3D-YCS  
Switches the noise reduction mode.  
Low / Mid / High  
Switches the 3D-YCS mode.  
Off / Movie / Still  
This function is not displayed for X62w / X64w.  
Color Space  
Switches the mode for color space.  
Auto / RGB / SMPTE240 / REC709 / REC601  
Switches the function of the COMPONENT port.  
Component / Scart RGB  
Component  
Video Format - Video  
Video Format – S-Video  
HDMI  
Switches the mode for video format of the VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Switches the mode for video format of the S-VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Changes the HDMI signal mode.  
Auto / Normal / Enhanced  
This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w.  
M1-D  
Changes the M1-D signal mode.  
Normal / Enhanced  
This function is not displayed for PL95X / X62w / X64w / X95 / X95K / X95i / X95iK.  
Frame Lock  
Turns off/on the frame lock function.  
Off / On  
This function is not displayed for PL95X / X64w / X95 / X95K / X95i / X95iK.  
Turns the frame lock function off/on of the RGB IN1 port.  
Off / On  
This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w.  
Turns the frame lock function off/on of the COMPUTER IN1 port.  
Off / On  
Frame Lock - RGB1  
Frame Lock-Computer1  
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /  
X95iK.  
Frame Lock - RGB2  
Turns the frame lock function off/on of the RGB IN2 port.  
Off / On  
This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w.  
Turns the frame lock function off/on of the COMPUTER IN2 port.  
Off / On  
Frame Lock-Computer2  
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /  
X95iK.  
Frame Lock - HDMI  
RGB in - RGB1  
Turns the frame lock function off/on of the HDMI port.  
Off / On  
This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w.  
Selects the RGB input signal type of the RGB IN1 port.  
PL95X / X95 / X95K / X95i / X95iK  
Sync On G Off / Auto  
PL90X / X62w / X90 / X90K / X90w  
Sync On G Off / Sync On G On  
This function is not displayed for X64w.  
Selects the computer input signal type of the COMPUTER IN1 port.  
Sync On G Off / Sync On G On  
Computer in-1  
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /  
X95iK.  
© 3M 2012. All Rights Reserved.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RGB in - RGB2  
Selects the RGB input signal type of the RGB IN2 port.  
PL95X / X95 / X95K / X95i / X95iK  
Sync On G Off / Auto  
PL90X / X62w / X90 / X90K / X90w  
Sync On G Off / Sync On G On  
This function is not displayed for X64w.  
Selects the computer input signal type of the COMPUTER IN2 port.  
Sync On G Off / Sync On G On  
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /  
X95iK.  
Computer in-2  
[SETUP] Tab  
Function  
General Description  
Auto Keystone  
Keystone V  
[Execute]: Performs the automatic keystone distortion.  
Corrects the vertical keystone distortion.  
[-]: Decrease the vertical keystone value.  
[+]: Increase the vertical keystone value.  
Keystone H  
Corrects the horizontal keystone distortion.  
[-]: Decrease the horizontal keystone value.  
[+]: Increase the horizontal keystone value.  
This function is not displayed for X62w / X64w.  
Whisper  
Mirror  
Turns off/on the whisper mode.  
Normal / Whisper  
Switches the mode for mirror status.  
Normal / H:Invert / V:Invert / H&V:Invert  
Volume  
Adjusts the volume.  
[-]: Decrease the volume value.  
[+]: Increase the volume value.  
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.  
Speaker  
Turns off/on the built-in speaker.  
Off / On  
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /  
X95iK.  
Audio RGB1  
Audio-Computer1  
Audio RGB2  
Audio-Computer2  
Assigns the audio port when the RGB IN1 input port is selected.  
Off / Audio1 / Audio2 / Audio3  
This function is not displayed for PL90X / PL95X / X64w / X90 / X90K / X90w / X95 / X95K / X95i /  
X95iK.  
Assigns the audio port when the COMPUTER IN1 input port is selected.  
Off / Audio1 / Audio2 / Audio3  
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /  
X95iK.  
Assigns the audio port when the RGB IN2 input port is selected.  
Off / Audio1 / Audio2 / Audio3  
This function is not displayed for PL90X / PL95X / X64w / X90 / X90K / X90w / X95 / X95K / X95i /  
X95iK.  
Assigns the audio port when the COMPUTER IN2 input port is selected.  
Off / Audio1 / Audio2 / Audio3  
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /  
X95iK.  
Audio Video  
Assigns the audio port when the VIDEO input port is selected.  
Off / Audio1 / Audio2 / Audio3  
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.  
Assigns the audio port when the S-VIDEO input port is selected.  
Off / Audio1 / Audio2 / Audio3  
Audio S-Video  
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.  
Assigns the audio port when the COMPONENT input port is selected.  
Off / Audio1 / Audio2 / Audio3  
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.  
Assigns the audio port when the MIU input port is selected.  
Off / Audio1 / Audio2 / Audio3 / Audio MIU  
Audio Component  
Audio MIU  
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.  
Assigns the MONITOR OUT when the RGB IN1 input port is selected.  
Off / RGB1  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
Assigns the MONITOR OUT when the RGB IN2 input port is selected.  
Off / RGB2  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
Assigns the MONITOR OUT when the HDMI input port is selected.  
Off / RGB1 / RGB2  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
Assigns the MONITOR OUT when the COMPONENT input port is selected.  
Off / RGB1 / RGB2  
Monitor Out-RGB1  
Monitor Out-RGB2  
Monitor Out-HDMI  
Monitor Out-Component  
Monitor Out-S-Video  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
Assigns the MONITOR OUT when the S-VIDEO input port is selected.  
Off / RGB1 / RGB2  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
© 3M 2012. All Rights Reserved.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Out-Video  
Monitor Out-MIU  
Monitor Out Standby  
Reset  
Assigns the MONITOR OUT when the VIDEO input port is selected.  
Off / RGB1 / RGB2  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
Assigns the MONITOR OUT when the MIU input port is selected.  
Off / RGB1 / RGB2  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
Assigns the MONITOR OUT in the standby mode.  
Off / RGB1 / RGB2  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
Initialize the selected function.  
X62w / X64w  
Keystone V  
PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK  
Keystone V / Keystone H  
[Execute]: After the confirmation message, the selected function will be initialized.  
[AUDIO] Tab  
This tab is displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.  
Function  
Volume  
General Description  
Adjusts the volume.  
[-]: Decrease the volume value.  
[+]: Increase the volume value.  
Treble  
Bass  
Adjusts the treble level.  
[-]: Decrease the treble value.  
[+]: Increase the treble value.  
Adjusts the bass level.  
[-]: Decrease the bass value.  
[+]: Increase the bass value.  
SRS WOW  
Speaker  
Switches the mode for SRS WOW mode.  
Off / Mid / High  
Turns off/on the built-in speaker.  
Off / On  
Audio - RGB1  
Audio - RGB2  
Audio - M1-D  
Assigns the audio port when the RGB IN1 input port is selected.  
Off / Audio1 / Audio2 / Audio3 / Audio4  
Assigns the audio port when the RGB IN2 input port is selected.  
Off / Audio1 / Audio2 / Audio3 / Audio4  
Assigns the audio port when the M1-D input port is selected.  
Off / Audio1 / Audio2 / Audio3 / Audio4  
This function is not displayed for PL95X / X95 / X95K / X95i / X95iK.  
Assigns the audio port when the HDMI input port is selected.  
Off / Audio1 / Audio2 / Audio3 / Audio4 / Audio HDMI  
This function is not displayed for PL90X / X90 / X90K / X90w.  
Assigns the audio port when the VIDEO input port is selected.  
Off / Audio1 / Audio2 / Audio3 / Audio4  
Assigns the audio port when the S-VIDEO input port is selected.  
Off / Audio1 / Audio2 / Audio3 / Audio4  
Assigns the audio port when the COMPONENT input port is selected.  
Off / Audio1 / Audio2 / Audio3 / Audio4  
Assigns the audio port when the MIU input port is selected.  
Off / Audio1 / Audio2 / Audio3 / Audio4 / Audio MIU  
This function is not displayed for PL90X / X90 / X90K.  
Assigns the audio port in the standby mode.  
Off / Audio1 / Audio2 / Audio3 / Audio4  
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K.  
Switches the mode for the HDMI audio.  
Audio - HDMI  
Audio - Video  
Audio - S-Video  
Audio - Component  
Audio MIU  
Audio Out Standby  
HDMI Audio  
1 / 2  
This function is not displayed for PL90X / X90 / X90K / X90w.  
© 3M 2012. All Rights Reserved.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[SCREEN] Tab  
Function  
General Description  
Language  
Switches the OSD (On Screen Display) language.  
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /  
Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese  
Adjusts the menu position.  
Menu Position  
[
[
[
[
]: Increase the vertical menu position value.  
]: Decrease the vertical menu position value.  
]: Decrease the horizontal menu position value.  
]: Increase the horizontal menu position value.  
Blank  
Switches the mode for the blank screen.  
Blue / White / Black / MyScreen / Original  
Switches the mode for the start-up screen.  
Original / Off / MyScreen  
Start Up  
MyScreen Lock  
Message  
Template  
Turns off/on the MyScreen lock function.  
Off / On  
Turns off/on the message function.  
Off / On  
Switches the mode for the template screen.  
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
Initialize the selected function.  
Reset  
Menu Position V / Menu Position H  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[OPTION] Tab  
Function  
General Description  
Auto Search  
Turns off/on the automatic signal search function.  
Off / On  
Auto Keystone  
Auto On  
Turns off/on the automatic keystone function.  
Off / On  
Turns off/on the auto on function.  
Off / On  
Auto Off  
Adjusts the time to count down to automatically turn the projector off.  
[-]: Decrease the auto power off time.  
[+]: Increase the auto power off time.  
My Button-1  
Assigns the function for the MY BUTTON-1 button on the included remote control.  
X62w  
RGB1 / RGB2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / e-SHOT / Volume+ / Volume-  
X64w  
Computer1 / Computer2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / e-SHOT / Volume+ / Volume- / Live Mode / Thumbnail /  
Slide Show / Directory / Remove Media  
PL90X / X90 / X90K  
RGB1 / RGB2 / M1-D / Video / S-Video / Component / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume-  
X90w  
RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume-  
PL95X / X95 / X95K  
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume- / AV Mute /  
Live Mode / Thumbnail / Slide Show / Directory / Remove Media  
X95i / X95iK  
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / Active Iris / My Image / AV Mute / Template / Live Mode /  
Thumbnail / Slide Show / Directory / Remove Media / Other  
Assigns the function for the MY BUTTON-2 button on the included remote control.  
X62w  
My Button-2  
RGB1 / RGB2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / e-SHOT / Volume+ / Volume-  
X64w  
Computer1 / Computer2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / e-SHOT / Volume+ / Volume- / Live Mode / Thumbnail /  
Slide Show / Directory / Remove Media  
PL90X / X90 / X90K  
RGB1 / RGB2 / M1-D / Video / S-Video / Component / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume-  
X90w  
RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume-  
PL95X / X95 / X95K  
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume- / AV Mute /  
Live Mode / Thumbnail / Slide Show / Directory / Remove Media  
X95i / X95iK  
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /  
My Memory / Picture Mode / Filter Reset / Active Iris / My Image / AV Mute / Template / Live Mode /  
Thumbnail / Slide Show / Directory / Remove Media / Other  
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.  
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
Selects the Closed Caption Display setting.  
My Source  
C.C. - Display  
C.C. - Mode  
C.C. - Channel  
Off / On / Auto  
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K.  
Selects the Closed Caption Mode setting.  
Captions / Text  
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K.  
Selects the Closed Caption Channel setting.  
1 / 2 / 3 / 4  
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K.  
© 3M 2012. All Rights Reserved.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Function  
General Description  
Auto Adjust  
Selects the automatic adjustment mode.  
PL95X / X64w / X95 / X95K / X95i / X95iK  
Disable / Fast / Fine  
PL90X / X62w / X90 / X90K / X90w  
Disable / Enable  
Remote Receiv.  
Turns off/on the remote sensor.  
PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK  
Front (Off / On)  
Rear (Off / On)  
Top (Off / On)  
This function is not displayed for X62w / X64w.  
Changes the projector’s remote sensor off/on of the normal frequency.  
Disable / Enable  
Changes the projector’s remote sensor off/on of the high frequency.  
Disable / Enable  
Remote Freq. - Normal  
Remote Freq. - High  
[OTHER] Tab  
Function  
Power  
General Description  
Turns off/on the power.  
Off / On  
Input Source  
Switches the input source.  
X62w  
RGB1 / RGB2 / Video / S-Video / Component / MIU  
X64w  
Computer1 / Computer2 / Video / S-Video / Component / MIU  
PL90X / X90 / X90K  
RGB1 / RGB2 / M1-D / Video / S-Video / Component  
X90w  
RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU  
PL95X / X95 / X95K / X95i / X95iK  
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU  
Switches the picture mode.  
Picture Mode  
PL90X / X62w / X90 / X90K / X90w  
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / White Board / Custom  
PL95X / X64w / X95 / X95K / X95i / X95iK  
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / White Board / Daytime / Custom  
Custom is displayed only. It cannot be set.  
Turns off/on the blank.  
Blank On / Off  
Mute  
Off / On  
Turns off/on the mute.  
Off / On  
Freeze  
Turns off/on the freeze.  
Normal / Freeze  
Magnify  
Adjusts the magnify setting  
[-]: Decrease the magnify value.  
[+]: Increase the magnify value.  
e-SHOT  
Displays the e-SHOT data.  
Off / Image1 / Image2 / Image3 / Image4  
This function is not displayed for X95i / X95iK.  
Displays the My Image data.  
My Image  
Off / Image1 / Image2 / Image3 / Image4  
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.  
© 3M 2012. All Rights Reserved.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
X30N / X35N / X35NK  
[STATUS] Tab  
Function  
Power  
General Description  
Displays the current power status.  
On / Standby / Cool down  
Input Source  
Error Status  
Displays the current input source.  
Computer in1 / Computer in2 / Component / S-Video / Video  
Displays the current error status.  
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error /  
Filter Error / Other Error  
Blank On/Off  
Mute  
Displays the current blank on/off status.  
On / Off  
Displays the current mute status.  
On / Off  
Freeze  
Displays the current freeze status.  
Normal / Freeze  
Lamp Time  
Filter Time  
Reset  
Displays the usage time for the current lamp.  
Displays the usage time for the current filter.  
Initialize the selected function.  
Lamp Time / Filter Time  
[Execute]: After the confirmation message, the selected function will be initialized.  
[PICTURE] Tab  
Function  
General Description  
Brightness  
Adjusts the brightness.  
[-]: Decrease the brightness value.  
[+]: Increase the brightness value.  
Contrast  
Gamma  
Color Temp  
Color  
Adjusts the contrast.  
[-]: Decrease the contrast value.  
[+]: Increase the contrast value.  
Switches the gamma mode.  
#1 Custom / #2 Custom / #3 Custom / #4 Custom / #5 Custom / #6 Custom / #1 Default /  
#2 Default / #3 Default / #4 Default / #5 Default / #6 Default /  
Switches the color temperature mode.  
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / #1 Custom / #2 Custom / #3 Custom /  
#4 Custom / #5 Custom / #6 Custom  
Adjusts the strength of whole color.  
[-]: Decrease the color value.  
[+]: Increase the color value  
Tint  
Adjusts the tint.  
[-]: Decrease the tint value.  
[+]: Increase the tint value.  
Sharpness  
Adjusts the sharpness.  
[-]: Decrease the sharpness value.  
[+]: Increase the sharpness value.  
Active Iris  
Changes the active iris control mode.  
Presentation / Theater / Off  
My Memory  
Loads the data from the memory.  
Load1 / Load2 / Load3 / Load4  
Saves the current adjustment data into the memory.  
Save1 / Save2 / Save3 / Save4  
[Execute]: Performs each function.  
Reset  
Initialize the selected function  
Brightness / Contrast / Color / Tint / Sharpness  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gamma - Custom -  
Function  
General Description  
User Gamma Pattern  
Changes the test pattern.  
Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp  
User Gamma Point 1  
User Gamma Point 2  
User Gamma Point 3  
User Gamma Point 4  
User Gamma Point 5  
User Gamma Point 6  
User Gamma Point 7  
User Gamma Point 8  
Adjusts the user gamma point 1.  
[-]: Decrease the user gamma point 1 value.  
[+]: Increase the user gamma point 1 value.  
[Reset]: Initialize the user gamma point 1 value.  
Adjusts the user gamma point 2.  
[-]: Decrease the user gamma point 2 value.  
[+]: Increase the user gamma point 2 value.  
[Reset]: Initialize the user gamma point 2 value.  
Adjusts the user gamma point 3.  
[-]: Decrease the user gamma point 3 value.  
[+]: Increase the user gamma point 3 value.  
[Reset]: Initialize the user gamma point 3 value.  
Adjusts the user gamma point 4.  
[-]: Decrease the user gamma point 4 value.  
[+]: Increase the user gamma point 4 value.  
[Reset]: Initialize the user gamma point 4 value.  
Adjusts the user gamma point 5.  
[-]: Decrease the user gamma point 5 value.  
[+]: Increase the user gamma point 5 value.  
[Reset]: Initialize the user gamma point 5 value.  
Adjusts the user gamma point 6.  
[-]: Decrease the user gamma point 6 value.  
[+]: Increase the user gamma point 6 value.  
[Reset]: Initialize the user gamma point 6 value.  
Adjusts the user gamma point 7.  
[-]: Decrease the user gamma point 7 value.  
[+]: Increase the user gamma point 7 value.  
[Reset]: Initialize the user gamma point 7 value.  
Adjusts the user gamma point 8.  
[-]: Decrease the user gamma point 8 value.  
[+]: Increase the user gamma point 8 value.  
[Reset]: Initialize the user gamma point 8 value.  
Color Temp - Custom -  
Function  
General Description  
User Gamma Pattern  
Changes the test pattern.  
Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp  
Color Temp Gain R  
Color Temp Gain G  
Color Temp Gain B  
Color Temp Offset R  
Color Temp Offset G  
Color Temp Offset B  
Adjusts the red color temperature gain.  
[-]: Decrease the red color temperature gain value.  
[+]: Increase the red color temperature gain value.  
[Reset]: Initialize the red color temperature gain value.  
Adjusts the green color temperature gain.  
[-]: Decrease the green color temperature gain value.  
[+]: Increase the green color temperature gain value.  
[Reset]: Initialize the green color temperature gain value.  
Adjusts the blue color temperature gain.  
[-]: Decrease the blue color temperature gain value.  
[+]: Increase the blue color temperature gain value.  
[Reset]: Initialize the blue color temperature gain value.  
Adjusts the red color temperature offset.  
[-]: Decrease the red color temperature offset value.  
[+]: Increase the red color temperature offset value.  
[Reset]: Initialize the red color temperature offset value.  
Adjusts the green color temperature offset.  
[-]: Decrease the green color temperature offset value.  
[+]: Increase the green color temperature offset value.  
[Reset]: Initialize the green color temperature offset value.  
Adjusts the blue color temperature offset.  
[-]: Decrease the blue color temperature offset value.  
[+]: Increase the blue color temperature offset value.  
[Reset]: Initialize the blue color temperature offset value.  
© 3M 2012. All Rights Reserved.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[IMAGE] Tab  
Function  
Aspect  
General Description  
Switches the mode for aspect ratio.  
Normal / 4:3 / 16:9 / 16:10 / 14:9  
Adjusts the over-scan ratio.  
[-]: Decrease the over scan value.  
[+]: Increase the over scan value.  
Adjusts the display position.  
Over Scan  
Position  
[
[
[
[
]: Increase the vertical position value.  
]: Decrease the vertical position value.  
]: Increase the horizontal position value.  
]: Decrease the horizontal position value.  
H Phase  
H Size  
Adjusts the horizontal phase to eliminate flicker.  
[-]: Decrease the horizontal phase value.  
[+]: Increase the horizontal phase value.  
Adjusts the horizontal size.  
[-]: Decrease the horizontal size value.  
[+]: Increase the horizontal size value.  
Auto Adjust  
Reset  
[Execute]: Performs the automatic adjustment feature.  
Initialize the selected function.  
Over Scan / V Position / H Position / H Size  
[Execute]: After the confirmation message, the selected function will be initialized.  
[INPUT] Tab  
Function  
General Description  
Progressive  
Switches the progress mode.  
TV / FILM / Off  
Video NR  
Switches the noise reduction mode.  
High / Mid / Low  
Color Space  
Switches the mode for color space.  
Auto / RGB / SMPTE240 / REC709 / REC601  
Switches the function of the COMPONENT port.  
Component / Scart RGB  
Component  
S-Video Format  
C-Video Format  
Frame Lock - Computer in1  
Frame Lock - Computer in2  
Computer in1  
Switches the mode for video format of the S-VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Switches the mode for video format of the VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Selects the frame lock function on/off of the COMPUTER IN1 port.  
On / Off  
Selects the frame lock function on/off of the COMPUTER IN2 port.  
On / Off  
Selects the computer input signal type of the COMPUTER IN1 port.  
Auto / Sync On G Off  
Computer in2  
Selects the computer input signal type of the COMPUTER IN2 port.  
Auto / Sync On G Off  
[SETUP] Tab  
Function  
General Description  
Auto Keystone  
Keystone V  
[Execute]: Performs the automatic keystone distortion correction.  
Corrects the vertical keystone distortion.  
[-]: Decrease the vertical keystone value.  
[+]: Increase the vertical keystone value.  
Turns off/on the eco mode.  
Eco Mode  
Normal / Eco  
Mirror  
Switches the mode for mirror status.  
Normal / H:Invert / V:Invert / H&V:Invert  
Standby Mode  
Switches the standby mode setting.  
Normal / Saving  
Monitor Out - Computer in1  
Monitor Out - Computer in2  
Monitor Out - Component  
Monitor Out - S-Video  
Monitor Out - Video  
Monitor Out - Standby  
Reset  
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.  
Computer in1 / Off  
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.  
Computer in2 / Off  
Assigns the MONITOR OUT when the COMPONENT input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the S-VIDEO input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the VIDEO input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT in the standby mode.  
Computer in1 / Computer in2 / Off  
Initialize the selected function.  
Keystone V  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[AUDIO] Tab  
Function  
Volume  
General Description  
Adjusts the volume.  
[-]: Decrease the volume value.  
[+]: Increase the volume value.  
Turns on/off the built-in speaker.  
On / Off  
Speaker  
Audio Source - Computer in1 Assigns the audio port when the COMPUTER IN1 input port is selected.  
Off / Audio1 / Audio2 / Audio3  
Audio Source - Computer in2 Assigns the audio port when the COMPUTER IN2 input port is selected.  
Off / Audio1 / Audio2 / Audio3  
Audio Source - Component  
Audio Source - S-Video  
Audio Source - Video  
Audio Out Standby  
Assigns the audio port when the COMPONENT input port is selected.  
Off / Audio1 / Audio2 / Audio3  
Assigns the audio port when the S-VIDEO input port is selected.  
Off / Audio1 / Audio2 / Audio3  
Assigns the audio port when the VIDEO input port is selected.  
Off / Audio1 / Audio2 / Audio3  
Assigns the audio port in the standby mode.  
Off / Audio1 / Audio2 / Audio3  
[SCREEN] Tab  
Function  
General Description  
Language  
Switches the OSD (On Screen Display) language.  
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /  
Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese  
Adjusts the menu position.  
Menu Position  
[
[
[
[
]: Increase the vertical menu position value.  
]: Decrease the vertical menu position value.  
]: Decrease the horizontal menu position value.  
]: Increase the horizontal menu position value.  
Blank  
Switches the mode for the blank screen.  
MyScreen / Original / Blue / White / Black  
Switches the mode for the start-up screen.  
MyScreen / Original / Off  
Start Up  
MyScreen Lock  
Message  
Turns on/off the MyScreen lock function.  
On / Off  
Turns on/off the message function.  
On / Off  
Template  
Switches the mode for the template screen.  
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4  
Selects the Closed Caption Display setting.  
Auto / On / Off  
Selects the Closed Caption Mode setting.  
Captions / Text  
Selects the Closed Caption Channel setting.  
1 / 2 / 3 / 4  
Initialize the selected function.  
C.C. - Display  
C.C. – Mode  
C.C. - Channel  
Reset  
Menu Position V / Menu Position H  
[Execute]: After the confirmation message, the selected function will be initialized.  
[OPTION] Tab  
Function  
General Description  
Auto Search  
Turns on/off the automatic signal search function.  
On / Off  
Auto Keystone  
Direct On  
Turns on/off the automatic keystone function.  
On / Off  
Turns on/off the direct on function.  
On / Off  
Auto Off  
Adjusts the time to count down to automatically turn the projector off.  
[-]: Decrease the auto power off time.  
[+]: Increase the auto power off time.  
My Button-1  
My Button-2  
My Source  
Assigns the function for the MY BUTTON-1 button on the included remote control.  
Computer in1 / Computer in2 / Component / S-Video / Video / Information / Auto Keystone Execute /  
My Memory / Active Iris / Picture Mode / Filter Reset / Template / AV Mute / My Image / Messenger /  
Other  
Assigns the function for the MY BUTTON-2 button on the included remote control.  
Computer in1 / Computer in2 / Component / S-Video / Video / Information / Auto Keystone Execute /  
My Memory / Active Iris / Picture Mode / Filter Reset / Template / AV Mute / My Image / Messenger /  
Other  
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.  
Computer in1 / Computer in2 / Component / S-Video / Video  
© 3M 2012. All Rights Reserved.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Function  
General Description  
Remote Frequency - Normal  
Changes the projector’s remote sensor off/on of the normal frequency.  
Disable / Enable  
Remote Frequency - High  
Changes the projector’s remote sensor off/on of the high frequency.  
Disable / Enable  
[OTHER] Tab  
Function  
Power  
General Description  
Turns on/off the power.  
On / Off  
Input Source  
Picture Mode  
Switches the input source.  
Computer in1 / Computer in2 / Component / S-Video / Video  
Switches the picture mode.  
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom  
Custom is displayed only. It cannot be set.  
Turns on/off the blank.  
Blank On/Off  
Mute  
On / Off  
Turns on/off the mute.  
On / Off  
Freeze  
Turns off/on the freeze.  
Normal / Freeze  
Template On/Off  
Magnify  
Turns on/off the template screen.  
On / Off  
Adjusts the magnify setting.  
[-]: Decrease the magnify value.  
[+]: Increase the magnify value.  
Displays the My Image data.  
Off / Image-1 / Image-2 / Image-3 / Image-4  
Deletes the My Image data.  
Image-1 / Image-2 / Image-3 / Image-4  
My Image  
My Image Delete  
© 3M 2012. All Rights Reserved.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CL67N / CL69N / PL92X / WX36 / X31 / X36 / X46  
[STATUS] Tab  
Function  
Power  
General Description  
Displays the current power status.  
On / Standby / Cool down  
Input Source  
Error Status  
Displays the current input source.  
Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video /  
Video  
Displays the current error status.  
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error /  
Other Error  
Blank On/Off  
Mute  
Displays the current blank on/off status.  
On / Off  
Displays the current mute status.  
On / Off  
Freeze  
Displays the current freeze status.  
Normal / Freeze  
Lamp Time  
Filter Time  
Reset  
Displays the usage time for the current lamp.  
Displays the usage time for the current filter.  
Initialize the selected function.  
Lamp Time / Filter Time  
[Execute]: After the confirmation message, the selected function will be initialized.  
[PICTURE] Tab  
Function  
General Description  
Brightness  
Adjusts the brightness.  
[-]: Decrease the brightness value.  
[+]: Increase the brightness value.  
Contrast  
Gamma  
Color Temp  
Color  
Adjusts the contrast.  
[-]: Decrease the contrast value.  
[+]: Increase the contrast value.  
Switches the gamma mode.  
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 /  
Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 /  
Switches the color temperature mode.  
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 /  
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6  
Adjusts the strength of whole color.  
[-]: Decrease the color value.  
[+]: Increase the color value  
Tint  
Adjusts the tint.  
[-]: Decrease the tint value.  
[+]: Increase the tint value.  
Sharpness  
Adjusts the sharpness.  
[-]: Decrease the sharpness value.  
[+]: Increase the sharpness value.  
Active Iris  
Changes the active Iris control mode.  
Presentation / Theater / Off  
My Memory  
Loads the data from the memory.  
Load-1 / Load-2 / Load-3 / Load-4  
Saves the current adjustment data into the memory.  
Save-1 / Save-2 / Save-3 / Save-4  
[Execute]: Performs each function.  
Initialize the selected function  
Reset  
Brightness / Contrast / Color / Tint / Sharpness  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gamma - Custom -  
Function  
General Description  
Test Pattern  
Changes the test pattern.  
Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp  
Gamma Point 1  
Gamma Point 2  
Gamma Point 3  
Gamma Point 4  
Gamma Point 5  
Gamma Point 6  
Gamma Point 7  
Gamma Point 8  
Adjusts the user gamma point 1.  
[-]: Decrease the user gamma point 1 value.  
[+]: Increase the user gamma point 1 value.  
[Reset]: Initialize the user gamma point 1 value.  
Adjusts the user gamma point 2.  
[-]: Decrease the user gamma point 2 value.  
[+]: Increase the user gamma point 2 value.  
[Reset]: Initialize the user gamma point 2 value.  
Adjusts the user gamma point 3.  
[-]: Decrease the user gamma point 3 value.  
[+]: Increase the user gamma point 3 value.  
[Reset]: Initialize the user gamma point 3 value.  
Adjusts the user gamma point 4.  
[-]: Decrease the user gamma point 4 value.  
[+]: Increase the user gamma point 4 value.  
[Reset]: Initialize the user gamma point 4 value.  
Adjusts the user gamma point 5.  
[-]: Decrease the user gamma point 5 value.  
[+]: Increase the user gamma point 5 value.  
[Reset]: Initialize the user gamma point 5 value.  
Adjusts the user gamma point 6.  
[-]: Decrease the user gamma point 6 value.  
[+]: Increase the user gamma point 6 value.  
[Reset]: Initialize the user gamma point 6 value.  
Adjusts the user gamma point 7.  
[-]: Decrease the user gamma point 7 value.  
[+]: Increase the user gamma point 7 value.  
[Reset]: Initialize the user gamma point 7 value.  
Adjusts the user gamma point 8.  
[-]: Decrease the user gamma point 8 value.  
[+]: Increase the user gamma point 8 value.  
[Reset]: Initialize the user gamma point 8 value.  
Color Temp - Custom -  
Function  
General Description  
Test Pattern  
Changes the test pattern.  
Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp  
Color Temp Gain R  
Color Temp Gain G  
Color Temp Gain B  
Color Temp Offset R  
Color Temp Offset G  
Color Temp Offset B  
Adjusts the red color temperature gain.  
[-]: Decrease the red color temperature gain value.  
[+]: Increase the red color temperature gain value.  
[Reset]: Initialize the red color temperature gain value.  
Adjusts the green color temperature gain.  
[-]: Decrease the green color temperature gain value.  
[+]: Increase the green color temperature gain value.  
[Reset]: Initialize the green color temperature gain value.  
Adjusts the blue color temperature gain.  
[-]: Decrease the blue color temperature gain value.  
[+]: Increase the blue color temperature gain value.  
[Reset]: Initialize the blue color temperature gain value.  
Adjusts the red color temperature offset.  
[-]: Decrease the red color temperature offset value.  
[+]: Increase the red color temperature offset value.  
[Reset]: Initialize the red color temperature offset value.  
Adjusts the green color temperature offset.  
[-]: Decrease the green color temperature offset value.  
[+]: Increase the green color temperature offset value.  
[Reset]: Initialize the green color temperature offset value.  
Adjusts the blue color temperature offset.  
[-]: Decrease the blue color temperature offset value.  
[+]: Increase the blue color temperature offset value.  
[Reset]: Initialize the blue color temperature offset value.  
© 3M 2012. All Rights Reserved.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[IMAGE] Tab  
Function  
Aspect  
General Description  
Switches the mode for aspect ratio.  
CL67N / CL69N / PL92X / X31 / X36 / X46  
Normal / 4:3 / 16:9 / 16:10 / 14:9  
WX36  
Normal / 4:3 / 16:9 / 16:10 / 14:9 / Native  
Over Scan  
Position  
Adjusts the over-scan ratio  
[-]: Decrease the over-scan value.  
[+]: Increase the over-scan value.  
Adjusts the display position.  
[
[
[
[
]: Increase the vertical position value.  
]: Decrease the vertical position value.  
]: Increase the horizontal position value.  
]: Decrease the horizontal position value.  
H Phase  
H Size  
Adjusts the horizontal phase to eliminate flicker.  
[-]: Decrease the horizontal phase value.  
[+]: Increase the horizontal phase value.  
Adjusts the horizontal size.  
[-]: Decrease the horizontal size value.  
[+]: Increase the horizontal size value.  
Auto Adjust  
Reset  
[Execute]: Performs the automatic adjustment feature.  
Initialize the selected function.  
Over Scan / V Position / H Position / H Size  
[Execute]: After the confirmation message, the selected function will be initialized.  
[INPUT] Tab  
Function  
General Description  
Progressive  
Switches the progress mode.  
TV / FILM / Off  
Video NR  
Switches the noise reduction mode.  
High / Mid / Low  
Color Space  
Switches the mode for color space.  
Auto / RGB / SMPTE240 / REC709 / REC601  
Switches the function of the COMPONENT port.  
Component / Scart RGB  
Component  
S-Video Format  
C-Video Format  
HDMI Format  
Switches the mode for video format of the S-VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Switches the mode for video format of the VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Switches the video format for an input from the HDMI port.  
Auto / Video / Computer  
HDMI Range  
Changes the digital range for input from the HDMI port.  
Auto / Normal / Enhanced  
Computer in1  
Selects the computer input signal type of the COMPUTER IN1 port.  
Auto / Sync On G Off  
Computer in2  
Selects the computer input signal type of the COMPUTER IN2 port.  
Auto / Sync On G Off  
Frame Lock - Computer in1  
Frame Lock - Computer in2  
Frame Lock - HDMI  
Selects the frame lock function on/off of the COMPUTER IN1 port.  
On / Off  
Selects the frame lock function on/off of the COMPUTER IN2 port.  
On / Off  
Selects the frame lock function on/off of the HDMI port.  
On / Off  
© 3M 2012. All Rights Reserved.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[SETUP] Tab  
Function  
General Description  
Auto Keystone  
Keystone V  
[Execute]: Performs the automatic keystone distortion correction.  
Adjusts the vertical keystone distortion  
[-]: Decrease the vertical keystone value.  
[+]: Increase the vertical keystone value.  
Turns on/off the auto eco mode.  
Auto Eco Mode  
On / Off  
Eco Mode  
Turns off/on the eco mode.  
Normal / Eco  
Mirror  
Switches the mode for mirror status.  
Normal / H:Invert / V:Invert / H&V:Invert  
Standby Mode  
Switches the standby mode setting.  
Normal / Saving  
Monitor Out - Computer in1  
Monitor Out - Computer in2  
Monitor Out - LAN  
Monitor Out - USB TYPE A  
Monitor Out - USB TYPE B  
Monitor Out - HDMI  
Monitor Out - Component  
Monitor Out - S-Video  
Monitor Out - Video  
Monitor Out - Standby  
Reset  
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.  
Computer in1 / Off  
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.  
Computer in2 / Off  
Assigns the MONITOR OUT when the LAN input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the USB TYPE A input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the USB TYPE B input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the HDMI input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the COMPONENT input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the S-VIDEO input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the VIDEO input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT in the standby mode.  
Computer in1 / Computer in2 / Off  
Initialize the selected function.  
Keystone V  
[Execute]: After the confirmation message, the selected function will be initialized.  
[AUDIO] Tab  
Function  
Volume  
General Description  
Adjusts the volume.  
[-]: Decrease the volume value.  
[+]: Increase the volume value.  
Speaker  
Turns on/off the built-in speaker.  
On / Off  
Mic Level  
Mic Volume  
Switches the input level to match that of the microphone connected to the MIC port.  
High / Low  
Adjusts the volume of the microphone connected to the MIC port.  
[-]: Decrease the volume of the microphone.  
[+]: Increase the volume of the mocrophone.  
Audio Source - Computer in1 Assigns the audio port when the COMPUTER IN1 input port is selected.  
Off / Audio in1 / Audio in2 / Audio in3  
Audio Source - Computer in2 Assigns the audio port when the COMPUTER IN2 input port is selected.  
Off / Audio in1 / Audio in2 / Audio in3  
Audio Source - LAN  
Assigns the audio port when the LAN input port is selected.  
Off / Audio in1 / Audio in2 / Audio in3  
Audio Source - USB TYPE A Assigns the audio port when the USB TYPE A input port is selected.  
Off / Audio in1 / Audio in2 / Audio in3  
Audio Source - USB TYPE B Assigns the audio port when the USB TYPE B input port is selected.  
Off / Audio in1 / Audio in2 / Audio in3  
Audio Source - HDMI  
Audio Source - Component  
Audio Source - S-Video  
Audio Source - Video  
Audio Source - Standby  
HDMI Audio  
Assigns the audio port when the HDMI input port is selected.  
Off / Audio in1 / Audio in2 / Audio in3 / Audio HDMI  
Assigns the audio port when the COMPONENT input port is selected.  
Off / Audio in1 / Audio in2 / Audio in3  
Assigns the audio port when the S-VIDEO input port is selected.  
Off / Audio in1 / Audio in2 / Audio in3  
Assigns the audio port when the VIDEO input port is selected.  
Off / Audio in1 / Audio in2 / Audio in3  
Assigns the audio port in the standby mode.  
Off / Audio in1 / Audio in2 / Audio in3  
Switches the mode for the HDMI audio.  
1 / 2  
© 3M 2012. All Rights Reserved.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[SCREEN] Tab  
Function  
General Description  
Language  
Switches the OSD (On Screen Display) language.  
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /  
Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese  
Adjusts the menu position.  
Menu Position  
[
[
[
[
]: Increase the vertical menu position value.  
]: Decrease the vertical menu position value.  
]: Decrease the horizontal menu position value.  
]: Increase the horizontal menu position value.  
Blank  
Switches the mode for the blank screen.  
MyScreen / Original / Blue / White / Black  
Switches the mode for thr start-up screen.  
MyScreen / Original / Off  
Start Up  
MyScreen Lock  
Message  
Turns on/off the MyScreen lock function.  
On / Off  
Turns on/off the message function.  
On / Off  
Template  
Switches the mode for the template screen.  
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2  
Selects the Closed Caption Display setting.  
Auto / On / Off  
Selects the Closed Caption Mode setting.  
Captions / Text  
Selects the Closed Caption Channel setting.  
1 / 2 / 3 / 4  
Initialize the selected function.  
C.C. – Display  
C.C. – Mode  
C.C. – Channel  
Reset  
Menu Position V / Menu Position H  
[Execute]: After the confirmation message, the selected function will be initialized.  
[OPTION] Tab  
Function  
General Description  
Auto Search  
Turns on/off the automatic signal search function.  
On / Off  
Auto Keystone  
Direct Power On  
Auto Power Off  
Turns on/off the automatic keystone function.  
On / Off  
Turns on/off direct power on function.  
On / Off  
Adjusts the time to count down to automatically turn the projector off.  
[-]: Decrease the auto power off time.  
[+]: Increase the auto power off time.  
USB TYPE B  
My Button-1  
Selects the function of USB TYPE B port.  
Mouse / USB Display  
Assigns the function for the MY BUTTON-1 button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video /  
Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /  
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other  
Assigns the function for the MY BUTTON-2 button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video /  
Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /  
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other  
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control..  
Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video /  
Video  
My Button-2  
My Source  
Service  
Function  
General Description  
Remote Freq. - Normal  
Changes the projector’s remote sensor off/on of the normal frequency.  
Disable / Enable  
Remote Freq. - High  
Changes the projector’s remote sensor off/on of the high frequency.  
Disable / Enable  
© 3M 2012. All Rights Reserved.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[OTHER] Tab  
Function  
Power  
General Description  
Turns on/off the power.  
Off / On  
Input Source  
Picture Mode  
Switches the input source.  
Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video /  
Video  
Switches the picture mode.  
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom  
Custom is displayed only. It cannot be set.  
Turns on/off the blank.  
Off / On  
Turns on/off the mute.  
Off / On  
Blank On/Off  
Mute  
Freeze  
Turns on/off the freeze.  
On / Off  
Magnify  
Adjusts the magnify setting.  
[-]: Decrease the magnify value.  
[+]: Increase the magnify value.  
Adjusts the magnify position.  
Magnify Position  
[
[
[
[
]: Decrease the vertical magnify position value.  
]: Increase the vertical magnify position value.  
]: Decrease the horizontal magnify position value.  
]: Increase the horizontal magnify position value.  
Template On/Off  
My Image  
Turns on/off the template screen.  
On / Off  
Displays the My Image data.  
Image-Off / Image-1 / Image-2 / Image-3 / Image-4  
My Image Delete  
Messenger  
Deletes the My Image data.  
Image-1 / Image-2 / Image-3 / Image-4  
Displays the Messenger.  
Message-Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 /  
Message-6 / Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12  
© 3M 2012. All Rights Reserved.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CL86X / PL96X / X56  
[STATUS] Tab  
Function  
Power  
General Description  
Displays the current power status.  
On / Standby / Cool down  
Input Source  
Error Status  
Displays the current Input source.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /  
Video  
Displays the current error status.  
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error /  
Other Error  
Blank On/Off  
Mute  
Displays the current blank on/off status.  
On / Off  
Displays the current mute status.  
On / Off  
Freeze  
Displays the current freeze status.  
Normal / Freeze  
Lamp Time  
Filter Time  
Stack Mode  
Displays the usage time for the current lamp.  
Displays the usage time for the current filter.  
Displays the stack mode status.  
Main / Sub  
This item is not displayed when stack mode status is off.  
Initialize the selected function.  
Lamp Time / Filter Time  
Reset  
[Execute]: After the confirmation message, the selected function will be initialized.  
[PICTURE] Tab  
Function  
General Description  
Brightness  
Adjusts the brightness.  
[-]: Decrease the brightness value.  
[+]: Increase the brightness value.  
Contrast  
Gamma  
Color Temp  
Color  
Adjusts the contrast.  
[-]: Decrease the contrast value.  
[+]: Increase the contrast value.  
Switches the gamma mode.  
Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 /  
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6  
Switches the color temperature mode.  
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 /  
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6  
Adjusts the strength of whole color.  
[-]: Decrease the color value.  
[+]: Increase the color value  
Tint  
Adjusts the tint.  
[-]: Decrease the tint value.  
[+]: Increase the tint value.  
Sharpness  
Adjusts the sharpness.  
[-]: Decrease the sharpness value.  
[+]: Increase the sharpness value.  
Active Iris  
Changes the active iris control mode.  
Presentation / Theater / Off  
My Memory  
Saves the current adjustment data into the memory.  
Save-1 / Save-2 / Save-3 / Save-4  
Loads the data from the memory.  
Load-1 / Load-2 / Load-3 / Load-4  
[Execute]: Performs each function.  
Reset  
Initialize the selected function.  
Brightness / Contrast / Color / Tint / Sharpness  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gamma - Custom -  
Function  
General Description  
Test Pattern  
Changes the test pattern.  
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp  
Gamma Point 1  
Gamma Point 2  
Gamma Point 3  
Gamma Point 4  
Gamma Point 5  
Gamma Point 6  
Gamma Point 7  
Gamma Point 8  
Adjusts the user gamma point 1.  
[-]: Decrease the user gamma point 1 value.  
[+]: Increase the user gamma point 1 value.  
[Reset]: Initialize the user gamma point 1 value.  
Adjusts the user gamma point 2.  
[-]: Decrease the user gamma point 2 value.  
[+]: Increase the user gamma point 2 value.  
[Reset]: Initialize the user gamma point 2 value.  
Adjusts the user gamma point 3.  
[-]: Decrease the user gamma point 3 value.  
[+]: Increase the user gamma point 3 value.  
[Reset]: Initialize the user gamma point 3 value.  
Adjusts the user gamma point 4.  
[-]: Decrease the user gamma point 4 value.  
[+]: Increase the user gamma point 4 value.  
[Reset]: Initialize the user gamma point 4 value.  
Setting the user gamma point 5.  
[-]: Decrease the user gamma point 5 value.  
[+]: Increase the user gamma point 5 value.  
[Reset]: Initialize the user gamma point 5 value.  
Setting the user gamma point 6.  
[-]: Decrease the user gamma point 6 value.  
[+]: Increase the user gamma point 6 value.  
[Reset]: Initialize the user gamma point 6 value.  
Setting the user gamma point 7.  
[-]: Decrease the user gamma point 7 value.  
[+]: Increase the user gamma point 7 value.  
[Reset]: Initialize the user gamma point 7 value.  
Setting the user gamma point 8.  
[-]: Decrease the user gamma point 8 value.  
[+]: Increase the user gamma point 8 value.  
[Reset]: Initialize the user gamma point 8 value.  
Color Temp - Custom -  
Function  
General Description  
Test Pattern  
Changes the test pattern.  
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp  
Color Temp Gain R  
Color Temp Gain G  
Color Temp Gain B  
Color Temp Offset R  
Color Temp Offset G  
Color Temp Offset B  
Adjusts the red color temperature gain.  
[-]: Decrease the red color temp gain value.  
[+]: Increase the red color temp gain value.  
[Reset]: Initialize the red color temp gain value.  
Adjusts the green color temperature gain.  
[-]: Decrease the green color temp gain value.  
[+]: Increase the green color temp gain value.  
[Reset]: Initialize the green color temp gain value.  
Adjusts the blue color temperature gain.  
[-]: Decrease the blue color temp gain value.  
[+]: Increase the blue color temp gain value.  
[Reset]: Initialize the blue color temp gain value.  
Adjusts the red color temperature offset.  
[-]: Decrease the red color temp offset value.  
[+]: Increase the red color temp offset value.  
[Reset]: Initialize the red color temp offset value.  
Adjusts the green color temperature offset.  
[-]: Decrease the green color temp offset value.  
[+]: Increase the green color temp offset value.  
[Reset]: Initialize the green color temp offset value.  
Adjusts the blue color temperature offset.  
[-]: Decrease the blue color temp offset value.  
[+]: Increase the blue color temp offset value.  
[Reset]: Initialize the blue color temp offset value.  
© 3M 2012. All Rights Reserved.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[IMAGE] Tab  
Function  
Aspect  
General Description  
Switches the mode for aspect ratio.  
Normal / 4:3 / 16:9 / 16:10 / 14:9  
Adjusts the over-scan ratio.  
[-]: Decrease the over scan value.  
[+]: Increase the over scan value.  
Adjusts the display position.  
Over Scan  
Position  
[
[
[
[
]: Increase the vertical position value.  
]: Decrease the vertical position value.  
]: Increase the horizontal position value.  
]: Decrease the horizontal position value.  
H Phase  
H Size  
Adjusts the horizontal phase to eliminate flicker.  
[-]: Decrease the horizontal phase value.  
[+]: Increase the horizontal phase value.  
Adjusts the horizontal size.  
[-]: Decrease the horizontal size value.  
[+]: Increase the horizontal size value.  
Auto Adjust  
Reset  
[Execute]: Performs the automatic adjustment feature.  
Initialize the selected function.  
Over Scan / V Position / H Position / H Size  
[Execute]: After the confirmation message, the selected function will be initialized.  
[INPUT] Tab  
Function  
General Description  
Progressive  
Switches the progress mode.  
TV / Film / Off  
Video NR  
Switches the noise reduction mode.  
High / Mid / Low  
Color Space  
Switches the mode for color space.  
Auto / RGB / SMPTE240 / REC709 / REC601  
Switches the function of the COMPONENT port.  
Component / Scart RGB  
Component  
Video Format - S-Video  
Video Format - Video  
HDMI Format  
Switches the mode for video format of the S-VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Switches the mode for video format of the VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Switches the video format for an input from the HDMI port.  
Auto / Video / Computer  
HDMI Range  
Changes the digital range for an input from the HDMI port.  
Auto / Normal / Enhanced  
Computer in - Computer in1  
Computer in - Computer in2  
Frame Lock - Computer in1  
Frame Lock - Computer in2  
Frame Lock - HDMI  
Selects the computer input signal type of the COMPUTER IN1 port.  
Auto / Sync On G Off  
Selects the computer input signal type of the COMPUTER IN2 port.  
Auto / Sync On G Off  
Selects the frame lock function on/off of the COMPUTER IN1 port.  
On / Off  
Selects the frame lock function on/off of the COMPUTER IN2 port.  
On / Off  
Selects the frame lock function on/off of the HDMI port.  
On / Off  
© 3M 2012. All Rights Reserved.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[SETUP] Tab  
Function  
General Description  
Auto Keystone  
Keystone V  
[Execute]: Performs the automatic keystone distortion correction.  
Corrects the vertical keystone distortion.  
[-]: Decrease the vertical keystone value.  
[+]: Increase the vertical keystone value.  
Corrects the horizontal keystone distortion.  
[-]: Decrease the horizontal keystone value.  
[+]: Increase the horizontal keystone value.  
[Settings...]: Displays the Perfect Fit dialog.  
Turns on/off the auto eco mode.  
Keystone H  
Perfect Fit  
Auto Eco Mode  
On / Off  
Eco Mode  
Turns off/on the eco mode.  
Normal / Eco  
Mirror  
Switches the mode for mirror status.  
Normal / H:Invert / V:Invert / H&V:Invert  
Standby Mode  
Switches the standby mode setting.  
Normal / Saving  
Monitor Out - Computer in1  
Monitor Out - Computer in2  
Monitor Out - LAN  
Monitor Out - USB type A  
Monitor Out - USB type B  
Monitor Out - HDMI  
Monitor Out - Component  
Monitor Out - S-Video  
Monitor Out - Video  
Monitor Out - Standby  
Reset  
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.  
Computer in1 / Off  
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.  
Computer in2 / Off  
Assigns the MONITOR OUT when the LAN input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the USB TYPE A input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the USB TYPE B input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the HDMI input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the COMPONENT input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the S-VIDEO input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the VIDEO input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT in the standby mode.  
Computer in1 / Computer in2 / Off  
Initialize the selected function.  
Keystone V / Keystone H  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Perfect Fit  
Function  
General Description  
Perfect Fit  
Selects the perfect fit enable setting.  
Enable / Disable  
Corner Position  
Left Top V  
Adjusts the shape of the projected image in left top corner.  
[-]: Decrease the vertical value.  
[+]: Increase the vertical value.  
Left Top H  
Adjusts the shape of the projected image in left top corner.  
[-]: Decrease the horizontal value.  
[+]: Increase the horizontal value.  
Left Bottom V  
Left Bottom H  
Right Top V  
Adjusts the shape of the projected image in left bottom corner.  
[-]: Decrease the vertical value.  
[+]: Increase the vertical value.  
Adjusts the shape of the projected image in left bottom corner.  
[-]: Decrease the horizontal value.  
[+]: Increase the horizontal value.  
Adjusts the shape of the projected image in right top corner.  
[-]: Decrease the vertical value.  
[+]: Increase the vertical value.  
Right Top H  
Right Bottom V  
Right Bottom H  
Adjusts the shape of the projected image in right top corner.  
[-]: Decrease the horizontal value.  
[+]: Increase the horizontal value.  
Adjusts the shape of the projected image in right bottom corner.  
[-]: Decrease the vertical value.  
[+]: Increase the vertical value.  
Adjusts the shape of the projected image in right bottom corner.  
[-]: Decrease the horizontal value.  
[+]: Increase the horizontal value.  
Line Distortion  
Left Distortion  
Adjusts the shape of the projected image in left side distortion.  
[-]: Decrease the left side distortion value.  
[+]: Increase the left side distortion value.  
Right Distortion  
Distortion Position V  
Top Distortion  
Adjusts the shape of the projected image in right side distortion.  
[-]: Decrease the right side distortion value.  
[+]: Increase the right side distortion value.  
Adjusts the vertical distortion position.  
[-]: Decrease the vertical distortion position value.  
[+]: Increase the vertical distortion position value.  
Adjusts the shape of the projected image in top side distortion.  
[-]: Decrease the top side distortion value.  
[+]: Increase the top side distortion value.  
Bottom Distortion  
Distortion Position H  
Adjusts the shape of the projected image in bottom side distortion.  
[-]: Decrease the bottom side distortion value.  
[+]: Increase the bottom side distortion value.  
Adjusts the horizontal distortion position.  
[-]: Decrease the horizontal distortion position value.  
[+]: Increase the horizontal distortion position value.  
After the confirmation message, the Perfect Fit function will be initialized.  
Reset  
© 3M 2012. All Rights Reserved.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[AUDIO] Tab  
Function  
Volume  
General Description  
Adjusts the volume.  
[-]: Decrease the volume value.  
[+]: Increase the volume value.  
Speaker  
Turns on/off the built-in speaker.  
On / Off  
Mic Level  
Mic Volume  
Switches the input level to match that of the microphone connected to the MIC port.  
High / Low  
Adjusts the volume of the microphone connected to the MIC port.  
[-]: Decrease the volume of the microphone.  
[+]: Increase the volume of the microphone.  
Audio Source - Computer in1 Assigns the audio port when the COMPUTER IN1 input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Audio Source - Computer in2 Assigns the audio port when the COMPUTER IN2 input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Audio Source - LAN  
Assigns the audio port when the LAN input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Audio Source - USB type A  
Audio Source - USB type B  
Audio Source - HDMI  
Audio Source - Component  
Audio Source - S-Video  
Audio Source - Video  
Audio Source - Standby  
HDMI Audio  
Assigns the audio port when the USB TYPE A input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the audio port when the USB TYPE B input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the audio port when the HDMI input port is selected.  
Audio HDMI / Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the audio port when the COMPONENT input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the audio port when the S-VIDEO input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the audio port when the VIDEO input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the audio port in the standby mode.  
Audio in1 / Audio in2 / Audio in3 / Off  
Switches the mode for the HDMI audio.  
1 / 2  
[SCREEN] Tab  
Function  
General Description  
Language  
Switches the OSD (On Screen Display) language.  
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /  
Simplified Chinese / Traditional Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish  
Adjusts the menu position.  
Menu Position  
[
[
[
[
]: Increase the vertical menu position value.  
]: Decrease the vertical menu position value.  
]: Decrease the horizontal menu position value.  
]: Increase the horizontal menu position value.  
Blank  
Switches the mode for the blank screen.  
MyScreen / Original / Blue / White / Black  
Switches the mode for the start-up screen.  
MyScreen / Original / Off  
Start Up  
MyScreen Lock  
Message  
Template  
Turns on/off the MyScreen lock function.  
On / Off  
Turns on/off the message function.  
On / Off  
Switches the mode for the template screen.  
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2 /  
Stack  
C.C. – Display  
C.C. – Mode  
C.C. - Channel  
Reset  
Selects the Closed Caption Display setting.  
Auto / On / Off  
Selects the Closed Caption Mode setting.  
Captions / Text  
Selects the Closed Caption Channel setting.  
1 / 2 / 3 / 4  
Initialize the selected function.  
Menu Position V / Menu Position H  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[OPTION] Tab  
Function  
General Description  
Auto Search  
Turns on/off the automatic signal search function.  
On / Off  
Auto Keystone  
Direct Power On  
Auto Power Off  
Turns on/Off the automatic keystone function.  
On / Off  
Turns on/off the Direct Power On function.  
On / Off  
Adjusts the time to count down to automatically turn the projector off.  
[-]: Decrease the Auto Power off time.  
[+]: Increase the Auto Power off time.  
USB type B  
My Button-1  
Selects the function of USB TYPE B port.  
Mouse / USB Display  
Assigns the function for the MY BUTTON-1 button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /  
Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /  
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other  
Assigns the function for the MY BUTTON-2 button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /  
Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /  
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other  
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /  
Video  
My Button-2  
My Source  
Service  
Function  
General Description  
Remote Freq. - Normal  
Changes the projector’s remote sensor on/off of the normal frequency.  
Enable / Disable  
Remote Freq. - High  
Changes the projector’s remote sensor on/off of the high frequency.  
Enable / Disable  
[OTHER] Tab  
Function  
Power  
General Description  
Turns on/off the power.  
On / Off  
Input Source  
Picture Mode  
Switches the input source.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /  
Video  
Switches the picture mode.  
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom  
Custom is displayed only. It cannot be set.  
Turns on/off the blank.  
On / Off  
Turns on/off the mute.  
On / Off  
Blank On/Off  
Mute  
Freeze  
Turns off/on the freeze.  
Normal / Freeze  
Magnify  
Adjusts the magnify setting.  
[-]: Decrease the magnify value.  
[+]: Increase the magnify value.  
Adjusts the magnify position.  
Magnify Position  
[
[
[
[
]: Decrease the vertical magnify position value.  
]: Increase the vertical magnify position value.  
]: Decrease the horizontal magnify position value.  
]: Increase the horizontal magnify position value.  
Template  
Turns on/off the template screen.  
On / Off  
My Image  
Displays the My Image data.  
Image-Off / Image-1 / Image-2 / Image-3 / Image-4  
My Image Delete  
Messenger  
Deletes the My Image data.  
Image-1 / Image-2 / Image-3 / Image-4  
Displays the Messenger.  
Message-Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 /  
Message-6 / Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12  
© 3M 2012. All Rights Reserved.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CL33X / CL35X / X21i / X26i  
[STATUS] Tab  
Function  
Power  
General Description  
Displays the current power status.  
On / Standby / Cool down  
Input Source  
Error Status  
Displays the current Input source.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video  
Displays the current error status.  
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error /  
Other Error  
Blank On/Off  
Mute  
Displays the current blank on/off status.  
On / Off  
Displays the current mute status.  
On / Off  
Freeze  
Displays the current freeze status.  
Normal / Freeze  
Lamp Time  
Filter Time  
Reset  
Displays the usage time for the current lamp.  
Displays the usage time for the current filter.  
Initialize the selected function.  
Lamp Time / Filter Time  
[Execute]: After the confirmation message, the selected function will be initialized.  
[PICTURE] Tab  
Function  
General Description  
Brightness  
Adjusts the brightness.  
[-]: Decrease the brightness value.  
[+]: Increase the brightness value.  
Contrast  
Gamma  
Color Temp  
Color  
Adjusts the contrast.  
[-]: Decrease the contrast value.  
[+]: Increase the contrast value.  
Switches the gamma mode.  
Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 /  
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6  
Switches the color temperature mode.  
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 /  
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6  
Adjusts the strength of whole color.  
[-]: Decrease the color value.  
[+]: Increase the color value  
Tint  
Adjusts the tint.  
[-]: Decrease the tint value.  
[+]: Increase the tint value.  
Sharpness  
My Memory  
Adjusts the sharpness.  
[-]: Decrease the sharpness value.  
[+]: Increase the sharpness value.  
Saves the current adjustment data into the memory.  
Save-1 / Save-2 / Save-3 / Save-4  
Loads the data from the memory.  
Load-1 / Load-2 / Load-3 / Load-4  
[Execute]: Performs each function.  
Reset  
Initialize the selected function.  
Brightness / Contrast / Color / Tint / Sharpness  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gamma - Custom -  
Function  
General Description  
Test Pattern  
Changes the test pattern.  
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp  
Gamma Point 1  
Gamma Point 2  
Gamma Point 3  
Gamma Point 4  
Gamma Point 5  
Gamma Point 6  
Gamma Point 7  
Gamma Point 8  
Adjusts the user gamma point 1.  
[-]: Decrease the user gamma point 1 value.  
[+]: Increase the user gamma point 1 value.  
[Reset]: Initialize the user gamma point 1 value.  
Adjusts the user gamma point 2.  
[-]: Decrease the user gamma point 2 value.  
[+]: Increase the user gamma point 2 value.  
[Reset]: Initialize the user gamma point 2 value.  
Adjusts the user gamma point 3.  
[-]: Decrease the user gamma point 3 value.  
[+]: Increase the user gamma point 3 value.  
[Reset]: Initialize the user gamma point 3 value.  
Adjusts the user gamma point 4.  
[-]: Decrease the user gamma point 4 value.  
[+]: Increase the user gamma point 4 value.  
[Reset]: Initialize the user gamma point 4 value.  
Adjusts the user gamma point 5.  
[-]: Decrease the user gamma point 5 value.  
[+]: Increase the user gamma point 5 value.  
[Reset]: Initialize the user gamma point 5 value.  
Adjusts the user gamma point 6.  
[-]: Decrease the user gamma point 6 value.  
[+]: Increase the user gamma point 6 value.  
[Reset]: Initialize the user gamma point 6 value.  
Adjusts the user gamma point 7.  
[-]: Decrease the user gamma point 7 value.  
[+]: Increase the user gamma point 7 value.  
[Reset]: Initialize the user gamma point 7 value.  
Adjusts the user gamma point 8.  
[-]: Decrease the user gamma point 8 value.  
[+]: Increase the user gamma point 8 value.  
[Reset]: Initialize the user gamma point 8 value.  
Color Temp - Custom -  
Function  
General Description  
Test Pattern  
Changes the test pattern.  
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp  
Color Temp Gain R  
Color Temp Gain G  
Color Temp Gain B  
Color Temp Offset R  
Color Temp Offset G  
Color Temp Offset B  
Adjusts the red color temperature gain.  
[-]: Decrease the red color temperature gain value.  
[+]: Increase the red color temperature gain value.  
[Reset]: Initialize the red color temperature gain value.  
Adjusts the green color temperature gain.  
[-]: Decrease the green temperature temp gain value.  
[+]: Increase the green color temperature gain value.  
[Reset]: Initialize the green color temperature gain value.  
Adjusts the blue color temperature gain.  
[-]: Decrease the blue color temperature gain value.  
[+]: Increase the blue color temperature gain value.  
[Reset]: Initialize the blue color temperature gain value.  
Adjusts the red color temperature offset.  
[-]: Decrease the red color temperature offset value.  
[+]: Increase the red color temperature offset value.  
[Reset]: Initialize the red color temperature offset value.  
Adjusts the green color temperature offset.  
[-]: Decrease the green color temperature offset value.  
[+]: Increase the green color temperature offset value.  
[Reset]: Initialize the green color temperature offset value.  
Adjusts the blue color temperature offset.  
[-]: Decrease the blue color temperature offset value.  
[+]: Increase the blue color temperature offset value.  
[Reset]: Initialize the blue color temperature offset value.  
© 3M 2012. All Rights Reserved.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[IMAGE] Tab  
Function  
Aspect  
General Description  
Switches the mode for aspect ratio.  
Normal / 4:3 / 16:9 / 16:10 / 14:9  
Adjusts the over-scan ratio.  
[-]: Decrease the over scan value.  
[+]: Increase the over scan value.  
Adjusts the display position.  
Over Scan  
Position  
[
[
[
[
]: Increase the vertical position value.  
]: Decrease the vertical position value.  
]: Increase the horizontal position value.  
]: Decrease the horizontal position value.  
H Phase  
H Size  
Adjusts the horizontal phase to eliminate flicker.  
[-]: Decrease the horizontal phase value.  
[+]: Increase the horizontal phase value.  
Adjusts the horizontal size.  
[-]: Decrease the horizontal size value.  
[+]: Increase the horizontal size value.  
Auto Adjust  
Reset  
[Execute]: Performs the automatic adjustment feature.  
Initialize the selected function.  
Over Scan / V Position / H Position / H Size  
[Execute]: After the confirmation message, the selected function will be initialized.  
[INPUT] Tab  
Function  
General Description  
Progressive  
Switches the progress mode.  
TV / Film / Off  
Video NR  
Switches the noise reduction mode.  
High / Mid / Low  
Color Space  
Switches the mode for color space.  
Auto / RGB / SMPTE240 / REC709 / REC601  
Switches the mode for video format of the S-VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Switches the mode for video format of the VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Switches the video format for an input from the HDMI port.  
Auto / Video / Computer  
Video Format - S-Video  
Video Format - Video  
HDMI Format  
HDMI Range  
Changes the digital range for an input from the HDMI port.  
Auto / Normal / Enhanced  
Computer in - Computer in1  
Computer in - Computer in2  
Frame Lock - Computer in1  
Frame Lock - Computer in2  
Frame Lock - HDMI  
Selects the computer input signal type of the COMPUTER IN1 port.  
Auto / Sync On G Off  
Selects the computer input signal type of the COMPUTER IN2 port.  
Auto / Sync On G Off  
Selects the frame lock function on/off of the COMPUTER IN1 port.  
On / Off  
Selects the frame lock function on/off of the COMPUTER IN2 port.  
On / Off  
Selects the frame lock function on/off of the HDMI port.  
On / Off  
© 3M 2012. All Rights Reserved.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[SETUP] Tab  
Function  
General Description  
Auto Keystone  
Keystone V  
[Execute]: Performs the automatic keystone distortion correction.  
Corrects the vertical keystone distortion.  
[-]: Decrease the vertical keystone value.  
[+]: Increase the vertical keystone value.  
Turns on/off the auto eco mode.  
Auto Eco Mode  
On / Off  
Eco Mode  
Switches the eco mode.  
Normal / Eco / Intelligent Eco  
Installation  
Switches the mode for installation status.  
Front/Desktop / Rear/Desktop / Rear/Ceiling / Front/Ceiling  
Switches the standby mode setting.  
Standby Mode  
Normal / Saving  
Monitor Out - Computer in1  
Monitor Out - Computer in2  
Monitor Out - LAN  
Monitor Out - USB type A  
Monitor Out - USB type B  
Monitor Out - HDMI  
Monitor Out - S-Video  
Monitor Out - Video  
Monitor Out - Standby  
Reset  
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.  
Computer in1 / Off  
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.  
Computer in2 / Off  
Assigns the MONITOR OUT when the LAN input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the USB TYPE A input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the USB TYPE B input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the HDMI input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the S-VIDEO input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the VIDEO input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT in the standby mode.  
Computer in1 / Computer in2 / Off  
Initialize the selected function.  
Keystone V  
[Execute]: After the confirmation message, the selected function will be initialized.  
[AUDIO] Tab  
Function  
Volume  
General Description  
Adjusts the volume.  
[-]: Decrease the volume value.  
[+]: Increase the volume value.  
Turns on/off the built-in speaker.  
On / Off  
Speaker  
Audio Source - Computer in1 Assigns the audio port when the COMPUTER IN1 input port is selected.  
Audio in1 / Audio in2 / Off  
Audio Source - Computer in2 Assigns the audio port when the COMPUTER IN2 input port is selected.  
Audio in1 / Audio in2 / Off  
Audio Source - LAN  
Assigns the audio port when the LAN input port is selected.  
LAN / Audio in1 / Audio in2 / Off  
Audio Source - USB type A  
Audio Source - USB type B  
Audio Source - HDMI  
Audio Source - S-Video  
Audio Source - Video  
Audio Source - Standby  
HDMI Audio  
Assigns the audio port when the USB TYPE A input port is selected.  
Audio in1 / Audio in2 / Off  
Assigns the audio port when the USB TYPE B input port is selected.  
USB type B / Audio in1 / Audio in2 / Off  
Assigns the audio port when the HDMI input port is selected.  
Audio HDMI / Audio in1 / Audio in2 / Off  
Assigns the audio port when the S-VIDEO input port is selected.  
Audio in1 / Audio in2 / Off  
Assigns the audio port when the VIDEO input port is selected.  
Audio in1 / Audio in2 / Off  
Assigns the audio port in the standby mode.  
Audio in1 / Audio in2 / Off  
Switches the mode for the HDMI audio.  
1 / 2  
© 3M 2012. All Rights Reserved.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[SCREEN] Tab  
Function  
General Description  
Language  
Switches the OSD (On Screen Display) language.  
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /  
Simplified Chinese / Traditional Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish  
Adjusts the menu position.  
Menu Position  
[
[
[
[
]: Increase the vertical menu position value.  
]: Decrease the vertical menu position value.  
]: Decrease the horizontal menu position value.  
]: Increase the horizontal menu position value.  
Blank  
Switches the mode for the blank screen.  
MyScreen / Original / Blue / White / Black  
Switches the mode for the start-up screen.  
MyScreen / Original / Off  
Start Up  
MyScreen Lock  
Message  
Turns on/off the MyScreen lock function.  
On / Off  
Turns on/off the message function.  
On / Off  
Template  
Switches the mode for the template screen.  
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2  
Selects the Closed Caption Display setting.  
Auto / On / Off  
Selects the Closed Caption Mode setting.  
Captions / Text  
Selects the Closed Caption Channel setting.  
1 / 2 / 3 / 4  
Initialize the selected function.  
C.C. - Display  
C.C. - Mode  
C.C. - Channel  
Reset  
Menu Position V / Menu Position H  
[Execute]: After the confirmation message, the selected function will be initialized.  
[OPTION] Tab  
Function  
General Description  
Auto Search  
Turns on/off the automatic signal search function.  
On / Off  
Auto Keystone  
Direct Power On  
Auto Power Off  
Turns on/Off the automatic keystone function.  
On / Off  
Turns on/off the Direct Power On function.  
On / Off  
Adjusts the time to count down to automatically turn the projector off.  
[-]: Decrease the auto power off time.  
[+]: Increase the auto power off time.  
USB type B  
My Button-1  
Selects the function of USB TYPE B port.  
Mouse / USB Display  
Assigns the function for the MY BUTTON-1 button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow /  
My Image / Messenger / Information / Auto Keystone / My Memory / Picture Mode / Filter Reset /  
Template / AV Mute / Resolution / Eco Mode / Other  
My Button-2  
My Button-Eco  
My Source  
Assigns the function for the MY BUTTON-2 button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow /  
My Image / Messenger / Information / Auto Keystone / My Memory / Picture Mode / Filter Reset /  
Template / AV Mute / Resolution / Eco Mode / Other  
Assigns the function for the MY BUTTON-Eco button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow /  
My Image / Messenger / Information / Auto Keystone / My Memory / Picture Mode / Filter Reset /  
Template / AV Mute / Resolution / Eco Mode / Blank / Freeze / Volume / Auto  
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video  
© 3M 2012. All Rights Reserved.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[OTHER] Tab  
Function  
Power  
General Description  
Turns on/off the power.  
On / Off  
Input Source  
Picture Mode  
Switches the input source.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video  
Switches the picture mode.  
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom  
Custom is displayed only. It cannot be set.  
Turns on/off the blank.  
On / Off  
Turns on/off the mute.  
On / Off  
Blank On/Off  
Mute  
Freeze  
Turns off/on the freeze.  
Normal / Freeze  
Magnify  
Adjusts the magnify setting.  
[-]: Decrease the magnify value.  
[+]: Increase the magnify value.  
Adjusts the magnify position.  
Magnify Position  
[
[
[
[
]: Decrease the vertical magnify position value.  
]: Increase the vertical magnify position value.  
]: Decrease the horizontal magnify position value.  
]: Increase the horizontal magnify position value.  
Template  
Turns on/off the template screen.  
On / Off  
My Image  
Displays the My Image data.  
Image-Off / Image-1 / Image-2 / Image-3 / Image-4  
My Image Delete  
Messenger  
Deletes the My Image data.  
Image-1 / Image-2 / Image-3 / Image-4  
Displays the Messenger.  
Message-Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 /  
Message-6 / Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12  
© 3M 2012. All Rights Reserved.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CL72X / CL73W / CL73X / NE7 / PL93X / WX36i / X31i / X36i / X46i  
[STATUS] Tab  
Function  
Power  
General Description  
Displays the current power status.  
On / Standby / Cool down  
Input Source  
Error Status  
Displays the current Input source.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video  
Displays the current error status.  
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error /  
Filter Error / Other Error  
Blank On/Off  
Mute  
Displays the current blank on/off status.  
On / Off  
Displays the current mute status.  
On / Off  
Freeze  
Displays the current freeze status.  
Normal / Freeze  
Lamp Time  
Filter Time  
Reset  
Displays the usage time for the current lamp.  
Displays the usage time for the current filter.  
Initialize the selected function.  
Lamp Time / Filter Time  
[Execute]: After the confirmation message, the selected function will be initialized.  
[PICTURE] Tab  
Function  
General Description  
Brightness  
Adjusts the brightness.  
[-]: Decrease the brightness value.  
[+]: Increase the brightness value.  
Contrast  
Gamma  
Color Temp  
Color  
Adjusts the contrast.  
[-]: Decrease the contrast value.  
[+]: Increase the contrast value.  
Switches the gamma mode.  
Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 / Default-7 /  
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 / Custom-7  
Switches the color temperature mode.  
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / Hi-Bright-4 /  
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 / Custom-7  
Adjusts the strength of whole color.  
[-]: Decrease the color value.  
[+]: Increase the color value  
Tint  
Adjusts the tint.  
[-]: Decrease the tint value.  
[+]: Increase the tint value.  
Sharpness  
Adjusts the sharpness.  
[-]: Decrease the sharpness value.  
[+]: Increase the sharpness value.  
Active Iris  
Changes the active iris control mode.  
Presentation / Theater / Off  
My Memory  
Saves the current adjustment data.  
Save-1 / Save-2 / Save-3 / Save-4  
Loads the data from the memory.  
Load-1 / Load-2 / Load-3 / Load-4  
[Execute]: Performs each function.  
Reset  
Initialize the selected function.  
Brightness / Contrast / Color / Tint / Sharpness  
[Execute]: After the confirmation message, the selected function will be initialized.  
© 3M 2012. All Rights Reserved.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Custom - Gamma -]  
Function  
General Description  
User Gamma Pattern  
Changes the test pattern.  
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp  
User Gamma Point 1  
User Gamma Point 2  
User Gamma Point 3  
User Gamma Point 4  
User Gamma Point 5  
User Gamma Point 6  
User Gamma Point 7  
User Gamma Point 8  
Adjusts the gamma point 1.  
[-]: Decrease the gamma point 1 value.  
[+]: Increase the gamma point 1 value.  
[Reset]: Initialize the gamma point 1 value.  
Adjusts the gamma point 2.  
[-]: Decrease the gamma point 2 value.  
[+]: Increase the gamma point 2 value.  
[Reset]: Initialize the gamma point 2 value.  
Adjusts the gamma point 3.  
[-]: Decrease the gamma point 3 value.  
[+]: Increase the gamma point 3 value.  
[Reset]: Initialize the gamma point 3 value.  
Adjusts the gamma point 4.  
[-]: Decrease the gamma point 4 value.  
[+]: Increase the gamma point 4 value.  
[Reset]: Initialize the gamma point 4 value.  
Adjusts the gamma point 5.  
[-]: Decrease the gamma point 5 value.  
[+]: Increase the gamma point 5 value.  
[Reset]: Initialize the gamma point 5 value.  
Adjusts the gamma point 6.  
[-]: Decrease the gamma point 6 value.  
[+]: Increase the gamma point 6 value.  
[Reset]: Initialize the gamma point 6 value.  
Adjusts the gamma point 7.  
[-]: Decrease the gamma point 7 value.  
[+]: Increase the gamma point 7 value.  
[Reset]: Initialize the gamma point 7 value.  
Adjusts the gamma point 8.  
[-]: Decrease the gamma point 8 value.  
[+]: Increase the gamma point 8 value.  
[Reset]: Initialize the gamma point 8 value.  
[Custom - Color Temp -]  
Function  
General Description  
User Gamma Pattern  
Changes the test pattern.  
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp  
Color Temp Gain R  
Color Temp Gain G  
Color Temp Gain B  
Color Temp Offset R  
Color Temp Offset G  
Color Temp Offset B  
Adjusts the color temperature gain R.  
[-]: Decrease the color temp gain R value.  
[+]: Increase the color temp gain R value.  
[Reset]: Initialize the color temp gain R value.  
Adjusts the color temperature gain G.  
[-]: Decrease the color temp gain G value.  
[+]: Increase the color temp gain G value.  
[Reset]: Initialize the color temp gain G value.  
Adjusts the color temperature gain B.  
[-]: Decrease the color temp gain B value.  
[+]: Increase the color temp gain B value.  
[Reset]: Initialize the color temp gain B value.  
Adjusts the color temperature offset R.  
[-]: Decrease the color temp offset R value.  
[+]: Increase the color temp offset R value.  
[Reset]: Initialize the color temp offset R value.  
Adjusts the color temperature offset G.  
[-]: Decrease the color temp offset G value.  
[+]: Increase the color temp offset G value.  
[Reset]: Initialize the color temp offset G value.  
Adjusts the color temperature offset B.  
[-]: Decrease the color temp offset B value.  
[+]: Increase the color temp offset B value.  
[Reset]: Initialize the color temp offset B value.  
© 3M 2012. All Rights Reserved.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[IMAGE] Tab  
Function  
Aspect  
General Description  
Switches the mode for aspect ratio.  
CL72X / CL73X / NE7 / PL93X / X31i / X36i / X46i  
Normal / 4:3 / 16:9 / 16:10 / 14:9  
CL73W / WX36i  
Normal / 4:3 / 16:9 / 16:10 / 14:9 / Native  
Over Scan  
Position  
Adjusts the over-scan ratio.  
[-]: Decrease the over scan value.  
[+]: Increase the over scan value.  
Adjusts the display position.  
[
[
[
[
]: Increase the vertical position value.  
]: Decrease the vertical position value.  
]: Increase the horizontal position value.  
]: Decrease the horizontal position value.  
H Phase  
H Size  
Adjusts the horizontal phase to eliminate flicker.  
[-]: Decrease the horizontal phase value.  
[+]: Increase the horizontal phase value.  
Adjusts the horizontal size.  
[-]: Decrease the horizontal size value.  
[+]: Increase the horizontal size value.  
Auto Adjust  
Reset  
[Execute]: Performs the automatic adjustment feature.  
Initialize the selected function.  
Over Scan / V Position / H Position / H Size  
[Execute]: After the confirmation message, the selected function will be initialized.  
[INPUT] Tab  
Function  
General Description  
Progressive  
Switches the progress mode.  
TV / Film / Off  
Video NR  
Switches the noise reduction mode.  
High / Mid / Low  
Color Space  
Switches the mode for color space.  
Auto / RGB / SMPTE240 / REC709 / REC601  
Switches the mode for video format of the S-VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Switches the mode for video format of the VIDEO port.  
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL  
Switches the video format for an input from the HDMI port.  
Auto / Video / Computer  
Video Format - S-Video  
Video Format - Video  
HDMI Format  
HDMI Range  
Changes the digital range for an input from the HDMI port.  
Auto / Normal / Enhanced  
Computer in - Computer in1  
Computer in - Computer in2  
Frame Lock - Computer in1  
Frame Lock - Computer in2  
Frame Lock - HDMI  
Selects the computer input signal type of the COMPUTER IN1 port.  
Auto / Sync On G Off  
Selects the computer input signal type of the COMPUTER IN2 port.  
Auto / Sync On G Off  
Selects the frame lock function on/off of the COMPUTER IN1 port.  
On / Off  
Selects the frame lock function on/off of the COMPUTER IN2 port.  
On / Off  
Selects the frame lock function on/off of the HDMI port.  
On / Off  
© 3M 2012. All Rights Reserved.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[SETUP] Tab  
Function  
General Description  
Auto Keystone  
Keystone V  
[Execute]: Performs the automatic keystone distortion correction.  
Corrects the vertical keystone distortion.  
[-]: Decrease the vertical keystone value.  
[+]: Increase the vertical keystone value.  
Turns on/off the auto eco mode.  
Auto Eco Mode  
On / Off  
Eco Mode  
Turns off/on the eco mode.  
Normal / Eco / Intelligent Eco / Saver  
Installation  
Switches the mode for mirror status.  
Front/Desktop / Rear/Desktop / Rear/Ceiling / Front/Ceiling  
Standby Mode  
Switches the standby mode setting.  
Normal / Saving  
Monitor Out - Computer in1  
Monitor Out - Computer in2  
Monitor Out - LAN  
Monitor Out - USB type A  
Monitor Out - USB type B  
Monitor Out - HDMI  
Monitor Out - S-Video  
Monitor Out - Video  
Monitor Out - Standby  
Reset  
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.  
Computer in1 / Off  
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.  
Computer in2 / Off  
Assigns the MONITOR OUT when the LAN input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the USB TYPE A input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the USB TYPE B input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the HDMI input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the S-VIDEO input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT when the VIDEO input port is selected.  
Computer in1 / Computer in2 / Off  
Assigns the MONITOR OUT in the standby mode.  
Computer in1 / Computer in2 / Off  
Initialize the selected function.  
Keystone V  
[Execute]: After the confirmation message, the selected function will be initialized.  
[AUDIO] Tab  
Function  
Volume  
General Description  
Adjusts the Volume.  
[-]: Decrease the volume.  
[+]: Increase the volume.  
Speaker  
Turns on/off the built-in speaker.  
On / Off  
Audio Source  
- Computer in1  
Assigns the AUDIO SOURCE when the COMPUTER IN1 input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Audio Source  
- Computer in2  
Audio Source - LAN  
Assigns the AUDIO SOURCE when the COMPUTER IN2 input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the AUDIO SOURCE when the LAN input port is selected.  
LAN / Audio in1 / Audio in2 / Audio in3 / Off  
Audio Source - USB type A  
Audio Source - USB type B  
Audio Source - HDMI  
Audio Source - S-Video  
Audio Source - Video  
Audio Source - Standby  
Mic Level  
Assigns the AUDIO SOURCE when the USB TYPE A input port is selected.  
USB type A / Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the AUDIO SOURCE when the USB TYPE B input port is selected.  
USB type B / Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the AUDIO SOURCE when the HDMI input port is selected.  
HDMI / Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the AUDIO SOURCE when the S-VIDEO input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the AUDIO SOURCE when the VIDEO input port is selected.  
Audio in1 / Audio in2 / Audio in3 / Off  
Assigns the AUDIO SOURCE in the standby mode.  
Audio in1 / Audio in2 / Audio in3 / Off  
Switches the input level to match that of the microphone connected to the MIC port.  
High / Low  
Mic Volume  
Adjusts the volume of the microphone connected to the MIC port.  
[-]: Decrease the volume of the microphone.  
[+]: Increase the volume of the microphone.  
© 3M 2012. All Rights Reserved.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[SCREEN] Tab  
Function  
General Description  
Language  
Switches the OSD language.  
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /  
Simplified Chinese / Traditional Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish /  
Danish / Czech / Hungarian / Romanian / Slovenian / Croatian / Greek / Lithuanian / Estonian /  
Latvian / Thai / Arabian / Persian / Portuguese -Brazil  
Menu Position  
Adjusts the menu position.  
[
[
[
[
]: Increase the vertical menu position.  
]: Decrease the vertical menu position.  
]: Decrease the horizontal menu position.  
]: Increase the horizontal menu position.  
Blank  
Switches the mode for the blank screen.  
MyScreen / Original / Blue / White / Black  
Switches the mode for the start-up screen.  
MyScreen / Original / Off  
Start Up  
MyScreen Lock  
Message  
Turns on/off the MyScreen lock function.  
On / Off  
Turns on/off the message function.  
On / Off  
Template  
Switches the mode for the template screen.  
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2  
Selects the Closed Caption Display setting.  
Auto / On / Off  
Selects the Closed Caption Mode setting.  
Captions / Text  
Selects the Closed Caption Channel setting.  
1 / 2 / 3 / 4  
Initialize the selected function.  
C.C. - Display  
C.C. - Mode  
C.C. - Channel  
Reset  
Menu Position V / Menu Position H  
[Execute]: After the confirmation message, the selected function will be initialized.  
[OPTION] Tab  
Function  
General Description  
Auto Search  
Turns on/off the automatic signal search function.  
On / Off  
Auto Keystone  
Direct Power On  
Auto Power Off  
Turns on/Off the automatic keystone function.  
On / Off  
Turns on/off the Direct Power On function.  
On / Off  
Adjusts the time to count down to automatically turn the projector off.  
[-]: Decrease the Auto Power off time.  
[+]: Increase the Auto Power off time.  
USB type B  
My Button-1  
Selects the function of USB TYPE B port.  
Mouse / USB Display  
Assigns the function for the MY BUTTON-1 button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video /  
Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /  
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode /  
Saver Mode / Other  
My Button-2  
Assigns the function for the MY BUTTON-2 button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video /  
Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /  
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode /  
Saver Mode / Other  
My Source  
[Service]  
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video  
Function  
General Description  
Remote Freq. - Normal  
Changes the projector’s remote sensor on/off of the normal frequency.  
Enable / Disable  
Remote Freq. - High  
Changes the projector’s remote sensor on/off of the high frequency.  
Enable / Disable  
© 3M 2012. All Rights Reserved.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[OTHER] Tab  
Function  
Power  
General Description  
Turns on/off the power.  
On / Off  
Input Source  
Picture Mode  
Switches the input source.  
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video  
Switches the picture mode.  
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Photo / Custom  
Custom is displayed only. It cannot be set.  
Turns on/off the blank.  
On / Off  
Turns on/off the mute.  
On / Off  
Blank On/Off  
Mute  
Freeze  
Turns off/on the freeze.  
Normal / Freeze  
Magnify  
Adjusts the magnify setting.  
[-]: Decrease the magnify value.  
[+]: Increase the magnify value.  
Adjusts the magnify position.  
Magnify Position  
[
[
[
[
]: Decrease the vertical magnify position.  
]: Increase the vertical magnify position.  
]: Decrease the horizontal magnify position.  
]: Increase the horizontal magnify position.  
Template On/Off  
My Image  
Turns on/off the template screen.  
On / Off  
Displays the My Image data.  
Off / Image-1 / Image-2 / Image-3 / Image-4  
My Image Delete  
Messenger  
Deletes the My Image data.  
Image-1 / Image-2 / Image-3 / Image-4  
Displays the Messenger.  
Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 / Message-6 /  
Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12  
© 3M 2012. All Rights Reserved.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.9 Image Send to Projector  
If the projector supports My Image (e-SHOT) feature, you can select My Image (e-SHOT) function. Click [Image  
Send] icon, the window [Send Image File to projector(s)] will be appeared.  
3.10 MY IMAGE (e-SHOT)  
Mark projectors that you will transfer an image.  
Select the image file that should be transferred and  
stored number. The compatible image file is only  
PJ1 format file that can be created by Projector  
Image Tool (PJImg). And then, click the Send  
button to transfer image.  
The progress bar is shown during transfer. The  
status will change “OK” if it succeeds.  
[Note]  
- This feature is only available for CL33X, CL35X,  
CL67N, CL69N, CL72X, CL73W, CL73X, CL86X,  
NE7, PL90X, PL92X, PL93X, WX36, WX36i, X21i,  
X26i, X30N, X31, X31i, X35N, X35NK, X36, X36i,  
X46, X46i, X56, X90 and X90K.  
- Please verify the port setting on the projector and  
the port / authentication setting on the application.  
Once you select the image file and store location number, the “Send” button becomes available. The compatible  
image file is only PJ1 format file that can be created by Projector Image Tool (PJImg).And then, click the Send  
button to transfer image. The maximum size of transferred file is depending on the model. Please check the  
following list.  
PJ1 format file  
CL33X / CL35X / CL67N / CL69N / CL72X / CL73W / CL73X / CL86X / NE7 / PL90X / PL92X / PL93X /  
WX36 / WX36i / X21i / X26i / X30N / X31 / X31i / X35N / X35NK / X36 / X36i / X46 / X46i / X56 / X90 / X90K  
Less than equal 130,816byte  
JPEG file  
CL33X / CL35X / CL67N / CL69N / CL72X / CL73W / CL73X / CL86X / NE7 / PL92X / PL93X / WX36 /  
WX36i / X21i / X26i / X31 / X31i / X36 / X36i / X46 / X46i / X56  
Less than equal 262,144byte  
3.11 Software Version  
You can check the software version information to click “About” icon, or choose “About Projector Control  
Application” on the menu.  
© 3M 2012. All Rights Reserved.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3M Stereo System 2210E User Manual
Activision Video Gaming Accessories 3 User Manual
Agri Fab Lawn Mower 45 0358 User Manual
Air King Ventilation Hood AK110LS User Manual
Alamo Lawn Mower JD 5225 User Manual
American Standard Hot Tub 047186 0070A User Manual
Audiovox Remote Starter 128 4246A User Manual
Avocent Switch SC8 DVI User Manual
Axor Indoor Furnishings 39148XX1 User Manual
Badger Basket Stroller 09941 User Manual