Register your product and get support at
32PFL4907
26PFL4907
22PFL4907
EN: For further assistance, call the customer support service in your country.
• To obtain assistance, contact Philips Customer Care Center;
In the U.S.A., Canada, Puerto Rico, or the U.S.Virgin Islands 1 866 309 0843
México D.F. and Área Metropolitana; 58 87 97 36
EN User Manual
Interior de la Republica; 01 800 839 19 89
ES Manual del Usuario
FR Manuel d’Utilisation
ES: Para obtener más información, llame al servicio de soporte al cliente de su
país.
• Para obtener asistencia, comuníquese con Centro de atención al cliente de Philips;
En los Estados Unidos, en Canadá, Puerto Rico o en las IslasVírgenes de los Estados Unidos;
1 866 309 0843
México D.F. y Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
FR: Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service
à la clientèle de votre pays.
• Pour obtenir de l’aide, communiquez avec le centre de service à la clientèle Philips au;
Dans le États-Unis, au Canada, à Puerto Rico ou aux ÎlesVierges américaines; 1 866 309 0843
México D.F. et Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
English
3
Return your Product Registration Card or visit at
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.
Complete and return your Product Registration Card at once or visit at www.philips.com/support to ensure:
*Product Safety Notification
By registering your product, you'll receive notification -
directly from the manufacturer - in the rare case of a
product recall or safety defect.
*Additional Benefits
Registering your product guarantees that you'll receive
all of the privileges to which you're entitled, including
special money-saving offers.
Know these safety symbols
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the apparatus’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the apparatus.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall
not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
CAUTION:
ATTENTION
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
:
Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
English
4
ImportantꢀSafetyꢀInstructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Note to the CATV system installer:
8. Do not install near any heat sources such as radiators, heat registers,
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug.A polarized plug has two blades with one wider than the
other.A grounding type plug has two blades and a third grounding
prong.The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Example of Antenna Grounding as per NEC − National
Electric Code
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
GROUND CLAMP
ANTENNA LEAD IN WIRE
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus.When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
ANTENNA DISCHARGE
UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRIC SERVICE
ELECTRODE SYSTEM
EQUIPMENT
(NEC ART 250, PART H)
P&F USA is not liable for these types of accidents or injury noted
below.
Wall Mount Bracket Kit
Brand:ꢀ SANUS
Modelꢀ#
Screwꢀdimension
•
•
Install the Wall Mount Bracket on a sturdy vertical wall.
If installed onto a ceiling or slanted wall, theTV and Wall Mount
Bracket may fall which could result in a severe injury.
22PFL4907
SAN10b
M4 x 0.472” (12mm)
For 26 inch TVs, screws w/washers are required. (sold separately)
•
Do not use screws that are longer or shorter than their
specified length. If screws too long are used this may cause
mechanical or electrical damage inside theTV set. If screws too
short are used this may cause theTV set to fall.
M4 x 0.472” (12mm)
26PFL4907
SAN213b
+
Washer 0.039” (T1mm)
•
•
•
Do not fasten the screws by excessive force.This may damage
the product or cause the product to fall, leading to an injury.
For safety reasons use 2 people to mount theTV onto a Wall
Mounting Bracket.
Do not mount theTV onto the Wall Mounting Bracket while
yourTV is plugged in orTurned On. It may result in an electrical
shock injury.
DoꢀNOTꢀuseꢀscrewsꢀ
packedꢀwithꢀWallꢀMountꢀBracketꢀKit
For 32 inch TVs, you need to purchase screws
separately with dimensions described below.
32PFL4907
VM200s
M4 x 0.472” (12mm)
When installing the unit on the wall, allow this much space.
•
•
•
The recommended Wall Mount Bracket Kit (sold separately)
allows the mounting of theTV on the wall.
For detailed information on installing the wall mount, refer to
the Wall Mount Instruction Book.
P&F USA is not responsible for any damage to the product or
injury to yourself or others if you elect to install theTV Wall
Mount Bracket or mount theTV onto the Bracket on your own.
Top:
11.8 inches (30cm)
5.9 inches (15cm)
3.9 inches (10cm)
Left and right side:
Bottom:
•
The Wall Mount Bracket must be installed by experts.
English
5
Modifications
1 Notice
This apparatus may generate or use radio frequency energy. Changes or
modifications to this apparatus may cause harmful interference
Trademarks are the property of Koninklijke Philips Electronics N.V. or
their respective owners.
unless the modifications are expressly approved in the User Manual.
The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
P&F USA reserves the right to change products at any time without
being obliged to adjust earlier supplies accordingly.
Cables
The material in this User Manual is believed adequate for the intended
use of the system. If the product or its individual modules or procedures
are used for purposes other than those specified herein, confirmation
of their validity and suitability must be obtained. P&F USA warrants
that the material itself does not infringe any United States patents. No
further warranty is expressed or implied.
Connections to this device must be made with shielded cables with
metallic RFI/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canadian notice
This Class B Digital apparatus complies with Canadian ICES-003.
Standard Television Receiving Apparatus, Canada BETS-7/NTMR-7.
P&F USA cannot be held responsible neither for any errors in the
content of this document nor for any problems as a result of the
content in this document. Errors reported to P&F USA will be adapted
and published on the P&F USA support website as soon as possible.
TheꢀfollowingꢀFCC/ICꢀRSS-GenꢀisꢀdescriptionꢀofꢀUSBꢀ
WirelessꢀLANꢀadapter.
Pixel characteristics
FCC Caution:Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
This LCD product has a high number of color pixels.Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen.This is a
structural property of the display (within common industry standards)
and is not a malfunction.
Country Code Statement
For product available in the USA market, only channel 1~11 can be
operated. Selection of other channels is not possible.
To maintain compliance with FCC RF exposure requirements, use
only belt-clips, holsters or similar accessories that do not contain
metallic components in its assembly.The use of accessories that do
not satisfy these requirements may not comply with FCC RF exposure
requirements and should be avoided.
Warranty
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Service
Centers and official repair shops. Failure to do so shall void any
warranty, stated or implied.
Any operation expressly prohibited in this User Manual, any adjustments
or assembly procedures not recommended or authorized in this User
Manual shall void the warranty.
FCC Radiation Exposure Statement
This equipment is compliance with SAR for general population/
uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been
tested in accordance with the measurement methods and procedures
specified in OET Bulletin 65 Supplement C.This equipment should
be installed and operated with minimum distance 2.5cm between the
radiator & your body.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B Digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by Turning the equipment Off and
On, the user is encouraged to try to correct the interference by one
or more of the following measures:
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference and (2) this device must accept
any interference, including interference that may cause undesired
operation of the device.
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio or television technician
for help.
Declaration of Conformity
Trade Name:
PHILIPS
Responsible Party: P&F USA, Inc.
Model:
32PFL4907, 26PFL4907, 22PFL4907
Address:
PO Box 2248,Alpharetta, GA 30023-2248
U.S.A.
Telephone Number: 1 866 309 0843
English
6
Copyright
Twitter is a trademark of Twitter, Inc.
All other registered and unregistered trademarks are the property of
their respective owners.
The terms HDMI and HDMI High-
Definition Multimedia Interface, and
the HDMI Logo are trademarks
or registered trademarks of HDMI
Licensing LLC in the United States and
other countries.
vTuner is a trademark of Nothing Else
Matters Software, Ltd.
Portions of this software are copyright ©The FreeType Project
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
The American Academy of Pediatrics discourages television viewing for
children younger than two years of age.
is a trademark of SRS Labs, Inc.
TruSurround XT technology is
incorporated under license from SRS
Labs, Inc.
SRSTruSurround XT® creates a truly
immersive surround sound experience
with rich bass and clear dialog from
only two speakers.
ENERGY STAR® is a joint program
of the U.S. Environmental Protection
Agency and the U.S. Department of
Energy helping us all save money and
protect the environment through
energy efficient products and practices.
Consumer Notice:
ThisTV has been set to maximize energy efficiency while delivering the
best possible picture using the factory installed home mode settings.
Changing or enabling other features in thisTV (e.g. brightened
backlighting) will possibly increase energy consumption beyond the
original ENERGY STAR® qualified limits.
DLNA®, the DLNA Logo and DLNA
CERTIFIED® are trademarks, service
marks, or certification marks of the
Digital Living Network Alliance.
Netflix and the Netflix logo are
trademarks or registered trademarks
of Netflix, Inc.
Film Fresh and the Film Fresh logo are
registered trademarks of Film Fresh Inc.
VUDUTM is a trademark of VUDU, Inc.
YouTube and theYouTube logo are
trademarks of Google Inc.
CloudTV™ (CloudTV™ by
ActiveVideo®) technology provided
under license from ActiveVideo
Networks, Inc. U.S. and Foreign Patents
apply. CloudTV™ and the“CloudTV™”
logo are proprietary trademarks of
ActiveVideo Networks, Inc.
PANDORA, the PANDORA logo,
and the Pandora trade dress are
trademarks or registered trademarks
of Pandora Media, Inc. Used with
permission.
English
7
2 Important
Environmental care
Positioning theTV
•
•
•
•
Large screenTVs are heavy. 2 people are required to carry and
handle a large screenTV.
Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
Install the unit in a horizontal and stable
position.
Do not install the unit in direct sunlight
or in a place subject to dust or strong
vibration.
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle the
packaging.
For product recycling information, please visit - www.recycle.philips.com
End of life directives
•
Depending on the environment, the temperature of this unit may
increase slightly.This is not a malfunction.
•
•
•
Avoid a place with drastic temperature changes.
Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the
picture and/or sound may be generated if the unit is placed too
close to them. In this case, please ensure enough space between
the external devices and the unit.
Do not insert the AC power cord into the power socket outlet
before all the connections are made.
Ensure that you always have easy access to the AC power cord or
plug to disconnect theTV from the power.
Before you move theTV, disconnect attached cables to prevent
damage to connectors.
Philips pays a lot of attention to produce environment-friendly products
in green focal areas.Your newTV contains materials which can be
recycled and reused.At the end of its life, specialized companies can
dismantle the discardedTV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your oldTV according to local regulations.
•
•
•
•
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and
cadmium. Nevertheless, in many areas batteries may not be disposed
of with your household waste. Please ensure you dispose of batteries
according to local regulations.
Be sure to unplug the AC power cord from the AC outlet before
moving or carrying the unit.
Regulatory notices
Do not place the unit on the furniture that is capable of being tilted
by a child and an adult leaning, pulling, standing or climbing on it.
A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this
apparatus.
Press to Turn the unit On and go into Standby mode.
To completely Turn Off the unit, you must unplug the AC power cord.
Disconnect the AC plug to shut the unit off when trouble is found or
not in use.The AC plug shall remain readily available.
Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and explosion.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING: Batteries (battery pack or battery installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
WARNING: To prevent injury, this apparatus must be securely
attached to the furniture/wall in accordance with the
instructions.Tipping, shaking, or rocking the unit may
cause injury/death.
English
8
3 Get started
Supplied accessories
User Manual
Quick Start guide
Registration card
IMPORTANT
Features
Quick
•
DTV/TV/CATV
Start
You can use your remote control to select channels which are broadcast in
Digital format and conventional Analog format.Also, cable subscribers can
access their cableTV channels.
Box-inserts
•
•
•
Information display
You can display the title, contents and other information of the current
program on theTV screen.
AutoProgram
This unit automatically scans and memorizes channels available in your area,
eliminating difficult setup procedures.
Remote Control and
batteries (AAA, 1.5V x 2)
TV base and screws
Net TV
This unit lets you enjoy Internet services. Use the remote control to
browse the NetTV pages.You can play movies and much more, all
from yourTV screen.
Screws packed with this unit:
Model
Quantity
Size
•
•
Child lock
32PFL4907
26PFL4907
22PFL4907
3
2
This feature allows you to block children’s access to inappropriate
programs.
M4 x 14
Closed Caption decoder
Built-in Closed Caption decoder displays text for Closed Caption
supported programs.
•
•
MTS/SAP tuner
Cable management tie
USB wireless LAN
adapter
Audio can be selected from the remote control.
Auto Standby
If there is no Input signal and no operation for 15 minutes, the unit will go
into Standby mode automatically.
•
•
Sleep timer
You can set the unit to go into Standby mode after a specific amount of
time.
Note
Choices for on-screen language
Select your on-screen language: English, Spanish or French.
•
•
If you lose the screws, please purchase the above-mentioned Phillips head screws at
your local store.
If you need to replace these accessories, please refer to the part name or No. with the
illustrations and call our toll free customer support line found on the cover of this User
Manual.
•
•
Stereo sound function
PLL frequency synthesized tuning
Provides free and easy channel selection and lets you tune directly to any
channel using the number and decimal point “•” buttons on the remote
control.
When using a universal remote control to operate this unit.
Make sure the component code on your universal remote control is set to our brand.
Refer to the instruction book accompanying your remote control for more details.
•
•
•
Various adjustment for picture and sound
Customizes image quality suitable for your room and sets your sound
preference.
•
We do not guarantee 100% interoperability with all universal remote controls.
EasyLink via HDMI link
EasyLink allows your other HDMI link devices to be controlled by the
HDMI cable connected to yourTV.
Symbols used in this User Manual
The following is the description for the symbols used in this User
Manual. Description refers to:
•
•
HDMI Input
HDMI-DVI Input
If your video device has DVI Output jack, use an HDMI-DVI conversion
cable to connect the unit.
DigitalꢀTVꢀoperation
•
•
•
•
ComponentVideo Input
PC Input
AV Input
Analog/CableꢀTVꢀoperation
•
If neither symbol appears, the operation is applicable to both.
USB terminal
The picture (JPEG), music (MP3) and video (MPEG) files stored on a USB
Memory Stick can be played back on this unit.
•
•
Digital Audio Output
Headphone Audio Output
English
9
Attaching the base
Managing cables
You must attach the base to the unit to have it as a table top unit.
Be sure the front and rear of the base match the proper direction.
For large screenTVs, at least 2 people are required for these steps.
Route your antenna cable and all other cables through the cable
management tie at the back of theTV.
The holder helps keep your cables tidy and easily manageable.
1
1 Attach the cable management tie as illustrated below.
1
2
1
2
2
2 Pass cables through the cable management tie to avoid tangles.
32"/26"
x
x
3
2
22"
Note
•
Make sure to use a table which can support the weight of this unit and is larger than
this unit.
•
•
Make sure the table is in a stable location.
When attaching the base, ensure that “FRONT” with “arrow” written on the bottom of
the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.
•
•
When attaching the base, ensure that all screws are tightly fastened. If the base is not
properly attached, it could cause the unit to fall, resulting in injuries as well as damage
to the unit.
To remove the base from this unit, unscrew the Phillips head screws in step 2.
Be careful not to drop the base when you remove it.
Installing the remote control batteries
1 Slide the battery cover off the back of the remote control.
2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −
ends of the batteries line up with the markings inside the case.
3 Slide the cover back into position.
Note
•
Remove the batteries if not using the remote control for an extended period of time.
English
10
a
b
(POWER-ON/STANDBY-ON)
Press toTurn the unit On and go into Standby mode.
To completelyTurn Off the unit, you must unplug the AC power
cord.
FAV
Displays a list of all channels marked as favorite.
(Includes subchannels)
SLEEP
Press to activate the sleep timer.
COLOR buttons (green/yellow)
Functionally useful for Net service.
VUDU and COLOR button (blue)
Starts upVUDU and functionally useful for Net service.
SOURCE
Toggles to select connected devices.
NET TV
Displays the NetTV menu.
OK
Press to decide the command of setting when the Home menu is
displayed.
▲▼◄► (NAVIGATION buttons)
Press to move left/right/up/down through the items.
INFO
Displays information about theTV channel or accessory device.
EasyLink buttons
Functionally useful for EasyLink, Net service and DLNA.
Remote control function
a
t
s
b
c
d
c
d
e
f
g
h
r
e
f
q
g
h
i
p
o
j
k
i
j
k
n
m
l
Press to search backward or forward through the disc.
Press to start, pause or resume playback.
Press to stop the disc playback.
E /D
Æ∆
C
Press to start or stop video recording.
I
l
0−9 (NUMBER buttons)
Press to select channels.
• (DOT)
Press to shift the subchannel from the main
channel.
PREV.CH
CH+/−
Press to return to the previously viewed channel.
Press to select channels.
m
n
o
p
q
r
s
t
FORMAT
Selects a picture format.
VOL +/−
Press to adjust the volume.
MUTE
Press toTurn the sound On and Off.
BACK
Press to return to the previous menu operation.
MENU/E�IT
Press to display the Home menu.
NETFLI� and COLOR button (red)
Starts up NETFLIX and functionally useful for Net service.
AUTO MODE
Cycles through preset picture and sound settings.
OPTIONS
Displays a list of menu items applicable to the highlighted object
or screen.
English
11
a
VOL ◄/►
Control panel
Touch to adjust volume down (◄)/up (►) or to move left
(◄)/right (►) when selecting menu items.
b
c
d
MENU
Touch to display the Home menu.
SOURCE
Touch to select the connected devices.
CH ▲/▼
Touch to select channels or to move up (▲)/ down (▼) when
selecting menu items
e
(POWER-ON/STANDBY-ON)
Touch toTurn the unit On and go into Standby mode.
To completelyTurn Off the unit, you must unplug the AC power
cord.
a
b
c
d
e
f
g
Power On indicator
Lights up white when the unit isTurned On and flashes while the
unit isTurning On.
Infrared sensor
Receives IR signals from remote control.
g
f
h
i
Ethernet port
Terminals
For Internet connection using an Ethernet cable with an RJ-45
connector.
Digital Audio Output jack
Digital Audio (S/PDIF) Output to home theaters and other Digital
Audio systems.
j
k
PC Input jack
VGA cable connection for PC.
Component(Y/Pb/Pr)/CompositeVideo(VIDEO) Input jacks
forVIDEO
CompositeVideo Input (VIDEO) jack is shared jack with
n
o
ComponentVideo Input (Y) jack.
l
m
Analog Audio (L/R) Input jacks
Connects Analog Audio signals from;
– HDMI-DVI / Analog Audio (L/R) jacks signal.
– ComponentVideo / Analog Audio (L/R) jacks signal.
– CompositeVideo / Analog Audio (L/R) jacks signal.
– PC Connection / Analog Audio (L/R) jacks signal with Stereo
mini 3.5mm plug Audio cable on PC.
h
i
j
k
l
m
HDMI Input jacks
Digital Audio and video Input from high definition Digital devices
such as Blu-ray disc players, cable boxes and satellite set-top
boxes.
p
q
For HDMI 1 only
In addition to normal HDMI and HDMI-DVI functionality, it
outputsTV Audio to an HDMI-ARC-compliant device, such as a
home theater system.
n
o
USB wireless network terminal
Connects the supplied USB wireless LAN adapter.
USB terminal
Data Input from USB Memory Stick only.
Do not connect any device to this terminal such as; Digital
camera, keyboard, mouse, etc.
p
q
75 ohm Cable/Antenna connection
Signal Input from an antenna, cable or satellite.
Headphone Audio Output jack
Headphone 3.5mm stereo jack for personal listening.
English
12
Connecting a set-top box, Blu-ray/DVD recorder via
composite connectors and Analog Audio
Connecting the antenna or the cable
Be sure your antenna or other device is connected properly before
plugging in the AC power cord.
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals.
If you connect to an antenna through RF cable
Any DTV programs that are broadcasted in your area can be received
for free through an antenna connection.
cable
OUT
set-top box
RF cable
IN
cable
RF cable
OUT
OUT
IINN
Audio (L/R) +
Video cables
IN
antenna
OUT
OUT
IN
RF cable
Audio (L/R) +Video cables
IN
Blu-ray disc/DVD recorder
If you connect a set-top box through RF cable
If theTV is connected to a cable box or satellite set-top box via a
coaxial connection, set theTV to channel 3, 4 or the channel specified
by the service provider.
Note
•
•
information.
Depending on your antenna system, you may need different types of combiners
(mixers) or separators (splitters) for HDTV signal.The minimum RF bandpass on these
devices is 2,000MHz or 2GHz.
•
•
•
For your safety and to avoid damage to this unit, please unplug the RF coaxial cable
from the antenna Input jack before moving the unit.
If you did use an antenna to receive AnalogTV, it should also work for DTV reception.
Outdoor or attic antennas will be more effective than a set-top box or inside antenna.
ToTurn On your reception source easily between antenna and cable, install an antenna
selector.
RF cable
IN
antenna
OUT
•
•
If you are not receiving a signal from your cable service, contact the Cable provider.
Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
set-top box
RF cable
IN
Plugging in the AC power cord
Make sure that the AC power cord must be plugged to an AC outlet
after all the necessary connections are made.
If you connect a set-top box through HDMI
If theTV is connected to a cable box or satellite set-top box via HDMI,
make sure you select the correct Source by using SOURCE.
Caution
•
•
Do not connect the AC power cord to a power supply outside the indicated voltage of
this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this range may result in
fire or electrical shocks.
RF cable
IN
IN
OUT
Note
HDMI cable
•
Each time you plug in the AC power cord, no operations will be performed for a few
seconds.This is not a malfunction.
set-top box
If you connect a set-top box through ComponentVideo Input
If theTV is connected to a cable box or satellite set-top box via
ComponentVideo Input, make sure you select the correct Component
Video Source by using SOURCE.
RF cable
OUT
Audio (L/R) cables
IN
IN
OUT
set-top box
IN
Component (Y/Pb/Pr)Video cables
English
13
System searching. Please wait...
These operations are accessible by remote control.
Some may also be accessible by control panel on the main unit.
Digital channels found:
Analog channels found:
0
0
Initial setup
Auto programming may take more than 20 minutes to
complete. Digital channels will take longer than Analog
to find and program. Please wait until you see
the Auto Programming complete message.
This section will guide you through the unit’s initial setting which
includes selecting a language for your on-screen menu, country, location
and AutoProgram, which automatically scans and memorizes viewable
channels.You can also set the network connection in this setting.
Stop
Before you begin:
Make sure the unit is connected to antenna or cable.
5 After the channel installation is completed, Network setup screen
1 After making all the necessary connections, press toTurn On the
will appear. Use ▲▼ to select Wireless or Wired, then press OK.
unit.
• It may take a few moments toTurn On the unit for the first time.
• Initial setup menu appears automatically after the unit isTurned
On.
This TV can be connected to
your home network.
Select your connection type.
Wireless
Wired
2 Use ▲▼ to select the on-screen language, country, location on the
right side of theTV screen, then press OK.
• You must set Home in location setting. Otherwise, Picture and
Sound settings you adjusted will not be memorized after the unit
goes into Standby mode.
3 Use ▲▼ to select the signal type.
• If theTV is connect to a cable box or satellite set-top box, select
the 2nd one and skip to step 5.
Skip
To set up a TV signal from a cable TV
wall jack or a standard TV antenna.
Select
If you have a router with WPS function, select
Wireless
Wired
Wireless to connect to the Internet.
If you connect with an Ethernet cable, select
Wired to connect to the Internet.
• If you select Wireless, use ▲▼ to select Easy Connect and
press OK.
To set up a TV signal from a cable TV
box or satellite TV receiver.
Select
6 Follow the on-screen instructions to complete the installation.
• When you select On in the selection screen of
Auto software update.A message will appear if there is the
latest software on the network server.
4 Use ▲▼ to select Antenna forTV channels or Cable for CATV
7 Use ◄► to select Start, then press OK to begin Settings assistant.
channels, then press OK.
Settings assistant will allow you to customize your picture settings to your
personal preference.You will see a series of test pictures where
the right side and left side differ. Select the side that is most pleasing to
you with the Left/ Right buttons.
Make sure that you have
Antenna
Cable
Skip
attached your antenna or cable
signal into the jack on the back
of your TV labeled “ANTENNA. IN”.
Cancel
Start
Now select either Antenna or
Cable, using up/down key of the
remote control. Once you have
made you selection, press the
OK button to proceed.
8 Press ◄ or ► 5 times to select the side of the pictures that is the
most pleasing to you, then press OK.
– When Antenna is selected, theTV detects antenna signals. It searches
for DTV and AnalogTV channels available in your area.
– When Cable is selected, theTV detects signals supplied by cable. It
searches for DTV, AnalogTV and Cable channels available in your
area.
Which side of the picture do you prefer?
• Autoprogram will begin.
Cancel
Picture A
Picture B
Continued on next page.
English
14
9 Press OK to finish Settings assistant.
Store your preferences.
Cancel
Store
• Network updates will appear after Connection test succeeds.
Use ◄► to select Yes, then press OK.
• When the initial setup is completed, the lowest memorized
channel with the confirmation message of the location setting
will be displayed on theTV screen.
Note
•
•
•
If you are not receiving a signal from your cable service, contact the Cable provider.
If you press during AutoProgram, this setup ofTV channels will be canceled.
The initial AutoProgram function can be executed for either Antenna or Cable only
once.When you change the connection (Antenna/Cable), set Autoprogram again.
➠
After an initial setup is completed...
• If you want to scan the channels automatically again.
Autoprogram
• You can add the desired cable and Analog channels
unmemorized by AutoProgram.
➠
Weak channel installation
• If you want to change to another language.
Language
• If you want to change the country setting.
Country
• If you want to change the location setting.
Location
• If you want to change the network setting.
Network
➠
➠
➠
➠
➠
➠
• If you want to restore the picture setting.
Settings assistant
English
15
4 Use yourTV
Switching channels
Switching on yourTV and putting it in
Standby mode
To Turn Power On or to Turn Standby On
.
•
Touch or press
on the front panel or the remote control.
Note
•
Energy consumption contributes to air and water pollution.When the AC power
cord is plugged in, yourTV consumes energy.YourTV has very low Standby power
consumption.
To select Channels by using CH ▲/▼ or CH+/−
•
Touch CH ▲(up)/▼(down) on the front panel or press CH+/−
on the remote control.
Adjusting volume
To select Channels by using the NUMBER buttons
DigitalꢀTVꢀoperation
•
For Digital channels, press a number followed by a dot “•” and the
corresponding sub channel number.
– When selecting Digital channel 11.1
Be sure to press • before entering the subchannel number.
Analog/CableꢀTVꢀoperation
– When selecting cable or Analog channel 11
Press PREV.CH to return to the previously viewed channel.
To increase or decrease volume
Note
•
Touch VOL ◄(down)/►(up) on the front panel or press
VOL +/− on the remote control.
To mute or unmute sound
•
•
To select the non-memorized channels, use the NUMBER buttons.
Channel not available or No Signal will appear on theTV screen after the subchannel
broadcast is over.
•
•
Press MUTE on the remote control to mute the sound.
Press MUTE again or VOL +/− to recover the original sound.
•
Audio only message will appear on theTV screen, when you receive only sound signal.
English
16
Note
Watching channels from an external device
Switching Each Input Mode can easily switch with the remote control
betweenTV (DTV or AnalogTV) and external devices when they are
connected to the unit.
•
After selecting Add new devices, follow the on-screen instructions to select the correct
device and connector.
Lock or unlock your device from the Home menu
1 Turn On a set-top box or the connected device.
This section describes how to lock or unlock specified device.
• The picture from your set-top box or the connected device
might appear automatically on theTV screen.
1 Press MENU/E�IT on the remote control.
2 Use ▲▼◄► to select a device to lock or unlock.
3 Press OPTIONS on the remote control.
If the picture does not appear
4 Use ▲▼ to select Device lock or Device unlock, then press OK.
• If device lock is unlocked, Device lock will be displayed. If device
lock is locked, Device unlock will be displayed and will be
displayed at the top right of the device icons.
➠
Press SOURCE repeatedly to select the set-top box or the
• Once you have set PIN, PIN input menu does not appear after
the unit isTurned on.
connected device and wait a few seconds till the picture appears.
e.g.)
TV
11.1
DTV/TV channel
HDMI 1
HDMI 2
HDMI 3
HDMI 1
HDMI 2
HDMI 3
Video
Enable or disable RC key forwarding from the Home
menu
Video
or
Component
This section describes how to enable or disable RC key forwarding for
a particular device.
PC
PC
1 Press MENU/E�IT on the remote control.
• Pressing ▲ reverses the direction of the Input modes.
2 Use ▲▼◄► to select a device to enable or disable RC key
2 Use the remote control of the set-top box or the connected device
forwarding.
to select channels.
3 Press OPTIONS on the remote control.
4 Use ▲▼ to select Enable RC key forwarding or
Access the Home menu
Disable RC key forwarding, then press OK.
• If RC key forwarding is set to off, Enable RC key forwarding
will be displayed. If RC key forwarding is set to on,
Disable RC key forwarding will be displayed and will be
displayed at the top left of the device icons.
1 Press MENU/E�IT.
Note
•
This function is available only when your devices are connected to this unit
through HDMI cables and assigned to an HDMI port (HDMI 1 to HDMI 3) with
Add new devices in the Home menu.
Guide to Home menu
d
a
e
Watch TV
Net TV
Browse USB
Browse PC
Setup
b
c
f
Add new devices
Switches back to the antenna source if
another source is selected.
a WatchTV
:
Accesses NetTV menus.
b NetTV
:
:
:
:
:
Adds new devices to the Home menu.
Accesses USB menus.
c Add new devices
d Browse USB
e Browse PC
f Setup
Accesses DLNA menus.
Accesses menus that allow you to
change picture, sound and otherTV
settings.
English
17
PhilipsWireless MediaConnect
View photos, play music and watch videos
using DLNA
(Available for 32PFL4907 & 26PFL4907only)
You can enjoy yourTV as a PC monitor wirelessly using your home
network. Make sure you download the Philips Wireless MediaConnect
software and install it on your PC before you perform the steps below.
On yourTV you can play video, music and photo files stored on DLNA
certified home media servers connected to your home network. In
order to use this feature, you must connect this unit to the Internet.
It is recommended that files to be played back in this unit are recorded
under the following specifications:
Install PhilipsWireless MediaConnect
<MP3>
1 Display Setup using Home menu and use ▲▼ to select Software,
•
•
Sampling frequency
Constant bit rate
: 32kHz or 44.1kHz or 48kHz
: 32kbps - 320kbps
then press OK.
2 Use ▲▼ to select MediaConnect code, then press OK.
<JPEG>
• Write down the 12-digit code displayed on the screen.You will
need this to download MediaConnect software.
•
Upper limit
: 16Mpixel
<MPEG>
3 Start your Internet browser on your PC and open
the Philips Wireless MediaConnect download page at
•
•
•
Playable codec
Maximum size of a video : 1920x1080
Audio type
: MPEG1, MPEG2
:AC3, MPEG1 audio layer 3 (MP3),
MPEG1 audio layer 2, LPCM
On the website, you can check the necessary PC system
requirements.
Note
4 Enter the 12 digit code you wrote at step 2.
•
A maximum of 1,023 folders or files can be recognized.
For the home server list, maximum of 16 servers can be displayed.
The 10th and deeper hierarchies cannot be displayed.
Unplayable files in the home server will not be displayed in the file list.
For some files, playback is not available even if displayed in the file list.
In order to play back the contents in home servers, the player and the servers must be
connected to the same access point.
5 Click the “Download now” button to download the free
•
•
•
•
•
Philips Wireless MediaConnect software.
6 Once downloaded, start the file “Philips Wireless MediaConnect_
setup.exe”. Follow the instructions on the screen to complete
software installation.
•
•
•
Compatibility and available playback function may differ depending on the home server.
Video files with unsupported audio format will be skipped.
The quality of the playback picture or audio differs depending on your network condition.
Using PhilipsWireless MediaConnect
1 Launch Philips Wireless MediaConnect on your PC first.
Before using DLNA
• Select “Start projecting” with right click on the
system tray.
in the
Follow the procedure below before using DLNA.
1 Connect this unit to the Internet.
• The start up screen for Philips Wireless MediaConnect will
be displayed and the unit searches for an available PC that is
running Philips Wireless MediaConnect software.
➠
➠
Once connected, the Philips Wireless MediaConnect software will
encode and stream the screen of your PC as a video along with audio.
• Broadband Internet connection of 8Mbps or faster is required.
Depending on your computer and network configuration, there will be
a delay between your PC screen and theTV but the audio-video will
always be in sync.
➠
Using DLNA
PhilipsꢀWirelessꢀMediaConnectꢀHelp
To read the Philips Wireless MediaConnect Help, right click the program
icon in the notification tray of the PC and select Help.
1 Start DLNA home media servers in your home network.
• For details, refer to the instruction book of the DLNA certified
device.
Specifics
2 Press MENU/E�IT on the remote control.
You can project high definition (HD) or standard definition (SD) video,
depending on the processing power of your PC. For smooth playback
of HD video, please use a hardware accelerated video player on your
computer.A hardware accelerated video player uses the graphics
adapter of your PC to render HD video rather than the processor.
This frees up the processor for Philips Wireless MediaConnect video
encoding.The content protection on most Blu-ray or DVD disc
movies might restrict watching the movie onTV when the disc is
playing on a PC.TheTV shows PC media files with a small delay.
Philips Wireless MediaConnect is only available for PC.
3 Use ▲▼◄► to select Browse PC.
• This unit will start loading the home server list.
4 After loading, home server list will appear. Select a home server you
want to access, then press OK.
PCꢀrequirements
Windows XP,WindowsVista,Windows 7,
Mac OS X 10.5 or above (PC only)
Minimum PC requirements
•
•
•
Intel® Core™ 2 Duo 1.8GHz
512MB RAM
IEEE 802.11n
Recommended PC requirements
•
•
Intel® Core™ 2 Duo 2.1GHz
1GB RAM
English
18
Guide to DLNA
Listen to music using DLNA
b
c
1 Press ▲▼ to select a file or a folder.
Æ∆
2 Press OK or
to play the selected files.
Server1
Audio
Photos
Video
Folder
Æ∆
Æ∆
again to resume.
• Press OK or
to pause, press OK or
a
Server2
Server3
d
e
• Press D to skip up the next file.
• Press E to skip down the previous file.
• Press C to stop playback.
• Press OPTIONS to display the optional menu, then use ▲▼ to
select the desired item.
Highway Blues
Video10
Title:
Artist:
Album:
Duration: 00:05:28
Year:
Blue hills
Off
On
Off
On
Sets repeat playback to off.
Repeat
Shuffle
Sets repeat playback for all MP3 files in the
current folder.
Sets shuffle playback to off.
a Home server list
Sets shuffle playback for all MP3 files in the
current folder.
b Folder/media icon
c Group (folder)/file list
d Image
The sound will not be output from the unit's
speakers.
The sound will be output from the unit's
speakers.
You can control audio output from your
connected EasyLink Compliant Devices with
VOL +/− by using this unit's remote control.
Off
On
TV speakers
Note
e Current file info
Speakers
EasyLink
View your pictures using DLNA
1 Press ▲▼ to select a file or a folder.
•
Master EasyLink must be activated in the Preferences menu to make the
TV speakers menu available when you select On or Speakers EasyLink.
Æ∆
2 Press OK or
to start a Slide show of the files.
Æ∆
• Press OK or
to pause the Slide show.
The F icon appears.
• Press E or D to move between images.
Watch videos using DLNA
• Press BACK or C to stop the Slide show.
• Press OPTIONS to display the optional menu, then use ▲▼ to
select the desired item.
1 Press ▲▼ to select a file or a folder.
Æ∆
2 Press OK or
to play the selected files.
Æ∆
Æ∆
again to resume.
• Press OK or
to pause, press OK or
Short
Medium
Long
Switches to the next image in 5 seconds.
Switches to the next image in 10 seconds.
Switches to the next image in 15 seconds.
No effect when switching images.
• Press D to fast-forward search.
• Press E to fast-backward search.
• Press C to stop playback.
Slide time *1
Æ∆
Press
to resume from the point at which playback was
stopped. Press OK to play from the beginning of the file at
which playback was stopped.
• Press CH+ to play the next file.
• Press CH− to play the current file at the beginning.
Press CH− twice within 5 seconds to play the previous file.
• Press OPTIONS to display the optional menu, then use ▲▼ to
None
Dissolve
Wipe right
Wipe left
Wipe up
Wipe down
Box in
Box out
0
Overlaps a next image on a current image.
Pushes a current image out from left.
Pushes a current image out from right.
Pushes a current image out from bottom.
Pushes a current image out from top.
A next image comes into the center from out.
A next image goes to the out from center.
Displays an image at its original direction.
Rotates an image clockwise by 90 degrees.
Rotates an image clockwise 180 degrees.
Rotates an image clockwise 270 degrees.
Displays an image at its original size.
Transitions *1
select the desired item.
The sound will not be output from the unit's
speakers.
Off
The sound will be output from the unit's
speakers.
On
TV speakers
You can control audio output from your
connected EasyLink Compliant Devices with
VOL +/− by using this unit's remote control.
Speakers
EasyLink
90
Note
Rotate *2
180
•
•
The resume information will be kept even when the unit isTurned Off.
If you play another file while the previously viewed file is being resumed, the resume
information of the previously viewed file will be deleted.
270
1x
Zoom *2
2x
Magnifies a current image as twice.
4x
Magnifies a current image as fourfold.
*1 You can set Slide time and Transitions when images are in Slide show.
*2 You can set Rotate and Zoom when Slide show is in pause mode.
English
19
My Apps functions
NetTV
NetTV offers Internet services for yourTV. Use the remote control to
browse the NetTV pages.You can play movies and much more, all from
yourTV screen.
Remove App
1 Use ▲▼◄► to select the desired App, then press OPTIONS.
– Because NetTV is an online system, it can be modified over time to
better serve its purpose.
– Some NetTV services can be added, changed or stopped after
some time.
2 Use ▲▼ to select Remove App, then press OK.
• The selected App will be removed from My Apps list.
– You cannot download and save files or install plug-ins.
Move App
1 Use ▲▼◄► to select the desired App, then press OPTIONS.
Before Logging in to NetTV
2 Use ▲▼ to select Move App, then press OK.
Follow the procedure below before logging in to NetTV.
• The selected App icon will be smaller.
3 Use ▲▼◄► to the point you want to place, then press OK.
1 Connect this unit to the Internet.
➠
Guide to App Gallery
Logging in to NetTV
All
App Gallery
a
b
1 Press NETTV.
vTuner Video
Tag Games
Cloud TV
Twitter
Video
Cloud TV™ POWERD
• NetTV screen will appear, then use ▲▼◄► to select service
icon.
GAMES
• For the first time only, Philips Terms of Use Internet
Enabled product screen will appear.After confirming the
content, use ◄► to select Agree, then press OK.
Cloud TV™ POWERD
c
facebook (CloudTV)
Cloud TV™ POWERD
Guide to NetTV screen
List of category menu.
a Category menu:
:
:
Displays unregistered Net service icons
b Icon list
on My Apps list.
a
Video
HD MOVIES
Cloud TV™ POWERD
Displays the order of pages.The current
page will be highlighted.
c Page guide
:
GAMES
e
f
g
App Gallery
Cloud TV™ POWERD
Cloud TV™ POWERD
My Apps
APP1
APP2
1 Press NETTV, then use ▲▼◄► to select App Gallery.
2 Use ▲▼◄► to select the desired App in My Apps list, then press
Radio
Apps
b
OK.
movies
sports
technology
c
d
• You can also choose from Category menu. Use ▲▼◄► to
select All, then use ▲▼ OK to select the desired category.
• If you select Add, the selected App icon will be placed at the
Terms of use
Country
: USA
end of My Apps list.
Displays default service icons.
a Net service icons (fixed):
• If you select Add and move, the selected App icon will be
smaller and use ▲▼◄► to the point you want to place, then
press OK.
Even if you press BACK to cancel this function, the selected App
icon will be placed at the end of My Apps list.
Displays Net service icons you have listed
in App Gallery.
b
My Apps list
:
Selects what country you live.
Displays a clause of Net service.
c
d
e
Country
:
:
:
Terms of use
App Gallery
Displays currently available Net service
icons in your country.
Information on Network Services
Displays the order of pages.The current
page will be highlighted.
f Page guide
APP1/APP2
:
:
For detailed information on 3rd party Internet services, please visit the
service providers website:
Displays Net service icons you
have registered in App Gallery for
APP1/APP2.
g
Netflix
Film Fresh
VUDU
•
Press COLOR buttons (green/yellow)
to start up APP1/APP2 accordingly.
CloudTV
English
20
4 In the playback screen, use ▲▼ to select the desired episode, then
Enjoying vTuner
press OK.
• After loading, playback of the selected episode will start.
• To stop playback, press C.
• Episode list can be displayed 5 episodes at one time.To show
With this unit, you can enjoy video and Internet radio with vTuner via
the Internet. In order to watching video and listen to Internet radio, you
must connect this unit to the Internet.
the previous/next episodes, press COLOR buttons(red/green).
• To enlarge playback screen, press COLOR button(blue).
Video playback
Note
After you set up the network connection, follow the procedure below
to watch the video.
•
•
Video service may not be fully available with narrowband Internet connection. (e.g.
56k modem) When watching video, use broadband Internet connection. (For details,
contact your Internet service provider.)
Depending on the bit rate of a station or the network environment, it may take a while
to complete loading the station or playback may not be available.
The streaming video may be interrupted during playback, when the vTuner server is busy.
Some stations cannot be displayed in the list, depending on the network environment.
If the loading time of a station exceeds 3 minutes, the loading will be canceled.
The order of station/episode in the list depends on the information from vTuner
server and may change without notice.
Guide to the player screen
e.g.) Recommendations
•
•
•
•
a
Recommendations Favo Genr Most
b
Add to Favorites
NewsNews
You can add your favorite stations to Favorites in the category tab.To
add your favorite stations, follow the procedure below.
1 Follow steps 1 to 2 in Video playback.
➠
2 Use ▲▼◄► to select the station you want to add to Favorites,
then press COLOR button(yellow).
2/3
Previous
Next
Favorite
c
• The selected station is added to the station list in Favorites.
• Confirmation message will appear.
List of category menus
a Category
:
• Press COLOR button(yellow) to add your favorite station in
Favorites while the desired episode is selected in the episode list
or the episode is being played back.
Recommendations
: List of recommendation stations
: List of your favorite video stations
: List of stations categorized by genre
Favorites
Genre
3 Press OK.
Most Popular Podcasts : List of popular podcasts
Displays station list.
b Station list
:
:
Remove from Favorites
Displays COLOR buttons
(red/green/yellow/blue) guide.
c Operation guide
➠
2 Use ◄► to select Favorites in the category tab, then press OK.
1 Press NETTV on the remote control and then use ▲▼◄► to
3 Use ▲▼◄► to select the station you want to remove from
select vTunerVideo.
Favorites, then press COLOR button(yellow).
2 Use ◄► to select the desired category, then press OK.
3 In the player screen, use ▲▼◄► to select the desired station or
• Confirmation message will appear.
4 Use ◄► to select Yes, then press OK.
• The selected station is removed from Favorites.
genre, then press OK.
Guide to the playback screen
a
Reco Favo Genre
Most
NEWS NEWS (Video)
The latest news
b
c
NEWS NEWS (11.25.10)
Date
: Nov /25/ 2010
NEWS NEWS (11.24.10)
NEWS NEWS (11.23.10)
NEWS NEWS (11.22.10)
Duration : 00:19:24
f
d
e
NEWS NEWS (11.21.10)
Previous
Next
Favorite
a Station icon
b Station name
c Station information
d Episode list
e
COLOR buttons (red/green/yellow/blue) guide
f Current episode information
English
21
Note
Internet radio playback
•
•
This unit cannot play back stations with audio format other than MP3 and WMA.
After you set up the network connection, follow the procedure below
to listen to Internet radio.
Internet radio service may not be fully available with narrowband Internet connection.
(e.g. 56k modem) When listening to Internet radio, use broadband Internet connection.
(For details, contact your Internet service provider.)
Guide to the playback screen
e.g.) Location
•
Depending on the bit rate of a station or the network environment, it may take a while
to complete loading the station or playback may not be available.
The streaming audio may be interrupted during playback, when the vTuner server is busy.
Some stations cannot be displayed in the list, depending on the network environment.
If the loading time of a station exceeds 3 minutes, the loading will be canceled.
•
•
•
•
a
The order of station/folder in the list depends on the information from vTuner server
and may change without notice.
Jazz(3)
FM 76.2 FM
Genre
: Jazz
Add to favorite list
Jazz jAzz jaZz jazZ
f
e
Schonan Beach FM 78.9
b
c
You can add your favorite stations to Favorites in the category list.To
add your favorite stations, follow the procedure below.
d
Location : Japan
➠
Language : Japanese
2 Use ▲▼ to select the station you want to add to Favorites, then
Favorite
press COLOR button(yellow).
• The selected station is added to Favorites folder.
a Current hierarchy (total number of items)
• Confirmation message will appear.
• If you select a folder, use ▲▼ to select the desired station in the
next hierarchy, then press COLOR button(yellow).
b Current station information
(Information will be changed when INFO is pressed)
c
COLOR buttons (red/green/yellow/blue) guide
3 Press OK.
d Station list
Note
e Playback status
f Station icon
•
You can also add your favorite stations to Favorites on your PC.To add your favorite
with the access code, which you can check from the category list. Internet radio
1 Press NETTV on the remote control and then use ▲▼◄► to
playback
➠
select vTuner Radio.
•
•
You can change folder names or order of lists in your vTuner page on the Internet.
My_Favorite folder will appear after you add a station to Favorites on this unit. (Your
favorite station will also be added to My_Favorite folder.)
• Category list will appear.
2 In the category list, use ▲▼ to select the desired category, then
press OK.
Remove from favorite list
• Station/folder list of selected category will appear.
• For Location and Genre, use ▲▼ to select the desired location
or genre after selecting the category, then press OK.
➠
2 Use ▲▼ to select Favorites, then press OK.
List of stations which are recently played
List of your favorite radio stations
Recently Played
Favorites
3 Use ▲▼ to select the station you want to remove from Favorites,
then press COLOR button(yellow).
List of stations which are added on vTuner
website (This category will appear only
after you add stations on vTuner website. )
• Confirmation message will appear.
My Added Stations
4 Use ◄► to select Yes, then press OK.
• The selected station is removed from Favorites folder.
List of stations categorized by location
List of stations categorized by genre
Location
Genre
List of the latest stations which are recently
added automatically.
Add stations on the vTuner website
New Stations
You can add stations which are not in the vTuner station list.
List of the most frequently accessed
stations by the all listeners.
Most Popular Stations
➠
3 In the station/folder list, use ▲▼ to select the desired station, then
2 Use ▲▼ to select Get access code, then press OK.
press OK.
• The latest vTuner website address and access code for this unit
will be displayed. Please take a note of the access code. (This
access code will be required when creating a vTuner account.)
• After loading, playback of the selected station will start.
• If you select a folder, use ▲▼ to select the desired station in the
next hierarchy, then press OK.
• To stop playback, press C.
• To go back to the previous or next hierarchy, press ◄►.
3 On your PC, visit the website and create your vTuner account.
• Follow the instructions given on the PC screen.
4 Add stations by following the instructions given on the PC screen.
• The stations will be added to My Added Stations.
English
22
Reset the station list
Creating a New Station
You can remove all stations/folders in Recently Played, Favorites and
By entering your favorite artists or tracks, Pandora selects music and
My Added Stations.
creates a new station for you on the basis of the entered information.
1 On the player screen, press COLOR button(yellow) to call up the
➠
Tool Menu.
2 Use ▲▼ to select Reset, then press OK.
2 Use ▲▼ to select Create a new station, then press OK.
3 Use ◄► to select Yes, then press OK.
3 Enter a name of your favorite artist or tracks, then press OK while
• All stations/folders in Recently Played, Favorites and
OK is selected.
My Added Stations are removed.
• Search result will appear on the right side of theTV screen.
• If the selection screen of result type appears, use ▲▼ to select
the desired type, then press OK.
Pandora® operations
4 Use ▲▼ to select the desired station, then press OK to start the
With this unit, you can instantly listen to personalized radio stations
streamed over the Internet from Pandora.
playback.
Resumes the playback/pause the playback.
Stops the playback and the station list will appear.
Skips to the next track.
Æ∆
C
Activating Pandora
∫
In order to listen to Internet radio streamed from Pandora via the
Internet, you must create a Pandora account and activate this unit.
Note
1 Press NETTV, then use ▲▼◄► to select PANDORA.
2 Use ▲▼ to select Create new account, then press OK.
3 Use ▲▼ to select No, I am new to Pandora., then press OK.
•
On the Tool Menu, you can delete or rename the currently selected station.
Guide to the Player Screen
4 Note the activation code and website address displayed on theTV
On the player screen, you can set various options to the currently
playing track.
screen.
5 On your PC, visit the website address noted at step 4.
6 Follow directions on the website to create your account.
7 On this unit, select Continue and press OK to complete activation.
a
b
c d e f
American Oldies Radio
ABC
: XXXXX
: XXXXX
By
On
Adding Pandora User Accounts
4:52
0:00
You can add multiple Pandora user accounts on this unit.
➠
2 Use ▲▼ to select Yes, I have a Pandora account, then press OK.
3 Enter your e-mail address, then press OK while OK is selected.
4 Enter a password, then press OK while OK is selected.
5 Use ▲▼ to select Sign In, then press OK.
Exit
Why this track?
Tool Menu
Station List
g
: Displays artist name.
: Displays album name.
a Artist name
b Album name
c
• Your account is added to the user list and player screen appears
on theTV screen.
:
Give thumbs up to the currently playing track.
Pandora will play tracks similar to the track.
Note
:
Give thumbs down to the currently playing
track. Pandora will skip and will not play the
track.
d
e
•
•
Pandora is available only in the United States.
You can add up to 5 accounts.After creating 5 accounts, Create new account will not
be displayed.
:
Bookmarks the currently playing track.
You can view your bookmarked tracks list by
accessing Pandora website and log into your
account.
:
:
Tells Pandora that you do not like the currently
playing track. Pandora will not play the track for
about a month.
f
Displays COLOR buttons
(red/green/yellow/blue) guide.
g Operation guide
English
23
Guide toTwitter Home screen
UsingTwitter
You can view yourTwitter feeds and more using theTwitter application
on this unit.
Twitter Home Screen consolidates browsing of tweets and some
functional menus forTwitter.
To call up the screen, press NET TV on the remote control and then
use ▲▼◄► to select Twitter.
SingleꢀView
Logging in toTwitter
After you set up the network connection, you must log in with your
Twitter account.
Home
Make sure the unit is not in network service or Browse USB mode.
b
Favorite
a
1 Press NETTV on the remote control and then use ▲▼◄► to
Mentions
select Twitter.
• Login screen will appear.
List
2 Use ▲▼ to select Username, then press OK.
• Software keyboard will appear.
less than
1
minute
Phily and Maggy
c
d
Right as rain.That was a sense of humor...
Trends
Select each one of characters from the list.
Delete the last character in the entry field.
Delete all characters in the entry field.
Switch case and symbols.
Characters
Clear
List of functional menus.
a Menu
:
:
:
:
All clear
a/A/@
Cancel
OK
Displays currently watching channel.
Displays currently tweeting onTwitter.
b Viewing channel
c Timeline
Cancel the input.
Displays COLOR buttons
d Operation guide
(red/green/yellow/blue) guide.
Determine the input Username and/or Password.
FullꢀView
3 Use ▲▼◄► to input your Username and Password into the
entry fields. Select OK after you have filled in all the necessary
items in the entry field, then press OK.
Single view switches to Full view when you select timeline then press
OK.
less than
1
minute
Phily and Maggy
Right as rain.That was a sense of humor...
• Password can be skipped next time onwards once you have
selected Remember me when registering the user name.
• Software keyboard will disappear.
Home
less than
less than
1
1
minute
minute
Perseverance prevails.
I'll be there, textbook in hand!
Favorite
4 Use ▲▼◄► to select Start, then press OK.
Tinner Loberto
Greetings,I am looking for a small tiny stove in which to heat once a day.
• The unit will now establish a connection with theTwitter server
and perform authentication.
Mentions
less than
1
minute
Propatanga
Would you like the straightforward reasons that people believe in it?
List
5 When the unit is logged in successfully,Twitter Home screen will
appear at the left and the timeline will appear at the bottom of the
TV screen.
less than
1
minute
Peter’s rock star
It’s not so rich a country as your country.
Trends
Note
Viewing tweets on theTV
•
•
User name and password are case-sensitive.
User name will not accept your e-mail account. Use only your user name registered on
theTwitter server.
If you select Start with no user name, the unit logs in as 'Public'. In this case you can
display 'Public timeline' and 'Trends' only.
After logging in toTwitter, yourTV will download the latest 20 tweets
to display.
•
•
1 Press NETTV on the remote control and then use ▲▼◄► to
selectTwitter.
2 Use ▲▼◄► to select the desired user name, then press OK.
• If you have not stored the password,
user name.
will appear beside the
3 When the unit is logged in successfully,Twitter Home menu will
appear at the left and the timeline will appear at the bottom of the
TV screen.
Note
•
4 user names (accounts) can be stored in this unit.
Continued on next page.
English
24
Viewing Favorites onTwitter
ViewingTrends onTwitter
YourTV displays the logged in user's favorites onTwitter.
Trends show topics trending in your area.
➠
➠
Îï
to select Trends, then press OK.
2 Use ▲▼ to select Favorite, then press OK.
2 Use
• If you have no favorites, TV was not able to acquire the Tweet.
• Press COLOR button(green) to switch between the Area and
will appear.
Trends.
• If you display Area, the topside will be displayed some countries,
and the downside will be displayed some cities.
Displaying Mentions onTwitter
YourTV displays replies for the logged in user.
➠
2 Use ▲▼ to select Mentions, then press OK.
• If you have no replies, TV was not able to acquire the Tweet.
will appear.
Viewing Lists onTwitter
The list shows timeline categories such as friends, family, colleagues, or
sports teams created by yourself on your account.
➠
2 Use ▲▼ to select List, then press OK.
• If you have no lists, Cannot get the list information. will appear.
3 When you press COLOR button(yellow) in 1 or 5 list view, the
timeline will be separated at top and bottom.The upside displays 3
timelines and the downside display 2 timelines.
2ꢀListꢀView
less than
1
minute
Phily and Maggy
Right as rain.That was a sense of humor...
less than
less than
1
1
minute
minute
Perseverance prevails.
I'll be there, textbook in hand!
Tinner Loberto
Greetings,I am looking for a small tiny stove in which to heat once a day.
less than
1
minute
Propatanga
Would you like the straightforward reasons that people believe in it?
less than
1
minute
Peter’s rock star
It’s not so rich a country as your country.
4 When you press COLOR button(blue) in 1 or 2 list view, the
timeline will increase 5 lines.
5ꢀListꢀView
less than
1
minute
Phily and Maggy
Right as rain.That was a sense of humor...
less than
less than
1
1
minute
minute
Perseverance prevails.
I'll be there, textbook in hand!
Tinner Loberto
Greetings,I am looking for a small tiny stove in which to heat once a day.
less than
1
minute
Propatanga
Would you like the straightforward reasons that people believe in it?
less than
1
minute
Peter’s rock star
It’s not so rich a country as your country.
English
25
Switch to one of the channels on a list
Using auto mode
1 Press OK to display the last list that you selected.
1 Press AUTO MODE to set yourTV to a predefined picture and
sound setting.
2 Use ▲▼ to select a channel, then press OK.
• TheTV switches to that channel.
Note
•
Press CH+/− to select channels in a list or press the NUMBER buttons to select
channels that are not in a list. .
Sleep timer
Sleep timer can set the unit to go into Standby mode after an
incremental period of time.
2 Use ▲▼to select one of the following settings:
Auto picture Auto sound
Description
The customized settings you defined using
the Picture and Sound menu
Personal
Enhanced picture contrast, sharpness and
sound for viewing in a well-lit room
Vivid
Brilliant picture settings and clear sound for
high action
Sports
Standard
Movie
For normalTV viewing
Deep picture and powerful sound settings
for a cinematic experience
Press SLEEP repeatedly to change the amount of time
(increases the time by 5 minutes up to 180 minutes).
• Each press of ◄ will decrease the time by 5 minutes.
Optimized for PCs and game consoles
Optimized for low bitrate Internet video
Game
-
-
Internet video
• Press INFO once to call up the display for checking the
remaining time.
• To cancel sleep timer, press SLEEP or ◄► repeatedly until
EcoTV settings for low power
consumption
Power saver
-
“ 0 ” is displayed.
Optimized for music playback
-
-
Music
News
Controls picture tone and set the anchor's
voice at a comfortable volume
Create and use lists of favorite channels
You can create lists of your preferredTV channels so that you can find
those channels easily.
Select a list of favorite channels
1 Press FAV.
• Your lists of favorite channels are displayed.
2 Use ▲▼ to select the desired list, then press OK.
Create or edit a list of favorite channels
1 Press FAV to display your lists of favorite channels.
2 Use ▲▼ to select the desired list, then press OK.
3 Press OPTIONS to enter edit mode.
• A list of channels is shown.
4 Use ▲▼ to select the desired channel, then press OK to add or
remove on the list of favorite channels.
•
•
indicates that the channel is added.
indicates that the channel is removed.
5 Press MENU/E�IT to exit.
English
26
For PC Input signal
Changing picture format
Display modes can be selected when yourTV receives a 16:9 or 4:3
video signal.
Three types of display modes can be selected for a PC Input signal.
Unscaled
Wide screen
4:3
Press FORMAT repeatedly to switch theTV aspect ratio.
•
•
This unit can also be connected to your PC that has a DVI terminal. Use an HDMI-DVI
conversion cable for thisVideo connection and it requires Stereo mini 3.5mm plug Audio
cable for Analog Audio signal as well.
Refer to 16:9 video signal on this page if PC has HDMI Output.
Displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
4:3
Displays a picture that is stretched out of proportion to fill
the screen.
Wide screen
For 16:9 video signal
Displays a picture in its original size.
Unscaled
TV screen information
You can display the currently selected channel or other information
such as the aspect ratio on theTV screen.
4:3
Automatic
In the Digital mode, the detailed broadcasting information for the current
off-the-air channel such as program title and program guides are displayed.
1 Press INFO.
Full (1080i/p only)
Wide screen
Other than DTV and HDMI connected devices, enlarges
the picture to best fit the screen.
DTV and HDMI connected devices display the picture at
its original size.The subtitles may remain visible.
Automatic
Displays a 16:9 picture at a 4:3 size; the picture is
shortened horizontally.
Sidebars appear on both edges of the screen.
4:3
b
a
Displays a 16:9 picture that is stretched horizontally and
vertically.
Wide screen
11.1
KABC
Full
(1080i/p only)
Displays a 16:9 picture at its original size.
A Day of Memories
c
d
Resolution
1080i
For 4:3 video signal
Automatic
Picture format
Sound mode
Audio language
CC presence
Rating
Wide screen
Stereo
e
f
g
English
CC
None
Sleeptimer
Super zoom
4:3
h
a broadcast station
b channel number/Input mode
26
p.15
➠ p.16
➠
Movie expand 16:9
Movie expand 14:9
Wide screen
Watching channels from an external device
Other than DTV and HDMI connected devices, enlarges
the picture to best fit the screen.
DTV and HDMI connected devices display the picture at
its original size.The subtitles may remain visible.
c program title (for DTV only)
Automatic
d program’s image aspect ratio
➠
e audio language (DTV)/audio mode (AnalogTV)
Displays a 4:3 picture at a 16:9 size; the picture is stretched
horizontally and vertically and its left and right edges are
enlarged.This crops out the top and bottom of the picture.
Super zoom
4:3
Sound
p.34
➠
f CC (not available if Closed Caption is set to Off)
Displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
Caption settings
➠
g child lock rating
Displays a 4:3 picture at a 14:9 size; the picture is stretched
horizontally and vertically.
This crops out the top and bottom of the picture. Sidebars
appear on both edges of the screen.
Child and ratings lock
➠
➠
Movie expand
14:9
h remaining time of sleeptimer
Sleeptimer
Displays a 4:3 picture at a 16:9 size; the picture is stretched
horizontally and vertically.
This crops out the top and bottom of the picture.
2 Press INFO to hide the information.
Movie expand
16:9
Note
Displays a picture that is stretched out of proportion to fill
the screen.
•
•
While the program guide is displayed, the Closed Caption function is interrupted.
The information display will automatically disappear in 5 seconds.
Wide screen
English
27
Picture (JPEG)
USB
1 Use ▲▼ to select a file or a folder.
YourTV is fitted with a USB connection that enables you to view
photos, listen to music or watch MPEG files stored on a USB Memory
Stick.
avi
Image4.jpg
Image5.jpg
Image6.jpg
Image7.jpg
Image8.jpg
jpg
1 Connect the USB Memory Stick to the USB terminal on the side of
mp3
yourTV.
Image1.jpg
Image2.jpg
Image3.jpg
2 Press MENU/E�IT and use ▲▼◄► to select USB, then press
OK.
Image4.jpg
11/11/2011 11:11 AM
800×600 pixels
avi
Picture
jpg
mp3
Music
Image1.jpg
Æ∆
2 Press OK or
to start a Slide show of the files.
Image2.jpg
Video
Æ∆
• Press OKor
to pause the Slide show.
Image3.jpg
The F icon appears.
• Press E or D to move between images.
• Press BACK or C to stop the Slide show.
Image4.jpg
Image5.jpg
• Press OPTIONS to display the optional menu, then use ▲▼ to
select the desired item.
3 Use ▲▼ to select the Picture, Music or Video, then press OK.
Short
Medium
Long
Switches to the next image in 5 seconds.
Switches to the next image in 10 seconds.
Switches to the next image in 15 seconds.
No effect when switching images.
• The files recorded under the following specifications are
required.
Slide time *1
• Press OPTIONS to display the optional menu, then press OK to
switch between List and Thumbnails.
None
Picture (JPEG)
Dissolve
Wipe right
Wipe left
Wipe up
Wipe down
Box in
Overlaps a next image on a current image.
Pushes a current image out from left.
Pushes a current image out from right.
Pushes a current image out from bottom.
Pushes a current image out from top.
A next image comes into the center from out.
A next image goes to the out from center.
Upper limit
Music (MP3)
16Mpixel
Sampling frequency
Constant bit rate
Video (MPEG)
32 kHz, 44.1 kHz or 48 kHz
32 kbps - 320 kbps
Transitions *1
Maximum size of a
video
1920 x 1080
Box out
.mpg,
.mpeg
Extension
.vob
.avi
.mp4
.wmv
Selects the picture mode according to your preference.
(Vivid, Sports, Standard, Movie, Game, Internet video and
Power saver)
Auto picture
Video codec
Audio codec
MPEG1,
MPEG2
MPEG4 SP
MPEG4ASP MPEG4 (WVC1)
H.264,
WMV9
MPEG2
YES
0
Displays an image at its original direction.
Rotates an image clockwise by 90 degrees.
Rotates an image clockwise 180 degrees.
Rotates an image clockwise 270 degrees.
Displays an image at its original size.
Magnifies a current image by 2 times.
Magnifies a current image by 4 times.
AC3
YES
YES
YES
YES
NO
NO
NO
NO
90
Rotate *2
MPEG1 audio layer3
(MP3)
NO
180
270
1x
MPEG1 audio layer2
LPCM
YES
YES
NO
NO
NO
NO
NO
NO
YES
NO
NO
NO
NO
NO
YES
NO
NO
NO
NO
YES
AAC-LC
Zoom *2
2x
4x
WMA
*1 You can set Slide time and Transitions when images are in Slide show.
Note
*2 You can set Rotate and Zoom when Slide show is in Pause mode.
•
•
•
•
•
•
•
•
Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.
Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.
Up to 255 English characters can be recognized.
This unit does not support MTP(MediaTransfer Protocol).
This unit supports FAT16 and FAT32 file systems.
If the file is not supported, an error message appears.
When the USB Memory Stick is not recognized, try reconnecting it again.
We cannot be held responsible if your USB Memory Stick is not supported, nor will we
accept any liability for damage or loss of stored data.
•
A file name exceeding 128 characters or contains a dot character is not supported on
thisTV.
•
•
Progressive JPEG files are not supported.
Only an MPEG file with “.mpg”,“.mpeg”,“.vob”,“.avi” or “.mp4”extension is supported.
An extension “.mov” is not supported.
English
28
Music (MP3)
Video (MPEG)
1 Use ▲▼ to select a file or a folder.
1 Use ▲▼ to select a file or a folder.
avi
Track4.mp3
Track5.mp3
Track6.mp3
Track7.mp3
Track8.mp3
avi
Movie4.avi
Movie5.avi
Movie6.avi
Movie7.avi
Movie8.avi
jpg
jpg
mp3
mp3
Track1.mp3
Track2.mp3
Track3.mp3
Movie1.avi
Movie2.avi
Movie3.avi
Title:
Artist:
Album:
Duration: 00:05:28
Year:
Title:
Director:
Date:
Duration:
Æ∆
Æ∆
to play the selected files.
2 Press OK or
to play the selected files.
2 Press OK or
Æ∆
Æ∆
Æ∆
Æ∆
to pause, then press OKor again to
• Press OKor
to pause, then press OKor
again to
• Press OKor
resume.
resume.
• Press D to skip to the next file.
• Press E to return to the beginning of the file currently playing.
• Press C to stop playback.
• Press D to fast-forward search.
• Press E to fast-backward search.
• Press C to stop playback.
Æ∆
Press
to resume from the point at which playback was
• Press OPTIONS to display the optional menu, then use ▲▼ to
select the desired item.
stopped. Press OK to play from the beginning of the file.
• Press OPTIONS to display the optional menu, then use ▲▼ to
select the desired item.
Off
On
Off
On
Sets repeat playback to Off.
Repeat
Shuffle
Sets repeat playback for all MP3 files in the
current folder.
Not available
Subtitle Off
Displays if no subtitle is available.
Sets subtitle to Off.
Sets shuffle playback to Off.
Subtitle
Sets shuffle playback for all MP3 files in the
current folder.
The sound will not be output from the unit's
speakers.
The sound will be output from the unit's
speakers.
You can control Audio Output from your
connected EasyLink Compliant Devices with
VOL +/− by using this unit's remote control.
Selects the desired subtitle if theVideo file
contains them.
Subtitle 1-8
Off
On
The unit displays if no Audio language is
available.
Not available
Audio 1-8
Off
Audio
language
TV speakers
Selects the desired Audio language if theVideo
file contains them.
Speakers
EasyLink
The sound will not be output from the unit's
speakers.
Selects the sound mode according to your preference.
(Standard,Vivid, Sports, Movie, Music and News)
Auto sound
Note
The sound will be output from the unit's
speakers.
On
TV speakers
You can control Audio Output from your
connected EasyLink Compliant Devices with
VOL +/− by using this unit's remote control.
Speakers
EasyLink
•
TV speakers will be displayed only when Master EasyLink is set to On.
EasyLink p.39
➠
Selects the picture mode according to your preference.
(Vivid, Sports, Standard, Movie, Game, Internet video and
Power saver)
Auto picture
Auto sound
Note
Selects the sound mode according to your preference.
(Standard,Vivid, Sports, Movie, Music and News)
•
•
The resume information will be kept even when the unit isTurned Off.
If you play another file while the previously viewed file is being resumed, the resume
information of the previously viewed file will be deleted.
•
•
The file or the folder in resume stop mode will be highlighted in gray on List or
.
Thumbnails
TV speakers will be displayed only when Master EasyLink is set to On.
EasyLink p.39
➠
English
29
3 Use ▲▼ to select the desired menu and an item, then press OK
5 Use more of yourTV
or use ▲▼◄► to determine the setting.
Settings assistant
Auto picture
Backlight
Picture
Start now
Personal
This section describes the overview of the Setup menu displayed when
you press MENU/E�IT and use ▲▼◄► to select Setup.
The Setup menu consists of the function setting items below.
Sound
Features
Installation
Software
Contrast
Brightness
Color
1 Press MENU/E�IT to display Home menu.
Tint
Sharpness
2 Use ▲▼◄► to select Setup, then press OK.
Picture
➠
Watch TV
Net TV
Browse USB
Browse PC
Setup
Adjusting the picture mode or customize the picture
quality as your preference.
Add new devices
Sound
➠
Adjusting the sound mode, equalizer and some other
sound functions.
Features
➠
Adjusting the Closed Caption, parental guide and some
other useful functions.
Installation
➠
You can choose language, scan the channels available in
your area or make the Network settings.
Software
➠
You can check the current software version, update the
software or deactivate the setting for Netflix andVUDU.
4 When the setting is completed, press MENU/E�IT or BACK to
exit.
English
30
to select the desired setting, then press OK
(Color alignment, Noise reduction, Black stretch,
Picture
* Advanced picture Dynamic contrast, Gamma, MPEG artifact reduction,
Color enhancement, Custom color management
and Film mode)
Before you begin:
You must set Home in Location.
p.38
➠
Automatic
Super zoom
4:3
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
1 Press MENU/E�IT and use ▲▼◄► to select Setup, then press
Movie expand 14:9
Movie expand 16:9
Wide screen
Picture format
OK.
Changing picture format p.26
➠
2 Use ▲▼ to select Picture, then press OK.
Settings assistant
Auto picture
Backlight
Picture
Start now
Personal
Unscaled
Sound
toTurn Off image enhancement
features which makes theTV to
act purely as a monitor
Features
Installation
Software
PC
Contrast
Brightness
Color
Mode selection
Auto adjustment
to enable image enhancement
features to improve picture
quality
HDTV
to adjust the horizontal/vertical position, clock and
phase of the PC screen automatically
Tint
Sharpness
3 Use ▲▼◄► to select the item you want to adjust, then press OK.
Cursor ◄
to decrease setting value to increase setting value
to move PC screen left to move PC screen right
Cursor ►
• The following picture settings can be configured. Depending on
the format of the picture Source, some picture settings are not
available.
Clock
Phase
to guide you through the best picture setting
Settings assistant
Horizontal shift
Vertical shift
to select the desired setting, then press OK
(Personal, Vivid, Sports, Standard, Movie, Game
Internet video and Power saver)
When you adjust the following settings, Personal will
be set automatically.
to move PC screen down to move PC screen up
Continued on next page.
Auto picture
Cursor ◄
Cursor ►
to reduce power
consumption
to set the backlight
brighter
Backlight
to decrease contrast
to decrease brightness
to increase contrast
to increase brightness
Contrast
Brightness
to decrease color
intensity
to increase color intensity
Color
to add red
to soften
to add green
to sharpen
Tint
Sharpness
English
31
*You can set a particular about picture quality in Advanced picture.
to select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
Auto picture
Backlight
Contrast
Brightness
Color
Color alignment
Noise reduction
Black stretch
Mode
Minimum
On
Cursor ◄
Cursor ►
to rotate
only selected
color tint in
counterclockwise
direction
to rotate only
selected color
tint in clockwise
direction
Tint
Custom
color
management
Dynamic contrast
Gamma
Off
to decrease color to increase color
with only selected with only selected
color
Tint
MPEG artifact reduction Off
Color enhancement
Off
Saturation
Brightness
color
Sharpness
to decrease
brightness with
only selected
color
to increase
brightness with
only selected
color
Advanced picture Custom color managem Red
Off
to set film mode to Off
to set the color temperature to
Personal, Cool, Normal and Warm
When you adjust the following
settings, Personal will be set
automatically.
Film mode
Note
to optimize the picture recorded by
the original film
Auto
Mode
Cursor ◄
Cursor ►
to increase
•
Mode selection is available only if
– the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.
– the connected HDMI device is outputting a video signal.
to decrease
contrast with red contrast with red
Red gain
Green gain
Blue gain
to decrease
contrast with
green
to increase
contrast with
green
Color
alignment
to decrease
to increase
contrast with blue contrast with blue
to decrease
brightness with
red
to increase
brightness with
red
Red offset
to decrease
brightness with
green
to increase
brightness with
green
Green offset
Blue offset
to decrease
brightness with
blue
to increase
brightness with
blue
to select the desired setting, then press OK
(Off, Minimum, Medium, Maximum and Auto)
Noise
reduction
Black
stretch
to select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Dynamic
contrast
to select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Cursor ◄
Cursor ►
Gamma
to adjust the gamma encoding of images
MPEG
artifact
reduction
to select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Off
On
to set color enhancement to Off
Color
enhancement
to make colors more vivid and bright
English
32
DigitalꢀTVꢀoperation
Sound
You can select the Audio language while yourTV is receiving the Digital
broadcasting.
Before you begin:
You must set Home in Location.
Digital audio
language
to select the language according to your preference.
(It differs depending on the program.)
➠
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
Analog/CableꢀTVꢀoperation
You can select Main or SAP while yourTV is receiving the Analog
broadcasting that has the SAP (Second Audio Program).
(It differs depending on the program.)
1 Press MENU/E�IT and use ▲▼◄► to select Setup, then press
OK.
2 Use ▲▼ to select Sound, then press OK.
Main
SAP
to output main-audio
Alternate audio
to output second-audio program
Picture
Auto sound
Equalizer
Balance
Personal
Sound
Start now
Analog/CableꢀTVꢀoperation
Features
Installation
Software
When you set to Main in Alternate audio above, you can select Mono
or Stereo if the Analog broadcasting is sending the MTS (Multichannel
television sound).
Digital audio language English
SRSTruSurround XT
AVL
On
Off
On
Mono
to output mono-audio
to output stereo-audio
Mono/Stereo
Stereo
TV speakers
Delta volume
This selects sound modes for more spatial or surround sound
reproduction.
to set SRSTruSurround XT® to Off
Off
On
SRS TruSurround
�T
to set SRSTruSurround XT® to On
3 Use ▲▼◄► to select the item you want to adjust, then press
OK.
This function keeps a constant loudness differential between theTV
commercials and the programs.
The following sound settings can be configured. Depending on the
format of the broadcasting, some sound settings are not available.
Off
to remove the auto volume leveling
to select the desired setting
(Personal, Standard, Vivid, Sports, Movie, Music and
AVL
to reduce volume differences between the
TV commercials and the programs
On
News)
Auto sound
When you adjust the following settings (Equalizer,
You can select the Audio Output from the unit’s speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit’s remote control. Make sure Master EasyLink
SRS TruSurround �T and AVL), Personal will be set
automatically.
Adjust the tonal quality for each frequency.
Cursor ◄
Cursor ►
➠
Equalizer
to adjust the each level of tonal quality
not to output sound from the unit’s
speakers
Off
On
Press BACK to go back to the previous menu.
Adjust the speakers to suit your listening preference.
to output sound from the unit’s speakers
TV speakers
Cursor ◄
Cursor ►
to control Audio Output from your
connected EasyLink Compliant Devices
with VOL +/− by using this unit's remote
control.
Balance
Speakers
EasyLink
to adjust the balance of the right and left speakers
If a channel or Input device is too loud or too soft, navigate to that
channel or Input device.
Cursor ◄
Cursor ►
to set a negative delta
volume level as per your
personal preferences
to set a positive delta
volume level as per your
personal preferences
Delta volume
Note
•
Alternate audio and Mono/Stereo are not available when you watchingTV programs
with a cable box or satellite set-top box connected through an HDMI cable or
ComponentVideo cables.
English
33
DigitalꢀTVꢀoperation
Features
In addition to the basic Closed Caption, DTV has its own Closed
Caption called Digital caption service. Use this menu to change the
settings for Digital caption service.
1 Press MENU/E�IT and use ▲▼◄► to select Setup, then press
Selects one of these before changing
any other item in Caption settings
menu. Choose CS-1 under normal
circumstances.
OK.
CS-1
to
CS-6
Digital caption
service
2 Use ▲▼ to select Features, then press OK.
Picture
Caption settings
Sleeptimer
Closed captions
You can choose the size, font, color, background and other
characteristics of the caption text.
Sound
Features
Installation
Software
Child lock
Channel lock
Start now
You can reset the status of Digital
Reset to default
caption options.
Change PIN
You can change Closed Captioning font size, style, color
and transparency.
(Size, Style, Text Color and Text opacity)
Digital caption
options
You can change background color and transparency of
the displayed caption.
(Background color and Background opacity)
You can change edge color and type of the displayed
caption.
(Edge type and Edge color)
3 Adjust the following items.
Picture display
Caption settings
Closed Captioning displays the Audio portion of programming as text
superimposed over the video.
So, you must be Philip. Hi!
I’m pleased to meet you.
Font
1
Use ▲▼ to select Caption settings, then press OK.
(Style, Size,Text Color andText opacity)
Edge
(Edge color and Edge type)
Caption settings Closed captions
Sleeptimer Caption service
Off
Background
(Background color and Background opacity)
CC-1
Child lock
Digital caption service CS-1
• Review your setting choice made below by looking in the upper
left corner of the displayed setting box (not all selections show
the differences selected).
Change PIN
Digital caption options Reset to default
Analog/CableꢀTVꢀoperation
The primary caption and text services.The
CC-1
and
T-1
captioning or text is displayed in the same
language as the program’s dialog (up to 4
lines of script on theTV screen).
CC-3
and
T-3
Serve as the preferred data channels.The
captioning or text is often a secondary
language.
Off
On
not to display the Closed Caption
to display the Closed Caption
Closed captions
Rarely available and broadcasters use them
only in special conditions, such as when
CC-1 and CC-3 or T-1 and T-3 are not
available.
to display the Closed Caption when
you set to mute
On during mute
Caption service
•
There are 3 display modes according to
programs:
CC-2,
CC-4,
T-2
and
T-4
Displays input characters on
Paint-on
Pop-on
theTV screen immediately.
Once characters are stored in
memory, they are displayed all
at once.
Displays the characters
continuously by scrolling (max.
4 lines).
Roll-up
Continued on next page.
English
34
Note
Child and ratings lock
•
•
Digital caption service that you can switch differs depending on the broadcast
description.
Closed Captioning service may not be controlled by this unit’s menu options if you are
watching television through an external cable or satellite set-top box. In which case
you will need to use the menu options on the external set-top box to control Closed
Captioning.
You can prevent your children from watching certain programs or
certain channels by locking theTV controls and by using ratings.
1 Use ▲▼ to select Child lock, then press OK.
•
•
The captions do not always use correct spelling and grammar.
Not allTV programs and product commercials include Closed Caption information.
Refer to your areaTV program listings for theTV channels and times of Closed Caption
shows.The captioned programs are usually noted in theTV listings with service marks
such as CC.
Picture
Caption settings
Sleeptimer
Closed captions
Sound
•
Not all captioning services are used by aTV channel during the transmission of a
Closed Caption program.
Closed Caption will NOT be displayed when you are using an HDMI connection.
To show the Closed Caption on yourTV screen, broadcast signal must contain the
Closed Caption data.
Features
Installation
Software
Child lock
Channel lock
Start now
Change PIN
•
•
•
Not allTV programs and commercials have the Closed Caption or all types of the
Closed Caption.
•
•
•
•
Captions and texts may not exactly match theTV voice.
Changing channels may delay the Closed Caption for a few seconds.
Adjusting or muting the volume may delay the Closed Caption for a few seconds.
Abbreviations, symbols and other grammatical shortcuts may be used in order to keep
pace with the on-screen action.This is not a malfunction.
•
•
•
The caption or text characters will not be displayed while the Home menu or functions
display is shown.
If a black box appears on theTV screen, this means that the Closed Caption is set to
the text mode.To clear the box, select CC-1, CC-2, CC-3 or CC-4.
If the unit receives poor quality television signals, the captions may contain errors or
there might be no captions at all. Some possible causes of poor quality signals are:
– Automobile ignition noise
2 Use the NUMBER buttons to enter the 4-digit numbers for your
PIN code.
• When you have not set up your PIN code, enter 0, 0, 0, 0.
• When the PIN code is correct, Child lock menu is displayed.
– Electric motor noise
– Weak signal reception
See the following description for setting each item.
– Multiplex signal reception (ghosts or screen flutter)
– Data dropout and Pixelation (for DTV only)
Select
Select
Select
Select
Caption settings Channel lock
•
•
The unit retains the Closed Caption setting if the power fails.
Sleeptimer
Child lock
Change PIN
TV ratings lock
When the unit receives special effects playback signal (e.g. Search, Slow and Still) from a
VCR’s video Output channel (ch3 or ch4), the unit may not display the correct caption
or text.
Movie ratings lock
Canada English ratings lo
Canada French ratings lo Select
Region ratings lock Select
Sleeptimer
Sleep timer can set the unit to go into Standby mode after an
incremental period of time.
1 Use ▲▼ to select Sleeptimer, then press OK.
2 Use ► repeatedly to change the amount of time
(increases the time by 5 minutes up to 180 minutes).
• Each press of ◄ will decrease the time by 5 minutes.
Note
•
When you select the higher rating and set it to , the lower ratings will be blocked
automatically.
When you set the All to , all ratings return to automatically.
Region ratings lock will be available when the unit receives a Digital broadcast using
the new rating system.
To block any inappropriate programs, set your limits in TV ratings lock,
Movie ratings lock and Region ratings lock.
The child lock setting will be retained after a power failure or after the power is
removed for longer than 10 seconds.
• Press INFO once to call up the display for checking the
remaining time.
• To cancel the sleep timer, press ► repeatedly until “ 0 ” is
displayed.
•
•
•
•
Note
•
•
For the United States, the unit may download the Region Ratings LockTable, if required.
The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.
•
You can also press SLEEP directly to switch the desired setting.
p.25
➠
Continued on next page.
English
35
US movie
ratings
US TV
ratings
Channel lock
Description
Particular channels or external Input modes can be invisible in this
function.
All ratings locked including no rating
No rating
All
NR
−
None
TV-Y
TV-Y7
TV-G
TV-PG
−
3 Use ▲▼ to select Channel lock, then press OK.
Appropriate for all children
Appropriate for all children 7 and older
General audience
4 Use ▲▼ to select the particular channels or external Input, then
−
press OK repeatedly to switch between view and block.
G
•
•
indicates that the channel or Input Source is locked.
indicates that the channel or Input Source is not locked.
Parental guidance suggested
Unsuitable for children under 13
Unsuitable for children under 14
PG
PG-13
−
40.1
DTV
DTV
DTV
DTV
TV-14
Caption settings Channel lock
Restricted under 17 requires accompanying
parent or adult guardian
40.2
Sleeptimer
Child lock
Change PIN
TV ratings lock
R
−
40.3
Movie ratings lock
No one under 17 admitted
Mature audience only
NC-17
�
−
40.4
Canada English ratings lo
Canada French ratings lo
Region ratings lock
TV-MA
HDMI 1
HDMI 2
HDMI 3
Video
To set the sub ratings
ForTV ratings lock, you can further set the sub ratings to block specific
elements of programming.To set the sub ratings, follow the step below.
Use ▲▼◄► to select the desired rating, then press OK repeatedly to
switch between and
.
All
FantasyViolence
Channel lock
SettingTV and movie ratings
None
TV-Y
TV ratings lock
Movie ratings lock
Movie ratings lock is the rating system created by MPAA.TV ratings lock
has controlled access to individual programs based on their age ratings
and content rating.
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Canada English ratings
Canada French ratings
Region ratings lock
3 Use ▲▼ to select TV ratings lock or Movie ratings lock, then
press OK.
4 Use ▲▼ to select the desired rating, then press OK repeatedly to
switch between view and block.
•
•
•
indicates that the rating is locked.
indicates that the sub rating is locked.
indicates that the rating is not locked.
US TV ratings
TV-Y7
Sub Rating
TV ratings lock
FantasyViolence
Dialog
Language
Sex
TV-PG
TV-14
All
Channel lock
None
TV-Y
TV ratings lock
Movie ratings lock
Violence
Language
Sex
Violence
TV-MA
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Canada English ratings
Canada French ratings
Region ratings lock
Note
•
•
•
Blocked sub rating will appear beside the main rating category in TV ratings lock menu.
You cannot block a sub rating if the main rating is set to
Changing the category to or automatically changes all its sub ratings to the same
or ).
.
(
Continued on next page.
Movie ratings lock
All
Caption settings Channel lock
NR
G
Sleeptimer
Child lock
Change PIN
TV ratings lock
Movie ratings lock
PG
Canada English ratings lo
Canada French ratings lo
Region ratings lock
PG-13
R
NC-17
�
English
36
Canada English or Canada French ratings
Installation
You can select the rating for Canada English or Canada French
broadcasting.
1 Press MENU/E�IT and use ▲▼◄► to select Setup, then press
3 Use ▲▼ to select Canada English ratings lock or
OK.
Canada French ratings lock, then press OK.
2 Use ▲▼ to select Installation, then press OK.
4 Use ▲▼ to select the desired rating, then press OK repeatedly to
switch between view and block.
Picture
Language
English
•
•
indicates that the rating is locked.
indicates that the rating is not locked.
Sound
Channels
Autoprogram
Location
Features
Installation
Software
Preferences
Network
Canada English Canada French
ratings lock
Description
Network settings assi
Start now
ratings lock
Reset AV settings
Locked all ratings
All
E
Exempt program
For all children
C
−
−
For children over 8
C8+
General audience
G
Unsuitable for ages under 8
Parental guidance suggested
Unsuitable for ages under 13
Unsuitable for ages under 14
Unsuitable for ages under 16
Adult audience only
−
PG
−
8ans+
−
3 Adjust the following items.
13ans+
−
Language
1 Use ▲▼ to select Language, then press OK.
14+
−
16ans+
18ans+
18+
Picture
Language
English
Note
Sound
Channels
Français
Español
•
TheV-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option
to block NR, None or E programs is used in Movie ratings lock, TV ratings lock,
Canada English ratings lock or Canada French ratings lock accordingly “unusual
results may occur and the unit may not receive emergency bulletins or other types
of programming:”/Emergency Bulletins (Such as EAS messages, weather warnings
and others)/Locally originated programming/News/Political/Public Service
Announcements/Religious/Sports/Weather.
Features
Installation
Software
Preferences
Network
Reset AV settings
Change PIN
Although the default PIN code (0000) is supplied with the unit, you can
set your own PIN code.
2 Use ▲▼ to select English, Español or Français, then press OK.
1 Use ▲▼ to select Change PIN, then press OK.
Note
2 Press the NUMBER buttons to enter the new 4-digit PIN code.
•
If you need the English menu instead of the Spanish or French menu’s, press
MENU/E�IT.
• Enter PIN code again to confirm.
Use ◄►▲▼ to select Configuración or Configuration, then press OK.
Use ▲▼ to select Instalación or Installation, then press OK.
Use ▲▼ to select Idioma or Langue, then press OK.
Use ▲▼ to select English, then press OK.
Change PIN
Press MENU/E�IT to exit the Home menu.
Please enter your current PIN.
Note
•
•
Make sure new PIN code and confirm PIN code must be exactly the same. If they are
different, the space is cleared for reentering.
If you have forgotten your PIN code, enter 0711 to reset the PIN code.
English
37
Weak channel installation
Channel installation
This function lets you add the channels that were not added by the
AutoProgram due to the reception conditions during the initial setup.
It is available only when you select Antenna in Installation mode.
Be sure the RF cable is correctly connected to this unit and you are
registered with your cableTV provider when you install cable channels.
1 Use ▲▼ to select Channels, then press OK.
Autoprogram
2 Use ▲▼ to select Weak channel installation, then press OK.
If you switch wires (e.g. between antenna and CATV) or if you move
the unit to a different area after the initial setting, or if you restore the
DTV channels you deleted, it is recommended to use AutoProgram to
perform a new channel search.
• The PIN code will be required if you have locked channels.
3 Use ◄► to select channel Input box, then use ▲▼ to select a
channel you want to memorize.
You need to select the signal type in Installation mode before you
perform AutoProgram.
4 Use ◄► to select Search, then press OK.
5 Display will be changed to Store from Search when the channel is
found, then press OK.
1 Use ▲▼ to select Channels, then press OK.
2 Use ▲▼ to select Autoprogram, then press OK.
Note
• If you run Autoprogram when you have locked channels, a
message appears asking to enter your PIN code. Enter your
PIN code in order to complete the installation.You need to set
the channel lock again after the installation.
•
In most cases, Digital channels are not broadcast on the RF channel on which they
appear on yourTV.To add Digital channels you need to know the RF channel on which
the Digital channel is being broadcast. (e.g. If there is a Digital channel 9.1 which is being
broadcast on RF channel 25, you need to enter 25 while performing a weak channel
installation.)To find out the RF channel on which a particular Digital channel is being
broadcast, please contact your local service provider.
3 Press OK to select Start now.
Installing Digital channels using Weak channel installation might not work for direct
cable connections and if the Digital signal is too weak for theTV to process.
• When the scanning and memorizing are completed, the lowest
memorized channel will be displayed.
4 Follow the on-screen instructions to complete the installation.
Installation mode
1 Use ▲▼ to select Channels, then press OK.
System searching. Please wait...
2 Use ▲▼ to select Installation mode, then press OK.
3 Use ▲▼ to select Antenna or Cable, then press OK.
Digital channels found: 0
Analog channels found: 0
• When Antenna is selected, theTV detects antenna signals. It
searches for DTV and AnalogTV channels available in your area.
• When Cable is selected, theTV detects signals supplied by cable.
It searches for DTV AnalogTV and Cable channels available in
your area.
Auto programming may take more than 20 minutes to
complete.
Stop
Uninstall channels
Those channels can still be selected with the NUMBER buttons.
1 Use ▲▼ to select Channels, then press OK.
2 Use ▲▼ to select Uninstall channels, then press OK.
Note
•
•
•
•
After setting Autoprogram, using CH+/− skips unavailable programs automatically.
If you are not receiving a signal from your cable service, contact the cable provider.
If you press or during AutoProgram, the setup ofTV channels will be canceled.
Even if Autoprogram is completed, the channel setting will be lost if the AC power
3 Use ▲▼ to select the channel you want to remove, then press OK.
• You will not be able to select the channel again using CH+/−.
cord is unplugged before the unit goes into Standby mode by pressing
.
•
•
• The removed channels are not displayed on the list of favorite
channels.
• To reactivate a removed channel, use ▲▼ then press OK.
➠
If you want to change your PIN code, follow the instruction of Change PIN.
➠
English
38
Preferences
Use Philips EasyLink
You can set the unit to reduce the power consumption or adjust the
backlight brightness in Location setting.
EasyLink allows you to operate your connected EasyLink device.
YourTV supports Philips EasyLink, which enables one-touch play and
one-touch Standby between EasyLink-compliant devices. Compliant
devices must be connected via an HDMI connector.
One-touch play
When you connect yourTV to devices that support one-touch play,
Setting your location to home
you can control yourTV and the devices with one remote control. For
example, when you press ►(play) on your DVD remote control, your
TV automatically switches to the correct channel to show the DVD
content.
Choosing Home gives you full flexibility to change predefined settings
for picture and sound.
1 Use ▲▼ to select Preferences, then press OK.
2 Use ▲▼ to select Location, then press OK.
One-touch Standby
When you connect yourTV to devices that support Standby, you can
use yourTV remote control to put yourTV and all connected HDMI
devices in Standby mode.You can perform one-touch Standby using the
remote control from any of the connected HDMI devices.
Language
Location
EasyLink
Retail store
Home
Channels
Preferences
Network
System audio control
When you connect yourTV to HDMI CEC compliant devices, your
TV can switch automatically to play audio from the connected device.
To use one-touch audio, you must map the audio input from the
connected device to yourTV.You can use the remote control from the
connected device to adjust the volume.
Reset AV settings
Remote control (RC) key forwarding
RC key forwarding allows you to control EasyLink-compliant devices
using yourTV remote control.
3 Use ▲▼ to select Home, then press OK.
HDMI-ARC (Audio Return Channel)
The unit will be set up with predefined settings for
retail displays. In this setting, the power consumption
may possibly exceed the limit requirement of the
ENERGY STAR® qualification.
HDMI-ARC allows you to use Philips EasyLink to outputTV audio
directly to a connected Audio device, without the need for an additional
Digital Audio cable. Be sure that the device is HDMI CEC and ARC
compliant, and that theTV is connected to the device using an HDMI
cable attached to both HDMI-ARC connectors.
Retail store
This setting is ENERGY STAR® qualified.
The unit is set to maximize the energy efficiency
for home setting and it can be adjusted through a
choice of picture and sound quality according to your
preference.
Home
Note
Note
•
•
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
The EasyLink-compliant device must be Switched On and selected as the source.
•
•
You must set Home. Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
If you select Home, E-sticker will not be displayed.
E-sticker
When you set Location to Retail store, E-sticker (Electronic Sticker) is
displayed. E-sticker can beTurned Off using procedure below.
1 Use ▲▼ to select Preferences, then press OK.
2 Use ▲▼ to select E-sticker, then press OK.
3 Use ▲▼ to select Off, then press OK.
English
39
EasyLink
Device list
This function lets you see the product model number or name of
connected devices.
Use ▲▼ to select the desired EasyLink device listed on theTV screen,
then press OK.
This function allows you to operate the linked functions between our
brand devices with a EasyLink feature and this unit connecting through
an HDMI cable.You must connect this unit to our brand EasyLink
devices and be sure its EasyLink setting is also set to On.
Your connected EasyLink device will beTurned On if the device is in
Stand by mode.
1 Use ▲▼ to select Preferences, then press OK.
2 Use ▲▼ to select EasyLink, then press OK.
3 Use ▲▼◄► to select the item you want to adjust, then press
Device list
HDMI 1: DVD recorder
HDMI 2: Blu-ray disc player
OK.
HDMI 3: Home theater system
Location
Master EasyLink
AutoTV on
On
EasyLink
On
RC key forwarding
HDMI-ARC
Select
Off
Refresh
Back
Device list
Select
Set the Master EasyLink to On or Off.The following additional settings
will be grayed out when you set to Off.
Disables all EasyLink.
Off
Selects if you have connected an
external device that is compatible with
the EasyLink function.
Master EasyLink
On
This unit willTurn On when the Power On signal is sent from your
connected EasyLink device.
This unit stays in Standby mode even if
youTurn On your connected EasyLink
device.
Off
On
Auto TV on
This unitTurns On automatically when
youTurn On your connected EasyLink
device.
You can operate some functions such as disc playback or call up the
menu of the connected devices, by using this unit’s remote control.
You can set each HDMI input to activate the RC key forwarding. Each
press of OK will toggle RC key forwarding On or Off.
•
•
indicates that the RC key forwarding is On.
indicates that the RC key forwarding is Off.
Æ∆
PLAY, PAUSE
/STOP C /
HDMI 1
HDMI 2
HDMI 3
FWD D /REV E /OPTIONS/
▲▼◄►/OK/BACK/
the NUMBER buttons can be used
to control your connected EasyLink
devices by this unit’s remote control.
RC key forwarding
HDMI-ARC allows you to use Philips EasyLink to outputTV Audio
directly to a connected Audio device, without the need for an
additional Digital Audio cable
Disable HDMI-ARC.
Off
You can outputTV Audio through
the HDMI cable solely, provided both
theTV and device are HDMI-ARC
compliant.
HDMI-ARC
On
English
40
Wirelessꢀsetting
Select to use a wireless LAN to connect to the Internet by wireless
connection.
Network
Set up network connection settings in order to use NetTV or network
upgrade function.
4 Use ▲▼ to select Wireless, then press OK.
•
The meanings of abbreviations are defined as below.
This TV can be connected to your home
network.
Select your connection type.
AP
:Wireless LAN Access Point
:Wi-Fi protected Setup
:Wireless network name
Wireless
WPS
SSID
Wired
•
The key entry screen will appear when you select SSID,
WEP/WPA or Proxy address.
―
1
2
3
4
5
6
7
8
9
0
Cancel
a
k
u
b
l
c
d
n
x
e
o
y
f
g
q
.
h
r
-
i
j
m
w
p
z
s
t
5 Use ▲▼ to select the desired setting, then press OK.
v
_
Select this setting if your router has a WPS
button. Start scanning for wireless networks on
Clear
All clear
a/A/@
Cancel
OK
Easy connect
theTV after pressing the WPS button on your
router. If connection test fails, refer to the router’s
manual for more details.
•
Enter the key of the selected wireless network using ▲▼◄►,
then press OK.
Search for wireless networks automatically
and select the SSID from the list.
Scan
Wireless network setting
➠
Clear
: Clear the entered number or word.
: Clear all the entered numbers or words.
: Switch between abc,ABC and @!?
: Shows the cancellation display.
All clear
a/A/@
Cancel
OK
Set up the connection to the AP (e.g. wireless
router) manually by entering the SSID.
Manual entry
: Set the entered number or word.
Wiredꢀsetting
1 Use ▲▼ to select Network, then press OK.
Select to use an Ethernet cable to connect to the Internet by wired
connection. Please purchase shielded Ethernet cables at your local store
and use them when you connect to network equipment.
Picture
Language
English
Sound
Channels
Autoprogram
Location
4 Use ▲▼ to select Wired, then press OK.
Features
Installation
Software
Preferences
Network
➠
Network settings assi
Start now
Manual network settings
Reset AV settings
2 Use ▲▼ to select Manual network settings, then press OK.
Network settings assistant Network selection
Wireless
Manual network settings Wireless network setting Auto
Connection test
Setting status
IP configuration
IP setting mode
Proxy setting
Proxy configuration
Network settings assistant
Reset network settings
Before you proceed to Connection test or other settings in Network
section, set this selection to suit your preference.
2 Use ▲▼ to select Network settings assistant, then press OK.
Language
Channels
Preferences
Network
Network settings assistant Start now
Manual network settings Network selection
Networkꢀselection
Connection test
Setting status
Start now
3 Use ▲▼ to select Network selection, then press OK.
4 Use ▲▼ to select the desired setting, then press OK.
Information
Reset AV settings Reset network settings Start now
If you connect to an Ethernet cable, select Wired
to connect to the Internet.
Wired
If you have a router with WPS function, select
Wireless to connect to the Internet.
Wireless
Continued on next page.
3 Press OK to select Start now.
English
41
Wirelessꢀnetworkꢀsetting
Manually enter your SSID
This menu is displayed only when you set Wireless in
Network selection. In order to use a wireless network, you must set up
a connection to the AP(e.g. wireless router).
Set up the connection to the AP(e.g. wireless router) manually by
entering the SSID.
4 Use ▲▼ to select Manually enter your SSID, then press OK.
3 Use ▲▼ to select Wireless network setting, then press OK.
• AP(e.g. wireless router) SSID entry screen will appear.
Enter the SSID using ▲▼◄►, then press OK.
Auto
5 Use ▲▼ to select the authentication setting of the selected
Search for wireless networks automatically and select the SSID from the
list.
wireless network.
• For a wireless network with authentication setting, select the
authentication setting, according to the security type of the
wireless network.
4 Use ▲▼ to select Auto, then press OK.
5 The list of wireless networks will be displayed.
Use ▲▼ to select the appropriate the SSID, then press OK.
Select security type for
"Router 1"
None
Auto
Router 1
Enter Key
Select
WEP
Manually enter your S Router 2
WPA-PSK
Router 3
Router 4
Enter Key
Select
WPA2-PSK
Back
Set the authentication setting to None.
Set the authentication setting to WEP.
Set the authentication setting to WPA-PSK.
Set the authentication setting to WPA2-PSK.
None
WEP
• If you select the SSID with , WEP/WPA Key entry screen will
appear.
Enter the WEP/ WPA key of the selected wireless network
using ▲▼◄►, then press OK.
WPA-PSK
WPA2-PSK
• If you select the SSID has a WPS, the WPS setting screen will
appear.
• For a wireless network without authentication setting, select
None.
Use ▲▼◄► to select a setting, then press OK.
• If you selectWEP, WPA-PSK or WPA2-PSK,WEP/ WPA Key
entry screen will appear.
Enter the WEP/ WPA key of the selected wireless network
using ▲▼◄►, then press OK.
• Confirmation message will appear. Select Yes to complete the
settings.
Select this setting if your router has a WPS
button. Start scanning for wireless networks on
theTV after pressing the WPS button on your
router. If connection test fails, refer to the router’s
manual for more details.
Easy connect
WPS code
Manual
Select this setting if your router has a WPS but
does not have a WPS button. Enter the 8-digit
WPS PIN code shown on yourTV in the router
settings menu via PC before Connect is selected.
Continued on next page.
If your wireless network with authentication
setting (WEP,WPA-PSK or WPA2-PSK),
WEP/WPA Key entry screen will appear. Enter
the WEP/WPA key of the selected wireless
network using ▲▼◄►, then press OK.
• Confirmation message will appear. Select OK to complete the
settings.
Note
•
For a wireless network with authentication setting, key icon appears to the right hand
of the SSID.
•
•
•
Signal icon shows the strength of the signal.
WEP/ WPA key appears as asterisks on the confirmation screen.
The wireless LAN supports following specifications.
– Wireless standards
– Frequency spectrum
– Security protocol
: IEEE 802.11 b/g/n
: 2.4GHz
:WEP/WPA/WPA2
English
42
IPꢀconfiguration
In following cases, select IP configuration to set each setting as
Proxyꢀconfiguration
3 Use ▲▼ to select Proxy configuration, then press OK.
4 Use ▲▼ to select a setting, then press OK.
necessary.
– When connection test failed with the setting of Connection test.
– When instructed by your Internet service provider to make specific
settings in accordance with your network environment.
Network selection
Wireless network setting
IP configuration
Proxy setting
Do not use
3 Use ▲▼ to select IP configuration, then press OK.
4 Use ▲▼ to select a setting, then press OK.
Proxy configuration
Network selection
IP setting mode
Manual
Wireless network setting IP address
192.168.11.3
255.255.255.0
192.168.11.1
192.168.11.1
0.0.0.0
IP configuration
Subnet mask
Proxy configuration
Default gateway
Primary DNS
Secondary DNS
MAC address
• Do not use is selected for default settings.
00:12:0E:10:09:15
• If you need to change the proxy setting as instructed by your
Internet service provider to set the designated proxy address
and port, select Use.
Sets the IP setting automatically.
Sets the IP setting manually.
Auto
Do not use
Use
Not use the proxy server.
Uses the proxy server.
IP setting mode
Proxy setting
Manual
A set of numbers which are assigned to
IP address*1, 3
Selects the number or word by using
Proxy address*
Proxy port*
devices participating in a computer network.
▲▼◄►, then press OK.
A mask which is used to determine what
subnet an IP address belongs to.
Subnet mask*1, 3
Use ▲▼ or the NUMBER buttons to input
numbers.
IP address of the network device (such as
router) which provides Internet access.
Default gateway*1, 3
*Items can be selected only when Proxy setting is set to Use.
Note
Sets the DNS setting automatically.
Sets the DNS setting manually.
Auto
DNS
setting mode
•
•
•
The range of input numbers for the port number is between 0 and 65535.
(If you enter a number larger than 65535, it will be regarded as 65535.)
For proxy port, the selected ports may be blocked and not be able to use depending
on your network environment.
If the proxy address is entered with blank only, proxy server setting will be set to
Do not use.
Manual
A server which handles the name and IP
address over the Internet.
Primary DNS*2, 3
A server which handles the name and IP
address over the Internet.
Secondary DNS*2, 3
Connection test
An address which recognizes the devices
connecting to the network. It is also called
Hardware Address.
MAC address
Perform the following steps to test your Internet connection after you
have connected an Ethernet cable or entered network settings such as
IP address, DNS settings, etc. manually.
1
2
3
* Items can be selected only when IP setting mode is set to Manual.
* Items can be selected only when DNS setting mode is set to Manual.
* Use ▲▼ or the NUMBER buttons to input numbers.When you use
▲▼ to input numbers, then press OK or input the triple digits by using
the NUMBER buttons, the cursor moves to the next entry field.When you
use ▲▼ to input numbers, then press OK or input the triple digits by using
the NUMBER buttons at the rightmost entry field, numbers will be stored
and go back to the previous menu.
2 Use ▲▼ to select Connection test, then press OK.
3 Press OK to select Start now.
• Connection test will start automatically and the test result will
appear right after the connection test finishes.
The test is in progress.
Testing…
Pass
Note
Connection test is successfully completed.
Connection test failed. Check the connection settings.
•
•
•
•
The range of input numbers is between 0 and 255.
If you enter a number larger than 255, the number will automatically be 255.
The manually entered number will be saved even if you change the setting to Auto.
Fail
If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next
4 Press OK to go to the list of network status confirmation screen.
cell.
•
•
If the entered IP address or the default gateway or primary DNS number is same as
the default setting, IP address setting will be set to Auto. (The manually entered number
will be saved).
When IP address setting is set to Manual, the setting of DNS setting will automatically
be Manual and when IP address setting is set to Auto, you can set either Auto or
Manual for DNS setting.
Note
•
•
If the connection test passes, you are ready to use NetTV or network upgrade function
using the Internet without making any additional settings.
If the connection test fails, check if the Ethernet cable is connected to thisTV properly
or if you have entered all the required details for the wireless LAN connection properly.
Continued on next page.
English
43
Setting status
You can check the status of network settings.
Checking your current software version
1 Use ▲▼ to select Software information, then press OK.
2 Use ▲▼ to select Setting status, then press OK.
• The version and a description of the current software is
displayed.
• Network setting list will be displayed.
• MAC address of this unit will be displayed in the list.
Picture
Software information
Software update
PHL-XXXX_XXX_X
Reset network settings
Sound
You can reset the status of network settings.
Features
Installation
Software
Automatically check for
Netflix deactivation
Netflix ESN
2 Use ▲▼ to select Reset network settings, then press OK.
3 Press OK to select Start now.
VUDU deactivation
YouTube deactivation
MediaConnect code
Return your settings to default values
When you return picture and sound settings to their default values the
channel installation settings are not affected.
1 Use ▲▼ to select Reset AV settings, then press OK.
2 Press OK to select Start now.
Preparing for the software upgrade
You require the following equipment:
– A PC with web browsing capability
– An archive utility that supports the ZIP-format
(e.g.WinZip for Windows or StuffIt for Mac OS)
– An empty clean formatted USB Memory Stick
Software
Philips continuously tries to improve its products and we strongly
recommend that you upgrade theTV software when upgrades are available.
Note
•
•
Only FAT/DOS-formatted portable memory is supported.
Use only software upgrades that can be found on the Philips web site.
New software can be downloaded from our website at
information.
Warning
1 Press MENU/EXIT and use ▲▼◄► to select Setup, then press OK.
•
•
•
When the software upgrade is running, don’t press any buttons.
Do not remove the USB Memory Stick during the software upgrade.
If an error occurs during the upgrade, retry the procedure or for further assistance,
please contact Call Center.
2 Use ▲▼ to select Software, then press OK.
Picture
Software information
Software update
Select
USB
Off
Sound
Downloading the software
Find information and software related to yourTV and download the
latest software upgrade file to your PC.
Features
Installation
Software
Automatically check for
Netflix deactivation
Netflix ESN
1 On your PC, open a web browser and go to
VUDU deactivation
YouTube deactivation
MediaConnect code
2 Enter the model number in the “Type the Model Number...” field.
3 Click the desired software to be downloaded.
• Decompress the ZIP-file.
4 Copy the upgrade file to the root directory of the USB Memory
Stick.
English
44
7 Press again toTurn the unit On.
Upgrading the software
• TheTV starts up with the new software.
For further assistance, please contact Call Center.
USB upgrade
You can upgrade the software by using USB Memory Stick.
Note
•
•
In order to update software via the Internet, you must connect the unit to the Internet
and set up necessary settings. Network settings assistant p.40 Network p.40
1 Connect your USB Memory Stick with the upgrade file to the USB
➠
➠
Please do not unplug the AC power cord or Ethernet cable while executing the
terminal on the side of yourTV.
Network update.
•
•
All settings will remain the same even if you update the software version.
The version of Net service will also be updated if newer version of Net service is
available when updating the firmware.
Automatically check for latest software
This function lets you know if the latest software is available while the
unit is connected to the Internet.
1 Use ▲▼ to select Automatically check for latest software, then
press OK.
2 Use ▲▼ to select Software update, then press OK.
3 Use ▲▼ to select USB, then press OK.
4 Use ▲▼ to select the desired Update file.
5 Use ◄► to select Yes, then press OK.
Off
Disable automatically check for latest software.
A message will appear if there is the latest software on the
network server.
On
6 Read the on-screen instructions and confirm that you want to
continue with the installation.
Netflix deactivation
Displays the deactivation setting for Netflix.
Software update is in progress. Please wait.
Do not remove the USB storage device or turn the TV off while
upgrade is in progress.
1 Use ▲▼ to select Netflix deactivation, then press OK.
2 Use ▲▼ to select the desired option, then press OK.
Update your TV with new software:
Deactivate the connection to Netflix.
Yes
Activate the connection to Netflix.
No
Netflix ESN
Displays the ESN information.
7 When the software upgrade is completed, press to set the unit
to go into Standby mode, then remove the USB Memory Stick.
1 Use ▲▼ to select Netflix ESN, then press OK.
8 Unplug the AC power cord for a few seconds from AC outlet and
• Displays the ESN (Electronic Serial Number) to get any services
plug it again.
from Netflix.
9 Press again toTurn the unit On.
• TheTV starts up with the new software.
For further assistance, please contact Call Center.
VUDU deactivation
Displays the deactivation setting forVUDU.
Network update
You can update the software by connecting the unit to the Internet.
1 Use ▲▼ to select VUDU deactivation, then press OK.
2 Use ▲▼ to select the desired option, then press OK.
1 Use ▲▼ to select Software update, then press OK.
2 Use ▲▼ to select Network, then press OK.
Deactivate the connection toVUDU.
Yes
Activate the connection toVUDU.
No
3 Use ◄► to select Yes, then press OK.
• This unit will then start checking for the latest firmware version.
4 Confirmation message will appear.
YouTube deactivation
Displays the deactivation setting forYouTube.
Use ◄► to select Yes, then press OK.
• The unit will start downloading the latest firmware version.
• The unit will start updating the firmware version.
• It may take a while to complete the updating.
.
1 Use ▲▼ to select YouTube deactivation, then press OK.
2 Use ▲▼ to select the desired option, then press OK.
5 When the software update is complete, press
to make sure the
Deactivate the connection toYouTube.
Yes
unit goes to Standby mode.
Activate the connection toYouTube.
No
6 Unplug the AC power cord for a few seconds from AC outlet and
plug it again.
English
45
Connecting your devices
6 Connecting devices
HDMI Digital connection
No supplied cables are used with these connections:
HDMI connection offers the highest picture quality.
•
Please purchase the necessary cables at your local store.
HDMI (High-Definition Multimedia Interface) transports high definition
Digital video and multi-channel Digital Audio through a single cable.
Before you connect AC power cord:
Be sure other devices are connected properly before plugging in the AC
power cord.
set-top box
or
Selecting your connection quality
IN
OUT
Blu-ray disc player
or
HDMI - Highest quality
HDMI cable
HD game console
HDMI-DVI connection
This unit can be connected to your device that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires
Audio cable for Analog Audio signal as well.
Supports high-definition Digital signals and gives highest picture and
sound quality.Video and Audio signals are combined in one cable.You
must use HDMI for full high-definition video and to enable Philips
EasyLink.
Note
•
•
Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP
is a form of Digital Rights Management that protects high definition content in Blu-ray
discs or DVDs.
The HDMI-ARC connector on theTV features HDMI-ARC functionality.This allows
output ofTV Audio to an HDMI-ARC-compliant device.
cable receiver or
satellite box with the
DVI Output jack
IN
OUT
HDMI-DVI
conversion cable
OUT
IN
Component (Y Pb Pr) - High quality
Audio (L/R) cables
Note
•
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI
cable is recommended for the better compatibility.
For HDMI connection
•
The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video signals, 32kHz
/ 44.1kHz and 48kHz of Audio signals.
•
•
This unit accepts 2 channel Audio signal (LPCM) only.
This unit accepts only signals in compliance with EIA861.
Supports high-definition Analog signals but gives lower picture quality than
HDMI. Component (Y/Pb/Pr)Video cables combine Red/Green/Blue
video cables with Red/White Audio (L/R) cables. Match the cable
colors when you connect to theTV.
For HDMI-DVI connection
•
•
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
HDMI-DVI connection requires separate Audio connections as well and the Audio
signals are output as Analog (L/R) Audio.
•
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
Composite - Basic quality
For Analog connections. CompositeVideo/Audio Analog cable usually
combine aYellow video cable with Red/White Audio (L/R) cables.
With this unit,Yellow cable must be connected toY (Green) of
ComponentVideo Input jacks.
English
46
HDMI-ARC connection
Composite AnalogVideo Connection
HDMI-ARC allows you to use EasyLink to outputTV Audio directly to
a connected Audio device, without the need for an additional Digital
Audio cable.
Composite AnalogVideo connection offers standard picture quality for
video devices connected to the unit.
If you connect to the unit’s CompositeVideo (Y/VIDEO) Input jack,
connect Audio cables to the Audio (L/R) Input jacks.When the Audio is
monaural, then only connect to the Audio L Input jack.
OUT
HDMI 1 IN only
OUT
Digital home theater
amplifier
HDMI-ARC
HDMI cable
DVD player
IN
Audio (L/R) +Video cables
Note
•
•
The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to
output Digital Audio to an HDMI home theater system.
Be sure that the device is HDMI CEC and ARC compliant and that theTV is connected
to the device using an HDMI cable attached to HDMI-ARC connectors.
Note
•
•
With this unit,Yellow cable must be connected toY (Green) of ComponentVideo Input
jacks.
Whenever you connect to the CompositeVideo Input jack (Y/VIDEO), you must
disconnect the ComponentVideo Input jacks (Pb and Pr). If you leave those jacks
connected, it may cause of unstable picture.
Component AnalogVideo Connection
•
Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
Component AnalogVideo connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s ComponentVideo (Y/Pb/Pr) Input jacks,
connect Analog Audio cables to the Analog Audio (L/R) Input jacks.
Connecting theTV to the Internet using an Ethernet cable
Internet
OUT
set-top box
Audio (L/R) cables
or
LAN
IN
OUT
IN
Network provisioning
Ethernet cable
Note
equipment
Blu-ray disc/DVD
recorder
Component (Y/Pb/Pr)Video cables
Note
•
The unit accepts 480i/480p/720p and 1080i/p of video signals for this connection.
•
Please purchase shielded Ethernet cables at your local store and use them when you
connect to network equipment.
•
•
After connecting an Ethernet cable,set up necessary network settings.Network
Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid
damaging the unit.
➠
•
•
If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
If your telecommunications equipment (modem, etc.) has broadband router functions
but there is no vacant port, use a hub.
•
•
For a broadband router, use a router which supports 10BASE-T/100BASE-TX.
Do not connect your PC directly to the Ethernet port of this unit.
English
47
Connecting theTV to the Internet using a wireless LAN
PC connection
HDMI connection
This unit can be connected to your PC that has a HDMI terminal. Use
an HDMI cable for this Digital connection.
Broadband router
WLAN
USB wireless LAN
Ethernet cable
adapter
Internet
IN
OUT
LAN
HDMI cable
PC
Network provisioning
equipment
Note
•
•
After you made the wireless connection, set up necessary network settings.
Network p.40
Use a Wireless LAN Access Point(AP)(e.g. wireless router) which supports IEEE
802.11 b/g/n. (n is recommended for stable operation of the wireless network.)
This unit does not support Ad-hoc mode.
Other radio devices or obstacles may cause interference to the wireless network
connection.
➠
HDMI-DVI connection
This unit can be connected to your PC that has a DVI terminal. Use
an HDMI-DVI conversion cable for thisVideo Digital connection and it
requires Stereo mini 3.5mm plug Audio cable for Analog Audio signal as
well.
•
•
Digital Audio Output Connection
If you connect this unit to an external Digital Audio device, you can
enjoy multi-channel Audio like 5.1ch Digital broadcasting sound.
Use a Digital Audio coaxial cable to connect the unit to external Digital
Audio devices.
IN
OUT
HDMI-DVI
conversion cable
PC
OUT
IN
IN
Digital Audio coaxial cable
Stereo mini 3.5 mm plug Audio cable
OUT
Digital home theater
amplifier
VGA connection
This unit is equipped with a PC Input jack. If you connect this unit to
your PC, you can use this unit as a PC monitor.
Use aVGA cable for thisVideo connection and it requires a Stereo mini
3.5mm plug Audio cable for Analog Audio signal as well.
VGA cable
OUT
PC
IN
OUT
IN
Stereo mini 3.5 mm plug Audio cable
English
48
The following video signals can be displayed:
Format
VGA
Resolution
Refresh rate
x
640
480
x
x
SVGA
XGA
800
600
60Hz
1,024
1,280
1,360
768
768
768
x
x
WXGA
Other formats or non-standard signals will not be displayed correctly.
Note
•
•
Please purchase theVGA cable or HDMI-DVI conversion cable that has a ferrite core.
The following operations may reduce noise.
– Attach a ferrite core to the AC power cord of your PC.
– Unplug the AC power cord and use the built-in battery of your PC.
•
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI
cable is recommended for the better compatibility.
•
•
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
HDMI-DVI connection requires separate Audio connections as well and the Audio
signals are output as Analog (L/R) Audio.
•
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
USB Memory Stick
This unit offers easy playback of picture (JPEG), music (MP3) and video
(MPEG) files.
Insert the USB Memory Stick into the USB terminal shown below.
USB
➠
Note
•
•
The unit recognizes only a USB Memory Stick.
Do not use a USB hub or an extension cable to connect an external hard disk drive to
the unit. (Not supported.)
•
•
•
•
A USB Memory Stick is always inserted to this unit directly.
A USB Memory Stick is not supplied with this unit.
We do not guarantee that all USB Memory Sticks can be supported by this unit.
Be sure to keep a backup copy of the original files on your device before you play them
back on this unit.We have no responsibilities for damage or loss of your stored data.
•
•
•
•
To protect your USB Memory Stick files from being erased place the write protect
sliding tab in the protect position.
When you are ready to remove a USB Memory Stick, set the unit to go into Standby
mode to avoid any damage to your data and the unit.
A USB Memory Stick that requires its own driver or the device with a special system
such as fingerprint recognition are not supported.
This unit is not allowed to use the USB Memory Stick which requires an external
power supply (500mA or more).
English
49
7 Useful tips
FAQ
Question
Answer
My remote control does not
work.
What should I do?
• Check the antenna or cable connection to the main unit.
• Check the batteries of the remote control.
• Check if there is an obstacle between the infrared sensor window and the remote control.
p.52 If okay, then possible infrared sensor trouble.
➠
• Aim the remote control directly at the infrared sensor window on the front of the unit.
• Reduce the distance to the unit.
• Re-insert the batteries with their polarities (+/–) as indicated.
• When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal of this unit. Move
the infrared-equipped device away from this unit, change the angle of the infrared sensor orTurn Off the infrared communication
function.
How come the initial setup
appears every time I Turn On
this unit?
• Make sure to complete the initial setup before the unit goes into Standby mode.
Why can I not watch some RF
signal TV programs.
• Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavailable
channels are broadcast.
• Make sure Autoprogram has been completed.
➠
• The selected channel may not be broadcasting.
• When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the
Autoprogram. p.37
➠
➠
• The unit requires some kind of antenna Input.An indoor antenna (Digital orVHF/UHF), an external antenna (Digital orVHF/UHF)
or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the unit.
How come there is no image
from the connected external
devices?
• Check if the correct Input mode is selected by pressing SOURCE. Watching channels from an external device
➠
• Check the antenna, cable or other Input connection to the unit.
• When using the ComponentVideo Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected
to their corresponding colored jacks on the unit.
When I enter a channel number, • Many Digital channels have alternate channel numbers.The unit changes the numbers automatically to the ones signifying the
it changes automatically.
broadcasting station channel number.These basic numbers used for previous Analog broadcasts. (e.g., Input ch# 30 automatically
changes to ch# 6.1)
Why are captions not displayed • Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning production
entirely? Or, captions are
delayed behind the dialog.
companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective editing is used to
insure that the captions remain up-to date with the currentTV screen dialog.
How can I set the clock ?
• There is no clock function on this unit.
I cannot change the Child lock
setting because my PIN code no
longer works.
• Although the default PIN code (0000) is supplied with the unit, the PIN code will be required once you set a PIN code in Child
and ratings lock.
➠
➠
Troubleshooting
If the unit does not perform properly when operated as instructed in this User Manual,
check the following chart and all connections once before calling for service.
Symptom
Remedy
No power
• Make sure the AC power cord is plugged in.
• Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the AC outlet to ensure that the AC
outlet operates normally.
• If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.
Control buttons do not work.
• Press only one button at a time. Do NOT press more than one button at the same time.
• Ensure that no buttons on the remote control are depressed and move freely.
Continued on next page.
English
50
Symptom
Remedy
Power is ON but no screen
image.
• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
• Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray/DVD recorder.
• Make sure that the selected Input mode is connected to the working Input jack.
• Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode.Tap any key on the keyboard to
wake up your computer.
No picture or sound
• Check if the Power is On.
• Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray/DVD recorder.
• View otherTV channels.The problem might be limited to the broadcasting station or weak signal strength.
• Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord andTurn On the unit again.
• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
• Make sure that the selected Input mode is connected to the working Input jack.
• Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode.Tap any key on the keyboard to
wake up your computer.
• Make sure that the sound is not muted. Press MUTE so that the volume bar and current volume level will appear on theTV screen.
• Make sure that the volume is NOT set to 0 or . If so, use VOL +/− to adjust to the desired volume.
• Make sure that the headphone is NOT connected to the Headphone Audio Output jack.
• Make sure that the TV speakers is NOT set to Off.
No color
• View otherTV channels.The problem might be limited to the broadcasting station or weak signal strength.
• Adjust Color in Picture settings.
➠
No sound, distorted sound or
incorrect Audio Sound is heard
when using the HDMI-DVI
connections.
• Make sure that the Analog Audio signals from the HDMI-DVI device are connected to the Analog Audio (L/R) Input jacks.
• When using Component AnalogVideo, Composite AnalogVideo or PCVGAVideo make sure that the Analog Audio (L/R)
connectors are mounted into the Audio (L/R) Input jacks.
Adjusted Picture or Sound
settings are not effective every
time the unit isTurned On.
• You must set Home in Location.
➠
Otherwise, the settings you adjusted will not be memorized after the unit goes into Standby mode.
Sound OK, picture poor
• Electrical interference from nearby appliances may affect picture quality when viewing an off-the-air low power NTSC analog
broadcast signal.
• Adjust Contrast and Brightness in Picture settings.
➠
• View otherTV channels.The problem might be limited to the broadcasting station or weak signal strength.
• For the best picture quality, watch High Definition wide screen programs.
If the HD content is not available, watch Standard Definition programs instead.
Picture OK, sound poor
• View otherTV channels.The problem might be limited to the broadcasting station or weak signal strength.
• Check if the Audio cable is connected into the unit correctly.
You see a distorted picture or
hear an unusual sound.
• You may be getting interference from electrical appliances, automobiles, motorcycles or fluorescent lights when viewing an off-the-
air low power NTSC analog broadcast signal.
• Try moving the unit to another location to see if this is the cause of the problem.
Ghosts, lines or streaks in picture • Electrical interference from nearby appliances may affect picture quality when viewing an off-the-air low power NTSC analog
broadcast signal.
• View otherTV channels.The problem might be limited to the broadcasting station or weak signal strength.
You see noise or trash on the
screen.
• When the capabilities of the unit exceed the capabilities of the Digital broadcasting, the signal will be increased to match the
capabilities of the display of the unit.This may cause noise or trash.
When viewing an off-the-air low power NTSC Analog broadcast signal may show noise or trash on the screen.
Different color marks on theTV
screen
• View otherTV channels.The problem might be limited to the broadcasting station, missing data or pixelation.
You switch to a different Input
and the volume changes.
• This unit will memorize the volume level from the last time you adjusted it.
• If the volume of the sound from another device is higher or lower, then the loudness will change.
• Make sure AVL is set to On.
➠
You switch to a different Input
and the screen size changes.
• This unit will memorize the viewing mode from the last time you used the particular Input modes.
The display image does not
cover the entire screen.
• If you are using the unit as a PC monitor, make sure that Horizontal shift and Vertical shift in Picture are set correctly.
➠
• If you are watchingTV or using the CompositeVideo, ComponentVideo or HDMI with 480i Input, press FORMAT repeatedly to
switch various screen modes.
Captions are displayed as a white • Interference from buildings or weather conditions may cause captioning to be incomplete if watching AnalogTV (NTSC) signals.
box. No caption is displayed in
• Broadcasting station may shorten the program to insert advertisements.
the Closed Caption-supported
• The Closed Caption decoder cannot read the information of the shortened program.
program.
Black box is displayed on theTV
screen.
• The text mode is Selected. For caption, select CC-1, CC-2, CC-3 or CC-4.
Cannot connect to the network. • Check if the Ethernet cable connection is properly made.Turn On the modem or broadband router.
• Check the network settings.
• Check if the broadband router and/or modem is correctly connected.
Sometimes video quality is poor
when using the wireless LAN.
• The wireless network connection quality varies depending on the distance or obstacles (e.g. wall, basement, 2nd floor) between theTV
Wireless LAN Adapter and the wireless router (access point), from other wireless networks, and brand and type of the wireless router
(access point).When using theWireless LAN of theTV, it is suggested to place the wireless router as close as possible to theTelevision.
Continued on next page.
English
51
Symptom
Remedy
Wireless LAN connection fails or • Check the installation location of theTV and wireless router (access point). Signal quality may be affected for the following reasons.
– Interference of other wireless devices, microwaves, fluorescent lights, etc., are placed nearby.
wireless connection is poor.
– There are floors or walls between the wireless router andTV.
– If the problems continue even after checking the above, try making a wired LAN connection.
Cannot use the wireless
connection.
• Check if the Wireless LAN Access Point (AP) (e.g. wireless router) is oriented properly or not placed too close between them.
• Once you have activated the wireless connection please wait 30 seconds for the connection to be established afterTurning On the
unit, before trying to access network features such as NetTV.
Cannot use Netflix feature.
• Netflix is available only in the United States and Canada.
• Check if the network connection is properly made.
Cannot add movies orTV
episodes to the Instant Queue.
Even though the speed of the
Internet connection improves
during playback, the picture
quality of Netflix streaming
movie does not improve.
• The picture quality does not change during playback. It differs depending on the speed of Internet connection at the time of loading.
Cannot useVUDU feature.
• VUDU is available only in the United States.
• Check if the network connection is properly made.
Cannot rent or buy movies /TV
episodes onVUDU.
• You need to activate theVUDU account. For detailed information, please visit the service providers website at
The picture quality of streaming
movie (Netflix, Film Fresh or
VUDU) is poor.
• Check the speed of your Internet connection.You need speeds of at least 8 Mbps to this player for high quality uninterrupted
playback.
Streaming movie (Netflix,
Film Fresh orVUDU) often
stops or starts buffering during
playback.
• Contact your Internet service provider to troubleshoot your Internet connection for speed and line quality. Consistent line quality
and speed are very important for Internet video playback.
Cannot connect to the network
while my PC is connected to the
network.
• Check the content of your Internet service contract to see if your Internet Service Provider prevents multiple terminals connecting
at the same time.
Folder or files stored on DLNA
home media server are not
displayed in the file list or cannot
be played back.
• Check the setting on your home media server. (Refer to the user manual of the home media server.)
• Check the network connection and settings.
Cannot use Film Fresh feature.
• Film Fresh is available only in the United States.
• Check if the network connection is properly made.
Cannot use Pandora feature.
• Check if the network connection is properly made.
• Pandora is available only in the United States.
➠
The audio of Internet radio
station interrupted.
• vTuner server, station or the Internet connection is busy.The bit rate of the station is high.
Cannot play back Internet radio.
• Check if the network connection is properly made.
• Check the firewall setting of the modem or router.
• For some stations, playback is not available on this unit.
The quality of the Internet radio
audio is poor or noise occurs
during playback of Internet
station.
• The bit rate of the station is low.
Cannot get into the
PC's screen even the
Philips Wireless MediaConnect is
launched.
• The start up screen (PHILIPS logo with spinning circle) keep displaying until the unit found the PC that is running
Philips Wireless MediaConnect.
• Make sure if the network connection is connected properly.
• Check if your PC runs Philips Wireless MediaConnect.
• Make sure yourTV and PC are connected on the same network.
I have a 1.8GHz CPU but
MediaConnect does not work
on my PC.
• For smooth operation of your PC while Philips Wireless MediaConnect is running you need a mainstream dual core processor from
Intel® or AMD.
Intel® : Core™2 Duo or Core™ i3/5/7 @ 1.8GHz or higher.
AMD :Athlon™ II X2,Turion™ II Dual-Core or Phenom™ X2 @ 2GHz or higher.
Note
•
•
The LCD screen is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red.
This is not to be considered a defect in the LCD screen.
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this User Manual for more details on correct operations.
English
52
8 Information
Glossary
Maintenance
DTV (ATSC)
Cabinet Cleaning
Acronym that stands for AdvancedTelevision Systems Committee and the name
of the Digital broadcasting standards.
•
•
Wipe the front panel and other exterior surfaces of the unit with
a soft cloth.
Never use a solvent or alcohol. Do not spray insecticide liquid near
the unit. Such chemicals may cause damage and discoloration to
the exposed surfaces.
Aspect ratio
The width of aTV screen relative to its height. ConventionalTVs are 4:3 (in other
words, theTV screen is almost square); widescreen models are 16:9 (theTV
screen is almost twice as wide as its height).
Panel Cleaning
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand devices with
CEC feature and this unit.We do not guarantee 100% interoperability with other
brands of CEC compliant devices.
Wipe the panel of the unit with a soft cloth. Before cleaning the panel,
disconnect the AC power cord.
Servicing
ComponentVideo
Should your unit become inoperative, do not try to correct the
problem yourself.There are no user serviceable parts inside. Call our
toll free customer support line found on the cover of this User Manual
to locate an authorized service center.
This is a video signal format that conveys each of 3 principal colors of light
(red, blue and green) through different signal lines.This allows the viewers to
experience picture colors as original as it is.There are several signal formats,
includingY/Pb/Pr andY/Cb/Cr.
Dolby Digital
IR Signal Check
If the remote control is not working properly, you can use a Digital
camera (including a cellular phone with built-in camera) to see if it is
sending out an infrared signal.
The system developed by Dolby Laboratories to compress Digital sound. It offers
stereo sound (2ch) or multi-channel Audio.
E-sticker
With a Digital camera
(including built-in cell phone cameras):
E-sticker is showing set features, technical information, etc on thisTV set
that is displayed on theTV screen mainly used byTV retailers. Previously the
information was on a printed sticker that was put on the display.
Point the Digital Camera towards the remote control
infrared diode at the front of the remote control.
Press any button on the remote control and loOK
through the camera display. If the infrared pulsating
light appears through the camera, the remote control
is sending out an IR signal.
HDMI (High-Definition Multimedia Interface)
Interface that supports all uncompressed, Digital Audio/Video formats including
set-top box, Blu-ray/DVD recorder or Digital television, over a single cable.
HDTV (High Definition TV)
Ultimate Digital format that produces high resolution and high picture quality.
Analog TV (NTSC)
Acronym that stands for NationalTelevision Systems Committee and the name
of Analog broadcasting standards.
off-the-air NTSC signals are no longer being sent by major broadcasting stations
in the USA.
PIN code
A stored 4-digit number that allows access to parental control features.
SAP (Secondary Audio Program)
Second-Audio channel delivered separately from main-Audio channel.This Audio
channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard Digital format that is similar to the AnalogTV (NTSC) picture quality.
SRS TruSurround �T®
Creates a truly immersive surround sound experience with rich bass and clear
dialog from only two speakers.
English
53
9 Specifications
Model #
Pictureꢀenhancement
Type
32PFL4907
26PFL4907
22PFL4907
160° (V) by 170° (H)
2W x 2
WXGA (1366 x 768 pixels 60Hz)
16:9
Aspect ratio
Viewing angles
178° (V) by 178° (H)
150° (V) by 160° (H)
ATSC / NTSC
Built-in Digital tuner
Soundꢀenhancement
Mono / Stereo
Mono, Stereo, SRSTruSurround XT®
Power output (RMS watts)
Equalizer
8 W x 2
5 band
Easeꢀofꢀuse
SD (4:3 Source)
: Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 /
Wide screen
HD (16:9 Source)
HDMI AV (4:3 Source)
: Automatic / 4:3 / Wide screen / Full (1080i/p only)
: Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 /
Wide screen
Picture format
HDMI AV (16:9 Source)
PC Source
: Automatic / 4:3 / Wide screen / Full (1080i/p only)
: 4:3 / Wide screen / Unscaled
(Refer to HDMI AV (16:9 Source) above if PC has HDMI Output. )
Photo Slide show
MP3 playback
JPEG files only
MP3 files only
MPEG1(.mpg/.mpeg), MPEG2(.mpg/.mpeg/.vob), H.264(.mp4),
MPEG4 SP/ASP(.avi), MPEG4(.mp4),WVC1(.wmv)
Video playback
Connections
1
ComponentVideo Input
supporting video signals : 480i/p, 720p, 1080i/p 60Hz
CompositeVideo Input
(sharedY terminal of Component
Video)
1
3
supporting video signals : 480i/p, 720p, 1080i/p, 24Hz-60Hz
HDMI-ARC (HDMI 1 only)
HDMI Input
PC-Input signal up to WXGA (1360 x 768)
Audio L/R Input
PC Input
1
viaVGA, HDMI and HDMI-DVI + Analog Audio L/R
2
1 terminal mainly for wireless LAN adapter, both terminals function as a USB input terminal
USB
Wireless LAN
Ethernet port
Supporting wireless standards : IEEE 802.11 b/g/n (2.4GHz)
1
1
Digital Audio Output
Headphone Output
supporting Dolby Digital
1
1/8 inches (3.5mm)
Power
Power requirements
Temperature
Operating temperature
120V~ AC +/− 10%, 60Hz +/− 0.5%
41 °F (5 °C) to 104 °F (40 °C)
•
Specifications are subject to change without prior notice.
English
54
10 Warranty
LIMITED WARRANTY
( )
ONE 1 YEAR
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
or a part that has been modified without written company per-
mission, or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS
IS” by some retailers.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory, or (3)
refund the original purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1 866 309 0843
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to new company manufac-
tured products that can be identified by the trademark, trade
name, or logo affixed to it. This Limited Warranty does not apply THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
to any hardware product or any software, even if packaged or
sold with the product, as manufacturers, suppliers, or publishers
may provide a separate warranty for their own products pack-
aged with the bundled product.
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
The company is not liable for any damage to or loss of any pro-
grams, data, or other information stored on any media contained
within the product, or other additional product or part not cov-
ered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited
Warranty.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248
061708
i
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
License
0.
This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The “Program”,
below, refers to any such program or work, and a "work based
on the Program" means either the Program or any derivative
work under copyright law: that is to say, a work containing the
Program or a portion of it, either verbatim or with modifications
and/or translated into another language. (Hereinafter, translation
is included without limitation in the term “modification".) Each
licensee is addressed as “you”. Activities other than copying,
distribution and modification are not covered by this License;
they are outside its scope.The act of running the Program is not
restricted,and the output from the Program is covered only if its
contents constitute a work based on the Program (independent
of having been made by running the Program). Whether that is
true depends on what the Program does.
This product uses some open source software:
GPL software:linux, gcc, sysfsutils, Realtek WiFi driver, binutils, busybox,
dhcpcd
LGPL software: directfb, glibc, Qt
MIT: Expat, c-ares, libxml2, lua, lua-xmlreader, lua-slncrypto, giflib
MIT/X: cURL
gSOAP Public License: gSOAP
BSD:WPA Supplicant
zlib/libpng License: zlib, libpng
XML-RPC FOR C/C++ license: xmlrpc
FreeType, LibJPEG, OpenSSL, MINIX 3, unicode, ADPCM, OpenGL
1.
You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to the absence
of any warranty; and give any other recipients of the Program a
copy of this License along with the Program.You may charge a fee
for the physical act of transferring a copy, and you may at your
option offer warranty protection in exchange for a fee.
GPL
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
Preamble
2.
You may modify your copy or copies of the Program or any
portion of it, thus forming a work based on the Program, and
copy and distribute such modifications or work under the terms
of Section 1 above, provided that you also meet all of these
conditions:
The licenses for most software are designed to take away your freedom
to share and change it. By contrast, the GNU General Public License is
intended to guarantee your freedom to share and change free software
to make sure the software is free for all its users. This General Public
License applies to most of the Free Software Foundation's software
and to any other program whose authors commit to using it. (Some
other Free Software Foundation software is covered by the GNU Lesser
General Public License instead.)You can apply it to your programs, too.
a)You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b)You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or
any part thereof, to be licensed as a whole at no charge to all
third parties under the terms of this License.
When we speak of free software, we are referring to freedom, not price.
Our General Public Licenses are designed to make sure that you have the
freedom to distribute copies of free software (and charge for this service
if you wish), that you receive source code or can get it if you want it, that
you can change the software or use pieces of it in new free programs;and
that you know you can do these things.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else,saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but does
not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
To protect your rights, we need to make restrictions that forbid anyone
to deny you these rights or to ask you to surrender the rights. These
restrictions translate to certain responsibilities for you if you distribute
copies of the software, or if you modify it. For example, if you distribute
copies of such a program, whether gratis or for a fee, you must give the
recipients all the rights that you have.You must make sure that they, too,
receive or can get the source code. And you must show them these
terms so they know their rights.
These requirements apply to the modified work as a whole.
If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms, do
not apply to those sections when you distribute them as separate
works. But when you distribute the same sections as part of a
whole which is a work based on the Program, the distribution of
the whole must be on the terms of this License,whose permissions
for other licensees extend to the entire whole, and thus to each
and every part regardless of who wrote it.
We protect your rights with two steps:(1) copyright the software, and (2)
offer you this license which gives you legal permission to copy, distribute
and/or modifythe software.
Also, for each author's protection and ours, we want to make certain that
everyone understands that there is no warranty for this free software. If
the software is modified by someone else and passed on, we want its
recipients to know that what they have is not the original, so that any
problems introduced by others will not reflect on the original authors'
reputations.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is
to exercise the right to control the distribution of derivative or
collective works based on the Program.
Finally, any free program is threatened constantly by software patents.
We wish to avoid the danger that redistributors of a free program
will individually obtain patent licenses, in effect making the program
proprietary To prevent this, we have made it clear that any patent must
be licensed for everyone's free use or not licensed at all.
In addition, mere aggregation of another work not based on
the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does
not bring the other work under the scope of this License.
The precise terms and conditions for copying, distribution and
modification follow.
ii
3.
You may copy and distribute the Program (or a work based on
it, under Section 2) in object code or executable form under the
terms of Sections 1 and 2 above provided that you also do one of
the following:
could satisfy both it and this License would be to refrain entirely
from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended
to apply and the section as a whole is intended to apply in other
circumstances.
a) Accompany it with the complete corresponding machine-
readable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used
for software interchange; or,
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of
any such claims; this section has the sole purpose of protecting
the integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee
cannot impose that choice.
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to
be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with
such an offer, in accord with Subsection b above.)
This section is intended to make thoroughly clear what is believed
to be a consequence of the rest of this License.
8.
9.
If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.
The source code for a work means the preferred form of the work
for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains,
plus any associated interface definition files,plus the scripts used to
control compilation and installation of the executable. However, as
a special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on)
of the operating system on which the executable runs, unless that
component itself accompanies the executable.
The Free Software Foundation may publish revised and/or new
versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but
may differ in detail to address new problems or concerns.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
Each version is given a distinguishing version number. If the
Program specifies a version number of this License which applies
to it and “any later version”, you have the option of following the
terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does
not specify a version number of this License, you may choose any
version ever published by the Free Software Foundation.
4.
5.
You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program
is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights,
from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
10.
If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the
author to ask for permission. For software which is copyrighted
by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision
will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and
reuse of software generally.
You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify
or distribute the Program or its derivative works. These actions
are prohibited by law if you do not accept this License.Therefore,
by modifying or distributing the Program (or any work based on
the Program), you indicate your acceptance of this License to do
so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERSAND/OROTHERPARTIESPROVIDETHEPROGRAM
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITEDTO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
6.
7.
Each time you redistribute the Program (or any work based on
the Program), the recipient automatically receives a license from
the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose
any further restrictions on the recipients' exercise of the rights
granted herein.You are not responsible for enforcing compliance
by third parties to this License.
If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the
Program at all. For example, if a patent license would not permit
royalty-free redistribution of the Program by all those who receive
copies directly or indirectly through you, then the only way you
12.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW
OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTYWHO MAY MODIFY AND/
OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE,
BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE
iii
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
LGPL
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
END OFTERMS AND CONDITIONS
How to ApplyTheseTerms toYour New Programs
Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these
terms.To do so, attach the following notices to the program. It is safest to
attach them to the start of each source file to most effectively convey the
exclusion of warranty;and each file should have at least the “copyright”
line and a pointer to where the full notice is found.
[This is the first released version of the Lesser GPL. It also counts as
the successor of the GNU Library Public License, version 2, hence the
version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom
to share and change it. By contrast, the GNU General Public Licenses are
intended to guarantee your freedom to share and change free software
to make sure the software is free for all its users.
one line to give the program's name and an idea of what it does.
Copyright (C) yyyy name of author
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This license, the Lesser General Public License, applies to some specially
designated software packages--typically libraries--of the Free Software
Foundation and other authors who decide to use it.You can use it too,
but we suggest you first think carefully about whether this license or
the ordinary General Public License is the better strategy to use in any
particular case, based on the explanations below.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
the GNU General Public License for more details.
When we speak of free software, we are referring to freedom of use,
not price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and charge
for this service if you wish); that you receive source code or can get it if
you want it; that you can change the software and use pieces of it in new
free programs; and that you are informed that you can do these things.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you by electronic and paper
mail.
To protect your rights, we need to make restrictions that forbid
distributors to deny you these rights or to ask you to surrender these
rights.These restrictions translate to certain responsibilities for you if you
distribute copies of the library or if you modify it.
If the program is interactive, make it output a short notice like this when
it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
For example, if you distribute copies of the library, whether gratis or for a
fee, you must give the recipients all the rights that we gave you.You must
make sure that they, too, receive or can get the source code. If you link
other code with the library, you must provide complete object files to
the recipients, so that they can relink them with the library after making
changes to the library and recompiling it.And you must show them these
terms so they know their rights.
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
type ‘show w’.This is free software, and you are welcome to redistribute
it under certain conditions; type ‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show c’ should show the
appropriate parts of the General Public License.Of course,the commands
you use may be called something other than ‘show w’ and ‘show c’; they
could even be mouse-clicks or menu items--whatever suits your program.
We protect your rights with a two-step method: (1) we copyright the
library, and (2) we offer you this license, which gives you legal permission
to copy, distribute and/or modify the library.
You should also get your employer (if you work as a programmer) or
your school, if any, to sign a “copyright disclaimer” for the program, if
necessary.
To protect each distributor, we want to make it very clear that there is no
warranty for the free library. Also, if the library is modified by someone
else and passed on, the recipients should know that what they have is not
the original version, so that the original author's reputation will not be
affected by problems that might be introduced by others.
Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
‘Gnomovision’ (which makes passes at compilers) written by James
Hacker.
Finally, software patents pose a constant threat to the existence of any
free program. We wish to make sure that a company cannot effectively
restrict the users of a free program by obtaining a restrictive license from
a patent holder.Therefore, we insist that any patent license obtained for
a version of the library must be consistent with the full freedom of use
specified in this license.
signature ofTy Coon, 1 April 1989
Ty Coon, President ofVice
This General Public License does not permit incorporating your program
into proprietary programs. If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications
with the library. If this is what you want to do, use the GNU Lesser
General Public License instead of this License.
Most GNU software, including some libraries, is covered by the ordinary
GNU General Public License. This license, the GNU Lesser General
Public License, applies to certain designated libraries, and is quite different
from the ordinary General Public License.We use this license for certain
libraries in order to permit linking those libraries into non-free programs.
If you are interested in obtaining GPL source code used in this product,
please contact
Open Source Team, P&F USA, Inc.,PO Box 2248, Alpharetta, GA 30023-
2248.
When a program is linked with a library, whether statically or using a
shared library, the combination of the two is legally speaking a combined
work, a derivative of the original library. The ordinary General Public
License therefore permits such linking only if the entire combination fits
iv
its criteria of freedom.The Lesser General Public License permits more
lax criteria for linking other code with the library.
1.
You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided
that you conspicuously and appropriately publish on each copy
an appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to the absence
of any warranty; and distribute a copy of this License along with
the Library.
We call this license the “Lesser” General Public License because it does
Less to protect the user's freedom than the ordinary General Public
License. It also provides other free software developers Less of an
advantage over competing non-free programs. These disadvantages are
the reason we use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain special
circumstances.
You may charge a fee for the physical act of transferring a copy,
and you may at your option offer warranty protection in exchange
for a fee.
For example,on rare occasions,there may be a special need to encourage
the widest possible use of a certain library, so that it becomes a de-facto
standard.To achieve this, non-free programs must be allowed to use the
library. A more frequent case is that a free library does the same job as
widely used non-free libraries. In this case, there is little to gain by limiting
the free library to free software only, so we use the Lesser General Public
License.
2.
You may modify your copy or copies of the Library or any portion
of it, thus forming a work based on the Library, and copy and
distribute such modifications or work under the terms of Section
1 above, provided that you also meet all of these conditions:
a)The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices
stating that you changed the files and the date of any change.
In other cases, permission to use a particular library in non-free programs
enables a greater number of people to use a large body of free software.
For example, permission to use the GNU C Library in non-free programs
enables many more people to use the whole GNU operating system, as
well as its variant, the GNU/Linux operating system.
c)You must cause the whole of the work to be licensed at no
charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table
of data to be supplied by an application program that uses
the facility, other than as an argument passed when the facility
is invoked, then you must make a good faith effort to ensure
that, in the event an application does not supply such function
or table, the facility still operates, and performs whatever part
of its purpose remains meaningful. (For example, a function
in a library to compute square roots has a purpose that is
entirely well-defined independent of the application.Therefore,
Subsection 2d requires that any application-supplied function
or table used by this function must be optional:if the application
does not supply it, the square root function must still compute
square roots.)
Although the Lesser General Public License is Less protective of the users'
freedom, it does ensure that the user of a program that is linked with the
Library has the freedom and the wherewithal to run that program using
a modified version of the Library.
The precise terms and conditions for copying,distribution and modification
follow. Pay close attention to the difference between a “work based on
the library” and a “work that uses the library”.The former contains code
derived from the library, whereas the latter must be combined with the
library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Library,
and can be reasonably considered independent and separate
works in themselves, then this License, and its terms, do not apply
to those sections when you distribute them as separate works.
But when you distribute the same sections as part of a whole
which is a work based on the Library, the distribution of the whole
must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every
part regardless of who wrote it.
0.
This License Agreement applies to any software library or other
program which contains a notice placed by the copyright holder
or other authorized party saying it may be distributed under
the terms of this Lesser General Public License (also called “this
License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or
data prepared so as to be conveniently linked with application
programs (which use some of those functions and data) to form
executables.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is
to exercise the right to control the distribution of derivative or
collective works based on the Library.
The “Library”, below, refers to any such software library or work
which has been distributed under these terms. A “work based
on the Library” means either the Library or any derivative
work under copyright law: that is to say, a work containing the
Library or a portion of it, either verbatim or with modifications
and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term
“modification”.)
In addition, mere aggregation of another work not based on the
Library with the Library (or with a work based on the Library) on
a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3.
You may opt to apply the terms of the ordinary GNU General
Public License instead of this License to a given copy of the
Library.To do this, you must alter all the notices that refer to this
License, so that they refer to the ordinary GNU General Public
License, version 2, instead of to this License. (If a newer version
than version 2 of the ordinary GNU General Public License has
appeared, then you can specify that version instead if you wish.)
Do not make any other change in these notices.
“Source code” for a work means the preferred form of the work
for making modifications to it. For a library, complete source code
means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control
compilation and installation of the library.
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running a program using the Library is not restricted, and output
from such a program is covered only if its contents constitute a
work based on the Library (independent of the use of the Library
in a tool for writing it).Whether that is true depends on what the
Library does and what the program that uses the Library does.
Once this change is made in a given copy, it is irreversible for that
copy, so the ordinary GNU General Public License applies to all
subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of
the Library into a program that is not a library.
v
4.
You may copy and distribute the Library (or a portion or
derivative of it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that
you accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms
of Sections 1 and 2 above on a medium customarily used for
software interchange.
b) Use a suitable shared library mechanism for linking with the
Library. A suitable mechanism is one that (1) uses at run time
a copy of the library already present on the user's computer
system,rather than copying library functions into the executable,
and (2) will operate properly with a modified version of the
library, if the user installs one, as long as the modified version is
interface-compatible with the version that the work was made
with.
If distribution of object code is made by offering access to copy
from a designated place, then offering equivalent access to copy
the source code from the same place satisfies the requirement
to distribute the source code, even though third parties are not
compelled to copy the source along with the object code.
c) Accompany the work with a written offer, valid for at least
three years, to give the same user the materials specified in
Subsection 6a, above, for a charge no more than the cost of
performing this distribution.
5.
A program that contains no derivative of any portion of the Library,
but is designed to work with the Library by being compiled or
linked with it, is called a “work that uses the Library”. Such a work,
in isolation, is not a derivative work of the Library, and therefore
falls outside the scope of this License.
d) If distribution of the work is made by offering access to copy
from a designated place, offer equivalent access to copy the
above specified materials from the same place.
e)Verify that the user has already received a copy of these
materials or that you have already sent this user a copy.
However, linking a “work that uses the Library” with the Library
creates an executable that is a derivative of the Library (because
it contains portions of the Library), rather than a “work that uses
the library”.The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
For an executable, the required form of the “work that uses
the Library” must include any data and utility programs needed
for reproducing the executable from it. However, as a special
exception, the materials to be distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on)
of the operating system on which the executable runs, unless that
component itself accompanies the executable.
When a “work that uses the Library” uses material from a header
file that is part of the Library, the object code for the work may
be a derivative work of the Library even though the source code
is not.Whether this is true is especially significant if the work can
be linked without the Library, or if the work is itself a library.The
threshold for this to be true is not precisely defined by law.
It may happen that this requirement contradicts the license
restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you
cannot use both them and the Library together in an executable
that you distribute.
If such an object file uses only numerical parameters, data
structure layouts and accessors, and small macros and small inline
functions (ten lines or less in length), then the use of the object
file is unrestricted, regardless of whether it is legally a derivative
work. (Executables containing this object code plus portions of
the Library will still fall under Section 6.)
7.
You may place library facilities that are a work based on the
Library side-by-side in a single library together with other
library facilities not covered by this License, and distribute such
a combined library, provided that the separate distribution of the
work based on the Library and of the other library facilities is
otherwise permitted, and provided that you do these two things:
Otherwise, if the work is a derivative of the Library, you may
distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under
Section 6, whether or not they are linked directly with the Library
itself.
a) Accompany the combined library with a copy of the same
work based on the Library, uncombined with any other library
facilities. This must be distributed under the terms of the
Sections above.
6.
As an exception to the Sections above, you may also combine or
link a “work that uses the Library” with the Library to produce
a work containing portions of the Library, and distribute that
work under terms of your choice, provided that the terms permit
modification of the work for the customer's own use and reverse
engineering for debugging such modifications.
b) Give prominent notice with the combined library of the fact
that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the
same work.
8.
You may not copy, modify, sublicense, link with, or distribute
the Library except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your
rights under this License. However, parties who have received
copies, or rights, from you under this License will not have
their licenses terminated so long as such parties remain in full
compliance.
You must give prominent notice with each copy of the work
that the Library is used in it and that the Library and its use are
covered by this License.You must supply a copy of this License.
If the work during execution displays copyright notices, you must
include the copyright notice for the Library among them, as well
as a reference directing the user to the copy of this License. Also,
you must do one of these things:
a) Accompany the work with the complete corresponding
machine-readable source code for the Library including
whatever changes were used in the work (which must be
distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete
machine-readable “work that uses the Library”, as object code
and/or source code, so that the user can modify the Library
and then relink to produce a modified executable containing
the modified Library. (It is understood that the user who
changes the contents of definitions files in the Library will not
necessarily be able to recompile the application to use the
modified definitions.)
9.
You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify
or distribute the Library or its derivative works.These actions are
prohibited by law if you do not accept this License.Therefore, by
modifying or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Library or works based on it.
10.
Each time you redistribute the Library (or any work based on the
Library), the recipient automatically receives a license from the
original licensor to copy, distribute, link with or modify the Library
vi
subject to these terms and conditions. You may not impose
any further restrictions on the recipients' exercise of the rights
granted herein.You are not responsible for enforcing compliance
by third parties with this License.
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITEDTO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS
WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE,YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.
11.
If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the
Library at all. For example, if a patent license would not permit
royalty-free redistribution of the Library by all those who receive
copies directly or indirectly through you, then the only way you
could satisfy both it and this License would be to refrain entirely
from distribution of the Library.
16.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW
OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTYWHO MAY MODIFY AND/
OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE,
BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER
SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY AS
BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended
to apply, and the section as a whole is intended to apply in other
circumstances.
END OFTERMS AND CONDITIONS
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of
any such claims; this section has the sole purpose of protecting
the integrity of the free software distribution system which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee
cannot impose that choice.
How to ApplyTheseTerms toYour New Libraries
If you develop a new library, and you want it to be of the greatest possible
use to the public, we recommend making it free software that everyone
can redistribute and change.You can do so by permitting redistribution
under these terms (or, alternatively, under the terms of the ordinary
General Public License).
To apply these terms, attach the following notices to the library. It is
safest to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least the
“copyright” line and a pointer to where the full notice is found.
This section is intended to make thoroughly clear what is believed
to be a consequence of the rest of this License.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
12.
13.
If the distribution and/or use of the Library is restricted in
certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Library under this
License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.
This library is free software; you can redistribute it and/or modify it under
the terms of the GNU Lesser General Public License as published by the
Free Software Foundation; either version 2.1 of the License, or (at your
option) any later version.This library is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU Lesser General Public License for more details.
The Free Software Foundation may publish revised and/or new
versions of the Lesser General Public License from time to time.
Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems or concerns.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
USA
Each version is given a distinguishing version number. If the Library
specifies a version number of this License which applies to it and
“any later version”, you have the option of following the terms
and conditions either of that version or of any later version
published by the Free Software Foundation. If the Library does
not specify a license version number, you may choose any version
ever published by the Free Software Foundation.
Also add information on how to contact you by electronic and paper
mail.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a “copyright disclaimer” for the library, if necessary.
Here is a sample; alter the names:
14.
If you wish to incorporate parts of the Library into other free
programs whose distribution conditions are incompatible with
these, write to the author to ask for permission. For software
which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions
for this. Our decision will be guided by the two goals of preserving
the free status of all derivatives of our free software and of
promoting the sharing and reuse of software generally.
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob'
(a library for tweaking knobs) written by James Random Hacker.
<signature ofTy Coon>, 1 April 1990
Ty Coon, President ofVice
That's all there is to it!
If you are interested in obtaining GPL source code used in this product,
please contact Open Source Team, P&F USA, Inc.,PO Box 2248,
Alpharetta, GA 30023-2248.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY
vii
the rights to use, copy, modify, merge, publish, distribute, sublicense, and/
or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
MIT
Expat
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
and Clark Cooper
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
USE OR OTHER DEALINGS INTHE SOFTWARE.
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
c-ares
Copyright 1998, 2009 by the Massachusetts Institute ofTechnology.
Copyright (C) 2007-2009 by Daniel Stenberg
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in supporting
documentation, and that the name of M.I.T. not be used in advertising
or publicity pertaining to distribution of the software without specific,
written prior permission. M.I.T. makes no representations about the
suitability of this software for any purpose. It is provided “as is” without
express or implied warranty.
MIT/�
cURL
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2009, Daniel Stenberg, <[email protected]>.
All rights reserved.
libxml2
Permission to use, copy, modify, and distribute this software for any
purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies.
Copyright (C) 1998-2003 DanielVeillard. All Rights Reserved.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF
THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY,WHETHER IN AN ACTION OF CONTRACT,TORT
OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITHTHE SOFTWARE ORTHE USE OR OTHER DEALINGS INTHE
SOFTWARE.
lua
Copyright (c) 1994-2010 Lua.org, PUC-Rio
lua-xmlreader
Copyright (c) 2008 A.S. Bradbury
lua-slncrypto
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or
other dealings in this Software without prior written authorization of the
copyright holder.
giflib
The GIFLIB distribution is Copyright (c) 1997 Eric S. Raymond
gSOAP
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the“Software”),
to deal in the Software without restriction,including without limitation the
rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van
Engelen, Genivia inc.All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED
BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
OF MERCHANTABILITY AND FITNESS FOR
A
PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
USE OR OTHER DEALINGS INTHE SOFTWARE.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the Software),
to deal in the Software without restriction, including without limitation
viii
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
BSD
Copyright (c) 2003-2010, Jouni Malinen <j@w1.fi> and contributors
All Rights Reserved.
1.
Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
2.
Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
1.
Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2.
Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
3.
The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,ORCONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANYWAY OUT OFTHE USE OFTHIS SOFTWARE, EVEN
IF ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE.
3.
Neither the name(s) of the above-listed copyright holder(s) nor
the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS
AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT,STRICT LIABILITY,ORTORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
FreeType
Portions of this software are copyright (c) 2001, 2002, 2003, 2004, 2006
The FreeType Project (www.freetype.org). All rights reserved.
LibJPEG
zlib/libpng License
This software is based in part on the work of the Independent JPEG
Group.
zlib.h -- interface of the 'zlib' general purpose compression library version
1.2.3, July 18th, 2005
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
OpenSSL
This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from
the use of this software.
LICENSE ISSUES
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of
the OpenSSL License and the original SSLeay license apply to the toolkit.
See below for the actual license texts.Actually both licenses are BSD-style
Open Source licenses. In case of any license issues related to OpenSSL
please contact [email protected].
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it freely,
subject to the following restrictions:
1.
The origin of this software must not be misrepresented; you
must not claim that you wrote the original software. If you use
this software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
OpenSSL License
Copyright (c) 1998-2011The OpenSSL Project.All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
2.
3.
Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
This notice may not be removed or altered from any source
distribution.
1.
Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
Jean-loup Gailly
Mark Adler
2.
Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
The data format used by the zlib library is described by RFCs (Request for
(zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
3.
4.
All advertising materials mentioning features or use of this
software must display the following acknowledgment: “This
product includes software developed by the OpenSSL Project for
use in the OpenSSLToolkit. (http://www.openssl.org/)”
xmlrpc
The names“OpenSSLToolkit”and“OpenSSL Project”must not be
used to endorse or promote products derived from this software
without prior written permission. For written permission, please
contact [email protected].
XML-RPC For C/C++ License
Copyright (C) 2001 by First Peer, Inc. All rights reserved.
Copyright (C) 2001 by Eric Kidd.All rights reserved.
ix
5.
6.
Products derived from this software may not be called“OpenSSL”
nor may “OpenSSL” appear in their names without prior written
permission of the OpenSSL Project.
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT,STRICT LIABILITY,ORTORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
Redistributions of any form whatsoever must retain the following
acknowledgment: “This product includes software developed by
openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT
``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO,THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED.IN NO EVENT SHALL THE OpenSSL PROJECT
OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANYWAY OUT OFTHE USE OFTHIS SOFTWARE, EVEN
IF ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or
derivative of this code cannot be changed.i.e. this code cannot simply be
copied and put under another distribution licence
[including the GNU Public Licence.]
MINI� 3
This product includes cryptographic software written by EricYoung
Copyright (c) 1987,1997, 2006,Vrije Universiteit,Amsterdam,
The Netherlands All rights reserved.
This product includes software written by Tim Hudson (tjh@cryptsoft.
com).
Redistribution and use of the MINIX 3 operating system in source and
binary forms, with or without modification, are permitted provided that
the following conditions are met:
Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
Original SSLeay License
All rights reserved.
Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
This package is an SSL implementation written by Eric Young (eay@
cryptsoft.com).
Neither the name of theVrije Universiteit nor the names of the software
authors or contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as
the following conditions are aheared to. The following conditions apply
to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc.,
code; not just the SSL code.The SSL documentation included with this
distribution is covered by the same copyright terms except that the
Any deviations from these conditions require written permission from
the copyright holder in advance
unicode
Unicode Copyright.
Copyright remains EricYoung's, and as such any Copyright notices in the
code are not to be removed. If this package is used in a product, Eric
Young should be given attribution as the author of the parts of the library
used.This can be in the form of a textual message at program startup or
in documentation (online or textual) provided with the package.
1.
2.
Copyright c 1991-2011 Unicode, Inc. All rights reserved.
Certain documents and files on this website contain a legend
indicating that “Modification is permitted." Any person is hereby
authorized, without fee, to modify such documents and files to
create derivative works conforming to the UnicodeR Standard,
subject toTerms and Conditions herein.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
3.
Any person is hereby authorized, without fee, to view, use,
reproduce, and distribute all documents and files solely for
informational purposes in the creation of products supporting the
Unicode Standard, subject to theTerms and Conditions herein.
1.
Redistributions of source code must retain the copyright notice,
this list of conditions and the following disclaimer.
2.
Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
4.
5.
Further specifications of rights and restrictions pertaining to
the use of the particular set of data files known as the Unicode
Character Database can be found in Exhibit 1.
3.
4.
All advertising materials mentioning features or use of this
software must display the following acknowledgement: “This
product includes cryptographic software written by Eric Young
Each version of the Unicode Standard has further specifications
of rights and restrictions of use. For the book editions (Unicode
5.0 and earlier), these are found on the back of the title page.
The online code charts carry specific restrictions. All other files,
including online documentation of the core specification for
Unicode 6.0 and later, are covered under these general Terms of
Use.
The word 'cryptographic' can be left out if the rouines from the
library being used are not cryptographic related :-).
If you include any Windows specific code (or a derivative thereof)
from the apps directory (application code) you must include an
acknowledgement:“This product includes software written byTim
Hudson ([email protected])”
6.
No license is granted to "mirror" the Unicode website where a
fee is charged for access to the "mirror" site.
x
7.
Modification is not permitted with respect to this document. All
copies of this document must be verbatim.
both that copyright notice and this permission notice appear in supporting
documentation, and that the names of Stichting Mathematisch Centrum
or CWI not be used in advertising or publicity pertaining to distribution
of the software without specific, written prior permission.
E�HIBIT 1
UNICODE, INC. LICENSE AGREEMENT
SOFTWARE
-
DATA FILES AND
STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL
WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS,
IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM
BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OFTHIS SOFTWARE.
Unicode Data Files include all data files under the directories
PDF online code charts under the directory
published in the Unicode Standard or under the directories
NOTICE TO USER: Carefully read the following legal agreement. BY
DOWNLOADING, INSTALLING, COPYING OR OTHERWISE USING
UNICODE INC.'S DATA FILES ("DATA FILES"), AND/OR SOFTWARE
("SOFTWARE"), YOU UNEQUIVOCALLY ACCEPT, AND AGREE TO
BE BOUND BY, ALL OF THE TERMS AND CONDITIONS OF THIS
AGREEMENT. IF YOU DO NOT AGREE, DO NOT DOWNLOAD,
INSTALL, COPY, DISTRIBUTE OR USE THE DATA FILES OR
SOFTWARE.
OpenGL
Notice
License Applicability. Except to the extent portions of this file are made
subject to an alternative license as permitted in the SGI Free Software
License B,Version 1.0 (the “License”), the contents of this file are subject
only to the provisions of the License.You may not use this file except in
compliance with the License. You may obtain a copy of the License at
Silicon Graphics, Inc., attn: Legal Services, 1600 Amphitheatre Parkway,
COPYRIGHT AND PERMISSION NOTICE
Copyright c 1991-2011 Unicode, Inc. All rights reserved. Distributed
MountainView, CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB
Note that, as provided in the License, the Software is distributed on
an “AS IS” basis, with ALL EXPRESS AND IMPLIED WARRANTIES
AND CONDITIONS DISCLAIMED, INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS
OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
Permission is hereby granted, free of charge, to any person obtaining a
copy of the Unicode data files and any associated documentation (the
Data Files) or Unicode software and any associated documentation
(the Software) to deal in the Data Files or Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish,
distribute, and/or sell copies of the Data Files or Software, and to permit
persons to whom the Data Files or Software are furnished to do so,
provided that (a) the above copyright notice(s) and this permission
notice appear with all copies of the Data Files or Software, (b) both the
above copyright notice(s) and this permission notice appear in associated
documentation, and (c) there is clear notice in each modified Data File or
in the Software as well as in the documentation associated with the Data
File(s) or Software that the data or software has been modified.
Original Code. The Original Code is: OpenGL Sample Implementation,
Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
Inc.The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
Copyright in any portions created by third parties is as indicated
elsewhere herein. All Rights Reserved.
Additional Notice Provisions: The application programming interfaces
established by SGI in conjunction with the Original Code are The
OpenGL(R) Graphics System: A Specification (Version 1.2.1), released
April 1, 1999;The OpenGL(R) Graphics System Utility Library (Version
1.3), released November 4, 1998; and OpenGL(R) Graphics with the
X Window System(R) (Version 1.3), released October 19, 1998. This
software was created using the OpenGL(R) version 1.2.1 Sample
Implementation published by SGI,but has not been independently verified
as being compliant with the OpenGL(R) version 1.2.1 Specification. SGI
FREE SOFTWARE LICENSE B (Version 1.1 [02/22/2000])
THE DATA FILESAND SOFTWAREARE PROVIDED "AS IS",WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR HOLDERS INCLUDED INTHIS NOTICE BE LIABLE FOR
ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OFTHE DATA FILES OR SOFTWARE.
1.
Definitions.
1.1. “Additional Notice Provisions” means such additional provisions
as appear in the Notice in Original Code under the heading
“Additional Notice Provisions.”
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or
other dealings in these Data Files or Software without prior written
authorization of the copyright holder.
1.2. “Covered Code” means the Original Code or Modifications, or
any combination thereof.
1.3. “Hardware” means any physical device that accepts input,
processes input, stores the results of processing, and/or provides
output.
ADPCM
1.4. “Larger Work” means a work that combines Covered Code or
portions thereof with code not governed by the terms of this
License.
Copyright 1992 by Stichting Mathematisch Centrum, Amsterdam, The
Netherlands.
All Rights Reserved
1.5. “Licensable” means having the right to grant, to the maximum
extent possible, whether at the time of the initial grant or
subsequently acquired, any and all of the rights conveyed herein.
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
1.6. “License” means this document.
xi
1.7. “Licensed Patents” means patent claims Licensable by SGI that are
infringed by the use or sale of Original Code or any Modifications
provided by SGI, or any combination thereof.
Hardware of the algorithms embodied in the Original Code or
any Modifications provided by SGI .
3.
Redistributions.
1.8. “Modifications” means any addition to or deletion from the
substance or structure of the Original Code or any previous
Modifications.When Covered Code is released as a series of files,
a Modification is:
3.1. Retention of Notice/Copy of License. The Notice set forth in
Exhibit A, below, must be conspicuously retained or included in
any and all redistributions of Covered Code. For distributions of
the Covered Code in source code form, the Notice must appear
in every file that can include a text comments field; in executable
form, the Notice and a copy of this License must appear in related
documentation or collateral where the Recipient’s rights relating
to Covered Code are described.Any Additional Notice Provisions
which actually appears in the Original Code must also be retained
or included in any and all redistributions of Covered Code.
A.Any addition to the contents of a file containing Original Code
and/or addition to or deletion from the contents of a file
containing previous Modifications.
B.Any new file that contains any part of the Original Code or
previous Modifications.
1.9. “Notice” means any notice in Original Code or Covered Code, as
required by and in compliance with this License.
3.2. Alternative License. Provided that Recipient is in compliance
with the terms of this License, Recipient may, so long as without
derogation of any of SGI’s rights in and to the Original Code,
distribute the source code and/or executable version(s) of
Covered Code under (1) this License; (2) a license identical to
this License but for only such changes as are necessary in order
to clarify Recipient’s role as licensor of Modifications; and/or (3) a
license of Recipient’s choosing, containing terms different from this
License, provided that the license terms include this Section 3 and
Sections 4, 6, 7, 10, 12, and 13, which terms may not be modified
or superseded by any other terms of such license. If Recipient
elects to use any license other than this License, Recipient must
make it absolutely clear that any of its terms which differ from
this License are offered by Recipient alone, and not by SGI. It is
emphasized that this License is a limited license, and, regardless of
the license form employed by Recipient in accordance with this
Section 3.2, Recipient may relicense only such rights, in Original
Code and Modifications by SGI, as it has actually been granted by
SGI in this License.
1.10. “Original Code” means source code of computer software code
that is described in the source code Notice required by Exhibit
A as Original Code, and updates and error corrections specifically
thereto.
1.11. “Recipient” means an individual or a legal entity exercising rights
under, and complying with all of the terms of, this License or a
future version of this License issued under Section 8. For legal
entities,“Recipient” includes any entity that controls, is controlled
by, or is under common control with Recipient. For purposes of
this definition,“control” of an entity means (a) the power, direct or
indirect, to direct or manage such entity, or (b) ownership of fifty
percent (50%) or more of the outstanding shares or beneficial
ownership of such entity.
1.12.“Recipient Patents” means patent claims Licensable by a Recipient
that are infringed by the use or sale of Original Code or any
Modifications provided by SGI, or any combination thereof.
1.13.“SGI” means Silicon Graphics, Inc.
3.3. Indemnity. Recipient hereby agrees to indemnify SGI for any
liability incurred by SGI as a result of any such alternative license
terms Recipient offers.
1.14.“SGI Patents” means patent claims Licensable by SGI other than the
Licensed Patents.
2.
License Grant and Restrictions.
4.
Termination. This License and the rights granted hereunder will
terminate automatically if Recipient breaches any term herein and
fails to cure such breach within 30 days thereof. Any sublicense
to the Covered Code that is properly granted shall survive any
termination of this License, absent termination by the terms of
such sublicense. Provisions that, by their nature, must remain in
effect beyond the termination of this License, shall survive.
2.1. SGI License Grant. Subject to the terms of this License and
any third party intellectual property claims, for the duration
of intellectual property protections inherent in the Original
Code, SGI hereby grants Recipient a worldwide, royalty-free,
non-exclusive license, to do the following: (i) under copyrights
Licensable by SGI, to reproduce, distribute, create derivative
works from, and, to the extent applicable, display and perform the
Original Code and/or any Modifications provided by SGI alone
and/or as part of a Larger Work; and (ii) under any Licensable
Patents, to make, have made, use, sell, offer for sale, import and/
or otherwise transfer the Original Code and/or any Modifications
provided by SGI. Recipient accepts the terms and conditions of
this License by undertaking any of the aforementioned actions.The
patent license shall apply to the Covered Code if, at the time any
related Modification is added, such addition of the Modification
causes such combination to be covered by the Licensed Patents.
The patent license in Section 2.1(ii) shall not apply to any other
combinations that include the Modification. No patent license is
provided under SGI Patents for infringements of SGI Patents by
Modifications not provided by SGI or combinations of Original
Code and Modifications not provided by SGI. 2.2. Recipient
License Grant. Subject to the terms of this License and any third
party intellectual property claims, Recipient hereby grants SGI
and any other Recipients a worldwide, royalty-free, non-exclusive
license, under any Recipient Patents, to make, have made, use, sell,
offer for sale, import and/or otherwise transfer the Original Code
and/or any Modifications provided by SGI.
5.
No Trademark Or Other Rights.This License does not grant any
rights to: (i) any software apart from the Covered Code, nor
shall any other rights or licenses not expressly granted hereunder
arise by implication, estoppel or otherwise with respect to the
Covered Code; (ii) any trade name, trademark or service mark
whatsoever, including without limitation any related right for
purposes of endorsement or promotion of products derived
from the Covered Code, without prior written permission of SGI;
or (iii) any title to or ownership of the Original Code, which shall
at all times remains with SGI. All rights in the Original Code not
expressly granted under this License are reserved.
6.
Compliance with Laws; Non-Infringement. There are various
worldwide laws, regulations, and executive orders applicable
to dispositions of Covered Code, including without limitation
export, re-export, and import control laws, regulations, and
executive orders, of the U.S. government and other countries, and
Recipient is reminded it is obliged to obey such laws, regulations,
and executive orders. Recipient may not distribute Covered
Code that (i) in any way infringes (directly or contributorily) any
intellectual property rights of any kind of any other person or
entity or (ii) breaches any representation or warranty, express,
2.3. No License For Hardware Implementations.The licenses granted
in Section 2.1 and 2.2 are not applicable to implementation in
xii
implied or statutory, to which, under any applicable law, it might be
deemed to have been subject.
effect as the original provision and the remainder of this License
will remain in effect. This License shall be governed by and
construed in accordance with the laws of the United States and
the State of California as applied to agreements entered into and
to be performed entirely within California between California
residents. Any litigation relating to this License shall be subject to
the exclusive jurisdiction of the Federal Courts of the Northern
District of California (or, absent subject matter jurisdiction in such
courts, the courts of the State of California), with venue lying
exclusively in Santa Clara County, California, with the losing party
responsible for costs, including without limitation, court costs and
reasonable attorneys fees and expenses. The application of the
United Nations Convention on Contracts for the International
Sale of Goods is expressly excluded. Any law or regulation that
provides that the language of a contract shall be construed against
the drafter shall not apply to this License.
7.
8.
Claims of Infringement. If Recipient learns of any third party claim
that any disposition of Covered Code and/or functionality wholly
or partially infringes the third party’s intellectual property rights,
Recipient will promptly notify SGI of such claim.
Versions of the License. SGI may publish revised and/or new
versions of the License from time to time,each with a distinguishing
version number. Once Covered Code has been published under
a particular version of the License, Recipient may, for the duration
of the license, continue to use it under the terms of that version,
or choose to use such Covered Code under the terms of any
subsequent version published by SGI. Subject to the provisions of
Sections 3 and 4 of this License, only SGI may modify the terms
applicable to Covered Code created under this License.
9.
DISCLAIMER OF WARRANTY. COVERED CODE IS
PROVIDED“AS IS.”ALL EXPRESS AND IMPLIEDWARRANTIES
AND CONDITIONS ARE DISCLAIMED, INCLUDING,
WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND
CONDITIONS OF MERCHANTABILITY, SATISFACTORY
QUALITY,FITNESS FORA PARTICULAR PURPOSE,AND NON-
INFRINGEMENT. SGI ASSUMES NO RISK ASTOTHE QUALITY
AND PERFORMANCE OF THE SOFTWARE. SHOULD
THE SOFTWARE PROVE DEFECTIVE IN ANY RESPECT, SGI
ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR
OR CORRECTION. THIS DISCLAIMER OF WARRANTY IS
AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY
COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT
SUBJECTTOTHIS DISCLAIMER.
Exhibit A
License Applicability. Except to the extent portions of this file are made
subject to an alternative license as permitted in the SGI Free Software
License B,Version 1.1 (the “License”), the contents of this file are subject
only to the provisions of the License.You may not use this file except in
compliance with the License. You may obtain a copy of the License at
Silicon Graphics, Inc., attn: Legal Services, 1600 Amphitheatre Parkway,
MountainView, CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB
Note that, as provided in the License, the Software is distributed on
an “AS IS” basis, with ALL EXPRESS AND IMPLIED WARRANTIES
AND CONDITIONS DISCLAIMED, INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS
OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
10.
LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES
NOR LEGAL THEORY, WHETHER TORT (INCLUDING,
WITHOUT LIMITATION, NEGLIGENCE OR STRICT
LIABILITY), CONTRACT, OR OTHERWISE, SHALL SGI OR
ANY SGI LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE,
LOSS OF DATA, COMPUTER FAILURE OR MALFUNCTION,
OR ANY AND ALL OTHER COMMERCIAL DAMAGES
OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN
INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS
LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY
FOR DEATH OR PERSONAL INJURY RESULTING FROM SGI’s
NEGLIGENCETOTHE EXTENT APPLICABLE LAW PROHIBITS
SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THAT EXCLUSION AND
LIMITATION MAY NOT APPLYTO RECIPIENT.
Original Code.The Original Code is: [name of software, version number,
and release date], developed by Silicon Graphics, Inc.The Original Code is
Copyright (c) [dates of first publication, as appearing in the Notice in the
Original Code] Silicon Graphics, Inc. Copyright in any portions created by
third parties is as indicated elsewhere herein.All Rights Reserved.
Additional Notice Provisions: [such additional provisions, if any, as appear
in the Notice in the Original Code under the heading “Additional Notice
Provisions”]
11.
Indemnity. Recipient shall be solely responsible for damages arising,
directly or indirectly,out of its utilization of rights under this License.
Recipientwilldefend,indemnifyandholdharmlessSiliconGraphics,Inc.
fromandagainstanyloss,liability,damages,costsorexpenses(including
thepaymentofreasonableattorneysfees)arisingoutofRecipient’suse,
modification,reproductionanddistributionoftheCoveredCodeorout
of any representation or warranty made by Recipient.
12.
13.
U.S. Government End Users.The Covered Code is a “commercial
item” consisting of “commercial computer software” as such
terms are defined in title 48 of the Code of Federal Regulations
and all U.S. Government End Users acquire only the rights set
forth in this License and are subject to the terms of this License.
Miscellaneous. This License represents the complete agreement
concerning the its subject matter. If any provision of this License
is held to be unenforceable, such provision shall be reformed so
as to achieve as nearly as possible the same legal and economic
P&F USA, Inc.
PO Box 2248,Alpharetta, GA 30023-2248
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura,
Huixquilucan Edo. de México
C.P. 52787
Philips and Philips Shield are used under license of
Koninklijke Philips Electronics N.V.
A27F5UH/A27A5UH/A2776UT
HHHHH
|