MCD 299
Quick start guide
What’s in the Box?
You should find these items upon opening the box.
Remote control with two
1 x main unit stand
2 x speaker stands
FM and MW antennas
AAA batteries
User 2
Manual
1
Wall Mounting
3
Q
uick Start Guide
A/V cord (R/W/Y)
Component video cables
(red/blue/green)
Quick Start Guide
Wall Mounting
User Manual
6 x screws and dowels
2 x speaker brackets
15-pin D-Sub cable
MCD299 QSG_98_Eng
1
2007.9.27, 13:01
Setting the clock
1
In standby mode, press and hold CLOCK on the front panel.
2
Press à / á to set the hours.
3
Press í/ë to set the minutes
4
Press PROGRAM to select clock mode.
5
Press CLOCK to confirm the time.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connectedTV does not support
progressive signals or the cables are not connected accordingly, see the user
manual for proper progressive scan setup.
– – Video Setup Page – –
TV Display
– – General Setup Page – –
OSD Lang
PROGRESS
Screen Saver
TV Type
– – Audio Setup Page – –
NIGHT MODE
– – Preference Page – –
Audio
DIGITAL Output
Subtile
Dolby Digital Setup
Disc Menu
Parental
Password
Default
Tip
See chapters "Preparation" and "System Menu Options" in the User
Manual for detailed descriptions.
MCD299 QSG_98_Eng
3
2007.9.27, 13:01
C
Enjoy
Playing a disc
1
Press LEFT ç or RIGHT ç on the front panel (L ç or R çon the remote
control) to open the left or right disc door respectively.
/
/
/
2
Insert one or more discs with the printed side facing you. Press LEFT ç or
RIGHT ç on the front panel (L ç or R çon the remote control) again to close
the disc door.
3
Use DISC 1/2/3/4 to select a disc for playback.
➜ Playback will start automatically. If not press ÉÅ.
4
To stop playback, press 9 .
Programming and tuning to radio stations
1
Press SOURCE on the front panel of the system repeatedly or TUNER on the
remote to select the tuner source.
2
Press PROGRAM for more than two seconds to program all available stations in
order of waveband.
3
Press í / ë until the desired preset station is displayed.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
Insert the USB device’s USB plug into the socket
on the set.
2
Press SOURCE once or more (or USB on the remote control) to select USB.
3
Play the USB’s audio files as you do with the albums/tracks on a CD,
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
PDCC-JS/JW-0740
MCD299 QSG_98_Eng
4
2007.9.27, 13:01
|