Register your product and get support at
21PT9470/44
21PT9470/55
EN User manual
Screen care
Disposal of your old product and
batteries
•
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and color fading,
wipe off water drops as soon as possible.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
•
•
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
•
•
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
2
EN
a
(Power)
2 Your product
•
•
Switches the TV to standby if it is on.
Switches on the TV if it is in standby.
b Close caption
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
Displays closed captions settings.
c AV
Selects connected devices.
d Stereo
Switches Stereo and Nicam Stereo to
Mono.
Product overview
e INCR. SURR.
This section gives you an overview of
commonly used controls and functions.
Not used.
f A/CH
Toggles between the current channel and
the last viewed channel.
Remote control
1
g MENU
22
21
2
Toggles the main menu on or off.
3
h
i
(Navigation buttons)
Navigates menus.
20
19
4
5
6
SMART (Smart picture)
Cycles through pre-defined picture
settings.
18
7
8
j
MUTE
Mutes or restores audio output.
9
17
k CH +/- (Channel +/-)
Switches to the next or previous channel.
10
11
l 0-9 (Numeric buttons)
16
15
Selects a channel or setting.
m Not used.
n Not used.
12
13
o
OSD
Displays program information, if available.
p VOL +/- (Volume +/-)
14
Increases or decreases volume.
q
SMART (Smart Sound)
Cycles through pre-defined sound
settings.
r Not used.
EN
3
s SLEEP
Sets a delay after which the TV switches
to standby.
Back connectors
t TIMER
Sets the timers.
u Not used.
v SAP
Selects Secondary Audio Program (SAP),
stereo or mono.
Controls and indicators
POWER
-
VOLUME
+
CHANNEL
a TV ANTENNA
Signal input from an antenna, cable or
satellite.
a
b c
d
e
b MONITOR OUT
Audio and video output to analog devices
such as another TV or a recording device.
a
: Switches the product on or off.
c AV IN (VIDEO and AUDIO L/R)
Analog audio and video input from analog
or digital devices such as DVD players,
satellite receivers and VCRs.
b Standby indicator
c Remote control sensor
d -/+ : Increases or decreases volume.
d Component Video Input (YPbPr)
Video input from analog devices such as
DVD, receiver, game console, etc. This
connector is used with audio input.
e
/
: Switches to the next or previous
channel.
4
EN
Side connectors
a VIDEO IN
Composite video input from analog
devices such as VCRs.
b AUDIO IN L/R
Audio input from analog devices
connected to VIDEO.
EN
5
Connect a video recorder:
3 Get started
Connect devices
This section describes how to connect various
devices with different connectors.
Note
• Different types of connectors may be used to
connect a device to your TV, depending on
availability and your needs.
Connect devices
Connect a video recorder and a set-top box:
Connect a video player:
Insert remote control
batteries
6
EN
4 Install channels
Automatically install channels
This section describes how to search and store
channels automatically.
Note
• Make sure the TV is in TV mode.
1 Press MENU.
2 Select [Install] > [Auto Program].
3 Press to start auto search.
4 Press MENU to exit and return to the
previous menu.
Manually install channels
This section describes how to search and store
analogTV channels manually.
Note
• Make sure the TV is in TV mode.
1 Press MENU.
2 Select [Install] > [Manual] > [Channel
No.].
3 Press
or the numeric buttons to key
in the channel number.
4 Press to select [Color System]. Press
to select your desired color system.
5 Press to select [Fine Tune]. Press
to
adjust.
6 Press to select [Store?]. Press
to
to
select [Stored].
7 Press to select [Skipped]. Press
select [On] to skip channel.
8 Press MENU to exit and return to the
previous menu.
EN
7
Switch channels
5 Use your
product
This section helps you perform basic operations
(see ‘Use more of your product’ on page 9).
Switch yourTV on/off or to
standby
•
•
Press CH +/- on the remote control or
at the front of the TV.
Enter a channel number using the
/
To switch on
•
If the standby indicator is off, press at
the front of the TV.
Numeric buttons.
•
If the standby indicator is red, press on
the remote control.
To switch to standby
Watch connected devices
•
Press on the remote control.
» The standby indicator switches to red.
Use the source button
To switch off
Press at the front of the TV.
•
» The standby indicator switches off.
Press AV repeatedly to cycle through the
various sources.
Tip
AdjustTV volume
• Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
To increase or decrease volume
•
•
•
•
Press VOL +/-.
Press +/- at the front of the TV.
Press to mute the sound.
Press again to restore the sound.
8
EN
Change picture and sound
settings
6 Use more of
your product
Change picture and sound settings to suit your
preferences.You can apply pre-defined settings
or change settings manually.
AccessTV menus
Use smart picture
Menus help you to install channels, change
picture and sound settings and access other
features.
Use smart picture to apply pre-defined
picture settings.
1 Press MENU.
» The menu screen appears.
MAIN
Picture
Sound
Brightness
Color
1 Press SMART repeatedly to cycle
through the four settings.
•
[Personal]Settings are set to your
preference.
Features
Install
Contrast
Sharpness
•
[Soft]Emphasizes warm colours. This
setting is suitable for dimly lit rooms.
[Natural]Emphasizes original colors.
[Rich]Emphasizes vibrant colours.
This setting is the optimal setting
when you are viewing TV
Color Temp
Contrast +
•
•
programmes in a brightly lit room.
2 Press the
to select and navigate
through one of the following menus.
2 Press to exit.
•
[Picture]Adjusts the picture setting
for optimal viewing.
Manually adjust picture settings
•
•
•
[Sound]Adjusts the sound setting.
[Features]Accesses features.
[Install]Selects the channel
installation menu.
1 Press MENU.
2 Press the navigation buttons to enter the
[Picture] menu.
3 Press OK to confirm your choice.
3 Press
to select from the following
settings and adjust:
•
[Brightness]Adjusts the intensity and
details of dark areas.
•
•
[Color]Adjusts color saturation.
[Contrast]Adjusts the intensity of
bright areas, keeping dark areas
unchanged.
•
[Sharpness]Adjusts the level of
sharpness in image details.
EN
9
•
•
[Color Temp]Introduces more
orange tones or blue tones to the
picture.
[Contrast +]Optimizes the total
contrast for improved picture quality.
Use timers
You can set timers to switch theTV to standby
at a specified time.
Set the time
Use smart sound
1 Press MENU.
Use smart sound to apply pre-defined sound
settings.
2 Select [Features] > [Timer] > [Time].
3 Press the numeric buttons to set the
time.
4 Press to exit.
Set timer options
1 Press SMART repeatedly to cycle
1 Press MENU.
through the four settings.
•
•
•
•
[Personal]Settings are set to your
preference.
[Voice]Emphasizes high tones (treble
boosted).
[Theater]Emphasizes sensation to
action (bass and treble boosted).
[Music]Emphasizes low tones (bass
boosted).
2 Select [Features] > [Timer].
3 Press
to select from the following
options and adjust:
•
[Start Time]Sets the time for the TV
to turn on from standby.
[Start Channel]Sets the channel
when the TV is turned on from
standby.
•
2 Press to exit.
•
•
[Switch Time]Sets a time for the TV
to switch to another channel.
[Switch Channel]Sets a channel
to switch to when the TV is
programmed to switch to another
channel.
[Stop Time]Sets a time for the TV to
switch off.
[Activate]Activates the timer.
Adjust sound settings
1 Press MENU
2 Press the navigation buttons to enter the
•
•
[Sound] menu.
3 Press
to select from the following
settings and adjust:
4 Press to exit.
•
•
•
[Treble]Adjusts the treble level.
[Bass]Adjusts the bass level.
[Balance]Adjusts the balance of the
right and left speakers to best suit
your listening position.
•
[System]Sets system sound.
10 EN
Picture issues
7 Troubleshooting
TheTV is on, but there is no picture:
•
Check that the antenna is properly
connected to the TV.
Check that the correct device is selected
as the TV source.
This section describes commonly encountered
issues and accompanying solutions.
•
There is sound but no picture:
GeneralTV issues
•
Check that the picture settings are
correctly set.
TheTV does not switch on:
There is poorTV reception from an antenna
connection:
•
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
•
Check that the antenna is properly
connected to the TV.
•
Check that the power cable is securely
connected.
•
Loud speakers, unearthed audio devices,
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor,
fine tune this channel.
The remote control is not working properly:
•
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
•
•
Replace the remote control batteries if
they are flat or weak.
Clean the remote control and TV sensor
lens.
•
There is poor picture quality from connected
devices:
The standby light on theTV blinks red:
•
Check that the devices are connected
properly.
•
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
•
Check that the picture settings are
correctly set.
TheTV menu is in the wrong language.
•
Change the TV menu to your preferred
language.
When turning theTV on/off/to standby, you
hear a creaking sound from theTV chassis:
•
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools and warms up. This
does not impact performance.
EN 11
Sound issues
There is picture but no sound from theTV:
•
Check that all cables are properly
connected.
•
•
Check that the volume is not set to 0.
Check that the sound is not muted.
There is picture but sound quality is poor:
•
Check that the sound settings are
correctly set.
There is picture but sound comes from one
speaker only:
•
Verify that sound balance is set to the
center.
Contact us
If you cannot resolve your problem, refer to
support.
If the problem remains unresolved, contact
Philips Consumer Care in your country.
Warning
• Do not attempt to repair the TV yourself. This
may cause severe injury, irreparable damage to
your TV or void your warranty.
Note
• Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
12 EN
8 Product
information
Product information is subject to change
without notice. For detailed product
Picture
Diagonal screen size: 53cm
Visible diagonal screen size: 51cm
Tuner/Reception/
Transmission
•
•
•
Antenna input: 75ohm coaxial
TV system: PAL-M, PAL-N, NTSC-M
Video playback: NTSC, PAL
Remote control
•
Batteries: 2 x AAA (LR03 type)
Connections
•
•
•
•
•
CVI
CVBS In
Monitor Out
Antenna
Side CVBS In
Power
•
•
•
Mains power: AC 110-240V, 50-60Hz
Power consumption: 74W
Standby power: < 3W
EN 13
Compliance with EMF
9 Notice
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers,
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
2010 © Koninklijke Philips Electronics N.V.All
rights reserved.
Specifications are subject to change without
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips confirms that if its products are
handled properly for their intended use, they
are safe to use according to scientific evidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
Philips cannot be held responsible neither for
any errors in the content of this document
nor for any problems as a result of the content
in this document. Errors reported to Philips
will be adapted and published on the Philips
support website as soon as possible.
Copyright
All other registered and unregistered
trademarks are the property of their respective
owners.
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and official repair shops. Failure
to do so shall void any warranty, stated or
implied.
Any operation expressly prohibited in
this manual, any adjustments, or assembly
procedures not recommended or authorised in
this manual shall void the warranty.
14 EN
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: 0700-21SL9001-00
|