DVD VIDEO PLAYER
DVP5106K
User manual
Thank you for choosing Philips.
Need help fast?
Read your User’s Manual first for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
you may access our online help at www.philips.com/support
13/06/05, 11:04DAMVP5106K/93_1
01-42 DVP5106K_971
1
‘CONSUMERS SHOULD NOTETHAT NOT
ALL HIGH DEFINITIONTELEVISION SETS
ARE FULLY COMPATIBLEWITHTHIS
PRODUCT AND MAY CAUSE ARTIFACTS
TO BE DISPLAYED INTHE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THATTHE USER SWITCHTHE
CONNECTIONTOTHE ‘STANDARD
DEFINITION’ OUTPUT. IFTHERE ARE
QUESTIONS REGARDING OURTV SET
COMPATIBILITYWITHTHIS MODEL 525p
AND 625p DVD PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.’
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on apparatus.
Due to the inconsistency of disc formats
provided by various disc manufacturers, your
DVD system may require a playability
enhancement or upgrade. As DVD technology
advances, these enhancements will become
common and will be easy to complete.
software upgrade.
13/06/05, 11:04DAMVP5106K/93_1
01-42 DVP5106K_971
3
General Information
Environmental Information
Laser safety
All unnecessary packaging has been
omitted.The packaging has been made
easy to separate into two materials:
cardboard (box, buffer) and polyethylene
(bags, protective foam sheet).
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
NOTE:
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
PICTURES SHOWN MAYBE
DIFFERENT BETWEEN
COUNTRIES.
CAUTION
(WARNING LOCATION: ONTHE
BACKPLATE OFTHE SET)
NEVER MAKE OR CHANGE
CONNECTIONSWITHTHE
POWER SWITCHED ON.
DivX, DivX Certified, and
associated logos are
trademarks of
DivXNetworks, Inc and
are used under license.
Important Note:
“DTS”, and “DTS Digital Surround” are
registered trademarks of DigitalTheater
Systems, Inc.
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs,
Philips is unable to guarantee that
this DVD Player is fully compatible
with such new discs. Should you have
difficulty playing any such CD-Audio
discs, kindly refer them to your CD-
Audio disc retailer.
Windows Media is a trademark of
Microsoft Coporation.
Specifications are subject to change
without notice.Trademarks are the
property of Koninklijke Philips Electronics
N.V. or their respective owners.
For Customer Use:
LASER
Type
Read carefully the information located at
the rear of your DVDVIDEO player and
enter below the Serial No. Retain this
information for future reference.
Semiconductor laser
GaAlAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
Wave length
Output Power
Model No. DVP 5106K
10 mW (VCD/CD)
Serial No. _______________
Beam divergence 60 degree
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
4
Language Code
Abkhazian
Afar
Afrikaans
Amharic
Arabic
Armenian
Assamese
Avestan
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa; Nyanja7889
9072
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9065
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
ꢀꢁꢁꢂꢃꢄꢅꢆ
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
5
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
5
Contents
Language Code................................................... 5
Disc Operations
Playable Discs ................................................. 19
Region Codes ................................................. 19
Playing discs..................................................... 19
Basic playback controls................................. 20
Selecting various repeat/shuffle functions 20
Repeat play mode ......................................... 20
Repeating a section within a chapter/track .
......................................................................... 20
Operations for video playback ................... 21
Using the Disc Menu.................................... 21
Zooming in ..................................................... 21
Resuming playback from the last stopped
point ................................................................ 21
Slow motion................................................... 21
Using the OSD menu .................................. 21
Special DVD features .................................... 22
Playing aTitle ................................................. 22
Camera Angle ................................................ 22
Changing the Audio Language .................... 22
Subtitles .......................................................... 22
SpecialVCD & SVCD Features ............. 22-23
Playback Control (PBC) .............................. 22
Preview ........................................................... 23
Playing DivX disc ........................................... 23
Playing MP3/Windows Media™ Audio/
MPEG-4/JPEG/Kodak Picture CD .............. 24
General Operation....................................... 24
Selecting a folder and track/file ................. 24
Special picture disc features ........................ 25
Preview Function .......................................... 25
Zoom picture ................................................ 25
Playback with multi-angles .......................... 25
Scan Effect ...................................................... 25
Playing MP3/Windows Media™ Audio music
and JPEG picture simultaneously............... 25
Introduction
Supplied accessories ....................................... 8
Care and safety information.......................... 8
Connections
ConnectingTV............................................ 9-10
Using CompositeVideo jacks (CVBS)........ 9
Using ComponentVideo jacks (Pr PbY) ... 9
Using an accessory RF modulator ............ 10
Connecting the power cord........................ 10
Optional: Connecting to a Multi-channel
Receiver ........................................................... 11
Receiver has a Dolby Digital or DTS
decoder........................................................... 11
Optional : Connecting to an Audio System .
........................................................................... 11
Stereo system has Dolby Pro Logic or Right
/ Left Audio In jack ....................................... 11
Optional: Connecting Digital AV Receiver ...
........................................................................... 12
Receiver has a PCM, Dolby Digital, or
MPEG2 decoder............................................ 12
Functional Overview
Front and Rear Panels .................................. 13
Remote Control ............................................ 14
Getting Started
Step 1: Inserting batteries into the
Remote Control ............................................ 15
Using the Remote Control to operate the
Player ............................................................... 15
Step 2: Setting up theTV ........................15-17
Setting up Progressive Scan feature (for
Progressive ScanTV only)........................... 16
To deactivate Progressive manually .......... 17
Selecting the colour system that
corresponds to yourTV.............................. 17
Step 3: Setting language preference ........... 18
Setting the OSD Language.......................... 18
Setting the Audio, Subtitle and Disc menu
language .......................................................... 18
Karaoke Operations
Playing Karaoke discs .................................... 26
General Operation....................................... 26
Key setting...................................................... 26
Vocal ................................................................ 26
Mode ............................................................... 26
6
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
6
Contents
DVD Menu Options
General Setup menu ...............................27-28
Locking/Unlocking the disc for viewing ... 27
Dimming system’s display screen .............. 27
Programming disc tracks.......................27-28
OSD Language............................................... 28
Screen Saver - turning on/off ..................... 28
Sleep ................................................................ 28
DivXVOD registration code ..................... 28
Audio Setup Menu ...................................29-31
Analogue output ........................................... 29
Digital Audio Setup....................................... 29
Sound Mode................................................... 30
Speaker Setup ................................................ 30
CD Upsampling ............................................. 30
Night Mode - turning on/off....................... 31
Video Setup Menu ...................................31-33
TVType ........................................................... 31
Setting theTV Display ................................. 32
Progressive - turning on/off ........................ 32
Picture Setting ............................................... 33
Preference Page........................................ 34-36
Audio, Subtitle, Disc Menu.......................... 34
Restricting playback by Parental Control.....
......................................................................... 34
PBC .................................................................. 35
MP3/JPEG Menu - turning on/off............... 35
Changing the Password ............................... 36
Setting the DivX Subtitle ............................ 36
Restoring to original settings ..................... 36
Sound andVolume Controls
Setting the speakers’ channels .................... 37
Troubleshooting ......................... 38–39
Specifications ...................................... 40
Glossary ......................................................................41
7
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
7
Introduction
G Do not block the vents
Supplied accessories
– Do not operate the DVD Player in an
enclosed cabinet, allow about 10 cm (4
inch) of free space all around the player
for adequate ventilation.
Composite video
cable (yellow)
10 cm
(4 inches)
10 cm
(4 inches)
PHILIPS
10 cm
(4 inches)
Audio cable
(white, red)
G Care of the cabinet
– Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits,
ammonia or abrasives.
G Finding a suitable location
– Place the player on a flat, hard, and
stable surface.
Remote Control
and
two AA batteries
– Install this system near the AC outlet
and where the AC power plug can be
reached easily.
PREVIEW MUTE
DIM
SLEEP SOUND SURROUND
G Disc handling
– To clean a CD, wipe it in a
straight line from the center
towards the edge using a soft,
lint-free cloth. A cleaning
agent may damage the disc!
– Write only on the printed side of a
CDR(W) and only with a soft felt-tipped pen.
– Handle the disc by its edge, do not
touch the surface.
Care and safety information
G Power consumption
– When the system is switched to
Standby mode, it is still consuming power.
To disconnect the system from the power
supply completely, remove the AC power
plug from the wall jack.
G Avoid high temperatures, moisture,
water and dust
– Do not expose the player, batteries or
discs to humidity, rain, sand or excessive
heat (caused by heating equipment or
direct sunlight.)
G Avoid condensation problem
– The lens may cloud over when the
player is suddenly moved from cold to
warm surroundings, making it impossible
to play a disc. Leave the player in the
warm environment until the moisture
evaporates.
8
13/06/05, 11:29DAMVP5106K/93_1
01-42 DVP5106K_971
8
Connections
ConnectingTV
COMPONENT
VIDEO IN
S-VIDEO
IN
COMPONENT
VIDEO IN
V
U
(Pr/Cr)
AUDIO
IN
S-VIDEO
V
U
Y
(Pr/Cr)
AUDIO
IN
(Pb/Cb)
VIDEO IN
(Pb/Cb)
VIDO IN
COMPONENT
VIDEO IN
Y
S-VIDEO
IN
V
U
(Pr/Cr)
AUDIO
OUT
COMPONENT
VIDEO IN
(Pb/Cb)
S-VIDEO
IN
V
I
D
E
O
I
N
V
U
(Pr/Cr)
AUDIO
IN
Y
(Pb/Cb)
V
I
D
E
O
I
N
Y
1
2
1
2
IMPORTANT!
– The progressive scan video
quality is only possible when usingY
Pb Pr and a progressive scanTV is
required.
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of yourTV system.
– Connect the DVD system directly
to theTV.
Using ComponentVideo jacks
(Y Pb Pr)
Using CompositeVideo jacks
(CVBS)
1 Use the component video cables (red/
blue/green) to connect the DVD system’s
Y Pb Pr jacks to the corresponding
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In,Video In, Composite or Baseband)
on theTV (cable supplied).
Component video input jacks (or labeled
asY Pb Pr) on theTV (cable not supplied).
2 To hear the sound of this DVD Player
through yourTV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on theTV
(cable supplied).
2 To hear the sound of this DVD Player
through yourTV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on theTV
(cable supplied).
3 Proceed to page 16 for detailed
Progressive Scan set up.
9
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
9
Connections
Connecting the power cord
RF coaxial cable toTV
2
Back of RF Modulator
(example only)
INT IN
TO TV
AUDIO IN
VIDEO
IN
R
L
CH3 CH4
COMPONENT
VIDEO IN
S-VIDEO
IN
V
U
Y
(Pr/Cr)
AUDIO
OUT
~
AC MAINS
(Pb/Cb)
VIDEO IN
Antenna or
CableTV signal
1
IMPORTANT!
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
– If yourTV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on theTV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.
When no disc is loaded, press
STANDBY ON on the DVD Player
front panel,
“EJECT” may appear on the display
panel.
Using an accessory RF modulator
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS jack to
the video input jack on the RF modulator.
EJECT
EJECT
2 Use the RF coaxial cable (not supplied) to
connect the RF modulator to yourTV’s
RF jack.
Helpful Hint:
–
Refer to the typeplate on the rear or
bottom of the product for identification and
supply ratings.
10
13/06/05, 11:29DAMVP5106K/93_1
01-42 DVP5106K_971
10
Connections
Optional: Connecting to a Multi-
channel Receiver
Optional: Connecting to an
Audio System
STEREO
AUDIO
IN
MULTICHANNEL AUDIO IN
FRONT
REAR
CENTER
AV Receiver
DIGITAL
R
L
R
FRONT
EAR
SUBW.
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
Receiver has a Dolby Digital or DTS
decoder
1 Select one of the video connections
(CVBSVIDEO IN, SCART or
1 Select one of the video connections
(CVBSVIDEO IN, S-VIDEO IN, SCART or
COMPONENTVIDEO IN) depending on
the options available on yourTV.
COMPONENTVIDEO IN) depending on
the options available on yourTV.
2 Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable not supplied).
2 Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
3 Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
(cable not supplied).
4 Set the DVD Player’s Analog Output to
‘Multichannel’ to enable playback of DVDs
recorded in Multi-channel. (see page 29
“Setting the analogue output”).
Helpful Hint:
–
If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
11
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
11
Connections
Optional: Connecting Digital AV
Receiver
AV Receiver
AUDIO
IN
DIGITAL
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1 Select one of the video connections
(CVBSVIDEO IN, SCART or
COMPONENTVIDEO IN) depending on
the options available on yourTV.
2 Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3 Set the DVD Player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 29
“Digital Output”).
Helpful Hint:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
12
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
12
Functional Overview
Front and Rear Panels
T NEXT
–To search or select next chapter or track
PREV S
–To search or select previous chapter or
track
STANDBY-ON B
–
To switch the DVD Player to Standby
mode or ON
9 STOP
–To stop playback
Disc slot
–
Insert disc here
2;PLAY
–To start or interrupt playback
EJECT /
–
To eject the disc
IR Sensor
– Point the remote control towards this
sensor
Display
–
Shows the current status of the DVD
Player
EJECT
MIC
– For connecting microphone
LEVEL
– Microphone volume control
Multichannel Audio Out
Mains (AC Power Cord)
– Center speaker, subwoofer, front
and rear speakers multichannel
connection
–
Connect to a standard AC outlet
VIDEO OUT (CVBS)
–
Connect to CVBSVideo input of aTV
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input of a
digital audio equipment
YPbPr (Component Video Out)
–
Connect toYPbPr input of aTV
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
13
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
13
Functional Overview
Remote Control
RETURN / TITLE
–To go back to previous menu /
show title menu
POWER B
–
To switch the DVD player to
standby mode or ON
DISC MENU
– Enters or exits the disc contents
menu
0-9 numerical key pad
–
Selects numbered items in a
menu
– Switches on or off the playback
control mode (forVCD version
2.0 only)
DISPLAY
–
Displays information onTV
screen during playback
1 2 3 4
– Selects an item in the menu/
fast backward/forward, slow forward/
backward
SYSTEM MENU
–
Access or exit DVD Player’s
system menu
PREVIEW MUTE
OK
KARAOKE
KEY
VOCAL
MODE
–Acknowledge menu selection
T
–
To search or select next chapter
or track
S
–To search or select previous
chapter or track
SUBTITLE
–
To access subtitle language in disc
menu
STOP ( 9 )
–To stop playback
ANGLE
–
PLAY ( B )
–To start playback
Selects a DVD camera angle
ZOOM
–
PAUSE ( ; )
–To pause playback temporarily /
frame-by-frame playback
Enlarge or reduce a picture on
theTV screen
AUDIO
–
To access audio language in disc
menu
REPEAT
– Selects various repeat modes
REPEAT (A-B)
– Repeats playback a specific section
on a disc
KARAOKE
–
To set MIC on or off
KEY
PREVIEW
–To preview the content of a track
or whole disc
–
To set key control
VOCAL
–
Choose audio channels or
karaoke methods
MUTE
– Disables or enables sound output
MODE
–
To toggle between ‘Vol’,‘Echo’ or
‘Key’
Helpful Hint:
Press “STOP” for few seconds to eject
the disc.
14
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
14
Getting Started
Step 2: Setting up theTV
Step 1: Inserting batteries into
the Remote Control
IMPORTANT!
Make sure you have completed all
the necessary connections. (See
pages 9-10 “ConnectingTV”).
3
1
2
1 Turn on theTV and set to the correct
video-in channel. You should see the
Philips DVD background screen on the
TV.
1 Open the battery compartment.
2 Usually these channels are between the
lowest and highest channels and may be
called FRONT,A/V IN, orVIDEO. See your
TV manual for more details.
2 Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3 Close the cover.
➜ Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see theVideo In
channel.
➜ Or, theTV Remote Control may have a
button or switch that chooses different
video modes.
Using the Remote Control to
operate the Player
1 Aim the Remote Control
directly at the remote
sensor (IR) on the front
panel.
➜ Or, set theTV to channel 3 or 4 if you
are using an RF modulator.
3 If you are using external equipment, (eg.
audio system or receiver), turn it on and
select the appropriate input source for
the DVD Player output. Refer to the
equipment owner’s manual for detail.
2 Do not put any objects
between the Remote
Control and the DVD
Player while operating
the DVD Player.
CAUTION!
– Remove batteries if they are
exhausted or if the Remote Control
is not being used for a long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed properly.
15
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
15
Getting Started
7 Select {PROGRESSIVE} to {ON}, then OK
Setting up Progressive Scan feature
(for Progressive ScanTV only)
to confirm.
➜ The instruction menu appears on the
TV.
The progressive scan display twice the
number of frames per seconds than
interlaced scanning (ordinary normalTV
system).With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
ACTIVATING PROGRESSIVE SCAN:
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
3. IF THERE IS DISTORTED PICTURE
WAIT 15 SECONDS FOR AUTO RECOVERY.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
Cancel
OK
1)YourTV can accept progressive signals,
a progressive scanTV is required.
2)You have connected the DVD player to
yourTV usingY Pb Pr (see page 9.)
OK
8 Press 1 to highlight
in the menu
and press OK to confirm.
There will be a distorted picture on
yourTV at this state until you turn
on the progressive scan mode on
yourTV.
1 Turn on yourTV.
2 Turn off yourTV progressive scan mode
or turn on interlaced mode (refer to your
TV user manual.)
9 Turn on yourTV progressive scan mode
(refer to yourTV user manual.)
➜ The below menu appears on theTV.
3 Press POWER on the remote control to
turn on the DVD player.
CONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF THE PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE
4 Select the correctVideo Input channel.
(See page 15).
➜ The DVD background screen appears
on theTV.
Cancel
OK
OK
5 Press SYSTEM MENU.
0 Press 1 to highlight
in the menu
6 Press 2repeatedly to select {VIDEO
and press OK to confirm.
➜ The set up is complete now and you
SETUP PAGE}.
can start enjoy the high quality picture.
- - Video Setup Page - -
TV Type
TV Display
Progressive
On
Off
Picture Setting
Set Interlace TV Mode
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
16
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
16
Getting Started
4 Press 3 4 to highlight one of the options
To deactivate Progressive manually
below:
G When the distorted picture still
appears on theTV, it may be due to
the connectedTV does not accept
progressive signals, and progressive is set
by mistake. You must reset the unit to
interlace format.
PAL – Select this if the connectedTV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connectedTV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
1 Turn off yourTV progressive scan mode
or turn on to interlaced mode (refer to
yourTV user manual.)
Multi – Select this if the connectedTV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
2 Press and hold EJECT on the DVD
player.
3 When the disc is ejected, press and hold
EJECT again, and numeric keypad ‘1’
on the remote control at the same time
for few seconds.
5 Select an item and press OK.
Helpful Hints:
–
Before changing the currentTV
➜ The DVD blue background screen
will appear on theTV.
Standard setting, ensure that yourTV
supports the ‘selectedTVType’ system.
–
If there is no proper picture on
Selecting the colour system that
corresponds to yourTV
yourTV, wait for 15 seconds for auto
recovery.
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, theTV and the DVD Player
should match.
CHANGING PAL TO NTSC:
1. ENSURE THAT YOUR TV SUPPORTS
NTSC STANDARD.
2. IF THERE IS DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15
SECONDS FOR AUTO RECOVERY.
OK
CANCEL
CANCEL
- - Video Setup Page - -
TV Type
PAL
CONFIRM AGAIN TO USE NEW TV
TYPE SETTING.
TV Display
Progressive
Picture Setting
Multi
NTSC
OK
NTSC TV
1 Press SYSTEM MENU.
2 Press 2repeatedly to select {VIDEO
SETUP PAGE}.
3 Press 3 4 to highlight {TVTYPE}, then
press 2.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
17
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
17
Getting Started
Step 3: Setting language
preference
Setting the Audio, Subtitle and Disc
menu language
You can choose your own preferred
language or soundtrack from audio,
subtitles and disc menu languages. If the
language selected is not available on the
disc, the disc’s default language will be
used instead.
You can select your preferred language
settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc.
Setting the OSD Language
The On-screen language for the system
menu will remain as you set it, regardless
of various disc languages.
- - Preference Page - -
Audio
English
Chinese
French
Subtitle
Disc Menu
Parental
PBC
Spanish
Portuguese
Polish
- - General Setup Page - -
Disc Lock
Display Dim
Program
Mp3/Jpeg Nav
Password
Italian
OSD Language
Screen Saver
Sleep
ENGLISH
Set Preference To English
DIVX(R) Vod Code
1 Press STOP twice then, press SYSTEM
MENU.
Set OSD Language English
2 Press 2repeatedly to select
{PREFERENCE PAGE}.
1 Press SYSTEM MENU.
3 Press 34 to highlight one of the options
below at a time, then press 2.
– ‘Audio’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
2 Press 2to select {GENERAL SETUP
PAGE}.
3 Press 3 4 to highlight {OSD
LANGUAGE}, then press 2.
– ‘Disc Menu’ (disc’s menu)
4 Press 34 to select a language and press
4 Press 34 to select a language and press
OK.
OK.
If the language you want is not in the
list, then select {OTHERS},
then use the numeric keypad (0-9) on
the remote to enter the 4-digit language
code ‘XXXX’ (see page 5 “Language
Code”) and press OK.
5 Repeat steps 3~4 for other language
settings.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
18
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
18
Disc Operations
IMPORTANT!
Region Codes
– If the inhibit icon (ø) appears on
theTV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
– Depending on the DVD orVIDEO
CD, some operations may be
different or restricted.
DVD discs must be labeled for ALL
regions or Region 5 in order to
play on this Player.You cannot play
Discs that are labeled for other
regions.
ALL
5
Helpful Hints:
–
It may not be possible to play CD-R/RW
– Do not push on the disc tray or
put any objects other than disc on
the disc tray. Doing so may cause
the disc player malfunction.
or DVD-R/RW in all cases due to the type of
disc or condition of the recording.
–
If you are having trouble playing a
certain disc, remove the disc and try a
different one. Improper formatted disc will
not play on this DVD Player.
Playable Discs
Your DVD Player will play:
– DigitalVideo Discs (DVDs)
– Video CDs (VCDs)
– SuperVideo CDs (SVCDs)
– DigitalVideo Discs +
Playing discs
1 Connect the power cords of the DVD
Player andTV (and any optional stereo or
AV receiver) to a power outlet.
Recordable[Rewritable] (DVD+R[W])
– Compact Discs (CDs)
2 Turn on theTV power and set to the
correctVideo In channel. (See page 15
“Setting up theTV”).
– MP3/Windows Media™ Audio discs,
picture (Kodak, JPEG) files on CD-R(W).
– JPEG/ISO 9660 format
– Maximum 30 characters display.
– Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)
– Supported Bit-rates : 32~256 kbps
(MPEG-1), 8~160 kbps (MPEG-2)
variable bitrates
3 Press STANDBY-ON on the DVD Player
front panel.
➜ You should see the Philips DVD
background screen on theTV.
4 Insert a disc in the disc slot.
➜ Make sure the label side is facing up.
For double-sided discs, load the side you
want to play facing up.
– MPEG-4 disc on CD-R(W):
– Simple profile
– Advanced simple profile (640-480)
– DivX disc on CD-R[W]/DVD+R[W]:
– DivX 3.11, 4.x and 5.x
– Q-pel accurate motion compensation
– Global Motion Compensation (GMC)
playback
5 Playback will start automatically. If not
press PLAY B.
➜ If a disc menu appears on theTV, see
page 21 “Using the Disc Menu”.
➜ If the disc is locked by parental control,
you must enter your six-digit password.
(See page 36).
6 Press EJECT / to eject or reload the
disc.
TIPS:
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
19
DVP5106K/93_1
21/06/05, 4:53 PM
01-42 DVP5106K_971
19
Disc Operations
Selecting various repeat/shuffle
functions
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Repeat play mode
G While playing a disc, press REPEAT
Pausing playback
continuously to choose a ‘Play Mode’.
1 During playback, press PAUSEÅ.
➜ Playback will pause and sound will be
muted.
CHAPTER (DVD)
–
to repeat playback of the current
chapter.
2 To resume normal playback, press
TRACK/TITLE (CD/SVCD/VCD/DVD)
PLAY B.
–
to repeat playback of the current
track (CD/SVCD/VCD)/title (DVD).
Selecting track/chapter
ALL
G Press S/ Tor use the numeric
keypad (0-9) to key in a track/chapter
number.
–
to repeat playback of all the disc and
all the programmed tracks.
SHUFFLE
➜ Pressing S/ T will replay the
same track/chapter.
–
to playback at random order.
to cancel the repeat mode.
OFF
–
Searching backward/forward
G Press 1/ 2, then press PLAY Bto
resume normal playback.
Helpful Hint:
–
ForVCD, repeat playback is not possible
➜ While searching, pressing 1/ 2
repeatedly again will decrease/increase
the search speed.
if the PBC mode is switched on.
Repeating a section within a
chapter/track
Stopping playback
G Press Ç.
1 While playing a disc, press REPEAT A-B
at your chosen starting point.
2 Press REPEAT A-B again at your chosen
end point.
➜ The section A and B can be set only
within the same chapter/track.
➜ The section will now repeat
continuously.
3 To exit the sequence, press REPEAT
A-B.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
20
13/06/05, 11:05DAMVP5106K/93_1
01-42 DVP5106K_971
20
Disc Operations
Slow Motion
Operations for video playback
(DVD/VCD/SVCD)
1 Press 34during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16
(backward or forward).
Using the Disc Menu
Depending on the disc, a menu may
appear on theTV screen once you load in
the disc.
➜ Sound will be muted.
2 To return to normal speed, press PLAY B.
Helpful Hint:
To select a playback feature or item
–
Slow backward is not possible onVCDs.
G Use 1234keys or numeric keypad
(0-9) on the remote, then press OK to
start playback.
Using the OSD menu
OSD menu shows the disc playback
information (for example, title or chapter
number, elapsed playing time, audio/
subtitle language), a number of operations
can be done without interrupting disc
playback.
To access or remove the menu
G Press DISC MENU on the remote.
Zooming in
This function allows you to enlarge the
picture on theTV screen and to pan
through the enlarged picture.
1 During playback, press DISPLAY.
➜ A list of available disc information
appears on theTV screen.
1 During playback, press ZOOM
repeatedly to display the picture with
different scales.
Menu
Title
01/01
09/12
2CH
Off
Chapter
Audio
Subtitle
Chinese
➜ Use 1234keys to pan through the
enlarged picture.
Bitrate 61
Title Remain 0:48:59
➜ Playback will continue.
Menu
Track
Disc Time 0:48:53
Track Time 0:48:53
Repeat
2 Press ZOOM repeatedly to return to
01/01
the original size.
Off
Bitrate 71
Total Elapsed 0:01:32
Resuming playback from the last
stopped point
2 Press 34to view the information and
Resume playback of the last 5 discs is
possible, even if the disc was ejected or
the power switched off.
press OK to access.
3 Press 2or OK to select an option.
4 Use the numeric keypad (0-9) to input
the number/time or press 34to make
the selection, then press OK to confirm.
➜ Playback will change to the chosen
time or to the selected title/chapter/
track.
G Load one of the last 5 discs.
➜ “LOAD” appears.
G Press PLAY Band the disc will be played
back from the last point.
To cancel resume mode
G In stop mode, press STOP 9again.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
21
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
21
Disc Operations
Special DVD Features
SpecialVCD & SVCD Features
Playback Control (PBC)
Playing aTitle
1 Press DISC MENU.
➜ The disc menu appears on theTV
screen.
ForVCD with Playback Control (PBC)
feature (version 2.0 only)
G Press DISC MENU to toggle between
‘PBC ON’ and ‘PBC OFF’.
2 Use 3 4 1 2 keys or numeric keypad
(0-9) to select a play option.
➜ If you select ‘PBC ON’, the disc menu
(if available) will appear on theTV.
➜ Use the S/ T or the numeric
keypad (0-9) to select a play option.
3 Press OK key to confirm.
Camera Angle
G Press ANGLE repeatedly to select
G During playback, pressing RETURN/
TITLE will return to the menu screen (if
PBC is on).
different desired angle.
Changing the Audio Language
For DVD
If you want to skip the index menu
and playback directly from the
beginning,
G Press AUDIO repeatedly to select
different audio languages.
G Press DISC MENU key on the remote
control to switch to PBC off.
Changing the Audio Channel
ForVCD
G Press AUDIO to select the available
audio channels provided by the disc
(MONO LEFT, MONO RIGHT, MIX-
MONO, STEREO).
Subtitles
G Press SUBTITLE repeatedly to select
different subtitle languages.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
22
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
22
Disc Operations
Preview Function (DVD/VCD)
Playing a DivX disc
The preview function allows you to
reduce the picture of 6 tracks enough to
display in a full screen.
This DVD player supports the DivX
movie playback that you download from
your computer onto a CD-R/RW (see
page 28 for more information).
1 Press PREVIEW.
➜ The preview menu appears on theTV
screen.
1 Load a DivX disc.
➜ Playback will start automatically. If not
press PLAY B.
Select Digest Type:
Title Digest
Select Digest Type:
Track Digest
Chapter Digest
Title Interval
Disc Interval
2 If the DivX movie contains external
subtitles, the subtitle menu will appear on
theTV screen for your selection.
Track Interval
Chapter Interval
(Video CD example)
(DVD example)
G In this case, pressing SUBTITLE on the
remote control will turn on or off the
subtitle.
2 Press 3 4 to select the PREVIEW type,
then press OK.
➜ The picture of each segment will
appear on the screen.
G If multilingual subtitles are embedded on
the DivX disc, pressing SUBTITLE will
change the subtitle language during
playback.
A
D
B
E
C
F
Helpful Hints:
–
Subtitle files with the following filename
extensions (.srt, .smi, .sub, .ssa, .ass) are
supported but do not appear on the file
navigation menu.
(example for 6 thumbnail pictures display)
3 Press 3 4 1 2 to select a track and input
your selected track number using the
numeric keypad (0-9), then press OK.
➜ Playback will start automatically on the
selected track.
–
The subtitle filename have to be the
same as the filename of the movie.
G For CDDA (Musical CD)
➜ Press PREVIEW to listen to the first
10 seconds of each sound track in the
disc.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
23
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
23
Disc Operations
During playback, you can;
Playing MP3/Windows Media™
Audio/MPEG-4/JPEG/Kodak
Picture CD
G Press S / T to select another track/
file in the current folder.
G Press REPEAT continuously to access
different ‘Play Mode’.
IMPORTANT!
You have to turn on yourTV and set to
the correctVideo In channel. (See page
15 “Setting up theTV”).
➜ FOLDER: files will be played back once.
➜ REPEAT ONE: one file being played
repeatedly.
➜ REPEAT FOLDER: all files in one folder
being played repeatedly.
General Operation
➜ SHUFFLE: all files in the current folder
being played at random order.
➜ SINGLE: play the selected file once,
then return to the menu.
1 Load a disc.
➜ The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
➜ The data disc menu appears on theTV
screen.
G Press Åto pause playback.
2 Playback will start automatically. If not
Helpful Hints:
press PLAY B.
–
It may not be possible to play certain
MP3/Windows Media™ Audio/JPEG/DivX/
MPEG-4 disc due to the configuration and
characteristics of the disc or condition of the
recording.
01:42 04:40
002/020
\ Coco Lee \
–
It is normal to experience an occasional
--
Before
“skip” while listening to your MP3/Windows
Media™ Audio disc.
–
MP3
Coco
Coco
-
-
Before
I love
- - - - - -
MP3
ALBUM - - - - - -
2002
It is normal to experience an occasional
MP3 Coco
-
Jazz
pixelation during MPEG-4/DivX playback
due to poor clarity of digital contents during
internet downloading.
–
For multi-session discs with different
Selecting a folder and track/file
formats, only the first session will be available.
1 Press 34to select the folder and press
OK to open the folder.
2 Press 34to select a track/file.
3 Press S / T to go to previous/next
page.
4 Press OK to confirm.
➜ Playback will start from the selected
file to the end of the folder.
G To select another folder from the current
disc, press 1to return to the root menu,
then press 34to make your selection
and press OK to confirm.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
24
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
24
Disc Operations
Zoom picture
Special picture disc features
1 During playback, press ZOOM repeatedly
IMPORTANT!
to display the picture with different scales.
You have to turn on yourTV and set to
the correctVideo In channel. (See page
15 “Setting theTV”).
2 Use 1234keys to view the zoomed
picture.
Playback with multi-angles
G Load a Picture disc (Kodak Picture CD,
JPEG).
G During playback, press 3412 to rotate
the picture on theTV screen.
➜ For Kodak disc, the slide show will
begin.
3: flip the picture vertically
➜ For JPEG disc, the picture menu
appears on theTV screen. Press PLAY B
to start the slide-show playback.
4: flip the picture horizontally
1: rotate the picture anti-clockwise
2: rotate the picture clockwise
Scan Effect
Preview Function (JPEG)
G Press ANGLE repeatedly to choose
different scan effect.
This function shows the content of the
current folder or the whole disc.
➜ Various scan effect appears on the top
left hand corner on theTV screen.
1 Press PREVIEW during playback.
➜ 12 thumbnail pictures will appear on
theTV screen.
Playing MP3/Windows Media™
Audio music and JPEG picture
simultaneously
1 Load a disc that contains music and
picture.
➜ The disc menu appears on theTV
screen.
2 Select an MP3/Windows Media™ Audio
2 Press S / T to display the other
track.
pictures on the previous/next page.
3 During MP3/Windows Media™ Audio
music playback, select a picture from the
TV screen and press PLAY B.
3 Use 1234 to highlight one of the
picture and press OK to start playback.
➜ The picture files will be played back
4 Press DISC MENU to return to Picture
one after another until end of the folder.
CD menu.
4 To quit simultaneous playback, press Ç.
Helpful Hint:
–
Some files on Kodak or JPEG disc may
be distorted during playback due to the
configuration and characteristics of the disc.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
25
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
25
Karaoke Operations
Playing Karaoke discs
Vocal
G You can fade out the original vocal from a
IMPORTANT!
karaoke disc.
You have to turn on yourTV and set to
the correctVideo In channel. (See page
15 “Setting up theTV”).
G Press VOCAL repeatedly to choose
different audio modes.
Helpful Hint:
General Operation
–
This function and on screen display
depends on the availability of the disc.
1 Connect a microphone (not supplied) to
MIC on the front panel of the DVD player.
Mode
G Press MODE repeatedly to toggle
between ‘Vol’,‘Echo’ or ‘Key’.
1 When ‘Vol’ is selected, press 12to adjust
the vocal value between 0 and 20.
2 When ‘Echo’ is selected, press 12to
adjust the echo value between 0 and 20.
3 When ‘Key’ is selected, press 12to
adjust the pitch value between -16 and 16.
2 Press KARAOKE repeatedly.
➜ ‘MIC ON/OFF’ appears on theTV
screen.
3 Load a karaoke disc and press PLAY B.
4 Adjust the microphone volume using MIC
LEVEL button on the side panel of the
DVD player.
Helpful Hint:
–
Before connecting the microphone, set
the microphone volume to the minimum level
to prevent howling.
Key setting
G This function allows you to adjust the key
tone level to match with your vocal.
G Press KEY and use 12 to adjust the
pitch to adopt your voice.
26
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
26
DVD Setup Menu Options
This DVD Player setup is carried out via
theTV, enabling you to customise the
DVD Player to suit your particular
requirements.
Dimming player’s display panel
You can select different levels of
brightness for the display screen.
1 In ‘GENERAL SETUP PAGE’, press 3 4 to
highlight {DISPLAY DIM}, then press 2.
General Setup menu
100% – Select this for full brightness.
70% – Select this for medium brightness.
40% – Select this for dimming the display.
1 In disc mode, press SYSTEM MENU.
2 Press 1 2 to select ‘General Setup’ icon.
3 Press OK to confirm.
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
- - General Setup Page - -
Programming disc tracks (not for
Picture CD/MP3/Windows Media™
Audio)
Disc Lock
Display Dim
Program
OSD Language
Screen Saver
Sleep
You can play the contents of the disc in
the order you want by programming the
tracks to be played. Up to 20 tracks can
be stored.
DIVX(R) Vod Code
Go to General Setup Page
1 In ‘GENERAL SETUP PAGE’, press 3 4
to highlight {PROGRAM}, then press 2
to select {INPUT MENU}.
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the
disc maker. You can prevent a specific disc
from playing by locking the disc. Up to 40
discs can be locked.
2 Press OK to confirm.
Programme : Track (01 - 17)
1
2
3
4
5
04
10
11
__
__
6
7
8
9
__
__
__
__
1 In ‘GENERAL SETUP PAGE’, press 3 4 to
10 __
highlight {DISC LOCK}, then press 2.
Exit
START
NEXT
LOCK
Select this to block the playback of the
current disc. Subsequent access to a
locked disc requires six-digit password.
The default password is ‘136 900’ (see
page 36 “Changing the password”).
To input your favourite tracks/chapter
3 Use the numeric keypad (0-9) to enter
a valid track/chapter number.
4 Use 1234keys to move the cursor to
the next position.
UNLOCK
Select this to unlock the disc and allow
future playback.
➜ If the track number is more than ten,
press T to open the next page and
proceed with programming or,
➜ Use 1234keys to highlight {NEXT}
on the programme menu, then press OK.
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
5 Repeat steps 3~4 to input another
track/chapter number.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
27
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
27
DVD Setup Menu Options
If you want to remove a track
6 Use 1234keys to move the cursor to
Sleep
Sleep function allows you to turn off the
DVD Player automatically after a preset
time.
the track you want to remove.
7 Press OK to remove this track from the
programme menu.
1 In ‘GENERAL SETUP PAGE’, press 3 4 to
highlight {SLEEP}, then press 2.
To start programme playback
8 Use 1234keys to highlight {START}
on the programme menu, then press OK.
➜ Playback will start with the selected
tracks under the programmed sequence.
15 Mins
Turn off the DVD Player after 15 minutes.
30 Mins
Turn off the DVD Player after 30 minutes.
45 Mins
To exit programme playback
Turn off the DVD Player after 45 minutes.
9 Use 1234keys to highlight {EXIT} on
the programme menu, then press OK.
60 Mins
Turn off the DVD Player after 60 minutes.
OSD Language
OFF
This menu contains various language
options for display language on the screen.
For details, see page 18.
Turn off the sleep function.
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
Screen Saver - turning on/off
DivX(R)VOD registration code
The screen saver will help to prevent your
TV display device from becoming
damaged.
Philips provide you the DivX® VOD
(Video On Demand) registration code
that allows you to rent and purchase
videos using the DivX® VOD service.
For more information, visit us at
1 In ‘GENERAL SETUP PAGE’, press 3 4 to
highlight {SCREEN SAVER}, then press 2.
ON
Select this if you wish to turn off theTV
screen when disc playback is stopped or
paused for more than 5 minutes.
1 In ‘GENERAL SETUP PAGE’, press 3 4 to
highlight {DIVX(R)VOD CODE}, then
press 2.
➜ The registration code will appear.
OFF
Select this to disable the screen saver
function.
2 Press OK to exit.
3 Use the registration code to purchase or
rent the videos from DivX® VOD service
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
instructions and download the video onto
a CD-R for playback on this DVD player.
Helpful Hints:
–
All the downloaded videos from DivX®
VOD can only be played back on this DVD
player.
–
Time search feature is not available
during DivX movie playback.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
28
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
28
DVD Setup Menu Options
Digital Audio Setup
Audio Setup Menu
The options included in Digital Audio
Setup are:‘Digital Output’ and ‘LPCM
Output’.
1 In disc mode, press SYSTEM MENU.
2 Press 1 2 to select ‘Audio Setup’ icon.
3 Press OK to confirm.
1 In ‘AUDIO SETUP PAGE’, press 3 4 to
highlight {DIGITAL AUDIO SETUP}, then
press 2.
- - Audio Setup Page - -
2 Press the 3 4 keys to highlight an option.
Analog Output
Digital Audio Setup
Sound Mode
3 Enter its submenu by pressing 2.
4 Press 3 4 to select a setting, then press
Speaker Setup
CD Upsampling
Night Mode
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜ Off:Turn off the digital output.
➜ All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜ PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Go to Audio Setup Page
Analog Output
Set Analog Output to match your DVD
Player’s playback capability.
1 In ‘AUDIO SETUP PAGE’, press 3 4 to
highlight {ANALOG OUTPUT}, then
press 2.
Helpful Hints:
Stereo
–
If DIGITAL OUTPUT is set to ‘All’, all
Select this option when output delivers
sound from only the two front speakers.
audio settings except MUTE are invalid.
LPCM Output
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate.The higher the sampling rate, the
better the sound quality.
V SURR
Allows the DVD player to use virtual
surround sound effects.
Multi Channel
Select this to enable Multi-channel output.
➜ 48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
➜ 96kHz: Playback a disc recorded at the
sampling rate of 96kHz that can only be
achieved in Stereo-Classic (Flat) mode.
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
Helpful Hint:
–
LPCM Output can be selected only when
PCM Only is activated.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
29
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
29
DVD Setup Menu Options
Sound Mode
CD Upsampling
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling, the player will
The options included in Sound Mode
Setup are: ‘3D’,‘Movie Mode’ and ‘Music
Mode’.
1 In ‘AUDIO SETUP PAGE’, press 3 4 to
highlight {SOUND MODE}, then press 2.
automatically switch to stereo mode.
2 Press the 3 4 keys to highlight an option.
1 In‘AUDIO SETUP PAGE’, press 3 4 to
3 Enter its submenu by pressing 2.
highlight {CD UPSAMPLING}, then press 2.
4 Press 3 4 to select a setting, then press
OFF
OK to confirm your selection.
Select this to disable CD-upsampling.
3D
88.2 kHz (X2)
Select this to convert the sampling rate of
the CDs twice higher than the original.
This function provides a virtual surround
sound experience using just two speakers.
➜ Off, Living Room, Hall,Arena and
Church
176.4 kHz (X4)
Select this to convert the sampling rate of
the CDs four times higher than the
original.
Movie Mode
Select a Sound Mode that matches the
type of music you are playing.These
preset Sound Modes adjust the frequency
bands of the video to enhance your
favourite movie sound track.
➜ Off, Sci-Fic,Action, Drama and
Concert
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
Helpful Hint:
–
CD upsampling feature is only applicable
to stereo output setting.
Music Mode
Select a Sound Mode that matches the
type of music you are playing.These
preset Sound Modes adjust the frequency
bands of the audio to enhance your
favourite music.
➜ Off, Digital, Rock, Classic and Jazz
Speaker Setup
This menu contains setup options for
your audio output which makes the
speaker setup system reproduce high
quality surround sound. For details, see
page 37.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
30
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
30
DVD Setup Menu Options
Video Setup Menu
Night Mode - turning on/off
In this mode, the high volume outputs are
softened and low volume outputs are
brought upward to an audible level. It is
useful for watching your favourite action
movie without disturbing others at night.
1 In disc mode, press SYSTEM MENU.
2 Press 1 2 to select ‘Video Setup’ icon.
3 Press OK to confirm.
1 In ‘AUDIO SETUP PAGE’, press 3 4 to
highlight {NIGHT MODE}, then press 2.
- - Video Setup Page - -
TV Type
ON
TV Display
Progressive
Picture Setting
Select this to level out the volume. This
feature is only available for movies with
Dolby Digital mode.
OFF
Select this when you want to enjoy the
surround sound with its full dynamic
range.
Go To Video Setup Page
TVType
2 Press 3 4 to select a setting, then press
This menu contains the options for
selecting the colour system that matches
the connectedTV. For details, see page
17.
OK to confirm your selection.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
31
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
31
DVD Setup Menu Options
Progressive - turning on/off
Setting theTV Display
Set the aspect ratio of the DVD Player
according to theTV you have connected.
The format you select must be available
on the disc. If it is not, the setting forTV
display will not affect the picture during
playback.
In the progressive scan mode, you can
enjoy the high quality picture with less
flickers. It only works when you have
connected the DVD player’sY Pb Pr jacks
to yourTV that supports the progressive
video input. Otherwise, the a distorted
picture will appear on theTV. For proper
progressive scan set up, see page 16.
1 In ‘VIDEO SETUP PAGE’, press 3 4 to
highlight {TV DISPLAY}, then press 2.
1 In ‘VIDEO SETUP PAGE’, press 3 4 to
2 Press 3 4 to highlight one of the options
highlight {PROGRESSIVE}, then press 2.
below:
OFF
4:3 PAN SCAN –
To disable Progressive Scan function.
Select this if you have
a normalTV and want
both sides of the
ON
To enable Progressive Scan function.
picture to be trimmed or formatted to fit
yourTV screen.
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
4:3 LETTER BOX –
Select this if you have a
normalTV. In this case, a
wide picture with black
bands on the upper and lower portions of
theTV screen will
➜ Follow the instructions shown on the
TV to confirm the selection (if any).
➜ If a distorted screen appears on theTV
picture, wait for 15 seconds for auto
recovery.
be displayed.
16:9 – Select this if
you have a wide-
screenTV.
3 Select an item and press OK.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
32
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
32
DVD Setup Menu Options
4 Press 3 4 to highlight one of the
Picture Setting
following options.
This DVD Player provides three
predefined sets of picture colour settings
and one personal setting which you can
define yourself.
BRIGHTNESS
Increase the value will brighten the
picture or vice versa. Choose zero (0) for
average setting.
1 In ‘VIDEO SETUP PAGE’, press 3 4 to
CONTRAST
highlight {PICTURE SETTING}, then press
2.
Increase the value will sharpen the picture
or vice versa. Choose zero (0) to balance
the contrast.
STANDARD
Select this for standard picture setting.
TINT
BRIGHT
Select this will make theTV picture
brighter.
Increase the value will darken the picture
or vice versa. Choose zero (0) for
average setting.
SOFT
COLOUR
Select this will make theTV picture softer.
Increase the value will enhance the colour
in your picture or vice versa. Choose zero
(0) to balance the colour.
PERSONAL
Select this to personalise your picture
colour by adjusting the brightness,
contrast, tint and colour (saturation).
5 Press 1 2 to adjust the setting that best
suit your personal preference.
2 Press 3 4 to select a setting, then press
6 Repeat steps 4~5 for adjusting other
OK to confirm your selection.
colour features.
3 If you select {PERSONAL}, then proceed
to steps 4~7.
7 Press OK to confirm.
➜ The ‘PERSONAL PICTURE SETUP’
menu appears.
Personal Picture Setup
Brightness
Contrast
Tint
0
0
0
0
Color
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
33
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
33
DVD Setup Menu Options
Preference Page
Restricting playback by Parental
Control
1 Press Ç twice to stop playback (if any),
Some DVDs may have a parental level
assigned to the complete disc or to
certain scenes on the disc. This feature
lets you set a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playing of certain discs that are not
suitable for your children or have certain
discs played with alternative scenes.
then press SYSTEM MENU.
2 Press 1 2 to select the‘Preference Setup’
icon.
3 Press OK to confirm.
- - Preference Page - -
Audio
Subtitle
1 In ‘PREFERENCE PAGE’, press 3 4 to
Disc Menu
Parental
PBC
highlight {PARENTAL}, then press 2.
MP3/JPEG Nav
Password
- - Preference Page - -
Set To Preference Page
Audio
1 KID SAFE
2 G
Subtitle
Disc Menu
Parental
PBC
3 PG
4 PG 13
5 PGR
6 R
Audio, Subtitle, Disc Menu
MP3/JPEG Nav
Password
These menus contain various language
options for audio, subtitle and disc menu
which may be recorded on the DVD. For
details, see page 18.
7 NC17
Set KID SAFE
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
34
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
34
DVD Setup Menu Options
2 Press 3 4 to highlight a rating level for
the disc inserted and press OK.
PBC
You can set the PBC to ON or OFF. This
feature is available only onVideo CD 2.0
with playback control (PBC) feature. For
details, see page 22.
➜ To disable Parental controls and have
all Discs play, select {8 ADULT}.
3 Use the numeric keypad (0-9) to enter
the six-digit password (see page 36
“Changing the password”).
MP3/JPEG Menu - turning on/off
➜ DVDs that are rated above the level
you selected will not play unless you
enter your six-digit password.
MP3/JPEG Navigator can be set only if the
disc is recorded with menu. It allows you
to select different display menus for easy
navigation.
Helpful Hints:
–
VCD, SVCD, CD have no level indication,
so parental control function has no effect on
these type of discs.This applies to most
illegal DVD discs.
1 In ‘PREFERENCE PAGE’, press 3 4 to
highlight {MP3/JPEG NAV}, then press 2.
WITHOUT MENU
Select this to display all the files contained
in the MP3/Picture CD.
–
Some DVDs are not encoded with a
rating though the movie rating may be
printed on the Disc cover. The rating level
feature does not work for such Discs.
WITH MENU
Select this to display only the folder menu
of the MP3/Picture CD.
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
35
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
35
DVD Setup Menu Options
Changing the Password
Setting the DivX Subtitle font
The same password is used for both
Parental Control and Disc Lock. Enter
your six-digit password when prompted
on the screen. The default password is
136 900.
You can set the font type that supports
the recorded DivX subtitle.
1 In ‘PREFERENCE PAGE’, press 3 4 to
highlight {DivX SUBTITLE}, then press 2.
STANDARD
A standard list of English subtitle fonts
provided by this DVD Player.
1 In ‘PREFERENCE PAGE’, press 3 4 to
highlight {PASSWORD}, then press 2 to
select {CHANGE}.
CYRILLIC
Select this to display a cyrillic subtitle fonts.
2 Press 3 4 to select a setting, then press
Old Password
New Password
Confirm PWD
OK to confirm your selection.
Restoring to original settings
OK
Setting the DEFAULT function will reset
all options and your personal settings to
the factory defaults, except your
password for Parental Control and Disc
Lock.
2 Use the numeric keypad (0-9) to enter
your old six-digit password.
➜ When doing this for the first time, key
in ‘136 900’.
➜ If you forget your old six-digit
password, key in ‘136 900’.
1 In ‘PREFERENCE PAGE’, press 34 to
highlight {DEFAULT}, then press 2 to
select {RESET}.
2 Press OK to confirm.
➜ All settings will now reset to factory
defaults.
3 Enter the new six-digit password.
4 Enter the new six-digit password a second
time to confirm.
➜ The new six-digit password will now
take effect.
5 Press OK to confirm.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
36
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
36
Sound andVolume Controls
{SUBWOOFER}
ON – when a subwoofer is connected.
OFF – when no subwoofer is connected.
Setting the speakers’ channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to your
surroundings and setup.
{SPEAKERVOLUME} –Volume level
setting for individual speakers (-6dB ~
+6dB).
IMPORTANT!
The speaker settings only available on
Multi-channel audio outputs.
- - Speakers Volume Setup - -
Front Left
Front Right
Center
0dB0
0dB0
0dB0
0dB0
0dB0
0dB0
1 Press STOP then, press SYSTEM
MENU.
Subwoofer
Rear Right
Rear Left
2 Press 2repeatedly to select {AUDIO
SETUP PAGE}.
3 Press 34 to highlight {SPEAKER SETUP},
{SPEAKER DELAY} – Delay times setting
in relation to the listening position/
distance for centre and surround
speakers (1m ~ 10m).
then press 2.
- - Audio Setup Page - -
Analog Output
Digital Audio Setup
Sound Mode
Speaker Setup
CD Upsampling
Night Mode
- - Speakers Distance Setup - -
Center
1.0M
1.0M
- - Speaker Setup Page - -
Subwoofer
Front Speakers
Center Speaker
Rear Speakers
Subwoofer
Large
Small
Rear Right
Rear Left
1.0M
1.0M
Speakers Volume
Speakers Delay
4 Enter its submenu by pressing 2.
6 Press 1 2 to adjust the setting that best
suit your surround sound needs.
5 Press 34 to highlight one of the options
below at a time, then press 2.
7 Press OK to confirm.
{FRONT SPEAKERS, CENTER SPEAKER,
REAR SPEAKERS}
OFF – when no speaker is connected.
LARGE – when connected speakers can
produce low frequency signals below
120Hz.
SMALL – when connected speakers
cannot produce low frequency signals
below 120Hz.
Helpful Hints:
–
Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
–
The test tone will be automatically
generated to help you judge the sound level
of each speaker.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
37
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
37
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem
Solution
No power
– Check if the AC power cord is properly connected.
– Press the STANDBY ON on the front of the DVD
system to turn on the power.
No picture
– Refer to yourTV’s manual for correctVideo In
channel selection. Change theTV channel until you
see the DVD screen.
– Check if theTV is switched on.
– If the progressive scan feature is activated but the
connectedTV does not support progressive signals
or the cables are not connected accordingly, see
page 16 for proper progressive scan set up or
deactivate the progressive scan feature as below:
1) Turn off yourTV progressive scan mode or turn on
to interlaced mode.
2) Press and hold EJECT on the DVD Player.
3) When the disc is ejected, press and hold EJECT again,
and numeric keypad ‘1’ on the remote control at the
same time for few seconds.
Distorted picture
– Sometimes a small amount of picture distortion may
appear depending on the disc being played back.This
is not a malfunction.
Completely distorted picture or
black/white picture with DVD
– Connect DVD Player directly to theTV.
– Make sure the disc is compatible with the DVD/
Player.
– Ensure that the DVD Player’sTVType is set to match
that of the Disc and yourTV.
No sound or distorted sound
No audio at digital output
– Adjust the volume.
– Check that the speakers are connected correctly.
– Check the digital connections.
– Check if your receiver can decode MPEG-2 or DTS
and if not, please make sure the digital output is set
to PCM.
– Check if the audio format of the selected audio
language matches your receiver capabilities.
38
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
38
Troubleshooting
Problem
Solution
Disc can’t be played
– The DVD+R/CD-R must be finalised.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– If you have recorded a Picture CD or MP3/Windows
Media™ Audio CD yourself, ensure that your disc
contains at least 10 pictures or 5 MP3/Windows
Media™ Audio tracks.
– Region code incorrect.
Picture freezes momentarily
during playback
– Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from centre to edge.
No return to start-up screen when
disc is removed
– Reset the unit by switching the player off, then on
again.
The player does not respond to
the Remote Control
– Aim the Remote Control directly at the sensor
on the front of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–
signs) as indicated.
Buttons do not work
– To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
Player does not respond to some
operating commands during playback.
– Operations may not be permitted by the disc.
Refer to the instructions of the disc jacket.
DVD Player cannot read
CDs/DVDs
– Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD Player for
repair.
Menu items cannot be selected
Unable to play DivX movies
– Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items
cannot be selected.
– Check that the DivX file is encoded in ‘Home
Theater’ mode with DivX 5.x encoder.
Unable to select Progressive Scan on/off – Check that the output of the video signal is switch to
‘YUV’.
No sound during DivX movies playback – The audio codec may not be supported by the DVD
player.
An MPEG-4 or DivX movies does
not repeat
– Check that file size of the movies does not exceed
the file size of the CD disc during burning.
39
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
39
Specifications
AUDIO PERFORMANCE
TV STANDARD (PAL/50Hz) (NTSC/60Hz)
DA Converter
DVD
24 bit, 192 kHz
Number of lines
Playback
625
525
fs 96 kHz
fs 48 kHz
fs 48 kHz
fs 44.1kHz
fs 44.1kHz
4Hz- 44kHz
4Hz- 22kHz
4Hz- 22kHz
4Hz- 20kHz
4Hz- 20kHz
> 100 dB
> 90 dB
> 100 dB
> 85 dB
Multistandard (PAL/NTSC)
SVCD
VIDEO PERFORMANCE
Video DAC
YPbPr
Video Output
12 bit, 108mHz
0.7Vpp — 75 ohm
1Vpp — 75 ohm
CD/VCD
Signal-Noise (1kHz)
Dynamic range(1kHz)
Crosstalk (1kHz)
VIDEO FORMAT
Digital Compression MPEG 2 for DVD,SVCD
Distortion/noise (1kHz)
MPEG MP3
MPEG Audio L3
MPEG 1 forVCD
MPEG-4
DivX
CONNECTIONS
YPbPr Output
Cinch 3x
DVD
50Hz
60Hz
Video Output
Cinch (yellow)
Horiz. resolution
Vertical resolution
720 pixels
576 lines
720 pixels
480 lines
Audio Output(L+R) Cinch (white/red)
Digital Output
1 coaxial
VCD
50Hz
60Hz
IEC60958 for CDDA / LPCM
IEC61937 for MPEG 1/2,
Dolby Digital
Horiz. resolution
Vertical resolution
352 pixels
288 lines
352 pixels
240 lines
6 channel analogue output
AUDIO FORMAT
Audio Front L/R
Audio Rear L/R
Audio Centre
Cinch (white/red)
Cinch (white/red)
Cinch (blue)
Digital
MPEG/ AC-3/ compressed Digital
PCM
16, 20, 24 bits
Audio Subwoofer
Cinch (black)
fs, 44.1, 48, 96 kHz
MP3(ISO 9660) 96, 112, 128, 256
kbps & variable
CABINET
Dimensions (w x h x d)
Weight
bit rate fs, 32, 44.1,
48 kHz
435 x 37 x 265 mm
Approximately 2.0 kg
Analog Sound Stereo
Dolby Surround compatible downmix from Dolby Digital
multi-channel sound
Dolby Pro Logic II
POWER CONSUMPTION
Power Supply Rating
110 – 240V;
50/60 Hz
< 10W
3D sound for virtual 5.1 channel sound on 2 speakers
Power consumption
Power consumption in Standby mode < 0.8W
Specifications subject to change without prior notice
40
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
40
Glossary
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital sound has
specific numerical values. These jacks send audio
through two channels, the left and right.
Aspect ratio: The ratio of vertical and horizontal
sizes of a displayed image.The horizontal vs. vertical
ratio of conventionalTVs. is 4:3, and that of wide-
screens is 16:9.
AUDIO OUT Jacks: Jacks on the back of the DVD
System that send audio to another system (TV, Stereo,
etc.).
Bit Rate: The amount of data used to hold a given
length of music; measured in kilobits per seconds, or
kbps. Or, the speed at which you record. Generally,
the higher the bit rate, or the higher the recording
speed, the better the sound quality. However, higher
bit rates use more space on a Disc.
Chapter: Sections of a picture or a music piece on a
DVD that are smaller than titles. A title is composed
of several chapters. Each chapter is assigned a chapter
number enabling you to locate the chapter you want.
ComponentVideo Out Jacks: Jacks on the back of
the DVD System that send high-quality video to aTV
that has ComponentVideo In jacks (R/G/B, Y/Pb/Pr,
etc.).
MP3: A file format with a sound data compression
system.“MP3” is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. By using
MP3 format. one CD-R or CD-RW can contain about
10 times as much data volume as a regular CD can.
Multichannel: DVD is specified to have each sound
track constitute one sound field. Multichannel refers
to a structure of sound tracks having three or more
channels.
Parental Control: A function of the DVD to limit
playback of the disc by the age of the users according
to the limitation level in each country. The limitation
varies from disc to disc; when it is activated, playback
will be prohibited if the software’s level is higher than
the user-set level.
PCM (Pulse Code Modulation): A system for
converting analog sound signal to digital signal for
later processing, with no data compression used in
conversion.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for controlling
reproduction. By using menu screens recorded on a
Video CD or SVCD that supports PBC, you can enjoy
interactive-type software as well as software having a
search function.
Disc menu: A screen display prepared for allowing
selection of images, sounds, subtitles, multi-angles, etc
recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when you
use the DIGITAL AUDIO OUT COAXIAL or
OPTICAL jacks.These jacks send audio through
multiple channels, instead of just two channels as
analog does.
DivX 3.11/4.x/5.x: The DivX codec is a patent-
pending, MPEG-4 based video compression
technology, developed by DivXNetworks, Inc., that can
shrink digital video to sizes small enough to be
transported over the internet, while maintaining high
Progressive Scan: It displays all the horizontal lines
of a picture at one time, as a signal frame. This system
can convert the interlaced video from DVD into
progressive format for connection to a progressive
display. It dramatically increases the vertical
resolution.
Region code: A system for allowing discs to be
played back only in the region designated beforehand.
This unit will only play discs that have compatible
region codes. You can find the region code of your
unit by looking on the product label. Some discs are
compatible with more than one region (or ALL
regions).
Surround: A system for creating realistic three-
dimensional sound fields full of realism by arranging
multiple speakers around the listener.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or the
entire album in audio software. Each title is assigned a
title number enabling you to locate the title you want.
VIDEO OUT jack: Jack on the back of the DVD
System that sends video to aTV.
visual quality.
Dolby Digital: A surround sound system developed
by Dolby Laboratories containing up to six channels
of digital audio (front left and right, surround left and
right, center and subwoofer).
DTS: DigitalTheatre Systems. This is a surround
sound system, but it is different from Dolby Digital.
The formats were developed by different companies.
JPEG: A very common digital still picture format.A
still-picture data compression system proposed by the
Joint Photographic Expert Group, which features small
decrease in image quality in spite of its high
compression ratio.
41
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
41
Meet Philips at the Internet
DVP 5106K
CLASS 1
LASER PRODUCT
sgpSL-0524/97-1
42
13/06/05, 11:06DAMVP5106K/93_1
01-42 DVP5106K_971
42
|