Operating Instructions
DVD Recorder
Model No. DMR-ES40V
If you have any questions contact
In the U.S.A.: 1-800-211-PANA (7262)
Dear Customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully.
In Canada:
1-800-561-5505
For U.S.A. only
The warranty can be found on page 66.
Before connecting, operating or adjusting this product, please read
the instructions completely.
Please keep this manual for future reference.
For Canada only
The warranty can be found on page 67.
La guía rápida en español se encuentra en la página 70–79.
VQT0R73
VQT0R73-1
P PC
Getting started
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for future reference.
(1) Read these instructions.
(2) Keep these instructions.
(3) Heed all warnings.
(10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
(4) Follow all instructions.
(5) Do not use this apparatus near water.
(11) Only use attachments/accessories specified by the
manufacturer.
(6) Clean only with dry cloth.
(7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
(12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
(8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
(9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
(13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
(14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Precautions for installation
Useful features
You can enjoy both DVD and VHS with the unit.
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the unit.
This DVD Recorder can record images and sounds in high quality to
new features that outperform older tape formats. The following
information summarizes a few of these features.
ª DVD
Progressive output (l 14, 19)
Before moving the unit, ensure the disc tray is empty.
Failure to do so will risk severely damaging the disc and the
unit.
If you connect the unit with a progressive output compatible TV, you
TVs (of the interlace output type) can present.
Finalize (l 31)
Video format) and +R on other players.
∫Cautions as to condensation
Condensation can cause unreliable playback of VHS recordings.
Condensation may form in the following cases,
Instant play (l 33)
≥The unit is brought from cold surroundings into a well-heated room.
≥The unit is suddenly brought from cool surroundings, such as an
air-conditioned room or car, to a place which is hot and humid.
≥During the rainy season.
This function can quickly find and play a video program you wish to
recorded video program immediately.
In any of the above-mentioned conditions, do not operate the unit for
at least 2 hours. The unit is not equipped with a dew sensor.
Quick view (l 20)
This function allows you to watch news, information and other
programs in a short time.
∫Other precautions for installation
≥The unit should not be installed or operated near large magnets or
electromagnetic devices. Such devices can damage pre-recorded
VHS recordings.
≥Do not place any heavy objects atop the unit, and do not install it in
a confined space. Please allow for adequate air circulation.
≥The unit should not be mounted in a vertical position. It’s designed
to operate in the horizontal position.
Chasing play (l 26)
There is no need to wait until recording is complete. Without stopping
from its beginning.
Instant recording (l 24)
recording button, the unit finds available recording space and begins
recording right away.
About descriptions in these operating
instructions
≥Pages to be referred to are indicated as (l ±±).
≥The explanations concerning discs are indicated by [DVD], and
those concerning video are indicated by [VHS].
Simultaneous recording and play (l 26)
while recording another program.
Time slip (l 21, 26)
This function enables you to jump to the scene you specify during
play and also while recording.
≥These operating instructions describe operations mainly using the
remote control.
≥The contents of the screens used in these instructions may not
necessarily match what you will see on your screen.
≥The displays shown in these instructions are examples. Actual
display depends on discs.
One touch transfer (dub) (l 55, 56)
This function can copy video from VHS to DVD and vice versa.
ª VHS
Long recording (l 49)
With this function, you can record approx. 10 hours of video onto a
T-120 cassette, for example.
3
VQT0R73
Getting started
Contents
Precautions for installation................................................................3
Useful features..................................................................................3
Contents ...........................................................................................4
Maintenance .....................................................................................8
Accessories ......................................................................................9
Main unit .........................................................................................11
≥The unit’s display......................................................................11
- Other antenna connections to the unit...................................13
- To enjoy multi-channel surround sound on DVD-Video
- Connection to a stereo amplifier (analog connection)............14
STEP 2 Plug-in Auto Tuning..........................................................15
≥Channel captions......................................................................17
Changing the unit’s settings ...........................................................40
Entering a password (Ratings) .......................................................40
Summary of settings.......................................................................41
Clock Settings ................................................................................44
- Set Clock Automatically.........................................................44
Playing discs...................................................................................20
Skipping..........................................................................................20
Direct play.......................................................................................21
CM Skip ..........................................................................................21
Create chapters ..............................................................................21
Displaying the TV image as a picture-in-picture/
Changing audio during play............................................................21
Playing discs which contain both MP3 and still pictures.................22
Using menus to play MP3 discs......................................................22
≥Using the tree screen to find a group .......................................23
To show the JPEG Menu................................................................23
- Playing a still picture ..............................................................23
- Start Slide Show/Slide Interval...............................................23
- To select the still pictures in another folder............................23
4
VQT0R73
Getting started
Video cassette information .............................................................46
Cue/Review ....................................................................................47
Jet Search.......................................................................................47
Slow................................................................................................47
≥Specifying the time when recording will stop............................49
Check, change or delete programs.................................................51
Reproducción
Grabación
Grabación de programas televisivos..............................................78
≥Programación manual..............................................................79
VHS Index Search System (VISS)..................................................52
Changing the unit’s settings............................................................52
- Summary of settings ..............................................................52
When the DVD side is recording.....................................................53
Auto Bilingual Choice Function.......................................................53
Transferring (Dubbing)
Before transferring (dubbing)..........................................................54
Glossary..........................................................................................58
Error messages ..............................................................................60
Troubleshooting guide ....................................................................61
≥Common...................................................................................61
≥DVD..........................................................................................63
≥VHS..........................................................................................65
Product Service ..............................................................................65
≥Product information ..................................................................65
Limited Warranty (ONLY FOR U.S.A.) ...........................................66
Limited Warranty (ONLY FOR CANADA).......................................67
Specifications..................................................................................68
Index...............................................................................................69
5
VQT0R73
Getting started
Concerning discs
∫ Discs you can use for recording and play [12 cm (5z)/8 cm (3z)]
Disc type
Logo
DVD-RAM
≥4.7 GB/9.4 GB, 12 cm
(5z)
DVD-R
DVD-RW
rR
(DVD-Video format)
≥4.7 GB, 12 cm (5z)
≥1.4 GB, 8 cm (3z)
(DVD-Video format)
≥4.7 GB, 12 cm (5z)
≥1.4 GB, 8 cm (3z)
≥4.7 GB, 12 cm (5z)
≥2.8 GB, 8 cm (3z)
–
Indicated in these
instructions with
[-R] before finalization
[-RW‹V›] before finalization [+R] before finalization
[RAM]
[DVD-V] after finalization
[DVD-V] after finalization
[DVD-V] after finalization
Main use
Re-writable discs
(recordable until the disc
is full)
One time recording discs
(recordable until the disc
is full)
Maximum recording time
Play on other player
Approx. 8 hours
(Approx. 16 hours on a
double-sided disc°)
Approx. 8 hours
Approx. 8 hours
Approx. 8 hours
Only on DVD-RAM
compatible players. It is
not necessary to finalize
the disc. (l 58)
Only after finalizing the
disc. (l 31, 58)
Only after finalizing the
disc. (l 31, 58)
Only after finalizing the
disc. (l 31, 58)
What you can do on this unit
(Y: Possible, t: Impossible)
Chasing playback
Y
t
t
t
t
t
t
Recording broadcasts that
allow one copy
Y
(CPRM (l 58)
compatible discs only)
Recording both Main and
SAP of MTS broadcast
Y
Y
t
t
t
Only one is recorded.
(l 42, Select MTS)
Only one is recorded.
(l 42, Select MTS)
Only one is recorded.
(l 42, Select MTS)
Recording 16:9 aspect
picture
t
t
t
(The picture is recorded in (The picture is recorded in (The picture is recorded in
4:3 aspect.)
4:3 aspect.)
4:3 aspect.)
Entering text
Erasing titles
Y
Y
Y
Y
Y
Y
Y
Y
(Available space does not (Disc space increases
(Available space does not
increase after erasing.)
increase after erasing.)
only when the last
recorded title is erased.)
° You cannot consecutively record or play both sides.
≥We recommend using Panasonic discs. We recommend using DVD-RAM discs with cartridges to protect them from scratches and dirt.
≥Discs from other manufactures may not be recorded or played due to the condition of the recording.
≥You may not be able to record to DVD-R, DVD-RW and +R discs on this unit or play them due to the condition of the recording.
≥You cannot record programs that allow “One time only recording” to CPRM compatible DVD-R and DVD-RW on this unit. You can record
other programs as DVD-Video format.
≥You can use high speed recording compatible discs on this unit.
∫DVD Video Recording format
This is a recording method which allows you to record and edit TV
∫DVD-Video format
This recording method is the same as commercially available
broadcasts and so on.
DVD-Video.
≥Digital broadcasts that allow “One time only recording” can be
recorded to a CPRM compatible disc. You can record to CPRM
compatible DVD-RAM on this unit.
≥Play is only possible on a compatible DVD player.
Use a DVD-RAM to record in DVD Video Recording format.
≥Digital broadcasts that allow “One time only recording” cannot
be recorded.
≥These can be played on a DVD player. However programs
recorded on this unit must be finalized to be played on other
DVD players.
Use a DVD-R or DVD-RW to record in DVD-Video format.
6
VQT0R73
Getting started
∫ Play-only discs [12 cm (5z)/8 cm (3z)]
Disc type
Logo
DVD-Video
DVD-RW (DVD Video Recording format)
rRW
Audio CD
Video CD
–
–
Indicated in these
instructions with
[DVD-V]
[-RW‹VR›]
[DVD-V]
[CD]
[VCD]
Instructions
High quality
movie and
music discs
DVD-RW° recorded on another DVD recorder
≥You can play programs that allow “One time
only recording” if they have been recorded to a another
CPRM compatible disc. DVD
≥By formatting (l 31) the disc, you can record to recorder
+RW°
Recorded CD-R° and CD- Recorded
recorded on audio and RW° with music music and
music
recorded in
video
(including MP3 (l 22)
(including
CD-R/
RW°)
CD-R/
Still pictures
(JPEG)
it in DVD-Video format and play it on the unit.
RW°)
recorded on
CD-R/RW°
It may be necessary to finalize the disc on the equipment used
for recording.
° Play may be impossible on some DVD-RW (DVD Video Recording format), +RW, CD-R or CD-RW discs due to the condition of the
recording.
≥You can play still pictures (JPEG), CD-DA, Video CD and MP3 format data recorded on CD-R/RW. Close the session or finalize the disc
after recording.
≥The producer of the disc can control how discs are played. So you may not always be able to control play as described in these operating
instructions. Read the disc’s instructions carefully.
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so
play may not be possible.
Example:
Region number supported by this unit
Region numbers are allocated to DVD players and DVD-Video according to where they are sold.
1
2
1
ALL
≥The region number of this unit is “1”.
≥The unit will play DVDs marked with labels containing “1” or “ALL”.
4
∫ Discs that cannot be played
∫ Concerning logo marks
≥2.6/5.2 GB DVD-RAM, 12 cm (5z)
≥3.95/4.7 GB DVD-R for Authoring
Dolby Digital (l 42)
This is a method of coding digital signals
developed by Dolby Laboratories. Apart from
stereo (2 channel) audio, these signals can also
be multi-channel audio. A large amount of audio
information can be recorded on one disc using this
method.
≥DVD-R recorded in DVD Video Recording format
≥DVD-R (DVD-Video format), DVD-RW (DVD-Video format), +R
recorded on another unit and not finalized (l 58, Finalize)
≥PAL discs (you can still play the audio on DVD-Audio)
≥DVD-Video with a region number other than “1” or “ALL”
≥DVD-Audio
≥Blu-ray
DTS Digital Surround (l 42)
≥DVD-ROM, DVD-R DL, +R DL, +R 8cm (3z), CD-ROM, CDV, CD-
G, Photo CD, CVD, SVCD, SACD, MV-Disc, PD, DivX Video Disc,
etc.
This surround system is used in many movie
theaters around the world. The separation
between channels is good and the compression
ratio is low, so realistic sound effects are possible.
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem
with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused
by such loss.
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company.
≥A disc used as described above and then played again in this unit.
≥A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.
7
VQT0R73
Getting started
∫ Disc handling
∫ Inserting discs
∫How to hold a disc
Do not touch the recorded surface.
[1] Press [<, OPEN/CLOSE] on the main unit to
open the tray.
≥You can insert a cartridge or non-cartridge disc.
[2] Press [<, OPEN/CLOSE] on the main unit to
close the tray.
Note
∫Concerning non-cartridge discs
≥A double-sided disc should be loaded with the side you want to
record/play facing down.
Be careful about scratches and dirt.
≥It is not possible to record continuously from one side of a double-
sided disc to the other. You will need to eject the disc and turn it
over.
∫If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
≥When using 8 cm (3q) DVD-RAM or 8 cm (3q) DVD-R, remove the
disc from the cartridge.
Non-cartridge disc
Cartridge disc
(1)
(2)
∫Handling precautions
≥Do not attach labels or stickers to discs. (This may cause disc
warping and unbalanced rotation, rendering it unusable.)
≥Write on the label side of the disc only with a soft, oil-based felt
pen. Do not use ballpoint pens or other hard writing implements.
≥Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥Do not use scratch-proof protectors or covers.
≥Do not drop, stack, or cause impact to discs. Do not place objects
on them.
D
DV
(3)
(1) Insert label-up.
(2) Insert fully so it clicks into place.
(3) Insert label-up with the arrow facing in.
≥Do not use the following discs:
- Discs with exposed adhesive from removed stickers or labels
(rental discs etc.).
- Discs that are badly warped or cracked.
Maintenance
The precision parts in the unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.
- Irregularly shaped discs, such as heart shapes.
To clean the unit, wipe with a soft, dry cloth.
≥Never use alcohol, thinner or benzine to clean the unit.
≥Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
≥Do not place in the following areas:
- In direct sunlight.
- In very dusty or humid areas.
- Near a heater.
- Locations susceptible to significant differences in temperature
changes (condensation can occur).
- Where static electricity or electromagnetic waves occur.
≥To protect discs from scratches and dirt, return them to their cases
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, possibly
making it impossible to record or play discs.
frequency of use and the operating environment.
Carefully read the lens cleaner’s instructions before use.
DVD lens cleaner: RP-CL720PP
∫When the unit is not to be used for a long time
To save power, unplug it from the household AC outlet. The unit consumes a small amount of power even when it is turned off.
Standby power consumption
Front Display (l 43)
Automatic
Approx. 9 W
Approx. 2.1 W
Bright
On
Off
Approx. 11 W
Approx. 2.1 W
Quick Start (l 41)
∫Quick Start (l 41)
1 Sec. Quick Start for Recording on DVD-RAM°
° When the unit is turned off, press [Í, DVD/VHS POWER] and then [¥, REC] (Quick Start Mode). Recording on DVD-RAM starts about 1
second after pressing these buttons.
8
VQT0R73
Getting started
Using DVD-R, DVD-RW and +R on this unit
Restrictions with DVD-R, etc.°
≥16:9 aspect programs are recorded in 4:3 aspect.
≥Both Main and SAP cannot be recorded for MTS broadcasts.
≥Playing the disc on other DVD players is not possible before finalizing.
° DVD-R, DVD-RW and +R are collectively referred to as “DVD-R, etc.” on this page.
Main
SAP
The selected audio only is recorded.
e.g., Main only
Hello
Hola
Record to DVD-R, etc.
Hello
16:9 aspect program
with Main and SAP
4:3 aspect
Therefore, follow the steps below when you use DVD-R, etc.
∫When recording an SAP program to DVD-R, etc.
Select the audio to record before recording or transferring (dubbing).
Some television programs are broadcast in SAP (Secondary Audio Program). You have to select the audio recording type before recording or
transferring (dubbing) them to DVD-R, etc.
Select “Main” or “Secondary Audio
Program (SAP)” in “Select MTS” in
the SETUP menu (l 42).
Record to DVD-R, etc. The selected audio only is recorded.
Main
Main
SAP
SETUP
Dynamic Range Compression
Select MTS
Off
Hello
Hello
Hola
Main
Channel
Setup
Disc
Digital Audio Output
Select Audio Channel For DV Input
Stereo 1
Video
Audio
∫Playing the disc on other DVD players
The disc must be finalized after recording or transferring (dubbing) (l 31).
It is necessary to finalize DVD-R, etc. on this unit after recording or transferring (dubbing) titles to them. You can then play them as a
commercially sold DVD-Video. However the discs become play-only and you can no longer record or transfer (dub).°
° You can record and transfer (dub) again if you format DVD-RW.
Play on other DVD equipment
Record to DVD-R, etc.
Finalize
CH
AR
SE
ER
ENT
L
V
O
Y
PLA
DIS
NU
ME
T
OP
N
TUR
RE
NU
ME
N
Í
/I
Í
D
O
U
B
L
E
R
E
-
M
A
S
T
E
R
C
D
S
E
Q
U
E
N
T
I
A
L
DISC
1
2
3
4
5
∫
;
1
:/6
5/9
D
I
S
C
E
X
C
H
A
N
G
E
D
I
S
C
S
K
I
P
<OPEN/CLOSE
F
OF
DC
IN
9V
EN
OP
D
UN
RO
UR
A.S
T
EA
D
E
R
EP
MO
OR
NIT
MO
E
E
M
OD
TUR
PIC
Accessories
Please check and identify the supplied accessories. Use product numbers indicated in parentheses when asking for
replacement parts. (Product numbers correct as of January 2005. These may be subject to change.)
Only for U.S.A.: To order accessories, refer to “Accessory Purchases” on page 66.
Only for Canada: To order accessories, call the dealer from whom you have made your purchase.
∏ 1 AC power supply cord
∏ 1 75 ≠ coaxial cable
∏ 1 Remote control
∏ 2 Batteries for the remote control
(K2CB2CB00006)
(K2KZ2BA00001)
(EUR7720LB0)
∏ 1 DVD RAM disc
≥For use with the unit only.
Do not use it with other
equipment. Also, do not
use cords belonging to
other equipment with the
unit.
∏ 1 Audio/Video cable
(U.S.A. only)
Product Registration Card
Please complete and return the included product registration card,
or register via the Internet at:
(K2KA6BA00003)
9
VQT0R73
Getting started
Remote control
(28)
(27)
∫[VHS] and [DVD] button
[DVD]
≥Before performing DVD operations, be sure to
press the [DVD] button. Also, make sure the
DVD indicator lights up on the unit.
DVD/ VHS POWER
TV
POWER
VHS
CH
DVD
(1)
REC
VOLUME
CH
INPUT SELECT TV/ VIDEO
[VHS]
(2)
(3)
≥Before performing VHS operations, be sure to
press the [VHS] button. Also, make sure the
VHS indicator lights up on the unit.
VHS
CH
DVD
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
REC
(1) Turn the unit on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 15
(2) Input select (IN1, IN2 or DV). . . . . . . . . . . . . . . . . . . . . . .l 57
(3) Select drive (DVD or VHS) . . . . . . . . . . . . . . . . . . . . l above
(4) Select channels and title numbers etc./Enter numbers
(5) Cancel/Reset the tape counter
(26)
(24)
(4)
AUDIO
(25)
(23)
(6) Basic operations for recording and play
CANCEL/RESET
VCR Plus+
CM SKIP
(7) Show Top menu/Direct Navigator . . . . . . . . . . . . . . .l 22, 33
(8) Selection/Enter, Frame-by-frame. . . . . . . . . . . . . . . .l 15, 21
(9) Show sub menu . . . . . . . . . . . . . . . . . . . . . . . . . .l 23, 33, 37
(10)Show scheduled recording list . . . . . . . . . . . . . . . . .l 29, 51
(11)Show on-screen menu . . . . . . . . . . . . . . . . . . . . . . . . . . .l 38
(12)Start recording . . . . . . . . . . . . . . . . . . . . . . . . . . .l 24, 49, 57
(13)Change recording mode . . . . . . . . . . . . . . . . . . . . . .l 24, 49
(14)One touch transfer (dub) (“ DVD, VHS —) . . . . . . . . .l 55, 56
(15)Create chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 21
(16)Select VCR/TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 19
(17)Erase items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 21
(18)Add/delete channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 16
(19)Show status messages . . . . . . . . . . . . . . . . . . . . . . .l 45, 53
(20)Skip the specified time/
(5)
(6)
SLOW/
SKIP/ INDEX
REW SEARCH FF
PLAY
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
(22)
(21)
(7)
(8)
(9)
RETURN
TIME SLIP
SUB MENU
Display the TV image as a picture-in-picture
Jet rewind button (JET REW). . . . . . . . . . . . . . . .l 21, 26, 47
(21)Return to previous screen
S
SCHEDULE
DISPLAY
STATUS
JET REW
(22)Show FUNCTIONS window . . . . . . . . . . . . . . . . . . . .l 45, 52
(23)Skip a minute forward . . . . . . . . . . . . . . . . . . . . . . . . . . .l 21
(24)Show VCR Plusi screen . . . . . . . . . . . . . . . . . . . . . .l 28, 50
(25)Select audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 21, 25, 53
(26)Channel select/
TRACKING/V-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 48
(27)TV operations . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 18, 25, 49
(28)Transmission window
(10)
(11)
(12)
(13)
(20)
(18)
(16)
(19)
(17)
REC
REC MODE DVD ERASE ADD/DLT
CREATE
VCR/TV
DUBBING
VHS
A
CHAPTER
DVD
B
(14)
(15)
Note
≥Buttons such as the [¥, REC] button do not protrude as much as other buttons to stop them from being pressed accidentally.
≥The word “button” is not used in these operating instructions so “Press the [ENTER] button.” is shown as “Press [ENTER].”
≥You can use this remote control to operate your TV if you set the TV manufacturer code (l 18).
∫ Batteries and remote control
∫About batteries
≥Insert so the poles (i and j) match
those in the remote control.
∫How to use the remote control
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m
(23 feet) directly in front of the unit.
R6, AA, UM-3
≥Do not use rechargeable type batteries.
Remote control signal sensor
Do not:
≥mix old and new batteries.
20
≥use different types at the same time.
≥heat or expose to flame.
20
30
≥take apart or short circuit.
30
≥use batteries if the covering has been peeled off.
7 m (23 feet) directly in front of the unit
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Note
≥Keep the transmission window and the unit’s sensor free from dust.
≥Operation can be affected by strong light sources, such as direct
sunlight, inverter fluorescent lamps, and the glass doors on
cabinets.
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Note
≥If you cannot operate the unit or TV using the remote control after
changing the batteries, please re-enter the codes (l 18).
10
VQT0R73
Getting started
Main unit
(3)
(1) (2)
(4)
(5) (6) (7)
POWER
OPERATION
SELECT
EJECT
OPEN/CLOSE
VHS
CH
DVD
S
VIDEO IN
REC
–
SKIP
5/9
DVD
:/6
–
REW/FF VHS
DUBBING
VIDEO IN
L/MONO– AUDIO IN
–
R
VHS
DVD
IN2
/k1.3
DV IN
(8) (9)
(10)
(11) (12) (14)
(13) (15)
(16)
(1) Remote control signal sensor/
(10)The unit’s display
DVD/VHS POWER on/off button (Í/I, POWER) . . . . . . . l 15
≥To switch the unit from on to standby mode or vice versa.
In the standby mode, the unit is still consuming a small
amount of power.
(11)Channel up/down buttons (CH, W, X) . . . . . . . . . . . . . . .l 48
(12)Stop button (∫) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 20, 47
(13)Play/t1.3 button (1/t1.3) . . . . . . . . . . . . . . . . . . . . .l 20, 47
(16)One Touch Transfer (Dubbing) operation button
(2) Cassette eject button (<, EJECT) . . . . . . . . . . . . . . . . . l 46
(3) Cassette compartment
(4) Disc tray open/close button (<, OPEN/CLOSE) . . . . . . . l 8
(5) Disc tray
≥From VHS to DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 55
≥From DVD to VHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 56
(6) DVD/VHS drive indicator
≥Lights when the DVD or VHS drive is selected.
(7) Operation select button
∫Off Timer
The unit automatically switches to standby when it has not been
used for about 6 hours.
(8) DVD–SKIP, VHS–REW/FF buttons
You can turn this feature off or change the time to 2 hours.
(l 41, “Off Timer”)
(:/6, 5/9). . . . . . . . . . . . . . . . . . . . . . . . . . l 20, 47
(9) IN2 input terminals (IN2) . . . . . . . . . . . . . . . . . . . . . . . . . l 57
∫ The unit’s display
REC
P TV
(5) Scheduled recording indicator ( ) (l 28, 50)
≥The scheduled recording indicator lights only when the unit’s
power is off.
(1) Recording indicator
≥The recording indicator for the drive selected. When the power
is off, it doesn’t matter which drive is selected.
On:
On:
Flashes: During pause recording
(2) TV indicator
During recording
When a scheduled recording program is registered and
recordable disc or tape is inserted.
Flashes:
≥The indicator lights during the TV mode and it goes out during
the VCR mode. You can switch the mode by using [VCR/TV].
(l 19)
The scheduled recording indicator flashes when the unit cannot
start (e.g. there is no disc, tape, etc.) the scheduled recording.
(6) Main display
Digital Clock, Counter, etc.
(7) Disc indicator
(3) Tape indicator
(4) Progressive indicator
≥The indicator lights during outputting in progressive.
11
VQT0R73
Getting started
STEP 1 Connection
≥Please read “Precautions for installation”. (l 3)
≥Before connection, turn off all equipment and read the appropriate operating instructions.
∫ Connecting a TV and VCR
indicates included accessories.
indicates accessories not included.
Red
Outdoor
antenna
Indoor
antenna
Cable TV
White
Yellow
∫Connection (without Audio/Video cable)
Connect in numerical order 1 to 3.
cable on channel 3 or 4. It is possible to view the video
picture on your TV in the same way that you watch TV
broadcasts.
Antenna cable
AUDIO IN
≥After this connection, set the RF output channel to
“CH3” or “CH4” (l 15).
VHF/UHF
RF IN
VIDEO IN
R
L
Splitter
TV
Use a splitter if you also
want to connect the
antenna to your VCR.
∫ Connection (with Audio/Video cable)
Connect in numerical order 1 to 4.
≥After this connection, set the RF output channel to
“OFF” (l 15).
1
75 ≠ coaxial cable
Audio/Video cable
1
2
3
2
RF IN
COMPONENT VIDEO OUT (480p/480i)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
R - AUDIO - L
VIDEO
VIDEO
Y
PB
PR
S VIDEO
S VIDEO
T
OPTICAL
R - AUDIO - L
VIDEO
R - AUDIO -
To IN1
75 ≠ coaxial cable
Cooling fan
3
Audio/Video cable
4
To household AC outlet
Video cassette recorder
(AC 120 V, 60 Hz)
AC power supply cord
Connect to household AC outlet only
after all other connections are complete.
R
L
VIDEO
VHF/UHF
RF IN
AUDIO OUT OUT
≥If the antenna connector doesn’t match (l 13)
∫Connection examples with other equipment
∫Do not connect the unit through a video cassette
recorder
Amplifier (l 14)
Video camera (l 57)
Video signals sent through video cassette recorders will be affected
by copyright protection systems and the picture will not be shown
correctly on the TV.
TV
TV
From the AUDIO/VIDEO OUT terminal
or the DIGITAL AUDIO OUT terminal
The unit
VCR
VCR
The unit
The unit
To IN2 input terminals (front)
≥When connecting the unit to a TV with a built-in VCR, connect to
the input terminals on the TV, not the VCR.
For your reference
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables are sold separately
unless otherwise indicated
.
12
VQT0R73
Getting started
∫ Connecting a cable TV box/satellite receiver
≥You need to subscribe to a cable TV or satellite TV service to enjoy viewing their programming.
≥Consult your service provider regarding an appropriate cable TV box or satellite receiver.
≥You can enjoy viewing cable TV or satellite TV programming.
≥You can record and view scrambled and unscrambled channels
simultaneously if connections are made as shown in the diagram
below.
To AUDIO/VIDEO IN
To VHF/UHF RF IN
TV
To AUDIO/VIDEO IN
To VHF/UHF RF IN
TV
Audio/Video cable
Audio/Video cable
COMPONENT VIDEO OUT (480p/480i)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
RF
R - AUDIO - L
R - AUDIO - L
VIDEO
VIDEO
Y
PB
PR
COMPONENT VIDEO OUT (480p/480i)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
R - AUDIO - L
R - AUDIO - L
VIDEO
VIDEO
S
VIDEO
S
VIDEO
Y
PB
PR
RF OUT
S
VIDEO
S
VIDEO
OPTICAL
RF OUT
R - AUDIO - L
VIDEO
OPTICAL
R - AUDIO - L
VIDEO
The unit
Cable TV box
75 ≠ coaxial cable
The unit
Cable TVOUT
box
Satellite receiver
75 ≠ coaxial cable
or
IN
OUT
IN
OUT
IN
IN
2-way
splitter
From antenna or
cable TV jack
OUT2 OUT1
IN
IN
OUT
Cable TV box
From cable TV jack
From satellite dish antenna
¢ For more information on connections (l 12)
∫ If the antenna connector does not match
1 Other antenna connections to the unit
1 Other antenna connections from the unit
to the TV
Use one of the following connections to suit your antenna lead.
≥If your TV has both lead and coaxial VHF terminals, use the lead
connection to minimize signal loss.
Use one of the following connections to suit the antenna terminals on
your TV. Refer to the TV’s operating instructions.
∫A single twin lead
from the antenna
∫A twin lead and coaxial plug terminal
300 ≠ to 75 ≠
VHF
UHF
transformer
VHF/UHF band separator
75 ≠ coaxial cable
(Flat) Twin lead
300 ≠ cable
To the unit’s
RF IN terminal
TV
∫A twin lead and a coaxial cable
∫A twin lead terminal
from the antenna
VHF
or
UHF
VHF/UHF band mixer
75 ≠ to 300 ≠ transformer
(Flat) Twin lead 300 ≠ cable
75 ≠ coaxial cable
TV
To the unit’s
(Round)
75 ≠ coaxial cable
RF IN terminal
∫2 twin lead terminals
VHF/UHF band separator
VHF
UHF
∫2 twin leads
from the antenna
75 ≠ coaxial cable
TV
VHF/UHF band mixer
∫Multiple antenna terminals
≥ Connect to one of the ANT terminals, then change the TV’s setting
(Flat) Twin lead 300 ≠ cable
as necessary.
To the unit’s
TV
RF IN terminal
300 ≠ to 75 ≠ transformer
Split out
ANT 1
75 ≠ coaxial cable
ANT 2
13
VQT0R73
Getting started
∫ DVD output and DVD/VHS output
∫ To enjoy even higher fidelity
The unit has DVD/VHS COMMON output terminals and DVD
PRIORITY output terminals.
1 Connection to the S-VIDEO IN terminal
S-VIDEO OUT terminal
DVD/VHS COMMON output
The S-VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the TV.)
TV
(1) Audio input terminals (L/R)
COMPONENT VIDEO OUT (480p/480i)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
R - AUDIO - L
R - AUDIO - L
VIDEO
VIDEO
Y
PB
PR
(2) S-Video input terminal
(3) Audio cable (not supplied)
A Red (R)
(1)
(2)
S
VIDEO
S
VIDEO
AUDIO IN
OPTICAL
R
L
VIDEO IN
S VIDEO IN
R - AUDIO - L
VIDEO
B White (L)
(4) S-Video cable (not
supplied)
(5) Rear panel of the unit
(6) Audio output terminals (L/R)
(7) S-Video output terminal
DVD PRIORITY output
DVD/VHS COMMON OUT
≥For DVD/VHS COMMON output terminals, both DVD and VHS
signals can be output.
(4)
(3)
(5)
DVD PRIORITY OUT
CMPONENVIDEO OUT (480p/
DIGITAL AUDIO OUT
R - AUDIO - L
VIDEO
Y
P
PR
(PCM/BITSTREAM)
≥You can also playback a tape with the DVD PRIORITY output
terminal except while recording, or making a scheduled recording,
on the DVD.
S
OPTICAL
(6)
(7)
R - AUDIO - L
VIDEO
UDIO - L
VIDEO
∫ Connecting an amplifier or system
1 Connection to the COMPONENT VIDEO IN
component
terminals
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive output
1 To enjoy multi-channel surround sound on
DVD-Video (digital connection)
(l
58) and provide a purer picture than the S-VIDEO OUT terminal.
DVD only
≥Connect to terminals of the same color.
≥Connect an amplifier with a built-in Dolby Digital or DTS decoder.
(l 7)
≥Change the settings in “Digital Audio Output”. (l 42)
≥You cannot use any amplifier with a DTS Digital Surround decoder
not suited to DVD.
TV
(1)
COMPONENT
VIDEO IN
(2)
AUDIO IN
(1) Component input terminals
(2) Audio input terminals (L/R)
(3) Component video cable
(not supplied)
R
L
(1)
(1) Rear panel of the unit
(2) Optical digital output terminal
(3) Optical digital audio cable
(not supplied)
(4) Audio cable (not supplied)
A Red (R)
B White (L)
(5) Rear panel of the unit
(6) COMPONENT VIDEO OUT
terminals
(7) Audio output terminals (L/R)
(5)
(3)
(4)
COMPONENT VIDEO OUT (480p/480i)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
R
R
Y
PB
PR
S
VIDEO
OPTICAL
A Insert fully, with this side
facing up. (Do not bend when
connecting.)
(2)
PONIDEO (480p/40)
AUDIO OUT
ITSTREAM)
R - AUDIO - L
VIDEO
R - AUDIO - L
R - AUDIO - L
VIDEO
VIDEO
(6)
(7)
- AUDIO -
(4) Optical digital input terminal
(5) Amplifier’s rear panel
(3)
A
(4)
OPTICAL IN
(5)
1 Connection to a stereo amplifier
(analog connection)
(1) Rear panel of the unit
(1)
(2) Audio output terminals (L/R)
(3) Audio cable (not supplied)
COMPONENT VIDEO OUT (480p/480i)
DIGITAL AUDIO OUT
R
Y
PB
PR
(PCM/BITSTREAM)
(2)
S
VIDEO
A Red (R)
OPTICAL
B White (L)
- AUDIO
VIDEO
R
(4) Audio input terminals (L/R)
(5) Amplifier’s rear panel
(3)
(5)
(4)
R
L
AUDIO IN
14
VQT0R73
Getting started
STEP 2 Plug-in Auto Tuning
[2] Press [CH, W, X] to select an RF output channel
number.
DVD/VHS POWER
TV
POWER
Í
The unit’s display
Connection (without Audio/Video
cable):
VOLUME
CH
INPUT SELECT TV/VIDEO
Select “CH3” or “CH4” which displays
the screen on the right.
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
Connection (with Audio/Video
cable):
Select “OFF”
CH, W, X
AUDIO
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
The unit’s display
Each time you press the button:
CH3 (Default setting) (# CH4 (# OFF
^-----------------------------------------------J
3, 4
ENTER
SUB MENU
RETURN
[3] Use [3, 4] to select the language and press
S
[ENTER].
TIME SLIP
JET REW
SCHEDULE
DISPLAY
STATUS
[4] Press [ENTER] to start Plug-in Auto Tuning.
≥The unit then proceeds with Auto Clock Setting. The time is
displayed when Auto Clock Setting is finished.
After plugging the unit into your household AC outlet and pressing
[Í, DVD/VHS POWER] to turn the unit on for the first time, the unit
assists you in setting the on-screen language, and automatically
tunes in all the channels it can receive and sets the clock.
Set Channels Automatically
Set Clock Automatically
Auto Clock Setting is complete.
The unit automatically determines the type of transmission (airwaves
or cable) and puts them into channels as follows.
1
Ch.
Set Channels Automatically
Proceeding .
11/1/2005 12:15 AM
DST............. On
Time Zone.... CST
.
.
Band
Channel
2 to 13
1
1
1
VHF
Antenna Mode
≥DST, Daylight Saving Time, shows the summertime setting.
≥Time Zone shows the time difference from Greenwich Mean
Time (GMT).
(Airwaves)
UHF
14 to 69
2 to 13
VHF
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time) l GMT j6
CATV LOW BAND
CATV MID/SUPER BAND
CATV HYPER BAND
95 to 99
14 to 36
37 to 65
l GMT j8
CableTV Mode
(Cable)
AST (Alaska Standard Time) l GMT j9
For other areas: xx hr
66 to 94
100 to 125
ULTRA BAND
[5] Press [ENTER].
SPECIAL CATV CHANNEL
1
∫If the clock is an hour slower or faster than the actual
Preparation
time
≥Press [DVD].
Select “j1” or “i1” in “Adjust Time Zone” in the SETUP menu
(l 44).
≥Turn on the TV and select the appropriate video input to suit the
connections to the unit. (Example: AV input, CH3 or CH4)
≥If you connect the unit through a cable TV box or satellite receiver
(l 13), tune to your local PBS for Auto Clock Setting to work.
If there is no local PBS, set the clock manually (l 44, “Set Clock
Manually”).
∫If the unit couldn’t set the clock automatically
Set the time manually (l 44, “Set Clock Manually”).
∫To start Plug-in Auto Tuning again
[1] Press [Í, DVD/VHS POWER].
Signal source, RF output channel, channel caption, and
guide channel settings for VCR Plusi system all revert to
the default values when you perform the procedure below.
Scheduled recording settings are also cleared.
Select Language
Seleccione el idioma
Sélection de Langue
English
Español
Français
When the unit is on and stopped
[1] Press and hold [CH, W] and [CH, X] on the main unit for about 5
seconds.
Press ENTER
Pulse ENTER
Appuyer sur ENTER
The unit turns off.
[2] Press [Í, DVD/VHS POWER] to turn the unit on.
Plug-in Auto Tuning starts.
15
VQT0R73
Getting started
∫ Adding and deleting channels
Add or delete channels if necessary channels are not set or
unnecessary channels are set.
DVD/VHS POWER
TV
POWER
VOLUME
CH
INPUT SELECT TV/VIDEO
[1] Press the numbered buttons to select a
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
channel.
Antenna Mode (Airwaves)
The unit’s display
Numbered
buttons
CH, W, X
e.g.,
“5”:
“15”:
[0] )[5]
[1] )[5]
AUDIO
CableTV Mode (Cable)
CANCEL/RESET
VCR Plus+
CM SKIP
e.g.,
“5”:
“15”:
“115”:
[0] )[0] )[5]
[0] )[1] )[5]
[1] )[1] )[5]
SLOW/
SKIP/INDEX
REW SEARCH FF
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
PLAY
≥You can also use [CH, W, X] to select a channel.
FUNCTIONS
[2] Press [ADD/DLT].
3, 4, 2, 1
e.g., The channel is deleted.
Channel 15 Deleted
ENTER
SUB MENU
RETURN
TIME SLIP
S
RETURN
ADD/DLT
SCHEDULE
DISPLAY
STATUS
JET REW
STEP 3 Channel settings
ADD/DLT
F.REC
REC
REC MODE DVD ERASE
CREATE
∫ Guide channel settings for VCR Plusi
COPYING
CHAPTER
system
∫ If Plug-in Auto Tuning fails
®
Set these guide channels so you can use VCR Plusi system for
scheduled recording. Before starting the settings, prepare a chart
showing the station names, guide channels and channel numbers.
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [3, 4] and press
e.g., :
[ENTER].
Station
name
Guide
channel°
Channel
number°°
Channel setting
FUNCTIONS DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Playback
Schedule
DIRECT NAVIGATOR
PLAYLISTS
CBS
04
04
Unnecessary
FLEXIBLE RECORDING
DV AUTO RECORDING
Enter channel 15 next
to Guide Channel 33.
SCHEDULE
VCR Plus+
SETUP
2
HBO
33
15
1
3
DISC MANAGEMENT
Enter channel 20 next
to Guide Channel 38.
Nickelodeon
38
20
Other Functions
Return
ENTER
° Look up the guide channels for the stations in magazines.
°° Write down all the stations you can receive.
[3] Select “SETUP” with [3, 4] and press [ENTER].
SETUP
Signal Source (RF IN)
CableTV
Set Channels Automatically
≥If you have connected a cable TV box or satellite receiver, the
VCR Plus_ system does not work so you do not have to set the
guide channels.
Channel
Setup
Disc
Channel Captions
Preset Channel Captions
Manual Channel Captions
Video
Audio
Display
VCR Plusi Ch. Setting
[1] While stopped
[4] Select “Channel” with [3, 4] and press [2, 1].
Press [FUNCTIONS].
[2] Select “Other Functions” with [3, 4] and press
[ENTER].
[5] Select “Signal Source (RF IN)” with [3, 4] and
press [ENTER].
[3] Select “SETUP” with
SETUP
Signal Source (RF IN)
CableTV
SETUP
Signal Source (RF IN)
Set Channels Automatically
[3, 4] and press
[ENTER].
[4] Select “Channel” with
[3, 4] and press
[2, 1].
Antenna
Channel
Setup
Disc
Channel
Setup
Disc
Channel Captions
Preset Channel Captions
CableTV
Manual Channel Captions
Video
Audio
Display
VCR Plusi Ch. Setting
[6] Select “Antenna” or “CableTV” with [3, 4] and
press [ENTER].
[7] Select “Set Channels Automatically” with
[5] Select “VCR Plusr Ch.
Setting” with [3, 4]
SETUP
VCR Plusi Ch. Settings
[3, 4] and press [ENTER].
Guide Channel Cable Channel
Channel
Setup
---
---
125
1
[8] Press [ENTER].
and press [ENTER].
e.g., “Signal Source (RF IN)” is
set to “CableTV”.
Disc
≥Auto Channel Setting starts. This takes a few minutes.
Video
Audio
[9] Press [ENTER].
Display
TV Screen
VHS
---
---
2
3
ENTER
∫To cancel in the middle
Press [RETURN].
[6] Use [3, 4] to select the
guide channel you want
to set and press [1].
SETUP
VCR Plusi Ch. Settings
∫To exit the screen
Press [RETURN] several times.
Guide Channel Cable Channel
Channel
Setup
---
---
4
5
Disc
Video
---
6
Audio
---
---
Display
TV Screen
VHS
7
8
ENTER
16
VQT0R73
Getting started
[7] Use [3, 4] to select the channel corresponding
1 Manual Channel Captions
to the guide channel and press [2].
≥To delete a number, press [CANCEL/RESET, ¢].
≥Repeat steps 6 and 7 to enter other channels.
≥Follow steps 1 to 4 of “Channel captions”.
[5] Select “Manual Channel Captions” with [3, 4]
and press [ENTER].
[8] Press [ENTER].
[6] Use [3, 4] to select the channel and press [1].
≥Channels are only displayed if they contain a station and if
preset captions have not been added.
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN] several times.
[7] Use [3, 4] to select the first character and
press [1].
≥You can choose from the following characters:
A to Z, 0 to 9, -, &, !, /, (space)
≥To delete the caption, press [CANCEL/RESET, ¢].
≥Repeat this step to enter the other characters.
VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation.
The VCR Plus+ system is manufactured under license from
Gemstar Development Corporation.
SETUP
Manual Channel Captions
Channel Number Caption
Channel
Setup
Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and 4,706,121
----
----
6
8
Disc
Video
AAAA
10
∫ Channel captions
You can use the preset captions, or manually enter new ones
yourself.
Audio
Display
TV Screen
VHS
----
----
12
23
ENTER
The captions you enter are used as channel names and displayed on
the Direct Navigator screen.
[8] Use [2, 1] to return to the “Channel Number”
column.
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other
≥Repeat steps 6 to 8 to enter other channels.
FUNCTIONS DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
[9] Press [ENTER].
Playback
Schedule
DIRECT NAVIGATOR
PLAYLISTS
FLEXIBLE RECORDING
DV AUTO RECORDING
SCHEDULE
VCR Plus+
SETUP
∫To return to the previous screen
Press [RETURN].
2
1
3
DISC MANAGEMENT
Functions” with [3, 4]
and press [ENTER].
Other Functions
Return
∫To exit the screen
ENTER
Press [RETURN] several times.
[3] Select “SETUP” with
[3, 4] and press
[ENTER].
SETUP
Signal Source (RF IN)
CableTV
Set Channels Automatically
Channel
Setup
Disc
Channel Captions
Preset Channel Captions
Manual Channel Captions
Video
Audio
[4] Select “Channel” with
[3, 4] and press
[2, 1].
VCR Plusi Ch. Setting
≥Go to the item you want to set next.
1 Preset Channel Captions
≥Follow steps 1 to 4 of “Channel captions”.
[5] Select “Preset Channel Captions” with [3, 4]
and press [ENTER].
SETUP
Preset Channel Captions
Caption Channel Number
Channel
Setup
---
---
GLOB
ABC
Disc
Video
Audio
Display
TV Screen
VHS
---
---
PBS
CBS
ENTER
[6] Use [3, 4] to select the caption and press [1].
You can choose from the following captions.
ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,
FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CTV,
WB, TSN, DSC, GLOB
[7] Use [3, 4] to select the channel corresponding
to the caption and press [2].
≥Channels are displayed only when they contain a station and if
captions have not been added manually.
≥To delete the channel number, press [CANCEL/RESET, ¢].
≥Repeat steps 6 and 7 as necessary.
[8] Press [ENTER].
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN] several times.
17
VQT0R73
Getting started
STEP 4 Set up to match your TV and remote control
∫To exit the screen
Press [RETURN] several times.
DVD/VHS POWER
TV
TV, Í
POWER
∫ TV operation
VOLUME
CH
INPUT SELECT TV/VIDEO
To turn the TV on/off, change the TV input mode, select the TV
channel and change the TV volume by means of this remote control,
set the remote control as follows.
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
Point the remote control at the TV
While pressing [Í POWER TV], enter the code
using the numbered buttons.
e.g., 01: press [0] > [1].
CH, W, X
Numbered
buttons
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
Manufacturer and Code No.
SLOW/
SKIP/INDEX
REW SEARCH FF
PHILIPS (RC-5)
RCA
03
Panasonic
National
QUASAR
DIRECT NAVIGATOR
TOP MENU
PFLUANYCTIONS
01, 02
05
FUNCTIONS
SAMSUNG
SANYO
14, 18, 19
3, 4, 2, 1
FISHER
GE
10
10
ENTER
SUB MENU
RETURN
05
SHARP
06, 07
08
S
RETURN
VCR/TV
GOLDSTAR
HITACHI
JVC
15, 16, 17
SONY
TIME SLIP
JET REW
REC
REC MODE DVD ERASE ADD/DLT
Y
STATUS
12
SYLVANIA
THOMSON
TOSHIBA
ZENITH
03
CREATE
DUBBING
VCR/TV
CHAPTER
VHS
DVD
11
05
LG
15, 16, 17
09
∫ When other Panasonic products respond
MAGNAVOX
MITSUBISHI
03
13
04
to this remote control
≥Test by turning on the TV and changing channels. Repeat the
procedure until you find the code that allows correct operation.
≥If your TV brand is not listed or if the code listed for your TV does
not allow control of your TV, this remote control is not compatible
with your TV.
If other Panasonic products are placed close together, change the
remote control code on the main unit and on the remote control (the
two must match). When changing the remote control code, make
sure the two codes are same.
Under normal circumstances use the factory set code “1”.
[1] While stopped
FUNCTIONS DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Press [FUNCTIONS].
[2] Select “Other
Playback
Schedule
DIRECT NAVIGATOR
PLAYLISTS
FLEXIBLE RECORDING
DV AUTO RECORDING
SCHEDULE
VCR Plus+
SETUP
2
1
3
DISC MANAGEMENT
Functions” with [3, 4]
and press [ENTER].
[3] Select “SETUP” with
[3, 4] and press
[ENTER].
Other Functions
Return
ENTER
[4] Select “Setup” with [3, 4] and press [2, 1].
[5] Select “Remote Control Code” with [3, 4] and
press [ENTER].
[6] Use [3, 4] to select the code (1, 2 or 3) and
press [ENTER].
≥The code on the unit has been set.
[7] While pressing [ENTER], press and hold the
numbered button ([1], [2] or [3]) corresponding
to the code you selected in step 6 for about 2
seconds.
≥The code on the remote control has been set.
[8] Press [ENTER].
∫When the following indicator appears on the unit’s
display
The unit’s remote control code
Change the code on the remote control to match the main unit’s code
(l step 7).
∫To return to the previous screen
Press [RETURN].
18
VQT0R73
Getting started
∫ Selecting TV type
∫ Removing Interference
You do not have to change the setting when connected to a 4:3
standard aspect TV that is not compatible with progressive output.
(l 58)
Connection (without Audio/Video cable) only
TV screen
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [3, 4] and press
[ENTER].
[3] Select “SETUP” with [3, 4] and press [ENTER].
Picture with interference
[4] Select “TV Screen” with [3, 4] and press
[2, 1].
In some cases, there may be interference (lines or patterning) or
a very poor picture on the TV when the DVD Recorder is
connected. If this happens, follow the steps below to change
the video playback channel (RF output channel). This will
remove the interference.
[5] Select “TV Type” with [3, 4] and press
[ENTER].
SETUP
TV Type
4:3 TV
Channel
Setup
Aspect 4:3 & 480i
[1] Press [FUNCTIONS] for
RF Output Channel
Aspect 4:3 & 480p
Disc
more than 5 seconds.
The RF output channel number is
16:9 Widescreen TV
Aspect 16:9 & 480i
Aspect 16:9 & 480p
Video
Press the channel up/down buttons
to select a RF Output Channel.
Audio
Display
TV Screen
VHS
displayed on the unit display.
Ch.
3
ENTER
[2] Press [CH, W, X] to select
a channel number (CH3 or
CH4).
≥Aspect 4:3/Aspect 16:9:
ENTER
4:3
16:9
The unit’s display
4:3 standard aspect TV
16:9 widescreen TV
≥480p/480i:
The unit’s display
Select “480p” if the TV is compatible with progressive output.
[6] Use [3, 4] to select the item and press
[ENTER].
Each time you press the button:
CH3 (Default setting) (# CH4 (# OFF
^-----------------------------------------------J
When progressive output is selected, the following screen
appears:
≥When progressive output is selected, you will not be able to
see the picture unless the TV is connected to the
COMPONENT VIDEO OUT terminal on this unit. This is not a
malfunction.
≥Set the RF output channel of the DVD Recorder to “OFF”
(RF OFF) when the DVD Recorder is connected to a TV via the
Audio/Video cable.
[3] Press [ENTER] to finish this setting.
(1) Select “Yes” with [2] and
TV Type
Do you want to use the Component Video
press [ENTER].
≥A confirmation screen
appears.
(2) Press [ENTER].
output connections (Green Blue and Red
connectors) ?
Select "No" unless you have the unit
connected to your TV using the three-
cable component video connection. If it's
connected in this way, select "Yes".
Yes
No
The clear picture
ENTER
To change to interlace
≥When the picture is distorted, press and hold [CANCEL/
RESET, ¢] until the picture is displayed correctly.
∫When you set the RF output channel to “CH3” or
“CH4”
∫To return to the previous screen
A picture is output on CH3 or CH4 from RF output.
Press [RETURN].
Press [VCR/TV] to switch the mode from TV to VCR, and vice
versa.
≥When the TV mode is selected, the “TV” indicator lights on the
unit’s display and you can watch TV.
∫To exit the screen
Press [RETURN] several times.
≥When the “TV” indicator does not light, then the VCR mode is
selected and you can watch images from the unit.
19
VQT0R73
DVD
Playback
DVD
∫ When a menu screen appears on the TV
[VCD]
DVD/VHS POWER
TV
POWER
Í
Press the numbered buttons to select an item.
VOLUME
CH
INPUT SELECT TV/VIDEO
e.g.:
“5”: [0] )[5]
“15”: [1] )[5]
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
[DVD-V]
Press [3, 4, 2, 1] to select an item and press [ENTER].
CH, W, X
≥You can sometimes use the numbered buttons to select an item.
Numbered
buttons
AUDIO
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
CM SKIP
SLOW/
SEARCH
Note
SKIP/INDEX
REW
FF
:, 9
6, 5
≥ If “ ” appears on the TV, the operation is prohibited by the unit
or disc.
PLAY
1
;
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
Quick View (Play t1.3)
[RAM]
The play speed can be increased without distorting the audio.
3, 4, 2, 1
2;, ;1
ENTER
During play
DVD-RAM
Play
DVD-RAM
Play x1.3
SUB MENU
RETURN
Press and hold [1, PLAY].
S
TIME SLIP
JET REW
SCHEDULE
DISPLAY
STATUS
∫To return to normal speed
Press [1, PLAY].
TIME SLIP
REC
REC MODE DVD ERASE ADD/DLT
CREATE
DVD ERASE
CREATE CHAPTER
COPYING
VCR/TV
CHAPTER
Fast forward and rewind — SEARCH
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
VHS
DVD
e.g., DVD-RAM
Preparation
During play
≥Turn on the TV and select the appropriate video input to suit the
connections to the unit.
≥Press [DVD].
DVD-RAM
Press [6, SLOW/SEARCH] or
•
•
•
•
5
[5, SLOW/SEARCH].
≥There are 5 search speeds. Each press
increases the search speed.
k2
Playing discs
≥Press [1, PLAY] to restart playback.
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
[1] Press [Í, DVD/VHS POWER] to turn the unit on.
[2] Insert a disc. (l 8)
For your reference
≥Audio is heard during all levels of search. [CD]
≥Depending on the disc, search may not be possible.
[3] Press [1, PLAY].
Skipping
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
≥The disc tray closes and play begins.
(The unit takes some time to read the disc before play starts.)
≥Playback starts from the most recently recorded title.
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
During play or while paused
Press [:, SKIP] or [9, SKIP].
≥Each press increases the number of skips.
≥Playback starts from the beginning of the disc.
[DVD-V] [VCD] [CD]
Slow-motion play
[RAM] [-R] [-RW‹V›] [+R] (Motion picture parts only) [DVD-V]
∫ To stop play
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
[-RW‹VR›] [VCD]
During play
While paused
Press [∫, STOP].
≥The stopped position is memorized.
Press [6, SLOW/SEARCH] or [5, SLOW/
SEARCH].
Resume play function
Press [1, PLAY] to restart from this position.
≥Depending on the type of [VCD], the resume play function may not
work.
≥When slow motion play is continued for about 5 minutes it pauses
automatically (except [DVD-V] [VCD]).
≥There are 5 play speeds. Each press increases the play speed.
≥Press [1, PLAY] to restart playback.
Stopped position
≥[VCD] Forward direction ([5, SLOW/SEARCH]) only.
≥If [∫, STOP] is pressed several times, the position is cleared.
≥The position is cleared if the unit is turned off or the tray is opened.
∫ To pause play
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
During play
Press [;, PAUSE].
≥Press again or press [1, PLAY] to restart play.
20
VQT0R73
Playback
DVD
Frame-by-frame viewing
[RAM] [-R] [-RW‹V›] [+R] (Motion picture parts only) [DVD-V]
Displaying the TV image as a picture-in-
picture/Selecting an amount of time to
skip — Time Slip
[-RW‹VR›] [VCD]
While paused
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
Press [2;] ([2]) or [;1] ([1]).
≥Each press shows the next or previous frame.
≥Press and hold to change in succession forward or backward.
≥Press [1, PLAY] to restart playback.
Press [TIME SLIP] during play and the PIP (Picture-In-Picture)
screen (TV image) is displayed in the lower right part of the main
screen. You can watch both playback images and TV images at the
same time. In the main screen, you can also instantly access a
scene you want to view by specifying an amount of time you want to
skip.
≥[VCD] Forward direction ([;1], [1]) only.
Direct play
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
[1] During play
Play
(1)
0 min
Press [TIME SLIP].
You can play from the title, chapter or track you select.
≥The PIP screen (TV images)
appears.
≥You can change the channel
being received by pressing
[CH, W, X].
≥You will hear the playback
(2) Currently receiving images
audio of the main screen.
During play
CH 8
(2)
Press the numbered buttons to select an item.
[CD] (MP3 and JPEG disc only)
e.g.:
“5”: [0] )[5]
“15”: [1] )[5]
“5”: [0] )[0] )[5]
(1) Play images
“15”: [0] )[1] )[5]
≥This works only with some discs when stopped
(screen saver is displayed l right).
Screen saver
[2] While observing the time
Play
indicator at the top right
–5 min
Press [3, 4] to set an
amount of time to skip
CH 8
and press [ENTER].
≥Play skips the amount of time
you specified.
Erasing a title that is being played
[RAM] [-R] [-RW‹V›] [+R]
≥The time indicator will go off after about 5 seconds, but will turn
on again when you set the time.
Once title is erased, it cannot be restored. Make certain before
proceeding.
∫To clear the PIP screen
Press [TIME SLIP].
[1] During play
Press [DVD ERASE].
[2] Press [2] to select “Erase” and press [ENTER].
For your reference
≥The blue background does not appear on the PIP screen. (l 43)
≥You cannot change the channel being received while recording.
For your reference
≥You cannot erase while recording or transferring (dubbing).
≥[-R] [+R] Available space does not increase after erasing.
≥[-RW‹V›] Disc space increases only when the last recorded title is
erased.
Changing audio during play
≥You can select audio types depend on the recording medium.
[RAM] [-RW‹VR›] [VCD] (l 45)
Stereo# Mono L# Mono R
^--------------------------------------}
DVD-RAM
CM Skip
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
You can skip approximately 1 minute with one press.
During play
e.g.: [RAM]
“Stereo” is
selected.
Play
Stereo
[RAM] [-RW‹VR›] [When playing an SAP broadcast recorded on DVD-
RAM, DVD-RW (DVD Video Recording format)]
MAIN () SAP
Press [CM SKIP].
Create chapters
[DVD-V] (l 38)
This allows you to change items like the audio channel number and
[RAM]
the sound track language.
During play or while paused
Press [CREATE CHAPTER].
≥
Press [:, SKIP] or [9, SKIP] to skip to the start of a chapter.
1 ENG
Î Digital 3/2.1ch
Soundtrack
≥You cannot activate this function when you are carrying out TIME
SLIP (l 26) or transfer (dub).
e.g.: English is the selected language.
Note
≥If you cannot change the audio type when you have used only an
optical digital cable for connection, set “Dolby Digital” to “PCM”
(l 42). Alternatively, you may connect to an amplifier with an
Audio/Video cable and change the input on the amplifier to suit the
connection.
21
VQT0R73
Playback
DVD
Regarding MP3 and still pictures (JPEG)
≥Compatible formats: ISO9660 level 1 or 2 (except for extended
formats) and Joliet
≥Maximum number of files (tracks) and folders (groups)
recognizable: 999 files (tracks) and 99 folders (groups)
≥This unit is compatible with multi-session but reading or play of
the disc may take time if there are a lot of sessions.
≥Operation may take time to complete when there are many files
(tracks) and/or folders (groups) and some files (tracks) may not
display or be playable.
DVD/VHS POWER
TV
POWER
VOLUME
CH
INPUT SELECT TV/VIDEO
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
Numbered
buttons
AUDIO
≥The display order on this unit may differ from how the order is
displayed on a computer.
≥Depending on how you create the disc (writing software), files
(tracks) and folders (groups) may not play in the order you
numbered them.
CANCEL/RESET
VCR Plus+
CM SKIP
SLOW/
SKIP/INDEX
REW SEARCH FF
:, 9
PLAY
≥This unit is not compatible with packet-write format.
≥Depending on the recording, some items may not be playable.
Regarding MP3
≥File format: MP3
Files must have the extension “.mp3” or “.MP3”.
≥Bit rates: 32 kbps to 320 kbps
≥Sampling frequency: 16 kHz/22.05 kHz/24 kHz/32 kHz/44.1 kHz/
48 kHz
≥This unit is not compatible with ID3 tags.
≥If there is a large amount of still picture data etc. within a MP3
file, play may not be possible.
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
TOP MENU
FUNCTIONS
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
S
RETURN
STATUS
SUB MENU
SCHEDULE
DISPLAY
STATUS
JET REW
REC
REC MODE DVD ERASE ADD/DLT
2
Regarding still pictures (JPEG)
Preparation
≥File format: JPEG (non-compressed RGB chunky format)
Files must have the extension “.jpg” and “.JPG”.
≥Number of pixels: 34 k 34 to 3840 k 2160
(Sub sampling is 4:2:2 or 4:2:0)
This unit cannot play images that have resolutions beyond the
range shown.
≥Press [DVD].
and still pictures
[CD]
≥MOTION JPEG is not supported.
The screen shown below is displayed when you insert a disc
containing MP3 files and still pictures (JPEG).
Using menus to play MP3 discs
[CD]
The unit plays MP3 files recorded on CD-R/RW designed for audio
recording that are finalized (l 58) on a computer. Files are treated
as tracks and folders are treated as groups.
Press [ENTER].
∫To play MP3
Refer to “Using menus to play MP3 discs”.
(l right)
∫To play still pictures
Refer to “To show the JPEG Menu”. (l 23)
Playback mode is set to MP3.
If you want to play picture (JPEG),
select JPEG Menu from Menu in FUNCTIONS.
ENTER
[1] During stop or play
Press [TOP MENU].
≥The file list appears.
≥You can play MP3 and still pictures (JPEG) on this unit by making
folders as shown below. However depending on how you create
the disc (writing software), play may not be in the order you
numbered the folders.
Selected Group No. and Name
≥English alphabetical characters and Arabic numerals are
displayed correctly. Other characters may not be displayed
correctly.
≥When the highest level folders are “DCIM” folders, they are
displayed first on the tree.
No.
1
Group
Track
Menu
:
My favorite
G:
G
T
1
1
Total
Tree
1
2
3
4
5
6
7
8
9
001 Both Ends Freezing
002 Lady Starfish
003 Lefe on Jupiter
004 Metal Glue
005 Paint It Yellow
006 Pyjamamama
007 Shirims from Mars
008 Starperson
The Group Number
T:
Track Number in the Group
Total:
Selected Track Number/
Total Track Number
Total
1/ 24
No.
0
–
9
Prev.
Next
Structure of MP3 folders
Prefix with 3-digit numbers
in the order you want to play
them.
Structure of still pictures
(JPEG)
009 Velvet Cuppermine
010 Ziggy Starfish
Page 001/016
10
ENTER
Files inside a folder are
displayed in the order they
were updated or taken.
Root
[2] Press [3, 4] to select the track and press
[ENTER].
Tree
≥Play starts on the selected track.
≥“
P0000001.jpg
P0000002.jpg
001 A
” indicates the track currently playing.
≥You can also directly select the track with the numbered
002 C
001track.mp3 B
002track.mp3
003track.mp3
P0000003.jpg
P0000004.jpg
P0000005.jpg
buttons.
e.g.:
002 A
001track.mp3
003 A
“6”: [0] )[0] )[6]
“10”: [0] )[1] )[0]
003 C
002track.mp3
003track.mp3
004track.mp3
P0000006.jpg
004 C
P0000007.jpg
P0000008.jpg
001track.mp3
002track.mp3
003track.mp3
∫Using the tree screen to find a group (l 23)
P0000009.jpg
P0000010.jpg
P0000011.jpg
P0000012.jpg
Order of play
Order of play
∫To show other groups
Press [:] (Prev.) or [9] (Next) to show other pages.
≥After listing all the tracks in one group, the list for the next group
appears.
AFolder = Group
BFile = Track
CFolder
∫To exit the file list
Press [TOP MENU] or [RETURN].
22
VQT0R73
Playback
DVD
∫ Using the tree screen to find a group
1 Playing a still picture
≥Make sure that the JPEG Menu screen appears by following the
steps in “To show the JPEG Menu”.
[1] While the file list is displayed (l 22)
Press [1] while a track is highlighted to display
the tree screen.
Use [3, 4, 2, 1] to select a still picture you want
to watch and press [ENTER].
≥You can also select a still picture by entering a 3-digit with the
numbered buttons.
Tree
Selected Group Number/Total
Group Number
≥If the group has no track, “– –”
is displayed as group number.
Menu
G
1/ 15
3
G
1
1
MP3 music
/My favorite/
T
Total
/My favorite/Brazillian pops/
/My favorite/Chinese pops/
/My favorite/Czech pops/
/My favorite/Hungarian pops/
/My favorite/Liner notes/
/My favorite/Japanese pops/
/My favorite/Mexican pops
/My favorite/Philippine pops/
/My favorite/Swedish pops/
1/ 24
9
e.g.:
“5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
No.
–
0
≥You can watch the still pictures in order by pressing [2]
(previous) or [1] (next).
3
ENTER
To rotate a still picture
[1] Press [SUB MENU].
[2] Select “Rotate Right” or “Rotate Left” with [3, 4]
and press [ENTER].
Rotate Right
≥You cannot select groups with no MP3 files.
≥Press [2, 1] to jump layers in the tree screen.
Rotate Left
[2] Press [3, 4] to select a group and press
[ENTER].
ENTER
To show the picture properties
≥The file list for the selected group appears.
11/24 10:15 PM
[1] Press [STATUS] twice.
≥Press [STATUS] again, the
properties disappear.
∫To return to the file list
Press [RETURN].
Date 11/23/2005 No. 100/123
Shooting Date
To show the JPEG Menu
1 Start Slide Show/Slide Interval
≥Make sure that the JPEG Menu screen appears by following the
[CD] [with MP3 files and still pictures (JPEG)]
steps in “To show the JPEG Menu”.
FUNCTIONS DVD
[1] While stopped
CD(MP3/JPEG)
Playback Mode: MP3
You can display still pictures one by one with constant interval.
Menu
Playback
MENU
Press [FUNCTIONS].
[2] Select “MENU” with [3,
4] and press [ENTER].
[3] Select “JPEG Menu”
with [3, 4] and press
[ENTER].
Menus
JPEG Menu
CD (JPEG)
Picture (JPEG) View
08 11/21 Mon
[1] Select “Folder” with [3]
and press [SUB MENU].
[2] Select “Start Slide
Show” with [3, 4] and
press [ENTER].
Select a playback mode from
the following menus.
Folder
8
MP3 Menu
JPEG Menu
Start Slide Show
Slide Interval
[CD] [with still pictures (JPEG) only]
∫To exit the Slide Show
Press [TOP MENU].
JPEG Menu screen
Press [TOP MENU].
≥Depending on the JPEG file size,
the thumbnail may not be shown
correctly.
≥Except for 4:3 JPEG thumbnails,
the thumbnail may not be shown
correctly.
JPEG Menu
CD (JPEG)
Picture (JPEG) View
To Change the display timing
Folder
08 8 11/21 Mon
[1] Select “Slide Interval” with [3, 4] in step 2 and press [ENTER].
[2] Press [2, 1] to select the desired timing (0 to 30 seconds) and
press [ENTER].
≥When the selected JPEG file size is large, the actual slide interval
may be longer than the selected timing.
Previous
Page 01/01
Next
Play
∫To show other pages
Press [:] (Previous) or [9] (Next) to show other pages.
You can also press [ ] to select “Previous” or “Next” and
press [ENTER] to show other pages.
1 To select the still pictures in another folder
≥Make sure that the JPEG Menu screen appears by following the
steps in “To show the JPEG Menu”.
≥
3
,
4
,
2
,
1
∫To exit the JPEG Menu
Press [TOP MENU] or [RETURN].
[1] Select “Folder” with [3]
AB
JPEG Menu
CD (JPEG)
Select Folder
and press [ENTER].
[2] Select the folder with
[3, 4] and press
F
1/1
12_02_2005
[ENTER].
ASelected folder no./Total folder no.
BYou cannot select folders that
contain no compatible files.
ENTER
23
VQT0R73
Recording
DVD
Recording TV programs
[4] Press [REC MODE] to
select the recording
DVD/VHS POWER
TV
CH, W, X
POWER
Í
mode (XP, SP, LP or EP).
VOLUME
CH
INPUT SELECT TV/VIDEO
Remaining time on the disc
TV/VIDEO
[5] Press [¥, REC] to start
recording.
OPERATION
SELECT
REC
DVD
TRACKING/V-LOCK
VHS
DVD
≥You cannot change the channel or
Numbered
buttons
CH, W, X
AUDIO
recording mode during recording. You can change them while
recording is paused, but the subsequent material is recorded
as a separate title.
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
SLOW/
∫To pause recording
SKIP/INDEX
REW SEARCH FF
Press [;, PAUSE]. (Press again to restart recording.)
≥Title is not split into separate titles.
PLAY
∫
≥You can also press [¥, REC] to restart recording.
;
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
∫To stop recording
Press [∫, STOP].
FUNCTIONS
≥Recorded as 1 title until the position where stopped.
≥It takes about 30 seconds for the unit to complete recording
management information after recording finishes. [-R] [-RW‹V›] [+R]
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
S
RETURN
∫ Recording modes and approximate
recording times
SCHEDULE
DISPLAY
STATUS
JET REW
REC
REC MODE
DVD ERASE ADD/DLT
CREATE
STATUS
REC MODE
VCR/TV
(Unit: hour)
µ
DVD-RAM
DUBBING
VCR/TV
CHAPTER
DVD-R
DVD-RW
+R
VHS
DVD
Single-sided Double-sided
(4.7 GB)
(9.4 GB)
Preparation
≥Press [DVD].
(4.7 GB)
XP (High quality)
SP (Normal)
1
2
2
1
2
[RAM] [-R] [-RW‹V›] [+R]
4
8
LP (Long play)
EP (Extra long play)
4
4
≥You can record up to 99 titles on a disc (49 titles [+R]).
≥It is not possible to record digital broadcasts that allow “One time
only recording” onto DVD-R, DVD-RW, +R or 8 cm (3q) DVD-RAM
8 (6°)
16 (12°)
8 (6°)
become shorter than indicated.
≥Recording will take place on open space on the disc. Data will not
be overwritten.
≥If there is no space left on the recording disc, you will need to erase
unwanted titles (l 21, 33) or use a new disc.
XP
SP
When recording to DVD-R, DVD-RW (DVD-Video format) or +R
≥When recording MTS broadcasts
- If you do not connect a cable TV box
LP
MTS” in the SETUP menu (l 42).
- If you connect a cable TV box
EP (6H)°
EP (8H)
Select “Main” or “SAP” on the cable TV box.
≥The aspect ratio of the recorded image will be 4:3.
≥In order to play a DVD-R, DVD-RW (DVD-Video format) or +R
recorded using this unit on another playback source, the
disc must first be finalized (l 31).
Recording time
“EP-Extended Play (6H)” in the SETUP menu. (l 41)
The sound quality is lower compared to other recording modes
when using “EP-Extended Play (8H)”.
Preparation
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Select an audio type you want to record. (l 25)
Note
When recording to DVD-RAM using EP (8H) mode, play may not be
possible on DVD players that are compatible with DVD-RAM. In this
case use EP (6H) mode.
[1] Press [Í, DVD/VHS POWER] to turn the unit on.
[2] Insert a disc. (l 8)
≥When using a DVD-RAM for the first time with the unit, format it
to ensure accurate recording (l 31, “Format Disc”).
FR (Flexible Recording mode l 25):
≥You can set FR mode when programming scheduled recordings.
To select with the numbered buttons:
Antenna Mode (Airwaves)
e.g.,
“5”:
“15”:
[0] )[5]
[1] )[5]
CableTV Mode (Cable)
e.g.,
“5”:
“15”:
“115”:
[0] )[0] )[5]
[0] )[1] )[5]
[1] )[1] )[5]
24
VQT0R73
Recording
DVD
Selecting audio to record
Flexible Recording mode (FR)
[RAM]
[RAM] [-R] [-RW‹V›] [+R]
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) with the
best picture quality.
Press [AUDIO].
Stereo # SAP # Mono
^----------------------------}
Stereo:
Main audio (stereo). If the broadcast is “Mono_SAP”,
audio will be monaural even if you select Stereo
mode.
Using “FLEXIBLE RECORDING” is convenient in these kinds
of situations.
≥When the amount of free space on the disc makes selecting an
appropriate recording mode difficult
≥When you want to record a long program with the best picture
quality possible
e.g., Recording a 90 minute program to disc
If you select XP mode, the program will not fit on one disc.
SAP:
Secondary audio program (SAP). If recorded in SAP,
main audio is also recorded.
Mono:
Main audio (monaural). Select “Mono” if reception is
poor during a stereo broadcast.
No disc
e.g., “Stereo” is selected.
A second disc is necessary for
30 minutes of the program.
“((” appears when the unit is receiving
the audio type you selected.
CH 12
4.7 GB
DVD-RAM
4.7 GB
DVD-RAM
((Stereo
[-R] [-RW‹V›] [+R]
If you select SP mode, the program will fit on one disc.
Select the audio [Main or Secondary Audio
Program (SAP)] in “Select MTS” in the SETUP
menu. (l 42)
However there will be 30 minutes
remaining disc space
4.7 GB
DVD-RAM
Specifying the time when recording will
stop
While recording
Press [¥, REC] to select the recording time.
≥You can also press [¥, REC] on the main unit.
If you select “FLEXIBLE RECORDING” the
program will fit on one disc perfectly.
4.7 GB
DVD-RAM
Preparation
≥Press [DVD].
≥Select the channel to record.
The unit’s display
Each time you press the button:
Counter (Cancel) # OFF 0:30 # OFF 1:00 # OFF 1:30
^------- OFF 4:00 ! OFF 3:00 ! OFF 2:00 !----------}
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other
Functions” with [3, 4]
and press [ENTER].
[3] Select “FLEXIBLE
RECORDING” with
[3, 4] and press
[ENTER].
FUNCTIONS DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Playback
DIRECT NAVIGATOR
PLAYLISTS
FLEXIBLE RECORDING
DV AUTO RECORDING
For your reference
≥This does not work during scheduled recording or Flexible
Recording.
≥Recording stops and the set time is cleared if you press [∫, STOP].
≥The set time is cleared if you change the recording mode or
channel while recording is paused.
Schedule
SCHEDULE
VCR Plus+
SETUP
2
1
3
DISC MANAGEMENT
Other Functions
Return
ENTER
FLEXIBLE RECORDING
Record in FR mode.
Watching the TV while recording
Preparation
≥Connection (without Audio/Video cable)
- Make sure that the “TV” indicator is lit on the unit’s display. If it is
not lit, press [VCR/TV] to light it.
Maximum rec. time
1 Hour 23 Min.
1 Hour 23 Min.
Set recording time
[4] Press [3, 4, 2, 1] to
Start
Cancel
set the recording time.
≥Maximum recording time is 8
hours.
≥Connection (with Audio/Video cable)
- Press [TV/VIDEO] to change the input mode to “TV”.
[5] Select “Start” with [3, 4, 2, 1] and press
[ENTER].
≥Recording starts.
Press TV’s [CH, W, X] to select the desired TV
channel.
∫To exit the FLEXIBLE RECORDING window without
recording
For your reference
Press [RETURN].
≥You can also do this if the unit is making a scheduled recording.
≥The recording is unaffected.
∫To stop recording in the middle
Press [∫, STOP].
∫To show the time remaining until recording finishes
Press [STATUS].
DVD-RAM
Remaining
time
Rec. 1:22
25
VQT0R73
Recording
DVD
∫ TIME SLIP
DVD/VHS POWER
TV
POWER
Press [TIME SLIP] while recording. Play starts from 30 seconds
earlier. You can start play from even earlier by specifying an amount
of time to skip on the time indicator.
VOLUME
CH
INPUT SELECT TV/VIDEO
SLOW/
OPERATION
REW
SELECT
SKIP/INDEX
FF
VHS
SEADRCVH D
DVD
[1] While recording or
Play
0 min
TRACKING/V-LOCK
(1)
scheduled recording
PLAY
1
Press [TIME SLIP].
∫
≥The PIP screen (image
currently being recorded) is
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
Rec.
(2)
FUNCTIONS
DIRECT NAVIGATOR
displayed.
3, 4, 2, 1
≥On the main screen, play
starts from 30 seconds
earlier.
≥You will hear the playback
audio.
(1) Play starts from
30 seconds earlier.
(2) The image currently
being recorded.
ENTER
SUB MENU
RETURN
S
TIME SLIP
JET REW
SCHEDULE
DISPLAY
STATUS
TIME SLIP
REC
REC MODE DVD ERASE ADD/DLT
CREATE
[2] While observing the time
indicator at the top right
Play
–5 min
REC MODE
COPYING
VHS
F.REC
CHAPTER
DVD
Press [3, 4] to set the
amount of time to skip
Preparation
≥Press [DVD].
Rec.
and press [ENTER].
≥Play skips the amount of time
you set.
≥The time indicator goes off after about 5 seconds. However it
turns on again when you set the time.
Playing while you are recording
[RAM]
Hint
∫To show the play images in full
Press [TIME SLIP].
≥Press [TIME SLIP] to return to the PIP screen.
≥Sound is not output while fast-forwarding.
∫ Chasing play
You can start play from the beginning of the title while continuing to
record it.
For your reference
≥The image on the PIP screen may be distorted or flicker depending
on the scene. However, this does not affect the image recorded.
While recording or scheduled recording
Press [1, PLAY].
∫To stop play and recording
[1] Press [∫, STOP]. Play stops.
≥Play starts while recording proceeds.
(Wait 2 or more seconds.)
[2] Press [∫, STOP]. Recording stops.
For your reference
≥After recording has started, it will take time before this feature can
≥You cannot stop recording with [∫, STOP] during scheduled
then [ENTER] within 5 seconds.
- You can also press and hold [∫] on the main unit for 3 or
more seconds to stop scheduled recording.
be used.
∫ Simultaneous recording and play
You can play a title previously recorded while you are recording
another title.
[1] While recording or scheduled recording
Press [DIRECT NAVIGATOR]. (l 33)
¥: Currently recording
∫ Playing VHS while recording
You can play tapes while recording. The recording will not be
affected.
≥VHS playback (l 47)
DIRECT NAVIGATOR Title View
DVD-RAM
07
08
09
10 11/21 Mon
8
11/21 Mon
-/--
-
-
-
-
-
-
[2] Use [3, 4, 2, 1] to select a title and press
[ENTER].
≥ Play starts while recording proceeds.
∫To exit the Direct Navigator screen
Press [DIRECT NAVIGATOR].
For your reference
≥During simultaneous recording and play, you cannot edit or erase
titles with the Direct Navigator or playlists.
26
VQT0R73
Recording
DVD
∫ DV automatic recording
(DV AUTO RECORDING)
[RAM]
When the “DV AUTO RECORDING” function is used, programs are
recorded as a title. At the same time chapters are created at each
break in the images automatically.
Preparation
(1) Turn off the main unit and DV equipment, then connect the
equipment with the unit’s DV input terminal (l 57).
(2) Turn on the main unit and DV equipment.
(3) Pause play of the DV equipment at the point you want recording
to start.
(4) Press [DVD].
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [3, 4] and press
[ENTER].
[3] Select “DV AUTO RECORDING” with [3, 4] and
press [ENTER].
[4] Press [REC MODE] to select the recording
mode. (l 24)
[5] Select “Rec.” with [2, 1] and press [ENTER].
≥Recording starts.
∫When recording finishes
The confirmation screen appears. Press [ENTER] to finish DV
automatic recording.
∫To stop recording
Press [∫, STOP].
∫Notes on DV automatic recording
≥Only one piece of DV equipment (e.g., digital video camcorder)
can be connected to the unit via the DV input terminal.
≥Video camcorders from other manufacturers are not guaranteed
to work.
≥It is not possible to operate the unit from the connected DV
equipment.
≥The DV input on this unit is for use with DV equipment only. (It
cannot be connected to a computer, etc.)
≥The DV equipment name may not be shown correctly.
≥Depending on the DV equipment, the images or audio may not
be input properly.
≥The date and time information on the tape in the DV equipment
will not be recorded.
≥You cannot recording and play simultaneously.
may be a slight delay (approx. 1 second) between pressing
[ENTER] and recording starting. To ensure you record
everything you want, start recording slightly earlier.
If the DV automatic recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on.
If that does not work, follow the instructions for “Recording
from an external device” (l 57).
27
VQT0R73
Recording
DVD
∫ Using VCR Plus_ system
DVD/VHS POWER
TV
POWER
®
Entering the PlusCode numbers is an easy way of scheduled
recording. You can find these codes in TV listings in newspapers and
magazines.
Í
VOLUME
CH
INPUT SELECT TV/VIDEO
OPERATION
SELECT
≥When connecting a cable TV box or satellite receiver, the VCR
Plusi system does not work. Program the scheduled recording
manually (l 29).
VHS
DVD
TRACKING/V-LOCK
DVD
Numbered
buttons
[1] Press [VCR Plus_].
AUDIO
VCR Plus+
Remaining Recording Time
VHS 1:43 SP
DVD 1:43 SP
VCR Plusi
CANCEL/RESET
VCR Plus+
CM SKIP
11/15 Tue 8:34 PM
SLOW/
SKIP/INDEX
REW SEARCH FF
PLAY
∫
[2] Press the numbered buttons to enter the
PlusCode number.
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
[3] Press [ENTER].
3, 4, 2, 1
ENTER
SCHEDULED
RECORDING
Remaining Recording Time
VHS 1:43 SP
DVD 1:43 SP
11/15 Tue 8:34 PM
SUB MENU
RETURN
TIME SLIP
S
Channel
39
Date
On
Off
Drive
DVD
Mode
SP
11/29 Tue
10:00 PM
11:00 PM
SCHEDULE
DISPLAY
STATUS
JET REW
Title Name
SCHEDULE
REC MODE
Press ENTER to store new schedule
REC
REC MODE DVD ERASE ADD/DLT
CREATE
≥Confirm the program and correct it if necessary using [3, 4,
COPYING
VHS
VCR/TV
CHAPTER
DVD
≥When “XP” is displayed in the unit’s display, the recording
mode automatically changes to “FR” in order to prevent loss of
recording when there is not enough space. Change to “XP”
mode if you want to set scheduled recording using “XP” mode.
≥“Invalid Entry” is displayed when you enter the wrong PlusCode
number. Reenter the PlusCode number.
≥To enter the name of the program
Press [2, 1] to select “Title Name” and press [ENTER]
(l 32).
[RAM] [-R] [-RW‹V›] [+R]
Preparation
≥Press [DVD].
Cautions for using scheduled recording
on DVD
∫Scheduled recording automatically starts at the set
time.
[4] If the program is correct
About 1 minute before the scheduled recording starts, the unit
switches on. When it finishes, the unit switches back off. If another
program is also being played back, the unit does not switch back
off.
Press [ENTER].
≥Make sure that the scheduled recording has been programmed
correctly on the SCHEDULED LIST screen (l 29).
≥Repeat steps 1–4 to program other recordings.
[5] Press [SCHEDULE].
≥The message “Turn recorder off for Scheduled Recording.” is
shown on the TV.
∫Scheduled recording cannot be activated on both DVD
and VHS at the same time.
Make sure the scheduled recording start times do not overlap on
both DVD (l 29) and VHS (l 51) Scheduled Recording List
screens.
[6] Press [Í, DVD/VHS POWER].
≥Scheduled recording can be started only when the unit is
turned off.
≥The unit turns off and “ ” lights on the unit’s display to indicate
scheduled recording standby has been activated.
When the scheduled recording settings overlap:
scheduled recording of the last one set has priority.
∫To release the unit from scheduled recording standby
Press [Í, DVD/VHS POWER].
The unit turns on and “ ” goes out.
≥Be sure to press [Í, DVD/VHS POWER] to return the unit to
standby mode before the scheduled recording time. Scheduled
Scheduled Recording
You can enter up to 16 programs a month in advance.
Preparation
recording will work only if “ ” is displayed.
≥Release protection (disc l 30, cartridge l 30) [RAM].
≥Insert a disc (l 8) and confirm there is sufficient empty space for
recording on it (l 45).
∫To stop recording while a program is working
[1] Press [DVD]
≥Check that the clock is set to the correct time.
[2] Press [∫, STOP], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the main unit for 3 or more
seconds to stop recording.
Note
Refer to Note in Manual programming (l 29).
28
VQT0R73
Recording
DVD
≥“ ” flashes when the unit cannot perform scheduled recording
carefully.
∫ Manual programming
≥When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before scheduled
recording starts.
≥The actual time recorded may be longer than the program itself
when TV programs are recorded using VCR Plus_ system.
≥When recording more than one program in a row, for DVD-RAM the
first few seconds, and for DVD-R, DVD-RW (DVD-Video format) or
+R about the first 30 seconds of all programs from the second one
onwards will not be recorded.
≥If you set “DST” (Daylight Saving Time) to “On” when manually
setting the clock (l 44), scheduled recording may not work when
summer switches to winter and vice versa.
[1] Press [SCHEDULE].
≥Make sure “New Scheduled Recording” is selected.
SCHEDULE
LIST
Remaining Recording Time
VHS 1:43 SP
DVD 1:43 SP
11/15 Tue 8:34 PM
New Scheduled
Recording is selected.
No
01
Channel
39
Date
On
Off
Drive Mode
SP
Check
OK
11/29 Tue
10:00 PM 11:00 PM DVD
New Scheduled Recording
[2] Press [ENTER], then move and change the
Check, change or delete programs
items using [3, 4, 2, 1].
Even when the unit is turned off, you can display the scheduled
recording list by pressing [SCHEDULE].
SCHEDULED
RECORDING
Remaining Recording Time
VHS 1:43 SP
DVD 1:43 SP
11/15 Tue 8:34 PM
[1] Press [SCHEDULE].
Channel
Date
On
:
Off
:
Drive
Mode
Title Name
SCHEDULE
LIST
Remaining Recording Time
VHS 1:43 SP
DVD 1:43 SP
11/15 Tue 8:34 PM
Press ENTER to store new schedule
No
Channel
Date
On
Off
Drive Mode
Check
New Scheduled Recording
≥You may use the numbered buttons to enter “Channel”, “Date”,
“On”, and “Off”.
B
A
≥Channel (Program Position/TV Station Name)
≥Date
Icon explanations (A)
¥ Currently recording
You can also make a daily or weekly program.
≥On (start time)/Off (finish time)
The time increases or decreases in 30-minute increments if
you hold down the button.
≥Drive (Recording drive)
Select recording drive to “DVD”.
≥Mode (Recording mode)
You can also press [REC MODE] to change the recording
mode.
XP,.SP,.LP,.EP,.FR,.XP... (l 24)
≥Title Name
Press [2, 1] to select “Title Name” and press [ENTER]
(l 32).
W
Programs are overlapped. Recording of the program with the
later start time starts when the earlier program finishes
recording.
n
F
X
You stopped a weekly or daily scheduled recording. The icon
disappears when the next scheduled recording starts.
The disc was full. (not enough space)
The TV program may not be recorded due to copy-protection.
Recording stopped (Dirty disc, etc.)
Check (B)
OK:
Recordable
# (Date): The last day of daily or weekly recording.
!:
It may not be possible to record because:
≥the disc is write-protected
≥there is no more space left
≥the number of possible titles has reached its maximum.
Overlap: When the date and time overlap with another scheduled
[3] Press [ENTER] when you have finished making
changes.
≥“Invalid Entry” is displayed when you enter the wrong item.
Reenter the item.
recording, only a part of the program can be recorded.
– –:
Scheduled recording for VHS.
≥Make sure that the scheduled recording has been programmed
correctly on the SCHEDULE LIST screen (l right).
≥To continue programming:
[2] Press [3, 4] to select the program.
≥You may also select program by inputting a 2-digit number
using the numbered buttons.
Select “New Scheduled Recording” and repeat steps 2–3.
e.g.:
“5”: [0] )[5]
“15”: [1] )[5]
[4] Press [SCHEDULE].
≥The message “Turn recorder off for Scheduled Recording.” is
shown on the TV.
≥Press [2, 1] to move to the preceding or following page.
[3] Press [CANCEL/RESET, ¢] to delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
[5] Press [Í, DVD/VHS POWER].
≥Scheduled recording can be started only when the unit is
turned off.
The scheduled recording setting screen appears.
≥The unit turns off and “ ” lights on the unit’s display to indicate
scheduled recording standby has been activated.
[4] If you pressed [ENTER] in step 3,
Use [3, 4, 2, 1] to change and press [ENTER].
∫To release the unit from scheduled recording standby
Press [Í, DVD/VHS POWER].
[5] Press [SCHEDULE].
≥The message “Turn recorder off for Scheduled Recording.” is
shown on the TV.
The unit turns on and “ ” goes out.
≥Be sure to press [Í, DVD/VHS POWER] to return the unit to
standby mode before the scheduled recording time. Scheduled
∫To put the unit on scheduled recording standby
Press [Í, DVD/VHS POWER].
recording will work only if “ ” is displayed.
≥The unit turns off and “ ” lights on the unit’s display to indicate
scheduled recording standby has been activated.
∫To stop recording while a program is working
[1] Press [DVD]
[2] Press [∫, STOP], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the main unit for 3 or more
seconds to stop recording.
For your reference
≥Programs that failed to record are not deleted from the list
immediately (indicated in gray), but are deleted from the list
automatically at 4 a.m. 2 days later.
≥During scheduled recording, you can change the end time as long
as the recording mode is not “FR”.
Note
≥When the unit is carrying out a scheduled recording, you can utilize
playback. [RAM]
29
VQT0R73
Editing
DVD
1 Disc Name
[RAM] [-R] [-RW‹V›] [+R]
DVD/VHS POWER
TV
POWER
VOLUME
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
CH
INPUT SELECT TV/VIDEO
[4] Select “Disc Name” with [3, 4] and press
[ENTER].
Refer to “Entering text” (l 32).
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
≥The disc name is displayed in the FUNCTIONS window.
FUNCTIONS
FUNCTIONS DVD
DVD-RAM
123
Cartridge Pro
Disc Protecti
3, 4, 2
ENTER
SUB MENU
TIME SLIP
≥With a finalized DVD-R, DVD-RW (DVD-Video format) and +R, the
name is displayed on the Top Menu.
S
RETURN
SCHEDULE
DISPLAY
STATUS
JET REW
1 Disc Protection
[RAM]
DISC MANAGEMENT
[RAM] [-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
This allows you to protect the whole disc from accidental erasure and
release disc protection.
Preparation
≥Release protection (disc l right, cartridge l right). [RAM]
≥Insert a disc (l 8).
≥Press [DVD].
[4] Select “Disc Protection” with [3, 4] and press
[ENTER].
[5] Select “Yes” with [2] and press [ENTER].
≥To protect
e.g., DVD-RAM
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other
Functions” with [3, 4]
and press [ENTER].
[3] Select “DISC
MANAGEMENT” with
[3, 4] and press
[ENTER].
FUNCTIONS DVD
DVD-RAM
Disc Protection
DISC
Cartridge Protection Off
Disc Protection Off
MANAGEMENT
Titles
Used
7
Free
0 : 42 (SP)
Playback
DIRECT NAVIGATOR
PLAYLUISTS
Setup disc protection.
DVD-RAM
0 : 58
FLEXIBLE RECORDING
DV AUTO RECORDING
Note: Protected discs cannot be renamed
or have their contents changed,
but can still be re-formatted.
Schedule
SCHEDULE
VCR Plus+
SETUP
2
1
3
DISC MANAGEMENT
Disc Name
Disc Protection
Erase All Titles
Format Disc
On
Yes
No
Other Functions
Return
ENTER
ENTER
≥To release protection
e.g., DVD-RAM
e.g., DVD-R
Disc Protection
DISC
MANAGEMENT
DISC
DISC
Titles
Used
7
Free
0 : 42 (SP)
MANAGEMENT
DVD-RAM
MANAGEMENT
DVD-R
Cancel disc protection.
Note: All write restrictions will
be released.
Titles
Used
7
Free
0 : 42 (SP)
Titles
Used
7
Free
0 : 42 (SP)
DVD-RAM
0 : 58
0 : 58
0 : 58
Disc Name
Disc Protection
Erase All Titles
Format Disc
Disc Name
Disc Protection
Erase All Titles
Format Disc
Disc Name
Off
Off
Playback will start with: Top Menu
Finalize
Yes
No
ENTER
ENTER
ENTER
[4] Use [3, 4] to select a desired item and press
∫Protection of cartridge disc
You can protect the contents of your discs.
≥With the write-protect tab in the protect
position, you cannot record to, edit, or erase
from the disc.
[ENTER].
You can change various settings.
≥After this operation, follow the desired operation.
PROTECT
∫To stop in the middle
Press [RETURN].
1 Erase All Titles
[RAM]
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
Once erased, the recorded contents are lost and cannot be restored.
Make certain before proceeding.
[4] Select “Erase All Titles” with [3, 4] and press
[ENTER].
[5] Select “Yes” with [2] and press [ENTER].
[6] Select “Start” with [2] and press [ENTER].
≥A message appears when finished.
[7] Press [ENTER].
Note
≥Erasing all video titles will result in all playlists also being erased.
≥Erase does not work if one or more titles are protected.
30
VQT0R73
Editing
DVD
1 Format Disc
1 Finalize
[RAM] [-RW‹V›] [-RW‹VR›]
[-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
≥Make selection from “Playback will start with:” before finalizing the
disc. (l below left)
Formatting erases all contents (including computer data), and
they cannot be restored. Check carefully before proceeding.
The contents are erased when you format a disc even if you have
set protection.
You can play DVD-R, DVD-RW (DVD-Video format) or +R on
compatible DVD players by finalizing it on the unit, effectively making
it into DVD-Video that complies with DVD-Video standards.
The menu you create with the unit can also be used on DVD players.
[4] Select “Format Disc” with [3, 4] and press
[ENTER].
[4] Select “Finalize” with [3, 4] and press
[ENTER].
[5] Select “Yes” with [2] and press [ENTER].
Format Disc
[5] Select “Yes” with [2] and press [ENTER].
e.g., DVD-RAM
Finalize
Formatting the disc will erase all contents.
This will take approximately 1 minute.
Do you want to continue?
Finalizing will take approximately
Do you want to continue? (Required for
playback on compatible DVD players.)
≤
minutes.
Yes
No
Yes
No
[6] Select “Start” with [2] and press [ENTER].
Format Disc
[6] Select “Start” with [2] and press [ENTER].
Finalize
Protected contents will also be erased.
Are you sure you want to continue?
Finalizing is necessary to enable playback
of the disc on compatible DVD players.
You will be unable to record on this disc
once it is finalized.
Start
Cancel
Are you sure you want to continue?
Start
Cancel
≥Formatting starts.
≥A message appears when formatting is finished.
≥Finalizing starts.
Note
≥You cannot cancel finalizing.
≥Formatting normally takes a few minutes; however it may take
up to a maximum of 70 minutes. ([RAM])
≥A message appears when finalizing is finished.
Note
≥Do not disconnect the AC power supply cord while
formatting. This can render the disc unusable.
≥Finalizing takes about 15 minutes.
≥Do not disconnect the AC power supply cord while
finalizing. This can render the disc unusable.
[7] Press [ENTER].
[7] Press [ENTER].
To stop formatting [RAM]
Press [RETURN].
≥You can cancel formatting if it takes more than 2 minutes. The disc
must be reformatted if you do this.
Note
≥You can only finalize DVD-R, DVD-RW (DVD-Video format) or +R
that were recorded on the unit.
Note
≥When finalizing a high-speed recording compatible disc, it may take
longer than displayed on the confirmation screen (approximately
4 times).
≥When a disc has been formatted using this unit, it may not be
possible to use it on any other equipment.
≥You can format DVD-RW only as DVD-Video format on this unit.
≥The disc cannot be formatted if the write protect tab (l 30) is
switched to “PROTECT”. Release the protection to continue.
≥The message “Unable to format” appears when trying to format
discs the unit cannot use.
≥After finalizing
- The disc becomes play-only and you can no longer record or edit
it. [-R] [+R]
- You can record and edit the disc after formatting (l left) although
it becomes play-only after finalizing. [-RW‹V›]
- DVD-R, DVD-RW (DVD-Video format) or +R finalized on the unit
may not be playable on other players depending on the condition
of the recording.
1 Playback will start with:
- There is a pause of several seconds between titles during play.
- Titles are divided into about 5-minute chapters°.
° This time varies greatly depending on the condition and mode
of recording.
[-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
Select whether to show the top menu after finalizing the disc. Do this
before finalizing the disc.
≥Visit Panasonic’s homepage for more information about DVDs.
[4] Select “Playback will start with:” with [3, 4]
and press [ENTER].
[5] Use [3, 4] to select a desired item and press
For U.S.A.:
http://www.panasonic.com/playDVD-R
[ENTER].
Playback will start with:
Top Menu
First Title
≥Top Menu: The top menu appears first.
≥First Title: The disc content is played without displaying the
top menu.
31
VQT0R73
Editing
DVD
[2] Use [3, 4, 2, 1] to select the character you
want to enter and press [ENTER].
Repeat this step to enter other characters.
DVD/VHS POWER
TV
POWER
≥To erase a character
VOLUME
CH
INPUT SELECT TV/VIDEO
You can move back one space by pressing [;, PAUSE].
- You can also erase the characters by pressing [2] after you
move the cursor to the Name field by pressing [3, 4].
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
≥Using the numbered buttons to enter characters
Numbered
buttons
e.g., entering the letter “R”.
5
6
7
8
J
K
N
Q
U
L
O
R
V
AUDIO
7
7
(1)Press [7] to move to the 7th row.
(2)Press [7] twice to highlight “R”.
(3)Press [ENTER].
7
M
P
T
CANCEL/RESET
VCR Plus+
CM SKIP
S
SLOW/
SKIP/INDEX
REW SEARCH FF
≥To enter space
:, 9
PLAY
Press [CANCEL/RESET, ¢] and press
[ENTER].
∫
;
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
[3] After you have finished naming
DIRECT NAVIGATOR
Press [∫, STOP].
The title is entered and the screen disappears.
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
∫To cancel in the middle
Press [RETURN].
≥Characters will not be saved.
S
RETURN
SUB MENU
SCHEDULE
DISPLAY
STATUS
JET REW
For your reference
If you enter a long name, only part of it is shown in the TOP MENU
after finalization (l 31). When entering a title name, the name that
will appear in the TOP MENU can be previewed in “Top Menu
Preview (Finalized Disc)” window. [-R] [-RW‹V›] [+R]
Entering text
[RAM] [-R] [-RW‹V›] [+R]
You can give names to recorded titles, etc.
The maximum number of characters:
[RAM]
Characters
≥Title
64
44
64
≥Title (scheduled recording)
≥Disc
[-R] [-RW‹V›] [+R]
≥Title
≥Disc
Characters
44
40
Note
Preparation
≥Insert a recorded disc.
≥Release protection (Disc l 30, title l 34, cartridge l 30). [RAM]
≥Press [DVD].
[1] Show Enter Name screen.
Refer to the following pages regarding display of the Enter Name
Screen.
≥Title
(l 34)
≥Title (scheduled recording)
≥Disc
(l 28, 29)
(l 30)
Name field: shows the text you have entered
Title Name
_
1
2
3
4
5
6
7
8
9
0
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
,
3
C
F
I
4
5
a
6
b
e
7
c
f
8
i
/
9
j
l
$
0
d
g
j
%
&
h
k
i
fl
O
[
L
O
R
V
Y
?
l
N
]
@
_
;
π
Erase
Set
m
n
o
M
P
T
S
p
t
q
u
x
'
r
s
{
(
)
-
v
}
W
.
Z
!
w
"
y
:
z
;
|
\
^
`
Space
ENTER
32
VQT0R73
Editing
DVD
Using the Direct Navigator
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
∫ Editing titles with SUB MENU button
Press [DIRECT NAVIGATOR] and the list of titles recorded (Title
View) is shown. You can play and edit a desired title.
Note
≥Once erased, divided or shortened, the title cannot be restored to
its original state. Make certain before proceeding.
For your reference
≥You cannot edit during recording or transferring (dubbing), etc.
≥The maximum number of items on a disc:
Preparation
- Title:
99 ([+R] 49 titles)
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].
- Chapter: Approximately 1000 ([+R] Approximately 254)
(Depends on the state of recording.)
[1] Press [DIRECT NAVIGATOR].
Erase Title
∫ Selecting recorded titles to play
Preparation
≥Insert a disc that has been recorded on.
≥Press [DVD].
[2] Use [3, 4, 2, 1] to select a desired
Properties
Edit Title
title.
≥“To show other pages”, l below
View Chapters
[3] Press [SUB MENU].
[1] Press [DIRECT NAVIGATOR].
[4] Use [3, 4] to select a desired item
and press [ENTER].
DIRECT NAVIGATOR Title View
DVD-RAM
-
-
≥After this operation, follow the desired operation.
07
08
10 11/21 Mon
8
11/21 Mon
∫To stop in the middle
-
-
-
-
-
-
Press [RETURN].
For your reference
Previous
Page 02/02
Next
≥When the title is protected (l 34), some items are not accessible.
Release the protection to access the inaccessible items. [RAM]
Play
Select Previous
Next
SUB MENU
[2] Use [3, 4, 2, 1] to select the title you want to
1 Erase Title
[RAM] [-R] [-RW‹V›] [+R] (Multiple editing is possible. l below)
watch and press [ENTER].
≥Play starts.
≥You can also select titles by entering a 2-digit number with the
numbered buttons.
≥Follow steps 1 to 3 of “Editing titles with SUB MENU button”.
Once title is erased using this procedure, it cannot be retrieved.
Check the title carefully before erasing to ensure it isn’t one you want
to keep.
e.g.:
“5”: [0] )[5]
“15”: [1] )[5]
≥If you enter a number larger than the total number of titles, the
last title is selected.
≥“To show other pages” l lower right
e.g.: DVD-RAM
[4] Select “Erase Title” with
Erase Title
[3, 4] and press
Time remaining after erase 0 : 58(SP)
[ENTER].
[5] Select “Erase” with [2]
Corresponding playlist chapters will be erased.
∫To clear the title list
Erase
Cancel
Press [RETURN].
and press [ENTER].
ENTER
For your reference
≥Direct Navigator screen icons
For your reference
≥The disc’s available recording time may not increase after erasing
short titles.
: Title protected
t: Unable to play
≥The available recording space on DVD-R or +R does not increase
when you erase titles.
≥Available recording space on a DVD-RW (DVD-Video format)
increases only when the last recorded title is erased. It does not
increase if other titles are erased.
¥: Currently recording
: Title with “One time only recording” restriction (l 58, CPRM)
1 Properties
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
≥Follow steps 1 to 3 of “Editing titles with SUB MENU button”.
Title information (e.g., date and
time) is shown.
[4] Select “Properties” with
[3, 4] and press
[ENTER].
Properties
Football
01
No.
Date
Ch.
Start
11:02 PM
(
)
11/ 8/2005 Tue
Rec.Time
1:00 SP
12
ENTER
Various operations
∫To show other pages
Press [3, 4, 2, 1] to select “Previous” or “Next” and press
[ENTER].
≥You can also press [:, SKIP] or [9, SKIP] to show other
pages.
∫Multiple editing
Select with [3, 4, 2, 1] and press [;, PAUSE]. (Repeat)
A check mark appears. Press [;, PAUSE] again to cancel.
33
VQT0R73
Editing
DVD
11 Setup Protection/Cancel Protection
[RAM] (Multiple editing l 33)
DVD/VHS POWER
TV
POWER
≥Follow steps 1 to 3 of “Edit Title”.
VOLUME
CH
INPUT SELECT TV/VIDEO
You can prevent accidental erasure of titles by setting and canceling
the write-protection.
OPER
SELECT
ATION
VHS
DVD
DVD
TRACKING/V-LOCK
[4] Select “Setup Protection” or “Cancel
Protection” with [3, 4] and press [ENTER].
[5] Select “Yes” with [2] and press [ENTER].
SLOW/
SKIP/INDEX
REW SEARCH FF
PLAY
:, 9
1
Setup Protection
DIRECT NAVIGATOR
DVD-RAM
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
Set title protection.
DIRECT NAVIGATOR
07
Set up Protection:
The padlock mark
appears.
Yes
No
3, 4, 2, 1
10 11/21 Mon
- -
ENTER
ENTER
SUB MENU
TIME SLIP
Cancel Protection
DIRECT NAVIGATOR
S
SUB MENU
RETURN
DVD-RAM
Cancel title protection.
Yes No
07
SCHEDULE
DISPLAY
STATUS
JET REW
Cancel Protection:
The padlock mark
disappears.
10 11/21 Mon
- -
ENTER
1 Edit Title
[RAM] [-R] [-RW‹V›] [+R]
For your reference
Titles will be erased even if they are protected if you format the disc
with DISC MANAGEMENT (l 31).
You can perform various kinds of title editing.
Preparation
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].
11 Change Thumbnail
[1] Press [DIRECT NAVIGATOR] and use [3, 4, 2,
[RAM] [-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “Edit Title”.
1] to select a desired title.
≥“To show other pages” l 33
≥“Multiple editing” l 33
You can change the image to be shown as a thumbnail picture in the
Title View.
DIRECT NAVIGATOR Change Thumbnail
[4] Select “Change
[2] Press [SUB MENU].
e.g.: DVD-RAM
DVD-RAM
Thumbnail” with
[3, 4] and press
[ENTER].
;
Change
Title Name
[3] Select “Edit Title” with [3, 4] and
press [ENTER].
[4] Use [3, 4] to select a desired item
Setup Protection
Cancel Protection
Change Thumbnail
Exit
0:00.00
[5] Press [1, PLAY] to
play.
Start play and select
the thumbnail position.
Change
0:00.00
and press [ENTER].
≥
The editing screen for the selected item appears.
ENTER
[6] Press [ENTER] at the
point you want to
display.
∫To return to the previous screen
Press [RETURN].
(l 35, “For quicker editing”)
∫To exit the screen
Press [RETURN] several times.
≥To change to another point in the same title:
- Select “Change” with [3, 4] and press [1, PLAY] and then
repeat step 6.
11 Title Name
[7] Select “Exit” with [3, 4] and press [ENTER].
[RAM] [-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “Edit Title”.
≥The thumbnail picture will be changed at this point.
[4] Select “Title Name” with [3, 4] and press
[ENTER].
Refer to “Entering text”. (l 32)
34
VQT0R73
Editing
DVD
11 Create Chapter
1 View Chapters
[RAM]
≥Follow steps 1 to 5 of “View Chapters”.
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
[1] Press [DIRECT NAVIGATOR] and use [3, 4, 2,
1] to select a desired title.
[6] Select “Create Chapter” with [3, 4] and press
[ENTER].
≥“To show other pages” l 33
[7] Press [ENTER] at the point you want to divide.
[2] Press [SUB MENU].
[3] Select “View Chapters” with [3, 4]
and press [ENTER].
(l below, “For quicker editing”)
e.g.: DVD-RAM
≥Repeat this step to divide at other points.
Erase Chapter
Create Chapter
Combine Chapters
DIRECT NAVIGATOR Create Chapter
DVD-RAM
[4] Select a desired chapter with
[3, 4, 2, 1].
08
PLAY
Create
≥To start play l Press [ENTER].
≥To edit l Follow the steps below.
View Titles
Exit
0:43.21
[5] Press [SUB MENU].
[6] Select a desired item with [3, 4] and press
[8] Select “Exit” with [4] and press [ENTER].
[ENTER].
≥A short portion of the recording just after the creation point may be
lost.
Title/Chapter
Programs are recorded as a single title consisting of one chapter.
Title
For your reference
≥It is not possible to carry out “Create” when the resulting part(s) are
extremely short.
Chapter
Start
End
11 Combine Chapters
You can divide a title into multiple chapters. [RAM]
(l 21, “Create chapters”, l right “Create Chapter”)
Title
[RAM]
≥Follow steps 1 to 5 of “View Chapters”.
[6] Select “Combine Chapters” with [3, 4] and
press [ENTER].
Chapter
Chapter
Chapter
Chapter
[7] Select “Combine” with [2] and press [ENTER].
≥The selected chapter and next chapter are combined.
≥Titles are divided into chapters about 5 minutes after finalizing
(l 31). [-R] [-RW‹V›] [+R]
Combine Chapters
Selected Chapter
Following Chapter
001
002
11 Erase Chapter
Combine chapters
Combine
Cancel
[RAM] (Multiple editing l 33)
≥Follow steps 1 to 5 of “View Chapters”.
ENTER
Once erased, the recorded contents are lost and cannot be
restored. Make certain before proceeding.
11 View Titles
≥When you erase a chapter, the title may also be erased.
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
≥Follow steps 1 to 5 of “View Chapters”.
[6] Select “Erase Chapter” with [3, 4] and press
[ENTER].
[ENTER].
[7] Select “Erase” with [2] and press [ENTER].
Erase Chapter
You go back to Title View.
Erase chapter from the title?
Corresponding playlist chapters will also be erased.
Erase
Cancel
For quicker editing
≥Use search (l 20), Time Slip (l 21) or slow-motion (l 20) to
find the desired point.
≥Press [:, SKIP] or [9, SKIP] to skip to the beginning or
end of a title.
35
VQT0R73
Editing
DVD
∫To exit the screen
Press [RETURN] several times.
DVD/VHS POWER
TV
POWER
For your reference
≥You can use fast-forward, fast-rewind, pause, and slow-motion
VOLUME
CH
INPUT SELECT TV/VIDEO
while playing chapters just as you can during normal play.
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
Numbered
buttons
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
SLOW/
SKIP/INDEX
REW SEARCH FF
PLAY
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
FUNCTIONS
RETURN
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
S
SUB MENU
SCHEDULE
DISPLAY
STATUS
JET REW
Playing playlists
[RAM] [-RW‹VR›] (Play only)
Note
≥You cannot create or edit playlists on this unit. However, you can
play a playlist that has been created or edited on a different
equipment.
Preparation
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [3, 4] and press
[ENTER].
[3] Select “PLAYLISTS” with [3, 4] and press
[ENTER].
PLAYLISTS
Playlist View
08
DVD-RAM
07
-
-
-
-
11/21 Mon 0:30
11/21 Mon 0:01
-
-
-
-
Previous
Page 02/02
Next
Previous
Play
SUB MENU
Next
[4] Use [3, 4, 2, 1] to select a playlist and press
[ENTER].
≥Chapters are not displayed if you have not yet created a playlist
with the disc.
≥You can also select a playlist from the Playlist View by entering
a 2-digit number with the numbered buttons.
e.g.:
“5”: [0] )[5]
“15”: [1] )[5]
≥If you enter a number larger than the total number of playlists,
the last playlist is selected.
≥“To show other pages” l 33
Press [∫, STOP]. (The Playlist View screen appears.)
∫To return to the previous screen
Press [RETURN].
36
VQT0R73
Editing
DVD
∫ Other functions for playlists
[RAM] [-RW‹VR›] (Properties only)
Preparation
≥Press [DVD].
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [3, 4] and press
[ENTER].
[3] Select “PLAYLISTS” with [3, 4] and press
[ENTER].
[4] Use [3, 4, 2, 1] to select a
Properties
playlist.
≥“To show other pages” l 33
View Chapters
[5] Press [SUB MENU].
[6] Use [3, 4] to select a desired item and press
[ENTER].
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN] several times.
1 Properties
[RAM] [-RW‹VR›]
≥Follow steps 1 to 5 of “Other functions for playlists”.
[6] Select “Properties” with [3, 4] and press
[ENTER].
Playlist information (e.g., date and length) is shown.
Properties
Dinosaur
No.
Chapters
03
004
Date
Length
11/15/2005 Tue
0:05.51
ENTER
1 View Chapters
[RAM] [-RW‹VR›] (Play only)
≥Follow steps 1 to 5 of “Other functions for playlists”.
You can play the chapters in a playlist.
[6] Select “View Chapters” with [3, 4] and press
[ENTER].
[7] Use [3, 4, 2, 1] to select a desired chapter.
≥You can also select a chapter from the chapter view by
entering a 3-digit number with the numbered buttons.
e.g.:
“5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
≥If you enter a number larger than the total number of chapters,
the last chapter is selected.
≥“To show other pages” l 33
∫Back to Playlist View
[8] Press [SUB MENU] and then press
View Playlists
[ENTER].
∫To stop chapter play
Press [∫, STOP]. (The Chapter View screen appears.)
37
VQT0R73
Convenient functions
DVD
Using DISPLAY menus
∫ Common procedures
Preparation
DVD/VHS POWER
TV
POWER
≥Press [DVD].
VOLUME
CH
INPUT SELECT TV/VIDEO
[1] Press [DISPLAY].
OPERATION
SELECT
Disc
Play
Video
Audio
VHS
DVD
Î Digital 2/0ch
1
Soundtrack
DVD
TRACKING/V-LOCK
Off
Subtitle
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
Stereo
Audio channel
Other
3, 4, 1
SUB MENU
RETURN
Menu
Item
Setting
S
TIME SLIP
JET REW
[2] Select a menu with [3, 4] and press [1].
SCHEDULE
DISPLAY
STATUS
[3] Select an item with [3, 4] and press [1].
DISPLAY
REC
REC MODE DVD ERASE ADD/DLT
CREATE
[4] Select a setting with [3, 4].
≥Different operations are required depending on settings. Follow
the on-screen instructions.
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
∫To exit the screen
Press [DISPLAY].
For your reference
≥The screens depend on the disc contents.
≥Depending on the condition of the unit (playing, stopped, etc.) and
the type of software you are playing, there are some items that you
cannot select or change.
1 Disc menu
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD]
PBC (Playback control) [VCD] (l 58)
Indicates whether menu play (playback control) is on or off.
Disc
Play
Video
Audio
Other
Î Digital 2/0ch
Off
Stereo
1
Soundtrack
Subtitle
[A] Sound track/Subtitle language
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR: Korean
MAL: Malay
Audio channel
VIE:
Vietnamese
Soundtrack
THA: Thai
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
The disc’s audio attributes appear.
¢:
Others
[DVD-V]
[B] Audio attributes
Select the audio and language. (See [B] Audio attributes)
LPCM/PPCM/Î Digital/DTS/MPEG: Signal type
k (kHz):
b (bit):
ch (channel):
Sampling frequency
Number of bits
Number of channels
Subtitle
[DVD-V]
Turn the subtitle on/off and select the language (See [A] Sound
track/Subtitle language)
For your reference
≥The display changes according to the disc content. You cannot
make a change when there is no recording.
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›] (Only discs that contain subtitle
on/off information)
≥Some discs allow changes to sound tracks, subtitles, and angles
only by using the disc’s setup menus. (l 20)
Turn the subtitle on/off.
≥Subtitle on/off information cannot be recorded using this unit.
≥If the subtitles overlap the closed captions recorded on discs,
turn the subtitles off.
Audio channel [RAM] [-RW‹VR›] [VCD]
l 21, Changing audio during play
Angle [DVD-V]
Change the number to select an angle.
38
VQT0R73
Convenient functions
DVD
1 Play menu
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
[DVD-V]
Title,.Chapter,.Off
^------------------------J
Disc
Play
Off
Repeat play
[VCD] [CD] (except MP3 discs)
Track,.All,.Off
Video
Audio
Other
^----------------J
[CD] (MP3 discs only)
Track,.Group,.Off
^-----------------------J
Repeat play
This function works only when the elapsed play time is
displayed.
Select the item for repeat play. Depending on the disc, the items
that can be selected will differ.
While playing a playlist
[RAM]
Playlists,.Off
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
Title,.Off
1 Video menu
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD]
°Transfer (When “Progressive” is set to “On”)
Select the method of conversion for progressive output to suit
the type of material being played (l 58, Film and Video).
Auto1 (normal):
Detects 24 frame-per-second film content and
appropriately converts it.
Auto2: Select when the video content is distorted by using
Auto1.
Disc
Play
Video
Audio
Other
Normal
On
Picture
MPEG-DNR
Progressive
Line-in NR
On
Auto 1
Off
Transfer
Picture
To select the picture mode during play
Normal: Default setting
Cinema: Mellows movies, enhances detail in dark scenes.
Line-in NR (Only when IN1 or IN2 is selected)
Reduces video tape noise during transfer (dub).
Depending on the software, jittering may occur.
Off:
Noise reduction is off. Select when you want to record
input as is.
Noise reduction works for any video input.
MPEG-DNR
Reduces noise and picture degradation.
On()Off
On:
°Progressive (l 58)
° Only when you have selected “480p” in “TV Type” (l 19).
Select “On” to enable progressive output.
≥Select “Off” if the picture is stretched horizontally.
≥When progressive output is on, closed captions cannot be
displayed.
On()Off
1 Audio menu
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›]
Note
Disc
Play
Video
Audio
Other
≥Turn V.S.S. off if it causes distortion.
≥Turn V.S.S. off for SAP recordings.
Off
Off
V.S.S.
Dialog Enhancer
Dialog Enhancer
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›]
(Dolby Digital, 3-channel or over only, including a center
channel)
V.S.S.
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›]
The volume of the center channel is raised to make dialog easier
(Only for Dolby Digital with 2.0 or more channels)
to hear.
Enjoy a surround-sound effect if you are using 2 front speakers
(L/R) only.
On()Off
Natural()Emphasis()Off
^------------------------------------------J
1 Other menu
Position
Disc
Play
Video
Audio
Other
To change the display position
1 (Standard) –5:
The higher the setting the lower the screen moves.
1
Position
39
VQT0R73
Convenient functions
DVD
Entering a password (Ratings)
DVD/VHS POWER
TV
POWER
You can limit play of DVDs unsuitable for some audiences (children,
for example). Play and changes to the settings are not possible
unless you enter a password. (l 41)
VOLUME
CH
INPUT SELECT TV/VIDEO
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
Preparation
≥Press [DVD].
Numbered
buttons
When setting ratings
The password screen is shown when you select levels 0 to 7.
[1] Input a 4-digit password with the numbered
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
buttons.
SLOW/
SKIP/INDEX
REW SEARCH FF
≥If you enter a wrong number, press [2] to erase it before you
press [ENTER].
PLAY
≥Do not forget your password.
[2] Press [ENTER].
[3] Press [ENTER].
The password is entered and the unit is locked.
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
FUNCTIONS
RETURN
3, 4, 2, 1
Now, when you insert a DVD-Video that exceeds the ratings limit you
set, a message appears on the TV.
Follow the on-screen instructions.
ENTER
SUB MENU
RETURN
TIME SLIP
S
When changing ratings
SCHEDULE
DISPLAY
STATUS
JET REW
The password screen is shown when you select “Ratings”. (l 41)
[1] Input a 4-digit password with the numbered
Changing the unit’s settings
buttons and press [ENTER].
Use the following procedure to change the settings if necessary.
Unlock Recorder: To unlock the unit and return the rating to 8
Change Password: To change your password
[1] While stopped
FUNCTIONS DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Change Level:
To change the rating level
Press [FUNCTIONS].
Playback
Schedule
DIRECT NAVIGATOR
PLAYLISTS
Temporary Unlock: To temporarily unlock the unit (the unit locks
again if you switch it to standby or open the
disc tray)
FLEXIBLE RECORDING
DV AUTO RECORDING
[2] Select “Other
SCHEDULE
VCR Plus+
SETUP
2
1
3
DISC MANAGEMENT
Functions” with [3, 4]
and press [ENTER].
[2] Select a desired item with [3, 4] and press
Other Functions
Return
ENTER
[ENTER].
[3] Select “SETUP” with
[3, 4] and press
[ENTER].
Actual screens depend on the operation. Follow the on-screen
instructions.
(1)
(2)
(3)
SETUP
Off Timer
6 Hours
Remote Control Code
Clock Settings
Set Code 1
Channel
Setup
Quick Start
On
(1) Menus
(2) Items
(3) Options
Disc
Restore Default Settings
Video
Audio
Display
TV Screen
VHS
[4] Select a menu with [3, 4] and press [2, 1].
[5] Select an item to be changed with [3, 4] and
press [ENTER].
[6] Select an option with [3, 4] and press
[ENTER].
≥Some options require different operations. Follow the displayed
instructions.
∫To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change is
not activated until you press [ENTER].
∫To exit the screen
For your reference
≥The settings remain intact even if you switch the unit to standby.
40
VQT0R73
Convenient functions
DVD
∫Disc
Summary of settings
This description shows the initial settings for the unit. For
Settings for Playback
Press [ENTER] to show the following settings.
details on menu operation. (l 40)
≥Underlined items are the factory default settings.
Ratings (l 40)
Set a ratings level to limit DVD-Video play.
Setting ratings (When level 8 is selected)
[8 No Limit]: All DVD-Video can be played.
≥
≥
/
indicates settings effective for DVD only.
[1] to [7]:
Prohibits play of DVD-Video with corresponding
ratings recorded on them.
∫Channel
/
[0 Lock All]: Prohibits play of all DVD-Video.
Signal Source (RF IN) (l 16)
Select to suit the type of antenna you are using.
[Antenna] [CableTV]
Changing ratings (When level 0 to 7 is selected)
[Unlock Recorder] [Change Password]
[Change Level] [Temporary Unlock]
Set Channels Automatically (l 16)
Preset Channel Captions (l 17)
Manual Channel Captions (l 17)
VCR Plusi Ch. Setting (l 16)
Audio Language
[English] [French] [Spanish] [Original] [Other ¢¢¢¢]
Subtitle Language
[Automatic] [English] [French] [Spanish] [Other ¢¢¢¢]
Menu Language
[English] [French] [Spanish] [Other ¢¢¢¢]
∫Setup
/
Off Timer
Choose the language for audio, subtitles and disc menus. [DVD-V]
≥If a language which is not recorded is selected, or if languages
are already fixed on the disc, the language set as the default on
the disc will be played instead.
Select how long the unit remains on when it is not being used.
Remote Control Code (l 18)
[Set Code 1] [Set Code 2] [Set Code 3]
Original
The original language of each disc will be selected.
Other ¢¢¢¢
This is the language code setting.
Input a code number with the numbered buttons. (l 43,
“Language code list”)
Clock Settings
Press [ENTER] to show the following settings.
Set Clock Automatically (l 44)
Set Clock Manually (l 44)
Automatic
Adjust Time Zone (l 44)
If the language selected for “Audio Language” is not available,
subtitles of that language will automatically appear if available on
the disc.
This corrects the time set in Auto Clock Setting.
The status is not displayed on the Set Up menu when the Auto
Clock Setting is not set.
[j1] [0] [i1]
Settings for Recording
Press [ENTER] to show the following settings.
Quick Start
About 1 second after turning on the unit, you can start recording to
DVD-RAM.
Recording Time in EP Mode
Select the maximum number of hours for recording in EP mode
(l 24, “Recording modes and approximate recording times”).
[EP-Extended Play (6H)] [EP-Extended Play (8H)]
Power consumption in standby mode increases when Quick Start is
set to “On”. The unit performs self maintenance for a few minutes
every morning starting at 4:00 am. The unit’s buttons, including
[POWER Í/I], do not work during this self maintenance. (Self
maintenance does not start if the unit is on, or a scheduled recording
is taking place, at this time.)
EP-Extended You can record for 6 hours on an unused 4.7 GB
Play (6H)
EP-Extended You can record for 8 hours on an unused 4.7 GB
Play (8H) disc.
disc.
[On] [Off]
Restore Default Settings
This returns SETUP menus to default settings, except for the clock,
channel settings, ratings level, and on-screen language.
[Yes] [No]
41
VQT0R73
DVD
≥ Underlined items are the factory default settings.
∫Audio
Dynamic Range Compression
[DVD-V] (Dolby Digital only)
Change the dynamic range (l 58) for easier listening in low volume.
∫Video
Still Mode
When “On” is selected for “Progressive” (l 39), the setting for “Still
Mode” is not effective.
[On] [Off]
Select the type of picture shown when you pause play.
(l 58, “Frame and field”)
Select MTS
Select whether to record the main or secondary audio type (SAP)
when recording or transferring (dubbing) to DVD-R, DVD-RW (DVD-
Video format) or +R. (You cannot select the audio type on the unit
when recording audio to DVD-R, DVD-RW (DVD-Video format) or
+R from an external device. Select it on the external device.)
[Main] [Secondary Audio Program (SAP)]
[Automatic] [Field] [Frame]
Field
Select if jittering occurs when “Automatic” is selected.
Frame
Select if you cannot see small text or fine patterns
clearly when “Automatic” is selected.
Black Level Control
Digital Audio Output
Select “Normal”, “Lighter” or “Darker” to adjust the black level control
to the desired setting for picture enhancement.
Press [ENTER] to show the following settings.
Change the settings when you have connected equipment through
the unit’s DIGITAL AUDIO OUT terminal (l 14).
Press [ENTER] to display the menu.
Input Level
Adjusts the black level of the input signal.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
[Lighter] [Darker]
88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz despite the above
settings if the signals have a sampling frequency of over 96 kHz
or 88.2 kHz, or the disc has copy protection.
Output Level (Composite/SVideo)
Adjusts the black level of the output signal from the VIDEO OUT
and S-VIDEO OUT terminal.
[On] [Off]
[Lighter] [Darker]
On
Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process
signals with sampling frequency of 96 kHz or
88.2 kHz.)
Output Level (Component)
Adjusts the black level of the output signal from the COMPONENT
VIDEO OUT (Y/PB/PR) terminals.
[Lighter] [Normal] [Darker]
Off
Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
Dolby Digital
Choose whether to output by “Bitstream” which processes Dolby
Digital signals on other connected equipment or to convert the
signals to “PCM (2ch)” on the unit before output.
[Bitstream] [PCM]
Bitstream When you have connected the unit to a piece of
equipment having Dolby Digital logo.
PCM
When you have connected the unit to a piece of
equipment that doesn’t have Dolby Digital logo°.
DTS
Choose whether to output by “Bitstream” which processes DTS
signals on other connected equipment or to convert the signals to
“PCM (2ch)” on the unit before output.
[Bitstream] [PCM]
Bitstream When you have connected the unit to a piece of
equipment having DTS logo.
PCM
When you have connected the unit to a piece of
equipment that doesn’t have DTS logo°.
° Incorrect settings can cause noise to be output which can be
harmful to your ears and speakers, and audio will not be recorded
properly on media such as mini discs.
Select Audio Channel For DV Input
Select the kind of sound when recording from the unit’s DV
terminal.
[Stereo 1] [Stereo 2] [Mix]
Stereo 1
Stereo 2
Mix
Records sound (L1, R1) when DV recording is taking
place.
Records added sound such as narration (L2, R2)
subsequent to original recording.
Records both Stereo 1 and Stereo 2.
≥When recording MTS broadcast, select the type of
audio in advance from “Select MTS” (labove)
42
VQT0R73
Convenient functions
DVD
∫TV Screen
≥ Underlined items are the factory default settings.
TV Type (l 19)
∫Display
Status Messages
Choose whether to show status messages automatically or not.
/
Choose the setting to suit your TV and preference.
[Aspect 4:3 & 480i] [Aspect 4:3 & 480p]
[Aspect 16:9 & 480i] [Aspect 16:9 & 480p]
[Automatic] [Off]
4:3 TV Settings for DVD-Video
On-screen Language
Choose the language for these menus and the on-screen messages.
You can select how to display the image on the TV when you watch
16:9 images (DVD-Video) on a 4:3 standard aspect TV. (l 58)
[Pan and Scan (Stretch to fit)] [Letterbox (Shrink to fit)]
[English] [Español] [Français]
Blue Background
Select whether to show the blue background, normally shown when
TV reception is poor.
[On] [Off]
Pan and Scan
(Stretch to fit)
Video recorded for a widescreen is played with
the sides cut off if Pan & Scan was specified.
If 16:9 software prohibits Pan & Scan, the
image will appear in the letterbox style (with
black bands above and below the picture)
despite the setting here.
Front Display
Changes the brightness of the unit’s display.
Letterbox
(Shrink to fit)
Video recorded for a widescreen is played in
the letterbox style.
[Bright] [Dim] [Automatic]
Automatic The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit is
turned off, the unit’s display disappears. While using
this mode the standby power consumption can be
reduced.
4:3 TV Settings for DVD-RAM
[4:3] [Pan and Scan (Stretch to fit)] [Letterbox (Shrink to fit)]
4:3
Titles are played as recorded.
Pan and Scan
(Stretch to fit)
Video recorded for a widescreen is played with
the sides cut off.
Letterbox
(Shrink to fit)
Video recorded for a widescreen is played in
the letterbox style.
∫VHS
(l 52)
TAPE SELECT
JET SEARCH
Language code list
Abkhazian:
Afar:
Afrikaans:
Albanian:
Ameharic:
Arabic:
Armenian:
Assamese:
Aymara:
Azerbaijani:
Bashkir:
6566 Chinese:
6565 Corsican:
6570 Croatian:
8381 Czech:
6577 Danish:
6582 Dutch:
7289 English:
6583 Esperanto:
6589 Estonian:
6590 Faroese:
6665 Fiji:
9072 Hausa:
6779 Hebrew:
7282 Hindi:
6783 Hungarian:
6865 Icelandic:
7876 Indonesian:
6978 Interlingua:
6979 Irish:
7265 Lithuanian:
7684 Romanian:
7775 Russian:
7771 Samoan:
7783 Sanskrit:
7776 Scots Gaelic:
7784 Serbian:
7773 Serbo-Croatian: 8372 Turkmen:
7782 Shona:
7779 Sindhi:
7778 Singhalese:
7865 Slovak:
7869 Slovenian:
7879 Somali:
7982 Spanish:
8279 Telugu:
8285 Thai:
8377 Tibetan:
8365 Tigrinya:
7168 Tonga:
8382 Turkish:
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
7387 Macedonian:
7273 Malagasy:
7285 Malay:
7383 Malayalam:
7378 Maltese:
7365 Maori:
7165 Marathi:
7384 Moldavian:
7465 Mongolian:
7487 Nauru:
7578 Nepali:
7583 Norwegian:
7575 Oriya:
7589 Pashto, Pushto: 8083 Sundanese:
8378 Twi:
6984 Italian:
8368 Ukrainian:
8373 Urdu:
8375 Uzbek:
8376 Vietnamese:
8379 Volapük:
6983 Welsh:
8385 Wolof:
8387 Xhosa:
8386 Yiddish:
8476 Yoruba:
8471 Zulu:
8465
7079 Japanese:
7074 Javanese:
7073 Kannada:
7082 Kashmiri:
7089 Kazakh:
7176 Kirghiz:
7565 Korean:
6869 Kurdish:
6976 Laotian:
7576 Latin:
Basque:
6985 Finnish:
Bengali, Bangla: 6678 French:
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
Byelorussian:
Cambodian:
Catalan:
6890 Frisian:
6672 Galician:
6682 Georgian:
6671 German:
7789 Greek:
6669 Greenlandic:
7577 Guarani:
6765 Gujarati:
7579 Persian:
7585 Polish:
7679 Portuguese:
7665 Punjabi:
7065 Swahili:
8076 Swedish:
8084 Tagalog:
8065 Tajik:
7178 Latvian, Lettish: 7686 Quechua:
7185 Lingala:
8185 Tamil:
7678 Rhaeto-Romance: 8277 Tatar:
8484
43
VQT0R73
Convenient functions
DVD
Clock Settings
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other
FUNCTIONS DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
DVD/VHS POWER
Playback
DIRECT NAVIGATOR
PLAYLISTS
TV
FLEXIBLE RECORDING
DV AUTO RECORDING
POWER
Schedule
SCHEDULE
VCR Plus+
SETUP
VOLUME
2
1
3
DISC MANAGEMENT
CH
INPUT SELECT TV/VIDEO
Functions” with [3, 4]
and press [ENTER].
[3] Select “SETUP” with
[3, 4] and press
[ENTER].
[4] Select “Setup” with [3,
4] and press [2, 1].
[5] Select “Clock Settings”
with [3, 4] and press
[ENTER].
OPERATION
SELECT
VHS
DVD
Other Functions
Return
DVD
ENTER
TRACKING/V-LOCK
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
FUNCTIONS
SETUP
Off Timer
6 Hours
Remote Control Code
Set Code 1
3, 4, 2, 1
Setup
Disc
ENTER
Quick Start
On
RETURN
SUB MENU
Restore Default Settings
Video
Audio
Display
S
RETURN
STATUS
TIME SLIP
JET REW
SCHEDULE
DISPLAY
STATUS
TV Screen
VHS
REC
REC MODE DVD ERASE ADD/DLT
1 Set Clock Automatically
1 Adjust Time Zone
≥Follow steps 1 to 5 of “Clock Settings”.
≥Follow steps 1 to 5 of “Clock Settings”.
Adjust the time zone (j1 or i1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manually.
[6] Select “Set Clock Automatically” with [3, 4]
and press [ENTER].
[7] Press [ENTER].
[6] Select “Adjust Time
Time Zone
≥Auto setting starts. This can take some time, up to a few hours
Zone” with [3, 4] and
press [ENTER].
j1
0
in some cases. The following screen appears when setting is
complete.
i1
Set Clock Automatically
[7] Select “j1” or “i1”
Auto Clock Setting is complete.
with [3, 4] and press [ENTER].
11/15/2005 11:15 AM
DST.................... On
Time Zone....... CST
∫To return to the previous screen
Press [RETURN].
≥If the time was not set correctly, use manual clock setting or
time zone adjust.
1 Set Clock Manually
≥DST, (Daylight Saving Time) shows the summertime setting.
≥Time Zone shows the time difference from Greenwich Mean
Time (GMT).
≥Follow steps 1 to 5 of “Clock Settings”.
[6] Select “Set Clock Manually” with [3, 4] and
press [ENTER].
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time) l GMT j6
MST (Mountain Standard Time) l GMT j7
Set Clock Manually
Month
1
Day
1
Year
Hour
12
Minute
/
2000
:
/
SAT
00 PM
PST (Pacific Standard Time)
l GMT j8
DST
Time Zone
EST
AST (Alaska Standard Time) l GMT j9
HST (Hawaii Standard Time) l GMT j10
For other areas: xx hr
Off
ENTER
[8] Press [ENTER].
[7] Use [2, 1] to select the item you want to
change, and press [3, 4] to change the setting.
∫To cancel in the middle
Press [RETURN].
≥DST (Daylight Saving Time): On or Off
If you select “On”, the clock is advanced one hour starting at
2 a.m. on the first Sunday in April and ending at 2 a.m. on the
last Sunday in October.
≥Time Zone (l left)
[8] Press [ENTER].
≥The clock starts.
∫To return to the previous screen
Press [RETURN].
44
VQT0R73
VHS
Playback
VHS
Inserting a video cassette
The surface on which you can see a roll of tape should face up.
Insert a video cassette.
≥The unit is automatically turned on.
When the status display (l right) appears. (l 53)
π
Remain
11/8 10:15 PM
00:05.14
2:34 EP
The remaining tape time counter begins when you insert
a tape. Depending on the tape, this may take up to
approximately 30 seconds.
π
∫To eject a video cassette
≥You can eject a video cassette even when the unit is in standby mode. It does not switch back to standby mode after the video cassette is
ejected.
For main unit
≥Press [<, EJECT] on the main unit.
For remote control
≥Press [VHS] and then press and hold [∫, STOP] for about 3 or more seconds.
Video cassette information
∫ Video cassettes
≥Break off the video cassette’s tab to prevent accidental erasure. Cover the hole with a double layer of
adhesive tape when you want to use the video cassette for recording again.
≥You can use video cassettes with the VHS and S-VHS marks, but the unit is unable to make full use of
the characteristics of S-VHS video cassettes.
Tab
∫ Video cassette care
≥Poor quality or damaged video cassettes can cause the heads to become dirty and malfunction. Store your video cassettes carefully and
discard them when they become dirty or damaged.
≥Never use video cassettes on which juice has been spilled or those that are extremely damaged since this will not only cause the heads to
become dirty, but will also make the unit malfunction.
∫ Maintenance
Cleaning the video heads
Dirt on the video heads can cause poor recording and play.
If the picture does not improve, use an optional head-cleaning cassette (part number NV-TCL30PT). If the problem persists, seek advice from
a qualified service person.
46
VQT0R73
Playback
VHS
Playing a video cassette
≥Play starts automatically if you insert a video cassette with the
tab removed.
∫To pause play
DVD/VHS POWER
TV
POWER
Í
Press [;, PAUSE]. (Press again to restart play.)
VOLUME
CH
INPUT SELECT TV/VIDEO
∫To stop play
Press [∫, STOP].
OPERATION
SELECT
VHS
DVD
VHS
TRACKING/V-LOCK
CANCEL/RESET
Note
V
the beginning. This function does not work during scheduled
recording, fast-forwarding and specified stop recording.
≥Jet Search, cue, review or slow playback will be automatically
canceled after 10 minutes and for pause it will be canceled after
5 minutes.
SLOW/
SKIP/INDEX
REW SEARCH FF
6, 5
PLAY
1
;
∫
NU
DIRECT NAVIGATOR
FUNCTIONS
S
TIME SLIP
VHS MENU
that appears in VP mode may be distorted.
SCHEDULE
JET REW
DISPLAY
STATUS
TOP MENU
6 JET REW
≥When playing back a tape which was recorded on another VCR, it
may be necessary to adjust the tracking (l 48). In some cases the
picture quality may still be inferior. This is due to format constraints.
≥When the unit starts making a scheduled recording on the DVD
during VHS playback, some picture distortion may occur.
≥When the TV is connected to the DVD PRIORITY output terminal
on this unit and the unit starts making a recording or scheduled
recording on the DVD, you cannot watch pictures played back on
VHS.
Preparation
≥Select the unit viewing channel (e.g. the AV input) on the TV.
≥Press [VHS].
[1] Press [Í, DVD/VHS POWER] to turn the unit on.
[2] Insert a recorded video cassette. (l 46)
[3] Press [1, PLAY].
Fast-forward/Rewind
Slow
While stopped
During play
Press [6] (backward)/[5] (forward).
Press and hold [;, PAUSE] for about 2 seconds or
more.
Cue/Review
≥Press [1, PLAY] to restart normal playback.
During play
Jet Rewind
To perform a Higher Speed Rewind
The “J. REW” indication appears on the TV screen.
≥Depending on the tape or an operating condition, the rewind speed
may change somewhat.
Tap or keep pressing [6] (backward)/[5]
(forward).
≥If you keep pressing these buttons, normal playback restarts by
releasing them.
≥Tap [1, PLAY] to restart normal playback.
Jet Search
During play
Tap [6] (backward)/[5] (forward) twice. You
≥The tape counter is reset to “00:00.00” when the tape is rewound to
the beginning.
≥Depending on the tape, this function may not work.
can increase Cue/Review search speed.
≥Press [1, PLAY] to restart normal playback.
≥You can select search speed to view the recorded picture. (l 52)
≥The picture recorded in EP or VP mode may be distorted if it is
played at approx. 35 times speed. A vertical scroll may occur. It is
not a malfunction but if it happens, change to approx. 27 times
speed.
≥The picture may not be in color or may be distorted depending on
the TV.
47
VQT0R73
Playback
VHS
Adjusting the playback picture
DVD/VHS POWER
TV
CH, W, X
POWER
VOLUME
∫ Manual tracking
CH
INPUT SELECT TV/VIDEO
The unit usually makes tracking adjustments, but you may need to
do it manually if noise appears on a tape recorded on other
equipment.
TV/VIDEO
VHS
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
TRACKING/
V-LOCK, r, s
CH, W, X
Numbered
buttons
During play
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the noise disappears.
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
SLOW/
SKIP/INDEX
REW SEARCH FF
∫ Vertical locking adjustment
PLAY
1
;
Adjust the vertical synchronization to stop the picture from jiggling
while paused.
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
While paused
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the jiggling stops.
SUB MENU
RETURN
TIME SLIP
S
∫To return to auto tracking
Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s]
SCHEDULE
STATUS
DISPLAY
JET REW
simultaneously.
STATUS
VCR/TV
REC MODE
REC
REC MODE DVD ERASE ADD/DLT
CREATE
µ
∫To remove the noise from a paused picture
Start slow play, then adjust the tracking.
DUBBING
VHS DVD
VCR/TV
CHAPTER
Note
Preparation
≥Press [VHS].
≥This function may not work with some TV models and tapes.
≥You can also adjust the tracking and vertical synchronization with
[CH, W, X] on the main unit.
S-VHS Quasi Playback (SQPB)
It is also possible to play back tapes recorded in the S-VHS system.
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution that S-VHS is
capable of.
≥It is not possible to record in the S-VHS system with the unit.
Repeat Playback
During play or while stopped
Keep pressing [1, PLAY] for
about 5 or more seconds.
≥The “RPt” indication appears on the unit’s display.
≥At the end of the program, the tape rewinds to the beginning of the
program and plays it again (it only works if there is at least 5
seconds blank space at the end of the program). This repeats until
you cancel it.
∫To restart normal playback
Press [1, PLAY].
∫To stop play
Press [∫, STOP].
48
VQT0R73
Recording
VHS
Recording TV programs
∫ Recording procedures
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
≥Check that the clock is set to the correct time. If it has not been set,
set it (l 44).
≥Press [VHS].
∫ Specifying the time when recording will
stop
Preparation
≥Press [VHS].
While recording
Press [¥, REC] to select recording time.
≥You can also press [¥, REC] on the main unit.
[1] Insert a video cassette with an intact accidental
erasure prevention tab. (l 46)
The unit’s display
Each time you press the button:
Counter (Cancel) # OFF 0:30 # OFF 1:00 # OFF 1:30
^------ OFF 4:00 ! OFF 3:00 ! OFF 2:00 !----------}
[2] Press [CH, W, X] to select a TV channel.
≥If you keep pressing these buttons, the channels change
quickly.
≥For VHS, the “DV” channel can be selected however it cannot
be recorded.
To select channels with the numbered buttons:
Antenna Mode (Airwaves)
For your reference
≥When the recording time ends, the unit will turn off itself.
≥This does not work during scheduled recording.
≥Recording stops and the set time is cleared if you press [∫, STOP].
e.g.,
“5”:
“15”:
[0] )[5]
[1] )[5]
CableTV Mode (Cable)
∫ Watching the TV while recording
Preparation
≥Connection (without Audio/Video cable)
- Make sure that the “TV” indicator is lit on the unit’s display. If it is
not lit, press [VCR/TV] to light it.
≥Connection (with Audio/Video cable)
- Press [TV/VIDEO] to change the input mode to “TV”.
e.g.,
“5”:
“15”:
“115”:
[0] )[0] )[5]
[0] )[1] )[5]
[1] )[1] )[5]
[3] Press [REC MODE] to select a recording mode.
Each time you press the button:
SP>EP>VP
^-----------------}
Press TV’s [CH, W, X] to select a desired TV
channel.
[4] Press [¥, REC] to start recording.
∫To pause recording
Press [;, PAUSE]. (Press again to restart recording.)
For your reference
≥You can also do this if the unit is making a scheduled recording.
≥The recording is not affected.
∫To stop recording
Press [∫, STOP].
∫ Playing DVD while VHS recording
Recording mode
You can play discs while recording. The recording will not be
affected.
≥DVD playback (l 20)
SP: You can record the length shown on the tape.
EP: 3 times the length of SP mode.
VP: 5 times the length of SP mode.
≥To have a longer recording capacity, select “EP” or “VP”.
≥If the image quality is important to you or if you wish to store the
tape for a long period, select “SP”.
≥The unit can play tapes recorded in LP mode on other equipment.
VP mode:
≥A tape recorded in VP mode by the unit cannot be played
back by other VCRs. It is recommended to distinguish it from
other tapes by writing “VP” on the tape label, etc.
≥It takes more time for automatic tracking to work when playing
tapes recorded with VP mode, and it may not work at all with
some tapes. Do tracking manually if this is the case (l 48).
Note
≥Even if the video cassette you use is labeled “S-VHS”, it is not
records in the normal VHS system.
≥You cannot change channels while recording. You can change
channels while in pause mode.
≥When recording is paused for 5 or more minutes, the unit returns
to stop mode.
∫To display the approximate remaining tape time
[1] Select “TAPE SELECT” from the “VHS” menu and select the
corresponding tape length. (l 52)
[2] Press [STATUS] several times.
The display changes as follows each time [STATUS] is pressed.
Input channel ) Remaining tape time ) Counter
^-------------------------------------------------------------------------------------}
≥The remaining tape time may not be displayed correctly depending
on the tape used.
49
VQT0R73
Recording
VHS
Scheduled Recording
DVD/VHS POWER
TV
POWER
You can enter up to 16 programs a month in advance.
Í
VOLUME
CH
INPUT SELECT TV/VIDEO
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
≥Check that the clock is set to the correct time. If it has not been set,
set it (l 44).
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
VHS
≥Insert a video cassette with an intact accidental erasure prevention
tab. (l 46)
≥Press [VHS].
Numbered
buttons
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
VCR Plusi
∫ Using VCR Plus_ system
SLOW/
SKIP/INDEX
REW SEARCH FF
®
Entering the PlusCode numbers is an easy way of scheduled
recording. You can find these codes in TV listings in newspapers and
magazines.
PLAY
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
≥When connecting a cable TV box or satellite receiver, the VCR
Plusi system does not work. Program the scheduled recording
manually (l 51).
3, 4, 2, 1
[1] Press [VCR Plus_].
ENTER
SUB MENU
RETURN
TIME SLIP
VCR Plus+
Remaining Recording Time
VHS 1:43 SP
DVD 1:43 SP
11/15 Tue 8:34 PM
S
SCHEDULE
DISPLAY
STATUS
JET REW
SCHEDULE
REC MODE
REC
REC MODE DVD ERASE ADD/DLT
CREATE
[2] Press the numbered buttons to enter the
PlusCode number.
COPYING
VHS
VCR/TV
CHAPTER
DVD
[3] Press [ENTER].
Cautions for using scheduled recording
on VHS
SCHEDULED
RECORDING
Remaining Recording Time
VHS 1:43 SP
DVD 1:43 SP
11/15 Tue 8:34 PM
∫Scheduled recording automatically starts at the set
time.
About 1 minute before the scheduled recording starts, the unit
switches on. When it finishes, the unit switches back off. If another
program is also being played back, the unit does not switch back
off.
Channel
39
Date
On
Off
Drive
VHS
Mode
SP
11/29 Tue
10:00 PM
11:00 PM
Title Name
≥ Confirm the program and correct it if necessatro sytore nuewsing [3, 4,
2, 1]. (“Manual programming” l 51, step 2)
≥“Invalid Entry” is displayed when you enter the wrong PlusCode
number. Reenter the PlusCode number.
Press ENTER
schedule
[4] If the program is correct
∫Scheduled recording cannot be activated on both DVD
and VHS at the same time.
Make sure the scheduled recording start times do not overlap on
Press [ENTER].
≥Make sure that the scheduled recording has been programmed
correctly on the SCHEDULED LIST screen (l 51).
≥Repeat steps 1–4 to program other recordings.
both DVD (l 29) and VHS (l 51) Scheduled Recording screens.
When the scheduled recording settings overlap:
≥When the start time of both scheduled recordings is the same, the
scheduled recording of the last one set has priority.
[5] Press [SCHEDULE].
≥The message “Turn recorder off for Scheduled Recording.” is
shown on the TV.
[6] Press [Í, DVD/VHS POWER].
≥Scheduled recording can be started only when the unit is
turned off.
≥The unit turns off and “ ” lights on the unit’s display to indicate
scheduled recording standby has been activated.
∫To release the unit from scheduled recording standby
Press [Í, DVD/VHS POWER].
The unit turns on and “ ” goes out.
≥Be sure to press [Í, DVD/VHS POWER] to return the unit to
standby mode before the scheduled recording time. Scheduled
recording will work only if “ ” is displayed.
∫To stop recording while a program is working
[1] Press [VHS]
[2] Press [∫, STOP], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the main unit for 3 or more
seconds to stop recording.
Note
Refer to Note in Manual programming (l 51).
50
VQT0R73
Recording
VHS
∫ Manual programming
Auto SP/EP mode
≥When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before scheduled
recording starts.
If, at the beginning of a scheduled recording, there is not enough
tape remaining to complete the recording, the SP/EP function will
automatically run the tape at EP mode for recording. This ensures
that the entire program will be recorded. If EP mode is not enough to
stretch the remaining tape to fit the whole program you will not be
able to record the whole TV program.
[1] Press [SCHEDULE].
≥Make sure “New Scheduled Recording” is selected.
Scheduled recording
SCHEDULE
LIST
Remaining Recording Time
VHS 1:43 SP
DVD 1:43 SP
11/15 Tue 8:34 PM
No
01
Channel
39
Date
On
Off
Drive Mode
SP
Check
OK
New Scheduled
Recording is selected.
11/29 Tue
New Scheduled Recording
10:00 PM 11:00 PM VHS
1st program
2nd program (60 min.)
(30 min.)
[2] Press [ENTER], then move and change the
items using [3, 4, 2, 1].
15 min.
at SP
45 min.
at EP
SCHEDULED
RECORDING
Remaining Recording Time
VHS 1:43 SP
DVD 1:43 SP
30 min. at SP
11/15 Tue 8:34 PM
Video tape (e.g.: 60-minute cassette)
Channel
Date
On
:
Off
:
Drive
Mode
≥It is not possible to automatically activate VP mode.
≥The tape length must be set correctly. (l 52)
≥Some tapes may not work correctly.
≥If the recording mode changes from SP to EP during a scheduled
recording, some picture distortion occurs at that point.
Title Name
Press ENTER to store new schedule
≥You may use the numbered buttons to enter “Channel”, “Date”,
“On”, and “Off”.
≥Channel (Program Position/TV Station Name)
≥Date
≥On (start time)/Off (finish time)
The time increases or decreases in 30-minute increments if
you hold down the button.
Check, change or delete programs
≥Even when the unit is turned off, you can display the scheduled
recording list by pressing [SCHEDULE].
≥Drive (Recording drive)
Select recording drive to “VHS”.
[1] Press [SCHEDULE].
SCHEDULE
LIST
Remaining Recording Time
VHS 1:43 SP
DVD 1:43 SP
≥Mode (Recording mode)
You can also press [REC MODE] to change the recording
mode.
11/15 Tue 8:34 PM
No
01
02
Channel
Date
On
Off
Drive Mode
Check
OK
39
25
11/29 Tue
12/13 Tue
10:00 PM 11:00 PM VHS
10:30 PM 11:00 PM VHS
SP
SP
OK
New Scheduled Recording
SP,.EP,.VP,.AUTO°,.SP... (l 49)
° Auto SP/EP mode (l right)
≥Title Name
[2] Press [3, 4] to select a program.
[3] Press [CANCEL/RESET, ¢] to delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
Cannot be used.
[3] Press [ENTER] when you have finished making
changes.
The scheduled recording setting screen appears.
≥“Invalid Entry” is displayed when you enter the wrong item.
Reenter the item.
[4] If you press [ENTER] in step 3
Use [3, 4, 2, 1] to change and press [ENTER].
≥Make sure that the scheduled recording has been programmed
correctly on the SCHEDULE LIST screen (l right).
≥To continue programming:
[5] Press [SCHEDULE].
≥The message “Turn recorder off for Scheduled Recording.” is
shown on the TV.
Select “New Scheduled Recording” and repeat steps 2–3.
[4] Press [SCHEDULE].
∫To put the unit on scheduled recording standby
Press [Í, DVD/VHS POWER].
≥The message “Turn recorder off for Scheduled Recording.” is
shown on the TV.
[5] Press [Í, DVD/VHS POWER].
≥The unit turns off and “ ” lights on the unit’s display to indicate
scheduled recording standby has been activated.
≥
Scheduled recording can be started only when the unit is turned off.
≥The unit turns off and “ ” lights on the unit’s display to indicate
scheduled recording standby has been activated.
For your reference
≥Programs that failed to record are not deleted from the list
immediately, but are deleted from the list automatically at 4 a.m.
2 days later.
∫To release the unit from scheduled recording standby
Press [Í, DVD/VHS POWER].
The unit turns on and “ ” goes out.
≥Be sure to press [Í, DVD/VHS POWER] to return the unit to
standby mode before the scheduled recording time. Scheduled
recording will work only if “ ” is displayed.
∫To stop recording while a program is working
[1] Press [VHS]
≥You can also press and hold [∫] on the main unit for 3 or more
seconds to stop recording.
Note
≥“ ” flashes when the unit cannot perform scheduled recording
(e.g., video cassette with no accidental erasure prevention tab or
no video cassette in the cassette compartment).
≥The actual time recorded may be longer than the program itself
when TV programs are recorded using VCR Plus_ system.
≥If you set (l 44) “DST” (Daylight Saving Time) to “On” when
manually setting the clock, scheduled recording may not work
when summer switches to winter and vice versa.
51
VQT0R73
Convenient functions
VHS
Changing the unit’s settings
DVD/VHS POWER
TV
POWER
[1] While stopped
FUNCTIONS VHS
VHS
VOLUME
CH
INPUT SELECT TV/VIDEO
Write Protection Off
Press [FUNCTIONS].
Playback
[2] Select “Other
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
VHS
Schedule
SCHEDULE
VCR Plus+
SETUP
2
1
3
Functions” with [3, 4]
and press [ENTER].
[3] Select “SETUP” and
press [ENTER].
[4] Select “VHS” with [3,
4] and press [2, 1].
[5] Select an item to be
changed with [3, 4]
and press [ENTER].
Other Functions
Return
ENTER
AUDIO
AUDIO
SETUP
TAPE SELECT
JET SEARCH
T120
CANCEL/RESET
VCR Plus+
CM SKIP
k35
Channel
Setup
Disc
SLOW/
SKIP/INDEX
REW SEARCH FF
:, 9
Video
Audio
Display
PLAY
∫
TV Screen
VHS
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
FUNCTIONS
[6] Select an option with
[3, 4] and press [ENTER].
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
∫To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change is
not activated until you press [ENTER].
S
RETURN
STATUS
SCHEDULE
STATUS
DISPLAY
JET REW
∫To exit the screen
Press [RETURN] several times.
REC
REC MODE DVD ERASE ADD/DLT
CREATE
µ
COPYING
VCR/TV
CHAPTER
VHS
DVD
For your reference
≥The settings remain intact even if you switch the unit to standby.
Preparation
≥Select the unit viewing channel on the TV.
≥Press [VHS].
1 Summary of settings
This description shows the initial settings for the unit. For
details on menu operation (l above).
VHS Index Search System (VISS)
≥ Underlined items are the factory default settings.
The unit automatically records special index signals on the tape
every time a recording is started. The index search function makes
use of these index signals to let you find the beginning of a desired
program quickly and easily.
∫VHS
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time.
[T120] [T160] [T180]
∫Index signals are recorded in the following cases.
≥When a recording is started by pressing [¥, REC].
≥When scheduled recording is started.
[T120]:
[T160]:
[T180]:
T30, T60, T90 and T120 tapes
T140 and T160 tapes
T180 tapes
Preparation
≥Insert a recorded video cassette.
JET SEARCH (l 47)
Set the speed for JET SEARCH when playing EP and VP tapes.
≥It is possible to view the picture recorded in EP or VP mode at
approx. 27 or 35 times speed.
While stopped or during normal play
Press [: ] or [ 9].
≥Each press increases the number of skips.
VHS cassette
6
12
[k27] [k35]
--------
≥Select [k27] if the picture is poor at [k35].
∫To cancel the index search
Press [∫, STOP].
Note
≥Up to 20 index signals can be searched for in both directions.
≥If you press either one of the buttons too much, you can control the
number of skips by pressing the opposite button.
≥The figure on the display decreases by 1 each time an index signal
is located.
≥This feature may not work correctly if the index signals are too
close together. Make recordings of at least 5 minutes.
52
VQT0R73
Convenient functions
VHS
2
Stereo/Mono/SAP indication
Indicates whether a program is broadcast in stereo, mono
or SAP.
Depending on the following, the status message
displayed will change.
∫DVD side not recording:
VHS operation when not recording or making a scheduled
recording on the DVD side.
Audio indicators (appear only in playback)
The Left (Mono L) and Right (Mono R) indicators show
which sound mode is selected as follows:
∫DVD side recording:
VHS operation when recording or making a scheduled recording on
the DVD side.
Stereo:
Mono L:
Mono R:
Normal:
Stereo indicators appear.
The Mono L indicator appears.
The Mono R indicator appears.
Neither the L nor R indicator appears.
When the DVD side is not recording
3
4
Operation status display
Shows the time and tape counter
Press [STATUS] to change the information
displayed.
Pressing [STATUS] once makes the on-screen display
appear. After that, press the button repeatedly to change
the display as follows:
Present time > Tape counter > Remaining tape time
^-----------------------------------------------------------------}
During Index search: “01” to “20” is displayed.
The display changes each time you press the button.
VHS cassette
Play
(1)
(2)
CH 10
(3)
(4)
Stereo
During Jet Rewind:
“J. REW” is displayed.
Tray Open
≥Press [CANCEL/RESET, ¢] to reset the tape counter
(elapsed time) to “0:00.00”. The tape counter is
automatically reset to “0:00.00” when inserting a video
cassette.
(5)
(6)
π
VHS cassette
Play
≥The remaining time is approximate. It will be incorrect if
you set the wrong tape time in “TAPE SELECT” in the
“VHS” menu and if the tape is of poor quality.
Remain
π
11/8 10:15 PM
00:05.14 EP
2:34 EP
00:00.10 SP
π
CH 10
Stereo
5
6
Cassette-in indicator
Shows whether you have inserted a video cassette.
Tray Open
(8)
(7)
Recording mode indicator (l 49)
No display
Note
∫Display examples
≥These displays do not appear when paused or during slow play.
≥The on-screen display may be distorted depending on the playback
tape or the input signal.
(1) A VHS cassette is inserted/not inserted
(2) Current recording or play status, input channel
≥Shows the current state of the unit and the input channel.
(3) Audio type (l right)
(4) Other drive operation
Changing audio
(5) The current date and time
While playing tapes
(e.g.: “2:34 EP” indicates 2 hours and 34 minutes in EP mode)
(7) Elapsed play time
Press [AUDIO].
The audio changes as follows:
Stereo program
SAP program
(8) Recording time
DVD side not recording
DVD side recording
A
A
B
A
≥Shows recording time, recording mode and a rough guide to
how much space has been used for recording on the tape.
A:
When the DVD side is recording
Stereo > Mono L > Mono R > No display (Normal audio track)
^------------------------------------------------------------}
To see these displays, set the “Status Messages” item in the
“Display” to “Automatic”. (l 43)
B:
MAIN+SAP > MAIN > SAP > No display (Normal audio track)
Press [STATUS].
The time and operation details appear on the screen for about
5 seconds.
^------------------------------------------------------------}
Auto Bilingual Choice Function
1
2
3
4
When a stereo broadcast or SAP broadcast is recorded and played
back on the unit, stereo sound will be automatically selected in the
case of a stereo broadcast and SAP sound will be automatically
selected in the case of a dual-sound broadcast (Mono and SAP or
Stereo and SAP).
CH 1
Stereo
0:00.22
;¥ SP 1
5
6
≥This function may not work properly if the program is played back
from a mid point. In a case like this, press [AUDIO] and select the
right sound.
≥The function will not work with a cassette which has been recorded
using external equipment.
1
Channel display
53
VQT0R73
DVD/VHS
Transferring (Dubbing)
DVD VHS
Before transferring (dubbing)
You cannot transfer (dub) titles which have been treated to prevent copying.
Direction
Type of transfer (dubbing) you want
Suitable methods
From
To
Easy transferring (dubbing) with one button
≥When you want to transfer (dub) from the selected start
point to the end of the tape
DVD-RAM, DVD-R,
DVD-RW, or +R
One Touch Transfer
VHS
(l 55)
Easy transferring (dubbing) with one button
≥When you want to transfer (dub) a whole disc
≥When you want to transfer (dub) from the beginning of the
selected title to the end of the disc
DVD-RAM, DVD-R,
DVD-RW or +R
One Touch Transfer
VHS
VHS
(l 56)
Finalized disc [DVD-R,
DVD-RW (DVD-Video
format), +R], +RW or
DVD-Video on sale that
are not copy-protected,
etc.
Easy transferring (dubbing) with one button
Cannot transfer
∫Caution for transfer (dubbing) from VHS to DVD
≥Copy-protected video tapes cannot be dubbed. Most video tapes
are copy-protected to prevent illegal reproduction and they
cannot be recorded.
∫Caution for transfer (dubbing) from DVD to VHS
≥Copy-protected discs cannot be dubbed. Most discs are copy-
protected to prevent illegal reproduction and they cannot be
recorded.
the display and the recording stops on the spot.
≥If a part of a tape recorded in VP mode is dubbed to disc, noise
may appear at the beginning of the dubbed part.
≥If you set “TV Type” to progressive (l 19), the setting switches
to interlace when the transfer (dubbing) starts. However it
returns to progressive when the transfer (dubbing) finishes.
Only the following operations are allowed while transferring
(dubbing):
seconds or more.
≥Stopping transfer by pressing [∫, STOP].
≥Changing operating drive
Only the following operations are allowed while transferring
(dubbing):
≥Stopping transfer by pressing and holding [RETURN] for about 3
seconds or more.
≥Stopping transfer by pressing [∫, STOP].
≥Changing audio (l 53)
≥Adjusting the picture
When transfer (dubbing) is started, the following operations
also start automatically
≥“Status Messages” on Display ) “Off” (l 43)
≥Audio output when playing back DVD ) Stereo (L R) [RAM]
≥Changing operating drive
When transfer (dubbing) is started, the following operations
also start automatically
≥“Status Messages” on “Display” ) “Off” (l 43)
If you start transfer (dubbing) when the resume play function
(l 20) is working, the transfer (dubbing) is executed from the
beginning of the title which contains the starting position of
playback to the end of the disc.
54
VQT0R73
Transferring (Dubbing)
DVD VHS
Transfer (Dubbing) from VHS
∫To stop transfer (dubbing) in the middle
Press [∫, STOP] or press and hold [RETURN] for about 3 seconds
DVD/VHS POWER
TV
POWER
or more.
VOLUME
CH
INPUT SELECT TV/VIDEO
Note
≥When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
∫Dividing a title to be dubbed
AUDIO
In One Touch Transfer (Dubbing) from VHS to DVD, the title is
divided by index signal detected and then recorded. You can
search desired titles with Direct Navigator’s Title View (l 33) after
transfer (dub) to DVD.
CANCEL/RESET
VCR Plus+
CM SKIP
SLOW/
SKIP/INDEX
REW SEARCH FF
≥Titles recorded within 15 minutes (25 minutes in VP mode) of
each other may not be divided properly.
≥The recording time may become longer than the original title
depending on the number of index signals.
PLAY
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
RETURN
SUB MENU
RETURN
S
TIME SLIP
CREATE
SCHEDULE
DISPLAY
STATUS
JET REW
F.REC
DUBBING
CHAPTER
VHS
DVD
“ DVD
OPERATION
SELECT
VHS
CH
DVD
REC
DUBBING
VHS
DVD
/k1.3
DV IN
DUBBING indicator
∫ One Touch Transfer (Dubbing)
(VHS l DVD)
[RAM] [-R] [-RW‹V›] [+R]
You can transfer (dub) programs recorded on a tape onto a disc° with
one stroke of the button.
In One Touch Transfer (Dubbing), programs are automatically
the time when the transfer (dubbing) of the tape starts.
° Available discs for transfer (dubbing) from tape are DVD-RAM,
non-finalized DVD-R, DVD-RW (DVD-Video format) and +R.
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
DVD
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. (l 8, 45)
≥Select the recording mode. (l 24)
≥When SAP broadcast program is played back on VHS, select the
audio to be recorded on disc in “Select MTS” in the “SETUP” menu.
(l 42) [-R] [-RW‹V›] [+R]
VHS
≥
Insert the video cassette containing the program to be copied (l 46).
[1] While both DVD and VHS are stopped
Press and hold [“ DVD, DUBBING] for about 3
seconds or more.
On the main unit, press [“ DVD].
≥Check if transfer (dubbing) starts
properly.
REC
≥The “DUBBING” indicator on the
main unit lights.
≥
Dub is automatically completed when the tape reaches its end or
the disc becomes full.
55
VQT0R73
Transferring (Dubbing)
DVD VHS
Transfer (Dubbing) from DVD
DVD/VHS POWER
TV
Make sure that the DVD is stopped.
≥When the resume play function is working, press [∫, STOP] to
de-activate it. (l 20)
POWER
VOLUME
CH
INPUT SELECT TV/VIDEO
INPUT SELECT
VHS
OPERATION
SELECT
∫When you transfer (dub) a title from the beginning of
the selected title to the end of the disc
∫When you transfer (dub) a playlist from the
beginning of the selected playlist to the last playlist
Press [1, PLAY] to play back the desired title or playlist
(l 36).
VHS
DVD
TRACKING/V-LOCK
DVD
CH, W, X
AUDIO
SKIP/INDEX
REW SEARCH FF
CANCEL/RESET
VCR Plus+
CM SKIP
:, 9
≥You can transfer (dub) (a title or playlist) while playback is
PLAY
paused by pressing [;, PAUSE].
1
;
∫
≥You cannot transfer (dub) a playlist which is longer than 8 hours.
(When you transfer (dub) multiple playlists, the playlist which is
longer than 8 hours is omitted.)
DIRECT NAVIGATOR
FUNCTIONS
REC
REC MODE DVD ERASE ADD/DLT
µ
DUBBING
VHS
DVD
VHS MENU
CREATE
REC MODE
VCR/TV
CHAPTER
[1] Press and hold [VHS —, DUBBING] for about 3
VHS —
seconds or more.
On the main unit, press [VHS —].
≥Check if transfer (dubbing) starts properly.
≥The “DUBBING” indicator on the main unit lights.
≥Dubbing is automatically completed when playback of the disc
is finished or the tape reaches its end.
OPERATION
SELECT
VHS
CH
DVD
REC
DUBBING
VHS
DVD
/k1.3
REC
DV IN
DUBBING indicator
∫To stop transfer (dubbing) in the middle
Press [∫, STOP].
Note
∫ One Touch Transfer (dubbing)
(DVD l VHS)
≥When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
working, the DVD is dubbed from the beginning of the title where
play last stopped.
[RAM] [-R] [-RW‹V›] [+R]
You can transfer (dub) titles recorded on a disc° onto a tape with one
touch of the button.
In One Touch Transfer (dubbing), all contents on the disc are
∫About Recording VISS (l 52)
° Available discs for transfer (dubbing) onto tape are DVD-RAM,
In One Touch Dubbing from DVD to VHS, the index signal is
automatically recorded for each title. You can search desired titles
with [: ] or [ 9].
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
DVD
≥Insert the disc containing the program to be copied (l 8).
VHS
≥ Insert a video cassette with an accidental erasure prevention tab.
(l 46)
≥Confirm that the remaining tape time is sufficient for recording.
(l 53)
≥Select the recording mode. (l 49)
56
VQT0R73
Transferring (Dubbing)
DVD VHS
Recording from an external device
When connecting to the IN2/DV input terminals on the front of
the unit
POWER
≥You can also connect to the IN1 input terminals on the rear of the
unit.
OPERATION
SELECT
EJECT
VHS
CH
DVD
S
VIDEO IN
–
REC
Before connecting any cables, first make sure that the power for
the unit and the external device are off. Then, after connecting
cables, turn on both.
SKIP
DVD
:/6
5/9
–
REW/FF VHS
DUBBING
VIDEO IN
L/MONO
–
AUDIO IN
–
R
VHS
DVD
IN2
/k1.3
DV IN
If the audio output of the other equipment is monaural
Connect to L/MONO. (Both left and right channels are recorded
when connected through L/MONO.)
≥The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
(2)
When recording from the unit’s DV input terminal (l 27)
≥The audio recorded through the DV input terminal is the audio
selected in the “Select Audio Channel For DV Input” (l 42).
≥When recording from DV equipment (e.g., digital video camcorder),
you can record audio/video recordings from DV tape only.
≥The DV input on this unit is for use with DV equipment only.
(3)
(1)
(4)
(1) Audio/Video cable (not supplied)
A Yellow (VIDEO)
C Red (R)
(2) S-Video cable (not supplied)
(3) DV cable (IEEE1394, 4-pin)
(4) External device (Playback equipment)
Preparation
[1] Press [REC MODE] to select the recording
≥Connect an external device to this unit’s input terminals
(l above).
mode. (DVD l 24, VHS l 49)
≥DVD [RAM] [-R] [-RW‹V›] [+R]
- It is also possible to perform Flexible Recording (FR). (l 25)
DVD [RAM] [-R] [-RW‹V›] [+R]
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].
[2] While stopped
Press [CH, W, X] or [INPUT SELECT] to select
the input channel for the equipment you have
VHS
≥Insert a video cassette with an accidental erasure prevention tab.
connected.
≥Select IN1, IN2 or DV.
(l 46)
≥Press [VHS].
≥For VHS, the “DV” channel can be selected however it cannot
be recorded.
1 DVD
1 VHS
Follow the above steps 1 to 2.
Follow the above steps 1 to 2.
[3] Start play on the external device.
[4] Press [¥, REC] at the point where you want to
[3] Press [1, PLAY].
≥Start playing the video cassette and find the recording start
point.
start recording.
[4] Press [;, PAUSE], then press [¥, REC].
≥Put the unit in recording standby mode.
[5] Start play on the external device.
[6] Press [;, PAUSE] at the point where you want
to start recording.
∫To skip unwanted parts
Press [;, PAUSE] to pause recording. (Press again to restart recording.)
∫To stop recording
Press [∫, STOP].
Note
≥When recording using the unit’s input terminals, only the sound received at the time of recording will be recorded. As long as secondary
audio that is recorded on the media in the external device is not output to the unit in play, it is not recorded.
≥When recording using IN1 or IN2 terminals, only the sound received at the time of recording will be recorded.
For your reference
≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.
57
VQT0R73
Reference
DVD VHS
Glossary
Bitstream
MP3 (MPEG Audio Layer 3)
This is a signal compressed and converted into digital form. It is
converted back to a multi-channel audio signal, e.g., 5.1-channel, by
a decoder.
An audio compression method that compresses audio to
approximately one-tenth of its size without any considerable loss of
audio quality. You can play MP3s you have recorded onto CD-R and
CD-RW.
CPRM (Content Protection for Recordable Media)
CPRM is technology used to protect broadcasts that are allowed to
be recorded only once. Such broadcasts can be recorded only with
CPRM compatible recorders and discs.
Pan & Scan/Letterbox
In general, DVD-Video are produced with the intention that they will
be viewed on a widescreen TV (16:9 aspect ratio), so images often
don’t fit regular TVs (4:3 aspect ratio). 2 styles of picture,
“Pan & Scan” and “Letterbox”, deal with this problem.
Decoder
A decoder restores the coded audio signals on DVDs to normal. This
is called decoding.
Pan & Scan:
The sides are cut off so the picture fills the screen.
Down-mixing
This is the process of remixing the multi-channel audio found on
some discs into two channels. It is useful when you want to listen to
the 5.1-channel audio recorded on DVDs through your TV’s
speakers. Some discs prohibit down-mixing. If this is the case, this
unit can only output the front two channels.
Letterbox:
Black bands appear at the top and bottom of the
picture so the picture itself appears in an aspect ratio
of 16:9.
Dynamic range
Dynamic range is the difference between the lowest level of sound
that can be heard above the noise of the equipment and the highest
level of sound before distortion occurs. Dynamic range compression
means reducing the gap between the loudest and softest sounds.
This means you can hear dialog clearly at low volume.
Playback control (PBC)
If a Video CD has playback control, you can select scenes and
information with menus displayed on the screen.
(The unit is compatible with version 2.0 and 1.1.)
Film and Video
DVD-Videos are recorded using either film or video. The unit can
determine which type has been used, then uses the most suitable
method of progressive output.
≥Film is 24 or 30 frames per second, with motion picture film
generally being 24 frames per second.
Progressive/Interlace
NTSC, the video signal standard, has 480 interlaced (i) scan lines,
whereas progressive scanning uses twice the number of scan lines.
This is called 480p.
Using progressive output, you can enjoy the high-resolution video
recorded on media such as DVD-Video.
Your TV must be compatible to enjoy progressive video.
≥Video is 60 fields per second (2 fields making up 1 frame).
Finalize
A process that makes play of a recorded CD-R, CD-RW, DVD-R, etc.
possible on equipment that can play such media. You can finalize
DVD-R, DVD-RW (DVD-Video format) and +R on the unit. After
finalizing, the disc becomes play-only and you can no longer record
or edit. However, finalized DVD-RW can be formatted to become
recordable.
Protection
You can prevent accidental erasure by setting writing protection or
erasure protection.
Sampling frequency
Sampling is the process of converting the heights of sound wave
(analog signal) samples taken at set periods into digits (digital
encoding). Sampling frequency is the number of samples taken per
second, so larger numbers mean more faithful reproduction of the
original sound.
Formatting
Formatting is the process of making media such as DVD-RAM
recordable on recording equipment.
You can format DVD-RAM and DVD-RW (only as DVD-Video format)
on the unit.
Formatting irrevocably erases all contents on the disc.
Thumbnail
This refers to a miniature representation of a picture used to display
multiple pictures in the form of a list.
Frame and field
Frame refers to the single images that constitute the video you see
on your TV. Each frame consists of 2 fields.
Frame
Field
Field
+
=
≥A frame still shows 2 fields, so there may be some blurring between
them, but picture quality is generally better.
≥A field still shows less picture information so it may be rougher, but
there is no blurring.
JPEG (Joint Photographic Experts Group)
This is a system used for compressing/decoding color still pictures. If
data will be compressed to 1/10–1/100 of its original size. The
benefit of JPEG is less deterioration in picture quality considering the
degree of compression.
58
VQT0R73
Reference
DVD VHS
Frequently asked questions
Set up
Page
What equipment is necessary to
play multi channel surround
sound?
≥DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an amplifier
equipped with a Dolby Digital and a DTS decoder.
14
Can the headphones and speakers ≥You cannot directly connect to the unit. Connect through the amplifier etc.
be directly connected to the unit?
14
14
The TV has both S-VIDEO IN
terminal and COMPONENT VIDEO
IN terminals. Which terminal should
I connect with?
≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the
color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve
high fidelity in reproducing colors. If the TV is compatible with progressive output, a high
quality picture can be output because the unit’s component video output terminal outputs
a progressive output signal.
Is my TV progressive output
compatible?
≥All Panasonic TVs that have 480p input terminals are compatible. Consult the
manufacturer if you have another brand of TV.
–
Disc
Page
Can I play DVD-Video and
Video CDs bought in another
country?
≥You can play them if the video standard is NTSC.
≥However, you cannot play DVD-Video if its region number does not include “1” or “ALL”.
–
7
Can a DVD-Video that does not
have a region number be played?
≥The DVD-Video region number indicates the disc conforms to a standard. You cannot
play discs that do not have a region number.
–
Please tell me about DVD-R, DVD-
RW, +R and +RW compatibility with
the unit.
≥The unit records and plays DVD-R, DVD-RW (DVD-Video format) and +R, and plays
DVD-RW (DVD Video Recording format) and +RW.
≥The unit also records and plays high speed recording compatible DVD-R, DVD-RW, +R
discs.
6, 7
6
≥After formatting +R discs
–
- You may not be able to play +R discs on this unit after formatting them on other
Panasonic products or other manufacturer’s equipment.
- You may not be able to play +R discs on other equipment after formatting them on this
unit.
If you finalize the disc on the equipment used for formatting, play becomes possible.
Please tell me about CD-R and
CD-RW compatibility with the unit.
≥This unit plays CD-R/CD-RW discs which have been recorded in one of the following
standards: CD-DA, Video CD, MP3 and still pictures (JPEG). Close the session or finalize
the disc after recording. This unit can recognize up to 99 folders (groups) and 999 files
(tracks) on a disc with MP3 or still pictures (JPEG).
7, 22,
23
≥You cannot write to a CD-R or CD-RW with the unit.
7
Recording
Page
Can I record from a commercially
purchased video cassette or DVD?
≥Most commercially sold video cassettes and DVD are copy protected; therefore,
recording is usually not possible.
–
Can DVD-R, DVD-RW (DVD-Video
format) and +R recorded on the unit
be played on other equipment?
≥You can play on compatible equipment such as DVD players after finalizing the disc on
this unit. However, depending on the condition of the recording, the quality of the disc and
capabilities of the DVD player, play may not be possible.
31
–
Can I record digital audio signals
using the unit?
≥You cannot record digital signals. The digital audio terminals on the unit are for output
only. (The audio recorded using the DV automatic recording function from a digital video
camcorder, for example, is recorded digitally.)
Can a digital audio signal from the ≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio
42
unit be recorded to other
equipment?
Output” settings to the following from the SETUP menu.
- PCM Down Conversion “On”
- Dolby Digital “PCM”
- DTS “PCM”
However, only
- As long as digital recording from the disc is permitted.
- As long as the recording equipment is compatible with 48 kHz of sampling frequency.
≥You cannot record MP3 signals.
–
Can I switch to SAP during
recording?
≥With DVD-RAM, you can, and the audio recorded also changes. Just press [AUDIO].
≥With DVD-R, DVD-RW (DVD-Video format), +R you cannot. Change before recording
with “Select MTS” in the SETUP menu.
25
42
59
VQT0R73
Reference
DVD VHS
Error messages
∫ Common
On the unit’s display
Page
H, F, U
≥An error has occurred. The number following “H”, “F” or “U” depends on the status of the unit.
–
(“” stands for a number.)
Reset procedure: (“The unit is on but cannot be operated.” l 62)
≥
If the service numbers fail to clear, note the service numbers and contact a qualified service person.
–
∫ DVD
On the TV
Page
Cannot finish recording
completely.
≥The program was copy-protected.
≥The disc may be full.
≥There are already 99 recorded titles ([+R] 49 recorded titles).
–
–
–
Cannot play.
≥You inserted an incompatible disc (Discs recorded in PAL video, etc.).
–
8
Cannot record on the disc.
Unable to format.
≥The disc may be dirty or scratched.
Please check the disc.
Cannot record. Disc is full.
≥Create space by erasing any unwanted titles. [RAM] [-RW‹V›]
[Even if you erase recorded content from the DVD-R or +R, there is no increase in disc space. Available
disc space on DVD-RW (DVD-Video format) increases only when the last recorded title is erased.]
≥Use a new disc.
21, 30,
33
Cannot record. The number
of titles has exceeded the
maximum limit.
–
–
Error has occurred. Please
press ENTER.
≥Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering
(“SLF CHECK” appears on the unit’s display).
No disc
≥You haven’t inserted a disc. Correctly insert a disc that the unit can play.
≥The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
6, 8
8
Please change the disc.
≥There may be a problem with the disc. Press [<, OPEN/CLOSE] to remove it and check it for
8
scratches or dirt. (The unit turns off automatically after you open the tray.)
This is a non-recordable disc. ≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R, DVD-
–
RW (DVD-Video format) or +R.
≥You inserted an unformatted DVD-RAM or DVD-RW. Format the disc with the unit.
This disc is not formatted
properly.
31
20
≥The operation is prohibited by the unit or disc.
On the unit’s display
Page
RC
≥The remote control and main unit are using different codes. Change the code on the remote
18
(“” stands for a number.)
control.
Err
≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.
≥You have used a lens cleaner and it has finished. Press [<, OPEN/CLOSE] to eject the disc.
≥You have inserted a disc the unit cannot play or record on.
8
8
7
≥You have inserted a DVD-RAM or DVD-RW that is unformatted or recorded on other equipment.
31
–
≥
If there is no change after turning the unit on and off, consult the dealer where the unit was purchased.
oooooo
(self check)
≥There was something unusual detected with the disc while recording, playing or transferring
(dubbing), there was a power failure or the AC plug was disconnected while the unit was on. The
unit is carrying out its recovery process. This process restores the unit to normal operation. The
unit is not broken. Wait until the message disappears.
61
The symbol “o” appears at the bottom left of the unit’s display. The
number of symbols increases one by one until six appear. They then
disappear one by one until none remain. This continues during self
check.
U59
≥The unit is very warm.
–
–
The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan on the
rear of the unit.
U99
≥The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch the unit to
standby. Now press [POWER Í/I] on the main unit again to turn the unit on.
∫ VHS
On the TV
Page
No VHS cassette.
≥A video cassette is not inserted when recording programs. Insert a video cassette with an
46
accidental erasure prevention tab.
Please check write protect
tab on the VHS cassette.
≥
A video cassette without the accidental erasure prevention tab is inserted when recording programs.
Use a video cassette with an accidental erasure prevention tab.
46
60
VQT0R73
Reference
DVD VHS
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the
chart do not solve the problem, refer to the “Customer Services Directory” on page 66 if you reside in the U.S.A., or refer to “Product
information” on page 65 if you reside in Canada. In other areas, consult your dealer.
The following do not indicate a problem with the unit:
≥Regular disc rotating sound. The sound of the disc rotating may become louder especially when finalizing a DVD-R, DVD-RW (DVD-Video
format) or +R.
≥Poor reception due to atmospheric condition.
≥Image disturbance during search.
≥Periodic interruptions to reception due to satellite broadcasting breaks.
≥Operations do not work due to a poor-quality disc. (Try again using a Panasonic disc.)
≥The unit freezes due to the activation of one of its safety devices. (Press and hold [POWER Í/I] on the main unit for 10 seconds.)
∫ Common
Power
Page
No power
≥Insert the AC power supply cord securely into a known active AC outlet.
12
The unit switches to the standby ≥This is a power saving feature. Change “Off Timer” in the “SETUP” menu, if you would prefer.
41
–
mode.
≥One of the unit’s safety devices is activated. Press [POWER Í/I] on the main unit to turn the
unit on.
Cooling fan rotating sounds are ≥The cooling fan sometimes operates to cool active circuits in the unit while it is turned off. To
–
heard when the unit is off.
detect user operation and to prepare for quick REC&PLAY, some circuits need to be active
even when the unit is turned off.
Displays
The display is dim.
Page
43
≥Change “Front Display” in the SETUP menu.
“12:00 A” is flashing on the
unit’s display.
≥Set the clock.
44
The recording time display, the ≥The time on the unit’s display and the remaining recording time on the screen may be
–
transfer (dubbing) process
display and the displayed
recording time of MP3 are
different from the actual time.
indicated less or more than the actual value.
≥In DVD-R or +R, the remaining capacity does not increase even if titles are erased.
≥Available recording space on a DVD-RW (DVD-Video format) increases only when the last
recorded title is erased. It does not increase if other titles are erased.
≥If you repeat recording or editing about 200 times or more, the remaining capacity of the DVD-
R or the +R is reduced and then recording or editing may be disabled.
≥The time during fast forward and rewind, or the process during transfer (dub) may not be
displayed accurately.
–
–
–
–
Compared to the actual
recorded time, the elapsed time
displayed is less.
≥The displayed recording/play time is converted from the number of frames at 29.97 frames
(equal to 0.999 seconds) to one second. There will be a slight difference between the time
displayed and the actual elapsed time (e.g.,actual one-hour elapsed time may display as
approximately 59 minutes 56 seconds). This does not affect the recording.
–
The tape counter isn’t changing. ≥The tape counter does not change while playing unrecorded parts. The “second” display
–
changes as follows:
–
–
≥The unit’s display also appears like this if the tape is dirty or damaged. Consult your dealer if
this is the case.
“oooooo” is displayed and the ≥The unit is carrying out the recovery process. Do the following to eject the disc.
disc cannot be ejected.
(1) Press [POWER Í/I] on the main unit to switch to standby.
If the unit doesn’t switch to standby, press and hold [POWER Í/I] on the main unit for
about 10 seconds. The unit is forcibly switched to standby.
(2) The unit may have a problem. While the unit is off, press and hold [∫] and [CH, W] on the
main unit at the same time for about 5 seconds. Remove the disc and consult the dealer.
61
VQT0R73
Reference
DVD VHS
Operation
Page
Cannot operate the TV.
≥Change manufacturer code. Some TVs cannot be operated even if you change the code.
18
≥Press [TV/VIDEO] to change the input mode to “TV”.
25, 49
Cannot operate the DVD.
Cannot operate the VHS.
≥Press [DVD] when operating DVD.
10
10
≥Press [VHS] when operating VHS.
The remote control doesn’t
work.
≥The remote control code is wrong. Change to the correct code.
≥The batteries are depleted. Replace them with new ones.
≥Point the remote control at the remote control sensor on the main unit.
≥Remove obstacles between the remote control and main unit.
≥Don’t place the signal sensor in direct sunlight or in areas that may be subject to sunlight
exposure.
18
10
10
–
–
≥If you repeatedly insert discs or turn the unit on and off about 50 times or more, the recording
or editing of DVD-R, DVD-RW (DVD-Video format), +R may be disabled.
–
The unit is on but cannot be
operated.
≥Some operations are prohibited by the disc.
–
–
–
≥The unit is warm (“U59” appears on the unit’s display). Wait until “U59” disappears.
≥One of the unit’s safety devices may have been activated.
Reset the unit as follows:
(1) Press [POWER Í/I] on the main unit to switch to standby.
If the unit doesn’t switch to standby, press and hold [POWER Í/I] on the main unit for
about 10 seconds. The unit is forcibly switched to standby.
Alternatively, disconnect the AC power supply cord, wait for about 1 minute, then
reconnect it.
(2) Press [POWER Í/I] to turn the unit on.
Cannot eject a disc.
Startup is slow
≥The unit is recording.
–
–
≥The unit may have a problem. While the unit is off, hold down [∫] and [CH, W] on the main unit
simultaneously for about 5 seconds. Remove the disc and consult the dealer.
≥Make sure that “Quick Start” is set to “On”.
Even if “Quick Start” is set to “On”, startup is slow if the clock is not set, there was a power
failure or the AC plug has just been connected.
≥A few dozen seconds after turning on the unit, you can play a disc or start recording to discs
other than DVD-RAM.
41
–
≥Startup takes time for a few minutes after 4:00 a.m. due to system maintenance of this unit.
–
–
Takes time to read DVD-RAM
Picture
≥It may take time to read a disc if it is being used for the first time in this unit or it has not been
used for a long time.
Page
TV reception worsens after
connecting the unit.
≥This can occur because the signals are being divided between the unit and other equipment. It
can be solved by using a signal booster, available from audio-visual suppliers.
–
The images from the unit do not ≥Make sure that the TV is connected to the VIDEO OUT terminal, S-VIDEO OUT terminal or
12, 14
appear on the TV.
COMPONENT VIDEO OUT terminals on the unit.
≥Make sure that the TV’s input setting (e.g., VIDEO 1) is correct.
≥The TV isn’t compatible with progressive signals. Press and hold [CANCEL] on the remote
control or press and hold [∫] and [“ DVD, DUBBING] at the same time on the main unit until
the picture is displayed correctly. The setting will change to interlace.
≥Make sure that progressive output has not been selected when the connected TV is not
progressive compatible. Press and hold [CANCEL] until the picture displays correctly. The
setting will return 480i.
–
–
Picture is distorted.
–
62
VQT0R73
Reference
DVD VHS
Recording, Scheduled recording, Transfer (dubbing), External input
Page
Scheduled recording does not
work properly.
≥When connected to cable TV box or satellite receiver, the VCR Plus_ system does not work.
–
≥The scheduled recording program is incorrect or different scheduled recording times overlap. 29, 51
Correct the program.
VCR Plus_ system does not
work properly.
28, 50
≥The unit is not on schedule recording standby. (“ ” on the unit’s display is not on.)
Press [Í, DVD/VHS POWER] to turn the unit off and make sure that “ ” is on.
≥The clock is not correct. Set the clock.
≥Correct the guide channels with “VCR Plus_ Ch. Setting” in the SETUP menu.
≥The same guide channel is set to 2 or more channel positions. Set the guide channel correctly
or delete unnecessary channels.
44
16
16
–
≥Scheduled recording will not be activated during formatting, transfer (dubbing) and other such
operations which should not be interrupted when they are being carried out.
Scheduled recording does not
stop even when [∫, STOP] is
pressed.
29, 51
41
≥Press [∫, STOP] and then [ENTER] within 5 seconds to turn “ ” off. Recording stops.
≥If you start recording immediately after turning on the unit while “Quick Start” is set to “On”,
you cannot then stop recording for a few seconds.
The scheduled recording
program remains even after
recording finishes.
≥The scheduled recording program remains if set to daily or weekly.
29, 51
Cannot transfer (dub) VHS to
DVD.
≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with “DISC
MANAGEMENT”.
≥Some video tapes on the market (including rental videos) are copy-protected to prevent illegal
reproductions. Copy-protected video tapes cannot be properly recorded.
≥You cannot use the transfer (dubbing) function when the FUNCTIONS window, the Scheduled
Recording List screen, etc. are displayed.
30
–
–
Cannot transfer (dub) DVD to
VHS.
≥A video cassette without the accidental erasure prevention tab is inserted. Use a video
cassette with an accidental erasure prevention tab.
≥Some DVDs on the market (including rental DVD) are copy-protected to prevent illegal
reproductions. Copy-protected DVDs cannot be properly recorded.
≥You cannot use the transfer (dubbing) function when the FUNCTIONS window, the Scheduled
Recording List screen, etc. are displayed.
46
–
–
The sound level after
transferring (dubbing) is not
equal on DVD and on VHS.
≥The sound level on DVD and VHS may not match depending on the disc. When the sound
level in a particular part of the sound source is soft or loud, the sound may be recorded loudly
or softly on a video tape.
–
–
Stripe-shaped black noise is
recorded.
≥The device in playback is interfering with the TV because the device is too close to the TV.
Move the device away from the TV.
Cannot record video or sound
from the external device.
≥The external device is not correctly connected.
≥The proper external input channel (IN1 or IN2) is not selected.
57
57
∫ DVD
DVD Picture
Page
43
Status messages do not appear. ≥Select “Automatic” in “Status Messages” in the SETUP menu.
The blue background does not ≥Select “On” in “Blue Background” in the SETUP menu.
43
appear.
The 4:3 aspect ratio picture
expands left and right.
≥Use the TV to change the aspect. If your TV does not have that function, set “Progressive” in
the Video menu to “Off”.
≥Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video”, or “4:3 TV Settings for
DVD-RAM” in the SETUP menu.
39
43
Screen size is wrong.
There is a lot of after-image
when playing video.
≥Set “MPEG-DNR” in the Video menu to “Off”.
39
39
When playing DVD-Video using ≥Set “Progressive” in the Video menu to “Off”. This problem is caused by the editing method or
progressive output, one part of
the picture momentarily appears
to be doubled up.
material used on DVD-Video, but should be corrected if you use interlace output.
There is no apparent change in ≥The effect cannot be seen with certain types of video.
–
picture quality when adjusted
with the Video menu in the on-
screen menus.
63
VQT0R73
Reference
DVD VHS
DVD Sound
Page
No sound.
Low volume.
≥Check the connections and “Digital Audio Output” settings. Check the input mode on the
amplifier if you have connected one.
12–14,
42
Distorted sound.
Cannot hear the desired audio
type.
≥Press [AUDIO] to select the audio.
21, 25
39
≥Set “V.S.S.” in the Audio menu to “Off” in the following cases.
- When using discs that do not have surround sound effects such as Karaoke discs.
- When playing MTS broadcast titles.
≥The disc may have a restriction on the method of audio output. Refer to the disc’s jacket.
–
–
Cannot switch audio.
≥You cannot change the audio type when a DVD-R, a DVD-RW (DVD-Video format) or a +R is
in the disc tray.
≥You cannot change the audio type when playing a DVD-R, a DVD-RW (DVD-Video format) or
a +R. (You can select “Main” or “Secondary Audio Program (SAP)” in “Select MTS” in the
SETUP menu before recording.)
42
≥You have used a digital connection. Set “Dolby Digital” to “PCM” or connect using audio
cables (analog connection).
14, 42
≥There are discs whose audio cannot be changed because of how the disc was created.
–
DVD Play
Page
Play fails to start even when
[1, PLAY] is pressed.
Play starts but then stops
immediately.
≥Insert the disc correctly with the label facing up.
≥The disc is dirty.
≥You tried to play a blank disc or a disc that is unplayable on the unit.
≥You tried to play a +RW that needs to be finalized on the equipment used for recording.
≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD players
that are compatible with DVD-RAM. In this case use EP (6H) mode.
8
8
6, 7
–
41
Audio and video momentarily
pause.
≥This occurs between playlist chapters.
≥This occurs as scenes change during Quick View.
–
20
DVD-Video is not played.
≥Some DVD-Video cannot be played when you change the ratings level.
41
Alternative sound track and
subtitles cannot be selected.
≥Multiple languages are not recorded on the disc.
≥You may have to use the disc’s own menus to select languages.
–
20
No subtitles.
≥When progressive output is on, closed captions cannot be displayed.
≥Subtitles are not recorded on the disc.
–
–
≥Set “Subtitle” in the Disc menu to “On”.
38
Angle cannot be changed.
≥This function depends on software availability. Angles can only be changed during scenes
–
where different angles are recorded.
You have forgotten your ratings ≥With the tray open, keep pressing [¥, REC] and [1/k1.3] on the main unit simultaneously for
–
password.
about 5 or more seconds.
Quick View does not work.
≥This does not work when audio is other than Dolby Digital.
≥This does not work while recording.
–
–
The resume play function does ≥Memorized positions are canceled when the unit is turned off or when the tray is opened.
–
not work.
DVD Recording, scheduled recording
Page
Cannot record.
≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the
unit can record onto.
6
≥The disc is unformatted. Format the disc. [RAM] [-RW‹V›]
≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with
“DISC MANAGEMENT”.
31
30
≥Some programs have limitations on the number of times they can be recorded (CPRM).
≥The disc is full or nearly full. Erase unneeded titles or use another disc.
≥You cannot record on finalized DVD-R, DVD-RW (DVD-Video format), +R or DVD-RW
(DVD Video Recording format) discs.
6, 58
21, 30, 33
31
≥If you repeatedly insert discs or turn the unit on and off about 50 times or more, the
recording or editing of DVD-R, DVD-RW (DVD-Video format), +R may be disabled.
≥A DVD-R, DVD-RW (DVD-Video format), +R recorded on the unit may not be recordable
on other Panasonic DVD recorders.
–
–
≥The material you are trying to record is copy-protected.
–
–
A part or whole of a recorded
title has been lost.
≥If the power shuts down or the plug is disconnected from the household AC outlet while
recording or editing, the program may be lost or the disc may become unusable. We cannot
offer any guarantee regarding lost titles or discs. You will have to format the disc
([RAM] [-RW‹V›]) or use a new disc.
The DV automatic recording
function does not work.
≥If images cannot be recorded or if the recording is aborted, check the connections and DV
equipment settings.
57
≥You cannot start recording until the images from the DV equipment appear on the TV.
≥Recording may not be performed as desired if the time codes on the tape in the DV
equipment are not successive.
–
–
≥Depending on the equipment, the DV automatic recording may not operate properly.
–
64
VQT0R73
Reference
DVD VHS
DVD Edit
Page
Cannot format.
≥The disc is dirty. Wipe with a damp cloth and then wipe dry.
≥You tried formatting a disc that is not compatible with the unit.
8
7
Cannot create chapters.
≥The unit writes the chapter division information to the disc when you turn it off or remove
the disc. The information is not written if there is an interruption in the power before this.
≥These operations are not possible with still pictures.
–
–
35
–
Cannot erase chapters.
≥
The available recording time
doesn’t increase even after
≥Available recording space on the DVD-R or the +R does not increase even after erasing
previously recorded titles.
erasing recordings on the disc. ≥Available recording space on a DVD-RW (DVD-Video format) increases only when the last
–
recorded title is erased. It does not increase if other titles are erased.
∫ VHS
VHS Picture
Page
OSD messages do not appear.
≥Go to “Display” and select “Automatic” in “Status Messages”.
≥Press [STATUS] to show the on-screen messages constantly.
43
53
The blue background appears
during play.
≥You are playing a blank or poor quality part of the tape.
≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue
background to appear. Consult your dealer.
–
–
Picture is distorted.
≥When the unit starts making a scheduled recording on the DVD during VHS playback,
–
some picture distortion may occur. This does not indicate a problem with the unit.
Cannot see the picture.
≥When the TV is connected to the DVD PRIORITY output terminal on this unit, you cannot
watch pictures played back on VHS while recording, or making a scheduled recording, on
the DVD. Connect to the DVD/VHS COMMON output terminals to be able to watch pictures
played back on VHS.
14
VHS Sound
Page
Cannot hear the desired audio type. ≥Press [AUDIO] to select the audio.
53
There is noise when playing a
video tape.
≥Adjust the tracking.
≥The tape is old or damaged.
48
–
VHS Play
Page
Cannot play.
≥
Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.) cannot be played.
–
The playback screen flickers.
≥The video head is dirty.
≥The tape is too old or damaged.
–
–
VHS Recording, scheduled recording
Page
≥The erasure prevention tab has been removed. Cover the hole with adhesive tape.
≥Insert a video cassette.
46
46
“
” flashes when I try to start
recording.
Cannot record.
Cannot record TV program.
≥The desired channel is not selected. Select the desired TV program.
49, 50
Product Service
1. Damage requiring service — The unit should be serviced by qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged; or
(b)Objects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked change in performance; or
(e)The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts — When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the
same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check — After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
∫ Product information
For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” on page 66.
authorized Servicentre closest to you.
User memo:
The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
MODEL NUMBER
SERIAL NUMBER
DMR-ES40V
TELEPHONE NUMBER
65
VQT0R73
Reference
Limited Warranty (ONLY FOR U.S.A.)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic DVD Recorder
Limited Warranty
Limited Warranty Coverage
Limited Warranty Limits And Exclusions
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively
referred to as “the warrantor”) will, for the length of the period indicated on the chart below,
which starts with the date of original purchase (“warranty period”), at its option either (a)
repair your product with new or refurbished parts, or (b) replace it with a new or a
refurbished product. The decision to repair or replace will be made by the warrantor.
This warranty ONLY COVERS failures due to defects in materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES
NOT COVER damages which occurred in shipment, or failures which are caused by
products not supplied by the warrantor, or failures which result from accidents, misuse,
abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or
other business), rental use of the product, service by anyone other than a Factory
Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.
Product or Part Name
Parts
Labor
DVD Recorder
One (1) Year
One (1) Year
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY. (As examples, this excludes damages for lost time, travel
to and from the servicer, loss of media or images, data or other recorded
content. The items listed are not exclusive, but are for illustration only.) ALL
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Rechargeable Batteries,
DVD-RAM Disc (in
exchange for defective
item)
Ten (10) Days
Not Applicable
During the “Labor” warranty period there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. You must carry-in or mail-in your product
during the warranty period. If non-rechargeable batteries are included, they are not
warranted. This warranty only applies to products purchased and serviced in the United
States or Puerto Rico. This warranty is extended only to the original purchaser of a new
product which was not sold “as is”. A purchase receipt or other proof of the original purchase
date is required for warranty service.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts,
so the exclusions may not apply to you.
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States call 1-800-211-PANA (7262) or visit
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax
(787)-768-2910.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. If a problem with this product develops
during or after the warranty period, you may contact your dealer or Servicenter.
If the problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS
LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts
and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
For hearing or speech impaired TTY users, TTY : 1-877-833-8855
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
66
VQT0R73
Reference
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a
period as stated below from the date of original purchase.
Panasonic DVD Recorder One (1) year, parts and labour
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic service facility.
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to
usage for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any
way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries
are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required
before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of
implied warranties, so the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
FOR PRODUCT OPERATION ASSISTANCE, please contact:
Our Customer Care Centre:
Telephone #:
1-800 #:
(905) 624-5505
1-800-561-5505
Fax #:
(905) 238-2360
Email link:
FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at www.panasonic.ca :
TM
Link : “Servicentres locator” under “Customer support”
Panasonic Factory Service:
Richmond, British Columbia
Panasonic Canada Inc.
12111 Riverside Way
Richmond, BC V6W 1K8
Tel: (604) 278-4211
Mississauga, Ontario
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, ON L4W 2T3
Tel: (905) 624-8447
Fax: (905) 238-2418
Fax: (604) 278-5627
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
67
VQT0R73
Reference
Specifications
∫Audio system
Recording system: Dolby Digital (XP/SP/LP/EP)
Input:
∫Power Supply:
∫Power Consumption: 29 W
AC 120 V, 60 Hz
LINE (pin jack) k 2
Reference input: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Input impedance: 22 k≠
LINE (pin jack) k 2: one is DVD PRIORITY
Reference output: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Output impedance: 1 k≠
∫Recording system: DVD Video Recording format (DVD-RAM)
DVD-Video format (DVD-R)
DVD-Video format (DVD-RW)
Output:
∫Recordable discs:
DVD-RAM:
Ver. 2.0
Ver. 2.1/3k-SPEED DVD-RAM Revision 1.0
Ver. 2.2/5k-SPEED DVD-RAM Revision 2.0
DVD-R:
for General Ver. 2.0
for General Ver. 2.0/4k-SPEED DVD-R Revision 1.0
for General Ver. 2.x/8k-SPEED DVD-R Revision 3.0
(Load impedance: 10 k≠)
Number of
channels:
Recording: 2 channels
Playback: 2 channels
Other input/output
connectors:
Digital audio optical output connector
DVD-RW:
Ver. 1.1
∫Dimensions:
Approx. 430 mm (W)k89 mm (H)k353 mm (D)
[Approx. 1615/16q (W)k38/16q (H)k1314/16q (D)]
Approx. 5.4 kg (12.0 lbs.)
Ver. 1.1/2k-SPEED DVD-RW Revision 1.0
Ver. 1.2/4k-SPEED DVD-RW Revision 2.0
+R:
Ver. 1.0
Ver. 1.1
Ver. 1.2
Mass:
Operating
temperature range: 5 oC to 40 oC (41 oF to 104 oF)
Operating humidity
range:
Clock unit:
35% to 80% RH (no condensation)
Quartz-controlled 12-hour digital display
∫Recording time:
Max. 8 hours (using 4.7 GB disc)
Power consumption Standby mode: Approx. 10 W
XP: 60 minutes,
SP: 120 minutes
LP: 240 minutes, EP: 360 minutes or
480 minutes
∫DV Input:
IEEE1394 Standard (4 pin)
∫Playable discs:
DVD-RAM, DVD-R, DVD-RW, +R, +RW,
DVD-Video, CD-Audio (CD-DA), Video CD,
CD-R/CD-RW (CD-DA, Video CD, MP3,
JPEG formatted discs)
Note
Mass and dimensions shown are approximate.
Specifications are subject to change without notice.
∫Optical pick-up:
System with 1 lens, 2 integration units
(662 nm wavelength for DVDs,
780 nm wavelength for CDs)
∫LASER Specification
Class 1 LASER Product
Wave Length:
Laser Power:
780 nm (CDs), 662 nm (DVDs)
No hazardous radiation is emitted with the
safety protection
∫Video system
TV system:
NTSC system, 525 lines, 60 fields
Recording system: MPEG2 (Hybrid VBR)
Input:
LINE (pin jack) k 2: 1.0 Vp-p; 75 ≠
S connector k 2:
Y: 1.0 Vp-p; 75 ≠
C: 0.286 Vp-p; 75 ≠
Output:
LINE (pin jack) k 2: one is DVD PRIORITY
1.0 Vp-p; 75 ≠
S connector k 1: DVD PRIORITY
Y: 1.0 Vp-p; 75 ≠
C: 0.286 Vp-p; 75 ≠
Component video
output (480p/480i): DVD PRIORITY
Y: 1.0 Vp-p; 75 ≠
PB: 0.7 Vp-p; 75 ≠
PR: 0.7 Vp-p; 75 ≠
D-connector output: Not provided
Antenna reception
input:
TV Channel:
2 ch to 69 ch, 75 ≠
CATV Channel:
1 ch to 125 ch, 75 ≠
68
VQT0R73
Reference
Index
PCM Down Conversion................................................................. 42
Picture ........................................................................................... 39
playlist ........................................................................................ 37
title.............................................................................................. 33
cartridge ..................................................................................... 30
disc............................................................................................. 30
title.............................................................................................. 34
Repeat play ................................................................................... 39
Restore Default Settings ............................................................... 41
Scheduled recording ..................................................................... 28
SETUP menu ................................................................................ 40
Sound track ................................................................................... 38
Transfer......................................................................................... 39
V.S.S. ............................................................................................ 39
Antenna System ............................................................................16
Channel
adding, deleting ..........................................................................16
audio (DVD)................................................................................38
Auto Channel Setting..................................................................16
captions ......................................................................................17
guide channel VCR Plus_ system .............................................16
Cleaning
Clock setting ..................................................................................44
Connection
amplifier, system component......................................................14
antenna.......................................................................................13
antenna, television......................................................................12
cable TV box/satellite receiver....................................................13
external device............................................................................57
On-screen Language.....................................................................43
Status displays........................................................................45, 53
Audio ............................................................................................. 53
Auto Bilingual Choice .................................................................... 53
Auto SP/EP mode ......................................................................... 51
On-screen display ......................................................................... 53
One Touch Transfer (Dub) ............................................................ 56
Remaining tape time ..................................................................... 53
Repeat Playback ........................................................................... 48
Scheduled recording ..................................................................... 50
SQPB ............................................................................................ 48
Tracking......................................................................................... 48
VISS .............................................................................................. 52
VP mode........................................................................................ 49
Angle..............................................................................................38
Audio
attributes.....................................................................................38
channel .......................................................................................38
playback......................................................................................21
receiving, recording ....................................................................25
Change Thumbnail ........................................................................34
Chasing play..................................................................................26
CPRM system...........................................................................6, 58
Create chapters ......................................................................21, 35
Display menus ...............................................................................38
DV Automatic Recording ...............................................................27
Enter Name
disc .............................................................................................30
operation.....................................................................................32
Erase
Finalize ...................................................................................31, 58
Flexible Recording.........................................................................25
Format disc....................................................................................31
FUNCTIONS window.....................................................................45
Language
audio...........................................................................................41
code list.......................................................................................43
sound track .................................................................................38
subtitle .................................................................................38, 41
MP3 ...............................................................................................22
MPEG-DNR ...................................................................................39
One Touch Transfer (Dub).............................................................55
69
VQT0R73
Español
Cómo empezar
≥Antes de conectar, apague todo equipo y lea las instrucciones correspondientes de funcionamiento.
Referencia
≥Las conexiones del equipo descritas sirven en concepto de ejemplo.
≥Los equipos periféricos y los cables opcionales se venden por separado si no está indicado de otro modo.
Conexión con un televisor y un VCR
indica los accesorios incluidos.
indica los accesorios no incluidos.
Cable del
televisor
Antena al
aire libre
Antena
interior
Rojo
Blanco
Amarillo
Conecte por orden numérico de 1 a 3.
Cable de la antena
La unidad envía una señal al televisor a través del cable coaxial de
75 ≠ en el canal 3 o 4. Es posible ver la imagen de vídeo en su
televisor de la misma manera que la que ve en los programas TV.
≥Después de esta conexión, ajuste el canal de salida RF “CH3” o
“CH4” (l 71).
AUDIO IN
VHF/UHF
RF IN
VIDEO IN
R
L
TV
Partidor
Utilice un partidor si
quiere también conectar
la antena a su VCR.
∫Conexión (con cable audio/vídeo)
Conecte por orden numérico de 1 a 4.
≥Conecte por orden numérico, ajuste “OFF” del canal de salida RF
(l 71).
1
75 ≠ cable coaxial
Cable Audio/Vídeo
1
2
3
2
RF IN
COMPONENT VIDEO OUT (480p/480i)
DIGITAL AUDIO OUT
- AUDIO - L
VIDEO
VIDEO
Y
PB
PR
(PCM/BITSTREAM)
S VIDEO
S VIDEO
T
OPTICAL
R - AUDIO - L
VIDEO
R - AUDIO - L
Al IN1
75 ≠ cable coaxial
Ventilador de refrigeración
3
Cable Audio/Vídeo
4
A la toma doméstica CA
(CA 120 V, 60 Hz)
Grabadora de
cassette de vídeo
Cable de alimentación CA
Sólo conecte a la toma de CA doméstica después
de terminar todas las demás conexiones.
R
L
VIDEO
VHF/UHF
RF IN
AUDIO OUT OUT
∫ Conexión al terminal S-VIDEO IN
Terminal S-VIDEO OUT
∫
Conexión a los terminales COMPONENT VIDEO IN
Terminales COMPONENT VIDEO OUT
El terminal S-VIDEO OUT hace conseguir una imagen más nítida
que el terminal VIDEO OUT. (Los resultados reales dependen del
televisor.)
Estos terminales pueden ser usados para la salida sea entrelazada
sea progresiva y para proporcionar una imagen más nítida que el
terminal de S-VIDEO OUT.
≥Conecte a los terminales del mismo color.
TV
(1) Terminales de entrada de audio (L/R)
TV
(1)
(2)
(2) Terminal de entrada S-Vídeo
(3) Cable de audio (no suministrado)
A Rojo (R)
(1)
(2)
(1) Terminales de entrada componente
(2) Terminales de entrada de audio (L/R)
(3) Cable de vídeo del componente
(no suministrado)
(4) Cable de audio (no suministrado)
A Rojo (R)
AUDIO IN
AUDIO IN
R
L
VIDEO IN
COMPONENT
S
VIDEO IN
R
L
VIDEO IN
B Blanco (L)
(4) Cable S-Vídeo (no suministrado)
(5) Panel trasero de la unidad
(6) Terminales de salida de audio (L/R)
(7) Terminal de salida S-Vídeo
(4)
(3)
(5)
(3)
(4)
B Blanco (L)
CMPONEVIDEO OUT (480p
DIGITAL AUDIO OUT
PONEIDEO (480p/48)
(5) Panel trasero de la unidad
(6) Terminales COMPONENT VIDEO
OUT
AUDIO OUT
ITSTREAM)
R
-
AUDIO
-
-
L
L
VIDEO
VIDEO
Y
P
PR
(PCM/BITSTREAM)
R
R
-
-
AUDIO
AUDIO
-
-
L
L
VIDEO
VIDEO
(6)
S
O
OPTICAL
(6)
(7)
R
-
AUDIO
-
L
VIDEO
UDIO
(7)
-
AUDIO
-
(5)
(7) Terminales de salida de audio (L/R)
∫
Cuando la unidad no ha de ser usada durante un largo tiempo
∫Accionamiento rápido
unidad consuma una pequeña cantidad de corriente aun cuando
está apagada.
Inicio rápido de 1 s. para grabar en el DVD-RAM°
° Cuando la unidad está apagada, pulsar [Í, DVD/VHS POWER] y
después [¥, REC] (Modo de Accionamiento rápido).
La grabación en el DVD-RAM inicia cerca de 1 segundo después
de pulsar estas teclas.
Consumo de corriente en la espera
Visualización frontal
Automático
Aprox. 9 W
Alta
Act
Aprox. 11 W
Aprox. 2,1 W
Accionamiento
rápido
70
VQT0R73
Des
Aprox. 2,1 W
Cómo empezar
Ajustes del canal de guía para el sistema
VCR Plus+
DVD/VHS POWER
TV
POWER
Í
VOLUME
Ajuste estos canales de guía de manera que se pueda usar el
CH
INPUT SELECT TV/VIDEO
®
sistema VCR Plusi para la grabación temporizada. Antes de
proceder a los ajustes, prepare el papel que muestra los nombres de
las estaciones, los canales de guía y los números de los canales.
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
CH, W, X
por ej.: Nombre de la Canal de Número
Ajuste del canal
AUDIO
estación
CBS
guía
°
del canal°°
CANCEL/RESET
VCR Plus+
04
04
Innecesario
CM SKIP
SLOW/
REW SEARCH FF
Introduzca el canal 15
SKIP/INDEX
HBO
33
38
15
20
sucesivo al canal de guía 33.
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
PLAY
Introduzca el canal 20
sucesivo al canal de guía 38.
FUNCTIONS
RETURN
Nickelodeon
3, 4, 2, 1
° Mire en los canales de guía para las estaciones en revistas.
°° Apunte todas las estaciones que puede recibir.
≥Si ha conectado una caja de televisor de cable o un receptor de
satélite, el sistema VCR Plusi no funciona, así que no debe
ajustar los canales de guía.
ENTER
SUB MENU
RETURN
S
TIME SLIP
JET REW
SCHEDULE
DISPLAY
STATUS
REC
REC MODE DVD ERASE ADD/DLT
CREATE
[1] Durante la parada
µ
Pulse [FUNCTIONS].
COPYING
F.REC
CHAPTER
VHS
DVD
[2] Seleccione “Otras funciones” con [3, 4] y pulse [ENTER].
[3] Seleccione “SETUP” con [3, 4] y pulse [ENTER].
[4] Seleccione “Canal” con [3, 4] y pulse [2, 1].
[5] Seleccione “VCR Plusr Ajuste canal” con [3, 4], luego
pulse [ENTER].
[6] Utilice [3, 4] para seleccionar el canal de guía que quiere
ajustar y pulse [1].
[7] Utilice [3, 4] para seleccionar el canal correspondiente al
de guía y pulse [2].
Sintonización automática por enchufe
Operaciones preliminares
≥Pulse [DVD].
≥Encienda el televisor y seleccione la entrada de vídeo
correspondiente para conformar las conexiones a esta unidad.
(Por ejemplo: la entrada AV, CH3 o CH4)
≥Si conecta la unidad a una caja del televisor de cable o a un
receptor de satélite, sintonice su PBS local para que funcione el
ajuste automático del reloj. Si no hay PBS local, ajuste el reloj
manualmente (“Ajustar manualmente el reloj”).
≥Para borrar un número, pulse [CANCEL/RESET, ¢].
≥Repita los pasos 6 y 7 para introducir otros canales.
[8] Pulse [ENTER].
[1] Pulse [Í, DVD/VHS POWER].
Selección del tipo de televisor
No debe cambiar el ajuste cuando está conectado a un televisor que
tiene el aspecto estándar de 4:3 y no es compatible con la salida
progresiva.
Select Language
Seleccione el idioma
Sélection de Langue
English
Español
Français
Press ENTER
Pulse ENTER
Appuyer sur ENTER
[1] Durante la parada
Pulse [FUNCTIONS].
[2] Seleccione “Otras funciones” con [3, 4] y pulse [ENTER].
[3] Seleccione “SETUP” con [3, 4] y pulse [ENTER].
[4] Seleccione “Pantalla TV” con [3, 4] y pulse [2, 1].
[5] Seleccione “Tipo TV” con [3, 4], luego pulse [ENTER].
≥Aspecto 4:3/Aspecto 16:9:
[2] Pulse [CH, W, X] para seleccionar un número de canal de
salida RF.
Visualización de la unidad
Conexión (sin cable audio/vídeo):
Seleccione “CH3” o “CH4” que visualiza
la pantalla a la derecha.
Conexión (con cable audio/vídeo):
Seleccione “OFF”.
Televisor de aspecto
estándar 4:3
Televisor de pantalla
panorámica 16:9
4:3
16:9
≥480p/480i:
Visualización de la unidad
Cada vez que pulsa la tecla:
CH 3 (ajuste predeterminado) ,. CH4 ,. OFF
^------------------------------------------------------------J
Seleccione “480p” si el televisor es compatible con la salida
progresiva.
[6] Utilice [3, 4] para seleccionar el detalle, luego pulse
[ENTER].
[3] Utilice [3, 4] para seleccionar el idioma y pulse [ENTER].
[4] Pulse [ENTER] para iniciar la sintonización automática por
enchufe.
≥Cuando está seleccionada una salida progresiva aparece una
pantalla de confirmación con las instrucciones que seguir.
Para volver a la pantalla anterior
Pulse [RETURN].
Para salir de la pantalla
Pulse varias veces [RETURN].
≥Luego, la unidad procede al ajuste automático del reloj. El
temporizador se visualiza cuando finaliza.
[5] Pulse [ENTER].
Si el reloj adelanta o atrasa una hora respecto a la hora actual
Seleccione “j1” o “i1” en “Ajustar del huso horario” en el menú
SETUP.
Si la unidad no puede ajustar automáticamente el reloj
Ajuste la hora manualmente. (“Ajustar manualmente el reloj”)
71
VQT0R73
DVD
Reproducción
DVD
∫Para detener la reproducción
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
Durante la reproducción
DVD/VHS POWER
TV
POWER
Í
Pulse [∫, STOP].
VOLUME
CH
INPUT SELECT TV/VIDEO
≥La posición de parada se memoriza. (Excepto si se reproduce
desde el Direct Navigator y cuando se reproduce de una lista.)
Función de reanudación de la reproducción
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
Pulse [1, PLAY] para reanudar la reproducción desde esta posición.
Teclas
CH, W, X
Posición de parada
numéricas
AUDIO
≥Si se pulsa [∫, STOP] más veces, la posición se borra.
≥La posición se borra si la unidad se apaga o si la bandeja está
abierta.
CANCEL/RESET
VCR Plus+
CM SKIP
CM SKIP
SLOW/
SKIP/INDEX
REW
SEARCH FF
:, 9
6, 5
PLAY
∫Para interrumpir provisionalmente la reproducción
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
Durante la reproducción
1
;
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
Pulse [;, PAUSE].
3, 4, 2, 1
2;, ;1
ENTER
≥Pulse de nuevo o [1, PLAY] para reiniciar la reproducción.
SUB MENU
RETURN
∫Cuando en el televisor aparece la pantalla de un menú
[VCD]
Pulse las teclas numéricas para seleccionar un detalle.
S
TIME SLIP
JET REW
SCHEDULE
DISPLAY
STATUS
TIME SLIP
por ej.:
“5”: [0] )[5]
“15”: [1] )[5]
REC
REC MODE DVD ERASE ADD/DLT
CREATE
[DVD-V]
DVD ERASE
CREATE CHAPTER
COPYING
VHS
VCR/TV
CHAPTER
Pulse [3, 4, 2, 1] para seleccionar un detalle, luego pulse
[ENTER].
DVD
≥Algunas veces para seleccionar un detalle puede usar las teclas
numéricas.
∫IIntroducción de discos
[1] Pulse [<, OPEN/CLOSE] en la unidad principal para abrir la
bandeja.
≥Puede Ud. insertar un disco de cartucho o sin cartucho.
[2] Pulse [<, OPEN/CLOSE] en la unidad principal para cerrar la
bandeja.
Otros botones usados para hacer funcionar los menús
Lea las instrucciones del disco para más información acerca del
funcionamiento.
Nota
Nota
≥Si aparece “ ” en el televisor, la unidad o el disco prohiben la
operación.
≥Tiene que cargarse un disco de doble cara con el lado que quiere
grabar/reproducir mirando hacia abajo.
≥No es posible grabar continuamente de un lado de un disco de
doble cara al otro. Es necesario que se expulse el disco y se lo
revuelva.
∫Vista rápida (Reproducción t1.3)
[RAM]
Puede ser aumentada la velocidad de
reproducción sin distorsionar el audio.
Durante la reproducción
DVD-RAM
Reproducir
DVD-RAM
Repr. x1.3
≥Cuando utiliza un DVD-RAM de 8 cm (3q) o DVD-R de 8 cm (3q),
quite el disco del cartucho.
Disco sin cartucho
Disco de cartucho
Pulse y mantenga [1, PLAY].
(1)
(2)
Para volver a la velocidad normal
Pulse [1, PLAY].
∫Avance rápido y rebobinado — SEARCH
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
Durante la reproducción
DVD
Pulse [6, SLOW/SEARCH] o [5, SLOW/SEARCH].
≥Hay 5 velocidades de búsqueda. Cada vez que se
pulsa la tecla la velocidad de búsqueda aumenta.
≥Pulse [1, PLAY] para volver a iniciar la reproducción.
(3)
(1) Inserte etiqueta arriba.
DVD-RAM
•
•
•
•
5
(2) Insértelo completamente en su lugar hasta que haga un ruido
k2
seco.
(3) Insertar el disco con la etiqueta hacia arriba y la flecha hacia
el interior.
∫Salto
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
Durante la reproducción o mientras está en pausa
Pulse [:, SKIP] o [9, SKIP].
Reproducción de los discos
≥Cada presión hace aumentar el número de saltos.
Operaciones preliminares
∫Reproducción de cámara lenta
[RAM] [-R] [-RW‹V›] [+R] (Sólo partes de imagen en movimiento)
[DVD-V] [-RW‹VR›] [VCD]
≥Encienda el televisor y seleccione la entrada de vídeo
correspondiente para conformar las conexiones a esta unidad.
≥Pulse [DVD].
Durante la pausa
Pulse [6, SLOW/SEARCH] o [5, SLOW/SEARCH].
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
[1] Pulse [Í, DVD/VHS POWER] para encender la
unidad.
[2] Inserte un disco. (l arriba)
≥Cuando continúa la reproducción de cámara lenta durante cerca
de 5 minutos, ella se detiene automáticamente
(excepto [DVD-V] [VCD]).
≥Hay 5 velocidades de reproducción. Cada vez que se pulsa la tecla
la velocidad de reproducción aumenta.
≥La bandeja se cierra y comienza la reproducción.
(La unidad emplea un tiempo para la adquisición de los datos
del disco antes de comenzar la reproducción.)
≥La reproducción inicia desde el último título grabado.
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
≥Pulse [1, PLAY] para volver a iniciar la reproducción.
≥[VCD] Sólo dirección en avance ([5, SLOW/SEARCH]).
≥La reproducción inicia a partir del comienzo del disco.
[DVD-V] [VCD] [CD]
72
VQT0R73
Reproducción
DVD
∫Visión cuadro por cuadro
∫Visualización de la imagen TV como imagen en
[RAM] [-R] [-RW‹V›] [+R] (Sólo partes de imagen en movimiento)
[DVD-V] [-RW‹VR›] [VCD]
Durante la pausa
imagen/Selección de la cantidad de tiempo a saltar —
Time Slip
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
Pulse [2;] ([2]) o [;1] ([1]).
Pulse [TIME SLIP] durante la reproducción y abajo a la derecha de
la pantalla principal se va a visualizar la pantalla (imagen del
televisor) del PIP (de imagen en imagen). Puede ver al mismo
tiempo tanto la reproducción de imágenes como las imágenes del
televisor. En la pantalla principal, puede también acceder
inmediatamente a una escena que quiere ver especificando un
cierto tiempo que quiere saltar.
≥Cada vez que se pulsa aparece el cuadro siguiente o el anterior.
≥Mantenga pulsado para cambiar sucesivamente hacia delante o
hacia atrás.
≥Pulse [1, PLAY] para volver a iniciar la reproducción.
≥[VCD] Sólo dirección en avance ([;1], [1]).
∫Reproducción directa
[1] Durante la reproducción
Reproducir
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›] [VCD] [CD]
Puede reproducir desde el título, capítulo o pista que selecciona.
Durante la reproducción
Pulse las teclas numéricas para seleccionar el detalle.
[CD] (Sólo disco MP3 y JPEG)
(1)
0 min
Pulse [TIME SLIP].
≥Aparece la pantalla PIP (imágenes del
televisor).
≥Puede cambiar el canal que está
Canal 8
(2)
recibiendo pulsando [CH, W, X].
por ej.: “5”: [0] )[5]
“5”: [0] )[0] )[5]
(1) Imágenes reproducidas
≥Escuchará el audio de la reproducción
(2) Imágenes actuales en
“15”: [1] )[5]
“15”: [0] )[1] )[5]
de la pantalla principal.
recepción
Salva pantalla
[2] Mientras observa el indicador del
≥Éste sólo funciona con algunos discos cuando
está parada (está visualizado el salva pantalla l
a la derecha).
tiempo arriba a la derecha
Reproducir
Pulse [3, 4] para ajustar el tiempo a
–5 min
saltar, luego pulse [ENTER].
≥La reproducción salta por el tiempo
Canal 8
que ha especificado.
∫Borrado de un título que se está reproduciendo
≥El indicador del tiempo se apagará a
los 5 segundos aproximadamente, pero ajustando el tiempo
volverá a encenderse.
[RAM] [-R] [-RW‹V›] [+R]
Una vez borrado el título no puede ser restablecido. Asegúrese
antes de proceder.
[1] Durante la reproducción
Pulse [DVD ERASE].
[2] Pulse [2] para seleccionar “Borrar” y pulse [ENTER].
Para despejar la pantalla PIP
Pulse [TIME SLIP].
Referencia
∫Salto CM
≥El fondo azul no aparece en la pantalla PIP.
≥No se puede cambiar el canal recibido mientras se va grabando.
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
Puede saltar por cerca de 1 minuto por cada vez que se pulsa.
Durante la reproducción
Pulse [CM SKIP].
∫Crear capítulos
[RAM]
Durante la reproducción o mientras está en pausa
Pulse [CREATE CHAPTER].
≥Pulse [:, SKIP] o [9, SKIP] para saltar al comienzo del
capítulo.
≥No puede activar esta función cuando está ejecutando TIME SLIP
(l 75) o envía (copia).
73
VQT0R73
Grabación
DVD
[5] Pulse [¥, REC] para iniciar la grabación.
≥No es posible cambiar de canal o el modo durante la
grabación. Es posible cambiarlos cuando la grabación se
encuentra en pausa, pero el material que sigue se grabará con
un título separado.
DVD/VHS POWER
TV
CH, W, X
POWER
Í
VOLUME
CH
INPUT SELECT TV/VIDEO
TV/VIDEO
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
Para detener temporalmente la grabación
Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la
grabación.)
≥El título no puede dividirse en un título separado.
≥Puede pulsar también [¥, REC] para reiniciar a grabar.
CH, W, X
Teclas
numéricas
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
SLOW/
SKIP/INDEX
REW SEARCH FF
Para detener la grabación
Pulse [∫, STOP].
PLAY
1
;
≥Grabado como 1 título hasta donde se detiene la posición.
≥Una vez terminada la grabación, lleva más o menos 30 segundos
para que la unidad complete la información de gestión de la
grabación. [-R] [-RW‹V›] [+R]
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
DIRECT NAVIGATOR
3, 4, 2, 1
∫Modos de grabación y tiempo aproximado de
ENTER
SUB MENU
RETURN
TIME SLIP
grabación
S
(Unidad: hora)
SCHEDULE
DISPLAY
STATUS
JET REW
DVD-RAM
DVD-R
DVD-RW
+R
TIME SLIP
REC
REC MODE DVD ERASE ADD/DLT
CREATE
De un solo Doble lado
µ
REC MODE
VCR/TV
lado
(9,4 GB)
DUBBING
VHS DVD
VCR/TV
CHAPTER
(4,7 GB)
(4,7 GB)
XP (Alta calidad)
SP (Normal)
1
2
4
2
4
8
1
2
4
Grabación de programas televisivos
[RAM] [-R] [-RW‹V›] [+R]
LP (Larga duración)
≥Puede grabar hasta 99 títulos en un disco (49 títulos [+R]).
≥No es posible grabar emisiones digitales que permiten “Grabación
sólo una vez” en discos DVD-R, DVD-RW, iR o DVD-RAM de
8 cm (3q). Utilice un DVD-RAM compatible con CPRM.
≥La grabación tendrá lugar en un espacio abierto en el disco. Los
datos no se sobrescribirán.
EP (Reproducción de
muy larga duración)
8 (6°)
16 (12°)
8 (6°)
≥Según el contenido a ser grabado, los tiempos de grabación
pueden salir más cortos que los señalados.
° Cuando en el menú SETUP se ha ajustado a “EP-Repr.ón
ampliada (6H)” el “Tiempo de grab. en el modo EP”.
La calidad del sonido se baja, en comparación con otros modos
de grabación, cuando se usa “EP-Repr.ón ampliada (8H)”.
≥Si no queda espacio en el disco de grabación, será necesario
borrar los títulos innecesarios (l 73) o utilizar un nuevo disco.
Cuando graba en el DVD-R, DVD-RW (formato DVD-Vídeo) o
+R
∫Indicación del tiempo en que se parará la grabación
Durante la grabación
≥Cuando graba programas MTS
- Si no conecte una caja TV de cable
Pulse [¥, REC] para seleccionar el tiempo de grabación.
≥Se puede también pulsar [¥, REC] en la unidad principal.
Visualización de la unidad
Seleccione “Principal” o “Programa Audio Sec. (SAP)” en
“Seleccionar MTS” en el menú SETUP.
- Si conecte una caja TV de cable
Cada vez que pulsa la tecla:
Contador (suprimir) # OFF 0:30 # OFF 1:00 # OFF 1:30
^------- OFF 4:00 ! OFF 3:00 ! OFF 2:00 !----------}
Seleccione “Main” or “SAP” en la caja TV de cable.
≥La relación de aspecto de la imagen grabada será 4:3.
≥A fin de reproducir en otra fuente de reproducción un DVD-R,
DVD-RW (formato DVD-Vídeo) o +R grabado usando esta
unidad, antes el disco ha de ser finalizado.
∫Recepción de las transmisiones televisivas durante la
grabación
Operaciones preliminares
Operaciones preliminares
≥Quite la protección. [RAM]
≥Seleccione un tipo de audio que quiere grabar.
≥Pulse [DVD].
≥Conexión (sin cable audio/vídeo)
- Asegúrese de que el indicador TV esté encendido en la
visualización de la unidad. Por si no lo estuviese, pulse [VCR/TV]
para encenderlo.
≥Conexión (con cable audio/vídeo)
- Pulse [TV/VIDEO] para cambiar el modo de entrada en “TV”.
[1] Pulse [Í, DVD/VHS POWER] para encender la
unidad.
[2] Inserte un disco. (l 72)
Pulse [CH, W, X] del televisor para seleccionar los canales TV
deseados.
≥Cuando con esta unidad utiliza un DVD-RAM por la primera
vez, formatéelo para garantizar una esmerada grabación.
[3] Pulse [CH, W, X] para seleccionar el canal.
Para seleccionar con las teclas numéricas:
Modo Antena (Ondas hertzianas)
por ej.:
“5”: [0] )[5]
“15”: [1] )[5]
Modo Cable TV (Cable)
por ej.:
“5”: [0] )[0] )[5] “15”: [0] )[1] )[5]
[4] Pulse [REC MODE] para seleccionar el modo de
grabación (XP, SP, LP o EP).
74
VQT0R73
Grabación
DVD
∫ Reproducción durante la grabación
[RAM]
∫Reproducción seguida
Es posible empezar la reproducción desde el comienzo de un título
mientras lo sigue grabando.
Durante la grabación o la grabación temporizada
Pulse [1, PLAY].
≥La reproducción inicia mientras que procede la grabación.
∫Grabación y reproducción simultáneas
Puede reproducir un título grabado anteriormente mientras que está
grabando otro título.
[1] Durante la grabación o la grabación temporizada
Pulse [DIRECT NAVIGATOR].
[2] Utilice [3, 4, 2, 1] para seleccionar el título, luego pulse
[ENTER].
≥La reproducción inicia mientras que procede la grabación.
Para salir de la pantalla del Direct Navigator
Pulse [DIRECT NAVIGATOR].
∫TIME SLIP
Pulse [TIME SLIP] mientras que graba; la reproducción inicia a partir
de 30 segundos antes de aquel momento. Puede iniciar a reproducir
incluso antes indicando en el específico indicador un cierto tiempo a
saltar.
[1] Durante la grabación o la grabación
Reproducir
0 min
(1)
temporizada
Pulse [TIME SLIP].
≥Se visualiza la pantalla PIP (imágenes
que se están grabando actualmente).
≥En la pantalla principal, la
reproducción inicia a partir de
30 segundos antes de aquel
momento.
Grabar
(2)
(1) Reproduce las
imágenes
(30 segundos antes)
(2) Imagen que se está
grabando actualmentel
≥Escuchará el audio de la
reproducción.
[2] Mientras observa el indicador del
tiempo arriba a la derecha
Pulse [3, 4] para ajustar el tiempo a
saltar, luego pulse [ENTER].
≥La reproducción salta por el tiempo
que se ha seleccionado.
Reproducir
–5 min
Grabar
≥El indicador del tiempo se apagará a los 5 segundos
aproximadamente, pero ajustando el tiempo volverá a
encenderse.
Para visualizar completamente las imágenes de reproducción
Pulse [TIME SLIP].
≥Pulse [TIME SLIP] para volver a la pantalla PIP.
Referencia
≥Según la escena, la imagen de la pantalla PIP puede resultar
distorsionada o bien parpadear. Sin embargo, esto no afecta la
imagen grabada.
Para detener la reproducción y la grabación
[1] Pulse [∫, STOP]. La reproducción se detiene.
(Espere 2 segundos o más.)
[2] Pulse [∫, STOP]. La grabación se detiene.
≥No es posible detener la grabación con [∫, STOP] durante la
grabación temporizada. Para detener la grabación
temporizada pulse [∫, STOP], luego [ENTER] dentro de
5 segundos.
- Puede también seguir pulsando [∫] en la unidad principal
durante más de 3 segundos para detener la grabación
temporizada.
75
VQT0R73
Grabación
DVD
≥Act. (hora de encendido)/Des. (hora final)
Si mantiene pulsado el botón, el tiempo aumentará o
disminuirá en incrementos de 30 minutos.
≥Unid. (Unidad de grabación)
DVD/VHS POWER
TV
POWER
Í
VOLUME
CH
INPUT SELECT TV/VIDEO
Seleccione la unidad de grabación “DVD”.
≥Modo (Modo de grabación)
Para cambiar el modo de grabación, puede pulsar también
[REC MODE].
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
VHS
DVD
Teclas
numéricas
XP,.SP,.LP,.EP,.FR,.XP... (l 74)
AUDIO
≥Nombre tít.
Pulse [
2,
1] para seleccionar “Nombre tít.” luego pulse [ENTER].
VCR Plusi
CANCEL/RESET
VCR Plus+
CM SKIP
[3] Al terminar las correcciones pulse [ENTER].
SLOW/
SKIP/INDEX
REW SEARCH FF
≥Para continuar programando:
6, 5
PLAY
Seleccione “Nueva grabación programada” y repita los pasos 2–3.
[4] Pulse [SCHEDULE].
1
;
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
[5] Pulse [Í, DVD/VHS POWER].
≥La grabación temporizada sólo puede ser iniciada cuando la
3, 4, 2, 1
unidad está apagada.
La unidad se apaga y en el visualizador de la unidad se enciende “
para señalar que la espera de la grabación temporizada ha sido activada.
ENTER
≥
”
SUB MENU
RETURN
TIME SLIP
S
SCHEDULE
DISPLAY
STATUS
JET REW
∫
Para hacer salir la unidad de la espera de la grabación temporizada
Pulse [Í, DVD/VHS POWER].
Tenga cuidado de pulsar [ , DVD/VHS POWER] para que la unidad
6 JET REW
SCHEDULE
REC MODE
REC
REC MODE DVD ERASE ADD/DLT
CREATE
≥
Í
COPYING
VHS
VCR/TV
CHAPTER
vuelva al modo de espera antes de la hora de la grabación temporizada.
DVD
La grabación temporizada sólo funcionará si está visualizado “ ”.
Grabación temporizada
∫Para detener la grabación mientras un programa está
trabajando
[1] Pulse [DVD].
[2] Pulse [∫, STOP], luego [ENTER] dentro de 5 segundos.
≥Puede también mantener pulsado [∫] en el DVD de la unidad
principal durante 3 o más segundos para detener la grabación.
Puede introducir hasta 16 programas con un adelanto de un mes.
Operaciones preliminares
≥Quite la protección [RAM].
≥Inserte un disco (l 72) y asegúrese de que haya bastante espacio
vacío para grabarle encima.
≥Controle que el reloj esté ajustado a la hora correcta.
≥Pulse [DVD].
∫ Controle, cambie o borre el programa
Aun cuando la unidad está apagada, puede visualizar la lista de la
grabación temporizada pulsando [SCHEDULE].
∫ Uso del sistema VCR Plus+
®
El introducir los números PlusCode es una manera sencilla de
[1] Pulse [SCHEDULE].
[2] Pulse [3, 4] para seleccionar el programa.
grabación temporizada. Puede encontrar estos códigos en las guías
TV de los periódicos y revistas.
≥Cuando conecte una caja TV de cable o un receptor de satélite, el
sistema VCR Plusi no funciona. Programe la grabación
temporizada manualmente (l abajo).
[3] Pulse [CANCEL/RESET, ¢] para eliminar,
No es posible eliminar programas en fase de grabación.
o pulse [ENTER] para cambiar.
[1] Pulse [VCR Plus_].
Se visualiza la pantalla de ajuste de la grabación temporizada.
[2] Pulse las teclas numéricas para introducir el
número PlusCode.
[4] Si pulsa [ENTER] en el paso 3,
Utilice [3, 4, 2, 1] para cambiar luego pulse
[ENTER].
≥Pulse [2] para volver a la cifra correcta.
[3] Pulse [ENTER].
[5] Pulse [SCHEDULE].
≥Cerciórese del programa y, si lo necesita, corrija usando [3,
4, 2, 1]. (l abajo, paso 2)
∫
Para poner la unidad en espera de la grabación temporizada
Pulse [Í, DVD/VHS POWER].
La unidad se apaga y en el visualizador de la unidad se enciende “
para señalar que la espera de la grabación temporizada ha sido activada.
[4] Si el programa es correcto
Pulse [ENTER].
≥
”
≥Repita los pasos 1–4 para programar otras grabaciones.
Referencia
[5] Pulse [SCHEDULE].
≥Los programas cuya grabación no tuvo éxito no se borran
inmediatamente de la lista (destacados en gris), pero se borran
automáticamente a las 4 de la mañana 2 días después.
≥Durante la grabación temporizada puede cambiar el tiempo final
mientras el modo de grabación no es “FR”.
[6] Pulse [Í, DVD/VHS POWER].
≥La grabación temporizada sólo puede ser iniciada cuando la
unidad está apagada.
La unidad se apaga y en el visualizador de la unidad se enciende “
≥
”
para señalar que la espera de la grabación temporizada ha sido activada.
∫
Precauciones al usar la grabación temporizada en DVD y VHS
∫ Programación manual
La grabación temporizada inicia automáticamente a la hora
establecida.
≥Cuando se conecte una caja TV de cable o un receptor de satélite,
seleccione el canal en la caja TV de cable o receptor de satélite
antes de que comience la grabación temporizada.
≥La grabación temporizada sólo puede ser iniciada cuando la
unidad está apagada. Cerca de un 1 minuto antes de que inicie la
grabación temporizada, la unidad se enciende. Cuando termine,
la unidad vuelve a apagarse. Por si hay también otro programa a
ser reproducido, la unidad no vuelve a apagarse.
[1] Pulse [SCHEDULE].
≥
Cerciórese de que esté seleccionado “Nueva grabación programada”.
La grabación temporizada no puede activarse en DVD y VHS
conjuntamente.
detalles usando [3, 4, 2, 1].
≥Pueden usarse las teclas numéricas para introducir “Canal”,
Verifique si el tiempo inicial de la grabación temporizada no se
superpone en la pantalla de programación temporizada tanto del
DVD (l arriba) como del VHS (l 79).
Cuando se superponen los ajustes de la grabación temporizada:
≥Cuando el tiempo inicial de las dos grabaciones temporizadas es
el mismo, la última tiene la prioridad.
“Fecha”, “Act.” y “Des.”.
≥Canal (Posición del programa/Nombre de la estación de TV)
≥Fecha
Puede crear usted un programa diario o semanal.
Todos los programas diarios o semanales se cuentan como un
solo programa.
76
VQT0R73
VHS
Reproducción
VHS
∫Introducción de un cassette de
vídeo
La superficie en la que puede ver el
rollo de la cinta tiene que mirar hacia
arriba.
∫Para expulsar el cassette de vídeo
≥Puede expulsar el cassette de vídeo cuando la unidad está en el
modo de espera. Ésta vuelve en espera una vez que haya
expulsado el cassette de vídeo.
Por lo que respecta a la unidad principal
≥Pulse [<, EJECT] en la unidad principal.
Inserte un cassette de vídeo.
≥Esta unidad se enciende
automáticamente.
Por lo que respecta al mando a distancia
≥Pulse [VHS] luego mantenga pulsado [∫, STOP] durante
3 segundos o más.
Sólo cuando
11/8 10:15 PM
aparece la
π
Espacio
2:34 EP
∫Cassette de vídeo
≥Haga disparar la lengüeta del
π
00:05.14
visualización de
cassette de vídeo para evitar un
estado (l derecha).
borrado accidental. Cubra el
Lengüeta
Cuando inserte una cinta demarra el contador de tiempo de la cinta
que queda. Según el tipo de cinta, esto puede emplear más o
menos 30 segundos.
orificio con una doble capa de
cinta adhesiva para cuando quiere usar el cassette de vídeo para
una nueva grabación.
≥Puede usar los cassettes de vídeo con las marcas VHS y S-VHS,
pero esta unidad no permite disfrutar plenamente las
características de los cassette de vídeo S-VHS.
≥Dé un golpecito en [1, PLAY] para volver a iniciar la normal
reproducción.
Reproducción de un cassette de vídeo
Operaciones preliminares
∫Búsqueda Jet
≥Seleccione el canal que ve la imgen de la unidad (por ejemplo la
entrada AV) en el televisor.
≥Pulse [VHS].
Durante la reproducción
Dé un ligero golpe en [6] (atrás)/[5] (en avance) dos veces.
Puede aumentar la localización progresiva/velocidad de
búsqueda en rebobinado.
≥Pulse [1, PLAY] para volver a iniciar la normal reproducción.
≥Puede seleccionar la velocidad de búsqueda para ver la imagen
grabada.
[1] Pulse [Í, DVD/VHS POWER] para encender la
unidad.
[2] Inserte un cassette de vídeo grabado. (l arriba)
[3] Pulse [1, PLAY].
≥La imagen grabada en el modo EP o VP puede resultar
distorsionada si se reproduce a una velocidad aproximada de
35 veces. Puede ocurrir un desplazamiento vertical. Esto no es un
funcionamiento defectuoso pero si tiene lugar, cambie a una
velocidad aproximada de 27 veces.
≥La reproducción inicia automáticamente si inserta un cassette
de vídeo al que se ha quitado su lengüeta.
Para interrumpir provisionalmente la reproducción
Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la
reproducción.)
≥La imagen podría ser incolora o podría resultar distorsionada
según el televisor.
Para detener la reproducción
Pulse [∫, STOP].
∫Lento
Durante la reproducción
Pulse y mantenga [;, PAUSE] durante 2 segundos o más.
≥Pulse [1, PLAY] para volver a iniciar la normal reproducción.
Nota
≥Cuando está apagada la unidad, un cassette de vídeo insertado
puede ser reproducido pulsando [1, PLAY].
≥Cuando la cinta llega al fin, esta unidad la rebobina
automáticamente hasta el comienzo. Esta función no obra durante
la grabación temporizada, el avance rápido y la grabación con
parada especificada.
≥La búsqueda Jet, la localización progresiva, el rebobinado o la
reproducción lenta se quitan automáticamente a los 10 minutos, y
para la pausa se quitan a los 5 minutos.
≥Cuando ve una imagen fija o una reproducción lenta, la imagen
que aparece en el modo VP puede resultar distorsionada.
≥Cuando reproduce una cinta que fue grabada en otro VCR, puede
ser necesario ajustar la pista. En algunos casos, la calidad de la
imagen podría resultar todavía inferior. Esto se debe al formato
limitado.
≥Cuando la unidad inicia a hacer una grabación temporizada en el
DVD mientras se reproduce un VHS, puede haber unas
distorsiones en las imágenes.
∫Rebobinado Jet
Para ejecutar un rebobinado a una velocidad más rápida
Pulse [6JET REW].
La indicación “J. REW” aparece en la pantalla del televisor.
≥Según la cinta o la condición de funcionamiento, la velocidad de
rebobinado puede variar un poco.
≥El contador de la cinta se repone a “00:00.00” cuando la cinta se
rebobina desde el comienzo.
≥Según la cinta, esta función podría no obrar.
∫Cuasi reproducción S-VHS (SQPB)
Es también posible reproducir cintas grabadas en el sistema S-VHS.
≥Pueden tener lugar algunos ruidos según el tipo de cinta utilizada.
≥No es posible conseguir plenamente una resolución más alta que
la que es capaz el S-VHS.
≥No es posible grabar en el sistema S-VHS con esta unidad.
∫Reproducción repetida
≥Cuando un televisor está conectado en la salida DVD PRIORITY
de esta unidad y la unidad demarra grabando o empeza una
grabación temporizada en el DVD, no se pueden reproducir
imágenes de un VHS.
Durante la reproducción o mientras que está detenida
Mantenga pulsado [1, PLAY] durante 5 o
más segundos.
≥En el visualizador aparece la indicación
“RPt”.
≥Al fin del programa, la cinta se rebobina hasta el comienzo del
programa y lo va a reproducir otra vez (esto sólo funciona si
quedan al menos 5 segundos de espacio en blanco al fin del
programa). Esto se repite hasta que lo cancela.
∫Avance rápido/Rebobinado
Durante la parada
Pulse [6] (atrás)/[5] (en avance).
∫Localización progresiva/Rebobinado
Durante la reproducción
Dé un ligero golpe en o mantenga pulsado [6] (atrás)/[5]
(en avance).
Para reiniciar la reproducción normal
Pulse [1, PLAY].
≥Si mantiene pulsadas estas teclas, la normal reproducción vuelve a
iniciar soltándolas.
Para detener la reproducción
Pulse [∫, STOP].
77
VQT0R73
Grabación
VHS
Nota
≥Aunque el cassette que usa tenga la etiqueta “S-VHS”, no es
posible grabar en el sistema S-VHS con esta unidad. Ésta se
graba en el normal sistema VHS.
DVD/VHS POWER
TV
POWER
Í
VOLUME
CH
INPUT SELECT TV/VIDEO
≥No puede cambiar canales mientras graba. Puede cambiar
canales mientras está en el modo de pausa.
≥Cuando la grabación está en pausa durante más de 5 minutos, la
unidad vuelve al modo de parada.
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
VHS
Teclas
numéricas
CH, W, X
∫Para visualizar el tiempo aproximado que queda en la
cinta
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
[1] Seleccione “SELECCIONAR CINTA” desde el menú VHS y elija
SLOW/
SKIP/INDEX
REW SEARCH FF
la longitud correspondiente de la cinta.
[2] Pulse varias veces [STATUS].
PLAY
∫
El visualizador cambia tan pronto como se pulsa cada vez
[STATUS].
Canal de entrada ) Tiempo que queda en la cinta ) Contador
^---------------------------------------------------------------------------------------------------------}
≥El tiempo que queda en la cinta podría no visualizarse
correctamente según la cinta usada.
;
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
S
∫Indicación del tiempo en que se parará la grabación
Durante la grabación
Pulse [¥, REC] para seleccionar el tiempo de grabación.
≥Se puede también pulsar [¥, REC] en la unidad principal.
Visualización de la unidad
SCHEDULE
DISPLAY
STATUS
JET REW
SCHEDULE
STATUS
REC
REC MODE DVD ERASE ADD/DLT
CREATE
µ
REC MODE
COPYING
VCR/TV
CHAPTER
VHS
DVD
Cada vez que pulsa la tecla:
Contador (suprimir) # OFF 0:30 # OFF 1:00 # OFF 1:30
^------ OFF 4:00 ! OFF 3:00 ! OFF 2:00 !----------}
Grabación de programas televisivos
Operaciones preliminares
≥Seleccione el canal que ve la imgen de la unidad (por ejemplo la
entrada AV) en el televisor.
≥Controle que el reloj esté ajustado a la hora correcta. Por si no lo
estuviese, ajústelo.
Referencia
≥Esto no funciona durante las grabaciones temporizadas.
≥Pulsando [∫, STOP] la grabación se detiene y el horario
configurado se borra.
≥Pulse [VHS].
∫Recepción de las transmisiones televisivas durante la
grabación (l 74)
[1] Inserte un cassette de vídeo que tenga la
lengüeta de protección contra el borrado
accidental intacta. (l 77)
[2] Pulse [CH, W, X] para seleccionar un canal TV.
Para seleccionar los canales con las teclas numéricas:
Modo Antena (Ondas hertzianas)
Grabación temporizada
Puede introducir hasta 16 programas con un adelanto de un mes.
Operaciones preliminares
≥Seleccione el canal que ve la imgen de la unidad (por ejemplo la
entrada AV) en el televisor.
≥Controle que el reloj esté ajustado a la hora correcta. Por si no lo
estuviese, ajústelo.
≥Inserte un cassette de vídeo que tenga la lengüeta de protección
contra el borrado accidental intacta. (l 77)
≥Pulse [VHS].
por ej.,
“5”: [0] )[5]
“15”: [1] )[5]
Modo Cable TV (Cable)
por ej.,
“5”: [0] )[0] )[5] “15”: [0] )[1] )[5]
“115”: [1] )[1] )[5]
[3] Pulse [REC MODE] para seleccionar el modo de
grabación.
Cada vez que pulsa la tecla: SP>EP>VP>SP
[4] Pulse [¥, REC] para iniciar la grabación.
∫ Uso del sistema VCR Plus+
Se refiera a “Uso del sistema VCR Plus+”, paso 1–6. (l 76)
Para detener temporalmente la grabación
Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la
grabación.)
Para detener la grabación
Pulse [∫, STOP].
Modos de grabación
SP: Puede grabar la longitud señalada en la cinta.
EP: Tres veces la longitud del modo SP.
VP: Cinco veces la longitud del modo SP.
≥Para conseguir una capacidad de grabación más larga,
seleccione “EP” o “VP”.
≥Si la calidad de la imagen es importante para Ud. o bien si quiere
almacenar la cinta durante un largo período, seleccione “SP”.
≥Esta unidad puede reproducir cintas grabadas con el modo LP en
otro equipo.
Modo VP:
≥Una cinta grabada en el modo VP por esta unidad no puede
distingue de otra cinta indicando “VP” en su etiqueta, etc.
≥Lleva más tiempo para que funcione la pista automática cuando
se reproducen cintas en el modo VP y, en algunas cintas, podría
no funcionar de ninguna manera. Si fuese el caso, haga la
localización manualmente.
78
VQT0R73
Grabación
VHS
∫Modo SP/EP automático
∫ Programación manual
Si al comienzo de la grabación temporizada, no queda cinta
bastante para terminarla, la función SP/EP hará marchar
automáticamente la cinta al modo EP para la grabación. Esto
garantiza que será grabado el entero programa. Si el modo EP no es
bastante para alargar la cinta para que se adapte al entero
programa, no será posible grabar el entero programa TV.
≥Cuando se conecte una caja TV de cable o un receptor de satélite,
seleccione el canal en la caja TV de cable o receptor de satélite
antes de que comience la grabación temporizada.
[1] Pulse [SCHEDULE].
≥Cerciórese de que esté seleccionado “Nueva grabación
programada”.
Programación
temporizada
Primer programa
(30 min.)
Segundo programa (60 min.)
[2] Pulse [ENTER], luego desplace y cambie los
detalles usando [3, 4, 2, 1].
≥Pueden usarse las teclas numéricas para introducir “Canal”,
“Fecha”, “Act.” y “Des.”.
Cinta de vídeo
45 min.
en EP
15 min.
en SP
30 min. en SP
≥Canal (Posición del programa/Nombre de la estación de TV)
≥Fecha
≥No es posible activar automáticamente el modo VP.
≥La longitud de la cinta ha de ser ajustada correctamente.
≥Algunas cintas podrían no funcionar correctamente.
≥Si cambia el modo de grabación de SP a EP durante la grabación
temporizada, en aquel punto podría tener lugar una breve
distorsión de la imagen.
Puede crear usted un programa diario o semanal.
≥Act. (hora de encendido)/Des. (hora final)
Si mantiene pulsado el botón, el tiempo aumentará o
disminuirá en incrementos de 30 minutos.
≥Unid. (Unidad de grabación)
Seleccione la unidad de grabación “VHS”.
≥Modo (Modo de grabación)
Para cambiar el modo de grabación, puede pulsar también
[REC MODE].
SP,.EP,.VP,.AUTO°,.SP... (l 78)
° Modo SP/EP automático (l derecha)
≥Nombre tít.
∫ Controle, cambie o borre el programa
Se refiera a “Controle, cambie o borre el programa”, paso 1–5.
(l 76)
∫Precauciones al usar la grabación temporizada en DVD
y VHS (l 76)
No puede ser usado.
[3] Al terminar las correcciones pulse [ENTER].
≥Para continuar programando:
Seleccione “Nueva grabación programada” y repita los pasos
2–3.
[4] Pulse [SCHEDULE].
[5] Pulse [Í, DVD/VHS POWER].
≥La grabación temporizada sólo puede ser iniciada cuando la
unidad está apagada.
≥La unidad se apaga y en el visualizador de la unidad se
enciende “ ” para señalar que la espera de la grabación
temporizada ha sido activada.
∫Para hacer salir la unidad de la espera de la grabación
temporizada
Pulse [Í, DVD/VHS POWER].
≥Tenga cuidado de pulsar [Í, DVD/VHS POWER] para que la
unidad vuelva al modo de espera antes de la hora de la grabación
temporizada. La grabación temporizada sólo funcionará si está
visualizado “ ”.
∫Para detener la grabación mientras un programa está
trabajando
[1] Pulse [VHS].
[2] Pulse [∫, STOP], luego [ENTER] dentro de 5 segundos.
≥Puede también mantener pulsado [∫] en el DVD de la unidad
principal durante 3 o más segundos para detener la grabación.
Nota
≥“ ” destellan cuando la unidad no puede ejecutar la grabación
temporizada (por ejemplo, el cassette de vídeo no tiene la lengüeta
de protección contra el borrado accidental o bien no hay ningún
cassette de vídeo en su respectivo compartimiento).
≥El tiempo real grabado podría alargarse más allá del programa
mismo cuando los programas TV se graban usando el sistema
VCR Plus_.
≥Si ajusta “HL” (Tiempo de ahorro de la luz del día) a “Act” cuando
ajusta manualmente el reloj, la grabación temporizada podría no
funcionar cuando del verano cambia al invierno y viceversa.
79
VQT0R73
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
“DTS” and “DTS 2.0iDigital Out” are trademarks of Digital
Theater Systems, Inc.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and
4,819,098, licensed for limited viewing uses only.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
VQT0R73-1
C 2005 Matsushita Electric Industrial Co., Ltd.
F0905Fa0
|