Philips DVP5142 User Manual

DVD VIDEO PLAYER  
DVP5140  
DVP5142  
User manual  
Thank you for choosing Philips.  
Need help fast?  
Read your User’s Manual first for quick tips that make using  
your Philips product more enjoyable.  
If you have read your instructions and still need assistance,  
you may access our online help at www.philips.com/support  
001-45 DVP5140_Eng_02RC5  
1
09/10/06, 11:08 AM  
CAUTION  
VISIBLE AND INVISIBLE LASER  
RADIATIONWHEN OPEN.  
AVOID EXPOSURETO BEAM.  
ADVARSEL  
SYNLIG OG USYNLIG  
LASERSTRÅLINGVED ÅBNING  
UNDGÅ UDSÆTTELSE FOR STRÅLING  
VARNING  
SYNLIG OCH OSYNLIG  
LASERSTRÅLNING NÄR DENNA DEL  
ÄR ÖPPNAD BETRAKTA EJ STRÅLEN  
VARO!  
AVATTAESSA OLET ALTTIINA  
NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE  
LASER SÄTEILYLLE. ÄLÄ KATSO  
SÄTEESEEN  
VORSICHT  
GEFAHRVON SICHTBARER UND  
UNSICHTBARER LASERSTRAHLUNG  
BEI GEÖFFNETEM GEHÄUSE.  
ATTENTION  
RAYONNEMENT LASERVISIBLE ET  
INVISIBLE EN CAS D’OUVERTURE  
EXPOSITION DANGEREUSE AU  
FAISCEAU  
The apparatus shall not be exposed to dripping  
or splashing and that no objects filled with  
liquids, such as vases, shall be placed on  
apparatus.  
‘CONSUMERS SHOULD NOTETHAT NOT ALL  
HIGH DEFINITIONTELEVISION SETS ARE FULLY  
COMPATIBLEWITHTHIS PRODUCT AND MAY  
CAUSE ARTIFACTSTO BE DISPLAYED INTHE  
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE  
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED  
THATTHE USER SWITCHTHE CONNECTIONTO  
THE ‘STANDARD DEFINITION’ OUTPUT. IF  
THERE ARE QUESTIONS REGARDING OURTV  
SET COMPATIBILITYWITHTHIS MODEL 525p  
AND 625p DVD PLAYER, PLEASE CONTACT OUR  
CUSTOMER SERVICE CENTER.’  
Due to the inconsistency of disc formats  
provided by various disc manufacturers, your  
DVD system may require a playability  
enhancement or upgrade. As DVD technology  
advances, these enhancements will become  
common and will be easy to complete.  
software upgrade.  
001-45 DVP5140_Eng_02RC5  
3
09/10/06, 11:08 AM  
CAUTION  
Use of controls or adjustments or  
performance of procedures other  
than herein may result in hazardous  
radiation exposure or other unsafe  
operation.  
VAROITUS  
Muiden kuin tässä esitettyjen  
toimintojen säädön tai asetusten  
muutto saattaa altistaa vaaralliselle  
säteilylle tai muille vaarallisille  
toiminnoille.  
001-45 DVP5140_Eng_02RC5  
4
09/10/06, 11:08 AM  
Index  
English ------------------------------------------- 8  
Français --------------------------------------- 46  
Español ---------------------------------------- 83  
Deutsch --------------------------------------122  
Nederlands ----------------------------------160  
Manufactured under license from  
Dolby Laboratories, "Dolby"  
and the double-D symbol are  
trademarks of Dolby Laboratories.  
Windows Media and the Windows logo  
are trademarks, or registered  
trademarks of Microsoft Corporation  
in the United States and/or other  
countries.  
DivX Ultra Certified products: "DivX ",  
DivX Ultra Certified, and associated  
logos are trademarks of DivX , Inc. and  
are used under license.  
001-45 DVP5140_Eng_02RC5  
5
09/10/06, 11:08 AM  
General Information  
Environmental Information  
Laser safety  
All unnecessary packaging has been  
omitted.The packaging has been made  
easy to separate into two materials:  
cardboard (box, buffer) and polyethylene  
(bags, protective foam sheet).  
This unit employs a laser. Due to possible  
eye injury, only a qualified service person  
should remove the cover or attempt to  
service this device.  
NOTE:  
Your DVD player consists of materials  
which can be recycled and reused if  
disassembled by a specialised company.  
Please observe the local regulations  
regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
PICTURES SHOWN MAYBE  
DIFFERENT BETWEEN  
COUNTRIES.  
CAUTION  
(WARNING LOCATION: ONTHE  
BACKPLATE OFTHE SET)  
NEVER MAKE OR CHANGE  
CONNECTIONSWITHTHE  
POWER SWITCHED ON.  
Important Note:  
Due to the numerous versions of new  
CD-Audio copy protection or  
enhanced CD-Audio protection  
recently available on certain discs,  
Philips is unable to guarantee that  
this DVD Player is fully compatible  
with such new discs. Should you have  
difficulty playing any such CD-Audio  
discs, kindly refer them to your CD-  
Audio disc retailer.  
This product complies with the  
radio interference requirements of  
the European Community.  
Specifications are subject to change  
without notice.Trademarks are the  
property of Koninklijke Philips Electronics  
N.V. or their respective owners.  
This DVD player is in conformity  
with the EMC directive and low-  
voltage directive.  
For Customer Use:  
LASER  
Type  
Read carefully the information located at  
the rear of your DVDVIDEO player and  
enter below the Serial No. Retain this  
information for future reference.  
Semiconductor laser  
GaAlAs  
650 nm (DVD)  
780 nm (VCD/CD)  
7 mW (DVD)  
Wave length  
Output Power  
Model No. DVP 5140  
10 mW (VCD/CD)  
Serial No. _______________  
Beam divergence 60 degree  
001-45 DVP5140_Eng_02RC5  
6
09/10/06, 11:09 AM  
Language Code  
Abkhazian  
Afar  
Afrikaans  
Amharic  
6566  
6565  
6570  
6577  
6582  
7289  
6583  
6569  
6589  
6590  
7783  
6665  
6669  
6678  
6672  
6673  
7866  
6683  
6682  
6671  
7789  
6983  
6765  
6772  
6769  
Inupiaq  
Irish  
Íslenska  
Italiano  
Ivrit  
Japanese  
Javanese  
Kalaallisut  
Kannada  
Kashmiri  
Kazakh  
Kernewek  
Khmer  
7375  
7165  
7383  
7384  
7269  
7465  
7486  
7576  
7578  
7583  
7575  
7587  
7577  
8287  
7589  
7586  
7579  
Pushto  
8083  
8285  
8185  
8277  
8279  
8278  
8377  
8371  
8365  
8367  
8382  
8378  
8381  
8368  
8373  
8373  
8376  
8379  
8384  
7882  
8385  
7073  
8387  
8383  
8386  
8476  
8489  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8483  
8478  
8482  
8475  
8487  
8571  
8575  
8582  
8590  
8673  
8679  
8765  
6789  
8779  
8872  
8973  
8979  
9085  
Russian  
Quechua  
Raeto-Romance  
Romanian  
Rundi  
Samoan  
Sango  
Sanskrit  
Sardinian  
Serbian  
Shona  
Arabic  
Armenian  
Assamese  
Avestan  
Aymara  
Azerhaijani  
Bahasa Melayu  
Bashkir  
Belarusian  
Bengali  
Bihari  
Bislama  
Bokmål, Norwegian  
Bosanski  
Brezhoneg  
Bulgarian  
Burmese  
Castellano, Español  
Catalán  
Chamorro  
Chechen  
Chewa; Chichewa; Nyanja7889  
9072  
Chuang; Zhuang  
Church Slavic; Slavonic 6785  
Chuvash  
Corsican  
Česky  
Shqip  
Sindhi  
Kinyarwanda  
Kirghiz  
Komi  
Sinhalese  
Slovensky  
Slovenian  
Somali  
Sotho; Southern  
South Ndebele  
Sundanese  
Suomi  
Swahili  
Swati  
Svenska  
Tagalog  
Tahitian  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga (Tonga Islands)  
Tsonga  
Tswana  
Türkçe  
Turkmen  
Twi  
Uighur  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Walloon  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Korean  
Kuanyama; Kwanyama 7574  
Kurdish  
Lao  
Latina  
Latvian  
Letzeburgesch;  
Limburgan; Limburger 7673  
Lingala  
Lithuanian  
Luxembourgish;  
Macedonian  
Malagasy  
Magyar  
Malayalam  
Maltese  
Manx  
Maori  
Marathi  
Marshallese  
Moldavian  
Mongolian  
Nauru  
Navaho; Navajo  
Ndebele, North  
Ndebele, South  
Ndonga  
Nederlands  
Nepali  
Norsk  
Northern Sami  
North Ndebele  
Norwegian Nynorsk;  
Occitan; Provencal  
Old Bulgarian;Old Slavonic 6785  
Oriya  
Oromo  
Ossetian; Ossetic  
Pali  
Panjabi  
Persian  
Polski  
Português  
7585  
7679  
7665  
7686  
7666  
7678  
7684  
7666  
7775  
7771  
7285  
7776  
7784  
7186  
7773  
7782  
7772  
7779  
7778  
7865  
7886  
7868  
7882  
7871  
7876  
7869  
7879  
8369  
7868  
7878  
7967  
9065  
6786  
6779  
6783  
6865  
6869  
6890  
6978  
6979  
6984  
6985  
6976  
7079  
7082  
7089  
7074  
Dansk  
Deutsch  
Dzongkha  
English  
Esperanto  
Estonian  
Euskara  
ꢀꢁꢁꢂꢃꢄꢅꢆ  
Faroese  
Français  
Frysk  
Fijian  
Gaelic; Scottish Gaelic 7168  
Gallegan  
Georgian  
Gikuyu; Kikuyu  
Guarani  
Gujarati  
Hausa  
Herero  
Hindi  
Hiri Motu  
Hrwatski  
Ido  
7176  
7565  
7573  
7178  
7185  
7265  
7290  
7273  
7279  
6779  
7379  
7982  
7977  
7983  
8073  
8065  
7065  
8076  
8084  
Interlingua (International)7365  
Interlingue  
Inuktitut  
7365  
7385  
7
001-45 DVP5140_Eng_02RC5  
7
09/10/06, 11:09 AM  
Contents  
Language Code................................................... 7  
Disc Operations  
Playable Discs ................................................. 21  
Region Codes ................................................. 21  
Playing discs..................................................... 22  
Basic playback controls................................. 22  
Selecting various repeat/shuffle functions 23  
Repeat play mode ......................................... 23  
Repeating a section within a chapter/track .  
.......................................................................... 23  
Operations for video playback ................... 24  
Using the Disc Menu.................................... 24  
Zooming in ..................................................... 24  
Resuming playback from the last stopped  
point ................................................................ 24  
Slow motion................................................... 24  
Forward / Reverse Searching ..................... 24  
OSD (On-Screen Display) (DVD/VCD/  
SVCD) ........................................................25-26  
Using the OSD menu .................................. 25  
Title/Chapter/Track selection .................... 25  
Time Search ................................................... 25  
Audio/Subtitle................................................ 26  
Angle................................................................ 26  
Preview function ........................................... 26  
Special DVD Features ................................... 27  
Playing aTitle ................................................. 27  
Changing the Audio Language .................... 27  
Subtitles .......................................................... 27  
SpecialVCD & SVCD Features ................... 27  
Playback Control (PBC) .............................. 27  
Playing DivX® disc.......................................... 28  
Playing MP3/WMA/JPEG/Kodak Picture CD  
..................................................................... 29-30  
General Operation....................................... 29  
Playback selection ......................................... 29  
Zoom picture (JPEG) ................................... 29  
Playback with multi-angles (JPEG)............. 29  
Preview function ........................................... 30  
Playing MP3/WMA music and JPEG picture  
simultaneously ............................................... 30  
Introduction  
Supplied accessories ..................................... 10  
Cleaning discs ................................................. 10  
Setup ................................................................. 10  
Connections  
ConnectingTV.......................................... 11-12  
Using SCART jack......................................... 11  
Using CompositeVideo jacks (CVBS)...... 11  
Using ComponentVideo jacks (Pr PbY) . 12  
Using an accessory RF modulator ............ 12  
Connecting the power cord........................ 13  
Optional : Connecting to an Audio System .  
........................................................................... 14  
Stereo system has Dolby Pro Logic or Right  
/ Left Audio In jack ....................................... 14  
Optional: Connecting Digital AV Receiver ...  
........................................................................... 14  
Receiver has a PCM, Dolby Digital, or  
MPEG2 decoder............................................ 14  
Functional Overview  
Front and Rear Panels .................................. 15  
Remote Control ............................................ 16  
Getting Started  
Step 1: Inserting batteries into the  
Remote Control ............................................ 17  
Using the Remote Control to operate the  
Player ............................................................... 17  
Step 2: Setting up theTV ........................17-19  
Setting up Progressive Scan feature (for  
Progressive ScanTV only)........................... 18  
Selecting the colour system that  
corresponds to yourTV.............................. 19  
Step 3: Setting language preference ........... 20  
Setting the OSD Language.......................... 20  
Setting the Audio, Subtitle and Disc menu  
language .......................................................... 20  
8
001-45 DVP5140_Eng_02RC5  
8
09/10/06, 11:09 AM  
Contents  
DVD Menu Options  
General Setup menu ...............................31-32  
Locking/Unlocking the disc for viewing ... 31  
Dimming system’s display screen .............. 31  
Programming disc tracks.......................31-32  
OSD Language............................................... 32  
Sleep ................................................................ 32  
DivX® VOD registration code ................... 32  
Audio Setup Menu ...................................33-35  
Analog output................................................ 33  
Digital Audio Setup....................................... 33  
Sound Mode................................................... 34  
CD Upsampling ............................................. 34  
Night Mode - turning on/off....................... 35  
Video Setup Menu ...................................35-38  
TVType ........................................................... 35  
Setting theTV Display ................................. 36  
Progressive - turning on/off ........................ 36  
Picture Setting ............................................... 37  
Switching theYUV/RGB .............................. 38  
Preference Page........................................ 38-41  
Audio, Subtitle, Disc Menu.......................... 38  
Restricting playback by Parental Control.....  
......................................................................... 39  
PBC .................................................................. 40  
MP3/JPEG Menu - turning on/off............... 40  
Changing the Password ............................... 40  
Setting the DivX® Subtitle .......................... 41  
Restoring to original settings ..................... 41  
Troubleshooting ......................... 42–43  
Specifications ...................................... 44  
Glossary ......................................................................45  
9
001-45 DVP5140_Eng_02RC5  
9
09/10/06, 11:09 AM  
Introduction  
Supplied accessories  
Setup  
Finding a suitable location  
– Place the set on a flat, hard and stable  
surface. Do not place the set on a carpet.  
– Do not position the set on top of  
other equipment that might heat it up  
(e.g., receiver or amplifier).  
– Do not put anything under the set (e.g.,  
CDs, magazines).  
– Install this system near the AC outlet  
and where the AC power plug can be  
reached easily.  
Remote Control  
and  
two AAA batteries  
Space for ventilation  
– Place the apparatus in a location with  
adequate ventilation to prevent internal  
heat build up. Allow at least 10 cm (4.0”)  
clearance from the rear and the top of  
the set and 5cm (2.0”) from the left and  
right to prevent overheating.  
Cleaning discs  
To clean a disc, use a micro fibre cleaning  
cloth and wipe the disc from the center  
to the edge in a straight line.  
5cm (2.0")  
CAUTION!  
Do not use solvents such as benzene,  
thinner, commercially available cleaners, or  
anti-static sprays intended for discs.  
10cm (4.0")  
5cm (2.0")  
10cm (4.0")  
Since the optical unit (laser) of the DVD  
system operates at a higher power than  
regular DVD or CD players, cleaning CDs  
intended for DVD or CD players may  
damage the optical unit (laser).Therefore,  
refrain from using a cleaning CD.  
Avoid high temperatures, moisture,  
water and dust  
– Apparatus shall not be exposed to  
dripping or splashing.  
– Do not place any sources of danger on  
the apparatus (e.g., liquid filled objects,  
lighted candles).  
10  
001-45 DVP5140_Eng_02RC5  
10  
09/10/06, 11:09 AM  
Connections  
ConnectingTV  
S-VIDEO  
IN  
AUDIO  
IN  
TV IN  
S-VIDEO  
IN  
AUDIO  
IN  
VIDEO IN  
TV IN  
S-VIDEO  
IN  
AUDIO  
IN  
T
V
I
N
VIDEO IN  
V
I
D
E
O
I
N
S-VIDEO  
IN  
AUDIO  
IN  
T
V
I
N
V
I
D
E
O
I
N
1
2
1
IMPORTANT!  
Using CompositeVideo jacks  
(CVBS)  
You only need to make one video  
connection from the following  
options, depending on the  
capabilities of yourTV system.  
– Connect the DVD system directly  
to theTV.  
– A SCART connection will let you  
use features both Audio andVideo  
on the DVD Player.  
1 Use the composite video cable (yellow) to  
connect the DVD Player’s CVBS (VIDEO)  
jack to the video input jack (or labeled as  
A/V In,Video In, Composite or Baseband)  
on theTV (cable not supplied).  
2 To hear the sound of this DVD Player  
through yourTV, use the audio cables  
(white/red) to connect AUDIO OUT (L/  
R) jacks of the DVD Player to the  
corresponding AUDIO IN jacks on theTV  
(cable not supplied).  
Using SCART jack  
G Use the SCART cable (black) to connect  
the DVD Player’s SCART jack (TV OUT)  
to the corresponding Scart input jacks on  
theTV (cable not supplied).  
Helpful Hint:  
Ensure that the “TV” indication on  
SCART cable is connected to theTV  
set and “DVD” indication on SCART  
cable is connected to the DVD Player.  
11  
001-45 DVP5140_Eng_02RC5  
11  
09/10/06, 11:09 AM  
Connections  
RF coaxial cable toTV  
2
COMPONENT  
VIDEO IN  
Back of RF Modulator  
S-VIDEO  
V
U
(Pr/Cr)  
AUDIO  
IN  
(example only)  
(Pb/Cb)  
INT IN  
TO TV  
AUDIO IN  
VIDEO  
IN  
VIDEO IN  
R
L
COMPONENT  
VIDEO IN  
Y
S-VIDEO  
IN  
V
U
(Pr/Cr)  
AUDIO  
IN  
(Pb/Cb)  
V
I
D
E
O
I
N
Y
CH3 CH4  
Antenna or  
CableTV signal  
1
2
1
IMPORTANT!  
IMPORTANT!  
– The progressive scan video  
quality is only possible when usingY  
Pb Pr and a progressive scanTV is  
required.  
– If yourTV only has a single  
Antenna In jack (or labeled as 75  
ohm or RF In,) you will need an RF  
modulator in order to view the DVD  
playback on theTV. See your  
electronics retailer or contact  
Philips for details on RF modulator  
availability and operations.  
Using ComponentVideo jacks  
(Y Pb Pr)  
1 Use the component video cables (red/  
blue/green) to connect the DVD system’s  
Y Pb Pr jacks to the corresponding  
Using an accessory RF modulator  
Component video input jacks (or labeled  
asY Pb Pr) on theTV (cable not supplied).  
1 Use the composite video cable (yellow) to  
connect the DVD Player’s CVBS jack to  
the video input jack on the RF modulator.  
2 To hear the sound of this DVD Player  
through yourTV, use the audio cables  
(white/red) to connect AUDIO OUT (L/  
R) jacks of the DVD Player to the  
corresponding AUDIO IN jacks on theTV  
(cable not supplied).  
2 Use the RF coaxial cable (not supplied) to  
connect the RF modulator to yourTV’s  
RF jack.  
3 Proceed to page 18 for detailed  
Progressive Scan set up.  
12  
001-45 DVP5140_Eng_02RC5  
12  
09/10/06, 11:09 AM  
Connections  
Connecting the power cord  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
V
U
Y
(Pr/Cr)  
AUDIO  
OUT  
~
AC MAINS  
(Pb/Cb)  
VIDEO IN  
After everything is connected  
properly, plug in the AC power cord  
to the power outlet.  
Never make or change any connections  
with the power switched on.  
When no disc is loaded, press  
STANDBY ON on the DVD Player  
front panel,  
NO DISC” may appear on the  
display panel.  
NO DISC  
13  
001-45 DVP5140_Eng_02RC5  
13  
09/10/06, 11:09 AM  
Connections  
Optional: Connecting to an  
Audio System  
Optional: Connecting Digital AV  
Receiver  
STEREO  
AV Receiver  
AUDIO  
IN  
AUDIO  
IN  
DIGITAL  
DIGITAL  
Stereo system has Dolby Pro Logic  
or Right / Left Audio In jack  
Receiver has a PCM, Dolby Digital,  
or MPEG2 decoder  
1 Select one of the video connections  
(CVBSVIDEO IN, SCART or  
1 Select one of the video connections  
(CVBSVIDEO IN, SCART or  
COMPONENTVIDEO IN) depending on  
the options available on yourTV.  
COMPONENTVIDEO IN) depending on  
the options available on yourTV.  
2 Connect the COAXIAL jack of the DVD  
Player to the corresponding Digital Audio  
In jack on your Receiver (cable not  
supplied).  
2 Use the audio cables (white/red) to  
connect AUDIO OUT (L/R) jacks of  
the DVD Player to the corresponding  
AUDIO IN jacks on the stereo system  
(cable not supplied).  
3 Set the DVD Player’s Digital Output to  
PCM-ONLY or ALL depending on the  
capabilities of your Receiver (see page 33  
“Digital Output”).  
Helpful Hints:  
If the audio format of the Digital Output  
does not match the capabilities of your  
receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
14  
001-45 DVP5140_Eng_02RC5  
14  
09/10/06, 11:09 AM  
Functional Overview  
Front and Rear Panels  
9 STOP  
STANDBY-ON B  
– Stops playback  
Turns the player on or switches it to  
standby mode  
2;PLAY/PAUSE  
– Starts or pauses playback  
Disc tray  
SMART PICTURE  
To toggle between Standard,Vivid, Cool  
and Personal  
OPEN/CLOSE /  
Opens or closes the disc tray  
IR Sensor  
– Point the remote control towards this  
sensor  
Display  
Shows information about the current  
status of the DVD Player  
TV OUT  
– Connect to Scart input of a TV  
Mains (AC Power Cord)  
Audio Out (Left/Right)  
– Connect to AUDIO inputs of an  
amplifier, receiver or stereo system  
Connect to a standard AC outlet  
CVBS (VIDEO Out)  
Connect to CVBSVideo input of a TV  
COAXIAL (Digital audio out)  
– Connect to coaxial AUDIO input of a  
digital audio equipment  
YPbPr (Component Video Out)  
Connect toYPbPr input of a TV  
Caution: Do not touch the inner pins of the jacks on the rear panel.  
Electrostatic discharge may cause permanent damage to the unit.  
15  
001-45 DVP5140_Eng_02RC5  
15  
09/10/06, 11:09 AM  
Functional Overview  
Remote Control  
B
DISC MENU  
– Enters or exits the disc contents  
menu  
Turns the player on or switches  
it to standby mode  
– Switches on or off the playback  
control mode (forVCD version  
2.0 only)  
DISPLAY  
Displays information on TV  
screen during playback  
RETURN / TITLE  
To go back to previous menu /  
show title menu  
1 2  
Cursor buttons for moving to  
the left or right, do a forward/  
reverse search  
PREV ( ¡ )  
– Skips to the previous title/chapter/  
track  
3 4  
Cursor buttons for moving up/  
down, do a slow forward/  
backward  
NEXT ( )  
– Skips to the next title/chapter/  
track  
OK  
Confirms an entry or selection  
STOP ( 9 )  
SETUP  
– Stops playback  
Enters or exits system setup  
menu.  
PLAY/PAUSE ( 2; )  
– Starts or pauses playback  
Alphanumeric keypad 0-9  
MUTE ( H)  
– Disables or enables sound output  
Selects numbered items in a  
menu  
AUDIO  
SUBTITLE  
– Selects a DVD subtitle language  
Selects an audio language  
(DVD/VCD) or audio channels.  
ZOOM  
– Enlarge a picture on the TV  
screen  
REPEAT  
– Selects various repeat mode  
REPEAT A-B  
– Repeats playback a specific section  
on a disc  
Helpful Hint:  
Press “STOP” for about 2 seconds to  
OPEN or CLOSE disc tray.  
16  
001-45 DVP5140_Eng_02RC5  
16  
09/10/06, 11:09 AM  
Getting Started  
Step 2: Setting up theTV  
Step 1: Inserting batteries into  
the Remote Control  
IMPORTANT!  
Make sure you have completed all  
the necessary connections. (See  
pages 11-12 ConnectingTV).  
1 Turn on theTV and set to the correct  
video-in channel. You should see the DVD  
background screen on theTV.  
2 Usually these channels are between the  
lowest and highest channels and may be  
called FRONT,A/V IN, orVIDEO. See your  
TV manual for more details.  
1 Open the battery compartment.  
Or, you may go to channel 1 on your  
TV, then press the Channel down button  
repeatedly until you see theVideo In  
channel.  
Or, theTV Remote Control may have a  
button or switch that chooses different  
video modes.  
2 Insert two batteries type R03 or AAA,  
following the indications (+-) inside  
the compartment.  
3 Close the cover.  
Using the Remote Control to  
operate the Player  
Or, set theTV to channel 3 or 4 if you  
are using an RF modulator.  
1 Aim the Remote Control  
directly at the remote  
sensor (IR) on the front  
panel.  
3 If you are using external equipment, (eg.  
audio system or receiver), turn it on and  
select the appropriate input source for  
the DVD player output. Refer to the  
equipment owner’s manual for detail.  
2 Do not put any objects  
between the Remote  
Control and the DVD  
Player while operating the  
DVD Player.  
CAUTION!  
Remove batteries if they are  
exhausted or if the Remote Control  
is not being used for a long time.  
Do not use old and new or  
different types of batteries in  
combination.  
Batteries contain chemical  
substances, so they should be  
disposed properly.  
17  
001-45 DVP5140_Eng_02RC5  
17  
09/10/06, 11:09 AM  
Getting Started  
Setting up Progressive Scan feature  
(for Progressive ScanTV only)  
ACTIVATING PROGRESSIVE SCAN:  
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.  
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.  
3. IF THERE IS A DISTORTED PICTURE, WAIT  
15 SECONDS FOR AUTO RECOVERY.  
The progressive scan display twice the  
number of frames per seconds than  
interlaced scanning (ordinary normalTV  
system).With nearly double the number  
of lines, progressive scan offers higher  
picture resolution and quality.  
Cancel  
OK  
OK  
9 Press 1 to highlight  
in the menu  
and press OK to confirm.  
There will be a distorted picture on  
yourTV at this state until you turn  
on the progressive scan mode on  
yourTV.  
IMPORTANT!  
Before enabling the progressive scan  
feature, you must ensure:  
1)YourTV can accept progressive signals,  
a progressive scanTV is required.  
2)You have connected the DVD player to  
yourTV usingY Pb Pr (see page 12.)  
0 Turn on yourTV progressive scan mode  
(refer to yourTV user manual.)  
The below menu appears on theTV.  
1 Turn on yourTV.  
CONFIRM AGAIN TO USE PROGRESSIVE  
SCAN. IF PICTURE IS GOOD,  
2 Turn off yourTV progressive scan mode  
or turn on interlaced mode (refer to your  
TV user manual.)  
PRESS OK BUTTON ON REMOTE.  
Cancel  
OK  
3 Press POWER (B) on the remote  
OK  
! Press 1 to highlight  
in the menu  
control to turn on the DVD player.  
and press OK to confirm.  
The set up is complete now and you  
can start enjoy the high quality picture.  
4 Select the correctVideo Input channel.  
(See page 17).  
The DVD background screen appears  
on theTV.  
To deactivate Progressive manually:  
G Wait for 15 seconds for auto recovery.  
5 Press SETUP.  
OR  
6 Press 2to select {VIDEO SETUP PAGE}.  
1 Press OPEN CLOSE 0 on the DVD  
player to open the disc tray.  
- - Video Setup Page - -  
TV Type  
2 Press numeric keypad 1on the  
remote control for few seconds.  
The DVD background screen appears  
on theTV.  
TV Display  
Progressive  
Picture Setting  
Component  
On  
Off  
Helpful Hint:  
Set Progressive TV Mode  
There are some progressive scanTV and  
High-DefinitionTV sets that are not fully  
compatible with this DVD system, resulting in  
the unnatural picture when playing back a  
DVDVIDEO disc in the progressive scan  
mode. In such a case, turn off the  
7 Select {COMPONENT} to {YUV}, then  
OK to confirm.  
8 Select {PROGRESSIVE} to {ON}, then OK  
to confirm.  
The instruction menu appears on the  
TV.  
progressive scan feature on both the DVD  
player and yourTV set.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
18  
001-45 DVP5140_Eng_02RC5  
18  
09/10/06, 11:09 AM  
Getting Started  
5 Select an item and press OK.  
Selecting the colour system that  
corresponds to yourTV  
Follow the instructions shown on the  
TV to confirm the selection (if any).  
This DVD Player is compatible with both  
NTSC and PAL. In order for a DVD disc  
to play on this Player, the colour system of  
the Disc, theTV and the DVD Player  
should match.  
Helpful Hints:  
Before changing the currentTV  
Standard setting, ensure that yourTV  
supports the ‘selectedTVType’ system.  
If there is no proper picture on  
yourTV, wait for 15 seconds for auto  
recovery.  
- - Video Setup Page - -  
TV Type  
PAL  
TV Display  
Progressive  
Picture Setting  
Component  
Multi  
NTSC  
CHANGING PAL TO NTSC:  
1. ENSURE THAT YOUR TV SUPPORTS  
NTSC STANDARD.  
2. IF THERE IS A DISTORTED PICTURE  
DISPLAYED ON THE TV, WAIT 15  
SECONDS FOR AUTO RECOVERY.  
OK  
CANCEL  
CANCEL  
NTSC TV  
CONFIRM AGAIN TO USE NEW TV  
TYPE SETTING.  
1 Press SETUP.  
OK  
2 Press 2to select {VIDEO SETUP PAGE}.  
3 Press 3 4 to highlight {TVTYPE}, then  
To reset to defaultTV colour system  
manually:  
press 2.  
4 Press 3 4 to highlight one of the options  
G Wait for 15 seconds for auto recovery.  
below:  
OR  
PAL – Select this if the connectedTV is  
PAL system. It will change the video signal  
of a NTSC disc and output in PAL format.  
1 Press OPEN CLOSE 0 on the DVD  
player to open the disc tray.  
2 Press numeric keypad 3on the  
remote control for few seconds.  
The DVD background screen appears  
on theTV.  
NTSC – Select this if the connectedTV  
is NTSC system. It will change the video  
signal of a PAL disc and output in NTSC  
format.  
Multi – Select this if the connectedTV is  
compatible with both NTSC and PAL  
(multi-system). The output format will be  
in accordance with the video signal of the  
disc.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
19  
001-45 DVP5140_Eng_02RC5  
19  
09/10/06, 11:09 AM  
Getting Started  
Step 3: Setting language  
preference  
Setting the Audio, Subtitle and Disc  
menu language  
You can choose your own preferred  
language or soundtrack from audio,  
subtitles and disc menu languages. If the  
language selected is not available on the  
disc, the disc’s default language will be  
used instead.  
The language options are different  
depending on your country or region. It  
may not correspond to the illustrations  
shown on the user manual.  
Setting the OSD Language  
The On-screen language for the system  
menu will remain as you set it, regardless  
of various disc languages.  
- - Preference Page - -  
Audio  
English  
Chinese  
French  
Subtitle  
Disc Menu  
Parental  
PBC  
Spanish  
Portuguese  
Polish  
- - General Setup Page - -  
Disc Lock  
Mp3 / Jpeg Nav  
Password  
Display Dim  
Programme  
Italian  
OSD Language  
Sleep  
ENGLISH  
Set Preference To English  
FRANÇAIS  
DEUTSCH  
DIVX(R) Vod Code  
NEDERLANDS  
1 Press STOP twice then, press SETUP.  
Set OSD Language English  
2 Press 2to select {PREFERENCE PAGE}.  
3 Press 34 to highlight one of the options  
below at a time, then press 2.  
– ‘Audio’ (disc’s soundtrack)  
– ‘Subtitle’ (disc’s subtitles)  
1 Press SETUP.  
2 Press 2to select {GENERAL SETUP  
PAGE}.  
– ‘Disc Menu’ (disc’s menu)  
3 Press 3 4 to highlight {OSD  
4 Press 34 to select a language and press  
LANGUAGE}, then press 2.  
OK.  
4 Press 34 to select a language and press  
OK.  
If the language you want is not in the  
list, then select {OTHERS},  
then use the numeric keypad (0-9) on  
the remote to enter the 4-digit language  
code ‘XXXX’ (see page 7 “Language  
Code”) and press OK.  
5 Repeat steps 3~4 for other language  
settings.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
20  
001-45 DVP5140_Eng_02RC5  
20  
09/10/06, 11:09 AM  
Disc Operations  
IMPORTANT!  
Region Codes  
If the inhibit icon (ø) appears on  
theTV screen when a button is  
pressed, it means the function is not  
available on the current disc or at  
the current time.  
Depending on the DVD orVIDEO  
CD, some operations may be  
different or restricted.  
This DVD player is designed to support  
the Region Management System. Check  
the regional code number on the disc  
package. If the number does not match  
the player’s region number (see table  
below), the player may be unable to  
playback the disc.  
Do not push on the disc tray or  
put any objects other than disc on  
the disc tray. Doing so may cause  
the disc player malfunction.  
Helpful Hints:  
It may not be possible to play CD-R/RW  
or DVD-R/RW in all cases due to the type of  
disc or condition of the recording.  
If you are having trouble playing a  
certain disc, remove the disc and try a  
different one. Improper formatted disc will  
not play on this DVD player.  
Playable Discs  
Your DVD Player will play:  
– DigitalVideo Discs (DVDs)  
– Video CDs (VCDs)  
– SuperVideo CDs (SVCDs)  
– DigitalVideo Discs +  
Recordable[Rewritable] (DVD+R[W])  
– Compact Discs (CDs)  
– MP3 discs, picture (Kodak, JPEG) files on  
CD-R(W).  
– JPEG/ISO 9660 format  
– Maximum 30 characters display.  
– Supported sampling frequencies :  
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)  
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)  
– Supported Bit-rates : 32~256 kbps  
(MPEG-1), 8~160 kbps (MPEG-2)  
variable bitrates  
Discs that can  
be played  
Region  
U.S.A. and  
(Example)  
ALL  
ALL  
ALL  
ALL  
1
2
Canada regions  
U.K and  
Europe regions  
Asia Pacific,Taiwan,  
Korea  
3
4
Australia, New  
Zealand, Latin America  
Russia and India regions  
ALL  
ALL  
5
6
– WMA files on CD-R(W).  
– Supported Bit-rates : 32~192 kbps  
– DivX® disc on CD-R[W]/DVD+R[W]:  
– DivX® 3.11, 4.x, 5.x and 6.x  
– Q-pel accurate motion compensation  
– Global Motion Compensation (GMC)  
playback  
China, Calcos Islands,  
Walls and Futuna Islands  
– DivX® Ultra on CD-R[W]/DVD R[W]:  
TIPS:  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
21  
001-45 DVP5140_Eng_02RC5  
21  
09/10/06, 11:09 AM  
Disc Operations  
Basic playback controls  
Playing discs  
Unless otherwise stated, all operations  
described are based on Remote Control  
use.  
1 Connect the power cords of the DVD  
Player andTV (and any optional stereo or  
AV receiver) to a power outlet.  
2 Turn on theTV power and set to the  
correctVideo In channel. (See page 17  
“Setting up theTV”).  
Pausing playback  
1 During playback, press PLAY/PAUSE 2;  
to pause playback and display a still  
picture.  
3 Press STANDBY-ON to turn on the  
DVD player.  
Sound will be muted.  
The DVD background screen appears  
on theTV.  
2 To resume normal playback, press  
PLAY/PAUSE 2;again.  
4 Press OPEN/CLOSE 0 on the front of  
the DVD player.  
Selecting track/chapter  
G You can also hold down the STOP Ç  
button on the remote control to open  
and close the disc tray.  
G Press PREV ¡/ NEXT to go to the  
previous or next track/chapter.  
G In STOP mode, press DISPLAY to  
display the disc information text line for  
title/chapter/track (example - 00/08).  
5 Place a disc into the disc tray with the  
lable facing up, then press OPEN/CLOSE  
0.  
G Use alphanumeric keypad (0-9) to  
enter valid title/chapter/track number,  
then press OK.  
For double-sided discs, load the side  
you want to play facing up.  
The playback skips to the selected  
title/chapter/track.  
6 Playback will start automatically. If not  
press PLAY/PAUSE 2;.  
If a disc menu appears on theTV, see  
page 24 “Using the Disc Menu”.  
If the disc is locked by parental control,  
you must enter your six-digit password.  
(See page 39).  
Stopping playback  
G Press STOPÇ.  
Helpful hints:  
Screen saver will start automatically if  
G For more playback features, see pages 22–  
the disc playback is stopped/paused for 5  
minutes.  
27.  
The player will automatically switch to  
Power Standby mode if you do not press any  
buttons for 15 minutes after the disc has  
stopped playing.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
22  
001-45 DVP5140_Eng_02RC5  
22  
09/10/06, 11:09 AM  
Disc Operations  
For JPEG, DivX®  
Selecting various repeat/shuffle  
functions  
In STOP mode,  
– Repeat One (currently playing file)  
– Repeat Folder (all files in selected folder)  
– Folder (playing all files in one folder once)  
– Shuffle (all files in current folder at random  
playback)  
Repeat play mode  
The repeat play options vary depending  
on the disc type.  
– Single (currently playing file once)  
1 While playing a disc, press REPEAT  
continuously to choose a repeat options.  
In PLAY mode,  
– Repeat One (currently playing file)  
– Repeat All (playing all files in one disc)  
– Repeat Off (cancel)  
– Shuffle (all files in current folder at random  
playback)  
For DVD  
– Chapter (currently playing chapter)  
– Title (currently playing title)  
– All (entire disc)  
– Shuffle (random playback)  
– Off (cancel)  
– Single (currently playing file once)  
2 To cancel repeat playback, press  
ForVideo CD,Audio CD  
Track (currently playing track)  
– All (entire disc)  
– Shuffle (random playback)  
– Off (cancel)  
STOPÇ.  
Helpful Hint:  
ForVCD, repeat playback is not possible  
if the PBC mode is switched on.  
For MP3  
Repeating a section within a  
chapter/track  
– Repeat One (currently playing file)  
– Repeat Folder (all files in selected folder)  
– Folder (playing all files in one folder once)  
– Shuffle (all files in current folder at random  
playback)  
1 While playing a disc, press REPEAT A-B  
at your chosen starting point.  
2 Press REPEAT A-B again at your chosen  
end point.  
– Single (currently playing file once)  
The section A and B can be set only  
within the same chapter/track.  
The section will now repeat  
continuously.  
3 To exit the sequence, press REPEAT  
A-B.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
23  
001-45 DVP5140_Eng_02RC5  
23  
09/10/06, 11:09 AM  
Disc Operations  
Operations for video playback  
(DVD/VCD/SVCD)  
Resuming playback from the last  
stopped point  
Resume playback of the last 5 discs is  
possible, even if the disc was ejected or  
the power switched off.  
Using the Disc Menu  
Depending on the disc, a menu may  
appear on theTV screen once you load in  
the disc.  
G Load one of the last 5 discs.  
LOADING” appears.  
G During loading mode, press PLAY/  
PAUSE 2;and the disc will be played  
back from the last point.  
To select a playback feature or item  
G Use 1234keys or numeric keypad  
(0-9) on the remote, then press OK to  
start playback.  
To cancel resume mode  
G In stop mode, press STOP 9again.  
To access or remove the menu  
G Press DISC MENU on the remote.  
Helpful Hint:  
This function is not possible on CD/MP3 disc.  
Slow Motion  
Zooming in  
This function allows you to enlarge the  
picture on theTV screen and to pan  
through the enlarged picture.  
1 Press 34during playback to select the  
required speed: 1/2, 1/4, 1/8 or 1/16  
(forward {DVD/SVCD/VCD} or backward  
{DVD}).  
1 During playback, press ZOOM  
repeatedly to display the picture with  
different scales.  
Sound will be muted.  
2 To return to normal speed, press  
PLAY/PAUSE 2;.  
Use 1234keys to pan through the  
enlarged picture.  
Playback will continue.  
Forward / Reverse Searching  
2 Press ZOOM repeatedly to return to  
1 Press 12during playback to select the  
required speed: 2X, 4X, 8X, 16X or 32X  
(backward or forward).  
the original size.  
Sound will be muted (DVD/VCD) or  
intermittent (CD).  
2 To return to normal speed, press PLAY/  
PAUSE 2;.  
TIPS: The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
24  
001-45 DVP5140_Eng_02RC5  
24  
09/10/06, 11:09 AM  
Disc Operations  
OSD (On-Screen Display) (DVD/  
VCD/SVCD)  
Time Search  
1 Press 34to highlight {Time Disp.} (Time  
Display), then press 2to access.  
The following display types appears on  
theTV, depending on the disc in the  
player.  
Using the OSD menu  
OSD menu shows the disc playback  
information (for example, title or chapter  
number, elapsed playing time, audio/  
subtitle language), a number of operations  
can be done without interrupting disc  
playback.  
For DVD discs:  
TT Elapsed - elapsed playing time of  
currentTitle;  
TT Remain - remaining playing time of  
currentTitle;  
CH Elapsed - elapsed playing time of  
current Chapter;  
CH Remain - remaining playing time of  
current Chapter;  
G During playback, press DISPLAY.  
A list of available disc information  
appears on theTV screen.  
Menu  
Title  
01/01  
09/12  
2CH  
Off  
Chapter  
Audio  
Subtitle  
Chinese  
(DVD)  
(VCD)  
ForVCD/SVCD discs:  
Total Elapsed - elapsed playing time of  
current Disc;  
Total Remain - remaining playing time of  
current Disc;  
Single Elapsed - elapsed playing time of  
currentTrack;  
Single Remain - remaining playing time of  
currentTrack;  
Bitrate 61  
Title Remain 0:48:59  
Menu  
Track  
01/01  
Disc Time 0:48:53  
Track Time 0:48:53  
Repeat AB Repeat Off  
Bitrate 71  
Total Elapsed 0:01:32  
Title/Chapter/Track selection  
2 Press 34to highlight {TTTime} / {CH  
Time} / {DiscTime} or {TrackTime}, then  
press 2to access.  
1 Press 34to highlight {Title} / {Chapter}  
or {Track}, then press 2to access.  
3 Use the numeric keypad (0-9) to input  
2 Use the numeric keypad (0-9) to enter  
the valid time (e.g. 0:34:27).  
a valid number (e.g. 04/05).  
4 Press OK to confirm.  
3 Press OK to confirm.  
The playback skips to the selected  
title/chapter/track.  
The playback skips to the chosen time.  
TIPS: The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
25  
001-45 DVP5140_Eng_02RC5  
25  
09/10/06, 11:09 AM  
Disc Operations  
Audio/Subtitle  
Preview Function  
1 Press 34to highlight {Audio} or  
{Subtitle}, then press 2to access.  
Audio or Subtitle menu appears on the  
TV.  
The preview function allows you to  
reduce the picture of 6 tracks enough to  
display in a full screen.  
1 Press 34to highlight {Preview} , then  
press 2to access.  
2 Press 34to select one language, then  
press OK to confirm.  
The preview menu appears on theTV  
screen.  
Current audio or subtitle language will  
be changed to the selected language.  
Select Digest Type:  
Title Digest  
Select Digest Type:  
Track Digest  
Chapter Digest  
Title Interval  
Disc Interval  
Angle  
Track Interval  
Chapter Interval  
1 Press 34to highlight {Angle}, then press  
(DVD example)  
(Video CD example)  
2to access.  
2 Use the numeric keypad (0-9) to key in  
2 Press 3 4 to select the PREVIEW type,  
then press OK.  
a valid number.  
The picture of each segment will  
appear on the screen.  
3 Press OK to confirm.  
Playback will go to the selected angle.  
01  
04  
02  
05  
03  
06  
A
D
B
E
C
F
(example for 6 thumbnail pictures display)  
3 Press 3 4 1 2 to select a track or input  
your selected track number using the  
numeric keypad (0-9), then press OK.  
Playback will start automatically on the  
selected track.  
TIPS: The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
26  
001-45 DVP5140_Eng_02RC5  
26  
09/10/06, 11:09 AM  
Disc Operations  
Special DVD Features  
Playing aTitle  
SpecialVCD & SVCD Features  
Playback Control (PBC)  
1 Press DISC MENU.  
The disc title menu appears on theTV  
screen.  
ForVCD with Playback Control (PBC)  
feature (version 2.0 only)  
G Press DISC MENU to toggle between  
‘PBC ON’ and ‘PBC OFF’.  
2 Use 3 4 1 2 keys or numeric keypad  
(0-9) to select a play option.  
If you select ‘PBC ON’, the disc menu  
(if available) will appear on theTV.  
Use the PREV ¡/ NEXT or the  
numeric keypad (0-9) to select a play  
option.  
3 Press OK key to confirm.  
Changing the Audio Language  
For DVD  
G During playback, pressing RETURN/  
TITLE will return to the menu screen (if  
PBC is on).  
G Press AUDIO repeatedly to select  
different audio languages.  
Changing the Audio Channel  
ForVCD  
If you want to skip the index menu  
and playback directly from the  
beginning,  
G Press AUDIO to select the available  
audio channels provided by the disc  
(MONO LEFT, MONO RIGHT, MIX-  
MONO, STEREO).  
G Press DISC MENU key on the remote  
control to switch to PBC off.  
Subtitles  
G Press SUBTITLE repeatedly to select  
different subtitle languages.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
27  
001-45 DVP5140_Eng_02RC5  
27  
09/10/06, 11:09 AM  
Disc Operations  
Advance features of the DivX® Ultra  
Playing a DivX® disc  
G XSUBsubtitles let you author  
movies with multiple language subtitle  
sets.  
G Interactive video menus offer  
unprecedented convenience and control  
so you can quickly navigate between  
various scenes or bonus features, and  
select from audio track and subtitle  
options.  
G Alternate audio tracks enable audio  
tracks in multiple language versions or  
separate audio tracks for specific speaker  
configurations  
G Chapter points provide flexibility,  
allowing you to jump straight to the scene  
you want to watch from anywhere within  
the video.  
This DVD player supports the DivX®  
movie playback that you download from  
your computer onto a CD-R/RW or  
DVD R/RW (see page 32 for more  
information).  
1 Load a DivX® disc.  
Playback will start automatically. If not  
press PLAY/PAUSE 2;.  
2 Pressing SUBTITLE on the remote  
control will turn on or off the subtitle.  
G If multilingual subtitles are embedded on  
the DivX® disc, pressing SUBTITLE will  
change the subtitle language during  
playback.  
Helpful Hints:  
Subtitle files with the following filename  
extensions (.srt, .smi, .sub, .ssa, .ass) are  
supported but do not appear on the file  
navigation menu.  
The subtitle filename have to be the  
same as the filename of the movie.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
28  
001-45 DVP5140_Eng_02RC5  
28  
09/10/06, 11:09 AM  
Disc Operations  
Playback selection  
Playing MP3/WMA/JPEG/Kodak  
Picture CD  
During playback, you can;  
G Press PREV ¡/ NEXT to select the  
previous/next track/file in the current  
folder.  
IMPORTANT!  
You have to turn on yourTV and set to  
the correctVideo In channel. (See page  
17 “Setting up theTV”).  
G Press 1 234on the remote to rotate/  
flip the picture files.  
General Operation  
G Press PLAY/PAUSE 2;repeatedly to  
1 Load a disc.  
pause/resume playback.  
The disc reading time may exceed 30  
seconds due to the complexity of the  
directory/file configuration.  
The data disc menu appears on theTV  
screen.  
Zoom picture (JPEG)  
G During playback, press ZOOM  
repeatedly to display the picture with  
different scales.  
G Use 3412 to view the zoomed picture.  
01:42 04:40 128kbps  
001/020  
Coco Lee  
Playback with multi-angles (JPEG)  
G During playback, press 3412 to rotate  
the picture on theTV screen.  
--  
Before  
MP3  
Coco  
Coco  
-
-
Before  
I love  
- - - - - -  
3: flip the picture vertically by 180˚  
4: flip the picture horizontally by 180˚  
1: rotate the picture anti-clockwise by 90˚  
2: rotate the picture clockwise by 90˚  
MP3  
ALBUM - - - - - -  
2002  
MP3 Coco  
-
Jazz  
Helpful Hints:  
2 Press 34to select the folder and press  
It may not be possible to play certain  
OK to open the folder.  
MP3/JPEG disc due to the configuration and  
characteristics of the disc or condition of the  
recording.  
3 Press 34to select a track/file.  
4 Press PREV ¡/ NEXT to go to  
It is normal to experience an occasional  
“skip” while listening to your MP3 disc.  
For multi-session discs with different  
formats, only the first session will be available.  
previous/next page.  
5 Press OK to confirm.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
29  
001-45 DVP5140_Eng_02RC5  
29  
09/10/06, 11:09 AM  
Disc Operations  
Preview Function (JPEG)  
Playing MP3/WMA music and JPEG  
picture simultaneously  
This function shows the content of the  
current folder or the whole disc.  
1 Load a disc that contains music and  
picture.  
1 Press DISPLAY during playback.  
12 thumbnail pictures will appear on  
theTV screen.  
The disc menu appears on theTV  
screen.  
2 Select an MP3/WMA track.  
3 During MP3/WMA music playback, select  
a picture from theTV screen and press  
PLAY/PAUSE 2;.  
The picture files will be played back  
one after another until end of the folder.  
4 To quit simultaneous playback, press Ç.  
S
T
Helpful Hint:  
Some files on Kodak or JPEG disc may  
2 Press PREV ¡/ NEXT to display the  
be distorted during playback due to the  
configuration and characteristics of the disc.  
other pictures on the previous/next page.  
3 Press 1 234on highlight one of the  
picture and press OK to start playback.  
4 Press DISC MENU to return to Picture  
CD menu.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
30  
001-45 DVP5140_Eng_02RC5  
30  
09/10/06, 11:09 AM  
DVD Setup Menu Options  
This DVD Player setup is carried out via  
theTV, enabling you to customise the  
DVD Player to suit your particular  
requirements.  
Dimming players display panel  
You can select different levels of  
brightness for the display screen.  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {DISPLAY DIM}, then press 2.  
General Setup menu  
100% Select this for full brightness.  
70% – Select this for medium brightness.  
40% – Select this for dimming the display.  
1 In disc mode, press SETUP.  
2 Press 1 2 to select ‘General Setup’ icon.  
3 Press OK to confirm.  
2 Press 3 4 to select a setting, then press  
- - General Setup Page - -  
OK to confirm your selection.  
Disc Lock  
Display Dim  
Programme  
OSD Language  
Sleep  
Programming disc tracks (not for  
Picture CD/MP3/WMA/DivX®)  
DIVX(R) Vod Code  
You can play the contents of the disc in  
the order you want by programming the  
tracks to be played. Up to 20 tracks can  
be stored.  
Go to General Setup Page  
1 In ‘GENERAL SETUP PAGE’, press 3 4  
to highlight {PROGRAM}, then press 2  
to select {INPUT MENU}.  
Locking/Unlocking the disc for  
viewing  
Not all discs are rated or coded by the  
disc maker. You can prevent a specific disc 2 Press OK to confirm.  
from playing by locking the disc. Up to 40  
Programme : Track (01 - 17)  
discs can be locked.  
1
2
3
4
5
04  
10  
11  
__  
__  
6
7
8
9
__  
__  
__  
__  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {DISC LOCK}, then press 2.  
10 __  
Exit  
START  
NEXT  
LOCK  
Select this to block the playback of the  
current disc. Subsequent access to a  
locked disc requires six-digit password.  
The default password is ‘136 900’ (see  
page 40 “Changing the password”).  
To input your favourite tracks/chapter  
3 Use the numeric keypad (0-9) to enter  
a valid track/chapter number.  
4 Use 1234keys to move the cursor to  
the next position.  
UNLOCK  
Select this to unlock the disc and allow  
future playback.  
If the track number is more than ten,  
press NEXT to open the next page  
and proceed with programming or,  
Use 1234keys to highlight {NEXT}  
on the programme menu, then press OK.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
5 Repeat steps 3~4 to input another  
track/chapter number.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
31  
001-45 DVP5140_Eng_02RC5  
31  
09/10/06, 11:09 AM  
DVD Setup Menu Options  
If you want to remove a track  
6 Use 1234keys to move the cursor to  
DivX(R)VOD registration code  
DivX® VOD (Video On Demand)  
registration code allows you to rent and  
purchase videos using the DivX® VOD  
service from the internet.  
the track you want to remove.  
7 Press OK to remove this track from the  
programme menu.  
For more information, visit us at  
To start programme playback  
8 Use 1234keys to highlight {START}  
on the programme menu, then press OK.  
Playback will start with the selected  
tracks under the programmed sequence.  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {DIVX(R)VOD CODE}, then  
press 2.  
The registration code will appear.  
To exit programme playback  
9 Use 1234keys to highlight {EXIT} on  
2 Press OK to exit.  
3 Use the registration code to purchase or  
rent the videos from DivX® VOD service  
the programme menu, then press OK.  
OSD Language  
instructions and download the video onto  
a CD-R for playback on this DVD player.  
This menu contains various language  
options for display language on the screen.  
For details, see page 20.  
Helpful Hints:  
All the downloaded videos from DivX®  
VOD can only be played back on this DVD  
player.  
Sleep  
Sleep function allows you to turn off the  
DVD Player automatically after a preset  
time.  
Time search feature is not available  
during DivX® movie playback.  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {SLEEP}, then press 2.  
15 Mins  
Turn off the DVD Player after 15 minutes.  
30 Mins  
Turn off the DVD Player after 30 minutes.  
45 Mins  
Turn off the DVD Player after 45 minutes.  
60 Mins  
Turn off the DVD Player after 60 minutes.  
OFF  
Turn off the sleep function.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
32  
001-45 DVP5140_Eng_02RC5  
32  
09/10/06, 11:09 AM  
DVD Setup Menu Options  
Digital Audio Setup  
Audio Setup Menu  
The options included in Digital Audio  
Setup are:‘Digital Output’ and ‘LPCM  
Output’.  
1 In disc mode, press SETUP.  
2 Press 1 2 to select ‘Audio Setup’ icon.  
3 Press OK to confirm.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {DIGITAL AUDIO SETUP}, then  
press 2.  
- - Audio Setup Page - -  
Analog Output  
Digital Audio Setup  
Sound Mode  
2 Press the 3 4 keys to highlight an option.  
CD Upsampling  
Night Mode  
3 Enter its submenu by pressing 2.  
4 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
Go to Audio Setup Page  
Digital Output  
Set the Digital output according to your  
optional audio equipment connection.  
Off:Turn off the digital output.  
All: If you have connected your  
DIGITAL AUDIO OUT to a multi-channel  
decoder/receiver.  
PCM Only: Only if your receiver is  
not capable of decoding multi-channel  
audio.  
Analog Output  
This options allows you to set the stereo  
analog output of your DVD Player.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {ANALOG OUTPUT}, then  
press 2.  
Stereo  
Helpful Hints:  
Select this option when output delivers  
sound from only the two front speakers.  
If DIGITAL OUTPUT is set to ‘All’, all  
audio settings except MUTE are invalid.  
LT/RT  
Select this option if your DVD Player is  
connected to a Dolby Pro Logic decoder.  
LPCM Output  
If you connect the DVD Player to a PCM  
compatible receiver via the digital  
terminals, such as coaxial or optical etc,  
you may need to adjust ‘LPCM Output’.  
Discs are recorded at a certain sampling  
rate.The higher the sampling rate, the  
better the sound quality.  
V SURR  
Allows the DVD player to use virtual  
surround sound effects.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
48K: Playback a disc recorded at the  
sampling rate of 48kHz.  
96K: Playback a disc recorded at the  
sampling rate of 96kHz that can only be  
achieved in Stereo-Classic (Flat) mode.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
33  
001-45 DVP5140_Eng_02RC5  
33  
09/10/06, 11:09 AM  
DVD Setup Menu Options  
Sound Mode  
CD Upsampling  
This feature allows you to convert your  
music CD to a higher sampling rate using  
sophisticated digital signal processing for  
better sound quality. If you have activated  
the upsampling, the player will  
The options included in Sound Mode  
Setup are: ‘3D’,‘Movie Mode’ and ‘Music  
Mode’.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {SOUND MODE}, then press 2.  
automatically switch to stereo mode.  
2 Press the 3 4 keys to highlight an option.  
1 InAUDIO SETUP PAGE’, press 3 4 to  
3 Enter its submenu by pressing 2.  
highlight {CD UPSAMPLING}, then press 2.  
4 Press 3 4 to select a setting, then press  
OFF  
OK to confirm your selection.  
Select this to disable CD-upsampling.  
3D  
88.2 kHz (X2)  
Select this to convert the sampling rate of  
the CDs twice higher than the original.  
This function provides a virtual surround  
sound experience using just two speakers.  
Off, Living Room, Hall,Arena and  
Church  
176.4 kHz (X4)  
Select this to convert the sampling rate of  
the CDs four times higher than the  
original.  
Movie Mode  
Select a Sound Mode that matches the  
type of music you are playing.These  
preset Sound Modes adjust the frequency  
bands of the video to enhance your  
favourite movie sound track.  
Off, Sci-Fic,Action, Drama and  
Concert  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
Helpful Hint:  
CD upsampling feature is only applicable  
to stereo output setting.  
Music Mode  
Select a Sound Mode that matches the  
type of music you are playing.These  
preset Sound Modes adjust the frequency  
bands of the audio to enhance your  
favourite music.  
Off, Digital, Rock, Classic and Jazz  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
34  
001-45 DVP5140_Eng_02RC5  
34  
09/10/06, 11:09 AM  
DVD Setup Menu Options  
Night Mode - turning on/off  
Video Setup Menu  
In this mode, the high volume outputs are  
softened. It is useful for watching your  
favourite action movie without disturbing  
others at night.  
1 In disc mode, press SETUP.  
2 Press 1 2 to select ‘Video Setup’ icon.  
3 Press OK to confirm.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
- - Video Setup Page - -  
highlight {NIGHT MODE}, then press 2.  
TV Type  
TV Display  
Progressive  
Picture Setting  
Component  
ON  
Select this to level out the volume. This  
feature is only available for movies with  
Dolby Digital mode.  
OFF  
Go To Video Setup Page  
Select this when you want to enjoy the  
surround sound with its full dynamic  
range.  
TVType  
2 Press 3 4 to select a setting, then press  
This menu contains the options for  
selecting the colour system that matches  
the connectedTV. For details, see page  
19.  
OK to confirm your selection.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
35  
001-45 DVP5140_Eng_02RC5  
35  
09/10/06, 11:09 AM  
DVD Setup Menu Options  
Setting theTV Display  
Progressive - turning on/off  
Set the aspect ratio of the DVD Player  
according to theTV you have connected.  
The format you select must be available  
on the disc. If it is not, the setting forTV  
display will not affect the picture during  
playback.  
In the progressive scan mode, you can  
enjoy the high quality picture with less  
flickers. It only works when you have  
connected the DVD player’sY Pb Pr jacks  
to yourTV that supports the progressive  
video input. Otherwise, a distorted  
picture will appear on theTV. For proper  
progressive scan set up, see page 18.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
highlight {TV DISPLAY}, then press 2.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
2 Press 3 4 to highlight one of the options  
highlight {PROGRESSIVE}, then press 2.  
below:  
OFF  
4:3 PAN SCAN –  
To disable Progressive Scan function.  
Select this if you have  
a normalTV and want  
both sides of the  
picture to be trimmed or formatted to fit  
yourTV screen.  
ON  
To enable Progressive Scan function.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
4:3 LETTER BOX –  
Select this if you have a  
normalTV. In this case, a  
wide picture with black  
bands on the upper and lower portions of  
theTV screen will  
Follow the instructions shown on the  
TV to confirm the selection (if any).  
If a distorted picture appears on theTV  
screen, wait for 15 seconds for auto  
recovery.  
be displayed.  
16:9 – Select this if  
you have a wide-  
screenTV.  
3 Select an item and press OK.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
36  
001-45 DVP5140_Eng_02RC5  
36  
09/10/06, 11:10 AM  
DVD Setup Menu Options  
4 Press 3 4 to highlight one of the  
Picture Setting  
following options.  
This DVD Player provides three  
predefined sets of picture colour settings  
and one personal setting which you can  
define yourself.  
BRIGHTNESS  
Increase the value to brighten the picture  
or vice versa. Choose zero (0) for average  
setting.  
G You can also press SMART PICTURE  
on the DVD player’s front panel to  
directly access to the picture colour  
settings.  
CONTRAST  
Increase the value to sharpen the picture  
or vice versa. Choose zero (0) to balance  
the contrast.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
highlight {PICTURE SETTING}, then press  
2.  
TINT  
Increase the value to darken the picture  
or vice versa. Choose zero (0) for  
average setting.  
STANDARD  
Select this for standard picture setting.  
COLOR  
VIVID  
Increase the value to enhance the colour  
in your picture or vice versa. Choose zero  
(0) to balance the colour.  
Select this to make theTV picture  
brighter.  
COOL  
5 Press 1 2 to adjust the setting that best  
Select this to make theTV picture softer.  
suits your personal preference.  
PERSONAL  
6 Repeat steps 4~5 for adjusting other  
Select this to personalise your picture  
colour by adjusting the brightness,  
contrast, tint and colour (saturation).  
colour features.  
7 Press OK to confirm.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
3 If you select {PERSONAL}, then proceed  
to steps 4~7.  
The ‘personal picture setup’ menu  
appears.  
Personal Picture Setup  
Brightness  
Contrast  
Tint  
0
0
0
0
Color  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
37  
001-45 DVP5140_Eng_02RC5  
37  
09/10/06, 11:10 AM  
DVD Setup Menu Options  
Preference Page  
Switching theYUV/RGB  
This setting allows you to toggle the  
output of the video signal between RGB  
(on scart) andY Pb Pr (YUV).  
1 Press Ç twice to stop playback (if any),  
then press SETUP.  
2 Press 1 2 to select thePreference Page’  
icon.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
highlight {COMPONENT}, then press 2.  
3 Press OK to confirm.  
YUV  
- - Preference Page - -  
Select this forY Pb Pr connection.  
Audio  
Subtitle  
RGB  
Disc Menu  
Parental  
PBC  
Select this for Scart connection.  
2 Press 3 4 to select a setting, then press  
Mp3 / Jpeg Nav  
Password  
OK to confirm your selection.  
Go To Preference Page  
Warning:  
When the player is set toY Pb Pr  
(YUV), someTV may not properly  
synchronise with player on the  
SCART connector.  
Audio, Subtitle, Disc Menu  
These menus contain various language  
options for audio, subtitle and disc menu  
which may be recorded on the DVD. For  
details, see page 20.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
38  
001-45 DVP5140_Eng_02RC5  
38  
09/10/06, 11:10 AM  
DVD Setup Menu Options  
Rating explanations  
Restricting playback by Parental  
Control  
1 KID SAFE  
– Kids material; recommended especially for  
children and viewers of all ages.  
Some DVDs may have a parental level  
assigned to the complete disc or to  
certain scenes on the disc. This feature  
lets you set a playback limitation level.  
The rating levels are from 1 to 8 and are  
country dependent. You can prohibit the  
playing of certain discs that are not  
suitable for your children or have certain  
discs played with alternative scenes.  
2 G  
– General Audience; recommended as  
acceptable for viewers of all ages.  
3 PG  
– Parental Guidance suggested.  
4 PG13  
– Material is unsuitable for children under age  
13.  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
highlight {PARENTAL}, then press 2.  
5-6 PG-R  
– Parental Guidance - Restricted;  
recommended that parents restrict children  
under 17 from viewing or allow to view only  
when supervised by a parent or adult guardian.  
- - Preference Page - -  
Audio  
1 KID SAFE  
2 G  
Subtitle  
Disc Menu  
Parental  
PBC  
3 PG  
7 NC-17  
4 PG 13  
5 PGR  
6 R  
– No children under age 17; not  
recommended viewing for children under age  
17.  
Mp3 / Jpeg Nav  
Password  
7 NC17  
Set KID SAFE  
8 ADULT  
– Mature material; should be viewed only by  
adults due to graphic sexual material, violence  
or language.  
2 Press 3 4 to highlight a rating level for  
the disc inserted and press OK.  
To disable Parental controls and have  
all Discs play, select {8 ADULT}.  
3 Use the numeric keypad (0-9) to enter  
the six-digit password (see page 40  
“Changing the password”).  
DVDs that are rated above the level  
you selected will not play unless you  
enter your six-digit password.  
Helpful Hints:  
VCD, SVCD, CD have no level indication,  
so parental control function has no effect on  
these type of discs.This applies to most  
illegal DVD discs.  
Some DVDs are not encoded with a  
rating though the movie rating may be  
printed on the Disc cover. The rating level  
feature does not work for such Discs.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
39  
001-45 DVP5140_Eng_02RC5  
39  
09/10/06, 11:10 AM  
DVD Setup Menu Options  
Changing the Password  
PBC  
The same password is used for both  
Parental Control and Disc Lock. Enter  
your six-digit password when prompted  
on the screen. The default password is  
136900.  
You can set the PBC to ON or OFF. This  
feature is available only onVideo CD 2.0  
with playback control (PBC) feature. For  
details, see page 27.  
MP3/JPEG Menu - turning on/off  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
highlight {PASSWORD}, then press 2 to  
select {CHANGE}.  
MP3/JPEG Navigator can be set only if the  
disc is recorded with menu. It allows you  
to select different display menus for easy  
navigation.  
2 Press OK and the menu appears.  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
Old Password  
New Password  
Confirm PWD  
highlight {MP3/JPEG NAV}, then press 2.  
WITHOUT MENU  
Select this to display all the files contained  
OK  
in the MP3/Picture CD.  
WITH MENU  
Select this to display only the folder menu  
of the MP3/Picture CD.  
3 Use the numeric keypad (0-9) to enter  
your old six-digit password.  
When doing this for the first time, key  
in ‘136900’.  
If you forget your old six-digit  
password, key in ‘136900’.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
4 Enter the new six-digit password.  
5 Enter the new six-digit password a second  
time to confirm.  
The new six-digit password will now  
take effect.  
6 Press OK to confirm.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
40  
001-45 DVP5140_Eng_02RC5  
40  
09/10/06, 11:10 AM  
DVD Setup Menu Options  
Setting the DivX® Subtitle font  
Restoring to original settings  
Setting the DEFAULT function will reset  
all options and your personal settings to  
the factory defaults, except your  
password for Parental Control and Disc  
Lock.  
You can set the font type that supports  
the recorded DivX® subtitle.  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
highlight {DivX® SUBTITLE}, then press 2.  
Standard  
1 In ‘PREFERENCE PAGE’, press 34 to  
highlight {DEFAULT}, then press 2 to  
select {RESET}.  
Albanian, Danish, Dutch, English, Finnish,  
French, Gaelic, German, Italian, Kurdish  
(Latin), Norwegian, Portuguese, Spanish  
Swedish andTurkish.  
2 Press OK to confirm.  
All settings will now reset to factory  
defaults.  
Cyrillic  
Bulgarian, Belorussian, English,  
Macedonian, Moldavian, Russian, Serbian  
and Ukrainian.  
Central European  
Albanian, Croat, Czech, Dutch, English,  
German, Hungarian, Irish, Polish,  
Romanian, Slovak, Slovene and Sorbian.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
41  
001-45 DVP5140_Eng_02RC5  
41  
09/10/06, 11:10 AM  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will  
invalidate the warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If  
you are unable to remedy a problem by following these hints, consult your dealer or  
Philips for help.  
Problem  
Solution  
No power  
– Check if the AC power cord is properly connected.  
– Press the STANDBY ON on the front of the DVD  
system to turn on the power.  
No picture  
– Refer to yourTV’s manual for correctVideo In  
channel selection. Change theTV channel until you  
see the DVD screen.  
– Check if theTV is switched on.  
– If the progressive scan feature is activated but the  
connectedTV does not support progressive signals  
or the cables are not connected accordingly, see  
page 18 for proper progressive scan set up or  
deactivate the progressive scan feature as below:  
1) Turn off yourTV progressive scan mode or turn on  
to interlaced mode.  
2) Press OPEN/CLOSE to open the disc tray.  
3) Press numeric keypad ‘1’ on the remote control for  
few seconds.  
Distorted picture  
– Sometimes a small amount of picture distortion may  
appear depending on the disc being played back.This  
is not a malfunction.  
Completely distorted picture or  
black/white picture with DVD  
– Connect DVD Player directly to theTV.  
– Make sure the disc is compatible with the DVD/  
Player.  
– Ensure that the DVD Player’sTVType is set to match  
that of the Disc and yourTV.  
No sound or distorted sound  
No audio at digital output  
– Adjust the volume.  
– Check that the speakers are connected correctly.  
– Check the digital connections.  
– Check if your receiver can decode MPEG-2 and if  
not, please make sure the digital output is set to  
PCM.  
– Check if the audio format of the selected audio  
language matches your receiver capabilities.  
No sound and picture  
– Check that the RGB/SCART cable is connected to  
the correct device (See ConnectingTV).  
42  
001-45 DVP5140_Eng_02RC5  
42  
09/10/06, 11:10 AM  
Troubleshooting  
Problem  
Solution  
Disc cant be played  
– The DVD+R/CD-R must be finalised.  
– Ensure the disc label is facing up.  
– Check if the disc is defective by trying another disc.  
– Region code incorrect.  
Picture freezes momentarily  
during playback  
– Check the disc for fingerprints/scratches and  
clean with a soft cloth wiping from centre to edge.  
No return to start-up screen when  
disc is removed  
– Reset the unit by switching the player off, then on  
again.  
The player does not respond to  
the Remote Control  
– Aim the Remote Control directly at the sensor  
on the front of the player.  
– Reduce the distance to the player.  
– Replace the batteries in the Remote Control.  
– Re-insert the batteries with their polarities (+/–  
signs) as indicated.  
Buttons do not work  
To completely reset the player, unplug the AC  
cord from the AC outlet for 5-10 seconds.  
Player does not respond to some  
operating commands during playback.  
– Operations may not be permitted by the disc.  
Refer to the instructions of the disc jacket.  
DVD Player cannot read  
CDs/DVDs  
– Use a commonly available cleaning CD/DVD to  
clean the lens before sending the DVD Player for  
repair.  
Menu items cannot be selected  
Unable to play DivX® movies  
– Press STOP twice before selecting System Menu.  
– Depending on the disc availability, some menu items  
cannot be selected.  
– Check that the DivX® file is encoded in ‘Home  
Theater’ mode with DivX® 5.x encoder.  
Unable to select Progressive Scan on/off – Check that the output of the video signal is switch to  
‘YUV’.  
No sound during DivX® movies playback – The audio codec may not be supported by the DVD  
player.  
An DivX® movies does  
not repeat  
– Check that file size of the movies does not exceed  
the file size of the CD disc during burning.  
43  
001-45 DVP5140_Eng_02RC5  
43  
09/10/06, 11:10 AM  
Specifications  
AUDIO PERFORMANCE  
TV STANDARD (PAL/50Hz) (NTSC/60Hz)  
DA Converter  
DVD  
24 bit, 192 kHz  
Number of lines  
Playback  
625  
525  
fs 96 kHz  
fs 48 kHz  
fs 48 kHz  
fs 44.1kHz  
fs 44.1kHz  
4Hz- 44kHz  
4Hz- 22kHz  
4Hz- 22kHz  
4Hz- 20kHz  
4Hz- 20kHz  
> 100 dB  
Multistandard (PAL/NTSC)  
SVCD  
VIDEO PERFORMANCE  
Video DAC  
YPbPr  
Video Output  
RGB (SCART)  
12 bit, 108mHz  
CD/VCD  
0.7Vpp — 75 ohm  
1Vpp — 75 ohm  
0.7Vpp — 75 ohm  
Signal-Noise (1kHz)  
Dynamic range(1kHz)  
Crosstalk (1kHz)  
> 90 dB  
> 100 dB  
Distortion/noise (1kHz)  
> 85 dB  
VIDEO FORMAT  
Digital Compression MPEG 2 for DVD,SVCD  
MPEG MP3  
MPEG Audio L3  
MPEG 1 forVCD  
DivX®  
CONNECTIONS  
Scart Output  
YPbPr Output  
Video Output  
Audio Output(L+R) Cinch (white/red)  
Euroconnector  
Cinch 3x  
Cinch (yellow)  
DVD  
Horiz. resolution  
Vertical resolution  
50Hz  
60Hz  
720 pixels  
576 lines  
720 pixels  
480 lines  
VCD  
50Hz  
60Hz  
Digital Output  
1 coaxial  
Horiz. resolution  
Vertical resolution  
352 pixels  
288 lines  
352 pixels  
240 lines  
IEC60958 for CDDA / LPCM  
IEC61937 for MPEG 1/2,  
Dolby Digital  
AUDIO FORMAT  
Digital  
MPEG/ AC-3/ compressed Digital  
CABINET  
Dimensions (w x h x d)  
Weight  
PCM  
16, 20, 24 bits  
435 x 37 x 235 mm  
Approximately 2.0 kg  
fs, 44.1, 48, 96 kHz  
MP3(ISO 9660) 96, 112, 128, 256  
kbps & variable  
bit rate fs, 32, 44.1,  
48 kHz  
POWER CONSUMPTION  
Power Supply Rating  
Power consumption  
230V; 50Hz  
< 10W  
Analog Sound Stereo  
Dolby Surround compatible downmix from Dolby Digital  
multi-channel sound  
Power consumption in Standby mode < 0.8W  
Specifications subject to change without prior notice  
44  
001-45 DVP5140_Eng_02RC5  
44  
09/10/06, 11:10 AM  
Glossary  
Analog: Sound that has not been turned into  
numbers. Analog sound varies, while digital sound has  
specific numerical values. These jacks send audio  
through two channels, the left and right.  
Aspect ratio: The ratio of vertical and horizontal  
sizes of a displayed image.The horizontal vs. vertical  
ratio of conventionalTVs. is 4:3, and that of wide-  
screens is 16:9.  
AUDIO OUT Jacks: Jacks on the back of the DVD  
System that send audio to another system (TV, Stereo,  
etc.).  
Bit Rate: The amount of data used to hold a given  
length of music; measured in kilobits per seconds, or  
kbps. Or, the speed at which you record. Generally,  
the higher the bit rate, or the higher the recording  
speed, the better the sound quality. However, higher  
bit rates use more space on a Disc.  
Chapter: Sections of a picture or a music piece on a  
DVD that are smaller than titles. A title is composed  
of several chapters. Each chapter is assigned a chapter  
number enabling you to locate the chapter you want.  
ComponentVideo Out Jacks: Jacks on the back of  
the DVD System that send high-quality video to aTV  
that has ComponentVideo In jacks (R/G/B, Y/Pb/Pr,  
etc.).  
MP3: A file format with a sound data compression  
system.MP3is the abbreviation of Motion Picture  
Experts Group 1 (or MPEG-1) Audio Layer 3. By using  
MP3 format. one CD-R or CD-RW can contain about  
10 times as much data volume as a regular CD can.  
Multichannel: DVD is specified to have each sound  
track constitute one sound field. Multichannel refers  
to a structure of sound tracks having three or more  
channels.  
Parental Control: A function of the DVD to limit  
playback of the disc by the age of the users according  
to the limitation level in each country. The limitation  
varies from disc to disc; when it is activated, playback  
will be prohibited if the softwares level is higher than  
the user-set level.  
PCM (Pulse Code Modulation): A system for  
converting analog sound signal to digital signal for  
later processing, with no data compression used in  
conversion.  
Playback control (PBC): Refers to the signal  
recorded on video CDs or SVCDs for controlling  
reproduction. By using menu screens recorded on a  
Video CD or SVCD that supports PBC, you can enjoy  
interactive-type software as well as software having a  
search function.  
Disc menu: A screen display prepared for allowing  
selection of images, sounds, subtitles, multi-angles, etc  
recorded on a DVD.  
Progressive Scan: It displays all the horizontal lines  
of a picture at one time, as a signal frame. This system  
can convert the interlaced video from DVD into  
progressive format for connection to a progressive  
display. It dramatically increases the vertical  
resolution.  
Region code: A system for allowing discs to be  
played back only in the region designated beforehand.  
This unit will only play discs that have compatible  
region codes. You can find the region code of your  
unit by looking on the product label. Some discs are  
compatible with more than one region (or ALL  
regions).  
Surround: A system for creating realistic three-  
dimensional sound fields full of realism by arranging  
multiple speakers around the listener.  
Title: The longest section of a picture or music  
feature on DVD, music, etc., in video software, or the  
entire album in audio software. Each title is assigned a  
title number enabling you to locate the title you want.  
VIDEO OUT jack: Jack on the back of the DVD  
System that sends video to aTV.  
Digital: Sound that has been converted into  
numerical values. Digital sound is available when you  
use the DIGITAL AUDIO OUT COAXIAL or  
OPTICAL jacks.These jacks send audio through  
multiple channels, instead of just two channels as  
analog does.  
DivX® 3.11/4.x/5.x: The DivX® codec is a patent-  
pending, MPEG-4 based video compression  
technology, developed by DivX®Networks, Inc., that  
can shrink digital video to sizes small enough to be  
transported over the internet, while maintaining high  
visual quality.  
Dolby Digital: A surround sound system developed  
by Dolby Laboratories containing up to six channels  
of digital audio (front left and right, surround left and  
right, center and subwoofer).  
DTS: DigitalTheatre Systems. This is a surround  
sound system, but it is different from Dolby Digital.  
The formats were developed by different companies.  
JPEG: A very common digital still picture format.A  
still-picture data compression system proposed by the  
Joint Photographic Expert Group, which features small  
decrease in image quality in spite of its high  
compression ratio.  
45  
001-45 DVP5140_Eng_02RC5  
45  
09/10/06, 11:10 AM  

IBM 9519 AG1 User Manual
JVC Computer Monitor TM A170G User Manual
LG Electronics LCE30845 User Manual
Logitech Wireless Desktop MK710 User Manual
Memorex MPH2430 User Manual
Optiquest Q115 User Manual
Panasonic CT 13R38S User Manual
Philips 220BI User Manual
Philips Computer Monitor 19S4LC User Manual
Philips PLUS 220BW8 User Manual