QUICK USE AND INSTALLATION GUIDE
TABLE OF CONTENTS
•
For details on product registration, warranty,
and service refer to the other literature included
with your TV information packet.
Getting Started
Warning/Precautions..................................1
Hooking Up Your TV ................................1
12
1
11
2
10
9
3
8
4
7
5
6
Please retain all these materials and keep them
handy for future reference.
Basic TV and Remote Control Operation .................2
How to Use the “INSTALL” Controls ..................3-4
Using the Language Control......................................3
Setting the TV to Auto Program Channels................3
Setting the TV for a Cable or Antenna Signal...........3
Using the Channel Edit Control ................................4
Setting the Channel Name Control............................4
How to use the Smart Clock control .........................4
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO RAIN
OR EXCESSIVE MOISTURE.
NOTE: This Quick Use Guide may be used with
other models. Some of the features listed may or
maynot apply to your TV.
Color Television and Remote Control
BEGIN
SMART
ANTENNA
Note: For homes with separate UHF and VHF anten-
nas you will need an optional combiner to connect to
the TV.
Push the round end of the
adapter (or antenna) onto the
ANTENNA (ANT “A”) plug on
the rear of the TV. If the round
end of the antenna wire is
HELP
If your antenna has a
round cable connector (75
ohm) on the end, then you're
ready to connect it to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter.
Remember,
OUTDOOR/INDOOR
U/V Combiner
be sure to set the
TV for the type sig-
nal you've connect-
ed (see "TUNER"
on page 3 of this
Guide.)
combination (outdoor
Aor indoor) antenna
receives normal broadcast
channels 2-13 (VHF) and
14-69 (UHF). Your con-
nection to such an antenna
is easy since there is only
one antenna plug (75Ω-
ohm) on the back of your
TV - and that’s where the
antenna goes.
UHF
300
Ω
S-VIDEO
VIDEO
L
ANT "A"
75
AUDIO
threaded, screw it down tight.
R/MONO
V
V
HF
IN-2
IN-1
OUT
Back of TV
OR
ADAPTER
Ω
75-300
To order any
75-300 Ohm Adapter
optional accessory
contact your dealer
or call the toll-free
accessory ordering
number:
Combination VHF/UHF Antenna
(Outdoor or Indoor)
300 to 75Ω
Adapter
(483521827003)
1
1-800-851-8885
2
Twin Lead
Wire
ANT "A"
75
S-VIDEO
VIDEO
L
AUDIO
R/MONO
ANT "A"
75
IN-2
IN-1
OUT
OR
Back of TV
Round Cable
75Ω Ohm
BEGIN
SMART
HELP
CABLE TV
If your Cable TV sig-
nal is a single round cable (75
ohm) then you're ready to con-
nect to the TV.
If you have a Cable TV
Converter Box:
Connect the Cable TV signal to
the Cable Signal IN(put) plug
on the Converter.
Connect the Cable TV
cable to the ANTENNA (ANT
“A”) plug on the TV.
If you have a Cable TV
Converter Box:
Connect the OUT(put) plug
from the Converter to the
ANTENNA (ANT “A”) plug on
the TV (connecting cable sup-
plied with the Converter.)
Remember,
CABLE INPUT/CONVERTER
set the TV for the
type signal you've
just connected (see
“TUNER” page 3
of this Set-Up
Guide.)
our Cable TV input
Yinto your home may be
a single (75 ohm) cable, or
a Converter Box installa-
tion. In either case the
connection to the TV is
very easy. Just put the
threaded end of the cable
signal to the TV's antenna
plug and screw it down
hand tight.
Your TV can set
2
itself to select only
the channel numbers
on your Cable sys-
tem (see “AUTO
PROGRAM" page
3). If you use a
ANT "A"
75
S-VIDEO
VIDEO
Cable TV Signal
L
AUDIO
R/MONO
ANT "A"
75
Cable TV
Company
IN-2
IN-1
OUT
Back of TV
OR
Cable Converter box,
set the TV to the
same channel as the
converter's CH 3/4
switch (on the rear of
the converter.)
OUT
IN
Round Cable
75Ω Ohm
Cable TV Converter
Box Connection
1
BEGIN
VCR TO TV
Refer to the Owner's
Manual included with your
VCR for other possible con-
nections and TV/VCR operat-
ing details.
Connect the OUT TO TV
plug on the VCR to the
ANTENNA (ANT “A”) plug
on the TV (connecting cable
supplied with the VCR.)
Connect your
Antenna or Cable TV signal
to the IN FROM ANT(enna)
plug on the VCR.
BASIC CONNECTION
he basic Antenna, or
TCable TV, to VCR to
TV connection is shown to
the right. For more infor-
mation on other hookups
(possible when Cable
Converter/Descrambler
boxes are included) refer
to your accessory VCR
and Cable Converter
Owner's Manual for
300 to 75Ω Ohm
Adapter
Outdoor VHF/UHF
Antenna
OR
Round Cable
75Ω Supplied
OUT TO TV
IN FROM ANT.
with VCR
ANT "A"
75
S-VIDEO
VIDEO
details.
L
AUDIO
R/MONO
ANT "A"
75
IN-2
IN-1
OUT
Cable TV signal
Back of TV
VCR
3135 015 12981
1
HOW TO USE THE INSTALLATION FEATURES
BEGIN
LANGUAGE
or our Spanish and
Press the MENU but-
ton on the remote to show the
on-screen menu.
Press the CURSOR
RIGHT ᮣᮣ button and the
menu will shift highlighting the
LANGUAGE feature.
Press CURSOR RIGHT
ᮣᮣ button to highlight the
Language control options.
Press the CURSOR
DOWN ■ button four times to
select the INSTALL menu.
FFrench speaking TV own-
ers an on-screen LANGUAGE
option is present. With the
LANGUAGE control you can
set the TV’s on-screen menu to
be shown in either English,
Spanish, or French.
Press the CURSOR UP
ᮣ or DOWN ■ buttons to
select ENGLISH, ESPANOL
(Spanish), or FRANCAIS
(French).
.
REVIEW
.
LANGUAGE
TUNER
PICTURE
SOUND
.
.
INSTALL
.
AUTO PROGRAM
CHANNEL EDIT
NAME
FEATURES
INSTALL
.
..
ENGLISH
ESPANOL
.
.
.
.
.
.
.
.
LANGUAGE
TUNER
INSTALAR
.
.. .
ESPANOL
SMART CLOCK
.
IDIOMA
FRANCAIS
AUTO PROGRAM
CHANNEL EDIT
NAME
.
INSTALL
.
SINTONIA
.
.. .
FRANCAIS
SLEEP
.
AUTO PROGRAM
.
TV
LANGUE
A/V
POWER
VCR
ST
A
TUS/EXIT
.
VCR
ED. DE CANAL
SMART CLOCK
.
CC
INCREDIBLE
RECORD
ACC
SYNTON
TV/VCR-CLOCK
MUL
STEREO
TI
.
NOMBRE
A/CH
MEDIA
.
AUTO PROGRAM
1
.
SMART CLOCK
.
SMAR
CHANNEL EDIT
T
SOUND
ENU
SMAR
.
T
NOM DU CANAL
PICTURE
SURF
.
SMART CLOCK
VOL
CH
SMART HELP
3
2
5
Remember, the
text. It does not change the
other on-screen text features
such as Closed Caption (CC)
TV shows.
Pressing the STATUS/EXIT
button after making adjust-
ments to the TV will remove
the menu from the screen.
4
Language control only
makes the TV’s on-screen
MENU items appear in
English, Spanish, or French
BEGIN
AUTO PROGRAM
Press CURSOR DOWN
■ button to highlight the
AUTO PROGRAM control.
Press the CURSOR
RIGHT ᮣᮣ button and the
menu will shift highlighting the
LANGUAGE feature.
Press the MENU but-
ton on the remote to show the
on-screen menu.
Press the CURSOR
DOWN ■ button four times to
select the INSTALL menu.
our TV can automatically
Yset itself for local area (or
Cable TV) channels. This
makes it easy for you to select
only the TV stations in your
area when the CHANNEL (+),
(–) buttons are pressed.
Press the CURSOR
RIGHT ᮣᮣ button to start
the Auto Program scanning of
channels
.
REVIEW
.
LANGUAGE
PICTURE
.
TUNER
SOUND
.
INSTALL
.
AUTO PROGRAM
CHANNEL EDIT
NAME
FEATURES
.
..
.
INSTALL
.
.
.
.
.
.
.
INSTALL
LANGUAGE
TUNER
.
..
AUTO PROGRAM
.
SMART CLOCK
.
.
.
.
INSTALL
AUTO PROGRAM
CHANNEL EDIT
NAME
.
..
CABLE
12
TUNER
.
.
.
.
.
.
SLEEP
LANGUAGE
CHANNEL
PLEASE WAIT
.
TV
A/V
POWER
VCR
ST
TUNER
A
TUS/EXIT
VCR
SMART CLOCK
CC
INCREDIBLE
RECORD
ACC
TV/VCR-CLOCK
MUL
STEREO
AUTO PROGRAM
CHANNEL EDIT
NAME
TI
A/CH
MEDIA
1
SMAR
T
SOUND
ENU
SMAR
T
PICTURE
SMART CLOCK
SURF
VOL
CH
3
2
SMART HELP
Try it out. Press the
Remember, an antenna or cable If you want to delete any unwant-
CHANNEL (+), (–) but-
tons and see which channels
you can select.
TV signal must be first con-
nected to your TV.
ed channels from the TV’s mem-
ory, see the CHANNEL EDIT
section on the next page.
BEGIN
TUNER
Press the CURSOR
DOWN ■ button four times to
select the INSTALL menu.
Press the MENU but-
ton on the remote to show the
on-screen menu.
Press the CURSOR
RIGHT ᮣᮣ button and the
menu will shift highlighting the
LANGUAGE feature.
Press the CURSOR
RIGHT ᮣᮣ button to high-
light the TUNER options
ou need to make sure the
YTV is set to pick up either
Cable TV or ANtenna signals.
In other words, the TV needs
to know if you want to receive
channels coming from a
Cable TV signal or a normal
Antenna signal connected to
the TV’s ANT Input.
Press the CURSOR UP
ᮣ or the CURSOR DOWN
■ button to select either
CABLE, AUTO or
Press the CURSOR
DOWN ■ button to highlight
the TUNER control.
.
REVIEW
.
LANGUAGE
TUNER
PICTURE
SOUND
ANTENNA
.
.
INSTALL
.
AUTO PROGRAM
CHANNEL EDIT
NAME
FEATURES
INSTALL
.
..
ENGLISH
ESPANOL
.
.
.
.
.
.
.
.
LANGUAGE
TUNER
INSTALL
.
..
.
INSTALL
SMART CLOCK
.
.
.
.
.
.
AUTO PROGRAM
CHANNEL EDIT
NAME
LANGUAGE
TUNER
.
..
CABLE
.
INSTALL
.
LANGUAGE
SLEEP
AUTO PROGRAM
CHANNEL EDIT
NAME
.
..
TV
.TUNER .CABLE
A/V
POWER
VCR
ST
A
TUS/EXIT
VCR
SMART CLOCK
CC
INCREDIBLE
.
RECOR
ACC
LANGUAGE
TV/VCR-CLOCK
.
AUTO PROGRAM
STEREO
MUL
TI
A/CH
DIA
.TUNER .AUTO
.
CHANNEL EDIT
1
VOL
6
SMART CLOCK
.
SMAR
AUTO PROGRAM
T
.
NAME
SOUND
MENU
SMAR
T
.
PICTURE
SURF
SMART CLOCK
.
.
INSTALL
.
..
.
M
.
CH
LANGUAGE
.TUNER .ANTENNA
3
SMART HELP
2
.
AUTO PROGRAM
5
4
.
CHANNEL EDIT
When CABLE is
selected, channels 1-125
are available.
When ANTENNA is selected,
channels 2-69 are available.
.
NAME
.
SMART CLOCK
3
HOW TO USE THE INSTALLATION FEATURES
BEGIN
CHANNEL EDIT
Press the CURSOR
RIGHT ᮣᮣ button and the
menu will shift highlighting the
LANGUAGE feature.
Press the MENU but-
ton on the remote to show the
on-screen menu.
Press the CURSOR
RIGHT ᮣᮣ button to highlight
the CHANNEL EDIT options.
Press the the CURSOR
DOWN ■ button to highlight
the ADD/DELETE option.
hannel Edit makes it easy
Cfor you to ADD or
DELETE channels from the
list of channels stored in the
TV’s memory.
Press the CURSOR
DOWN ■ button four times to
select the INSTALL menu.
Press the CURSOR UP
ᮣ or DOWN ■ button to
ADD or DELETE the channel
from memory.
Select the channel you
want to ADD or DELETE with
the CH (+) or (–) buttons. (OR,
use the Number buttons.)
Press the CURSOR
DOWN ■ button to highlight
the CHANNEL EDIT control.
To clear the screen, press the
STATUS/EXIT button.
.
REVIEW
.
LANGUAGE
TUNER
PICTURE
SOUND
.
.
INSTALL
.
AUTO PROGRAM
CHANNEL EDIT
NAME
FEATURES
INSTALL
.
..
.
INSTALL
.
.
.
.
.
.
.
LANGUAGE
.
..
CHANNEL EDIT
.
INSTALL
TUNER
.
.
.
.
.
..
SMART CLOCK
CHANNEL EDIT
.
AUTO PROGRAM
CHANNEL EDIT CHANNEL
INSTALL
.
.
.
.
.
..
CHANNEL EDIT
SLEEP
.
.
.
.
NAME
ADD
.
TV
CHANNEL
12
A/V
POWER
VCR
ST
8
A
TUS/EXIT
VCR
SMART CLOCK
.
CC
INCREDIBLE
RECORD
ACC
ADD
TV/VCR-CLOCK
.
STEREO
MUL
CHANNEL
12
TI
A/CH
MEDIA
.
1
ADD
.
CHANNEL
12
AR
.
SOUND
MENU
DELETE
SMAR
T
PICTURE
SURF
VOL
6
MU
CH
3
2
8
5
4
7
6
BEGIN
NAME
Press the CURSOR
DOWN ■ button to highlight
the NAME control.
Using the CURSOR UP
Once you have selected a
Press the MENU but-
ton on the remote to show the
on-screen menu.
he channel NAME feature
Tallows you to list the
ᮣ or DOWN ■ buttons, scroll
through a list of channel names
provided in the TV’s memory.
name for the channel, press
the MENU button to SAVE
the name in the TV’s memory.
“call” letters of your favorite
stations to their channel num-
bers when they appear on the
Press the CURSOR
DOWN ■ button four times
to select the INSTALL menu.
Press the STATUS/EXIT
button to clear the menu from
the screen
Press the CURSOR
RIGHTᮣᮣ button to high-
light the NAME options area.
OR
screen. The TV has in it’s mem-
ory a list of the 50 most popu-
lar channel names (Example:
ABC, NBC, FOX, etc.) You can
also center a custom name (up
to four digits).
You can also enter a channel
name manually. Press the
CURSOR RIGHT ᮣᮣ but-
ton again, then use the CUR-
SOR UP ᮣ and DOWN ■
buttons to scroll through a list
of options for the first digit.
Press the CURSOR RIGHT
ᮣᮣ button and repeat for the
second, third, and fourth digit.
Press the CURSOR
RIGHT ᮣᮣ button and the
menu will shift highlighting the
LANGUAGE feature.
.
REVIEW
.
LANGUAGE
TUNER
PICTURE
SOUND
.
.
INSTALL
.
.
AUTO PROGRAM
CHANNEL EDIT
NAME
INSTALL
FEATURES
INSTALL
.
..
.
6
12:00 PM
STEREO
INSTALL
.
..
.
.
.
.
.
.
.
LANGUAGE
TUNER
.
CBS
..
.
.
.
.
.
.
LANGUAGE
.
.
.
.
.
.
LANGUAGE
TUNER
SMART CLOCK
S
L
E
AUTO PROGRAM
CHANNEL EDIT
NAME
12
E
P
TUNER
T
V
AUTO PROGRAM
CHANNEL EDIT
A
/
V
P
O
W
E
V
S
R
C
T
6
R
A
T
U
V
S
/
C
E
R
X
AUTO PROGRAM
CHANNEL EDIT
I
T
C
I
C
R
N
A
E
C
C
C
R
C
O
E
R
D
T
V
D
I
/
V
B
L
E
C
R
-
C
L
O
S
M
C
T
U
K
E
R
L
T
E
O
I
A
/C
M
E
H
D
.
I
A
NAME
PERSONAL
1
.
SMART CLOCK
NAME
C
M
A
SMART CLC
S
O
U
N
D
M
E
SMART CLC
N
S
U
M
A
R
T
P
I
C
T
U
R
S
E
U
R
F
V
O
L
6
PERSONAL
M
C
H
.
ABC
.
CBS
ACTS
AMC
3
2
5
4
6
6
BEGIN
SMART CLOCK
Press the MENU but-
ton on the remote to show the
on-screen menu.
Press the CURSOR
Press the CURSOR
DOWN ■ button to highlight
the SMART CLOCK control.
Press the CURSOR
DOWN ■ button four times to
select the INSTALL menu.
mart Clock can automati-
RIGHT ᮣᮣ button and the
menu will shift highlighting the
LANGUAGE feature.
Scally set the TV’s on-
screen clock. Since the time is
received from a broadcast sig-
nal, be sure that a Cable TV
or Antenna signal is present
before attempting to use the
Smart Clock feature.
Press the CURSOR
RIGHT ᮣᮣ button to start
the SMART CLOCK feature.
Just follow the on-screen
This TV contains a clock which
can automatically be set
through the SMART CLOCK Feature
.
INSTALL
.
REVIEW
.
..
.
LANGUAGE
TUNER
PICTURE
SOUND
.
.
.
.
.
.
LANGUAGE
AUTO PROGRAM
TUNER
.
.
AUTO PROGRAM
CHANNEL EDIT
NAME
FEATURES
INSTALL
.
instructions to set the clock.
CHANNEL EDIT
NAME
SMART CLOCK
SMART CLOCK
Press ">" to Continue
SET TIME
Time was not found on channel
The time is broadcast by certain TV
stations. We suggest trying PBS first
Daylight Savings Time
Press " " to select the
time zone that you live in
Follow these
on-screen
instructions to
set the
SmartClock
AUTO
MANUAL
Enter another channel
Set time Manually
YES
NO
Enter the PBS channel
10
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
Please wait
Press "
" to select
Press "
" to select
Press "
Press ">" to Continue
" to select
Automatically
OR
Press ">" to Continue
Press ">" to Continue
Press ">" to Continue
Press ">" to Continue
SET TIME
Time was found
The time is broadcast by certain TV
stations. We suggest trying PBS first.
Follow these
on-screen
instructions to
set the
SmartClock
Manually
Note: When setting the
clock manually, use the
number buttons on the
remote to enter the time.
Don’t forget to set AM or
PM with the Cursor UP or
DOWN button.
12:30 PM
12:30 PM
Enter the PBS channel
10
AUTO
MANUAL
Press "
" to set AM/PM
Press "
" to set AM/PM
Press "
" to set AM/PM
Press ">" to Continue
Press ">" to Continue
Press ">" to Continue
Press ">" to Continue
Press ">" to Continue
4
|