1
Connect the speaker (subwoofer) cables.
Tips
– See the User Manual for otherTV
connection options.
2
Connect the FM antenna.
– For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
– Never connect the AC power cord
before connection of the DIN cable to
avoid causing any damage to the set.
3
Connect the A/V cord to a TV.
4
Connect the power cords of the system andTV.
AC power
S-VIDEO
IN
AUDIO
IN
TV IN
VIDEO IN
4
S-VIDEO
IN
AUDIO
IN
T
V
I
N
V
I
D
E
O
I
N
AC power
4
3
1
Speaker
(left)
Speaker
(right)
1
2
1
FM antenna
USB/AUX
DIM
Setting up theTV
1
Press SOURCE (DISC on the remote control) to select disc source.
2
Turn on theTV and set it to the correctVideo In channel.
Playing a disc
1
e
Insert a disc into the slot loader.
i
Pr
S
i
n
d
➜ Make sure the label side is facing you.
t
e
➜ Make sure you have removed any other disc from the slot loader.
2
Playback will start automatically. If not pressÉÅ.
3
To stop playback, press 9.
Programming and tuning to radio stations
1
Press SOURCE (TUNER on the remote control) to select tuner source.
2
Press PROGRAM on the remote control for more than two seconds to program all available stations in order of
waveband.
3
Press PRESET ¡ / ™ until the desired preset station is displayed.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
Insert the USB device’s USB plug into the socket
on the set.
2
IMPORTANT!
Slide down to
expose some
Press SOURCE once or more to select USB (or USB/AUX on the remote control).
buttons and jacks on
the front panel!
3
Play the USB’s audio files as you do with the albums/tracks on a CD,
|