Screen care
•
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
•
•
•
•
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,
wipe off water drops as soon as possible.
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
a
(Standby-On)
Switches the TV to standby if it is on.
Switches on the TV if it is in standby.
2 Your product
•
•
b Not used.
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
c
INFO
Displays program information, if available.
d Not used.
INCR. SURR
e
Enables Incredible Surround for stereo sources.
Product overview
Enables spatial mode for mono sources.
This section gives you an overview of
commonly used controls and functions.
f Not used.
g
(Navigation buttons)
Navigates through the menus.
Remote control
h
SMART (Smart picture)
Cycles through pre-defined picture
settings.
1
2
i
(Mute)
Mutes or restores audio output.
19
18
17
3
4
5
j CH +/- (Channel +/-)
Switches to the next or previous channel.
k 0-9 (Numeric buttons)
Selects a channel or setting.
6
7
l A/CH (Alternate channel)
Toggles between the current channel and
the last viewed channel.
8
9
16
m AV
Selects connected devices.
15
14
n DUAL
10
Switches from Stereo to Mono.
o VOL +/- (Volume +/-)
Increases or decreases volume.
11
12
p
SMART (Smart Sound)
Cycles through pre-defined sound
settings.
13
q MENU
Toggles the main menu on or off.
r Not used.
s
TIMER
Sets the timers.
c AV IN (VIDEO and AUDIO L/R)
Analog audio and video input from
analog or digital devices such as DVD
players, satellite receivers and VCRs.
Controls and indicators
d Component Video Input (YPbPr)
Video input from analog devices such
as DVD, receiver, game console, etc.This
connector is used with audio input.
POWER
-
VOLUME
+
CHANNEL
a
b c
d
e
a
: Switches the product on or off.
Side connectors
b Standby indicator
c Remote control sensor
d -/+ : Increases or decreases volume.
e
/
: Switches to the next or previous
channel.
Back connectors
a VIDEO IN
Composite video input from analog
devices such as VCRs.
b AUDIO IN L/R
Audio input from analog devices
connected to VIDEO IN.
a TV ANTENNA
Signal input from an antenna, cable or
satellite.
b MONITOR OUT
Audio and video output to analog devices
such as another TV or a recording device.
Connect a video player:
3 Get started
This section describes how to connect various
devices with different connectors.
Connect devices
Note
• Different types of connectors may be used to
connect a device to your TV, depending on
availability and your needs.
Connect a video recorder:
Insert remote control batteries
Connect a video recorder and a set-top box:
3 Press
system.
4 Press to select [SOUND SYS].
5 Press to select your desired sound
system.
to select your desired colour
4 Install channels
Automatically install channels.
6 Press to exit.
Note
• Make sure the TV is in TV mode. Press AV
repeatedly until the channel number appears.
Fine tune channels
1 Press MENU.
1 Press MENU.
2 Select [INSTALL] > [MANUAL STORE]
2 Select [INSTALL] > [AUTO STORE].
3 Press to start auto search.
4 Press MENU to exit.
> [FINE TUNE].
3 Press
to adjust.
4 Press to exit.
Manually install channels
Skip or edit channels
Note
1 Press MENU.
• Make sure the TV is in TV mode. Press AV
repeatedly until the channel number appears.
2 Select [INSTALL] > [MANUAL STORE]
> [SKIP].
3 Select [ON] to skip channel.
1 Press MENU.
4 Press to exit.
2 Select [INSTALL] > [MANUAL STORE]
> [CHANNEL].
Swap channels
3 Press the numeric buttons to key in the
channel number.
1 Press MENU.
4 Press to select [SEARCH].
5 Press to start manual search.
6 Press MENU to exit.
2 Select [INSTALL] > [CH SWAP] >
[FROM].
3 Press
in the channel number.
4 Press to select [TO].
5 Press or the numeric buttons to key
in the channel number.
6 Press to select [EXCHANGE].
7 Press to exchange the progams of
the two channels.
8 Press to exit.
or the numeric buttons to key
Select the colour and sound
system
1 Press MENU.
2 Select [INSTALL] > [MANUAL STORE]
> [COLOUR SYS].
Switch channels
5 Use your
product
This section helps you perform basic operations
(see ‘Use more of your product’).
Switch yourTV on/off or to
standby
•
•
Press CH +/- on the remote control or
at the front of the TV.
Enter a channel number using the
/
To switch on
•
If the standby indicator is off, press at
the front of the TV.
Numeric buttons.
•
If the standby indicator is red, press on
the remote control.
To switch to standby
Watch connected devices
•
Press on the remote control.
» The standby indicator switches to red.
Use the source button
To switch off
Press at the front of the TV.
•
» The standby indicator switches off.
Press AV repeatedly to cycle through the
various sources.
Tip
AdjustTV volume
• Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
To increase or decrease volume
•
•
Press VOL +/-.
Press +/- at the front of the TV.
To mute or unmute sound
•
•
Press to mute the sound.
Press again to restore the sound.
Use smart picture
6 Use more of
your product
Use smart picture to apply pre-defined
picture settings.
AccessTV menus
Menus help you to install channels, change
picture and sound settings and access other
features.
1 Press SMART repeatedly to cycle
through the four settings.
•
[PERSONAL] Settings are set to
your preference.
1 Press MENU.
» The menu screen appears.
•
[SOFT] Emphasises warm colours.
This setting is suitable for dimly lit
rooms.
•
•
[NATURAL] Emphasises original
colours.
[RICH] Emphasises very vibrant
colours. This setting is the optimal
setting when you are viewing TV
programs in brightly lit rooms.
MAIN
PICTURE
SOUND
BRIGHTNESS
COLOUR
FEATURES
INSTALL
CONTRAST
SHARPNESS
2 Press to exit.
COLOURTEMP
CONTRAST +
Manually adjust picture settings
1 Press MENU.
2 Press the navigation buttons to enter the
[PICTURE] menu.
2 Press the
to select and navigate
through one of the following menus.
3 Press
to select from the following
settings and adjust:
•
[PICTURE] Adjusts the picture
setting for optimal viewing.
[SOUND] Adjusts the sound setting.
[FEATURES] Accesses features.
[INSTALL] Selects the channel
installation menu.
•
•
•
[BRIGHTNESS] Adjusts the intensity
and details of dark areas.
[COLOUR] Adjusts colour
saturation.
[CONTRAST] Adjusts the intensity
of bright areas, keeping dark areas
unchanged.
•
•
•
3 Press MENU to return to the previous
•
•
[SHARPNESS] Adjusts the level of
sharpness in image details.
[COLOUR TEMP] Introduces more
orange tones or blue tones to the
picture.
menu.
Change picture and sound
settings
•
[CONTRAST +] Select ON to
optimise the total contrast for
improved picture quality.
Change picture and sound settings to suit your
preferences.You can apply pre-defined settings
or change settings manually.
Use smart sound
3 Press
confirm.
4 Press
to confirm.
to set the hour and press to
Use smart sound to apply pre-defined sound
settings.
to set the minutes and press
5 Press MENU to exit.
Set timer options
1 Press MENU.
1 Press SMART repeatedly to cycle
through the four settings.
2 Select [FEATURES] > [TIMER].
•
•
•
•
[PERSONAL] Settings are set to
your preference.
[VOICE] Emphasises high tones
(treble boosted).
[THEATRE] Emphasises sensation to
action (bass and treble boosted).
[MUSIC] Emphasises low tones (bass
boosted).
3 Press
to select from the following
options and adjust:
•
[ON TIME] Sets the time for the TV
to turn on from standby.
[ON CHANNEL] Sets the channel
when the TV is turned on from
standby.
•
•
•
[OFF TIME] Sets a time for the TV
to switch off.
[SLEEP TIME] Sets a delay in
minutes after which the TV is
switched to standby.
2 Press to exit.
Adjust sound settings
1 Press MENU
•
•
[CH SWITCH] Sets a time for the
TV to switch to another channel.
[SWITCH TO] Sets a channel
to switch to when the TV is
programmed to switch to another
channel.
2 Press the navigation buttons to enter the
[SOUND] menu.
3 Press
to select from the following
settings and adjust:
•
•
•
[TREBLE] Adjusts the treble level.
[BASS] Adjusts the bass level.
[BALANCE] Adjusts the balance of
the right and left speakers to best
suit your listening position.
[SURROUND] Enables spatial
sound.
4 Press MENU to exit.
•
Use timers
You can set timers to switch theTV on or
switch to standby at a specified time.
Set the time
1 Press MENU.
2 Select [FEATURES] > [TIMER] >
[CLOCK].
•
•
Loud speakers, unearthed audio devices,
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor,
fine tune this channel.
7 Troubleshooting
This section describes commonly encountered
issues and accompanying solutions.
There is poor picture quality from connected
devices:
GeneralTV issues
•
Check that the devices are connected
properly.
Check that the picture settings are
correctly set.
TheTV does not switch on:
•
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
•
•
Check that the power cable is securely
connected.
Sound issues
The remote control is not working properly:
•
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
There is picture but no sound from theTV:
•
•
•
Check that all cables are properly
connected.
Check that the volume is not set to 0 or
low.
•
•
Replace the remote control batteries if
they are flat or weak.
Clean the remote control and TV sensor lens.
Check that the sound is not muted.
The standby light on theTV blinks red:
There is picture but sound quality is poor:
•
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
•
Check that the sound settings are
correctly set.
There is picture but sound comes from one
speaker only:
•
Verify that sound balance is set to the center.
When turning theTV on/off/to standby, you
hear a creaking sound from theTV chassis:
•
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools and warms up. This
does not impact performance.
Contact us
If you cannot resolve your problem, refer to the
If the problem remains unresolved, contact
Philips Consumer Care in your country.
Picture issues
Warning
TheTV is on, but there is no picture:
•
Check that the antenna is properly
connected to the TV.
Check that the correct device is selected
as the TV source.
• Do not attempt to repair the TV yourself. This
may cause severe injury, irreparable damage to
your TV or void your warranty.
•
There is sound but no picture:
•
Check that the picture settings are
correctly set.
Note
• Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
There is poorTV reception from an antenna
connection:
•
Check that the antenna is properly
connected to the TV.
8 Product
information
Product information is subject to change
without notice. For detailed product
Picture
Diagonal screen size: 54cm
Visible diagonal screen size: 51cm
Aspect ratio: 4:3
Tuner/Reception/Transmission
•
•
•
Antenna input: 75ohm coaxial
TV system: PAL BG
Video playback: NTSC, PAL
Remote control
•
Batteries: 2 x AAA (LR03 type)
Connections
•
•
•
•
•
CVI
CVBS In
Side CVBS In
Monitor Out
Antenna
Power
•
•
Mains power: AC 100-240V, 50-60Hz
Power consumption: 72W
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips confirms that if its products are
handled properly for their intended use, they
are safe to use according to scientific evidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
9 Notice
2009 © Koninklijke Philips Electronics N.V.All
rights reserved.
Specifications are subject to change without
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Copyright
All other registered and unregistered
trademarks are the property of their respective
owners.
Philips cannot be held responsible neither for
any errors in the content of this document
nor for any problems as a result of the content
in this document. Errors reported to Philips
will be adapted and published on the Philips
support website as soon as possible.
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and official repair shops. Failure
to do so shall void any warranty, stated or
implied.
Any operation expressly prohibited in
this manual, any adjustments, or assembly
procedures not recommended or authorised in
this manual shall void the warranty.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers,
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
|