Philips KALA Vox 200 User Manual

CONTENTS  
INSTALLING TELEPHONE AND BASE STATION  
1. CONTENTS  
1
2
Placing the base station  
In order to reduce the risk of interference, place the base station at least 1m away from any other  
electrical appliance (telephone, television, computer, etc.)  
The base station should be placed on a flat surface.  
The base station should not be kept in a damp room, near a heat source or close to obstacles such  
as thick walls or metallic structures.  
4. THE DISPLAY  
Inserting/Replacing batteries  
+
-
+
-
Your handset is powered by two rechargeable AA/R6 batteries.  
Only AA 600 mAh rechargeable batteries should be used as replacements.  
Never use non rechargeable batteries.  
1. Slide down the cover  
on the back of the telephone.  
2. Insert batteries following the diagram.  
1
2
3. Close the cover.  
Telephone connection  
On the bottom of the base station:  
1
. Connect the power supply (B) into the base station then  
plug the power adaptor into the easily accessible wall  
socket.  
A
B
2. Connect the telephone cord (A) to the base station and  
then to the PTT wall socket.  
Place the handset on the base station (charging unit).  
A
B
Charging/Recharging the telephone  
While the batteries are being charged,  
When the battery icon on the display shows  
flashes on the screen and shows  
, the batteries are fully charged.  
.
You will hear a validation beep when you place the handset on the base station.  
On first use or when new batteries have been inserted, charge the batteries for at least 24 hours.  
You will hear a beep when you activate the telephone if the batteries need to be charged.  
Telephone range  
Your telephone has a range of : 50m indoors - 350m outdoors.  
The symbol on the display indicates that the handset is connected on the base station.  
Installing another KALA 200 handset  
Additional handsets do not require additional telephone connections but do need a power  
supply adaptor. The reference of Additional Kala 200 handsets is TD 6830.  
PRESENTATION OF TELEPHONE AND ACCESSORIES  
3
When using your telephone,  
3 beep types will  
be heard:  
Earpiece  
• the error beep  
• the validation beep  
• the invitation beep  
,
Family  
phonebook  
key  
Redial  
list key  
,
.
User guide  
Beep indicators  
Friends  
phonebook  
key  
Call  
The key located  
log key  
on the base sta-  
tion side can be  
used to make all  
handsets ring at  
The handset may also be placed  
on the base station with the key-  
pad face-up.  
Talk key  
To make  
an external call,  
end an external  
call, and answer  
an external call.  
To call all internal  
handsets recognised  
by the base station or  
put a call on hold  
(with hold music).  
the same time  
.
(“internal call” key).  
Telephone cable  
Only use the power and telephone cables  
supplied with the telephone.  
Programming  
key  
Press  
1x : activate loudspeaker  
Mains adapter  
2x : increase or decrease the volume  
of the loudspeaker  
3x : deactivate loudspeaker  
Use this button to increase or decrease  
the volume depending on the setting  
you have previously chosen.  
The batteries contain Cadmium and must be disposed of in compliance  
with the waste disposal regulations. Never use non-rechargeable  
batteries. The manufacturer assumes no responsibility for non-respect  
of these regulations.  
Functions keys:  
moves to the left, or displays the previous entry.  
moves to the right, or displays the following entry.  
validates the entry.  
The crossed-out dustbin signifies that the battery should not be  
disposed of with general household waste.  
press: removes a character during entry. press and hold:  
exit any mode (programming, phonebooks or lists).  
+
Direct access  
How to optimise batteries lifespan  
to listen to mes-  
sages and program  
some functions of  
the answering  
machine. This back  
lit key also  
If you plan not to use your phone for at least 15 days,  
+
Modes:  
list of last incoming calls.  
we would suggest you to remove the batteries from  
-
the handset if you disconnect the mains power.  
-
list of last numbers dialled (redial key).  
program the telephone.  
indicates new  
Batteries  
messages.  
                 
THE DISPLAY  
4
icon  
status  
description  
on  
1/4 full  
off  
full  
Additional  
handset  
setting  
less than 1/2 hour  
discharged  
charging  
Ringing  
melodies  
setting  
battery  
flashing  
Settings  
on  
off  
new log entry  
no new log entry  
Answering  
machine  
setting  
call log  
on  
flashing  
programming  
friends  
phonebook  
Earpiece  
volume  
setting  
on  
flashing  
call in progress or made from call log  
call arriving or telephone answering machine operating  
external  
Icons for common functions  
on  
external call on hold  
or if a second or another handset: internal call in progress  
on hold/  
internal call  
Programming icons  
on  
flashing  
programming  
family  
phonebook  
on  
off  
flashing  
telephone answering machine is on  
telephone answering machine is off  
telephone answering machine is full  
Telephone  
Answering  
Machine  
on  
off  
flashing  
old message(s)  
no message(s)  
new message(s)  
messages  
antenna  
Scrolling  
arrows  
on  
off  
flashing  
in range  
10 character screen  
handset not registered to the base station  
out of range  
USING THE TELEPHONE  
Press the “Friends“ or “Family“ phonebook key to access the chosen phonebook.  
5
Note: only phonebooks containing entries can be accessed (otherwise, you have a beep error).  
Pressing a second time while scrolling will exit the phonebook.  
Talk key  
Your phone rings. Press the "talk" key to be connected. Press the same key to hang up.  
Call directly/Hang up  
Enter your number, then press the "talk" key. Press the "talk" key to hang up.  
*Caller identification service: This function is available if you have subscribed to your operator’s  
Caller identification service. The network sends the caller’s number to your telephone. If this num-  
ber is stored in the Family or Friends phonebook, the corresponding icon will appear and the rel-  
Operating the loudspeaker  
Press the "loudspeaker" key to adjust the loudspeaker:  
• pressing the key once activates the loudspeaker,  
• pressing the key a second time increases or decreases the volume,  
• pressing the key a third time deactivates the loudspeaker.  
The previous volume setting is automatically used when the loud-  
speaker is re-activated.  
Placing a call on hold and transferring a call  
Press the ”internal call” key to place a call on hold, during which the person calling will hear music.  
Press the "internal call" key to transfer a call (this option is only available if you have more than one  
handset). All the handsets on the base station will then be called. There is no need to wait for the call  
receiver to pick up before hanging up (by pressing the "talk" key).  
USING THE PHONEBOOKS  
6
Selecting the ringer type  
You have the possibility to change the pre-recorded  
melody of the Friends and Family phonebooks (see  
Storing numbers in a phonebook  
Each entry is made up of a name (maximum 10 characters) and  
a telephone number (maximum 25 characters).  
You have access to two phonebooks, each containing10 files  
To store an entry:  
(name and numbers).  
1. Enter the phone number, or have it displayed using one of  
You can use these phonebooks to make calls and identify incoming calls if  
When your receive an incoming call and the caller’s number is stored in  
How to obtain the characters:  
*
or  
3. After the beep, enter the name (see How to obtain the characters*)  
and press the key to validate.  
2. Press the key of the desired phonebook  
.
Press the key several times  
1x  
4x  
one of the phonebook, the corresponding  
or  
icon will be dis-  
2x 3x  
5x  
played and the associated melody will play after the second ring if you  
have subscibed to the Caller identification service.  
A validation beep sounds which indicates you go back to idle mode.  
If your country uses local prefixes, you will need to include these  
codes in your phonebook entries to ensure the Caller  
identification service works correctly.  
space  
G
Caller identification service:  
A
2
D
3
B C  
K L  
U V  
E F  
-
1
!
The Caller identification function is available if you have subscribed  
to the Caller identification service.  
Calling from a phonebook  
4
J
T
5
M
6
H I  
N O  
If you have subscribed to the Caller identification service, the screen  
will show the caller’s number during the call. The name will be dis-  
If you wish to know who is calling before you pick up, you can  
options).  
Each phonebook can contain 10 names.  
Names are listed in alphabetical order.  
P
S
8
W
Z
Q R  
7
X Y  
9
or  
and  
to select the  
person’s name  
0
Accessing and exiting the phonebook  
Changing a phonebook entry  
Example:  
To enter the name “Patrick“:  
Press  
or  
to access the phonebook. Press the same icon to  
Only the phone number can be changed.  
exit the phonebook.  
validation  
beep  
or  
and  
press  
press  
press  
press  
press  
press  
press  
once for the letter “P“  
Accessing and selecting phonebook files  
to select the  
to modify the  
old number  
once for the letter “A“  
person’s name  
once for the letter “T“  
or  
or  
and  
Deleting an entry from the phonebook  
three times for the letter “R“  
three times for the letter “I“  
three times for the letter “C“  
twice for the letter “K“  
to select a file  
validation  
beep  
or  
and  
to select the  
to delete  
the entry  
person’s name  
If you make a mistake, simply press  
to delete  
                       
USING THE ANSWERING MACHINE (TAM)  
USING THE LIST OF REDIAL NUMBERS AND INCOMING CALL LOG  
7
8
The answering machine is activated by default.  
You can record up to 6 minutes of top quality messages or 9 minutes of standard quality  
answering machine recording quality.)  
List of numbers to redial  
Pressing the following keys to access or exit the lists:  
is used to access the redial list - a list of the last 5 numbers called, from the latest to  
the oldest. Each new entry deletes the oldest entry. You can use this function to automatically  
redial a caller’s number.  
The key  
("answering machine" key) is located on the back of the handset.  
Activating/Deactivating the answering machine  
Accessing the list of last numbers dialled (redial list)  
validation  
Use the  
entries in the list).  
Use the same key to exit the list.  
key to access the list of last numbers dialled (you will hear a beep if there are no  
or  
beep  
activation  
deactivation  
This key is backlit. Press this key to listen to your messages.  
A blinking key indicates receipt of an unread message. Once you have listened to your messages,  
press this key again to quit the answering machine function.  
Consulting the list  
or  
previous  
redial  
next  
!
redial  
Calling a displayed number  
Accessing the answering machine  
or  
Press the  
key to access the machine. The number of messages, the day of the week and the time will  
to select a number  
be displayed. The telephone will vocally state the number of messages received and play  
the message(s) recorded.  
Deleting a number  
or  
to select a number  
Listening to messages on your answering machine  
or  
Entering a number into the phonebook  
previous  
message  
next  
message  
validation  
beep  
enter  
or  
or  
the name  
Deleting messages from your answering machine  
to select a number  
(1) press and hold  
(1) all messages are deleted  
If you lose your way,  
press and hold  
(2) short press  
(2) the current message is deleted  
to exit any mode (programming, phonebooks or lists)  
!
Listening to your recorded message  
Press the following keys to listen to the pre-recorded message:  
Call log  
The call log contains the last 10 external calls received, starting with the most recent. If you have  
subscribed to the Caller identification service (see Page 5), you will be able to store number or  
name in the log (according to the information provided by the network).  
Saving/Changing the recorded message  
You can personalise your recorded message. However, if you do so, you will be unable to retrieve the  
original message.  
Caller identification service:  
Subscription to your operator’s Caller identification service enables the caller’s name and number to be  
stored directly in the incoming call log if registered with your operator’s network.  
speak after  
the beep  
Recording an internal message  
Using this function, you can leave a local message for your family members.  
Accessing the log  
Use the  
key to access the log. Use the same key to exit the log.  
speak after  
the beep  
Consulting the log  
Call screening  
You will only be able to access the information shown on the screens below if you have subscribed to the  
Caller identification service.  
When the answering machine is active, callers can leave messages. If you wish to screen your calls,  
you can listen to the person leaving the message by pressing  
increase the volume. Press this key to deactivate the loudspeaker. To interrupt the message and take  
the call, press . Press the key again to deactivate this function.  
again to  
6 stars if  
unidentified call  
(**)  
(*)  
Remote control of the answering machine  
a name identified  
You can access to your answering machine via a simple telephone call.  
The 4-digit remote access “RC code“ is found on the bottom of the base station of the telephone. This  
a telephone  
number  
possibly an  
"envelope" icon  
if a message has  
been left.  
On a handset that has the  
key (or using a voice dial telephone):  
To remotely activate the answering machine  
dial your  
enter the RC code  
phone number  
the time and date  
of the call  
after 9 rings  
and a beep  
(*)  
activate  
(*) This function depends on the network.  
(**) Unlisted numbers, withheld caller id and calls from abroad.  
To remotely deactivate the answering machine  
dial your  
enter the RC code  
phone number  
Calling a number from the log  
during the outgoing  
message  
deactivate  
or  
To remotely access the answering machine  
to select a name  
or number  
1. During the outgoing message, press the  
2. Enter the remote access code.  
key.  
Deleting a number from the log  
3. The system will announce the number of messages received and read recorded messages. Use the  
telephone keys to consult your messages.  
validation  
beep  
or  
to select a name  
or number  
Remotely reading messages  
Once connected to your answering machine, use the following keys:  
Entering a number stored in a list into one of the phonebooks  
Key  
Function  
validation  
enter  
or  
or  
beep  
twice go to the beginning of the previous message  
go to the beginning of the next message and play it  
delete the message being read  
the name  
to select a name  
or number  
If an "envelope" icon is displayed (that means you have a vocal message), you  
can press the key on the back of the handset to listen to the message.  
4. Hang up to end the access session.  
!
                       
HOW TO PROGRAM YOUR PHONE  
PROGRAMMING OPTIONS (CONT’D)  
9
To access the programming icons, press the  
key.  
Melody programming options  
5 icons are displayed on the screen.  
Function  
number  
Programmable  
functions  
Select  
Default  
value  
Programming icons:  
- Answering machine settings  
- Volume and melody settings  
• on: programming mode (consultation)  
or during a modification  
1/4  
2/4  
3/4  
Selects melody volume  
+ (1) to ++++ (4)  
+++ (3)  
Disco  
1x  
2x  
Selects melody of handset (general)  
7 melodies proposed  
7 melodies proposed  
• off: normal mode  
- To register the handset with another base  
• flashing: options can be selected  
Selects melody of handset  
(Friends phonebook)  
Birdy  
- Other programming option settings  
- Earpiece volume settings  
3x  
4/4  
Selects melody of handset  
(Family phonebook)  
7 melodies proposed  
Starry  
To select one of the icons, use the key  
and  
and then validate your choice by pressing the  
key.  
Note: the sound volume is the same for all melodies.  
For instance: how to change the melody.  
Press the key, press once then press  
How to register the handset with another base station  
.
This option allows you to register the handset with another base station. You will need to  
switch the base station onto record mode before entering the code. To place a Kala 200  
base station in record mode, simply disconnect and re-connect the mains supply. The RC  
code is shown on the bottom of the base station.  
choice n°1  
within the  
melody menu  
out of 4.  
Use level 1/4 to select the melody volume. Scroll  
through the different volume settings using the  
keys. The default setting is "+++" (3).  
and  
Function  
number  
Programmable  
function  
Select  
Default  
value  
4 choices  
within this  
menu  
1/1  
Registers the handset  
RC Code(1)  
Bottom of  
the base  
Note: the screen will show the default or selected value. If registering an additional  
handset, you will need to enter the RC code (4-figure access code) shown on the  
(and the scroll arrows have disappeared).  
Settings programming options  
To go to level 2/4: change melody type, press the  
key.  
Function  
number  
Programmable  
functions  
Select  
Default  
value  
To select the “DISCO“ melody, press  
If you wish to select the “RAIN“ melody, press  
to choose the melody and press to vali-  
to validate.  
by default,  
name of  
1/5  
2/5  
3/5  
Enters number of different CLI(4)  
Enters the dial mode(5)  
Enters network type(6)  
List of CLI avalaible  
TONE, PULSE  
1
the melody  
1x  
2x  
Depends  
A
date.  
A (residential),  
B, C, D (PABX)  
3x  
4/5  
Enters callback type(7)  
(long/short flash)  
Inserts automatic pause(8)  
*** (short),  
Depends  
NO  
You can also select a melody specific to the Friends  
****** (long)  
phonebook  
Press  
from the 7 melodies available.  
when you have selected the melody.  
4x  
5/5  
NO, YES  
4. CLI or Caller identification service: the Caller identification service (Name and Number) is  
available only if you have subscribed to the service with an operator (according to availablility).  
5. Dial mode: this allows you to select either voice frequency dialling (faster dialling, access to opera-  
tor services) or digital dialling. The availability of this function depends on the country  
6. Network type: your telephone has a default configuration for public telephone lines (option A).  
You can choose between 3 other network types to adjust the sound qualities for a PABX/ISDN set-up.  
7. Flash type: the operation of some services accessed using the  
Forward, etc.) will depend on the flash setting (short/long) depending on your installaton type (ISDN,  
Public, PAXB).  
8. Automatic pause: this function allows you to insert a prefix before the telephone number.  
The melody will sound after the second ring. This func-  
tion is only available if you have subscribed to the  
operator’s Caller identification service.  
key (Call Waiting, Call  
You can select a specific melody for the Family phone-  
book  
from the 7 available. Press  
then  
once you have chosen the melody.  
Earpiece programming option  
Press  
to exit the programming options.  
!
Function  
number  
Programmable  
function  
Select  
Default  
value  
1/1  
Modifies earpiece volume  
1 to 4  
++ (2)  
PROGRAMMING OPTIONS  
10  
Other indirect programming options  
These options can be accessed using a combination of two keys, after pressing:  
Press  
to enter the programming options.  
Sequence  
of keys  
Programmable  
functions  
Select  
Default  
value  
Enter the following functions by pressing  
once or several times.  
Enter the programming options on page 9 for more details.  
+
Unregisters  
the handset  
Selects TAM(9)  
RC code(1)  
Bottom of  
the base  
- --> + <- --  
+
- --> (answering  
and recording mode),  
--->+<--- (answering only mode)  
Answering machine programming options  
Function Programmable  
Select  
List: 1 (Monday) to 7 (Sunday)  
Default  
value  
number  
functions  
9. Answering only and Answering & Recording mode: answering only mode carries an outgo-  
ing message but does not allow callers to leave messages. Answering & Recording mode allows callers to  
1/5  
2/5  
3/5  
Modifies the system day  
Modifies the system time  
1
leave messages after listening to the outgoing message. Use  
and  
to switch between modes.  
1x  
2x  
Type value (00:00 to 23:59)  
List: 2, 3, 4, 5, toll(2)  
00:00  
Toll(2)  
Selects number of rings  
before machine picks up  
3x  
4x  
4/5  
5/5  
Modifies remote control code(1)  
Type value (0000 to 9999)  
RC code(1)  
A
(to show a default)  
Modifies telephone answering  
machine recording quality  
List: ****A (top quality),  
B (standard quality)  
****  
Press  
to exit the programming options.  
!
1. RC code: 4-figure access code found on the bottom the base station that allows you to register an  
additional handset (see the user manual for the additional handset).  
2. Toll Saver: the Toll Saver allows you to check to see if you have any messages remotely without activating  
the telephone. If you have messages, the machine will activate after 3 rings. If not, the telephone will ring 5  
times, giving you time to hang up before the connection is made.  
3. Remote access code: you will be asked to give this code to access the answering machine remotely.  
By default, this is the RC code, though you can personalise it.  
                     
TROUBLESHOOTING  
11  
Error  
Beep  
Problem  
Solution  
Cause or causes  
Yes  
• No dialling tone when  
pressing the talk key.  
Check the connections and ensure you  
have used the telephone cable provided  
in the box.  
The base station is not properly  
connected to electricity or to the  
telephone sockets.  
-
Batteries are low (the insert battery  
icon symbol is displayed).  
icon not displayed or  
blinking.  
Register the handset to the base station  
The handset is out of range.  
Move closer to the base station.  
-
• When the handset is  
placed on the charging  
unit, no beep is heard.  
Take the handset off the base station and  
put it back again.  
The handset is not placed correctly  
on the base station charging unit.  
-
-
Clean them with a clean and dry cloth.  
Charging contacts are dirty.  
• Battery icon remains empty  
although the handset has  
charged for 24 hours.  
Please contact your PHILIPS dealer in order  
to purchase new rechargeable batteries  
Handset batteries are defective.  
-
-
• No symbol on the display.  
Batteries are low.  
• Answering machine icon  
is blinking on the display.  
Consult and delete messages to free  
sufficient memory.  
The memory of the answering  
machine is full.  
Yes  
• The answering machine  
has not recorded your  
outgoing message.  
Consult and delete messages to free  
sufficient memory.  
The memory of the answering  
machine is full.  
-
• The answering machine  
has stopped.  
Consult and delete messages to free  
sufficient memory.  
The memory of the answering  
machine is full.  
Yes  
• A phonebook entry has  
not been memorised.  
Delete some entries to free memory spaces.  
The phonebook you wish to use is  
full.  
-
-
-
-
• Bad audio quality (cracks,  
mute, echo, vibration,  
etc.).  
Try to plug the base station in another place.  
Base station plugged too near from  
other electrical appliance.  
or:  
Please change the network type.  
Base station installed in a room  
with thick walls.  
or:  
Move closer to the base station.  
You are using the handset too far  
from the base station.  
• The CLI does not work.  
Please select another CLI.  
The handset is out of range.  
Philips has designed this product to work on PSTN line and cannot guarantee the complete application on ISDN  
network.  
The KALA 200 VOX is compliant with operator’s analogue interface.  
The KALA 200 VOX can only be connected to the British telephone network.  
The geographical area in which the equipment may be used is shown on the label on the bottom of the base station.  
Product may only be used in this zone.  
YOUR PHILIPS WARRANTY  
DECLARATION OF CONFORMITY  
We, PHILIPS Consumer Communications  
Route d’Angers 72081  
Le Mans Cedex 9  
12  
13  
Dear customer,  
France  
Thank you for purchasing this Philips product which has been  
designed and manufactured to the highest quality standards.  
If, unfortunately, something should go wrong with this prod-  
uct Philips guarantees free of charge labour and replacement  
parts irrespective of the country where it is repaired during  
a period of 12 months from date of purchase (6 months for  
replacement/rechargeable batteries). This international  
Philips guarantee complements the existing national guaran-  
tee obligations to you of dealers and Philips in the country of  
purchase and does not affect your statutory rights a cus-  
tomer.  
PHILIPS SERVICE CENTRE  
FREEPOST (SCE10569)  
RUGBY  
Declare that the product Kala 200 Vox (BS 6533 + HS 6830) is in compliance with ANNEX III of the R&TTE-Directive 99/05/EC and then  
with the following essential requirements:  
Article 3.1 a : (protection of the health & the safety of the user) EN 60950 (92) Ed.2 + amendments 1,2 (93) ; 3 (95) ; 4 (97) and 11 (97)  
Article 3.1 b : (protection requirements with respect to electromagnetic compatibility) ETS 300 329 (97)  
Article 3.2 : (effective use of the radio spectrum) TBR6 (97)  
Warwickshire  
CV21 1BR  
NB: Philips recommend all parcels to be returned to the  
Philips Service Centre be submitted over the counter at your  
Post Office and a proof of postage requested.  
The presumption of conformity with the essential requirements regarding Council Directive 99/05/EC is ensured.  
Date:12/12/2000  
Le Mans  
Cordless Business Director  
Please note the Royal Mail insurance limit for lost/damage  
using the Freepost service is £26. Up to £250 insurance and  
next day delivery can be obtained via Royal Mail Special  
Delivery, however, the consumer will be responsible for this  
cost.*  
PHILIPS KALA: ENVIRONMENT AND SECURITY  
The Philips guarantee applies provided the product is han-  
dled properly for its intended use, in accordance with its  
operating instructions and upon presentation of the original  
invoice or cash receipt, indicating the date of purchase,  
dealer’s name and model and production number of the  
product.  
14  
• Methods of Transport within IRELAND:  
PHILIPS KALA 200  
Your telephone has all advantages of the latest technological advances which make it even simpler and easier to use.  
Please contact Philips Service Support , Dublin  
Safety information  
This equipment is not designed for making emergency telephone calls when the power fails. An alternative should be made  
available for access to emergency calls.  
IMPORTANT (for UK only):  
The Philips guarantee may not apply if:  
• The documents have been altered in any way or made  
illegible;  
• The model or production number on the product has been  
altered, deleted, removed or made illegible;  
• Repairs or product modifications and alterations have  
been executed by unauthorised service organisations or per-  
son;  
• Damage is caused by accidents including but not limited  
to lightning, water or fire, misuse or neglect.  
Please ensure the following are included when returning a  
genuinely faulty phone to the Philips Service Centre:  
- Name.  
The CE marking certifies compliance with technical regulations in accordance with the Directive 1999/5/EC for  
the safety of the user, electromagnetic perturbations and for radio spectrum.  
Power requirements  
- Return Delivery address.  
This product requires an electrical supply of 220-240 volts, alternating monophased current, excluding IT installations  
defined in standard EN 60-950.  
- Daytime contact number.  
- Proof of Purchase (copy)  
-
For Dect phones both handset and base have to be  
WARNING !  
returned.  
The electrical network is classified as dangerous according to criteria in the standard EN60-950. The only way to power  
down this product is by unplugging the power cable from the electrical outlet. Ensure the electrical outlet is located to  
the apparatus and is always easily accessible.  
- Accessories: power supply line cords.  
- A brief description of the assumed fault  
Despatch note (if your phone has previously been  
To be able to make calls in the event of a power cut, it is recommend that this telephone be used as a complement to anoth-  
er telephone which does not require mains power.  
-
Please note that the product is not defective under this guar-  
antee in the case where modifications become necessary in  
order for the product to comply with local or national tech-  
nical standards which apply in countries for which the prod-  
uct was not originally designed and/or manufactured.  
Therefore always check whether a product can be used in a  
specific country.  
exchanged).  
Telephone connection  
Failure to include all the necessary information will cause  
delays in servicing your phone.  
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard  
EN 60-950).  
Please allow 2-3 days from receipt at the service centre for  
your replacement/repaired product to be returned to you. If  
an out of warranty charge applies Philips shall contact you  
before the product is returned.  
Safety precautions  
Do not allow the handset to come into contact with water.  
Do not open the handset or the base station. This could expose you to high voltages. Contact our after-sales service for all  
repairs.  
In case your Philips product is not working correctly or is  
defective, please return your phone to the place of purchase  
or 6the Philips National Service Centre. In the event you  
require service whilst in another country a dealer address  
can be given to you by the Philips Consumer Help Desk in  
that country.  
Do not allow the charging contacts or the battery to come into contact with conductive materials such as keys, paper clips,  
rings, bracelets, etc.  
Philips shall pay for the return carriage on all in-warranty  
exchanges.  
Make sure you insert the batteries with their polarities in the correct position.  
Environmental care  
*Should you wish to return your products for service at your  
Your telephone has also benefited from the Philips EcoDesign program –Environmental Conscious Product Design – which  
considers the environmental impact of a product during its entire life cycle.  
Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries  
and old phone and where possible promote their recycling.  
own cost (via  
a
courier service or Royal Mail Special  
Delivery) please ensure the items are suitably packed for  
transport and sent to the following address:  
In order to avoid unnecessary inconvenience, we advise you  
to read the operating instructions carefully before contacting  
your dealer.  
Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate  
disposal of your eventual waste.  
Philips Service Centre  
1 Great Central Way  
Butlers Leap  
Battery:  
• Methods of Transport within the UK:  
* The crossed-out dustbin signifies that the battery should not be disposed of with general household waste.  
Please be aware whichever method of transport is chosen it  
is the consumers’ responsibility to package the faulty unit for  
return to a level which prohibits accidental damage. Philips  
is not responsible for damage/loss caused during carriage  
to the Service Centre.  
Freepost: Please write the following address onto your pack-  
age. This method of transport will take 2-3 working days to  
reach the Service Centre.  
Rugby  
Warwickshire  
CV21 3XH  
Packaging:  
The mobius loop symbol signifies the labeled packaging material is recyclable.  
The green point symbol signifies that a financial contribution has been made to the associated national  
packaging recovery and recycling system (e.g EcoEmballage in France).  
For Philips Service Support in UK, (incl. Channel Islands)  
please call 0870 900 9070.  
(Open during normal business hours, excluding National  
holidays and weekends).  
© 2000 - Philips Consumer Communications - Division of Philips France  
UK - 4311 256 07422 - Printed in Europe - All rights reserved  
       

Intel Computer Hardware Processor User Manual
JVC AV 21KJ1SNF User Manual
JVC AV 27WF36 User Manual
M Audio 192 User Manual
Motorola MD4160 Series User Manual
NEC MultiSync Soundbar 90 User Manual
Philips 14PT1356 User Manual
Philips 21PT2382 User Manual
Philips 32FL2884 User Manual1
Philips HTS3181X User Manual