4CH MPEG-4/JPEG Video Encoder with Video Analytic
WJ-NT314
4CH MPEG-4/JPEG Video Encoder
WJ-NT304
WJ-NT314 (12 V DC, 120 V AC adapter attached)
WJ-NT304 (12 V DC, 120 V AC adapter attached)
WJ-NT314 (12 V DC, 220 ~ 240 V AC adapter attached)
WJ-NT304 (12 V DC, 220 ~ 240 V AC adapter attached)
4CH MPEG-4/JPEG dual streaming Video Encoder
featuring 2CH Video Analytic
Key Features
(WJ-NT314)
• Up to 4 analog cameras can be connected.
• Alarm e-mail notification
•
MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips
• Max bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 /
2,048 / 3,072 / 2,048 / 4,096 / 6,144 kbps) combined with Total bit
rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 / 8,192 /
16,384 kbps / Unlimited) allowing flexible network management.
• Supported protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP,
DNS, DDNS, NTP, RTP and SNMP
• Multi-language capable by localization
• FTP client function enables periodic image data transfer or transfer
upon alarm.
• MPEG-4 and JPEG dual stream output for simultaneous live
monitoring and high resolution recording
• Progressive output allows every frame to be clear even when the
subject is moving.
• Video Analytic (WJ-NT314 only): 8 detection programs, each with
three intruder detection areas and one object abandonment /
removal detection area. Up to 8 detected objects per channel can be
traced. Depth correction allows more accurate detection when the
scene includes deeper depth.
• Panasonic camera control: Pan / Tilt / Zoom / Focus / Iris / Preset
position (up to 256), Auto mode, Setup menu. AUX, B/W ON/OFF/
Auto, Click centering
Standard Accessories
• Operating Instructions .................. 1 pc.
• Warranty card
• Code label .................................... 1 pc.
• Power cord (NTSC model) ........... 1 pc.
• Power cord (PAL model) ............. 2 pcs.
• Unit title display: Up to 20 alphanumeric characters on browser
• Camera title display: Up to 20 alphanumeric characters on browser
• SD memory card slot for alarm recording and backup upon network
failure. Recorded data can be downloaded by using FTP command.
• Alarm sources including 2x AVMD (WJ-NT314 only), 4x Terminal
inputs, 4x Camera alarms, 4x Video loss alarms and Panasonic
alarm protocol can trigger actions including SD memory
recording/FTP image transfer, E-mail notification, Alarm indication,
Terminal output and Panasonic protocol output.
(NTSC model only) ....................... 1 pc.
• CD-ROM* ..................................... 1 pc.
* The CD-ROM contains the operating
instructions (PDFs) and the setup tools
(Panasonic IP setup software, etc.).
The following are for installation.
• AC adapter ................................... 1 pc.
Optional Accessories
EIA19-type Rack Mounting Bracket
EIA19-type Rack Mounting Bracket
WV-Q204/1S
WV-Q204/2S
(for mounting one WJ-NT314/NT304)
(for mounting two WJ-NT314/NT304)
• Bi-directional audio (1CH)
• Built-in network interface (10Base-T / 100Base-TX)
• Multiscreen: Images from 16 cameras can be displayed in four
separate Quad screens (JPEG only). 20 characters camera title is
available for each camera.
|