DVDVIDEO PLAYER
DVP4050
DVP4080
DVP4088
DVP4090
User Manual
6
36
66
96
使用手册 (简体)
使用手册 (繁體)
Manual Pengguna
Read your Quick Start Guide and/or User Manual first for quick tips
that make using your Philips product more enjoyable.
Register your product and get support
dvp4090-88-80-50_98_cover.indd
1
2007-10-11 1:32:28 PM
Index
The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
apparatus.
English------------------------------------ 6
------------------------------36
-----------------------------66
‘CONSUMERS SHOULD NOTETHAT NOT ALL HIGH
DEFINITIONTELEVISION SETS ARE FULLY
COMPATIBLEWITHTHIS PRODUCT AND MAY CAUSE
ARTIFACTSTO BE DISPLAYED INTHE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDEDTHATTHE USER
SWITCHTHE CONNECTIONTOTHE ‘STANDARD
DEFINITION’ OUTPUT. IFTHERE ARE QUESTIONS
REGARDING OURTV SET COMPATIBILITYWITHTHIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
Bahasa Melayu--------------------------96
CONTACT OUR CUSTOMER SERVICE CENTER.’
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protec-
tion technology must be authorized by Macrovi-
sion Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reserve
engineering or disassembly is prohibited.
3
dvp4090-88-80-50_98_cover.indd
3
2007-10-11 1:32:32 PM
General Information
Laser Safety
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
Manufactured under license from Dolby
Laboratories, Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
NOTE:
Pictures shown maybe different
between countries.
Windows Media and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
CAUTION:
WARNING LOCATION: ON THE
BACKPLATE OF THE SET
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE POWER
SWITCHED ON.
For Customer Use:
LASER
Read carefully the information located at
the bottom or rear of your DVD Video
player and enter below the Serial No.
Retain this information for future
reference.
Type
Semiconductor laser
InGaAlP (DVD)
AIGaAs (CD)
658 nm (DVD)
790 nm (CD)
7.0 mW (DVD)
10.0 mW (VCD/CD)
60 degrees
Wave length
Output Power
Beam divergence
Model No. DVP4050, 4080, 4088, 4090
Serial No. _______________________
4
dvp4090-88-80-50_98_cover.indd
4
2007-10-11 1:32:41 PM
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa; Nyanja7889
中文
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9072
9065
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
ꢀꢁꢁꢂꢃꢄꢅꢆ
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
5
dvp4090-88-80-50_98_cover.indd
5
2007-10-11 1:32:44 PM
Contents
Language Code................................................... 5
Disc Operations
Playable Discs ................................................. 18
Region Codes ................................................. 18
Playing discs..................................................... 19
Basic playback controls................................. 19
Selecting various repeat/shuffle functions 20
Repeat play mode ......................................... 20
Repeating a section within a chapter/track .
.......................................................................... 20
Operations for video playback (DVD/VCD/
SVCD) ........................................................ 21-22
Using the Disc Menu.................................... 21
Zooming in ..................................................... 21
Slow motion................................................... 21
Forward / Reverse Searching ..................... 21
OSD (On-Screen Display) .......................... 22
Special DVD Features ................................... 23
Playing aTitle ................................................. 23
Changing the Audio Language .................... 23
Subtitles .......................................................... 23
SpecialVCD & SVCD Features ................... 23
Playback Control (PBC) .............................. 23
Playing MP3/WMA/JPEG (Kodak) Picture CD
........................................................................... 24
General Operation....................................... 24
Playback selection ......................................... 24
Repeat ............................................................. 24
Fast forward / reverse (MP3/WMA) ........ 24
Introduction
Supplied accessories ....................................... 8
Cleaning discs ................................................... 8
Setup ................................................................... 8
Connections
ConnectingTV............................................ 9-10
Using CompositeVideo jacks (CVBS)........ 9
Using ComponentVideo jacks (Pr PbY) ... 9
Using an accessory RF modulator ............ 10
Connecting the power cord........................ 10
Optional : Connecting to a Stereo System ..
........................................................................... 11
Stereo system has Dolby Pro Logic or Right
/ Left Audio In jack ....................................... 11
Optional: Connecting Digital AV Receiver ...
........................................................................... 11
Receiver has a PCM, Dolby Digital, or
MPEG2 decoder............................................ 11
Functional Overview
Front and Rear Panels .................................. 12
Remote Control ............................................ 13
Getting Started
Step 1: Inserting batteries into the
Remote Control ............................................ 14
Using the Remote Control to operate the
Player ............................................................... 14
Step 2: Setting up theTV ........................14-16
Setting up Progressive Scan feature (for
Progressive ScanTV only)........................... 15
Selecting the colour system that
corresponds to yourTV.............................. 16
Step 3: Setting language preference ........... 17
Setting the OSD Language.......................... 17
Setting the Audio, Subtitle and Disc menu
language .......................................................... 17
6
01-35_DVP4080_4050_93_98_Eng
6
20/09/06, 5:34 PM
Contents
DVD Menu Options
General Setup menu ..................................... 25
Sleep ................................................................ 25
OSD Language............................................... 25
Audio Setup Menu ......................................... 26
Setting the Downmix................................... 26
Digital Audio Setup....................................... 26
Video Setup Menu ...................................27-28
TVType ........................................................... 27
Setting theTV Display ................................. 27
Progressive - turning on/off ........................ 28
Sharpness........................................................ 28
Brightness / Contrast / Color.................... 28
Preference Page........................................ 29-31
Audio, Subtitle, Disc Menu.......................... 29
Restricting playback by Parental Control.....
.................................................................. 29-30
Changing the Password ............................... 31
Restoring to original settings ..................... 31
Troubleshooting .......................... 32-33
Specifications ...................................... 34
Glossary ......................................................................35
7
01-35_DVP4080_4050_93_98_Eng
7
20/09/06, 5:34 PM
Introduction
Supplied accessories
Setup
Finding a suitable location
– Place the set on a flat, hard and stable
surface. Do not place the set on a carpet.
– Do not position the set on top of
other equipment that might heat it up
(e.g., receiver or amplifier).
Composite video
cable (yellow)
Audio cable
(white, red)
– Do not put anything under the set (e.g.,
CDs, magazines).
– Install this system near the AC outlet
and where the AC power plug can be
reached easily.
Space for ventilation
AC power cable
– Place the apparatus in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4.0”)
clearance from the rear and the top of
the set and 5cm (2.0”) from the left and
right to prevent overheating.
Remote Control
and
two AAA batteries
5cm (2.0")
10cm (4.0")
5cm (2.0")
10cm (4.0")
Cleaning discs
To clean a disc, use a micro fibre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.
Avoid high temperatures, moisture,
water and dust
CAUTION!
– Apparatus shall not be exposed to
Do not use solvents such as benzene,
thinner, commercially available cleaners, or
anti-static sprays intended for discs.
dripping or splashing.
– Do not place any sources of danger on
the apparatus (e.g., liquid filled objects,
lighted candles).
Since the optical unit (laser) of the DVD
system operates at a higher power than
regular DVD or CD players, cleaning CDs
intended for DVD or CD players may
damage the optical unit (laser).Therefore,
refrain from using a cleaning CD.
8
01-35_DVP4080_4050_93_98_Eng
8
20/09/06, 5:34 PM
Connections
ConnectingTV
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
S-VIDEO
IN
V
U
Y
(Pr/Cr)
AUDIO
IN
V
U
Y
(Pr/Cr)
AUDIO
IN
(Pb/Cb)
(Pb/Cb)
VIDEO IN
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
V
U
Y
(Pr/Cr)
AUDIO
IN
COMPONENT
VIDEO IN
(Pb/Cb)
S-VIDEO
IN
V
I
D
E
O
I
N
V
U
Y
(Pr/Cr)
AUDIO
IN
(Pb/Cb)
V
I
D
E
O
I
N
1
2
1
2
IMPORTANT!
IMPORTANT!
– The progressive scan video
quality is only possible when usingY
Pb Pr and a progressive scanTV is
required.
– You only need to make one video
connection from the following
options, depending on the
capabilities of yourTV system.
– Connect the DVD system directly
to theTV.
Using ComponentVideo jacks
(Y Pb Pr)
Using CompositeVideo jacks
(CVBS)
1 Use the component video cables (red/
blue/green) to connect the DVD system’s
Y Pb Pr jacks to the corresponding
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In,Video In, Composite or Baseband)
on theTV (cable supplied).
Component video input jacks (or labeled
asY Pb Pr) on theTV (cable not supplied).
2 To hear the sound of this DVD Player
through yourTV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on theTV
(cable supplied).
2 To hear the sound of this DVD Player
through yourTV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on theTV
(cable supplied).
3 Proceed to page 15 for detailed
Progressive Scan set up.
9
01-35_DVP4080_4050_93_98_Eng
9
20/09/06, 5:34 PM
Connections
Connecting the power cord
RF coaxial cable toTV
2
Back of RF Modulator
(example only)
INT IN
TO TV
AUDIO IN
VIDEO
IN
R
L
CH3 CH4
COMPONENT
VIDEO IN
S-VIDEO
IN
V
U
Y
(Pr/Cr)
AUDIO
OUT
~
AC MAINS
(Pb/Cb)
VIDEO IN
Antenna or
CableTV signal
1
IMPORTANT!
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
– If yourTV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on theTV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS jack to
the video input jack on the RF modulator.
2 Use the RF coaxial cable (not supplied) to
connect the RF modulator to yourTV’s
RF jack.
10
01-35_DVP4080_4050_93_98_Eng
10
20/09/06, 5:34 PM
Connections
Optional: Connecting to a Stereo
System
Optional: Connecting Digital AV
Receiver
STEREO
OPTICAL
OPTICAL
AUDIO
IN
AV Receiver
AUDIO
IN
DIGITAL
DIGITAL
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1 Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on yourTV.
1 Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on yourTV.
2 Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
2 Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
3 Set the DVD Player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 26
“Digital Output”).
Tip:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
11
01-35_DVP4080_4050_93_98_Eng
11
20/09/06, 5:34 PM
Functional Overview
Front and Rear Panels
ON
–
LED lights up when the power is on
STANDBY
IR Sensor
– Point the remote control towards this
sensor
–
LED lights up when the STANDBY
mode is on
POWER
9 STOP
– Stops playback
–
To switch the DVD player to ON or
OFF
2;PLAY/PAUSE
– Starts or pauses playback
OPEN/CLOSE
–
Opens or closes the disc tray
Mains (AC Power Cord)
– Connect to a standard AC outlet
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input of a
digital audio equipment
Audio Out (Left/Right)
– Connect to AUDIO inputs of an
amplifier, receiver or stereo system
YPbPr (Component Video Out)
CVBS (VIDEO Out)
– Connect to CVBSVideo input of aTV
–
Connect toYPbPr input of a TV
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
12
01-35_DVP4080_4050_93_98_Eng
12
21/09/06, 10:15 AM
Functional Overview
Remote Control
B
–
DISC MENU
– Enters or exits the disc contents
menu
Turns the player on or switches
it to standby mode
– Switches on or off the playback
control mode (forVCD version
2.0 only)
DISPLAY
–
Displays information on TV
screen during playback
RETURN / TITLE
– To go back to previous menu /
show title menu
1 2
–
Cursor buttons for moving to
the left or right, do a forward/
reverse search
PREV ( ¡ )
– Skips to the previous title/chapter/
track
3 4
–
Cursor buttons for moving up/
down, do a slow forward/
backward
NEXT ( ™ )
– Skips to the next title/chapter/
track
OK
–
Confirms an entry or selection
STOP ( 9 )
SETUP
– Stops playback
–
Enters or exits system setup
menu.
PLAY/PAUSE ( 2; )
– Starts or pauses playback
Alphanumeric keypad 0-9
MUTE ( H)
– Disables or enables sound output
–
Selects numbered items in a
menu
AUDIO
SUBTITLE
– Selects a DVD subtitle language
–
Selects an audio language
(DVD/VCD) or audio channels.
ZOOM
– Enlarge a picture on the TV
screen
REPEAT
– Selects various repeat mode
REPEAT A-B
– Repeats playback a specific section
on a disc
Tip:
Press “STOP” for about 2 seconds to
OPEN or CLOSE disc tray.
13
01-35_DVP4080_4050_93_98_Eng
13
20/09/06, 5:34 PM
Getting Started
Step 2: Setting up theTV
Step 1: Inserting batteries into
the Remote Control
IMPORTANT!
Make sure you have completed all
the necessary connections. (See
pages 9-10 “ConnectingTV”).
1 Turn on theTV and set to the correct
video-in channel. You should see the DVD
background screen on theTV.
2 Usually these channels are between the
lowest and highest channels and may be
called FRONT,A/V IN, orVIDEO. See your
TV manual for more details.
1 Open the battery compartment.
➜ Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see theVideo In
channel.
➜ Or, theTV Remote Control may have a
button or switch that chooses different
video modes.
2 Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
3 Close the cover.
Using the Remote Control to
operate the Player
➜ Or, set theTV to channel 3 or 4 if you
are using an RF modulator.
1 Aim the Remote Control
directly at the remote
sensor (IR) on the front
panel.
3 If you are using external equipment, (eg.
audio system or receiver), turn it on and
select the appropriate input source for
the DVD player output. Refer to the
equipment owner’s manual for detail.
2 Do not put any objects
between the Remote
Control and the DVD
Player while operating the
DVD Player.
CAUTION!
– Remove batteries if they are
exhausted or if the Remote Control
is not being used for a long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed properly.
14
01-35_DVP4080_4050_93_98_Eng
14
20/09/06, 5:34 PM
Getting Started
Setting up Progressive Scan feature
(for Progressive ScanTV only)
ACTIVATING PROGRESSIVE SCAN:
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
3. IF THERE IS A DISTORTED PICTURE, WAIT
15 SECONDS FOR AUTO RECOVERY.
The progressive scan display twice the
number of frames per seconds than
interlaced scanning (ordinary normalTV
system).With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Cancel
OK
8 Press 1 to highlight
in the menu
OK
and press OK to confirm.
There will be a distorted picture on
yourTV at this state until you turn
on the progressive scan mode on
yourTV.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1)YourTV can accept progressive signals,
a progressive scanTV is required.
2)You have connected the DVD player to
yourTV usingY Pb Pr (see page 9.)
9 Turn on yourTV progressive scan mode
(refer to yourTV user manual.)
➜ The below menu appears on theTV.
1 Turn on yourTV.
CONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF THE PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE.
2 Turn off yourTV progressive scan mode
or turn on interlaced mode (refer to your
TV user manual.)
Cancel
OK
3 Press POWER (B) on the remote
control to turn on the DVD player.
0 Press 1 to highlight
and press OK to confirm.
in the menu
OK
4 Select the correctVideo Input channel.
(See page 14).
➜ The set up is complete now and you
can start enjoy the high quality picture.
➜ The DVD background screen appears
on theTV.
To deactivate Progressive manually:
G Wait for 15 seconds for auto recovery.
OR
5 Press SETUP.
6 Press 2to select {VIDEO SETUP PAGE}.
1 Press OPEN/CLOSE on the DVD player
General
Audio
Video
Preference
to open the disc tray.
- - Video Setup Page - -
2 Press numeric keypad ‘1’ on the
remote control for few seconds.
➜ The DVD background screen appears
on theTV.
TY Type
TV Display
Progressive
Sharpness
Brightness
Contrast
On
Off
Tip:
Color
–
There are some progressive scanTV and
High-DefinitionTV sets that are not fully
compatible with this DVD system, resulting in
the unnatural picture when playing back a
DVDVIDEO disc in the progressive scan
mode. In such a case, turn off the
7 Select {PROGRESSIVE} to {ON}, then OK
to confirm.
➜ The instruction menu appears on the
TV.
progressive scan feature on both the DVD
player and yourTV set.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
15
01-35_DVP4080_4050_93_98_Eng
15
20/09/06, 5:35 PM
Getting Started
5 Select an item and press OK.
Selecting the colour system that
corresponds to yourTV
➜ Follow the instructions shown on the
TV to confirm the selection (if any).
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, theTV and the DVD Player
should match.
Tips:
–
Before changing the currentTV
Standard setting, ensure that yourTV
supports the ‘selectedTVType’ system.
–
If there is no proper picture on
yourTV, wait for 15 seconds for auto
recovery.
General
Audio
Video
Preference
- - Video Setup Page - -
TY Type
PAL
TV Display
Progressive
Sharpness
Brightness
Contrast
Multi
CHANGING NTSC TO PAL:
NTSC
1. ENSURE THAT YOUR TV SUPPORTS
PAL STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15 SECONDS
FOR AUTO RECOVER.
OK
CANCEL
Color
CONFIRM AGAIN TO USE NEW TV TYPE SETTING.
OK CANCEL
1 Press SETUP.
2 Press 2to select {VIDEO SETUP PAGE}.
3 Press 3 4 to highlight {TVTYPE}, then
To reset to defaultTV colour system
manually:
press 2.
4 Press 3 4 to highlight one of the options
G Wait for 15 seconds for auto recovery.
below:
OR
PAL – Select this if the connectedTV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
1 Press OPEN/CLOSE on the DVD player
to open the disc tray.
2 Press numeric keypad ‘3’ on the
remote control for few seconds.
➜ The DVD background screen appears
on theTV.
NTSC – Select this if the connectedTV
is NTSC system. It will change the video
signal of a PAL disc and output in NTSC
format.
Multi – Select this if the connectedTV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
16
01-35_DVP4080_4050_93_98_Eng
16
20/09/06, 5:35 PM
Getting Started
Step 3: Setting language
preference
Setting the Audio, Subtitle and Disc
menu language
You can choose your own preferred
language or soundtrack from audio,
subtitles and disc menu languages. If the
language selected is not available on the
disc, the disc’s default language will be
used instead.
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
Setting the OSD Language
The On-screen language for the system
menu will remain as you set it, regardless
of various disc languages.
General
Audio
Video
Preference
- - Preference Page - -
Audio
English
Chinese
French
Subtitle
Disc Menu
Parental
Password
Default
General
Audio
Video
Preference
Spanish
Portuguese
Polish
- - General Setup Page - -
OSD Language
Sleep
ENGLISH
Melayu
I
talian
Turkish
1 Press STOP twice then, press SETUP.
2 Press 2to select {PREFERENCE PAGE}.
3 Press 34to highlight one of the options
below at a time, then press 2.
– ‘Audio’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
1 Press SETUP.
2 Press 2to select {GENERAL SETUP
PAGE}.
– ‘Disc Menu’ (disc’s menu)
3 Press 3 4 to highlight {OSD
4 Press 34to select a language and press
LANGUAGE}, then press 2.
OK.
4 Press 34to select a language and press
If the language you want is not in the
list, then select {OTHERS},
OK.
then use the numeric keypad (0-9) on
the remote to enter the 4-digit language
code ‘XXXX’ (see page 5 “Language
Code”) and press OK.
5 Repeat steps 3~4 for other language
settings.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
17
01-35_DVP4080_4050_93_98_Eng
17
20/09/06, 5:35 PM
Disc Operations
IMPORTANT!
Region Codes
– If the inhibit icon (ø) appears on
theTV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
– Depending on the DVD orVIDEO
CD, some operations may be
different or restricted.
This DVD player is designed to support
the Region Management System. Check
the regional code number on the disc
package. If the number does not match
the player’s region number (see table
below), the player may be unable to
playback the disc.
– Do not push on the disc tray or
put any objects other than disc on
the disc tray. Doing so may cause
the disc player malfunction.
Tips:
–
It may not be possible to play CD-R/RW
or DVD-R/RW in all cases due to the type of
disc or condition of the recording.
–
If you are having trouble playing a
certain disc, remove the disc and try a
different one. Improper formatted disc will
not play on this DVD player.
Playable Discs
Your DVD Player will play:
– DigitalVideo Discs (DVDs)
– Video CDs (VCDs)
– SuperVideo CDs (SVCDs)
– DigitalVideo Discs +
Recordable[Rewritable] (DVD+R[W])
– Compact Discs (CDs)
– MP3 discs, picture (Kodak, JPEG)
files on CD-R(W).
– JPEG/ISO 9660 format
– Maximum 30 characters display.
– Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)
– Supported Bit-rates : 32~256 kbps
(MPEG-1), 8~160 kbps (MPEG-2)
variable bitrates
Discs that can
be played
Region
U.S.A. and
(Example)
ALL
ALL
ALL
ALL
1
2
Canada regions
U.K and
Europe regions
Asia Pacific,Taiwan,
Korea
3
4
Australia, New
Zealand, Latin America
Russia and India regions
ALL
ALL
5
6
– WMA files on CD-R(W).
– Supported Bit-rates : 32~192 kbps
China, Calcos Islands,
Walls and Futuna Islands
TIPS:
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
18
01-35_DVP4080_4050_93_98_Eng
18
20/09/06, 5:35 PM
Disc Operations
Basic playback controls
Playing discs
Unless otherwise stated, all operations
described are based on Remote Control
use.
1 Connect the power cords of the DVD
Player andTV (and any optional stereo or
AV receiver) to a power outlet.
2 Turn on theTV power and set to the
correctVideo In channel. (See page 14
“Setting up theTV”).
Pausing playback
1 During playback, press PLAY/PAUSE 2;
to pause playback and display a still
picture.
3 Press POWER button to turn on the
DVD player front panel.
➜ Sound will be muted.
➜ The DVD background screen appears
on theTV.
2 Press 4to select the next picture frame.
3 To resume normal playback, press
4 Press OPEN/CLOSE button to open the
top leader and load in a disc, then press
the same button again to close the disc
tray.
PLAY/PAUSE 2;again.
Selecting title/chapter/track/angle
G Press PREV ¡/ NEXT ™to go to the
G Make sure the label side is facing up.
For double-sided discs, load the side you
want to play facing up.
previous or next track/chapter.
G In STOP mode, press DISPLAY to
display the disc information text line for
title/chapter/track/angle.
5 Playback will start automatically. If not
press PLAY/PAUSE 2;.
G Use alphanumeric keypad (0-9) to
enter valid title/chapter/track/angle
number, then press OK.
➜ If a disc menu appears on theTV, see
page 21“Using the Disc Menu”.
➜ If the disc is locked by parental control,
you must enter your six-digit password.
(See page 31).
➜ The playback skips to the selected
title/chapter/track/angle.
G For more playback features, see pages 20-
Stopping playback
24.
G Press STOPÇ.
Tips:
–
Screen saver will start automatically if
the disc playback is stopped/paused for 5
minutes.
–
The player will automatically switch to
Power Standby mode if you do not press any
buttons for 15 minutes after the disc has
stopped playing.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
19
01-35_DVP4080_4050_93_98_Eng
19
20/09/06, 5:35 PM
Disc Operations
Selecting various repeat/shuffle
functions
Repeating a section within a
chapter/track
1 While playing a disc, press REPEAT A-B
Repeat play mode
at your chosen starting point.
The repeat play options vary depending
on the disc type.
2 Press REPEAT A-B again at your chosen
end point.
➜ The section A and B can be set only
within the same chapter/track.
➜ The section will now repeat
continuously.
1 While playing a disc, press REPEAT
continuously to choose a repeat options.
For DVD
– Chapter (currently playing chapter)
– Title (currently playing title)
– All (entire disc)
3 To exit the sequence, press REPEAT
A-B.
– Off (cancel)
ForVideo CD,Audio CD
– Track (currently playing track)
– All (entire disc)
– Off (cancel)
For MP3
– Repeat One (currently playing file)
– Repeat Folder (all files in selected folder)
– Folder (playing all files in one folder once)
– Shuffle (all files in current folder at random
playback)
– Single (currently playing file once)
For JPEG
In STOP mode,
– Repeat One (currently playing file)
– Repeat Folder (all files in selected folder)
– Folder (playing all files in one folder once)
– Shuffle (all files in current folder at random
playback)
– Single (currently playing file once)
In PLAY mode,
– Repeat One (currently playing file)
– Repeat All (playing all files in one disc)
– Repeat Off (cancel)
– Shuffle (all files in current folder at random
playback)
– Single (currently playing file once)
2 To cancel repeat playback, press
STOPÇ.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
20
01-35_DVP4080_4050_93_98_Eng
20
20/09/06, 5:35 PM
Disc Operations
Slow Motion
Operations for video playback
(DVD/VCD/SVCD)
1 Press 3during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16
(forward {DVD/SVCD/VCD}).
➜ Sound will be muted.
Using the Disc Menu
Depending on the disc, a menu may
appear on theTV screen once you load in
the disc.
2 To return to normal speed, press
PLAY/PAUSE 2;.
To select a playback feature or item
G Use 1234keys or numeric keypad
(0-9) on the remote, then press OK to
start playback.
Forward / Reverse Searching
1 Press 12during playback to select the
required speed: 2X, 4X, 8X, 16X or 32X
(backward or forward).
To access or remove the menu
➜ Sound will be muted (DVD/VCD) or
intermittent (CD).
G Press DISC MENU on the remote.
2 To return to normal speed, press PLAY/
Zooming in
PAUSE 2;.
This function allows you to enlarge the
picture on theTV screen and to pan
through the enlarged picture.
1 During playback, press ZOOM
repeatedly to display the picture with
different scales.
➜ Use 1234keys to pan through the
enlarged picture.
➜ Playback will continue.
2 Press ZOOM repeatedly to return to
the original size.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
21
01-35_DVP4080_4050_93_98_Eng
21
20/09/06, 5:35 PM
Disc Operations
For SuperVCD,VCD
➜ {Disc GoTo XX:XX}: enable to select
any part within the disc.
➜ {Track GoTo XX:XX}: enable to select
any part within the current track.
➜ {SelectTrack XX:TT}: enable to select
any track.
OSD (On-Screen Display)
This function displays disc information on
theTV screen during playback.
1 During playback, press DISPLAY
repeatedly.
➜ A list of available disc information
appears on theTV screen.
2 Use 12keys to select an option.
3 Enter hours, minutes and seconds from
left to right in the time edit box using
remote control numerical key pad.
➜ Playback will change to the chosen
time or to the selected title/chapter/
track.
For DVD
➜ {Title CT:TT Chapter XX/TC}: displays
the total available title and chapters in the
disc and enable to select a chapter for
viewing.
➜ {Title CT:TTTime X:XX:XX}: displays
the total available title in the disc and
enable to select the hour, minute and
second of the title.
➜ {Chapter CC:TCTime X:XX:XX}:
displays the total available chapter in the
disc and enable to select the hour, minute
and second of the title.
➜ {Angle 1/2}: displays the total available
angle in the disc and enable to select a
valid number and playback will show the
selected angle.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
22
01-35_DVP4080_4050_93_98_Eng
22
20/09/06, 5:35 PM
Disc Operations
Special DVD Features
Playing aTitle
SpecialVCD & SVCD Features
Playback Control (PBC)
1 Press DISC MENU.
➜ The disc title menu appears on theTV
screen.
ForVCD with Playback Control (PBC)
feature (version 2.0 only)
G Press DISC MENU to toggle between
‘PBC ON’ and ‘PBC OFF’.
2 Use 3 4 1 2 keys or numeric keypad
(0-9) to select a play option.
➜ If you select ‘PBC ON’, the disc menu
(if available) will appear on theTV.
➜ Use the PREV ¡/ NEXT ™or the
numeric keypad (0-9) to select a play
option.
3 Press OK key to confirm.
Changing the Audio Language
For DVD
G During playback, pressing RETURN/
TITLE will return to the menu screen (if
PBC is on).
G Press AUDIO repeatedly to select
different audio languages.
Changing the Audio Channel
ForVCD
If you want to skip the index menu
and playback directly from the
beginning,
G Press AUDIO to select the available
audio channels provided by the disc
(MONO LEFT, MONO RIGHT, MIX-
MONO, STEREO).
G Press DISC MENU key on the remote
control to switch to PBC off.
Subtitles
G Press SUBTITLE repeatedly to select
different subtitle languages.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
23
01-35_DVP4080_4050_93_98_Eng
23
20/09/06, 5:35 PM
Disc Operations
Playback selection
Playing MP3/WMA/JPEG
(Kodak) Picture CD
During playback, you can;
G Press PREV ¡/ NEXT ™to select the
previous/next track/file in the current
folder.
IMPORTANT!
You have to turn on yourTV and set to
the correctVideo In channel. (See page
14 “Setting up theTV”).
G Press PLAY/PAUSE 2;repeatedly to
pause/resume playback.
G Load a Picture disc (Kodak Picture CD,
JPEG).
Repeat
➜ For Kodak disc, the slide show will
begin.
➜ For JPEG disc, the picture menu
appears on theTV screen. Press PLAY/
PAUSE 2; to start the slide-show
playback.
G Press REPEAT continuously to access
different ‘Play Mode’.
➜ REPEAT ONE:keep a JPEG image still on
the screen or play an MP3 file repeatedly.
➜ REPEAT FOLDER: play all files in the
selected folder repeatedly.
➜ FOLDER: play all files in the selected
folder.
General Operation
➜ SHUFFLE: play all files in the selected
folder in random order.
1 Load a disc.
➜ The data disc menu appears on theTV
➜ SINGLE: play the selected file once,
then return to the menu.
screen.
2 Press 34 to select the folder and press
OK to open the folder.
Fast forward / reverse (MP3/WMA)
00:00 04:52 128Kbps
001/020
G During playback, press 12to fast forward
or reverse playback.
Coco Lee
G To resume normal playback, press PLAY/
--
PAUSE 2;.
MP3
Coco
Coco
-
-
Before
I love
MP3
MP3 Coco
MP3 Coco
MP3 Coco
-
-
-
Jazz
Hot spring
I believe
3 Press 34or use the numeric keypad
(0-9) to highlight an option.
4 Press OK to confirm.
➜ Playback will start from the selected
file to the end of the folder.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
24
01-35_DVP4080_4050_93_98_Eng
24
20/09/06, 5:35 PM
DVD Setup Menu Options
This DVD Player setup is carried out via
theTV, enabling you to customise the
DVD Player to suit your particular
requirements.
OSD Language
This menu contains various language
options for display language on the screen.
For details, see page 17.
General Setup menu
Sleep
1 In disc mode, press SETUP.
2 Press 1 2 to select ‘General Setup’.
3 Press OK to confirm.
Sleep function allows you to turn off the
DVD Player automatically after a preset
time.
1 In ‘GENERAL SETUP PAGE’, press 3 4 to
highlight {SLEEP}, then press 2.
General
Audio
Video
Preference
15 Mins
- - General Setup Page - -
Turn off the DVD Player after 15 minutes.
OSD Language
Sleep
30 Mins
Turn off the DVD Player after 30 minutes.
45 Mins
Turn off the DVD Player after 45 minutes.
60 Mins
Turn off the DVD Player after 60 minutes.
OFF
Turn off the sleep function.
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
25
01-35_DVP4080_4050_93_98_Eng
25
20/09/06, 5:35 PM
DVD Setup Menu Options
Digital Audio Setup
Audio Setup Menu
The options included in Digital Audio
Setup are:‘Digital Output’ and ‘LPCM
Output’.
1 In disc mode, press SETUP.
2 Press 1 2 to select ‘Audio Setup’.
3 Press OK to confirm.
1 In ‘AUDIO SETUP PAGE’, press 3 4 to
highlight {DIGITAL AUDIO}, then press 2.
General
Audio
Video
Preference
2 Press the 3 4 keys to highlight an option.
- - Audio Setup Page - -
3 Enter its submenu by pressing 2.
Downmix
4 Press 3 4 to select a setting, then press
Digital Audio
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜ SPDIF Off:Turn off the digital output.
➜ All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜ PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Setting the Downmix
This options allows you to set the stereo
analog output of your DVD Player.
1 In ‘AUDIO SETUP PAGE’, press 3 4 to
highlight {DOWNMIX}, then press 2.
Tip:
–
If DIGITAL OUTPUT is set to ‘All’, all
STEREO
audio settings except MUTE are invalid.
Select this to change channel output to
stereo which delivers sound from only the
two front speakers.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM’.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro-Logic decoder.
Discs are recorded at a certain sampling
rate.The higher the sampling rate, the
better the sound quality.
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
➜ 48K: Playback a disc recorded at the
sampling rate of 48kHz.
➜ 96K: Playback a disc recorded at the
sampling rate of 96kHz.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
26
01-35_DVP4080_4050_93_98_Eng
26
20/09/06, 5:35 PM
DVD Setup Menu Options
Setting theTV Display
Video Setup Menu
Set the aspect ratio of the DVD Player
according to theTV you have connected.
The format you select must be available
on the disc. If it is not, the setting forTV
display will not affect the picture during
playback.
1 In disc mode, press SETUP.
2 Press 1 2 to select ‘Video Setup’.
3 Press OK to confirm.
General
Audio
Video
Preference
1 In ‘VIDEO SETUP PAGE’, press 3 4 to
- - Video Setup Page - -
highlight {TV DISPLAY}, then press 2.
TY Type
TV Display
Progressive
Sharpness
Brightness
Contrast
2 Press 3 4 to highlight one of the options
below:
4:3 PAN SCAN –
Color
Select this if you have
a normalTV and want
both sides of the
picture to be trimmed or formatted to fit
yourTV screen.
TVType
This menu contains the options for
selecting the colour system that matches
the connectedTV. For details, see page
16.
4:3 LETTER BOX –
Select this if you have a
normalTV. In this case, a
wide picture with black
bands on the upper and lower portions of
theTV screen will
be displayed.
16:9 – Select this if
you have a wide-
screenTV.
3 Select an item and press OK.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
27
01-35_DVP4080_4050_93_98_Eng
27
20/09/06, 5:35 PM
DVD Setup Menu Options
Sharpness
Progressive - turning on/off
You can personalize your picture colour
by adjusting sharpness.
In the progressive scan mode, you can
enjoy the high quality picture with less
flickers. It only works when you have
connected the DVD player’sY Pb Pr jacks
to yourTV that supports the progressive
video input. Otherwise, a distorted
picture will appear on theTV. For proper
progressive scan set up, see page 15.
1 In ‘VIDEO SETUP PAGE’, press 3 4 to
highlight {SHARPNESS}, then press 2.
HIGH
Choose high to make the picture’s edge
sharper.
1 In ‘VIDEO SETUP PAGE’, press 3 4 to
MEDIUM
Choose medium to get a standard
highlight {PROGRESSIVE}, then press 2.
picture.
OFF
To disable Progressive Scan function.
LOW
Choose low to make the picture’s edge
softer.
ON
To enable Progressive Scan function.
2 Press 3 4 to select a setting, then press
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
OK to confirm your selection.
➜ Follow the instructions shown on the
TV to confirm the selection (if any).
➜ If a distorted picture appears on theTV
screen, wait for 15 seconds for auto
recovery.
Brightness / Contrast / Color
Increasing the value will brighten the
picture or vice versa. Choose zero (0) for
average setting.
1 In ‘VIDEO SETUP PAGE’, press 3 4 to
highlight {BRIGHTNESS}, {CONTRAST}
or {COLOR}, then press 2.
➜ The menu appears.
Brightness
Contrast
0
0
Color
0
2 Press 1 2 to adjust the setting that best
suit your personal preference.
3 Press OK to confirm.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
28
01-35_DVP4080_4050_93_98_Eng
28
20/09/06, 5:35 PM
DVD Setup Menu Options
Preference Page
Restricting playback by Parental
Control
1 Press Ç twice to stop playback (if any),
Some DVDs may have a parental level
assigned to the complete disc or to
certain scenes on the disc. This feature
lets you set a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playing of certain discs that are not
suitable for your children or have certain
discs played with alternative scenes.
then press SETUP.
2 Press 1 2 to select the‘Preference Page’.
3 Press OK to confirm.
General
Audio
Video
Preference
- - Preference Page - -
Audio
1 In ‘PREFERENCE PAGE’, press 3 4 to
Subtitle
Disc Menu
Parental
Password
Default
highlight {PARENTAL}, then press 2.
General
Audio
Video
Preference
- - Preference Page - -
Audio
1 KID SAFE
2 G
Subtitle
Disc Menu
Parental
Password
Default
3 PG
4 PG 13
5 PGR
6 R
Audio, Subtitle, Disc Menu
7 NC17
8 ADULT
These menus contain various language
options for audio, subtitle and disc menu
which may be recorded on the DVD. For
details, see page 17.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
29
01-35_DVP4080_4050_93_98_Eng
29
20/09/06, 5:35 PM
DVD Setup Menu Options
Rating explanations
Restricting playback by Parental
Control
1 KID SAFE
– Kids material; recommended especially for
children and viewers of all ages.
2 Press 3 4 to highlight a rating level for
the disc inserted and press OK.
➜ To disable Parental controls and have
all Discs play, select {8 ADULT}.
2 G
– General Audience; recommended as
acceptable for viewers of all ages.
3 Use the numeric keypad (0-9) to enter
the six-digit password (see page 31
“Changing the password”).
3 PG
– Parental Guidance suggested.
➜ DVDs that are rated above the level
you selected will not play unless you enter
your six-digit password.
4 PG13
– Material is unsuitable for children under age
13.
5-6 PG-R
Tips:
– Parental Guidance - Restricted;
recommended that parents restrict children
under 17 from viewing or allow to view only
when supervised by a parent or adult guardian.
–
VCD, SVCD, CD have no level indication,
so parental control function has no effect on
these type of discs.This applies to most illegal
DVD discs.
7 NC17
– No children under age 17; not
recommended viewing for children under age
17.
–
Some DVDs are not encoded with a
rating though the movie rating may be
printed on the Disc cover. The rating level
feature does not work for such Discs.
8 ADULT
– Mature material; should be viewed only by
adults due to graphic sexual material, violence
or language.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
30
01-35_DVP4080_4050_93_98_Eng
30
20/09/06, 5:35 PM
DVD Setup Menu Options
Changing the Password
Restoring to original settings
The same password is used for both
Parental Control and Disc Lock. Enter
your six-digit password when prompted
on the screen. The default password is
136900.
Setting the DEFAULT function will reset
all options and your personal settings to
the factory defaults, except your
password for Parental Control and Disc
Lock.
1 In ‘PREFERENCE PAGE’, press 3 4 to
highlight {PASSWORD}, then press 2 to
select {CHANGE}.
1 In ‘PREFERENCE PAGE’, press 34 to
highlight {DEFAULT}, then press 2 to
select {RESET}.
2 Press OK to confirm.
➜ All settings will now reset to factory
defaults.
General
Audio
Video
Preference
Old Password
New Password
Confirm PWD
OK
2 Use the numeric keypad (0-9) to enter
your old six-digit password.
➜ When doing this for the first time, key
in ‘136900’.
➜ If you forget your old six-digit
password, key in ‘136900’.
3 Enter the new six-digit password.
4 Enter the new six-digit password a second
time to confirm.
➜ The new six-digit password will now
take effect.
5 Press OK to confirm.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
31
01-35_DVP4080_4050_93_98_Eng
31
20/09/06, 5:35 PM
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem
Solution
No power
– Check if the AC power cord is properly connected.
– Press the STANDBY ON on the front of the DVD
system to turn on the power.
No picture
– Refer to yourTV’s manual for correctVideo In
channel selection. Change theTV channel until you
see the DVD screen.
– Check if theTV is switched on.
– If the progressive scan feature is activated but the
connectedTV does not support progressive signals
or the cables are not connected accordingly, see
page 15 for proper progressive scan set up or
deactivate the progressive scan feature as below:
1) Turn off yourTV progressive scan mode or turn on
to interlaced mode.
2) Press OPEN/CLOSE to open the disc tray.
3) Press numeric keypad ‘1’ on the remote control for
few seconds.
Distorted picture
– Sometimes a small amount of picture distortion may
appear depending on the disc being played back.This
is not a malfunction.
Completely distorted picture or
black/white picture with DVD
– Connect DVD Player directly to theTV.
– Make sure the disc is compatible with the DVD/
Player.
– Ensure that the DVD Player’sTVType is set to match
that of the Disc and yourTV.
No sound or distorted sound
No audio at digital output
– Adjust the volume.
– Check that the speakers are connected correctly.
– Check the digital connections.
– Check if your receiver can decode MPEG-2 and if
not, please make sure the digital output is set to
PCM.
– Check if the audio format of the selected audio
language matches your receiver capabilities.
32
01-35_DVP4080_4050_93_98_Eng
32
20/09/06, 5:35 PM
Troubleshooting
Problem
Solution
Disc can’t be played
– The DVD+R/CD-R must be finalised.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– If you have recorded a Picture CD or MP3 CD
yourself, ensure that your disc contains at least 10
pictures or 5 MP3 tracks.
– Region code incorrect.
Picture freezes momentarily
during playback
– Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from centre to edge.
No return to start-up screen when
disc is removed
– Reset the unit by switching the player off, then on
again.
The player does not respond to
the Remote Control
– Aim the Remote Control directly at the sensor
on the front of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–
signs) as indicated.
Buttons do not work
– To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
Player does not respond to some
operating commands during playback.
– Operations may not be permitted by the disc.
Refer to the instructions of the disc jacket.
DVD Player cannot read
CDs/DVDs
– Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD Player for
repair.
Menu items cannot be selected
– Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items
cannot be selected.
33
01-35_DVP4080_4050_93_98_Eng
33
21/09/06, 10:15 AM
Specifications
AUDIO PERFORMANCE
TV STANDARD (PAL/50Hz) (NTSC/60Hz)
DA Converter
DVD
24 bit, 192 kHz
Number of lines
Playback
625
525
fs 96 kHz
fs 48 kHz
fs 48 kHz
fs 44.1kHz
fs 44.1kHz
4Hz- 44kHz
4Hz- 22kHz
4Hz- 22kHz
4Hz- 20kHz
4Hz- 20kHz
> 90 dB
Multistandard (PAL/NTSC)
SVCD
VIDEO PERFORMANCE
Video DAC
YPbPr
Video Output
12 bit, 108 MHz
0.7Vpp — 75 ohm
1Vpp — 75 ohm
CD/VCD
Signal-Noise (1kHz)
Dynamic range(1kHz)
Crosstalk (1kHz)
> 80 dB
> 70 dB
Distortion/noise (1kHz)
> 65 dB
VIDEO FORMAT
Digital Compression MPEG 2 for DVD,SVCD
MPEG 1 forVCD
MPEG MP3
MPEG Audio L3
CONNECTIONS
YPbPr Output
Cinch 3x
DVD
Horiz. resolution
Vertical resolution
50Hz
720 pixels
576 lines
60Hz
720 pixels
480 lines
Video Output
Cinch (yellow)
Audio Output(L+R) Cinch (white/red)
Digital Output
1 coaxial
VCD
Horiz. resolution
Vertical resolution
50Hz
352 pixels
288 lines
60Hz
352 pixels
240 lines
IEC60958 for CDDA / LPCM
IEC61937 for MPEG 1/2,
Dolby Digital
AUDIO FORMAT
CABINET
Dimensions (w x h x d)
Weight
Digital
MPEG/ AC-3/ compressed Digital
226 x 48 x 209 mm
Approximately 0.8 kg
PCM
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
MP3(ISO 9660) 96, 112, 128, 256
kbps & variable
POWER CONSUMPTION
Power Supply Rating
bit rate fs, 32, 44.1,
48 kHz
110-240V;
50/60Hz
< 10W
Analog Sound Stereo
Dolby Surround compatible downmix from Dolby Digital
multi-channel sound
Power consumption
Power consumption in Standby mode < 0.8W
Specifications subject to change without prior notice
34
01-35_DVP4080_4050_93_98_Eng
34
20/09/06, 5:35 PM
Glossary
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital sound has
specific numerical values. These jacks send audio
through two channels, the left and right.
Multichannel: DVD is specified to have each sound
track constitute one sound field. Multichannel refers
to a structure of sound tracks having three or more
channels.
Aspect ratio: The ratio of vertical and horizontal
sizes of a displayed image.The horizontal vs. vertical
ratio of conventionalTVs. is 4:3, and that of wide-
screens is 16:9.
AUDIO OUT Jacks: Jacks on the back of the DVD
System that send audio to another system (TV, Stereo,
etc.).
Bit Rate: The amount of data used to hold a given
length of music; measured in kilobits per seconds, or
kbps. Or, the speed at which you record. Generally,
the higher the bit rate, or the higher the recording
speed, the better the sound quality. However, higher
bit rates use more space on a Disc.
Chapter: Sections of a picture or a music piece on a
DVD that are smaller than titles. A title is composed
of several chapters. Each chapter is assigned a chapter
number enabling you to locate the chapter you want.
ComponentVideo Out Jacks: Jacks on the back of
the DVD System that send high-quality video to aTV
that has ComponentVideo In jacks (R/G/B, Y/Pb/Pr,
etc.).
Parental Control: A function of the DVD to limit
playback of the disc by the age of the users according
to the limitation level in each country. The limitation
varies from disc to disc; when it is activated, playback
will be prohibited if the software’s level is higher than
the user-set level.
PCM (Pulse Code Modulation): A system for
converting analog sound signal to digital signal for
later processing, with no data compression used in
conversion.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for controlling
reproduction. By using menu screens recorded on a
Video CD or SVCD that supports PBC, you can enjoy
interactive-type software as well as software having a
search function.
Progressive Scan: It displays all the horizontal lines
of a picture at one time, as a signal frame. This system
can convert the interlaced video from DVD into
progressive format for connection to a progressive
display. It dramatically increases the vertical
resolution.
Disc menu: A screen display prepared for allowing
selection of images, sounds, subtitles, multi-angles, etc
recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when you
use the DIGITAL AUDIO OUT COAXIAL or
OPTICAL jacks.These jacks send audio through
multiple channels, instead of just two channels as
Region code: A system for allowing discs to be
played back only in the region designated beforehand.
This unit will only play discs that have compatible
region codes. You can find the region code of your
unit by looking on the product label. Some discs are
compatible with more than one region (or ALL
regions).
Surround: A system for creating realistic three-
dimensional sound fields full of realism by arranging
multiple speakers around the listener.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or the
entire album in audio software. Each title is assigned a
title number enabling you to locate the title you want.
VIDEO OUT jack: Jack on the back of the DVD
System that sends video to aTV.
analog does.
Dolby Digital: A surround sound system developed
by Dolby Laboratories containing up to six channels
of digital audio (front left and right, surround left and
right, center and subwoofer).
JPEG: A very common digital still picture format.A
still-picture data compression system proposed by the
Joint Photographic Expert Group, which features small
decrease in image quality in spite of its high
compression ratio.
MP3: A file format with a sound data compression
system.“MP3” is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. By using
MP3 format. one CD-R or CD-RW can contain about
10 times as much data volume as a regular CD can.
35
01-35_DVP4080_4050_93_98_Eng
35
20/09/06, 5:35 PM
|