Philips A VOIP841 User Manual

XtraHS_QSG_VOIP841_UK.qxd 12.07.2007 18:35 Seite 1  
Connect  
Install  
What’s in the box  
1
2
Two 750mAh  
AAA NiMH  
batteries  
Connect the charger  
A
Register the handset  
Verify the signal strength  
Power supply for  
charger  
A
B
Insert the plug of the charger  
power adapter into the socket on  
the bottom of the charger.  
Plug the power adapter into your  
power outlet.  
Registration allows communication  
between the base unit and  
handset(s). If the handset cannot  
communicate with its base, you will  
not be able to make any call or use  
many of the functions and features on  
the phone.  
The signal icon  
displays the link  
status between the handset and the  
base unit.  
Signal icon  
:The handset and base  
unit are linked.They can communi-  
cate.  
No signal icon  
:The handset and  
Reg.  
Handset  
Battery door  
User manual  
1.Press  
. Register shall be  
Charger  
base unit have lost link.They are not  
able to communicate.Take your  
handset closer to the base unit to  
reconnect the link.  
If you move too far away from the  
base unit while you are on the  
phone, you will hear warning tones  
notifying you that the handset is  
almost out of range - lost link.Take  
the handset closer to the base unit  
or your call will be cut off shortly  
after the warning.  
highlighted.  
2.Enter the system PIN (Default:  
Insert batteries  
B
Clear  
0000). Use  
errors.  
to correct typing  
Place the 2 rechargeable NiMH  
AAA batteries, observing their  
polarities, into the battery  
compartment on the handset.  
Slide the battery door firmly into  
place.  
Enter  
3.Press  
to confirm.  
Your handset starts searching for  
the base.  
Quick start guide  
4.Press  
on the base unit until the  
two indications turn off.  
If registration is successful, the  
signal icon  
Charge handset  
displays steadily.  
C
What else will you need  
Before first use, put the handset  
on the charger and charge  
batteries for 14 hours.  
Note :  
Tip :  
If your handset has lost link, you  
will not be able to make or  
receive any call. In addition, you  
will not be able to carry out  
many of the phone functions and  
features.  
If registration failed, repeat the  
above procedure.  
14  
Note :  
The base can register up to 4  
handsets, then the base unit  
registration memory is full. If you  
attempt to register an additional  
handset, the registration process  
will be aborted.  
AVOIP841  

IBM THINKCENTRE 8138 User Manual
KitchenAid KFGS306V User Manual
LG Electronics L194WT User Manual
LG Electronics N195WU User Manual
Motorola Crib Toy MTM5400 User Manual
Novatel SUPERSTAR II OM 20000077 User Manual
Palsonic 5140TS User Manual
Panasonic LQ MD800 User Manual
Panasonic NN CD987W User Manual
Philips dvp7400 User Manual