Philips 27PC4326 User Manual

T3221UB_EN1 4/20/06 9:32 PM Page 1

COLOR ANALOG/DIGITAL TV

27PC4326/37

WITH BUILT-IN VCR AND DVD PLAYER

User Manual

Philips vous remercie de

votre confiance.

Thank you for choosing Philips.

Gracias por escoger Philips.

Need help fast?

Besoin d’une aide

rapide?

Les Guide de mise en route rapide et Manuel de

l’utilisateur regorgent d’astuces destinées à

simplifier l’utilisation de votre produit Philips.

Toutefois, si vous ne parvenez pas à résoudre

votre probléme, vous pouvez accéder à

notre aide en ligne à l’adresse

Necesita ayuda

inmediata?

Lea primero la Guía de inicio rápido o el

Manual del usuario, en donde encontrará

consejos que le ayudarán a disfrutar

plenamente de su producto Philips.

Si después de leerlo aún necesita ayuda,

consulte nuestro servicio de

Read your Quick Start Guide and/or

Owner’s Manual first for quick tips

that make using your Philips product

more enjoyable.

If you have read your instructions

and still need assistance,

you may access our online help at

asistencia en línea en

www.philips.com/usasupport

ou formez le

www.philips.com/usasupport

or call

www.philips.com/usasupport

o llame al teléfono

1-800-661-6162 (Francophone)

1-888-PHILIPS (744-5477) (English speaking)

Veillez à avoir votre produit à

portée de main

1-888-PHILIPS (744-5477)

while with your product

(and Model / Serial number)

1-888-PHILIPS (744-5477)

y tenga a mano el producto

(y número de model / serial)

(et model / serial nombre)

27PC4326

T3221UB_EN1 4/20/06 9:32 PM Page 3

Safety and General Information 3

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

●

1. Read these instructions.

Do not compromise these design standards by applying excessive pull

force to the front, or top, of the cabinet which could ultimately overturn

the product.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

●

Also, do not endanger yourself, or children, by placing electronic

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with

the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or groundingtype

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and third grounding prong. The

wide blade or third prong are provided for your safety. When the pro-

vided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

equipment/toys on the top of the cabinet. Such items could unsuspect-

ingly fall from the top of the set and cause product damage and/or per-

sonal injury.

18. Wall or Ceiling Mounting - The appliance should be mounted to a

wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from power

lines.

20. OutdoorAntenna Grounding - If an outside antenna is connected to

the receiver, be sure the antenna system is grounded so as to provide

some protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70- 1984,

provides information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna dis-

charge unit, size of grounding connectors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements for the

grounding electrode. See Figure below.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12.

Use only with a cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart

is used, use caution when moving the cart/apparatus combina-

tion to avoid injury from tip-over.

21. Object and Liquid Entry - Care should be taken so that objects do not

fall and liquids are not spilled into the enclosure through openings.

a) Warning: To reduce the risk of fire or electric shock, this apparatus

should not be exposed to rain or moisture and objects filled with liq-

uids, such as vases, should not be placed on this apparatus.

22. Battery Usage CAUTION - To prevent battery leakage that may result

in bodily injury, property damage, or damage to the unit:

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-sup-

ply cord or plug is damaged, liquid has been spilled or objects have fall-

en into apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

●

Install all batteries correctly, with + and - aligned as marked on the

unit.

●

Do not mix batteries (old and new or carbon and alkaline, etc.).

●

Remove batteries when the unit is not used for a long time.

15. This product may contain lead and mercury. Disposal of these materials

may be regulated due to environmental considerations. For disposal or

recycling information, please contact your local authorities or the

Electronic Industries Alliance: www.eiae.org

23. Overloading - Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of fire or electric

shock.

24. Object and Liquid Entry - Never push objects of any kind into this

product through openings as they may touch dangerous voltage points

or short-out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the product.

25. Replacement Parts - When replacement parts are required, be sure the

service technician has used replacement parts specified by the manufac-

turer or have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

26. Safety Check - Upon completion of any service or repairs to this prod-

uct, ask the service technician to perform safety checks to determine

that the product is in proper operating condition.

16. Damage Requiring Service - The appliance should be serviced by

qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended interna-

tional global safety standards for tilt and stability properties of its cabi-

net design.

Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as practical.

Example of Antenna Grounding

as per NEC - National Electric Code

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT ^{(NEC SECTION 810-20)}

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ELECTRIC SERVICE EQUIPMENT

T3221UB_EN1 4/20/06 9:32 PM Page 4

4 Safety and General Information (cont’d)

Safety Precautions

● Do not stand the unit up vertically. Install the unit in a horizontal and stable position.

● Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.

Warning:To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

Federal Communications Commission (FCC) Warning:Any unauthorized changes or

modifications to this equipment void the user’s authority to operate it.

Laser Safety: This unit employs a laser. Only a qualified service person should remove the cover or

attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO

NOT STARE INTO BEAM. THE BEAM IS LOCATED INSIDE, NEAR THE DECK MECHANISM.

Special Information for Canadian Users: This Class B digital apparatus complies with Canadian

ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio/TV Interference: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and the receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a crimi-

nal offence.This equipment should not be used for such purposes.

prohibited.“This product incorporates copyright protection technology that is protected by U. S. patents and

other intellectual property rights. Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by

Macrovision. Reverse engineering or disassembly is prohibited.”

Declaration of Conformity

Model Number:

Trade Name:

27PC4326/37

Philips

Responsible Party: Philips Consumer Electronics North America

P.O. Box 671539

Marietta, GA 30006-0026

1-888-PHILIPS (744-5477)

Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

T3221UB_EN1 4/20/06 9:32 PM Page 5

Table of Contents 5

General Information

Disc Features

Safety and General Information . . . . . . . . . . .3-4

DVD Disc Menus, Title Menus . . . . . . . . . . . . .58

Fast Forward/Fast Reverse . . . . . . . . . . . . . . . .59

Chapter/Title/Time Search . . . . . . . . . . . . . . . .60

Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Paused and Step-by-Step Playback, Resume On . . . .62

Repeat, A-B Repeat . . . . . . . . . . . . . . . . . . . . .63

Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Subtitles, Camera Angles . . . . . . . . . . . . . . . . .65

Audio Language, Stereo Sound . . . . . . . . . . . . .66

Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . . .67

Random Playback, Program Playback . . . . . . . . .68

Table of Contents . . . . . . . . . . . . . . . . . . . . . . .5

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Playable Discs andVideotapes . . . . . . . . . . . . . .7

Initial Setup and Use

Before Using theTV/VCR/DVD . . . . . . . . . . . . .8

Hooking Up theTV/VCR/DVD . . . . . . . . . .9-10

Optional Connections . . . . . . . . . . . . . . . . . . .11

Remote Control Buttons . . . . . . . . . . . . . .12-13

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

WatchingTV . . . . . . . . . . . . . . . . . . . . . . . . . .16

Playing aVideotape . . . . . . . . . . . . . . . . . . . . . .17

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . .18

MP3/Windows Media Audio/JPEG Playback . . .69

Dual Playback, Folder Playback . . . . . . . . . . . . .70

On-Screen Displays . . . . . . . . . . . . . . . . . . .71-72

Black Level,Virtual Surround, Initializing . . . . . .73

DVD Setup Features

TV Settings

Language Settings . . . . . . . . . . . . . . . . . . . . .74-75

Display Settings . . . . . . . . . . . . . . . . . . . . . .76-77

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . .78

Parental Settings . . . . . . . . . . . . . . . . . . . . .79-81

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . .82-83

Menu Language, Auto Channel Preset . . . . . . . .19

Adding/Deleting Channels . . . . . . . . . . . . . . . .20

Setting the Clock . . . . . . . . . . . . . . . . . . . .21-24

Daylight-SavingsTime . . . . . . . . . . . . . . . . . . . .25

Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Status Displays . . . . . . . . . . . . . . . . . . . . . .27-28

Picture Controls . . . . . . . . . . . . . . . . . . . . . . .28

InformationYou May Need

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . .85-86

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .87

LimitedWarranty . . . . . . . . . . . . . . . . . . . . . . .88

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Recording

Videotape Recording . . . . . . . . . . . . . . . . . . . .29

One-Touch Recording . . . . . . . . . . . . . . . . . .30

Timer Recording . . . . . . . . . . . . . . . . . . . .31-34

Timer Recording Auto Return . . . . . . . . . . . . .35

Rerecording (Tape Duplication) . . . . . . . . . . . .36

Symbols Used inThis Manual

The following symbols appear in some headings

and notes in this manual.

Videotape Features

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . .37

Rental Playback . . . . . . . . . . . . . . . . . . . . . . . .38

Zero Return, SleepTimer . . . . . . . . . . . . . . . .39

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .40

Index Search . . . . . . . . . . . . . . . . . . . . . . . . . .41

Videotape Playback Features . . . . . . . . . . . . . .42

Automatic Operation Features . . . . . . . . . . . .43

Description refers to playback of DVDs.

Description refers to playback ofVideo CDs.

Description refers to playback ofVideo CDs

without PBC function.

AdditionalTV Features

Closed Captions (TV) . . . . . . . . . . . . . . . . . . .44

Closed Captions (DTV) . . . . . . . . . . . . . .45-47

SettingV-Chip . . . . . . . . . . . . . . . . . . . . . .48-53

Changing the Screen Display Mode (DTV) . . .54

Multi-ChannelTelevision Sound (MTS) . . . .55-57

Description refers to playback of Audio CDs.

Description refers to playback of MP3 discs.

Description refers to playback of

Windows Media Audio CDs.

Description refers to playback of JPEG discs.

T3221UB_EN1 4/20/06 9:32 PM Page 6

6 Introduction

Welcome to yourTV/VCR/DVD Owner’s Manual.

Features -TV/VCR

• Automatic Channel Setup

• Automatic Head Cleaner

• AutomaticTracking Adjustment

• Closed Captions

• Real-TimeVideotape Counter

• Rental Playback

• Repeat Playback

• SleepTimer

• Daylight-SavingsTime

• Timer Recording

• Time Search

• Time Zone Setting

• V-Chip (Parental Controls)

• Zero Return

• English, Spanish or French Setup menus

• Forward/Reverse Searching; Still

• High Quality (HQ) System

• Index Search

• One-Touch Recording

Features - Discs

• Audio Language choices *

• Parental Controls *

• Program Playback

• Bit Rate Display

• Camera Angle *

• Random Playback

• Dolby Digital Sound *

• Dual Playback

• Repeat (A-B, Chapter, Title,Track, Group, Disc)

• Search (Title/Chapter,Time,Track)

• Subtitles *

• Virtual Surround

• Zoom

• Dynamic Range Control

• Fast/Paused/Slow/Step-by-Step Playback

• JPEG Playback

• Markers

• MP3/Windows Media Audio Playback

* If available on the disc

Package Contents

• Remote Control

• Two AAA batteries

• User Manual

• Quick Start Guide

• Registration Card

DVD Disc Menus...

Some explanations in this manual describe DVD Disc menus. DVD manufacturers set the menus, which vary

among DVDs. Not all DVDs have menus. If the DVD has a menu, access it by pressing DISC MENU on the

remote control.

Details are on page 58.

Setup Menus...

Some instructions explain how to use the Setup menus of theTV/VCR/DVD. There are two Setup menus: one

for theTV/VCR features while the unit is inTV/VCR mode, and one for the disc features while the unit is in

DVD mode. Access the Setup menus by pressing SET-UP on the remote control.

While inTV/VCR mode, you can select only the MAIN MENU.

In DVD mode, you can select both the MAIN MENU and the SETUP menu for the unit’s DVD player. Press

SET-UP once to select the MAIN MENU. Press SET-UP twice to get to the DVD player’s SETUP menu.

Even if you set a DVD feature in the unit’s SETUP menu, it will not be available if the current disc does not

include that feature.

Available Disc Features...

All features described in this manual are not available on every disc. If the feature is not available

on the disc, you cannot use theTV/VCR/DVD to make it available.

An “X” will appear in the top right corner of the screen if you try to access a feature that is not

available.

For example, some features are available only during playback, while others are available only if

playback is stopped. If you cannot access a feature, try stopping or starting playback, then try the

feature again.

T3221UB_EN1 4/20/06 9:32 PM Page 7

Playable Discs and Videotapes 7

Playable Discs

The DVD player of this TV/VCR/DVD will play many types of discs, including DigitalVideo Discs (DVDs) and

Audio Compact Discs (CDs). It will play MP3,Windows Media Audio and JPEG files as well.

To play a DVD, make sure it meets the requirements for Region Codes and Color Systems as described

below. Discs that have the following logos will play on the DVD player of this TV/VCR/DVD. Finalize CD-R,

CD-RW, DVD+R and DVD+RW Discs before playing them in the TV/VCR/DVD.

● A disc may not play properly if the disc’s recorded area is less than 55mm across.

●

Do not glue paper or put stickers on to the disc. These may damage the disc, and the TV/VCR/DVD may not read it correctly.

DVD: Prerecorded

DigitalVideo Discs

Video CDs

CD-RW: Compact Disc

Rewritable.

CD-RWs can be

recorded on multiple

times.

Audio CDs

DVD+R: DVD

Recordable. DVD+Rs

can be recorded on

only once.

MP3: Digital audio files

recorded on a CD-R

or CD-RW

DVD+RW: DVD

Rewritable. DVD+RWs

can be recorded on

multiple times.

CD-R: Compact Disc

Recordable.

CD-Rs can be record-

ed on only once.

is a trademark of DVD Format/Logo Licensing Corporation.

Windows Media is a trademark of Microsoft Corporation.

This unit is not compatible with Multiple Bit Rate

(MBR: a file that contains the same content encoded at several different bit rates).

ABOUTTHE PBC FUNCTION OFVIDEO CD

This unit can playVideo CD 1.1 (without PBC) and 2.0 (with PBC).

With version 2.0 (with PBC), you can use interactive menu (e.g., playlists) on theTV screen.

When playing aVideo CD with PBC, some operations cannot be performed unless the PBC function is cancelled

temporarily. See page 58 for more details.

Region Codes

ThisTV/VCR/DVD has a Region One (1) DVD player. DVDs must be labeled for ALL regions or for Region 1 in

order to play on the unit.You cannot play DVDs that are labeled for other regions. Look for the symbols below on

your DVDs. If these region symbols do not appear on your DVD, you cannot play the DVD in thisTV/VCR/DVD.

The number inside the globe refers to a region of the world. Region 1 represents the United States, Canada,

upper regions of North America, Bermuda, the U.S. Virgin Islands, and small regions near Australia.

A DVD labelled for a specific region can only play on DVD players with the same region code.

Color Systems

DVDs are recorded in different color systems throughout the world. The most common color systems are NTSC

(which is used primarily in the United States and North America), PAL, and SECAM.

The DVD player of this unit uses NTSC, so DVDs you play must be recorded in the NTSC color system.You cannot

play DVDs recorded in other formats. The color system of the DVD may be listed on the DVD or on the disc case.

Unacceptable Discs

If you insert an unacceptable type of disc, a Disc Error message may appear on the TV screen. The following

discs will not play on this DVD player.

• CD-ROM

• DVD-RAM

• DVD-ROM

• Compact Disc-Interactive (CD-I)

• Unfinalized discs

• Video Single Disc (VSD)

• DVD-Audio

• DVD contains MP3,Windows Media Audio or JPEG files

• DVD-R or DVD-RW discs recorded inVR format or non-compatible recording mode

On the following disc, the sound may not be heard.

• Super Audio CD - Only the sound on the CD layer can be heard. The sound on the high-density Super

Audio CD layer cannot be heard.

Videotapes

Philips recommends you use only videotapes that have the

mark. Other videotapes may have poor

picture quality and cause excessive deposits on the video heads. The warranty may not cover such damage.

TheVCR of this TV/VCR/DVD has a High Quality (HQ) system and is compatible with existingVideo Home

System (VHS) equipment.

T3221UB_EN1 4/20/06 9:32 PM Page 8

8 Before Using theTV/VCR/DVD

Remote Control Battery Installation

Remove the battery compartment lid on the

bottom of the remote control. Slide the lid down and

off. Follow the direction of the arrow on the lid.

Place two AAA batteries inside the battery

compartment. Align the and ends as indicated.

–

Replace the battery compartment lid.

Battery Safety

Battery Usage CAUTION - To prevent battery leakage that

may result in bodily injury, property damage or damage to the

unit.

● Install ALL batteries correctly, with the + and markings

–

on the battery aligned as indicated on the unit.

● Do not mix batteries, for example, old with new or carbon

with alkaline.

● Remove batteries when the unit will not be used for a long

time.

Recording Prevention

Videotapes have record tabs to ensure you do not erase

recordings accidentally.

To prevent accidental recording, break off the

tab with a screwdriver.

To record again, cover the hole with cellophane

tape.

1 2

Using the Remote Control

Helpful Hint

● Point the remote control at the remote sensor on the

front of the TV/VCR/DVD. Details are on page 14.

● Do not put objects between the remote control and the

TV/VCR/DVD.

• Your new product, its packaging

and this manual contain

materials that can be recycled

and reused. Specialized

companies can recycle your

product to increase the amount

of reusable materials and to

minimize the amount that

needs to be properly disposed.

Your product uses batteries

that should not be thrown

away when depleted but should

be disposed of as small

TV/VCR/DVD Maintenance

● Remove any light adhesive stick-on notes from the video

cassette before putting the cassette in the TV/VCR/DVD.

Removable labels can jam the TV/VCR/DVD.

● The TV/VCR/DVD requires periodic maintenance to

maintain its excellent performance.This TV/VCR/DVD has

an internal head cleaning system. However, the video heads

will eventually require cleaning or replacement. Only an

authorized service center should perform this service.

chemical waste.

Please find out about the local

regulations on disposal of your

old product, batteries, manual

and packaging when you

replace existing equipment.

T3221UB_EN1 5/8/06 6:29 PM Page 9

Hooking Up theTV/VCR/DVD 9

Hook up yourTV/VCR/DVD using

one of the connections shown.

Connect a Cable TV

signal or an antenna to

the ANT.(enna) Jack.

Hooking UpYourTV/VCR/DVD

with a CableTV Signal or

Outdoor Antenna

ANT.

AUDIO OUT

COAXIAL

ANT.

Hooking UpYourTV/VCR/DVD

with a Cable Box/Satellite Receiver

To view any channel, set the TV/VCR/DVD to

the output channel (channel 03 or 04) of the

Cable Box/Satellite Receiver.Then, select

channels at the Cable Box/Satellite Receiver.

Connect the Cable TV

or Satellite signal to the

IN Jack on the Cable

Box/Satellite Receiver.

OUT

Connect an

RF coaxial cable

(not supplied) to

the OUT Jack on

the Cable Box/

Satellite Receiver

and to the

ANT.(enna) Jack

on the

TV/VCR/DVD.

ANT.

AUDIO OUT

COAXIAL

Your Cable Box/Satellite Receiver may have Audio andVideo Out jacks instead of the single

Antenna Out jack (RF coaxial or 75 ohm) shown here.

If so, connect Audio andVideo cables to the Audio/Video Out jacks of the Cable Box/Satellite

Receiver and to the AUDIO/VIDEO In jacks on the front of the TV/VCR/DVD.

Press SELECT on the remote to set the TV/VCR/DVD to AUX, not channel 3 or 4. Select

channels you want to watch or record at the Cable Box/Satellite Receiver as usual, leaving the

TV/VCR/DVD on AUX.

Instructions continue on the next page.

T3221UB_EN1 5/8/06 6:29 PM Page 10

10 Hooking Up theTV/VCR/DVD (cont’d)

Instructions continued from the previous page.

Indoor Antenna

(not supplied,

example only)

Hooking UpYourTV/VCR/DVD

with an Indoor Antenna

To install an indoor antenna or “rabbit ears”

(not supplied), connect the antenna wire to the

ANT.(enna) Jack on the back of the

TV/VCR/DVD as shown. Extend the antenna

and adjust its length, direction and angle for the

clearest picture.

ANT.

AUDIO OUT

COAXIAL

Hooking UpYourTV/VCR/DVD to

AnotherVideo Source

(VCR, DVD player, Camcorder, etc.)

You may need this connection if you want to

play discs or tapes on other equipment but

watch them on the TV/VCR/DVD. Press

SELECT on the remote to select AUX at the

TV/VCR/DVD. When you play the materials on

the other equipment, it will show on the

TV/VCR/DVD’s AUX channel. More details are

on page 36.

Audio and video cables are not supplied.

Connect audio cables to the

AUDIO/VIDEO OUT Jacks

onVCR (example only)

AUDIO OUT Jacks on the

VCR and to the red and

white AUDIO In Jacks on the

front of the TV/VCR/DVD.

HEADPHONE VIDEO

3CH

4CH

AUDIO VIDEO

ANT.

OUT

L - AUDIO - R

STANDBY-ON

SOURCE

VOLUME

PLAY

STOP

OPEN/CLOSE

CHANNEL

REC/OTR

REW

PLAY

F.FWD

STOP/EJECT

AUDIO

DVD

VCR/TV

3CH

AUDIO/VIDEO IN Jacks

on front of TV/VCR/DVD

4CH

AUDIO VIDEO

ANT.

OUT

Connect aVideo cable to the

VIDEO OUT Jack on theVCR and

to the yellowVIDEO In Jack on

the front of the TV/VCR/DVD.

When all other connections are

complete, plug in the

TV/VCR/DVD’s power cord.

T3221UB_EN1 5/8/06 6:29 PM Page 11

Optional Connections 11

Digital Stereo Hookups

You can connect the TV/VCR/DVD to a Stereo

that has a Digital Coaxial In jack. Use this

hookup if you want to hear the TV/VCR/DVD

sound through the Stereo instead. Use these

connections for a Dolby Digital-compatible

Stereo or for a Receiver that has a Mini-Disc or

Digital Audio Tape deck.

To AUDIO OUT

COAXIAL jack

on TV/VCR/DVD

ANT.

AUDIO OUT

COAXIAL

Connect the antenna/CableTV

signal. Details are on pages 9-10.

AUDIO OUT

COAXIAL

Connect a digital audio coaxial

cable (not supplied) to the AUDIO

OUT COAXIAL jack on the

TV/VCR/DVD.

Also connect the cable to the

Stereo’s COAXIAL DIGITAL

AUDIO IN jack.

To Stereo’s

COAXIAL DIGITAL AUDIO IN jack

If the Stereo is Dolby

Digital-compatible, set DOLBY

DIGITAL to BITSTREAM. If the

Stereo is not Dolby Digital-compatible

or if you connected to a Mini-Disc or

Digital Audio Tape Deck, set DOLBY

DIGITAL to PCM. Details are on page 78.

An incorrect setting causes noise

distortion and damages speakers.

Helpful Hints

• You cannot use a Mini-Disc or

Digital Audio Tape deck to

copy Dolby Digital

Multi-channel surround sound

discs.

• If the disc is not recorded in

Dolby Digital Multi-channel

surround sound, you will not

hear multi-channel sound even

if you use the Digital Stereo

hookup.

• To see if your disc is recorded

in Dolby Digital, look for a

Dolby Digital logo on disc or

on its case.

• To see if your Stereo has

Dolby Digital, look for a Dolby

Digital logo on your Stereo.

Or, refer to the Stereo

owner’s manual.

T3221UB_EN1 4/20/06 9:32 PM Page 12

12 Remote Control Buttons

STANDBY-ONy Button

Press to turn on or off the

TV/VCR/DVD.

OPEN/CLOSE A Button

Press to open or close the disc

tray. Details are on page 18.

REC MODE Button

Press to choose a tape recording

speed (SP or SLP).

Details are on page 29.

PLAY B Button

STANDBY-ON

OPEN/CLOSE

Press to start playing a disc or video

cassette. Details are on pages 17-18.

REC I Button

Press once to start a recording on

videotape. Details are on page 29.

STOP C Button

Press to stop disc or videotape

playback.

PAUSE k Button

Press to pause videotape recording.

Press again to resume recording.

Details are on page 29.

Press to pause videotape or DVD

playback. Press repeatedly to

advance the picture one frame at a

time. Details are on pages 42 and 62.

Arrow Buttons

Use the Arrow buttons to select

or adjust menu items.

DISC MENU Button

Press to access DVD Disc menus.

Details are on page 58.

ENTER

X Y

VOL. (volume)

Buttons

PICTURE/SLEEP Button

Press to set the Sleep Timer.

Details are on page 39.

Press to adjust the volume.

Press to access the picture

controls. Details are on page 28.

CH. (channel) K/L Buttons

Press to select memorized TV

channels.

SELECT Button

Press to select TV/VCR or DVD

mode. (TV/VCR mode includes

Analog TV, Digital TV or AUX mode.)

The corresponding light (VCR/TV or

DVD) will appear on the front of the

TV/VCR/DVD to indicate which

mode is active. Details are on page 14.

To put the unit into theVCR mode,

press PLAY B (VCR) when in any

mode other than DVD.

Details are on page 16.

When the TV/VCR/DVD switches

from analog to digital, it may take a

while until the digital channel

selection is completed.

T3221UB_EN1 4/20/06 9:32 PM Page 13

Remote Control Buttons (cont’d) 13

CLEAR Button

Number Buttons

Press to reset or erase a setting or

wrong information.

TV/VCR Mode: Press two digits to

access a specific channel. Press 0

before the number of a single-digit

channel. Details are on page 16.

+100/+10 button:To select channels

100 or higher, press +100/+10, then

the Number buttons of the last 2

digits of the channel number.

DTV Mode: Press to select the

major or the minor channel.

In TV mode, press once to display the

tape counter. Press it twice to reset

the counter to 0:00:00.

Details are on page 39.

Press to cancel a Timer Recording.

Details are on page 34.

j/h Button

During disc playback;

DVD Mode: Use the Number

buttons to enter a track or chapter

number.

+100/+10 button: Press before

entering double-digit numbers. For

example, to select chapter 16, press

+100/+10, then 1, 6.

STANDBY-ON

OPEN/CLOSE

- Press briefly to skip to the beginning

of the current track/chapter.

- Press repeatedly to skip to previous

tracks/chapters.

Details are on page 61.

- Press and hold for a few seconds to

search backward.

Details are on page 59.

i/g Button

- Use this button in combination with

PAUSE k to start the Slow Motion

Playback.

Details are on page 42 for videotape

playback, and on page 67 for disc

playback.

During disc playback;

- Press briefly to skip to the next

track or chapter.

Details are on page 61.

- Press and hold for 2 seconds to

search forward.

Details are on page 59.

- Use this button in combination with

PAUSE k to start the Slow Motion

Playback.

- Press to reverse a videotape.

Details are on page 42.

RETURN Button

Press to go to the previous Setup

menu. Press to remove On-Screen

Displays.

Details are on page 42 for videotape

playback, and on page 67 for disc

playback.

- Press to forward the videotape.

Details are on page 42.

ENTER

MODE Button

Press to access the settings listed

below:

TITLE Button

Press to access a DVD’s Title menu if

available. Details are on page 58.

- Audio setting

Details are on pages 56-57 and 66.

- Search setting

Details are on pages 60 and 61.

- Repeat setting

Details are on page 63.

- A-B Repeat setting

Details are on page 63.

- Subtitle setting

Details are on page 65.

- Camera Angle setting

Details are on page 65.

- Zoom setting

ENTER Button

Press to accept or change a menu

setting.

SET-UP Button

Press to access or remove the

TV/VCR/DVD’s Setup menu.

MUTE Button

Press to mute or restore the sound.

Details are on page 67.

- Black Level setting

Details are on page 73.

- Virtual Surround setting

Details are on page 73.

- Random Playback setting

Details are on page 68.

- Program Playback setting

Details are on page 68.

- Folder playback setting.

Details are on page 70.

DISPLAY Button

TV/VCR Mode: Press to see the

videotape counter, channel or time

on the screen. Details are on page 27.

DTV Mode: Press to display channel

information. Details are on pages 27-28.

DVD Mode: Press to see the disc

status on the screen. Details are on

page 71.

• Some settings are not available in

specific modes.

T3221UB_EN1 4/20/06 9:32 PM Page 14

14 Front Panel

Front design varies slightly among models.

Cassette Compartment

Insert a videotape here.

DiscTray

Insert a disc here.

CHANNEL K/L Buttons

Press to select TV channels.

Details are on page 16.

OPEN/CLOSE A Button (DVD)

Press to open or close the disc tray.

Details are on page 18.

STOP C Button (DVD)

Press to stop disc playback.

Details are on page 18.

STANDBY-ON

SOURCE

VOLUME

PLAY

STOP

OPEN/CLOSE

CHANNEL

REC/OTR

REW

PLAY

F.FWD

STOP/EJECT

AUDIO

DVD

VCR/TV

PLAY B Button (DVD)

Press to start disc playback.

Details are on page 18.

STANDBY-ON

VOLUME

PLAY NEXT

STOP

OPEN/CLOSE

SOURCE

CHANNEL

REC/OTR

REW

PLAY

FWD

STOP/EJECT

HEADPHONE VIDEO

AUDIO

DVD

VCR/TV

STANDBY-ONy Button

STOP/EJECT CA

Press to turn the TV/VCR/DVD on or

off. Turn off the TV/VCR/DVD for a

timer recording.

Button (VCR)

Press to stop tape playback.

Press while playback is

stopped to remove the

tape.

FWD D Button (VCR)

Press to fast forward the

tape or to search forward

quickly during playback.

Details are on page 42.

PLAY B Button (VCR)

Press to start tape playback.

Details are on page 17.

VIDEO and AUDIO L/R

(left/right) In jacks

Use audio and video cables

to connect these jacks to

the Audio andVideo Out

jacks of a Camcorder, DVD

player orVCR.This lets you

watch materials playing on

the other equipment when

you choose AUX at the

TV/VCR/DVD. Details are on

pages 10 and 36.

VOLUME K/L Buttons

Press to adjust the volume.

PREV H,

NEXTi Buttons (DVD)

Press to go to a different chapter or

track. Details are on page 61.

DVD light (green)

Appears if the TV/VCR/DVD is in DVD

mode.

SOURCE Button

Press to select TV/VCR or DVD mode.

(TV/VCR mode includes Analog TV,

Digital TV or AUX mode.) If you switch

to TV/VCR mode, wait about 4 seconds

before switching back to DVD mode.

This button works the same as the

SELECT button on the remote.

VCR/TV light (red)

Appears if the TV/VCR/DVD is in

TV/VCR mode.

REC/OTR light (red)

This light flashes during recording. It

lights when the TV/VCR/DVD is in

standby mode (power off) for a timer

recording.

REC/OTR I Button (VCR)

Press to start a videotape recording.

Details are on page 29.

HEADPHONE jack

Connect headphones (not

supplied) here for personal

listening.

Remote Sensor

Press repeatedly to start a One-Touch

Recording. Details are on page 30.

REW E Button (VCR)

Press to rewind the tape or to search

backward quickly during playback.

Details are on page 42.

Receives a signal from your

remote control so you can

operate the TV/VCR/DVD

from a distance.

T3221UB_EN1 5/8/06 6:29 PM Page 15

Rear Panel 15

ANT.

AUDIO OUT

COAXIAL

ANT. Jack

(Antenna In)

Connect an antenna or Cable TV signal here. This brings TV

channels to the TV/VCR/DVD. If you do not connect an antenna

or Cable TV signal to the TV/VCR/DVD (or connect to a Cable

Box/Satellite Receiver through this jack), you will not receive any

TV channels. Details are on pages 9-10.

Power Cord

Connect to a standard AC outlet (120V/60Hz).

AUDIO OUT COAXIAL Jack

Connect this jack to a Digital Stereo using a digital audio coaxial

cable (not supplied). Use this connection if the Stereo has Dolby

Digital compatibility and has a Digital Coaxial Audio In jack. You

may also use this connection when connecting the TV/VCR/DVD

to a Mini-Disc or Digital Audio Tape deck. Details are on page 11.

T3221UB_EN1 4/20/06 9:32 PM Page 16

16 WatchingTV

The unit selects available TV channels automatically when you

connect an Antenna or Cable TV signal to it. To reset TV

channels, see page 20.

If you are using a Cable Box or Satellite Receiver, you do not

need to set channels at the TV/VCR/DVD.

STANDBY-ON

OPEN/CLOSE

Press STANDBY-ONy to turn on the

CLEAR

+100

+10

TV/VCR/DVD.

REC MODE

REC

PLAY

To watchTV, press CH. ▲/▼ to select

STOP

SLOW

PAUSE

TITLE

memorized channels. Memorized channels are

RETURN

those that appear when you flip through channels. If a

channel is skipped, you still can use the Number

buttons to select it. This is a non-memorized channel;

it may have weak reception in your area.

To update your memorized and non-memorized

channels, see page 19.

ENTER

DISC

SET-UP

Remember, if you are using a Cable Box/Satellite

Receiver, set the TV/VCR/DVD to channel 3, 4 or

AUX. Change channels at the Cable Box/Satellite

Receiver.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

X Y

PressVOL.

to adjust the volume.

VOLUME 20

Channel Selection

● To select the memorized channels, press CH. ▲/▼ or the

Number buttons.

● The deleted channels can only be selected with the

Number buttons.

● When selecting the channels with CH. ▲/▼, the major

channel selection will be followed by the minor channel

selection.

● When selecting the channels with the Number buttons, enter

the major channel number followed by the minor channel

number. For example, if the channel you want to select is

12 (major)-3 (minor), press 1

→

3. (You must press

0 first when entering a single digit channel number.)

T3221UB_EN1 4/20/06 9:32 PM Page 17

Playing a Videotape 17

Follow these steps to simply play a videotape. Videotape

playback options are on pages 37-43.

STANDBY-ON

OPEN/CLOSE

Insert a videotape in the cassette

compartment of theTV/VCR/DVD. The power

will come on. If the tape’s record tab is missing,

playback should start automatically.

CLEAR

+100

+10

If playback does not start automatically, press

PLAY B to start playback.

REC MODE

REC

PLAY

Press STOP C to stop playback.

STOP

SLOW

PAUSE

TITLE

2-4

RETURN

Press H/h to rewind the tape.

Press G/g to fast forward the tape.

ENTER

C A

Press STOP/EJECT

on the front of the

DISC

SET-UP

TV/VCR/DVD to remove the tape.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Helpful Hints

• If the tape you want to play is

already in the TV/VCR/DVD,

turn on the power. Press

SELECT to choose TV/VCR

mode (the redVCR/TV light

will be on), then press

PLAY B.

• When you play an S-VHS

format tape, you cannot get

the high resolution that would

be available on an S-VHSVCR.

Noise lines (black and white

streaks) may appear in the

picture.

• If you press SELECT while

playing a videotape, playback

will stop and the unit will

switch to DVD mode. This will

happen also if you press

PLAY B (DVD) or

OPEN/CLOSE A (DVD)

during videotape playback.

T3221UB_EN1 4/20/06 9:32 PM Page 18

18 Playing a Disc

Before you begin, turn on the power of other equipment

connected to the TV/VCR/DVD. Set a stereo (if applicable) to

the correct sound source or channel. Details are on page 11.

STANDBY-ON

OPEN/CLOSE

Press STANDBY-ONy to turn on the

TV/VCR/DVD. The unit will be in TV/VCR mode.The

redVCR/TV light will be on.

CLEAR

+100

+10

Press SELECT repeatedly to put the

REC MODE

REC

TV/VCR/DVD in DVD mode. The green DVD light

will appear on the front of the TV/VCR/DVD.

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

Press OPEN/CLOSE A.

ENTER

Place a disc into the tray.

Some DVDs are recorded on both sides. Make sure the

DISC

SET-UP

VOL.

label of the side you want to play is facing up.

Or, if the DVD is recorded on only one side, place the

disc in the tray with the label facing up and the shiny

side facing down.

PICTURE

/SLEEP

CH.

SELECT

Helpful Hints

•

Even if you turn off the unit in

DVD mode, if you turn it on

again with the STANDBY-ONy

button, it will be in TV/VCR

mode. If the unit was shut down

by unplugging the power cord

or due to a power failure, it will

be in DVD mode when you

turn it on again.

Press PLAY B. The tray will close and playback will

begin. If playback does not start automatically, press

PLAY B again.

• An ‘’X” will appear on the

screen when you try to access

a feature that is not available.

This is not a problem with the

TV/VCR/DVD.

If a DVD menu appears instead, see page 58.

To play MP3,Windows Media Audio or JPEG files,

see page 69.

You also can close the tray by pressing

OPEN/CLOSE A.

•

If a disc is dirty or scratched,

the picture may be distorted or

playback may stop. Remove the

disc and try a different one.

Press STOP C to stop playback. If playback remains

stopped for 5 minutes, the DVD screen will dim. If

• Pressing OPEN/CLOSE

(DVD) or PLAY B (DVD) will

turn on the unit in DVD mode

(not TV/VCR mode).

If a disc has multiple layers, the

picture may freeze occasionally.

This happens when the first

layer switches to the second

layer. This is not a malfunction.

playback is stopped for 20 minutes with no activity at

the TV/VCR/DVD, the unit will turn off.

•

• Pressing SELECT during disc

playback stops disc playback

and switches the unit to

TV/VCR mode. Pressing

PLAY B (VCR) on the front

of the unit during disc

REMINDER: Only certain discs will play.

See page 7 for details.

playback stops disc playback

and starts tape playback.

T3221UB_EN1 4/20/06 9:32 PM Page 19

TV/VCR/DTV

Menu Language,Auto Channel Preset 19

PLAY

Menu Language

This affects the language of the TV/VCR/DVD’s Setup menus

and On-Screen Display terms. This does not alter the language

of TV programming, videotapes, discs or closed captioning.

STOP

SLOW

PAUSE

RETURN

TITLE

Press SET-UP.

2-3

ENTER

DISC

SET-UP

Press ▲ or ▼ to select LANGUAGE.

InTV/DTV/AUX Mode

1,4

In DVD Mode

– MAIN MENU –

PICTURE

/SLEEP

CH.

VOL.

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

TIMER PROGRAMMING

SETTING CLOCK

USER'S SET UP

B LANGUAGE [ENGLISH]

ZERO RETURN

V-CHIP SET UP

B LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

PLAY

TIME SEARCH

INDEX SEARCH

STOP

SLOW

PAUSE

TITLE

DTV SET UP

RETURN

DTV SET UP will show only in

DTV Mode.

2-3

Press ENTER repeatedly to select ENGLISH,

ESPAÑOL or FRANÇAIS. The selected language

will appear inside the [ ].

This will be the language of the TV/VCR/DVD Setup

menus in both TV/VCR and DVD modes.

ENTER

DISC

SET-UP

VOL.

PICTURE

/SLEEP

CH.

Press SET-UP to exit the menu.

Helpful Hints

Auto Channel Preset

•

The TV/VCR/DVD cannot change

channels at the Cable Box or Satellite

Receiver. Set the TV/VCR/DVD to 3,

4 or AUX. Change channels at the

Cable Box/Satellite Receiver.

• Channel settings will be saved

even if the power fails.

To automatically preset only the channels which are available

in your area, follow the steps below.

● Before you begin, put the TV/VCR/DVD in TV/VCR mode.

Press SELECT so the redVCR/TV light appears on the

front of the TV/VCR/DVD.

Press SET-UP.

• If you have Spanish or French

menus and need English, press

SET-UP. Press ▲ or ▼ to select

IDIOMA or LANGAGE. Press

ENTER to select ENGLISH. Press

SET-UP to remove the menu.

• You cannot reset TV channels

when the unit is in DVD mode.

• If you press STANDBY-ONy or

SET-UP during scanning, the

Press ▲ or ▼ to select CHANNEL SET UP.

Then, press ENTER.

– MAIN MENU –

TIMER PROGRAMMING

SETTING CLOCK

B CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

AUTO PRESET will be canceled.

INDEX SEARCH

DTV SET UP

•

With regard only to the digital CH,

even after the scanning is complete if

you unplug the AC power cord

before turning off the unit by

DTV SET UP will show only in

DTV Mode.

Press ▲ or ▼ to select your desired preset type.

pressing STANDBY-ONy, the AUTO

PRESET CH memory may be lost.

• If there is no TV signal input,“NO

TV SIGNALS” will appear on the

display after the completion of

channel scanning.

• If you selected AUTO PRESET

CH (TV/DTV), when the scanning

and memorizing are completed,

the memorized smallest channel

in the analog broadcasting will be

displayed. If no analog channel is

memorized, the memorized

Press ENTER.

InTV Mode

In DTV Mode

– CHANNEL SET UP –

ADD / DELETE CH

– CHANNEL SET UP –

ADD / DELETE CH (DTV)

B AUTO PRESET CH ( TV

)

B AUTO PRESET CH (DTV)

AUTO PRESET CH (TV/DTV)

AUTO PRESET CH (CATV)

! CATV takes approx. 50min.

AUTO PRESET CH (CATV)

AUTO PRESET CH (TV/DTV)

AUTO PRESET CH (CATV)

! CATV takes approx. 50min.

Auto scanning will start.

When scanning is complete, the TV/VCR/DVD will go

to the lowest available channel. Use CH. ▲/▼ to scan

memorized channels. You can select non-memorized

channels with the Number buttons.

smallest channel in the digital

broadcasting will be displayed.

T3221UB_EN1 4/20/06 9:32 PM Page 20

TV/VCR/DTV

20 Adding/Deleting Channels

You can delete TV channels you no longer receive or seldom

watch. Or, you can add more channels if the TV/VCR/DVD

did not memorize all your favorite channels.

● Before you begin, press SELECT to put the

TV/VCR/DVD inTV/VCR mode. The redVCR/TV

light will appear.

STANDBY-ON

OPEN/CLOSE

Press SET-UP.

CLEAR

+100

+10

REC MODE

REC

Press ▲ or ▼ to select CHANNEL SET UP.

Then, press ENTER.

PLAY

– MAIN MENU –

TIMER PROGRAMMING

SETTING CLOCK

B CHANNEL SET UP

USER'S SET UP

STOP

SLOW

PAUSE

TITLE

RETURN

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

2-5

INDEX SEARCH

DTV SET UP

ENTER

DTV SET UP will show only in

DTV Mode.

DISC

SET-UP

1,6

Press ▲ or ▼ to select ADD/DELETE CH.Then,

PICTURE

/SLEEP

CH.

VOL.

press ENTER.

InTV Mode

In DTV Mode

SELECT

MODE

– CHANNEL SET UP –

MUTE

DISPLAY

B ADD / DELETE CH

B ADD / DELETE CH (DTV)

AUTO PRESET CH ( TV

)

AUTO PRESET CH (DTV)

AUTO PRESET CH (TV/DTV)

AUTO PRESET CH (CATV)

! CATV takes approx. 50min.

AUTO PRESET CH (CATV)

AUTO PRESET CH (TV/DTV)

AUTO PRESET CH (CATV)

! CATV takes approx. 50min.

The menu will disappear and a channel number will

appear, along with ADD/DELETE.The broadcast being

received will show in the background.

ADD

ADD / DELETE

Use the Number buttons to select the channel

you wish to add or delete. To select the channel to

add, you also can use ▲ or ▼, or CH. ▲/▼.

Press ENTER to select ADD or DELETE.

Color of channel numbers displayed at the right top of

the screen indicates the following;

Blue/Green:The selected channel will be added.

Pink/Red:The selected channel will be deleted.

To add or delete another channel, repeat steps 4-5.

Helpful Hints

• If you connected an Antenna

to the TV/VCR/DVD, channels

2-69 will be available to add or

delete. If you connected to

Cable TV, channels 1-125 will

be available.

• This function will not operate

when the unit is in DVD

mode.

Press SET-UP when you are finished.

• In the digital mode (DTV), you

can add or delete channels

only for major channel.

• Once you delete a DTV

channel, you cannot add the

channel again without

Major Channel/Minor Channel

In the DTV broadcasting, one channel may consist of one

main channel and multiple sub-channels depending on the

airtime. In this case, the main channel is called major

channel and the sub-channel is called minor channel.

performing Auto Channel

Preset. See page 19.

On how to select channel, see Channel Selection on page 16.

T3221UB_EN1 4/20/06 9:32 PM Page 21

TV/VCR/DTV

Setting the Clock 21

Manual Clock Setting

STANDBY-ON

OPEN/CLOSE

You must set the clock before you can do a timer recording.

Set the clock manually. Afterward, use Auto Clock to monitor

the time. Details are on pages 23-24.

If you do not receive a PBS station that carries time signals,

you cannot use Auto Clock. Set AUTO CLOCK to OFF. The

time will remain as you set it manually.

CLEAR

+100

+10

Press SET-UP.

REC MODE

REC

PLAY

STOP

SLOW

PAUSE

TITLE

Press ▲ or ▼ to select SETTING CLOCK.

RETURN

Then, press ENTER.

InTV/DTV/AUX Mode

In DVD Mode

2-4

– MAIN MENU –

ENTER

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

TIMER PROGRAMMING

B SETTING CLOCK

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

DISC

SET-UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

PICTURE

/SLEEP

CH.

VOL.

DTV SET UP

SELECT

MODE

DTV SET UP will show only in

DTV Mode.

MUTE

DISPLAY

Press ▲ or ▼ to select MANUAL CLOCK SET.

Then, press ENTER.

– SETTING CLOCK –

AUTO CLOCK

AUTO CLOCK CH SEARCH

AUTO CLOCK CH 02]

B MANUAL CLOCK SET

[ON]

[

D.S.T.

[OFF]

TIME ZONE

[OFF]

While the MONTH space is flashing, press

▲ or ▼ until the correct month appears.

Then, press B.

– MANUAL CLOCK SET –

MONTH DAY

05 - - - - - - - - -

HOUR MINUTE

- - - - - -

YEAR

Likewise, set the DAY, YEAR and HOUR.

Instructions continue on the next page.

T3221UB_EN1 4/20/06 9:32 PM Page 22

TV/VCR/DTV

22 Setting the Clock (cont’d)

Instructions continued from the previous page.

STANDBY-ON

OPEN/CLOSE

Finally, set the MINUTE with ▲ or ▼.Then

press SET-UP.

– MANUAL CLOCK SET –

MONTH DAY

YEAR

05 FRI 2006

HOUR MINUTE

CLEAR

+100

+10

40 PM

REC MODE

REC

PLAY

Although seconds are not displayed, they begin

counting from 0 when you press SET-UP. Use this

action to synchronize the clock exactly.

Press DISPLAY to see the current time on the screen.

Details are on page 27.

STOP

SLOW

PAUSE

TITLE

RETURN

ENTER

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Helpful Hints

• You may have to reset the

clock after a power failure.

• To adjust the clock later,

follow steps 1-3 on page 21.

Then press s or B to select

the item you want to change.

Enter the correct information

by pressing ▲ or ▼. Press

SET-UP when you are finished.

T3221UB_EN1 4/20/06 9:32 PM Page 23

TV/VCR/DTV

Setting the Clock (cont’d) 23

Auto Clock Setting

STANDBY-ON

OPEN/CLOSE

You can have the TV/VCR/DVD adjust the clock using your

PBS channel. Once you set the clock manually, the

TV/VCR/DVD will monitor the correct time and date

broadcast by the PBS station.

Before you begin ...

● Turn on the TV/VCR/DVD power.

CLEAR

+100

+10

● Connect the antenna/Cable TV signal.

Details are on pages 9-10.

● Turn on the Cable Box/Satellite Receiver (if applicable).

● Set up the TV channels. Details are on pages 19-20.

● Set the clock manually. Details are on pages 21-22.

● Press SELECT to put theTV/VCR/DVD inTV/VCR

mode. The redVCR/TV light will appear.

REC MODE

REC

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

2-3

ENTER

DISC

SET-UP

Press SET-UP.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

Press ▲ or ▼ to select SETTING CLOCK.

MUTE

DISPLAY

Press ENTER.

InTV/DTV/AUX Mode

In DVD Mode

– MAIN MENU –

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

TIMER PROGRAMMING

B SETTING CLOCK

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

DTV SET UP

DTV SET UP will show only in

DTV Mode.

Confirm AUTO CLOCK is ON. If not, press

ENTER to select ON.

– SETTING CLOCK –

B AUTO CLOCK

AUTO CLOCK CH SEARCH

AUTO CLOCK CH 02]

MANUAL CLOCK SET

[ON]

[

D.S.T.

[OFF]

TIME ZONE

[OFF]

Instructions continue on the next page.

T3221UB_EN1 4/20/06 9:32 PM Page 24

TV/VCR/DTV

24 Setting the Clock (cont’d)

Instructions continued from the previous page.

STANDBY-ON

OPEN/CLOSE

If you already know your PBS channel number,

skip ahead to step 8. If you do not know the

channel number of your PBS station, press ▼ to

select AUTO CLOCK CH SEARCH. Then press

ENTER.

CLEAR

+100

+10

– SETTING CLOCK –

AUTO CLOCK

B AUTO CLOCK CH SEARCH

AUTO CLOCK CH 02]

MANUAL CLOCK SET

[ON]

REC MODE

REC

[

D.S.T.

TIME ZONE

[OFF]

PLAY

[OFF]

STOP

SLOW

PAUSE

TITLE

RETURN

● The TV/DVD/VCR will search for a channel that

carries a time signal. Channels that carry the time

will appear at the top of the screen. Use one of

these channels when you enter your AUTO

CLOCK CH at step 9.

ENTER

7-9

DISC

SET-UP

5-6,

This may take several minutes. An ‘’_ _” appears in

PICTURE

/SLEEP

the lower left corner of the screen when the search

is complete.

CH.

VOL.

SELECT

MODE

– AUTO CLOCK CH SEARCH –

08 10 13

MUTE

DISPLAY

– –

Press SET-UP to remove the AUTO CLOCK

CH SEARCH screen.

Press SET-UP to access the menu again.

Press ▲ or ▼ to select SETTING CLOCK.

Then, press ENTER.

Press ▲ or ▼ to select AUTO CLOCK CH,

then press ENTER.

Helpful Hints

• During the Auto Clock

Channel Search, the picture

may be distorted. This is

normal.

– SETTING CLOCK –

AUTO CLOCK

AUTO CLOCK CH SEARCH

B AUTO CLOCK CH

02]

MANUAL CLOCK SET

[ON]

[

D.S.T.

[OFF]

TIME ZONE

[OFF]

• If there are no PBS stations

available, set AUTO CLOCK

to OFF. Set the clock manually.

• If the TV/VCR/DVD is

connected to a Cable Box or

Satellite Receiver, select the

local PBS station on the Cable

Box/Satellite Receiver. Set the

TV/VCR/DVD to the output

channel of the Cable

Press { or B until the channel number of your

PBS station appears. Use one of the channel

number you found at step 4.

Press SET-UP to remove the menu.

Box/Satellite Receiver (03, 04

or AUX).

Press STANDBY-ONy to turn off the

TV/VCR/DVD and let the PBS channel update

the clock.

T3221UB_EN1 4/20/06 9:32 PM Page 25

TV/VCR/DTV

Daylight-SavingsTime 25

When Daylight-Savings Time (D.S.T.) is ON, the clock will

move forward 1 hour on the first Sunday in April and move

back 1 hour on the last Sunday in October.

To turn Daylight-Savings Time ON or OFF, follow the steps

below.

STANDBY-ON

OPEN/CLOSE

Press SET-UP.

CLEAR

+100

+10

REC MODE

REC

Press ▲ or ▼ to select SETTING CLOCK.

PLAY

Then, press ENTER.

STOP

SLOW

PAUSE

TITLE

InTV/DTV/AUX Mode

In DVD Mode

RETURN

– MAIN MENU –

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

TIMER PROGRAMMING

B SETTING CLOCK

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

2-3

V-CHIP SET UP

ENTER

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

DISC

SET-UP

TIME SEARCH

INDEX SEARCH

DTV SET UP

1,4

DTV SET UP will show only in

DTV Mode.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

Press ▲ or ▼ to select D.S.T. Then, press

ENTER until ON appears beside D.S.T. Or, press

ENTER so OFF appears beside D.S.T. if you want to

disable this feature.

MUTE

DISPLAY

– SETTING CLOCK –

AUTO CLOCK

AUTO CLOCK CH SEARCH

AUTO CLOCK CH 02]

MANUAL CLOCK SET

[ON]

[

B D.S.T.

TIME ZONE

[ON]

[ALASKA]

Press SET-UP to remove the menu.

T3221UB_EN1 4/20/06 9:32 PM Page 26

TV/VCR/DTV

26 Time Zone

You must select the time zone of your area to ensure the

proper performance of the clock.

STANDBY-ON

OPEN/CLOSE

Press SET-UP.

Press ▲ or ▼ to select SETTING CLOCK.

Then press ENTER.

CLEAR

+100

+10

REC MODE

REC

InTV/DTV/AUX Mode

In DVD Mode

– MAIN MENU –

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

PLAY

TIMER PROGRAMMING

B SETTING CLOCK

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

STOP

SLOW

PAUSE

TITLE

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

RETURN

TIME SEARCH

INDEX SEARCH

DTV SET UP

2-4

ENTER

DTV SET UP will show only in

DTV Mode.

DISC

SET-UP

1,5

Using ▲ or ▼ , selectTIME ZONE.

PICTURE

/SLEEP

– SETTING CLOCK –

CH.

VOL.

AUTO CLOCK

AUTO CLOCK CH SEARCH

AUTO CLOCK CH 02]

MANUAL CLOCK SET

[ON]

SELECT

MODE

[

MUTE

D.S.T.

[OFF]

DISPLAY

B TIME ZONE

[OFF]

Everytime you press ENTER, theTIME ZONE

will switch as below.

[OFF]

[ALASKA]

[HAWAII]

[PACIFIC]

[MOUNTAIN]

[CENTRAL]

[EASTERN]

[ATLANTIC]

Helpful Hint

• Based on the world standard

time information acquired

from digital broadcasting, the

time difference will be

To exit the menu, press SET-UP.

adjusted as below.

OFF

0 hour

-9 hours

-10 hours

-8 hours

-7 hours

-6 hours

-5 hours

-4 hours

ALASKA

HAWAII

PACIFIC

MOUNTAIN

CENTRAL

EASTERN

ATLANTIC

T3221UB_EN1 4/20/06 9:32 PM Page 27

TV/VCR/DTV

Status Displays 27

Status Displays

STANDBY-ON

OPEN/CLOSE

To see theVideotape Counter, Clock or Channel number on

the screen in TV/VCR mode, press DISPLAY repeatedly.

The following will occur when Closed Captions are OFF.

Press DISPLAY once to see theVideotape

counter. After 5 seconds, only the counter will

remain on the screen.

CLEAR

+100

+10

STOP

REC MODE

REC

PLAY

STOP

SLOW

PAUSE

TITLE

COUNT 0:12:34

COUNT 0:12:39

RETURN

Press DISPLAY again to see the current time

andTV channel. After 5 seconds, only the clock and

channel number will remain on the screen. To clear

them, press DISPLAY again.

ENTER

DISC

SET-UP

STOP

5:40 PM

CH 2

5:40 PM

CH 2

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

1-2

MUTE

DISPLAY

● If you press DISPLAY when Closed Captions are ON,

all the status information will appear for 5 seconds. After

5 seconds, they will clear from the screen. Closed Caption

details are on pages 44-47.

In the digital mode, the detailed information for the currently

selected channel such as the program guide is displayed.

Every time you press DISPLAY, the display

mode will be switched as below.

[DISPLAY OFF]

[INFO1]

[INFO2]

[ALL STATUS]

Helpful Hints

• When the program guide is

displayed in more than 6 lines,

use ENTER or RETURN and

scroll for reading.

• “No description provided.” is

displayed when the program

guide is not provided.

• While the information is

displayed in the INFO2 mode,

the Closed Caption function is

interrupted.

Instructions continue on the next page.

T3221UB_EN1 4/20/06 9:32 PM Page 28

TV/VCR/DTV

28 Status Displays (cont’d)

Instructions continued from the previous page.

The following information is displayed in the INFO1

mode.

(1) Channel number

(2) Broadcast station

(3) Program title (max. 2 lines displayed)

(4) Audio language (“OTHER” is displayed when the audio

language cannot be acquired, or the acquired languages

are other than ENGLISH, SPANISH or FRENCH.)

(5) Program air time

(1)

(5)

KABC

AB WORLD

ENGLISH

CH 95-03

(2)

(3)

(4)

11:00AM- 1:00PM

The program guide added to the displayed information

in the INFO1 mode is displayed in the INFO2 mode.

KABC

CH 95-03

AB WORLD

ENGLISH

11:00AM- 1:00PM

We bring you the latest information

from around the world as quickly as

possible.

Program

guide

Picture Controls

Follow these steps to adjust the TV/VCR/DVD’s brightness,

sharpness, tint, color or contrast.

REC MODE

REC

PLAY

Press PICTURE/SLEEP twice.

STOP

SLOW

PAUSE

TITLE

RETURN

Within 5 seconds, press ▲ or ▼ to select the

picture control you want to adjust.

ENTER

2-3

You can select BRIGHT, CONTRAST, COLOR, TINT

DISC

SET-UP

or SHARPNESS.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

BRIGHT

MUTE

DISPLAY

Within 5 seconds, press s or B to adjust the

Helpful Hint

picture control.

•

Degaussing: Magnetism from

nearby appliances and speakers

might affect the color of the

TV picture. If this happens,

move the TV/VCR/DVD away

from the appliance. If the color

is still not correct, disconnect

the power cord for 30

to decrease brightness to increase brightness

CONTRAST to decrease contrast to increase contrast

BRIGHT

to decrease color

to add purple

to brighten color

to add green

COLOR

TINT

SHARPNESS to make soft

to make clear

minutes. After 30 minutes, try

using the unit again.

T3221UB_EN1 4/20/06 9:32 PM Page 29

TV/VCR/DTV

Videotape Recording 29

Put a videotape in the

Place a tape with its record tab intact in the

TV/VCR/DVD.

cassette compartment of theTV/VCR/DVD.

The TV/VCR/DVD power will come on.

If the power is already on and a videotape is in the

unit, make sure the unit is in TV/VCR mode.

Press SELECT so the redVCR/TV light appears on the

front of the unit.

STANDBY-ON

OPEN/CLOSE

Press REC MODE until the desired tape speed

(SP or SLP) appears in the bottom left corner

of the screen. See tape speed details below.

CLEAR

+100

+10

REC MODE

REC

Press CH. ▲/▼ or the Number buttons to

select the channel you want to record.

You cannot change channels during recording. You can

only record and view one TV channel at a time.

4-5

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

Press REC once to start recording.

The REC/OTR light will flash on the front of the

TV/VCR/DVD. (If the tape does not have a record tab,

the tape will eject. Insert another tape.)

ENTER

DISC

SET-UP

To pause the recording, press PAUSE k. To

PICTURE

/SLEEP

CH.

VOL.

resume recording, press PAUSE k again or

press REC

SELECT

MODE

MUTE

DISPLAY

To stop recording, press STOP C .

Tape Speeds

This chart shows the recording/playback time for 3 types of

video cassettes (T160, T120 andT60). There are 3 playback

speeds: SP, LP and SLP. A tape will play only in the speed in

which it was recorded. When recording, you can change the

tape speed using REC MODE.You cannot record in LP speed

on thisTV/VCR/DVD.

Helpful Hints

• You cannot record DVD

contents onto a videotape

using this unit.

• Recording options are on

pages 30-35.

• If you pause a recording for 5

minutes, the unit will start

recording again automatically.

• You can change the tape speed

by pressing REC MODE while

a recording is in progress.

Some distortion may appear

on the tape.

The slower the speed, the more programming you can fit on

the tape. SLP is the slowest speed.

Cassette type / Playback Time

Tape Speed

T160

T120

T60

SP(Standard Playback) 2 hrs.

40 mins.

2 hrs.

1 hr.

LP(Long Playback)

(playback only)

SLP

5 hrs.

20 mins.

4 hrs.

6 hrs.

2 hrs.

3 hrs.

8 hrs.

(Super Long Playback)

T3221UB_EN1 4/20/06 9:32 PM Page 30

TV/VCR/DTV

30 One-Touch Recording

A One-Touch Recording (OTR) is an immediate timed

recording from 30 minutes to 8 hours long.

STANDBY-ON

OPEN/CLOSE

Before you begin ...

● Turn on the TV/VCR/DVD.

● Press SELECT to put the unit in TV/VCR mode.

The redVCR/TV light will appear on the front of the unit.

● Insert a videotape with its erase prevention tab in place.

Details are on page 8.

CLEAR

+100

+10

REC MODE

REC

Press the Number buttons or CH. ▲/▼ to

PLAY

select the channel you want to record.

STOP

SLOW

PAUSE

TITLE

Remember, if the TV/VCR/DVD is connected to a

Cable Box/Satellite Receiver, the TV/VCR/DVD must

be on channel 3, 4 or AUX.

Select the channel you want to record at the Cable

Box/Satellite Receiver. Details are on page 9.

RETURN

ENTER

DISC

SET-UP

VOL.

Press REC MODE to select a tape recording

speed (SP or SLP). Details are on page 29.

PICTURE

/SLEEP

CH.

SELECT

Press REC/OTR I on the front of the

Press REC/OTR I on the

front of theTV/VCR/DVD.

TV/VCR/DVD repeatedly to select a recording

length. Recording will start immediately.

Each press of REC/OTR I will increase the recording

time by 30 minutes. The maximum recording length is

8 hours.

Helpful Hints

• You cannot start an OTR with

the REC I button on the

remote control.

OTR (2:30)

• To show the remaining

recording time, press DISPLAY.

OTR and the remaining

recording time will appear

briefly in the top left corner of

the screen.

• If the tape ends before the

recording’s end time, the

TV/VCR/DVD will stop

recording, eject the tape, and

turn itself off.

Press STOP C to stop a one-touch recording

before its designated end time. Otherwise,

recording will stop at the time you designated. The

TV/VCR/DVD will turn off when the OTR ends.

• An OTR will continue even if

you turn off the TV/VCR/DVD.

The flashing REC/OTR light

indicates the recording is still

in progress.

• To change the recording

length while an OTR is in

progress, press REC/OTR

repeatedly.

• You cannot pause an OTR.

• If the preset time for a timer

recording comes up during an

OTR, the OTR has priority.

The timer recording will not

take place.

T3221UB_EN1 4/20/06 9:32 PM Page 31

TV/VCR/DTV

Timer Recording 31

Follow the steps below to program the TV/VCR/DVD to

record TV programs while you’re away from home.

The TV/VCR/DVD will record and turn itself off automatically.

You can set a maximum of 8 timer recordings.

STANDBY-ON

OPEN/CLOSE

Before you begin, make sure ...

● The clock is set. If the clock is not set, the Manual Clock

Set menu will appear. See pages 21-22 to set the clock.

● Channels are set. Details are on page 19.

● A tape is in the TV/VCR/DVD. Make sure the record tab is

intact. Details are on page 8.

CLEAR

+100

+10

REC MODE

REC

PLAY

Press SET-UP.

STOP

SLOW

PAUSE

TITLE

RETURN

Press ▲ or ▼ to selectTIMER

PROGRAMMING, then press ENTER.

2-4

ENTER

InTV/DTV/AUX Mode

In DVD Mode

DISC

SET-UP

– MAIN MENU –

B TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

B TIMER PROGRAMMING

SETTING CLOCK

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

PICTURE

/SLEEP

CH.

VOL.

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

SELECT

MODE

TIME SEARCH

INDEX SEARCH

DTV SET UP

MUTE

DISPLAY

DTV SET UP will show only in

DTV Mode.

Press ▲ or ▼ to select a program position.

Then, press B.

– TIMER PROGRAMMING –

DATE

BEGIN END

B- - - - - - - /- - - - - - :- - - :- - - -

- - - - - - - /- - - - - - :- - - :- - - -

With first cell flushing, press ▲ or ▼ to select “D”

(for Digital) or “-” (for Analog).Then press B.

– TIMER PROGRAMMING –

DATE

BEGIN END

B- - - - - - -/-- - - - - :- - - :- - - -

- - - - - - -/-- - - - - :- - - :- - - -

Example: Analog channel is

selected.

Helpful Hints

• You cannot access the Timer

Programming menu at step 2 if

the clock is not set. The

When you select “D” (Digital) or “-” (for Analog),

the channel you were watching last will be

entered in the CH field automatically.

Setting Clock menu will

appear. Follow the steps on

pages 21-24 to set the clock.

• Enter the information while

the space is flashing.

Instructions continue on the next page.

T3221UB_EN1 4/20/06 9:32 PM Page 32

TV/VCR/DTV

32 Timer Recording (cont’d)

Instructions continue on the next page.

STANDBY-ON

OPEN/CLOSE

While CH is selected, press ▲ or ▼ to select

the channel you want to record. Then press B.

– TIMER PROGRAMMING –

DATE

BEGIN END

B-

08 -/-- - - - - :- - - :- - - -

- - - - - - -/-- - - - - :- - - :- - - -

CLEAR

+100

+10

REC MODE

REC

PLAY

If the TV/VCR/DVD is connected to a Cable Box/Satellite

Receiver, the TV/VCR/DVD must be on channel 3, 4 or AUX.

Set CH as 03, 04 or AUX in the Timer Programming menu.

Choose the channel you want to record at the Cable

Box/Satellite Receiver. Leave the Cable Box/Satellite Receiver

on for the timer recording. Leave the TV/VCR/DVD set to

AUX. (Press SELECT on the remote to choose AUX at the

TV/VCR/DVD.) Additional details are on page 9.

STOP

SLOW

PAUSE

TITLE

RETURN

ENTER

5-6

DISC

SET-UP

While DATE is selected, press ▲ or ▼ to select

the desired date.Then, press B.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

– TIMER PROGRAMMING –

MUTE

DISPLAY

DATE

BEGIN END

08 9/01 SUN - :- - - :- - - -

- - - - - - -/-- - - - - :- - - :- - - -

The DATE will change in the order described

below.

Example: If today is 9/01 (2006)

9 / 01

9 / 02

9 / 03

FRI

SAT

SUN

12 / 31

(2007) 1 / 01

1 / 02

SUN

MON

TUE

Press

8 / 31

EVERY

FRI

SUN

MON

TUE

WED

THU

FRI

SAT

DAY

Likewise, set the BEGIN time and END time.

T3221UB_EN1 4/20/06 9:32 PM Page 33

TV/VCR/DTV

Timer Recording (cont’d) 33

Finally, set the tape speed (SP or SLP) with

STANDBY-ON

OPEN/CLOSE

▲ or ▼.Then press ENTER.

– TIMER PROGRAMMING –

DATE

BEGIN END

08 9/01 SUN 6:12 PM 7:12PM SP

- - - - - - -/-- - - - - :- - - - - :- - - - - -

CLEAR

+100

+10

REC MODE

REC

A program is now set.

PLAY

STOP

SLOW

PAUSE

TITLE

Press SET-UP to remove the menu.

RETURN

Press STANDBY-ONy to turn off the

TV/VCR/DVD and set the timer recording.

The red REC/OTR light will appear on the front of the

TV/VCR/DVD.

You must turn off the TV/VCR/DVD to activate a

timer recording. If the power is not off and you

continue watching TV, TIMER REC STANDBY starts

flashing on the screen 2 minutes before the

programmed start time. In such case, turn off the

power to start the timer recording as scheduled.

ENTER

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Helpful Hints

• To correct information while

setting the Timer Recording,

press s to go back one step

and select the incorrect

information. Press ▲ or ▼ to

enter the correct information.

• While a timer recording is in

progress, the red REC/OTR

light will flash.

• If a timer recording is set for

hours or days later, you can

use the TV/VCR/DVD until

then. Just be sure to turn off

the TV/VCR/DVD about 5

minutes before the recording.

Set the Cable Box/Satellite

Receiver if appropriate.

• If the record tab is missing, the

videotape will eject when you

press STANDBY-ONy to

turn off the TV/VCR/DVD.

Insert a recordable tape for

the timer recording.

• If the tape ends before the

recording is complete, the

TV/VCR/DVD will stop

recording immediately and

eject the tape.

T3221UB_EN1 4/20/06 9:32 PM Page 34

TV/VCR/DTV

34 Timer Recording (cont’d)

Extending aTimer Recording

To make a Timer Recording start and end later than originally scheduled,

follow these steps.

1 With the unit on, press SET-UP. Press ▲ or ▼ to select TIMER

PROGRAMMING. Press ENTER.

2 Press REC I, then press ▲ or ▼ to select the desired program.

3 Press REC I again. Each press of REC I will shift forward the

beginning/end time by 10 minutes. If the recording is in progress, each

press will shift forward the end time only.

If you adjust the times during recording, the recording speed

automatically changes to SLP.

To restore the original recording times, press PAUSE k.

4 Press SET-UP to remove the menu.

5 If the timer recording is scheduled to start later, press STANDBY-ONy

to turn off the TV/VCR/DVD for the recording.

Correcting aTimer Recording

1 With the unit on, press SET-UP. Press ▲ or ▼ to select TIMER

PROGRAMMING. Press ENTER.

2 Press ▲ or ▼ to select a timer recording, then press B.

3 Press s or B to select the information you want to change.

Press ▲ or ▼ to enter the correct information.

4 Press SET-UP to remove the menu.

5 Press STANDBY-ONy to turn off the TV/VCR/DVD to set the

recording.

CancellingTimer Recordings

To cancel aTimer Recording that is in progress:

1 The red REC/OTR light will flash during recording. Press

STANDBY-ONy to turn on the TV/VCR/DVD, then press

STOP/EJECT C A on the front of the TV/VCR/DVD.

To cancel aTimer Recording that has not started:

1 With the unit on, press SET-UP.

Press ▲ or ▼ to select TIMER PROGRAMMING. Press ENTER.

2 Press ▲ or ▼ to select a timer recording.

3 Press CLEAR. All the information for the selected recording will

disappear.

4 Press SET-UP to remove the menu.

Checking ScheduledTimer Recordings

1 With the unit on, press SET-UP.

Press ▲ or ▼ to select TIMER PROGRAMMING.

2 Press ENTER.The program details will appear on the screen.

3 Press SET-UP to remove the menu.

T3221UB_EN1 4/20/06 9:32 PM Page 35

TV/VCR/DTV

Timer Recording Auto Return 35

Use this feature to rewind the tape to the beginning of a

completed timer recording.

STANDBY-ON

OPEN/CLOSE

Press SET-UP.

Press ▲ or ▼ to select USER’S SET UP.

Then, press ENTER.

CLEAR

+100

+10

InTV/DTV/AUX Mode

In DVD Mode

REC MODE

REC

– MAIN MENU –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

TIMER PROGRAMMING

SETTING CLOCK

B USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

PLAY

STOP

SLOW

PAUSE

TITLE

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

RETURN

TIME SEARCH

INDEX SEARCH

DTV SET UP

2-4

DTV SET UP will show only in

DTV Mode.

ENTER

DISC

SET-UP

Press ▲ or ▼ to select AUTO RETURN.

1,5

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Press ENTER until ON appears beside AUTO

RETURN. To turn off Auto Return, press ENTER to

choose OFF instead.

– USER'S SET UP –

RENTAL

[OFF]

REPEAT PLAY [OFF]

B AUTO RETURN [ON]

Press SET-UP. When AUTO RETURN is ON,

when all the timer recordings are completed, the tape

will rewind to the beginning of the recorded

program(s).

Helpful Hints

• If you press STANDBY-ONy

while the tape is rewinding,

the rewinding will stop.

• Even if there is a power

failure, the TV/VCR/DVD

retains the Auto Return

Setting.

T3221UB_EN1 4/20/06 9:32 PM Page 36

TV/VCR/DTV

36 Rerecording (Tape Duplication)

AUDIO andVIDEO OUT Jacks on the source unit

(VCR or Camcorder)

Audio Cables from

AUDIO

HEADPHONE VIDEO

AUDIO OUT to AUDIO IN

AUDIO

OUT

VIDEO

OUT

AUDIO andVIDEO IN Jacks on

the front of TV/VCR/DVD

Video Cable from

VIDEO OUT toVIDEO IN

Make the connections shown above. Use audio

and video cables (not supplied). Connect the

source unit (VCR or Camcorder) to a power

source after connections are made.

TheVCR or Camcorder will play your tape. Insert a

prerecorded tape in the source unit. If playback

begins, press STOP C on theVCR or Camcorder.

The TV/VCR/DVD will record your tape. Insert a

blank videotape in the cassette compartment

of theTV/VCR/DVD. Make sure the tape’s record

tab is intact and the TV/VCR/DVD power is on.

Helpful Hints

• Unauthorized recording of

copyrighted television

programs, videotapes or other

materials may infringe on the

rights of copyright owners and

violate copyright laws.

• Different brands of equipment

may operate differently.

• Make sure all connections are

secure. Otherwise, you may

not record both picture and

sound.

• Programs that are copyright

protected may not record

clearly.

• You cannot record a DVD

onto a videotape using this

TV/VCR/DVD.

• You can use this connection

to simply view tapes playing

on a camcorder orVCR at the

TV/VCR/DVD. Follow steps 1,

2 and 4 for connections and

AUX setup. Then play the tape

on the camcorder, etc., as

usual.

Point theTV/VCR/DVD remote control at the

TV/VCR/DVD. Press SELECT or CH. o/p until

AUX appears on the screen. The TV/VCR/DVD is

now in line input or auxiliary mode.

Press REC MODE until the desired tape speed

(SP or SLP) appears in the lower left corner of

the screen.

Press PLAY B on theVCR or Camcorder and

REC/OTR I on yourTV/VCR/DVD at the same

time. Videotape copying will begin.

To stop copying, press STOP/EJECT C A on the

TV/VCR/DVD, then stop the tape on theVCR

or Camcorder.

T3221UB_EN1 4/20/06 9:32 PM Page 37

TV/VCR/DTV

Repeat Playback 37

Repeat Playback allows you to play a videotape continuously.

All Repeat will repeatedly play the tape from the beginning

to the end. Blank Repeat will repeatedly play the tape from

its beginning to the first part that is blank for more than 10

seconds.

STANDBY-ON

OPEN/CLOSE

Press SET-UP.

CLEAR

+100

+10

REC MODE

REC

PLAY

Press ▲ or ▼ to select USER’S SET UP.

STOP

SLOW

PAUSE

TITLE

Then, press ENTER.

RETURN

InTV/DTV/AUX Mode

In DVD Mode

– MAIN MENU –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

TIMER PROGRAMMING

SETTING CLOCK

B USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

2-4

ENTER

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

DISC

SET-UP

TIME SEARCH

1,5

INDEX SEARCH

DTV SET UP

PICTURE

/SLEEP

CH.

VOL.

DTV SET UP will show only in

DTV Mode.

SELECT

MODE

MUTE

DISPLAY

Press ▲ or ▼ to select REPEAT PLAY.

Press ENTER until ALL or BLANK appears

beside REPEAT PLAY. Or, to cancel Repeat Play,

press ENTER to select OFF.

– USER'S SET UP –

RENTAL

[OFF]

B REPEAT PLAY [ALL]

AUTO RETURN [OFF]

Press SET-UP to remove the menu.

Press PLAY B to play a videotape.

REPEAT PLAY will appear on the screen briefly.

Helpful Hints

• Repeat Playback stays in effect

after you turn off the

TV/VCR/DVD. The

TV/VCR/DVD keeps the

Repeat Playback setting even if

the power fails.

• If RENTAL is ON,

RENTAL PLAY will appear on

the screen instead of REPEAT

PLAY. Details are on page 38.

T3221UB_EN1 4/20/06 9:32 PM Page 38

TV/VCR/DTV

38 Rental Playback

This function enables you to improve picture quality when

playing worn cassettes such as rented videotapes.

STANDBY-ON

OPEN/CLOSE

Press SET-UP.

CLEAR

+100

+10

Press ▲ or ▼ to select USER’S SET UP. Then,

press ENTER.

InTV/DTV/AUX Mode

REC MODE

REC

In DVD Mode

– MAIN MENU –

PLAY

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

TIMER PROGRAMMING

SETTING CLOCK

B USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

STOP

SLOW

PAUSE

TITLE

RETURN

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

DTV SET UP

2-3

ENTER

DTV SET UP will show only in

DTV Mode.

DISC

SET-UP

1,4

Press ▲ or ▼ to select RENTAL.

Press ENTER until ON appears beside

RENTAL. To turn off Rental, press ENTER to

choose OFF.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

– USER'S SET UP –

B RENTAL

[ON]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

Press SET-UP to exit the menu.

Press PLAY B to start videotape playback.

RENTAL PLAY will appear briefly on the screen.

Helpful Hints

• Once you select Rental

Playback, it stays in effect even

after you turn off the

TV/VCR/DVD.

• The TV/VCR/DVD will retain

the Rental setting even if the

power fails.

T3221UB_EN1 4/20/06 9:32 PM Page 39

TV/VCR/DTV

Zero Return, SleepTimer 39

Zero Return

STANDBY-ON

OPEN/CLOSE

The videotape counter shows the elapsed recording or

playback time in hours, minutes and seconds from the point at

which the counter was set to 0. The counter time will not

change on a blank tape or blank portions on a tape. The “–”

before the tape counter indicates the amount of remaining

recording/playing time before the counter reaches 0.

Follow the steps below to reset the tape counter to 0 at a

tape location you want to refer to later.

CLEAR

+100

+10

2-3

REC MODE

REC

Play, rewind or fast forward the tape to the

location you would like to refer to later.

PLAY

Press STOP C to stop the tape.

STOP

SLOW

PAUSE

TITLE

Press CLEAR once to display the tape counter

on theTV screen.

RETURN

Press CLEAR one more time to set the

counter to 0:00:00.

ENTER

DISC

SET-UP

To return to this same point later, press

SET-UP. Press ▲ or ▼ to select ZERO

PICTURE

/SLEEP

RETURN. Then, press ENTER.

CH.

VOL.

The tape counter will appear on the screen and the

TV/VCR/DVD begins rewinding or fast forwarding the

tape. When the tape reaches the point at which you

SELECT

MODE

MUTE

DISPLAY

set the counter to 0, the tape will stop. Press PLAY

to watch the tape from the designated point.

InTV/DTV/AUX Mode

In DVD Mode

– MAIN MENU –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

TIMER PROGRAMMING

SETTING CLOCK

USER'S SET UP

LANGUAGE [ENGLISH]

B ZERO RETURN

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

B ZERO RETURN

TIME SEARCH

INDEX SEARCH

DTV SET UP

REC MODE

REC

DTV SET UP will show only in

DTV Mode.

PLAY

SleepTimer

STOP

SLOW

PAUSE

TITLE

Use the Sleep Timer to program the TV/VCR/DVD to shut

off in a certain amount of time.

RETURN

Press PICTURE/SLEEP once. Sleep

information will appear at the button of the

ENTER

TV screen.

DISC

SET-UP

Press s or B to change the amount of time

until shut down. Each press of B will increase the

time by 30 minutes. You may set the Sleep Timer of

30, 60, 90 or 120 minutes.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

After 5 seconds, the Sleep Timer information will

disappear from the screen.The TV/VCR/DVD will turn

itself off after the selected amount of time has passed.

MUTE

DISPLAY

Helpful Hint

• To see how much time

remains before the

TV/VCR/DVD turns itself off,

press PICTURE/SLEEP once.

The information will disappear

automatically in 5 seconds.

SLEEP 120 MINUTE

To cancel the SleepTimer

Press CLEAR to set the amount of time to 0 while the Sleep

information is displayed on the screen.

T3221UB_EN1 4/20/06 9:32 PM Page 40

TV/VCR/DTV

40 Time Search

Time Search lets you quickly advance the videotape to a

position simply by entering the amount of playback time you

want to skip.

In the example below, Time Search is set to 2 hours, 50

minutes from the present position.

Insert a videotape.

STANDBY-ON

OPEN/CLOSE

Insert a videotape.

Press SET-UP. Press ▲ or ▼ to select

TIME SEARCH. Then, press ENTER.

CLEAR

+100

+10

– MAIN MENU –

REC MODE

REC

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

PLAY

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

STOP

SLOW

PAUSE

TITLE

B TIME SEARCH

INDEX SEARCH

RETURN

DTV SET UP

DTV SET UP will show only in

DTV Mode.

ENTER

2-4

DISC

SET-UP

Press ▲ or ▼ until your desired time appears

beneathTIME SEARCH at the top of the

screen. (Example: 2:50 for 2 hours, 50 minutes)

Each press of ▲ or ▼ increases or decreases the

length of time by 10 minutes.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

To cancel the Time Search at this point, press SET-UP.

MUTE

DISPLAY

TIME SEARCH

2 : 50

Press s or B to rewind or fast forward the

tape the length of time you chose.

The TV/VCR/DVD will rewind or fast forward the

tape the specified amount of time.

The time counts down on the screen as the search

progresses. When 0:00 is reached, the tape will start

playing.

Or, to cancel the Time Search before it finishes, press

STOP C.

Helpful Hints

• A Time Search can be set up

to a maximum of 9 hours 50

minutes in 10-minute

increments.

• Time Search will not operate

during recording.

T3221UB_EN1 4/20/06 9:32 PM Page 41

TV/VCR/DTV

Index Search 41

This feature lets you quickly rewind or fast forward to the

start of recordings.

STANDBY-ON

OPEN/CLOSE

● Index Marks are made automatically at the start of all

recordings. They are not made where recording pauses.

The time gap between Index Marks should be greater than 1

minute for SP recording and 3 minutes for SLP recording.

This means recordings should be 1 (SP) or 3 (SLP) minutes

long. Otherwise, Index Search may not find the start of the

recording. In some cases, Index Marks at the beginning of a

videotape cannot be detected.

CLEAR

+100

+10

REC MODE

REC

PLAY

STOP

SLOW

PAUSE

TITLE

Press SET-UP. Press ▲ or ▼ to select

INDEX SEARCH. Then, press ENTER.

RETURN

– MAIN MENU –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

ENTER

1-3

DISC

SET-UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

B INDEX SEARCH

DTV SET UP

PICTURE

/SLEEP

CH.

VOL.

DTV SET UP will show only in

DTV Mode.

SELECT

MODE

MUTE

DISPLAY

Press ▲ or ▼ until the number of programs you

want to skip appears beneath INDEX SEARCH.

To cancel an Index Search at this point, press SET-UP.

INDEX SEARCH

0 3

Helpful Hints

Press s or B. The TV/VCR/DVD begins rewinding or

• Every time an Index Mark (or

recording) is passed, the

number beneath INDEX

SEARCH on the screen

decreases by one.

• A videotape must be in the

TV/VCR/DVD for this function

to work.

fast forwarding the videotape to the beginning of the

desired program.

When the program is reached, playback will start.

• You may search up to 20

Index Marks.

• This function will not operate

during recording.

• To cancel an Index Search,

press STOP C.

• If the end of the tape is

reached during an Index

Search(forward), the tape will

rewind to the beginning

automatically. The

TV/VCR/DVD will turn off and

the tape will eject.

T3221UB_EN1 4/20/06 9:32 PM Page 42

TV/VCR/DTV

42 Videotape Playback Features

Slow Motion

STANDBY-ON

OPEN/CLOSE

Press PAUSE k during playback to pause the

videotape. Then press i/g to start slow

motion. Sound will be mute during slow motion.

Slow motion will stop automatically after 5 minutes

to prevent damage to the tape.

CLEAR

+100

+10

REC MODE

REC

Press PLAY B to return to normal playback.

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

Forward and Reverse Searching

(SP/LP/SLP)

ENTER

During videotape playback, press and release

DISC

SET-UP

j/h or i/g. A fast forward or reverse

picture search will begin.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

Press PLAY B to return to normal playback.

MUTE

DISPLAY

Super High Speed Searching (LP/SLP)

During tape playback, press

j/h or i/g, then press again. The

TV/VCR/DVD will search the tape in high speed.

Press j/h or i/g repeatedly to switch

between Regular and High Speed Searching.

Press PLAY B to return to normal playback.

Viewing a Still Picture

During tape playback, press PAUSE k.

A still picture will appear on the screen. The picture

Helpful Hints

advances each time you press PAUSE k.

• SP/LP/SLP means this feature

will work with tapes recorded

in Standard Playback, Long

Playback or Super Long

After a tape is paused for 5 minutes, playback will

stop automatically. This prevents damage to the tape

and TV/VCR/DVD.

Playback. LP/SLP means this

feature will work with tapes

recorded in Long Playback and

Super Long Playback. Tape

speed details are on page 29.

• During forward and reverse

searching, horizontal noise

bars will appear on the screen.

If the still picture vibrates vertically, stabilize

the picture by pressing CH. o or p.

To release the still picture and return to

normal playback, press PLAY B.

T3221UB_EN1 4/20/06 9:32 PM Page 43

TV/VCR/DTV

Automatic Operation Features 43

The following videotape features are available.

Automatic Rewind, Eject, Off

When you play, fast forward or record a videotape to its end, the TV/VCR/DVD will rewind the tape, stop,

turn itself off, and eject the tape.

If Repeat Play is activated, playback will start again instead.

Details are on page 37.

The tape will not rewind automatically after a timer recording ends. To rewind a tape after timer recordings, see

Auto Return details on page 35.

AutomaticTracking Adjustment

The TV/VCR/DVD automatically adjusts the videotape tracking to give you the best possible picture quality.

With some recordings, however, you may get a better picture using the manual tracking controls (see

below).

ManualTracking

To adjust the tracking manually, press CHANNEL o/p on the front of the TV/VCR/DVD or CH. o/p on

the remote control during playback.

Tracking returns to Automatic Tracking Adjustment when you insert a tape or press STOP C.

Before

Tracking

Adjustment

After

Tracking

Adjustment

T3221UB_EN1 4/20/06 9:32 PM Page 44

TV/VCR/DTV

44 Closed Captions (TV)

Follow the steps below to select closed captions for TV

programming. Not all TV programs and commercials have

closed captions or all types of closed captions (second

language, half-screen text, etc.). If closed captioning is not

broadcast, you cannot receive it. This does not indicate a

problem with the TV/VCR/DVD. Check your TV program

listings for shows with closed captions.

If the TV/VCR/DVD receives poor quality television signals,

the captions may contain errors, or there might be no

captions at all. Some possible causes of poor quality signals

are:

STANDBY-ON

OPEN/CLOSE

CLEAR

+100

+10

REC MODE

REC

PLAY

● Automobile ignition noise

● Electric motor noise

● Weak signal reception

STOP

SLOW

PAUSE

TITLE

RETURN

● Multiplex signal reception (ghosts or screen flutter)

● Playing poorly recorded or worn videotapes

1-2

ENTER

DISC

SET-UP

Press SET-UP.

1,3

Press ▲ or ▼ to select CAPTION.

PICTURE

/SLEEP

CH.

VOL.

– MAIN MENU –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

SELECT

MODE

V-CHIP SET UP

MUTE

DISPLAY

LANGUAGE [ENGLISH]

B CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

DTV SET UP

DTV SET UP will show only in

DTV Mode.

Press ENTER repeatedly to select CAPTION1,

CAPTION2, TEXT1, TEXT2 or OFF.

CAPTION1 displays standard closed captions (what a

character is saying). CAPTION2 displays foreign

language closed captions (foreign language words

showing what a character is saying).

Helpful Hints

• If a black box appears on the

screen that means a TEXT

mode is selected. In this case,

select CAPTION1,

CAPTION2 or OFF to

remove the black box.

• The TV/VCR/DVD retains the

Closed Caption setting if the

power fails.

• Abbreviations, symbols and

other grammatical shortcuts

may be used in order to keep

pace with the on-screen

action.This is not a problem

with the TV/VCR/DVD.

• Changing channels may delay

closed captions for a few

seconds.

TEXT1 and TEXT2 display half-screen text (such as a

channel guide, schedule or announcement).

OFF turns off closed captions. Captions will not

appear on the screen.

– MAIN MENU –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

B CAPTION [CAPTION 1]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

DTV SET UP

DTV SET UP will show only in

DTV Mode.

Press SET-UP to exit the menu.

• Adjusting or muting the

volume may delay closed

captions for a few seconds.

T3221UB_EN1 4/20/06 9:32 PM Page 45

TV/VCR/DTV

Closed Captions (DTV) 45

STANDBY-ON

OPEN/CLOSE

Press SET-UP.

Press ▲ or ▼ to select DTV SET UP.

Then, press ENTER.

– MAIN MENU –

CLEAR

+100

+10

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

REC MODE

REC

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

PLAY

TIME SEARCH

INDEX SEARCH

B DTV SET UP

STOP

SLOW

PAUSE

TITLE

RETURN

DTV SET UP will show only in

DTV Mode.

2-4

Press ▲ or ▼ to select DTVCC.

ENTER

Then, press ENTER.

DISC

SET-UP

– DTV SET UP –

DTV DISPLAY [LETTER BOX]

B DTVCC

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Press ▲ or ▼ to select an item.

– DTVCC –

CAPTION SERVICE [SERVICE1/6]

USER SETTING

CAPTION SIZE

FONT STYLE

[ON]

[MIDDLE]

[STYLE1/8]

CHARACTER EDGE [NONE]

FORE OPACITY

FORE COLOR

BACK OPACITY

BACK COLOR

[SOLID]

[WHITE]

[SOLID]

[BLACK]

Referring to the explanations below, change the

setting as you prefer by pressing ENTER.

Caption Service

● Available Caption Services differ depending on the

broadcast description.

Instructions continue on the next page.

T3221UB_EN1 4/20/06 9:32 PM Page 46

TV/VCR/DTV

46 Closed Captions (DTV) (cont’d)

Instructions continued from the previous page.

STANDBY-ON

OPEN/CLOSE

User Setting

The USER SETTING function lets you change the caption size

and font style.

[OFF]

[ON]

CLEAR

+100

+10

REC MODE

REC

PLAY

STOP

SLOW

PAUSE

TITLE

When USER SETTING is set to ON, you can set the

RETURN

following items.

– DTVCC –

CAPTION SERVICE [SERVICE1/6]

ENTER

USER SETTING

CAPTION SIZE

FONT STYLE

[ON]

[MIDDLE]

[STYLE1/8]

CHARACTER EDGE [NONE]

DISC

SET-UP

FORE OPACITY

FORE COLOR

BACK OPACITY

BACK COLOR

[SOLID]

[WHITE]

[SOLID]

[BLACK]

PICTURE

/SLEEP

CH.

VOL.

Referring to the explanations below, change the

setting as you prefer by pressing ENTER.

SELECT

MODE

MUTE

DISPLAY

[CAPTION SIZE]

Text size of the displayed caption can be switched as

below.

[FONT STYLE]

Font style of the displayed caption can be switched as

below.

T3221UB_EN1 4/20/06 9:32 PM Page 47

TV/VCR/DTV

Closed Captions (DTV) (cont’d) 47

[BACK OPACITY]

[CHARACTER EDGE]

Text edging of the displayed caption can be

Background opacity of the displayed caption

can be switched as below.

switched as below.

[BACK COLOR]

Background color of the displayed caption

can be switched as below.

[FORE OPACITY]

Text opacity of the displayed caption can be

switched as below.

[FORE COLOR]

Text color of the displayed caption can be

switched as below.

T3221UB_EN1 4/20/06 9:32 PM Page 48

TV/VCR/DTV

48 Setting V-Chip

TV Rating Settings

STANDBY-ON

OPEN/CLOSE

V-CHIP enables parents to prevent their children from

watching inappropriate material on TV. V-CHIP reads the

ratings for programming (except for news and sports

programs, unedited movies on premium cable channels, and

Emergency Broadcast System signals), then denies access to

programming if the program’s rating meets the limitations

you select. In this case, a “PROTECTED PROGRAM by ...”

message appears on the TV screen.

CLEAR

+100

+10

REC MODE

REC

If the “PROTECTED...” message appears during your TV

viewing, change to a channel that is not blocked. Then, you

can access theV-Chip Setup menu and change the settings to

allow all TV viewing.

Programming may be rated by the Motion Picture

Association of America (MPAA) or according to the

Television Parental Guidelines. To block any inappropriate

programming, set your limits in both MPAA RATING and TV

RATING.

Before you begin, make sure ...

● The TV/VCR/DVD is on.

● The unit is in TV/VCR mode. Press SELECT on the

remote until you see TV channels and see the red

VCR/TV light on the front of the TV/VCR/DVD.

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

1,3

ENTER

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Press SET-UP. Press ▲ or ▼ to selectV-CHIP

SET UP. Then, press ENTER.

– MAIN MENU –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

DTV SET UP

DTV SET UP will show only in

DTV Mode.

Press the Number buttons to enter the 4-digit

access code. When entering the access code for the

first time or if there has been a power failure, enter

default code 0000. 4 Xs will appear instead of your

code. This protects the identity of your code.

ACCESS CODE

–

TV Rating Explanations

• TV-Y - Appropriate for all

children

Press ▲ or ▼ to selectTV RATING.

Then, press ENTER.

• TV-Y7 - Appropriate for

children seven and

– V-CHIP SET UP –

older

TV RATING

MPAA RATING

CHANGE CODE

• TV-G - General Audience

• TV-PG - Parental Guidance

suggested

• TV-14 - Unsuitable for

children under 14

• TV-MA - Mature audience only

T3221UB_EN1 4/20/06 9:32 PM Page 49

TV/VCR/DTV

Setting V-Chip (cont’d) 49

Press ▲ or ▼ to select theTV Rating level at

STANDBY-ON

OPEN/CLOSE

which you want to block viewing, then press

ENTER once. If you press ENTER again, the

subratings for that category will appear.

Details are on pages 50-51.

When you select the rating category and set it to

BLOCK, the higher ratings will turn to BLOCK

automatically. Lower ratings will turn toVIEW.

When you set “TV-Y” toVIEW (or BLOCK), all

ratings will turn toVIEW (or BLOCK) automatically.

CLEAR

+100

+10

REC MODE

REC

PLAY

STOP

SLOW

PAUSE

TITLE

TV-Y

TV-Y7

[VIEW]

(

)

[VIEW]

B TV-G

TV-PG

TV-14

[BLOCK]

RETURN

(

)

TV-MA

ENTER

DISC

SET-UP

Press SET-UP to save your settings and remove

the menus.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Helpful Hints

• If you want to disableV-Chip

so you can view all TV

programming, set TV-Y to

VIEW.

• TheV-CHIP settings will be

retained after a power failure

(except the access code

reverts to 0000).

T3221UB_EN1 4/20/06 9:32 PM Page 50

TV/VCR/DTV

50 Setting V-Chip (cont’d)

TV Rating Subratings

STANDBY-ON

OPEN/CLOSE

When you select TV-Y7, TV-PG, TV-14 or TV-MA, you can

use the subratings to block specific elements of

programming, such as language or violence.

Press SET-UP.

CLEAR

+100

+10

REC MODE

REC

Press ▲ or ▼ to selectV-CHIP SET UP.

PLAY

Press ENTER.

STOP

SLOW

PAUSE

TITLE

– MAIN MENU –

RETURN

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

2,4

ENTER

TIME SEARCH

INDEX SEARCH

DISC

SET-UP

DTV SET UP

DTV SET UP will show only in

DTV Mode.

PICTURE

/SLEEP

CH.

VOL.

Press the Number buttons to enter the 4-digit

access code. The default code is 0000 (if you have

SELECT

MODE

MUTE

DISPLAY

not set up your own code yet or if there has been a

power failure).

ACCESS CODE

–

Press ▲ or ▼ to selectTV RATING.

Press ENTER.

– V-CHIP SET UP –

B TV RATING

MPAA RATING

CHANGE CODE

T3221UB_EN1 4/20/06 9:33 PM Page 51

TV/VCR/DTV

Setting V-Chip (cont’d) 51

Press ▲ or L to select the rating you wish to

STANDBY-ON

OPEN/CLOSE

adjust. Then, press ENTER twice to go to its

subratings.

Example:

TV-Y7

B FV

[BLOCK]

TV-Y7 subratings

CLEAR

+100

+10

REC MODE

REC

PLAY

● When you selectTV-Y7:

Press ▲ or ▼ to select FV (FantasyViolence, violence

that seems realistic to young children).

Then, press ENTER to select BLOCK orVIEW.

● When you selectTV-PG, TV-14 orTV-MA:

Press ▲ or ▼ to select “D” (Suggestive Dialog), “L”

(Coarse Language), “S” (Sexual Situation) or “V”

(Violence). Then, press ENTER repeatedly to select

BLOCK orVIEW for each subrating.

STOP

SLOW

PAUSE

TITLE

RETURN

ENTER

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

To go to the previous menu, press RETURN.

SELECT

MODE

MUTE

DISPLAY

Press SET-UP to save your settings and remove the

menu.

Helpful Hints

• Dialog (D) is not an available

subrating for TV-MA.

• Blocked subratings will appear

beside the rating category in

the TV Ratings menu.

• You cannot BLOCK a

subrating (D, L, S orV) if the

main category is set toVIEW.

However, you can set a

subrating toVIEW even when

the main category is set to

BLOCK.

• Changing the category to

BLOCK orVIEW

automatically changes all its

subratings to the same

(BLOCK orVIEW).

T3221UB_EN1 4/20/06 9:33 PM Page 52

TV/VCR/DTV

52 Setting V-Chip (cont’d)

MPAA Rating Settings

STANDBY-ON

You can block TV channel viewing according to the Motion

Picture of Association ratings. To do so, follow these steps.

OPEN/CLOSE

Press SET-UP.

CLEAR

+100

+10

Press ▲ or ▼ to selectV-CHIP SET UP.

Then, press ENTER.

REC MODE

REC

– MAIN MENU –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

PLAY

STOP

SLOW

PAUSE

TITLE

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

RETURN

TIME SEARCH

INDEX SEARCH

DTV SET UP

4-5

ENTER

DTV SET UP will show only in

DTV Mode.

DISC

SET-UP

Press the Number buttons to enter the 4-digit

1,6

access code. (The default code is 0000 if you have

PICTURE

/SLEEP

CH.

VOL.

not set up your own code yet or if the power has

failed.)

SELECT

MODE

ACCESS CODE

MUTE

DISPLAY

–

Press ▲ or ▼ to select MPAA RATING.

Then, press ENTER.

MPAA Rating Explanations

– V-CHIP SET UP –

• G -

General Audience

Parental Guidance

suggested.

TV RATING

B MPAA RATING

CHANGE CODE

• PG -

• PG-13 - Unsuitable for children

under 13

Restricted; under 17

requires accompanying

parent or adult guardian

• R -

Press ▲ or ▼ to select the level at which you

want to block viewing. Then, press ENTER to

select BLOCK orVIEW.

When you Block a category, higher ratings turn to

BLOCK automatically. Lower ratings turn toVIEW.

When you set G toVIEW or BLOCK, all ratings turn

toVIEW or BLOCK automatically.

• NC-17 - No one under 17

admitted

Mature audience only

• X -

[VIEW]

PG-13

[VIEW]

B R

NC-17

[BLOCK]

Helpful Hints

• To disable all the MPAA

Ratings, set G toVIEW.

• TheV-CHIP settings will be

retained after a power failure

(except the access code

reverts to 0000).

Press SET-UP to save your settings and remove

the menu.

T3221UB_EN1 4/20/06 9:33 PM Page 53

TV/VCR/DTV

Setting V-Chip (cont’d) 53

Changing the Access Code

STANDBY-ON

OPEN/CLOSE

Although the default code 0000 is supplied with the

TV/VCR/DVD, you can set your own access code.

Press SET-UP.

3,5

2,4

CLEAR

+100

+10

Press ▲ or ▼ to selectV-CHIP SET UP.

Then, press ENTER.

REC MODE

REC

PLAY

STOP

SLOW

PAUSE

TITLE

Press the Number buttons to enter the old

access code. When doing this for the first time, use

0000. 4 Xs will appear instead of the code to protect

its identity.

RETURN

ENTER

ACCESS CODE

DISC

SET-UP

1,6

–

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Press ▲ or ▼ to select CHANGE CODE.

Then, press ENTER.

– V-CHIP SET UP –

TV RATING

MPAA RATING

B CHANGE CODE

Press the Number buttons to enter your

preferred access code in the NEW CODE

space. Then, enter the same code in the

CONFIRM CODE space. Again, Xs will appear

instead of the code numbers. The access code must

have exactly 4 digits.

TheV-CHIP SET UP screen will reappear.

NEW CODE

X X X X

CONFIRM CODE

– – – –

Helpful Hints

• If you enter the wrong code in

the CONFIRM CODE space,

repeat step 5. Enter the same

new code exactly in the

CONFIRM CODE space.

• If you unplug the power cord

or if the power fails, the

default code will be active

again (0000). Change your

access code again as

Press SET-UP to save your settings and remove

the menus.

necessary.

T3221UB_EN1 4/20/06 9:33 PM Page 54

TV/VCR/DTV

54 Changing the Screen Display Mode (DTV)

STANDBY-ON

OPEN/CLOSE

2 types of display modes can be selected in the digital mode.

You can select your favorite display mode and enjoy the

program.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DTV mode.

CLEAR

+100

+10

Press SET-UP.

REC MODE

REC

Using ▲ or ▼, select DTV SET UP.

PLAY

Then, press ENTER.

STOP

SLOW

PAUSE

TITLE

– MAIN MENU –

RETURN

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

2-3

ENTER

TIME SEARCH

INDEX SEARCH

DISC

SET-UP

B DTV SET UP

1,4

DTV SET UP will show only in

DTV Mode.

PICTURE

/SLEEP

CH.

VOL.

Press ▲ or ▼ to select DTV DISPLAY.

SELECT

MODE

– DTV SET UP –

MUTE

DISPLAY

B DTV DISPLAY [LETTER BOX]

DTVCC

Press ENTER to switch between LETTER BOX

and ZOOM.

D10-0

LETTERBOX

ZOOM

[LETTERBOX]

Display the digital-supported program in full-screen.

Black borders will spread in the upper and

lower screen.

[ZOOM]

Enlarge and display the center area of the digital-sup-

ported program.

The right and left side of image will be cut off.

To exit the menu, press SET-UP.

Helpful Hint

• You may not switch the display

mode depending on the

program.

T3221UB_EN1 4/20/06 9:33 PM Page 55

TV/VCR/DTV

Multi-ChannelTelevision Sound (MTS) 55

You can set the TV/VCR/DVD to receive or record TV

STANDBY-ON

programs in Stereo, Second Audio or Monaural Sound. Also,

you can set the TV/VCR/DVD to play videotapes in either

High Fidelity (HIFI) or Monaural (MONO or single-channel)

sound. See pages 56-57on how to set the sound mode.

OPEN/CLOSE

Press DISPLAY to see the sound status. During

TV viewing, press DISPLAY twice. During tape

CLEAR

+100

+10

playback, press DISPLAY once.

REC MODE

REC

STOP

HIFI

12:00AM

CH 123

STEREO/SAP

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

COUNT

0:00:00

ENTER

When a TV program is broadcast in stereo, STEREO

appears in the top right corner of the screen. When a

TV program is broadcast in second audio, SAP appears

in the top right corner of the screen. When a TV

program is broadcast both in stereo and second audio,

STEREO and SAP both appear.

Although a program may be broadcast in both stereo

and second audio, you cannot record in both stereo

and second audio at the same time.

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

You must set the TV/VCR/DVD to record in either

STEREO or SAP. Do this by changing the TV AUDIO

setting as described on page 56.

During tape playback, HIFI will appear in the top left

corner of the screen ifVCR AUDIO is set to HIFI.

Details are on page 57. If you play non-HIFI tapes while

VCR AUDIO is set to HIFI, HIFI will disappear from

the screen. The videotape will play in monaural sound.

T3221UB_EN1 4/20/06 9:33 PM Page 56

TV/VCR/DTV

56 Multi-ChannelTelevision Sound (MTS) (cont’d)

ForTV Audio

STANDBY-ON

OPEN/CLOSE

While receiving an MTS broadcast, press

MODE repeatedly to select STEREO, SAP

(Second Audio Program) or MONO.

CLEAR

+100

+10

● The mode changes according to the broadcast among

STEREO, SAP and MONO every time you press the

button.

REC MODE

REC

● The current mode appears on the TV screen for about 5

seconds.

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

When you press MODE repeatedly, the cur-

ENTER

rently selected language and the number of

received languages will be displayed on the

screen.

DISC

SET-UP

KABC

Jay Jay the Jet Plane

ENGLISH 1/3

CH 95-03

PICTURE

/SLEEP

CH.

VOL.

Audio

language

11:00AM- 1:00PM

SELECT

MODE

MUTE

DISPLAY

Every time you press MODE, the language will

be switched.

KABC

CA 95-03

Jay Jay the Jet Plane

ESPANÕL 2/3

11:00AM- 1:00PM

Languages you can switch differ depending on the

receiving broadcast.

Helpful Hints

• The initial setting is STEREO.

• When recording a TV

program, TV/VCR/DVD

records MTS broadcasts in

HIFI stereo sound

automatically unless you select

SAP mode recording

beforehand.

• If you select second audio

when second audio is not

available, the TV/VCR/DVD

will receive and record normal

audio.

• Even if you press MODE in

external input, the audio will

not be switched.

T3221UB_EN1 4/20/06 9:33 PM Page 57

TV/VCR/DTV

Multi-ChannelTelevision Sound (MTS) (cont’d) 57

ForVCR Audio

STANDBY-ON

OPEN/CLOSE

During playback of a videotape, press MODE

to switch HIFI or MONO.

● The current mode appears on the TV screen for

about 5 seconds.

● The initial setting is HIFI.

CLEAR

+100

+10

REC MODE

REC

● This setting is saved until the cassette is ejected.

PLAY

For External Devices

STOP

SLOW

PAUSE

TITLE

● Pressing MODE does not affect the audio output

mode of an external device.

RETURN

● The current audio output mode of an external

device does not appear on theTV screen.

ENTER

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Helpful Hints

• Non-HIFI tapes will play in

monaural automatically.

• When playing a non-HIFI tape,

pressing MODE will only affect

the display shown on the TV

screen but it does not affect

the actual sound mode.

• MTS broadcasts automatically

record in HIFI unless you

select SAP before recording.

Details are on page 56.

T3221UB_EN2 4/20/06 9:31 PM Page 58

DVD

58 DVD Disc Menus,Title Menus

PLAY

Disc Menus

STOP

SLOW

PAUSE

TITLE

Some DVDs contain menus that describe the contents of the

disc or allow you to customize disc playback. For example,

the menu may offer choices for subtitle languages, special

features or scene selection.

RETURN

ENTER

To use the DVD Disc menu and select playback features,

follow these steps.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

Press DISC MENU.

MUTE

DISPLAY

The DVD’s Disc menu will appear.

PLAY

Press ▲, ▼, s or B to select an item, then

press ENTER. Continue this process to set up all

STOP

SLOW

PAUSE

TITLE

the features you want or to start disc playback.

RETURN

Title Menus

ENTER

Some DVDs have a Title menu, which lists the titles available

on the DVD. Use the Title menu to play a specific Title.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

PressTITLE. The Title menu will appear.

MUTE

DISPLAY

If a Title menu is not available, the “X” may appear on

the TV screen. Or, if the DVD only has a main menu

as described above, it may appear when you press

TITLE.

STANDBY-ON

OPEN/CLOSE

Press ▲, ▼, s or B to select a title, then press

ENTER. Playback will begin at the title you selected.

CLEAR

+100

+10

Playback Control (PBC) Function

When playing aVideo CD with PBC (Playback Control), you

can use interactive menu (e.g., playlists) on the TV screen.

Refer to instructions accompanying yourVideo CD for more

details on PBC.

Some operations cannot be performed unless the PBC func-

tion is cancelled temporarily.

REC MODE

REC

PLAY

STOP

SLOW

PAUSE

Cancelling and calling back the PBC function

While playback is stopped, press the Number

Helpful Hints

Menus vary among discs. Follow

the information with the DVD.

• Not all DVDs have Disc or

Title menus.

• Some DVDs may refer to

chapters as “scenes.” Some

DVDs may refer to the Title

menu as the “scene index.”

• TITLE may not be active with

all DVDs.

•

Buttons to enter a track number.

PBC function is now cancelled and the playback of

theVideo CD will start.

To call back the PBC function, press STOP

twice, then press PLAY B.

The Title menu will appear on the TV screen.

T3221UB_EN2 4/20/06 9:31 PM Page 59

DVD

Fast Forward/Fast Reverse 59

STANDBY-ON

OPEN/CLOSE

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

During playback, press and hold

j/h or i/g on the remote control to

CLEAR

+100

+10

fast forward or fast reverse the picture.

REC MODE

REC

●

For DVD playback, each time you press and hold the

button, it will increase the speed by approximately 2, 8,

20, 50 or 100 times the normal speed. The speed may

vary depending on the disc.

will appear briefly on the TV screen to indicate

forward searching. Or, 1, 2, 3,

or 5 will indicate reverse searching.

PLAY

STOP

SLOW

PAUSE

TITLE

4 or

RETURN

ENTER

For DVD playback, the sound will be mute during

the search.

DISC

SET-UP

● ForVideo CDs,Audio CDs, MP3 or Windows

Media Audio playback, the speed will increase by

2, 8 or 30 times the normal speed. The speed may

vary depending on the disc.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

g 1, g 2 or g 3 will appear briefly on the

TV screen to indicate forward searching. Or,

h 1, h 2 or h 3 will indicate reverse

searching.

DISPLAY

For Audio CD, MP3 or Windows Media Audio

playback, the sound will be intermittent during the

search.

ForVideo CD Playback, the sound will be mute

during the search.

Example: Playing a DVD in

reverse at twice the normal

playing speed.

Press PLAY B to return to normal playback.

Helpful Hint

• If you use j/h or i/g

during Dual Playback, JPEG

playback will be paused.

T3221UB_EN2 4/20/06 9:31 PM Page 60

DVD

60 Chapter/Title/Time Search

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

STANDBY-ON

OPEN/CLOSE

During disc playback, press MODE repeatedly

until the Search menu appears in the information bar

1 _{at the top of the screen.}

CLEAR

+100

+10

_/17 (SEARCH)

REC MODE

REC

Then proceed to the step 2 of your desired search

mode.

PLAY

STOP

SLOW

PAUSE

TITLE

Chapter Search

RETURN

Enter the chapter number you want to search

in the input field in the information bar using

ENTER

the Number buttons. The chapter will play.

DISC

SET-UP

● To play a single-digit chapter when there are more

than 10 sections, press ENTER after entering the

chapter number.

● If you enter the chapter number that is not

available on the disc, playback will not begin (or the

current chapter will continue to play).

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Title Search

Press ▲ or ▼ repeatedly until

appears.

_/4 (SEARCH)

Enter the title number you want to search in

the input field using the Number buttons.

The title will play.

● To play a single-digit title when there are more

than 10 selections, press ENTER after entering the

title number.

● If you enter the title number that is not available

on the disc, playback will not begin (or the current

title will continue to play).

Time Search

Press ▲ or ▼ repeatedly until

appears.

_:_ _:_ _

1:29:00

Helpful Hints

• While playback is stopped, use

the Number buttons to select

a title for immediate playback.

During playback, use the

Number buttons to choose a

chapter for immediate

Within 1 minute, use the Number buttons to

enter the elapsed playing time (of the track or

3 _{title) at which you want play to begin. Enter the}

time in hours, minutes and seconds. Within a few

seconds, playback will start at the specified time.

● Example: 1 hour, 23 minutes and 30 seconds

1 → 2 → 3 → 3 → 0

playback.

• Title/Chapter Playback is not

available with some DVDs.

• Time search is not available

● Make sure the time you enter is within the total time

of the current title or track. If it is not, the time

space will clear and playback will continue at its

current point. The total time available in the current

track or title will be displayed in the information bar.

● If you make a mistake entering the time, press CLEAR

for MP3,Windows Media

Audio and JPEG files.

to clear the time area. Enter the correct information

T3221UB_EN2 4/20/06 9:31 PM Page 61

DVD

Track Search 61

Track Search

STANDBY-ON

OPEN/CLOSE

There are three ways to search for a track. Refer to A-C below.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD. Make sure a valid

disc is in the disc tray.

CLEAR

+100

+10

REC MODE

REC

Using the Number Buttons

PLAY

To select a single digit track number: press the number

directly. Playback of the selected track will start automatically.

To select 2 digit track number:

STOP

SLOW

PAUSE

TITLE

RETURN

-If the disc contains more than 9 and less than 100 tracks

(total track number is 2 digit), press +100/+10 button first.

Then enter the track number. For example if you want to

select track 26, press +100/+10 first, then press 2 and 6.

-If the disc contains more than 99 tracks (total track num-

ber is 3 digit), press +100/+10 button then press 0.Then

enter the track number. Or press +100/+10 first, enter the

track number, then press ENTER at the last.

To select 3 digit track number: Press +100/+10 first.

Then enter the track number.

If you enter a track number that is not available on the disc,

playback will not begin (or the current track will continue to play).

ENTER

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Using j/h and i/g

During playback, press i/g to skip the current

track and move to the next track.

Press j/h to return to the beginning of the

current track or to go to previous tracks.

(For JPEG Playback, you also can use { or B.)

Using MODE

During disc playback, press MODE repeatedly

until the Search menu appears in the information bar

at the top of the screen.

_/17 (SEARCH)

Press ▲ or ▼ repeatedly until

appears.

Within 1 minute, enter the desired track number

using the Number buttons.

Helpful Hints

j/h and i/g do

not function when playback is

stopped.

• You cannot use i/g to

go from the last track on the

disc to the first track.

• Using j/h or i/g

during Dual Playback will only

affect MP3 files. If you want to

skip JPEG files during Dual

Playback, press s or B.

To select a single digit track number: Press 0

first. (If the total track number is more than 9 and less

than 100, press 0 once. If the total track number is more

than 99, press 0 twice. )Then enter the track number.

To select 2 digit track number:

•

- If the disc contains more than 9 and less than 100

tracks (total track number is 2 digit), enter the

track number directly.

- If the disc contains more than 99 tracks (total track

number is 3 digit), press 0 first.Then enter the

track number. Or enter the track number, then

press ENTER at the last.

To select 3 digit track number: Enter the track

number directly.

T3221UB_EN2 4/20/06 9:31 PM Page 62

DVD

62 Paused and Step-by-Step Playback, Resume On

Paused Playback

STANDBY-ON

OPEN/CLOSE

Step-by-Step Playback

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CLEAR

+100

+10

REC MODE

REC

During disc playback, press PAUSE F.

PLAY

Playback will pause and the sound will be mute.

● Pressing PAUSE F once during Dual Playback will

STOP

SLOW

PAUSE

TITLE

pause a JPEG file only. Pressing PAUSE F one more

time will pause an MP3 playback.

RETURN

1-2

Press PAUSE k repeatedly to see a DVD or

ENTER

Video CD picture advance one frame (or step)

DISC

SET-UP

at a time. The sound will remain mute.

Pressing PAUSE k repeatedly during Audio CD, MP3,

Windows Media Audio or JPEG playback will have

no effect.

Press PLAY B to resume playback.

STANDBY-ON

OPEN/CLOSE

Resume On

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CLEAR

+100

+10

REC MODE

REC

Press STOP C during playback. In a few seconds,

PLAY

the following Resume message will appear on the TV

screen.

STOP

SLOW

PAUSE

TITLE

For DVD, VideoCD

or AudioCD:

For MP3,Windows

RETURN

Media Audio or JPEG:

ENTER

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

Press 'PLAY' to play from the

beginning of current track.

To play the beginning,

DISC

SET-UP

press 'STOP' first and then 'PLAY'.

Press PLAY B. In a few seconds, playback will

resume from the point at which it stopped last.

You can resume playing at the same point even if you

turn off the TV/VCR/DVD, then turn it on again later.

However, opening the disc tray will cancel the

Resume feature. Playback will start at the beginning

the next time you insert the disc.

For MP3,Windows Media Audio and JPEG, the

Helpful Hint

playback will resume from the beginning of the

current track.

To cancel the Resume feature, press STOP C again

while playback is stopped.

The resume information will be saved even when the

power is turned off.

• Set STILL MODE to FIELD in

the Display menu if paused

images are blurry. Details are

on pages 76-77.

T3221UB_EN2 4/20/06 9:31 PM Page 63

DVD

Repeat, A-B Repeat 63

PLAY

Repeat

STOP

SLOW

PAUSE

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.The green DVD light will

appear on the front of the TV/VCR/DVD.

RETURN

TITLE

ENTER

During disc playback, press MODE repeatedly

until the Repeat menu appears in the information bar

DISC

SET-UP

at the top of the screen.

OFF (REPEAT)

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

Press ▲ or ▼ repeatedly to change the repeat

mode.

MUTE

DISPLAY

● Select CHAPTER, TITLE or OFF for DVDs.

● SelectTRACK, ALL (all tracks on the disc) or OFF

for VCDs without PBC function or Audio CDs.

● SelectTRACK, GROUP (all tracks in the current

PLAY

STOP

SLOW

PAUSE

TITLE

folder), ALL or OFF for MP3,Windows Media

Audio or JPEG files.

RETURN

Selecting a new track, chapter or title will cancel

Repeat Playback.

● During Programmed Playback, Repeat setting will be

effective for the tracks in the program.

2-4

1,4

ENTER

DISC

SET-UP

A-B Repeat

PICTURE

/SLEEP

Follow these steps to play a section of a DVD, Video CD or

Audio CD repeatedly.

CH.

VOL.

SELECT

MODE

During disc playback, press MODE repeatedly

MUTE

DISPLAY

until the A-B Repeat menu appears in the information

bar at the top of the screen.

OFF (A-B REPEAT)

Helpful Hints

Play the disc up to the point where you want to

• Repeat and A-B Repeat are

not available with some discs.

• A-B Repeat is not available

set the start point, then press ENTER to set the

starting point (A). If you make a mistake, press

CLEAR. This will erase point A and let you start over.

OFF will appear briefly on the TV screen.

with MP3,Windows Media

Audio and JPEG playback.

• The entire A-B Repeat section

must be within a single title or

track. If you do not enter

Point B before the end of the

track or title is reached, the

end of the track or title will

become Point B automatically.

• Stopping playback will cancel

A-B Repeat.

A – (A-B REPEAT)

Play the disc up to the point where you want

to set the end point, then press ENTER again.

Within a few seconds, the section will begin to play.

The segment will play over and over until you cancel

the A-B Repeat feature.

• If you choose GROUP Repeat

during Dual Playback, all tracks

or files in each folder will play

repeatedly. For example if you

choose GROUP Repeat during

Dual Playback of MP3 folder A

and JPEG folder B, all MP3

tracks in folder A and all JPEG

files in folder B will be

A–B (A-B REPEAT)

To cancel A-B Repeat Playback, press MODE

repeatedly until

ENTER so

A-B appears. Press

OFF appears on theTV screen.

repeated.

Regular playback will resume.

T3221UB_EN2 4/21/06 4:35 PM Page 64

DVD

64 Markers

Marker Setting/Marker Search

STANDBY-ON

OPEN/CLOSE

You can put marks on your favorite playback points and can

easily call them back later during playback.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CLEAR

+100

+10

REC MODE

REC

During disc playback, press MODE repeatedly

until the Search menu appears in the information bar

PLAY

at the top of the screen.

STOP

SLOW

PAUSE

TITLE

_/17 (SEARCH)

RETURN

ENTER

Press ▲ or ▼ repeatedly until the Marker

2-5

DISC

SET-UP

information appears in the information bar.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Example: DVD

Within 1 minute, press s or B to select a

Marker (1-10). Make sure _ _ _ _ :_ _ :_ _ appears

beneath the number.

Let the disc playback to the point at which you

want to set the Marker (up to 60 seconds away).

When the disc reaches the point you want to

remember, press ENTER. The title or track

number and its elapsed playing time will appear

beneath the markers.

A checkmark will replace the Marker number.

The Marker information will disappear in about 1

minute. Otherwise press RETURN.

Helpful Hints

• Opening the disc tray,

switching to TV/VCR mode, or

turning off the TV/VCR/DVD

will erase all the Markers.

• To erase a single Marker,

repeat steps 1 and 2. Press

s or B to select a Marker.

Press CLEAR. Press RETURN

to remove the information

bar.

Example: DVD

Example: VideoCD

or Audio CD

To search for a specific Marker, repeat steps 1

and 2. Press s or B to choose the Marker you

want. Press ENTER. The playback will start from

the selected point.

To erase all the Markers,

select AC (All Clear), then

press ENTER.

T3221UB_EN2 4/20/06 9:31 PM Page 65

DVD

Subtitles, Camera Angles 65

Subtitles

STANDBY-ON

OPEN/CLOSE

You can select a language for DVD subtitles during playback.

You may select only the subtitles that are available on the DVD.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CLEAR

+100

+10

During disc playback, press MODE repeatedly

until the Subtitle menu appears in the information bar

at the top of the screen.

REC MODE

REC

PLAY

OFF (SUBTITLE)

STOP

SLOW

PAUSE

TITLE

RETURN

Press ▲ or ▼ repeatedly to change the

language.

ENTER

The number of available languages is displayed at the

right of the current subtitle language. In the example

below, six languages are available ( /6). After a few

seconds, the subtitles will appear.

When no subtitles are available, “NOT AVAILABLE”

will appear in the information bar.

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

(SUBTITLE)

MUTE

DISPLAY

Example: English as first of

six available subtitles

Camera Angles

Some DVDs contain scenes recorded from different angles.

The camera angle will not change if the DVD does not

contain sequences recorded from different perspectives.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

During disc playback, press MODE repeatedly

Helpful Hints

• With some DVDs, you must

select a subtitle language in

the Disc menu.

until the Angle menu appears in the information bar at

the top of the screen.

1 / 8 (ANGLE)

• If the desired language does

not appear after pressing

K or L several times, the disc

does not have subtitles in that

language.

• Opening the disc tray will

cancel your subtitle setting.

• If the Angle Icon setting is on,

will appear on the TV

Press ▲ or ▼ repeatedly to change the angle.

The number of available angles are displayed at the

right of the current angle. In this example, eight angles

are available ( /8).

3 / 8 (ANGLE)

screen when the current

portion of the disc has

multiple camera angles.

To set the Angle Icon on or

off, see pages 82-83.

Example:Angle 3 of eight

available angles

T3221UB_EN2 4/20/06 9:31 PM Page 66

DVD

66 Audio Language, Stereo Sound

Audio Language

STANDBY-ON

OPEN/CLOSE

You can select a language for DVDs during playback if

multiple languages are available.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CLEAR

+100

+10

During disc playback, press MODE repeatedly

REC MODE

REC

until the Audio Language menu appears in the

information bar at the top of the screen.

PLAY

1.ENG Dolby D 3/2.1ch 48k/3

STOP

SLOW

PAUSE

TITLE

RETURN

Example: English Audio

ENTER

Press ▲ or ▼ repeatedly to change the

language. The new audio will be heard. The

information bar will disappear after about 1 minute.

The Audio information may include the current

settings for the Dolby Digital or Multi-channel sound,

if they are available on the disc, and the sampling rate

of the disc. The number of available languages are

displayed at the right end of the information bar ( /3,

for example).

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Stereo Sound

Adjust Stereo Sound to determine whether you will hear the

left channel, the right channel or both channels (stereo)

during Video CD or Audio CD playback.

During disc playback, press MODE repeatedly

until the Stereo menu appears in the

information bar at the top of the screen. Press

▲ or ▼ to change the stereo setting.

The setting will change in the order illustrated

below. The information bar will disappear in about 1

minute.

STEREO (AUDIO)

Both right and left channels

are heard (stereo).

L-ch (AUDIO)

Only the left channel is heard.

Helpful Hints

• If a language is not available

after pressing K or L several

times, the DVD does not have

that language.

• Some DVDs only let you

change the language in the

Disc menu.

R-ch (AUDIO)

Only the right channel is heard.

• Audio languages may be

abbreviated (such as ENG for

English). Or, 3 dashes (- - -)

may appear instead of an

abbreviation.

Press RETURN to remove the information bar.

T3221UB_EN2 4/20/06 9:31 PM Page 67

DVD

Slow Motion, Zoom 67

PLAY

Slow Motion

STOP

SLOW

PAUSE

TITLE

Press PAUSE F during DVD orVideo CD

RETURN

playback.

Press and hold j/h or i/g for a few

seconds. Slow Motion Playback will begin. Press

j/h or i/g repeatedly to play the DVD

forward or backward at approximately 1/16, 1/8 or

1/2 the normal speed. Reverse slow motion is not

available on aVideo CD.

ENTER

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

1 (1/16),

2 (1/8) or

3 (1/2) will appear

SELECT

MODE

briefly on the TV screen to indicate Slow Forward

Playback.

MUTE

DISPLAY

1 (1/16),

2 (1/8) or

3 (1/2) will

indicate Slow Reverse Playback.

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

Example: Playing a DVD forward

at half the normal speed.

ENTER

2-3

DISC

SET-UP

Press PLAY B to return to normal playback.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Zoom

Zooming lets you enlarge the playback image of DVDs,Video

CDs or JPEG CDs, and lets you pan through the enlarged image.

During disc playback, press MODE repeatedly

Helpful Hints

until

OFF (ZOOM) appears in the infor-

• The sound will be mute during

Slow Motion Playback.

mation bar at the top of the screen.

Press ENTER repeatedly to change the zoom

factor. Each press of ENTER will change the

factor as shown below.

• The gray box with an inner blue

box that shows during Zoomed

Playback is the position guide.

Position guide stays on the

screen while the information

bar is shown. To remove it or

show it, press ENTER after the

information bar disappears. Or

remove the information bar by

pressing RETURN, then press

ENTER. The position of the

blue box inside the gray box

indicates the position of the

zoomed image within the

overall picture.

OFF (ZOOM)

ZOOM

Zoom OFF

Zoom x1.3

Zoom x2

Zoom x4

Press ▲, ▼, s or B to move the zoomed

image up, down, left or right.

Position guide example:

The Zoomed area is in

the top portion of the

overall picture.

• The x4 zooming is not active

with some discs. x1. 3 and x2

zooming is available forVideo

CDs. Only x2 zooming is

available for JPEGs.

• Position guide is not available

for JPEG playback.

● Available zoom factor for each media.

For DVDs:

x1.3 zoom (ZOOM 1)

x2 zoom (ZOOM 2)

x4 zoom (ZOOM 3)

ForVideo CDs: x1.3 zoom (ZOOM 1)

x2 zoom (ZOOM 2)

x2 zoom (ZOOM 1)

For JPEG files:

T3221UB_EN2 4/20/06 9:31 PM Page 68

DVD

68 Random Playback, Program Playback

Random Playback

STANDBY-ON

OPEN/CLOSE

You may play the tracks / files in Random order instead of the

order in which they are recorded (1, 2, 3...).

● Before you begin, press SELECT to put the TV/VCR/DVD

in DVD mode.The green DVD light will appear on the front of

the TV/VCR/DVD.

While playback is stopped, press MODE

repeatedly until the RANDOM screen appears.

CLEAR

+100

+10

REC MODE

REC

CD-DA

TOTAL 1:03:30

PLAY

STOP

SLOW

PAUSE

TITLE

PLAY

RETURN

Example:Audio CD

ENTER

Press PLAY B. The tracks will play in random order.

After all the tracks have played once, playback will stop.

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

Program Playback

SELECT

MODE

You may determine the order in which the tracks / files will play.To

set a program, follow these steps.

MUTE

DISPLAY

● Before you begin, press SELECT to put theTV/VCR/DVD in

DVD mode.The green DVD light will appear on the front of the

TV/VCR/DVD.

While playback is stopped, press MODE

repeatedly until the PROGRAM screen appears.

Press ▲ or ▼ to select a track you want to play,

then press ENTER.

CD-DA

TOTAL 1:03:30

3:30

4:30

5:00

3:10

5:10

1:30

2:30

3:30

5:10

10 4:20

11 3:00

12 3:20

17 4:10

22 2:50

2/3

Helpful Hints

ENTER

1/4

PLAY

CLEAR

3:30

• You cannot use the Number

buttons to select another track

while playing a program. Press

j/h or i/g to select

other tracks in the program.

• You cannot combine Random

Playback with Programmed

Playback.

• You cannot alter a program

during playback.

• You can start Program Playback

only while in the PROGRAM

screen.

Example:Audio CD

Press CLEAR to erase the last track in the program if you

make an error.

Additional tracks may be on other screens. press

to go

on to the next page, and press

ous page.

to go back to the previ-

Repeat this step until you have selected all the tracks you

wish to play in the program.

To see tracks in a program when there are more than

eight tracks, use j/h and

i/g to see all the

tracks.

For MP3,Windows Media Audio or JPEG folders, press

s or B to go to the previous or next level of folders.

Press TITLE to return to the first item in the highest level.

• A program can have a maximum

of 99 tracks.

• To erase all tracks in the

program, select ALL CLEAR at

step 2.

Press PLAY B. The tracks will play once in the order you

set.Turning off theTV/VCR/DVD or opening the disc tray

3 _{will erase the program. You can start Program Playback only}

• Program/Random Playback of

MP3,Windows Media Audio or

while in the PROGRAM screen.

JPEG tracks is not available while

Dual Playback is on.

T3221UB_EN2 4/21/06 4:26 PM Page 69

DVD

MP3/Windows Media Audio/JPEG Playback 69

The DVD player will play MP3,Windows Media Audio and

STANDBY-ON

OPEN/CLOSE

JPEG files that you record and finalize on a CD-R (Compact

Disc-Recordable) or CD-RW (Compact Disc-Rewritable).

● You cannot make or record such discs using this unit. See

your computer manual for details on making or recording

such discs. Keep the characteristics listed below in mind

when making discs.

● Record MP3 files at a sampling frequency of 44.1 kHz or 48

kHz. Record in a constant bit rate between 32 kbps and

320 kbps.

CLEAR

+100

+10

REC MODE

REC

● RecordWindows Media Audio files at a sampling

PLAY

frequency of 44.1 kHz or 48 kHz. Record in a constant bit

rate between 48 kbps and 192 kbps.

STOP

SLOW

PAUSE

TITLE

● When recording JPEG files, the size of the picture should

be between 32 x 32 and 6300 x 5100 dots.

2,5

3-4

RETURN

To play the files from the file list follow the steps below.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

ENTER

DISC

SET-UP

Load a CD-R or CD-RW with MP3,Windows Media

Audio or JPEG files.The first file in the file list will

1 _{start to play automatically.}

Helpful Hints

• MP3 tracks,Windows Media

Audio tracks and JPEG images

are known as files. Groups of

files are called folders.

Press DISC MENU to call up the file list during

playback. Or press STOP C twice to stop the

2 _{playback. (File list will appear whenever the playback}

is stopped completely.)

• Folders have the

icon.

Press K or L to select a folder or a file.

• MP3 files have the icon.

• JPEG files have the icon.

• A maximum of 255 folders can

be recognized. A maximum of

999 files can be recognized.

• During playback, press the

Number buttons to select

another track. Or, press

If you choose a track or file, press PLAY B or

ENTER. Starting with the track or file you selected,

4 _{the tracks/files will play in the order they were}

recorded, i.e. 1, 2, 3.

If you select a folder and press ENTER, the

tracks or files within that folder will appear.

Press K or L to select the track or file you

want, then press PLAY B or ENTER

j/h or i/g to

change tracks. If a track is not

available, “X” may appear on

the TV screen, and playback

may resume at an incorrect

track or may continue with its

current track.

• Specific Time Playback is not

possible with MP3 and

Windows Media Audio files.

● Press TITLE to return to the first item in the

highest level of folders or files.

● Press { or B to return to previous or next levels.

● To change the TRANSITION MODE of JPEG

playback, press MODE repeatedly during playback

until FADE IN/OUT or CUT IN/OUT appears.

Then press K or L to switch CUT IN/OUT and

FADE IN/OUT. If you choose CUT IN/OUT, the

images will cut in and out sharply as playback

progresses. If you choose FADE IN/OUT, the

images will fade in and out as playback progresses.

• Progressive JPEGs (JPEG files

saved in the progressive

format) will not play on this

TV/VCR/DVD.

●

To change the size of the playback image, press MODE

repeatedly until

appears at the top of theTV

screen during playback. Then press ENTER to switch

between NORMAL(100%) and SMALL(95%).

• Copyright protected

● To remove the On-Screen Display, press RETURN.

● During JPEG playback, press K or L to rotate a

picture 90 degrees counter-clockwise or clockwise.

Windows Media Audio files

will not play on this

TV/VCR/DVD.

To stop playback, press STOP C.

• High resolution JPEG files

takes longer to be displayed.

• SIZE CHANGE MODE may

have no effect on some files

(e.g. files with a small picture size).

T3221UB_EN2 4/20/06 9:31 PM Page 70

DVD

70 Dual Playback, Folder Playback

Dual Playback

PLAY

This feature lets you play MP3 and JPEG files simultaneously.

Available only when Dual Playback is on.

See pages 82-83 on how to set the Dual Playback on or off.

STOP

SLOW

PAUSE

TITLE

RETURN

Press SELECT to put the DVD/VCR in DVD

ENTER

mode.

DISC

SET-UP

DVD light will appear on the front of the DVD/VCR.

PICTURE

/SLEEP

CH.

VOL.

Press DISC MENU during MP3 (or JPEG)

playback.

A File Llist will appear.

SELECT

MODE

MUTE

DISPLAY

Press or to select a desired JPEG (or

MP3) file you want to play simultaneously from

the List.Then press PLAY B or ENTER.

Dual playback will start.

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

To stop playback, press STOP C.

ENTER

DISC

SET-UP

Folder Playback

You may select to play a folder.

PICTURE

/SLEEP

CH.

VOL.

Available only when Dual Playback is on.

See pages 82-83 on how to set the Dual Playback on or off.

SELECT

MODE

MUTE

DISPLAY

Press SELECT to put the DVD/VCR in DVD

mode.

Helpful Hints

DVD light will appear on the front of the

DVD/VCR.

• If you press PLAY B directly

after you inserted a disc which

contains both MP3 and JPEG

files and if the Dual Playback

setting is on, Dual Playback will

start automatically.

While playback is stopped, press MODE.

A Folder List will appear.

Press K or L to select a folder, then press

• If you play only MP3 file while

Dual Playback Setting on, you

will have a black background.

This is not a malfunction.

PLAY B or ENTER.

● MP3 and JPEG files in the selected folder will play

simultaneously.

• You can not play Windows

FOLDER LIST

DISC NAME

Media Audio and JPEG files

FOLDER

001

002

003

ALL

together at the same time. If

you choose a Windows Media

Audio file during Dual Playback,

ENTER

PLAY

001

only Windows Media Audio

file will play.

• Zooming or rotating a JPEG file

during Dual Playback may cause

an intermittent sound.

● IfWindows Media Audio files are in the folder,

those files will be skipped during Folder Playback.

• Dual Playback may not function

properly if MP3 and JPEG files

on the disc interfere each other

due to the difference in their

data size.

T3221UB_EN2 4/20/06 9:31 PM Page 71

DVD

On-Screen Displays 71

DVD Display

STANDBY-ON

OPEN/CLOSE

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

Press DISPLAY repeatedly to show the

following information on the screen during

DVD playback.

CLEAR

+100

+10

7/49 0:01:46 -0:03:27

REC MODE

REC

CH (chapter):

Elapsed playing time

of the current chapter;

remaining playing time

of the current chapter

Current chapter number/

total chapters

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

1/2 0:00:00 -1:23:45

TT (title):

Current title number/

total titles

Elapsed playing time of the

current title; remaining playing

time of the current title

ENTER

DISC

SET-UP

BIT RATE: The amount of audio and

video data currently being read.

PICTURE

/SLEEP

CH.

VOL.

C L0

SELECT

MODE

Layer number, appears

only when playing a two-

layered disc.

L0: Layer 0 is playing

L1: Layer 1 is playing

MUTE

DISPLAY

1-2

Current Repeat setting, if active

C: Chapter repeat

T: Title repeat

B: A-B repeat

Press DISPLAY repeatedly or press RETURN

to remove the information from the screen.

Video CD and Audio CD Display

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

Press DISPLAY repeatedly to show the

following information on the screen during

Video CD (without PBC) or Audio CD

playback.

4/12 0:03:21 -0:02:15

TR (track):

Current track number/

total tracks

Elapsed playing time

of the current track;

remaining playing time

of the current track

4/12 0:13:45 -0:45:40

Current Repeat setting, if active

T: Track repeat

A: All tracks repeat

ALL:

Current track number/

total tracks

B: A-B repeat

Elapsed playing time

of the current CD;

remaining playing time of

the current CD

Press DISPLAY repeatedly or press RETURN to

remove the information from the screen.

T3221UB_EN2 4/21/06 7:17 PM Page 72

DVD

72 On-Screen Displays (cont’d)

MP3/Windows Media Audio/JPEG Displays

STANDBY-ON

OPEN/CLOSE

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

Press DISPLAY until the current track or file

information appears.

During Windows Media™ Audio

CLEAR

+100

+10

playback

During JPEG playback

REC MODE

REC

JPEG file name

track name

PLAY

STOP

SLOW

PAUSE

TITLE

During MP3 playback

RETURN

MP3 file name

title name

ENTER

DISC

SET-UP

● If Dual Playback is on, MP3

file name will be displayed

after JPEG file name.

artist name

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

1-2

2/25 0:01:15

Current repeat setting

TR (track):

Current track number/

total tracks

Elapsed playing time

of the current track

(for MP3/

Windows Media™ Audio

only)

Example: MP3 playback

The following may appear to indicate Repeat Playback.

T: The current track will play repeatedly.

G: Tracks in the current folder (group) will play

repeatedly.

A: All tracks will play repeatedly.

PROGRAM

only during PROGRAM Playback

RANDOM

only during RANDOM Playback

FOLDER PLAYBACK

Helpful Hint

• For MP3/Windows Media

Audio files recorded in

Variable Bit Rate (VBR), the

elapsed time displayed on the

screen may vary from the

actual elapsed time.

only during FOLDER Playback

● Program and Random Playback is available only when

Dual Playback is off.

● Folder Playback is available only when Dual Playback

is on.

Press DISPLAY again to remove the display.

T3221UB_EN2 4/20/06 9:31 PM Page 73

DVD

Black Level, Virtual Surround, Initializing 73

Black Level

STANDBY-ON

OPEN/CLOSE

Adjust Black Level to brighten the DVD and Video CD picture

during playback.

During disc playback, press MODE repeatedly

until the Black Level menu appears in the information

1 _{bar at the top of the screen.}

OFF (BLACK LEVEL)

CLEAR

+100

+10

REC MODE

REC

Within 1 minute, press K or

to switch ON or

PLAY

OFF. ON brightens the dark parts of the picture. OFF

2 _{shows the original picture as recorded.}

STOP

SLOW

PAUSE

TITLE

RETURN

Virtual Surround

You can enjoy improved stereo sound when you play DVDs,

ENTER

Video CDs, Audio CDs, MP3 orWindows Media Audio files

DISC

SET-UP

recorded in Dolby Digital or Pulse Code Modulation (PCM).

Check the disc case for details on availability.

During disc playback, press MODE repeatedly

until theVirtual Surround menu appears in the

PICTURE

/SLEEP

CH.

VOL.

1 _{information bar at the top of the screen.}

SELECT

MODE

OFF (V.S.S)

MUTE

DISPLAY

While the information bar is on the screen,

press K or

to choose 1 (Natural), 2

2 _{(Emphasized) or OFF.}

The default setting is OFF.

The information bar will disappear after about 1 minute.

Initializing

You can return all the DVD player’s Setup menu items (except

for PARENTAL) to their default settings.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the unit.

While playback is stopped, press SET-UP twice.

PLAY

The QUICK SETUP screen appears.

STOP

SLOW

PAUSE

TITLE

RETURN

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

ENTER

2,3

DISC

SET-UP

Press s or B to select INIT. (INITIALIZE) at

1,4

the top of the menu, then press ENTER.

INITIALIZE

Initialize?

YES

ENTER

Helpful Hints

• ForVideo CDs and Audio

CDs, you can adjustVirtual

Surround only if you set

Press or to selectYES.Then, press ENTER

twice. To cancel, select NO instead.

Stereo Sound to STEREO.

Details are on page 66.

INITIALIZE

Initialize?

• The Black Level andVirtual

Surround settings will be saved

even if the player is turned off.

YES

ENTER

Press SET-UP to remove the menu.

T3221UB_EN2 4/20/06 9:31 PM Page 74

DVD

74 Language Settings

You can use the LANGUAGE settings to select different languages for the

Audio or Subtitles of DVDs, as well as languages for DVD Disc menus.

STANDBY-ON

OPEN/CLOSE

● Before you begin, press SELECT to put the TV/VCR/DVD in

DVD mode. The green DVD light will appear on the front of the

TV/VCR/DVD.

Press SET-UP once so the MAIN MENU appears.

– MAIN MENU –

B TIMER PROGRAMMING

SETTING CLOCK

CLEAR

+100

+10

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

REC MODE

REC

PLAY

STOP

SLOW

PAUSE

TITLE

While playback is stopped, press SET-UP again.

RETURN

The QUICK SETUP screen appears.

QUICK SETUP

ENTER

3-5

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

DISC

SET-UP

ENTER

1-2

PICTURE

/SLEEP

CH.

VOL.

Press s or B to select CUSTOM at the top of the

menu, then press ENTER.

SELECT

MODE

MUTE

DISPLAY

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

(LANGUAGE) will be selected. Press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

Press K or L to select AUDIO, SUBTITLE or DISC

MENU. Then, press ENTER. The language options for the

5 _{selected item will appear.}

LANGUAGE

AUDIO

DISC MENU

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

ORIGINAL

ENGLISH

FRENCH

SPANISH

Helpful Hints

GERMAN

ITALIAN

ENTER

SWEDISH

DUTCH

SWEDISH

• If the DVD’s default settings

for Audio and Subtitle are the

same language, the subtitles

may not show unless you turn

them on.

AUDIO:

DISC MENU:

The DVD’s audio plays

in the selected language.

A DVD’s Disc menu appears

in the selected language.

• Use MODE to select Audio

and Subtitles available on the

DVD. Details are on pages 65-

66.

LANGUAGE

SUBTITLE

OFF

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

SWEDISH

ENTER

• If you set AUDIO to

ORIGINAL, the default setting

of the DVD Audio will play.

SUBTITLE:

Subtitles appear in the

selected language.

T3221UB_EN2 4/20/06 9:31 PM Page 75

DVD

Language Settings (cont’d) 75

Press K or L to select a language, then press

ENTER. The language lists may continue on multiple

STANDBY-ON

OPEN/CLOSE

screens. Press K or L to move to the other screens.

● If you select OTHER, press four Number buttons

to enter the code for the language you desire. Use

the Language Codes below. The language or

language code you select will appear in the

Language menu beside AUDIO, SUBTITLE or

DISC MENU.

CLEAR

+100

+10

REC MODE

REC

PLAY

LANGUAGE

LANGUAGE CODE

STOP

SLOW

PAUSE

TITLE

Please enter a 4-digit language code.

ENTER

RETURN

ENTER

● You can select other languages for AUDIO,

SUBTITLE and DISC MENU only if the language is

available on the disc. If the language is not

recorded on the DVD, changing these settings will

have no effect.

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

Press SET-UP to exit the menu.

MUTE

DISPLAY

Language Codes

A-B

English

5160 Kannada

5161 Kashmiri

5166 Kazakh

5760 Panjabi

6247

Abkhazian

4748 Esperanto

4747 Estonian

5765 Pashto

5757 Persian

6265 Tagalog

5247 Tajik

6258 Tamil

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

4752

F-H

Kinyarwanda 6469 Polish

6563 Faroese

4759 Fiji

4764 Finnish

5471 French

4765 Frisian

5261 Kirghiz

5256 Kirundi

5255 Korean

5264 Kurdish

5271

5771 Portuguese 6266 Tatar

6460 Pushto

5761 Quechua

6265 Telugu

6367 Thai

5767 Rhaeto-Romance 6459 Tibetan

L-N

Romanian

5861 Russian

5847

6461 Tigrinya

6467 Tonga

Tsonga

4771 Gaelic (Scots) 5350 Laothian

Azerbaijani 4772 Galician

5358 Latin

Bangla

4860 Georgian

4847 German

5167 Greek

5747 Latvian

5051 Lettish

5158 Lingala

5868

Turkish

Bashkir

Basque

Bengali

Bhutani

Bihari

5868 Samoan

5860 Sangho

5866 Sanskrit

6559 Turkmen

6553 Twi

6547

4860 Greenlandic 5758 Lithuanian

U-Z

5072 Guarani

4854 Gujarati

4855 Hausa

4864 Hebrew

4853 Hindi

5971 Hungarian

5360 Macedonian 5957 Serbian

5367 Malagasy

5447 Malay

6564 Ukrainian

5953 Serbo-Croatian 6554 Urdu

6757

6764

6772

Bislama

Breton

Bulgarian

Burmese

5965 Sesotho

5958 Setswana

5966 Shona

6566 Uzbek

6660 Vietnamese 6855

5569 Malayalam

5455 Maltese

5467 Maori

Marathi

5565 Moldavian

5560 Mongolian

5547 Nauru

5551 Nepali

6560 Volapuk

6550 Welsh

6555 Wolof

6565 Xhosa

6557 Yiddish

6558 Yoruba

6561 Zulu

5165

6861

4971

6961

7054

5655

7161

7267

5955 Sindhi

Byelorussian 4851

I-K

5964 Singhalese

5961 Siswat

5960 Slovak

6047 Slovenian

6051 Somali

C-E

Icelandic

Cambodian 5759 Indonesian

Catalan

Chinese

Corsican

Croatian

Czech

4947 Interlingua

7254 Interlingue

4961 Inupiak

5464 Irish

4965 Italian

5047 Japanese

6058 Javanese

5557 Norwegian 6061 Spanish

5347

O-R

Sundanese

6149 Swahili

6164 Swedish

6567

5566 Occitan

5647 Oriya

6569

Danish

Dutch

6568

5669 Oromo (Afan) 6159

T3221UB_EN2 4/20/06 9:31 PM Page 76

DVD

76 Display Settings

You can change the TV Aspect ratio and still mode clarity in

the Display menu.

STANDBY-ON

OPEN/CLOSE

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

Press SET-UP once so the MAIN MENU

CLEAR

+100

+10

appears.

REC MODE

REC

– MAIN MENU –

B TIMER PROGRAMMING

SETTING CLOCK

USER'S SET UP

PLAY

LANGUAGE [ENGLISH]

ZERO RETURN

STOP

SLOW

PAUSE

TITLE

RETURN

While playback is stopped, press SET-UP again.

ENTER

3-4

The QUICK SETUP screen will appear.

DISC

SET-UP

1-2

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

PICTURE

/SLEEP

CH.

VOL.

ENTER

SELECT

MODE

MUTE

DISPLAY

Press s or B to select CUSTOM at the top of

the menu, then press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

Press s or B to select

press ENTER.

(DISPLAY), then

DISPLAY

TV MODE

STILL MODE

4:3 LETTER BOX

AUTO

ENTER

Helpful Hints

• Selecting a different TV MODE

setting is only effective if it is

available on the DVD. Check

the DVD Disc menu or case

for details.

• You also can adjust TV MODE

in the QUICK SETUP menu.

With QUICK selected, press

ENTER. TV MODE will be

selected, so press ENTER.

Press K or L to choose a

setting, then press ENTER.

Press SET-UP to remove the

menu.

T3221UB_EN2 4/20/06 9:31 PM Page 77

DVD

Display Settings (cont’d) 77

Press

to select an item, then press

ENTER.

STANDBY-ON

OPEN/CLOSE

● If you selectedTV MODE, press K or L to

select a setting, then press ENTER.

Choose 4:3 LETTER BOX if you want to see the

entire, widened picture with black bars at the top

and bottom of the screen. This looks like the

picture you see when watching movies in a theater.

This setting is possible only if the DVD was

CLEAR

+100

+10

REC MODE

REC

recorded in the letterbox or widescreen format.

Choose 4:3 PAN & SCAN for a full height picture,

with both sides trimmed. Some companies refer to

this as reformatting the picture to fit your TV

screen and may call it the regular or normal format.

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

DISPLAY

ENTER

TV MODE

4:3 LETTER BOX

4:3 PAN & SCAN

OFF

DISC

SET-UP

ENTER

PICTURE

/SLEEP

CH.

VOL.

TV MODE

SELECT

MODE

● If you selected STILL MODE, press K or L to

select a setting, then press ENTER.

MUTE

DISPLAY

This function allows you to adjust the quality of a still

image. AUTO is the default setting.

If you select FIELD, still images will be stabilized but

coarse due to the limited amount of data.

If you select FRAME, the picture quality will be

improved due to the simultaneous output of two field

data but the image can be unstabilized.

DISPLAY

STILL MODE

AUTO

FIELD

FRAME

ENTER

STILL MODE

Press SET-UP to exit the menu.

T3221UB_EN2 4/20/06 9:31 PM Page 78

DVD

78 Audio Settings

Change Audio settings based on other equipment you connected to

the TV/VCR/DVD or according to your disc sound features. These

settings only affect the Audio from the DVD player of the

TV/VCR/DVD.

STANDBY-ON

OPEN/CLOSE

● Before you begin, press SELECT to put the TV/VCR/DVD in

DVD mode. The green DVD light will appear on the front of the

TV/VCR/DVD.

Press SET-UP once so the MAIN MENU appears.

CLEAR

+100

+10

– MAIN MENU –

REC MODE

REC

B TIMER PROGRAMMING

SETTING CLOCK

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

While playback is stopped, press SET-UP again.

The QUICK SETUP screen will appear.

ENTER

3-6

DISC

SET-UP

1-2,

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

PICTURE

/SLEEP

CH.

VOL.

ENTER

SELECT

MODE

MUTE

DISPLAY

Press s or B to select CUSTOM at the top of

the menu, then press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

Press s or B to select

(AUDIO) , then press

ENTER.

Press K or L to select DRC, DOWN SAMPLING,

or DOLBY DIGITAL, then follow step 6 accordingly.

AUDIO

DRC

DOWN SAMPLING ON

DOLBY DIGITAL

BITSTREAM

ENTER

Helpful Hints

• Dolby Digital sound must be

available on the DVD.

DRC

• You can adjust DOLBY

DIGITAL in the QUICK

●

If you selected DRC, press ENTER repeatedly to turn Dynamic Range

Control (DRC) ON or OFF. Choosing ON compresses the range of

volume by suppressing loud sounds and raising low sounds. DRC is

available only on discs recorded in the Dolby Digital format.

If you selected DOWN SAMPLING, press ENTER repeatedly to choose

ON or OFF. ON sets downsampling to 48 kHz. OFF sets downsampling

to 96 kHz. DOWN SAMPLING is available only when the unit is

connected to a Stereo using the AUDIO OUT COAXIAL jack.

If you selected DOLBY DIGITAL, press ENTER repeatedly to select

BITSTREAM or PCM. Select BITSTREAM if you used the AUDIO OUT

COAXIAL jack to connect theTV/VCR/DVD to a stereo that is Dolby

Digital compatible. Details are on page 11. Otherwise, choose PCM.

SETUP menu. With QUICK

selected, press ENTER. Press

to select DOLBY DIGITAL.

Press ENTER to choose

BITSTREAM or PCM. Press

SET-UP to remove the menu.

• When you play a disc that has

downsampling will be at

48 kHz, even if DOWN

SAMPLING is OFF.

Press SET-UP to exit the menu.

T3221UB_EN2 4/20/06 9:31 PM Page 79

DVD

Parental Settings 79

The Parental feature prevents viewing of DVDs that exceed your rating limits.

This feature will not limit viewing if the DVD is not rated or coded. Check

your DVDs and settings before letting children access theTV/VCR/DVD.

Follow these steps to set the Parental Level.

STANDBY-ON

OPEN/CLOSE

● Before you begin, press SELECT to put theTV/VCR/DVD

in DVD mode. The green DVD light will appear on the front

of theTV/VCR/DVD.

Press SET-UP once so the MAIN MENU appears.

CLEAR

+100

+10

– MAIN MENU –

REC MODE

REC

B TIMER PROGRAMMING

SETTING CLOCK

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

While playback is stopped, press SET-UP again.

ENTER

3-4

QUICK SETUP

DISC

SET-UP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

1-2

ENTER

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

Press s or B to select CUSTOM at the top of the

menu, then press ENTER.

MUTE

DISPLAY

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

Press s or B to select

(PARENTAL),

then press ENTER.

● If this is the first time to access the Parental menu, proceed to

step A.

● If this is not the first time to access the Parental menu and you

had already set the password before, proceed to step B.

The display shown below will appear.

PARENTAL

PASSWORD

ENTER

Press the Number buttons to enter a 4-digit password.

The password will appear on the screen. Write it down so you

don’t forget it.

Press ENTER.The Parental menu will appear.

PARENTAL

PARENTAL LEVEL

ALL

PASSWORD CHANGE

ENTER

Proceed to step 5.

Instructions continue on the next page.

T3221UB_EN2 4/20/06 9:31 PM Page 80

DVD

80 Parental Settings (cont’d)

Instructions continued from the previous page.

The display shown below will appear.

STANDBY-ON

OPEN/CLOSE

PARENTAL

Enter current password.

ENTER

CLEAR

+100

+10

REC MODE

REC

Press the Number buttons to enter your current

4-digit password. Asterisks ( * ) will appear instead

of your password. This protects its identity. After

entering the password, the Parental menu will

appear.

PLAY

STOP

SLOW

PAUSE

TITLE

RETURN

5-6

PARENTAL

ENTER

PARENTAL LEVEL

PASSWORD CHANGE

ALL

DISC

SET-UP

ENTER

PICTURE

/SLEEP

CH.

VOL.

Proceed to step 5.

SELECT

MODE

Press ▲ or ▼ to select PARENTAL LEVEL,

then press ENTER.

MUTE

DISPLAY

RATING EXPLANATIONS

•

ALL - The Parental feature is

inactive; all discs can play.

8 [ADULT] - DVD softwares of any

grades (adult/general/children) can be

played back.

PARENTAL

PARENTAL LEVEL

ALL

8 [ADULT]

7 [NC-17]

6 [R]

5 [PGR]

4 [PG13]

3 [PG]

ENTER

•

7 [NC-17] - No one under 17 admitted

6 [R] - Restricted; under 17 requires

accompanying parent or adult guardian

5 [PGR] - Parental Guidance

Recommended

4 [PG13] - Unsuitable for children

under 13

Press ▲ or ▼ to select a level, then press

ENTER.

The previous menu will appear. The level you selected

will appear beside PARENTAL LEVEL. The rating

levels continue on two menu screens. Press ▲ or ▼

repeatedly to move to the next or previous screen to

find the rating level you want.

•

3 [PG] - Parental Guidance suggested

2 [G] - General Audience

1 [KID SAFE] - Suitable for children

Helpful Hints

Press SET-UP to exit the menu.

• When you try to play a DVD

whose rating exceeds the level

you set, an on-screen message

will indicate the DVD cannot

play. Remove the DVD, then

set PARENTAL LEVEL to ALL.

Reload the DVD and begin

playback. Some DVDs may let

you enter your 4-digit

password to begin playback.

Follow the on-screen

messages as prompted.

• You cannot use the default

password (4737) to play a DVD.

T3221UB_EN2 4/20/06 9:31 PM Page 81

DVD

Parental Settings (cont’d) 81

Changing the Parental Password

STANDBY-ON

OPEN/CLOSE

If you like to change the password, repeat 1-4B on

pages 79-80.

Press K or L to select PASSWORD CHANGE,

then press ENTER.

CLEAR

+100

+10

PARENTAL

REC MODE

REC

PASSWORD

PLAY

ENTER

STOP

SLOW

PAUSE

TITLE

RETURN

Press the Number buttons to enter a 4-digit

password. The password numbers will appear on the

screen. Write down the password so you will not forget

it. Press ENTER. The previous menu will reappear.

ENTER

DISC

SET-UP

2-3

Press SET-UP to exit the menu.

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

MUTE

DISPLAY

Helpful Hints

• The default password is 4737.

If you forget your password,

press Number buttons 4, 7, 3,

7 at step 4B on page 80.You

will be prompted to enter a

new 4-digit password. Use the

Number buttons to enter a

new 4-digit password, then

press ENTER. PARENTAL

LEVEL will reset to ALL. Press

SET-UP to remove the menu.

See pages 79-80 to reset

PARENTAL LEVEL as you

desire.

• A power failure will not erase

your password.

T3221UB_EN2 4/20/06 9:31 PM Page 82

DVD

82 Others

You may adjust the Angle Icon, Automatic Power Off,

Dual Playback and Slide Show settings.

STANDBY-ON

OPEN/CLOSE

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CLEAR

+100

+10

Press SET-UP once so the MAIN MENU

appears.

REC MODE

REC

– MAIN MENU –

PLAY

B TIMER PROGRAMMING

SETTING CLOCK

USER'S SET UP

STOP

SLOW

PAUSE

TITLE

LANGUAGE [ENGLISH]

ZERO RETURN

RETURN

ENTER

3-4

While playback is stopped, press SET-UP again.

DISC

SET-UP

The QUICK SETUP screen will appear.

1-2

PICTURE

/SLEEP

CH.

VOL.

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

SELECT

MODE

ENTER

MUTE

DISPLAY

Press s or B to select CUSTOM at the top of

the menu, then press ENTER.

LANGUAGE

AUDIO

ORIGINAL

OFF

SUBTITLE

DISC MENU

ENGLISH

ENTER

Press s or B to select

press ENTER.

(OTHERS), then

OTHERS

ANGLE ICON

OFF

5 sec

AUTO POWER OFF

DUAL PLAYBACK

SLIDE SHOW

ENTER

T3221UB_EN2 4/20/06 9:31 PM Page 83

DVD

Others (cont’d) 83

Press K or L to select an item, then press ENTER

STANDBY-ON

OPEN/CLOSE

●

If you selected ANGLE ICON, press ENTER

repeatedly to select ON or OFF. The default setting is

ON. Choose ON to see the Angle icon when multiple

camera angles are available during DVD playback. Details are

on page 65. Choose OFF to disable the Angle icon.

CLEAR

+100

+10

REC MODE

REC

OTHERS

ANGLE ICON

OFF

5 sec

AUTO POWER OFF

DUAL PLAYBACK

SLIDE SHOW

PLAY

ENTER

STOP

SLOW

PAUSE

TITLE

RETURN

ANGLE ICON

● If you selected AUTO POWER OFF, press ENTER

repeatedly to choose ON or OFF. The default setting

is ON. Choose ON if you want the player to turn off

when there is no activity at the player or its remote for

20 minutes.

ENTER

DISC

SET-UP

PICTURE

/SLEEP

CH.

VOL.

SELECT

MODE

OTHERS

ANGLE ICON

OFF

5 sec

AUTO POWER OFF

DUAL PLAYBACK

SLIDE SHOW

MUTE

DISPLAY

ENTER

AUTO POWER OFF

● If you selected DUAL PLAYBACK, press ENTER

to choose ON or OFF. This feature lets you play

MP3 and JPEG files simultaneously.

OTHERS

ANGLE ICON

5 sec

AUTO POWER OFF

DUAL PLAYBACK

SLIDE SHOW

ENTER

DUAL PLAYBACK

● If you selected SLIDE SHOW, press K or L to

choose 5 sec or 10 sec, then press ENTER. This

adjusts the playback speed of the SLIDE SHOW. The

default setting is 5 sec. Choose 5 sec to display each

image for 5 seconds. Choose 10 sec to display each image

for 10 seconds.

OTHERS

SLIDE SHOW

5 sec

10 sec

ENTER

SLIDE SHOW

Press SET-UP to exit the menu.

T3221UB_EN2 4/20/06 9:31 PM Page 84

84 Glossary

AUDIO In Jacks: red and white jacks on the front of the TV/VCR/DVD

which are used to receive or record audio from another source (VCR,

Camcorder, etc.).

Automatic Channel Setup: process in which the TV/VCR/DVD memorizes

all available TV channels. Then, when you push CH. ▲/▼, you only scan

through channels you receive.

Auxiliary (AUX): The channel to which you set your TV/VCR/DVD during

dubbing or when viewing material that is playing on another device that is

connected to the TV/VCR/DVD (for example, a Camcorder orVCR or TV

channels from a Cable Box/Satellite Receiver). Press SELECT to choose AUX

at the TV/VCR/DVD.

Bands: settings that allow you to tune channels.

• Antenna –VHF (very high frequency; channels 2-13) and UHF (ultra high

frequency; channels 14-69).

• Cable – standard channels can be received without a Cable Box.

Brightness: adjusting increases or decreases the brightness of the color on

the screen.

Digital AUDIO OUT COAXIAL Jack: Sends digital audio to a stereo,

allowing you to adjust the volume at the stereo.

Color: adjusting pales or brightens the TV/VCR/DVD picture color.

Dolby Digital: A surround sound system that provides Multi-channel sound

as used in movie theaters. Sound is heard through multiple channels, not just

the right and left as with standard stereo.

Dubbing: copying a videotape from a separateVCR or camcorder.

HQ: high quality; a feature in theVCR circuitry which provides enhanced

videotape picture detail through the TV/VCR/DVD.

OTR: One-Touch Recording; a timed recording that starts immediately and

records for 30 minutes to 8 hours, whichever you specify.

Sharpness: adjusting softens or clarifies the picture on the screen.

Tape Speeds: how fast the videotape travels during playback or recording.

The faster the tape speed, the better the recording quality will be. Faster

speeds (SP) also use more space on the tape. So, you can put more recording

on a tape if you use a slower tape speed (SLP).

• SP (Standard Playback) – fastest tape speed (recording time for a T120 tape

is approximately 2 hours); best picture quality.

• LP (Long Playback) – average tape speed; only playback in this speed is

available on this TV/VCR/DVD.

• SLP (Super Long Playback) – slowest tape speed (recording time for a

T120 tape is approximately 6 hours).

Tint: adjusting changes the tints of the picture from purple to green.

VIDEO In Jack: yellow jack on the front of the TV/VCR/DVD which is used

to receive or record video from another source (VCR, Camcorder, etc.).

T3221UB_EN2 4/20/06 9:31 PM Page 85

Helpful Hints 85

If you are having problems with your product, check this list of problems and possible solutions before

requesting service. You may be able to solve the problem yourself.

Location

For safe operation and satisfactory performance of your TV/VCR/DVD, remember the following:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of

the TV/VCR/DVD. Do not place the TV/VCR/DVD on a carpet, as this will block the ventilation openings.

• Avoid locations subject to strong vibrations.

• Do not place the TV/VCR/DVD near strong magnetic fields.

• Do not move the TV/VCR/DVD from a cold place to a hot place, or vice versa.

Electrical Shock and Fire Hazards

• Do not handle the power cord with wet hands.

• Do not pull the power cord when disconnecting the TV/VCR/DVD from the AC (alternating current)

wall outlet. Grasp it by the plug.

• If you spill water on the TV/VCR/DVD, unplug the power cord immediately and take the TV/VCR/DVD

to an authorized service center.

• Do not put your fingers or objects into the cassette compartment or disc tray.

• Do not place anything on top of the TV/VCR/DVD.

Dew Warning (Moisture Condensation)

• Moisture may condense inside the unit when you move it from a cold place to a warm place, after

heating a cold room, or when the humidity is high. There is no warning that moisture is in your

TV/VCR/DVD. Playing a tape when moisture has accumulated could damage the tape and the

TV/VCR/DVD. If you suspect moisture inside the TV/VCR/DVD, keep the power on (but do not play a

tape) for at least 2 hours. This will allow the TV/VCR/DVD to dry.

TV/VCR/DVD will not perform a timer recording.

• Set the recording start and stop times correctly. Details are on pages 31-34.

Midnight is 12 a.m. Noon is 12 p.m.

• Make sure the TV/VCR/DVD power is off for the timer recording.

• Set the clock. Details are on pages 21-24.

• Put a videotape in the cassette compartment of the TV/VCR/DVD. The tape must have a record tab.

Details are on page 8.

• If the power fails, timer recordings will be restored when you reset the clock. Timer recordings do not

occur if set to take place during the power failure.

TV/VCR/DVD will not record on a videotape.

• Make sure the videotape has a record tab. Details are on page 8.

• Plug the power cord into an active AC outlet. Details are on page 10.

• Check your hookups. Details are on pages 9-10.

• Set up the TV channels. Details are on page 19.

• You cannot record DVDs onto a videotape using the TV/VCR/DVD.

Channel reception is poor.

• Check connections, then set up the channels again. Details are on page 19.

TV/VCR/DVD has no power.

• Connect the power plug to an AC (alternating current) outlet completely.

TV/VCR/DVD ejects the tape when you try to start a recording.

• Make sure the tape has a record tab. Details are on page 8.

T3221UB_EN2 4/20/06 9:31 PM Page 86

86 Helpful Hints (cont’d)

Disc cannot play.

• Insert a playable disc. Make sure the disc is labelled for Region 1 or ALL regions and is NTSC compatible.

Details are on page 7.

• Place the disc correctly in the disc tray. If the disc is one-sided, place the disc in the tray with the label facing

up. If the disc is two-sided, make sure the label of the side you want to play is facing up.

• Clean the disc. Make sure the disc is not scratched or warped.

• Cancel the Parental Controls, enter the password, or change the Parental level. Details are on pages 79-80.

TV/VCR/DVD does not have a picture.

• Adjust the antenna or check the CableTV or satellite signal connection. If using a Cable Box/Satellite Receiver,

set theTV/VCR/DVD to channel 3, 4 or AUX. Details are on pages 9-10.

• Adjust the picture controls. Details are on page 28.

• Select an activeTV channel. Details are on pages 19-20.

• Make sure the disc is compatible with the DVD player of theTV/VCR/DVD. Details are on page 7.

TV/VCR/DVD has poor sound or no sound.

• PressVOL. X/Y to adjust the volume. Press MUTE to restore the volume.

• Check the audio settings for DVD mode. Details are on page 78.

• Check the audio settings of the disc. For example, you may have selected “soundtrack” playback or an

unavailable sound setting (such as Dolby Digital) or language. Details are on pages 66, 74-75 and 78. Try other

sound options provided in the DVD Disc menu.

You cannot choose a DVD feature, such as camera angle or audio or subtitle language.

• The feature must be recorded on the DVD. Not all DVDs contain multiple angles, subtitles, etc. Refer to the

disc case to see what features are available. If the feature is not available, the “X” may appear in the top right

corner of the screen.

Videotape playback is poor or the tape is destroyed.

• Adjust the tracking. Details are on page 43.

• Use the Rental feature. Details are on page 38.

• If moisture has accumulated in the unit, keep the power on for at least 2 hours, but do not play a tape.

TV/VCR/DVD does not display closed captions forTV programs.

• Make sure closed captioning is available for the program. Refer to theTV listings in your local newspaper.

Remote control does not operate theTV/VCR/DVD.

• Aim the remote control directly at the remote sensor on the front of theTV/VCR/DVD.

Details are on page 14.

• Remove all obstacles between the remote control and theTV/VCR/DVD.

• Inspect and replace the batteries in the remote control. Details are on page 8.

Number buttons will not select channels above 69.

• Enter channel numbers as a 2-digit number. If you want to select channels 100 and above, press the +100/+10

button, then the Number buttons for the last 2 digits. Details are on page 13.

• If you are using an antenna and do not have CableTV/Satellite, only channels 2-69 will be available.

You cannot insert a tape into the cassette compartment of theTV/VCR/DVD.

• Insert the tape with the window facing up and the record tab facing you and on the left.

• Make sure a tape isn’t already inside by pressing STOP/EJECT

A on the front of theTV/VCR/DVD.

• Gently push on the center of the tape. Never force a tape into theTV/VCR/DVD.

• If you have set a timer recording and the power is off, the unit will eject the tape if the record tab is missing.

You cannot remove the tape from theTV/VCR/DVD.

• Make sure the power plug is completely connected to an AC (alternating current) outlet.

• If a timer recording is programmed, turn on theTV/VCR/DVD power, then eject the tape. Be sure to insert a

tape and turn off theTV/VCR/DVD power for the timer recording.

• Unplug theTV/VCR/DVD power cord for 5 minutes. Then, plug in the power cord again, then press

STANDBY-ONy on theTV/VCR/DVD. If the tape does not eject, press STOP/EJECT

A on the

TV/VCR/DVD three to five times. If the tape still does not eject, an authorized servicer may need to remove

the tape.

T3221UB_EN2 4/20/06 9:31 PM Page 87

Specifications 87

GeneralTV/VCR

CRT:

Electrical Specifications

29 inch in-line gun

90˚ deflection tube

Sound output:

Two speakers, 1W, 8 ohm

Other Specifications

Closed Caption system: 15.119/FCC

Terminals

Video Heads:

Tape width:

Tape speeds

Rotary four-head

1/2 inch

Antenna In:

VHF/UHF/Cable TV/DTV

75 ohm unbalanced (F-type)

One RCA connector

Two RCA connectors

1/8” stereo (3.5 mm)

Video In:

33.40 mm/sec.

11.12 mm/sec.

2-69

Audio L/R In:

Headphone:

Coaxial Digital

Audio Out:

SLP

Tuner channels:

Cable TV:

DTV

1-125

2-69

One pin jack,

500mVpp (75 ohm)

Operating

temperature:

41ºF-104ºF (5ºC-40ºC)

General DVD

Color System:

NTSC

Power requirements: AC 120V, 60Hz

Power consumption

(Maximum):

Dimensions:

145W

Height: 25.4” (644 mm)

Width: 26.7” (677.3 mm)

Depth: 20.3” (515.1 mm)

86.2 lbs. (39.2 kg)

Weight:

Designs and specifications are subject to change without notice and without our legal obligation.

T3221UB_EN2 4/20/06 9:31 PM Page 88

88 Limited Warranty

PHILIPS LIMITED WARRANTY

NINETY (90) DAY LABOR / ONE (1) PARTS / TWO (2) YEAR DISPLAY

WARRANTY COVERAGE:

PHILIPS warranty obligation is limited to the terms set forth

below.

This warranty does not apply (a) to damage caused by accident,

abuse, misuse, misapplication, or non-Philips product, (b) to

damage caused by service performed by anyone other than

Philips or Philips Authorized Service Location, (c) to a product

or a part that has been modified without the written permis-

sion of Philips, or (d) if any Philips serial number has been

removed or defaced, or (e) product, accessories or consum-

ables sold “AS IS” without warranty of any kind by including

refurbished Philips product sold “AS IS” by some retailers.

WHO IS COVERED:

Philips warrants the product to the original purchaser or the

person receiving the product as a gift against defects in materi-

als and workmanship as based on the date of original purchase

(“Warranty Period”) from an Authorized Dealer. The original

sales receipt showing the product name and the purchase date

from an authorized retailer is considered such proof.

This Limited Warranty does not cover:

•

Shipping charges to return defective product to Philips.

Labor charges for installation or setup of the product, adjust-

ment of customer controls on the product, and installation

or repair of antenna systems outside of the product.

Product repair and/or part replacement because of improper

installation, connections to improper voltage supply, abuse,

neglect, misuse, accident, unauthorized repair or other cause

not within the control of Philips.

WHAT IS COVERED:

The Philips warranty covers new products if a defect arises and

a valid claim is received by Philips within the Warranty Period.

At its option, Philips will either (1) repair the product at no

charge, using new or refurbished replacement parts, or (2)

exchange the product with a product that is new or which has

been manufactured from new, or serviceable used parts and is

at least functionally equivalent or most comparable to the origi-

nal product in Philips current inventory, or (3) refund the origi-

nal purchase price of the product.

•

Damage or claims for products not being available for use, or

for lost data or lost software.

•

Damage occurring to product during shipping.

A product that requires modification or adaptation to enable

it to operate in any country other than the country for

which it was designed, manufactured, approved and/or

authorized, or repair of products damaged by these modifica-

tions.

Philips warrants replacement products or parts provided under

this warranty against defects in materials and workmanship

from the date of the replacement or repair for ninety (90) days

or for the remaining portion of the original product’s warranty,

whichever provides longer coverage for you. When a product

or part is exchanged, any replacement item becomes your

property and the replaced item becomes Philips’ property.

When a refund is given, your product becomes Philips’ proper-

ty.

•

A product used for commercial or institutional purposes

(including but not limited to rental purposes).

Product lost in shipment and no signature verification receipt

can be provided.

Note: Any product sold and identified as refurbished or

renewed carries a ninety (90) day limited warranty.

Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO

RICO, OR U.S. VIRGIN ISLANDS…

Contact Philips Customer Care Center at:

1-888-PHILIPS (1-888-744-5477)

Replacement product can only be sent if all warranty

requirements are met. Failure to follow all require-

ments can result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND LIM-

ITATIONS:

TO OBTAIN ASSISTANCE IN CANADA…

1-800-661-6162 (French Speaking)

1-888-PHILIPS (1-888-744-5477) - (English or Spanish

Speaking)

This Limited Warranty applies only to the new products manu-

factured by or for Philips that can be identified by the trade-

mark, trade name, or logo affixed to it. This Limited Warranty

does not apply to any non-Philips hardware product or any

software, even if packaged or sold with the product. Non-

Philips manufacturers, suppliers, or publishers may provide a

separate warranty for their own products packaged with the

bundled product.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-

SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-

TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF

ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-

UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICA-

BLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILI-

Philips is not liable for any damage to or loss of any programs,

data, or other information stored on any media contained with- TY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS

in the product, or any non-Philips product or part not covered

by this warranty. Recovery or reinstallation of programs, data

or other information is not covered under this Limited

Warranty.

PRODUCT IS LIMITED IN DURATION TO THE DURATION

OF THIS WARRANTY.

Some states do not allow the exclusions or limitation of inci-

dental or consequential damages, or allow limitations on how

long an implied warranty lasts, so the above limitations or

exclusions may not apply to you.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

Philips, P.O. Box 671539, Marietta, GA. 30006-0026

3121 233 48811

T3221UB_EN2 4/20/06 9:31 PM Page 89

Index 89

a-b repeat . . . . . . . . . . . . . . . . . .63 language (dvd) . . . . . . . . . .66, 74-75 second audio program . . . . . .55-57

ant(enna) jack . . . . . . . . . . .9-10, 15 language (setup menus) . . . . . . . .19 select button . . . . . . . . . . . . . . . .12

arrow buttons . . . . . . . . . . . . . . .12 language settings . . . . . . . . . . .74-75 setup button . . . . . . . . . . . . . .6, 13

audio cd . . . . . . . . . . . . . . . . . . . . .7 lp (long playback) . . . . . . . . . .29, 84 sharpness . . . . . . . . . . . . . . . . . . .28

audio in/out jacks . . . . . . .10, 14, 36

sleep timer . . . . . . . . . . . . . . . . . .39

audio out coaxial jack . . . . . .11, 15 menus . . . . . . . . . . . . . . . . .6, 19, 58 slow motion . . . . . . . . . . . . . .42, 67

audio settings (dvd) . . . . . . . . . . .78 mode button . . . . . . . . . .13, 68, 73 slp (super long playback) . . . .29, 84

auto return . . . . . . . . . . . . . . . . .35 mp3 display . . . . . . . . . . . . . . . . .72 source button . . . . . . . . . . . . . . .14

automatic rewind, eject . . . . . . . .43 mp3 playback . . . . . . . . . . . . . . . .69 sp (standard playback) . . . . . .29, 84

auxiliary mode (aux) . . .9-10, 16, 36, 84 mp3 track selection . . . . . . . . . . .69 specifications . . . . . . . . . . . . . . . .87

mts system . . . . . . . . . . . . . . .55-57 standby-ony button . . . . . . .12, 14

batteries . . . . . . . . . . . . . . . . . . . . .8 mute button . . . . . . . . . . . . . . . .13 status display . . . . . . . . . . .27, 71-72

black level . . . . . . . . . . . . . . . . . .73

stereo broadcast recording . .55-57

brightness . . . . . . . . . . . . . . . . . .28 number buttons . . . . . . . . . . . . . .13 still picture . . . . . . . . . . . . . . .42, 62

stop C button . . . . . . . . . . . . . . .12

camera angle . . . . . . . . . . . . . . . .65 on-screen status displays . .27, 71-72 stop/eject C /A button . . . . .14, 17

cassette compartment . . . . . . . . .14 one-touch recording . . . . . . . . . .30 super high speed searching . . . . .42

channel

above 100 . . . . . . . . . . . . .13, 61

open/close A button . . . . . . .12, 14

table of contents . . . . . . . . . . . . . .5

adding/deleting . . . . . . . . . . . .20 parental controls . . . . . . . . . .79-81 tape duplication . . . . . . . . . . . . . .36

setup . . . . . . . . . . . . . . . . . . . .19 password . . . . . . . . . . . . . . . . . . .81 tape eject . . . . . . . . . . . . . . . .14, 86

o/p buttons . . . . .12, 14, 16, 43 pause k button . . . . .12, 42, 62, 67 tape speed . . . . . . . . . . . . . . .29, 84

chapters . . . . . . . . . . . . . . . . . . . .60 picture controls . . . . . . . . . . . . . .28 time search . . . . . . . . . . . . . . . . .40

clear button . . . . . . . . . . .13, 34, 39 play B button . . . . . . .12, 14, 17-18 time setting . . . . . . . . . . . . . . .21-24

clock setting . . . . . . . . . . . . . .21-24 playing discs . . . . . . . . . . . . . . . . .18 timer recording

closed captions . . . . . . . . . . . .44-47 playing videotapes . . . . . . . . . . . .17

color . . . . . . . . . . . . . . . . . . . . . .28 power cord . . . . . . . . . . . . . .10, 15

connections . . . . . . . . . . . . .9-11, 36 programs . . . . . . . . . . . . . . . . . . .68

contents, table of . . . . . . . . . . . . . .5

cancelling . . . . . . . . . . . . . . . . .34

checking . . . . . . . . . . . . . . . . .34

setting . . . . . . . . . . . . . . . .31-33

tint . . . . . . . . . . . . . . . . . . . . . . . .28

contrast . . . . . . . . . . . . . . . . . . . .28 random playback . . . . . . . . . . . . .68 title button . . . . . . . . . . . . . . .13, 58

controls ratings

titles . . . . . . . . . . . . . . . . . . . . . . .58

remote . . . . . . . . . . . . . . . .12-13

tv/vcr/dvd . . . . . . . . . . . . . . . .14

mpaa . . . . . . . . . . . . . . . . . . . .52 tracking . . . . . . . . . . . . . . . . . . . .43

tv . . . . . . . . . . . . . . . . . . . .48-51 tracks . . . . . . . . . . . . . . . . . . . . . .61

counter . . . . . . . . . . . . . . . . .27, 39 rear panel . . . . . . . . . . . . . . . . . .15 vcr/tv light . . . . . . . . . . . . . . . . . .14

rec mode button . . . . . . . . . .12, 29 v-chip setup . . . . . . . . . . . . . .48-53

daylight-savings time . . . . . . . . . . .25 rec I button . . . . . . . . . . . . .12, 29 video in/out jacks . . . . . . .10, 14, 36

disc menu button . . . . . . . . . .12, 58 recording

virtual surround . . . . . . . . . . . . . .73

disc tray . . . . . . . . . . . . . . . . .14, 18

display button . . . . . . .13, 27, 71-72

display settings . . . . . . . . . . . .76-77

basic . . . . . . . . . . . . . . . . . . . .29 volume

one-touch . . . . . . . . . . . . . . . .30

timer . . . . . . . . . . . . . . . . .31-34 warranty . . . . . . . . . . . . . . . . . . .88

buttons . . . . . . .12, 14

duplication . . . . . . . . . . . . . . . . . .36 rec/otr I button . . . . . . . . . . . . .14

dvd light . . . . . . . . . . . . . . . . . . . .14 rec/otr light . . . . . . . . . . . . . . . . .14

dvd video . . . . . . . . . . . . . . . . . . . .7 remote control

Windows Media Audio display . . . . .72

Windows Media Audio playback . . . .69

buttons . . . . . . . . . . . . . . .12-13 zero return . . . . . . . . . . . . . . . . .39

using . . . . . . . . . . . . . . . . . . . . .8

ejecting a tape . . . . . . . . . . . .14, 86

enter button . . . . . . . . . . . . . . . .13 remote sensor . . . . . . . . . . . . . . .14

repeat playback . . . . . . . . . . .37, 63

fast forward search . . . . . . . .42, 59 rerecording . . . . . . . . . . . . . . . . .36

front panel . . . . . . . . . . . . . . . . . .14 resuming playback . . . . . . . . . . . .62

return button . . . . . . . . . . . . . . . .13

glossary . . . . . . . . . . . . . . . . . . . .84 reverse searching . . . . . . . . . .42, 59

rf coaxial cable . . . . . . . . . . . . . . . .9

headphone jack . . . . . . . . . . . . . .14

helpful hints . . . . . . . . . . . . . .85-86 safety precautions . . . . . . . . . . . . .4

hookups . . . . . . . . . . . . . . .9-11, 36 searching . . . . . . . . . . . . . . . .42, 59

T3221UB_EN2 4/20/06 9:31 PM Page 90

90 MEMO

T3221UB_EN2 4/20/06 9:31 PM Page 91

MEMO 91

T3221UB_EN2 4/20/06 9:31 PM Page 92

PHILIPS CONSUMER ELECTRONICS

A Division of Philips Electronics North America Corp

P. O. Box 671539 Marietta, GA 30006 0026

Meet Philips at the Internet

http://www.philips.com/usasupport

27PC4326/37

CLASS 1

LASER PRODUCT

8239 300 47411

Printed In Malaysia

JpnCN-0606/37-3

1EMN21840

T3221UB * * * * *

HP Hewlett Packard ProLiant ML110 G5 User Manual
Insignia NS 1DRVCR User Manual
JVC AV 20NT11 User Manual
Kuppersbusch USA GKS 11742 0 35 F UL User Manual
Miele KM5948 User Manual
Moffat Bakbar Turbofan E35 User Manual
NEC MultiSync LCD4020 LCD4620 User Manual
Nortel Networks 2033 User Manual
Pelco Computer Monitor PMCL417 User Manual
Philips 28HW6505 User Manual