Rwegwistewr yo.uprhprioldiupctsa.ncdogetmsup/psourtpatport
DVP3345VB
EN User Manual
FR Manuel d’Utilisation
ES Manual del Usuario
EN: For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S.Virgin Islands, contact
Philips Customer Care Center at 1-866-309-0846
FR: Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de
votre pays.
•
Pour obtenir de l’aide aux États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges
américaines, communiquez avec le centre de service à la clientèle Philips au : 1-866-309-0846
ES: Para obtener más información, llame al servicio de soporte al cliente de su país.
•
Para obtener asistencia en los Estados Unidos, en Canadá, Puerto Rico o en las IslasVírgenes de los
Estados Unidos, comuníquese con Centro de atención al cliente de Philips al 1-866-309-0846
Lea este manual antes de usar el product.
FR: Pour obtenir une copie électronique plus détaillée de ce manuel, allez sur www.philips.com/support
Safety Informations
3
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart / apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause
harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to
operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the device and the receiver.
3. Connect the device into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
This Class B digital apparatus complies with Canadian ICES-003.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire
or the like.
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT. This apparatus employs a laser.
Only a qualified service person should remove the cover or attempt to service this apparatus,
due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
EN - 3
Safety Information (cont’d)
4
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates copy
protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
Never use a gas duster on this unit.
The gas trapped inside of this unit may cause ignition and explosion.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided. Make sure to leave a space of 7.8 inches (20cm) or more around this apparatus.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit. Depending
on your external devices, noise or disturbance in the picture and/or sound may be generated if the unit is placed too
close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few hours
until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Notice for Progressive Scan Use
Consumers should note that not all high definition television sets are fully compatible with this product and may cause
artifacts to be displayed in the picture.In case of picture problems with 525 (480) progressive scan output, it is
recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your
TV set compatibility with this 525p (480p) DVD player, please contact our customer service center.
Maintenance
Servicing
• Please refer to relevant topics on “Helpful Hints” on pages 59-61 before returning the product.
• If you need to call a customer service representative, please know the model number and serial number of your product
before you call. This information is displayed on the back of the product. Also, please take a moment to identify the
problem you are having, and be prepared to explain this to the representative. If you believe the representative will need
to help you with operations, please stay near the product. Our representatives will be happy to assist you. For online
reference, please visit our website at www.philips.com/support
Cleaning the Cabinet
• Wipe the front panel and other exterior surfaces of the unit with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such
chemicals may discolor the surface or damage the unit.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to outside. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
EN - 4
Safety Information (cont’d)
5
Cleaning the Disc Lens
• If this unit still does not perform properly although you refer to the relevant sections and to “Helpful Hints” in this user
manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection
and cleaning of the laser optical pickup unit.
Disc Handling
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
• Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit. Do not
attempt to play such discs, as they may damage the unit.
Testing the Remote Control
• If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in
camera) to see if it is sending out an infrared signal.
How to perform the test?
1. Point the IR transmitter of the remote control towards the lens of the digital camera (or cell phone camera).
2. Turn on the digital camera and look at the IR transmitter of the remote control through the LCD
display of the digital camera.
3. While looking at the LCD, press the buttons on your remote control you want to test.
a. If your remote control is working properly, the IR transmitter of the remote control will create a
noticeable flash on the LCD of the digital camera.
b. If it does not flash, replace the batteries in your remote with new batteries and try again. If it still does not flash,
your remote control may be damaged or defective. Please contact customer service for replacement options.
Notice
Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or
their respective owners. P&F USA reserves the right to change products at any time without being obliged to adjust earlier
supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or
its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity
and suitability must be obtained. P&F USA warrants that the material itself does not infringe any United States patents. No
further warranty is expressed or implied. P&F USA cannot be held responsible neither for any errors in the content of this
document nor for any problems as a result of the content in this document. Errors reported to P&F USA will be adapted
and published on the P&F USA support website as soon as possible.
Warranty
No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be
done by Service Centers and official repair shops. Failure to do so shall void any warranty, stated or implied. Any operation
expressly prohibited in this manual, any adjustments, or assembly procedures not recommended or authorized in this
manual shall void the warranty.
Important
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don’t miss out.
Complete and return your Product Registration Card at once, or register online at www.philips.com/support to ensure:
Product Safety Notification
By registering your product you receive notification - directly from the manufacturer - in the rare case of a product recall
or safety defect.
Additional Benefits of Product Ownership
Registering your product guarantees that you receive all of the privileges to which you’re entitled, including special money-
saving offers.
For further assistance
For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips Customer Care Center
at 1-866-309-0846
Environmental Care
The packaging of this product is intended to be recycled. Contact your local authorities for information
about how to recycle the packaging. For Product recycling information, please visit - www.recycle.philips.com
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many areas batteries may
not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations.
EN - 5
Contents
6
Introduction
Disc Playback Features
Safety Informations ...........................................................3
Introduction........................................................................ 7
Playable Discs and Video Cassettes..............................8
Menus ................................................................................ 33
Fast Forward/Fast Reverse........................................... 34
x1.3 and x0.8 Rapid Play with Voice .......................... 34
Title/Chapter/Time Search........................................... 35
Track Search.................................................................... 36
Paused and Step-by-Step Playback, Resume On...... 37
Repeat, A-B Repeat........................................................ 38
Markers............................................................................. 39
Subtitles, Camera Angles .............................................. 40
Audio Language, Stereo Sound Mode........................ 41
Slow Motion, Zoom....................................................... 42
Program/Random Playback........................................... 43
MP3/Windows Media™ Audio/JPEG Playback ........ 44
On-Screen Displays........................................................ 46
Black Level........................................................................ 48
Initializing .......................................................................... 48
Initial DVD/VCR Setup
Hookups..............................................................................9
Remote Control Setup ..................................................14
First-time DVD/VCR Setup ..........................................15
Basic Playback
Video Cassette Playback................................................16
Disc Playback....................................................................17
Basic DVD/VCR Controls
Display Panel.....................................................................18
Front Panel, Rear Panel and Remote Control..........19
Additional VCR Setup
DVD Player Setup Options
Clock (VCR).....................................................................20
Language (VCR)...............................................................21
VCR Status Displays .......................................................21
Language............................................................................ 49
Display............................................................................... 51
Progressive Scan.............................................................. 52
Audio ................................................................................. 53
Parental Password .......................................................... 54
Parental Levels................................................................. 55
Others............................................................................... 56
VCR Recording Options
Videotape Recording......................................................22
One-Touch Recording ...................................................23
Rerecording (Tape Duplication)..................................24
Timer Recording..............................................................25
Satellite Link......................................................................27
DVD to Videotape Duplication....................................29
Information You May Need
Glossary............................................................................ 58
Helpful Hints.................................................................... 59
Care and Maintenance................................................... 62
Specifications.................................................................... 62
Ninety (90) day Limited Warranty............................. 63
Information Index........................................................... 64
Video Cassette Playing Options
Repeat Playback...............................................................30
Tape Counter...................................................................30
Time Search, Index Search............................................31
Special Effects Playback..................................................32
Automatic Operation Features....................................32
Additional VCR Features
Hi-Fi Stereo ......................................................................33
EN - 6
Introduction
7
Welcome!
This DVD/VCR combines a Digital Video Disc (DVD) player and a Hi-Fi Video Cassette Recorder (VCR) into one unit,
letting you play DVDs, Audio Compact Discs (Audio CDs), and Video Cassettes on one piece of equipment.
Read this owner’s manual carefully to learn how to use the features listed below.
VCR Features
• Automatic Head Cleaner
• English, French and Spanish Menus and Displays
• 19 Micron head
• Searching : Time, Index, Forward and Reverse
• Slow Motion
• Still Picture
• Recording : One-Touch and Timer
• Repeat Playback
• Tape Counter
• Tracking Adjustment
• Satellite Link
Disc Features
• Audio Language choices *
• Camera Angles *
• DVD menus in a desired language * • Parental Control *
• Windows Media™ Audio Playback • Random Playback
• Dual Playback
• Repeat : A-B Repeat
• Resume On
• Markers
• MP3 Playback
• JPEG Playback
• Paused / Fast / Slow / Step-by-Step • Specific Time / Title/ Chapter / Track
Playback
Search
• Program Playback
• Progressive Scan
• Subtitles *
• Zoom
* If available on the disc
Package Contents
The following items are provided with your new DVD/VCR.
• Remote Control and two AA (1.5 V) batteries
• One set of Audio (red and white tips) and Video (yellow tips) cables
• This Owner’s Manual and Quick Start Guide
DVD Disc Menus...
Some explanations in this manual describe DVD Disc Menus. DVD manufacturers set the menus, which vary among DVDs.
Not all DVDs have menus. If the DVD has a menu, access it by pressing DVD, then DISC MENU on the remote control.
Details are on page 33.
DVD Player Setup Menu...
Some instructions explain how to use the DVD player’s Setup Menu to set up features of the DVD player or a DVD.
Access the DVD player menu by pressing SETUP on the remote control when playback is stopped. Even if a feature is set in
the DVD player’s menu, it may not be available if the current DVD does not include that feature.
Available Disc Features...
All features described in this manual are not available on every disc. If the feature is not available on the disc,
you cannot use the DVD / VCR to make it available. An “X” will appear in the top right corner of the TV screen
if you try to access a feature that is not currently available.
EN - 7
Playable Discs and Video Cassettes
Playable Discs
8
The DVD player will play Digital Video Discs (DVDs); finalized Digital Video Discs Recordable (DVD+R, DVD-R); finalized
Digital Video Discs Rewritable (DVD+RW, DVD-RW); Audio Compact Discs (CDs); finalized Compact Discs Recordable
(CD-R) and Compact Discs Rewritable (CD-RW).
To play a DVD, make sure it meets the requirements for Region Codes and Color Systems as described below. Discs that
have the following logos will play on the DVD player. Other disc types are not guaranteed to play in the DVD / VCR.
• Do not stand the unit up vertically. Install the unit in a horizontal and stable position.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
DVD
DVD+R
DVD+RW
DVD-R
DVD-RW
Audio CD
CD-R
CD-RW
MP3 files
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
is a trademark of DVD Format/Logo Licensing Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation
in the United States and/or other countries.
This unit is not compatible with Multiple Bit Rate
(MBR : a file that contains the same content encoded at several different bit rates).
Region Codes
DVDs must be labeled for ALL regions or for Region 1 in order to play on this DVD player. You
cannot play DVDs that are labeled for other regions.
Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you cannot play the DVD
in this player.
The number inside the globe refers to a region of the world. Region 1 represents the United States, Canada, upper regions
of North America, Bermuda, the U.S.Virgin Islands, and small regions near Australia. A disc encoded in a specific region
format can only play on DVD players with the same region code. For example, if a disc is labeled for Region 2, you cannot
play the DVD on this player.
Color Systems
Different color systems are available throughout the world. The most common color systems are NTSC, which is used
primarily in the United States and North America, PAL, and SECAM.
This DVD player will play both NTSC and PAL DVDs. You cannot play DVDs recorded in other formats.
The color system of the DVD may be listed on the DVD or on the disc case. Your TV must have the NTSC and / or PAL
color system as well.
Playable Video Cassettes
The VCR of this DVD / VCR has a High Quality (HQ) system and is compatible with existing Video Home System (VHS)
equipment. Use only video cassettes that have the
mark. The use of other tapes may result in poor picture quality
and excessive deposits on the video heads, which may not be covered by the warranty if damage occurs.
The VCR also has a 19 micron head, which provides a better picture when you view tapes recorded in slow speed (SLP).
Unacceptable Discs
If you insert an unacceptable type of disc, a Disc Error message may appear on the TV screen. The following discs will not
play on this DVD player.
• CD-ROM
• Video Single Disc (VSD)
• Unfinalized disc
• Compact Disc-Interactive (CD-I)
• DVD-ROM
• DVD contains MP3, Windows
Media™ Audio or JPEG files
• DVD-RAM
• DVD-Audio
• Blu-ray Disc™
• Non-compatible recording mode
On the following disc, the sound may not be heard.
• Super Audio CD - Only the sound on the CD layer can be heard. The sound on the high-density Super Audio CD layer
cannot be heard.
EN - 8
Initial DVD/VCR Setup
Hookups
9
Determining the best possible connection...
Your hookup will be determined primarily by your existing equipment, especially your TV. These guidelines describe which
options have the best picture and sound quality. You will not use all the jacks on the DVD / VCR.
★★★★
If your TV has Component Video In jacks (which could be labeled Y CR CB, Y PR PB or YUV and may be
green, blue and red), use the Component Video jacks (Y CB/PB CR/PR) for the best picture quality. If you use
only this video connection, only the DVD picture will be available. To see DVD features on the TV, set the TV
to its Component Video In channel. Component Video provides the best picture quality. See page 11.
Progressive Scan provides less flickering and higher image resolution than traditional (525i / 480i or interlace)
TV signals.
If your TV has Progressive Scan (525p/480p or progressive), connect the TV to the DVD / VCR’s
COMPONENT VIDEO OUT (Y CB/PB CR/PR) jacks. Set Progressive Scan (PROG. SCAN) to ON in the DVD/
VCR’s DISPLAY Menu. See pages 51-52. P.SCAN will appear on the DVD / VCR’s display panel. Set your TV
to Progressive Scan also.
If your TV does not have Progressive Scan but has Component Video In jacks, connect them to the
DVD / VCR’s COMPONENT VIDEO OUT jacks (Y CB/PB CR/PR). Set Progressive Scan (PROG. SCAN) to
OFF either in the DISPLAY Menu or by pressing and holding PLAY B (DVD) on the front of the DVD / VCR
for more than 5 seconds. See pages 51-52.
★★★
★★
If your TV has an S-Video In jack (which also may be labeled Y/C or S-VHS), use the S-VIDEO OUT jack for
excellent picture quality. If you use only this video connection, only the DVD picture will be available. To see
DVD features on the TV, set the TV to its S-Video In channel. See page 11.
If your TV has a single yellow Video In jack (which also may be labeled CVBS, Composite or baseband), use
the yellow DVD/VCR VIDEO OUT jack for good picture quality. This connection provides a picture for both
the DVD player and the VCR. To see DVD or VCR features on the TV, set the TV to its Video In channel. See
page 10.
★★★★
★★★
If you have a Stereo with a Coaxial Digital Audio In jack, this provides the clearest sound for the DVD player.
Connect the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack to your Stereo for the best sound quality. If
you use only this audio connection, only disc sound (no VCR) will be available. See page 13.
If digital audio connections are not possible, connect the DVD/VCR’s red and white DVD/VCR AUDIO OUT
jacks to the Audio In jacks of your Stereo or TV. This connection provides sound for both the DVD player
and the VCR. See pages 11-12.
Before you begin...
● Refer to the manuals of your TV, Cable Box, Stereo or other devices as necessary. Note the style of jacks and
connectors on the other equipment. Determine how to choose different Audio and Video In channels on your other
equipment so you can see and hear the DVD / VCR material playing on the TV, Stereo, etc.
● Disconnect all equipment from the power outlets. Connect the equipment to power only after you have finished hooking
up everything. Never make or change connections with equipment connected to power.
Remember...
● Set the TV to the correct Video In channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or
A/V IN, EXT1 or External In, etc. These channels often are located near channel zero (0). Or, your TV’s remote may
have a button or switch that selects the Video Input channel. See your TV manual for details. If you do not see the DVD
or VCR playback on the TV, go to the lowest TV channel (01 or 02) and change channels downward until you see the
DVD or VCR picture on the TV. To help you find the right Audio / Video In channel, turn on the DVD/VCR. Press DVD
to put the DVD / VCR in DVD mode.With no disc in the player, a large DVD Video logo will appear on the TV screen
when you get the TV on the correct Audio / Video In channel.
● Set the Stereo to the correct channel or “source” mode.
● Depending on your connection, you may need to purchase additional cables or adaptors. If your TV or monitor has
BNC-type connectors, you will need an adaptor.
Once you determine the best option, find your choice on pages 10-13. Follow the steps for the hookup you
choose. Then, go to page 15 to complete the first-time setup.
EN - 9
Hookups (cont’d)
10
DVD / VCR to An External Tuner
This DVD / VCR does not have a tuner input jack. To record TV programs on your DVD / VCR, you need to connect this
DVD / VCR to an external tuner device (e.g., set top box, cable box or satellite receiver) that has audio / video output jacks.
e.g.)
Back of TV
RF coaxial cable
(not supplied)
AUDIO IN
TV Signal
L
5
ANT. IN
R
Audio Cable
(not supplied)
1 2
VIDEO IN
6
RF coaxial cable
(not supplied)
Video Cable
(not supplied)
DVD
DVD/VCR VCR
AUDIO OUT AUDIO IN
VIDEO
OUT
AUDIO OUT
CONT
DIGITAL
AUDIO S-VIDE
OUT
OUT
R
L
AUDIO OUT
L
L
L
P
B
R
R
COAXIAL
VIDEO OUT VIDEO IN
IN
OUT
R
DVD / VCR
Video Cable (supplied)
Audio Cable (supplied)
External tuner
Connections
Connect a TV signal to the IN jack on the external tuner.
Helpful Hint
1
2
3
4
5
6
7
8
• If your TV has antenna in jack only,it is
still possible to connect this unit to
your TV by using a commercially
available stereo audio/video RF
modulator. Refer to the manual
accompanying the modulator for more
information.
• Required cables and connecting
methods differ depending on the
external tuner. For more information,
please contact your external tuner
provider.
• Instead of using video out jack of this
DVD/VCR, you can also use S-video
out jack or component video output
jack for connecting to your TV.
• Refer to the manual accompanying
external devices for more information.
Use an RF coaxial cable (not supplied) to connect the Out jack
on the external tuner to the ANT. IN jack on the TV.
Connect the red and white audio cable (supplied) to the red
and white AUDIO OUT jacks on the external tuner and to the
red and white VCR AUDIO IN jacks on the DVD/VCR.
Connect the yellow video cable (supplied) to the yellow VIDEO
OUT jack on the external tuner and to the VCR VIDEO IN jack
on the DVD/VCR.
Connect another red and white audio cable (not supplied) to
the red and white DVD/VCR AUDIO OUT jacks on the DVD/
VCR and to the red and white Audio In jacks on the TV.
Connect another yellow video cable (not supplied) to the DVD/
VCR VIDEO OUT jack on the DVD/VCR and to the Video In
jack on the TV.
Connect the power cords of the TV and the DVD/VCR to a
power outlet. Turn on the TV and set it to the correct Video In
channel.
You are ready to turn on the DVD/VCR. Go to page 15 to
complete the first-time setup.
● You can record any unscrambled channel by selecting the channel on the
external tuner. Be sure that the external tuner is turned on.
● Signal from the external tuner can be output only on CVBS output even
when the power of the DVD/VCR is off.
● You cannot record one channel while watching another channel.
EN - 10
Hookups (cont’d)
11
DVD/VCR to a TV that has Audio/ Video, Component Video or S-Video In jacks
Back of TV
Audio and Video IN
2b
COMPONENT
Jacks on TV
VIDEO IN
AUDIO IN
L
DVD
Y
COMPONENT
VIDEO OUT
AUDIO S-VIDEO
Audio Cable (supplied)
OUT
OUT
AUDIO IN
VIDEO IN
Y
Cb/Pb
Cr/Pr
L
L
R
1
P
B
R
P
R
R
1
2a
Video Cable
(supplied)
Back of TV
DVD
AUDIO IN
COMPONENT
VIDEO OUT
AUDIO S-VIDEO
OUT OUT
Y
1
L
DVD
DVD/VCR VCR
AUDIO OUT
L
COMPONENT
VIDEO OUT
S-VIDEO IN
DIGITAL
AUDIO OUT
AUDIO SDEO
OUT
UT
C
B
/
/
Y
L
L
P
B
R
L
R
C
P
B
/
R
R
B
C
R
COAXIAL
VIDEO OUT VIDEO IN
PR
R
2c
Connect the red and white audio cable (supplied) to the red
and white DVD or DVD/VCR AUDIO OUT jacks on the DVD/
VCR and to the red and white Audio In jacks on the TV.
● If you are using DVD/VCR AUDIO OUT jacks for your audio
connection, use 2a method for your video connection. If you are using
DVD AUDIO OUT jacks for your audio connection, use 2b or 2c
method for your video connection.
1
Connect the yellow video cable (supplied) to the DVD/VCR
a VIDEO OUT jack on the DVD/VCR and to the Video In jack
2
2
2
3
on the TV. The Video In jack on the TV is usually yellow and may
be labeled CVBS, Composite or Baseband video.
Connect component video cable (not supplied) to the
b COMPONENT VIDEO OUT jacks on the DVD/VCR and to
the Component Video In jacks on the TV. The Component
Video In jacks on the TV are usually red, blue and green.
Connect an S-Video cable (not supplied) to the S-VIDEO
c OUT jack on the DVD/VCR and to the S-Video In jack on
the TV.
Connect the power cords of the TV and the DVD/VCR to a
power outlet. Turn on the TV and set it to the correct Video In
channel.
If you are using the yellow video cable for VCR playback, choose the
Video In channel at your TV. To find the correct Video In channel, go to
your lowest TV channel and change channels downward until you see
VCR playback on the TV screen. To help you find the right Video In
channel,turn on the DVD/VCR. Press DVD to put the DVD/VCR in
DVD mode. With no disc in the player, a large DVD Video logo will
appear on the TV screen when you get the TV on the correct Video In
channel.
Helpful Hint
• Match the cable colors to the jack
colors. If the TV has a single Audio In
jack, use the white audio cable to
connect the DVD/VCR’s white
AUDIO OUT (left) jack to the TV’s
Audio In jack. You will not use the red
cable. Or, purchase a “splitter” audio
cable to go from the left/right AUDIO
OUT jacks of the DVD/VCR to the
TV’s single Audio In jack.
You are ready to turn on the DVD/VCR. Go to page 15 to
complete the first-time setup.
4
EN - 11
Hookups (cont’d)
12
DVD/VCR to a TV and a Stereo
Back of TV
(example only)
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT
OUT
OUT
AUDIO OUT
Y
L
L
L
C
B
/
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
R
C
R
P
R
Stereo
Audio Cable
(supplied)
VIDEO IN
AUDIO (LEFT) IN
AUDIO (RIGHT) IN
Video Cable
(supplied)
2
1
Connect the supplied red and white audio cable to the red and white DVD/VCR AUDIO OUT jacks
on the DVD/VCR and to the red and white Audio In jacks on the Stereo. Match the cable colors to the
jack colors.
1
2
3
Connect the supplied yellow video cable to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to
the Video In jack on the TV.
To use Component Video cable or S-Video cable instead for the DVD player, see page 11. You will still need the
yellow video cable for VCR features.
Connect the power cords of the DVD/VCR, TV and Stereo to a power outlet. Turn on the TV and
set it to the Video In channel. Or, simply go to your TV’s lowest channel (01 or 02) and continue changing
channels downward at the TV until you see VCR or DVD playback on the TV screen.
To help you find the right Video In channel at the TV, turn on the DVD/VCR. Press DVD to put the DVD/VCR in
DVD mode. With no disc in the player, a large DVD Video logo will appear on the TV screen when you get the TV
on the correct Video In channel.
Turn on the Stereo and set it to the correct auxiliary or source mode. Check your Stereo manual for
details.
You are ready to turn on the DVD/VCR. Go to page 15 before turning on the DVD/VCR.
4
EN - 12
Hookups (cont’d)
13
DVD/VCR to a TV and to a Stereo that is Dolby Digital-compatible Using
Digital Audio connections
Back of TV
(example only)
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT AUDIO IN
OUT
OUT
AUDIO OUT
Y
L
L
L
C
B
/
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
R
C
R
P
R
Stereo
2
VIDEO IN
Video Cable
(supplied)
1
COAXIAL
DIGITAL
AUDIO IN
Coaxial Digital Audio
Cable (not supplied)
Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s COAXIAL DIGITAL AUDIO
OUT jack and to the Coaxial Digital Audio In jack on the Stereo. This digital audio connection only
provides sound for the DVD player of the DVD/VCR. So, in order to use the VCR features, connect the supplied
red/white audio cable. To connect the red/white audio cable, see step 5 on page 10.
Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO OUT jack on the DVD/VCR
and to the Video In jack on the TV. To use component video cable or S-Video cable instead for the DVD
player, see page 11. You will still need the yellow video cable for VCR features.
1
2
3
Plug in the power cords of the Stereo, TV and DVD/VCR. Turn on the Stereo and select its Auxiliary
IN channel. Turn on the TV and set it to the correct Video In channel. Go to your TV’s lowest channel
(01 or 02) and change channels downward until you see DVD or VCR material on the TV screen.
To help you find the right Video In channel on the TV, turn on the DVD/VCR. Press DVD to put the DVD/VCR in
DVD mode. With no disc in the player, a large DVD Video logo will appear on the TV screen when you get the TV
on the correct Video In channel.
Make sure Progressive Scan (PROG. SCAN) is OFF and P.SCAN does not appear on the DVD/VCR’s display panel.
Disable Progressive Scan either in the DISPLAY Menu or by pressing and holding PLAY B (DVD) on the front of
the DVD/VCR for more than 5 seconds. Details are on pages 9 and 52.
You are ready to turn on the DVD/VCR. Go to page 15 before turning on the DVD/VCR.
4
Remember...
Some DVDs are recorded in Dolby Digital Multi-channel Surround Sound. Select Dolby Digital Multi-channel Surround
Sound in the DVD Disc Menu. If Dolby Digital Surround Sound is not recorded on the disc, you will not have surround
sound available.
If you connect the DVD/VCR to a Dolby Digital Stereo, set DOLBY DIGITAL to BITSTREAM in the DVD player’s Setup
Menu. Details are on page 53. If the DVD/VCR is not connected to a Dolby Digital-compatible Stereo, set DOLBY
DIGITAL to PCM. Incorrect settings may cause noise distortion and damage the speakers.
EN - 13
Remote Control Setup
14
Putting Batteries in the Remote Control
Remove the battery compartment lid on the bottom of the
remote control by pressing the tab, then lifting the lid.
1
Place two AA (1.5 V) batteries inside the battery compartment
with their + and – ends aligned as indicated.
2
Replace the battery compartment lid.
1
3
Using the Remote Control
● Point the remote control at the DVD/VCR’s remote sensor (see page 19)
when using the remote to operate the DVD/VCR. Do not point the remote
at the TV.
● Do not put objects between the remote and the DVD/VCR.
Recycling Guidelines/Battery Safety
● Your new product and its packaging contain materials that can be recycled
and reused. Specialized companies can recycle your product to increase the
amount that needs to be properly disposed. Your product uses batteries
that should not be thrown away when depleted but should be disposed of as
small chemical waste. Please find out about the local regulations on disposal
of your old product, batteries and packaging whenever you replace existing
equipment.
● Battery Usage CAUTION
Incorrect use of batteries can result in hazards such as leakage and bursting.
Please observe the following:
2
3
• Lithium or ni-cad and ni-mh rechargeable batteries are not
recommended to use for remote control.
• Do not mix different types of batteries such as alkaline and standard
(carbon-zinc).
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together. Although they may look
similar, different batteries may have different voltages.
• Make sure that the + and - ends of each battery match the indications in
the battery compartment.
• Remove batteries from battery compartment, when the remote is not
going to be used for a month or more.
• When disposing of used batteries, please comply with governmental
regulations or environmental public rules that apply in your country or
area.
• Do not recharge, short-circuit, heat, burn or disassemble batteries.
EN - 14
First-time DVD/VCR Setup
15
Before turning on your DVD/VCR,make sure batteries are in the remote control and the DVD/VCR and TV are connected
correctly.
These menus may not appear if you have already turned on the DVD/VCR.
Turn on the TV. Set it to the correct Video In channel.
(Check your TV owner’s manual for details.)
Turn on the TV.
1
2
1
Press y. VCR light will appear on the front of the DVD/VCR. The
display shown below will appear.
These menus may not appear if you have already turned on the DVD/
VCR. You may have turned on the DVD/VCR before to find the Audio/
Video In channel of the TV, for example. If so, follow the steps on
page 21 to select a language for the VCR menus.
2
3
OPEN/CLOSE
1
4
2
5
8
0
3
6
9
TRACKING
LANGUAGE SELECT
7
CLEAR
TITLE
DVD
ENGLISH
FRANÇAIS
ESPAÑOL
[ON]
+10
VCR
SETUP
DISC
INPUT
MENU
PUSH
OK
Press ▲ or ▼ to select ENGLISH, FRANCAIS (French) or
ESPAÑOL (Spanish) as the language for VCR On-Screen Displays
and menus.
3
REW
PLAY
FFW
BACK
AUDIO
Then, press ►.
STOP
PAUSE
● To put the DVD/VCR in VCR mode, press VCR so VCR light appears.
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
Helpful Hint
• To skip this feature and play a tape
immediately, insert a tape with its
record tab removed.
• Repeat this process if the power fails.
EN - 15
Basic Playback
Video Cassette Playback
16
Read and follow the steps below to play a tape.
Turn on the TV. Set it to the correct Video In channel. (Check
your TV owner’s manual for details.)
Details are on page 9.
Turn on the TV.
1
2
1
2
Insert a tape in the cassette compartment of the DVD/VCR.
VCR light will appear on the front of the DVD/VCR. If the tape’s
record tab has been removed, playback will start automatically.
If the DVD/VCR power is already on, press VCR to put the DVD/VCR
in VCR mode if necessary. VCR light will appear on the front of the
DVD/VCR.
Insert a tape in the DVD/
VCR.
● If playback does not start automatically, press VCR, then press
PLAY B.
● Press STOP C to stop playback.
OPEN/CLOSE
1
4
2
5
8
0
3
6
● Press REW E to rewind the tape.
● After the tape stops, press STOP/EJECT
TRACKING
TITLE
C
A on the front of the
7
9
DVD/VCR to remove the tape.
CLEAR
+10
VCR
SETUP
DVD
DISC
INPUT
MENU
OK
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
Helpful Hint
• Other tape playback features are on
pages 30-33.
• If AUTO REPEAT is ON, playback will
begin when you insert a tape, even
when the record tab is intact. Details
are on page 30.
• You must connect the DVD/VCR to a
TV using the audio/video cables in
order to use the VCR features. These
hookups are explained on pages 10 and
12.
EN - 16
Disc Playback
17
Before you begin, turn on the TV, Stereo and other equipment connected to the DVD/VCR. Make sure the TV and the
Stereo (if applicable) are set to the correct channel. Details are on pages 9-13.
Press y to turn on the DVD/VCR.
1
2
3
4
1
OPEN/CLOSE
1
4
2
5
8
0
3
6
9
Press DVD so DVD light appears on the front of the DVD/VCR.
3,5
TRACKING
7
Press OPEN/CLOSE A to open the disc tray.
CLEAR
TITLE
DVD
+10
VCR
SETUP
Place a disc onto the tray. If the DVD is recorded on only one side,
place the disc on the tray with the label facing up and the shiny side
facing down. Some DVDs are recorded on both sides. Make sure the
label of the side you want to play is facing up.
2
5
DISC
INPUT
MENU
OK
Press PLAY B to close the tray. The tray will close and playback
will begin. If playback does not start automatically, press PLAY B again.
If a DVD Menu appears instead, see page 33.
To play MP3, Windows Media™ Audio or JPEG files, see pages 44-45.
You also can close the tray by pressing OPEN/CLOSE A.
● Press STOP C to stop playback.
REW
PLAY
FFW
5
STOP
PAUSE
BACK
Insert a disc.
4
Helpful Hint
• An “X” may appear at the top right
corner of the TV screen when you try
a feature. Either the feature is not
available on the disc, or the DVD/VCR
cannot access the feature at this time.
This does not indicate a problem with
the DVD/VCR.
• If a disc is dirty or scratched, the
picture may appear distorted or
playback may stop. In such cases,
remove the disc and turn off the DVD/
VCR. Disconnect the power cord,
then reconnect it. Clean the disc, then
turn on the DVD/VCR again and
reinsert the disc for playback.
• If a disc has multiple layers, the picture
may freeze occasionally. This happens
when the first layer switches to the
second layer. This is not a malfunction.
• When the DVD or CD light appears
on the display panel, the disc is loaded
and ready for playback.
• When you press OPEN/CLOSE A or
PLAY B (DVD) on the front of the
DVD/VCR when the power is off, the
DVD/VCR will turn on in DVD mode.
Otherwise, the DVD/VCR will turn on
in the mode in which it was turned off.
• If you use PLAY B to close the disc
tray, playback starts automatically. If
you use OPEN/CLOSE A to close the
disc tray, you have to press PLAY B to
start playback.
REMINDER : This DVD/VCR will play
only certain discs.
See page 8 for details.
EN - 17
Basic DVD/VCR Controls
Display Panel
18
VCR light
DVD light
This light appears when the DVD/VCR is in VCR mode. You can only watch
videotapes or access VCR features when VCR light is on. To make VCR light
come on, press VCR on the remote control or SOURCE on the front of the
DVD/VCR.
This light appears when the DVD/VCR is in DVD mode. You
can only watch DVDs when DVD light is on. To make DVD
light come on, press SOURCE on the front of the DVD/VCR
or DVD on the remote control.
Display
Messages about current disc operations appear
here. See Display Messages below.
Cassette Compartment
Insert a video cassette here.
Disc tray
Insert a disc here.
OPEN/CLOSE
DVD VIDEO PLAYER
ONE TOUCH RECORDING LONG PLAY
•
STANDBY-ON
VIDEO
L
AUDIO
R
REW
F.FWD STOP/EJECT PLAY
REC
VCR
DVD
STOP
PLAY
SOURCE
DVD
DVD Display Panel
Appears when a repeat function is active.
Appears when Progressive Scan is active.
Displays the current disc type.
Appears when A-B
Repeat is on.
GROUP
P.SCAN
DVD
Appears when ALL
Repeat is on.
(CD, MP3, Windows
Media™ Audio and
JPEG)
CD
Displays the elapsed time of the title or
track. The number of a new title, chapter,
or track is displayed for 3 seconds when a
chapter or track is switched, or DISPLAY
is pressed during playback.
•
•
DVD : DVD
CD : Audio CD, MP3, Windows
Media™ Audio, JPEG
Appears when disc playback is paused.
Appears during Slow Motion Playback (DVD).
Appears during disc playback.
VCR Display Panel
Indicates a tape is in the DVD/VCR.
Appears when an OTR, Timer Recording, or Satellite Link has
been set.
Appears during recording; flashes
when recording is paused.
REC
Appears during playback when the Auto
Repeat function is on.
PM
Indicates current time is P.M. There is
no A.M. indication.
Appears if tape playback is paused.
Appears during Slow Motion Playback.
Appears during tape playback.
Indicates the elapsed playing time of a tape; also displays a selected external
input channel, tape speed, remaining time for an OTR or the current time.
Display Messages
Tray is closing.
Disc is loading.
Appears after the disc tray closes if the
tray is empty, if there is an error
reading the disc, or if an unacceptable
disc is installed.
Tray is opening or is open.
EN - 18
Front Panel, Rear Panel and Remote Control
19
Front Panel
Remote Sensor
TRACKING K / L Buttons
OPEN/CLOSE A Button (DVD)
y STANDBY-ON Button
OPEN/CLOSE
DVD VIDEO PLAYER
ONE TOUCH RECORDING LONG PLAY
•
STANDBY-ON
VIDEO
L
AUDIO
R
REW
F.FWD STOP/EJECTPLAY
REC
TRACKING
VCR
DVD
STOP
PLAY
SOURCE
DVD
VCR AUDIO and
VIDEO IN jacks (L2)
REW E Button (VCR)
F.FWD g Button (VCR)
STOP/EJECT A Button (VCR)
REC I Button (VCR)
PLAY B Button (DVD)
STOP C Button (DVD)
SOURCE Button
PLAY B Button (VCR)
C
Rear Panel
DVD/VCR AUDIO and VIDEO OUT jacks
Helpful Hint
• The DVD S-VIDEO OUT, DVD
DVD COMPONENT
VIDEO OUT jack
VCR AUDIO and VIDEO IN jacks (L1)
COMPONENT VIDEO OUT, DVD
AUDIO OUT and DVD COAXIAL
DIGITAL AUDIO OUT jacks are only
useful in DVD mode. To have sound
and picture in VCR mode, you must
connect the audio/video cables
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
AUDIO S-VIDEO
AUDIO OUT AUDIO IN
OUT
OUT
Y
L
L
L
C
P
B
/
/
R
R
B
COAXIAL
VIDEO OUT VIDEO IN
R
C
P
R
R
supplied. Details are on pages 10-12.
AC Power Cord
DVD S-VIDEO OUT jack
DVD COAXIAL
DIGITAL AUDIO
OUT jack
DVD AUDIO OUT jacks
Remote Control
y (STANDBY-ON) Button
OPEN/CLOSE
TRACKING
1
4
2
5
8
0
3
6
9
OPEN/CLOSE A Button
TRACKING K / L Button
Number Buttons
7
CLEAR
TITLE
+10
TITLE Button
CLEAR Button
DVD Button
VCR Button
SETUP Button
VCR
SETUP
DVD
DISC
Helpful Hint
• For DVD player features, press DVD
before pressing other buttons.
INPUT
MENU
INPUT Button
DISC MENU Button
OK Button
OK
0
1 K L Buttons
To put the DVD/VCR in DVD mode,
press DVD or SOURCE so DVD light
appears on the front of the DVD/VCR.
• For VCR features, press VCR before
pressing other buttons. To put the
DVD/VCR in VCR mode, press VCR
or SOURCE so VCR light appears on
the front of the DVD/VCR.
(SKIP) Button
FFW D Button
(SKIP) Button
REW
PLAY
FFW
BACK
AUDIO
REW E Button
STOP
PAUSE
BACK U Button
PLAY B Button
STOP C Button
DISPLAY Button
PAUSE F Button
DISPLAY SUBTITLE ZOOM
AUDIO Button
ZOOM Button
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SUBTITLE Button
ANGLE Button
SEARCH Button
SPEED
MODE TIMER SET
A-B REPEAT Button
REPEAT Button
TIMER SET Button
REC I Button
MODE Button
SPEED Button
EN - 19
Additional VCR Setup
Clock (VCR)
20
Follow these steps to set the VCR clock. Make sure :
Press VCR, then press SETUP so MENU appears. If the clock has
never been set, the CLOCK SET Menu may appear when you press
SETUP. If so, follow the instructions from step 3 on this page.
1
OPEN/CLOSE
TRACKING
1
4
2
5
8
0
3
6
9
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT
CLOCK SET
LANGUAGE SELECT
[OFF]
7
CLEAR
TITLE
+10
VCR
SETUP
DVD
1
9
DISC
INPUT
MENU
Press ▲ or ▼ to select CLOCK SET. Then, press ►.
OK
2
3
2-9
While the MONTH space is flashing, press ▲ or ▼ until the
month appears. Then, press ►.
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
CLOCK SET
DISPLAY SUBTITLE ZOOM
MONTH DAY
YEAR
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
HOUR MINUTE
SPEED
MODE TIMER SET
While the DAY space is flashing, press ▲ or ▼ until the day
appears. Then, press ►.
4
5
6
7
8
9
While the YEAR space is flashing, press ▲ or ▼ until the year
appears. Then, press ►. The day of the week will appear
automatically.
While the HOUR space is flashing, press ▲ or ▼ until the hour
appears. Then, press ►.
While the MINUTE space is flashing, press ▲ or ▼ until the
minute appears. Then, press ►.
While the AM or PM space is flashing, press ▲ or ▼ to point to
AM or PM.
Your selection will flash on the screen in the AM/PM space.
Helpful Hint
• If the clock has never been set, the
CLOCK SET Menu may appear when
you press SETUP. If so, follow the
instructions from step 3 above.
• Press DISPLAY repeatedly to show the
time on the TV screen.
Press CLEAR or ► to start the clock.
• Power failures of more than 30
seconds can erase the Clock Setting.
• To reset the clock, follow steps 1-2.
Select the information you want to
change using ◄ or ►. When the
information is flashing, use ▲ or ▼ to
enter the correct information. Press
CLEAR to set the clock.
EN - 20
Language (VCR)
21
Follow the steps below to change the language of the VCR On-Screen Displays and menus.
Press VCR, then press SETUP so MENU appears.
7
8
0
9
CLEAR
TITLE
1
- M E N U -
+10
TIMER PROGRAMMING
SATELLITE LINK
4
VCR
SETUP
DVD
1
AUTO REPEAT
CLOCK SET
[OFF]
DISC
LANGUAGE SELECT
INPUT
MENU
OK
2-3
Press ▲ or ▼ to choose LANGUAGE SELECT, then press ►.
REW
PLAY
FFW
2
3
Press ▲ or ▼ to choose ENGLISH, FRANCAIS (French) or
ESPAÑOL (Spanish).
Helpful Hint
LANGUAGE SELECT
• If you select FRANCAIS (French) or
ESPAÑOL (Spanish) and need English :
ENGLISH
FRANÇAIS
ESPAÑOL
[ON]
1. Press SETUP so MENU appears.
2. Press ▼ to choose SELECTION
LANGUE or SELEC. IDIOMA, then
press ►.
PUSH
3. Press ▲ or ▼ to select ENGLISH.
Press CLEAR to remove the menu.
4. Press CLEAR.
4
VCR Status Displays
You may access Status Displays by pressing DISPLAY. The displays may include the current time, external input channel and
other information.
Press DISPLAY. The Count Display will appear for 5 seconds. After 5
seconds, only the real-time tape counter will appear. This counter
shows you the elapsed playing time of the tape (from the point at which
the counter was set to 0). The counter also will appear on the display
panel on the front of the DVD/VCR.
OK
1
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
STOP
STOP
DISPLAY SUBTITLE ZOOM
1-3
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
Press DISPLAY again. The CLOCK Display will appear for 5
seconds. After 5 seconds, only the time will appear. The time also will
appear on the display panel on the front of the DVD/VCR.
2
3
Helpful Hint
Press DISPLAY again to remove all the displays.
• You cannot access a Status Display
when viewing a still picture, during
slow motion, or during Forward and
Reverse Searching.
EN - 21
VCR Recording Options
Videotape Recording
22
Read and follow the steps below to record a television program onto a
videotape.
Before you begin :
Turn on the TV.
1
2
● This DVD/VCR does not have a tuner input jack. To record TV
programs on your DVD/VCR, you need to connect this DVD/VCR
to an external tuner device (e.g., set top box, cable box or satellite
receiver) that has audio/video output jacks. See page 10 on how to
connect the DVD/VCR to the external tuner.
● Make sure the DVD/VCR is in VCR mode. Press VCR so VCR light appears
on the front of the DVD/VCR.
Insert a tape in the DVD/
VCR.
Turn on your external tuner, and turn on the TV and set it to
the correct Video In channel. (Check your TV owner’s manual for
details.)
OPEN/CLOSE
1
4
2
5
8
0
3
6
1
TRACKING
TITLE
Insert a tape with its record tab intact into the cassette
compartment of the DVD/VCR. If tape playback begins, press STOP
7
9
C.
CLEAR
2
3
4
5
+10
Press SPEED repeatedly until the desired tape speed (SP or
SLP) appears briefly on the screen. Details about tape speed are on
page 58.
VCR
SETUP
DVD
DISC
INPUT
MENU
4
Press INPUT to select the appropriate external input channel
(L1/L2) to which your external tuner is connected. Then select
the desired channel to record on the external tuner.
OK
REW
PLAY
FFW
BACK
AUDIO
Press REC I to start recording. “REC” will appear on the DVD/
VCR’s display panel.
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
● To pause the recording, press PAUSE F once. “REC” will flash. To
resume recording, press REC I or press PAUSE F again. “REC” will
reappear.
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
● To stop recording, press STOP C.
5
3
Recording Prevention
Video cassettes have record tabs to ensure that recordings are
not accidentally erased.
● To prevent recording,break off the tab with a screwdriver.
● To allow recording,cover the hole with clear tape.
Helpful Hint
• Other recording options are on
pages 23-29.
• The VCR will record in a preset
volume.
Remove the tab
to prevent
recording.
Cover the hole
to allow
recording.
• Pause will switch to stop after 5
minutes to protect the VCR and the
tape from damage. When a recording
is paused, review the pause time
remaining with the C marks on the
screen. Each C mark equals 1 minute
remaining. During the last minute of
paused recording, the C mark will
flash.
• If any menu is on the TV screen, REC
on the remote does not function. Press
CLEAR to remove the menu. Then,
I
press REC
I. Or, use REC
I
on the
front of the DVD/VCR.
EN - 22
One-Touch Recording
23
One-Touch Recording (OTR) lets you set a timed recording 30 minutes to 8
hours long.
Before you begin :
OPEN/CLOSE
● This DVD/VCR does not have a tuner input jack. To record TV
programs on your DVD/VCR, you need to connect this DVD/VCR
to an external tuner device (e.g., set top box, cable box or satellite
receiver) that has audio/video output jacks. See page 10 on how to
connect the DVD/VCR to the external tuner.
● Place the DVD/VCR in VCR mode. Press VCR so VCR light appears on the
front of the DVD/VCR.
1
4
2
5
8
0
3
6
9
TRACKING
7
CLEAR
TITLE
DVD
+10
VCR
SETUP
● Select a recording speed (SP,SLP) by pressing SPEED.
● Put a videotape in the cassette compartment. Make sure the tape’s record
tab is intact and the tape is long enough to record the program(s).
DISC
INPUT
MENU
1
OK
Press INPUT to select the appropriate external input channel
(L1/L2) to which your external tuner is connected. Then select
the desired channel to record on the external tuner.
1
2
REW
PLAY
FFW
BACK
AUDIO
Press REC I repeatedly until the desired recording length (30
minutes to 8 hours) appears on the TV screen. Recording will
begin. “REC” and “ ” will appear on the DVD/VCR’s display panel.
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
OTR
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
When an OTR ends
The DVD/VCR will turn off and “ ” on the DVD/VCR’s display panel will
flash indicating that the recording is complete, then goes into the timer
standby mode again. (It may switch to DVD mode automatically.) At this point,
you cannot use the VCR unless you release the DVD/VCR from the timer
standby mode.
To release the DVD/VCR from timer standby mode
● If the DVD component is active and no more Timer Recordings are on
standby, you can cancel the timer standby mode by pressing TIMER SET or
Helpful Hint
• The remaining recording time will
appear on the display panel during an
OTR. Press DISPLAY to see it on the
TV screen.
• To change the recording length while
an OTR is in progress, press REC
repeatedly.
• You cannot pause an OTR.
• If the preset time for a Timer
Recording comes up during an OTR,
the OTR has priority. The Timer
Recording will not take place.
• If the end of the tape is reached during
an OTR, the VCR will stop recording,
eject the tape, and switch to DVD
mode or turn off.
VCR on the remote control or by pressing SOURCE or STOP/EJECT
on the front panel.
C
A
● If the DVD component is not active, or the “ ” is not flashing but lit
indicating there are more Timer Recordings on standby, you can cancel the
timer standby mode only by pressing TIMER SET on the remote control or
I
by pressing STOP/EJECT
C
A on the front panel.
● After releasing the DVD/VCR from timer standby mode, you can use it as
usual.
Stopping an OTR
● To stop an OTR before recording is finished, press STOP C on the remote
control or STOP/EJECT
C
A on the front of the DVD/VCR.
● To cancel the OTR but continue recording, press REC I repeatedly until
REC appears in the upper left corner of the TV screen, and “ ” disappears.
• If one or more Timer Recordings are
on standby when one OTR ends, the
DVD/VCR will turn off automatically
and “ ” will appear on the DVD/
VCR’s display panel indicating that it is
now ready for another Timer
Recording.
EN - 23
Rerecording (Tape Duplication)
24
These instructions are made on the premise that the DVD/VCR 1 is already connected to the TV. The instructions show
you how to copy videotapes. The illustration uses two DVD/VCRs.Other VCRs or Camcorders may operate differently.
1. Audio cable from AUDIO OUT jacks (red and white) of DVD/VCR 1 to
AUDIO IN jacks of DVD/VCR 2
DVD
DVD/VCR VCR
COMNENT
DIGITAL
AUDIO S-VIDE
AUDIO OUT AUDIO IN
OUT
OUT
AUDIO OUT
L
L
L
/
R
R
P
COAXIAL
VIDEO OUT VIDEO IN
R
C
R
PR
2. Video cable from yellow VIDEO OUT jack of
DVD/VCR 1 to VIDEO IN jack of DVD/VCR 2
DVD/VCR 1
Playing unit
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
UT AUDIO IN
OUT OUT
AUDIO OUT
Y
L
L
C
B
/
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
R
C
R
PR
DVD/VCR 2
Recording unit
Make the connections shown above.
1
2
3
4
5
6
7
DVD/VCR 1 will play your tape. Put a prerecorded tape into the
cassette compartment of DVD/VCR 1. Press VCR to put the unit
in VCR mode if necessary.
DVD/VCR 2 will record your tape. Insert a blank tape in the
cassette compartment of DVD/VCR 2. Press VCR to put the unit
in VCR mode if necessary.
Turn on the TV and set it to the correct Video In channel.
(Check your TV owner’s manual for details.)
Helpful Hint
• If you use the AUDIO and VIDEO IN
jacks on the back of DVD/VCR 2,
select L1 at step 5.
• If you use the AUDIO and VIDEO IN
jacks on the front of DVD/VCR 2,
select L2 at step 5.
• Unauthorized recording of copyrighted
television programs, video tapes or
other materials may infringe on the
rights of copyright owners and violate
copyright laws.
Point the remote control at DVD/VCR 2. Press INPUT to
select the appropriate external input channel. (See Helpful Hint
to the right.)
Press SPEED to select SP or SLP at DVD/VCR 2. Details about
tape speed are on page 58.
Press PLAY B (VCR) on the front of DVD/VCR 1 and REC
I
on the front of DVD/VCR 2 at the same time.
● To stop recording, press STOP/EJECT
press STOP/EJECT A on DVD/VCR 1.
C
A on DVD/VCR 2, then
C
• If a program has copyright protection,
it may not be recorded clearly.
EN - 24
Timer Recording
25
Follow the steps below to program the VCR of the DVD/VCR to record TV
programs while you’re away from home.
Before you begin :
OPEN/CLOSE
● This DVD/VCR does not have a tuner input jack. To record TV
programs on your DVD/VCR, you need to connect this DVD/VCR
to an external tuner device (e.g., set top box, cable box or satellite
receiver) that has audio/video output jacks. See page 10 on how to
connect the DVD/VCR to the external tuner.
1
4
2
5
8
0
3
6
TRACKING
TITLE
7
9
CLEAR
● Set the clock. Details are on page 20.
+10
● Put a tape in the cassette compartment of the DVD/VCR. Make sure the
tape’s record tab is intact and the tape is long enough to record the
program(s).
● Press VCR so VCR light appears on the front of the DVD/VCR.
● Turn on your external tuner.
VCR
SETUP
DVD
DISC
1
INPUT
MENU
OK
Press SETUP so MENU appears.
2-6
REW
PLAY
FFW
BACK
AUDIO
1
2
STOP
PAUSE
Press ▲ or ▼ to select TIMER PROGRAMMING.
Then, press ►. Program numbers that do not have a Timer Recording
stored will flash.
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
TIMER PROGRAMMING
SPEED
MODE TIMER SET
PROG.
DATE
START TIME
END TIME
REC SPEED
Press ▲ or ▼ to select an empty program.
Then, press ►.
3
Helpful Hint
• You cannot access the TIMER
PROGRAM NUMBER
DATE
START TIME
END TIME
PROGRAMMING Menu at step 2 if the
clock is not set. The CLOCK SET
Menu will appear. Follow the steps on
page 20 to set the clock.
REC SPEED
• Only programs that will air Monday-
Friday can be recorded on a DAILY
basis. If you select DAILY at step 4,
then enter a Saturday or Sunday DATE
at step 5, the correct program will not
be recorded. The VCR will alter the
recording date and record a different
program than the one you intended.
• If you connected the external tuner to
the AUDIO IN and VIDEO IN jacks on
the front of the DVD/VCR, choose L2.
If you connected the external tuner to
the AUDIO IN and VIDEO IN jacks on
the back of the DVD/VCR, choose L1.
• Enter the information while the space
is flashing.
Press ▲ or ▼ to select ONCE, DAILY or WEEKLY.
Then, press ►.
● ONCE - The VCR will record a TV program on any day you choose,
up to 12 months away.
● DAILY - The VCR will record a TV program at the same time on the
same channel every day, Monday through Friday.
● WEEKLY - The VCR will record a TV program at the same time on
the same channel every week, for example,every Monday.
To set the recording date and time, press ▲ or ▼ until the
4
desired setting appears, then press ►.
5
6
Press ▲ or ▼ to select the appropriate external input channel
(L1/L2) to which your external tuner is connected. Then select
the desired channel to record on the external tuner.
● Leave the external tuner on for the Timer Recording. Details are on
page 10.
• You cannot program more than one
year in advance.
Instructions continue on the next page.
EN - 25
Timer Recording (cont’d)
26
Press ▲ or ▼ to select a recording tape speed. The arrow will
appear beside your choice. The selected speed will flash beside REC
SPEED. Details about tape speed are on page 58.
You must select the recording speed to complete the timer
programming.
7
OPEN/CLOSE
TRACKING
1
4
2
5
8
0
3
6
9
ONE TIME PROGRAM
7
PROGRAM NUMBER
1
CLEAR
TITLE
DATE
WED
+10
START TIME
END TIME
8
7
VCR
SETUP
DVD
DISC
REC SPEED
INPUT
MENU
OK
Press CLEAR to remove the menu.
8
9
REW
PLAY
FFW
BACK
AUDIO
Press TIMER SET.
● In some cases, the DVD/VCR will switch to DVD mode instead. You
may use the DVD player during a Timer Recording.
● If you want to use the VCR until time for the recording, don’t press
TIMER SET until a few minutes before the recording should start. Or,
press TIMER SET only when you know you won’t be using the VCR
anymore (until after the recording).
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
9
● When “ ” is lit (not flashing), you cannot put the DVD/VCR in VCR mode
by pressing VCR or SOURCE. You must first press TIMER SET on the
remote control or STOP/EJECT
C
A
on the front panel to cancel the
Timer Recording temporarily. Then, you can use the VCR features again.
When a Timer Recording ends
● The DVD/VCR will turn off and “ ” on the DVD/VCR’s display panel will
flash indicating that the recording is complete, then goes into the timer
standby mode again. (It may switch to DVD mode automatically.) At this
point, you cannot use the VCR unless you release the DVD/VCR from the
timer standby mode.
To release the DVD/VCR from timer standby mode
● If the DVD component is active and no more Timer Recordings are on
standby, you can cancel the timer standby mode by pressing TIMER SET or
VCR on the remote control or by pressing SOURCE or STOP/EJECT
on the front panel.
Helpful Hint
C
A
• To stop a started Timer Recording,
press STOP/EJECT A on the front of
C
● If the DVD component is not active, or the “ ” is not flashing but lit
the DVD/VCR. (You cannot stop a
started Timer Recording with STOP
on the remote.)
indicating there are more Timer Recordings on standby, you can cancel the
timer standby mode only by pressing TIMER SET on the remote control or
C
by pressing STOP/EJECT
C
A on the front panel.
● After releasing the DVD/VCR from timer standby mode, you can use it as usual.
Canceling a Timer Recording Before the Recording Starts
Press VCR, then press SETUP so MENU appears.
• To change incorrect information, press
◄ or ► to choose the item you want
to change. Press ▲ or ▼ to adjust the
information.
• If there is no tape in the VCR when
you press TIMER SET, “ ” will flash.
Insert a tape.
• If one or more Timer Recordings are
on standby when one Timer Recording
ends, the DVD/VCR will turn off
automatically and “ ” will appear on
the DVD/VCR’s display panel indicating
that it is now ready for another Timer
Recording.
1
Press ▲ or ▼ to select TIMER PROGRAMMING, then press ►.
2
Press ▲ or ▼ to find the program you want to cancel.
3
4
5
While the program number is flashing, press ◄ to clear all the
information for that program.
Press CLEAR to remove the menu.
EN - 26
Satellite Link
27
You can set the DVD/VCR to start recording whenever it detects a video
signal from the external tuner.
Before you begin :
OPEN/CLOSE
● Set the clock. Details are on page 20.
1
4
2
5
8
0
3
6
● Put a tape in the cassette compartment of the DVD/VCR. Make sure the
tape’s record tab is intact and the tape is long enough to record the
program(s).
● Press VCR so VCR light appears on the front of the DVD/VCR.
● Turn on the external tuner.
TRACKING
TITLE
7
9
CLEAR
+10
● Use the VCR AUDIO and VIDEO IN jacks on the rear (L1) to connect the
DVD/VCR to the external tuner. VCR AUDIO and VIDEO jacks on the
front (L2) cannot read any signal from the external tuner.
● If the external tuner is equipped with some kind of timer function, set it to
output audio/video signals when it comes to the time you want to start
recording and stop when it comes to the time you want to stop recording.
Refer to the tuner’s manual on how to set the timer.
● If the external tuner is not equipped with timer function, leave it on for
Satellite Link Recording.
VCR
SETUP
DVD
2
3-6
DISC
INPUT
MENU
OK
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
L1
To audio/video
input jacks
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
External tuner
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
AUDIO S-VIDEO
AUDIO OUT AUDIO IN
OUT
OUT
Y
L
SPEED
MODE TIMER SET
L
C
B
/
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
R
C
R
P
R
Audio/VideoCables
(supplied)
DVD/VCR
1
Press SPEED repeatedly until the desired tape speed (SP or
SLP) appears briefly on the screen. Details about tape speed are on
page 58.
1
2
3
In stop mode, press SETUP.
Press ▲ or ▼to select SATELLITE LINK, then press B.
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT
CLOCK SET
LANGUAGE SELECT
[OFF]
Instructions continue on the next page.
EN - 27
Satellite Link (cont’d)
28
Press ▲ or ▼ to set the desired start hour, then press ►.
4
SATELLITE LINK
Helpful Hint
● The hour can be selected from 1-12 with AM or PM.
● When the external tuner signal is stopped, recording will be stopped
also.
Press ▲ or ▼ to set the desired start minutes.
If you wish to go back to the left, press ◄.
• If you have not set the clock, CLOCK
SET menu will appear at step 3. Refer
to “Clock (VCR)” on page 20.
• You cannot set the ending time for the
Satellite Link Timer Recording on this
DVD/VCR.
5
6
SATELLITE LINK
• Recording picture will be distorted if
the copy protection signal is being
detected during Satellite Link Timer
Recording.
• When a regular Timer Recording and
the Satellite Link Timer Recording are
overlapped, those recordings are
recorded as illustrated below.
Press ► to set Satellite Link standby mode.
SATELLITE LINK
e.g.)In case of the Satellite Link Timer Recording is
overlapped on the existing Timer Recording.
[ON]
Timer
Recording
Satellite Link
● “ ” on the DVD/VCR’s display panel lights up and the DVD/VCR
goes to the DVD mode. If you do not use DVD function, turn off the
DVD/VCR.
● If the external tuner is not equipped with timer function, leave it on
for Satellite Link Recording.
recording
result
● To cancel the Satellite Link function in standby mode :
Press TIMER SET on the remote control or STOP/EJECT
DVD/VCR.
e.g.)In case of the Timer Recording is programmed
in the middle of the Satellite Link Timer Recording.
C
A on this
Timer
Recording
● To cancel the Satellite Link function while the Satellite Link Recording
is in progress :
Press STOP/EJECT
Satellite Link
C
A on the DVD/VCR.
recording
result
e.g.)In case of the Timer Recording is overlapped
on the existing Satellite Link Timer Recording.
Timer
Recording
Satellite Link
recording
result
EN - 28
DVD to Videotape Duplication
29
Follow the steps below to copy a DVD to a videotape. This will be possible
only if the DVD is not copy protected.
Before you begin :
OPEN/CLOSE
● Put a videotape in the cassette compartment. Make sure the tape’s record
tab is intact and the tape is long enough to record the DVD.
● Put the DVD you want to copy in the disc tray.
● Press VCR so VCR light appears on the front of the DVD/VCR.
● Turn on the TV and set it to the correct Video In channel.
(Check your TV owner’s manual for details.)
1
4
2
5
8
0
3
6
9
TRACKING
7
CLEAR
TITLE
DVD
+10
VCR
SETUP
Press INPUT repeatedly until “DISC” appears on the TV screen.
4
DISC
INPUT
MENU
1
1
DISC
OK
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
Press SPEED repeatedly until the desired tape speed (SP or
SLP) appears briefly on the screen. Details about tape speed are on
page 58.
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
2
SPEED
MODE TIMER SET
Press REC I to start recording. “REC” will appear on the display
panel.
3
2
3
Press DVD. Press PLAY B to play the disc.
● To pause the recording, press VCR, then press PAUSE F once. “REC”
will flash.
● To resume recording, press REC I or press PAUSE F again. “REC”
will reappear.
● To stop recording, press VCR, then press STOP C.
4
Helpful Hint
• A Timer Recording or Satellite Link is
not available during DVD to videotape
duplication.
• You cannot copy a DVD to a
videotape if you are using Progressive
Scan.
EN - 29
Video Cassette Playing Options
Repeat Playback
30
CLEAR
TITLE
DVD
Follow the steps below to play a videotape repeatedly.
+10
0
Press VCR, then press SETUP so MENU appears.
VCR
SETUP
1
1
2
3
1
2-3
DISC
INPUT
MENU
Press ▲ or ▼ to select AUTO REPEAT.
OK
Press ► so ON appears next to AUTO REPEAT. Tape playback
will begin immediately. AUTO REPEAT will appear on the TV screen
briefly. (If you are fast forwarding or rewinding the tape, press CLEAR to
remove the menu, then press PLAY B to begin tape playback.) The tape
will play to the end, rewind, then play again.
REW
PLAY
FFW
STOP
PAUSE
BACK
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT
CLOCK SET
LANGUAGE SELECT
[ON]
Helpful Hint
• To cancel Auto Repeat, follow steps 1-
2. At step 3, press ► so OFF appears
beside AUTO REPEAT. Press CLEAR.
Tape Counter
Follow the steps below to reset the VCR’s real-time tape counter to 0 at a
tape location you want to refer to later.
TRACKING
7
8
0
9
CLEAR
TITLE
+10
Press VCR, then play, fast forward or rewind a tape to the
location that you would like to refer to later. Press STOP C to
stop the tape.
3
4
VCR
SETUP
DVD
1
1
DISC
INPUT
MENU
Press DISPLAY to see the Status Display.
OK
2
STOP
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
1
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
While the counter is on the screen, press CLEAR to reset the
counter to 0.
SPEED
MODE TIMER SET
3
STOP
Helpful Hint
• You may only set the counter to 0 at
one location at a time. Setting the
counter to zero at a second location
will erase the previous 0 setting.
• If you remove the tape, the counter
will reset to 0 at the point at which
you last stopped playback whenever
you reinsert the tape.
When you later want to return to this point on the tape, press
DISPLAY so you can see the counter (while tape playback is
stopped). Press REW E or FFW D.
As the tape rewinds or forwards,watch the counter. When it reaches 0,
4
press PLAY B to play the tape.
EN - 30
Time Search, Index Search
31
TRACKING
Time Search
Follow the steps below to search forward or backward on a tape a specific
length of time. There must be a tape in the cassette compartment.
7
8
9
CLEAR
TITLE
+10
0
VCR
SETUP
DVD
Press VCR, then press SEARCH repeatedly until the TIME
SEARCH Screen appears.
DISC
1
INPUT
MENU
1
OK
TIME SEARCH
2-3
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
Within 30 seconds, press ▲ or ▼ until your desired length of
time appears. Or, press and hold ▲ or ▼ until you reach the desired
length of time. You can set a Time Search for up to 9 hours and 59
minutes (9:59).
Within 30 seconds, press ◄ (for a reverse search) or ► (for a
forward search). The VCR begins rewinding or fast forwarding the tape.
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
2
1
SPEED
MODE TIMER SET
3
When the tape finishes rewinding or fast forwarding the time you
TRACKING
9
specified, playback will begin. The time will count down beneath TIME
SEARCH during the search. If the end of the tape is reached during the
search, the search will stop and the tape may rewind. Details are on
page 32.
7
8
0
CLEAR
TITLE
+10
VCR
SETUP
DVD
Index Search
An Index Mark is made automatically at the beginning of each recording.
Essentially, an Index Mark is a “bookmark.” Find the start of a recording by
following these steps.
DISC
1
INPUT
MENU
OK
2-3
Press VCR, then press SEARCH repeatedly until the INDEX
SEARCH Screen appears.
REW
PLAY
FFW
BACK
AUDIO
1
STOP
PAUSE
INDEX SEARCH
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
1
SPEED
MODE TIMER SET
Within 30 seconds, press ▲ or ▼ until the number of programs you
want to skip appears beneath INDEX SEARCH. Include the current
program in your number.
2
3
Within 30 seconds, press ◄ (for a reverse search) or ► (for a
forward search). When the tape finishes rewinding or
forwarding,playback will start. The program numbers will count down
beneath INDEX SEARCH during the search. If the end of the tape is
reached during the search, the search will stop and the tape may rewind.
Details are on page 32. Recordings should be at least 1 minute long in SP
speed and 3 minutes in SLP. Otherwise, the Index Mark will not be
available. Details on tape recording speeds are on page 58.
Helpful Hint
• Time Search and Index Search are not
available during recording.
• To remove a Search Display, press
CLEAR.
• To cancel a search, press STOP C.
EN - 31
Special Effects Playback
32
● Before you begin, press VCR so VCR light appears on the front of the DVD/
VCR
SETUP
DVD
VCR.
DISC
INPUT
MENU
Forward and Reverse Searching (SP/LP/SLP) / Super High Speed
Searching (LP/SLP)
OK
During tape playback, press and release FFW D or REW E.
A fast forward or reverse picture search will begin.
Press FFW D or REW E, then press again. The search speed
will increase. Repeatedly pressing FFW D or REW E will switch
between Regular and High Speed Searching.
To return to normal playback, press PLAY B.
1
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
2
Helpful Hint
Viewing a Still Picture
• Slow and still modes will switch to stop
mode after 5 minutes to protect the
DVD/VCR and the tape from damage.
• SP/LP/SLP means this feature will work
with tapes recorded in Standard
During tape playback, press PAUSE F. A still picture will appear
on the screen.
● To advance the still picture one frame at a time, press PAUSE
repeatedly.
1
F
● To release the still picture and return to playback, press PLAY B.
Playback, Long Playback or Super Long
Playback. LP/SLP means this feature
will work with tapes recorded in Long
Playback or Super Long Playback. Tape
speed details are on page 58.
Viewing a Slow Motion Picture
During tape playback, press PAUSE F, then press FFW D.
The tape will play in slow motion.
● To change the playback speed, press FFW D or REW E.
● To return to normal playback, press PLAY B.
1
Automatic Operation Features
The following tape features are available in VCR mode. Press VCR so VCR light appears on the front of the DVD/VCR, if
necessary.
Automatic Playback
When you put a tape in the DVD/VCR, the power will come on.If the tape’s record tab is missing,playback will begin. If a
Timer Recording is set and “ ” is flashing in the display panel, the power will not come on automatically when you insert
a tape with the record tab intact. If a Timer Recording is set and “ ” is flashing in the display panel, the DVD/VCR will
eject the tape if the record tab is missing.
Automatic Rewind, Eject
When a tape is played, fast forwarded or recorded to its end, the tape will rewind to the beginning, stop and eject itself.
This feature does not operate if AUTO REPEAT is ON. Details are on page 30.
Tape Eject
A tape can be ejected with the DVD/VCR power on or off (but the DVD/VCR must be plugged in). If a Timer Recording is
set and “ ” is shown on the display panel, press TIMER SET on the remote control or STOP/EJECT
C
A on the front
panel to cancel the timer standby mode,and then press STOP/EJECT
and press TIMER SET to reset the Timer Recording.
C
A to remove the tape. Remember to insert a tape
Automatic Tracking Adjustment
The VCR adjusts tracking automatically to give you the best possible picture quality. With some recordings, however, you
may get a better picture using manual tracking.
Manual Tracking
To manually adjust the tracking during normal playback and Slow Motion Playback of a videotape, press TRACKING
K
K
/
/
L.
L
Tracking will return to Automatic Tracking when you press STOP
to remove vertical jitter in a Still picture.
C
or insert a tape. You can also press TRACKING
EN - 32
Additional VCR Features
Hi-Fi Stereo
33
Hi-Fi Stereo
Helpful Hint
To play in Hi-Fi stereo the tapes recorded in Hi-Fi stereo, press AUDIO to
• The audio level of a tape recorded in
Hi-Fi stereo will differ from the audio
level of a tape not recorded in Hi-Fi
stereo.
switch HI-FI or MONO.
Disc Playback Features
Menus
DVD Disc Menus
Some DVDs contain menus that describe the contents of the disc or allow you to customize disc playback. For example,
the menu may offer choices for subtitle languages, director’s commentary or Sound Track Playback. To use the DVD Menu
and select playback features, follow these steps.
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
CLEAR
TITLE
+10
0
1
2
3
VCR
SETUP
DVD
1
2
DISC
Press DISC MENU. The DVD’s main Disc Menu will appear.
INPUT
MENU
OK
Press ▲, ▼, ◄ or ► to select an item, then press OK. Continue
this process to set up all the features you want.
3
3
REW
PLAY
FFW
Using the Title Menu
Some DVDs have a Title Menu, which lists the titles available on the DVD. Use
the Title Menu to play a specific title.
TRACKING
TITLE
7
8
0
9
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
CLEAR
+10
VCR
2
1
1
2
3
SETUP
DVD
DISC
Press TITLE. The Title Menu will appear.
If a Title Menu is not available, the “X” may appear on the TV screen.
Or, if the DVD only has a main Disc Menu as described above, it may
appear when you press TITLE.
Press ▲, ▼, ◄ or ► to select a title, then press OK. Playback will
begin at the title you selected.
INPUT
MENU
OK
REW
PLAY
FFW
Helpful Hint
• Menus vary among discs. Follow the
literature accompanying the disc for
details.
• Not all DVDs have Disc or Title
Menus.
• Some DVDs may refer to chapters as
“scenes.” Some DVDs may refer to the
Title Menu as the “scene index.”
• TITLE will not be active with all DVDs.
EN - 33
Fast Forward/Fast Reverse
34
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
4
7
5
8
0
6
TRACKING
TITLE
1
2
9
CLEAR
During playback, press FFW D or REW E on the remote
control.
+10
VCR
SETUP
DVD
● During DVD playback, pressing FFW D or REW E will forward or
reverse the picture at approximately 2, 8, 20, 50 or 100 times the
normal speed. The speed may vary depending on the disc. g 1,
g 2, g 3, g 4 or g 5 will appear briefly on the TV screen to
indicate Forward Searching. Or, h 1, h 2, h 3, h 4 or
h 5 will indicate fast reverse. For DVD playback, the sound will be
mute during the search.
● For Audio CDs, MP3 or Windows Media™ Audio playback, pressing
FFW D or REW E will forward or reverse the picture or sound at
approximately 2, 8 or 30 times the normal speed. The speed may vary
depending on the disc. g 1, g 2 or g 3 will appear briefly on
the TV screen to indicate Forward Searching. Or, h 1, h 2 or
h 3 will indicate fast reverse. For Audio CD, MP3 or Windows
Media™ Audio playback, the sound will be intermittent during the
search.
1
2
DISC
INPUT
MENU
OK
REW
PLAY
FFW
BACK
AUDIO
2
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
3
ANGLE
SEARCH REPEAT REPEAT
A-B
Helpful Hint
Example : Playing a DVD in
reverse at twice the normal
playing speed.
• If you use FFW D or REW
E
during Dual Playback, JPEG playback
will be paused.
Press PLAY B to return to normal playback.
3
x1.3 and x0.8 Rapid Play with Voice
Rapid Play with Voice is available only during playback on the discs recorded in
the Dolby Digital format. Rapid Play with Voice plays back in slightly faster/
slower speed while keeping the sound quality as in the normal playback.
Helpful Hint
• During Rapid Play with Voice;
During playback, press MODE.
The current setting appears.
- Audio Language Setting and Black
Level Setting cannot be changed.
- the PCM sound will be output if using
the digital audio connection
(COAXIAL).
- depending on the scenes you are
playing, Rapid Play with Voice may be
unavailable.
1
2
Press OK to switch among
(x1.3),
(x0.8) and OFF.
: Plays back approximately at 1.3 times of normal playback.
: Plays back approximately at 0.8 times of normal playback.
OFF : No effects.
● To resume normal playback, press PLAY B.
EN - 34
Title/Chapter/Time Search
35
Title/Chapter Search
OPEN/CLOSE
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
1
4
2
5
8
0
3
6
1
2
3
3
TRACKING
TITLE
During DVD playback, press SEARCH repeatedly until CH (for
chapter) or TT (for title) appears on the TV screen. The number of
available titles or chapters will appear at the right ( /4, for example).
7
9
CLEAR
+10
Enter the title or chapter number using the Number buttons.
The title or chapter will play.
● To select a single-digit track number when there are more than 10
tracks, press OK to play the track.
● If you enter a track number that is not available on the Disc, playback
will not begin (or the current track will continue to play).
VCR
SETUP
DVD
1
DISC
INPUT
MENU
OK
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
2
3
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
OPEN/CLOSE
3
Title/Chapter Search
1
4
2
5
8
0
Press DVD to put the DVD/VCR in DVD mode.
6
DVD light will appear on the front of the DVD/VCR.
TRACKING
1
2
7
9
CLEAR
TITLE
DVD
During DVD or Audio CD playback, press SEARCH repeatedly
until the Time Search Display appears.
+10
VCR
SETUP
1
DISC
INPUT
MENU
OK
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
Within 30 seconds, use the Number buttons to enter the
DISPLAY SUBTITLE ZOOM
elapsed playing time (of the track or title) at which you want
playback to begin. Enter the time in hours, minutes and seconds.
Within a few seconds, playback will start at the specified time.
● Example : 1 hour, 23 minutes and 30 seconds
1 → 2 → 3 → 3 → 0
3
2
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
● Make sure the time you enter is within the total time of the current
title or track. If it is not, the time space will clear and playback will
continue at its current point. The total time available in the current
track or title will appear in the Time Search Display.
● If you make a mistake entering the time, press CLEAR to clear the
time area. Enter the correct information.
Helpful Hint
• When playback is stopped, use
the Number buttons to select a title
for immediate playback. During
playback, use the Number buttons to
choose a chapter for immediate
playback.
• Title/Chapter Search is not available
with some DVDs.
• Time Search is not available for MP3,
Windows Media™ Audio and JPEG
files.
EN - 35
Track Search
36
There are three ways to play a specific Audio CD, MP3, Windows Media™
Audio or JPEG track : Use the Number buttons, the SEARCH button or
and
.
OPEN/CLOSE
TRACKING
● Before you begin, press DVD so DVD light appears on the front of the
DVD/VCR.
1
4
2
5
8
0
3
6
9
A,B
C
B
7
A
CLEAR
TITLE
+10
Using the Number buttons
VCR
SETUP
DVD
Press the Number buttons to enter a track number.
DISC
Playback will start at the selected track. For tracks 10 and above, press the
+10 button so the Search Display (TR _ _ /12 - an example of total tracks)
appears on the TV screen. Press the Number button of the first digit, then
press the Number button of the second digit. For example,to play track 26,
press +10, then Number 2, then Number 6 (Each number must be pressed
within 30 seconds of the previous number). For single-digit tracks (1-9), press
a single Number button. If you enter a track number that is not available on
the disc, play will not begin (or the current track will continue to play).
INPUT
MENU
OK
C
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
B
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
Using SEARCH
SPEED
MODE TIMER SET
Press SEARCH so the Track Search Display (TR) appears. Within 30
seconds, press the Number buttons to select the track number.
Playback will begin at the selected track. For a single-digit track (1-9), enter 0
first. For example, to play track 5, press 0,5. You do not have to use the +10
button in search mode.
C
Using
During playback, press
or
to skip the current track and move to the
next track. The track number will appear briefly on the DVD/VCR display
panel. Or, during playback, press to return to the beginning of the
current track. Press repeatedly to go to previous tracks. The track
number will appear briefly on the DVD/VCR display panel.
Helpful Hint
•
and
playback is stopped.
• You cannot use to go from the last
track on the disc to the first track.
• Using or during Dual Playback
does not function when
will only affect MP3 files. If you want to
skip JPEG files during Dual Playback,
press ◄ or ►. Please note that
pressing
or
will affect both MP3
and JPEG files if SLIDE SHOW is set to
MUSIC.
EN - 36
Paused and Step-by-Step Playback, Resume On
37
Paused and Step-by-Step Playback
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
4
7
5
8
0
6
TRACKING
TITLE
1
2
9
CLEAR
During disc playback, press PAUSE F. Playback will pause and the
sound will be mute.
+10
VCR
SETUP
DVD
● Pressing PAUSE F once during Dual Playback will pause a JPEG file
only. Pressing PAUSE F one more time will pause an MP3 playback.
When playing a DVD, press PAUSE F repeatedly to see the
picture advance one frame (or step) at a time. The sound will
remain mute. Pressing PAUSE F repeatedly during Audio CD, MP3,
Windows Media™ Audio or JPEG playback will have no effect.
Press PLAY B to resume playback.
1
DISC
INPUT
MENU
OK
3
4
4
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
2-3
Resume On
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
SPEED
MODE TIMER SET
1
2
Press STOP C during playback. In a few seconds, the
following Resume message will appear on the TV screen.
For DVD or AudioCD :
For MP3, Windows
Media™ Audio or JPEG:
Helpful Hint
• Set STILL MODE to FIELD in the
DISPLAY Menu if paused images are
blurry. Details are on pages 51-52.
Resume ON
Resume ON
Press ‘PLAY’ to play from here.
To play the beginning,
Press ‘PLAY’ to play from the
beginning of current track.
To play the beginning,
press ‘STOP’ first and then ‘PLAY’.
press ‘STOP’ first and then ‘PLAY’.
Press PLAY B. In a few seconds, playback will resume from the point
at which it stopped last. You can Resume Playing at the same point even
if you turn off the DVD/VCR, then turn it on again later. However,
opening the disc tray will cancel the Resume feature. Playback will start
at the beginning the next time you insert the disc. For MP3, Windows
Media™ Audio and JPEG playback will resume from the beginning of the
current track. To cancel Resume and start playing the disc from the
beginning, press STOP C again while playback is in the resume stop
mode. As for MP3, Windows Media™ Audio and JPEG playback, File List
will appear when you cancel Resume. Press PLAY B to start playing the
disc from the beginning.
4
7
5
8
0
6
TRACKING
TITLE
3
9
CLEAR
+10
VCR
SETUP
DVD
1
3
DISC
INPUT
MENU
OK
REW
PLAY
FFW
BACK
AUDIO
● The resume information will be cleared if you change the parental
level when the resume information is on.
STOP
PAUSE
2
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
EN - 37
Repeat, A-B Repeat
Repeat
38
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
VCR
SETUP
DVD
1
2
DISC
1
2
INPUT
MENU
During DVD, Audio CD, MP3, Windows Media™ Audio or
JPEG playback, press REPEAT repeatedly until the repeat
mode you want appears on the TV screen. On a DVD, select
CHAPTER, TITLE or OFF. On an Audio CD, select TRACK, ALL (all
tracks on the disc) or OFF. With MP3, Windows Media™ Audio or
JPEG tracks,select TRACK, GROUP (all tracks in the current folder),
ALL or OFF. Selecting a new track,chapter or title will cancel Repeat
Playback.
OK
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
CHAPTER
TRACK
SPEED
MODE TIMER SET
Example : Repeat a DVD
chapter
Example : Repeat an Audio CD
track
A-B Repeat
You can play a specified section of a DVD or Audio CD repeatedly. Follow
these steps to set up the section you want to repeat.
VCR
SETUP
DVD
DISC
1
2
INPUT
MENU
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OK
1
Press PLAY B to play the disc to the point at which you want
repeated playback to begin.
REW
PLAY
FFW
BACK
AUDIO
2
STOP
PAUSE
Press A-B REPEAT to set the starting point (A). If you make a
mistake, press CLEAR. This will erase point A and let you start over.
DISPLAY SUBTITLE ZOOM
3
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
OFF will appear briefly on the TV screen.
SPEED
MODE TIMER SET
Helpful Hint
• Repeat Playback and A-B Repeat are
not available with some discs.
• The entire A-B Repeat section must be
within a single title or track.If you do
not enter Point B before the end of the
track or title is reached, the end of the
track or title will become Point B
automatically.
Play the disc to the point at which you want repeated playback
to end, then press A-B REPEAT again. Within a few seconds, the
A-B section will begin to play repeatedly. The segment will play over and
over until you cancel the A-B Repeat feature.
4
• Point B must be later on the disc than
Point A.
• A-B Repeat is not available with MP3,
Windows Media™ Audio and JPEG
files.
• If you choose GROUP Repeat during
Dual Playback, all tracks or files in each
folder will play repeatedly. For
example if you choose GROUP Repeat
during Dual Playback of MP3 folder A
and JPEG folder B, all MP3 files in
folder A and all JPEG files in folder B
will be repeated.
● To cancel A-B Repeat, press A-B REPEAT.
TV screen. Regular playback will resume.
OFF will appear on the
EN - 38
Markers
39
Use Markers to remember your favorite places on a DVD or Audio CD.
● Before you begin, place the DVD/VCR in DVD mode. Press DVD so DVD
light appears on the front of the DVD/VCR.
OPEN/CLOSE
1
4
2
5
8
0
3
6
Play the disc to within 30 seconds of the point at which you
want to set the Marker. Press SEARCH repeatedly until
Marker Display appears.
1
TRACKING
TITLE
7
9
CLEAR
+10
VCR
SETUP
DVD
DISC
INPUT
MENU
2,4
OK
Example : DVD
3-4
1,4
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
Within 30 seconds, press ◄ or ► to select a Marker (1-10).
Make sure _ _ :_ _ :_ _ appears beneath the number.
2
3
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
When the playback reaches the point you want to remember,
press OK. The title or track number and its elapsed playing time will
appear beneath the Markers. A checkmark will replace the Marker
number. The Marker Display will disappear in about 30 seconds, or
SPEED
MODE TIMER SET
press BACK U to remove it.
Example : DVD
Example : Audio CD
To return to a Marker during playback, press SEARCH
repeatedly until Marker Display appears. Press ◄ or ► to
choose the Marker you want, then press OK. Disc playback will
continue from the marked point.
4
Helpful Hint
• Opening the disc tray or turning off the
DVD/VCR will erase all the Markers.
• To erase a single Marker, press
SEARCH repeatedly until Marker
Display appears. Press ◄ or ► to
select a Marker. Press CLEAR. Press
BACK U to remove the display.
• To erase all the Markers, press
SEARCH repeatedly until Marker
Display appears. Press ► to select AC,
then press OK. Press BACK U to
remove the display.
EN - 39
Subtitles, Camera Angles
40
Subtitles
VCR
SETUP
DVD
The DVD/VCR allows you to select a language for subtitles during playback.
You may select only languages that are available on the DVD.
DISC
1
1
INPUT
MENU
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OK
1
REW
PLAY
FFW
BACK
AUDIO
During playback, press SUBTITLE repeatedly to select a
subtitle language. The number of available languages appears at the
right of the Subtitle Display. In the example below, six languages are
available ( /6). After a few seconds, the subtitles will appear. Or, press
SUBTITLE repeatedly to turn off subtitles. When no subtitles are
available, “NOT AVAILABLE” appears at the right of the Subtitle
Display.
STOP
PAUSE
2
DISPLAY SUBTITLE ZOOM
2
2
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
ENG
Example: English as first of six
available subtitles
Camera Angles
Some DVDs contain scenes recorded from different angles or perspectives.
The perspective will not change if the DVD does not contain sequences
recorded from different camera angles.
VCR
SETUP
DVD
DISC
INPUT
MENU
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OK
1
2
REW
PLAY
FFW
BACK
AUDIO
During playback, press ANGLE repeatedly to select a different
perspective. The number of available angles appears at the right of the
Angle Display. In this example, eight angles are available ( /8).
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
Example : Angle 1 of eight
available angles
Helpful Hint
• With some DVDs, you must select a
subtitle language in the Disc Menu.
• If the desired language does not appear
after pressing SUBTITLE several times,
the disc does not have subtitles in that
language.
• Opening the disc tray will cancel your
Subtitle Setting.
• If the ANGLE ICON Setting is ON,
will appear on the TV screen when the
current portion of the disc has multiple
camera angles. To set the ANGLE
ICON ON or OFF, see pages 56-57.
EN - 40
Audio Language, Stereo Sound Mode
41
Audio Language
You can select a language for DVDs during playback if multiple
languages are available.
VCR
SETUP
DVD
DISC
1
INPUT
MENU
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OK
1
REW
PLAY
FFW
BACK
AUDIO
During DVD playback, press AUDIO repeatedly to choose one
of the available languages. Audio Display appears at the top of the
TV screen, and the new audio will be heard. The display will disappear
after about 5 seconds. The Audio Display may show the current settings
for the Dolby Digital or Multi-channel sound,if they are available on the
disc,and the sampling rate of the disc. The number of available languages
appears after the “ / ” at the right of the display ( /3, for example).
STOP
PAUSE
2
DISPLAY SUBTITLE ZOOM
2
1
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
Example : English audio
Stereo Sound Mode
VCR
SETUP
DVD
Adjust Stereo Sound to determine whether you will hear the left channel, the
right channel or both channels (stereo) during Audio CD playback. If you
connected the DVD/VCR to a Stereo using the COAXIAL DIGITAL AUDIO
OUT jack as described on page 13, you cannot adjust stereo sound mode.
DISC
INPUT
MENU
OK
Press AUDIO repeatedly during Audio CD playback to choose
STEREO, L-ch or R-ch.
REW
PLAY
FFW
BACK
AUDIO
1
STOP
PAUSE
Both right and left channels are
STEREO
heard (stereo).
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
Only the left channel is heard.
L-ch
Helpful Hint
• If a language is not available after
Only the right channel is heard.
R-ch
pressing AUDIO several times, the
DVD does not have that language.
• Some DVDs only let you change the
language in the Disc Menu.
• Audio languages may be abbreviated
(such as ENG for English). Or, three
dashes (- - -) may appear instead of an
abbreviation.
• Audio language selection cannot be
made during Rapid Play with Voice.
(Refer to page 34.)
EN - 41
Slow Motion, Zoom
42
Slow Motion
VCR
SETUP
DVD
DISC
Press PAUSE F during DVD playback.
INPUT
MENU
1
2
OK
Press FFW D or REW E. Slow Motion Playback will begin. Press
FFW D or REW E repeatedly during Slow Motion Playback to play a
DVD forward or backward at approximately 1/16, 1/8 or 1/2 the normal
3
2
REW
PLAY
FFW
BACK
AUDIO
speed. An
the TV screen to indicate Slow Forward Playback. An
(1/8) or 3 (1/2) will indicate Slow Reverse Playback.
1 (1/16),
2 (1/8) or
3 (1/2) will appear briefly on
STOP
PAUSE
2
1
1 (1/16),
2
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
Example : Playing a DVD forward
at half the normal speed.
Press PLAY B to return to normal playback.
3
Zoom
Zooming lets you enlarge the playback image of DVDs or JPEG files, and lets
you pan through the enlarged image.
VCR
SETUP
DVD
DISC
INPUT
MENU
Press ZOOM during playback or when playback is paused. The
picture will appear twice as large. Press ZOOM again to make the
picture four times larger than normal. Either x2 or x4 will appear beside
icon in the upper left corner of the TV screen.
2
OK
1
2
REW
PLAY
FFW
BACK
AUDIO
While the picture is enlarged, press ▲, ▼, ◄ or ► to move the
zoomed image up, down, left or right. The gray box with an inner
blue box that shows during Zoomed Playback is the position guide. To
remove it or show it, press OK. The position of the blue box inside the
gray box indicates the position of the zoomed image within the overall
picture.
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
1
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
Helpful Hint
• The sound will be mute during
Paused or Slow Motion Playback.
• You cannot zoom a Disc Menu.
• The x4 zooming is not active with
some discs. Only x2 zooming is
available for JPEG files.
● To return the picture to normal, press ZOOM repeatedly.
• Position guide is not available for
JPEG playback.
EN - 42
Program/Random Playback
43
Program Playback
You may determine the order in which Audio CD, MP3, Windows Media™
Audio or JPEG tracks will play.
Random Playback
You may play the tracks of an Audio CD in Random order instead of the order
in which they are recorded (1,2,3...). You can also use this feature for MP3,
Windows Media™ Audio and JPEG tracks. Turn on your external tuner.
VCR
SETUP
DVD
DISC
INPUT
MENU
OK
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
1
2
REW
PLAY
FFW
BACK
AUDIO
While playback is stopped, press MODE repeatedly until the
PROGRAM/RANDOM Screen appears.
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
PROGRAM
RANDOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
CD-DA
TOTAL
Disc name
SPEED
MODE TIMER SET
RANDOM PROGRAM
-- no indication --
PLAY
PLAY
CLEAR
Example: Audio CD
Example: MP3
(DUAL PLAYBACK - OFF)
Program Playback
Press ▲ or ▼ to select a track you want to play, then press OK.
Helpful Hint
• You cannot use the Number buttons
or SEARCH to select another track
during Program/Random Playback. Use
3
PROGRAM
CD-DA
TOTAL
or
to select other tracks.
• You cannot combine Random Playback
with a program.
PLAY
CLEAR
• You may play a program or a track
within a program repeatedly. During
Program Playback, press REPEAT so
ALL (all tracks in the program) or
TRACK appears. The entire program
or the current track will play over and
over.
• You cannot alter a program during
playback.
• You can start Program Playback only
while in the PROGRAM Screen.
• A program can have a maximum of 99
tracks.
Example: Audio CD
Press CLEAR to erase the last track in the program if you make an
error. Additional tracks may be on other screens. Press ▼ to go on to
the next page, and press ▲ to go back to the previous page. Repeat this
step until you have selected all the tracks you wish to play in the
program. To see tracks in a program when there are more than 8
tracks, use
,
to see all the tracks. For MP3, Windows Media™
Audio or JPEG folders, press ◄ or ► to go to the previous or next
level of folders. Press TITLE to return to the first item in the highest
level.
Press PLAY B. The tracks will play once in the order you set. Turning
off the player or opening the disc tray will erase the program.
4
• To erase all tracks in the program,
select ALL CLEAR at step 3.
• Program/Random Playback of MP3,
Windows Media™ Audio or JPEG
tracks is not available while DUAL
PLAYBACK is ON.
Random Playback
While the RANDOM Screen appears, press PLAY B. The tracks
will play in random order. After all the tracks play once, playback will
stop.
3
EN - 43
MP3/Windows Media™ Audio/JPEG Playback
44
CLEAR
TITLE
The DVD/VCR will play MP3, Windows Media™ Audio and JPEG files that you
record and finalize on a CD-R (Compact Disc-Recordable) or CD-RW
(Compact Disc-Rewritable).
+10
0
VCR
SETUP
DVD
1
These discs may contain pictures in a JPEG format or audio tracks in an MP3
or Windows Media™ Audio format.For example, you may have photographic
film developed by a retailer that places the pictures on a CD-R for you. These
pictures may be in JPEG format. Or, you may copy or download MP3/
Windows Media™ Audio music files from certain legal Internet sites, then
copy those files onto a CD-R or CD-RW. You cannot make or record such
discs using this DVD/VCR. See your computer manual for details on recording.
Keep these characteristics in mind when making discs you intend to play on
the DVD player of this DVD/VCR.
DISC
INPUT
MENU
OK
2-3
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
● Record MP3 files at a sampling frequency of 44.1 kHz or 48 kHz. Record in a
constant bit rate between 32 kbps and 320 kbps.
● Record Windows Media™ Audio tracks at a sampling frequency of 44.1kHz
or 48kHz. Record in a constant bit rate between 48 kbps and 192kbps.
● When recording JPEG files, the size of the picture should be between 32 x
32 and 6300 x 5100 dots.
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
Helpful Hint
• MP3/Windows Media™ Audio tracks
and JPEG images are known as
1
When you put a CD-R or CD-RW with MP3, Windows Media™ Audio
or JPEG files in the DVD/VCR, a File List will appear automatically. Or if
the disc is already in the DVD/VCR and you want to call up the File List,
press DISC MENU. (If you use PLAY B to close the disc tray, Playback
starts automatically.) Press ▲ or ▼ to select a folder, MP3,
Windows Media™ Audio or JPEG file.
If you choose a track or file, press PLAY B or OK. Starting with
the track or file you selected, the tracks/files will play in the order they
files.Groups of files are called folders.
2
• Folders have the
icon, MP3 files
icon, Windows Media™
Audio files have the icon, and JPEG
files have the icon.
have the
• A maximum of 255 folders can be
recognized. A maximum of 999 files
can be recognized.
• If you use PLAY B to close the disc
tray, playback starts automatically. If
you use OPEN/CLOSE A to close the
disc tray, you have to press PLAY B to
start playback.
3
were recorded, i.e.1,2,3.
If you select a folder and press OK, the tracks or files within
that folder will appear. Press ▲ or ▼ to select the track or file
you want to play, then press PLAY B or OK.
● Press TITLE to return to the first item in the highest level of folders
or files. You also can press ◄or ► to return to previous or next
levels.
● To change the Transition Mode for JPEG playback, press MODE
repeatedly until Transition Mode appears on top of the TV screen
during playback. Then press ◄, ► or OK to switch CUT IN/OUT
and FADE IN/OUT. If you choose CUT IN/OUT, the images will cut
in and out sharply as playback progresses. If you choose FADE IN/
OUT, the images will fade in and out as playback progresses.
● To change the size of the playback image, press MODE repeatedly
until SIZE MODE appears at the top of the TV screen during playback.
Then press ◄, ► or OK to switch NORMAL (100%) and SMALL
(95%).
• During playback, use
the Number buttons or
and
to
change tracks. If a track is not available,
“X” will appear on the TV screen, and
playback may resume at an incorrect
track or may continue with its current
track.
• To see the File List during playback,
press DISC MENU. The current track
will be highlighted.
• Progressive JPEGs (JPEG files saved in
the progressive format) will not play
on this DVD/VCR.
• Copyright protected Windows
Media™ Audio files will not play on
this DVD/VCR.
● Press MODE or BACK U to remove the display.
● During JPEG playback, press ANGLE to rotate a picture 90 degrees
clockwise.
● To stop playback, press STOP C.
• High resolution JPEG files takes longer
to be displayed.
• SIZE MODE may have no effect on some
files (e.g. files with a small picture size).
EN - 44
MP3/Windows Media™ Audio/JPEG Playback (cont’d)
45
Dual Playback
This feature lets you play MP3 and JPEG files simultaneously. Available only
when DUAL PLAYBACK is ON. See pages 56-57 on how to set the DUAL
PLAYBACK ON or OFF.
VCR
SETUP
DVD
DISC
1
2
INPUT
MENU
OK
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
1
REW
PLAY
FFW
BACK
AUDIO
Press DISC MENU during MP3/JPEG playback. A File List will
appear.
STOP
PAUSE
2
DISPLAY SUBTITLE ZOOM
3
Press ▲ or ▼ to select a desired MP3/JPEG file from the list
and press PLAY B or OK.
● To stop playback, press STOP C.
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
3
SPEED
MODE TIMER SET
Folder Playback
You may select to play a folder containing MP3 and JPEG files. Available only
when DUAL PLAYBACK is ON. See pages 56-57 on how to set the DUAL
PLAYBACK ON or OFF.
Press DVD to put the DVD/VCR in DVD mode.
VCR
SETUP
DVD
DVD light will appear on the front of the DVD/VCR.
DISC
1
1
INPUT
MENU
While playback is stopped, press MODE.
A Folder List will appear.
OK
2
REW
PLAY
FFW
BACK
AUDIO
Press ▲ or ▼ to select a folder, then pre PLAY B or OK.
● MP3 and JPEG files in the selected folder will play simultaneously.
STOP
PAUSE
3
DISPLAY SUBTITLE ZOOM
FOLDER LIST
3
2
DISC NAME
FOLDER
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
ALL
SPEED
MODE TIMER SET
PLAY
● If Windows Media™ Audio files are in the folder, those files will be
skipped during Folder Playback.
Helpful Hint
• If you press PLAY B directly after you
inserted a disc which contains both
MP3 and JPEG files and if the DUAL
PLAYBACK Setting is ON, Dual
Playback will start automatically.
• You can not play Windows Media™
Audio and JPEG files together at the
same time. If you choose a Windows
Media™ Audio file during Dual
Playback, only Windows Media™
Audio file will play.
• Dual Playback may not function
properly if MP3 and JPEG files on the
disc interfere each other due to the
difference in their data size.
EN - 45
On-Screen Displays
46
DVD Displays
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OPEN/CLOSE
TRACKING
1
2
1
4
2
5
8
0
3
6
9
Press DISPLAY repeatedly to see the following displays during
DVD playback.
7
CLEAR
TITLE
+10
CH (chapter): Current
chapter number/total
chapters
Elapsed playing time of
the current chapter;
remaining playing time
of the current chapter
VCR
SETUP
DVD
DISC
1
3
INPUT
MENU
OK
REW
PLAY
FFW
BACK
AUDIO
TT (title): Current title
number/total titles
Elapsed playing time of
the current title;
STOP
PAUSE
remaining playing time
of the current title
DISPLAY SUBTITLE ZOOM
2-3
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
SPEED
MODE TIMER SET
Layer number, appears
only when playing a
two-layered disc.
L0: Layer 0 is playing
L1: Layer 1 is playing
BIT RATE: The amount
of audio and video data
currently being read.
CurrentRepeat Setting,
if active
C: Chapter Repeat
T: Title Repeat
A
B: A-B Repeat
Press DISPLAY repeatedly or press BACK U to remove the
display.
3
Audio CD Displays
OPEN/CLOSE
3
1
4
2
5
8
0
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
6
1
2
TRACKING
7
9
Press DISPLAY repeatedly to see the following displays during
Audio CD playback.
CLEAR
TITLE
DVD
+10
VCR
SETUP
DISC
1
3
INPUT
MENU
TR (track) : Current
track number/total
tracks
Elapsed playing time of
the current track;
remaining playing time
of the current track
OK
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
ALL:
DISPLAY SUBTITLE ZOOM
Current Repeat Setting,
if active
T: Track Repeat
Current track number/
total tracks
2-3
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
Elapsed playing time of
the entire disc;
remaining playing time
of the entire disc
A: All Tracks Repeat
B: A-B Repeat
SPEED
MODE TIMER SET
A
Press DISPLAY repeatedly or press BACK U to remove the
display.
3
EN - 46
On-Screen Displays (cont’d)
47
MP3/Windows Media™ Audio/JPEG Displays
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OPEN/CLOSE
1
4
2
5
8
0
3
6
9
1
2
Press DISPLAY repeatedly until the current track or file information
appears.
TRACKING
7
CLEAR
TITLE
DVD
During JPEG playback
During Windows Media™ Audio playback
+10
track name
JPEG file name
VCR
SETUP
1
3
DISC
INPUT
MENU
or
OK
During MP3 playback
title name
MP3 file name
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
● If Dual Playback is on, MP3 file
name will be displayed after
JPEG file name.
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
2-3
artist name
SPEED
MODE TIMER SET
T
Current Repeat Setting
TR (track):
Current track number/
total tracks
Elapsed playing time of
the current track (for
MP3/Windows Media™
Audio only)
Example: MP3 playback
The following may appear to indicate Repeat Playback.
Helpful Hint
• For MP3 files recorded with Variable
Bit Rate (VBR), the elapsed time
displayed on the screen may vary from
the actual elapsed time.
T: The current track will play repeatedly.
G: Tracks in the current folder (group) will play repeatedly.
A: All tracks will play repeatedly.
PROGRAM
only during PROGRAM Playback
or
RANDOM
only during RANDOM Playback
or
FOLDER PLAYBACK
only during FOLDER Playback
● Program and Random Playback is available only when DUAL
PLAYBACK is OFF.
● Folder Playback is available only when DUAL PLAYBACK is ON.
Press DISPLAY or BACK U to remove the display.
3
EN - 47
Black Level
48
Black Level
Helpful Hint
• Black Level is not available for a PAL
DVD.
• The Black Level Settings will be saved
even if the player is turned off.
• The Black Level Settings cannot be
used during x1.3 and x0.8 Rapid Play
with Voice (refer to page 34).
Adjust Black Level to brighten the DVD picture.
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
1
During DVD playback, press MODE so the Black Level icon shows
in the top left corner of the TV screen.
2
ON
While the Black Level icon is shown, press ◄, ► or OK
repeatedly to choose ON or OFF. ON brightens the dark parts of
3
the picture. OFF shows the original picture as recorded. The icon will
disappear after about 10 seconds.
Initializing
Use INITIALIZE to return all your DVD player’s Setup Menu items (except
PARENTAL) to their default settings.
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OPEN/CLOSE
1
1
4
2
5
8
0
3
6
While playback is stopped, press SETUP.
The QUICK SETUP Screen appears.
TRACKING
TITLE
7
9
2
CLEAR
+10
2,4
3
VCR
SETUP
DVD
QUICK SETUP
1
DISC
OSD LANGUAGE ENGLISH
TV ASPECT
4:3 LETTER BOX
OFF
BITSTREAM
INPUT
MENU
PROG. SCAN
DOLBY DIGITAL
OK
Press ◄ or ► to select INIT. (INITIALIZE) at the top of the
menu, then press OK.
REW
PLAY
FFW
BACK
AUDIO
3
4
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
INITIALIZE
Initialize?
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
NO
SPEED
MODE TIMER SET
YES
● Press ▲ or ▼ to select YES. Then press OK twice. To cancel the
process, select NO instead.
Press SETUP to remove the menu.
EN - 48
DVD Player Setup Options
Language
49
You can select different languages for the Audio or Subtitles of DVDs, as well
as languages for DVD Disc Menus and the Setup Menus of the DVD player.
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OPEN/CLOSE
1
1
4
2
5
8
0
3
6
While playback is stopped, press SETUP.
The QUICK SETUP Screen appears.
TRACKING
TITLE
7
9
2
3
CLEAR
+10
Press ◄ or ► to select CUSTOM at the top of the menu, then
press OK.
VCR
SETUP
DVD
2
3-5
1
DISC
INPUT
MENU
OK
LANGUAGE
AUDIO
SUBTITLE
ORIGINAL
OFF
DISC MENU
OSD LANGUAGE
ENGLISH
ENGLISH
REW
PLAY
FFW
STOP
PAUSE
BACK
With
(LANGUAGE) selected, press OK.
4
5
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
OSD LANGUAGE
ORIGINAL
OFF
ENGLISH
ENGLISH
Helpful Hint
• If the DVD’s default settings for Audio
and Subtitle are the same language, the
subtitles may not show unless you turn
them on.
Press ▲ or ▼ to select AUDIO, SUBTITLE, DISC MENU or
OSD LANGUAGE. Press OK.
The language options for the selected item will appear.
• Use the AUDIO and SUBTITLE
buttons to select Audio and Subtitles
available on the DVD. Details are on
pages 40-41.
• If you set AUDIO to ORIGINAL, the
default setting of the DVD Audio will
play.
AUDIO: The DVD’s audio plays in the
LANGUAGE
AUDIO
selected language.
ORIGINAL
The default setting is ORIGINAL.
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
• If you set OSD LANGUAGE to
FRANÇAIS (French) or ESPAÑOL
(Spanish) and need English : Follow
steps 1-2. At step 3, the IDIOMA or
LANGUE Menu will appear. Press OK.
Press ▼ to select LANGUE OSD or
IDIOMA PANT., then press OK. Press
▲ to select ENGLISH, then press OK.
The menus will change to English.
Press SETUP to remove the menus.
• You can change the OSD LANGUAGE
in the QUICK SETUP Menu that
appears when you first press SETUP.
With QUICK SETUP selected, press
OK. OSD LANGUAGE will be
selected. Press OK. Press ▲ or ▼ to
choose a language, then press OK.
Press SETUP to remove the menu.
• The Language Settings may not take
effect until you restart disc playback
from the beginning.
LANGUAGE
SUBTITLE: Subtitles appear in the selected
SUBTITLE
OFF
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
language.
The default setting is OFF.
LANGUAGE
DISC MENU
DISC MENU: A DVD’s Disc Menu appears
in the selected language.
The default setting is ENGLISH.
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
LANGUAGE
OSD LANGUAGE
OSD LANGUAGE: The DVD player’s Setup
Menu can be in English, French or Spanish
only.
The default setting is ENGLISH.
EN - 49
Language (cont’d)
50
Press ▲ or ▼ to select a language, then press OK.
The language lists may continue on multiple screens. Press ▲ or ▼ to
move to the other screens.
● If you select OTHER for AUDIO, SUBTITLE, or DISC
MENU, press four Number buttons to enter the code for the
language you desire. Use one of the Language Codes listed below. The
language or language code you select will appear in the Language
Menu beside AUDIO, SUBTITLE, or DISC MENU.
6
OPEN/CLOSE
TRACKING
1
4
2
5
8
0
3
6
9
6
7
CLEAR
TITLE
+10
VCR
SETUP
DVD
7
6
DISC
LANGUAGE
INPUT
MENU
LANGUAGE CODE
Please enter a 4-digit language code.
OK
REW
PLAY
FFW
BACK
AUDIO
● You can select other languages for AUDIO, SUBTITLE and DISC
MENU only if the language is available on the disc. If the language you
select is not recorded on the DVD, changing these settings will have
no effect.
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
Press SETUP to remove the menu.
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
7
SPEED
MODE TIMER SET
Language Codes
English
Esperanto
Estonian
5160 Kannada
5161 Kashmiri
5166 Kazakh
5760 Panjabi
5765 Pashto
5757 Persian
6469 Polish
5771 Portuguese
6460 Pushto
6247 Tajik
6653
A-B
Abkhazian
Afar
6265 Tamil
5247 Tatar
6258 Telugu
6266 Thai
6265 Tibetan
6367 Tigrinya
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4860
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
F-H
Kinyarwanda
Afrikaans
Albanian
Amharic
Arabic
Faroese
Fiji
Finnish
French
Frisian
5261 Kirghiz
5256 Kirundi
5255 Korean
5264 Kurdish
5271
5350 Laothian
5358 Latin
5747 Latvian
5051 Lettish
5158 Lingala
5758 Lithuanian
5360 Macedonian
5367 Malagasy
5447 Malay
5569 Malayalam
5455 Maltese
5467 Maori
5761 Quechua
5767 Rhaeto-Romance 6459 Tonga
Armenian
Assamese
Aymara
Azerbaijani
Bangla
L-N
Romanian
5861 Russian
5847
5868 Samoan
5868 Sangho
5860 Sanskrit
5866 Serbian
6461 Tsonga
6467 Turkish
Turkmen
6559 Twi
6553
Gaelic (Scots)
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
I-K
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
S
U-Z
Bashkir
Basque
Bengali
Bhutani
Bihari
6547 Ukrainian
6564 Urdu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
5957 Serbo-Croatian 6554 Uzbek
5953 Sesotho
5965 Setswana
5958 Shona
5966 Sindhi
5955 Singhalese
5964 Siswat
5961 Slovak
5960 Slovenian
6047 Somali
6051 Spanish
6061 Sundanese
Swahili
6566 Vietnamese
6660 Volapuk
6560 Welsh
6550 Wolof
6555 Xhosa
6565 Yiddish
6557 Yoruba
6558 Zulu
6561
5165
6567
6569
6568
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Marathi
5565 Moldavian
5560 Mongolian
5547 Nauru
5551 Nepali
5557 Norwegian
5347
5566 Occitan
5647 Oriya
C-E
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
5759
4947
7254
4961
5464
4965
5047
6058
O-R
6149 Swedish
6164
T
Danish
Dutch
5669 Oromo (Afan) 6159 Tagalog
6658
EN - 50
Display
51
You may adjust the TV Aspect ratio and still mode clarity, and Progressive
Scan compatibility.
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OPEN/CLOSE
1
4
2
5
8
0
3
6
1
TRACKING
TITLE
When playback is stopped, press SETUP.
The QUICK SETUP Screen will appear.
7
9
CLEAR
2
+10
2
VCR
SETUP
DVD
1
DISC
QUICK SETUP
INPUT
MENU
OSD LANGUAGE ENGLISH
TV ASPECT
4:3 LETTER BOX
OFF
PROG. SCAN
DOLBY DIGITAL
BITSTREAM
OK
3-5
REW
PLAY
FFW
BACK
AUDIO
Press ◄ or ► to select CUSTOM at the top of the menu, then
press OK.
STOP
PAUSE
3
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
LANGUAGE
AUDIO
SUBTITLE
ORIGINAL
OFF
SPEED
MODE TIMER SET
DISC MENU
OSD LANGUAGE
ENGLISH
ENGLISH
Press ◄ or ► to select
(DISPLAY), then press OK.
4
5
DISPLAY
TV ASPECT
STILL MODE
PROG. SCAN
4:3 LETTER BOX
AUTO
OFF
Press ▲or ▼ to select an item, then press OK.
● If you selected TV ASPECT, press ▲ or ▼ to select a setting,
then press OK.
Choose 4:3 LETTER BOX if you want to see the entire,widened
picture with black bars at the top and bottom of the screen. This
looks like the picture you see when watching movies in a theater. This
setting is possible only if the DVD was recorded in the letterbox or
widescreen format. Choose 4:3 PAN & SCAN for a full height picture,
with both sides trimmed.Some companies refer to this as reformatting
the picture to fit your TV screen and may call it the regular or normal
format. Choose 16:9 WIDE if you connected a widescreen TV to the
DVD player.
Helpful Hint
• Selecting a different TV ASPECT
Setting is only effective if it is available
on the DVD. Check the DVD Disc
Menu or case for details.
• You also can adjust TV ASPECT in the
QUICK SETUP Menu that appears
when you first press SETUP. With
QUICK SETUP selected, press OK.
Press ▼ to select TV ASPECT, then
press OK. Press ▲ or ▼ to choose a
setting, then press OK. Press SETUP
to remove the menu.
The default setting is 4:3 LETTER BOX.
DISPLAY
TV ASPECT
• This unit does not set the TV aspect
automatically.
TV ASPECT
EN - 51
Display (cont’d)
52
● If you selected STILL MODE, press ▲ or ▼ to select a
setting, then press OK. This determines the quality of an image in
still mode. If you select FIELD, still images will be stabilized but coarse
due to the small amount of data. If you select FRAME, the images will
be highly defined due to the simultaneous output of two fields.
The default setting is AUTO.
OPEN/CLOSE
TRACKING
1
4
2
5
8
0
3
6
9
7
CLEAR
TITLE
+10
DISPLAY
STILL MODE
VCR
SETUP
DVD
6
AUTO
FIELD
FRAME
DISC
INPUT
MENU
OK
STILL MODE
Press SETUP to remove the menu.
REW
PLAY
FFW
6
STOP
PAUSE
BACK
Progressive Scan
You may adjust the Progressive Scan compatibility.
Follow the steps 1-4 in the Display setup on page 51.
1
2
OPEN/CLOSE
TRACKING
1
4
2
5
8
0
3
6
9
Press ▲ or ▼ to select PROG. SCAN, then press OK
repeatedly to turn PROG. SCAN ON or OFF. Choose ON if your
TV has Progressive Scan and if the TV is connected to the player’s
COMPONENT VIDEO OUT jacks. Choose OFF otherwise.
The default setting is OFF.
7
CLEAR
TITLE
+10
VCR
Press SETUP to remove the menu.
SETUP
DVD
3
● If PROG. SCAN is ON, this message appears :
DISC
3
INPUT
MENU
Before proceeding...
OK
Make sure your TV has progressive scan.
Connect with component video cable.
NOTE If there is no picture or picture is
2-3
distorted after selecting “YES”
Wait about 15 seconds for auto recovery.
,
REW
PLAY
FFW
Activate Progressive?
NO
YES
STOP
PAUSE
BACK
SELECT
SET
Press ▲ or ▼ to make a selection, then press OK.
If you select NO, the menu disappears and
PROG. SCAN is OFF. If you select YES, this appears :
Helpful Hint
• You can set PROG. SCAN to OFF
either in the DISPLAY Menu or by
pressing and holding PLAY B (DVD)
on the front of the player for more
than 5 seconds.
Confirm again to use progressive scan.
If Picture is good, Select “YES”
.
NO
• You can adjust Progressive Scan
Setting in the QUICK SETUP Menu
that appears when you first press
SETUP. With QUICK SETUP selected,
press OK. Press ▼ to select PROG.
SCAN. Press OK to choose OFF or
ON. Press SETUP to remove the
menu.
YES
SELECT
SET
Confirm your setting, then press OK. The menu will disappear and
the Progressive Scan function will be activated. If you do not press any
buttons for 15 seconds, Progressive Scan will switch to OFF.
EN - 52
Audio
53
Change Audio Settings based on other equipment you connected to the DVD
player or according to your disc sound features. These setting only affect the
Audio from the DVD player of the DVD/VCR.
OPEN/CLOSE
3
1
4
2
5
8
0
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
6
1
2
TRACKING
7
9
While playback is stopped, press SETUP.
The QUICK SETUP Screen will appear.
CLEAR
TITLE
DVD
+10
VCR
SETUP
2,7
3-6
1
DISC
INPUT
MENU
QUICK SETUP
OSD LANGUAGE ENGLISH
TV ASPECT
PROG. SCAN
DOLBY DIGITAL
4:3 LETTER BOX
OFF
BITSTREAM
OK
REW
PLAY
FFW
BACK
AUDIO
Press ◄ or ► to select CUSTOM at the top of the menu, then
STOP
PAUSE
press OK.
3
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
LANGUAGE
SPEED
MODE TIMER SET
AUDIO
ORIGINAL
OFF
SUBTITLE
DISC MENU
OSD LANGUAGE
ENGLISH
ENGLISH
Press ◄ or ► to select
(AUDIO) at the top of the menu,
then press OK.
4
5
Press ▲ or ▼ to select DRC, DOWN SAMPLING, or DOLBY
DIGITAL, then follow step 6 accordingly.
AUDIO
ON
DOWN SAMPLING ON
BITSTREAM
OK
Helpful Hint
• Dolby Digital sound must be available
on the DVD.
● If you selected DRC, press OK repeatedly to turn Dynamic
Range Control (DRC) ON or OFF. Choosing ON compresses
the range of volume by suppressing loud sounds and raising low
sounds. DRC is available only on discs recorded in the Dolby Digital
format. The default setting is ON.
● If you selected DOWN SAMPLING, press OK repeatedly to
choose ON or OFF. Choose ON to down sample the 96 kHz
sound source to 48 kHz. Choose OFF to output the sound source
without any down sampling. DOWN SAMPLING is available only
when the player is connected to a Stereo using the COAXIAL
DIGITAL AUDIO OUT jack as described on page 13. The default
setting is ON.
● If you selected DOLBY DIGITAL, press OK repeatedly to
select BITSTREAM or PCM. Select BITSTREAM if you used the
COAXIAL DIGITAL AUDIO OUT jack to connect the DVD player to
a stereo that is Dolby Digital compatible. Details are on page 13.
Otherwise, choose PCM. The default setting is BITSTREAM.
Press SETUP to remove the menu.
6
• You can adjust DOLBY DIGITAL in the
QUICK SETUP Menu that appears when
you first press SETUP. With QUICK
SETUP selected, press OK. Press ▼ to
select DOLBY DIGITAL. Press OK to
choose BITSTREAM or PCM. Press
SETUP to remove the menu.
• When you play a disc that has
copyright protection, downsampling
will be at 48 kHz, even if you set
DOWN SAMPLING to OFF.
7
EN - 53
Parental Password
54
Parental Controls prevents viewing of DVDs that exceed your rating limits.
This feature will not limit viewing if the DVD is not rated or coded.Check your
DVDs and settings before letting children access the DVD/VCR. You will need
a password to change the Parental Settings or to play a blocked disc. Follow
these steps to change your password.
OPEN/CLOSE
TRACKING
1
4
2
5
8
0
3
6
9
Press DVD to put the DVD/VCR in DVD mode.
4,6
2,7
DVD light will appear on the front of the DVD/VCR.
7
1
2
CLEAR
TITLE
+10
While playback is stopped, press SETUP.
The QUICK SETUP Screen appears.
VCR
SETUP
DVD
DISC
1
INPUT
MENU
QUICK SETUP
OK
OSD LANGUAGE ENGLISH
TV ASPECT
4:3 LETTER BOX
OFF
3-6
PROG. SCAN
DOLBY DIGITAL
BITSTREAM
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
Press ◄ or ► to select CUSTOM, then press OK.
DISPLAY SUBTITLE ZOOM
3
4
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
Press ◄ or ► to select
(PARENTAL), then press OK.
SPEED
MODE TIMER SET
● If this is the first time you set a password, this menu will appear.
PARENTAL
PASSWORD
Please enter a 4-digit password.
Press the Number buttons to enter a 4-digit password.
The password will appear on the screen. Write it down so you will not forget it.
Press OK, and proceed to step 7.
● If you have set a password before, this menu will appear.
PARENTAL
Enter current password.
Helpful Hint
• The default password is 4737. If you
forget your password, press
the Number buttons 4, 7, 3, 7 at step
4. You will be prompted to enter a
new 4-digit password. Use
the Number buttons to enter a new 4-
digit password, then press OK.
PARENTAL LEVEL will reset to ALL.
See page 55 to reset PARENTAL
LEVEL as you desire.
• A power failure will not erase your
password.
Press the Number buttons to enter your current 4-digit
password. Asterisks (*) will appear instead of your password. This
protects its identity. Press OK, and proceed to step 7.
If you like to change the password, press ▲ or ▼ to select
PASSWORD CHANGE, then press OK.
5
6
PARENTAL
PARENTAL LEVEL
ALL
PASSWORD CHANGE
Press the Number buttons to enter a 4-digit password. The
password numbers will appear on the screen.
Write down the password so you will not forget it. Press OK.
The previous menu will reappear.
Press SETUP to remove the menu.
7
EN - 54
Parental Levels
55
Follow these steps to set the rating level for your DVDs.
DVDs whose ratings exceed the level you set will not play.
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OPEN/CLOSE
1
2
1
4
2
5
8
0
3
6
While playback is stopped, press SETUP.
The QUICK SETUP Screen appears.
TRACKING
TITLE
5
2,8
7
9
CLEAR
+10
QUICK SETUP
VCR
SETUP
DVD
OSD LANGUAGE ENGLISH
1
TV ASPECT
PROG. SCAN
DOLBY DIGITAL
4:3 LETTER BOX
OFF
BITSTREAM
DISC
INPUT
MENU
OK
3-4,
6-7
Press ◄ or ► to select CUSTOM at the top of the menu, then
press OK.
REW
PLAY
FFW
3
4
STOP
PAUSE
BACK
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
OSD LANGUAGE
ORIGINAL
OFF
ENGLISH
ENGLISH
RATING EXPLANATIONS
• ALL : Parental Control is inactive;all
discs can play.
Press ◄ or ► to select
then press OK.
(PARENTAL), at the top of the menu,
• 8 [ADULT]: DVD softwares of any
grades (adult/general/children) can be
played back.
PARENTAL
Enter current password.
• 7 [NC-17]: No one under 17 admitted
• 6 [R]: Restricted;under 17 requires
accompanying parent or adult guardian
• 5 [PGR]: Parental Guidance
Recommended
Press the Number buttons to enter your 4-digit password.
• 4 [PG13]: Unsuitable for children
under 13
• 3 [PG]: Parental Guidance suggested
• 2 [G]: General Audience
5
6
Press ▲ or ▼ to select PARENTAL LEVEL, then press OK.
• 1 [KID SAFE]: Suitable for children
PARENTAL
Helpful Hint
PARENTAL LEVEL
ALL
PASSWORD CHANGE
• When you try to play a DVD whose
rating exceeds the level you set,an on-
screen message will indicate the DVD
cannot play. Remove the DVD, then
set PARENTAL LEVEL to ALL. Reload
the DVD and begin playback. Some
DVDs may let you enter your 4-digit
password to begin playback. Follow the
on-screen messages as prompted.
• You cannot use the default password
(4737) to play a DVD.
Press ▲ or ▼ to select a level, then press OK.
The rating levels continue on two menu screens. Press ▲ or ▼
repeatedly to move to the next or previous screen to find the rating level
you want. After making your selection, the previous menu will appear.
The level you selected will appear beside PARENTAL LEVEL.
7
8
PARENTAL
• The resume information will be
cleared if you change the parental level
when the resume information is on.
PARENTAL LEVEL
ALL
8 [ADULT]
7 [NC-17]
6 [R]
5 [PGR]
4 [PG13]
3 [PG]
Press SETUP to remove the menu.
EN - 55
Others
56
You may adjust the Angle Icon, Automatic Power Off,
Dual Playback and Slide Show Settings.
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
OPEN/CLOSE
TRACKING
1
4
2
5
8
0
3
6
9
1
While playback is stopped, press SETUP.
The QUICK SETUP Screen appears.
7
CLEAR
TITLE
2
+10
2
VCR
SETUP
DVD
DISC
1
QUICK SETUP
INPUT
MENU
OSD LANGUAGE ENGLISH
TV ASPECT
4:3 LETTER BOX
OFF
PROG. SCAN
DOLBY DIGITAL
BITSTREAM
OK
3-5
REW
PLAY
FFW
BACK
AUDIO
Press ◄ or ► to select CUSTOM at the top of the menu, then
press OK.
STOP
PAUSE
3
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
LANGUAGE
AUDIO
SUBTITLE
ORIGINAL
OFF
SPEED
MODE TIMER SET
DISC MENU
OSD LANGUAGE
ENGLISH
ENGLISH
Press ◄ or ► to select
(OTHERS), then press OK.
4
5
OTHERS
ANGLE ICON
AUTO POWER OFF ON
DUAL PLAYBACK OFF
ON
SLIDE SHOW
sec
Press ▲ or ▼ to select an item, then press OK.
● If you selected ANGLE ICON, press OK repeatedly to select
ON or OFF. Choose ON to see the Angle icon when multiple
camera angles are available during DVD playback. Details are on
page 40. Choose OFF to disable the Angle icon.
The default setting is ON.
OTHERS
ANGLE ICON
ON
AUTO POWER OFF ON
DUAL PLAYBACK OFF
SLIDE SHOW
sec
ANGLE ICON
EN - 56
Others (cont’d)
57
Instructions continued from the previous
● If you selected AUTO POWER OFF, press OK repeatedly to
choose ON or OFF. Choose ON if you want the player to turn off
when there is no activity at the player or its remote for 25 minutes.
The default setting is ON.
OPEN/CLOSE
1
4
2
5
8
0
3
6
TRACKING
TITLE
7
9
CLEAR
+10
OTHERS
ANGLE ICON
AUTO POWER OFF ON
DUAL PLAYBACK OFF
ON
6
5
VCR
SETUP
DVD
DISC
SLIDE SHOW
sec
INPUT
MENU
OK
AUTO POWER OFF
● If you selected DUAL PLAYBACK, press OK to choose ON
or OFF. This feature lets you play MP3 and JPEG files simultaneously.
The default setting is OFF.
REW
PLAY
FFW
BACK
AUDIO
STOP
PAUSE
DISPLAY SUBTITLE ZOOM
ANGLE
REC
SEARCH REPEAT REPEAT
A-B
OTHERS
ANGLE ICON
AUTO POWER OFF ON
DUAL PLAYBACK OFF
ON
SPEED
MODE TIMER SET
SLIDE SHOW
sec
DUAL PLAYBACK
● If you selected SLIDE SHOW, press ▲ or ▼ to choose 5sec,
10sec or MUSIC, then press OK. This adjusts the playback speed
of the SLIDE SHOW.
Choose 5 sec to display each image for 5 seconds.
Choose 10 sec to display each image for 10 seconds.
Choose MUSIC to display an image for each MP3 sound file playback
when DUAL PLAYBACK is ON.
The default setting is 5 sec.
Helpful Hint
• When MUSIC is selected, the playback
speed of the SLIDE SHOW will be set
to 5 seconds under the conditions
listed below :
OTHERS
SLIDE SHOW
sec
sec
MUSIC
- When DUAL PLAYBACK is OFF.
- When DUAL PLAYBACK is ON, but
only the JPEG files are playing.
SLIDE SHOW
Press SETUP to remove the menu.
6
EN - 57
Information You May Need
Glossary
58
AUDIO IN/OUT Jacks : jacks on the front and back of the DVD/VCR that receive audio from another source (IN) or
send audio to another system (OUT). These jacks are red (right) and white (left).
COAXIAL DIGITAL AUDIO OUT Jack : sends digital audio to a Stereo, allowing you to adjust the volume at the
Stereo. This connection provides the Multi-channel surround sound as heard in movie theaters. This jack on the DVD/VCR
is black.
COMPONENT VIDEO OUT (Y CB/PB
CR/PR) Jacks : jacks on the back of the DVD/VCR that send high-quality DVD
video to a TV with Component Video In jacks. This connection provides the best picture quality for the DVD player of the
DVD/VCR.
Dolby Digital : a surround sound system that provides Multi-channel sound as used in movie theaters.
Dubbing : copying a video cassette using another VCR.
HQ : high quality; a feature in the VCR circuitry which provides enhanced picture detail.
External Input Channel : the channel to which you set your DVD/VCR to receive the signal from the external tuner. If
you connected the external tuner to the AUDIO and VIDEO IN jacks on the front of the DVD/VCR, select L2. If you used
the AUDIO and VIDEO IN jacks on the back of the DVD/VCR, select L1.
OTR : One-Touch Recording; a timed recording on the VCR that starts immediately and records for 30 minutes to 8
hours.
S-Video : produces a clearer DVD picture by sending separate signals for the luminance and the color. S-Video only
provides a picture for the DVD player of the DVD/VCR.
Tape Speeds : how fast the video cassette travels during a recording or playback. The faster the tape speed, the better
the picture quality. Slower tape speeds affect picture quality, but you can record more onto a videotape.
• SP (Standard Playback) – fastest tape speed (recording time for a T120 tape is approximately 2 hours); best picture
quality.
• LP (Long Playback) – average tape speed. You cannot record in LP with this VCR. If tapes were recorded on a different
VCR in LP speed, the tape will play in LP on the DVD/VCR.
• SLP (Super Long Playback) – slowest tape speed (recording time for a T120 tape is approximately 6 hours). This speed
allows the maximum recording on a single videotape.
VIDEO IN/OUT Jacks : jacks on the front and back of the DVD/VCR that receive video from another source (IN) or
send video to other video equipment or a TV (OUT). These jacks are yellow.
EN - 58
Helpful Hints
59
If you are having problems with your product,check this list of problems and possible solutions before requesting service.
You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number of your product
before you call. This information is displayed on the back of the product. Also, please take a moment to identify the
problem you are having, and be prepared to explain this to the representative. If you believe the representative will need to
help you with operations, please stay near the product. Our representatives will be happy to assist you.
The DVD/VCR has no power.
• Make sure the power cord is connected completely to an AC (alternating current) outlet.
• Press y to turn on the DVD/VCR. The DVD/VCR usually turns on in the mode it was in when you turned it off. If there
has been a power failure, it will turn on in VCR mode. Press DVD to put the unit in DVD mode. Press VCR to put the
unit in VCR mode. Or press SOURCE to switch between the two modes.
The remote control will not operate the DVD/VCR.
• Aim the remote control directly at the remote sensor on the front of the DVD/VCR, not toward the TV. Details are on
page 19.
• Remove all obstacles between the remote control and the DVD/VCR.
• Inspect and/or replace the batteries in the remote control. Details are on page 14.
• Use the remote control within 23 feet (7m) of the DVD/VCR.
• When using the DVD player, press DVD, then try the other DVD feature buttons. Press DVD so DVD light appears on
the front of the DVD/VCR. This means the DVD/VCR is in DVD mode.
• To use the VCR, press VCR, then try the other VCR feature buttons. Press VCR so VCR light appears on the front of
the DVD/VCR. This means the DVD/VCR is in VCR mode.
There is no picture in DVD mode.
• Make sure the video cable is connected correctly. You may connect either the yellow video cable (supplied), an optional
S-Video cable,or optional component video cables. Make sure the TV is set to the correct Video In channel (usually the
AUX IN, A/V IN, Auxiliary In, EXT or External In, Component Video In or S-Video In channel). Check your TV owner’s
manual for details. Details are on page 9.
• Insert a DVD that is playable on this DVD/VCR.Details are on page 8.
• Make sure the DVD/VCR is in DVD mode. Press DVD or SOURCE so DVD light appears on the front of the DVD/VCR.
• Check if Progressive Scan is set correctly according to your connection to a TV. Details are on page 9. Enable
Progressive Scan at the DVD player only if you used the Component Video connection to a TV that has Progressive Scan.
Details are on pages 9, 11 and 52.
Disc cannot be played.
• Insert a playable disc. Details are on page 8.
• Place the disc correctly in the disc tray. If the disc is one-sided,place the disc in the tray with the label facing up. If the disc
is two-sided, make sure the label of the side you want to play is facing up.
• Clean the disc. Make sure the disc is not scratched or warped.
• Cancel the Parental Controls, enter the password or change the control level. Details are on pages 54-55.
• Make sure the disc is labeled for use in Region 1 or ALL regions and is NTSC or PAL compatible. Details are on page 8.
There is no sound.
• Connect the audio cable firmly. Make sure the cables are connected to the AUDIO IN jacks on the TV or Stereo. Details
are on pages 9-13.
• Check the Audio Settings of the DVD player. Details are on page 53.
• Check the Audio Settings of the DVD. For example, you may have selected “soundtrack” playback or an unavailable Sound
Setting (such as Dolby Digital). Details are on pages 41 and 53. Try other sound options provided in the DVD Disc Menu.
The picture is distorted.
• Connect the DVD/VCR directly to the TV. Details are on pages 9-13. Do not connect the DVD/VCR to a VCR, then
connect the VCR to the TV. Copyright protection systems in the VCR could distort the picture playing on the DVD/VCR.
• There are some cases where a disc or videotape picture may be distorted slightly because of the quality in which it was
recorded. This is not a malfunction of the DVD/VCR.
• Make sure the disc is compatible with the DVD player of the DVD/VCR. Details are on page 8.
• In case of picture problems with 525 (480) progressive scan output, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p
(480p) DVD player, please contact our customer service center.
• If your TV is not PAL compatible, DVDs recorded in the PAL color system may play only in black and white, the picture
may roll continuously, or the picture may appear distorted.
You cannot change the camera angle of a DVD.
• The DVD might not contain segments recorded from different camera angles. See if multiple angles are available by
referring to the disc case or DVD Disc Menu. Details are on page 40.
EN - 59
Helpful Hints (cont’d)
60
You cannot change the audio or subtitle language of a DVD.
• The DVD does not contain audio or subtitles in the desired language. Not all DVDs contain audio or subtitles in multiple
languages. See if other languages are available by referring to the disc case or DVD Disc Menu. Details are on pages 40-41.
An X appears in the top right corner of the TV screen when you try a DVD feature.
• The operation is not available at the current time or the feature is not available on the disc.Some features are only
available during playback. Others can be accessed only if playback is stopped. Try stopping or playing the disc, then try
the feature again.
The DVD/VCR switches from DVD mode to VCR mode after 25 minutes of no activity.
• When AUTO POWER OFF is set to ON, the DVD/VCR switches itself from DVD mode to VCR mode if disc playback
stops for more than 25 minutes and you press no buttons on the remote or the DVD/VCR. Details are on pages 56-57.
This prevents possible damage to your TV’s picture tube that can occur if a still image is left on too long.
A screen saver appears on the TV screen during DVD mode.
• The screen saver appears when you leave the DVD/VCR in stop mode for about five minutes to protect the TV screen
from burn-in.
You want to use the DVD player during a VCR Timer Recording or while “ ” appears on the display panel.
• Press y to turn on the DVD/VCR. Press DVD to choose DVD mode, then continue with other DVD features as
described in this manual.
A maximum of 999 MP3/Windows Media™ Audio/JPEG files can be recognized.
Power Failure
• Clock and language setting will be lost after 30 seconds of power failure. See pages 20-21 to set up the clock and
language again.
The VCR will not record a TV program.
• This DVD/VCR does not have a tuner to receive TV broadcasting.
• You must connect this DVD/VCR to an external tuner to record TV programs.
• Check the connections between the DVD/VCR and the external tuner. Details are on page 10.
• Put the DVD/VCR in VCR mode. Press VCR or SOURCE so VCR light appears on the front of the DVD/VCR.
• Make sure the video cassette has a record tab. Details are on page 22.
The VCR will not perform a Timer Recording.
• Make sure the recording start and stop times are set correctly. Details are on pages 25-26.
• Make sure a tape is in the VCR and the tape has a record tab. Details are on page 22. If, after programming a Timer
Recording, you press TIMER SET without putting a tape in the DVD/VCR, “ ” will blink on the display panel.
• If the record tab on a tape is missing, the DVD/VCR will eject the tape. “ ” will blink.
• Press TIMER SET to put the DVD/VCR in standby mode for the Timer Recording.
• Make sure the VCR clock is set. Details are on page 20.
• The VCR may not perform or continue a Timer Recording if the power fails.
• Finish programming a Timer Recording at least 5 minutes before it is set to begin.
• 12 p.m. is noon; 12 a.m. is midnight.
There is no picture or the picture is noisy or has streaks during video cassette playback.
• Put the DVD/VCR in VCR mode. Press VCR or SOURCE so VCR light appears on the front of the DVD/VCR.
• Select the correct Video In channel at the TV. Details are on page 9.
• Adjust the tracking. Details are on page 32.
• TVs placed too close to the DVD/VCR can cause interference during tape playback. Move the DVD/VCR away from the TV.
TV programs cannot be watched normally.
• Check the connections between the DVD/VCR and the external tuner. Details are on page 10.
You cannot insert a video cassette.
• Insert the tape,window side up, with the record tab facing you.
• Make sure that there is no tape on the VCR by pressing STOP/EJECT
C
A on the front of the DVD/VCR.
• Gently push on the center of the tape when putting it in the VCR. Never force the tape into the VCR.
• If a Timer Recording is set, you cannot insert a tape without a record tab.
You cannot remove the tape.
• Make sure the power plug is completely connected to a power outlet.
• If a Timer Recording has been set, press TIMER SET on the remote control or STOP/EJECT
cancel the timer standby mode temporarily. “ ” will disappear from the display panel. Then, press STOP/EJECT
C
A on the front panel to
A on
C
the front of the DVD/VCR to eject the tape. Insert another tape and press TIMER SET to reset the Timer Recording.
• Unplug the DVD/VCR power cord for 5 minutes. Then,plug in the power cord again and press y on the DVD/VCR.
Press STOP/EJECT
C
A on the DVD/VCR 3 to 5 times. If the tape still does not eject, you may need to have an
authorized servicer remove the tape.
EN - 60
Helpful Hints (cont’d)
61
DVD/VCR ejects the tape when you press REC I or TIMER SET.
• Make sure the tape has a record tab. Details are on page 22.
Hi-Fi Stereo Sound
• During playback, Hi-Fi audio may normally revert to normal audio when you adjust tracking.
• When connecting the DVD/VCR to a TV with the red and white audio cable, you will only get stereo sound if you
connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the Audio In jacks on your TV, and if the TV is on its
Audio/Video In channel. See your TV owner’s manual for details.
• When you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the Audio In jacks on your TV, the stereo
light on the TV might not glow.
• Only tapes recorded in Hi-Fi audio will play in Hi-Fi audio. Tapes recorded in normal audio will play in monaural (single-
channel) audio.
Cleaning the video heads
• Your DVD/VCR automatically cleans the video heads of the VCR each time you insert a tape. However, the heads may
become dirty. If so, have an authorized servicer clean the video heads. Eventually, the heads may need to be replaced.
The playback picture is too dim, too bright or fluctuates in brightness.
• Some programs may be broadcast with copyright protection technology in order to protect the rights of copyright
owners. This technology is used on programs that are recorded on video cassettes or DVDs, as well as some programs
broadcast by antenna/cable/satellite television channels. Programs broadcast with copyright protection may not record
clearly. Likewise, if you play a tape that is a recording of a copyright protected program, the picture may not be clear.
Tapes of copyright protected programs may have a picture that is dark or dim, or the brightness of the picture may
fluctuate. Therefore, avoid recording or playing copies of copyright protected programs.
EN - 61
Care and Maintenance
Cleaning the DVD/VCR
62
• Wipe the front panel and other exterior surfaces of the DVD/VCR with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the DVD/VCR. Do not spray insecticide liquid near the DVD/
VCR. Such chemicals may discolor the surface or damage the DVD/VCR.
Cleaning a Disc
• Use a soft, dry cloth to wipe the disc.
• Wipe the disc in a straight line from the center to the edge. Never wipe the disc in a circular motion.
• Do not use detergent or abrasive cleaning agents.
• Handle the discs so fingerprints and dust do not adhere to the discs.
• Always store the disc in its protective case when it is not in use.
Checking the Laser
• If the DVD/VCR does not operate as described in this manual, the DVD player’s laser may be dirty. Consult an
Authorized Service Center for inspection and cleaning of the laser.
Caring for Video Cassettes
• Use only cassettes with the
mark.
• Remove any light adhesive stick-on notes from the video cassette before putting the cassette in the VCR. Removable
labels can jam the VCR.
Caring for the VCR’s Video Heads
• Periodic maintenance is required to maintain your DVD/VCR’s excellent performance. The VCR has an Automatic Head
Cleaner. However, the video heads will require replacement eventually. Only an authorized service center should
perform this service.
Specifications
VCR Video Heads
4 heads - Hi-Fi
Power Consumption
Power on : 18W
Power off : 2.95 W
DVD Color System
Operating Temperature
NTSC
41°F (5°C) to 104°F (40°C)
Frequency Response
Relative Humidity
DVD (linear sound) :
20 Hz to 22 kHz (sample rate :48 kHz)
20 Hz to 44 kHz (sample rate :96 kHz)
Audio CD :20 Hz to 20 kHz
30% to 80%
Dimensions
17.1” (W) x 3.7” (H) x 9.2” (D)
(435mm x 94mm x 233mm)
Signal-to-Noise Ratio
Audio CD :100 dB JEITIA
(Japan Electronics and Information Technology Industries
Association)
Weight
5.8 lbs. (2.6 kg)
NOTE : Designs and specifications are subject to change
without notice.
Dynamic Range
DVD (linear sound) :90 dB
Audio CD :85 dB (JEITIA)
Total Distortion Factor
Audio CD :0.03% (JEITIA)
DVD :0.03%
Wow and Flutter
Below the measurement limitation
(±0.001% W PEAK) (JEITIA)
Power Requirement
120V AC +/- 10%, 60 Hz +/- 0.5%
EN - 62
Ninety (90) day Limited Warranty
63
WARRANTY COVERAGE:
This warranty obligation is limited to the terms set forth
below.
a part that has been modified without written permission,
or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
WHO IS COVERED:
This product is warranted to the original purchaser or the per-
son receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
This Limited Warranty does not cover:
Shipping charges to return defective product.
•
•
Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
•
WHAT IS COVERED:
This warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received within
the Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or
most comparable to the original product in current inventory,
or (3) refund the original purchase price of the product.
The Company warrants replacement products or parts provided
under this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes the company’s property. When a
refund is given, your product becomes the company’s property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Damage or claims for products not being available for use, or
for lost data or lost software.
•
•
•
Damage from mishandled shipments or transit accidents when
returning product.
A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
A product used for commercial or institutional purposes
(including but not limited to rental purposes).
•
•
•
Product lost in shipment and no signature verification receipt
can be provided.
Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact Customer Care Center at:
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all
requirements can result in delay.
1-866-309-0846
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to the new products that
can be identified by the trademark, trade name, or logo affixed
to it. This Limited Warranty does not apply to any non-Philips
hardware product or any software, even if packaged or sold
with the product. Non-Philips manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.
The Company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or any non-Philips product or
part not covered by this warranty. Recovery or reinstallation
of programs, data or other information is not covered under
this Limited Warranty.
Some states do not allow the exclusions or limitation of incidental
or consequential damages, or allow limitations on how long
an implied warranty lasts, so the above limitations or exclusions
may not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product,
(b) to damage caused by service performed by anyone other
than an Authorized Service Location, (c) to a product or
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc.
PO Box 2248 Alpharetta, GA 30023-2248
EN - 63
Information Index
64
standby-on button .................................. 19
step-by-step playback ............................. 37
stereo sound........................................... 41
still mode........................................... 51-52
still picture .............................................. 32
stop C button.......................................... 19
stop/eject CA (vcr) button ................... 19
subtitle button ................................. 19, 40
super high speed searching..................... 32
s-video out jack................................ 11, 19
A
I
a-b repeat ............................................... 38
a-b repeat button ............................. 19, 38
ac power cord........................................ 19
angle button...................................... 19, 40
angle icon.......................................... 40, 56
arrow buttons ........................................ 19
audio button..................................... 19, 41
audio in/out jacks ...................... 10, 19, 24
audio settings.......................................... 53
auto power off................................... 56-57
auto repeat............................................. 30
index search ........................................... 31
initializing................................................ 48
input button ..................................... 19, 22
J
jpeg display ............................................. 47
jpeg playback ..................................... 44-45
L
language (dvd) ................................... 49-50
language (vcr) ......................................... 21
lp (long playback) ................................... 58
T
tape
M
automatic playback ........................ 32
automatic rewind, eject................. 32
duplication...................................... 24
eject............................. 16, 19, 32, 60
speed.............................................. 58
time search.............................................. 31
timer recording
canceling......................................... 26
setting....................................... 25-26
timer set button............................... 19, 26
title button....................................... 19, 33
titles......................................................... 33
tracking.................................................... 32
tracks....................................................... 36
tv aspect............................................ 51-52
B
markers .................................................. 39
menus ................................................. 7, 33
mode button .................................... 19, 43
mp3 display............................................. 47
mp3 playback..................................... 44-45
N
back button............................................. 19
bit-rate display........................................ 46
black level ............................................... 48
C
camera angle........................................... 40
cassette compartment............................ 18
chapters.................................................. 35
clear button...................................... 19, 20
clock........................................................ 20
coaxial digital audio out jack............ 13, 19
component video out jacks.............. 11, 19
contents.................................................... 6
controls
dvd/vcr........................................... 19
remote........................................... 19
copyright protection ................... 4, 24, 61
counter ............................................. 21, 30
number buttons ..................................... 19
O
ok button................................................ 19
one-touch recording.............................. 23
open/close A button ....................... 17, 19
P
parental................................................... 54
parental password............................. 54-55
pause button ....................... 19, 32, 37, 42
play button .................................. 16-17, 19
playing discs............................................ 17
playing tapes........................................... 16
program.................................................. 43
progressive scan..................................... 52
V
vcr
button............................................. 19
light................................................. 18
video in/out jacks........................ 10-13, 19
D
disc menu button ............................. 19, 33
disc menus.................................. 33, 49-50
disc tray .................................................. 18
display button....................... 19, 21, 46-47
display messages..................................... 18
display panel ........................................... 18
displays........................................ 21, 46-47
dolby digital............................................. 53
down sampling........................................ 53
drc (dynamic range control).................. 53
dual playback .......................................... 45
duplication (dvd to videotape)............... 29
dvd button.............................................. 19
dvd light .................................................. 18
W
Q
warranty.................................................. 63
Windows Media™ Audio display........... 47
Windows Media™ Audio playback........ 44
quick setup ........................................ 49-53
R
random................................................... 43
rapid play with voice.............................. 34
rear panel ............................................... 19
rec I button................................ 19, 22-23
recording
Z
zoom ....................................................... 42
zoom button .................................... 19, 42
basic............................................... 22
prevention..................................... 22
remote control
batteries ........................................ 14
buttons .......................................... 19
sensor............................................ 19
repeat (discs).......................................... 38
repeat (tape)........................................... 30
repeat button................................... 19, 38
rerecording............................................. 24
resume on .............................................. 37
rew E button........................... 19, 32, 34
F
fast forward ...................................... 32, 34
fast reverse....................................... 32, 34
ffw D button........................................ 19
folder playback ....................................... 45
front panel .............................................. 19
G
glossary................................................... 58
H
S
head cleaner ........................................... 61
helpful hints ....................................... 59-61
hi-fi stereo sound ................................... 33
hookups
safety information ................................. 2-5
satellite link........................................ 27-28
search button....................... 19, 31, 35-36
setup button........................................... 19
skip buttons...................................... 19, 36
slow motion ..................................... 32, 42
slp (super long playback) ....................... 58
source button......................................... 19
sp (standard playback) ........................... 58
specifications .......................................... 62
speed button .................................... 19, 22
cable box/satellite receiver........... 10
component video .......................... 11
stereo ....................................... 12-13
S-video........................................... 11
tv................................................. 9-11
EN - 64
P&F USA, Inc.
PO Box 2248 Alpharetta, GA 30023-2248
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura,
Huixquilucan Edo. de México
C.P. 52787
Meet Philips at the Internet
Printed In China
1VMN32793 ★★★★★
E8E2CCD/E8E2CCH
Philips and Philips Shield are used under
license of Koninklijke Philips Electronics N.V.
*
1
V
M
N
3
2
7
9
3
*
|