Rwegwistewr yo.uprhproildiupctsan.dcgoetmsup/pworteatlcome
DVP3326
EN User manual
Disposal of your old product and
batteries
1 Important
Safety and important notice
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Warning
• Risk of overheating! Never install the product in a
conꢀned space.Always leave a space of at least 4 inches
around the product for ventilation. Ensure curtains or
other objects never cover the ventilation slots on the
product.
• Never place the product, remote control or batteries
near naked ꢁames or other heat sources, including
direct sunlight.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
• Only use this product indoors. Keep this product away
from water, moisture and liquid-ꢀlled objects.
• Never place this product on other electrical equipment.
• Keep away from this product during lightning storms.
• Where the mains plug or an appliance coupler is used
as the disconnect device, the disconnect device shall
remain readily operable.
• Visible and invisible laser radiation when open.Avoid
exposure to beam.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements of
the following directives and guidelines: 2006/95/
EC, 2004/108/EC.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
About Progressive Scan
Consumers should note that not all high
deꢀnition television sets are fully compatible
with this product and may cause artifacts to
be displayed in the picture. In case of 525
or 625 progressive scan picture problems,
it is recommended that the user switch the
connection to the ‘standard deꢀnition’ output.
If there are questions regarding ourTV set
compatibility with this model 525p and 625p
DVD player, please contact our customer
service center.
4
EN
Copyright notice
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorised by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorised by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Trademark notice
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
CLASS 1
LASER PRODUCT
EN
5
Product overview
2 Your DVD
player
Main unit
Congratulations on your purchase, and
welcome to Philips!To fully beneꢀt from the
support that Philips offers, register your product
6
Feature highlights
a
(Standby-On)
•
Turn on the DVD player or switch to
standby mode.
Screen Fit
View the movie in full screen display on anyTV.
Progressive scan video
b Disc compartment
Push the limits of standard resolution and
provide a more ꢀlm-like DVD video display on
aTV screen.
c Display panel
d
e
f
(Open/Close)
USB link
•
•
•
Open or close the disc compartment.
Plug a USB ꢁash drive to the USB jack to enjoy
the MP3/WMA/JPEG ꢀles.
(Play/Pause)
Start, pause or resume disc play.
Create MP3 ꢀles
Convert audio tracks from an audio CD into
MP3 format.The created MP3 ꢀles are saved in
the USB ꢁash drive.
(USB) jack
Connect a USB ꢁash drive.
Region codes
You can play discs with the following region
codes.
DVD region code
Countries
India
6
EN
c DISC MENU
Remote control
•
•
•
Access or exit the disc menu.
Switch to the disc mode.
ForVCD and SVCD, turn on or off
PBC (playback control).
a
d
b
c
•
•
Navigate the menus.
Search fast-forward ( ) or fast-
backward ( ).
Search slow-forward ( ) or slow-
backward ( ).
r
•
d
e
f
BACK
•
•
Return to the previous display menu.
q
p
/
Skip to the previous or next title,
chapter, or track.
e
f
g
g
•
Switch to the USB mode.
o
n
h Numeric buttons
•
Select an item to play.
i SUBTITLE
•
Select a subtitle language on a disc.
j
ZOOM
h
•
•
Fit the piture display to theTV screen.
Zoom the picture in or out.
m
l
k
i
j
k VOLUME
Display the current volume level and
•
use ( ) or ( ) navigation buttons to
set the volume level between 0 ~ 20.
l REPEAT/REPEAT A-B
•
•
Select or turn off repeat mode.
Repeat play for a speciꢀc section.
m AUDIO/CREATE MP3
•
Select an audio language or channel
a
on a disc.
•
•
Turn on the unit or switch to standby.
•
Access the menu of creating MP3 ꢀles.
b
n
o
Open or close the disc compartment.
•
•
Stop play.
Start, pause or resume disc play.
EN
7
p
INFO
For discs, access the play options or
display the current disc status.
For slideshows, display a thumbnail
view of photo ꢀles.
•
•
q OK
•
Conꢀrm an entry or selection.
r SETUP
•
Access or exit the setup menu.
8
EN
Note
3 Connect
• You must connect this product directly to aTV.
Make the following connections to use this
product.
Option 1: Connect to component
video jacks
Basic connections:
•
•
Video
Audio
Pb
Optional connections:
•
Route audio to other devices:
Pr
Pb
Y
Y
Pr
COMPONENT
VIDEO IN
COMPONENT VIDEO OUT
•
•
•
Multi channel receiver
Digital ampliꢀer/receiver
Analog stereo system
•
USB device
1 Connect the component video cables (not
Note
supplied) to:
•
•
the Y Pb Pr jacks on this product.
the COMPONENTVIDEO input jacks
on theTV.
• Refer to the type plate at the back or bottom of the
product for identiꢀcation and supply ratings.
• Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Tip
• The component video input jacks on theTV may be
labeled asY Pb/Cb Pr/Cr orYUV.
• This type of connection provides good picture quality.
Tip
• Different types of connectors may be used to connect
this product to yourTV, depending on availability and
your needs.A comprehensive interactive guide to
help you connect your product is available at www.
connectivityguide.philips.com.
Option 2: Connect to video (CVBS)
jack
VIDEO IN
Connect video cables
Connect this product toTV to view disc play.
Select the best video connection thatTV can
support.
•
Option 1: Connect to component video
jacks (for a standardTV or Progressive
ScanTV).
Option 2: Connect to video (CVBS) jack
(for a standardTV).
1 Connect a composite video cable (not
supplied) to:
•
•
the TV OUT jack on this product.
the video input jack on theTV.
•
EN
9
Connect multi channel receiver
Tip
• The video input jack on theTV may be labeled as A/V
IN,VIDEO IN, COMPOSITE or BASEBAND.
• This type of connection provides standard picture
quality.
ONT L
ONT R
ENTER
EAR L
EAR R BWOOFER
MULTICHANNEL
AUDIO IN
Connect audio cables
AUDIO IN
1 Connect the audio cables (not supplied)
to the AUDIO OUT (FRONT L/R, REAR
L/R, CENTER and SUBWOOFER) jacks
on this DVD player and the audio input
jacks on the device.
Connect the audio from this product to theTV
to allow sound output through theTV.
1 Connect the audio cables (supplied) to:
•
•
the AUDIO OUTFRONT L/R jacks
on this product.
the audio input jacks on theTV.
Tip
• You can optimize the audio output (see chapter ‘Adjust
settings’ - [Audio Setup] > [Audio Output] for details.
Route audio to other devices
Route the audio from this product to other
devices to enhance audio play.
Connect to digital ampliꢀer/receiver
DIGITAL IN
DIGITAL
OUT
COAXIAL
1 Connect a coaxial cable (not supplied) to:
•
•
the COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on
the device.
10 EN
Connect analogue stereo system
Connect power
AUDIO IN
Caution
FRONT L
FRONT R
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
• Before connecting the AC power cord, ensure you have
completed all other connections.
1 Connect the audio cables (supplied) to:
•
•
the AUDIO OUTFRONT L/R jacks
on this product.
Note
the audio input jacks on theTV.
• The type plate is located on the back of the product.
1 Connect the AC power cable to the wall
Connect USB device
socket.
» The player is ready to be set up for
use.
1 Connect a USB ꢁash drive to the
jack
on this product.
Note
• This product can only play/view MP3,WMA, or JPEG
ꢀles that are stored on a USB ꢁash drive.
• Press the
button to access the content and play
the ꢀles.
EN 11
Select menu display language
4 Get started
General Setup
Prepare the remote control
Disc Lock
English
OSD Language
Sleep Timer
Auto Standby
1 Open the battery compartment.
•
The language options may vary from
different regions.
2 Insert two R03 or AAA batteries with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
1 Press SETUP.
» [General Setup] menu is displayed.
2 Select [OSD Language], then press .
Caution
3 Press
to select a language, then press
OK.
• Remove batteries if they are exhausted or if the
remote control is not to be used for a long time.
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Batteries contain chemical substances, so they should
Turn on progressive scan
be disposed of properly.
Note
• To use the progressive scan feature, you must connect
a progressive scanTV with the component video jacks
(see “Connect” > “Connect video cables” > “Option 1:
Connect to the component video jacks” for details).
Find the correct viewing
channel
1 Press to turn on this product.
2 Turn on theTV and switch to the correct
video-in channel. (Refer to theTV user
manual on how to select the correct
channel.)
Video Setup
TV System
On
TV Display
Off
Progressive
Picture Setting
12 EN
1 Turn on theTV to the correct viewing
channel for this product.
2 Press SETUP.
3 Press to select [Video Setup].
4 Select [Progressive] > [On], then press
OK.
» A warning message is displayed.
5 To proceed, select [Ok] and press OK.
» The progressive setup is complete.
Note
• If a blank/distorted screen is displayed, wait for 15
seconds for the auto recovery.
• If no picture is displayed, turn off the progressive scan
mode as follows:
• 1) Press to open the disc compartment.
• 2) Press the Numeric button ‘1’.
6 Press SETUP to exit the menu.
7 You can now turn on the progressive scan
mode on theTV (see theTV user manual).
Note
• During play, when the progressive scan mode is on for
both this product and theTV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and theTV.
EN 13
Play video
5 Play
Note
Play a disc
• Some operations may not work with some discs. See
the information accompanying the disc for details.
Caution
• Do not place any objects other than discs into the disc
compartment.
• Do not touch the disc optical lens inside the disc
Control video play
compartment.
1 Play a title.
2 Use the remote control to control the play.
1 Press to open the disc compartment.
2 Insert a disc with its label facing up.
Button
Action
Start, pause or resume disc play.
Stop disc play.
3 Press to close the disc compartment and
start disc play.
•
To view disc play, turn on theTV to
the correct viewing channel for this
product.
,
Skip to a previous/next title or
chapter.
,
Search fast-backward or fast-
forward. Press repeatedly to
change the search speed.
Search slow-forward or slow-
backward. Press repeatedly to
change the search speed.
ForVCD/SVCD, slow-backward
search is not available.
•
To stop disc play, press
.
,
Note
• Check the types of discs supported (see
“Speciꢀcations” > “Play media”).
• If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preferences” > [Parental
Control]).
• If you pause or stop a disc, the screen saver appears
after 5 minutes of inactivity.To deactivate the screen
saver, press DISC MENU.
• After you pause or stop a disc and no button is pressed
within 15 minutes, this product automatically switches
to standby.
AUDIO/ Select an audio language or
CREATE channel available on a disc.
MP3
SUBTITLE Select a subtitle language available
on a disc.
Select or turn off repeat mode.
Repeat play for a speciꢀc section.
ZOOM Fit the picture format to theTV
screen.
Press repeatedly until the image is
scaled to ꢀt to theTV screen.
ZOOM Toggle between screen aspect
ratio and different zoom factor.
To pan through the zoomed
image, press the Navigation
buttons.
INFO Access the play options and
display the current disc status.
14 EN
Access DVD menu
Skip play to a speciꢀc time
1 Press DISC MENU to access the disc root
1 During play, press INFO.
menu.
» The disc status menu is displayed.
2 Select a play option, then press OK.
2 Select an option for the current elapsed
•
In some menus, press the Numeric
playing time, then press
.
buttons to input your selection.
•
•
•
•
[TTTime] (title time)
[CHTime] (chapter time)
[DiscTime] (disc time)
[TrackTime] (track time)
AccessVCD menu
The PBC (playback control) feature is available
forVCD/SVCD, which can display the contents
menu for you to select a play option.The PBC is
on by default in the factory.
3 Press the Numeric buttons to enter the
time to skip to, then press OK.
Display play time
Note
1 During play, press INFO.
» The disc status menu is displayed.
• See “Adjust settings” > [Preferences] > [PBC] on how
to turn PBC on or off.
2 Select [Time Disp.], then press
.
» The display options vary from disc
type.
1 Display the contents menu via one of the
following ways:
3 Select an option, then press OK.
•
•
If PBC is on, load in aVCD/SVCD.
During play with PBC on, press
BACK.
View DVD play from different angles
2 Press the Numeric buttons to select a play
1 During play, press INFO.
option, then press OK to start play.
» The disc status menu is displayed.
•
If PBC is turned off, it skips the menu
display and starts play from the ꢀrst
track.
2 Select [Angle], then press .
3 Press the Numeric buttons to change the
angle.
» Play changes to the selected angle.
Preview disc contents
1 During play, press INFO.
Note
» The disc status menu is displayed.
• Applicable only to discs contain multi-angle scenes.
2 Select [Preview], then press
.
3 Select a preview option, then press OK.
» A thumbnails preview screen is
displayed.
Repeat play a speciꢀc section
•
To go to the next/previous prview
screen, select [Prev] or [Next], then
press OK.
1 During play, press REPEAT/REPEAT A-B at
the start point.
2 Press REPEAT/REPEAT A-B again to set
•
To start play, press OK at the selected
thumbnail picture.
the end point.
» Repeat play starts.
EN 15
Display
[Disc GoTo]
Action
3 To cancel repeat play, press
REPEAT/REPEAT A-B again.
Skip play to a speciꢀc
time within the disc.
Skip play to a speciꢀc
time within a track.
Skip play to a speciꢀc
track number.
[Track GoTo]
[SelectTrack]
Note
• The marked section for repeat play is only possible
within a track/title.
2 Press the numeric buttons to change the
time/number to skip to.
Play music
Play MP3/WMA music
MP3/WMA is a type of highly compressed
audio ꢀle (ꢀles with .mp3, .wma extensions).
Control a track
1 Play a track.
2 Use the remote control to control the play.
1 Insert a disc or USB that contains the MP3/
WMA music.
Button
Action
Start, pause or resume
disc play.
Stop disc play.
Skip to a previous/next
track.
•
•
For USB, press
A contents menu is displayed.
.
2 If play does not automatically start, select a
track to play.
,
•
To select another track/folder, press
, then press OK.
Select an item to play.
Note
• For disc recorded in multiple sessions, only the ꢀrst
session is played.
• For a WMA ꢀle that is protected by Digital Rights
Management (DRM), it cannot be played on this
product.
,
Searches fast-backward
or fast-forward. Press
repeatedly to change the
search speed.
Select or turn off repeat
mode.
• This product does not support MP3PRO audio format.
• For any special character that is present in the MP3
track name (ID3) or album name, it might not be
displayed correctly on the screen because these
characters are not supported.
Repeat play for a speciꢀc
section.
• Folders/ꢀles that exceed the supported limit of this
product cannot be displayed or played.
Quick skip play
1 During play, press INFO repeatedly to
Play photo
select an option.
Play photo as slideshow
You can play JPEG photos (ꢀles with .jpeg or
.jpg extensions).
16 EN
Play musical slideshow
Create a musical slideshow to play MP3/WMA
music ꢀles and JPEG photo ꢀles simultaneously.
1 Insert a disc or USB that contains the JPEG
photos.
» Slideshow begins (for Kodak disc), or
a contents menu (for JPEG disc) is
displayed.
Note
2 Select a photo folder, then press OK to
• To create a musical slideshow, you must store the MP3/
WMA and JPEG ꢀles on the same disc/USB device.
start slideshow.
•
•
•
•
To preview the photos in thumbnail,
press INFO.
To select a photo, press the
Navigation buttons.
1 Play MP3/WMA music.
2 Press
BACK to return to the main
To enlarge the selected photo and
start slideshow, press OK.
To return to the menu, press
BACK.
menu.
3 Navigate to the photo folder/album and
press OK to start slideshow play.
» Slideshow begins and continues till the
end of the photo folder or album.
Note
» Audio continues to play until the end
of the disc.
• It may require longer time to display the disc content
on theTV due to the large number of songs/photos
compiled onto one disc/USB device.
• If the JPEG photo is not recorded with an ‘exif’ type
ꢀle, the actual thumbnail picture cannot be shown on
the screen. It is replaced by a ‘blue mountain’ thumbnail
picture.
•
•
To stop slideshow play, press
To stop music play, press again.
.
• This player can only display digital camera pictures
according to the JPEG-EXIF format, typically used by
almost all digital cameras. It cannot display Motion JPEG,
or pictures in formats other than JPEG, or sound clips
associated with pictures.
Play from USB device
This product plays/views MP3,WMA, or JPEG
ꢀles that are stored on a USB device.
• Folders/ꢀles that exceed the supported limit of this
1 Connect a USB ꢁash drive to the
jack
player cannot be displayed or played.
on this product.
2 Press the
button.
» A contents menu is displayed.
Control photo play
3 If play does not start automatically, select a
1 Play a photo slideshow.
ꢀle to play.
•
For more information, see the
chapters “Play music”,“Play photo”
and “Play video” for details.
2 Use the remote control to control the play.
Button
Action
/
Rotate a photo anti-clockwise/
clockwise.
4 To stop play, press
.
•
To switch to the disc mode, press the
button.
/
Rotate a photo horizontally/
vertically.
ZOOM
Zoom in or out of a photo.
Play pauses in zoom mode.
Stop a play.
EN 17
7 Select an audio track, then press OK.
6 Advanced
features
•
•
To select another track, repeat step 7.
To select all tracks, select [Select All]
in the menu, and press OK.
•
To deselect all tracks, select [Deselect
all] in the menu, and press OK.
Create MP3 ꢀles
8 Select [Start] in the menu, then press OK
to start to convert.
With this disc player, you can convert audio
CDs into MP3 audio ꢀles.The created MP3
audio ꢀles are saved in the USB device.
» Once complete, a new folder is
created automatically in the USB
device to store all the new MP3 ꢀles.
1 Insert an audio CD.
•
To exit the menu, select [Exit], then
press OK.
2 Connect a USB ꢁash drive to the
jack
on this product.
3 During disc play, press AUDIO/CREATE
Note
MP3.
• When you convert, never press any button.
• DTS CDs and copy-protected CDs cannot be
converted.
» The MP3 creation menu is displayed.
4 Select [Yes] in the menu, then press OK.
• Writer-protected or password-protected USB devices
cannot be used to store MP3 ꢀles.
Create MP3
TRACK
OPTIONS
Track01
04:14
04:17
03:58
04:51
03:53
04:09
04:38
Speed
Normal
128kbps
Yes
Track02
Track03
Track04
Track05
Track06
Track07
Bitrate
CRT ID3
Device
USB 1
Summary
Press [OK] button
to change speed.
Select all
Start
Exit
Deselect all
5 Select a conversion option in the
[OPTIONS] panel, then press OK
repeatedly to select an item.
Option
Description
[Speed]
[Bitrate]
Select a copying speed.
Select a quality level.
Higher bitrate for better sound
quality and bigger ꢀle size.
[CRT ID3] Copy track information into the
MP3 ꢀle.
[Device]
The createed ꢀles can only be
saved in a USB device.
6 Press to access the [Track] panel.
18 EN
Tip
7 Adjust settings
• You can set or change the password, go to
[Preferences] > [Password].
[OSD Language]
Note
Select an on-screen menu language.
[SleepTimer]
• If the setup option is grayed out, it means the setting
cannot be changed at the current state.
Switch automatically to standby at the preset
time.
•
•
[Off] - Disable sleep mode.
[15 mins], [30 mins], [45 mins], [60
mins] -Select the count down time for
this product to switch to standby.
General setup
[Auto Standby]
General Setup
Turn on or off automatically standby.
•
[On] - Switch to standby 15 minutes
of inactivity (for example, in pause or
stop mode).
[Off] - Disable the auto standby
mode.
Disc Lock
OSD Language
Sleep Timer
Auto Standby
•
Audio setup
1 Press SETUP.
Audio Setup
» [General Setup] menu is displayed.
Analogue Output
Digital Audio
2 Press
.
Volume
3 Select an option, then press OK.
Sound Mode
Speaker Setup
CD Upsampling
Night Mode
4 Select a setting, then press OK.
•
•
To return to the previous menu, press
.
To exit the menu, press SETUP.
[Disc Lock]
Set play restriction for a disc which is loaded in
the disc compartment (maximum 20 discs can
be locked).
1 Press SETUP.
» [General Setup] menu is displayed.
•
•
[Lock] - Restrict access to the current
disc.The next time you want to play
this disc or unlock it, you need to
enter the password.
2 Press to select [Audio Setup], then press
.
3 Select an option, then press OK.
[Unlock] - Play all discs.
4 Select a setting, then press OK.
•
•
To return to the previous menu, press
.
To exit the menu, press SETUP.
EN 19
[Analogue Output]
•
•
[Movie Mode] - Select a sound effect for
movies.
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
[Music Mode] - Select a sound effect for
music.
[Speaker Setup]
•
•
[Stereo] - For stereo output.
[LT/RT] - For surround sound output
through two speakers.
Optimizes surround output for the connected
speakers system.
•
[Front Speaker]
[Digital Audio]
Select a digital setting based on the digital
ampliꢀer/receiver that is connected through the
digital jack (coaxial/digital).
Option
[Large]
Description
Produces low frequency signal
below 120 Hz.
Cannot produce low frequency
signal below 120 Hz.
•
[Digital Output] - Select a type of digital
[Small]
output.
•
•
[Off] - Disable digital output.
[All] - Support multi-channel audio
formats.
[PCM Only] - Downmix to two-
channel audio format.
•
[Centre Speaker] / [Rear Speaker]
Option
[Large]
Description
Produces low frequency signal
below 120 Hz.
Cannot produce low frequency
signal below 120 Hz.
•
•
[LPCM Output] - Select the LPCM (Linear
Pulse Code Modulation) output sampling
rate.
[Small]
[Off]
•
[48kHz] - For discs recorded at
sampling rate of 48 kHz.
No speaker is connected.
•
[96kHz] - For discs recorded at
sampling rate of 96 kHz.
•
[Subwoofer]
Option
[On]
[Off]
Description
A subwoofer is connected.
No subwoofer is connected.
Note
• [LPCM Output] setting is only available if the [Digital
Output] is set to [PCM Only].
•
[SpeakersVolume] – Sets the volume level
of each speaker to get the ideal audio
balance.
• The higher the sampling rate, the better the sound
quality.
[Volume]
Press OK.
Set the default volume level when you play a
disc.
Select a speaker, then press
to adjust the
volume.
Press OK to conꢀrm and exit.
1. Press OK.
2. Press
3. Press OK to conꢀrm and exit.
to set the volume.
•
[Speakers Delay] – Sets the delay time for
the center and rear speakers if they are
placed closer to the listening position, so
that the sound output from all speakers
reach the listening position at the same
time.
[Sound Mode]
Select a preset sound effect to enhance the
audio output.
•
[3D] - Select a virtual surround sound
effect that is produced from the left and
right audio channels.
20 EN
Press OK.
3 Select an option, then press OK.
Select a speaker, then press
delay time.
to set the
4 Select a setting, then press OK.
•
•
To return to the previous menu, press
Press OK to conꢀrm and exit.
.
To exit the menu, press SETUP.
[TV System]
[CD Upsampling]
For better sound quality in stereo mode,
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting forTVs in your country.
convert the music CD to a higher sampling rate.
•
•
[Off] -Turn off CD-upsampling.
[88.2kHz (X2)] - Convert to twice the
original sampling rate.
[176.4kHz(X4)] - Convert to four times
the original sampling rate.
•
•
[PAL] - For PAL-systemTV.
[Multi] - ForTV that is compatible with
both PAL and NTSC.
•
•
[NTSC] - For NTSC-systemTV.
[Night Mode]
[TV Display]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
Select a display format:
•
•
[On] – Enjoy quiet viewing at night.
[Off] – Enjoy surround sound with a full
dynamic range.
•
•
[4:3 Pan Scan] - For 4:3 screenTV: full-
height display with the trimmed sides.
[4:3 Letter Box] - For 4:3 screenTV: wide-
screen display with black bars on the top
and bottom of the screen.
[16:9] - For wide-screenTV: display ratio
16:9.
Note
• Applicable only to Dolby Digital encoded DVD.
•
[Progressive]
If a progressive scanTV is connected to this
product, turn on the progressive scan mode.
•
•
Video setup
[On] -Turn on progressive scan.
[Off] -Turn off progressive scan mode.
Video Setup
TV System
TV Display
Progressive
Note
• For more detailed description, see “Get started” >
“Turn on progressive scan”.
Picture Setting
[Picture Setting]
Select a predeꢀned set of picture color settings
or customize the personal setting.
•
•
•
[Standard] - Original color setting.
[Bright] -Vibrant color setting.
[Soft] - Warm color setting.
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press to select [Video Setup], then press
.
EN 21
•
[Personal] - Customize the color setting.
Set the level of brightness, contrast, tint
and color saturation, then press OK.
Note
• If the language you have set is not available on the disc,
the disc uses its own default language.
• For some DVDs, the subtitle/audio language can only
change from the disc menu.
• To select the languages that are not listed in the menu,
select [Others].Then check the Language Code list at
the back of this user manual and enter the respective
language code.
Preferences
Note
[Parental Control]
• Stop disc play before you can access to [Preferences].
Restrict access to discs that are unsuitable for
children.These types of discs must be recorded
with ratings.
1. Press OK.
Preferences
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the
password.
Audio
Subtitle
Disc Menu
Parental Control
PBC
Note
MP3/JPEG Nav
Password
• Rated DVDs above the level you set in [Parental
Control] require a password to be played.
• The ratings are country-dependent.To allow all discs to
play, select ‘8’.
• Some discs have ratings printed on them but are not
recorded with ratings.This function has no effect on
such discs.
1 Press SETUP.
» [General Setup] menu is displayed.
[PBC]
2 Press to select [Preferences], then press
Turn on or off the content menu ofVCDs/
SVCDs with PBC (playback control) feature.
.
3 Select an option, then press OK.
•
[On] - Display the index menu when you
load a disc for play.
[Off] - Skip the menu and start play from
the ꢀrst title.
4 Select a setting, then press OK.
•
To return to the previous menu, press
•
.
•
To exit the menu, press SETUP.
[MP3/JPEG Nav]
Select to display the folders or display all the
ꢀles.
[Audio]
Select an audio language for disc play.
[Subtitle]
•
•
[View Files] - Display all the ꢀles.
[View Folders] - Display the folders of
MP3/WMA ꢀles.
Select a subtitle language for disc play.
[Disc Menu]
Select a disc menu language.
[Password]
Set or change the password for locked discs
and play restricted DVDs.
22 EN
1. Press the Numeric buttons to enter
‘136900’ or the last set password at [Old
Password] ꢀeld.
2. Enter the new password at [New
Password] ꢀeld.
3. Enter the new password again at [Conꢀrm
PWD] ꢀeld.
4. Press OK to exit the menu.
Note
• If you forget the password, enter ‘136900’ before you
set a new password.
[Version Info]
Display the software version of this product.
Tip
• This information is required when you want to ꢀnd out
if a newest software version is available at the Philips
website that you may download and install on this
product.
[Default]
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental
Control] and [Password] settings.
EN 23
Care
8 Additional
information
Caution
• Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Update software
For software updates, check the current
software version of this product to compare
with the latest software (if available) at the
Philips website.
Clean discs
Wipe the disc with a micro ꢀbre cleaning cloth
from the center to the edge in a straight line
movement.
Caution
• Power supply must not be interrupted during software
upgrade.
Preferences
Disc Menu
Parental Control
PBC
MP3/JPEG Nav
Password
Version Info
Default
1 Press SETUP.
2 Select [Preferences] > [Version Info], then
press OK.
3 Write down the ꢀle name, then press
SETUP to exit the menu.
the latest software version, using the ꢀle
name for this product.
5 Refer to the upgrade instructions on the
website for more information.
Note
• Disconnect the power cord for a few seconds and
connect again to turn on the product.
24 EN
•
Vertical resolution:
9 Specifications
•
DVD: 576 pixels (50 Hz); 480 pixels
(60 Hz)
•
VCD: 288 lines (50 Hz); 240 lines (60
Hz)
Note
• Speciꢀcation and design are subject to change without
notice
Audio performance
•
•
DA converter: 24 bits, 192 kHz
Frequency response:
Accessories supplied
•
•
•
DVD: 4 Hz - 22 kHz (48 kHz); 4 Hz -
44 kHz (96 kHz)
SVCD: 4 Hz - 20 kHz (44.1 kHz); 4
Hz - 22 kHz (48 kHz)
CD/VCD: 4 Hz - 20 kHz (44.1 kHz)
•
Remote control and batteries
Play media
•
DVD-Video,Video CD/SVCD,Audio CD,
•
•
Signal-Noise (1 kHz): > 90 dB
(A-weighted)
Dynamic range (1 kHz): > 80 dB
(A-weighted)
CD-R/CD-RW, DVD+R/+RW, DVD-R/-
RW, Picture CD, MP3-CD,WMA-CD, USB
ꢁash drive
•
•
•
Crosstalk (1 kHz): > 90 dB
Distortion/noise (1 kHz): > 65 dB
MPEG MP3: MPEG Audio L3
USB
•
•
Compatibility: USB (1.1)
Class support: UMS (USB Mass Storage
Class)
Audio format
•
Digital:
TV standard
•
MPEG/AC-3/PCM: Compressed digital
•
Number of lines:
625 (PAL/50Hz); 525 (NTSC/60Hz)
Playback: Multi-standard (PAL/NTSC)
(16, 20, 24 bits fs, 44.1, 48, 96 kHz)
MP3 (ISO 9660): 96, 112, 128, 256
kbps & variable bit rate fs, 32, 44.1,
48 kHz
•
•
•
Video performance
•
•
Analog sound stereo
•
•
•
Video DAC: 14 bits, 108 MHz
Y Pb Pr: 0.7Vpp ~ 75 ohm
Video output: 1Vpp ~ 75 ohm
Dolby surround compatible downmix from
Dolby Digital multi-channel sound
Connections
Video format
•
•
•
•
Y Pb Pr output: Cinch 3x
•
Digital compression:
Video output: Cinch (yellow)
Audio output (L+R): Cinch (white/red)
Digital output:
•
•
MPEG 2: DVD/SVCD
MPEG 1:VCD
•
Horizontal resolution:
•
1 coaxial: IEC60958 for CDDA/LPCM;
IEC61937 for MPEG 1/2, Dolby Digital
•
DVD: 720 pixels (50 Hz); 720 pixels
(60 Hz)
•
VCD: 352 pixels (50 Hz); 352 pixels
(60 Hz)
EN 25
Main unit
•
Dimensions (w x h x d): 360 x 37 x 209
(mm)
•
Net Weight: approximately 1.3 kg
Power
•
Power supply rating: 110V - 240V; 50/60
Hz
•
•
Power consumption: < 10 W
Power consumption in standby mode: <
1 W
=
Laser speciꢀcation
•
Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
•
•
•
Wave length: 655 nm (DVD), 790 nm
(CD)
Output Power: 10 mW (DVD), 5 mW
(VCD/CD)
Beam divergence: 60 degrees
26 EN
Picture
No picture.
10 Troubleshooting
•
See theTVs user manual on how to select
the correct input on theTV. Change theTV
channel until you see the Philips screen.
Warning
If you have turned on the progressive scan
setting or change theTV system setting, switch
back to default mode: 1) Press to open the
disc compartment. 2) Press the Numeric
button ‘1’ (for progressive scan) or the
Numeric button’3’ (forTV system).
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, register your product
Sound
No audio output from theTV.
•
Ensure that the audio cables are connected
to the audio input of theTV.
Assign the audio input of theTV to the
corresponding video input. See theTV user
manual for details.
If you contact Philips, you will be asked for the
model and serial number of your product.The
model number and serial number are on the
back of your product.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
•
No audio output from the loudspeakers of
the audio device (stereo system/ampliꢀer/
receiver).
Main unit
The buttons on this unit do not work.
•
Ensure that the audio cables are connected
to the audio input of the audio device.
Turn on the audio device to its correct
audio input source.
•
Disconnect this product from the power
outlet for a few minutes, then connect
again.
•
No reaction to the remote control.
•
•
Connect this product to the power outlet.
Point the remote control at the IR sensor
located on the front panel of this product.
Insert the batteries correctly.
Play
The aspect ratio of the screen is not aligned
with theTV display setting.
•
•
•
The aspect ratio is ꢀxed on the disc.
Insert new batteries in the remote control.
The contents of the USB ꢁash drive cannot
be read.
•
The USB ꢁash drive format is not
compatible with the digital receiver.
The drive is formatted with a ꢀle system
which is not supported by this unit (e.g.
NTFS).
•
EN 27
Progressive scan
11 Glossary
The progressive scan displays twice the number
of frames per second than in an ordinaryTV
system. It offers higher picture resolution and
quality.
A
Aspect ratio
W
WMA
Aspect ratio refers to the length to height ratio
ofTV screens.The ratio of a standardTV is 4:3,
while the ratio of a high-deꢀnition or wideTV
is 16:9.The letter box allows you to enjoy a
picture with a wider perspective on a standard
4:3 screen.
Windows Media™ Audio. Refers to an
audio compression technology developed by
Microsoft Corporation.WMA data can be
encoded with Windows Media player version 9
or Windows Media player for Windows XP. Files
are recognized by their ꢀle extension ‘.wma.’
J
JPEG
A very common digital still picture format.A
still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in
spite of its high compression ratio. Files are
recognized by their ꢀle extension ‘.jpg’ or ‘.jpeg.’
M
MP3
A ꢀle format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3.With the MP3 format, one CD-R or
CD-RW can contain about 10 times more data
than a regular CD.
P
PBC
Playback Control.A system where you navigate
through aVideo CD/SuperVCD with on-screen
menus that are recorded onto the disc.You can
enjoy interactive playback and search.
28 EN
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa; Nyanja7889
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9072
9065
中文
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
ꢀꢁꢁꢂꢃꢄꢅꢆ
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
EN 29
Electronics
Call us onTel. No.: 1860-180-1111 (BSNL / MTNL)*
011-6600-1111 (GSM /WLL)*
* “standard call rates apply”
30 EN
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: DVP3326_94_UM_V1.1
|