a
User Guide
Section 750
Key Phone
User Guide
Supports ICX and S-ICX Version 5.0
ICX (International) Version 5.0
Issued October 2000
The contents of this manual are subject to change without notice and do not constitute
a commitment on the part of Matsushita Communication Industrial Co. Ltd (MCI).
Every effort has been made to ensure the accuracy of this document. However, due to
ongoing product improvements and revisions, Panasonic cannot guarantee the accura-
cy of printed material after the date of publication, nor can it accept responsibility for
errors or omissions. Panasonic will update and revise this document as needed.
The software and hardware described in this document may be used or copied only in
accordance with the terms of the license pertaining to the said software or hardware.
Reproduction, publication, or duplication of this manual, or any part thereof, in any
manner, mechanically, electronically, or photographically, is prohibited without per-
mission of the Matsushita Communication Industrial Co. Ltd (MCI).
©Copyright 2000 by Matsushita Communication Industrial Co. Ltd (MCI)
All rights reserved.
PREFACE
The Key Telephone User Guide is for anyone who uses a Panasonic digital telephone
in conjunction with the Panasonic ICX and S-ICX. The ICX and S-ICX are a
telephone system that provides you with a powerful set of features for handling
calls.
This manual provides an overview of the following digital phones and offers
detailed information about using the features provided by the ICX and S-ICX:
U.K.
Hong Kong/Other
• 12 key-Standard
VB-D411UK
VB-44220TX
VB-44221HK
• 12 key-Speakerphone
• 12 key-Display Speakerphone
• 12 key-Large Display Speakerphone
VB-D411DSUK
VB-D411LDSUK
VB-44223TX/HK
VB-44225TX/HK
• 12 key-Soft key Display Speakerphone VB-D411DSVUK VB-44224HK/TX
• 24 key-Display
VB-D611DUK
VB-D611DSUK
VB-D331UK
VB-D631UK
• 24 key-Display Speakerphone
• EM24-24 key Expansion Module
• DSS-72 key DSS/BLF
VB-44233TX/HK
VB-44310HK
VB-44320HK
HOW TO USE THIS MANUAL
We recommend that you read the entire manual before using your digital phone, in
order to get a clear idea of its capabilities.
WHAT THIS MANUAL CONTAINS
This manual contains the following chapters:
•
Chapter 1, “Understanding Your Phone” - Describes features of Panasonic
digital telephones.
•
Chapter 2, “Setting Up Your Phone” - Provides procedures for setting up
telephone features such as Flexible Function (FF) keys.
ICX-50-750
ICX (International), issued October 2000
7
Notation Used
•
•
•
•
•
•
Chapter 3, “Placing Outside Calls” - Provides procedures for making outside
calls.
Chapter 4, “Handling Incoming Calls” - Provides several procedures for
answering calls.
Chapter 5, “Communicating Within Your Office” - Provides procedures for
handling internal calls.
Chapter 6, “Using Additional Features” - Provides procedures for using
additional features.
Appendix A, “Dial Code List.” - Provides a list of dial codes used for
programming FF keys.
Appendix B, “Customized PSD Bin Numbers.” - Provides a table for
documenting or tracking your personalized list of speed dial numbers.
NOTATION USED
This user guide uses the following conventions:
•
References to chapters and sections are enclosed in quotation marks and
include the title and page number. For example: “Setting Up Flexible Function
Keys” on page 22.
•
•
References to information you are to enter or dial are printed in boldface,
mixed-case characters. For example: Enter 73*.
References to the telephone keypad are printed in bold, upper case characters.
For example: Press the HOLD key.
FOR MORE INFORMATION
For more information about features available with the Panasonic ICX and S-ICX
systems and digital phones, contact your system administrator or ICX and S-ICX
dealer, or refer to the Panasonic publication Section 700: Feature Operation.
8
ICX (International), issued October 2000
ICX-50-750
1. UNDERSTANDING YOUR PHONE
The following information in this chapter will familiarize you with your Panasonic
digital phone and enable you to effectively use its call-handling features:
•
•
•
•
•
•
Non-Display Phones (page 9)
Small-Display Phones (page 11)
Large-Display Phones (page 15)
Using Variable Mode (page 14)
Changing the Default Display (pages 13 and 17)
Understanding Display Information (pages 13 and 18).
NON-DISPLAY PHONES
Non-display phones do not have a Liquid Crystal Display (LCD). Table 1 on page
10 describes the features (1-18 below) that are typical of non-display phones.
Figure 1. Non-display phone
ICX-50-750
ICX (International), issued October 2000
9
1. Understanding Your Phone
Table 1. Non-display phone features
#
Feature
Message Waiting Indicator
PROG Key
Description
1
Indicates that you have a message.
Used to program Flexible Function (FF) and one-
touch keys, to adjust ringer volume, and to send a
flash signal. Depending on the setup of your sys-
tem, may also be used to transfer calls.
2
CONF Key
Used to establish conference calls and to check FF
key and one-touch features.
3
4
5
6
7
One-Touch Keys
Used to make outside calls or to access system fea-
tures.
Flexible Function (FF)
Keys
Used to access outside lines or to access system fea-
tures.
DND/CF Indicator
Indicates that Do-Not-Disturb (DND) or Call For-
warding is set.
MIC Indicator
Indicates that your voice is not muted (i.e., party on
the other end can hear you). Goes off when your
hands-free microphone is muted and flashes when
your handset is muted.
INT Indicator
Lights when you are on a call and flashes when you
hold a call.
8
9
ON/OFF Indicator
FL/R Key
Lights when the ON/OFF key has been pressed.
Used to end an outside call and to either restore out-
side dial tone or switch to external dial tone status
without hanging up the receiver.
10
11
12
REDIAL Key
Used to redial the last number dialled.
MEMORY Key
Used to access speed dialling or enter account
codes.
ON/OFF Key
Used to make a call without lifting the handset or to
turn the speaker on and off.
13
14
15
LINE Key
Used to seize a free outside line.
VOLUME Key
Used to adjust the level of tones, background
music, ringing, receiver volume, and display con-
trast.
HOLD Key
Microphone
Speaker
Used to hold calls, to retrieve held calls, and to
complete FF key programming.
16
Used to talk to another party without using the
handset.
17
18
Outputs tones and voice at your extension.
10
ICX (International), issued October 2000
ICX-50-750
1. Understanding Your Phone
SMALL-DISPLAY PHONES
Small-display phones have a display containing two lines of text. Table 2 on page 11
describes the features (1-22 below) that are typical of small-display phones.
Figure 2. Small-display phone
Table 2. Small-display phone features
#
Feature
Message Waiting Indicator
Display
Description
1
Indicates that you have a message.
Displays information about the phone’s status,
menus, and dialling directories.
2
3
4
MODE Key
END Key
Used to change display modes from Default Mode
to Speed Dial Mode or Extension Directory Mode.
Used to exit Directory Mode and return the display
to Default Mode.
ICX-50-750
ICX (International), issued October 2000
11
1. Understanding Your Phone
#
Feature
Soft Keys
Description
5
Used to select speed dial directories or numbers.
PROG Key
Used to program Flexible Function (FF) and one-
touch keys, to adjust ringer volume, and to send a
flash signal. Depending on the setup of your sys-
tem, may also be used to transfer calls.
6
CONF Key
Used to establish conference calls and to check FF
key and one-touch features.
7
8
One-Touch Keys
Used to make outside calls or to access system fea-
tures.
Flexible Function (FF)
Keys
Used to access outside lines or to access system fea-
tures.
9
DND/CF Indicator
Indicates that Do-Not-Disturb (DND) or Call For-
warding is set.
10
11
12
INT Indicator
Lights when you are on a call and flashes when you
hold a call.
MIC Indicator
Indicates that your voice is not muted (i.e., party on
the other end can hear you). Goes off when your
hands-free microphone is muted and flashes when
your handset is muted.
13
14
ON/OFF Indicator
FL/R Key
Lights when the ON/OFF key has been pressed.
Used to end an outside call and to either restore out-
side dial tone or switch to external dial tone status
without hanging up the receiver.
15
16
REDIAL Key
Used to redial the last number dialled.
MEMORY Key
Used to access speed dialling or enter account
codes.
ON/OFF Key
Used to make a call without lifting the handset or to
turn the speaker on and off.
17
18
LINE Key
Used to seize a free outside line.
VOLUME Key
Used to adjust the level of tones, background
music, ringing, receiver volume, and display con-
trast.
19
20
HOLD Key
Microphone
Speaker
Used to hold calls, to retrieve held calls, and to
complete FF key programming.
Used to talk to another party without using the
handset.
21
22
Outputs tones and voice at your extension.
12
ICX (International), issued October 2000
ICX-50-750
1. Understanding Your Phone
Changing the Default Display
The MODE key enables you to change the software mode of the display from
Default Mode (i.e., time and date) to Directory Mode (i.e., System Speed Dial
[SSD], Personal Speed Dial [PSD], or Extension directories). The END key enables
you to return the display to Default Mode.
While in Directory Mode, the soft keys enable you to view either the SSD, PSD, or
Extension directories. After selecting the desired directory, the soft keys also enable
you to either view or dial speed dial or extension numbers. (For more information on
using directories to make calls, see “Dialling Speed Dial Numbers” on page 52 and
“Calling Other Extensions” on page 65.)
While in Variable Mode, you can also use the soft keys to access various system
features.
Notes:
•
You must be in Directory Mode to view speed dial and extension directories or
dial speed dial numbers using the soft keys.
•
The system features displayed in Variable Mode require system programming.
To display the Directory Mode on a small-display phone
1. (A)Press the MODE key one time to access the speed dial directories. (SSD
and PSD appear on the second line of the display.)
OR
(B) Press the MODE key twice to access the Extension Directory. (EXT appears
on the second line of the display.)
2. Press the END key to return to Default Mode.
Understanding Display Information
Display information indicates the status of the phone. However, this information
will vary depending on how the phone is programmed and its status. Several of the
more common displays are illustrated below.
Figure 3. Idle condition for small-display phone (display default)
17 MAR Wed 10:34
Extension
113
Brandy
User name
ICX-50-750
ICX (International), issued October 2000
13
1. Understanding Your Phone
Figure 4. Messages received for small-display phone
17 MAR Wed 10:34
Number of
messages
Person that
left the first
message
MSG
Carter
Figure 5. Reminder alarm for small-display phone
17 MAR Wed 10:34
Alarm
indicator
Alarm time
Alarm 12:30PM
Figure 6. Incoming outside call for small-display phone
Incoming outside
call
Outside line
number
#03
INCM CO
113
Brandy
Figure 7. Outside call in progress for small-display phone
Call
duration
Outside call
in progress
On Line
113
0’15
Brandy
Figure 8. Internal calling in use for small-display phone
Called
party
Intercom call
Talk
113
Greg
Brandy
Using Variable Mode
Using Variable Mode allows you to use the soft keys to access programmed system
features when your phone is in the following states:
•
•
•
•
During an intercom call
During a trunk dial tone
During a trunk call
After dialling a busy extension.
To activate Variable Mode on a small-display phone
1. Lift the handset or press the ON/OFF key.
14
ICX (International), issued October 2000
ICX-50-750
1. Understanding Your Phone
2. Press the Variable Mode Key.
3. Replace the handset or press the ON/OFF key.
To use Variable Mode on a small-display phone
1. After turning Variable Mode on, the display will reflect the programmed features
during an intercom call, trunk dial tone, trunk call, or after dialling a busy
extension.
2. Press the > or < key next to the desired feature.
LARGE-DISPLAY PHONES
Large-display phones are distinguished by their large displays. Table 3 on page 16
describes the features (1-23 below) that are typical of large-display phones.
Figure 9. Large-display phone
ICX-50-750
ICX (International), issued October 2000
15
1. Understanding Your Phone
Table 3. Large-display phone features
#
Feature
Message Waiting Indicator
Display
Description
1
Indicates that you have a message.
Displays information about the phone’s status,
menus, and dialling directories.
2
Soft Keys
Used to select menus, directories, speed dial num-
bers, and to access call-handling features.
3
4
PROG Key
Used to program FF and one-touch keys, to adjust
ringer volume and to send a flash signal. Depending
on the setup of your system, may also be used to
transfer calls.
CONF Key
MIC Key
Used to establish conference calls and to check
Flexible Function (FF) and one-touch key settings.
5
6
Used to activate/deactivate the Microphone/Mute
function. When activated, the party on the other end
can hear you. (See item 13, MIC Indicator.)
MENU Key
Used to return to the default Main Menu screen
which contains the following items:
7
• Personal Dial
• System Dial
• Extension
• Function System
• Function Ext
8
9
PREV Key
NEXT Key
Used to return to the previous screen.
Used to advance to the next screen.
Flexible Function (FF)
Keys
Used to access outside lines or to access system fea-
tures.
10
11
12
13
DND/CF Indicator
Indicates that Do-Not-Disturb (DND) or Call For-
warding is set.
INT Indicator
Lights when you are on a call and flashes when you
hold a call.
MIC Indicator
Indicates that your voice is not muted (i.e., party on
the other end can hear you). Goes off when your
hands-free microphone is muted and flashes when
your handset is muted.
14
ON/OFF Indicator
FL/R Key
Lights when the ON/OFF key has been pressed.
Used to end an outside call and to either restore out-
side dial tone or switch to external dial tone status
without hanging up the receiver.
15
16
REDIAL Key
Used to redial the last number dialled.
16
ICX (International), issued October 2000
ICX-50-750
1. Understanding Your Phone
#
Feature
Description
17
MEMORY Key
Used to access speed dialling or enter account
codes.
ON/OFF Key
Used to make a call without lifting the handset or to
turn the speaker on and off.
18
19
20
LINE Key
Used to seize a free outside line.
VOLUME Key
Used to adjust level of tones, background music,
ringing, receiver volume, and display contrast.
HOLD Key
Microphone
Speaker
Used to hold calls, to retrieve held calls, and to
complete FF key programming.
21
Used to talk to another party without using the
handset.
22
23
Outputs tones and voice at your extension.
Changing the Default Display
The ten soft keys located alongside the display on a large-display phone allow you
to change the software mode of the display. Instead of displaying the Main Menu
(Default Mode) for instance, you can set your phone to display one of the following
directories or menus:
•
Personal Dial - Allows you to program, view, or dial PSD numbers using the
soft keys.
•
•
•
System Dial - Allows you to view or dial SSD numbers using the soft keys.
Extension - Allows you to view or dial other extensions using the soft keys.
Function System - Allows you to access most key telephone features, such as
Call Forwarding, Do-Not-Disturb (DND), Microphone Mute, Background
Music, Call Pickup, Account Codes, etc.
•
Function Extension - Allows you to assign frequently used phone features for
easy access. Most items found under the Function System Menu can be
assigned to the Function Extension Menu in any order you desire.
To display a directory or menu on a large-display phone
1. Press the soft key to the left of the desired directory or menu. (The selected
directory or menu of feature displays.)
2. Press the MENU key to return to the Main Menu.
Note: Menus are programmable or customizable per extension. Therefore, the
actual menu that displays depends on your system configuration.
ICX-50-750
ICX (International), issued October 2000
17
1. Understanding Your Phone
Understanding Display Information
Display information indicates the status of the phone. However, this information
will vary depending on how the phone is programmed and its status. Several of the
more common displays are illustrated below.
Figure 10. Idle condition for large-display phone (display default)
17 MAR Wed 10:34
Extension
User name
Brandy
113
PERSONAL DIAL
SYSTEM DIAL
EXTENSION
FUNCTION SYSTEM
FUNCTION EXT
Figure 11. Messages received for large-display phone
17 MAR Wed
MSG
10:34
Carter
Number of
messages
Person that
left the first
message
PERSONAL DIAL
SYSTEM DIAL
EXTENSION
FUNCTION SYSTEM
FUNCTION EXT
Figure 12. Reminder alarm for large-display phone
17 MAR Wed
Alarm 12:30PM
10:34
Alarm
indicator
Alarm time
PERSONAL DIAL
SYSTEM DIAL
EXTENSION
FUNCTION SYSTEM
FUNCTION EXT
18
ICX (International), issued October 2000
ICX-50-750
1. Understanding Your Phone
Figure 13. Incoming outside call for large-display phone
Incoming outside
call
Outside line
number
#03
INCM CO
113
Brandy
PERSONAL DIAL
SYSTEM DIAL
EXTENSION
FUNCTION SYSTEM
FUNCTION EXT
Figure 14. Outside call in progress for large-display phone
Call
duration
Outside call
in progress
On Line
113
0’15
Brandy
PERSONAL DIAL
SYSTEM DIAL
EXTENSION
FUNCTION SYSTEM
FUNCTION EXT
Figure 15. Intercom calling in use for large-display phone
Called
party
Intercom call
Talk
113
Greg
Brandy
PERSONAL DIAL
SYSTEM DIAL
EXTENSION
FUNCTION SYSTEM
FUNCTION EXT
ICX-50-750
ICX (International), issued October 2000
19
1. Understanding Your Phone
This page intentionally left blank.
20
ICX (International), issued October 2000
ICX-50-750
2. SETTING UP YOUR PHONE
You can use the procedures in this chapter to customize your phone for the
following:
•
•
•
•
•
•
•
•
Adjusting Volume and Display Settings (page 21)
Setting Up Flexible Function Keys (page 22)
Setting Up One-touch Keys (page 23)
Setting Up Speed Dialling (page 25)
Assigning and Deleting Personal Speed Dial (PSD) Numbers (page 25)
Linking System Speed Dial Numbers (page 28)
Assigning and Deleting Names for PSD Numbers (page 29).
Setting User maintenance Functions (page 33)
ADJUSTING VOLUME AND DISPLAY SETTINGS
You can adjust the volume or display of the following by pressing the
VOLUME key:
•
•
•
•
Intercom and incoming ringer
Handset
Speaker
Display contrast of your phone.
To adjust the volume of your phone while it is in use
1. Press the VOLUME key:
a. During ringing to adjust the intercom or incoming ring tone.
b. During a call to adjust the handset or speaker volume.
To adjust the ringer volume of your phone while it is idle
1. Press the ON/OFF key.
2. Press the PROG key.
3. Enter 9, then 1 to adjust the incoming ring tone. (The phone produces a tone.)
ICX-50-750
ICX (International), issued October 2000
21
2. Setting Up Your Phone
OR
Enter 9, then 2 to adjust the intercom ring tone. (The phone produces a tone.)
5. Press the ON/OFF key.
To adjust the display contrast of your phone
Note: This task requires a display phone.
1. While the phone is idle, press the # key.
2. Press the VOLUME key several times as needed.
SETTING UP FLEXIBLE FUNCTION KEYS
You can set up Flexible Function (FF) keys to initiate system features or to assign
specific extension numbers.
Note: You cannot set up FF keys that are dedicated to outside lines. Contact your
system administrator or ICX and ICXHD dealer to make changes to dedicated FF
keys.
To set up FF keys
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the FF key to be programmed.
4. Do one of the following:
If . . .
Then . . .
a. For a fixed dial code, press the REDIAL
key. For a flexible dial code, proceed to
step b.
You want one-key assess to a certain fea-
ture:
Notes:
b. Enter one of the dial codes listed in
Appendix A, “Dial Code List” on page
95.
• You must enter a dial code when
assigning features. (See Appendix A,
“Dial Code List” on page 95.)
• Not all dial codes can be stored in FF
keys
**You want one-key access to a specific
extension number, plus the ability to pick
up the extension’s calls and know when the
extension is busy:
Enter the extension number.
22
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
If . . .
Then . . .
**If you assign an extension number to an FF key, the FF key will light red when the exten-
sion is busy. It will light green when Do-Not-Disturb (DND) or Call Forwarding is set. In
addition, you can pick up a call that is ringing or on hold at the extension by simply pressing
the FF key when it is flashing.
5. Press the HOLD key.
6. Repeat steps 2-5 to program additional keys.
7. Replace the handset or press the ON/OFF key.
To clear an FF key’s programming
1. Pick up the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the desired FF key.
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
To check the FF key’s setup
Note: This task requires a display phone.
1. Pick up the handset or press the ON/OFF key.
2. Press the CONF key.
3. Press the FF key. The assigned function appears on the display.
4. Replace the handset or press the ON/OFF key.
SETTING UP ONE-TOUCH KEYS
You can set up one-touch keys on a non-display or small-display phone to store
phone numbers, speed dial numbers, or feature access codes.
To program a one-touch key for an outside phone number
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
ICX-50-750
ICX (International), issued October 2000
23
2. Setting Up Your Phone
4. Dial the phone number to be stored.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
To assign an SSD number to a one-touch key
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. Press the MEMORY key.
5. Enter the SSD bin number to be programmed.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
To assign a feature code or extension number to a one-touch
Note: **When the system is set up for MCO Code level, one-touch keys
automatically dial an outside line. (MCO Code level requires system programming.)
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. **If the feature functions at the MCO Code level, press MEMORY * #.
5. Enter the desired feature code or extension number.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
To check a programmed one-touch key
Note: This task requires a display phone.
1. Pickup the handset or press the ON/OFF key.
2. Press the CONF key.
24
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
3. Press the one-touch key to be checked. (Programmed data appears on the
display.)
4. Replace the handset or press the ON/OFF key.
SETTING UP SPEED DIALLING
You can set up the following speed dial features using your phone’s one-touch or
soft keys:
•
•
•
Speed dial numbers
Speed dial linking
Speed dial names
Assigning and Deleting PSD Numbers
You can assign frequently called numbers (or System Speed Dial [SSD] numbers) to
your phone’s one-touch or soft keys. These keys are preprogrammed to correspond
to specific PSD codes or bins. You store your PSD numbers in these bins. When you
press a one-touch or soft key containing a PSD number, the PSD bin associated with
that key is accessed and the speed dial number is dialled.
You can assign up to 10 PSD numbers to the one-touch keys on a non-display or
small-display phone (PSD bins 80-89) and up to 20 PSD numbers to the soft keys on
a large-display phone (PSD bins 80-99).
When in the PSD Directory Mode, you can view the PSD bin numbers on the
display. On a small-display phone, two bins are displayed at a time. To display the
next two bins, press the # key. To display the previous two bins, press the * key. On
a large-display phone, 10 PSD bins are displayed at a time. To display the next 10
bins, press the NEXT key. To display the previous 10 bins, press the PREV key.
For a list of corresponding PSD bin numbers and one-touch or soft keys, see Figure
16 and Table 4 on page 26.
Notes:
•
•
On a small-display phone, you must be in the PSD Directory Mode to assign,
access, or view numbers in PSD bins 90-99. On a non-display phone, you
access or assign numbers to PSD bins 90-99 by pressing the MEMORY key
and entering the PSD bin number. (To review the PSD numbers on non-
display phones, refer to your customized list of PSD numbers in Appendix B
“Customized PSD Bin Numbers” on page 101.)
Until you assign a name or string of characters to a PSD number, the PSD bin
number will display when you press the one-touch or soft key. For more
information, see “Assigning and Deleting Names for PSD Numbers” on page
29.
ICX-50-750
ICX (International), issued October 2000
25
2. Setting Up Your Phone
•
You can check PSD numbers or names that have been assigned to one-touch
or soft keys. For more information, see “Checking Speed Dial Numbers” on
page 54.
Figure 16. One-touch and soft key numbering scheme
02:28 Thu NOV 14
Langford S 173
1
2
3
4
5
6
7
8
PROG
CONF
6
1
7
2
8
3
9
4
10
5
9
10
Small-display phone one-touch keys
Large-display phone soft keys
Table 4. Corresponding one-touch or soft keys and PSD bin numbers
One-touch or soft key
Corresponds to PSD bin on ...
Small-display and
Large-display phone
non-display phones
80
80 or 90
81 or 91
82 or 92
1
2
3
81
82
etc.
To assign a PSD number to a one-touch or soft key
Note: Before assigning PSD numbers, you must determine whether the system is
set up for Intercom Level (programmed to dial an inside line) or MCO Code level
(programmed to dial an outside line). Depending on the system set up, you must
include the appropriate dialling code as part of the PSD number. To determine which
code to use, see Table 5 on page 27.
1. Pick up the handset or press the ON/OFF key.
2. Either:
•
Press the PROG key and then press the MEMORY key.
26
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
OR
•
Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).
3. Enter the PSD bin number (80-99).
4. Enter the phone number you want to be speed-dialled (maximum length = 16
characters). Remember to include the Intercom Level or MCO Code level code
depending on how the system is set up. (Refer to the following table.)
Table 5. Characters allowed when assigning PSD numbers
To insert a . . .
Enter/Press...
0, 1-9, *, #
Digit or character
Intercom Level*
MEMORY * #
MEMORY * 0
MCO Code 9 (UK/HK), 0 (Taiwan, Malaysia, Indo-
nesia) **
MCO Code 81**
MEMORY * 71
MEMORY * 72
MEMORY * 73
MEMORY * 74
FL/R
MCO Code 82**
MCO Code 83**
MCO Code 84**
Pause
DP - DTMF Code
SSD Code
MEMORY * *
MEMORY NN(N)
PROG
Hyphen (-)
Display Number (Start / Stop) ***
DTMF Conversion After the Other Party Answers
MEMORY * 2
MEMORY * 3 (Version 3.5
and higher)
*
Indicates that the digits that follow are either a feature access code or extension
number. (Do not include if system is set for Intercom Level.)
** Indicates that the digits that follow are for an outside number. (Do not include if
system is set for Trunk Level.)
***Indicates that the enclosed digits should not be displayed during dialling. Must
precede and follow the digits that you do not want displayed. Example: MEM-
ORY *2 555-4143 MEMORY *2.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
ICX-50-750
ICX (International), issued October 2000
27
2. Setting Up Your Phone
To delete a PSD number assigned to a one-touch or soft key
Note: When deleting a PSD number from a non-display phone, be sure to record the
change in your personalized list of PSD numbers. (See Appendix B, “Customized
PSD Bin Numbers” on page 101.)
1. Pick up the handset or press the ON/OFF key.
2. Either:
•
Press the PROG key and then press the MEMORY key.
OR
•
Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).
3. Enter the PSD bin number (80-99).
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
Assigning SSD Numbers
Note: SSD numbers require system programming.
SSD numbers are numbers that are frequently called by many different individuals
at your location; such as a branch or corporate office, a package delivery service, or
a travel agent. SSD numbers must be programmed from the attendant’s phone. Once
programmed, they are available for everyone to use.
A maximum of 80 or 800 SSD numbers are allowed, depending on the system. In an
80 SSD number system, SSD numbers are stored in bins 00-79. In an 800 SSD
system, SSD numbers are stored in bins 000-799. You dial SSD numbers by entering
the appropriate bin number or by using one-touch or soft keys. For more
information, see “Dialling Speed Dial Numbers” on page 52.
Note: To dial an SSD number using the one-touch keys on a non-display or small-
display phone, you must first assign the SSD number to a PSD bin number. For more
information, see “Assigning and Deleting PSD Numbers” on page 25.
Linking System Speed Dial Numbers
To handle phone numbers longer than 25 characters, you can link up to six SSD
numbers in one PSD bin. You can then dial the entire number (each SSD number
contained in the chain) by pressing the programmed PSD key or by entering the
speed dial bin number.
28
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
Notes:
•
Before linking multiple SSD numbers to a PSD bin, the SSD bins must
already have been programmed with the appropriate speed dial information.
(This requires system programming.)
•
If numbers do not appear on the display (00-79 or 000-799) when you use
SSD codes, your extension is not programmed to display that data.
To link speed dial numbers to a PSD bin
1. Pick up the handset or press the ON/OFF key.
2. Either:
•
Press the PROG key and then press the MEMORY key.
OR
•
Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).
3. Press the soft or one-touch key (for the PSD bin [80-99]) to be programmed.
4. Press the MEMORY key.
5. Enter the SSD bin number that contains the first part of the number to be dialled.
(If a pause is required, press the REDIAL key.)
6. Repeat steps 4-5 (up to 5 more times) for each remaining SSD number to be
linked.
7. Press the HOLD key when you are finished.
8. Replace the handset or press the ON/OFF key.
To use a PSD key that links multiple speed dial numbers
1. If necessary, select the trunk group (9 [UK/HK], 0 [Tawain, Malaysia, Indonisia],
or 81-84) to access an outside line. (Normally the trunk is selected by the speed
dial numbers.)
2. Press the PSD key.
Assigning and Deleting Names for PSD Numbers
After assigning a PSD number to a one-touch or soft key, you can assign a name to
the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name
when you are in the PSD Directory mode.
ICX-50-750
ICX (International), issued October 2000
29
2. Setting Up Your Phone
Note: You need to know the PSD bin number for PSD number in order to assign a
name to it. To determine the bin number, see “Checking Speed Dial Numbers” on
page 54.
To assign a name to a PSD number
Note: This task requires a display phone.
1. Pick up the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 0 for the Name Assignment mode.
5. Press the VOLUME key until the desired PSD bin number (80-99) is displayed.
6. Press the FL/R key to clear the current/default data.
7. (A) For a small-display phone (see Figure 17 on page 31 for an example):
a. Press the appropriate one-touch key for the desired group of letters.
b. Use the bottom row of FF keys to define your selection.
c. Repeat steps a-b as many times as necessary to enter the desired name.
• Press the * key to erase an entry.
• Press the # key to enter a space.
(B) For a large-display phone (see Figure 18 on page 32 for an example):
a. Press the appropriate soft key next to the desired row of letters.
b. Use the bottom row of FF keys to define your selection.
c. Repeat steps a-b as many times as necessary to enter the desired name.
• Press the * key to erase an entry.
• Press the # key to enter a space.
8. Press the HOLD key when the name is complete.
9. To enter another speed dial name, repeat steps 5-8.
10. Hang up or press the ON/OFF key.
30
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
Figure 17. Name assignment example - small-display phone
To enter a D:
Press the first one-touch key from the left on the bottom row.
a
b
Press the fourth FF key from the left on the bottom row.
To enter an o:
Press the third one-touch key from the left on the top row.
c
d
Press the third FF key from the left on the bottom row.
a-f
g-l
m-r
m n o p q r
M-R
s-x
y-sp
y z : & / sp
Y- -
a b c d e f
A-F
g h i j k l
G-L
s t u v w x
S-X
A B C D E F
G H I J K L
M N O P Q R S T U V W X
Y Z . , ’ -
MOD E
END
A
B
C
m - r
M - R
c
D
E
F
PROG
a - f
g - l
s - x
S - X
y - sp
CONF
a
A - F
G - L
Y - -
d
b
ICX-50-750
ICX (International), issued October 2000
31
2. Setting Up Your Phone
Figure 18. Name assignment example - large-display phone
To enter a D:
Press the first soft key on the top left.
a
b
Press the fourth FF key from the left on the bottom row.
To enter an o:
Press the third soft key from the top right.
c
d
Press the third FF key from the left on the bottom row.
a
A BC D E F
G H IJ KL
a b c d e f
g h i j k l
3
M N O P Q R m n o p q r
S TUVW X
YZ. , ' -
s t u v w x
y z : & / sp
MS G
CONF
MENU
PREV
NEXT
PROG
d
b
To delete a name assigned to a PSD number
Notes:
•
This task requires a display phone.
32
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
•
You need to know the PSD bin number for the PSD number in order to delete
an assigned name. To check the bin number for a key, see “Checking Speed
Dial Numbers” on page 54.
1. Pick up the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 0 for the Name Assignment mode.
5. Press the VOLUME key until the desired PSD bin number (80-99) is displayed.
6. Press the FL/R key to clear the current/default data.
7. Press the HOLD key.
Notes:
•
It is strongly recommended that you assign the PSD bin number as a name for
the key at this point so that it will appear on the display for future use. The bin
number should be entered in the following format: “-PSDxx (or xxx)” where
xx or xxx = the actual bin number. Example: “-PSD901”. For more
information, see “Assigning and Deleting Names for PSD Numbers” on page
29.
•
If using a large-display phone, press the MENU key, then the key to the left
of PERSONAL DIAL to have the change reflected on the display.
SETTING USER MAINTENANCE FUNCTIONS
User Maintenance provides several items that can be adjusted by the end user of the
telephone system. The telephone system dealer is not required to make these
changes. These items include settings for:
•
•
•
•
•
•
•
•
Absence Messages
CID Logging Ext
Call Forward ID Code
Date and Time - including date, time, and day of week
Extension name
Message Key ID Code
Personal Speed Dial (PSD) Assignment - including PSD number and name
Send Text Messages
ICX-50-750
ICX (International), issued October 2000
33
2. Setting Up Your Phone
•
System mode. You can set the System to handle incoming calls, outbound call
routing, and built-in voice mail call messages differently depending upon
whether the system is in Day 1 mode, Day 2 mode, or Night mode. With User
Maintenance, you can program the System for mode schedule, mode schedule
for special day, mode schedule for exception days, and day of the month
patterns.
•
•
•
•
•
System Speed Dial (SSD) Assignment - including SSD number and name
Text Message Replies
TRF of CFID
Verified Account Code
Walking Toll Restriction Service (TRS) (Call Barring) Code
User Maintenance requires a Digital Display Key Telephone assigned to a Class of
Service (COS) that allows User Maintenance.
The procedures in the following sections describe the basic steps used for modifying
parameters. However, there are many alternative ways to view and modify the
parameters using special keys and procedures. Some of the more advanced keys
include:
REDIAL
FL/R
(At menu level) clears an entry
(At data entry) retrieves the last entry setting
(At menu level) ignored
(At data entry) clears setting
Begins programming log-in or exits
programming
(At menu level) moves to date and time
(At data entry) saves the displayed setting and
moves to the next setting
ON/OFF
HOLD
PROG
CONF
MEMORY
MENU
PREV
Moves to the 81 User Maintenance Menu
Moves to the first data setting
Backs out of the address menu levels
Ignored
(At menu level) moves to the previous screen
(At data entry) ignored
NEXT
(At menu level) moves to the next screen
(At data entry) ignored
Scrolls through the same address level
(ascending)
Scrolls through the same address level
(descending)
VOLUME (down)
VOLUME (up)
FF1
FF2
FF3
FF4
FF5
PSD Assignment menu
SSD Assignment menu
Extension Name menu
Verified ID Code menu
Call Forward ID Code menu
34
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
FF6
FF7
FF8
FF9
FF10
Message Key ID Code menu
System Mode menu
Walking /Station Lock TRS (Call Barring)
TRF of CWRD
CID Logging Ext.
Once in a data entry level, you must either enter an acceptable value or restore the
previous value before proceeding. For instance, if you change an entry to an
unacceptable value and then press FF1 to move to the PSD Assignment menu, you
will not be able to proceed. You must first enter an acceptable value.
To Enter User Maintenance Mode:
1. Press the ON/OFF key on a telephone with a COS that allows user login.
2. Press the PROG key.
3. Press the * key twice.
4. Press the CONF key.
Note: Your extension’s Class of Service must be properly set to allow User
Maintenance access. Also, only one user may enter User Maintenance or System
Programming at a time.
Absence Messages
To create Absence Messages using either a large-display
or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2. Enter: 12 and press HOLD HOLD.
3. Enter: Message Number (0-9).
4. Enter: Absence Message (up to 15 characters):
5. If using a large-display phone, press the soft key next to the desired row of
letters.
6. If using a small-display phone press the appropriate one-touch key.
Note: Press the FL/R key to clear any existing data.
ICX-50-750
ICX (International), issued October 2000
35
2. Setting Up Your Phone
7. Use the bottom row of FF keys to select a single letter.
Notes:
•
•
Press the * key to erase a single entry.
Press the # key to enter a space.
8. Repeat steps 4-5 as many times as necessary to enter the desired Absence
Message and press HOLD to store the entry.
Note: Press the FL/R key to clear any existing data.
9. To set additional Absence Messages, press the VOLUME up or down key or
press HOLD to move to the desired Send Text Message.
10. Repeat steps 4-7 until all Absence Messages are entered.
11. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
Account Codes
To create Verified Account Codes using either a large-
display or small-display phone:
1. Enter “User Maintenance” by pressing ON/OFF PROG * * CONF.
2. Enter: 04 and press HOLD HOLD.
3. Enter: Verified Account Table Number 001-500 and press
HOLD HOLD.
4. Enter: Account Code - up to 10 digits, press HOLD, enter: TRS
Class No. 1-50, and press HOLD.
5. Press the VOLUME up or down arrow or HOLD to toggle through the entry
nos. for adding another Account Code.
6. Repeat steps 4-5 above until all account numbers are entered.
7. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
36
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
Call Forwarding
To set or assign Call Forward Busy Destination for an
extension using either a large-display or small-display
phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2. Enter: 09, press HOLD, enter: 0 and press HOLD.
3. Dial the Extension Number and press HOLD.
4. Enter: Destination Extension.
5. Press HOLD to store the entry.
6. To set Call Forward Busy destinations for additional extensions, press the
VOLUME up or down arrow or HOLD to move to the desired Extension.
7. Repeat steps 5-6 until all extension are entered.
8. Press MEMORY PROG to return to “81 - User Maintenance” (step 1)
OR...
Press MEMORY ON/OFF to exit User Maintenance.
To set or assign Call Forward - No Answer Destination for
an extension using either a large-display or small-display
phone:
1. Enter “User Maintenance” by pressing ON/OFF PROG * * CONF
2. Enter: 09, press HOLD, enter: 1, and press HOLD.
3. Dial the Extension Number and press HOLD.
4. Dial the Destination Extension.
5. Press HOLD to store the entry.
6. To set Call Forwarding - No Answer destinations for additional extensions,
press the VOLUME up or down arrow or HOLD to move to the desired
Extension.
7. Repeat steps 5-6 until all extensions are entered.
8. Press MEMORY PROG to return to “81 - User Maintenance” (step 1)
OR...
Press MEMORY ON/OFF to exit User Maintenance.
ICX-50-750
ICX (International), issued October 2000
37
2. Setting Up Your Phone
Caller ID Call Log
To set or assign Caller ID Logging for an extension using
either a large-display or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2. Enter: 10, press HOLD HOLD, and enter: Log Control Number.
3. Press HOLD, dial the Extension Number, and press HOLD to store
the entry.
4. To set CID Log for additional extensions, press the VOLUME up or down
arrow or HOLD to move to the desired extension.
5. Repeat step 3 until all extensions are entered.
6. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
Day/Night System Mode
To set the Day of Week modes using either a large-display
or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2. Enter: 07, press HOLD, enter: 3, and press HOLD HOLD.
3. Enter pattern: (0 - no pattern, 1 - pattern 1, 2 - pattern 2, 3 -
pattern 3) for the first Sunday and press HOLD to store the entry.
Note: To clear an entry or existing data, press the FL/R key.
4. To set additional Day of Week modes, press the VOLUME up or down arrow
or HOLD to move to the desired mode.
5. Repeat steps 4-5 until the remaining days in the month are set.
Note: Entry positions are listed in Section 700 - Feature Operations.
6. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
38
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
To set the Exception Day Modes using either a large-
display or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2. Enter: 07, press HOLD, enter: 2, and press HOLD HOLD.
3. Enter: Start Date by Month - two characters and Day - two
characters for Exception Period 1 and press HOLD to store the entry.
Note: To clear an entry or existing data, press the FL/R key.
4. To set additional Exception Day modes, press the VOLUME up or down
arrow or HOLD to move to the desired mode.
5. Repeat steps 4-5 until the remaining days in the month are set.
6. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
To set the Mode Schedule using either a large-display or
small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2. Enter: 07, and press HOLD HOLD HOLD.
3. Enter: Start Time in Hours (two characters) and Minutes
(two characters) for Pattern 1 - first mode and press HOLD.
Notes: To clear an entry or existing data, press the FL/R key.
4. Enter: Desired Mode for Pattern 1 - first (0 - None, 1 - Day 1,
2 - Day 2, 3 - Night, 4 - Night 1, 5 - Night 2) and press HOLD to
store the entry.
Note: To clear an entry or existing data, press the FL/R key.
5. To set additional mode schedules, press the VOLUME up or down arrow or
HOLD to move to the desired mode.
6. Repeat steps 3-5 until all patterns and modes are set. (There are 3 total patterns
with 5 start time/modes each.)
Note: Entry Positions are listed in Chapter 4 of Section 700 - Feature Operations.
ICX-50-750
ICX (International), issued October 2000
39
2. Setting Up Your Phone
7. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
To set the Special Day Modes using either a large-display
or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2. Enter: 07, press HOLD, enter: 1, and press HOLD HOLD.
3. Enter: Start Time in Hours - 2 characters, and Minutes - 2
characters for the Special Day 1 mode and press HOLD to store the
entry.
Note: To clear an entry or existing data, press the FL/R key.
4. Enter: Desired mode for Special Day: 0 - None, 1 - Day 1, 2
- Day 2, 3 - Night, 4 Night 1, 5 - Night 2 and press HOLD to store
the entry.
Note: To clear an entry or existing data, press the FL/R key
5. To set additional Special Day modes, press the VOLUME up or down arrow
or HOLD to move to the desired mode.
6. Repeat steps 3-5 until all Special Day modes are set. (Up to 20 Special Days
may be entered.).
Note: The entry positions are listed in Chapter 4 of Section 700 - Feature Operations.
7. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
Message Key
To set the Message Key ID code using either a large-
display or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2. Enter: 06 and press HOLD HOLD.
3. Dial the Extension Number of the Phone Being
Programmed and press HOLD.
40
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
4. Enter: Message Key ID Code and press HOLD to store the entry.
Note: The ID code may contain up to 16 digits and contain 0, 1-9, *, #, pause (REDIAL
key).
•
To clear an entry or existing data, press the FL/R key.
5. To set additional Message Key ID codes, press the VOLUME up or down
arrow or HOLD to move to the desired extension.
6. Repeat steps 4-5 until all Message Key ID codes are set.
7. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
Name Assignments
To set extension names using either a large-display or
small-display phone:
1. Enter “User Maintenance” by pressing ON/OFF PROG * * CONF
2. Enter: 03 and press HOLD HOLD HOLD.
3. Dial the Extension Number and press HOLD.
4. Enter: Extension Name:
•
•
If using a large-display phone, press the soft key next to the desired row of letters.
If using a small-display phone press the appropriate one-touch key.
Note: Press the FL/R key to clear any existing data
5. Use the bottom row of FF keys to select a single letter.
Notes:
•
•
Press the * key to erase a single entry.
Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired speed dial
name.
Note: Press the FL/R key to clear the entire entry.
7. Press HOLD to store the entry.
8. To set additional extension names, press the VOLUME up or down arrow or
HOLD to move to the desired SSD.
ICX-50-750
ICX (International), issued October 2000
41
2. Setting Up Your Phone
9. Repeat steps 4-8 until all extension names are entered.
10. Press MEMORY PROG to return to “81 - User Maintenance” (step 1)
OR...
Press MEMORY ON/OFF to exit User Maintenance.
Send Text Messages
To create Send Text Messages using either a large-display
or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.
2. Enter: 11, press HOLD, enter: 0, and press HOLD.
3. Press HOLD, enter: Message Number (0-9), and press HOLD.
4. Enter: Text Message (up to 15 characters):
•
•
If using a large-display phone, press the soft key next to the desired row of letters.
If using a small-display phone press the appropriate one-touch key.
Note: Press the FL/R key to clear any existing data.
5. Use the bottom row of FF keys to select a single letter.
Notes:
•
•
Press the * key to erase a single entry.
Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired Text Message
and press HOLD to store the entry.
Note: Press the FL/R key to clear any existing data.
7. To set additional text messages, press the VOLUME up or down key or press
HOLD to move to the desired Send Text Message.
8. Repeat steps 4-7 until all Send Text Messages are entered.
9. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
42
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
Speed Dial
To set or assign PSD numbers using either a large-display
or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.
2. Enter: 01 and press HOLD HOLD HOLD.
3. Dial the Extension Number and press HOLD.
4. Enter: PSD Bin Number (80-99) and press HOLD.
5. Enter: PSD Digits to be dialed and press HOLD to store the entry.
Note: To clear an entry or existing data, press the FL/R key.
6. To set additional PSD numbers, press the VOLUME up or down key or
HOLD to move to the desired PSD bin number.
7. Repeat steps 5-6 until all PSD numbers are entered.
8. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
To set or assign SSD numbers using either a large-display
or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.
2. Enter: 02 and press HOLD HOLD HOLD.
3. Enter: SSD Bin Number (00-79 or 000-799) and press HOLD.
4. Enter: SSD Digits to be dialed and press HOLD to store the entry.
Note: Press the FL/R key to clear an entry or any existing data.
5. To set additional SSD numbers, press the VOLUME up or down key or
HOLD to move to the desired SSD.
6. Repeat steps 4-5 until all SSDs are entered.
7. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
ICX-50-750
ICX (International), issued October 2000
43
2. Setting Up Your Phone
To create SSD indexes using either a large-display or
small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * *
CONF.
2. Enter: 02, press HOLD, enter: 2, and press HOLD HOLD.
3. Enter: SSD Index Number (1-2) and press HOLD.
4. Enter: SSD Index Name:
•
•
If using a large-display phone, press the soft key next to the desired row of
letters.
If using a small-display phone press the appropriate one-touch key.
Note: Press the FL/R key to clear any existing data.
5. Use the bottom row of FF keys to select a single letter.
Notes:
•
•
Press the * key to erase a single entry.
Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired SSD
name.
Note: Press the FL/R key to clear the entire entry.
7. Press HOLD to store the entry.
8. To set additional SSD index names, press the VOLUME up or
down key or HOLD to move to the desired SSD.
9. Repeat steps 6-9 until all SSD indexes are entered.
10. Press MEMORY PROG to return to “81-User Maintenance”
(step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
System Clock: Date/Time/Day
To change the system date, time, and day:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.
2. Enter: 000 and press HOLD.
44
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
3. Enter: The Year (two characters), Month (two characters),
and Day (two characters) and press HOLD.
Note: Press the FL/R key to clear any existing data.
4. Enter: The Hour (two characters) and Minute (two
characters) and press HOLD.
Note: Press the FL/R key to clear any existing data.
5. Enter: The Day of Week where:
1 = Mon, 2 = Tues., 3 = Wed., 4 = Thurs., 5 = Fri., 6 = Sat.,
0 = Sun
and press HOLD to store the entry.
Note: Press the FL/R key to clear any existing data.
6. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
Text Message Replies
To create Text Message Replies using either a large-
display or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.
2. Enter: 11, press HOLD, enter: 1, and press HOLD.
3. Press HOLD, enter: Message Number (0-9), and press HOLD.
4. Enter: Text Message (up to 15 characters):
•
•
If using a large-display phone, press the soft key next to the desired row of letters.
If using a small-display phone press the appropriate one-touch key.
Note: Press the FL/R key to clear any existing data.
5. Use the bottom row of FF keys to select a single letter.
Notes:
•
•
Press the * key to erase a single entry.
Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired Text Message
and press HOLD to store the entry.
Note: Press the FL/R key to clear any existing data.
ICX-50-750
ICX (International), issued October 2000
45
2. Setting Up Your Phone
7. To set additional text messages, press the VOLUME up or down key or press
HOLD to move to the desired Reply Text Message.
8. Repeat steps 4-7 until all Reply Text Messages are entered.
9. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
Voice Mail: Set Call-Forward ID Codes
To set the Call Forward ID code using either a large-
display or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.
2. Enter: 05 HOLD HOLD.
3. Dial the Extension Number and press HOLD.
4. Enter: Call Forward ID Code and press HOLD to store the entry.
Notes:
•
•
The ID code may contain up to 16 digits and contain 0, 1-9, *, #, pause (REDIAL key).
To clear an entry or any existing data, press the FL/R key.
5. To set additional additional Call Forward ID Codes, press the VOLUME up
or down arrow or HOLD to move to the desired SSD.
6. Repeat steps 4-5 until all SSD indexes are entered.
7. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
Walking TRS Class of Service (Call Barring)
To set Walking TRS (Call Barring) codes using either a
large-display or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.
2. Enter: 08 and press HOLD HOLD.
46
ICX (International), issued October 2000
ICX-50-750
2. Setting Up Your Phone
3. Dial the Extension Number and press HOLD.
4. Enter: 4-digit Walking TRS Code.
5. Press HOLD to store the entry.
6. To set additional extension Walking TRS Codes, press the VOLUME up or
down arrow or HOLD to move to the desired extension.
7. Repeat steps 5-6 until all extension are entered.
8. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
ICX-50-750
ICX (International), issued October 2000
47
2. Setting Up Your Phone
This page intentionally left blank.
48
ICX (International), issued October 2000
ICX-50-750
3. PLACING OUTSIDE CALLS
Your digital phone, in conjunction with the ICX and S-ICX, provides the following
ways for you to place outside calls:
•
•
•
•
Accessing an Outside Line (page 49)
Using Account Codes (page 50)
Redialing Outside Numbers (page 51)
Using Speed Dialling (page 52).
ACCESSING AN OUTSIDE LINE
You can place outside calls using the following features or under the following
conditions:
•
•
•
Outside line access group code
Flexible Function (FF) keys
Open line call back.
To make an outside call using an outside line access code
1. Pick up the handset or press the ON/OFF key.
2. Enter an access code for an outside line access group (9 [UK/HK], 0 [Taiwan,
Malaysia, Indonesia], or 81-84).
3. Dial the phone number.
Notes:
•
•
If all outside lines in the group are busy, you will hear a busy tone.
If the system is set up for Automatic Route Selection (ARS), dialling 9 (UK/
HK) or 0 (Taiwan, Malaysia, Indonesia) automatically routes your call to a
selected outside line.
To make an outside call using an FF key
1. Pick up the handset or press the ON/OFF key.
2. Press an FF key that is dedicated to an outside line or to a group of outside lines.
3. Dial the phone number.
ICX-50-750
ICX (International), issued October 2000
49
3. Placing Outside Calls
To have a busy outside line call you back once it is open
1. Pick up the handset or press the ON/OFF key.
2. Attempt to access an outside line.
3. When you hear the busy tone, enter the Callback Request code (default = 3 (HK/
UK) or 3#).
4. Press the ON/OFF key again and wait for the callback tone. (When the outside
line is available, your phone rings and the FF key for the outside line flashes.)
5. Pick up the handset or press the ON/OFF key.
6. Dial the phone number.
Note: You must respond to the callback tone within 15 seconds.
To cancel a callback request
1. Pick up the handset or press the ON/OFF key.
2. Dial the Callback cancellation code (default = 769 (HK/UK) or 769#).
3. Replace the handset.
USING ACCOUNT CODES
You can assign account codes (both non-verified account codes and verified ID
codes) to clients to help track a variety of information; such as, call dates and times,
numbers called, and outside line numbers used. This information is then printed for
each account on a System Message Detail Recording (SMDR) (Call Logging)
record.
Note: An SMDR (Call Logging) printer or external call accounting system is
required to collect account code records.
Non-verified Account Codes
Non-verified account codes are voluntary and do not have to be entered before you
make a call. They can also be assigned to both incoming and outgoing calls.
You can enter a non-verified account code before making a call or during a call.
To enter a non-verified account code before making a call
1. Pick up the handset or press the ON/OFF key.
2. Enter the Account Code code (default = 8#).
50
ICX (International), issued October 2000
ICX-50-750
3. Placing Outside Calls
3. Enter the Account Code (up to 4 digits or up to 10 digits, depending on the
setting).
4. Press the # key.
5. Dial 9 (UK/HK) or 0 (Taiwan, Malaysia, Indonesia) or press an FF key that is
dedicated to an outside line.
6. Dial the phone number.
To enter a non-verified account code during a call
1. During a call, press the MEMORY key.
2. Press the # key.
3. Enter the Account Code (up to 4 digits or up to 10 digits, depending on the
setting).
4. Press the # key.
Verified Account Codes
Verified ID codes are required by extensions that have restrictions on placing
outgoing calls (i.e., a specific code is required to place an outgoing call).
To make an outside call that requires an account code
1. Pick up the handset or press the ON/OFF key.
2. Enter the Verified Account ID Code feature access code (default = 8#).
3. Enter the Verified Account code. The entered code may be up to 4 digits or up to
10 digits, depending on the setting.
4. Press the # key.
5. Dial 9 (UK/HK) or 0 (Taiwan, Malaysia, Indonesia) or press an FF key that is
dedicated to an outside line.
6. Dial the phone number.
REDIALING OUTSIDE NUMBERS
You can use the REDIAL key to redial the last number dialled or to redial a busy
number.
ICX-50-750
ICX (International), issued October 2000
51
3. Placing Outside Calls
To redial the last number dialled
1. Pick up the handset or press the ON/OFF key.
2. Access an outside line.
3. Press the REDIAL key. (The phone displays and dials the last outside number
dialled.)
To automatically redial a busy number
Note: The system will continue to redial the busy number until you hang up the
phone, the called party answers the call, or a maximum of 15 redial attempts is made.
1. Pickup the handset or press the ON/OFF key.
2. Access an outside line.
3. Dial the phone number.
4. After hearing the busy tone, press the REDIAL key. (The phone continues to dial
the busy number until the caller answers or the redial timer times out.)
To cancel automatic repeat dialling
1. Replace the handset or press the ON/OFF key.
USING SPEED DIALLING
After PSD numbers and SSD numbers have been assigned, you can quickly dial the
number by pressing the appropriate one-touch or soft key or by entering the
appropriate speed dial bin number. (For information on assigning PSD and SSD
numbers, see “Setting Up Speed Dialling” on page 25.) You can also check and see
what PSD and SSD number or name is assigned to specific one-touch or soft keys.
Notes:
•
For information on deleting PSD numbers, see “Assigning and Deleting PSD
Numbers” on page 25.
•
You cannot delete SSD numbers assigned to one-touch or soft keys. These
numbers are programmed from the attendant’s phone.
Dialling Speed Dial Numbers
You can dial speed dial numbers by using preassigned one-touch keys on non-
display or small-display phones, using soft keys and speed dial directories, or by
entering speed dial bin numbers.
52
ICX (International), issued October 2000
ICX-50-750
3. Placing Outside Calls
To dial a speed dial number by pressing a one-touch key
1. Pickup the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. Press the desired one-touch key.
To dial a speed dial number using the soft keys on a small-
display phone
1. Press the MODE key one time. (SSD and PSD appear on the second line of the
display.)
2. Press the soft key next to SSD or PSD. (The first two speed dial entries appear
on the second line of the display.)
3. Scroll through the speed dial directory until the desired speed dial entry is
displayed. (To display the next two entries, press the # key. To display the
previous two entries, press the * key.)
4. Pick up the handset or press the ON/OFF key.
5. If necessary, access an outside line.
6. Press the soft key next to the desired speed dial entry to initiate dialling.
To dial a speed dial number using the soft keys on a large-
display phone
1. From the Main Menu, press the soft key to the left of SYSTEM DIAL or
PERSONAL DIAL. (In the PSD directory, the first 10 speed dial entries are
displayed. In the SSD directory, 10 alphabetical entries are displayed.)
2. For the PSD directory, proceed to step 3.
For the SSD directory, press the soft key to the left of the desired group of letters
to display the first five speed dial entries.
3. Scroll through the speed dial directory until the desired speed dial entry is
displayed. (To scroll forward in either directory, press the NEXT key. To scroll
backwards in either directory, press the PREV key.)
4. Pick up the handset or press the ON/OFF key.
5. If necessary, access an outside line.
6. Press the soft key next to the desired speed dial entry to initiate dialling.
ICX-50-750
ICX (International), issued October 2000
53
3. Placing Outside Calls
To dial a speed dial number by entering the speed dial bin number
Note: You must know the PSD or SSD bin number for the number to be dialled to
perform this task. For information on determining speed dial numbers, see
““Checking Speed Dial Numbers” on page 54.
1. Pick up the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. Press the MEMORY key.
4. Enter the appropriate three digit speed dial bin number (PSD bins 80-99 or SSD
bins 00-79 or 000-799).
Checking Speed Dial Numbers
After speed dial numbers have been assigned, you can check to see what number has
been programmed by using soft keys or by entering the speed dial bin number.
Note: The following tasks require a display phone. To check speed dial numbers on
a non-display phone, see Appendix B, “Customized PSD Bin Numbers” on page 101
for your personalized list of speed dial numbers.
To check a speed dial number using the soft keys on a small-
display phone
1. Press the MODE key one time. (SSD and PSD appear on the second line of the
display.)
2. Press the soft key next to SSD or PSD. (The first two speed dial entries appear
on the second line of the display.)
3. Scroll through the speed dial directory until the desired speed dial bin entry is
displayed. (To display the next two entries, press the # key. To display the
previous two entries, press the * key.)
4. Pick up the handset or press the ON/OFF key.
5. Press the CONF key.
6. Press the soft key next to the speed dial entry. (The speed dial number appears on
the display.)
54
ICX (International), issued October 2000
ICX-50-750
3. Placing Outside Calls
To check a speed dial number using the soft keys on a large-
display phone
1. From the Main Menu, press the soft key to the left of SYSTEM DIAL or
PERSONAL DIAL. (In the PSD directory, the first 10 speed dial entries are
displayed. In the SSD directory, 10 alphabetical entries are displayed.)
2. For the PSD directory, proceed to step 3.
For the SSD directory, press the soft key to the left of the desired group of letters
to display the first five speed dial entries.
3. Scroll through the speed dial directory until the desired speed dial entry is
displayed. (To scroll forward in either directory, press the NEXT key. To scroll
backwards in either directory, press the PREV key.)
4. Pick up the handset or press the ON/OFF key.
5. Press the CONF key.
6. Press the soft key next to the speed dial entry. (The speed dial number appears on
the first line of the display. The speed dial bin number appears on the second line
of the display, along with any name that has been assigned to the speed dial
number.)
To check speed dial entries by entering the speed dial bin number
1. Pick up the handset or press the ON/OFF key.
2. Press the CONF key.
3. Press the MEMORY key.
4. Enter the appropriate PSD bin number (80-99) or SSD bin number (00-79 or 000-
799). (The speed dial number appears on the first line of the display. The speed
dial bin number appears on the second line of the display, along with any name
that has been assigned to the speed dial number.)
ICX-50-750
ICX (International), issued October 2000
55
3. Placing Outside Calls
This page intentionally left blank.
56
ICX (International), issued October 2000
ICX-50-750
4. HANDLING INCOMING CALLS
You can handle calls that reach your phone in a variety of ways:
•
•
•
•
•
Answer Calls (page 57)
Use Call Hold (page 58)
Transfer Calls (page 59)
Use Call Pickup (page 61)
Use Call Park (page 63).
ANSWERING CALLS
You can answer various types of calls using the following procedure:
To answer a call
1. Pick up the handset or press the ON/OFF key.
2. Do one of the following:
To answer . . .
Do the following . . .
a. Press the flashing FF key.
A call ringing at someone
else’s phone
OR
a. Enter the Direct Call Pickup Set code (default
= 704 (HK/UK) or 704#).
b. Dial the number of the ringing extension.
A call ringing a phone within
your call pickup group
Enter the All Calls Pickup Set code (default =
701(HK/UK) or 701#).
An external call ringing a
phone within your call pickup
group
Enter the External Call Pickup Set code (default =
702 (HK/UK) or 702#).
a. Enter the Specified Group Pickup Set code
A call ringing outside your call
pickup group
(default = 703 (HK/UK) or 703#).
b. Enter the number of the call pickup group (01-
72) where the phone is ringing.
3. Complete the call, and replace the handset or press the ON/OFF key.
ICX-50-750
ICX (International), issued October 2000
57
4. Handling Incoming Calls
USING CALL HOLD
Depending on the set up of your system, you can put one or more calls on hold and
retrieve those calls using the HOLD key or a designated Floating Hold key.
Notes:
•
The Floating Hold feature assigns a Floating Hold number (001-576 for ICX)
(001-096 for S-ICX) to a specific FF key. By placing a call on hold using the
Floating Hold key, you can retrieve the call from any phone that has an FF key
that is assigned the same Floating Hold number or by simply entering the
Floating Hold number.
•
•
Floating Hold requires system programming.
The EXT indicator flashes when you hold an internal call or an outside line
that is not assigned to an FF key.
•
If you do not pick up a held call in a certain period of time, you will hear a
tone indicating that the call is still waiting.
To place a call on hold
1. While on a call, press the HOLD key or the Floating Hold FF key.
To use Broker’s Hold and toggle between two calls
1. While on a call, press the HOLD key to put the first call on hold.
2. Press the FF key that is flashing green to answer the second call.
3. Press the HOLD key to put the second call on hold.
4. Press the FF key that is flashing green to return to the first call.
To retrieve a call placed on hold, do one of the following:
To retrieve a call . . .
Do . . .
Press the FF key that is flashing green.
OR
From the extension that placed
the call on hold
Press the HOLD key (if no FF key is flashing).
58
ICX (International), issued October 2000
ICX-50-750
4. Handling Incoming Calls
To retrieve a call . . .
Do . . .
From a different extension
than the one that placed the
call on hold
Press the FF key that is flashing red.
a. Press the Floating Hold FF key.
From Floating Hold (also
known as Station Park Pick
Up)
OR
a. Enter the Floating Hold Answer code (default
= *9).
b. Enter the Floating Hold orbit number (001-
576[CPC-288/576], 01-96 [CPC-96, HS/HM]
or 001-099 [CPC-288/576] or 01-09 [CPC-96,
HS/HM]. See the note below.
Note: The number of floating hold orbits available may very depending on the
Station Park/Floating Hold Pickup setting (FF1-0-02-0025). The station park/floating
hold pickup code can be set to *9 (default), 733 (UK/HK), or 733#. The floating hold
pickup code (*9) operates as follows:
System Size
Virtual Line Number and Operation
96
01-09 Floating Hold pick up
10-96: Station Park Hold pick up purpose
Above 96
IXC system only
001-099 Floating Hold pick up
100-576: Station Park Hold pick up purpose
TRANSFERRING CALLS
You can transfer a call to an open extension, a busy extension, or an outside line.
These transfers can be either supervised or unsupervised.
Note: If a transferred call is not answered within a specified time, the call rings
again at the extension that transferred it.
Supervised Transfers
In a supervised transfer, you announce the call before transferring it. This allows
you to give the recipient information about the call.
To supervise the transfer of a call to another extension or an
outside number
1. While on a call, press the HOLD key.
ICX-50-750
ICX (International), issued October 2000
59
4. Handling Incoming Calls
2. Either dial the extension number or the outside line number to which the call will
be transferred.
3. When the recipient answers, announce the call.
4. Complete the call by doing one of the following:
a. If On-hook Transfer is enabled for your extension, replace the handset or
press the ON/OFF key.
b. If On-hook Transfer is disabled for your extension, press the PROG key.
Note: On-hook Transfer requires system programming.
Unsupervised Transfers
In an unsupervised transfer, you do not announce the call to the person receiving the
transfer. You hang up before the recipient answers the call.
To transfer a call to another extension or an outside number
without supervising the call
1. While on a call, press the HOLD key.
2. Either dial the extension number or the outside line number to which the call will
be transferred.
3. Complete the call by doing one of the following:
a. If On-hook Transfer is enabled for your extension, replace the handset or
press the ON/OFF key.
b. If On-hook Transfer is disabled for your extension, press the PROG key.
Note: On-hook Transfer requires system programming.
To transfer a call to a busy extension
1. While on a call, press the HOLD key.
2. Dial the extension number to which the call will be transferred.
3. If your extension does not have Auto Camp-on activated, enter the Camp-on
(Call Waiting) Set code (default = 2 (HK/UK) or 2#). Otherwise proceed to step
4.
4. Complete the call by doing one of the following:
60
ICX (International), issued October 2000
ICX-50-750
4. Handling Incoming Calls
a. If On-hook Transfer is enabled for your extension, replace the handset or
press the ON/OFF key.
b. If On-hook Transfer is disabled for your extension, press the PROG key.
Note: On-hook Transfer requires system programming.
CALL PICKUP
The System allows the following types of Call Pickup:
•
•
•
•
Extension Group Pickup
Extension Direct Pickup
Trunk Group Pickup
Trunk Direct Pickup.
Extension Group Pickup
Extension Group Pickup allows you to pick up a direct ringing call (within your
extension pickup group or in a different extension pickup group) without having to
dial the number of the ringing extension.
Three types of Extension Group Pickup are available:
•
•
•
Call Pickup-All Calls: you can pick up a direct call ringing anywhere within
your own extension group.
Call Pickup-External Calls: You can pick up only direct external calls
ringing within your own extension group.
Specified Group Pickup: You can pick up a call ringing to an extension in
another extension group.
To use Extension Group Pickup - All Calls
1. Lift the handset or press the ON/OFF key.
2. Enter the Extension Group Pickup- All Calls code (default = 701 (HK/UK) or
701#).
3. Complete the call and replace handset or press the ON/OFF key.
To use Extension Group Pickup - External Calls
1. Lift the handset and press the ON/OFF key.
2. Enter the Extension Group Pickup-External Calls code (default = 702 (HK/UK)
or 702#).
ICX-50-750
ICX (International), issued October 2000
61
4. Handling Incoming Calls
3. Complete the call and replace the handset or press the ON/OFF key.
To use Specified Group Pickup All Calls
1. Lift the handset or press the ON/OFF key.
2. Enter the Specified Group Pickup access code (default = 703 (HK/UK) or 703# ).
3. Enter the number of the Call Pickup Group (01-72) where the call is ringing.
4. Complete the call and replace the handset or press the ON/OFF key.
Extension Direct Pickup
Extension Direct Pickup allows you to answer a call to another extension by dialling
the number of the ringing extension.
To use Extension Direct Pickup
1. Lift the handset or press the ON/OFF key.
2. Enter the Extension Direct Call Pickup code (default = 704 (HK/UK) or 704#).
3. Dial the number of the ringing extension.
4. Complete the call and replace the handset or press the ON/OFF key.
Trunk Group Pickup
Trunk Group Pickup allows you to answer calls ringing to any extension within your
own MCO incoming trunk group.
To use Trunk Group Pickup
1. Lift the handset or press the ON/OFF key.
2. Enter the Trunk Group Pickup code (default = 709 (HK/UK) or 709#).
3. Complete the call and replace the handset or press the ON/OFF key.
Trunk Direct Pickup
Trunk Direct Pickup allows you to answer calls ringing on a specific trunk number.
To use Trunk Direct Pickup
1. Lift the handset or press the ON/OFF key.
2. Enter the Trunk Direct Pickup code (default = *0).
62
ICX (International), issued October 2000
ICX-50-750
4. Handling Incoming Calls
3. Dial the number of the ringing trunk.
4. Complete the call and replace the handset or press the ON/OFF key.
CALL PARK
You can use the Call Park function to transfer a call, even if you cannot locate the
intended recipient of the call.
There are two ways for an extension to park a call on the ICX and S-ICX. One way
is to park the call at the receiving extension and to retrieve the call at another
extension by dialling the park answer code plus the parking extension number. The
other way is to park the call at another extension and dial the park transfer answer
code at the other extension to retrieve the call.
To park a call on this extension
1. While on a call, press the HOLD key.
2. Enter Call Park access code (default = 771 (HK/UK) or 7711#) or press the
PARK HOLD key.
3. If necessary, page the party that needs to receive the call.
To retrieve a call parked at another Extension
1. Lift the handset or press the ON/OFF key.
2. Enter the Call Park Answer/Other Extension access code (default =773 (HK/UK)
or 773#).
OR
Enter the Call Park/Floating Hold Answer feature access code (default =
*9).
3. Dial the number of the extension that parked the call.
To park a call at another extension
1. While on a call, press the HOLD key.
2. Enter the Call Park Transfer access code (default = 774) followed by the
extension number to receive the parked call.
OR
Press the BLF Key.
ICX-50-750
ICX (International), issued October 2000
63
4. Handling Incoming Calls
To retrieve a call parked on this extension
1. At the extension with the transferred park call, lift the handset or press the ON/
OFF key.
2. Enter the Call Park Answer/Self Access Code (default = 772 (HK/UK) or 772#).
3. If necessary, page the party that needs to retrieve the call.
64
ICX (International), issued October 2000
ICX-50-750
5. COMMUNICATING WITHIN YOUR OFFICE
The ICX and S-ICX provides a variety of ways to handle calls within your office:
•
•
•
•
•
•
•
•
•
•
•
Calling Other Extensions (page 65)
Switching Between Tone and Voice Calling (page 66)
Using Paging (page 67)
Answering a Page with Universal Night Answer (page 68)
Making Announcements to Busy Extensions (page 68 )
Using Call Forwarding (page 69)
Using Camp-on (Call Waiting) (page 72)
Using Message Waiting/Callback (page 75)
Using Do-Not-Disturb (page 76)
Using Absence Messages (page 77)
Locking Your Extension (page 78).
CALLING OTHER EXTENSIONS
You can call other extensions by entering the extension number or by using the soft
keys and Extension Directory. While making a call, you can also specify whether to
use tone calling or voice calling.
To call another extension by entering the extension number
1. Pick up the handset or press the ON/OFF key.
2. Dial the desired extension or dial 0 for the operator.
To call another extension using the soft keys on a small-display
phone
1. Press the MODE key twice. (EXT appears on the second line of the display.)
2. Press the soft key next to EXT. (The first two extension entries appear on the
second line of the display.)
3. Scroll through the directory until the desired extension entry is displayed. (To
display the next two entries, press the # key. To display the previous two entries,
press the * key.)
ICX-50-750
ICX (International), issued October 2000
65
5. Communicating Within Your Office
4. Pick up the handset or press the ON/OFF key.
5. Press the soft key next to the desired extension entry to initiate dialling.
To call another extension using the soft keys on a large-display
phone
1. From the Main Menu, press the soft key to the left of EXTENSION. (10
alphabetical entries are displayed.)
2. Press the soft key to the left of the desired group of letters to display the first five
extension entries.
3. Scroll through the extension directory until the desired extension entry is
displayed. (To scroll forward, press the NEXT key. To scroll backwards, press
the PREV key.)
4. To scroll forward in the directory, press the NEXT key. To scroll backwards in
the directory, press the PREV key.
5. Pick up the handset or press the ON/OFF key.
6. Press the soft key next to the desired extension entry to initiate dialling.
Switching Between Tone and Voice Calling
You can call another extension using tone calling or voice calling. Tone calling
sends a ringing tone to the called extension, where voice calling performs like an
intercom call and connects immediately without ringing the extension. (If desired,
the called party can answer a voice call without lifting the handset.)
System programming determines the default calling mode; however, you can switch
between tone and voice calling by entering 1.
To switch between tone to voice calling
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. If your phone is set for tone calling and you want to make a voice call, enter 1.
(Or if your phone is set for voice calling and you want to make a tone call, enter
1.)
4. Speak when the call is answered.
5. Replace the handset or press the ON/OFF key.
66
ICX (International), issued October 2000
ICX-50-750
5. Communicating Within Your Office
USING PAGING
You can make both internal and external pages and announcements. Internal pages
are made via the key telephone speakers and external pages are made through the
speakers of an external paging system connected to the ICX and S-ICX system.
When you issue a page, you specify a paging group so that your announcement is
heard only on the phones that are members of that group.
You can answer a page from any extension using the Meet-Me Answer feature.
Note: You can belong to more than one paging group.
To page another party or make an announcement
1. Pick up the handset or press the ON/OFF key.
2. Enter the Page Group code (default = #).
3. Enter the number of the desired page group (0-9).
4. Make your announcement.
5. Do one of the following:
If . . .
Then . . .
You want to end the page
Replace the handset or press the ON/
OFF key.
Note: To avoid an abrupt “hang-up”
sound, press the FL/R key before
replacing the handset.
You want to get a response from some-
one answering the page at an extension
Do not hang up; wait for the paged party
to answer.
Answering a Page (Meet-Me Answer)
You can answer a page from any extension using the Meet-Me Answer feature.
To answer a page using Meet-Me Answer
1. Pick up the handset or press the ON/OFF key.
2. Enter the Meet-Me Answer code (default = ##). (You are connected to the party
trying to reach you.)
ICX-50-750
ICX (International), issued October 2000
67
5. Communicating Within Your Office
ANSWERING A PAGE WITH UNIVERSAL NIGHT
ANSWER
During night mode, Universal Night Answer (UNA) sends incoming calls for
selected trunks to ring external paging speakers. UNA calls can be picked up from
any extension, provided the extension’s COS allows UNA answer.
This feature can also be programmed so that incoming calls ring on both external
paging speakers and at extensions with CO/MCO appearances on FF keys (Key Tele-
phones only).
To answer a UNA call
1. Pick up the handset or press the ON/OFF key.
2. Enter the UNA to Page Pickup code (default = 705 [HK/UK] or 705#).
To answer a UNA call using the assigned FF key
1. Pick up the handset or press the ON/OFF key.
2. Press the assigned FF or UNA key.
MAKING ANNOUNCEMENTS TO BUSY EXTENSIONS
Note: This feature requires system programming or a specific ICX and S-ICX
configuration, and may not be available. For information, see your system
administrator or ICX and S-ICX dealer.
This feature (also known as Off-Hook Voice Announce [OHVA]) allows you to
make an announcement to a busy extension.
If party you called is using a digital key telephone, the announcement is heard only
by the called party, not by the other party he or she is talking to. If, however, the
party you called is using a single-line telephone, both the called party and the party
he or she is talking to will hear the announcement.
To make an announcement
1. Pick up the handset or press ON/OFF.
2. Dial the extension number.
3. Press 8 if you hear the busy tone.
68
ICX (International), issued October 2000
ICX-50-750
5. Communicating Within Your Office
4. Make your announcement. (Your voice is heard on the extension, not on the other
line.)
Answering an Announcement
To answer an announcement, you can use the OHVA Split key to speak to the
announcing party or you may send a text message.
The OHVA Split key is an FF key that has been assigned to the OHVA function. The
OHVA function is typically used in situations where the extension user must handle
more than one call. The Split key must be set up by the system administrator or
dealer.
To speak to the announcing party
1. While on a call, press the OHVA Split key.
2. Speak with the announcing party.
3. Press the OHVA Split key to return to the original call.
Transferring Calls with an Announcement
Note: This feature requires system programming or a specific ICX and S-ICX
configuration, and may not be available. For information, see your system
administrator or ICX and S-ICX dealer.
To transfer a call while making an announcement
1. While remaining on the line with the original party, press the HOLD key.
2. Dial the extension number.
3. When you hear a busy tone, press 8.
4. Make your announcement.
5. When you are connected to the called party, replace the handset or press the ON/
OFF key.
USING CALL FORWARDING
You can send or forward your calls to another extension, an outside line, or to voice
mail from either your extension or from an alternate extension.
ICX-50-750
ICX (International), issued October 2000
69
5. Communicating Within Your Office
Notes:
•
•
•
•
Any outside number used for Call Forwarding must already be programmed
into system speed dialling.
Calls cannot be forwarded to an extension that already has Call Forwarding
set or Do-Not-Disturb (DND) turned on.
The system allows you to cancel Call Forwarding and DND for your
extension in one step.
Calls can be forwarded by an extension with an NPDN or PNPDN if the COS
gives permission.
To set Call Forwarding
1. Pick up the handset or press the ON/OFF key.
2. Do one of the following:
To forward . . .
Do . . .
All incoming calls
Enter the appropriate Call Forwarding - All Calls Set
code:
•
•
For your extension, enter 721 (HK/UK) or 721#
For another extension, enter 741 (HK/UK) or
741#
All incoming calls that ring a
busy extension
Enter the appropriate Call Forwarding - Busy Set code:
•
•
For your extension, enter 722 (HK/UK) or 722#
For another extension, enter 742 (HK/UK) or
742#
All incoming calls that ring an
extension that doesn’t answer
Enter the appropriate Call Forwarding - No Answer Set
code:
•
•
For your extension, enter 723 (HK/UK) or 723#
For another extension, enter 743 (HK/UK) or
743#
3. If setting Call Forwarding for another extension, enter the number of the
extension whose calls you are forwarding. Otherwise, proceed to step 4.
4. Enter the destination code:
•
If you are forwarding to another extension, enter the extension number.
70
ICX (International), issued October 2000
ICX-50-750
5. Communicating Within Your Office
•
If you are forwarding to an outside number, press the # key and enter the
system speed dial code.
5. Replace the handset or press the ON/OFF key.
To set for a PDN from an NPDN or PNPDN
1. Pick up the handset or press the ON/OFF key.
2. Do one of the following:
To forward . . .
Do . . .
Press an NPDN (or PNPDN key):
All incoming calls
•
Enter 721
•
Dial the Call Forward Destination
extension number.
All incoming calls that ring a
busy extension
Press an NPDN (or PNPDN key):
•
Enter 722
•
Dial the Call Forward Destination
extension number.
All incoming calls that ring an
extension that doesn’t answer
Press an NPDN (or PNPDN key):
•
•
Enter 723
Dial the Call Forward Destination
extension number.
To cancel Call Forwarding
1. Pick up the handset or press the ON/OFF key.
2. Do one of the following:
To cancel call forwarding . . .
Do . . .
For all incoming calls
Enter the appropriate Cancel Call Forwarding - All Calls
code:
•
•
For your extension, enter 731 (HK/UK) or 731#
For another extension, enter 751 (HK/UK) or
751#
ICX-50-750
ICX (International), issued October 2000
71
5. Communicating Within Your Office
To cancel call forwarding . . .
Do . . .
For all incoming calls that ring a Enter the appropriate Cancel Call Forwarding - Busy
busy extension
code:
•
•
For your extension, enter 732 (HK/UK) or 732#
For another extension, enter 752 (HK/UK) or
752#
For all incoming calls that ring an Enter the appropriate Cancel Call Forwarding - No
extension that doesn’t answer Answer code:
•
•
For your extension, enter 733 (HK/UK) or 733#
For another extension, enter 753 (HK/UK) or
753#
3. If cancelling Call Forwarding for another extension, enter the extension number
whose Call Forwarding you are cancelling. Otherwise, proceed to step 4.
4. Replace the handset or press the ON/OFF key.
To cancel Call Forwarding and DND for your extension in one step
1. Pick up the handset or press the ON/OFF key.
2. Enter the Cancel Call Forwarding - DND code (default = 7**).
USING CAMP-ON (CALL WAITING)
Camp-on (Call Waiting) allows you to send a call waiting tone to a busy extension
indicating that they have a call waiting. You then “camp-on” or stay on the line until
the party you are trying to reach answers the call.
Note: Camp-on (Call Waiting) can be set manually or automatically. However,
automatic Camp-on (Call Waiting) requires system programming.
You can leave a text message that displays on the busy phone. Any one of the
following messages can be selected. Messages 6 to 9 and 0 have no default message
text. All the messages can be changed through system programming.
Table 6. Send Text Messages
Message No.
Message Text
Visitor Here
Need Help
Important
Message No.
Message Text
User Defined
User Defined
User Defined
1
2
3
6
7
8
72
ICX (International), issued October 2000
ICX-50-750
5. Communicating Within Your Office
Message No.
Message Text
Urgent
Message No.
Message Text
User Defined
User Defined
4
5
9
0
Emergency
The busy party can reply with a text message that displays on the camping on phone.
Any one of the following messages can be selected. Messages 6 to 9 and 0 have no
default message text. All the messages can be changed through system
programming.
Table 7. Text Message Replies
Message No.
Message Text
Message No.
Message Text
1
Take A Mes-
sage
6
User Defined
2
3
4
5
Please Hold
Will Call Back
Transfer
7
8
9
0
User Defined
User Defined
User Defined
User Defined
Unavailable
To manually camp-on to a line and notify a party that they
have a call waiting
1. Pick up the handset or press the ON/OFF key.
2. Dial the extension number.
3. After you hear a busy tone, enter the Camp-on (Call Waiting) Set code (default =
2 [HK/UK] or 2#). (The Called party hears an alert tone and you hear a ringback
tone.)
4. Stay on the line until the called party answer.
Notes:
•
•
If call waiting is accepted, the busy tone changes to a ringing tone.
You cannot send a call waiting message to an extension that has DND turned
on.
To use Automatic Camp-on (Call Waiting)
Note: Automatic Camp-on (Call Waiting) requires system programming.
ICX-50-750
ICX (International), issued October 2000
73
5. Communicating Within Your Office
1. Pick up the handset or press the ON/OFF key.
2. Dial the extension number. (The called party hears an alert tone and you hear
ringback tone.)
3. Remain on the line until the called party answers.
To leave a text message while camp-on
1. Press the MSG key.
2. Enter the send text message number (1-9, 0). (See Table 6 on page 72 for the send
text messages.)
To reply to a text message
1. Press the MSG key.
2. Enter the reply text message number (1-9, 0). (See Table 7 on page 73 for the text
message replies.)
To answer a Camp-on (Call Waiting) signal
1. Do one of the following:
To . . .
Answer a call
Do . . .
a. After receiving an alert tone, replace the handset or
press the ON/OFF key to end the first call.
b. Lift the handset or press the ON/OFF key again to
connect to the waiting call..
a. After receiving an alert tone, press the HOLD key to
Toggle between two calls (using
Broker’s Hold)
put the first call on hold.
b. Press the ON/OFF key to pick up the second call.
74
ICX (International), issued October 2000
ICX-50-750
5. Communicating Within Your Office
USING MESSAGE WAITING/CALLBACK
You can leave a callback request message (or message waiting indication) for a busy
extension or one that does not answer. After sending the callback message, you hang
up the phone and wait for the call back. The called party’s message indicator lamp
then flashes that a message has been received.
When the message indicator lamp flashes, it indicates either a callback message
from another extension or, if your system uses voice mail, a voice message. For a
callback message, the display reflects the extension or name that sent the message.
For a voice message, the display reflects that a new message has been received.
If multiple messages have been received, the display reflects the number of
messages and indicates the origin of the first message (i.e., the extension number or
voice mail).
Note: You can use the MSG key to answer callback requests.
To send a Message Waiting/Callback request
1. Pick up the handset or press the ON/OFF key.
2. Dial the extension number.
3. While the phone is still ringing or when you hear the busy tone, enter the
Message Wait code (default = 4 [HK/UK] or 4#). (The message lamp flashes at
the called extension.) (Note: You may need to dial 1 to change to tone calling
before sending the message.)
4. Replace the handset or press the ON/OFF key.
To respond to a Message Waiting/Callback request
Note: Multiple messages are accessed in the order in which they are received.
1. Pick up the handset or press the ON/OFF key.
ICX-50-750
ICX (International), issued October 2000
75
5. Communicating Within Your Office
2. Do one of the following:
To . . .
Do . . .
Answer a callback request
Enter the Message Wait/Callback Set code (default =
*6). Or, press the MSG key.
OR...
Press the Flexible Function (FF) Key assigned as a
Message Callback Key.
•
•
Phone automatically dials the extension that sent
the callback request
Message lamp goes off when the call is answered
* Cancel a Message Waiting/
Callback request
Enter the Cancel Message Waiting/Callback code
(default = *5).
* Only the person receiving a Message Waiting/Callback request can cancel the request. (The
sender of a callback request cannot cancel the request once it has been sent.)
3. Replace the handset or press the ON/OFF key.
USING DO-NOT-DISTURB
Use DND to temporarily stop calls from coming to your extension.
Note: If your phone is set for Call Forwarding-No Answer or Busy (such as to
voice mail), only calls from other extensions will be blocked. External calls will still
ring through to your extension before being forwarded to voice mail. Permanent call
forwarding is determined through system programming.
To turn DND on
1. Pick up the handset or press the ON/OFF key.
2. Do one of the following
To turn DND on . . .
For your extension
Do . . .
Enter the DND Set code (default = 720 [HK/UK] or
720#).
a. Enter the DND Set by Other Phone code (default =
For another extension
740 [HK/UK] or 740#).
b. Dial the extension number.
3. Replace the handset or press the ON/OFF key.
76
ICX (International), issued October 2000
ICX-50-750
5. Communicating Within Your Office
To cancel DND
1. Pick up the handset or press the ON/OFF key.
2. Do one of the following
To cancel DND . . .
Do . . .
For your extension
Enter the Cancel DND code (default = 720 [HK/UK] or
720#).
a. Enter the Cancel DND Set by Other Phone code
For another extension
(default = 750 [HK/UK] or 750#).
b. Dial the extension number.
3. Replace the handset or press the ON/OFF key.
USING ABSENCE MESSAGES
Absence messages appear on the display of any internal caller who calls your
extension.
To assign the Absence Message
1. Lift the handset or press the ON/OFF key
2. Enter the Absence Message code (default = 729 [UK/HK] or 729#).
3. Enter the Absence Message number. (See Table 8 on page 77)
4. If desired, enter the 4-digit returning time
5. Press HOLD key.
6. Replace the handset or press the ON/OFF key.
Note: Five absence messages (0-4) are supplied with the DBS. Messages 5 to 9
have no default message text. All the messages can be changed through system
programming.
Table 8. Absence Messages
Message No.
Message Text
In Meeting
At Lunch
Message No.
Message Text
Absence_No_5
Absence_No_5
Absence_No_5
0
1
2
5
6
7
Out of Office
ICX-50-750
ICX (International), issued October 2000
77
5. Communicating Within Your Office
3
4
Vacation
8
9
Absence_No_5
Absence_No_5
Another Office
Optionally, a return time can be input. Example Return Times for Absence
Messages include:
Input
No input
9
Display
Return
Return 9:00
Return 11:00
Return 6:15
Return 10:35
11
615
1035
To cancel the Absence Message
1. Lift the handset or press the ON/OFF key.
2. Enter the Absence Message code (default = 729 [UK/HK] or 729#).
3. Press HOLD key.
4. Replace the handset or press the ON/OFF key.
LOCKING YOUR EXTENSION
Use the Station Lockout feature to limit use of your phone by others when you are
away from your telephone. When the Station Lockout feature is in use, the Toll
Restriction Service (TRS) (Call Barring) Class of your telephone is changed.
Anyone using your telephone is limited to the calling abilities defined by this
Lockout TRS (Call Barring) Class.
In addition, with the appropriate COS, you can set or cancel Station Lockout for
other telephones.
To activate the Station Lockout feature
1. Lift the handset or press the ON/OFF key.
2. Dial the Station Lockout Set feature code (default =746 [HK/UK] or 746#).
3. Replace the handset or press the ON/OFF key.
To cancel the Station Lockout feature
78
ICX (International), issued October 2000
ICX-50-750
5. Communicating Within Your Office
1. Lift the handset or press the ON/OFF key.
2. Dial the Station Lockout Cancel feature code (default = 746 [HK/UK] or 746#).
3. Dial the Walking TRS (Call Barring)/Station Lockout security code.
4. Replace the handset or press the ON/OFF key.
To activate the Station Lockout feature for another extension
1. Lift the handset or press the ON/OFF key.
2. Dial the Station Lockout Set for Another Extension feature code (default = 747
[HK/UK] or 747#).
3. Dial the extension number to activate station lockout.
4. Replace the handset or press the ON/OFF key.
To cancel the Station Lockout feature for another extension
1. Lift the handset or press the ON/OFF key.
2. Dial the Station Lockout Cancel for Another Extension feature code (default =
748 (HK/UK) or 748#).
3. Dial the extension number to activate station lockout.
4. Dial the Walking TRS (Call Barring)/Station Lockout security code.
5. Replace the handset or press the ON/OFF key.
To change the Walking TRS/Station Lockout security code
1. Lift the handset or press the ON/OFF key.
2. Dial the Station Lockout Security Code change code (default = 749 [HK/UK] or
749#).
3. Dial the current Walking TRS (Call Barring)/Station Lockout security code.
4. Dial the new Walking TRS (Call Barring)/Station Lockout security code.
5. Replace the handset or press the ON/OFF key.
ICX-50-750
ICX (International), issued October 2000
79
5. Communicating Within Your Office
80
ICX (International), issued October 2000
ICX-50-750
6. USING ADDITIONAL FEATURES
The ICX and S-ICX provides a variety of additional features that you can use in
your daily work:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MIC or MIC Key (page 81)
Off-Hook Monitor (page 82)
Handsfree Answerback and Operation (page 82)
Voice Recognition (page 83)
Flash Feature (page 83)
Conference Calls (page 83)
Background Music (page 84)
Timed Reminders (page 85)
Caller ID (page 85)
Waking Class of Service (88)
Using Directory Numbers (page 89)
Using Zip Mode (page 92)
Room Monitoring (page 92)
Silent Monitor (page 93)
USING THE MIC KEY
You can use the MIC key on your phone or an FF key assigned as a MIC key to
mute the handset or microphone so that the party on the other end cannot hear you.
(The MIC indicator flashes when using handset mute and goes off when the
microphone is muted.)
Note: To use handset mute, you must assign an FF key as a Mute key.
To block outgoing audio using the MIC key
1. Pick up the handset or press the ON/OFF key.
2. Dial the desired number.
3. To mute your conversation:
•
Using the handset mute, press the MIC FF key.
ICX-50-750
ICX (International), issued October 2000
81
6. Using Additional Features
•
Using the microphone mute, press the MIC key.
4. To turn the mute function off:
•
•
Using the handset mute, press the MIC FF key.
Using the microphone mute, press the MIC key.
USING OFF-HOOK MONITOR
Off-Hook Monitor allows you to play a called or calling party’s voice through the
speaker on your phone, even if you are using the handset. This allows a third party
to hear both sides of a conversation.
Note: Off-Hook Monitor does not activate your phone’s microphone. The party at
the other end will hear only audio transmitted through your handset.
To put a call on speaker
1. During a handset call, press the ON/OFF key. (The other party is audible through
the speaker, but the handset is mute.)
2. Press the ON/OFF key again, to take the caller back off speaker and continue the
call through the handset.
USING HANDSFREE ANSWERBACK AND
HANDSFREE OPERATION
You can answer intercom calls as well as access all available system features
without lifting the handset.
Note: To answer intercom calls without lifting the handset, the system must be
programmed for Voice Calling. You must press 1 during a call to switch from Tone
Calling to Voice Calling. (For more information, see Using Voice Recognition
below.)
To answer calls without lifting the handset
1. When the intercom call arrives, make sure the MIC LED is on. (If it is not lit,
press the MIC key to turn it on.)
2. Speak into the microphone to answer the call.
To use system features without lifting the handset
1. Press the ON/OFF key.
82
ICX (International), issued October 2000
ICX-50-750
6. Using Additional Features
USING VOICE RECOGNITION
With the installation of additional hardware, you can use verbal commands to dial
extensions, speed dial numbers, and access various phone features.
Note: This feature requires system programming and addition hardware (VB-44224
Telephone and VM-44101 Voice Recognition Adaptor). For more information, see
your system administrator or ICX and S-ICX dealer.
USING THE FLASH FEATURE
You can send a signal to your phone to release an outside line by pressing the FL/R
key or the PROG key. Once you press either key, your phone will either reseize the
same outside line or switch to extension dial tone status.
Note: This feature requires system programming. For more information, see your
system administrator or ICX and S-ICX dealer.
MAKING CONFERENCE CALLS
You can use your phone to create conference calls that include up to three parties.
(With the installation of an optional 8-party conference card, you can include up to
eight parties.)
Notes:
•
When no optional conference card is installed, the System supports the
following types of 3-party conference calls:
•
•
•
3 extensions
2 extensions and 1 outside line
1 extension and 2 outside lines
•
When the optional 8-party conference card is installed, the System supports
any combination of conference calls, except all outside lines.
The Version 3.0 software release allows any combination of extensions and trunk
lines be in the conference as long as the original extension is in the conference and
the total number of parties does not exceed 8. With Version 3.0 software, only one
operation is used to establish and add to a conference. You simply have to place the
current call on hold, dial the next party and press the CONF key. No different
operation or access code is required to add additional parties to the call.
To establish a conference call
1. While on a call, press the HOLD key or the outside line key you are using.
2. If adding an outside party, press a vacant trunk key or dial a trunk access code.
ICX-50-750
ICX (International), issued October 2000
83
6. Using Additional Features
3. Dial the number of the party you want to add to the call.
4. Press the CONF key when your call is answered. (You are connected to the
called party.)
5. To add another party repeat steps 1-4.
6. For 3-party Conference Call Only:
To release a conference member, press PROG + 1 to release conference member
1 or press PROG + 2 to release conference member 2, etc.
Note: The conference member numbers are shown on the display.
7. To drop out of the conference call, hang up.
To establish a two party private conversation from a 3-party
conference (Version 3.5 and higher)
1. While on a call, press the CONF + 1 (2) to have a private conversation with the
CNF 1 (2) party.
2. To reestablish the conference, press CONF.
To remove a busy tone (hang up) from an 8-party conference
(Version 3.5 and higher)
1. During an conference with more than 3 parties, press CONF + (n) (where n is the
number 1-8 for the conference parties) to individually select a conference party.
2. If you did not select the conference party that is giving busy tone, re-enter the
conference by pressing CONF.
3. If you selected the conference party that is giving busy tone, hang up and then go
off-hook again and press CONF to re-enter the conference call.
To drop out of a conference call
Note: If the originating party hangs up, all conference calls will be terminated.
1. Hang up or press the FL/R key or the ON/OFF key.
CONTROLLING BACKGROUND MUSIC
If your system is set up with a music source, you can play music over the speaker of
your phone. (If Music On Hold is provided with your system, callers will
automatically hear music when you place them on hold.)
84
ICX (International), issued October 2000
ICX-50-750
6. Using Additional Features
To turn background music on or off
1. Pick up the handset or press the ON/OFF key.
2. Enter the Background Music code (default = *30).
3. Replace the handset or press the ON/OFF key.
Note: On a large-display phone, you can turn background music on or off by
pressing the BGM soft key while in the Function System menu.
USING TIMED REMINDERS
You can program your phone to act as an alarm clock and alert you at a designated
time with an audible tone.
To set a timed reminder (reminder alarm)
1. Pick up the handset or press the ON/OFF key.
2. Enter the Timed Reminder Set code (default = *31).
3. Enter the time, in 24 hour format, you want the timed reminder (alarm) to sound.
(For example, 0100 = 1:00 am, 1300 = 1:00 pm)
4. Replace the handset or press the ON/OFF key.
To cancel a timed reminder
1. Pick up the handset or press the ON/OFF key.
2. Enter the Cancel Timed Reminder code (default = *39).
3. Replace the handset or press the ON/OFF key.
USING CALLER ID
Caller ID information is displayed on the second line of an LCD display when an
incoming call is received during conversation. If a second incoming call is from
another extension, the LCD displays the extension name or number.
Caller ID Call Log
Note: This feature requires system programming or a specific ICX or S-ICX
configuration, and may not be available. For information, see your system
administrator or ICX and S-ICX dealer.
ICX-50-750
ICX (International), issued October 2000
85
6. Using Additional Features
The Call Log keeps a record of Caller ID calls that ring your phone. You can access
this log by assigning an FF key to flash when there is a new entry in the log. When
you press the key to access the log, the LED turns off.
Each Call Log entry includes the following call information:
•
•
•
•
•
Calling number
Calling name (if provided)
Time and date
How the call was answered
How the call was routed.
Call Log Operation for a Small-display Phones
You can view both the calling number information as well as the detailed
information on each entry. In addition, you can outdial the displayed number or store
the displayed number in a personal speed dial bin.
To view, dial or store the call log entry for a small-display
1. Go off-hook or press ON/OFF.
2. Dial the Call Log feature code (default = CONF 96)
The following displays:
Call Result
Time and Date
of Call
17 MAR Wed 10:34
(blank) - Answered
- Calling Party
Hung Up
01:2015553678
Calling Number
- Answered by
Someone Else
Call Log Entry Number (01 - 10)
3. Press # to move forward in the call log and press * to move back in the call log.
4. To outdial the displayed call log number,
Press the left EXEC key to outdial a leading digit (dial 9 or 0 [Taiwan, Indonesia,
Malaysia]), dial the add digits (usually 1, only in the USA), and dial the
displayed caller ID number.
OR
86
ICX (International), issued October 2000
ICX-50-750
6. Using Additional Features
Press the right EXEC key to outdial a leading digit (usually 9 [UK/HK] or 0
[Taiwan, Indonesia, or Malaysia]) and dial the displayed caller ID number.
5. To store the displayed call log number in a personal speed dial bin,
Press the PROG key, the speed dial bin number (80-90) and press the left EXEC
key to dial the add digits (usually an area code) and press the HOLD key.
OR
Press the PROG key, the speed dial bin number (80-90), press the right EXEC
key, and press the HOLD key.
6. To exit the Call Log, go on hook or press ON/OFF.
Call Log Format for the Large-Display Phone
You can view both the calling number information as well as the detailed
information on each entry. In addition, you can outdial the displayed number or store
the displayed number in a personal speed dial bin.
To view, dial or store call log entry for a large-display phone
1. Go off-hook or press ON/OFF.
2. Dial the Call Log feature code (default = CONF 96).
The following displays::
Call Log Entry Number (01 - 10)
Call Result
Time and Date
of Call
17 MAR Wed 10:34
(blank) - Answered
- Calling Party
Hung Up
01:2015553678
Calling Number
01:2015553678
02:2015554444
03:2015553456
04:4045554321
05:4045557654
- Answered by
Someone Else
3. Press # to move forward in the call log and press * to move back in the call log.
4. Press NEXT to view the next 5 calls and PREV to view the previous 5 calls.
ICX-50-750
ICX (International), issued October 2000
87
6. Using Additional Features
5. To outdial the displayed call log number,
Press the left soft key to outdial a leading digit (dial 9 [UK/HK] or 0 [Taiwan,
Indonesia, Malaysia]) dial add digits (usually 1 in the USA), and dial the
displayed caller ID number.
OR
Press the right soft key to outdial a leading digit (dial 9 [UK/HK] or 0 [Taiwan,
Indonesia, Malaysia]) and dial the displayed caller ID number.
6. To store the displayed call log number in a personal speed dial bin,
Press the PROG key, the speed dial bin number (80-90), and press the left soft
key to dial the add digits (usually an area code) and press the HOLD key.
OR
Press the PROG key, the speed dial bin number (80-90), press the right soft key
and press HOLD.
7. To exit the Call Log, go on hook or press ON/OFF.
WALKING TRS (CALL BARRING) CLASS OF SERVICE
Walking Toll Restriction Service (TRS) (Call Barring) Class of Service (COS)
allows you to use your own calling privileges at another phone. For example, you
may be allowed to make long-distance calls from your phone, but a phone in your
company’s warehouse may be restricted from long-distance calls.
To make long-distance calls from the restricted phone, you can go to that phone and
enter a Walking TRS (Call Barring) COS code before dialling the number.
Notes:
•
Before using this feature, a Walking TRS (Call Barring) COS must be
assigned for your phone by the system administrator of ICX and S-ICX dealer.
•
The same Walking TRS (Call Barring) COS code may be used by more than
one extension.
To use a Walking TRS (Call Barring) COS code
1. From an extension other than your own, pick up the handset or press the ON/
OFF key.
2. Enter the Walking TRS (Call Barring) access code (default = 87).
3. Dial your extension number.
4. Enter your Walking TRS (Call Barring) COS code.
88
ICX (International), issued October 2000
ICX-50-750
6. Using Additional Features
5. Press the # key.
6. Access an outside line.
7. Dial the phone number.
The Walking TRS (Call Barring) COS will remain in effect until you hang up.
USING DIRECTORY NUMBERS
A Directory Number (DN) allows extension numbers to be used on a key basis. The
same DN may be assigned to multiple keys on the same telephone and to keys on
other telephones.
When a telephone’s extension number is assigned to a key on the same telephone, it
is considered a Primary Directory Number (PDN). Up to three appearances of the
PDN may be assigned to keys on a key telephone. This allows for multiple calls on
the same Directory Number.
When a DN is assigned to an FF key on another telephone, it is considered a Non-
Primary Directory Number (NPDN). Up to three NPDN appearances of the same
DN may be assigned to keys on a telephone. This allows calls to the DN to appear
on multiple telephones. The calls ring in on a specified basis - immediate, delayed,
or no-ring.
A telephone may only have one PDN (on up to three keys) but may have multiple
NPDNs with up to three appearances of any one NPDN.
ICX-50-750
ICX (International), issued October 2000
89
6. Using Additional Features
Figure 19. Example Directory Number assignments for Extension 200
When a caller originates a call, the call appears on the first available PDN key. If all
PDNs are unavailable, the call will select the INT LED.
When calls come in to a DN, the call appears on the first available DN key. If the
call is to your PDN and no PDN key is available, the call appears on the INT LED.
Directory numbers may be assigned to FF keys 25-32. These are non-appearing
keys.
Intercom voice calls only go to the PDN extension but light the corresponding
NPDN keys red. A tone call follows the appropriate ring status (immediate ring,
delayed ring, etc.) for any extension.
To originate a call
1. Lift the handset or press the ON/OFF key.
2. If dialing an outside call, dial the outside line group access code (9 [UK/HK], 0
[Taiwan, Indonesia, Malaysia], or 81-84).
3. Dial the phone number or extension number.
90
ICX (International), issued October 2000
ICX-50-750
6. Using Additional Features
To receive a call to a directory number (PDN or NPDN)
1. If ringing, go off-hook or press the green blinking PDN or NPDN key.
If not ringing, press the red blinking PDN or NPDN key.
To originate a call using a non-primary directory number
1. Lift the handset or press the ON/OFF key.
2. Press the desired NPDN key.
3. If dialing an outside call, dial the outside line group access code (9, 0 [Taiwan,
Indonesia, or Malaysia], 81-84).
4. Dial the phone number or extension number.
To receive a call using a non-primary directory number
1. Lift the handset or press the ON/OFF key.
2. Press the desired NPDN key.
To call a primary directory number extension (NPDNs not
called)
1. Lift the handset or press the ON/OFF key.
2. Dial the Direct Call to PDN access code (default = 766 [HK/UK] or 766#) or
press the Direct Call to PDN key.
3. Dial the extension number.
To transfer a call to the primary directory number extension
(NPDNs not called)
1. Place the current call on hold.
2. Dial the Direct Call to PDN access code (default = 766 [HK/UK] or 766#) or
press the Direct Call to PDN key.
3. Dial the extension number.
4. If desired, wait until the PDN Extension answers and introduce the call.
5. Hang up.
ICX-50-750
ICX (International), issued October 2000
91
6. Using Additional Features
USING ZIP MODE
The Zip mode feature (CPC version 3.5 or higher) automatically answers calls when
operating a Key Telephone in headset mode.
To enter or cancel Zip mode
1. Press the ON/OFF key.
2. Press the PROG key and dial 80.
OR
Press the ZIP key.
3. Press the ON/OFF key.
ROOM MONITORING
This feature allows you to monitor the sounds in a room from another extension or
room. To activate Room Monitoring, the monitored extension mut enable the Room
Monitor feature before the monitoring extension can listen to the sounds in
the room.
4.
To set up a monitored extension
Action
Result
Dial the monitored extension
You will hear a confirmation tone after the monitored
extension has enabled the Room Monitor feature. (If the
monitored extension has an LCD display, a confirmation
message will also be shown.
access code (default = 775)
OR...
Press an FF key assigned with the
monitored access code
Placing the monitored extension back on-hook, or pressing ON/OFF or FLASH will
cancel the monitored mode.
92
ICX (International), issued October 2000
ICX-50-750
6. Using Additional Features
1.
To set up the monitoring extension
Action
Result
Dial the monitoring extension
access code (default = 776).
The monitoring extension enters the monitoring mode.
OR...
Press an FF key assigned the
monitored access code and the
extension number of the moni-
tored extension.
OR...
While the handset is on-hook,
press an FF key assigned to the
Room Monitor followed by the
monitored extension number.
The monitoring extension will automatically enter the
monitoring mode.
Placing the monitoring extension back on-hook, or pressing ON/OFF or FLASH
will cancel the monitoring mode.
SILENT MONITOR
The Silent Monitor feature allows an ACD supervisor to monitor a call between an
ACD agent and a caller without the knowledge of either party. (See CAUTION,
above.) If necessary, the ACD supervisor can initiate a three-way call by barging
into the call.
1.
To Initiate Silent Monitor
Action
Result
Press ON/OFF + 768 + Extension number you
want to monitor
OR...
The Silent Monitor feature is
active, and the extension is
being monitored. (The Silent
Monitor key flashes green when
Silent Monitor is active.)
Press the FF key assigned as a Silent Monitor
Key + Extension number you want to monitor
OR...
Press only the Silent Monitor Key if the FF key
has been preprogrammed to monitor a specific
extension number. You do not need to enter the
extension number.
Note:The Silent Monitor key is disabled when the extension assigned to that key
is idle, dialing, or ringing.
ICX-50-750
ICX (International), issued October 2000
93
6. Using Additional Features
1. Silent Monitor Key Color Definitions
FF Key Color
Definition
Possible Operation
None
Clear
Cannot monitor
Able to monitor
Not monitoring
Solid Red
Press Silent Monitor key
On-hook or CONF
Flashing Green
•
•
Only one supervisor can initiate Silent Monitor on an individual extension at
any given time.
A supervisor cannot initiate Silent Monitoring on an extension when that
extension is on a conference call.
94
ICX (International), issued October 2000
ICX-50-750
Appendix A. Dial Code List
This appendix summarizes the most commonly used dial codes. Additional features
may be programmed as described in Section 700 - Feature Operation.
The table includes the following information:
•
•
•
Function - Lists the name of the function or feature
Fixed Dial Code - This dial code is hard-coded and cannot be changed.
Flexible Dial Code - This dial code can be used as a default or it can be
customized.
•
Customised Dial Code - This dial code is customised by the system
programmer.
Notes:
•
Fixed dial codes and flexible dial codes require different procedures. Be sure
to determine which dial codes your system uses to ensure the use of the
appropriate procedure for a specific task.
•
Default dial codes use the same procedures as flexible dial codes.
Table 9. Dial Code Table
Function
Fixed Dial Code
(REDIAL + )
Flexible Dial Code
8#
Customized
Dial Code
Account Codes
Alarm Set
*57
*22
*23
*69
*24
*31
*39
Alarm Clear
Answer Key
Background Music Set/
Cancel
*30
BLF/DSS Outgoing
BLF/DSS Immediate Ring
BLF Delayed Ring
BLF/DSS No Ring
Busy Override Set
9 + extension number
81 + extension number
82 + extension number
83 + extension number
*53
Call Forward (All Calls): Set 70 + extension number 721 (HK/UK) or 721#
+ extension number
Call Forward (All Calls):
Cancel
*09
701 (HK/UK) or 701#
+ extension number
Call Forward (All Calls): Set *10
from another ext.
741 (HK/UK) or 741#
ICX-50-750
ICX (International), issued October 2000
95
Appendix A. Dial Code List
Function
Fixed Dial Code
(REDIAL + )
Flexible Dial Code
Customized
Dial Code
Call Forward (All Calls):
Cancel from another ext.
*11
751 (HK/UK) or 751#
7**
Call Forward (All/Busy/No
Answer/DND): Clear (Prior
to Ver 3.0)
*21
Call Forward (All/Busy/No
Answer/DND and Absence
Message): Clear (Ver 3.0 and
higher)
Call Forward (Busy): Set
72 + extension number 722 (HK/UK) or 722#
+ extension number
Call Forward (Busy): Cancel *15
732 (HK/UK) or 732#
+ extension number
Call Forward (Busy): Set
from another ext.
*16
742 (HK/UK) or 742#
Call Forward (Busy): Cancel *17
from an other ext.
752 (HK/UK) or 752#
Call Forward (No Answer):
Set
71 + extension number 723 (HK/UK) or 723#
+ extension number
Call Forward (No Answer):
Cancel
*12
*13
*14
733 (HK/UK) or 733#
+ extension number
Call Forward (No Answer):
Set from another ext.
743 (HK/UK) or 743#
+ extension number
Call Forward (No Answer):
Cancel from another ext.
753 (HK/UK) or 753#
+ extension number
Call Park Hold/Answer
Call Park Hold
*63
*64
*65
771
772
Call Park Answer (Own
Ext.)
Call Park Answer (0ther
Ext.)
*66
773
Call Park Transfer
*67
*31
774
Call Pickup Group (All
Calls)
701 (HK/UK) or 701#
Call Pickup Group (CO
Calls only)
*32
702 (HK/UK) or 702#
703 (HK/UK) or 703#
*0
Call Pickup Group
(designated)
*33 + (call pickup
group 1-99)
Call Pickup - Direct Trunk
Call Record Key
*34
78 + extension number
Callback at Busy Tone
Camp-on at BusyTone
*49
*50
N/A
N/A
N/A
N/A
96
ICX (International), issued October 2000
ICX-50-750
Appendix A. Dial Code List
Function
Conference Key
Fixed Dial Code
(REDIAL + )
Flexible Dial Code
Customized
Dial Code
*36
Day1/Night Toggle (Prior to *25
Ver 3.0)
760 (HK/UK) or 760#
Day 1/Day 2/Night Toggle
(Ver 3.0. and higher)
Day2
*26
761 (HK/UK) or 761#
Direct Call Pick-Up
DND: Set/Cancel
Extension Call
73 + extension number 704 (HK/UK) or 704#
*18
720 (HK/UK) or 720#
N/A
Extension number
*41
N/A
Extension Directory Name
Assignment
Recall/FL/R Key
*39
*04
Floating Hold: Answer Call
Park Pickup (Ver 3.0 and
higher)
*9
Headset Mode
*35
*30
Meet-Me Answer
##
*5
Message Waiting (Callback): *07
Cancel
Message Waiting (Callback) *08
*6
Message and Voice Mail
Key
76 + extension number
Message Waiting Set at Busy *51
Tone
Message Waiting Set at
Ringback Tone
*55
Night 1
*27
*28
762 (HK/UK) or 762#
763 (HK/UK) or 763#
Night 2 (for Built-In Voice
Mail messages)
Off-Hook Voice Announce
Paging
*70
*29 + (page group
number)
# + (zone number)
N/A
Program Key
*38
PSD Name Assignment
Release Key
*40
*68
Room Monitoring Set Key
*#05
*#06
775
776
Room Monitoring Initiate
Key
Silent Monitor Key
Speed Dial Send
77 + extension number 768
*01 80
ICX-50-750
ICX (International), issued October 2000
97
Appendix A. Dial Code List
Function
Fixed Dial Code
(REDIAL + )
Flexible Dial Code
Customized
Dial Code
Split Key
*71
System Speed Dial Name
Assignment
*42
*22
*23
Timed Reminder (alarm) -
Set
*31
Timed Reminder (alarm) -
Cancel
*39
Tone/Voice Switch
Transfer Key
*54
*37
*61
N/A
Variable Mode
Voice Mail Transfer Key 1
74 + Extension
Number
Voice Mail Transfer Key 2
75 + Extension
Number
Walking TRS Key
*72
Note: The following feature keys were added with version 3.0
Station Lockout Set (Own
Ext.)
*#01
*#02
*#03
746 (HK/UK) or 746#
747 (HK/UK) or 747#
748 (HK/UK) or 748#
749 (HK/UK) or 749#
Station Lockout Set (Other
Ext.)
Station Lockout Cancel
(Other Ext.)
Walking TRS (Call Barring)/ *#04
Station Lockout Security
Code Change
Callback Cancellatiion
Zip Mode On/Off (toggle)
Direct Call to a PDN Ext.
UNA Pickup
*58
*73
*74
*77
*78
*79
769 (HK/UK) or 769#
766 (HK/UK) or 766#
705 (HK/UK) or 705#
729 (HK/UK) or 729#
767 (HK/UK) or 767#
Absence Message Code
Network Flash during Talk
on FF-Key
PDN #1 Key
PDN #2 Key
PDN #3 Key
NPDN #1 Key
NPDN #2 Key
NPDN #3 Key
01
02
03
01 + (Ext No. 0-9999)
02 + (Ext. No. 0-9999)
03 + (Ext. No. 0-9999)
98
ICX (International), issued October 2000
ICX-50-750
Appendix A. Dial Code List
Function
Fixed Dial Code
(REDIAL + )
Flexible Dial Code
Customized
Dial Code
ACD-1 Wrap Key
ACD-21 Wrap Key
Text Message Send
*#83
*#883
*75 + (Msg Code No.
0-9)
Text Message Reply
Login Key for CTAPI
*76 + (Msg Code No.
0-9)
*#90
ICX-50-750
ICX (International), issued October 2000
99
Appendix A. Dial Code List
This page intentionally left blank.
100
ICX (International), issued October 2000
ICX-50-750
Appendix B. Customized PSD Bin Numbers
This appendix contains a table for documenting the Personal Speed Dial (PSD)
numbers that you assign to PSD bins on non-display phones. When making changes
to PSD numbers, be sure to record the change in this following table.
Table 10. Customised PSD numbers (assigned to PSD bins)
PSD Bin
Number
PSD Number
PSD Name
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
ICX-50-750
ICX (International), issued October 2000
101
Appendix B. Customized PSD Bin Numbers
This page intentionally left blank.
102
ICX (International), issued October 2000
ICX-50-750
|
