Panasonic TH 32LR11UK User Manual

Operating Instructions

High Deﬁnition Hospitality LCD Display

Model No.

TH-32LR11UK

TH-32LR11UH

The illustration shown is an image.

Before connecting, operating or adjusting this product, please read these instructions completely.

Please keep this manual for future reference.

English

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11) Only use attachments / accessories speciﬁed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with

the apparatus. When a cart is used, use caution when moving the cart / apparatus combination

to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged

in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment

from your new LCD Display.

To obtain maximum benefit from your set, please read these Instructions before making any adjustments,

and retain them for future reference.

Retain your purchase receipt as well, and record the model number and serial number of your set in the

space provided on the rear cover of these instructions.

Table of Contents

Important Safety Instructions.................................. 3

FCC STATEMENT...................................................... 5

Safety Precautions................................................... 6

Maintenance.............................................................. 7

Accessories .............................................................. 8

Accessories Supplied.............................................. 8

Location................................................................... 8

Preparation for Wall-hanging................................... 9

Connections.............................................................. 9

PC Input Terminals connection.............................. 10

SERIAL Terminals connection............................... 11

Power ON / OFF ..................................................... 12

Initial selections ..................................................... 13

Selecting the input signal ...................................... 13

Selecting the On-Screen Menu Language ............ 13

Basic Controls ........................................................ 14

ASPECT Controls ................................................... 16

MULTI PIP................................................................ 17

Advanced PIP........................................................ 18

Digital Zoom............................................................ 19

On-Screen Menu Displays..................................... 20

Adjusting POS. /SIZE ............................................. 21

PICTURE Adjustments........................................... 22

ADVANCED SETTINGS........................................ 23

SOUND Adjustment................................................ 24

PRESENT TIME SETUP / SET UP TIMER.............. 25

PRESENT TIME SETUP....................................... 25

SET UP TIMER ..................................................... 25

SIDE BAR ADJUST................................................. 26

Reduces power consumption ............................... 27

Customizing the Input labels................................. 28

SET UP for Input Signals ....................................... 29

COMPONENT / RGB IN SELECT......................... 29

YUV / RGB IN SELECT......................................... 29

SIGNAL menu ....................................................... 30

3D Y/C FILTER...................................................... 30

COLOR SYSTEM / Panasonic AUTO ................... 31

3:2 PULLDOWN.................................................... 31

XGA MODE ........................................................... 31

NOISE REDUCTION............................................. 32

SYNC .................................................................... 33

Input signal display................................................ 33

Options Adjustments ............................................. 34

Weekly Command Timer ....................................... 37

Shipping condition................................................. 38

Troubleshooting ..................................................... 39

List of Aspect Modes ............................................. 40

PC input signals ..................................................... 41

Command list of Weekly Command Timer........... 42

Speciﬁcations......................................................... 43

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced technician for help.

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:(1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC CAUTION:

To assure continued compliance, follow the attached installation instructions and use only shielded interface

cables when connecting to computer or peripheral devices. Any changes or modiﬁcations not expressly

approved by Panasonic Corp. of North America could void the user's authority to operate this device.

FCC Declaration of Conformity

Model No. TH-32LR11UK, TH-32LR11UH

Responsible Party:

Contact Source:

Panasonic Corporation of North America

One Panasonic Way 1F-10, Secaucus, NJ 07094

Panasonic Professional Display Company

Panasonic Plasma Concierge 1-800-973-4390

CANADIAN NOTICE:

This Class B digital apparatus complies with Canadian ICES-003.

Note:

Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen.

However, it will disappear after a while.

Trademark Credits

• VGA is a trademark of International Business Machines Corporation.

• Macintosh is a registered trademark of Apple Computer, USA.

• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully

respected.

Safety Precautions

CAUTION

This LCD Display is for use only with the following optional accessories. Use with any other type of optional

accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Panasonic Corporation.)

•Wall-hanging bracket (angled) ..................................................TY-WK32GRW

•BNC Component Video Terminal Board....................................TY-42TM6A

•BNC Composite Video Terminal Board.....................................TY-42TM6B

•BNC Dual Video Terminal Board...............................................TY-FB9BD

•Ir Through Terminal Board ........................................................TY-FB9RT

•RCA Component Video Terminal Board....................................TY-42TM6Z

•RCA Composite Video Terminal Board .....................................TY-42TM6V

•PC Input Terminal Board...........................................................TY-42TM6P

•RGB (Digital) Terminal Board....................................................TY-42TM6D

•HDMI Terminal Board................................................................TY-FB8HM

•Dual HDMI Terminal Board .......................................................TY-FB10HMD

•AV Terminal Box........................................................................TY-TB10AV

•DVI-D Terminal Board ...............................................................TY-FB11DD

•U/V Tuner Board with MATE I/F................................................TY-FB9TU

(Except for Canada and United States of America, only Mexico)

Always be sure to ask a qualiﬁed technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard

unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being

played with by young children, creating the potential risk of suffocation.

Clean the power cable regularly to prevent it from

When using the LCD Display

becoming dusty.

Do not bring your hands, face or objects close to the

• Built-up dust on the power cord plug can increase

ventilation holes of the Display.

• Top of the Display is usually very hot due to the high

humidity which might damage the insulation and cause

ﬁre. Unplug the cord from the wall outlet and clean it

temperature of exhaust air being released through the

ventilation holes. Burns or personal injuries can happen

if any body parts are brought too close. Placing any

object near the top of the display could also result in

heat damages to the object as well as to the Display if its

ventilation holes are blocked.

with a dry cloth.

This Display radiates infrared rays, therefore it may

affect other infrared communication equipment.

Install your infrared sensor in a place away from direct

or reﬂected light from your Display.

Note:

Be sure to disconnect all cables before moving the

Display.

Image retention may occur. If you display a still picture for

an extended period, the image might remain on the screen.

However, it will disappear after a while.

•

Moving the Display with its cables attached might damage

the cables which, in turn, can cause ﬁre or electric shock.

Disconnect the power plug from the wall outlet as a

safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Safety Precautions / Maintenance

WARNING

Do not handle the power cord plug with wet hands.

Setup

• Doing so may cause electric shocks.

Do not place the Display on sloped or unstable

surfaces.

Do not do anything that might damage the power cable.

When disconnecting the power cable, hold the plug,

not the cable.

• The Display may fall off or tip over.

Do not place any objects on top of the Display.

• If water spills onto the Display or foreign objects get

inside it, a short-circuit may occur which could result in

ﬁre or electric shock. If any foreign objects get inside the

Display, please consult an Authorized Service Center.

• Do not make any modiﬁcations, place heavy objects on,

place near hot objects, heat, bend, twist or forcefully

pull the power cable. Doing so may cause damage to

the power cable which can cause ﬁre or electric shock.

If damage to the cable is suspected, have it repaired at

an Authorized Service Center.

Do not cover the ventilation holes.

• Doing so may cause the Display to overheat, which can

cause ﬁre or damage to the Display.

If the Display will not be used for a long period of time,

unplug the power cord from the wall outlet.

Transport only in upright position!

• Transporting the unit with its display panel facing

upright or downward may cause damage to the internal

circuitry.

If problems occur during use

If a problem occurs (such as no picture or no sound),

or if smoke or an abnormal odor is detected from the

Display, unplug the power cord immediately.

• Continuous use of the Display under these conditions

might cause ﬁre or permanent damage to the unit.

Have the Display evaluated at an Authorized Service

Center. Services to the Display by any unauthorized

personnel are strongly discouraged due to its high

voltage dangerous nature.

When using the pedestal, leave a space of 3 ¹⁵/16” (10

cm) or more at the top, left and right, and 2 ³/4” (7 cm)

or more at the rear, and also keep the space between

the bottom of the display and the ﬂoor surface. If using

some other setting-up method, follow the manual of it.

(If there is no speciﬁc indication of installation dimension

in the installation manual, leave a space of 3 ¹⁵/16”

(10 cm) or more at the top, bottom, left and right, and 2 ³/4”

(7 cm) or more at the rear.)

If water or foreign objects get inside the Display, if the

Display is dropped, or if the cabinet becomes damaged,

disconnect the power cord plug immediately.

• A short may occur, which could cause ﬁre. Contact an

Authorized Service Center for any repairs that need to be

made.

AC Power Supply Cord

The Display is designed to operate on 110 - 127 V AC,

50/60 Hz.

Securely insert the power cord plug as far as it will go.

• If the plug is not fully inserted, heat may be generated

which could cause ﬁre. If the plug is damaged or the

wall socket plate is loose, they should not be used.

Maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning

cloth or a soft, lint-free cloth.

• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which

neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface

is dry.

• Do not scratch or hit the surface of the panel with ﬁngernails or other hard objects, otherwise the surface may become

damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise

the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added

and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

• Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside the

unit, operating problems may result.

• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet

surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact

with articles made from rubber or PVC.

Accessories

Accessories Supplied

Check that you have the Accessories and items shown

Operating Instruction book

CD-ROM

(Operating instructions)

The remote control is not included with this set. Available for purchase separately.

Object model : N2QAYB000178

Location

Place the display at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including

reﬂections) will fall on the screen.

Use of some types of ﬂuorescent lighting can reduce remote control transmitter range.

Adequate ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat or

moisture.

How to use the pedestal

Adjust the stand to your desired angle.

The stand angle can be rotated 20 ° to the right / left.

(View from Above)

LCD panel side

Accessories

Preparation for Wall-hanging

Before mounting the display on the wall, you must remove the pedestal from the display.

Follow the steps below:

Disconnect all the cables from the display.

Remove the pedestal.

Remove four screws

B Pull out the pedestal

Foam mat or thick

soft cloth

WARNING

Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer.

Any damage resulting from not having a professional installer mount will void your unit’s warranty.

Always be sure to ask a qualified technician to carry out set-up.

Incorrect fitting may cause equipment to fall, resulting in injury and product damage.

Do not mount this LCD display directly below ceiling lights (such as spotlights, floodlights, or halogen lights) which

typically give off high heat. Doing so may warp or damage plastic cabinet parts.

•

Connections

AUDIO

SLOT1

SLOT2

SLOT3

PC IN

SERIAL

Optional Terminal

Board Insert Slot

(covered)

From EXTERNAL

monitor terminal on

From SERIAL

Terminal on Computer

(see page 11)

Computer (see page 10)

Connections

PC Input Terminals connection

(Female)

COMPUTER

AUDIO

PC IN

Conversion adapter

(if necessary)

Mini D-sub 15p

(Male)

RGB

PC cable

Audio

Stereo plug

Connect a cable which matches

the audio output terminal on the computer.

Notes:

• Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning

frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

• The display resolution is a maximum of 1,024 × 768 dots when the aspect mode is set to “4:3”, and 1,366 × 768 dots

when the aspect mode is set to “FULL”. If the display resolution exceeds these maximums, it may not be possible to

show ﬁne detail with sufﬁcient clarity.

• The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need

to make setting changes to the computer at the time of connection.

• Some PC models cannot be connected to the set.

• There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.

• The computer shown in the illustration is for example purposes only.

• Additional equipment and cables shown are not supplied with this set.

• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speciﬁed

frequency range.

• Component Input is possible with the pin 1, 2, 3 of the Mini D-sub 15P Connector.

• Change the “COMPONENT/RGB-IN SELECT” setting in the “SET UP” menu to “COMPONENT”

(when COMPONENT signal connection) or “RGB” (when RGB signal connection). (see page 29)

Signal Names for Mini D-sub 15P Connector

Pin No.

Signal Name

R (P_R/C_R)

G (Y)

B (P_B/C_B)

NC (not connected)

GND (Ground)

Pin No.

Signal Name

GND (Ground)

+5 V DC

Pin No.

Signal Name

NC (not connected)

SDA

15 14 13 12 11

HD/SYNC

Pin Layout for PC Input

Terminal

GND (Ground)

SCL

Connections

SERIAL Terminals connection

The SERIAL terminal is used when the Display is controlled by a computer.

(Male)

COMPUTER

SERIAL

RS-232C Straight cable

Pin layout for SERIAL Terminal

(Female)

D-sub 9p

Notes:

• Use the RS-232C straight cable to connect the computer

to the Display.

• The computer shown is for example purposes only.

• Additional equipment and cables shown are not supplied

with this set.

Signal names for D-sub 9P connector

Pin No.

Details

R X D

T X D

GND

Non use

The SERIAL terminal conforms to the RS-232C interface

speciﬁcation, so that the Display can be controlled by a

computer which is connected to this terminal.

The computer will require software which allows the

sending and receiving of control data which satisﬁes the

conditions given below. Use a computer application such as

programming language software. Refer to the documentation

for the computer application for details.

•

(Shorted in this set)

•

These signal names are those of computer speciﬁcations.

Communication parameters

Command

Signal level

Synchronization method

Baud rate

RS-232C compliant

Parameter

Control details

Asynchronous

9600 bps

None

PON

None

Power ON

Parity

POF

Power OFF

Character length

Stop bit

8 bits

1 bit

AVL

AMT

Volume 00 - 63

Audio MUTE OFF

Audio MUTE ON

Flow control

IMS

None

Input select (toggle)

Basic format for control data

SL1

Slot1 input

The transmission of control data from the computer starts with

a STX signal, followed by the command, the parameters, and

lastly an ETX signal in that order. If there are no parameters,

then the parameter signal does not need to be sent.

SL2

Slot2 input

SL3

Slot3 input

PC1

PC input

SL1A

SL1B

SL2A

SL2B

Slot1 input (INPUT1A)

Slot1 input (INPUT1B)

Slot2 input (INPUT2A)

Slot2 input (INPUT2B)

STX

C1 C2 C3

P1 P2 P3 P4 P5

ETX

Colon Parameter(s) End

3-character

command (3 bytes)

(1 - 5 bytes) (03h)

Start

(02h)

DAM

None

Screen mode select (toggle)

ZOOM

FULL

JUST

NORM

SELF

SJST

SNOM

SFUL

ZOOM

FULL

Notes:

JUST

• If multiple commands are transmitted, be sure to wait for

the response for the ﬁrst command to come from this unit

before sending the next command.

4:3

Panasonic Auto

JUST

4:3

• If an incorrect command is sent by mistake, this unit will

send an “ER401” command back to the computer.

• SL1A, SL1B, SL2Aand SL2B of Command IMS are available

only when a dual input terminal board is attached.

H-FILL

With the power off, this display responds to PON command

only.

Power ON / OFF

Connecting the plug to the Wall Outlet.

Press the Power switch on the Display to turn the set on: Power-On.

Power Indicator: Green

POWER

Power Indicator

Remote Control Sensor

Press the

button on the remote control to turn the Display off.

Power Indicator: Red (standby)

Press the

button on the remote control to turn the Display on.

Power Indicator: Green

Turn the power to the Display off by pressing the POWER switch on the unit, when

the Display is on or in standby mode.

Note:

During operation of the power management function, the power indicator turns

orange in the power off state.

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.

Press to select the input signal to be played back from the

equipment which has been connected to the Display.

Input signals will change as follows:

INPUT1

INPUT2

INPUT3

Notes:

• Selecting is also possible by pressing the INPUT button on the unit.

• Input terminal will not be selected if the terminal board is not installed into the

SLOT.

• Select to match the signals from the source connected to the component/RGB input

terminals. (see page 29)

• In 2 screen display, the same input mode cannot be selected for the main picture

and sub picture.

POWER

INPUT

Selecting the On-Screen Menu Language

Press to display the SET UP menu.

Press to select OSD LANGUAGE.

Press to select your preferred language.

Selectable languages

English(UK)

SET UP

1/2

SIGNAL

COMPONENT/RGB-IN SELECT

RGB

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

Deutsch

Français

Italiano

Español

ENGLISH(US)

.......(Chinese)

.......(Japanese)

.......(Russian)

OFF

(

)

ENGLISH US

Русский

Basic Controls

Main Power On / Off Switch

POWER

INPUT

–

/ź

+/Ÿ

ENTER/Ŷ

VOL

Enter / Aspect button

This button is locked by initial

setting. (see page 16, 20)

INPUT button

(INPUT1, INPUT2, INPUT3 and PC selection)

(see page 13)

Volume Adjustment

Volume Up “+” Down “–”

MENU Screen ON / OFF

When the menu screen is displayed:

“+” : press to move the cursor up

“–” : press to move the cursor down

(see page 20)

This button is locked by initial setting.

Each time the MENU button is pressed, the

menu screen will switch. (see page 20)

Normal Viewing

SOUND

PICTURE

POS. /SIZE

SET UP

How to release button lock

Remote control sensor

MENU and ENTER/Ŷ buttons are locked

before shipping.

You can unlock them with unit buttons.

Power Indicator

1. Press +/Ÿ 4 times.

2. Press INPUT 4 times.

3. Press –/ź 4 times.

4. Press ENTER/Ŷ.

The Power Indicator will light.

• Power-OFF ....Indicator not illuminated (The unit will still consume

some power as long as the power cord is still inserted

into the wall outlet.)

• Standby .........Red

• Power-ON ......Green

• DPMS.............Orange (With PC input signal and during operation of

PC’s screensaver.)

Note:

After unlocking the buttons, Button lock

in OPTIONS menu is set to “Off”.

(see page 35)

Basic Controls

Remote Control Transmitter

The remote control is not

included with this set. Available

for purchase separately.

SURROUND button

The surround setting switches on and off each time

the SURROUND button is pressed.

The beneﬁts of surround sound are enormous. You

can be completely enveloped in sound; just as if you

were at a concert hall or cinema.

OFF

Object model : N2QAYB000178

Note:

The surround settings are memorized separately

for each AUDIO MENU (STANDARD, DYNAMIC,

CLEAR).

SURROUND ON

ACTION button

Press to make selections.

OFF TIMER button

The Display can be preset to

switch to stand-by after a ﬁxed

period. The setting changes to 30

minutes, 60 minutes, 90 minutes

and 0 minutes (off timer cancelled)

each time the button is pressed.

ASPECT button

Press to adjust the aspect.

(see page 16)

POWER button

The Display must ﬁrst be plugged into

the wall outlet and turned on at the power

switch (see page 12).

Press this button to turn the Display On,

from Standby mode. Press it again to turn

the Display Off to Standby mode.

When three minutes remain, “OFF

TIMER 3” will ﬂash.

The off timer is cancelled if a

power interruption occurs.

POS. /SIZE button

(see page 21)

SET UP button (see page 20)

PICTURE button

SOUND button (see page 24)

(see page 22)

Volume Adjustment

Sound mute On / Off

Press the Volume Up “+” or Down “–”

button to increase or decrease the

sound volume level.

Press this button to mute the sound.

Press again to reactivate sound.

Sound is also reactivated when power is

turned off or volume level is changed.

R button (see page 20)

Press the R button to return to

previous menu screen.

N button

(see page 21, 22, 23, 24)

RECALL button

Press the “RECALL” button to display

the current system status.

POSITION buttons

Input label

Aspect mode (see page 16)

Off timer

INPUT button

PresstoselectINPUT1,INPUT2,INPUT3

and PC input SLOTS sequentially. (see

page 13)

The off timer indicator is displayed only

when the off timer has been set.

Clock display (see page 36)

When a dual input terminal board is

attached,Aor B is displayed depending

on the selected input signal. (Ex.

INPUT1A, INPUT1B)

4:3

10:00

OFF TIMER 90

MULTI Window buttons

(see page 17)

Digital Zoom (see page 19)

ASPECT Controls

The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.

Press repeatedly to move through the aspect options:

For details about the aspect mode, please see “List of Aspect Modes” (page 40).

For VIDEO (S VIDEO) signal input:

4:3

ZOOM

JUST

Panasonic AUTO

FULL

Note:

[from the unit]

When selecting an input slot that attaches BNC Dual Video Terminal

Board (TY-FB9BD), Panasonic AUTO cannot be selected.

–

INPUT

/▼

+/▲

ENTER/■

VOL

The aspect mode changes each time the ENTER button is pressed.

For PC signal input:

4:3 ZOOM

FULL

For SD signal input (525 (480) / 60i • 60p, 625 (575) / 50i • 50p):

4:3 ZOOM FULL JUST

For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]:

4:3

H-FILL

ZOOM

FULL

JUST

[During MULTI PIP Operations]

• Picture and Picture, Picture in Picture :

• Others

4:3

FULL

: Aspect switching is not possible.

Notes:

• Panasonic AUTO can be selected only during Video signal input.

• The aspect mode is memorized separately for each input terminal.

Panasonic AUTO

The display will automatically become enlarged (depending on the picture source), allowing you to view the picture at its maximum size.

Notes:

Panasonic AUTO

• Panasonic AUTO mode is designed to automatically adjust the

aspect ratio to handle a mix of 16:9 and 4:3 program material.

Certain 4:3 program material, such as stock market data screens,

may occasionally cause the image size to change unexpectedly.

When viewing such programs, it is recommended that the ASPECT

be set to 4:3.

• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with

FULL mode, the adjustment is not memorized. When exiting the

mode, the screen will return to a former adjustment.

For letter box image

Image is expanded

Changes in accordance with

the Panasonic AUTO mode

setting (see page 31).

For a 4:3 image

All Aspect mode

Set “All Aspect” to “On” in Options menu to enable the extended aspect mode (page 36). When All Aspect mode, the aspect

mode of pictures is switched as follows. For details about the aspect mode, please see “List of Aspect Modes” (page 40).

For VIDEO (S VIDEO) signal input:

4:3

Zoom1

Zoom2

Zoom3

Panasonic Auto

16:9

14:9

Just

Notes:

• When selecting an input slot that attaches BNC Dual Video Terminal Board (TY-FB9BD), Panasonic Auto cannot be

selected.

• In All Aspect mode, “Panasonic AUTO” is displayed as “Panasonic Auto”.

ASPECT Controls

For PC signal input:

4:3 Zoom

16:9

For SD signal input (525 (480) / 60i

4:3 Zoom1 Zoom2

•

60p, 625 (575) / 50i

•

50p):

Zoom3 16:9 14:9

Just

For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]:

4:3 Full Zoom1 Zoom2 Zoom3 16:9 14:9 Just1 Just2 4:3 (1) 4:3 (2)

MULTI PIP

Press repeatedly.

Each time pressing this button main picture and sub picture will be displayed as follows below.

[Picture and Picture]

Main picture Sub picture

[Picture out Picture]

[Picture in Picture]

Main picture

Sub picture Main picture Sub picture

Normal

Viewing

A B

Press to swap main picture and

sub picture.

B A

[Example]

Press to select the input mode.

Main picture label is bright

Sub picture label is bright

Under main Picture and sub picture display, select the

picture which you would like to change input modes.

Notes:

PC1

VIDEO2

PC1

VIDEO2

• The sub picture sound is heard while a sub picture

operation is underway.

• The sub picture operation automatically returns to

the main picture operation if a sub picture operation

has not been performed for about 5 seconds or if any

of the remote control buttons is pressed (except

button).

Input modes switching is possible

Main picture label is changed Sub picture label is changed

VIDEO2

VIDEO1

PC1

VIDEO2

Picture is changed

Press to change input signal.

Press to move the sub picture.

Each time the location of the sub picture will be moved.

Notes:

• This button is effective only in the picture in picture.

• The sub picture may be hidden by the on screen display, depending on its position.

MULTI PIP

Advanced PIP

Set “Advanced PIP” to “On” in Options menu. (see page 35)

Press repeatedly.

Each time pressing this button main picture and sub picture will be displayed as follows.

One screen Advanced PIP

Sub screen Main screen

Notes:

• To use

, buttons for the screen operations, follow the procedures in the previous page.

•

, and

buttons are invalid during Advanced PIP operation.

Notes:

• If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.

• Sound output is from the picture which is selected in AUDIO OUT (PIP) (see page 24).

• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.

• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the

pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed

on the main picture and depending on the 2-picture display mode.

• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.

•

Computer screen picture is displayed in a simpliﬁed format, and it may not be possible to discern details on them satisfactorily.

Following combinations of two analog signals cannot be displayed simultaneously;

Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)

Digital Zoom

This displays an enlargement of the designated part of the displayed image.

Display the operation guide.

EXIT

Press to access Digital Zoom.

The operation guide will be displayed.

During Digital Zoom, only the following buttons can be operated.

[Unit]

[Remote control]

SURROUND button

OFF TIMER button

–

INPUT

/▼

+/▲

ENTER/■

VOL

VOL button

MUTE button

POSITION /

ACTION button

Select the area of the image to be enlarged.

Press on the enlargement location to select.

The cursor will move.

EXIT

Select the magniﬁcation required for the enlarged display.

Each time this is pressed, the magniﬁcation factor changes.

This is shown in the image being displayed.

× 1

× 2

× 3

× 4

Return to normal display (quit Digital Zoom).

Press to exit from the Digital Zoom.

Notes:

• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.

• The Digital Zoom function cannot be selected while in the following operation state:

“Multi-viewer” (Picture in Picture, Picture out Picture, Picture and Picture) operation. (see page 17)

• While Digital Zoom is in operation, “Adjusting POS. /SIZE” cannot be used.

On-Screen Menu Display

Remote Control

Unit

Display the menu screen.

Press several times.

Each time the MENU button is pressed, the menu

screen will switch.

Press to select.

(Example: PICTURE menu)

Normal Viewing

PICTURE

SET UP

POS. /SIZE

SOUND

2 ^{Select the item.}

PICTURE

1/2

Select.

Set.

Select.

Press.

NORMAL

NORMALIZE

STANDARD

PICTURE MENU

BACKLIGHT

PICTURE

–

/▼

+/▲

ENTER/■

BRIGHTNESS

COLOR

TINT

SHARPNESS

(Example: PICTURE menu)

Set.

–

/▼

+/▲

ENTER/■

Press.

Exit the menu.

Press several times.

Press.

Press

to return to the previous menu.

Overview

Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

[

]

POS. /SIZE

SET UP

1/2

SIGNAL

VIDEO

NORMAL

NORMALIZE

AUTO SETUP

H-POS

SIGNAL

COMPONENT/RGB-IN SELECT

RGB

3D Y/C FILTER (NTSC)

COLOR SYSTEM

AUTO

OFF

4:3

3 : 2 PULLDOWN

H-SIZE

V-POS

V-SIZE

INPUT LABEL

Panasonic AUTO (4 : 3)

NOISE REDUCTION

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

DOT CLOCK

CLOCK PHASE

(see page 30-33)

(

)

ENGLISH US

(see page 21)

PICTURE

2/2

SET UP

2/2

1/2

OFF

SET UP TIMER

PRESENT TIME SETUP

SIDE BAR ADJUST

COLOR TEMP

NORMAL

OFF

NORMAL

NORMALIZE

COLOR MANAGEMENT

PICTURE MENU

STANDARD

BRIGHT

ADVANCED SETTINGS

BACKLIGHT

PICTURE

BRIGHTNESS

COLOR

SET UP TIMER

PRESENT TIME OF DAY 99:99

TINT

SHARPNESS

OFF

0:00

OFF

0:00

POWER ON FUNCTION

POWER ON TIME

POWER OFF FUNCTION

POWER OFF TIME

(see page 22, 23)

SOUND

(see page 25)

NORMAL

NORMALIZE

AUDIO MENU

BASS

MID

TREBLE

BALANCE

SURROUND

AUDIO OUT (PIP)

STANDARD

ADVANCED SETTINGS

NORMAL

PRESENT TIME SETUP

PRESENT TIME OF DAY MON 99:99

SET

NORMALIZE

BLACK EXTENSION

INPUT LEVEL

GAMMA

MON

99:99

DAY

OFF

MAIN

PRESENT TIME OF DAY

2.2

OFF

AGC

(see page 25)

(see page 24)

(see page 22, 23)

Adjusting POS. /SIZE

During “VIDEO (S VIDEO)”, “Digital”,

“SDI” and “HDMI” input signal.

Press to display the POS. /SIZE menu.

Press to select the menu to adjust.

POS. /SIZE

NORMAL

NORMALIZE

AUTO SETUP

H-POS

H-SIZE

V-POS

V-SIZE

Press to adjust the menu.

During “COMPONENT”, “RGB”

and “PC” input signal.

POS. /SIZE

NORMAL

NORMALIZE

AUTO SETUP

H-POS

H-SIZE

V-POS

V-SIZE

DOT CLOCK

Press to exit from adjust mode.

Notes:

• Unadjustable items are grayed out.

Adjustable items differ depending on the input signal and the display mode.

CLOCK PHASE

• Adjustment details are memorized separately for different input signal formats. (Adjustments for component signals are

memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF,

1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)

• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture

position movement cannot be controlled by the POS. /SIZE function.

• If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode, the adjustment is not memorized. When

exiting the mode, the screen will return to a former adjustment.

AUTO

SETUP

Automatically adjust H-POS / V-POS / CLOCK PHASE / DOT CLOCK and set H-SIZE / V-SIZE the standard

value when RGB signal is input.

Notes:

• If the dot clock frequency is 108 MHz or higher, DOT CLOCK cannot be made.

• If the image is that the edge is hardly ﬁgured out or shadowy, that cannot be adjusted automatically.

In such case, press AUTO SETUP again after changing the image to the clearer one.

• When DVI-D is input, CLOCK PHASE cannot be adjusted automatically.

• Select NORMALIZE in POS. /SIZE and press the ACTION ( ) button when appropriate adjustment cannot

be made.

H-POS

H-SIZE

Adjust the horizontal position.

V-POS

Adjust the vertical position.

Adjust the horizontal size.

V-SIZE

Adjust the vertical size.

DOT

CLOCK

(During “COMPONENT”, “RGB” and “PC” input signal)

Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens,

adjust so that any such noise is minimized.

CLOCK

PHASE

(During “COMPONENT”, “RGB” and “PC” input signal)

Eliminate the ﬂickering and distortion.

NORMALIZE

Helpful Hint (

Normalization)

While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION

( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

PICTURE Adjustments

Press to display the PICTURE menu.

Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu

changes depending on signal, input and menu setting.

PICTURE

1/2

Press the left or right button to switch between modes.

STANDARD DYNAMIC

NORMAL

NORMALIZE

STANDARD

PICTURE MENU

BACKLIGHT

PICTURE

BRIGHTNESS

COLOR

TINT

SHARPNESS

CINEMA

STANDARD

For viewing in standard (evening lighting) environments.

This menu selects the normal levels of BRIGHTNESS

and PICTURE.

DYNAMIC

PICTURE

2/2

For viewing in brighter environments.

This menu selects higher than normal levels of

BRIGHTNESS and PICTURE.

OFF

NORMAL

OFF

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

CINEMA

Ideal for movies.

Press to select “ON”.

Note:

If you would like to change the picture and color of the

selected PICTURE menu to something else, adjust using

the items in the PICTURE menu. (see next page)

Press to enter Advanced

Settings.

ADVANCED SETTINGS ON

Enables ﬁne picture adjustment at a professional

level (see next page).

Controls dark areas without affecting the black level or

brightness in the overall picture.

ADVANCED SETTINGS

NORMAL

NORMALIZE

BLACK EXTENSION

INPUT LEVEL

GAMMA

2.2

OFF

Press the left or right button to switch between modes.

AGC

NORMAL

COOL

WARM

ADVANCED SETTINGS OFF

Displays images with settings of the PICTURE

menu.

COLOR MANAGEMENT ON

Enables vivid color adjustment automatically.

NORMALIZE

Helpful Hint (

Normalization)

While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION

( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

PICTURE Adjustments

Notes:

Item

Effect

Adjustments

• “COLOR” and “TINT” settings cannot be

adjusted for “RGB/PC” and “Digital” input

signal.

You can change the level of each function

(BACKLIGHT, PICTURE, BRIGHTNESS,

COLOR, TINT, SHARPNESS) for each

PICTURE MENU.

• The setting details for STANDARD,

DYNAMIC and CINEMA respectively

are memorized separately for each input

terminal.

• The “TINT” setting can be adjusted

for NTSC signal only during “VIDEO

(S VIDEO)” input signal.

BACKLIGHT

Adjusts luminance of the back light.

Darker

Brighter

•

PICTURE

Adjusts the proper picture contrast.

Less

Adjusts for easier viewing of dark

pictures such as night scenes and

black hair.

BRIGHTNESS

Darker

Brighter

COLOR

TINT

Adjusts color saturation.

Less

Reddish

Less

Greenish

Adjusts for natural ﬂesh tones.

Adjusts picture sharpness.

• In PICTURE, there is not a noticeable

change even when contrast is increased

with a bright picture or reduced with a dark

picture.

SHARPNESS

ADVANCED SETTINGS

Item

Effect

Details

BLACK

Adjusts the dark shades of the image in gradation.

EXTENSION

Less

Down

OFF

Adjustment of parts which are extremely bright and hard to see.

(This cannot be adjusted when the input signal is Digital.)

INPUT

LEVEL

GAMMA

S CURVE

2.0

2.2

2.5

AGC

Increases the brightness of dark signal automatically.

Notes:

• The adjustment values are memorized separately for each input terminal.

• The adjustment range values should be used as an adjustment reference.

NORMALIZE

Helpful Hint (

Normalization)

On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at

any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the

factory settings.

SOUND Adjustment

SOUND

Press to display the SOUND menu.

NORMAL

NORMALIZE

AUDIO MENU

BASS

MID

TREBLE

BALANCE

SURROUND

STANDARD

Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by listening to the sound.

OFF

MAIN

AUDIO OUT (PIP)

Press to exit from adjust mode.

Item

Details

STANDARD: Emits the original sound.

AUDIO MENU

DYNAMIC: Accentuates sharp sound.

CLEAR:

Attenuates human voice.

BASS

MID

Adjusts low pitch sounds.

Adjusts normal sounds.

Adjusts pitch sound.

TREBLE

BALANCE

SURROUND

Adjusts left and right volumes.

Select ON or OFF.

MAIN: Selects main picture sound.

INPUT1

SUB: Selects PIP frame sound.

AUDIO OUT (PIP)

Musical note ƈ is displayed on right side of the audio output

screen label.

Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.

NORMALIZE

Helpful Hint (

Normalization)

While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or theACTION

( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

PRESENT TIME SETUP / SET UP TIMER

The timer can switch the Display ON or OFF.

Before attempting Timer Set, conﬁrm the PRESENT TIME OF DAY and adjust if necessary.

Then set POWER ON TIME / POWER OFF TIME.

SET UP

2/2

Press to display the SET UP menu.

SET UP TIMER

PRESENT TIME SETUP

SIDE BAR ADJUST

Press to select SET UP TIMER or

PRESENT TIME SETUP.

BRIGHT

Press to display the SET UP TIMER screen or PRESENT TIME SETUP screen.

PRESENT TIME SETUP

Press to select DAY or PRESENT TIME OF DAY.

PRESENT TIME SETUP

PRESENT TIME OF DAY MON 99:99

SET

DAY

Press to set up DAY or PRESENT TIME OF DAY.

button: Forward

button: Back

Notes:

MON

99:99

PRESENT TIME OF DAY

• Pressing “ ” or “ ” button once changes PRESENT TIME OF DAY 1 minute.

• Pressing “ ” or “ ” button continuously changes PRESENT TIME OF DAY by 15 minutes.

Press to select SET.

Press to store PRESENT TIME SETUP.

Notes:

• SET cannot be selected unless PRESENT TIME OF DAY is set.

• Unless setting the present time other than “99:99”, DAY setting is invalid.

• The settings of “DAY” and “PRESENT TIME OF DAY” are reset when leaving the display turned

off for about 7 days for the following reasons:

Pressing POWER switch of the unit to turn off the display.

Disconnecting the AC cord.

Interruption of power supply.

SET UP TIMER

Press to select POWER ON TIME / POWER OFF TIME.

SET UP TIMER

PRESENT TIME OF DAY 99:99

Press to set up POWER ON TIME / POWER OFF TIME.

button: Forward

button: Back

OFF

0:00

OFF

0:00

POWER ON FUNCTION

POWER ON TIME

POWER OFF FUNCTION

POWER OFF TIME

Notes:

• Pressing “ ” or “ ” button once changes POWER ON TIME

/ POWER OFF TIME 1 minute.

• Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFF

TIME by 15 minutes.

Press to select POWER ON FUNCTION / POWER OFF FUNCTION.

Press to select ON.

Note:

Timer function will not work unless “PRESENT TIME OF DAY” is set.

SIDE BAR ADJUST

side bars

4:3 mode

Do not display a picture in 4:3 mode for an extended period,

as this can cause an image retention to remain on the side

bars on either side of the display ﬁeld.

To reduce the risk of such an image retention, illuminate the

side bars.

image

retention

This function may be applicable to the non-picture area.

Non picture area

Picture out Picture

Picture and Picture

Press to display the SET UP menu.

Press to select the SIDE BAR ADJUST.

SET UP

2/2

SET UP TIMER

PRESENT TIME SETUP

SIDE BAR ADJUST

Press to select OFF, DARK, MID, BRIGHT.

BRIGHT

OFF

DARK

MID

BRIGHT

Press to exit from adjust mode.

Notes:

• To reduce the occurrence of image retention, set the SIDE BAR ADJUST to BRIGHT.

• The side bar may ﬂash (alternate black/white) depending on the picture being shown on the screen. Using Cinema mode

will reduce such ﬂashing.

Reduces power consumption

• POWER SAVE:

When this function is turned ON, luminous level of the LCD Display is suppressed, so power

consumption is reduced.

• STANDBY SAVE:

When this function is turned ON, power consumption of the microcomputer is reduced during

power supply standby (see page 12, 14, 15), so standby power of the set is reduced.

When this function is set to ON, it operates under the following conditions to turn the power

on or off automatically.

When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC IN

signal input:

• POWER MANAGEMENT:

ĺPower is turned off (standby); the power indicator lights up orange.

When pictures (HD/VD sync signals) are subsequently detected:

ĺPower is turned on; the power indicator lights up green.

Notes:

• This function operates only during PC IN signal input.

• This function is invalid during input from PC Input Terminal Board (TY-42TM6P).

• This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT”

is set to “RGB” and during normal viewing (one picture screen).

Equipment power supply is turned OFF when there is no signal.

When this is set to On, the power supply of the unit goes Off 10 minutes after the input

signals stop.

• AUTO POWER OFF:

Notes:

• This function operates only during PC IN signal input.

• This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT”

is set to “RGB” and during normal viewing (one picture screen).

Press to select

SET UP

1/2

“POWER SAVE”

“STANDBY SAVE”

“POWER MANAGEMENT”

“AUTO POWER OFF”.

SIGNAL

COMPONENT/RGB-IN SELECT

RGB

INPUT LABEL

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

Press to select “ON” or “OFF”.

Off

(

)

ENGLISH US

Press to exit from SET UP.

Customizing the Input labels

This function can change the label of the Input signal to be displayed.

Select the input signal which you would like to change its label before customizing the

Input labels. (see page 13, 15)

SET UP

1/2

SIGNAL

COMPONENT/RGB-IN SELECT

RGB

Press to select INPUT LABEL.

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

Press to change the INPUT LABEL.

OFF

(

)

ENGLISH US

Note:

While selecting a Input signal through Optional Terminal Board connected to Slot 1, Slot 2 and Slot 3, the Input label will

depend on each Optional Terminal Board.

INPUT LABELS for Slot 1, Slot 2, Slot 3 and Mini D-sub:

[Slot1 Input]

[Slot2 Input]

[Slot3 Input]

INPUT1/VIDEO1/COMPONENT1/RGB1/DIGITAL1/PC1/DVD1/CATV1/VCR1/STB1

INPUT2/VIDEO2/COMPONENT2/RGB2/DIGITAL2/PC2/DVD2/CATV2/VCR2/STB2

INPUT3/VIDEO3/COMPONENT3/RGB3/PC3/DVD3/CATV3/VCR3/STB3

[PC (Mini D-sub) input] PC/COMPONENT/RGB/DVD/STB

When BNC Dual Video Terminal Board (TY-FB9BD) is used, an “A” or “B” is added at the end of each input label, depending

on the input selected (see below).

Addition sign

Selected Input

“A”

Composite

“B”

S VIDEO

SET UP for Input Signals

COMPONENT / RGB IN SELECT

Select to match the signals from the source connected to the COMPONENT / RGB input terminals.

Y, P_B, P_Rsignals

RGB signals

“COMPONENT”

“RGB”

SET UP

1/2

Press to display the SET UP menu.

SIGNAL

COMPONENT/RGB-IN SELECT

RGB

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

Press to select the “COMPONENT / RGB-IN SELECT”.

Press to select the desired mode.

OFF

COMPONENT

RGB

(

)

ENGLISH US

Press to exit from adjust mode.

Notes:

• Selection may not be possible, depending on which optional board is installed.

• Make setting of the selected input terminal (SLOT1, SLOT2, SLOT3 or PC IN).

YUV / RGB IN SELECT

Select to match the signals from the source connected to the DVI input terminals.

YUV signals

RGB signals

“YUV”

“RGB”

SET UP

1/2

Press to display the SET UP menu.

SIGNAL

YUV/RGB-IN SELECT

RGB

OFF

Press to select the “YUV / RGB-IN SELECT”.

Press to select the desired mode.

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

YUV

RGB

(

)

ENGLISH US

Press to exit from adjust mode.

Notes:

• Selection may not be possible, depending on which optional board is installed.

• Make setting of the selected input terminal (SLOT1 or SLOT2).

SET UP for Input Signals

SIGNAL menu

SET UP

1/2

Note:

“SIGNAL” setup menu displays a different setting condition for each input signal.

SIGNAL

COMPONENT/RGB-IN SELECT

RGB

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

OFF

Press to display the SET UP menu.

Press to select the “SIGNAL”.

(

)

ENGLISH US

For VIDEO (S VIDEO)

For RGB

SIGNAL

Press to display the SIGNAL menu.

[

]

[

]

RGB

SIGNAL

VIDEO

3D Y/C FILTER (NTSC)

COLOR SYSTEM

SYNC

3 : 2 PULLDOWN

XGA MODE

AUTO

OFF

1024 × 768

OFF

Press to select the menu to adjust.

Press to adjust the menu.

AUTO

OFF

4:3

3 : 2 PULLDOWN

Panasonic AUTO (4 : 3)

NOISE REDUCTION

OFF

H-FREQ. 63.98 kHz

V-FREQ. 60.02 Hz

SIGNAL FORMAT 1280×1024/60

For COMPONENT

For Digital

SIGNAL

[

]

[

]

Digital

SIGNAL

COMPONENT

Press to exit from adjust mode.

3 : 2 PULLDOWN

XGA MODE

NOISE REDUCTION

OFF

1024 × 768

OFF

3 : 2 PULLDOWN

NOISE REDUCTION

OFF

H-FREQ. 63.98 kHz

V-FREQ. 60.02 Hz

SIGNAL FORMAT 1280×1024/60

H-FREQ. 63.98 kHz

V-FREQ. 60.02 Hz

SIGNAL FORMAT 1280×1024/60

3D Y/C FILTER – For NTSC AV images

Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.

(“SIGNAL [VIDEO]” menu is displayed.)

Press to select the “3D Y/C FILTER (NTSC)”.

Press to set ON / OFF.

3D Y/C FILTER (NTSC)

Note:

When ON, this setting only affects NTSC input signals.

SET UP for Input Signals

COLOR SYSTEM / Panasonic AUTO

Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input

signal mode.(“SIGNAL [VIDEO]” menu is displayed.)

Press to select the “COLOR SYSTEM” or “Panasonic AUTO”.

[

]

SIGNAL

VIDEO

3D Y/C FILTER (NTSC)

COLOR SYSTEM

Press to select each function.

AUTO

OFF

4:3

3 : 2 PULLDOWN

If the image becomes unstable:

With the system set on Auto, under conditions of low level or

Panasonic AUTO (4 : 3)

noisy input signals the image may in rare cases become unstable. Should this occur,

set the system to match the format of the input signal.

Mode

Function

COLOR SYSTEM Set the color system to match the input signal. When selecting “AUTO”, the color system is automatically

selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on

the attached terminal board. To display M.NTSC signal, select “M.NTSC” in COLOR SYSTEM.

AUTO

PAL

SECAM

M.NTSC

NTSC

Panasonic AUTO Set to “4:3” to view 4:3 images in an unchanged format when Panasonic AUTO is selected.

(4 : 3 ) If you would like to view 4:3 images in Just format, set to “JUST”.

Note:

Panasonic AUTO does not function when BNC Dual Video Terminal Board (TY-FB9BD) is used.

3:2 PULLDOWN

3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie

pictures, which are recorded at 24 frames per second.

If the picture is not stable, turn the setting to OFF.

Notes:

When ON, this setting only affects the following signal input:

• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.

• 525i(480i), 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.

Press to select “3:2 PULLDOWN”.

Press to set ON/OFF.

3 : 2 PULLDOWN

OFF

XGA MODE

This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGAsignals with

60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz, and

1,366 × 768 @ 60Hz). Be sure to make settings in accordance with the input signal in order to achieve a more appropriate

and attractive display.

In addition, after making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE”

menu as necessary. (see page 21)

Press to select “XGA MODE”.

XGA MODE

1024 × 768

Press to select “1024×768”, “1280×768” ,

“1366×768”.

SET UP for Input Signals

NOISE REDUCTION

Sets the following three NR (Noise Reduction) functions together.

VIDEO NR, MOSQUITO NR, BLOCK NR

Press to select “NOISE REDUCTION”.

NOISE REDUCTION

OFF

Press to select “OFF”, “MIN”, “MID”, “MAX”,

“ADVANCED”.

Advanced NR

Sets the three NR functions separately.

NOISE REDUCTION

ADVANCED

Press to select “ADVANCED”.

]

[

]

[

ADVANCED NR

VIDEO

ADVANCED NR

RGB

Press to enter ADVANCED NR.

VIDEO NR

MOSQUITO NR

BLOCK NR

OFF

VIDEO NR

MOSQUITO NR

BLOCK NR

OFF

Press to select VIDEO NR,

MOSQUITO NR or BLOCK NR.

Press to select “OFF”, “MIN”, “MID”,

“MAX”.

[

]

[

]

ADVANCED NR

COMPONENT

ADVANCED NR

Digital

VIDEO NR

MOSQUITO NR

BLOCK NR

OFF

VIDEO NR

MOSQUITO NR

BLOCK NR

OFF

VIDEO NR:

Automatically reduces unwanted picture noise.

MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.

BLOCK NR:

Reduces block noise when playing MPEG videos.

Notes:

• NOISE REDUCTION cannot be adjusted while a PC signal is being applied.

• BLOCK NR cannot be adjusted while a HD signal is being applied.

SET UP for Input Signals

SYNC

Select SIGNAL from the “SET UP” menu during RGB input signal.

[

]

SIGNAL

RGB

Press to select the “SYNC”.

SYNC

3 : 2 PULLDOWN

XGA MODE

AUTO

OFF

1024 × 768

Press to adjust.

Setting RGB sync signal

Conﬁrm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT

signal).

SYNC

AUTO

ON G

VBS

AUTO:

ON G:

VBS:

The H and V sync or synchronized signal are automatically selected.

If both input, it is selected the H and V sync.

Uses a synchronized signal on the Video G signal, which is input from

the G connector.

Uses a synchronized signal of Composite Sync input, which is input

from the HD connector.

Input signal display

Displays the frequency and the type of the current input signal.

This display is valid only for COMPONENT/RGB/PC and Digital input signal.

Display range:

H-FREQ. 63.98 kHz

V-FREQ. 60.02 Hz

SIGNAL FORMAT 1280×1024/60

Horizontal 15 - 110 kHz

Vertical

48 - 120 Hz

Options Adjustments

Options

Weekly Command Timer

Onscreen display

Initial INPUT

Initial VOL level

Maximum VOL level

INPUT lock

1/3

Press to display the SET UP menu.

Press to select “OSD LANGUAGE”.

Off

Button lock

Remocon User level

Advanced PIP

Press and hold until the Options menu is displayed.

Options

2/3

Press to select your preferred menu.

Off-timer function

Initial Power Mode

ID select

Enable

Normal

Remote ID

Off

Serial ID

Off

Press to adjust the menu.

Options

3/3

Slot power

Power On Screen Delay

Clock Display

All Aspect

Serial Slot Select

Off

Slot1

Press to exit from Options menu.

Item

Adjustments

Weekly Command Timer Sets Weekly Command Timer. (see page 37)

On: Displays all the following on screen.

• Power on display

• Input signal switch display

Onscreen display

• No signal display

• Mute and the remaining time of off-timer after

Off: Hides all the items above from view.

was pressed.

Off

INPUT1

INPUT2

INPUT3

Adjusts the input signal when the unit is turned on.

Notes:

• Only the adjusted signal is displayed. (see page 13)

• Signal can be displayed when the Terminal board is installed.

• This menu is available only when “INPUT lock” is “Off”.

Initial INPUT

• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.

(Ex. INPUT1A, INPUT1B)

Press

button to adjust the volume when the unit is turned on.

Off

Off: Sets normal volume.

On: Sets your preferred volume.

Notes:

Initial VOL level

•

When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.

• You can hear the changed volume regardless of your volume setting before opening the options menu if

you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.

Press

button to adjust the maximum volume.

Off

Off: Sets auto maximum volume.

On: Sets your preferred maximum volume.

Notes:

Maximum VOL level

• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically

becomes the same as the “Maximum VOL level”.

• The volume display can go up to 63 regardless of the settings.

• You can hear the changed volume regardless of your volume setting before opening the options menu if

you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.

Options Adjustments

Item

Adjustments

INPUT3

Off

INPUT1

INPUT2

Locks the input switch operation.

Notes:

• Only the adjusted signal is displayed (see page 13).

• Signal can be displayed when the Terminal board is installed.

• Input switch can be used when this is set to “Off”.

INPUT lock

• In two screen display mode, if anything other than “Off” is set, the value will be ﬁxed as the value input in

the single screen display mode.

• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.

(Ex. INPUT1A, INPUT1B)

Off

MENU&ENTER

Off: All the buttons on main unit can be used.

ENTER/■

MENU&ENTER: Locks

and

buttons on main unit.

On: Locks all the button on main unit.

Button lock

Sets Button lock with the unit buttons in the following procedure.

–

/▼

INPUT

ENTER/■

+/▲

Off: Press

four timesĺPress

+/▲

ENTER/■

INPUT

ENTER/■

MENU&ENTER: Press

four timesĺPress

+/▲

–

ENTER/■

/▼

ENTER/■

On: Press

four timesĺPress

Off User1

User2

User3

Off: You can use all of the buttons on the remote control.

User1:You can only use

buttons on the remote control.

Remocon User level

User2:You can only use

button on the remote control.

User3:Locks all the buttons on remote control.

Off: Sets normal two screen display mode (see page 17).

On: Sets Advanced PIP mode (see page 18).

Notes:

Advanced PIP

• When “INPUT lock” is “On”, you cannot use all the two screen display functions.

•

buttons are unavailable during Advanced PIP mode operation.

Enable: Enables the “Off-timer function”.

Off-timer function

Disable: Disables the “Off-timer function”.

Note:

When “Disable” is set, the Off-timer is cancelled.

Normal

Standby

Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.

Normal: Power returns in as the same state as before the power interruption.

Standby: Power returns in standby mode. (Power Indicator : red/orange)

Initial Power Mode

On:

Power returns in power On. (Power Indicator : green)

Note:

When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.

Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.

Set value range: 0 - 100

ID select

Remote ID

Serial ID

(Standard value: 0)

The setting of this menu is valid only when using ID remote control.

Off: Disables ID remote control functions. You can use normal remote control operations.

On: Enable ID remote control functions.

Sets the panel ID Control.

Off: Disables external control by the ID.

On: Enables the external control by the ID.

Off

Auto

Off: Power is not transmitted to the slot power.

Auto: Power is transmitted to the slot power only when main power is on.

On: Power is transmitted to the slot power when main power is on or in the standby state.

Note: In some cases, power is transmitted to the slot power when main power is on or in the standby state

regardless of the slot power setting.

Slot Power

Options Adjustments

Item

Adjustments

Off

3....

You can set the power-on delay time of the displays to reduce the power load, when you press POWER switch

to turn on the multiple displays that are set together.

Set each display’s setting individually.

Off:

The display will be turned on at the same time as POWER switch is pressed.

1 to 30 (sec.):Set the power-on delay time (second).

After pressing POWER switch, the display will be powered on with time delay depending on this

setting.

Power On Screen

Delay

Notes:

• During this function is working, the power indicator is blinking green.

• This function also works when the power recovers from failure or after plugging off and in again the power

cord.

After you unplug and plug the power cord in while the unit is in standby mode and also the power is being

supplied to a terminal board, the unit will start supplying the power to the board with time delay according

to the setting.

The power indicator lights up red ﬁrst and it turns orange when the power starts being supplied to the

board.

Off: Not display the clock.

On: Display the clock.

The clock is displayed at the lower left of the screen when

button is pressed.

Clock Display

10:00

Note: When “PRESENT TIME SETUP” is not set, the clock is not displayed even if “Clock Display” is “On”

(see page 25)

Sets All Aspect mode (advanced aspect setting) or default aspect mode.

With each press of

button, the aspect changes in the selected mode.

Off: Default aspect mode

On: All Aspect mode

All Aspect

Aspect mode of each setting is as follows:

(Example: HD signal)

Off

4:3ĺH-FILLĺZOOMĺFULLĺJUST

4:3 (1)ĺ4:3 (2)ĺ4:3 FullĺZoom1ĺZoom2ĺZoom3ĺ16:9ĺ14:9ĺJust1ĺJust2

Slot1

Slot2

Slot3

Serial Slot

Select

Selects the slot which communicates serial.

Note: The setting of an external command can be set only from the ﬁxed serial terminal. (see page 11)

Normalization

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote

ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

–

/▼

Press the

button on main unit together with

button on the remote control and hold for more than 5 seconds. The

“SHIPPING” menu is displayed and the lock is released when it disappears.

Options Adjustments

Weekly Command Timer

You can set 7-day timer programming by setting time and command.

Note:

Before setting Weekly Command Timer, set PRESENT TIME SETUP. (see page 25)

Press to select Function.

Options

1/3

Press to select “On”.

Weekly Command Timer

Onscreen display

Note:

Press ACTION ( ) button

• When Function is set to On, SET UP TIMER

(see page 25) is unavailable.

Weekly Command Timer

Function

Program1

Program3

---

Monday

Tuesday

Wednesday

Thursday

Friday

Press to select a day.

Program3

---

Press to select a program number.

Program6

Program4

Saturday

Sunday

Note:

Program Edit

• You can set the program from 1 to 7.

--- indicates unset.

Program number

Program3

---

Thursday

Friday

Saturday

Sunday

Press to select Program Edit.

Program6

Program4

Program Edit

Press to show the Program Edit screen.

Press to select Program.

Program Edit screen

1/8

Weekly Command Timer

Program

Press to change the program numbers (1-7).

8:00 PON

10:30 IMS:SL1

--:-- ---

Press to select a command number.

12:00 DAM:ZOOM

9:12 AVL:10

--:-- ---

Press to show the previous / next command

pages (1-8) of the selected program.

Press to show the command setting screen.

1/8

8/8

Weekly Command Timer

Program

Weekly Command Timer

Program

AVL:00

8:00 PON

20:00

20:30

DAM:NORM

10:30 IMS:SL1

--:-- ---

22:00 POF

--:-- ---

12:00 DAM:ZOOM

9:12 AVL:10

--:-- ---

Command (--- indicates unset)

Set time of timer (--:-- indicates unset)

Command numbers

Options Adjustments

Press to select Command No.

Command setting screen

Weekly Command Timer

Press to select a command number.

Program

Command No

Time

Command

10:30

IMS:SL1

Press to select Time / Command.

Weekly Command Timer

Program

Press to set each item.

10:30

IMS:SL1

Command No

Time

Command

Time: Set the time to execute a command program.

Pressing “ ” or “ ” button once changes “Time” 1

minute.

Pressing “ ” or “ ” button continuously changes “Time” by 15 minutes.

Command:Select a command to execute at the set time. This unit has 58 commands to set. (see

page 41)

Notes:

•

Command is performed in order of execution time, regardless of the command number.

• If a command execution time overlaps with that of other commands, these commands are

performed in number order.

• Pressing , Time becomes --:-- and Command becomes ---.

Note:

Press

to return to the previous screen.

Shipping condition

This function allows you to reset the unit to the factory setting.

SET UP

1/2

Press to display the SET UP menu.

SIGNAL

COMPONENT/RGB-IN SELECT

RGB

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

Press to select “OSD LANGUAGE”.

OFF

(

)

Press and hold till the SHIPPING menu is displayed.

ENGLISH US

Press to select “YES”.

Press to conﬁrm.

YES

SHIPPING

[from the unit]

1 Press the MENU button till the SET UP menu is displayed.

2 Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.

3 Press and hold the ENTER button till the SHIPPING menu is displayed.

4 Press the Volume Up “+” or Down “–” button to select “YES”.

5 Press the ENTER button and wait for 10 sec.

Note:

Press the R button to return to SET UP menu when SHIPPING menu is displayed.

Troubleshooting

Before you call for service, determine the symptoms and make a few simple checks as shown below.

Symptoms

Checks

Picture

Sound

Electrical Appliances

Cars / Motorcycles

Fluorescent light

Interference

Noisy Sound

Volume

Normal Picture

No Picture

No Sound

(Check whether the mute function has been activated on the remote control.)

Not plugged into AC outlet

Not switched on

PICTURE and BRIGHTNESS/Volume setting

(Check by pressing the power switch or stand-by button on the remote control.)

If a signal with a non-applicable color system format, or frequency is input, only the input

terminal indication is displayed.

No Picture

No Color

Normal Sound

Color controls set at minimum level. (see page 22, 23)

COLOR SYSTEM (see page 31)

No remote control operations can be performed.

Check whether the batteries have discharged completely and, if they have not, whether they

were inserted properly.

Check whether the remote control sensor is exposed to an outdoor light or a strong ﬂuorescent

light.

Check whether the remote control designed speciﬁcally for use with the unit is being used.

(The unit cannot be operated by any other remote control.)

A cracking sound is sometimes heard from the unit. If there is nothing wrong with the picture or sound, this is the sound of the cabinet undergoing

very slight contractions in response to changes in the room temperature. There are no adverse

effects on the performance or other aspects.

The top or bottom of the picture on the screen is cut Adjust the position of the picture on the screen.

off when I use the zoom function.

Areas at the top and bottom of the screen where When using a video software program (such as a cinema size program) with a screen wider

the image is missing appear when I use the zoom than one in the 16:9 mode, blank areas separate from the images are formed at the top and

function.

bottom of the screen.

This LCD Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of input signal.

However, this is not a malfunction.

LCD Display panel

Symptoms

Check

It takes a while for the picture to appear.

The unit digitally processes the various signals in order to reproduce esthetically pleasing

images. As such, it sometimes takes a few moments for the picture to appear when the power

has been turned on, when the input has been switched or when the images for the main picture

and sub picture on the two screens are swapped.

The edges of the images ﬂicker.

Due to the characteristics of the system used to drive the panel, the edges may appear to ﬂicker

in the fast-moving parts of the images: This is normal and not indicative of malfunctioning.

The brightness on both sides of images in 4:3 mode When viewing the side panels at the “BRIGHT” or “MID” setting, the brightness on both sides

changes.

may change depending on the kind of program shown: This is normal and not indicative of

malfunctioning.

There may be red spots, blue spots, green spots and This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel

black spots on the screen.

is built with very high precision technology giving you ﬁne picture details. Occasionally, a few

non-active pixels may appear on the screen as ﬁxed points of red, blue, green, or black.

Please note this does not affect the performance of your LCD.

Image retention may occur. If you display a still picture for an extended period, the image

might remain on the screen. However, it will disappear after a while. This is not considered

as malfunction.

Image retention appears

List of Aspect Modes

Aspect mode

Description

All Aspect: Factory setting

Picture

Enlarged screen

All Aspect: Off

The display of the pictures ﬁlls the screen.

In the case of SD signals, pictures with a 4:3 aspect ratio are

enlarged horizontally, and displayed. This mode is suited to

displaying anamorphic pictures with a 16:9 aspect ratio.

16:9

FULL

Letterbox pictures with a 14:9 aspect ratio are enlarged

vertically and horizontally so that their display ﬁlls the

screen vertically and is slightly smaller than the screen

horizontally. The top and bottom edges of the pictures are

cut off. Side panels are displayed at the left and right edges

of the screen.

14:9

–

Pictures with a 4:3 aspect ratio are enlarged horizontally

so that the picture distortion is minimized. The display of

the areas around the left and right edges of the screen is

slightly elongated.

Just

JUST

4:3

Just1

Pictures with a 4:3 aspect ratio are enlarged horizontally

so that the picture distortion is minimized. The left and right

edges of the pictures are cut off. The display of the areas

around the left and right edges of the screen is slightly

elongated.

Just2

Pictures with a 4:3 aspect ratio are displayed with their

original aspect ratio. Side panels are displayed at the left

and right edges of the screen.

4:3

4:3 (1)

Pictures with a 4:3 aspect ratio are displayed with their

original aspect ratio. The left and right edges of the pictures

are masked by side panels.

4:3 (2)

4:3

Pictures with a 4:3 aspect ratio are enlarged horizontally so

that their display ﬁlls the screen. The left and right edges of

the pictures are cut off.

4:3 Full

H-FILL

ZOOM

Letterbox pictures with a 16:9 aspect ratio are enlarged

vertically and horizontally so that their display ﬁlls the screen.

The top and bottom edges of the pictures are cut off.

Zoom

Zoom1

Letterbox pictures with a 16:9 aspect ratio are enlarged

vertically and horizontally so that their display ﬁlls the screen.

The top and bottom edges as well as the left and right edges

of the pictures are cut off.

Zoom2

Zoom3

ZOOM

–

Letterbox pictures with a 2.35:1 aspect ratio are enlarged

vertically and horizontally so that their display ﬁlls the screen

vertically and is slightly larger than the screen horizontally.

The top and bottom edges as well as the left and right edges

of the pictures are cut off.

PC input signals

Applicable input signals for Mini D-sub 15P (Component) / Mini D-sub 15P (RGB) (* Mark)

ꢁ

Horizontal

frequency

(kHz)

Vertical

frequency

(Hz)

Dot clock

frequency

(MHz)

Mini D-sub 15P Mini D-sub 15P

Signal name

(Component)

(RGB)

525 (480) / 60i

525 (480) / 60p

625 (575) / 50i

625 (575) / 50p

750 (720) / 60p

15.73

31.47

15.63

31.25

45.00

37.50

67.50

33.75

56.26

28.13

27.00

33.75

28.13

27.00

31.25

31.46

31.47

37.86

37.50

43.27

31.47

35.16

37.88

48.08

46.88

53.67

48.36

56.48

60.02

68.68

67.50

47.70

60.00

85.94

63.98

79.98

91.15

75.00

81.25

37.64

48.36

35.00

49.72

68.68

59.94

50.00

60.00

50.00

60.00

50.00

47.92

30.00

25.00

24.00

50.00

70.07

59.94

72.81

75.00

85.01

59.94

56.25

60.32

72.19

75.00

85.06

60.00

70.07

75.03

85.00

75.00

60.00

85.00

60.02

75.03

85.02

60.00

65.00

59.94

60.00

66.67

74.54

75.06

13.5

27.0

13.5

ꢁ

ꢀ

27.0

74.25

148.5

74.25

148.5

74.25

25.17

25.18

31.5

36.0

33.54

36.0

40.0

50.0

49.5

56.25

65.0

75.0

750 (720) / 50p

1,125 (1,080) / 60p

1,125 (1,080) / 60i

1,125 (1,080) / 50p

1,125 (1,080) / 50i

1,125 (1,080) / 24sF

1,125 (1,080) / 30p

1,125 (1,080) / 25p

1,125 (1,080) / 24p

1,250 (1,080) / 50i

640 × 400 @70 Hz

640 × 480 @60 Hz

640 × 480 @72 Hz

640 × 480 @75 Hz

640 × 480 @85 Hz

852 × 480 @60 Hz

800 × 600 @56 Hz

800 × 600 @60 Hz

800 × 600 @72 Hz

800 × 600 @75 Hz

800 × 600 @85 Hz

1,024 × 768 @60 Hz

1,024 × 768 @70 Hz

1,024 × 768 @75 Hz

1,024 × 768 @85 Hz

1,152 × 864 @75 Hz

1,280 × 768 @60 Hz

1,280 × 960 @60 Hz

1,280 × 960 @85 Hz

1,280 × 1,024 @60 Hz

1,280 × 1,024 @75 Hz

1,280 × 1,024 @85 Hz

1,600 × 1,200 @60 Hz

1,600 × 1,200 @65 Hz

1,066 × 600 @60 Hz

1,366 × 768 @60 Hz

Macintosh13” (640 × 480)

Macintosh16” (832 × 624)

Macintosh21” (1,152 × 870)

ꢁ

ꢀ

ꢁ

ꢀ

ꢁ

ꢀ

78.75

94.5

108.0

80.14

108.0

148.5

108.0

135.0

157.5

162.0

175.5

53.0

86.71

30.24

57.28

100.0

Based on SMPTE 274M standard.

^ꢀꢀ^1:

ꢀ^{2: Based on SMPTE RP211 standard.}

ꢀ³4^:: ^{Based on SMPTE 295M standard.}

When selected the RGB format and 525p signal input to the Mini D-sub 15P terminal, it is recognized as VGA 60Hz signal.

ꢀ5: When inputted VGA 60Hz format signal from the other than Mini D-sub 15P terminal, it is recognized as 525p signal.

Note: Signals without above speciﬁcation may not be displayed properly.

Command list of Weekly Command Timer

No.

Command

AAC:MENCLR

AAC:MENDYN

AAC:MENSTD

AAC:SURMON

AAC:SUROFF

AMT:0

Control details

Audio Menu (Clear)

Audio Menu (Dynamic)

Audio Menu (Standard)

Surround (ON)

Surround (OFF)

Audio Mute (OFF)

Audio Mute (ON)

AMT:1

ASO:M

Audio out when PIP mode (Main Picture)

Audio out when PIP mode (Sub Picture)

Audio Volume (00)

ASO:S

AVL:00

AVL:10

Audio Volume (10)

AVL:20

Audio Volume (20)

AVL:30

Audio Volume (30)

AVL:40

Audio Volume (40)

AVL:50

Audio Volume (50)

AVL:60

Audio Volume (60)

DAM:FULL

DAM:JUST

DAM:NORM

DAM:SELF

DAM:ZOOM

DWA:OFF

DWA:OVL1

DWA:OVL2

DWA:OVL3

DWA:OVL4

DWA:OVL5

DWA:OVL6

DWA:OVLOF

DWA:OVLON

DWA:PIN0

DWA:PIN1

DWA:PIN2

DWA:PIN3

DWA:PIP

DWA:POP

DWA:SWP

DWA:TWN

IMS:PC1

Aspect (FULL)

Aspect (JUST)

Aspect (4:3)

Aspect (Panasonic Auto)

Aspect (ZOOM)

Dual Picture mode (OFF)

Advanced PIP mode (1) (see page 18)

Advanced PIP mode (2) (see page 18)

Advanced PIP mode (3) (see page 18)

Advanced PIP mode (4) (see page 18)

Advanced PIP mode (5) (see page 18)

Advanced PIP mode (6) (see page 18)

Advanced PIP mode (OFF) (normal two screen display mode)

Advanced PIP mode (ON)

The location of the sub picture (lower right)

The location of the sub picture (lower left)

The location of the sub picture (upper left)

The location of the sub picture (upper right)

Dual Picture mode (Picture in Picture)

Dual Picture mode (Picture out Picture)

Swap main picture and sub picture when PIP mode

Dual Picture mode (Picture and Picture)

Input select (PC1) (Main Picture when PIP mode)

Input select (SLOT1) (Main Picture when PIP mode)

Input select (SLOT1A) (Main Picture when PIP mode)

Input select (SLOT1B) (Main Picture when PIP mode)

Input select (SLOT2) (Main Picture when PIP mode)

Input select (SLOT2A) (Main Picture when PIP mode)

Input select (SLOT2B) (Main Picture when PIP mode)

Input select (SLOT3) (Main Picture when PIP mode)

Sub Picture Input Select (PC1)

Sub Picture Input Select (SLOT1)

Sub Picture Input Select (SLOT1A)

Sub Picture Input Select (SLOT1B)

Sub Picture Input Select (SLOT2)

Sub Picture Input Select (SLOT2A)

Sub Picture Input Select (SLOT2B)

Sub Picture Input Select (SLOT3)

Reserved

IMS:SL1

IMS:SL1A

IMS:SL1B

IMS:SL2

IMS:SL2A

IMS:SL2B

IMS:SL3

ISS:PC1

ISS:SL1

ISS:SL1A

ISS:SL1B

ISS:SL2

ISS:SL2A

ISS:SL2B

ISS:SL3

ꢀ

—

ꢀ

Reserved

—

POF

PON

Power OFF

Power ON

ꢀ

Reserved

—

ꢀ

Reserved

—

ꢀ

Reserved

—

ꢀ

Reserved

—

ꢀ

VMT:0

VMT:1

Picture Mute (OFF)

Picture Mute (ON)

1 These commands cannot be selected on this model.

ꢀ

2 Picture Mute cannot be unlocked by powering off/on with the remote control. Turn off and on again with the button

on the unit or enter the command VMT:0 to unlock Picture Mute.

Speciﬁcations

TH-32LR11UK, TH-32LR11UH

Power Source

Power Consumption

Power on

110 - 127 V AC, 50/60 Hz

160 W

Stand-by condition

Power off condition

Aspect Ratio

Save OFF 1.1 W, Save ON 0.4 W

0.1 W

16:9

Screen size

27.5” (698 mm) (W) × 15.4” (392 mm) (H) × 31.5” (800 mm) (diagonal)

1,049,088 (1,366 (W) × 768 (H)) [4,098 × 768 dots]

(No.of pixels)

Operating condition

Temperature

32 °F - 104 °F (0 °C - 40 °C)

20 % - 80 %

Humidity

Applicable signals

Scanning format

525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i · 50p

· 24p · 25p · 30p · 24sF, 1250 (1080) / 50i

PC signals

VGA, SVGA, XGA,

SXGA, UXGA ···· (compressed)

Horizontal scanning frequency 15 - 110 kHz

Vertical scanning frequency 48 - 120 Hz

Connection terminals

PC IN

(HIGH-DENSITY MINI D-SUB 15PIN)

Y or G with sync 1.0 Vp-p (75 ȍ)

Y or G without sync 0.7 Vp-p (75 ȍ)

B/P^B/CB: 0.7 Vp-p (75 ȍ)

R/P^R/CR: 0.7 Vp-p (75 ȍ)

HD/VD: 1.0 - 5.0 Vp-p (high impedance)

0.5 Vrms

AUDIO IN (M3 JACK)

SERIAL

Dimensions (W × H × D)

Including pedestal

EXTERNAL CONTROL TERMINAL (D-SUB 9PIN)

RS-232C COMPATIBLE

31.2'' (791 mm) × 24.3'' (615 mm) × 11.9'' (300 mm)

31.2'' (791 mm) × 22.2'' (563 mm) × 4.3'' (108 mm)

(5.3'' (132.7 mm) when including protruding portion of slots)

Display Set only

Mass (weight)

Including pedestal

Display Set only

Sound

approx. 48.5 lbs

approx. 40.8 lbs

Speaker

4.8 ” (120 mm) × 2.4 ” (60 mm) × 2 pcs, 6 ȍ

Audio Output

16 W [8 W + 8 W] (10 % THD)

Note:

Design and speciﬁcations are subject to change without notice. Mass and dimensions shown are approximate.

This product has a ﬂuorescent lamp that contains mercury.

Disposal may be regulated in your community due to environmental

considerations. For disposal or recycling information, please contact your local

authorities, or the Electronic Industries Alliance:

http://www.eiae.org.

Customer’s Record

The model number and serial number of this product can be found on its back cover. You should note this serial number

in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase

to aid in identiﬁcation in the event of theft or loss, and for Warranty Service purposes.

Model Number

Serial Number

Panasonic Corporation 2008

Panasonic Professional Display Company

Unit of Panasonic Corporation of North America

Executive Ofﬁce :

One Panasonic Way 1F-10, Secaucus, NJ 07094

EASTERN ZONE : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621

Mid-Atlantic/New England : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621

Southeast Region : 1225 Northbrook Parkway, Ste 1-160 Suwanee GA 30024 (770)338-6835

Central Region : 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847)468-5200

WESTERN ZONE : 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500

Dallas Region : 6226 Abington Way, Houston, TX 77008 (713) 802-2726

No. CA/Northwest Region : 5870 Stone Ridge, #3, Pleasanton, CA (925) 416-5108

Government Marketing Department : 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840

Panasonic Canada Inc.

5770 Ambler Drive

Mississauga, Ontario

L4W 2T3

HP Hewlett Packard V185W User Manual
Kuppersbusch USA BEDIENUNGSANWEISUNG EKI 807 2 User Manual
Moffat Blue Seal E516B CB User Manual
Motorola 68HC12B32 User Manual
NEC MultiSync Monitor EX231WP BK User Manual
Panasonic TX 29FX20 Series User Manual
Panasonic TX 76PW100A User Manual
Philips 19B4L User Manual
Philips 32PW9309 User Manual
Philips 170S8 User Manual