BLU-RAY DISC PLAYER
BDP5012
Troubleshooting
No reaction to the remote control.
Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries correctly.
Quick Start Guide
Insert new batteries in the remote control.
Cannot play back a disc.
Make sure that the product supports the disc.
Make sure that the Blu-ray Disc player supports the region code of the DVD or BD.
(BD: A: DVD: All or 1)
Connections
1
2
3
For DVD+RW/+R, make sure that the disc is finalized.
Clean the disc.
No video signal on the display device.
Basic Setup
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution using [HDMI].
Enjoy
Press and hold [B (PLAY)] on the front panel for 5 seconds to change the setting back
to its default.
No 5.1-channel audio from the loudspeakers of the audio system.
Does the disc contain 5.1-channel audio? The 5.1-channel audio is not available when
the disc does not contain it.
Does the audio system support 5.1-channel audio? The 5.1-channel audio is not
available when the audio system does not contain it.
What’s in the box?
In the settings menu, set “HDMI Audio” to “Off”.
User Manual
Blu-ray Disc Player
Remote Control with
Batteries (AAA x 2)
User Manual
Need help?
User Manual
See the user manual that came with your Philips Blu-ray Disc
Player.
HDMI cable (High Speed HDMI Cable)
RCA Audio / Video Cables
Registration Card
Quick Start Guide
Philips and Philips Shield are used
under license of Koninklijke Philips
Electronics NV.
Online
Hotline
Call 1-866-309-0866 for our operators.
Printed in China
JpnMF-0914/F7-3
E5K16UD_E5K17UD
1VMN27440A ★★
Be responsible
Respect copyrights
|