3D Connexion Refrigerator OL 10694 01 User Manual

Preface  
Audience  
Purpose  
This guide is for the networking or computer technician responsible for installing the Cisco Catalyst  
Blade Switch 3040 for FSC, referred to as the blade switch, in the Fujitsu Siemens Computers (FSC)  
PRIMERGY BX600 S2 blade server, referred to as the BX600 system. We assume that you are familiar  
with the concepts and terminology of Ethernet and local area networking.  
This guide describes the hardware features of the Cisco Catalyst Blade Switch 3040 for FSC. It describes  
the physical and performance characteristics of the blade switch, explains how to install it in the server  
chassis, and provides troubleshooting information.  
This guide does not describe system messages that you might receive or how to configure your blade  
switch. For more information, refer to the blade switch software configuration guide, the blade switch  
command reference, and the blade switch system message guide on the Cisco.com Product  
Documentation home page.  
Organization  
This guide is organized into these chapters:  
Chapter 1, “Product Overview,” is a physical and functional overview of the blade switch. It describes  
the blade switch ports, the standards they support, and the blade switch LEDs.  
Chapter 2, “Blade Switch Installation,” contains the procedures on how to install the blade switch in the  
server chassis and how to make port connections.  
Chapter 3, “Troubleshooting,” describes how to identify and resolve some of the problems that might  
arise when installing the blade switch.  
Appendix A, “Technical Specifications,” lists the physical and environmental specifications for the blade  
switch and the regulatory agency approvals.  
Appendix B, “Connector and Cable Specifications,” describes the connectors, cables, and adapters that  
can be used to connect to the blade switch.  
Appendix C, “Configuring the Switch with the CLI-Based Setup Program,” has an installation and setup  
procedure for a standalone blade switch.  
Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide  
OL-10694-01  
vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
Obtaining Documentation  
These compatibility matrix documents are available from this Cisco.com site:  
Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix (not orderable but available  
on Cisco.com)  
Cisco Small Form-Factor Pluggable Modules Compatibility Matrix (not orderable but available  
on Cisco.com)  
Compatibility Matrix for 1000BASE-T Small Form-Factor Pluggable Modules (not orderable  
but available on Cisco.com)  
Obtaining Documentation  
Cisco documentation and additional literature are available on Cisco.com. This section explains the  
product documentation resources that Cisco offers.  
Cisco.com  
You can access the most current Cisco documentation at this URL:  
You can access the Cisco website at this URL:  
You can access international Cisco websites at this URL:  
Product Documentation DVD  
The Product Documentation DVD is a library of technical product documentation on a portable medium.  
The DVD enables you to access installation, configuration, and command guides for Cisco hardware and  
software products. With the DVD, you have access to the HTML documentation and some of the  
PDF files found on the Cisco website at this URL:  
The Product Documentation DVD is created and released regularly. DVDs are available singly or by  
subscription. Registered Cisco.com users can order a Product Documentation DVD (product number  
DOC-DOCDVD= or DOC-DOCDVD=SUB) from Cisco Marketplace at the Product Documentation  
Store at this URL:  
Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide  
OL-10694-01  
ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preface  
Documentation Feedback  
Ordering Documentation  
You must be a registered Cisco.com user to access Cisco Marketplace. Registered users may order  
Cisco documentation at the Product Documentation Store at this URL:  
If you do not have a user ID or password, you can register at this URL:  
Documentation Feedback  
You can provide feedback about Cisco technical documentation on the Cisco Technical Support &  
Documentation site area by entering your comments in the feedback form available in every online  
document.  
Cisco Product Security Overview  
Cisco provides a free online Security Vulnerability Policy portal at this URL:  
From this site, you will find information about how to do the following:  
Report security vulnerabilities in Cisco products  
Obtain assistance with security incidents that involve Cisco products  
Register to receive security information from Cisco  
A current list of security advisories, security notices, and security responses for Cisco products is  
available at this URL:  
To see security advisories, security notices, and security responses as they are updated in real time, you  
can subscribe to the Product Security Incident Response Team Really Simple Syndication (PSIRT RSS)  
feed. Information about how to subscribe to the PSIRT RSS feed is found at this URL:  
Reporting Security Problems in Cisco Products  
Cisco is committed to delivering secure products. We test our products internally before we release  
vulnerability in a Cisco product, contact PSIRT:  
For emergencies only[email protected]  
An emergency is either a condition in which a system is under active attack or a condition for which  
a severe and urgent security vulnerability should be reported. All other conditions are considered  
nonemergencies.  
For nonemergencies[email protected]  
Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide  
OL-10694-01  
x
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
Product Alerts and Field Notices  
In an emergency, you can also reach PSIRT by telephone:  
1 877 228-7302  
1 408 525-6532  
Tip  
We encourage you to use Pretty Good Privacy (PGP) or a compatible product (for example, GnuPG) to  
encrypt any sensitive information that you send to Cisco. PSIRT can work with information that has been  
encrypted with PGP versions 2.x through 9.x.  
Never use a revoked encryption key or an expired encryption key. The correct public key to use in your  
correspondence with PSIRT is the one linked in the Contact Summary section of the Security  
Vulnerability Policy page at this URL:  
The link on this page has the current PGP key ID in use.  
If you do not have or use PGP, contact PSIRT to find other means of encrypting the data before sending  
any sensitive material.  
Product Alerts and Field Notices  
Modifications to or updates about Cisco products are announced in Cisco Product Alerts and Cisco Field  
Notices. You can receive Cisco Product Alerts and Cisco Field Notices by using the Product Alert Tool  
on Cisco.com. This tool enables you to create a profile and choose those products for which you want to  
receive information.  
To access the Product Alert Tool, you must be a registered Cisco.com user. (To register as a Cisco.com  
user, go to this URL: http://tools.cisco.com/RPF/register/register.do) Registered users can access the  
Obtaining Technical Assistance  
Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The  
Cisco Technical Support & Documentation website on Cisco.com features extensive online support  
resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center  
(TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact  
your reseller.  
Cisco Technical Support & Documentation Website  
The Cisco Technical Support & Documentation website provides online documents and tools for  
troubleshooting and resolving technical issues with Cisco products and technologies. The website is  
available 24 hours a day at this URL:  
Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide  
OL-10694-01  
xi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
Obtaining Technical Assistance  
Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com  
user ID and password. If you have a valid service contract but do not have a user ID or password, you  
can register at this URL:  
Note  
Use the Cisco Product Identification Tool to locate your product serial number before submitting a  
request for service online or by phone. You can access this tool from the Cisco Technical Support &  
Documentation website by clicking the Tools & Resources link, clicking the All Tools (A-Z) tab, and  
then choosing Cisco Product Identification Tool from the alphabetical list. This tool offers three search  
options: by product ID or model name; by tree view; or, for certain products, by copying and pasting  
show command output. Search results show an illustration of your product with the serial number label  
location highlighted. Locate the serial number label on your product and record the information before  
placing a service call.  
You can also locate the serial number for the blade switch in Chapter 3, “Troubleshooting,” Figure 3-1.  
Displaying and Searching on Cisco.com  
Tip  
If you suspect that the browser is not refreshing a web page, force the browser to update the web page  
by holding down the Ctrl key while pressing F5.  
To find technical information, narrow your search to look in technical documentation, not the entire  
Cisco.com website. On the Cisco.com home page, click the Advanced Search link under the Search box  
and then click the Technical Support & Documentation radio button.  
To provide feedback about the Cisco.com website or a particular technical document, click Contacts &  
Feedback at the top of any Cisco.com web page.  
Submitting a Service Request  
Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and  
S4 service requests are those in which your network is minimally impaired or for which you require  
product information.) After you describe your situation, the TAC Service Request Tool provides  
recommended solutions. If your issue is not resolved using the recommended resources, your service  
request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL:  
For S1 or S2 service requests, or if you do not have Internet access, contact the Cisco TAC by telephone.  
(S1 or S2 service requests are those in which your production network is down or severely degraded.)  
Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business  
operations running smoothly.  
To open a service request by telephone, use one of the following numbers:  
Asia-Pacific: +61 2 8446 7411  
Australia: 1 800 805 227  
EMEA: +32 2 704 55 55  
Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide  
OL-10694-01  
xii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
Obtaining Additional Publications and Information  
For a complete list of Cisco TAC contacts, go to this URL:  
Definitions of Service Request Severity  
To ensure that all service requests are reported in a standard format, Cisco has established severity  
definitions.  
Severity 1 (S1)—An existing network is “down” or there is a critical impact to your business operations.  
You and Cisco will commit all necessary resources around the clock to resolve the situation.  
Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your  
business operations are negatively affected by inadequate performance of Cisco products. You and  
Cisco will commit full-time resources during normal business hours to resolve the situation.  
Severity 3 (S3)—Operational performance of the network is impaired while most business operations  
remain functional. You and Cisco will commit resources during normal business hours to restore service  
to satisfactory levels.  
Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or  
configuration. There is little or no effect on your business operations.  
Obtaining Additional Publications and Information  
Information about Cisco products, technologies, and network solutions is available from various online  
and printed sources.  
The Cisco Online Subscription Center is the website where you can sign up for a variety of  
Cisco e-mail newsletters and other communications. Create a profile and then select the  
subscriptions that you would like to receive. To visit the Cisco Online Subscription Center,  
go to this URL:  
The Cisco Product Quick Reference Guide is a handy, compact reference tool that includes brief  
product overviews, key features, sample part numbers, and abbreviated technical specifications for  
many Cisco products that are sold through channel partners. It is updated twice a year and includes  
the latest Cisco channel product offerings. To order and find out more about the Cisco Product Quick  
Reference Guide, go to this URL:  
Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo  
merchandise. Visit Cisco Marketplace, the company store, at this URL:  
Cisco Press publishes a wide range of general networking, training, and certification titles. Both new  
and experienced users will benefit from these publications. For current Cisco Press titles and other  
information, go to Cisco Press at this URL:  
Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering  
professionals involved in designing, developing, and operating public and private internets and  
intranets. You can access the Internet Protocol Journal at this URL:  
Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide  
OL-10694-01  
xiii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
Obtaining Additional Publications and Information  
Networking products offered by Cisco Systems, as well as customer support services, can be  
obtained at this URL:  
Networking Professionals Connection is an interactive website where networking professionals  
share questions, suggestions, and information about networking products and technologies with  
Cisco experts and other networking professionals. Join a discussion at this URL:  
“What’s New in Cisco Documentation” is an online publication that provides information about the  
latest documentation releases for Cisco products. Updated monthly, this online publication is  
organized by product category to direct you quickly to the documentation for your products. You  
can view the latest release of “What’s New in Cisco Documentation” at this URL:  
World-class networking training is available from Cisco. You can view current offerings at  
this URL:  
Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide  
OL-10694-01  
xiv  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Two Way Radio 860 User Manual
Accell Bicycle Accessories Cardio Comfort Pacer User Manual
AEG Microwave Oven MC1753E User Manual
Aga Ranges Oven U110054 03A User Manual
Altec Lansing MP3 Docking Station iM510 User Manual
American Audio CD Player CDI 100 User Manual
Atlantis Land Switch A02 F24 2C User Manual
Audiovox Automobile Electronics CMOS2 User Manual
Axis Communications Security Camera P1427 LE User Manual
Beko Microwave Oven D 6633 User Manual