Panasonic DMR E20 User Manual
DVD VIDEO RECORDER  
Operating Instructions  
Model No. DMR-E20  
This unit responds to the region number information on  
DVD-Video. The unit can only play DVD-Video if the re-  
gion number of the disc matches the region number of  
this unit. See page 6 for details.  
Before connecting, operating or adjusting this product, please read  
these instructions completely.  
Please keep this manual for future reference.  
[For\U.S.A.]  
The servicenter list and warranty can be found  
on pages 103 and 105.  
[For\Canada]  
The warranty can be found on page 104.  
En las páginas 106 y 107 hay una guía de re-  
ferencia rápida en español.  
D
This manual was printed with soy based ink.  
RQT6035-P  
IMPORTANT SAFETY INSTRUCTIONS  
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the  
applicable safety instructions listed below. Keep these operating instructions handy for future reference.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
10) Protect the power cord from being walked on or  
pinched particularly at plugs, convenience recepta-  
cles, and the point where they exit from the  
apparatus.  
11) Only use attachments/accessories specified by the  
manufacturer.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
12) Use only with the cart, stand, tripod,  
bracket, or table specified by the man-  
ufacturer, or sold with the appara-  
tus. When a cart is used, use caution  
when moving the cart/apparatus com-  
bination to avoid injury from tip-over.  
Gingsarted  
7) Do not block any ventilation openings. Install in ac-  
cordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radia-  
tors, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
13) Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
9) Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding-  
type plug has two blades and a third grounding  
prong. The wide blade or the third prong are provid-  
ed for your safety. If the provided plug does not fit  
into your outlet, consult an electrician for replace-  
ment of the obsolete outlet.  
14) Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord  
or plug is damaged, liquid has been spilled or ob-  
jects have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does not op-  
erate normally, or has been dropped.  
The model number and serial number of this product can be  
found on either the back or the bottom of the unit.  
Please note them in the space provided below and keep for  
future reference.  
CAUTION!  
DO NOT INSTALL, OR PLACE THIS UNIT, IN A BOOK-  
CASE, BUILT-IN CABINET OR IN ANOTHER CONFINED  
SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO  
PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD  
DUE TO OVERHEATING, ENSURE THAT CURTAINS AND  
ANY OTHER MATERIALS DO NOT OBSTRUCT THE VEN-  
TILATION VENTS.  
MODEL NUMBER!  
SERIAL NUMBER  
DMR-E20  
User memo:  
THE FOLLOWING APPLIES ONLY IN THE U.S.A.  
DATE OF PURCHASE  
DEALER NAME  
DEALER ADDRESS  
Note to CATV system installer:  
This reminder is provided to call the CATV system installer’s  
attention to Article 820-40 of the NEC that provides guide-  
lines for proper grounding and, in particular, specifies that the  
cable ground shall be connected to the grounding system of  
the building, as close to the point of cable entry as practical.  
TELEPHONE NUMBER  
Do not place the unit  
on amplifiers or equip-  
ment that may become  
DO NOT PLACE THIS APPARATUS INTO AN AUDIO  
RACK, BOOK SHELF OR SIMILAR LOCATION BECAUSE  
OF HEAT FROM THIS APPARATUS.  
hot.  
The heat can damage the unit.  
DO NOT BLOCK ANY OF THE VENTILATION OPENINGS.  
INSTALL IN ACCORDANCE WITH THE MANUFACTUR-  
ER’S INSTRUCTIONS.  
(U.S.A. only)  
Product Registration Card  
Please complete and return the included product registration card, or register via the Internet at:  
http://www.panasonic.com/host/consumer.html  
3
RQT6035  
Table of contents  
Using the direct navigator . . . . . . . . . . . . . . . . 156  
Selecting programs to play . . . . . . . . . . . . . . . . . . . . . . . . . . . 156  
Erasing programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158  
Entering and editing program titles. . . . . . . . . . . . . . . . . . . . . 159  
Protecting programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160  
Releasing program protection . . . . . . . . . . . . . . . . . . . . . . . . 161  
Checking program contents . . . . . . . . . . . . . . . . . . . . . . . . . . 162  
Erasing parts of a program—Shorten Segment . . . . . . . . . . 163  
Getting started  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112  
IMPORTANT SAFETY INSTRUCTIONS . . . . . . 113  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115  
Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116  
Control reference guide . . . . . . . . . . . . . . . . . . 118  
Set up steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110  
The remote control . . . . . . . . . . . . . . . . . . . . . . 112  
Antenna and television connections . . . . . . . . 114  
Plug-in Auto Tuning . . . . . . . . . . . . . . . . . . . . . 016  
Using play lists to edit programs . . . . . . . . . . . 165  
Displaying play lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165  
Creating play lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166  
Playing play lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167  
Playing play list scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168  
Editing play list scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168  
Copying play lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172  
Erasing a play list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172  
Titling play lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173  
Checking play list contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 174  
Channel settings . . . . . . . . . . . . . . . . . . . . . . . . 118  
Using the remote control to add and delete channels . . . . . . 018  
VCR Plusi guide channel settings . . . . . . . . . . . . . . . . . . . . 019  
Gnigsarted  
Selecting TV screen type . . . . . . . . . . . . . . . . . 121  
Basic operations  
Home Theater  
Playing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 122  
Starting play from where you stopped it  
Expanding your home theater system . . . . . . . 175  
Connecting a cable TV box . . . . . . . . . . . . . . . . . . . . . . . . . . 176  
Connecting a home satellite system (Dishnetwork/DSS) . . . 177  
Connecting to a digital amplifier or system component . . . . . 178  
Connecting an analog amplifier or system component . . . . . 178  
Connecting a video cassette recorder . . . . . . . . . . . . . . . . . . 179  
When you can’t directly connect the antenna you  
disconnected from your television to the unit . . . . . . . . . . . 180  
When you can’t directly connect the included 75 - coaxial  
cable to the television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180  
Operating other Panasonic DVD equipment with the remote  
control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181  
(Resume Function) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 023  
Fast forward and rewind—SEARCH . . . . . . . . . . . . . . . . . . . 024  
Slow-motion play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 024  
Frame-by-frame viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 024  
Skipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 025  
Starting play from a selected program, title, chapter, or  
track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 025  
Recording television programs . . . . . . . . . . . . 126  
One Touch Recording—Specify a time to stop  
recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 027  
Advanced operations  
Initial settings  
Playing while you are recording. . . . . . . . . . . . 128  
Playing from the beginning of the program you are  
recording—Chasing play . . . . . . . . . . . . . . . . . . . . . . . . . . 028  
Simultaneous rec and play . . . . . . . . . . . . . . . . . . . . . . . . . . . 028  
Reviewing the recorded images while recording  
Changing the unit’s settings . . . . . . . . . . . . . . 182  
Summary of settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182  
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185  
Entering a password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186  
Digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186  
Clock Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187  
Channel Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190  
(Time Slip) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 029  
Using the top window . . . . . . . . . . . . . . . . . . . . 130  
Convenient features . . . . . . . . . . . . . . . . . . . . . 132  
Skipping a minute forward—CM skip . . . . . . . . . . . . . . . . . . . 132  
Selecting an amount of time to skip—Time Slip . . . . . . . . . . 032  
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 033  
A-B repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 033  
Changing audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134  
Marking places to play again—MARKER . . . . . . . . . . . . . . . 136  
Program play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138  
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139  
Enjoying virtual surround sound effects (V.S.S.) . . . . . . . . . . 039  
Reference  
On-screen displays . . . . . . . . . . . . . . . . . . . . . . 194  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 195  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196  
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . 197  
Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . 198  
Self-diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . 198  
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . 199  
Troubleshooting guide . . . . . . . . . . . . . . . . . . . 100  
Product Service . . . . . . . . . . . . . . . . . . . . . . . . . 102  
Limited Warranty (For U.S.A.). . . . . . . . . . . . . . 103  
Limited Warranty (For CANADA) . . . . . . . . . . . 104  
Servicenter List (ONLY FOR U.S.A.) . . . . . . . . 105  
Using on-screen menu icons . . . . . . . . . . . . . . 140  
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . . 143  
Using VCR Plusi codes to make timer recording . . . . . . . . . 143  
Manually programming the unit to make timer recording. . . . 146  
To delete a timer recording program . . . . . . . . . . . . . . . . . . . 147  
To check programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148  
Releasing the unit from timer standby . . . . . . . . . . . . . . . . . . 148  
Recording from a video cassette recorder . . . 149  
Guía de referencia rápida en español . . . . . . . 106  
(Spanish Quick Reference)  
Disc setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150  
Enter Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150  
Entering characters for titles . . . . . . . . . . . . . . . . . . . . . . . . 151  
Disc Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152  
Releasing disc protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153  
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154  
Finalize—Creating DVD-Video . . . . . . . . . . . . . . . . . . . . . . . . 155  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover  
4
RQT6035  
Features  
This unit allows recording of high quality video on  
DVD-RAM, the compact and durable digital media with  
fast random access. This media also outdoes past tape  
formats in ease of operation.  
Symbols used in these operating  
instructions  
º Top window  
º Watch a program while you are record-  
is used to indicate operations you can access from  
the top window, such as the direct navigator and  
play list screen.  
ing it  
TOP  
Chasing play  
You can watch a program from the start while you are still recording  
º!T?roubleshooting  
it (➡ page 28).  
Simultaneous rec and play  
You can record a program while watching one you recorded previ-  
ously (➡ page 28).  
is used to indicate ways to fix potential problems.  
º Discs you can use  
The features you can use with the different types of discs are  
indicated as follows.  
Time Slip  
Gingsarted  
You can jump back 30 seconds to review a piece of action you  
missed while recording by pressing the Time Slip button (can be set  
between 1 minute and 360 minutes: ➡ page 29).  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
º Maximum 12 hours on DVD-RAM  
³Using a double-sided, 9.4 GB DVD-RAM allows you to record a  
maximum of 12 hours.  
DVD-RAM DVD-R  
DVD-Video Audio Video  
CDs CDs  
³When using a 4.7 GB DVD-RAM or a DVD-R, you can get 1 hour  
recording using the XP high picture quality mode, 2 hours with the  
regular SP mode, 4 hours with the long LP mode, and 6 hours with  
the extra long EP mode.  
³There is also the FR (flexible recording) mode you can use with  
timer recording to fit recordings efficiently onto the available space  
on the disc.  
For your reference  
³[DVD-R] indicates DVD-R that have not yet been finalized  
(➡ pages 55 and 96) and can still be recorded on.  
³DVD-R that have been finalized can use the same features  
as DVD-Video. (Refer to features indicated [DVD-V].)  
º The Top Window shows you most of the  
Operation  
features you can use (➡ page 30)  
The top window has most of the features and functions you are likely  
to use regularly. Just select the icon for the operation you want to  
perform.  
These operating instructions describe operations mainly us-  
ing the remote control. If the name of the button is the same,  
the operation described can also be performed with the main  
unit.  
º Make your own DVD-Video  
³This unit records to DVD-R following the DVD-Video specifications  
so you can make your own DVD-Video (➡ page 7).  
³The encoder system used for recording is called “Hybrid VBR”  
which allows high quality recordings.  
Displays  
The displays shown in these instructions are examples only.  
Actual displays depend on the disc and the operations you  
are performing.  
º Exceptional picture and sound quality  
when recording  
³Audio is recorded using Dolby Digital stereo, enabling high quality  
sound recordings.  
³As well as being able to play DVD-Video movie software, this unit  
can also play other types of discs including audio CDs and video  
CDs. This means your recorder will be the center of your home  
entertainment, from high-end home theater through to CD play.  
Getting the most from the versatility of  
DVD-RAM and DVD-R  
VCR Plusi and PlusCode are registered trademarks of  
Gemstar Development Corporation. The VCR Plusi system  
is manufactured under license from Gemstar Development  
Corporation.  
º Fast access to the program you want to  
watch (➡ page 56)  
Use the direct navigator to find a program you have recorded and  
start play.  
Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and  
4,706,121  
º Edit scenes freely (➡ page 65) [RAM]  
Use play lists to select your favorite scenes and rearrange them to  
play in any order you like. Pick out scenes from a music or sports  
show and create a collection of your favorite scenes, or take the  
images you have shot with a video camera and edit them into a  
movie of your own creation.  
Manufactured under license from Dolby Laboratories.  
“Dolby”, “Pro Logic” and the double-D symbol are trademarks  
of Dolby Laboratories.  
“DTS”, “DTS Digital Surround” and “DTS Digital Out” are reg-  
istered trademarks of Digital Theater Systems, Inc.  
5
RQT6035  
Discs  
!?  
Discs you can use for recording and play  
This unit cannot record onto CD-R, CD-RW or authoring  
DVD-R.  
Logos for discs you can record on and play  
DVD-RAM  
[4.7 GB/9.4 GB, 12 cm (5q)]  
DVD-R (➡ page 7)  
[4.7 GB for General Ver. 2.0]  
Note  
³Do not allow the disc to become dirty or scratched. Fingerprints,  
dirt, dust, and scratches on the recording surface may make it im-  
possible to use the disc for recording.  
[2.8 GB, 8 cm (3q)]  
³If you use DVD-RAM with cartridges, you can protect your record-  
ings with the write-protect tab (➡ page 99). With the tab in the pro-  
tect position, you cannot record to the disc, delete programs with  
the direct navigator, edit with the play list screen, or format the  
disc.  
³This unit is compatible with both non-cartridge and cartridge  
DVD-RAM, but cartridge-type discs give better protection to your  
valuable recordings.  
The manufacturer accepts no responsibility and offers  
no compensation for loss of recorded or edited material  
due to a problem with the unit or disc, and accepts no  
responsibility and offers no compensation for any sub-  
sequent damage caused by such loss.  
Gnigsarted  
Examples of causes of such losses are  
For your reference  
1. A disc recorded and edited with this unit is played in a  
DVD recorder or computer disc drive manufactured by an-  
other company.  
2. A disc used as described in 1 and then played again in  
this unit.  
3. A disc recorded and edited with a DVD recorder or com-  
puter disc drive manufactured by another company is  
played in this unit.  
³DVD-RAM recorded on this unit cannot be played on  
incompatible players (including players manufactured by  
Panasonic).  
³Using a Panasonic DVD-RAM, you can record broadcasts that  
allow you to make one copy, such as some CATV broadcasts.  
³See page 7 for more details about DVD-R.  
!?  
Play-only discs  
Playing CD-R and CD-RW  
Logos for discs you can play  
This unit can play CD-DA (digital audio) and Video CD format  
audio CD-R and CD-RW that have been finalized upon com-  
pletion of recording.  
DVD-Video  
Video CD  
Audio CD  
It may not be able to play some CD-R or CD-RW due to the  
condition of the recording.  
Note  
The producer of the material can control how DVD-Video and Video  
CDs are played. This means that you may not be able to control play  
of a disc with some operations described in these operating instruc-  
tions. Read the disc’s instructions carefully.  
Region Management Information  
(DVD-Video only)  
This unit responds to the Region Management In-  
formation recorded on DVD-Video. This unit’s re-  
gion number is “1”. You cannot play the disc if the  
region number on the DVD-Video does not corre-  
spond to the region number on the unit.  
!?  
1
ALL  
You can play discs with labels containing the re-  
gion number “1” and “ALL”. Read the disc’s instruc-  
tions carefully.  
1
3
4
!?  
Discs that cannot be played  
³DVD-Video with a region number other than “1” or “All”  
³PAL discs  
³Some DVD-R (➡ page 7)  
³DVD-RAM (2.6 GB/5.2 GB)  
³DVD-ROM  
³CD-G  
³DVD-RW  
³Photo CD  
³DVD-Audio  
³CVD  
³iRW  
³SVCD  
³CD-ROM  
³CDV  
³SACD  
³MV-Disc  
³PD  
³Divx Video Disc, etc.  
6
RQT6035  
!?  
DVD-R  
You can play DVD-R by finalizing (➡ pages 55 and 96) them on this unit, effectively making them into DVD-Video.  
º Before finalizing…  
You can record onto the available space on the disc and perform editing functions, such as giving titles to discs and programs and erasing  
programs.  
³You cannot record to or edit DVD-R with this unit if it was recorded with another unit, whether it is finalized or not.  
³You cannot record over parts that have been recorded.  
³Erasing programs will not increase the disc’s available time.  
º After finalizing…  
The video and audio is recorded according to the DVD-Video specifications, and your very own DVD-Video is created.  
³The titles you entered with this unit appear as menus.  
³Programs longer than 5 minutes are divided into about five-minute chapters.  
³These DVD-R can no longer be recorded on or edited.  
Gingsarted  
³These DVD-R can be played on other DVD players, but this is not guaranteed.  
Play may not be possible due to the player you are using, the DVD-R, or the condition of the recording. Use this unit to play the disc if the player  
is unable.  
Visit Panasonic’s homepage for more information about DVDs.  
http://www.panasonic.com/playDVD-R  
º Recording to DVD-R  
³It takes about 30 seconds for the unit to complete recording management information after recording finishes.  
³To record on DVD-R, this unit optimizes the disc for each recording. Optimizing is carried out when you start recording after inserting the disc or  
turning the unit on. Recording may become impossible after the disc is optimized more than 50 times.  
³The first 30 seconds of a program may not be recorded if you make successive timer recordings.  
³The video is recorded in a 4:3 aspect irrespective of the video signal input.  
³You cannot change audio type if a DVD-R is in the unit. Select the audio type (Main or SAP) before recording by going to “MTS Selection for  
DVD-R Disc” in the Audio ACTION menu (➡ page 83).  
³Some broadcasts carry signals that allow you to make one copy, but you cannot record these broadcasts with DVD-R. Use DVD-RAM to record  
these kinds of broadcast.  
³Play may be impossible in some cases due the condition of the recording.  
³We recommend using DVD-R manufactured by Panasonic as they have been tested to be compatible with this unit (➡ see below).  
Discs manufactured by other companies may not be used to full capacity.  
Audio format logos  
: Dolby Digital (➡ pages 75 and 96)  
This unit can play Dolby Digital in stereo  
(2 channels). Connect an amplifier with a built-in  
Dolby Digital decoder to enjoy surround sound.  
: DTS Digital Surround (➡ pages 75 and 96)  
Connect this unit to equipment that has a DTS  
decoder to enjoy DVDs with this mark.  
Recommended DVD-RAM and DVD-R  
³DVD-RAM  
9.4-GB, double-sided, type 4 cartridge: LM-AD240U  
4.7-GB, single-sided, type 2 cartridge: LM-AB120U  
4.7-GB, single-sided, non-cartridge:  
LM-AF120U  
(set of 3,  
LM-AF120U3)  
³DVD-R  
4.7-GB, single-sided, non-cartridge:  
LM-RF120U  
7
RQT6035  
Control reference guide  
C
TV  
CH  
VOL  
POWER  
TV/AV  
D
E
1
F
O
OPEN/CLOSE  
POWER  
6
P
P
Q
@
R
S
A
1
2 3 4  
5
6 789  
:
G
H
=
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
B
7
STOP  
PAUSE  
PLAY  
TIME SLIP  
9
8
POWER  
/I  
REC MODE  
CH  
REC  
OPEN/CLOSE  
1
4
2
5
8
0
3
6
RETURN  
ENTER  
TOP  
WINDOW  
T
I
2
4
J
K
L
7
9
Gnigsarted  
VCR Plus+  
100  
DVD  
CH  
U
3
V
W
X
Y
Z
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
;
<
= >?@ AB  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
M
N
Buttons such as 1 function the same  
as the controls on the unit.  
Main unit  
Remote control  
Page  
Page  
1 POWER button (ê/I, POWER) . . . . . . . . . . . . . . . . . . . . . . . 16  
Press to switch the unit from ON to STANDBY mode or vice versa.  
In standby mode, the unit is still consuming a small amount of power.  
2 Recording mode button (REC MODE) . . . . . . . . . . . . . . . . 26  
3 Channel buttons (X, W, CH) . . . . . . . . . . . . . . . . . . . . . . . . . 26  
4 Recording button (´, [REC]) . . . . . . . . . . . . . . . . . . . . . . . . . 26  
5 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09  
6 Disc tray open/close button (<, OPEN/CLOSE) . . . . . . . . 22  
7 Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
8 Pause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
9 Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
: Time slip button and roller (TIME SLIP) . . . . . . . . . . . . . . . 29  
; L2 input terminals (L2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
< Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
= Top window button (TOP WINDOW) . . . . . . . . . . . . . . . . . . 30  
> Cursor buttons (3, 4, 2, 1) . . . . . . . . . . . . . . . . . . . . . . . 19  
? Enter button (ENTER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
@ Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
A Slow/search buttons (6, 5) . . . . . . . . . . . . . . . . . . . . . 24  
B Skip buttons (:, 9) . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
C TV channel buttons ([TV], W, X, CH) . . . . . . . . . . . . . . . . . . 13  
D TV power on/off button ([TV], POWER ê) . . . . . . . . . . . . . . 13  
E Television input mode selector ([TV], TV/AV) . . . . . . . . . . . 13  
F Top menu and Direct Navigator button  
(TOP MENU, DIRECT NAVIGATOR) . . . . . . . . . . . . . . . 23, 56  
G Joystick (3, 4, 2, 1)/Enter button (ENTER) . . . . . . . . . . 16  
H Manual programming and check button  
(PROG/CHECK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
I VCR Plusr button (VCR Plusr) . . . . . . . . . . . . . . . . . . . . . 43  
J Time slip button (TIME SLIP) . . . . . . . . . . . . . . . . . . . . . . . . 29  
K One-minute skip button (CM SKIP) . . . . . . . . . . . . . . . . . . . 32  
L Manual channel adding and deleting button  
(ADD/DLT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
M DVD/TV switch (DVD, TV) . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
³When selecting numbered items on this unit, be sure  
!?  
to switch [DVD, TV] to “DVD”.  
³When selecting channels on the television, be sure to  
switch [DVD, TV] to “TV”.  
N Virtual Surround Sound button (V.S.S.) . . . . . . . . . . . . . . . 39  
O TV volume buttons ([TV], r, s, VOL) . . . . . . . . . . . . . . . . . 13  
P Display button (DISPLAY) . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Q Menu and Play List button (MENU, PLAY LIST) . . . . . 23, 65  
R On-screen display button (STATUS) . . . . . . . . . . . . . . . . . . 94  
S Frame advance and frame reverse buttons  
(2;, ;1, FRAME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
T Numbered buttons (1–0, 100) . . . . . . . . . . . . . . . . . . . . . . . 23  
³When selecting a title, chapter, track, program, or play list  
Example: “5”: [0] ➡ [5]  
º Opening the front panel  
Open the front panel to access other controls and input ter-  
minals.  
Example: “15”: [1] ➡ [5]  
³When selecting a page of play list scene  
Example: “5”: [0] ➡ [0] ➡ [5]  
Example: “15”: [0] ➡ [1] ➡ [5]  
³When selecting a television channel  
Example: “5”: [0] ➡ [5]  
Example: “15”: [1] ➡ [5]  
Example: “115”: [100] ➡ [1] ➡ [5]  
U Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
V Last marker button (LAST MARKER) . . . . . . . . . . . . . . . . . 23  
W Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
X Marker write button (MARKER WRITE) . . . . . . . . . . . . . . . 36  
Y Action button (ACTION) . . . . . . . . . . . . . . . . . . . . . . . . . 19, 85  
Z Input select button (INPUT SELECT) . . . . . . . . . . . . . . . . . 49  
8
RQT6035  
The unit’s display  
Center circle (e.g.: DVD-RAM)  
Rotating (REC): recording  
Stopped (REC): recording paused  
Rotating (REC, PLAY):  
Chasing play or  
Rotating (PLAY): playing  
Stopped (PLAY): play paused  
“PLAY” flashes: the resume  
function is  
simultaneous rec and  
play is in progress  
working  
Gingsarted  
1
2
3 4 5 6 7  
8
9
:
;
<
1 Disc type  
9 The display mode of the main display section  
TITLE: title number is displayed  
DVD-RAM: DVD-RAM  
DVD-R: DVD-R  
TRACK: track number is displayed  
DVD VIDEO: DVD-Video  
CHAP: chapter number is displayed  
VIDEO CD: Video CD  
PG:  
PL:  
program number is displayed  
play list number is displayed  
CD:  
Audio CD  
2 Play mode  
PGM:  
: Volume level meter  
; Channel  
< Main display section  
Recording and play counter  
Timer recording on and off times  
Remaining disc time  
program play  
random play  
RND:  
A-B 1: A-B repeat play  
1: repeat play  
PGM 1: program repeat play  
3 Multi-angle (➡ page 41)  
Current time  
4 Audio signal type  
MLT.CH: a signal with 3 or more channels  
5 DVD indicator  
Title, track, chapter, program and play list numbers, and other  
miscellaneous messages  
Flashes: when you press [ê/I, POWER] to turn the unit off until  
it actually turns off  
6 Timer recording display  
On:  
when timer recording is on standby (➡ page 44, 47)  
Flashes: when the unit couldn’t go to timer recording standby  
(e.g., a disc isn’t loaded or a disc that can’t be record-  
ed to is loaded ➡ page 48)  
7 Recording mode (➡ pages 26, 44)  
XP:  
SP:  
LP:  
EP:  
High-quality mode  
Normal mode  
Long play mode  
Extra long play mode  
XP SP LP EP (all on): FR (flexible recording) mode (only with  
timer recording)  
8 Timer indicator  
ON:  
OFF:  
the timer recording start time  
the timer recording end time or One Touch Recording  
end time  
9
RQT6035  
Set up steps  
Follow these steps to connect and set-up this unit  
Prepare the remote control  
º Insert the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
º Change the remote control code for television  
operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
1
Gnigsarted  
Antenna and television  
connections  
º Basic connection . . . . . . . 14  
º When you need to rework  
your antenna cable. . . . . . 80  
2
3
Tune into television stations  
º Plug-in Auto Tuning . . . . . . . . . . . . . . . . . . . . . . . . . .16  
º VCR Plusr guide channel settings . . . . . . . . . . . . . .19  
º Change the settings to suit your television . . . . . . . .21  
10  
RQT6035  
Ways to use this unit  
Playing discs  
Recording programs  
º Playing discs (➡ page 22)  
º Using the direct navigator (➡ page 56)  
º Recording television programs  
(➡ page 26)  
Recording and Playing  
at the same time  
º Chasing play (➡ page 28)  
º Simultaneous rec and play  
(➡ page 28)  
Editing recordings  
º Using play lists to edit programs  
(➡ page 65)  
Gingsarted  
º Reviewing the recorded images while  
recording (Time Slip) (➡ page 29)  
Using DVD-R  
Timer recording  
º DVD-R (➡ page 7)  
º Recording television programs  
(➡ page 26)  
º Using VCR Plusr codes (➡ page 43)  
º Manual programming (➡ page 46)  
º Playing discs (➡ page 22)  
º Using the direct navigator (➡ page 56)  
Recording from a video  
cassette recorder  
º Recording from a video cassette  
recorder (➡ page 49)  
Watching CATV broadcasts  
º Connecting a cable TV box  
(➡ page 76)  
º Connecting a video cassette recorder  
(➡ page 79)  
Changing the unit’s settings  
Adjusting the picture  
º Using on-screen menu icons  
(➡ page 40)  
º Using on-screen menu icons  
(➡ page 40)  
º Changing the unit’s settings  
(➡ page 82)  
Enjoying even better pictures  
Enjoying surround sound  
º Connecting to a TV with S-video or  
component video input terminals  
(➡ page 15)  
º Selecting TV screen type  
(➡ page 21)  
º Enjoying virtual surround sound ef-  
fects (V.S.S.) (➡ page 39)  
º Connecting an amplifier or system  
component with built-in decoder  
(➡ page 78)  
º Digital output (➡ page 86)  
11  
RQT6035  
The remote control  
A
!?  
A
»
Batteries  
³Insert so the poles (i and j) match those in the remote control.  
³Do not use rechargeable type batteries.  
R6, AA  
1
Do not:  
³mix old and new batteries.  
³use different types at the same time.  
³heat or expose to flame.  
2
³take apart or short circuit.  
³attempt to recharge alkaline or manganese batteries.  
³use batteries if the covering has been peeled off.  
Mishandling of batteries can cause electrolyte leakage which can  
damage items the fluid contacts and may cause a fire.  
If electrolyte leaks from the batteries, consult your dealer.  
Wash thoroughly with water if electrolyte comes in contact with any  
part of your body.  
Push in and down on the (j) end.  
Gnigsarted  
Remove if the remote control is not going to be used for a long peri-  
od of time. Store in a cool, dark place.  
Replace if the unit does not respond to the remote control even  
when held close to the front panel.  
B
Remote control signal sensor  
Note  
After changing the batteries, the codes you entered (television  
➡ page 13 and remote control ➡ page 81) are cleared. Reenter the  
codes as necessary.  
30  
7 m (23 feet) directly  
in front of the unit  
!?  
30  
B
»
Use  
Aim at the sensor, avoiding obstacles, at a maximum range of  
7 m (23 feet) directly in front of the unit.  
DVD  
TV  
³Keep the transmission window and the unit’s sensor free from  
dust.  
³Operation can be affected by strong light sources, such as direct  
sunlight, and the glass doors on cabinets.  
!?  
Switch [DVD, TV] to “DVD”.  
Do not:  
³put heavy objects on the remote control.  
³take the remote control apart.  
³spill liquids onto the remote control.  
12  
RQT6035  
The remote control  
TV ,  
,
,
,CH  
TV  
CH  
VOL  
POWER  
TV/AV  
TV ,  
,VOL  
!?  
2
Television operation  
OPEN/CLOSE  
POWER  
TV , TV/AV  
P
You can control televisions by entering the remote control code.  
L
Preparation  
³Turn on the television.  
³Switch [DVD, TV] to “TV”.  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
1 Refer to the chart below for the code  
for your television.  
STOP  
PAUSE  
PLAY  
2 Press and hold [[TV], POWER ê] and  
1
4
2
5
8
0
3
6
2
enter the two-digit code with the num-  
7
9
VCR Plus+  
bered buttons.  
100  
³For example: 01, press [0] ➡ [1].  
DVD  
CH  
Gingsarted  
REC REC MODE CANCEL  
INPUT  
³Point the remote control at the television.  
³After entering the code, test the remote control by turning  
on the television and changing channels.  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DVD, TV  
Note  
³If there is more than one code, repeat the procedure until you find  
the code that allows correct operation.  
³If your television brand is not listed or if the code listed for your  
television does not allow control of your television, this remote  
control is not compatible with your television.  
³This remote control works with most recently manufactured televi-  
sions, but may not be able to control all the functions on older mod-  
els. Use the remote control supplied with your television if this is  
the case.  
2
1
4
7
2
5
8
0
3
6
9
POWER  
Code No.  
01  
Manufacturer  
Panasonic/National QUASAR  
Panasonic/National QUASAR  
MAGNAVOX SYLVANIA PHILIPS (RC-5)  
ZENITH  
02  
03  
A
04  
05  
THOMSON RCA GE  
SHARP  
TV  
CH  
06  
VOL  
POWER  
TV/AV  
07  
SHARP  
08  
SONY  
09  
TOSHIBA  
10  
SANYO FISHER  
JVC  
11  
1
4
7
2
5
8
0
3
6
12  
HITACHI  
13  
MITSUBISHI  
9
14  
SAMSUNG  
100  
15  
GOLDSTAR/LG  
GOLDSTAR/LG  
GOLDSTAR/LG  
SAMSUNG  
16  
17  
18  
º Operation [A]  
Operation  
On and off  
Button  
[[TV], POWER ê]  
[[TV], TV/AV]  
Video input mode  
Channels  
[[TV], ", !, CH]  
Numbered buttons (➡ page 8)  
Volume  
[[TV], i, j, VOL]  
13  
RQT6035  
Antenna and television connections  
Preparation  
³Refer to the television’s operating instructions.  
³Turn the television off and disconnect its AC power supply cord.  
Audio/Video cable (included)  
Yellow (VIDEO)  
White (L)  
Red (R)  
!?  
Basic connection  
Television  
AUDIO VIDEO  
To the antenna  
Cable TV  
IN  
IN  
VHF/UHF  
RF IN  
Gnigsarted  
Outdoor antenna  
Indoor antenna  
or  
75 - coaxial  
cable (included)  
Audio/Video cable (included)  
Antenna cable  
disconnected from the  
television  
³If the antenna cable you  
disconnected from your  
television is not a coaxial  
cable with a plug, you will  
need to obtain a plug and  
rework the cable  
This unit  
COMPONENT VIDEO OUT  
R
AUDIO  
AUDIO  
AUDIO  
L
L
L
L
VIDEO S-VIDEO  
VIDEO  
Y
P
B
PR  
R
R
R
S-VIDEO  
RF-IN  
(➡ page 80).  
VIDEO S-VIDEO  
AC INT  
(L1)  
VIDEO  
OPTICAL  
AUDIO  
S-VIDEO  
RF-OUT  
(L3)  
VHF/UHF  
DIGITAL AUDIO OUT  
(PCM/BITSTREAM)  
Conserving power  
Cooling fan  
This unit consumes a small amount of power, even when it is turned  
off (approx. 5 W ). To save power when the unit is not to be used for  
a long time, unplug it from the household AC outlet.  
To household AC outlet  
(AC 120 V, 60 Hz)  
!?  
AC power supply cord  
(included)  
º When you have finished connecting the unit  
Change the unit’s settings to suit your television’s aspect ratio  
(➡ “Selecting TV screen type”, page 21). You do not have to change  
this setting if you have a television with a regular 4:3 aspect.  
º Upgrading your system  
To enjoy CATV broadcasts  
See “Expanding your home theater system” on page 75.  
(A contract with a cable TV company is required in most cases to  
view these broadcasts.)  
Connect Your Unit Directly To Your  
To enjoy sound through other audio equipment  
Television.  
You can output digital signals from this unit’s DIGITAL AUDIO OUT  
terminal, enabling you to enjoy the powerful surround effects found  
on discs recorded with Dolby Digital or DTS. Connect an amplifier  
with built-in decoders. See page 78 for connection examples.  
Do not connect the unit through your video cassette recorder  
when setting up your home entertainment system, because  
the picture may not be played correctly due to the copy guard.  
14  
RQT6035  
Connecting to a TV with S-video or component video input terminals  
S VIDEO IN  
COMPONENT VIDEO  
Y
PB  
PR  
Gingsarted  
S-video cable  
(not included)  
Video cable  
(not included)  
COMPONENT VIDEO OUT  
R
R
R
R
AUDIO  
AUDIO  
AUDIO  
L
L
L
L
VIDEO S-VIDEO  
VIDEO  
Y
P
B
PR  
S-VIDEO  
RF-IN  
VIDEO S-VIDEO  
AC IN  
T
(L1)  
VIDEO  
OPTICAL  
AUDIO  
S-VIDEO  
RF-OUT  
(L3)  
VHF/UHF  
DIGITAL AUDIO OUT  
(PCM/BITSTREAM)  
Connect the audio cables as well (➡ pages 14 and 78).  
S VIDEO OUT terminal  
COMPONENT VIDEO OUT terminal  
The S-video terminal achieves a more vivid picture than the VIDEO  
OUT terminal by separating the chrominance (C) and luminance (Y)  
signals. (Actual results depend on the television.)  
These terminals can provide a purer picture than the S-VIDEO OUT  
terminal.  
Connection using these terminals outputs the color difference sig-  
nals (PB/PR) and luminance signal (Y) separately in order to achieve  
high fidelity in reproducing colors.  
For your reference  
You do not have to connect anything to the VIDEO OUT terminal if  
you have connected the unit to your television with the  
COMPONENT VIDEO OUT or S VIDEO OUT terminals.  
³The description of the component video input terminals depends  
on the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR).  
Connect to terminals of the same color.  
³After making this connection, change the black level for a better  
picture (➡ page 82, ACTION—Video—Black Level Control).  
15  
RQT6035  
Plug-in Auto Tuning  
TV  
CH  
VOL  
POWER  
TV/AV  
After you purchase the unit, plug it into your household AC outlet,  
and turn it on for the first time, the unit automatically tunes in all the  
channels it can receive and sets the clock.  
OPEN/CLOSE  
POWER  
1
P
Preparation  
³Confirm that the antenna is connected correctly.  
³Turn on the television and select the appropriate video input to suit  
the connections to this unit.  
2·3  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
RETURN  
STATUS  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
1 Press [ê, POWER] to turn the unit on.  
STOP  
PAUSE  
PLAY  
Auto Channel/Clock Setting  
1
4
2
5
8
0
3
6
Connect antenna cable and if you use a  
cable box, tune it to your local PBS CH  
then...  
7
9
VCR Plus+  
100  
DVD  
CH  
Gnigsarted  
REC REC MODE CANCEL  
INPUT  
Please push the ENTER key.  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
ENTER  
RETURN  
ADD/DLT  
MARKER  
WRITE  
ACTION  
2 Press [ENTER].  
Plug-in Auto Tuning starts and the unit puts the stations it can  
receive into channels.  
Auto Channel Setting  
CH  
18  
1
Auto Channel Setting  
Proceeding. . .  
POWER  
RETURN  
The unit then proceeds with Auto Clock Setting unless the  
clock has already been set.  
2·3  
Auto Clock Setting  
ENTER  
Please wait,  
this may take several minutes.  
Proceeding. . .  
A
Auto Channel Setting  
No Channel found.  
RETURN  
The time is displayed when finished.  
Please check antenna cable connection  
then...  
3 Press [ENTER].  
Push the ENTER key again.  
º If the channels couldn’t be tuned [A]  
The illustrated screen appears. Press [ENTER] to start Plug-in Auto  
Tuning again. Press [RETURN] to cancel.  
ENTER  
RETURN  
If the channels still aren’t tuned, use [ADD/DLT] on the remote con-  
trol to tune channels (➡ page 18).  
B
º If the clock couldn’t be set automatically [B]  
The illustrated screen appears. Press [ENTER] to show the “Manual  
Clock Setting” screen. Set the time manually (➡ page 88).  
Auto Clock Setting  
Auto Clock Setting is incomplete.  
º To stop Plug-in Auto Tuning  
Press [RETURN].  
Press ENTER  
to set clock manually.  
ENTER  
RETURN  
16  
RQT6035  
Plug-in Auto Tuning  
Í/I,POWER  
,
,CH  
Note  
³Plug-in Auto Tuning does not work if you turn the unit on by press-  
ing [<, OPEN/CLOSE] or [1, PLAY].  
³After the unit sets the clock automatically, it then adjusts the clock  
everyday.  
³If the unit sets the time incorrectly, use “Time Zone Adjust” to cor-  
rect it (➡ page 89).  
³You can give the stations captions (➡ page 92).  
³If you connect the unit through a cable TV box or DSS receiver  
(➡ page 76), tune to your local PBS station before starting auto  
clock setting. Use manual clock setting (➡ page 88) if this does not  
work.  
ENTER  
³If there is no local PBS channel in your area then Auto Clock Set-  
ting may not work correctly. In this case the time must be set man-  
ually (➡ page 88).  
Gingsarted  
º Channel plan  
The unit automatically determines the type of transmission (airwave  
or cable) and puts them into channels as follows.  
³TV Mode  
Band  
Stations received by  
airwaves  
VHF  
UHF  
2–13  
14–69  
³CATV Mode  
Band  
Stations received by cable  
VHF  
2–13  
95–99  
14–36  
37–65  
CATV LOW BAND  
CATV MID/SUPER BANDS  
CATV HYPER BAND  
ULTRA BAND  
66–94  
100–125  
SPECIAL CATV CHANNEL  
1
º To start Plug-in Auto Tuning again (after moving  
house, for example)  
Main unit only  
While the unit is on and stopped  
1. Press and hold [X, CH] and [W, CH] for about five seconds.  
³The unit turns off.  
2. Press [ê/I, POWER] to turn the unit on.  
The screen shown in step 1 on page 16 appears. Press [ENTER] to  
start Plug-in Auto Tuning.  
³Antenna system, channel caption, and VCR Plusi guide channel  
settings all revert to the default values when you perform the  
above procedure. Timer recording settings are also cleared.  
17  
RQT6035  
Channel settings  
TV  
CH  
VOL  
POWER  
TV/AV  
Using the remote control to  
add and delete channels  
OPEN/CLOSE  
POWER  
P
Remote control only  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
Use this function if:  
STATUS  
TOP WINDOW  
³Channels were not set correctly using automatic tuning.  
³A channel that should have been set wasn’t.  
³A channel’s reception is poor and you want to delete it.  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
Preparation  
Switch [DVD, TV] to “DVD”.  
1
4
2
5
8
0
3
6
1
1 Press the numbered buttons to select  
7
9
VCR Plus+  
100  
a channel.  
DVD  
CH  
Gnigsarted  
REC REC MODE CANCEL  
INPUT  
Example: “5”: [0] ➡ [5]  
DVD,  
,
,CH  
TIME SLIP CM SKIP  
SELECT  
Example: “15”: [1] ➡ [5]  
LAST  
Example: “115”: [100] ➡ [1] ➡ [5]  
³You can also use [[DVD], W, X CH] when you are going to  
delete a channel.  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
2
MARKER  
WRITE  
ACTION  
DVD, TV  
2 Press [ADD/DLT].  
The channel is deleted if it was set or added if it was not set.  
For example  
CHANNEL 12 DELETED  
1
2
1
4
7
2
5
8
0
3
6
9
100  
Repeat steps 1 and 2 as necessary.  
Note  
This function does not work if:  
³A disc is playing.  
³You are recording.  
³Input is from an external unit.  
ADD/DLT  
18  
RQT6035  
Channel settings  
TV  
CH  
VOL  
POWER  
TV/AV  
VCR Plusr guide  
channel settings  
OPEN/CLOSE  
!?  
POWER  
TOP  
P
Set these guide channels so you can use VCR Plusi codes for tim-  
er recording. Before starting the settings, prepare a chart showing  
the channels, the station’s name, and the guide channel.  
For example:  
2·3  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
Channel number  
Station name  
CBS  
Guide channel  
STOP  
PAUSE  
PLAY  
04  
15  
20  
04  
33  
38  
1
4
2
5
8
0
3
6
HBO  
7
9
VCR Plus+  
100  
Nickelodeon  
DVD  
CH  
Gingsarted  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
Write down all the stations  
you can receive  
LAST  
Look up the guide channels for  
the stations in a television guide  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
1 Press [ACTION].  
1
The ACTION screen appears.  
Set Up  
ACTION  
Off Timer  
6 hr  
Remote Control Code  
Clock Settings  
Set Code 1  
Channel Settings  
SELECT  
TAB  
Re-initialize Setting  
1
2
ACTION  
ENTER RETURN  
2 Use the joystick [2, 1] to select the  
Set Up tab.  
3 Use the joystick [3, 4] to select  
“Channel  
Settings”  
and  
press  
ENTER  
[ENTER].  
Set Up  
ACTION  
Off Timer  
6 hr  
Remote Control Code  
Clock Settings  
Set Code 1  
Channel Settings  
SELECT  
TAB  
Re-initialize Setting  
ENTER RETURN  
3
(Continued on next page)  
ENTER  
ENTER  
19  
RQT6035  
Channel settings  
TV  
CH  
VOL  
POWER  
TV/AV  
4 Use the joystick [3, 4] to select “VCR  
OPEN/CLOSE  
POWER  
Plusr CH Setting” and press  
P
[ENTER].  
For example, when the current antenna system is CATV.  
4·5·6  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
Channel Settings  
ACTION  
Antenna System  
Auto Channel Setting  
Channel Caption  
CATV  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
Preset Channel Caption  
SELECT  
Manual Channel Caption  
1
4
2
5
8
0
3
6
VCR Plus+ CH Setting  
ENTER RETURN  
7
9
VCR Plus+  
When you press [ENTER]  
100  
DVD  
CH  
Gnigsarted  
REC REC MODE CANCEL  
INPUT  
Set Up  
A
CANCEL  
ACTION  
VCR Plus+ CH Setting  
TIME SLIP CM SKIP  
SELECT  
Guide Channel CATV Channel  
LAST  
- - -  
125  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
- - -  
1
SELECT  
ENTER  
- - -  
2
3
- - -  
RETURN  
5 1 Use the joystick [3, 4] to select  
the guide channel you want to set  
and use the joystick [1].  
4
5
Set Up  
ACTION  
VCR Plus+ CH Setting  
Guide Channel CATV Channel  
- - -  
4
ENTER  
ENTER  
- - -  
5
6
- - -  
7
SELECT  
ENTER  
- - -  
- - -  
8
RETURN  
³The screen scrolls a page at a time if you hold the joy-  
stick up or down.  
1
2 Use the joystick [3, 4] to select  
the channel corresponding to the  
guide channel and use the joystick  
[2].  
ENTER  
ENTER  
Set Up  
A
VCR Plus+ CH Setting  
Guide Channel CATV Channel  
2
- - -  
4
- - -  
5
6
- - -  
ENTER  
ENTER  
7
SELECT  
ENTER  
- - -  
- - -  
8
RETURN  
Repeat steps 1 and 2 as necessary.  
6 Press [ENTER].  
The screen shown in step 4 reappears.  
6
ENTER  
Note  
You do not need to change the settings if the channel and guide  
channel numbers are the same.  
º To end the setting  
Press [ACTION].  
º If you make a mistake  
While the TV channel or CATV channel is highlighted, press  
[CANCEL]. “---” is displayed. Repeat step 5-2.  
20  
RQT6035  
Selecting TV screen  
type  
!?  
TOP  
TV  
CH  
VOL  
POWER  
TV/AV  
OPEN/CLOSE  
POWER  
The aspect ratio is factory set to 4:3 for a regular television. You do  
not have to change this setting if you have a regular 4:3 aspect tele-  
vision.  
1
P
L
3·4·5  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
Preparation  
RETURN  
TOP WINDOW  
³Turn on the television and select the appropriate video input to suit  
the connections to this unit.  
SKIP  
SLOW/SEARCH  
³Switch [DVD, TV] to “DVD”.  
STOP  
PAUSE  
PLAY  
1 Press [ê, POWER] to turn this unit  
on.  
1
4
2
5
8
0
3
6
2 Press [ACTION] to show the menus.  
7
9
VCR Plus+  
100  
DVD  
Gingsarted  
REC REC MODE CANCEL  
INPUT  
CH  
Set Up  
ACTION  
TIME SLIP CM SKIP  
SELECT  
Off Timer  
6 hr  
LAST  
ADD/DLT  
DVD  
Remote Control Code  
Clock Settings  
V.S.S.  
TV  
AUDIO  
Set Code 1  
MARKER  
MARKER  
WRITE  
ACTION  
Channel Settings  
DVD,TV  
SELECT  
2
TAB  
Re-initialize Setting  
ENTER RETURN  
3 Use the joystick [2, 1] to select the  
TV Screen tab.  
TV Screen  
ACTION  
1
POWER  
TV Aspect  
4:3  
4:3 TV Settings for DVD-Video  
4:3 TV Settings for DVD-RAM  
Pan&Scan  
Letterbox  
SELECT  
TAB  
ENTER RETURN  
4 Use the joystick [3, 4] to select  
2
ACTION  
“TV Aspect” and press [ENTER].  
5 Use the joystick [3, 4] to select the  
TV aspect and press [ENTER].  
ACTION  
TV Aspect  
4:3  
3
16:9  
ENTER  
SELECT  
ENTER RETURN  
³4:3 (factory setting)  
³16:9  
4·5  
º To return to the previous screen  
Press [RETURN].  
ENTER  
ENTER  
º To end the setting  
Press [ACTION].  
For your reference  
Apart from “TV Aspect”, other settings also affect how video ap-  
pears on your television. Check the following if video doesn’t appear  
correctly on your television.  
³“ACTION—TV Screen—4:3 TV Settings for DVD-Video” or “4:3  
TV Settings for DVD-RAM” (➡ page 83).  
³The video setting on the disc. How video appears is often specified  
by the disc itself.  
³The video settings on your television.  
21  
RQT6035  
TOP  
Playing discs  
1
2 3  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
Preparation  
Switch [DVD, TV] to “DVD”.  
1 Press [ê, POWER] to turn the unit on.  
2 Press [<, OPEN/CLOSE] to open the  
;
∫
tray and insert a disc.  
³Insert inside the tray’s guides.  
³Insert one disc only.  
TV  
CH  
VOL  
POWER  
TV/AV  
OPEN/CLOSE  
POWER  
3 Press [1, PLAY].  
1
2
The disc tray closes and play begins.  
(The unit takes some time to read the disc before play starts.)  
P
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
º To stop play [A]  
Press [º, STOP] (When “PLAY” flashes ➡ page 23, Starting play  
from where you stopped it).  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
³The screen saver at right may appear  
when you stop play. Press [º, STOP]  
again and you can use this unit’s tuner to  
watch television.  
This screen is also shown when you are  
playing CDs.  
3
∫, STOP  
;, PAUSE  
1
4
2
5
8
0
3
6
Bcperations  
7
9
VCR Plus+  
100  
DVD  
REC REC MODE CANCEL  
INPUT  
CH  
º To pause play  
Press [;, PAUSE].  
Press again to restart play.  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DVD,TV  
º Auto power-off  
The unit switches to standby after about 6 hours in the stop mode.  
You can turn this feature off or change the time to 2 hours  
(➡ page 82, ACTION—Set Up—Off Timer).  
POWER  
/I  
POWER  
1
2
or  
º With non-cartridge discs  
OPEN/CLOSE  
OPEN/CLOSE  
Insert label-up. (With double-sided discs, load  
so the label for the side you want to play is facing up.)  
!?  
or  
Insert label-up with the arrow  
facing in.  
(With double-sided discs, load  
so the label for the side you  
want to play is facing up.)  
Guide for 8 cm  
Guide for 12 cm  
(5q) disc  
!?  
(3q) disc  
e.g.: DVD-RAM  
PLAY  
STOP  
3
or  
or  
A
22  
RQT6035  
Playing discs  
TV  
CH  
VOL  
POWER  
TV/AV  
When a menu screen appears on the  
television  
A
»
[DVD-V] [VCD]  
OPEN/CLOSE  
POWER  
P
TOP MENU  
Joystick  
MENU  
Operate menus with the following operations. Actual operations de-  
pend on the disc.  
Press the numbered buttons to select an item (➡ page 8), or  
move the joystick [3, 4, 2, 1] to select an item and press  
[ENTER].  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
RETURN  
STATUS  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
³You can return to menus after you start play by  
STOP  
PAUSE  
PLAY  
!?  
pressing [TOP MENU] or [MENU] (DVD-Video),  
TOP  
or [RETURN] (Video CD).  
1
2
Numbered  
buttons  
1
4
2
5
8
0
3
6
Note  
³Discs continue to rotate while menus are displayed. Press  
[º, STOP] when you have finished viewing to preserve the unit’s  
motor and your television screen.  
³Volume may be lower when playing DVD-Video than when playing  
other discs or during television broadcasts.  
If you turn the volume up on the television or amplifier, ensure you  
reduce the volume again before playing other sources or returning  
to the television so that a sudden increase in output does not  
occur.  
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
V.S.S.  
LAST  
MARKER  
AUDIO  
MARKER  
MARKER  
WRITE  
DVD  
TV  
ACTION  
For your reference  
³If “$” appears on the television  
Bcperations  
The operation is prohibited by the unit or disc.  
³If a disc is loaded, the unit will come on and play will start when  
you press [1, PLAY].  
³If you play a disc with video and then replace it with an audio-only  
disc, the video from the previous disc may continue to be shown  
on the television.  
A
1
4
7
2
5
8
0
3
6
9
or  
ENTER  
ENTER  
Starting play from where you  
TOP  
B
»
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
stopped it (Resume Function)  
1
During play  
Press [º, STOP].  
B
The unit remembers the position.  
2 Press [1, PLAY] while “PLAY” is  
1
STOP  
flashing on the display.  
Play starts from where you stopped it.  
º To cancel the resume function  
Press [º, STOP] until “PLAY” goes out.  
(The position is also cleared when you turn the unit off.)  
º To start play from a memorized position after  
turning the unit off  
2
PLAY  
Press [LAST MARKER] during play.  
(The message “Position Memorized” appears on the television.)  
Now when you press [1, PLAY] after switching the unit to standby  
and back on, play starts from the memorized position.  
For your reference  
³If you press [º, STOP] before switching the unit to standby after  
pressing [LAST MARKER] to memorize a position, play will  
resume from the position you pressed [º, STOP] when you press  
[1, PLAY].  
³The position memorized when you press [º, STOP] is cleared  
when you switch the unit to standby or if the unit switches to stand-  
by automatically (➡ page 82, ACTION—Set Up—Off Timer).  
[DVD-R] [DVD-V] [CD] [VCD]  
³The position is memorized when you press [º, STOP] or  
[LAST MARKER] and cleared when you open the disc tray.  
[RAM]  
³The last marker is written to the disc and remains intact until you  
mark a different position.  
You cannot mark positions if the disc is write-protected with DISC  
SETTING (➡ page 52) or with the write-protect tab (➡ page 99).  
Release the protection before marking another position.  
23  
RQT6035  
Playing discs  
A
Fast forward and rewind—SEARCH  
»
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
During play  
Press [6, SLOW/SEARCH] or [5,  
6, 5  
1
SLOW/SEARCH].  
TV  
CH  
VOL  
POWER  
TV/AV  
[6]: backward  
[5]: forward  
OPEN/CLOSE  
POWER  
P
³There are five search speeds. Each press increases the search  
speed.  
³The search speed is maintained when you release the button.  
³Press [1, PLAY] to restart play.  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
,
,
³Audio is output during search with most discs, but only at forward  
speed one with DVD-RAM (except during chasing play and simul-  
taneous rec and play), DVD-R, DVD-Video, and Video CDs. You  
can turn off the audio during search for DVD-RAM, DVD-R,  
DVD-Video, and Video CDs (➡ page 83, ACTION—Audio—Audio  
during Search).  
SKIP  
SLOW/SEARCH  
FRAME  
6, 5,  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
1, PLAY  
1
4
2
5
8
0
3
6
7
9
VCR Plus+  
Bcperations  
100  
B
Slow-motion play  
»
[RAM] [DVD-R] [DVD-V] [VCD]  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
While paused  
ACTION  
Press [6, SLOW/SEARCH] or [5,  
SLOW/SEARCH].  
[6]: backward (does not work with Video CDs)  
[5]: forward  
³There are five slow-motion speeds. Each press increases the  
slow-motion speed.  
³The slow-motion speed is maintained when you release the but-  
ton.  
A
SLOW/SEARCH  
or  
³Press [1, PLAY] to restart play.  
DVD-RAM  
•
•
•
•
C
»
100X  
L R  
Frame-by-frame viewing  
[RAM] [DVD-R] [DVD-V] [VCD]  
Remote control only  
While paused  
Search speed  
Press [2;, FRAME] or [;1, FRAME].  
[2;]: backward (does not work with Video CDs)  
[;1]: forward  
B
C
SLOW/SEARCH  
or  
³Each press shows the next frame.  
³Press [1, PLAY] to restart play.  
FRAME  
24  
RQT6035  
Playing discs  
A
Skipping  
»
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
You can skip to the beginning of tracks (CD and Video CD  
➡ page 97) and chapters (DVD-Video ➡ page 97) and restart play  
from there.  
:, 9  
On DVD-RAM and DVD-R, you can skip to the start of a program or  
to a marker and start play from there.  
TV  
CH  
VOL  
POWER  
TV/AV  
During play or while paused  
OPEN/CLOSE  
POWER  
P
Press [:, SKIP] or [9, SKIP].  
[:]: backward  
[9]: forward  
Each press increases the number of skips.  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
:, 9,  
SKIP  
For your reference  
STOP  
PAUSE  
PLAY  
³After skipping, the unit returns to the previous state, play or pause.  
³Pressing [:] or [9] while the playback control feature on  
Video CDs (➡ page 97) is working may take you to a menu screen.  
³You can also mark positions to skip to (➡ page 36).  
1
4
2
5
8
0
3
6
Numbered  
buttons  
7
9
VCR Plus+  
Bcperations  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
Starting play from a selected  
program, title, chapter, or track  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
B
»
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DVD, TV  
Remote control only  
Preparation  
Switch [DVD, TV] to “DVD”.  
During play or while stopped¤  
Press the numbered buttons to select the  
A
item.  
SKIP  
For example, to enter 5, press [0] and [5].  
To enter 15, press [1] and [5].  
or  
[DVD-V] [CD] [VCD]  
¤This works only when stopped with some discs (the screen saver is  
on the television).  
Play position  
Once Once  
Twice  
Twice  
Chapter/track Chapter/track Chapter/track  
[:]  
[9]  
Marker  
[RAM] [DVD-R]  
Twice  
Play position  
Once Once Twice Three times  
The program before Current program The program after  
[:]  
[9]  
B
1
4
7
2
5
8
0
3
6
9
25  
RQT6035  
Recording television  
programs  
1 4 3 5  
2
∫ ;  
[RAM] [DVD-R]  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Use a disc that the unit can record to (➡ page 6) and that has  
enough space available.  
³Ensure the disc is not write-protected with the write-protect tab  
(➡ page 99).  
³Ensure the disc is not write-protected with DISC SETTING  
(➡ page 52).  
TV  
CH  
VOL  
POWER  
TV/AV  
TV,  
,
, CH  
TV, TV/AV  
OPEN/CLOSE  
POWER  
1 Press [ê, POWER] to turn the unit on.  
1
2
P
2 Press [<, OPEN/CLOSE] to open the  
tray and insert a disc.  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
³Insert one disc only within the tray’s guides.  
³Press [<, OPEN/CLOSE] to close the tray.  
³When using a DVD-RAM for the first time with this unit, for-  
mat it to ensure accurate recording (➡ page 54, “Format”).  
Check the disc carefully to ensure it doesn’t contain pro-  
grams you want to keep.  
STATUS  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
∫, STOP  
;, PAUSE  
3 Press [[DVD], W, X, CH] to select the  
1
4
2
5
8
0
3
6
Numbered  
buttons  
channel.  
7
9
Bcperations  
VCR Plus+  
4 Press [REC MODE] to select the  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
recording mode.  
5
Select “XP”, “SP”, “LP”, or “EP” (➡ see below).  
TIME SLIP CM SKIP  
SELECT  
3
4
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
5 Press [´, REC] to start recording.  
³The program is recorded into the available space on the  
disc.  
MARKER  
WRITE  
ACTION  
DVD, TV  
POWER  
/I  
º To pause recording  
Press [;, PAUSE].  
Press again to restart recording.  
POWER  
1
2
or  
º To stop recording  
Press [º, STOP].  
OPEN/CLOSE  
OPEN/CLOSE  
º To select channels with the numbered buttons  
When “TV” is the antenna system: between 2 and 69  
When “CATV” is the antenna system: between 1 and 125  
Press the numbered buttons.  
or  
For example: Channel 5, press 0 ➡ 5  
Channel 15, press 1 ➡ 5  
Channel 115, press 100 ➡ 1 ➡ 5  
º Convenient features  
³Chasing play—playing from the beginning of the program you are  
recording (➡ page 28)  
³Simultaneous rec and play—watching a program you recorded  
while recording another (➡ page 28)  
Insert label-up with the arrow  
facing in. (With double-sided  
discs, load so the label for  
the side you want to record  
is facing up.)  
!?  
³Time Slip—checking the images you are recording (➡ page 29).  
º Recording modes  
For example, approximate recording times with a 4.7-GB  
DVD-RAM  
XP: 1 hour, high picture quality  
SP: 2 hours, standard picture quality  
LP: 4 hours, long play  
e.g.: When you have selected  
channel 4  
3
DVD  
CH  
CH  
or  
EP: 6 hours, extra long play  
º Watching the television while recording  
1 Switch [DVD, TV] to “TV”.  
2 Press [[TV], TV/AV] to change the input mode to “TV”.  
3 Press [[TV], W, X, CH] to change channels.  
You can also select the channel with the numbered buttons  
(➡ page 8).  
e.g.: When you have selected “XP”  
REC MODE  
REC MODE  
4
5
or  
For your reference  
³You can also do this during timer recording.  
³The recording is unaffected.  
REC  
REC  
or  
26  
RQT6035  
Recording television programs  
¥, REC  
∫
º Re-inserting double-sided discs  
Reverse  
3
2
1
Front  
TV  
CH  
VOL  
POWER  
TV/AV  
Turn over  
You can get up to 12 hours  
recording when you use  
double-sided discs and use  
the “EP” mode.  
OPEN/CLOSE  
POWER  
P
ENTER  
FRAME  
PROG / CHECK  
RETURN  
º To check the remaining time and the current  
mode during recording [A]  
Press [STATUS] several times.  
STATUS  
TOP WINDOW  
STATUS  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
For your reference  
∫, STOP  
³You can record up to 99 programs on one disc.  
³You cannot change the channel or recording mode during record-  
ing. You can change them while recording is paused, but the mate-  
rial is recorded as a separate program.  
³An error message appears if you try to start recording when a disc  
is full; the remaining time will be shown as “0:00”. To continue re-  
cording, erase unneeded programs (DVD-RAM only ➡ page 58,  
Erasing programs) or use another disc.  
³There are limitations when recording to DVD-R (➡ page 7).  
³The message “Could not write to disc.” is displayed when record-  
ing was not completed correctly. Check the discs for dirt or  
scratches.  
1
4
2
5
8
0
3
6
7
9
Bcperations  
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
¥, REC  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
STATUS  
A
B
Available recording time  
Recording mode  
One Touch Recording—  
Specify a time to stop recording  
B
»
Remain  
0 :30 SP  
DVD-RAM  
REC  
6/8 10 : 15 PM  
PRG4 0:30.00 SP  
[RAM] [DVD-R]  
CH 2  
L R  
This is a simple way of timer recording when you are in a hurry or  
before you go to bed. You can set the time up to 4 hours in advance.  
REC  
REC  
While recording  
or  
Press [´, REC] to select the recording  
time.  
The time increases as illustrated each time you press the button.  
After selecting the time the display updates indicating the time re-  
maining until the unit stops recording. You can change the time  
again with the same operation.  
Counter  
When the time you set is reached, recording stops and the unit  
switches to standby.  
The time remaining until recording finishes changes each  
time you press the button.  
º To cancel  
During recording, press [´, REC] until the counter appears.  
³Recording continues.  
º To show the time remaining until recording fin-  
ishes [C]  
Press [STATUS].  
For your reference  
³This does not work during timer recordings.  
³Recording stops and the set time is cleared if you press  
[º, STOP].  
³The set time is cleared if you pause recording and cause another  
program to be recorded (for example, change the recording mode  
or channel).  
C
DVD-RAM  
REC 0:30  
CH 10  
STATUS  
Shows recording  
will stop in  
30 minutes  
Stereo  
27  
RQT6035  
Playing while you are  
recording  
TV  
CH  
VOL  
POWER  
TV/AV  
OPEN/CLOSE  
POWER  
POWER  
Í
P
Playing from the beginning of the  
program you are recording—  
Chasing play  
1
2
A
»
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
[RAM]  
SKIP  
SLOW/SEARCH  
You can start play from the beginning of a program while continuing  
to record it.  
STOP  
PAUSE  
PLAY  
∫, STOP  
1, PLAY  
Preparation  
Switch [DVD, TV] to “DVD”.  
1
4
2
5
8
0
3
6
7
9
During recording or timer recording  
VCR Plus+  
100  
Press [1, PLAY].  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
Play starts from the beginning of the program being recorded.  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
º To stop play and recording  
1 Press [º, STOP]. Play stops.  
DVD, TV  
Wait 2 seconds.  
2 Press [º, STOP]. Recording stops.  
³You cannot stop recording with [º, STOP] during timer recording.  
To stop timer recording, press [ê, POWER], then [º, STOP] with-  
in 5 seconds.  
PLAY  
A
For example:  
while recording program 2 (sport)  
For your reference  
You are recording a sports  
program (2) and you want to  
watch it from the beginning.  
³The playback images are displayed during chasing play.  
³Sound is not output while fast-forwarding.  
³Play cannot be started until at least 2 seconds after recording  
starts.  
³If you fast-forward and get to within a few seconds of the part being  
recorded, the picture will change to show the images currently be-  
ing played.  
Do the above operation and…  
Acvdperations  
B
»
[RAM]  
Simultaneous rec and play  
The same sports program is  
recorded while you are  
watching it.  
You can start play of the program you are recording or play a pro-  
gram previously recorded.  
Preparation  
Switch [DVD, TV] to “DVD”.  
During recording or timer recording  
B
1
1 Press [TOP MENU, DIRECT NAVI-  
GATOR].  
“´” is displayed in the direct navigator to indicate the pro-  
gram is being recorded (➡ page 57).  
2 Use the joystick [3, 4] to select a  
For example:  
while recording program 2 (sport)  
program and press [ENTER].  
2
ENTER  
ENTER  
DIRECT NAVIGATOR  
º To stop play and recording  
1 Press [º, STOP]. Play stops.  
No  
1
2
CH  
4
6
DATE  
TIME  
TITLE  
EDIT  
1
3
10：00 AM Dinosaur  
9：00 PM  
6/20 WED  
6/20 WED  
Wait 2 seconds.  
¥
1
Soccer  
You want to watch the movie  
you recorded yesterday  
(program 1)  
1
2 Press [º, STOP]. Recording stops.  
³You cannot stop recording with [º, STOP] during timer recording.  
To stop timer recording, press [ê, POWER], then [º, STOP] with-  
in 5 seconds.  
1
1
3
SELECT  
ENTER  
TOTAL 2  
No  
0
~
9
RETURN  
Do the above operation and…  
For your reference  
³During simultaneous rec and play, you cannot edit with the direct  
navigator or use play lists.  
³If you start play while the unit is on timer recording standby, re-  
cording starts when the time you set is reached.  
³The unit returns to recording standby when you stop play while it is  
on timer recording standby.  
DIRECT NAVIGATOR  
No CH  
DATE  
TIME  
TITLE  
EDIT  
1
1
1
1
1
A sports program is  
recorded while you watch a  
movie.  
3
1
2
4
6
10：00 AM Dinosaur  
9：00 PM  
6/20 WED  
6/20 WED  
¥
Soccer  
3
SELECT  
TOTAL 2  
No  
0
~
9
ENTER  
RETURN  
28  
RQT6035  
Playing while you are recording  
∫
Í/I,POWER  
TIME SLIP  
Reviewing the recorded images  
while recording (Time Slip)  
[RAM]  
You can play the program being recorded to check that it is being  
recorded correctly. You can also check parts that were recorded  
previously.  
TV  
CH  
VOL  
POWER  
TV/AV  
Preparation  
OPEN/CLOSE  
POWER  
Switch [DVD, TV] to “DVD”.  
POWER  
Í
P
While recording or timer recording  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
Press [TIME SLIP].  
Play starts from 30 seconds previous.  
TOP WINDOW  
The play images are shown for 5 seconds as a picture-in-picture  
with the recording images, then they are shown in full.  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
º To continue to show both the recording and play  
∫, STOP  
images  
1
4
2
5
8
0
3
6
Press and hold [TIME SLIP] for about 3 seconds.  
7
9
VCR Plus+  
100  
DVD  
CH  
º To change the part being played [A]  
Main unit only  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
1 Turn [TIME SLIP] on the main unit.  
³Turn down to increase in one-minute units.  
³Turn up to decrease in one-minute units.  
2 Press [TIME SLIP] on the main unit within 5 seconds to enter the  
time.  
TIME SLIP  
DVD, TV  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
Play starts from the time you entered.  
Avcdperations  
Note  
You cannot change the position being played with the remote  
control.  
º To stop play and recording  
1 Press [º, STOP]. Play stops.  
TIME SLIP  
Wait 2 seconds.  
TIME SLIP  
2 Press [º, STOP]. Recording stops.  
³You cannot stop recording with [º, STOP] during timer recording.  
To stop timer recording, press [ê, POWER], then [º, STOP] with-  
in 5 seconds.  
or  
For your reference  
³If you fast-forward, rewind, or skip during Time Slip, only the play  
images are shown.  
Current recording  
³The sound for the images being played is heard during Time Slip.  
³The length of the recording determines the amount of time you can  
select for time slip. As the recording progresses, the amount of  
time you can time slip also increases.  
Play images  
(30 seconds  
before)  
A
1
2
29  
RQT6035  
Using the top window  
TV  
CH  
VOL  
POWER  
TV/AV  
About the top window  
OPEN/CLOSE  
POWER  
P
Most of the features and functions of this unit can also be controlled  
with icons. The examples show the top window when a DVD-RAM is  
being used. Actual menus depend on the type of disc being used.  
L
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
2·3  
Cartridge protection  
“ON” is displayed if the disc is protected  
with the write-protect tab (➡ page 99).  
Disc protection  
TOP WINDOW  
RETURN  
1
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
“ON” is displayed if you have used Disc Protection  
in DISC SETTING to protect the disc (➡ page 52).  
1
4
2
5
8
0
3
6
Disc title  
The disc’s title is displayed if one is recorded. You  
can enter titles with Enter Title in DISC SETTING  
7
9
VCR Plus+  
100  
(➡ page 50).  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
Disc type  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
DVD-RAM  
DISC PROTECTION OFF  
CARTRIDGE PROTECT OFF  
MY SELECTION  
MARKER  
WRITE  
TOP  
ACTION  
WINDOW  
DVD, TV  
N
S
N
S
DISC SETTING  
CREATE PLAY LIST  
PLAY LIST  
DIRECT NAVIGATOR  
Date  
CH  
Time  
TIMER RECORDING  
ACTION  
RESUME PLAY  
PLAY  
1
2
TOP WINDOW  
SELECT  
ENTER  
RETURN  
Acvdperations  
Using the top window  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
ENTER  
Preparation  
Switch [DVD, TV] to “DVD”.  
1
While stopped  
Press [TOP WINDOW] to show the top  
window.  
3
DVD-RAM  
DISC PROTECTION OFF  
CARTRIDGE PROTECT OFF  
MY SELECTION  
TOP  
WINDOW  
N
S
ENTER  
N
S
DISC SETTING  
DIRECT NAVIGATOR CREATE PLAY LIST  
Date  
CH  
Time  
TIMER RECORDING  
ACTION  
PLAY LIST  
RESUME PLAY  
PLAY  
SELECT  
ENTER  
RETURN  
2 Use the joystick [3, 4, 2, 1] to se-  
lect an item.  
Refer to the relevant pages for details.  
3 Press [ENTER].  
Your selection is entered and the top window disappears. If  
the operation requires further selections, another screen  
appears.  
º To clear the top window  
Press [TOP WINDOW] or [RETURN].  
30  
RQT6035  
Top window icons  
Features and functions described on other pages that can be controlled with the top window are indicated with  
.
TOP  
Icon  
Items  
Discs  
Pages  
DISC SETTING  
Enter Title  
[RAM] [DVD-R]  
[RAM]  
50  
52, 53  
54  
Disc Protection  
Format  
[RAM]  
DISC SETTING  
Finalize  
[RAM] [DVD-R]  
[RAM] [DVD-R]  
55  
TIMER  
Registering programs and  
making corrections  
46  
RECORDING  
Date  
CH  
Time  
Deleting a timer recording  
program  
[RAM] [DVD-R]  
[RAM] [DVD-R]  
47  
TIMER RECORDING  
Checking the timer programming  
Settings for the unit and discs  
48  
85  
ACTION  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
Settings depend on the type of disc  
ACTION  
DIRECT NAVIGATOR  
Play  
[RAM] [DVD-R]  
[RAM] [DVD-R]  
[RAM] [DVD-R]  
[RAM] [DVD-R]  
[RAM]  
56  
58  
N
S
Erase Program  
Enter Title  
Properties  
59  
DIRECT NAVIGATOR  
62  
Protection  
60, 61  
63  
Shorten Segment  
[RAM]  
PLAY  
Start play from the beginning of  
the disc  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
22  
PLAY  
Avcdperations  
RESUME PLAY  
Start play from the point you  
stopped play  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
23  
66  
RESUME PLAY  
CREATE PLAY  
LIST  
Creating play lists  
[RAM]  
CREATE PLAY LIST  
PLAY LIST  
PLAY LIST  
Playing play lists  
Play Scenes  
[RAM]  
67  
68  
68  
72  
72  
73  
74  
23  
[RAM]  
Edit Scenes  
[RAM]  
Copy Play List  
Erase Play List  
Enter Title  
[RAM]  
[RAM]  
[RAM]  
Properties  
[RAM]  
TOP MENU  
MENU  
Example  
Display a disc’s menus  
[RAM] [DVD-R] [DVD-V]  
MENU  
PROGRAM  
PLAY  
Display the program play screen  
Display the random play screen  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
38  
39  
5
∫ 1  
6
PROGRAM PLAY  
RANDOM PLAY  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
5
∫ 1  
6
RANDOM PLAY  
Some items will be greyed out and cannot be selected if the disc is write-protected. Release disc protection with DISC SETTING—Disc Protec-  
tion (➡ page 53) or release cartridge protection with the write-protect tab (➡ page 99).  
31  
RQT6035  
Convenient features  
1·2  
Skipping a minute forward—  
CM skip  
A
»
[RAM] [DVD-R]  
Remote control only  
Use this feature to skip past short parts of recordings, commercials,  
for example.  
TV  
CH  
VOL  
POWER  
TV/AV  
Preparation  
Switch [DVD, TV] to “DVD”.  
OPEN/CLOSE  
POWER  
During play  
P
L
Press [CM SKIP].  
Play restarts from approximately a minute later.  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
Note  
³If the start of the next program is within one minute of the point you  
skipped from, play restarts from that program.  
³Since the length of each commercial will vary, this feature may not  
always skip each commercial accurately. It is designed as an easy  
way of skipping short periods of time.  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
1
4
2
5
8
0
3
6
7
9
VCR Plus+  
Selecting an amount of time to  
100  
B
»
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
skip—Time Slip  
[RAM] [DVD-R]  
TIME SLIP CM SKIP  
SELECT  
CM SKIP  
DVD, TV  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
Main unit only  
Acvdperations  
You can set an amount of time and then skip with one press of a  
button.  
1
During play  
Turn [TIME SLIP] on the main unit.  
³Turn down to increase in one-minute units.  
³Turn up to decrease in one-minute units.  
A
CM SKIP  
2
Within 5 seconds  
Press [TIME SLIP] on the main unit to  
enter the time.  
Play skips the time you entered.  
B
1
Note  
+3 min  
You cannot use this feature while a direct navigator is being dis-  
played (➡ page 56) or play list is played (➡ page 65).  
For example, when  
you want to skip  
forward 3 minutes  
2
32  
RQT6035  
Convenient features  
TV  
CH  
VOL  
POWER  
TV/AV  
A
Repeat play  
»
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
OPEN/CLOSE  
POWER  
P
DISPLAY  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Press [DISPLAY] ➡ [DISPLAY] to display the on-screen menu  
icons and use the joystick [1] to highlight the repeat play icon  
(➡ pages 40 and 42).  
Joystick/  
ENTER  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
During play  
Use the joystick [3, 4].  
Each time you use the joystick, the display changes as illustrated.  
1
4
2
5
8
0
3
6
Numbered  
buttons  
[RAM] [DVD-R]  
7
9
Program (PRG)()Entire disc (A)()OFF  
^-----------------------------------------------------------------J  
While playing a play list [RAM]  
Play list (PL)()OFF  
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
[DVD-V]  
Chapter (C)()Title (T)()OFF  
^----------------------------------------------J  
MARKER  
WRITE  
ACTION  
DVD, TV  
[CD] [VCD]  
Track (T)()Entire disc (A)()OFF  
^------------------------------------------------------J  
If the Video CD has playback control  
1 While stopped (the screen saver is on  
the television), press the numbered but-  
tons to select a track (➡ page 8).  
A
B
e.g. DVD-Video  
C
2 Do the above operation.  
ENTER  
T
OFF  
Avcdperations  
º To repeat only your favorite tracks  
[CD] [VCD]  
1 Program the tracks you want (➡ page 38).  
2 Do the above operation.  
Note  
³Repeat play may not work as desired with some discs.  
³Repeat play does not work if the disc’s elapsed play time is not  
shown on the unit’s display.  
³You cannot use repeat play to repeat an entire DVD-Video.  
ENTER  
Specify point A Specify point B  
Normal play  
B
A-B repeat play  
»
[RAM] [DVD-R] [DVD-V]  
A
✱
✱ ✱  
A B  
You can repeat a section between points A and B within a program,  
title or chapter.  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Press [DISPLAY] ➡ [DISPLAY] to display the on-screen menu  
icons and use the joystick [1] to highlight the A-B repeat icon  
(➡ pages 40 and 42).  
During play  
Press [ENTER].  
Each time you press the button, the display changes as illustrated.  
A-B repeat starts when you specify point B.  
Note  
³A-B repeat does not work if the DVD’s elapsed play time is not  
shown on the unit’s display.  
³The unit automatically determines the end of a program/title as  
point B when the end of the program/title is reached.  
³Some subtitles recorded around point A or B may fail to appear.  
³This does not work while playing a play list.  
33  
RQT6035  
Convenient features  
TV  
CH  
VOL  
POWER  
TV/AV  
!?  
Changing audio  
OPEN/CLOSE  
POWER  
P
[RAM] [DVD-V] [VCD]  
Remote control only  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
You can change the audio being received or played with the follow-  
ing procedure.  
STATUS  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
Preparation  
Switch [DVD, TV] to “DVD”.  
STOP  
PAUSE  
PLAY  
During reception or play  
Press [AUDIO] to select the audio type.  
1
4
2
5
8
0
3
6
How the type changes depends on when you press the button.  
7
9
º While receiving Multi-channel Television Sound  
Stereo (MTS) [A]  
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
Stereo>SAP>Mono  
^-------------------------}  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
Stereo: To listen to the main audio (stereo)  
³Select “Mono” if reception is poor during a stereo  
broadcast.  
AUDIO  
MARKER  
WRITE  
ACTION  
DVD, TV  
SAP:  
To listen to the secondary audio program.  
Mono: To listen to a broadcast in monaural.  
º While playing a television program recorded on  
DVD-RAM [B]  
If it is a recording of an MTS broadcast  
MAIN()SAP  
If it is a recording of a stereo broadcast  
LR>L>R  
^-------------}  
AUDIO  
º While playing a DVD-Video [C]  
You can change the audio channel number each time you press  
the button. This allows you to change things like the soundtrack  
language.  
Acvdperations  
º While playing a Video CD [D]  
A
B
C
D
LR>L>R  
^-------------}  
No Disc  
CH 13  
e.g.: “Stereo” is selected  
“(((” appears when the unit  
is receiving the type of  
audio you selected.  
(((  
Stereo  
º Audio during television reception  
Audio output  
Audio recorded  
Television  
broadcast  
Setting  
L
R
L
R
DVD-RAM  
PLAY  
Stereo  
rSAP  
Stereo  
SAP  
L
R
L
R
L R  
e.g.: “L R” is selected  
SAP  
LiR  
SAP  
LiR  
LiR  
LiR  
SAP  
LiR  
Mono  
Mono  
rSAP  
Stereo  
Mono  
LiR  
SAP  
L
LiR  
SAP  
R
LiR  
LiR  
L
LiR  
SAP  
R
Digital  
2 FRA 3/2.1 ch  
Digital  
Î
Î
1 ENG 3/2.1 ch  
SAP  
Stereo  
Mono  
Stereo  
SAP  
e.g.: English is the selected  
language  
The language is switched  
to French  
Mono  
LiR  
LiR  
LiR  
LiR  
Stereo  
SAP  
V-CD  
PLAY  
LiR  
LiR  
LiR  
LiR  
Mono  
L R  
e.g.: “L R” is selected  
LlLeft audio channel  
RlRight audio channel  
LiRlLeftiRight audio channel  
34  
RQT6035  
Convenient features  
For your reference  
³You can also use the on-screen menu icons to change the audio  
type.  
³You can change the audio for the images being played with simul-  
taneous rec and play and Time Slip.  
º When you have connected the unit to other  
equipment with an optical digital cable  
You cannot change the audio type when you have used only an op-  
tical digital cable for connection in the following cases:  
³While playing stereo broadcasts recorded on DVD-RAM.  
³While playing MTS broadcasts recorded on DVD-RAM.  
³While playing something recorded from other equipment.  
To change the audio type  
³Set “Dolby Digital” to “PCM” (➡ page 86).  
Or  
³Connect to an amplifier with an audio/video cable and change the  
input on the amplifier to suit the connection.  
When using DVD-R  
You cannot use [AUDIO] or the on-screen menu icons to change  
audio type while playing or recording with DVD-R.  
³While receiving SAP broadcasts  
You can use the ACTION menus to select which audio type is  
recorded, either “Main” or “SAP”. “Main” is the default setting  
(➡ page 83, Audio—MTS Selection for DVD-R Disc).  
³During play  
The audio type selected for recording is played. This is displayed as  
Avcdperations  
“LR”.  
º Audio during television reception  
Audio output  
Audio recorded  
Television  
broadcast  
Setting  
L
L
R
R
L
L
R
R
Stereo  
rSAP  
Main  
SAP  
Main  
SAP  
Main  
SAP  
Main  
SAP  
SAP  
LiR  
SAP  
L
SAP  
LiR  
SAP  
R
SAP  
LiR  
SAP  
L
SAP  
LiR  
SAP  
R
Mono  
rSAP  
Stereo  
Mono  
L
R
L
R
LiR  
LiR  
LiR  
LiR  
LiR  
LiR  
LiR  
LiR  
35  
RQT6035  
Convenient features  
TV  
CH  
VOL  
POWER  
TV/AV  
Marking places to play again—  
OPEN/CLOSE  
POWER  
MARKER  
P
DISPLAY  
L
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
1·2·3  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
Remote control only  
TOP WINDOW  
Preparation  
SKIP  
SLOW/SEARCH  
Switch [DVD, TV] to “DVD”.  
STOP  
PAUSE  
PLAY  
1
4
2
5
8
0
3
6
Marking places  
A
»
[RAM] [DVD-R]  
7
9
VCR Plus+  
100  
You can mark up to 999 points on a disc to return to later. These  
marks are recorded directly onto DVD-RAM and DVD-R and remain  
intact when the disc tray is opened. These marks are cleared when  
you finalized DVD-R.  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
[DVD-V] [CD] [VCD]  
You can mark up to 5 points on a disc to return to later. All the mark-  
ers are cleared when the disc tray is opened.  
DVD, TV  
MARKER  
WRITE  
MARKER  
WRITE  
A
During play  
Press [MARKER WRITE] at the point you  
want to mark.  
B
Marker icon  
To play from a marked position  
B
»
1
1–10  
1 2 3 4 5 ✱✱✱✱✱  
Preparation  
Press [DISPLAY] ➡ [DISPLAY] to display the on-screen menu icons  
and use the joystick [1] to highlight the marker icon (➡ pages 40  
and 42).  
Acvdperations  
ENTER  
1–10  
1 2 3 4 5 ✱✱✱✱✱  
or  
1 Press [ENTER].  
You are now ready to recall markers.  
2 Use the joystick [2, 1] to select a  
1 2 3 4 5  
marker number.  
2
[RAM] [DVD-R]  
1–10  
1 2 3 4 5 ✱✱✱✱✱  
[C] When selecting markers 11 and  
or  
ENTER  
above  
1 Use the joystick [2, 1] to highlight the marker  
pin icon.  
1 2 3 4 5  
2 Use the joystick [3, 4] to select “11–20”.  
You can select the next group of 10 when the cur-  
rent group is full.  
3 Use the joystick [1] and press [ENTER].  
4 Use the joystick [2, 1] to select a marker  
number.  
3
ENTER  
Marker pin icon  
C
3 Press [ENTER].  
1
Play starts from the marked position.  
ENTER  
1–10  
1234567890  
2
ENTER  
11–20  
✱✱✱✱✱✱✱✱✱✱  
3
ENTER  
ENTER  
4
36  
ENTER  
RQT6035  
Convenient features  
TV  
CH  
VOL  
POWER  
TV/AV  
To mark points using the marker icon  
OPEN/CLOSE  
POWER  
P
Preparation  
DISPLAY  
RETURN  
L
Press [DISPLAY] ➡ [DISPLAY] to display the on-screen menu icons  
and use the joystick [1] to highlight the marker icon (➡ pages 40  
and 42).  
1·2·3  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
1 Press [ENTER].  
SKIP  
SLOW/SEARCH  
You are now ready to mark positions.  
STOP  
PAUSE  
PLAY  
2 Use the joystick [2, 1] to select the  
1
4
2
5
8
0
3
6
next asterisk (¢).  
7
9
[RAM] [DVD-R]  
VCR Plus+  
100  
[A] When marking positions 11 and  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
above  
TIME SLIP CM SKIP  
SELECT  
CANCEL  
1 Use the joystick [2, 1] to highlight the marker  
pin icon.  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
2 Use the joystick [3, 4] to select “11–20”.  
You can select the next group of 10 when the cur-  
rent group is full.  
ACTION  
3 Use the joystick [1] and press [ENTER].  
The first marker is selected.  
4 Use the joystick [2, 1] to select an available  
asterisk (¢).  
Marker icon  
1
2
1–10  
1
1
✱✱✱✱✱✱✱✱✱  
3 Press [ENTER] at the point you want  
to mark.  
ENTER  
1–10  
✱✱✱✱✱✱✱✱✱  
Repeat steps 2 and 3 to add other markers.  
or  
Avcdperations  
º To clear a marker  
Use the joystick [2, 1] to select a marker number and press  
[CANCEL].  
1
✱✱✱✱  
º To clear the on-screen icons  
Press [RETURN] several times.  
ENTER  
1–10  
1
✱✱✱✱✱✱✱✱✱  
Note  
³This feature only works if the elapsed playing time of the disc is  
shown on the unit’s display.  
or  
³Some subtitles recorded around the marker may fail to appear.  
1
✱✱✱✱  
[RAM]  
³This feature doesn’t work while using a play list.  
³The markers are ordered by time. This means that the marker  
numbers can change when you add and erase markers.  
³You cannot mark and clear points if you have write-protected the  
disc, either with DISC SETTING (➡ page 52) or with the write-  
protect tab (➡ page 99).  
3
ENTER  
[DVD-R]  
³The markers are ordered by time. This means that the marker  
numbers can change when you add and erase numbers.  
Marker pin icon  
A
1
ENTER  
1–10  
1234567890  
2
ENTER  
11–20  
✱✱✱✱✱✱✱✱✱✱  
3
ENTER  
ENTER  
4
ENTER  
37  
RQT6035  
Convenient features  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Program play  
OPEN/CLOSE  
POWER  
P
[CD] [VCD]  
L
You can select up to 100 tracks to play in the order you choose.  
ENTER  
FRAME  
2
1
PROG / CHECK  
RETURN  
STATUS  
RETURN  
TOP WINDOW  
Preparation  
Switch [DVD, TV] to “DVD”.  
SKIP  
SLOW/SEARCH  
6, 5,  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
1
While stopped  
∫, STOP  
4
3
Press [TOP WINDOW].  
1
4
2
5
8
0
3
6
2 Use the joystick [3, 4, 2, 1] to  
select “PROGRAM PLAY” and press  
[ENTER].  
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
CANCEL  
TIME SLIP CM SKIP  
SELECT  
5
LAST  
6 ∫ 1  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
PROGRAM PLAY  
MARKER  
WRITE  
ACTION  
DVD, TV  
3 Press the numbered buttons to select  
the track.  
Example: “5”: [0] ➡ [5]  
Example: “15”: [1] ➡ [5]  
Choose a track, then press ENTER.  
PROGRAM PLAY  
No.  
1
Track Time  
5
3
02:02  
Play  
5
6 ∫ 1  
2
Clear  
1
2
TOP WINDOW  
All Clear  
SELECT  
3
Acvdperations  
Total Time  
0 Press PLAY to start.  
02:02  
ENTER  
RETURN  
Total time of the program  
ENTER  
ENTER  
Repeat step 3 to select other tracks.  
³You can also use the joystick to select tracks.  
1 Press [ENTER], then use the joystick [3, 4] to select  
the track.  
2 Press [ENTER].  
4 Press [1, PLAY].  
3
4
Play starts in the programmed sequence.  
1
4
7
2
5
8
0
3
6
9
º To move to the page before or after the one  
shown  
Track number  
Press [6, SLOW/SEARCH] or [5, SLOW/SEARCH].  
º To clear the programmed tracks one by one  
1. Use the joystick [3, 4] to select the track you want to clear.  
2. Press [CANCEL].  
Alternatively, use the joystick [3, 4, 2, 1] to select “Clear” and  
press [ENTER].  
Program number  
º To clear the whole program  
Use the joystick [3, 4, 2, 1] to select “All Clear” and press  
[ENTER].  
³The whole program is also cleared when you turn the unit off or  
open the disc tray.  
PLAY  
º To exit the program mode  
1. Press [º, STOP] during play until the program play screen is  
displayed.  
2. Press [TOP WINDOW] or [RETURN].  
38  
RQT6035  
Convenient features  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
A
Random play  
»
[CD] [VCD]  
OPEN/CLOSE  
POWER  
P
L
The unit plays the tracks on a disc in random order.  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
2
TOP WINDOW  
RETURN  
Preparation  
1
Switch [DVD, TV] to “DVD”.  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
1
While stopped  
∫, STOP  
3
Press [TOP WINDOW].  
1
4
2
5
8
0
3
6
2 Use the joystick [3, 4, 2, 1] to  
select “RANDOM PLAY” and press  
[ENTER].  
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
5
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
6 ∫ 1  
V.S.S.  
RANDOM PLAY  
MARKER  
WRITE  
ACTION  
DVD, TV  
TOP WINDOW  
ENTER  
When you press [ENTER]  
RANDOM PLAYBACK  
Press PLAY to start.  
A
RETURN  
1
3 Press [1, PLAY].  
Avcdperations  
º To cancel random play  
1. Press [º, STOP] until the random play screen appears.  
2. Press [TOP WINDOW] or [RETURN].  
2
Enjoying virtual surround  
sound effects (V.S.S.)  
ENTER  
!?  
B
»
[RAM] [DVD-R] [DVD-V]  
(Only with Dolby Digital with 2 or more channels)  
Remote control only  
Enjoy a surround-like effect if you are using two front speakers only.  
The effect is broadened and sound seems to come from virtual  
speakers on either side if the disc has surround signals recorded on  
it.  
3
PLAY  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Turn off the surround effects on the other equipment.  
B
During play  
V.S.S.  
Press [V.S.S.].  
The mode changes as illustrated each time you press the button.  
Natural effect Emphasized effect  
Off  
Note  
³V.S.S. will not work, or will have less effect, with some discs, even  
if you select “1” or “2”.  
³Turn V.S.S. off if it causes distortion.  
1
2
OFF  
39  
RQT6035  
Using on-screen menu icons  
TV  
CH  
VOL  
POWER  
TV/AV  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
OPEN/CLOSE  
POWER  
Remote control only  
P
L
1
On-Screen Menu Icons are menus that contain information about  
the disc or unit. These menus allow you to perform operations by  
changing this information.  
ENTER  
FRAME  
2·3·4  
PROG / CHECK  
RETURN  
STATUS  
RETURN  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
Common procedures  
STOP  
PAUSE  
PLAY  
Preparation  
Switch [DVD, TV] to “DVD”.  
1
4
2
5
8
0
3
6
Numbered  
buttons  
7
9
1 Press [DISPLAY].  
Each time you press the button:  
[>Icons for disc information (a)  
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
l
;
TIME SLIP CM SKIP  
SELECT  
l>Icons for unit information (b)  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
l
;
MARKER  
WRITE  
ACTION  
{=Original display (c)  
DVD, TV  
2
[Icons\for\unit\information\only]  
While the leftmost icon is highlighted  
Use the joystick [3, 4] to select the  
menu.  
Each time you move the joystick:  
[>Play menu (d)  
l
;:  
l>Video menu (e)  
;:  
{>Audio menu (f)  
1
2
P
l
e.g.: DVD-Video  
Acvdperations  
Digital  
ON  
Î
T
C
3 Use the joystick [2, 1] to select the  
a
1
ENG  
1 ENG 3/2.1 ch  
1 : 46 : 50  
2
1
2
item.  
4 Use the joystick [3, 4] to select the  
b
---  
1 2 3 ✱✱  
AB  
OFF  
setting.  
³Press [ENTER] if the setting does not change after moving  
the joystick [3, 4].  
c
³The numbered buttons can also be used (➡ page 8) to  
change some items that use numbers (title and track num-  
bers, for example).  
³Some items require different operations. Read the explana-  
tions on the following pages.  
d
e
f
---  
1 2 3 ✱✱  
AB  
OFF  
ENTER  
N
OFF  
º To clear the icons  
Press [RETURN] until the menus disappear.  
OFF  
OFF  
º To change the position of the icons  
1. Use the joystick [2, 1] to select the rightmost icon.  
2. Use the joystick [3,4] to move the icons.  
There are 5 positions to choose from.  
3
4
ENTER  
For your reference  
³The screens depend on the disc contents.  
³Depending on the condition of the unit (playing, stopped, etc.) and  
disc contents, there are some items that you cannot select or  
change.  
ENTER  
40  
RQT6035  
Icons for disc information  
e.g. DVD-Video  
Digital  
ON  
ENG  
Î
T C  
1
1 ENG 3/2.1 ch  
2
2
1 : 46 : 50  
1
Icon  
Content  
Icon  
Content  
Program number [RAM] [DVD-R]  
Select the number and press  
[ENTER].  
Subtitle number [DVD-V]  
(See [A] below.)  
Change the number to select a  
subtitle language.  
PRG  
2
ON  
1
1
ENG  
Play list number [RAM]  
Select the number and press  
[ENTER].  
PL  
2
Subtitles on/off [RAM] [DVD-V]  
Turn the subtitles on or off.  
ON  
ENG  
!?  
Title number [DVD-V]  
Track number [CD] [VCD]  
Select the number and press  
[ENTER].  
T
Angle number [DVD-V]  
Change the number to select an  
angle.  
2
1
Chapter number [DVD-V]  
Select the number and press  
[ENTER].  
C
Audio channel [RAM] [VCD]  
Select the audio channel  
(➡ page 34).  
2
L R  
Elapsed play time  
[RAM] [DVD-R] [DVD-V]  
Menu play [VCD]  
Press the numbered buttons to  
select a time to play from.  
For example, to start play from  
1 hour, 6 minutes and 37 seconds  
Press [1]–[0]–[6]–[3]–[7], then  
[ENTER].  
(with playback control only)  
Indicates whether menu play  
(playback control) is on or off.  
Cannot be changed here.  
1 : 06 : 37  
P B C  
ON  
Avcdperations  
[A] Soundtrack/Subtitle language  
Time display [CD] [VCD]  
Use the joystick [3, 4] to  
change the information  
displayed.  
ENG: English  
FRA: French  
DEU: German  
ITA: Italian  
ESP: Spanish  
NLD: Dutch  
SVE: Swedish  
NOR: Norwegian  
DAN: Danish  
POR: Portuguese  
RUS: Russian  
JPN: Japanese  
CHI: Chinese  
KOR: Korean  
MAL: Malay  
VIE: Vietnamese  
THA: Thai  
[>Track elapsed time  
l
;:  
l>Track remaining time  
;:  
¢:  
Others  
l
[B] Audio attributes  
LPCM/ëDigital/DTS/MPEG: Signal type  
{>Disc remaining time  
k (kHz):  
b (bit):  
Sampling frequency  
Number of bits  
[A] Soundtrack language  
[DVD-V] (See [A] at right.)  
Change the number to select  
a soundtrack.  
[B]  
ch (channel): Number of channels (➡ page 96)  
Î
Digital  
1 ENG 3/2.1 ch  
For your reference  
³You can only select subtitles, soundtracks, and angles if they are  
recorded on the disc.  
³Some discs allow changes to soundtracks, subtitles, and angles  
only by using the disc’s menus.  
³Soundtrack and subtitle languages can be set before play  
(➡ page 82, ACTION—Disc—Audio and Subtitle).  
³If the subtitles overlap closed captions recorded on discs, turn the  
subtitles off.  
[B] Audio attribute [RAM] [DVD-V]  
[A]  
(See [B] at right.)  
Karaoke vocals, on and off  
(Karaoke [DVD-V] only)  
Solo: ON () OFF  
Vocal  
OFF  
1
✱
Duet: OFF () V1iV2  
:
:
;
;
V2 (---) V1  
41  
RQT6035  
Using on-screen menu icons  
Icons for unit information  
Play menu  
Video menu  
N
–––  
1 2 3 ✱ ✱  
AB  
OFF  
OFF  
Icon  
Content  
Icon  
N
Content  
A-B repeat (➡ page 33)  
[RAM] [DVD-R] [DVD-V]  
Digital picture mode  
[RAM] [DVD-R] [DVD-V] [VCD]  
To select the picture mode during play: [  
N: Normal mode  
AB  
You can repeat a section between points A  
and B within a program, title or chapter.  
3,  
4]  
C: Cinema mode (mellows movie, enhances  
detail in dark scenes.)  
Repeat play (➡ page 33)  
You can play a program, play list, chapter,  
title, or track repeatedly.  
U1/U2: User mode  
To change the user mode  
OFF  
1. Select User mode and move the joystick [  
1].  
Play mode [CD] [VCD]  
Cannot be changed here.  
2. Use the joystick [3, 4] to select U1 or U2.  
3. Use the joystick [2, 1] to select the item  
you want to change.  
---:  
Normal play  
–––  
PGM: program play (➡ page 38)  
RND: random play (➡ page 39)  
4. Use the joystick [3, 4] to change the  
setting.  
[RAM] [DVD-R]  
Marker  
MPEG DNR  
!?  
You can mark points on a disc to return to later  
(➡ page 36).  
[RAM] [DVD-R] [DVD-V] [VCD]  
(Displayed when the picture mode is N or C.)  
You can turn on and off the recommended  
settings for 3D NR, block NR, and mosquito  
NR.  
OFF  
1–10  
1 2  
[DVD-V] [VCD]  
[CD]  
ON()OFF  
Acvdperations  
º U1: Common picture adjustment  
1 2 3 ✱✱  
Icon  
Content  
Contrast (j7 to i7)  
Increases the contrast between light and dark  
parts of the picture.  
0
Audio menu  
Brightness (0 to i15)  
Brightens the picture.  
0
0
OFF  
OFF  
Color (j7 to i7)  
Adjusts the shade of the picture’s color.  
Icon  
Content  
Dialog Enhancer [DVD-V]  
(Dolby Digital, 3-channel or over only,  
including a center channel)  
The volume of the center channel is raised to  
make dialog easier to hear.  
ON()OFF  
Gamma (0 to i5)  
Increases the brightness of the center ranges  
to improve detail and contrast in dark scenes.  
OFF  
0
!?  
º U2: Reducing picture noise  
V.S.S. (➡ page 39) [RAM] [DVD-R] [DVD-V]  
Enjoy a surround-like effect if you are using  
two front speakers only. The effect is  
broadened and sound seems to come from  
virtual speakers on either side if the disc has  
surround signals recorded on it.  
Icon  
Content  
OFF  
3D NR (0 to i4)  
Reduces overall noise.  
+
1
Block NR (0 to i3)  
Smoothes block noise.  
+
1
Mosquito NR (0 to i3)  
Reduces the smudging that appears around  
contrasting sections of the picture.  
+
1
42  
RQT6035  
Timer recording  
TV  
CH  
VOL  
POWER  
TV/AV  
Using VCR Plusr codes to make  
OPEN/CLOSE  
POWER  
timer recording  
P
L
[RAM] [DVD-R]  
Joystick  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
Remote control only  
TOP WINDOW  
Entering VCR Plusi codes is an easy way of programming the  
timer for recording. You can find these codes in television sections  
of newspapers and in television guides. You can enter up to  
16 programs up to a month in advance. Each daily or weekly pro-  
gram is counted as one program.  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
1
4
2
5
8
0
3
6
2
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Ensure that this unit’s clock and guide channels (➡ page 19) are  
set correctly.  
7
9
VCR Plus+  
100  
1
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
³Insert a disc for recording (make sure there is enough room for the  
program you are going to record plus a little extra).  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DVD, TV  
1 Press [VCR Plusr].  
VCR Plus+  
Date  
CH  
Time  
-
-
-
-
-
-
-
-
Enter PLUS CODE Number by using 0-9 key.  
No.  
0 -- 9  
VCR Plus+  
1
2
RETURN  
Avcdperations  
2 Press the numbered buttons to enter  
the VCR Plusr code.  
VCR Plus+  
Date  
CH  
Time  
1
1
1
1
1
1
1
1
1
4
7
2
5
8
0
3
6
9
Enter PLUS CODE Number by using 0-9 key.  
No.  
0 -- 9  
ENTER  
RETURN  
If you enter the wrong digit, use the joystick [2] to move back  
and enter the correct digit.  
(Continued on next page)  
43  
RQT6035  
Timer recording  
TV  
CH  
VOL  
POWER  
TV/AV  
3 Press [ENTER].  
The timer recording setting screen appears which allows you  
to confirm the program and make corrections if necessary.  
OPEN/CLOSE  
POWER  
POWER  
Í
P
L
TIMER  
Remaining Recording Time 0:17 SP  
RECORDING  
3
4
Date  
CH  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
Time  
The current  
CHANNEL DATE  
ON  
OFF MODE  
4
TOP WINDOW  
63 TSN 1/ 1 SAT 12:00 AM 1:00 AM SP  
recording mode  
(shown on the  
unit’s display) is  
automatically  
selected. To  
SKIP  
SLOW/SEARCH  
CANCEL  
SELECT  
STOP  
PAUSE  
PLAY  
change the mode  
➡ page 45  
After 14 seconds or  
ENTER  
1
4
2
5
8
0
3
6
RETURN  
7
9
VCR Plus+  
when you press [ENTER]  
100  
DVD  
REC REC MODE CANCEL  
INPUT  
CH  
TIMER  
The timer  
recording list  
appears.  
Remaining Recording Time 0:17 SP  
RECORDING  
TIME SLIP CM SKIP  
SELECT  
Date  
Time  
CH  
No CHANNEL  
DATE  
ON  
OFF MODE  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
1
2
64 TSN 1/ 1 SAT 12:00 AM 1:00 AM SP  
---- ---------- --:-- -- --:-- -- --  
MARKER  
WRITE  
ACTION  
CANCEL  
SELECT  
ENTER  
RETURN  
Repeat steps 1–3 to program other recordings.  
4 Press [PROG/CHECK] or [RETURN].  
The timer recording list disappears and the message “TURN  
RECORDER OFF FOR TIMER RECORDING” is shown on  
the television.  
3
ENTER  
Acvdperations  
To put the unit on timer recording  
standby  
!?  
A
»
4
Press [ê, POWER].  
Ensure “ç” lights on the unit’s display.  
PROG / CHECK  
RETURN  
or  
Note  
If the disc is protected or full, the unit switches to standby but does  
not go for timer recording standby. Check the disc carefully.  
º Flexible recording mode (FR)  
³The unit automatically selects a recording rate between “XP” and  
“EP” that will enable the recordings to fit in the available recording  
time on the disc with the best possible recording quality.  
³You can use the mode only with timer recording.  
³It may not be possible to record to the finish of the program if the  
remaining time doesn’t allow.  
A
POWER  
Note  
³The built-in clock employs 12-hour system.  
³The actual time recorded may be longer than the program itself  
when television programs are recorded using VCR Plusi.  
³“Invalid Entry” is displayed when you enter the wrong code. Reent-  
er the code.  
³“All timer programs are occupied.” is displayed if there are already  
16 items programmed. Clear unnecessary items (➡ page 47).  
³The remaining time displayed is calculated based on the current  
recording mode.  
³Approximately 30 seconds at the beginning of subsequent pro-  
grams is not recorded when you use timer recording to record mul-  
tiple programs to a DVD-R.  
³Recording is not possible unless you set “Disc Protection” in “DISC  
SETTING” to “Off” (➡ page 53). [RAM]  
³You can not record to a disc if the disc is protected with the write-  
protect tab. Release this before operation (➡ page 99). [RAM]  
³Timer recording may not work as set when summer time switches  
to winter time and vice versa (➡ page 88).  
44  
RQT6035  
Timer recording  
TV  
CH  
VOL  
POWER  
TV/AV  
!?  
To change the timer recording program  
OPEN/CLOSE  
POWER  
P
Timer recording setting screen (from step 3 on page 44)  
L
TIMER  
1·2·3  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
Remaining Recording Time 0:17 SP  
RECORDING  
TOP WINDOW  
Date  
Time  
CH  
CHANNEL DATE  
ON  
OFF MODE  
SKIP  
SLOW/SEARCH  
63 TSN 1/ 1 SAT 12:00 AM 1:00 AM SP  
STOP  
PAUSE  
PLAY  
CANCEL  
SELECT  
1
4
2
5
8
0
3
6
7
9
VCR Plus+  
ENTER  
100  
RETURN  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
1 Use the joystick [2, 1] to select the  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
item you want to change.  
ACTION  
2 Use the joystick [3, 4] to change the  
setting.  
The items change as follows:  
³CHANNEL (Channel number and caption)  
!?  
³DATE  
Current date--->the day before one month later>  
DAILY SUN-SAT>DAILY MON-SAT>DAILY MON-FRI>  
WEEKLY SUN--->WEEKLY SAT  
³ON (Start time)/OFF (Finish time)  
The time increases or decreases in 30-minute increments if  
you hold the button.  
³MODE (Recording mode)  
SP>XP>FR>EP>LP  
(SP, XP, EP and LP ➡ page 26, FR ➡ page 44)  
1
2
3
ENTER  
Avcdperations  
3 Press [ENTER] when you have  
finished making changes.  
The timer recording list appears.  
ENTER  
ENTER  
45  
RQT6035  
Timer recording  
TV  
CH  
VOL  
POWER  
TV/AV  
Manually programming the  
unit to make timer recording  
OPEN/CLOSE  
TOP  
POWER  
P
L
[RAM] [DVD-R]  
2·3·4  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
You can set your own programming conditions (up to 16 programs).  
1
TOP WINDOW  
Preparation  
SKIP  
SLOW/SEARCH  
³Switch [DVD, TV] to “DVD”.  
STOP  
PAUSE  
PLAY  
³Ensure that this unit’s clock is set correctly.  
³Insert a disc for recording (make sure there is enough room for the  
program you are going to record plus a little extra).  
1
4
2
5
8
0
3
6
1 Press [PROG/CHECK].  
7
9
VCR Plus+  
The timer recording list appears.  
100  
DVD  
REC REC MODE CANCEL  
INPUT  
CH  
TIMER  
TIME SLIP CM SKIP  
SELECT  
Remaining Recording Time 0:17 SP  
RECORDING  
Date  
LAST  
Time  
ADD/DLT  
V.S.S.  
No CHANNEL  
DATE  
ON  
OFF MODE  
AUDIO  
CH  
MARKER  
1
2
64 ABC 1/ 1 SAT 12:00 AM 1:00 AM SP  
---- ---------- --:-- -- --:-- -- --  
MARKER  
WRITE  
DVD  
TV  
ACTION  
DVD, TV  
SELECT  
ENTER  
RETURN  
A line that is ready for programming is highlighted.  
1
2 Press [ENTER].  
PROG / CHECK  
The timer recording setting screen appears.  
TIMER  
Remaining Recording Time 0:17 SP  
RECORDING  
Acvdperations  
Date  
CH  
Time  
CHANNEL DATE  
ON  
OFF MODE  
---- ---------- --:-- -- --:-- -- --  
2
3
CANCEL  
SELECT  
ENTER  
ENTER  
RETURN  
3 Use the joystick [1] to move through  
the items and change the items with  
the joystick [3, 4].  
³The current settings are shown each time you press [1].  
ENTER  
TIMER  
Remaining Recording Time 0:17 SP  
RECORDING  
Date  
CH  
Time  
CHANNEL DATE  
ON  
OFF MODE  
63 TSN 1/ 2 SUN 12:00 AM 1:00 AM SP  
ENTER  
³CHANNEL (Channel number and caption)  
!?  
³DATE  
Current date--->the day before one month later>  
DAILY SUN-SAT>DAILY MON-SAT>DAILY MON-FRI>  
WEEKLY SUN--->WEEKLY SAT  
³ON (Start time)/OFF (Finish time)  
The time increases or decreases in 30-minute increments if  
you hold the button.  
4
ENTER  
³MODE (Recording mode)  
SP>XP>FR>EP>LP  
(SP, XP, EP and LP ➡ page 26, FR ➡ page 47)  
4 Press [ENTER] when you have  
finished programming the timer.  
The timer recording list reappears.  
46  
RQT6035  
Timer recording  
TV  
CH  
VOL  
POWER  
TV/AV  
º To continue programming  
After selecting an available line, repeat steps 2, 3, and 4 on page 46.  
º To end programming  
OPEN/CLOSE  
POWER  
POWER  
Í
Press [PROG/CHECK] or [RETURN]. The timer recording list disap-  
pears and the message “TURN RECORDER OFF FOR TIMER  
RECORDING” is shown on the television.  
P
L
ENTER  
FRAME  
1·2  
RETURN  
PROG / CHECK  
RETURN  
STATUS  
PROG/CHECK  
TOP WINDOW  
To put the unit on timer recording  
standby  
!?  
A
»
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
Press [ê, POWER].  
Ensure “ç” lights on the unit’s display.  
Note  
1
4
2
5
8
0
3
6
If the disc is protected or full, the unit switches to standby but does  
not go for timer recording standby. Check the disc carefully.  
7
9
VCR Plus+  
º Flexible recording mode (FR)  
100  
³The unit automatically selects a recording rate between “XP” and  
“EP” that will enable the timer recording to fit in the available re-  
cording time on the disc with the best possible recording quality.  
³You can use the mode only with timer recording.  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
CANCEL  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
³It may not be possible to record to the finish of the program if the  
remaining time doesn’t allow.  
MARKER  
WRITE  
ACTION  
Note  
³The built-in clock employs 12-hour system.  
³The remaining time displayed is calculated based on the current  
recording mode.  
³Approximately 30 seconds at the beginning of subsequent pro-  
grams is not recorded when you used timer recording to record  
multiple programs to a DVD-R.  
³Recording is not possible unless you set “Disc Protection” in “DISC  
SETTING” to “Off” (➡ page 53). [RAM]  
³You can not record to a disc if the disc is protected with the write-  
protect tab. Release this before operation (➡ page 99). [RAM]  
³Timer recording may not work as set when summer time switches  
to winter time and vice versa (➡ page 88).  
A
POWER  
Avcdperations  
To change the timer recording  
program  
!?  
TOP  
B
»
B
TIMER  
1
Remaining Recording Time 0:17 SP  
No CHANNEL DATE ON OFF MODE  
RECORDING  
Date  
Time  
CH  
1
2
3
4
64 ABC 1/ 1 SAT 12:00 AM 1:00 AM SP  
64 ABC 1/ 2 SUN 12:00 AM 1:00 AM SP  
ENTER  
ENTER  
64 ABC 1/  
3
MON 12:00 AM 1:00 AM SP  
---- ---------- --:-- ----:-- -- --  
Cancel  
1
While the timer recording list is being shown  
Use the joystick [3, 4] to select the  
program you want to change, and  
2
ENTER  
ENTER  
ENTER  
press [ENTER].  
The timer recording setting screen is shown.  
2 Move through the items with the  
joystick [1] and change the settings  
with the joystick [3, 4] and press  
[ENTER].  
C
CANCEL  
ENTER  
To delete a timer recording  
program  
TOP  
C
»
TIMER  
Remaining Recording Time 0:17 SP  
No CHANNEL DATE ON OFF MODE  
RECORDING  
Date  
Time  
CH  
1
2
3
4
64 ABC 1/ 1 SAT 12:00 AM 1:00 AM SP  
64 ABC 1/ 2 SUN 12:00 AM 1:00 AM SP  
64 ABC 1/  
3
MON 12:00 AM 1:00 AM SP  
---- ---------- --:-- ----:-- -- --  
Cancel  
While the timer recording list is being shown  
Use the joystick [3, 4] to select the  
program you want to clear and press  
[CANCEL].  
Note  
47  
You cannot delete programs that are currently recording.  
RQT6035  
Timer recording  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
A
»
To check programs  
OPEN/CLOSE  
POWER  
POWER  
Í
P
Press [PROG/CHECK].  
The timer recording list appears.  
TIMER  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
Remaining Recording Time 0:17 SP  
RECORDING  
PROG/CHECK  
RETURN  
STATUS  
TOP WINDOW  
Date  
Time  
No CHANNEL  
DATE  
ON  
OFF MODE  
CH  
W
W
1
2
3
4
5
6
64 ABC 1/ 1 SAT 12:00 AM 1:00 AM SP  
64 ABC 1/ 1 SAT 12:30 AM 1:30 AM SP  
SKIP  
SLOW/SEARCH  
64 ABC 1/  
64 ABC 1/  
64 ABC 1/  
64 ABC 1/  
2
3
4
4
SUN 12:30 AM 1:30 AM SP  
MON 2:00 PM 3:00 PM SP  
TUE 2:00 AM 3:00 AM SP  
TUE 3:00 AM 5:00 AM SP  
STOP  
PAUSE  
PLAY  
X
¥
F
CANCEL  
SELECT  
∫, STOP  
1
4
2
5
8
0
3
6
ENTER  
RETURN  
7
9
VCR Plus+  
100  
Icon explanations  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
!?  
W The times overlap those in another program.  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
´ This program is currently recording.  
MARKER  
WRITE  
ACTION  
F The disc was full or the maximum number of programs or scenes  
was reached so the program failed to record.  
The material was copy-guarded so the material failed to record.  
X The program failed to record for some other reason.  
º To change the program  
➡ page 47  
A
º To exit the timer recording list  
Press [PROG/CHECK] or [RETURN]. (The television is shown.)  
PROG / CHECK  
For your reference  
Programs that failed to record are displayed gray. These  
programs are deleted from the list at 4 a.m. the day after  
tomorrow.  
!?  
Acvdperations  
Releasing the unit from timer  
standby  
B
C
POWER  
POWER  
º To release the unit from recording standby [B]  
If you want to record something else before the program start time,  
for example:  
Press [ê, POWER].  
The unit turns on and “ç” goes out.  
³Be sure to press [ê, POWER] before the program start time to put  
the unit on timer recording standby. The program only works if “ç”  
is on.  
º To put the unit on timer recording standby [C]  
Press [ê, POWER].  
The unit turns off and “ç” lights on the unit’s display.  
D
STOP  
Note  
POWER  
“ç” flashes when the unit couldn’t go to timer recording standby  
(e.g., a disc isn’t loaded, a disc that can’t be recorded to is loaded,  
or the disc is protected). Check the disc carefully.  
º To stop recording while a program is working [D]  
Press [ê, POWER], then [º, STOP] within  
5 seconds.  
Recording stops. Recording standby is also canceled if there are  
other timer recording programs, so be sure to press [ê, POWER] to  
put the unit on timer recording standby.  
48  
RQT6035  
Recording from a video  
cassette recorder  
TV  
CH  
VOL  
POWER  
TV/AV  
OPEN/CLOSE  
POWER  
[RAM] [DVD-R]  
P
You can record audio and video being played on a video cassette  
recorder or video camera connected to the input terminals.  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
Preparation  
³Connect the other equipment to this unit’s input terminals  
(➡ page 79).  
³Switch [DVD, TV] to “DVD”.  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
∫, STOP  
³Insert a disc that can be recorded on.  
³Select the recording mode, XP, SP, LP, or EP (➡ page 26).  
;, PAUSE  
1
4
2
5
8
0
3
6
1
While stopped  
7
9
VCR Plus+  
100  
Press [INPUT SELECT] to select the  
input channel for the equipment you  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
3
TIME SLIP CM SKIP  
SELECT  
DVD ,  
,
,CH  
have connected.  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
Select L1, L2, or L3.  
1
MARKER  
WRITE  
ACTION  
DVD, TV  
2 Start play on the other equipment.  
3 Press [´, REC] at the point you want  
to start recording.  
º To skip unwanted parts  
Press [;, PAUSE] to pause recording.  
Press again to restart recording.  
1
3
INPUT  
SELECT  
º To stop recording  
Press [º, STOP].  
Stop play on the other equipment as well.  
Avcdperations  
For your reference  
³You can also select the input channel by pressing [[DVD], W, X,  
CH] in step 1.  
³This unit complies with industry standards regarding the recording  
and duplication of copy-protected material. This includes commer-  
cial videotapes and DVDs. Apart from infringing copyright laws,  
copies of protected material are often of very poor quality.  
When you have selected “L1”  
REC  
49  
RQT6035  
Disc setting  
TV  
CH  
VOL  
POWER  
TV/AV  
About DISC SETTING  
OPEN/CLOSE  
POWER  
P
[RAM] [DVD-R]  
³You can give discs titles—Enter Title  
³You can write-protect and write-enable DVD-RAM—Disc  
Protection  
³You can format DVD-RAM—Format  
³You can finalize DVD-R—Finalize  
ENTER  
FRAME  
2·3  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
1
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
TOP  
Enter Title  
1
4
2
5
8
0
3
6
[RAM] [DVD-R]  
7
9
VCR Plus+  
100  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you have recorded on.  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
1
While stopped  
DVD, TV  
Press [TOP WINDOW].  
2 Use the joystick [3, 4, 2, 1] to  
select “DISC SETTING” and press  
[ENTER].  
1
2
DISC SETTING  
TOP WINDOW  
3 Use the joystick [3, 4] to select  
“Enter Title” and press [ENTER].  
Acvdperations  
e.g. DVD-RAM  
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
Enter Title  
ENTER  
ENTER  
Off  
Disc Protection  
Format  
SELECT  
ENTER  
RETURN  
4 Enter the title (➡ page 51).  
3
Enter Title  
_
A
F
B
G
L
C
H
M
R
W
>
D
I
E
J
a
f
b
g
l
c
h
m
r
d
i
e
j
0
1
6
-
2
7
3
8
/
4
ENTER  
ENTER  
5
+
9
=
K
P
U
Z
N
S
X
(
O
T
Y
)
k
p
u
z
n
s
x
!
o
t
Q
V
<
q
v
[
&
:
#
;
$
"
\
%
'
@
`
w
]
y
?
,
.
SPACE  
SET  
ERASE  
SELECT  
ENTER  
RETURN  
Note  
³You can give DVD-RAM titles of up to 64 characters and DVD-R  
titles of up to 40 characters.  
³You cannot give DVD-R titles once they have been finalized.  
³You cannot enter titles if the disc is protected with the write-protect  
tab (➡ page 99).  
³You cannot enter titles if the disc is protected with DISC SETTING  
(➡ page 52).  
50  
RQT6035  
Disc setting  
TV  
CH  
VOL  
POWER  
TV/AV  
Entering characters for titles  
OPEN/CLOSE  
POWER  
P
[RAM] [DVD-R]  
1
After the titling screen appears  
ENTER  
FRAME  
1·2  
PROG / CHECK  
RETURN  
STATUS  
Use the joystick [3, 4, 2, 1] to  
select the character you want to enter  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
and press [ENTER].  
STOP  
PAUSE  
PLAY  
You can enter the following characters.  
Title field: shows the text you have entered  
1
4
2
5
8
0
3
6
Upper case  
Lower case  
Numbers  
7
9
VCR Plus+  
100  
Enter Title  
_
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
A
F
B
G
L
C
H
M
R
W
>
D
I
E
J
a
f
b
g
l
c
h
m
r
d
i
e
j
0
1
6
-
2
7
3
8
/
4
MARKER  
WRITE  
ACTION  
5
+
9
=
K
P
U
Z
N
S
X
(
O
T
Y
)
k
p
u
z
n
s
x
!
o
t
Q
V
<
q
v
[
&
:
#
;
$
"
\
%
'
@
`
w
]
y
?
,
.
SPACE  
SET  
ERASE  
SELECT  
ENTER  
1·2  
RETURN  
ERASE SPACE  
SET (when you have finished entering text)  
Symbols  
Avcdperations  
ENTER  
Repeat step 1 to enter other characters.  
2 Use the joystick [3, 4, 2, 1] to  
select “SET” and press [ENTER].  
ENTER  
The title is entered and the screen disappears.  
º To correct a character  
1 Use the joystick [3, 4, 2, 1] to select the character you want  
to correct in the title field.  
2 Use the joystick [3, 4] to move outside the title field.  
3 Use the joystick [3, 4, 2, 1] to select “ERASE” and press  
[ENTER].  
4 Use the joystick [3, 4, 2, 1] to select the correct character  
and press [ENTER].  
51  
RQT6035  
Disc setting  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Disc Protection  
OPEN/CLOSE  
POWER  
P
[RAM]  
This allows you protect discs from accidental erasure.  
ENTER  
FRAME  
2·3·4  
PROG / CHECK  
RETURN  
STATUS  
RETURN  
TOP WINDOW  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert the disc you want to protect.  
1
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
1
While stopped  
Press [TOP WINDOW].  
1
4
2
5
8
0
3
6
2 Use the joystick [3, 4, 2, 1] to se-  
lect “DISC SETTING” and press  
[ENTER].  
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DISC SETTING  
DVD, TV  
3 Use the joystick [3, 4] to select “Disc  
Protection” and press [ENTER].  
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
Enter Title  
1
TOP WINDOW  
Off  
Disc Protection  
Format  
Disc  
protection is  
Off.  
SELECT  
ENTER  
Acvdperations  
RETURN  
4 Use the joystick [2, 1] to select  
“Yes” and press [ENTER].  
2
3
4
ENTER  
ENTER  
ENTER  
ENTER  
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
Protection  
Set up Disc Protection.  
SELECT  
Yes  
No  
ENTER  
ENTER  
RETURN  
When you press [ENTER]  
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
ENTER  
Enter Title  
On  
Disc Protection  
Format  
Disc  
protection is  
On.  
SELECT  
ENTER  
RETURN  
º To stop partway through  
In step 4, either select “No” and press [ENTER] or press [RETURN].  
52  
RQT6035  
Disc setting  
TV  
CH  
VOL  
POWER  
TV/AV  
Releasing disc  
protection  
!?  
OPEN/CLOSE  
TOP  
POWER  
P
L
[RAM]  
ENTER  
FRAME  
2·3·4  
PROG / CHECK  
RETURN  
STATUS  
RETURN  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert the disc you want to release protection.  
TOP WINDOW  
1
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
1
While stopped  
Press [TOP WINDOW].  
1
4
2
5
8
0
3
6
2 Use the joystick [3, 4, 2, 1] to  
select “DISC SETTING” and press  
[ENTER].  
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
DISC SETTING  
MARKER  
WRITE  
ACTION  
DVD, TV  
3 Use the joystick [3, 4] to select “Disc  
Protection” and press [ENTER].  
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
Enter Title  
1
On  
Disc Protection  
Format  
Disc  
protection is  
On.  
TOP WINDOW  
SELECT  
ENTER  
RETURN  
Avcdperations  
4 Use the joystick [2, 1] to select  
“Yes” and press [ENTER].  
2
3
4
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
ENTER  
ENTER  
ENTER  
ENTER  
0 : 58 Total Mark 10  
Protection  
Cancel Disc Protection.  
SELECT  
Yes  
No  
ENTER  
ENTER  
RETURN  
When you press [ENTER]  
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
ENTER  
Enter Title  
Off  
Disc Protection  
Format  
Disc  
protection is  
Off.  
SELECT  
ENTER  
RETURN  
º To stop partway through  
In step 4, either select “No” and press [ENTER] or press  
[RETURN].  
53  
RQT6035  
Disc setting  
TV  
CH  
VOL  
POWER  
TV/AV  
!?  
TOP  
Format  
OPEN/CLOSE  
POWER  
[RAM]  
Some DVD-RAM are unformatted. You must format these discs be-  
fore you can use them in this unit. Formatting also allows you to  
erase the entire contents of a disc.  
P
L
ENTER  
FRAME  
2·3·4·5  
PROG / CHECK  
RETURN  
STATUS  
All recordings are irretrievably erased when a disc is format-  
ted. Check the disc carefully before formatting to ensure it  
doesn’t contain any programs you want to keep.  
RETURN  
TOP WINDOW  
1
SKIP  
SLOW/SEARCH  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert the disc you want to format.  
STOP  
PAUSE  
PLAY  
1
4
2
5
8
0
3
6
1
2
While stopped  
Press [TOP WINDOW].  
Use the joystick  
select “DISC SETTING” and press [ENTER].  
7
9
VCR Plus+  
[
3
,
4
,
2
,
1]  
to  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
DISC SETTING  
MARKER  
WRITE  
ACTION  
DVD, TV  
3 Use the joystick [3, 4] to select  
“Format” and press [ENTER].  
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
Enter Title  
Off  
Disc Protection  
Format  
1
SELECT  
TOP WINDOW  
ENTER  
RETURN  
Acvdperations  
4 Use the joystick [2, 1] to select  
“Yes” and press [ENTER].  
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
Format Disc  
2
3
Formatting the Disc will erase all contents.  
This will take approximately 1 minute.  
Is it OK to start formatting the disc?  
ENTER  
ENTER  
SELECT  
Yes  
No  
ENTER  
RETURN  
5 Use the joystick [2, 1] to select  
“Start” and press [ENTER].  
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
ENTER  
ENTER  
Format Disc  
All contents of this disc will be  
completely erased.  
Is it OK to start formatting the disc?  
SELECT  
ENTER  
Start  
Cancel  
RETURN  
Formatting starts.  
The message “Formatting is completed” appears when for-  
matting is finished.  
4·5  
ENTER  
ENTER  
º To stop formatting  
Press [RETURN] in steps 4 and 5, or select “No” in step 4, “Cancel”  
in step 5 and press [ENTER].  
Note  
³
Do not turn the unit off or disconnect the AC power supply cord  
while the message “Formatting the disc” is on the television.  
This can render the disc unusable.  
(Formatting takes up to 70 minutes. You can cancel formatting if it  
takes more than 2 minutes by pressing [RETURN]. The disc must  
be reformatted if you do this.)  
54  
³
All data on the disc is erased when it is formatted, including recordings  
made with this unit. Data written to the disc by a computer is also erased.  
RQT6035  
Disc setting  
TV  
CH  
VOL  
POWER  
TV/AV  
For your reference  
³The disc cannot be formatted if the disc is protected with the write-protect tab.  
Release the protection to continue (➡ page 99).  
³Formatting cannot be performed on DVD-R or CD-R/RW.  
³The message “Unable to format” appears when you try to format discs this  
unit cannot use.  
OPEN/CLOSE  
POWER  
P
³If you have used the direct navigator to protect a program or DISC SETTING  
to protect the disc, the message “Contents on the disc have been protect-  
ed. Is it OK to start formatting the disc?” appears in step 5. Select “Start” if  
you want to format the disc. The contents will be erased even if they have  
been protected.  
ENTER  
FRAME  
2·3·4·5  
PROG / CHECK  
RETURN  
STATUS  
RETURN  
TOP WINDOW  
1
SKIP  
SLOW/SEARCH  
TOP  
Finalize—Creating DVD-Video  
STOP  
PAUSE  
PLAY  
[DVD-R]  
You can play DVD-R on compatible DVD players by finalizing them on this unit,  
effectively making them into DVD-Video.  
1
4
2
5
8
0
3
6
The titles you entered with this unit appear as menus when you play the finalized disc.  
7
9
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert the disc you want to finalize.  
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
1
2
While stopped  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
Press [TOP WINDOW].  
Use the joystick  
select “DISC SETTING” and press [ENTER].  
MARKER  
WRITE  
ACTION  
[3  
,
4
,
2
,
1]  
to  
DVD, TV  
DISC SETTING  
3 Use the joystick [3, 4] to select  
“Finalize” and press [ENTER].  
1
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
TOP WINDOW  
Avcdperations  
Enter Title  
Finalize  
SELECT  
4 Use the joystick [2, 1] to select  
“Yes” and press [ENTER].  
2
3
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
ENTER  
ENTER  
Finalize  
This will take appoximately 10 minutes.  
Is it OK to start finalizing the disc?  
SELECT  
Yes  
No  
ENTER  
RETURN  
5 Use the joystick [2, 1] to select  
“Start” and press [ENTER].  
ENTER  
ENTER  
DISC SETTING  
Prog #  
Used  
7
Free  
0 : 42 (SP)  
0 : 58 Total Mark 10  
Finalize  
Finalize will make this disc playback only.  
Is it OK to start finalizing the disc?  
SELECT  
ENTER  
4·5  
Start  
Cancel  
RETURN  
ENTER  
ENTER  
Finalizing starts.  
The message “Finalizing is finished” appears when finalizing is finished.  
º To stop finalizing  
Press [RETURN] in steps 4 and 5, or select “No” in step 4, “Cancel” in step 5  
and press [ENTER].  
Note  
Do not turn the unit off or disconnect the AC power supply cord while the  
message “Finalizing” is on the television.  
This will render the disc unusable.  
³You can only finalize DVD-R that were recorded on this unit.  
³You cannot record on DVD-R that have been finalized.  
³The markers you entered (➡ page 36) will be lost.  
³Finalizing takes up to 15 minutes.  
55  
RQT6035  
Using the direct navigator  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Selecting programs to play  
OPEN/CLOSE  
POWER  
TOP MENU,  
DIRECT  
P
[RAM] [DVD-R]  
NAVIGATOR  
A list of programs is created as you record them. You can use this  
list to find the programs you want to watch.  
ENTER  
FRAME  
2·3  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
1
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you have recorded on.  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
3
1
While stopped  
1
4
2
5
8
0
3
6
Press [TOP WINDOW].  
Numbered  
buttons  
7
9
VCR Plus+  
100  
2 Use the joystick [3, 4, 2, 1] to  
select “DIRECT NAVIGATOR” and  
press [ENTER].  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
N
S
ACTION  
DVD, TV  
DIRECT NAVIGATOR  
The program list appears.  
The images for the currently highlighted list are played in the  
background.  
DIRECT NAVIGATOR  
1
2
No CH  
DATE  
TIME  
TITLE  
EDIT  
1
TOP WINDOW  
3
1
2
3
4
6
13  
6/20 WED 10：00 AM Dinosaur  
6/20 WED  
6/20 WED  
1
Auto action  
9：00 PM  
11：00 PM USJ  
1
1
3
1
Acvdperations  
SELECT  
ENTER  
TOTAL 3  
No  
~
0
9
RETURN  
3 Use the joystick [3, 4] to select the  
ENTER  
ENTER  
program you want to watch and press  
[ENTER] or [1, PLAY].  
Play of the images that were playing in the background con-  
tinues.  
DIRECT NAVIGATOR  
3
PLAY  
No CH  
DATE  
TIME  
TITLE  
EDIT  
1
ENTER  
ENTER  
or  
3
1
2
3
4
6
13  
6/20 WED 10：00 AM Dinosaur  
6/20 WED  
6/20 WED  
Auto action  
1
9：00 PM  
11：00 PM USJ  
For example,  
when you select  
program  
1
1
3
1
SELECT  
ENTER  
TOTAL 3  
No  
~
number 2.  
0
9
RETURN  
A
³Use the joystick [4] to show program six and later.  
º To clear the program list  
Press [TOP MENU, DIRECT NAVIGATOR].  
For your reference  
[A] You can also display the program list by pressing [TOP MENU,  
DIRECT NAVIGATOR] in step 1.  
³The direct navigator works while recording (DVD-RAM), stopped  
or playing.  
³You can also select programs from the list in step 3 by entering a  
2-digit number with the numbered buttons (➡ page 8) and pressing  
[ENTER].  
If you enter a number larger than the total number of programs, the  
last program is selected.  
56  
³Titles are only displayed if you have given the program a title.  
RQT6035  
Using the direct navigator  
About the program list  
TV  
CH  
VOL  
POWER  
TV/AV  
OPEN/CLOSE  
POWER  
P
DIRECT NAVIGATOR  
DIRET NAIGATOR  
Joystick  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
h
STATUS  
TOP WINDOW  
No CH  
DATE  
TIME  
Erase Program  
EDIT  
1
3
a
1
2
3
4
5
4
6
13  
2
6/20 WED 10：00 AM Din
Enter Title  
9：00 PM Au
1
6/20 WED  
6/20 WED  
6/21 THU  
6/22 FRI  
SKIP  
SLOW/SEARCH  
b
d
f
Properties  
Protection  
12：00 PM So
1
c
e
11：00 PM US
1
STOP  
PAUSE  
PLAY  
X
Shorten Segment  
1
3
8
21：00 PM  
¥
SELECT  
TOTAL 5  
No  
~
RETURN  
ENTER  
1
4
2
5
8
0
3
6
0
9
g
ENTER  
7
9
VCR Plus+  
100  
DVD  
CH  
a Program number, channel number (or caption), recording  
date, time recording started, program title (if entered).  
Program 1 is selected in the example.  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
b
Write-protected  
MARKER  
WRITE  
ACTION  
Displayed when you have protected the program. Program 2 has  
been protected in the example.  
c
Copy-protected  
Displayed when you have recorded a program that has copy pro-  
tection, from CATV broadcasts, for example.  
d x Unable to play  
Displayed if you cannot play the program.  
e ´ Currently recording  
Displayed when the program is being recorded.  
f Scroll bar  
If there are more than six programs, you can move down the list  
by using the joystick [3, 4] and this bar shows your approxi-  
mate position in the list.  
ENTER  
g Total number of programs  
Avcdperations  
Shows the total number of programs.  
h Submenu  
Displayed when you use the joystick [1]. (You can see this  
during simultaneous rec and play but you are unable to perform  
operations.)  
³Erase a program (➡ page 58).  
³Enter or edit a title (➡ page 59).  
³Check a program’s contents (➡ page 62).  
³Write-protect a program (➡ page 60).  
³Erase part of a program (➡ page 63).  
For your reference  
³The list can show up to 99 programs that you have recorded or  
programmed to record.  
³The message “Maximum amount of programs are exceeded,  
cannot record” is displayed if you try to start recording when  
there are already 99 programs on a disc. Erase unneeded pro-  
grams (DVD-RAM only) or use a new disc to continue recording.  
³When using DVD-R, “Protection” and “Shorten Segment” are not  
displayed in the submenu.  
³The contents of the list are recorded on the disc.  
57  
RQT6035  
Using the direct navigator  
TV  
CH  
VOL  
POWER  
TV/AV  
!?  
TOP  
Erasing programs  
OPEN/CLOSE  
POWER  
P
[RAM] [DVD-R]  
The program is erased completely when you use this proce-  
dure and cannot be retrieved. Check the program carefully  
before erasing it to ensure it isn’t one you want to keep.  
2·3·4  
5·6·7  
RETURN  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
1
SKIP  
SLOW/SEARCH  
Preparation  
STOP  
PAUSE  
PLAY  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you have recorded on.  
1
4
2
5
8
0
3
6
1
While stopped  
7
9
Press [TOP WINDOW].  
VCR Plus+  
100  
DVD  
REC REC MODE CANCEL  
INPUT  
CH  
2 Use the joystick [3, 4, 2, 1] to  
select “DIRECT NAVIGATOR” and  
press [ENTER].  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DVD, TV  
TOP WINDOW  
ENTER  
N
S
DIRECT NAVIGATOR  
3 Use the joystick [3, 4] to select the  
program you want to erase.  
4 Use the joystick [1] so the submenu  
appears.  
1
2
4
6
5 Use the joystick [3, 4] to select  
“Erase Program” and press [ENTER].  
Acvdperations  
Erase Program  
Enter Title  
Properties  
3
5
7
Protection  
ENTER  
ENTER  
Shorten Segment  
6 Use the joystick [2, 1] to select  
“Erase”.  
DIRECT NAVIGATOR  
ENTER  
ENTER  
ENTER  
Erase Program  
EDIT  
1
3
1
Remaining Recording Time 0 : 58 SP  
1
CorrespondingPLAY LIST willalso be erased.  
1
3
Erase  
Cancel  
1
SELECT  
T
RETURN  
ENTER  
ENTER  
ENTER  
7 Press [ENTER].  
º To stop partway through  
In step 6, either select “Cancel” and press [ENTER] or press  
[RETURN].  
For your reference  
³The disc’s available recording time may not increase after erasing  
short programs.  
³Computer data cannot be erased.  
³The available recording time on DVD-R does not increase when  
you erase programs.  
58  
RQT6035  
Using the direct navigator  
TV  
CH  
VOL  
POWER  
TV/AV  
Entering and editing program  
titles  
TOP  
OPEN/CLOSE  
POWER  
P
[RAM] [DVD-R]  
2·3·4·5  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you have recorded on.  
STATUS  
TOP WINDOW  
1
SKIP  
SLOW/SEARCH  
1
While stopped  
STOP  
PAUSE  
PLAY  
Press [TOP WINDOW].  
1
4
2
5
8
0
3
6
2 Use the joystick [3, 4, 2, 1] to  
select “DIRECT NAVIGATOR” and  
press [ENTER].  
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
N
S
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
DIRECT NAVIGATOR  
MARKER  
WRITE  
ACTION  
DVD, TV  
3 Use the joystick [3, 4] to select the  
program whose title you want to enter  
or edit.  
TOP WINDOW  
1
2
4 Use the joystick [1] so the submenu  
appears.  
5 Use the joystick [3, 4] to select  
“Enter Title” and press [ENTER].  
Erase Program  
Enter Title  
ENTER  
ENTER  
Avcdperations  
Properties  
Protection  
Shorten Segment  
3
4
5
6 Enter or edit the title.  
ENTER  
Enter titles as with disc titling (➡ page 51).  
EnterTitle  
_
A
F
B
G
L
C
H
M
R
W
>
D
I
E
J
a
f
b
g
l
c
h
m
r
d
i
e
j
0
1
6
-
2
7
3
8
/
4
5
+
9
=
K
P
U
Z
N
S
X
(
O
T
Y
)
k
p
u
z
n
s
x
!
o
t
Q
V
<
q
v
[
&
:
#
;
$
"
\
%
'
@
`
w
]
y
?
ENTER  
,
.
SPACE  
SET  
ERASE  
SELECT  
ENTER  
RETURN  
For your reference  
You can give the programs on DVD-RAM titles of up to 64 charac-  
ters and programs on DVD-R titles of up to 44 characters.  
ENTER  
ENTER  
Note  
³You cannot enter titles if the disc is protected with the write-protect  
tab (➡ page 99).  
³You cannot enter titles if the disc is protected with DISC SETTING  
(➡ page 52).  
³You cannot enter titles if the program is protected with the direct  
navigator (➡ page 60).  
³Even if you have entered up to the maximum number of characters,  
characters you enter after the position marked with “ ” in the title field  
4
and the two characters immediately prior to the mark will be replaced  
with “&” when displayed in the direct navigator.  
59  
RQT6035  
Using the direct navigator  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Protecting programs  
OPEN/CLOSE  
POWER  
P
[RAM]  
You can prevent accidental erasure of programs by write-protecting  
them.  
2·3·4·  
5·6  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
1
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you have recorded on.  
SKIP  
SLOW/SEARCH  
RETURN  
STOP  
PAUSE  
PLAY  
1
While stopped  
1
4
2
5
8
0
3
6
Press [TOP WINDOW].  
7
9
VCR Plus+  
2 Use the joystick [3, 4, 2, 1] to  
select “DIRECT NAVIGATOR” and  
press [ENTER].  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
N
S
MARKER  
WRITE  
ACTION  
DVD, TV  
DIRECT NAVIGATOR  
3 Use the joystick [3, 4] to select the  
program you want to protect.  
4 Use the joystick [1] so the submenu  
appears.  
TOP WINDOW  
5 Use the joystick [3, 4] to select  
1
2
“Protection” and press [ENTER].  
Erase Program  
Enter Title  
Acvdperations  
Properties  
Protection  
ENTER  
ENTER  
Shorten Segment  
6 Use the joystick [2, 1] to select  
“Yes” and press [ENTER].  
3
DIRECT NAVIGATOR  
ENTER  
No DATE  
CTME  
TITLE  
EDIT  
1
Protection  
3
1
SetUp Program Protection.  
1
1
Yes  
No  
3
1
SELECT  
RETURN  
TO
ENTER  
4
5
ENTER  
When you press [ENTER]  
DIRECT NAVIGATOR  
No CH  
DATE  
TIME  
TITLE  
EDIT  
1
3
1
2
3
4
6
13  
6/20 WED 10：00 AM Soccer  
1
6/20 WED  
6/20 WED  
Dinosaur  
9：00 PM  
11：00 PM USJ  
1
ENTER  
ENTER  
1
3
1
SELECT  
ENTER  
TOTAL 3  
No  
~
0
9
RETURN  
6
The padlock mark appears.  
ENTER  
ENTER  
º To stop partway through  
In step 6, either select “No” and press [ENTER] or press [RETURN].  
For your reference  
Programs will be erased even if they are protected if you format the  
disc with DISC SETTING (➡ page 54).  
60  
RQT6035  
Using the direct navigator  
TV  
CH  
VOL  
POWER  
TV/AV  
Releasing program  
protection  
!?  
TOP  
OPEN/CLOSE  
POWER  
P
[RAM]  
2·3·4·  
5·6  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you have recorded on.  
STATUS  
TOP WINDOW  
1
SKIP  
SLOW/SEARCH  
RETURN  
STOP  
PAUSE  
PLAY  
1
While stopped  
Press [TOP WINDOW].  
1
4
2
5
8
0
3
6
2 Use the joystick [3, 4, 2, 1] to  
select “DIRECT NAVIGATOR” and  
press [ENTER].  
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
N
S
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
DIRECT NAVIGATOR  
ACTION  
DVD, TV  
3 Use the joystick [3, 4] to select the  
program you want to unprotect.  
4 Use the joystick [1] so the submenu  
appears.  
5 Use the joystick [3, 4] to select  
TOP WINDOW  
1
2
“Protection” and press [ENTER].  
Erase Program  
Enter Title  
Avcdperations  
Properties  
Protection  
ENTER  
ENTER  
Shorten Segment  
6 Use the joystick [2, 1] to select  
“Yes” and press [ENTER].  
3
DIRECT NAVIGATOR  
ENTER  
No DATE  
CTIME  
TTLE  
EDIT  
1
Protection  
3
1
Cancel Program Protection.  
1
1
Yes  
No  
3
1
SELECT  
To
RETURN  
ENTER  
4
5
ENTER  
When you press [ENTER]  
DIRECT NAVIGATOR  
No CH  
DATE  
TIME  
TITLE  
EDIT  
1
3
1
2
3
4
6
13  
6/20 WED 10：00 AM Soccer  
1
6/20 WED  
6/20 WED  
Dinosaur  
9：00 PM  
11：00 PM USJ  
1
ENTER  
ENTER  
1
3
1
SELECT  
ENTER  
TOTAL 3  
No  
~
0
9
RETURN  
The padlock mark disappears.  
6
ENTER  
ENTER  
º To stop partway through  
In step 6, either select “No” and press [ENTER] or press [RETURN].  
61  
RQT6035  
Using the direct navigator  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Checking program contents  
OPEN/CLOSE  
POWER  
P
[RAM] [DVD-R]  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you have recorded on.  
2·3·4·  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
5
1
SKIP  
SLOW/SEARCH  
1
While stopped  
STOP  
PAUSE  
PLAY  
Press [TOP WINDOW].  
RETURN  
2 Use the joystick [3, 4, 2, 1] to  
select “DIRECT NAVIGATOR” and  
press [ENTER].  
1
4
2
5
8
0
3
6
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
N
S
TIME SLIP CM SKIP  
SELECT  
DIRECT NAVIGATOR  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
3 Use the joystick [3, 4] to select the  
program whose contents you want to  
check.  
DVD, TV  
4 Use the joystick [1] so the submenu  
appears.  
5 Use the joystick [3, 4] to select  
“Properties” and press [ENTER].  
1
2
TOP WINDOW  
Erase Program  
Enter Title  
Acvdperations  
Properties  
Protection  
Shorten Segment  
When you press [ENTER]  
ENTER  
ENTER  
The contents of the  
DIRECT NAVIGATOR  
program are shown:  
Program number,  
EDIT  
1
recording date, channel,  
recording start time,  
length of recording and  
recording mode.  
Properties  
3
3
Soccer  
1
1
ENTER  
N
o
.
3
O
n
1:02 PM  
(
)
1
Date 7/13/ 2001 TUE Time 0:01 SP  
CH 12  
3
1
RETURN  
T
ENTER  
4
5
º To return to the previous screen  
Press [RETURN].  
ENTER  
ENTER  
ENTER  
62  
RQT6035  
Using the direct navigator  
TV  
CH  
VOL  
POWER  
TV/AV  
Erasing parts of a program—  
Shorten Segment  
OPEN/CLOSE  
TOP  
POWER  
P
[RAM]  
2·3·4·  
5·6  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
The specified parts of the program are erased completely  
when you use this procedure and cannot be retrieved. Check  
the program carefully to ensure it isn’t one you want to keep.  
1
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you have recorded on.  
1
4
2
5
8
0
3
6
7
9
1
While stopped  
VCR Plus+  
100  
DVD  
CH  
Press [TOP WINDOW].  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
2 Use the joystick [3, 4, 2, 1] to  
select “DIRECT NAVIGATOR” and  
press [ENTER].  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DVD, TV  
N
S
DIRECT NAVIGATOR  
3 Use the joystick [3, 4] to select the  
program which contains the part you  
want to erase.  
1
2
TOP WINDOW  
4 Use the joystick [1] so the submenu  
appears.  
Avcdperations  
5 Use the joystick [3, 4] to select  
“Shorten  
Segment”  
and  
press  
[ENTER].  
ENTER  
ENTER  
Erase Program  
Enter Title  
Properties  
Protection  
3
Shorten Segment  
ENTER  
6 Use search functions such as fast-  
forward and slow-motion to find the  
start point of the part you want to  
erase and press [ENTER].  
4
5
ENTER  
Shorten  
Segment  
3
PLAY  
N
Start  
End  
S
Next  
Exit  
3
0 : 00 . 05  
SELECT  
ENTER  
ENTER  
ENTER  
Start  
End  
RETURN  
– : – – . – –  
0 : 00 . 05  
(Continued on next page)  
6
ENTER  
63  
RQT6035  
Using the direct navigator  
TV  
CH  
VOL  
POWER  
TV/AV  
7 Use search functions such as fast-  
forward and slow-motion to find the  
end point of the part you want to erase  
and press [ENTER].  
OPEN/CLOSE  
POWER  
P
7·8·9  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
Shorten  
Segment  
RETURN  
STATUS  
TOP WINDOW  
3
N
Start  
S
SKIP  
SLOW/SEARCH  
End  
Next  
STOP  
PAUSE  
PLAY  
Exit  
33  
0 : 10 . 15  
End  
1
4
2
5
8
0
3
6
SELECT  
ENTER  
Start  
RETURN  
2001  
0 : 00 . 05  
0 : 10 . 15  
7
9
VCR Plus+  
100  
DVD  
CH  
8 Use the joystick [3, 4] to select  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
“Exit” and press [ENTER].  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
Shorten  
Segment  
MARKER  
WRITE  
ACTION  
3
N
Start  
S
End  
Next  
Exit  
33  
0 : 10 . 15  
End  
SELECT  
ENTER  
Start  
RETURN  
0 : 00 . 05  
0 : 10 . 15  
7
8
9 Use the joystick [2, 1] to select  
ENTER  
“Erase” and press [ENTER].  
Shorten  
Segment  
Acvdperations  
3
N
S
Shorten Segment  
0:19 SP  
Remaining Recording Time  
Corresponding PLAY LIST will also be erased.  
Erase  
Cancel  
ENTER  
ENTER  
SELECT  
End  
SELECT  
ENTER  
RETURN  
ENTER  
Start  
RETURN  
0 : 00 . 05  
0 : 10 . 15  
º To stop partway through  
Press [RETURN] or select “Cancel” and press [ENTER] in step 9.  
º To erase another part of the same program  
Select “Next” after step 7 and press [ENTER], then repeat steps 9,  
6 and 7.  
Shorten  
Segment  
3
N
9
Start  
S
End  
ENTER  
ENTER  
Next  
Exit  
33  
0 : 10 . 15  
End  
SELECT  
ENTER  
Start  
RETURN  
0 : 00 . 05  
0 : 10 . 15  
For your reference  
³You can respecify the start or end points. The points you specify  
last are used.  
³You cannot specify an end point before a start point or a start point  
after an end point.  
³You may not be able to specify start and end points within  
3 seconds of each other.  
³You cannot specify start and end points if you have recorded still  
pictures on other equipment.  
³The unit pauses play when the end of the program is reached dur-  
ing this procedure.  
³The disc’s available recording time may not increase after erasing  
short parts of programs.  
³You cannot erase parts of protected programs.  
³Play lists created with the erased part are also erased.  
64  
RQT6035  
Using play lists to edit  
programs  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
OPEN/CLOSE  
POWER  
Displaying play lists  
P
[RAM]  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you have recorded on.  
MENU,  
PLAY LIST  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
2
1
STATUS  
TOP WINDOW  
1
While stopped  
RETURN  
SKIP  
SLOW/SEARCH  
Press [TOP WINDOW].  
STOP  
PAUSE  
PLAY  
2 Use the joystick [3, 4, 2, 1] to  
select “PLAY LIST” and press  
[ENTER].  
1
4
2
5
8
0
3
6
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
PLAY LIST  
PLAY LIST  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
001  
004  
002  
---  
003  
---  
DVD, TV  
TOP WINDOW  
ENTER  
No DATE TOTAL SCENE  
TITLE  
EDIT  
1
1
1
1
1
1
3
1
2
3
10/23 0:03 006 Auto action  
10/26 0:07 006 USJ  
10/21 0:06 004 Dinosaur  
No  
~
0
9
SELECT  
ENTER  
- - - -  
/- - - -  
:
- - - - -  
RETURN  
3
1
2
The play list screen appears. Scenes are not displayed if you  
have not yet created a play list with the disc.  
Avcdperations  
º To clear the play list screen  
Press [MENU, PLAY LIST] or [RETURN].  
The screen returns to the state it was in before you called up the  
play list.  
º What you can do with the play list screen  
³Create play lists (➡ page 66)  
ENTER  
³Play play lists (➡ page 67)  
³Select a scene to play (➡ page 68)  
³Add, move, re-edit, and erase scenes (➡ pages 68–71)  
³Copy play lists (➡ page 72)  
³Erase play lists (➡ page 72)  
A
³Give play lists titles (➡ page 73)  
³Check a play list’s contents (➡ page 74)  
For your reference  
[A] You can also display the play list by pressing [MENU, PLAY  
LIST].  
About the play list scene screen  
a
PLAY LIST  
Play Scenes  
3 12/24 0:05 004  
Dinosaur  
b
c
001 00:00.19  
004  
002  
003  
---  
---  
---  
Select Page  
0
~
9
SELECT  
ENTER  
---  
---  
Prev.  
1 / 1  
Next  
RETURN  
a Play list information  
This shows the play list number, date of creation (month/date), total  
play time, the number of scenes it contains, and title (if entered).  
b Scenes  
9 scenes can be shown on a page.  
c Turning pages  
If there are more than nine scenes, use the joystick [3, 4, 2,  
1] to select “2 Prev.” or “Next 1” and press [ENTER] to move  
to the previous page or next page. You can also enter the three  
digits with the numbered buttons (➡ page 8).  
65  
RQT6035  
Using play lists to edit programs  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Creating play lists  
OPEN/CLOSE  
POWER  
[RAM]  
P
You can specify start and end points to create a scene, then specify  
the order in which these scenes are played. These scenes are not  
recorded separately so this doesn’t use up much of the disc’s ca-  
pacity.  
Preparation  
³Switch [DVD, TV] to “DVD”.  
2·3·4·  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
5
1
RETURN  
SKIP  
SLOW/SEARCH  
³Insert a disc you have recorded on.  
STOP  
PAUSE  
PLAY  
1
While stopped  
Press [TOP WINDOW].  
1
4
2
5
8
0
3
6
2 Use the joystick [3, 4, 2,  
1] to select “CREATE PLAY  
LIST” and press [ENTER].  
3 Use search functions such as  
fast-forward and slow-motion to find  
the start point of the scene and press  
[ENTER].  
7
9
VCR Plus+  
100  
CREATE PLAY LIST  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DVD, TV  
PLAY LIST No.3  
PLAY LIST  
Scene No.  
1
1
PLAY  
Start  
End  
Next  
Exit  
TOP WINDOW  
1
2
3
0 : 00 . 05  
End  
SELECT  
ENTER  
Start  
RETURN  
0 : 00 . 05  
--:--.--  
Acvdperations  
A thumbnail image of the start point appears.  
4 Use search functions such as  
fast-forward and slow-motion to find  
the end point of the scene and press  
[ENTER].  
ENTER  
ENTER  
PLAY LIST No.3  
PLAY LIST  
Scene No.  
1
1
Start  
End  
Next  
3·4  
Exit  
ENTER  
0 : 35 . 20  
End  
3
3
SELECT  
ENTER  
Start  
RETURN  
0 : 35 . 20  
0 : 00 . 05  
A thumbnail image of the end point appears.  
º To specify another scene  
5
Select “Next” and press [ENTER], then repeat steps 3 and 4.  
ENTER  
ENTER  
5 Use the joystick [3, 4] to select  
“Exit” and press [ENTER].  
PLAY LIST No.3  
PLAY LIST  
Scene No.  
1
1
Start  
End  
Next  
Exit  
0 : 35 . 20  
End  
3
3
SELECT  
ENTER  
Start  
RETURN  
0 : 35 . 20  
0 : 00 . 05  
The play lists screen appears.  
º To stop partway through  
Press [RETURN].  
66  
RQT6035  
Using play lists to edit programs  
TV  
CH  
VOL  
POWER  
TV/AV  
º To clear the play list screen  
Press [MENU, PLAY LIST].  
The screen returns to the state it was in before you called up the  
play list.  
MENU,  
PLAY LIST  
OPEN/CLOSE  
POWER  
P
For your reference  
2·3  
³One disc can have a maximum of 99 play lists and 999 scenes.  
These limits may be reduced under some conditions.  
³You can respecify the start or end points. The points you specify  
last are used.  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
1
SKIP  
SLOW/SEARCH  
³You cannot specify an end point before a start point or a start point  
after an end point.  
³If you specify an end point but not a start point, the unit determines  
the beginning of the program as the start point. Similarly, if you  
specify a start point but not an end point, the unit determines the  
end of the program as the end point.  
³You cannot specify start and end points if you have recorded still  
pictures on other equipment.  
³The unit pauses play when the end of the last program on the disc  
is reached during this procedure.  
STOP  
PAUSE  
PLAY  
∫, STOP  
1
4
2
5
8
0
3
6
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
³You cannot create or edit play lists if Disc Protection in DISC  
SETTING is On (➡ page 52).  
³You can not create or edit play lists if the disc is protected with the  
write-protect tab. Release this before operation (➡ page 99).  
MARKER  
WRITE  
ACTION  
DVD, TV  
TOP  
Playing play lists  
[RAM]  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you created play lists on.  
TOP WINDOW  
1
2
3
1
While stopped  
Press [TOP WINDOW].  
Avcdperations  
2 Use the joystick [3, 4, 2, 1] to  
select “PLAY LIST” and press  
[ENTER].  
ENTER  
ENTER  
PLAY LIST  
3 Use the joystick [3, 4] to select the  
play list you want to play and press  
[ENTER].  
All the scenes in the play list are played.  
³You can  
display the  
play lists after  
the sixth one  
by moving the  
joystick [4].  
PLAY LIST  
ENTER  
ENTER  
001  
004  
002  
003  
---  
---  
No DATE TOTAL SCENE  
TITLE  
EDIT  
1
1
1
1
1
1
3
1
2
3
10/23 0:03 006 Auto action  
10/26 0:07 006 USJ  
10/21 0:06 004 Dinosaur  
No  
~
0
9
SELECT  
ENTER  
- - - -  
/- - - -  
:
- - - - -  
RETURN  
3
º To stop play list play  
Press [º, STOP].  
The play list appears.  
For your reference  
³You can also display the play list screen by pressing [MENU,  
PLAY LIST] at step 1.  
³You can fast-forward, rewind, pause, and slow-motion while play-  
ing scenes just as you can during normal play.  
³You can also select play lists from the list in step 3 by entering a  
2-digit number with the numbered buttons (➡ page 8) and pressing  
[ENTER].  
If you enter a number larger than the total number of play lists, the  
last play list is selected.  
67  
RQT6035  
Using play lists to edit programs  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Playing play list scenes  
OPEN/CLOSE  
POWER  
[RAM]  
Preparation  
P
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you created play lists on.  
2·3·4·  
5
ENTER  
FRAME  
PROG / CHECK  
RETURN  
1
2
While stopped  
STATUS  
TOP WINDOW  
1
Press [TOP WINDOW].  
Use the joystick [  
“PLAY LIST” and press [ENTER].  
SKIP  
SLOW/SEARCH  
3,  
4
,
2,  
1] to select  
STOP  
PAUSE  
PLAY  
∫, STOP  
1
4
2
5
8
0
3
6
Numbered  
buttons  
PLAY LIST  
7
9
VCR Plus+  
3 Use the joystick [3, 4] to select the  
play list that contains the scene you  
want to play and use the joystick [1].  
4 Use the joystick [3, 4] to select “Play  
Scenes” and press [ENTER].  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DVD, TV  
TOP WINDOW  
ENTER  
Play Scenes  
Edit Scenes  
PL Copy  
PL Erase  
Enter Title  
Properties  
1
2
5 Use the joystick [3, 4, 2, 1] to  
select the scene you want to play and  
press [ENTER].  
Acvdperations  
³The scene you  
select is  
played.  
PLAY LIST  
Play Scenes  
3 12/24 0:05 004  
Dinosaur  
ENTER  
001 00:00.19  
004  
002  
003  
---  
---  
---  
Select Page  
0
~
9
SELECT  
ENTER  
---  
---  
Prev.  
1 / 1  
Next  
RETURN  
3
4
ENTER  
ENTER  
º To stop scene play  
Press [º, STOP].  
The scene list appears.  
º To show scene 10 and later  
In step 5, use the joystick [3, 4, 2, 1] to select “Next 1” and  
press [ENTER].  
For your reference  
³You can fast-forward, rewind, pause, and slow-motion while play-  
ing scenes just as you can during normal play.  
³You can also select a page of scenes in step 5 by entering a 3-digit  
number with the numbered buttons (➡ page 8) and pressing  
[ENTER].  
ENTER  
ENTER  
TOP  
Editing play list scenes  
5
[RAM]  
Preparation  
ENTER  
ENTER  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you created play lists on.  
1
2
While stopped  
Press [TOP WINDOW].  
Use the joystick [  
select “PLAY LIST” and press [ENTER].  
3,  
4,  
2,  
1] to  
68  
PLAY LIST  
(Continued on next page)  
RQT6035  
Using play lists to edit programs  
TV  
CH  
VOL  
POWER  
TV/AV  
3 Use the joystick [3, 4] to select the  
play list you want to edit and use the  
joystick [1].  
OPEN/CLOSE  
POWER  
P
4 Use the joystick [3, 4] to select “Edit  
3·4·  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
Scenes” and press [ENTER].  
STATUS  
TOP WINDOW  
5·6·7·  
Play Scenes  
Edit Scenes  
PL Copy  
SKIP  
SLOW/SEARCH  
8·9  
STOP  
PAUSE  
PLAY  
RETURN  
PL Erase  
1
4
2
5
8
0
3
6
Enter Title  
Properties  
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
Adding scenes to a play list  
TIME SLIP CM SKIP  
SELECT  
LAST  
Preparation  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
Do steps 1 to 4 of “Editing play list scenes” (➡ page 68 and above).  
MARKER  
WRITE  
ACTION  
5 Use the joystick [2, 1] to select  
“Add” and press [ENTER].  
3 10/21 0:02 004 Dinosaur  
PLAY LIST  
Edit Scenes  
Add  
001 00:00.19  
004  
Move  
Re-edit  
Erase  
003  
---  
002  
---  
---  
Select Page  
3
4
0
~
9
SELECT  
ENTER  
---  
---  
ENTER  
ENTER  
Prev.  
1 / 1  
Next  
RETURN  
Avcdperations  
6 Use the joystick [3, 4, 2, 1] to  
select the scene after the position you  
want to add the scene and press  
[ENTER].  
ENTER  
ENTER  
7 Use search functions such as fast-  
forward and slow-motion to find the  
start point of the scene and press  
[ENTER].  
5
6
PLAY LIST No.3 Dinosaur  
PLAY LIST  
Add Scenes  
Scene No.  
ENTER  
ENTER  
1
PLAY  
1
Start  
End  
Next  
Exit  
3
0 : 00 . 05  
End  
SELECT  
Start  
ENTER  
RETURN  
0 : 00 . 05  
--:--.--  
ENTER  
ENTER  
8 Use search functions such as fast-  
forward and slow-motion to find the  
end point of the scene and press  
[ENTER].  
7·8  
9 Use the joystick [3, 4] to select  
ENTER  
“Exit” and press [ENTER].  
The screen from step 5 reappears.  
º To stop partway through  
9
Press [RETURN].  
º To add other scenes  
1 Use the joystick [3, 4] after step 8 to select “Next” and press  
[ENTER].  
ENTER  
ENTER  
69  
2 Repeat steps 7 and 8.  
RQT6035  
Using play lists to edit programs  
TV  
CH  
VOL  
POWER  
TV/AV  
Preparation  
Do steps 1 to 4 of “Editing play list scenes” (➡ pages 68 and 69).  
OPEN/CLOSE  
POWER  
P
Moving a scene  
5·6·7  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
5 Use the joystick [2, 1] to select  
TOP WINDOW  
“Move” and press [ENTER].  
SKIP  
SLOW/SEARCH  
3 10/21 0:02 004 Dinosaur  
PLAY LIST  
Edit Scenes  
Add  
001 00:00.19  
004  
Move  
Re-edit  
Erase  
STOP  
PAUSE  
PLAY  
003  
---  
002  
1
4
2
5
8
0
3
6
---  
---  
Select Page  
0
~
9
7
9
VCR Plus+  
100  
SELECT  
ENTER  
---  
---  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
Prev.  
1 / 1  
Next  
RETURN  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
6 Use the joystick [3, 4, 2, 1] to  
select the scene you want to move  
and press [ENTER].  
MARKER  
WRITE  
ACTION  
3 10/21 0:02 004 Dinosaur  
PLAY LIST  
Edit Scenes  
Add  
Move  
Re-edit  
Erase  
Selected  
scene  
003  
---  
001  
002 00:00.12  
004  
---  
Select Page  
0
~
9
5
7 Use the joystick [3, 4, 2, 1] to  
select the scene currently in the posi-  
tion to which you want to move the  
ENTER  
ENTER  
Acvdperations  
scene to and press [ENTER].  
The scene you  
selected in  
step 6 moves  
to the position  
in front of the  
scene  
3 10/21 0:02 004 Dinosaur  
PLAY LIST  
Edit Scenes  
Add  
Move  
Re-edit  
Erase  
6·7  
003  
---  
001  
002  
004 00:00.09  
---  
Select Page  
ENTER  
ENTER  
selected.  
0
~
9
º To move another scene  
Repeat steps 6 and 7.  
To re-edit a play list scene  
5 Use the joystick [2, 1] to select  
“Re-edit” and press [ENTER].  
3 10/21 0:02 004 Dinosaur  
PLAY LIST  
Edit Scenes  
Add  
001 00:00.19  
004  
Move  
Re-edit  
Erase  
003  
---  
002  
---  
Select Page  
0
~
9
6 Use the joystick [3, 4, 2, 1] to  
select the scene you want to re-edit  
and press [ENTER].  
3 10/21 0:02 004 Dinosaur  
PLAY LIST  
Edit Scenes  
Add  
Move Re-edit  
002 00:00.12  
---  
Erase  
Selected  
scene  
003  
---  
001  
004  
Select Page  
0
~
9
70  
(Continued on next page)  
RQT6035  
Using play lists to edit programs  
TV  
CH  
VOL  
POWER  
TV/AV  
7 Use search functions such as fast-  
forward and slow-motion to find the  
start point of the scene and press  
[ENTER].  
OPEN/CLOSE  
POWER  
P
7·8·9  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
PLAY LIST No.3 Dinosaur  
PLAY LIST  
Re-edit Scenes  
Scene No.  
TOP WINDOW  
5·6·7  
1
PLAY  
2
Prev.  
Start  
End  
SKIP  
SLOW/SEARCH  
RETURN  
STOP  
PAUSE  
PLAY  
Next  
Exit  
1
4
2
5
8
0
3
6
3
0 : 00 . 10  
SELECT  
ENTER  
Start  
End  
RETURN  
0 : 00 . 05  
0 : 00 . 10  
7
9
VCR Plus+  
100  
DVD  
CH  
8 Use search functions such as fast-  
forward and slow-motion to find the  
end point of the scene and press  
[ENTER].  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
9 Use the joystick [3, 4] to select  
“Exit” and press [ENTER].  
º To re-edit another scene  
1 Use the joystick [3, 4] after step 8 to select “Prev.” or “Next”  
and press [ENTER] until you find the scene you want to reedit.  
2 Repeat steps 7 and 8 to continue re-editing other scenes.  
7·8  
Note  
You cannot specify an end point before a start point or a start point  
after an end point.  
ENTER  
Avcdperations  
Erasing a scene from a play list  
Preparation  
Do steps 1 to 4 of “Editing play list scenes” (➡ pages 68 and 69).  
9
5 Use the joystick [2, 1] to select  
ENTER  
ENTER  
“Erase” and press [ENTER].  
3 10/21 0:02 004 Dinosaur  
PLAY LIST  
Edit Scenes  
Add  
001 00:00.19  
004  
Move  
Re-edit  
Erase  
003  
---  
002  
5
---  
Select Page  
0
~
9
ENTER  
ENTER  
6 Use the joystick [3, 4, 2, 1] to  
select the scene you want to erase  
and press [ENTER].  
7 Use the joystick [2, 1] to select  
6
7
“Yes” and press [ENTER].  
The selected  
scene is  
erased from  
the play list.  
ENTER  
ENTER  
3 10/21 0:02 004 Dinosaur  
PLAY LIST  
Edit Scenes  
Add  
Move  
Re-edit  
Erase  
Erase Scenes  
Erase this Scene?  
Yes  
No
SELECT  
RETURN  
ENTER  
ENTER  
ENTER  
Prev.  
2 / 3  
Next  
º To erase other scene  
Repeat steps 6 and 7.  
º To stop partway through  
In step 7, either select “No” and press [ENTER] or press [RETURN].  
For your reference  
The play list itself is erased if you erase all the scenes in it.  
71  
RQT6035  
Using play lists to edit programs  
TV  
CH  
VOL  
POWER  
TV/AV  
[RAM]  
Preparation  
OPEN/CLOSE  
POWER  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you created play lists on.  
P
2·3·4·5  
TOP  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
Copying play lists  
STATUS  
TOP WINDOW  
1
1
While stopped  
SKIP  
SLOW/SEARCH  
RETURN  
Press [TOP WINDOW].  
STOP  
PAUSE  
PLAY  
2 Use the joystick [3, 4, 2, 1] to se-  
lect “PLAY LIST” and press [ENTER].  
1
4
2
5
8
0
3
6
7
9
VCR Plus+  
PLAY LIST  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
3 Use the joystick [3, 4] to select the  
TIME SLIP CM SKIP  
SELECT  
play list you want to copy and then  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
use the joystick [1].  
MARKER  
WRITE  
ACTION  
DVD, TV  
4 Use the joystick [3, 4] to select  
“PL Copy” and press [ENTER].  
Play Scenes  
Edit Scenes  
PL Copy  
PL Erase  
TOP WINDOW  
1
2
Enter Title  
Properties  
5 Use the joystick [2, 1] to select  
Acvdperations  
“Copy” and press [ENTER].  
PLAY LIST  
ENTER  
ENTER  
001  
002  
003  
---  
004  
---  
Copy PLAY LIST  
Copy this PLAY LIST?  
3
4
5
Copy  
Cancel  
SELECT  
RETURN  
ENTER  
ENTER  
ENTER  
The copied play list appears at the bottom of the list.  
º To stop partway through  
Is step 5, either select “Cancel” and press [ENTER] or press  
[RETURN].  
ENTER  
ENTER  
TOP  
Erasing a play list  
1
While stopped  
Press [TOP WINDOW].  
ENTER  
ENTER  
2 Use the joystick [3, 4, 2, 1] to  
select “PLAY LIST” and press  
[ENTER].  
PLAY LIST  
3 Use the joystick [3, 4] to select the  
play list you want to erase and use the  
joystick [1].  
(Continued on next page)  
72  
RQT6035  
Using play lists to edit programs  
TV  
CH  
VOL  
POWER  
TV/AV  
4 Use the joystick [3, 4] to select  
“PL Erase” and press [ENTER].  
OPEN/CLOSE  
POWER  
Play Scenes  
Edit Scenes  
PL Copy  
P
4·5  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
PL Erase  
2·3·4  
1
SKIP  
SLOW/SEARCH  
Enter Title  
Properties  
RETURN  
STOP  
PAUSE  
PLAY  
5 Use the joystick [2, 1] to select  
1
4
2
5
8
0
3
6
“Erase” and press [ENTER].  
7
9
VCR Plus+  
PLAY LIST  
100  
001  
002  
003  
---  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
004  
---  
Erase PLAY LIST  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
Erase this PLAY LIST?  
MARKER  
WRITE  
ACTION  
DVD, TV  
Erase  
Cancel  
SELECT  
RETURN  
ENTER  
The play list is erased.  
º To stop partway through  
In step 5, either select “Cancel” and press [ENTER] or press  
[RETURN].  
4
5
TOP  
ENTER  
ENTER  
Titling play lists  
[RAM]  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you created play lists on.  
Avcdperations  
1
While stopped  
ENTER  
ENTER  
Press [TOP WINDOW].  
2 Use the joystick [3, 4, 2, 1] to  
select “PLAY LIST” and press  
[ENTER].  
TOP WINDOW  
1
2
PLAY LIST  
3 Use the joystick [3, 4] to select the  
play list you want to title and then  
move the joystick [1].  
ENTER  
ENTER  
4 Use the joystick [3, 4] to select  
“Enter Title” and press [ENTER].  
Play Scenes  
Edit Scenes  
PL Copy  
3
4
ENTER  
ENTER  
PL Erase  
Enter Title  
Properties  
5 Enter the title.  
Enter titles as with disc titling (➡ page 51).  
ENTER  
ENTER  
For your reference  
You can give play lists on DVD-RAM titles of up to 64 characters.  
Note  
Even if you have entered up to the maximum number of characters,  
characters you enter after the position marked with “4” in the title  
field and the two characters immediately prior to the mark will be  
replaced with “&” when displayed in the play list screen.  
73  
RQT6035  
Using play lists to edit programs  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Checking play list contents  
OPEN/CLOSE  
POWER  
[RAM]  
P
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Insert a disc you created play lists on.  
2·3·4  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
1
SKIP  
SLOW/SEARCH  
1
While stopped  
STOP  
PAUSE  
PLAY  
Press [TOP WINDOW].  
2 Use the joystick [3, 4, 2, 1] to se-  
1
4
2
5
8
0
3
6
lect “PLAY LIST” and press [ENTER].  
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
PLAY LIST  
TIME SLIP CM SKIP  
SELECT  
LAST  
3 Use the joystick [3, 4] to select the  
play list whose contents you want to  
check and then use the joystick [1].  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DVD, TV  
4 Use the joystick [3, 4] to select  
“Properties” and press [ENTER].  
Play Scenes  
Edit Scenes  
PL Copy  
TOP WINDOW  
1
2
PL Erase  
Enter Title  
Acvdperations  
Properties  
When you press [ENTER]  
3
PLAY LIST  
ENTER  
ENTER  
ENTER  
ENTER  
001  
004  
002  
003  
---  
---  
Properties  
Dinosaur  
No.  
3
Date 6/22/2001 FRI  
Scenes 004 Total 0:05.51  
4
RETURN  
ENTER  
ENTER  
ENTER  
You can confirm the play list title (if entered), play list number,  
date of creation, total number of scenes and total time.  
74  
RQT6035  
Expanding your home theater system  
Refer to the relevant pages for details.  
Enjoying CATV broadcasts  
Reference  
pages  
Reference  
pages  
What you want to do  
How to do it  
Settings  
Connect a cable TV box.  
76  
[A]  
Tune to channels correctly.  
16, 18, 91  
Enjoying CATV  
broadcasts  
Change the necessary  
settings on the equipment you  
have connected.  
—
Enjoying more powerful sound  
Digital connection  
Connect to an amplifier with  
built-in decoders.  
78  
[B]  
ACTION settings—Audio  
³Set PCM Down Conversion  
to On.  
³Set Dolby Digital and DTS  
to suit the equipment.  
86  
Enjoying 5.1-channel  
surround sound with  
Dolby Digital and DTS  
Change speaker settings on  
the amplifier.  
—
HomThater  
Analog connection  
Connect to an analog amplifier  
or system component.  
78  
[C]  
ACTION settings—Audio  
³Set PCM Down Conversion  
to Off.  
86  
Enjoying stereo or  
Dolby Pro Logic  
Digital connection  
Connect to a digital amplifier or  
system component.  
78  
[B]  
ACTION settings—Audio  
³Set PCM Down Conversion  
to On.  
86  
³Set Dolby Digital to PCM.  
³Set DTS to Off.  
º Other uses  
Record to digital recording equipment or cassette deck ([B] [C]  
➡ page 78)  
For your reference  
³The equipment connections described are examples.  
³Before connection, turn off all equipment and read the appropriate  
Record from a video cassette recorder (➡ pages 49 and 79 [D])  
operating instructions.  
Note  
Use connection [C] to enjoy discs recorded with a sampling  
frequency of 96 kHz. Sound will not be output if you use con-  
nection [B] and set PCM Down Conversion to “Off” due to  
copy protection.  
You can enjoy Dolby Digital in stereo with this unit alone.  
(This unit does not have a DTS decoder.)  
(Convert the signal to 48 kHz to enjoy this type of audio.)  
75  
RQT6035  
Expanding your home theater system  
Select channel 3 or 4 to see the output from the cable TV box or DSS receiver. Select the appropriate video input if your television has more than  
one.  
Connecting a cable TV box  
»A  
You need to have a cable TV box and a contract with a cable TV company to enjoy CATV broadcasts.  
³Consult your cable TV company for an appropriate cable TV box.  
Audio/Video cable  
Yellow (VIDEO)  
White (L)  
Red (R)  
º With a cable TV box  
Television (not included)  
AUDIO VIDEO  
IN  
IN  
VHF/UHF  
RF IN  
To household  
cable TV jack  
Audio/Video cable  
(not included)  
HmoThater  
Rear of this unit  
COMPONENT VIDEO OUT  
75 - coaxial cable  
R
R
R
R
AUDIO  
AUDIO  
AUDIO  
L
L
L
L
VIDEO S-VIDEO  
(not included)  
VIDEO  
Y
P
B
PR  
S-VIDEO  
RF-IN  
VIDEO S-VIDEO  
RF OUT RF IN  
VHF/UHF  
(L1)  
VIDEO  
AUDIO  
S-VIDEO  
RF-OUT  
(L3)  
VHF/UHF  
Cable TV box  
(not included)  
You cannot  
³view channels other than the one selected when recording.  
³do a timer recording unless the channel is first selected on the cable TV box.  
76  
RQT6035  
º With two cable boxes  
Television (not included)  
To household  
cable TV jack  
AUDIO VIDEO  
IN IN  
2-way splitter  
(not included)  
VHF/UHF  
RF IN  
OUT1 OUT2 IN  
Audio/Video cable (not included)  
IN  
OUT  
IN  
OUT  
Rear of this unit  
COMPONENT VIDEO OUT  
R
R
R
R
AUDIO  
AUDIO  
AUDIO  
L
L
L
L
VIDEO S-VIDEO  
Cable TV box  
(not included)  
VIDEO  
Y
PB  
PR  
S-VIDEO  
RF-IN  
VIDEO S-VIDEO  
IN2  
IN1  
(L1)  
VIDEO  
AUDIO  
S-VIDEO  
RF-OUT  
(L3)  
VHF/UHF  
Switch box  
(not included)  
Connect with 75 - coaxial cables (not included)  
You can  
You cannot  
³record and view both scrambled and unscrambled channels if ad-  
ditional equipment is added. This connection requires: two cable  
TV boxes, a switch box, and a 2-way splitter.  
³view channel other than the one selected when recording.  
³do a timer recording unless the channel is first selected on the  
cable TV box.  
HomThater  
Connecting a home satellite system (Dishnetwork/DSS)  
Note  
When a home satellite system (Dishnetwork/DSS) is connected,  
auto channel program and auto time set may not operate properly.  
Set the clock manually (➡ page 88).  
Television (not included)  
AUDIO VIDEO  
IN IN  
VHF/UHF  
RF IN  
Satellite TV  
Dishnetwork/  
DSS  
Audio/Video cable (not included)  
Rear of this unit  
COMPONENT VIDEO OUT  
75 - coaxial cable  
R
R
R
R
AUDIO  
AUDIO  
AUDIO  
L
L
L
L
VIDEO S-VIDEO  
(not included)  
VIDEO  
Y
P
B
PR  
S-VIDEO  
RF-IN  
VIDEO S-VIDEO  
(L1)  
VIDEO  
AUDIO  
S-VIDEO  
RF-OUT  
DSS receiver  
(L3)  
VHF/UHF  
(not included)  
IN  
OUT  
You cannot  
³view channel other than the one selected when recording.  
³do a timer recording unless the channel is first selected on the DSS receiver.  
77  
RQT6035  
Expanding your home theater system  
Connecting to a digital  
amplifier or system  
component  
Connecting an analog  
amplifier or system component  
!?  
C
»
!?  
B
»
Audio cable  
Red (R)  
Rear of this unit  
White (L)  
Rear panel of this unit  
AC INT  
OPTICAL  
R
R
R
R
AUDIO  
AUDIO  
AUDIO  
L
L
L
L
VIDEO S-VIDEO  
DIGITAL AUDIO OUT  
(PCM/BITSTREAM)  
VIDEO  
S-VIDEO  
VIDEO S-VIDEO  
AC INT  
(L1)  
VIDEO  
OPTICAL  
AUDIO  
S-VIDEO  
(L3)  
Insert fully, with this side facing  
up. (Do not bend when  
connecting.)  
DIGITAL AUDIO OUT  
(PCM/BITSTREAM)  
Audio cable  
(not included)  
Optical digital audio cable  
(not included)  
To optical digital input  
Amplifier or  
system  
component (with  
or without  
decoders)  
(not included)  
HmoThater  
Audio input (L/R)  
Speakers  
(not included)  
Example:  
Six speakers  
2-channel analog amplifier or  
system component  
(not included)  
º To enjoy Dolby Pro Logic (➡ page 96)  
You will also need to connect center and surround speakers in addi-  
tion to the front speakers to enjoy surround sound. Read the instruc-  
tions for the equipment for connection details. Turn V.S.S. off. Dolby  
Pro Logic will not function correctly if V.S.S. is on.  
For your reference  
³Change the settings in the Audio ACTION menus (➡ page 83) to  
suit the digital equipment you have connected.  
If the equipment can decode Dolby Digital, set “Dolby Digital” to  
“Bitstream” (factory setting).  
If the equipment can decode DTS, set “DTS” to “Bitstream”.  
³The DTS decoder must be compatible with the signals recorded on  
DVD.  
You can record the digital signal directly onto digital recording  
equipment.  
The signals on DVDs will be converted to 48 kHz/16 bit linear  
PCM.  
When recording DVDs, ensure the following conditions are  
met.  
³There is no copy guard recorded on the disc.  
³The recording equipment can handle a sampling frequency  
of 48 kHz/16 bit.  
If you want to use the synchro recording feature on your digit-  
al recording equipment and you use connection [B] or [C] to  
record from CDs or video CDs, first pause at the point you  
want to record from, activate the synchro feature, then restart  
play on the unit.  
78  
RQT6035  
Connecting a video cassette recorder  
»D  
When connecting to the L2 input terminals on  
the front of the unit  
When connecting to the input terminals on  
the rear of the unit  
Audio/Video cable  
Audio/Video cable  
Yellow (VIDEO)  
Yellow (VIDEO)  
White (L)  
Red (R)  
White (L)  
Red (R)  
Rear panel of this unit  
COMPONENT VIDEO OUT  
R
R
R
R
AUDIO  
AUDIO  
AUDIO  
L
L
L
L
VIDEO S-VIDEO  
POWER  
/I  
VIDEO  
Y
P
B
PR  
S-VIDEO  
REC MODE  
CH  
REC  
VIDEO S-VIDEO  
(L1)  
VIDEO  
OPTICAL  
AUDIO  
S-VIDEO  
S-VIDEO IN VIDEO IN  
L/MONO–AUDIO IN–R  
(L3)  
DIGITAL AUDIO OUT  
(PCM/BITSTREAM)  
Audio/Video cable  
(not included)  
S video cable  
(not included)  
S video cable  
(not included)  
Audio/Video cable  
(not included)  
HomThater  
Other playback equipment  
Connect to the video and audio  
output terminals.  
Other playback equipment  
Connect to the video and audio output terminals.  
Note  
Note  
If the audio output of the other equipment is monaural, connect to  
L/MONO. (Both left and right channels are recorded when connect-  
ed through L/MONO.)  
If audio output on the other equipment is monaural, use a stereo-  
monaural conversion cable (not included).  
79  
RQT6035  
Expanding your home theater system  
When you can’t directly connect  
the antenna you disconnected from  
your television to the unit  
When you can’t directly connect  
the included 75 - coaxial cable to  
the television  
Check the type of antenna input on your television and make the  
appropriate connection.  
Use the connection that suits the type of terminal.  
º If it is a twin lead  
º If it is a screw & plug type terminal  
300–75 - transformer  
(not included)  
Television  
VHF/UHF band separator  
(not included)  
VHF  
from the antenna  
UHF  
To this unit’s  
RF IN terminal  
75 - coaxial cable  
(Flat)  
Twin lead  
300 - cable  
º If it is a screw type terminal  
º If there is a twin lead and a coaxial cable  
Television  
from the antenna  
75–300 - transformer  
(not included)  
VHF  
or  
UHF  
VHF/UHF band mixer  
(not included)  
(Flat)  
Twin lead  
300 - cable  
HmoThater  
º If it is a double screw type terminal  
(Round)  
75 - coaxial cable  
Television  
VHF/UHF band separator  
(not included)  
To this unit’s  
RF IN terminal  
VHF  
UHF  
º If there are two twin leads  
from the antenna  
º If it is a complex TV terminal  
300–75 - transformer  
(not included)  
(Flat)  
Television  
Twin lead  
300 - cable  
Split out  
ANT 1  
VHF/UHF band mixer  
(not included)  
To this unit’s  
RF IN terminal  
ANT 2  
³If your television has both post and plug-type VHF  
terminals, the post connection is recommended to  
minimize signal loss.  
³Connect to one of the ANT terminals and select the same  
antenna number on the television.  
80  
RQT6035  
Expanding your home theater system  
TV  
CH  
VOL  
POWER  
TV/AV  
Operating other Panasonic  
DVD equipment with  
the remote control  
OPEN/CLOSE  
POWER  
!?  
POWER  
Í
P
ENTER  
FRAME  
PROG / CHECK  
RETURN  
By changing the remote control code, you can operate other DVD  
recorders and players manufactured by Panasonic.  
STATUS  
TOP WINDOW  
Most of the DVD recorders and players manufactured by Panasonic  
use the same system for their remote controls, so if you operate  
them in the same place, the controls can be confused by the differ-  
ent pieces of equipment. Use the following procedure to change the  
remote control code to solve this problem.  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
1
4
2
5
8
0
3
6
Numbered  
buttons  
³Use “1”, the factory set code, under normal circumstances.  
7
9
Be sure to set the same remote control code on the main unit as you  
did for the remote control itself (➡ page 82, ACTION—Set Up—  
Remote Control Code).  
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
Preparation  
³Switch [DVD, TV] to “DVD”.  
³Change the code on the main unit.  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
DVD, TV  
Press [ê, POWER] and the numbered but-  
tons corresponding to the code you want  
to set, [1], [2], or [3], at the same time.  
Note  
³The following display appears on the unit’s display if its code and  
the remote control’s code are different. Change the remote con-  
trol’s code to suit the unit.  
1
2
3
POWER  
HomThater  
The unit’s remote control code  
³The display disappears after about 5 seconds.  
81  
RQT6035  
Changing the unit’s settings  
Summary of settings  
This chart shows the initial settings for this unit. See page 85 for details on menu operation.  
³Underlined items are the factory presets.  
Main menus  
Menus  
Options  
Set Up  
Off Timer  
³2 hr  
³6 hr  
³Off  
!?  
!?  
Select how long the unit remains on when it is not being used.  
Remote Control Code  
Change the remote control code so you can use other Panasonic  
DVD equipment at the same time.  
³Set Code 1 ³Set Code 2 ³Set Code 3  
Clock Settings  
³Auto Clock Setting (➡ page 87)  
The unit adjusts the clock automatically.  
³Manual Clock Setting (➡ page 88)  
You can adjust the clock.  
³Time Zone Adjust (➡ page 89)  
³j1  
³0  
³i1  
Adjust the time zone if it was not set correctly after auto clock setting.  
This appears only after auto clock setting is complete.  
Channel Settings  
³Antenna System (➡ page 90)  
³TV  
³CATV  
Select to suit the type of antenna you are using. Channels are set  
corresponding to the antenna system you select.  
³Auto Channel Setting (➡ page 91)  
The unit sets the channels automatically.  
³Preset Channel Caption  
³Manual Channel Caption (➡ page 92)  
Give captions to the channels.  
³VCR Plusr CH Setting (➡ page 19)  
Set the guide channels for use with VCR Plusi timer recording.  
Re-initialize Setting  
³Yes  
³No  
This returns all values in the ACTION menus, except for the clock,  
channels, ratings level, and display language, to the default settings.  
Disc  
[DVD-V]  
Audio (➡ page 84)  
Choose the preferred audio language.  
³English  
³Original  
³French  
³Other ¢¢¢¢  
³Spanish  
³French  
³Spanish  
Subtitle (➡ page 84)  
Choose the preferred subtitle language.  
³Automatic  
³Spanish  
³English  
³Other ¢¢¢¢  
Ilaetings  
Menus (➡ page 84)  
³English  
³French  
Choose the preferred language for disc menus.  
³Other ¢¢¢¢  
Ratings (➡ page 86)  
Set a ratings level to limit DVD-Video play.  
Setting ratings (When level 8 is selected)  
8 No Limit: All DVD-Video can be played.  
1 to 7: Prohibits play of DVD-Video with  
corresponding ratings recorded on  
them.  
0 Lock All: Prohibits play of all DVD-Video.  
Changing ratings  
(When level 0–7 is selected)  
³Unlock Recorder  
³Change Level  
³Change Password ³Temporary Unlock  
Video  
3-D Y/C Separation (➡ page 84)  
³On  
³Off  
Turn 3-D Y/C separation on or off.  
Hybrid VBR Resolution (➡ page 84)  
Switch between automatic and fixed hybrid VBR resolution when  
recording.  
³Automatic  
³Fixed  
Still Mode (➡ page 84)  
Select the type of picture shown when you pause play.  
³Automatic  
³Lighter  
³On  
³Field  
³Darker  
³Off  
³Frame  
Black Level Control (➡ page 84)  
Change the black level of the picture.  
Seamless Play (➡ page 84)  
Turn seamless play on or off on discs with play lists.  
82  
RQT6035  
Main menus  
Menus  
Options  
Audio  
Audio during Search [RAM] [DVD-R] [DVD-V] [VCD]  
³On  
³Off  
Choose whether to have sound during the first level of fast-forward.  
D. Range Compression [DVD-V] (Dolby Digital only)  
³On  
³Off  
Change the dynamic range for late night viewing.  
MTS Selection for DVD-R Disc (➡ page 35)  
Select whether to record the main or secondary audio type (SAP)  
to DVD-R.  
³Main  
³SAP  
!?  
PCM Down Conversion (➡ page 86)  
³On  
³Off  
Choose whether to convert 96-kHz LPCM signals to 48-kHz/16 bit.  
Dolby Digital (➡ page 86)  
³Bitstream  
³PCM  
Choose whether to output Dolby Digital bitstream signals for decoding on  
other equipment or to convert them to PCM signals for 2-channel output.  
DTS (➡ page 86)  
³Bitstream  
³Automatic  
³On  
³Off  
Choose whether to output DTS bitstream signals for decoding on other  
equipment or to not output signals at all.  
Display  
Status Messages  
Choose whether to show on-screen messages automatically  
or not.  
³Off  
!?  
Blue Background  
³Off  
!?  
Select “Off” if you do not want to have the unit show the  
blue background when reception is weak.  
Language of Display Message  
³English  
³Français  
Choose the preferred language for these menus and the on-screen  
messages.  
FL Display (➡ page 84)  
Changes the brightness of the unit’s display.  
³Bright  
³Dim  
!?  
³Dim during DVD/VCD Play  
³4:3 ³16:9  
TV Screen  
TV Aspect (➡ page 21)  
Choose the setting to suit your television.  
Ialetings  
!?  
4:3 TV Settings for DVD-Video (➡ page 84)  
³Pan&Scan ³Letterbox  
Select how video from DVD-Video is shown on a 4:3  
standard aspect television.  
!?  
4:3 TV Settings for DVD-RAM (➡ page 84)  
³4:3  
³Pan&Scan ³Letterbox  
Select how video from DVD-RAM is shown on a 4:3  
standard aspect television.  
!?  
83  
RQT6035  
Changing the unit’s settings  
Summary of settings  
º Disc—Audio, Subtitle and Menus [DVD-V]  
º Video—Black Level Control  
Lighter: when connected to a TV through the VIDEO OUT or S  
VIDEO OUT terminal.  
Original:  
The original language of each disc will be selected.  
Other ¢¢¢¢: Input a code number with the numbered buttons  
(➡ see below).  
Darker: when connected to a TV through the COMPONENT  
VIDEO OUT (Y/PB/PR) terminals.  
Automatic:  
If the language selected for “Audio” is not available,  
subtitles of that language will automatically appear  
if available on that disc.  
º Video—Seamless Play  
³Some discs are designed to start in a certain language despite any  
changes you make here.  
On: The scenes in play lists created with this unit are played seam-  
lessly. This may cause shifting of the points where scenes  
change. Some play lists cannot be played seamlessly.  
Off: The points where scenes in play lists are played accurately, but  
this may cause the picture to freeze for a moment when scenes  
change.  
º Video—3-D Y/C Separation  
On: Reduces noise for recording by separating the luminance (Y)  
and color (C) signals received from the television station.  
Off: Reduces the ghosting that occurs when recording fast moving  
images.  
º Display—FL Display  
Dim during DVD/VCD play: The unit’s display dims during play of  
discs with video recorded. (The TIME  
SLIP indicator is off while the display  
is dimmed.)  
º Video—Hybrid VBR Resolution  
Automatic: The unit automatically switches resolution rates during  
recording. The unit reduces block noise, which occurs  
during MPEG compression, by selecting the optimum  
rate.  
º TV Screen—4:3 TV Settings for DVD-Video  
Pan&Scan: Video recorded for a widescreen is played with the  
sides cut off if the pan & scan was specified by the  
producer of the disc. 16:9 software prohibited from be-  
ing shown in the pan and scan style will appear in the  
letterbox style (with black bands above and below the  
picture) despite the setting here.  
Fixed:  
The resolution rate is fixed during recording. This en-  
sures the resolution rate is not reduced.  
º Video—Still Mode  
Field: Less blurred field stills are shown. Select if jittering occurs  
when “Automatic” is selected.  
Frame: Sharper frame stills are shown. Select if small text or fine  
patterns cannot be seen clearly when “Automatic” is  
selected.  
Letterbox: Video recorded for a widescreen is played in the letter-  
box style.  
º TV Screen—4:3 TV Settings for DVD-RAM  
4:3:  
Programs played as recorded.  
Pan&Scan: Video recorded for a widescreen is played as pan &  
scan.  
Letterbox: Video recorded for a widescreen is played in the letter-  
box style.  
Ilaetings  
Language code list  
Abkhazian:  
Afar:  
Afrikaans:  
Albanian:  
Ameharic:  
Arabic:  
Armenian:  
Assamese:  
Aymara:  
Azerbaijani:  
Bashkir:  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
Chinese:  
Corsican:  
Croatian:  
Czech:  
Danish:  
Dutch:  
English:  
Esperanto:  
Estonian:  
Faroese:  
Fiji:  
Finnish:  
French:  
Frisian:  
Galician:  
Georgian:  
German:  
Greek:  
Greenlandic: 7576  
Guarani:  
Gujarati:  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
Hausa:  
Hebrew:  
Hindi:  
Hungarian:  
Icelandic:  
Indonesian:  
Interlingua:  
Irish:  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
Lithuanian:  
Macedonian:  
Malagasy:  
Malay:  
Malayalam:  
Maltese:  
Maori:  
Marathi:  
Moldavian:  
Mongolian:  
Nauru:  
Nepali:  
Norwegian:  
Oriya:  
Pashto, Pushto:  
Persian:  
Polish:  
Portuguese:  
Punjabi:  
Quechua:  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8083  
7065  
8076  
8084  
8065  
8185  
Romanian:  
Russian:  
Samoan:  
Sanskrit:  
Scots Gaelic:  
Serbian:  
Serbo-Croatian: 8372  
Shona:  
Sindhi:  
Singhalese:  
Slovak:  
Slovenian:  
Somali:  
Spanish:  
Sundanese:  
Swahili:  
Swedish:  
Tagalog:  
Tajik:  
8279  
8285  
8377  
8365  
7168  
8382  
Telugu:  
Thai:  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Tibetan:  
Tigrinya:  
Tonga:  
Turkish:  
Turkmen:  
Twi:  
8378  
8368  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
Italian:  
Ukrainian:  
Urdu:  
Japanese:  
Javanese:  
Kannada:  
Kashmiri:  
Kazakh:  
Kirghiz:  
Korean:  
Kurdish:  
Laotian:  
Latin:  
Uzbek:  
Vietnamese:  
Volapük:  
Welsh:  
Wolof:  
Xhosa:  
Yiddish:  
Yoruba:  
Zulu:  
Basque:  
Bengali; Bangla: 6678  
Bhutani:  
Bihari:  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
Breton:  
Bulgarian:  
Burmese:  
Byelorussian:  
Cambodian:  
Catalan:  
7178  
7185  
Latvian, Lettish: 7686  
Lingala: 7678  
Tamil:  
Tatar:  
84  
Rhaeto-Romance: 8277  
RQT6035  
Changing the unit’s settings  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Common procedures  
OPEN/CLOSE  
POWER  
P
Refer to the summary of settings table on page 82 and use the  
following procedure to change the settings if necessary.  
1·2·3·4  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
Preparation  
Switch [DVD, TV] to “DVD”.  
RETURN  
STATUS  
TOP WINDOW  
1
SKIP  
SLOW/SEARCH  
1
While stopped  
STOP  
PAUSE  
PLAY  
Press [ACTION] to show the menus.  
³You can also press [TOP WINDOW] and use the joystick  
[3, 4, 2, 1] to select “ACTION” and press [ENTER].  
1
4
2
5
8
0
3
6
1
7
9
VCR Plus+  
100  
DVD  
CH  
Set Up  
REC REC MODE CANCEL  
INPUT  
ACTION  
TIME SLIP CM SKIP  
SELECT  
Off Timer  
6 hr  
3
LAST  
Remote Control Code  
Clock Settings  
Set Code 1  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
2
ACTION  
Channel Settings  
DVD, TV  
SELECT  
1
TAB  
Re-initialize Setting  
ENTER RETURN  
1 Menus  
The Action menu is made up of six menus—Set Up, Disc,  
Video, Audio, Display, and TV Screen. Select the menu’s  
tab to display the items.  
2 Items  
A list of items in the menu you selected.  
3 Options  
1
ACTION  
This shows the current settings. The options are shown  
when you select an item.  
2 Use the joystick [2, 1] to select the  
menu’s tab.  
2
3 Use the joystick [3, 4] to select the  
item you want to change and press  
[ENTER].  
ENTER  
4 Use the joystick [3, 4] to select the  
Ialetings  
option and press [ENTER].  
3·4  
³Some options require different operations. Follow the on-  
screen instructions and the instructions described later.  
ENTER  
ENTER  
º To return to the previous screen  
Press [RETURN]. Even if you have changed an option, the change  
is not accepted unless you press [ENTER].  
º When you are finished  
Press [ACTION].  
For your reference  
The unit retains these settings in its memory until you change them,  
even if you turn it off.  
85  
RQT6035  
Changing the unit’s settings  
!?  
Entering a password  
Digital output  
You can limit play of DVDs unsuitable for some audiences. Play and  
changes to the settings are not possible unless you enter a  
password.  
Change these settings when you have connected equipment  
through this unit’s OPTICAL DIGITAL AUDIO OUT terminal.  
PCM Down Conversion  
When setting ratings  
Off (factory setting):  
The password screen is shown when you select levels 0 to 7.  
1. Input a 4-digit password with the numbered buttons.  
³If you enter a wrong number, press [CANCEL] to erase it before  
you press [ENTER].  
When you have used audio cables to connect the unit to other  
equipment (analog connection [C] ➡ page 78).  
On:  
When you have used an optical digital cable to connect the unit to  
other equipment (digital connection [B] ➡ page 78). Output is limited  
to 48 kHz/16 bit.  
ACTION  
Ratings  
Enter a 4 digit password,  
then press ENTER  
Output of audio with a sampling frequency of 96 kHz  
Audio is output as follows in accordance with the connections and  
settings you make.  
No.  
✱✱✱✱  
Password  
0
-
9
Connection  
[B]  
(digital)  
[C]  
(analog)  
RETURN  
Setting  
Off  
Do not forget your password.  
2. Press [ENTER].  
3. Press [ENTER].  
¤1  
No output  
Output as 96 kHz  
The password is entered and the unit is locked.  
On  
Converted and output  
as 48 kHz/16 bit  
Converted and output  
as 48 kHz  
Now, when you insert a DVD-Video that exceeds the ratings  
limit you set, a message appears on the television.  
Follow the on-screen instructions.  
¤1 96 kHz audio is output if the DVD is unprotected, but the connect-  
ed equipment must be able to handle such signals in order to play  
them.  
When changing ratings  
Dolby Digital  
The password screen is shown when you select “Ratings”.  
1. Input your 4-digit password with the numbered buttons and press  
[ENTER].  
Bitstream (Factory preset):  
When you have connected a unit with a built-in Dolby Digital  
decoder.  
PCM:  
ACTION  
Ratings  
When you have connected a unit that doesn’t have a built-in Dolby  
Digital decoder.  
¤2  
Unlock Recorder  
Change Password  
Change Level  
Ilaetings  
DTS  
SELECT  
Temporary Unlock  
Off (Factory preset):  
ENTER  
RETURN  
When you have connected a unit that doesn’t have a built-in DTS  
¤2  
decoder.  
Unlock Recorder: To unlock the unit and return the rating to 8  
Change Password: To change your password  
Change Level:  
Bitstream:  
When you have connected a unit with a built-in DTS decoder.  
To change the rating level  
Temporary Unlock: To temporarily unlock the unit (the unit  
locks again if you switch it to standby or  
open the disc tray)  
¤2 Set “Dolby Digital” to “PCM” and “DTS” to “Off” if the other equip-  
ment doesn’t have decoders. Incorrect settings can cause noise  
to be output which can be harmful to your ears and speakers, and  
audio will not be recorded properly to digital recording equipment.  
2. Select the item with the joystick [3, 4] and press [ENTER].  
Actual screens depend on the operation. Follow the on-screen  
instructions.  
86  
RQT6035  
Changing the unit’s settings  
TV  
CH  
VOL  
POWER  
TV/AV  
Preparation  
Switch [DVD, TV] to “DVD”.  
OPEN/CLOSE  
POWER  
Clock Settings  
P
!?  
TOP  
Auto Clock Setting  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
2·3·4·5  
RETURN  
1
While stopped  
STATUS  
TOP WINDOW  
Press [ACTION].  
SKIP  
SLOW/SEARCH  
The ACTION screen appears.  
STOP  
PAUSE  
PLAY  
2 Use the joystick [2, 1] to select the  
Set Up tab.  
1
4
2
5
8
0
3
6
3 Use the joystick [3, 4] to select  
7
9
“Clock Settings” and press [ENTER].  
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
Set Up  
ACTION  
TIME SLIP CM SKIP  
SELECT  
Off Timer  
6 hr  
LAST  
Remote Control Code  
Clock Settings  
Set Code 1  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
Channel Settings  
DVD, TV  
SELECT  
1
TAB  
Re-initialize Setting  
4
Use the joystick [  
Clock Setting” and press [ENTER].  
3,  
4] to select “Auto  
ACTION  
Clock Settings  
Auto Clock Setting  
1
ACTION  
Manual Clock Setting  
Time Zone Adjust  
Re-
SELECT  
When you press [ENTER]  
Auto Clock Setting  
Connect antenna cable and if you use a  
cable box, tune it to your local PBS CH  
then...  
2
ENTER  
Please push the ENTER key.  
If channel setting is complete, the “Auto Clock Setting” screen appears.  
If you have not yet set channels, the “Auto Channel/Clock Setting” screen appears.  
Ialetings  
3·4  
5 Press [ENTER].  
Auto clock setting (or auto channel and auto clock setting) starts. This  
can take some time, up to a few hours in some cases. The following  
screen appears when setting is complete.  
ENTER  
ENTER  
Auto Clock Setting  
Auto Clock Setting is complete.  
6/7/2001 12:15 AM  
DST.............. ON  
TIME ZONE..... CST  
5
ENTER  
³Check that the time was set correctly. If it was not, use manual clock  
setting (➡ page 88) or time zone adjust (➡ page 89) to correct it.  
³If you connect the unit through a cable TV box or DSS receiver  
(➡ page 76), tune to your local PBS station before starting auto clock  
setting. Use manual clock setting (➡ page 88) if this does not work.  
³If there is no local PBS channel in your area, then auto clock setting  
may not work correctly.  
In this case the time must be set manually (➡ page 88).  
Note  
³DST, Daylight Saving Time, shows the summertime setting (➡ page 88).  
³
TIME ZONE shows the time difference from Greenwich meantime (GMT) (  
➡
page 88).  
ESTlGMT j5, CSTlGMT j6, MSTlGMT j7, PSTlGMT j8,  
ASTlGMT j9, HSTlGMT j10.  
For other areas: xx hr  
When you change the time zone, the recording times for programs recorded before  
³
the time zone was changed also change to correspond to the new time zone.  
º To stop auto clock setting  
87  
Press [RETURN].  
RQT6035  
Changing the unit’s settings  
TV  
CH  
VOL  
POWER  
TV/AV  
Preparation  
Switch [DVD, TV] to “DVD”.  
OPEN/CLOSE  
POWER  
P
Clock Settings  
2·3·4·5·6  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
!?  
TOP  
Manual Clock Setting  
STATUS  
TOP WINDOW  
SKIP  
SLOW/SEARCH  
1 Press [ACTION].  
The ACTION screen appears.  
STOP  
PAUSE  
PLAY  
2 Use the joystick [2, 1] to select the  
1
4
2
5
8
0
3
6
Set Up tab.  
3 Use the joystick [3, 4] to select  
“Clock Settings” and press [ENTER].  
7
9
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
Set Up  
ACTION  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
V.S.S.  
AUDIO  
Off Timer  
6 hr  
MARKER  
Remote Control Code  
Clock Settings  
MARKER  
WRITE  
Set Code 1  
DVD  
TV  
ACTION  
DVD, TV  
1
Channel Settings  
SELECT  
TAB  
Re-initialize Setting  
4 Use the joystick [3, 4] to select  
“Manual Clock Setting” and press  
[ENTER].  
ACTION  
Set Up  
ACTION  
Clock Settings  
1
2
Auto Clock Setting  
Manual Clock Setting  
Time Zone Adjust  
SELECT  
ENTER RETURN  
5 Use the joystick [2, 1] to select the  
ENTER  
item you want to change and use the  
joystick [3, 4] to change the setting.  
The items change as follows:  
MONTH(-----)DAY(-----)YEAR(-----)HOUR  
^>TIME ZONE()DST()MINUTE<J  
Ilaetings  
Sep  
3·4  
AManual Clock Setting  
MINUTE  
MONTH DAY  
YEAR  
HOUR  
ENTER  
ENTER  
5
17  
2001 THU  
7
:
36 PM  
DST TIME ZONE  
OFF CST  
SELECT  
ENTER  
E
RETURN  
HOUR: 12-hour display  
5
DST (Daylight Saving Time): ON or OFF  
If you select “ON”, the clock is advanced one hour starting  
at 2 a.m. on the first Sunday in April and ending at 2 a.m.  
on the last Sunday in October.  
ENTER  
TIME ZONE:  
EST()CST()MST()PST()AST()HST  
(j5)  
(j6)  
(j7)  
(j8)  
(j9)  
^------------------------------------------------------------------------------J  
(j10)  
Repeat step 5 as necessary.  
6
6 Press [ENTER].  
The “Clock Settings” screen (➡ step 4) reappears and the  
clock starts.  
ENTER  
Note  
³When you change the time zone, the recording times for programs  
recorded before the time zone was changed also change to corre-  
spond to the new time zone.  
88  
RQT6035  
Changing the unit’s settings  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Time Zone Adjust  
OPEN/CLOSE  
POWER  
P
Adjust the time zone (j1 or i1) if it was not set correctly with auto  
clock setting.  
You cannot change this setting if you set the clock manually.  
2·3·4·5  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
1 Press [ACTION].  
The ACTION screen appears.  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
2 Use the joystick [2, 1] to select the  
Set Up tab.  
1
4
2
5
8
0
3
6
3 Use the joystick [3, 4] to select  
7
9
“Clock Settings” and press [ENTER].  
VCR Plus+  
100  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
Set Up  
ACTION  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
6 hr  
Off Timer  
ACTION  
Remote Control Code  
Clock Settings  
Set Code 1  
1
Channel Settings  
SELECT  
TAB  
Re-initialize Setting  
4 Use the joystick [3, 4] to select  
“Time Zone Adjust” and press  
[ENTER].  
ACTION  
1
2
Set Up  
ACTION  
Clock Settings  
Auto Clock Setting  
Manual Clock Setting  
Time Zone Adjust  
SELECT  
ENTER  
ENTER RETURN  
When you press [ENTER]  
ACTION  
Time Zone Adjust  
Ialetings  
-1  
3·4·5  
0
+1  
SELECT  
ENTER  
ENTER  
ENTER RETURN  
5 Use the joystick [3, 4] to select  
“s1”, “0”, or “r1” and press  
[ENTER].  
The “Clock Settings” screen (➡ step 4) reappears.  
89  
RQT6035  
Changing the unit’s settings  
TV  
CH  
VOL  
POWER  
TV/AV  
Preparation  
Switch [DVD, TV] to “DVD”.  
OPEN/CLOSE  
POWER  
P
Channel Settings  
2·3·4·5  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
TOP  
Antenna System  
SKIP  
SLOW/SEARCH  
The following settings must be reset when you change the antenna  
system.  
STOP  
PAUSE  
PLAY  
VCR Plusi guide channel settings (➡ page 19)  
Auto channel setting (➡ page 91)  
Channel captions (➡ page 92)  
1
4
2
5
8
0
3
6
7
9
VCR Plus+  
100  
1 Press [ACTION].  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
The ACTION screen appears.  
TIME SLIP CM SKIP  
SELECT  
2 Use the joystick [2, 1] to select the  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
Set Up tab.  
ACTION  
DVD, TV  
1
3 Use the joystick [3, 4] to select  
“Channel  
[ENTER].  
Settings”  
and  
press  
Set Up  
ACTION  
ACTION  
Off Timer  
6 hr  
1
2
Remote Control Code  
Clock Settings  
Set Code 1  
Channel Settings  
SELECT  
TAB  
Re-initialize Setting  
ENTER RETURN  
4 Use the joystick [3, 4] to select  
“Antenna  
[ENTER].  
System”  
and  
press  
ENTER  
Channel Settings  
ACTION  
Ilaetings  
Antenna System  
Auto Channel Setting  
Channel Caption  
CATV  
3·4·5  
Preset Channel Caption  
SELECT  
Manual Channel Caption  
VCR Plus+ CH Setting  
ENTER RETURN  
ENTER  
ENTER  
5 Use the joystick [3, 4] to select “TV”  
or “CATV” and press [ENTER].  
TV:  
TV broadcast (2CH–69CH)  
CATV: CATV broadcast (1CH–125CH)  
Set Up  
ACTION  
Antenna System  
TV  
CATV  
SELECT  
ENTER RETURN  
The screen shown in step 4 reappears.  
90  
RQT6035  
Changing the unit’s settings  
TV  
CH  
VOL  
POWER  
TV/AV  
TOP  
Auto Channel Setting  
OPEN/CLOSE  
POWER  
You can use the ACTION menus to start Auto Channel Setting if Plug-in Auto  
Tuning (➡ page 16) fails for some reason.  
P
1 Press [ACTION].  
The ACTION screen appears.  
2·3·4·5  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
2 Use the joystick [2, 1] to select the  
STATUS  
TOP WINDOW  
RETURN  
Set Up tab.  
SKIP  
SLOW/SEARCH  
3
Use the joystick [  
nel Settings” and press [ENTER].  
3
,
4] to select “Chan-  
STOP  
PAUSE  
PLAY  
1
4
2
5
8
0
3
6
Set Up  
ACTION  
Off Timer  
6 hr  
7
9
VCR Plus+  
Remote Control Code  
Clock Settings  
Set Code 1  
100  
DVD  
REC REC MODE CANCEL  
INPUT  
CH  
Channel Settings  
SELECT  
TIME SLIP CM SKIP  
SELECT  
TAB  
Re-initialize Setting  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
ENTER RETURN  
MARKER  
WRITE  
ACTION  
1
4
Use the joystick [  
Channel Setting” and press [ENTER].  
3
,
4] to select “Auto  
Check the antenna  
system. Automatic  
setting is performed  
based on the current  
antenna system.  
Channel Settings  
ACTION  
Antenna System  
Auto Channel Setting  
Channel Caption  
CATV  
Preset Channel Caption  
ACTION  
SELECT  
Manual Channel Caption  
1
2
VCR Plus+ CH Setting  
ENTER RETURN  
When you press [ENTER]  
Auto Channel Setting  
Connect antenna cable and if you use a  
cable box, tune it to your local PBS CH  
then. . .  
ENTER  
Please push the ENTER key.  
Ialetings  
If clock setting is complete, the “Auto Channel Setting” screen appears.  
If you have not yet set clock, the “Auto Channel/Clock Setting” screen appears.  
3·4  
5 Press [ENTER].  
Auto Channel Setting  
ENTER  
ENTER  
CH  
18  
Auto Channel Setting  
Proceeding. .  
5
ENTER  
When finished  
Auto Channel Setting  
CH  
125  
Auto Channel Setting  
Complete  
Auto channel setting (or auto channel and auto clock setting) starts. This takes  
a few minutes. When finished, the Complete screen or time display is shown.  
Press [ENTER].  
³The channels are set based on the currently selected antenna system.  
º To stop auto channel setting  
91  
Press [RETURN].  
RQT6035  
Changing the unit’s settings  
TV  
CH  
VOL  
POWER  
TV/AV  
Preparation  
Switch [DVD, TV] to “DVD”.  
OPEN/CLOSE  
POWER  
P
TOP  
Channel Settings  
2·3·4·5  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
Channel Caption  
SKIP  
SLOW/SEARCH  
You can give stations captions. You can use the Preset Captions, or  
manually enter new ones yourself.  
STOP  
PAUSE  
PLAY  
The captions you enter are displayed when the channel is displayed  
and in the direct navigator screen.  
1
4
2
5
8
0
3
6
7
9
1 Press [ACTION].  
VCR Plus+  
100  
The ACTION screen appears.  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
2 Use the joystick [2, 1] to select the  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
Set Up tab.  
MARKER  
WRITE  
ACTION  
DVD, TV  
3 Use the joystick [3, 4] to select  
1
“Channel  
Settings”  
and  
press  
[ENTER].  
Set Up  
ACTION  
Off Timer  
6 hr  
Remote Control Code  
Clock Settings  
Set Code 1  
ACTION  
1
Channel Settings  
SELECT  
TAB  
Re-initialize Setting  
ENTER RETURN  
4 Use the joystick [3, 4] to select  
“Preset Channel Caption” or “Manual  
Channel Caption” and press [ENTER].  
2
ENTER  
Channel Settings  
ACTION  
Antenna System  
Auto Channel Setting  
Channel Caption  
CATV  
Preset Channel Caption  
SELECT  
Manual Channel Caption  
Ilaetings  
3·4  
VCR Plus+ CH Setting  
ENTER RETURN  
5 [If\you\selected\“Preset\Channel\Caption”]  
ENTER  
ENTER  
Set Up  
A
Preset Caption  
Caption  
Channel Number  
---  
GL08  
5
---  
ABC  
1
SELECT  
ENTER  
---  
---  
PBS  
CBS  
ENTER  
ENTER  
RETURN  
1 Use the joystick [3, 4] to select  
the caption and then move the  
joystick [1].  
You can choose from the following captions.  
ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E,  
AMC, FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC,  
UPN, CTV, WB, TSN, DSC, GLOB  
(Continued on next page)  
92  
RQT6035  
Changing the unit’s settings  
TV  
CH  
VOL  
POWER  
TV/AV  
2 Use the joystick [3, 4] to select  
the channel corresponding to the  
caption and then move the joystick  
[2].  
OPEN/CLOSE  
POWER  
P
5·6  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
Set Up  
ACTION  
Preset Caption  
Caption  
Channel Number  
SKIP  
SLOW/SEARCH  
---  
CTV  
---  
WB  
STOP  
PAUSE  
PLAY  
---  
TSN  
SELECT  
ENTER  
1
4
2
5
8
0
3
6
---  
---  
DSC  
GL08  
RETURN  
7
9
VCR Plus+  
100  
³Channels are not displayed if they do not contain a  
station or if captions have been added manually.  
Repeat steps 1 and 2 as necessary.  
DVD  
CH  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
5 [If\you\selected\“Manual\Channel\Caption”]  
MARKER  
WRITE  
ACTION  
Set Up  
A
Manual Caption  
Caption  
ChannelNumber
----  
124  
----  
8
SELECT  
ENTER  
----  
----  
10  
12  
RETURN  
5
6
1·2  
1 Use the joystick [3, 4] to select  
the channel and then move the  
joystick [1].  
ENTER  
ENTER  
ENTER  
³Channels are not displayed if they do not contain a  
station or if preset captions have been added.  
2 Use the joystick [3, 4] to select  
3
the first character and then move  
the joystick [1].  
You can choose from the following characters:  
A–Z, 0–9, -, &, !, /, (space)  
Repeat this step to enter the other characters.  
Ialetings  
Set Up  
ACTION  
Manual Caption  
Caption  
ChannelNumber
ENTER  
8
----  
10  
A A A A  
SELECT  
ENTER  
12  
23  
----  
----  
RETURN  
3 Press [2] to return to the Channel  
Number column when you are  
finished.  
Repeat steps 1, 2, and 3 as necessary.  
6 Press [ENTER].  
The screen shown in step 4 reappears.  
For your reference  
In step 5-1, the screen scrolls a page at a time if you hold the joy-  
stick up or down before pressing [ENTER].  
93  
RQT6035  
!?  
On-screen displays  
TV  
CH  
VOL  
POWER  
TV/AV  
Changing the information  
displayed  
OPEN/CLOSE  
A
»
POWER  
P
Displays appear on the television when you operate the unit to let  
you know what operation was performed and what condition the unit  
is in.  
³You can change the setting in the ACTION menu so these displays  
do not appear automatically (➡ page 83, Display—Status  
Messages).  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
TOP WINDOW  
STATUS  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
Remote control only  
1
4
2
5
8
0
3
6
Preparation  
Switch [DVD, TV] to “DVD”.  
7
9
VCR Plus+  
100  
DVD  
CH  
Press [STATUS] to change the information  
REC REC MODE CANCEL  
INPUT  
TIME SLIP CM SKIP  
SELECT  
displayed.  
LAST  
The display changes each time you press the button.  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
For example, DVD-RAM  
MARKER  
WRITE  
ACTION  
DVD-RAM  
DVD, TV  
REC  
PLAY  
L R  
Remain  
0 :15 FR  
DVD-RAM  
REC  
PLAY  
L R  
6/8 10 : 15 PM  
A
B
PRG4 1:12.12 FR  
PRG2 0:00.04 SP  
STATUS  
No display  
B
»
Display examples  
1 Available recording time and recording mode  
2 The current date and time  
3 Recording information  
1
Shows the program number, elapsed time, and recording mode.  
4 Play information  
Shows the program number, elapsed time, and recording mode.  
5 Play position  
6 Program being played (green)  
7 Program being recorded (red)  
8 Available time on disc  
Remain  
0 :15 FR  
DVD-RAM  
REC  
PLAY  
L R  
2
3
4
6/8 10 : 15 PM  
9
PRG4 1:12.12 FR  
PRG2 0:00.04 SP  
:
;
5
6
7 8  
9 Current media  
: Current recording or play status/input channel and caption  
(if entered)  
Rrfnce  
Shows the current state of the unit or input channel and caption  
(if entered).  
REC:  
Recording  
PAUSE: Recording paused  
PLAY:  
;:  
Playing  
Playing paused  
6:  
5:  
D:  
Rewinding (5 speeds)  
Fast forwarding (5 speeds)  
Slow-motion (5 speeds)  
Reverse slow-motion (5 speeds)  
E:  
; Audio type (➡ page 34)  
Shows the selected audio type.  
³During reception  
Stereo: Stereo is selected  
Mono: Monaural is selected  
SAP:  
Secondary audio program is selected  
(“(((” appears when the type you have selected is actually being  
received.)  
³During play  
LR, R, L:  
a stereo program is recorded  
MAIN, SAP: an MTS program is recorded  
94  
RQT6035  
Specifications  
Power supply:  
Power consumption:  
Recording system:  
AC 120 V, 60 Hz  
35 W  
DVD video recording standards  
(DVD-RAM),  
Audio system  
Recording system:  
Input:  
Dolby Digital  
LINE (pin jack)  
Reference input: 309 mVrms  
FS: 2 Vrms (1 kHz, 0 dB)  
Input impedance: 47 k-  
LINE (pin jack)  
Reference output: 309 mVrms  
FS: 2 Vrms (1 kHz, 0 dB)  
Output impedance: 1 k-  
(Load impedance: 10 k-)  
DVD video standards (DVD-R)  
System with 1 lens, 2 integration units  
(662 nm wavelength for DVDs,  
790 nm wavelength for CDs)  
12 cm 4.7 GB DVD-RAM discs  
12 cm 9.4 GB DVD-RAM discs  
8 cm 2.8 GB DVD-RAM discs  
12 cm 4.7 GB DVD-R discs  
(for General Ver. 2.0)  
Optical pick-up:  
Output:  
Recordable discs:  
Number of channels: Recording: 2 channels  
Playback: 2 channels  
Recording time:  
Discs played:  
Max. 6 hours (using 4.7 GB disc)  
XP: 60 minutes  
SP: 120 minutes  
LP: 240 minutes  
EP: 360 minutes  
12 cm 4.7 GB DVD-RAM discs  
12 cm 9.4 GB DVD-RAM discs  
8 cm 2.8 GB DVD-RAM discs  
12 cm 4.7 GB DVD-R discs  
(for General Ver. 2.0)  
Other input/output  
connectors:  
Dimensions:  
Digital audio optical output connector  
Approx. 430 (W)k120 (H)k351 (D) mm  
[Approx. 1615/16q (W)k43/4q (H)k  
137/8q (D)]  
(excluding protrusions)  
Approx. 5.6 kg (12.36 lbs)  
Mass:  
Operating  
temperature range:  
Operating  
5 oC–40 oC (41 oF–104 oF)  
DVD-VIDEO discs  
CD-Audio discs (CD-DA)  
Video CD discs  
humidity range:  
Clock unit:  
10 %–80 % RH (no condensation)  
Quartz-controlled 12-hour digital display  
CD-R/CD-RW discs  
(CD-DA, Video CD formatted discs)  
LASER Specification  
Class I LASER Product  
Video system  
TV system:  
Recording system:  
Input:  
NTSC system, 525 lines, 60 fields  
MPEG2 (Hybrid VBR)  
LINE (pin jack), 1.0 Vp-p; 75 -  
S connector Y: 1.0 Vp-p; 75 -  
C: 0.286 Vp-p; 75 -  
LINE (pin jack), 1.0 Vp-p; 75 -  
S connector Y: 1.0 Vp-p; 75 -  
C: 0.286 Vp-p; 75 -  
Wave length:  
Laser power:  
775–815 nm 655–666 nm  
No hazardous radiation is emitted with  
the safety protection.  
Power consumption in standby mode: approx. 5 W  
Note  
Specifications are subject to change without notice.  
Mass and dimensions are approximate.  
Output:  
Component video  
output 525i:  
Y: 1.0 Vp-p; 75 -  
PB: 0.7 Vp-p; 75 -  
PR: 0.7 Vp-p; 75 -  
Antenna reception  
input:  
TV Channel: 2ch–69ch, 75 -  
CATV Channel: 1ch–125ch, 75 -  
Rfrnce  
95  
RQT6035  
Glossary  
Bitstream  
Dolby Pro Logic  
This is the compressed form of digital signals. A decoder decodes  
these signals into 5.1 surround and multi-channel signals.  
A surround system where a 4-channel audio track is recorded as  
2 channels and then is restored to 4 channels for play. The surround  
channel is monaural.  
Channel (when referring to DVD)  
Sound is divided into channels based on the sound’s role.  
For example, 5.1 channel  
³Front speakers—1 left channel and 1 right channel  
³Center speaker—1 channel  
³Surround speakers—1 left channel and 1 right channel  
³Subwoofer—1 channelk0.1 (the ratio of bass to the total amount  
of sound output)  
DTS Digital Surround  
This surround system is used in many movie theaters around the  
world. The separation between channels is good and the compres-  
sion ratio is low, so realistic sound effects are possible.  
DTS soundtracks are produced with the assumption that all chan-  
nels will be used.  
Examples as shown in the on-screen menus  
3/2 .1ch  
Dynamic range  
Dynamic range is the difference between the lowest level of sound  
that can be heard above the noise of the equipment and the highest  
level of sound before distortion occurs.  
.1: Subwoofer signal  
(not displayed if there is no subwoofer signal)  
Finalize  
0: No surround  
1: Mono surround  
This process allows DVD-R to be played on compatible equipment.  
2: Stereo surround (left/right)  
Frame and field  
Frames are the still pictures that go together to make a moving pic-  
ture. A frame is made up of two fields.  
1: Center  
2: Front leftiFront right  
3: Front leftiFront rightiCenter  
Frame  
Field  
Field  
+
=
Component video output (Y, PB, PR)  
The luminance (Y) and color difference (PB and PR) signals are sep-  
arated for output so colors are reproduced faithfully. The output form  
differs from that for 480P progressive output.  
³A frame still is made up of two alternating fields, so the picture may  
appear blurred, but overall quality is high.  
³A field still is not blurred, but it has only half the information of a  
frame still so picture quality is lower.  
Decoder  
A decoder restores the coded audio and video signals on DVDs to  
normal. This is called decoding.  
Linear PCM  
This is a form of signal that has been digitized without compressing  
it. CDs are recorded with 44.1 kHz/16 bit PCM, while DVDs use  
PCM between 48 kHz/16 bit and 96 kHz /24 bit, allowing reproduc-  
tion of greater quality sound.  
The linear PCM signals output from the DIGITAL AUDIO OUT,  
OPTICAL terminal are stereo (2 channel).  
Direct navigator  
This is a list of programs you have recorded. You can select pro-  
grams from the list to view. The list also shows the date and time of  
recording, the channel, and the titles of titled programs. The select-  
ed program is played in the background, making selection even  
simpler.  
Dolby Digital  
Rrfnce  
This is a method of coding digital signals developed by Dolby Labo-  
ratories. Apart from stereo (2-channel) audio, these signals can also  
be 5.1-channel audio. A large amount of audio information can be  
recorded on one disc using this method.  
96  
RQT6035  
Pan&Scan/Letterbox  
Sampling frequency  
In general, DVD-Video are produced with the intention that they be  
viewed on a widescreen television with an aspect ratio of 16:9. This  
means you can view most material with the intended aspect ratio on  
a widescreen television.  
This is the number of samples of sound taken per second during  
conversion to a digital signal. A high sampling frequency results in a  
sound close to the original when played back.  
Material with this ratio will not fit onto a standard television with an  
aspect ratio of 4:3. Two styles of picture, “Pan&Scan” and  
“Letterbox”, deal with this problem.  
S video output  
The color (C) and luminance (Y) signals are separated before being  
sent to the television, making for greater picture clarity.  
Pan&Scan: The sides are cut off so the picture fills the screen.  
Title/Chapter (DVD-Video)  
DVD-Video are divided up into large sections, titles, and smaller  
sections, chapters. The numbers allocated to these sections are  
called title numbers and chapter numbers.  
Letterbox: Black bands appear at the top and bottom of the pic-  
ture so the picture itself appears in an aspect ratio of  
16:9.  
Example  
Title 1  
Title 2  
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2  
Playback control (PBC)  
This is a method of playing video CDs. You can select parts to play  
by using menus recorded on the disc.  
Track (Video CD/CD)  
This is the smallest division on CD and Video CD, and usually  
equates to a single song.  
Play list  
This is a collection of scenes. It enables you to play these scenes in  
succession or to select specific ones to play.  
Example  
Track 1  
Track 2 Track 3 Track 4  
Track 5  
Program (PRG)  
The section between the point where recording is started and the  
point where it is stopped.  
Maintenance  
The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust.  
Observe the following points to ensure continued listening and viewing pleasure.  
To clean this unit, wipe with a soft, dry cloth.  
³Never use alcohol, paint thinner or benzine to clean this unit.  
³Before using chemically treated cloth, read the instructions that  
came with the cloth carefully.  
Dust and dirt may adhere to the unit’s lenses over time, possibly  
making it impossible to record or play discs.  
Use  
the  
recommended  
DVD-RAM/PD  
lens  
cleaner  
(LF-K123LCA1) every 1 to 4 months, depending on frequency of  
use and the operating environment.  
Read the lens cleaner’s instructions carefully before use.  
Rfrnce  
97  
RQT6035  
Disc handling  
Do not use irregularly shaped discs, such as heart-shaped.  
(These can damage the unit.)  
º Handling precautions  
³Do not write on the label side with a ball-point pen or other writing  
instrument.  
³Do not use cleaning sprays, benzine, thinner, static electricity pre-  
vention liquids or any other solvent.  
³Do not attach labels or stickers to discs. (Do not use discs with  
exposed adhesive from tape or left over peeled-off stickers.)  
³Do not use scratch-proof protectors or covers.  
³Do not use discs printed with label printers available on the  
market.  
º How to hold a disc  
Do not touch the recorded surface.  
³Do not use discs that are badly warped or cracked.  
!?  
º Do not place or store discs in the following  
places  
³Locations exposed to direct sunlight  
³Humid or dusty locations  
³Locations directly exposed to a heat vent or heating appliance  
º If there is dirt or condensation on the disc  
!?  
Moisture may condense on discs after they are brought inside from  
the cold.  
DVD-RAM and DVD-R  
Clean and dry only with the DVD-RAM/PD disc cleaner available as  
an optional accessory, part number LF-K200DCA1. Do not use  
cleaners or cloths for CDs to clean DVD-RAM and DVD-R.  
DVD-Video, Video CD, CD  
Wipe with a damp cloth and then wipe dry.  
Self-diagnosis  
The service numbers (“U” followed by two digits) and messages  
shown in the table appear.  
Reference pages are shown as black circled numbers  
³.  
Service number  
Possible solutions are indicated with “  
es in the operating instructions.  
” on the relative pag-  
!?  
Rrfnce  
Service  
Unit status  
number  
Solutions  
U11  
U14  
The disc is dirty or badly  
scratched.  
³Follow the instructions in “Disc handling” to clean the disc if it is dirty. ³  
³The disc cannot be played if it is scratched and this display doesn’t disappear. ³  
You have inserted a disc  
the unit cannot play or  
record on.  
³Insert a disc the unit can play or record on. 6  
The unit is hot.  
³The unit switches to standby automatically for safety reasons and you cannot operate it.  
Wait for about 30 minutes for the service number to disappear.  
³Select a position with good ventilation when installing the unit.  
³Do not block the cooling fan on the rear of the unit.  
!?  
U99  
The unit fails to operate  
properly.  
³Press [ê/I, POWER] to switch the unit to standby. Now press [ê/I, POWER] again to turn  
the unit on.  
CHK  
REMOTE  
The remote control and  
main unit are using  
different codes.  
³Change the code on the remote control or main unit. ¢, £  
98  
RQT6035  
Error messages  
Reference pages are shown as black circled numbers F.  
!?  
Possible solutions are indicated with “  
” on the relative pages in the operating instructions.  
Error messages  
Causes and solutions  
No Disc.  
³You haven’t inserted a disc.  
Correctly insert a disc that this unit can use. F J  
³The disc is upside down.  
If it is a single-sided disc, insert it so the label is facing up. F J  
This is non-recordable disc.  
³The unit cannot record on the disc you inserted. The unit cannot record onto finalized  
DVD-R, DVD-Video, CDs, or video CDs.  
This disc is not formatted properly.  
Please format the disc in ‘DISC  
SETTING’ to record.  
Insert a DVD-RAM or unfinalized DVD-R. 6 7  
³You inserted an unformatted DVD-RAM.  
Format the disc with this unit. f  
This disc cannot be read.  
³You inserted an incompatible disc. Insert a compatible disc. 6  
Please check write protect tab on the  
³The write-protect tab on the cartridge is set to  
PROTECT.  
Use a ballpoint pen or similar to release the write  
protection.  
disc.  
!?  
PROTECT  
Contents of this disc are protected.  
Cannot finish recording completely.  
³The program is write-protected.  
Release the protection with the direct navigator. m  
³The disc is write-protected.  
Release the protection with the Disc Protection of DISC SETTING. e  
³The program was copy-guarded.  
³The disc is full.  
³Recording was not completed for some other reason.  
Cannot record on the disc.  
Please set clock.  
³The disc is scratched. Use another disc.  
³The disc is dirty. Clean the disc as described in these operating instructions. ³  
³The clock is not set correctly. Reset the clock using “Manual Clock Setting”. ©  
This disc may not be played in your  
region.  
³You tried to play a disc with a region number different from this unit’s region number. This  
unit can only play discs with the region numbers compatible with this unit (1, All, or  
including the number 1). 6  
Your selection exceeds the recorder’s  
³A ratings level has been set for DVD-Video with this unit.  
rating limit.  
Temporarily unlock the unit with “Ratings” in the Disc ACTION menu. §  
Rfrnce  
99  
RQT6035  
Troubleshooting guide  
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do  
not solve the problem:  
In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com, or  
web site (http://www.panasonic.com).  
In Canada, contact Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, web site (www. panasonic.ca), or an authorized  
Servicentre closest to you.  
Reference pages are shown as black circled numbers >.  
Possible solutions are indicated with “  
” on the relative pages in the operating instructions.  
!?  
Power  
No power.  
³Insert the AC power supply cord securely into the household AC outlet. >  
The unit is on but cannot be  
operated.  
³The unit is hot (“U14” appears on the display). ³  
Wait for “U14” to disappear.  
³One of the unit’s safety devices may have activated.  
Reset the unit as follows:  
1. Press [ê/I, POWER] on the main unit to switch the unit to standby.  
If the unit doesn’t switch to standby, press and hold [ê/I, POWER] for about 10 seconds. The  
unit is forcibly switched to standby.  
Alternatively, disconnect the AC power supply cord, wait one minute, then reconnect it.  
2. Press [ê/I, POWER] to turn the unit on.  
The unit switches to standby  
automatically.  
³This is a power saving feature. You can turn it off if you would prefer (ACTION—Set Up—Off  
Timer—Off). £  
Press [ê/I, POWER] to turn the unit on.  
³One of the unit’s safety devices may have activated.  
Press [ê/I, POWER] to turn the unit on.  
Picture  
The images from this unit do not  
appear on the television.  
³Make sure the television’s input setting (e.g., VIDEO 1) is correct.  
Television reception worsens  
after connecting the unit.  
³This can occur because the signals are being divided between the unit and the television.  
It can be solved by using a signal booster, available from audio-visual suppliers.  
Consult your dealer if reception does not improve.  
Screen size is wrong.  
The picture flickers.  
³Check the settings on your television.  
³Check the settings for “TV Aspect”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for  
DVD-RAM” in the TV Screen ACTION menus. E, ¤  
³Adjust the television’s vertical hold. Read the television’s operating instructions or consult your  
dealer.  
On-screen messages do not  
appear.  
³Go to Display in the ACTION menus and select “Automatic” for “Status Messages”. ¤  
³Press [STATUS] to show the on-screen messages constantly. ¯  
Rrfnce  
The blue background does not  
appear.  
³Go to Display in the ACTION menus and select “On” for “Blue Background”. ¤  
Sound  
No sound.  
³Check the connections. >, ~  
Low volume.  
Distorted sound.  
Check the input mode on the amplifier if you have connected one.  
³Turn V.S.S. off if it causes distortion. W  
Cannot hear the desired audio  
type.  
³Press [AUDIO] on the remote control to select the desired audio type. R  
[DVD-R]  
³Go to Audio in the ACTION menus and choose the correct setting with “MTS Selection for DVD-R  
Disc”. ¤  
Cannot switch audio during  
stereo or MTS broadcasts.  
³You have used digital connection. Connect to other equipment using audio cables (analog  
connection). >, ~  
³You cannot change the audio type when using DVD-R. S  
100  
RQT6035  
Play  
Play fails to start even when  
[1, PLAY] is pressed.  
Play starts but then stops  
immediately.  
³Insert the disc correctly with the label facing up. F  
³This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Video, Video CD, and CD. 6  
³The disc is dirty. Clean it. ³  
³The disc may be badly scratched. ³  
“U11”, “NO DISC”, or “NO PLAY”  
appears on the unit’s display.  
³You inserted a blank DVD-RAM or DVD-R.  
³Condensation has formed: Wait 1 to 2 hours for it to evaporate.  
No response when buttons  
pressed.  
³Some operations may be prohibited by the disc.  
³If the unit is not operating at all, press [ê/I, POWER] to switch the unit to standby, then press  
[ê/I, POWER] again to turn the unit on. The unit may not be operating correctly due to lightning,  
static electricity, or some other external factor.  
A title or chapter doesn’t play  
when it is selected.  
³Some titles and chapters on DVD-Video are not played when you have changed the ratings level.  
§
Picture distorted during search.  
There is ghosting.  
³Some distortion is normal.  
³Change the settings for “3D NR”, “Block NR”, and “Mosquito NR” to “0” or turn MPEG DNR off  
with the on-screen menu icons. Z  
Alternative soundtrack and  
subtitles cannot be selected.  
³The languages are not recorded on the disc.  
³You may have to use the disc’s menus to select languages. G  
No subtitles.  
³Subtitles are not recorded on the disc.  
³Turn the subtitles on. Y  
Angle cannot be changed.  
³This function depends on software availability. Angles can only be changed during scenes where  
different angles are recorded (“  
” appears on the display).  
You have forgotten your ratings  
password.  
³Return the ratings setting to “8”.  
While the disc tray is open, press and hold [:] and [9] on the main unit at the same time for  
5 or more seconds.  
Displays  
The display is dim.  
³Go to Display in the ACTION menus and change the display’s brightness with “FL Display”. ¤  
“12:00” is flashing on the unit’s  
display.  
³The clock is not set.  
Go to Set Up in the ACTION menus and set the clock with “Clock Settings”. ¨  
Remote control  
The remote control doesn’t work.  
³[DVD, TV] is not switched to “DVD”.  
Switch to “DVD” when operating this unit. 8, <  
³The remote control and main unit are using different codes.  
Change the code on the remote control or main unit. ¢, £  
³The batteries are depleted. Replace them with new ones. <  
³Point the remote control at the remote control sensor on the main unit. <  
³Remove obstacles from between the remote control and main unit.  
Rfrnce  
Cannot operate the television.  
³Change manufacturer code. Some televisions cannot be operated even if you change the code.  
=
³[DVD, TV] is not switched to “TV”.  
Switch to “TV” when operating the television. 8  
101  
RQT6035  
Troubleshooting guide  
Recording and timer recording  
Cannot record.  
³You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the unit  
can record onto. 6  
³The disc is unformatted.  
Format the disc so this unit can record on it. f  
³The disc is protected with the write-protect tab.  
Use a ballpoint pen or similar to release the write protection. ´  
³The disc is protected with DISC SETTING.  
Release the disc protection. e  
³The disc is full or nearly full.  
Erase unneeded programs or use another disc. j  
VCR Plusr programming does  
³The guide channels are incorrect.  
not work properly.  
Go to Set Up in the ACTION menus and correct the guide channels with “VCR Plusi CH  
Setting”. C  
³The clock is wrong.  
Go to Set Up in the ACTION menus and correct the clock with “Clock Settings”. ¨  
Timer recording does not work  
properly.  
³The timer program is incorrect.  
Correct the program. ], _  
³The unit is not on timer recording standby. (“ç” on the unit’s display is not on.)  
Press [ê/I, POWER] to turn “ç” on. \, _  
³Different timer program times overlap. `  
³The clock is wrong.  
Go to Set Up in the ACTION menus and correct the clock with “Clock Settings”. ¨  
The unit switches to standby  
while making a timer recording.  
³The disc runs out of space.  
Use a disc that has enough space to record the program.  
The timer program remains even  
after recording finishes.  
³The program remains if you select “DAILY” or “WEEKLY”. ], ^  
The program also remains if recording failed for some reason, but is cleared automatically at 4  
a.m. the day after tomorrow. `  
Timer recording does not stop  
³Press [ê/I, POWER] and then [º, STOP] within 5 seconds to turn “ç” off. Recording stops.  
even when [º, STOP] is pressed.  
The available recording time  
doesn’t increase even after  
³As this unit is unable to erase data written to DVD-RAM with a computer, the available recording  
time does not increase. The data will be erased if you reformat the disc. f  
erasing all recordings on the disc.  
If the disc is dirty, wipe with the DVD-RAM/PD disc cleaner (optional) before formatting. ³  
Discs make sounds as they rotate. This does not indicate a malfunction.  
Product Service  
Rrfnce  
1. Damage requiring service—The unit should be serviced by  
qualified service personnel if:  
4. Safety check—After repairs or service, ask the servicer to per-  
form safety checks to confirm that the unit is in proper working  
condition.  
(a) The AC power supply cord or AC adaptor has been dam-  
aged; or  
(b) Objects or liquids have gotten into the unit; or  
(c) The unit has been exposed to rain; or  
Product information  
(d) The unit does not operate normally or exhibits a marked  
change in performance; or  
For product information or assistance with product operation:  
(e) The unit has been dropped or the cabinet damaged.  
2. Servicing—Do not attempt to service the unit beyond that de-  
scribed in these operating instructions. Refer all other servicing  
to authorized servicing personnel.  
3. Replacement parts—When parts need replacing ensure the  
servicer uses parts specified by the manufacturer or parts that  
have the same characteristics as the original parts. Unauthor-  
ized substitutes may result in fire, electric shock, or other  
hazards.  
In the U.S.A., contact the Panasonic Customer Call Center at  
1-800-211-7262, or e-mail consumerproducts@panasonic.com,  
or web site (http://www.panasonic.com).  
In Canada, contact Panasonic Canada Inc. Customer Care  
Centre at 1-800-561-5505, web site (www.panasonic.ca), or an  
authorized Servicentre closest to you.  
102  
RQT6035  
For U.S.A.  
Panasonic Consumer Electronics  
Company, Division of Matsushita  
Electric Corporation of America  
One Panasonic Way Secaucus,  
New Jersey 07094  
Panasonic Sales Company, Division of Matsushita  
Electric of Puerto Rico, Inc  
Ave. 65 de Infanteria, Km. 9.5  
San Gabriel Industrial Park, Carolina, Puerto Rico 00985  
PANASONIC DVD RECORDER  
Limited Warranty  
Panasonic Consumer Electronics Company or Panasonic  
Sales Company (collectively referred to as “the Warrantor”)  
will repair this product and all included accessories with new  
or refurbished parts, free of charge in the USA or Puerto  
Rico, from the date of the original purchase in the event of a  
defect in materials or workmanship as follows:  
This warranty only covers failures due to defects in materials  
and workmanship which occur during normal use. The war-  
ranty does not cover damage which occurs in shipment, or  
failures which are caused by products not supplied by the  
warrantor, or failures which result from accident, misuse,  
abuse, neglect, mishandling, misapplication, alteration,  
modification, faulty installation, set-up adjustments, improp-  
er antenna, inadequate signal pickup, maladjustment of con-  
sumer controls, improper operation, power line surge, im-  
proper voltage supply, lightning damage, commercial use  
such as hotel, office, restaurant, or other business or rental  
use of the product, or service by anyone other than a DVD  
Recorder authorized repair facility, or damage that is attribut-  
able to acts of God.  
Parts—New or rebuilt parts in exchange for defective parts  
for one (1) year from the date of original purchase.  
Labor—Carry-in or mail-in service for one (1) year from the  
date of original purchase.  
Batteries—(if included) New rechargeable batteries in ex-  
change for defective rechargeable batteries for ten (10) days  
from the date of original purchase. Non-rechargeable batter-  
ies are not warranted.  
4.7 DVD-RAM Disc—(if included) New 4.7 DVD-RAM Disc  
in exchange for defective disc for ten (10) days from the date  
of original purchase.  
LIMITS AND EXCLUSIONS  
There are no express warranties except as listed above.  
THE WARRANTOR SHALL NOT BE LIABLE FOR INCI-  
DENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING,  
WITHOUT LIMITATION, DAMAGE TO DISCS) RESULTING  
FROM THE USE OF THIS PRODUCTS, OR ARISING OUT  
OF ANY BREACH OF THE WARRANTY. ALL EXPRESS  
AND IMPLIED WARRANTIES, INCLUDING THE WARRAN-  
TIES OF MERCHANTABILITY AND FITNESS FOR PAR-  
TICULAR PURPOSE, ARE LIMITED TO THE APPLICABLE  
WARRANTY PERIOD SET FORTH ABOVE  
Carry-in or mail-in service in the USA may be obtained dur-  
ing the warranty period by contacting a Panasonic Services  
Company (PASC) Factory Servicenter listed in the Service  
Directory. Or call toll free 1-800-211-PANA(7262) to locate  
an authorized PASC Servicenter. Carry-in or mail-in service  
in Puerto Rico can be obtained during the warranty period by  
calling the telephone number listed in the Servicenter  
Directory.  
This warranty is extended only to the original purchaser. A  
purchase receipt or other proof of date of original purchase  
will be required before warranty service is rendered.  
Some states do not allow the exclusion or limitation of inci-  
dental or consequential damages, or limitations on how long  
an implied warranty lasts, so the above exclusions or limita-  
tions may not apply to you.  
Rfrnce  
This warranty gives you specific legal rights and you may  
also have other rights which vary from state to state.  
If you have a problem with this product that is not han-  
dled to your satisfaction, then write to the Consumer Af-  
fairs Department at the Company address indicated  
above.  
103  
RQT6035  
For CANADA  
Panasonic Canada Inc.  
5770 Ambler Drive, Mississauga, Ontario L4W 2T3  
PANASONIC/TECHNICS PRODUCT—LIMITED WARRANTY  
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to  
remedy any such defect for a period as stated below from the date of original purchase.  
Panasonic DVD Recorder One (1) year, parts and labour  
LIMITATIONS AND EXCLUSIONS  
This warranty does not apply to products purchased outside Canada or to any product which has been improperly  
installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping,  
or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does  
it cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this  
warranty.  
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original  
purchase is required before warranty service is performed.  
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, EX-  
CLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUEN-  
TIAL DAMAGES.  
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages,  
or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable.  
WARRANTY SERVICE  
For product operation and information assistance, please contact your Dealer or our Customer Care Centre at:  
Telephone #: (905) 624-5505 Fax #: (905) 238-2360 Web: www.panasonic.ca  
For product repairs, please contact one of the following:  
³Your Dealer who will inform you of an authorized Servicentre nearest you.  
³Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca  
³A Panasonic Factory Servicentre listed below:  
Richmond, British Columbia  
Panasonic Canada Inc.  
12111 Riverside Way,  
Richmond, BC, V6W 1K8  
Tel: (604) 278-4211  
Calgary, Alberta  
Panasonic Canada Inc.  
6835-8th St. N. E.  
Calgary, AB T2E 7H7  
Tel: (403) 295-3955  
Fax: (403) 274-5493  
Mississauga, Ontario  
Panasonic Canada Inc.  
5770 Ambler Dr.  
Mississauga, ON L4W 2T3  
Tel: (905) 624-8447  
Fax: (905) 238-2418  
Lachine, Québec  
Panasonic Canada Inc.  
3075, rue Louis A. Amos  
Lachine, QC H8T 1C4  
Tel: (514) 633-8684  
Fax: (514) 633-8020  
Rrfnce  
Fax: (604) 278-5627  
CUSTOMER’S RECORD:  
Customer Name:  
Model Number:  
Date of Purchase:  
Dealer’s Name:  
Address:  
Serial Number:  
Phone Number:  
IF YOU SHIP THE PRODUCT TO A SERVICENTRE  
Carefully pack and send prepaid, adequately insured and preferably in the original carton.  
Include details of the defect claimed, and proof of date of original purchase.  
Ref: Audwar0600  
104  
RQT6035  
Servicenter List (ONLY FOR U.S.A.)  
For Product Information, Operating Assistance, Literature Request, Dealer Locations, and  
all Customer Service inquiries please contact:  
1-800-211-PANA (7262), Monday–Friday 9 am–9 pm; Saturday–Sunday 9 am–7 pm, EST.  
Web Site: http://www.panasonic.com  
You can purchase parts, accessories or  
locate your nearest servicenter by visiting  
our Web Site.  
Accessory Purchases:  
1-800-332-5368 (Customer Orders Only)  
Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032  
(6 am to 5 pm Monday–Friday; 6 am to 10:30 am Saturday; PST)  
(Visa, MasterCard, Discover Card, American Express, Check)  
Factory Servicenters Locations  
CALIFORNIA  
6550 Katella Avenue  
Cypress, CA 90630  
GEORGIA  
MINNESOTA  
TEXAS  
13615 Welch Road  
Suite 101  
8655 Roswell Road  
Suite 100  
Atlanta, GA 30350  
7850-12th Avenue South  
Airport Business Center  
Bloomington, MN 55425  
Farmers Branch  
TX 75244  
800 Dubuque Avenue  
S. San Francisco  
CA 94080  
ILLINOIS  
9060 Golf Road  
Niles, IL 60714  
OHIO  
2236 Waycross Road  
Civic Center Plaza  
Forest Park, OH 45240  
WASHINGTON  
20425-84th Avenue South  
Kent, WA 98032  
3878 Ruffin Road  
Suite A  
San Diego, CA 92123  
1703 North Randall Road  
Elgin, IL 60123  
(Pick-up/Drop-off only)  
PENNSYLVANIA  
2221 Cabot Blvd. West  
Suite B  
FLORIDA  
3700 North 29th Avenue  
Suite 102  
Hollywood, FL 33020  
MASSACHUSETTS  
60 Glacier Drive  
Suite G  
Langhorne, PA 19047  
Westwood, MA 02090  
HAWAII  
99-859 Iwaiwa Street  
Aiea, Hawaii 96701  
Phone (808) 488-1996  
Fax (808) 486-4369  
Rfrnce  
Service in Puerto Rico  
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/Factory Servicenter:  
Ave. 65 de Infanteria, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985  
Phone (787) 750-4300 Fax (787) 768-2910  
105  
RQT6035  
Guía de referencia rápida en español  
Conexiones de antena y televisor  
AUDIO VIDEO  
A la antena  
IN  
IN  
VHF/UHF  
RF IN  
TV por cable  
Antena exterior  
Antena interior  
(Rojo)(Blanco)(Amarillo)  
Televisor  
o
Cable coaxial  
de 75 -  
(suministrado)  
Cable de audio/vídeo  
(suministrado)  
Cable de antena  
desconectado del  
televisor  
Este aparato  
(Rojo)(Blanco)(Amarillo)  
COMPONENT VIDEO OUT  
R
R
R
R
AUDIO  
AUDIO  
AUDIO  
L
L
L
L
VIDEO S-VIDEO  
VIDEO  
Y
P
B
PR  
S-VIDEO  
RF-IN  
VIDEO S-VIDEO  
AC INT  
(L1)  
VIDEO  
OPTICAL  
AUDIO  
S-VIDEO  
RF-OUT  
(L3)  
VHF/UHF  
DIGITAL AUDIO OUT  
(PCM/BITSTREAM)  
Sintonización automática al enchufar  
Ventilador  
Después de adquirir este aparato, enchúfelo en  
una toma de CA del hogar y enciéndalo por  
primera vez. El aparato sintonizará todos los  
canales que pueda recibir y pondrá en hora el  
reloj automáticamente. Siga las instrucciones de  
la pantalla.  
A la toma de CA del hogar  
(CA 120 V, 60 Hz)  
Cable de alimentación de CA  
(suministrado)  
Selección del tipo de la pantalla del televisor  
1 Pulse [ê, POWER] para encender  
TV  
CH  
VOL  
POWER  
TV/AV  
este aparato.  
OPEN/CLOSE  
POWER  
2 Pulse [ACTION] para visualizar los  
1
P
menús.  
ENTER  
FRAME  
PROG / CHECK  
RETURN  
3 Utilice el mando de control [2, 1]  
para seleccionar la lengüeta TV  
Screen.  
3·4·5  
TOP WINDOW  
STATUS  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
4 Utilice el mando de control [3, 4]  
para seleccionar “TV Aspect” y pulse  
[ENTER].  
1
4
2
5
8
0
3
6
7
9
VCR Plus+  
100  
DVD  
REC REC MODE CANCEL  
INPUT  
CH  
5 Utilice el mando de control [3, 4]  
TIME SLIP CM SKIP  
SELECT  
para seleccionar el aspecto del  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
WRITE  
ACTION  
televisor y pulse [ENTER].  
³4:3 (ajuste de fábrica)  
³16:9  
2·6  
Estas instrucciones de funcionamiento describen las opera-  
ciones llevadas a cabo utilizando principalmente el mando a  
distancia. Las operaciones descritas también pueden reali-  
zarse utilizando el aparato principal siempre que sus botones  
tengan el mismo nombre que los del mando a distancia.  
6 Pulse [ACTION] para finalizar el  
ajuste.  
106  
RQT6035  
Cuando una pantalla de menús aparece en  
el televisor  
TV  
CH  
VOL  
POWER  
TV/AV  
[DVD-V] [VCD]  
OPEN/CLOSE  
POWER  
Pulse los botones numerados para seleccionar un ele-  
mento.  
1·1  
P
ENTER  
FRAME  
PROG / CHECK  
RETURN  
STATUS  
Función de reanudación  
TOP WINDOW  
Cuando pulse [1, PLAY], el aparato recordará la posición. Cuando  
pulse [1, PLAY] mientras parpadea “PLAY” en el visualizador, la  
reproducción empezará desde donde usted la detuvo.  
,
,
FRAME  
:, 9,  
SKIP  
SKIP  
SLOW/SEARCH  
6, 5,  
SL2OW/SEARCH  
STOP  
PAUSE  
PLAY  
Para cancelar  
∫, STOP  
;, PAUSE  
Pulse [º, STOP] hasta que “PLAY” desaparezca del visualizador  
del aparato.  
Para iniciar la reproducción desde una posición memorizada  
después de apagar el aparato  
1
4
2
5
8
0
3
6
Botones  
numerados  
7
9
VCR Plus+  
100  
Pulse [LAST MARKER] durante la reproducción.  
(El mensaje “Position Memorized” aparece en el televisor.)  
Ahora, cuando pulse [1, PLAY] después de poner el aparato en el  
modo de espera y luego encenderlo, la reproducción empezará  
desde la posición memorizada.  
DVD  
CH  
3
4
REC REC MODE CANCEL  
INPUT  
2
TIME SLIP CM SKIP  
SELECT  
LAST  
LAST  
ADD/DLT  
DVD  
V.S.S.  
TV  
AUDIO  
MARKER  
MARKER  
MARKER  
WRITE  
ACTION  
Salto  
Reproducción de discos  
Puede saltar al principio de las pistas y los capítulos y reiniciar la  
reproducción desde allí.  
En los DVD-RAM y DVD-R puede saltar al principio de un programa  
o a un marcador e iniciar la reproducción desde allí.  
Durante la reproducción o durante la pausa  
Pulse [:, SKIP] o [9, SKIP].  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
1 Pulse [<, OPEN/CLOSE] para abrir la  
bandeja del disco y coloque el disco.  
Insértelo con la etiqueta hacia  
Insértelo con la etiqueta hacia  
Visión cuadro a cuadro  
arriba y la flecha hacia adentro.  
arriba.  
[RAM] [DVD-R] [DVD-V] [VCD]  
Durante la pausa  
Pulse [2;, FRAME] o [;1, FRAME].  
Avance rápido y rebobinado—SEARCH  
Durante la reproducción  
Pulse [6, SLOW/SEARCH] o [5, SLOW/SEARCH].  
Reproducción a cámara lenta  
[RAM] [DVD-R] [DVD-V] [VCD]  
Durante la pausa  
Pulse [6, SLOW/SEARCH] o [5, SLOW/SEARCH].  
³Con los discos de dos caras, insértelos de forma que la eti-  
queta de la cara que desee reproducir quede hacia  
arriba.  
³Pulse [1, PLAY] para volver a iniciar la reproducción.  
³Durante las reproducciones cuadro a cuadro y a cámara  
lenta no puede retroceder en los CDs de vídeo.  
³[:], [2;], [6]: Retroceso  
2 Pulse [1, PLAY].  
La bandeja del disco se cierra y la reproducción empieza.  
³Para detener la reproducción, pulse [º, STOP].  
[9], [;1], [5]: Avance  
³Para hacer una pausa, pulse [;, PAUSE].  
Reproducción desde el comienzo del  
programa que está grabando—  
Persecución de reproducción  
Grabación de programas de TV  
[RAM] [DVD-R]  
1 Pulse [<, OPEN/CLOSE] para abrir la  
bandeja del disco y coloque el disco.  
[RAM]  
Durante la grabación o la grabación con temporizador  
Pulse [1, PLAY].  
2 Pulse [[DVD], W, X, CH] para seleccio-  
La reproducción empieza desde el principio del programa que está  
siendo grabado.  
nar el canal.  
Grabación y reproducción simultáneas  
3 Pulse [REC MODE] para seleccionar  
el modo de grabación.  
[RAM]  
Durante la grabación o la grabación con temporizador  
1 Pulse [TOP MENU, DIRECT NAVIGATOR].  
2 Utilice el mando de control [3, 4] para seleccionar el  
programa y pulse [ENTER].  
4 Pulse [´, REC] para iniciar la  
grabación.  
107  
RQT6035  
Index  
antenna  
protection, disc  
advanced. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
CATV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76  
releasing protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
using DISC SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
with the write-protect tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99  
protection, program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 86  
recording  
audio  
connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
during search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83  
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 41, 86  
connections  
from other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 44  
setting a time to finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 46  
VCR Plusi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
while playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
remote control  
batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81, 82  
use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 12  
with other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
with the television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
slow motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
surround sound  
connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 78  
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86  
virtual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 42, 78  
television  
connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 83  
tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 90, 91  
time  
antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 80  
audio, advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75–79  
audio, basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
cable television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 77  
surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 76  
video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15  
digital  
connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86  
discs  
care and cleaning of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98  
protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99  
types of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06  
erasing  
programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
parts of programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
finalizing DVD-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 55  
formatting DVD-RAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
frame-by-frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
languages  
abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 84  
code list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
on-screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83  
subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 84  
play  
setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87  
timer recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
tuning  
auto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 91  
VCR Plusi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
video  
chasing play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
random . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 42  
seamless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
while recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15  
picture quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only.  
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual  
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized  
by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
pr  
Panasonic Consumer Electronics  
Company, Division of Matsushita  
Electric Corporation of America  
One Panasonic Way Secaucus,  
New Jersey 07094  
Panasonic Sales Company,  
Division of Matsushita Electric  
of Puerto Rico, Inc. (“PSC”)  
Ave. 65 de Infantería, Km. 9.5  
San Gabriel Industrial Park,  
Panasonic Canada Inc.  
5770 Ambler Drive  
Mississauga, Ontario  
L4W 2T3  
www.panasonic.ca  
http://www.panasonic.com  
Carolina, Puerto Rico 00985  
C 2001 Matsushita Electric Industrial Co., Ltd.  
Printed in Japan  
RQT6035-P  
F0701MF0  

Kenmore 911 41785 User Manual
KitchenAid KECD806RSS03 User Manual
Motorola C51 Series User Manual
Motorola MCU DT128 User Manual
Philips 21PT2382 User Manual
Philips 28PW6008 User Manual
Philips 226C2 User Manual
Philips Brilliance 180P2M User Manual
Philips LCD MONITOR 170C5 User Manual
Philips MCD715 User Manual