TG6511(e).book Page 1 Thursday, January 21, 2010 1:11 PM
Operating Instructions
Expandable Digital Cordless Phone
Model No. KX-TG6511
KX-TG6512
KX-TG6513
Expandable Digital Cordless Answering System
Model No. KX-TG6522
KX-TG6523
KX-TG6524
KX-TG6525
KX-TG6531
KX-TG6532
KX-TG6533
KX-TG6534
KX-TG6541
KX-TG6542
KX-TG6543
KX-TG6544
KX-TG6545
Model shown is KX-TG6511.
Before initial use, see “Getting
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save
them for future reference.
Consulte “Guía Rápida Española”, página 56.
This unit is compatible with Caller ID. You must subscribe to the appropriate
service offered by your service provider/telephone company.
customers in the U.S.A. or Puerto Rico.
TG6511(e).book Page 3 Thursday, January 21, 2010 1:11 PM
Introduction
Model composition
■ KX-TG6511 series
■ KX-TG6521/
■ KX-TG6541 series
KX-TG6531 series
L Model shown is
L Model shown is
L Model shown is
KX-TG6512.
KX-TG6522.
KX-TG6542.
Base unit
Part No.
Handset
Series
Model No.
KX-TG6511
Part No.
Quantity
KX-TG6511
series
KX-TG6511
KX-TG6511
KX-TG6511
KX-TG6531
KX-TG6531
KX-TG6531
KX-TG6531
KX-TG6531
KX-TG6531
KX-TG6531
KX-TG6531
KX-TG6541
KX-TG6541
KX-TG6541
KX-TG6541
KX-TG6541
KX-TGA652
KX-TGA652
KX-TGA652
KX-TGA653
KX-TGA653
KX-TGA653
KX-TGA653
KX-TGA652
KX-TGA652
KX-TGA652
KX-TGA652
KX-TGA652
KX-TGA652
KX-TGA652
KX-TGA652
KX-TGA652
1
2
3
2
3
4
5
1
2
3
4
1
2
3
4
5
KX-TG6512
KX-TG6513
KX-TG6522
KX-TG6523
KX-TG6524
KX-TG6525
KX-TG6531
KX-TG6532
KX-TG6533
KX-TG6534
KX-TG6541
KX-TG6542
KX-TG6543
KX-TG6544
KX-TG6545
KX-TG6521
series
KX-TG6531
series
KX-TG6541
series
3
TG6511(e).book Page 4 Thursday, January 21, 2010 1:11 PM
Introduction
Feature differences
Talking
Call with
base
unit
Intercom
Answering
system
Headset
jack
Series
Caller
ID
| ⇔ N
KX-TG6511
series
–
–
r
–
–
–
KX-TG6521
series
r
r
r
r
r
r
–
–
–
KX-TG6531
series
r
r
–
KX-TG6541
series
r
r
*1 Calls can be made or answered with the base unit.
*2 Single handset models: Intercom calls can be made between handsets by
purchasing and registering one or more optional handsets (page 6).
*3 Intercom calls can be made between the base unit and handset.
ENERGY STAR
®
As an ENERGY STAR Partner,
Panasonic has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
ENERGY STAR is a U.S. registered
mark.
Accessory information
Supplied accessories
Supplied handset qty. 1 unit
2 unit
3 unit
4 unit
5 unit
No.
Accessory item/
Order number
Accessory quantity
1
2
AC adaptor/PQLV219Y
1
1
2
1
3
1
4
1
5
1
Telephone line cord/
PQJA10075Z
4
TG6511(e).book Page 5 Thursday, January 21, 2010 1:11 PM
Introduction
*1
*2
*3
*4
*5
Supplied handset qty. 1 unit
2 unit
3 unit
4 unit
5 unit
No.
Accessory item/
Order number
Accessory quantity
3
Rechargeable batteries/
HHR-4DPA (Part No.
HHR-55AAABU or
2
4
2
6
8
10
N4DHYYY00004)
4
Handset cover
/
1
3
4
5
PNYNTGA652BR
5
6
Belt clip/PNKE1054Z1
Charger/PNLC1010ZB
1
–
2
1
3
2
4
3
5
4
*1 KX-TG6511/KX-TG6531/KX-TG6541
*2 KX-TG6512/KX-TG6522/KX-TG6532/KX-TG6542
*3 KX-TG6513/KX-TG6523/KX-TG6533/KX-TG6543
*4 KX-TG6524/KX-TG6534/KX-TG6544
*5 KX-TG6525/KX-TG6545
*6 The handset cover comes attached to the handset.
1
2
3
4
5
6
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 60).
Accessory item Order number
Rechargeable
batteries
HHR-4DPA
L To order, please call 1-800-332-5368 or visit
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
Headset
KX-TCA60, KX-TCA93, KX-TCA94, KX-TCA400, KX-TCA430
T-adaptor
KX-J66
Battery back-up
power supply
KX-TCA230
*1 Replacement batteries may have a different capacity from that of the supplied
batteries.
5
TG6511(e).book Page 6 Thursday, January 21, 2010 1:11 PM
Introduction
Expanding your phone system
Optional handset feature overview
You can expand your phone system by registering optional handsets (6 max.) to a
single base unit.
L Optional handsets may be a different color from that of the supplied handsets.
Feature
KX-TGA651
KX-TGA401
KX-TGA750
Handset
Display size
Button size
1.8 inches
1.8 inches
2.1 inches
Large
Extra large
Large
r
Display mode
–
–
–
–
Message list
r
*1 This feature allows you to select how the display shows:
– multiple items at a time
– 1 item at a time in large characters
*2 The unit displays a list of all recorded messages and allows you to select the item
to play back.
Range extender
By installing this unit, you can extend the
range of your phone system to include areas
Range extender: KX-TGA405
where reception was previously not
available. Up to 2 range extenders can be
registered to the base unit. This product can
be purchased online. Please visit our Web
site:
6
TG6511(e).book Page 7 Thursday, January 21, 2010 1:11 PM
Important Information
Operating safeguards
For your safety
L Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
L Do not disassemble the product.
L Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
WARNING
Power connection
Medical
L Use only the power source marked on the
product.
L Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of 1.92
GHz to 1.93 GHz, and the RF transmission
power is 115 mW (max.).)
L Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
L Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
L Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from the
power outlet, then wiping with a dry cloth.
Accumulated dust may cause an insulation
defect from moisture, etc. resulting in a fire.
L Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact
the Panasonic Call Center at 1-800-211-
PANA (1-800-211-7262).
L Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
L Never touch the plug with wet hands.
Danger of electric shock exists.
L Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
L Never install telephone wiring during an
electrical storm.
L Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
L Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
Installation
L To prevent the risk of fire or electrical shock,
do not expose the product to rain or any
type of moisture.
L Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
L Use caution when installing or modifying
telephone lines.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
L This product is unable to make calls when:
– the handset batteries need recharging or
have failed.
L Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
– there is a power failure.
7
TG6511(e).book Page 8 Thursday, January 21, 2010 1:11 PM
Important Information
kitchen sink, or laundry tub, in a wet
Battery
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
L We recommend using the batteries noted
Ni-MH batteries AAA (R03) size.
L Do not mix old and new batteries.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
L Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
L Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
L Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
For best performance
Base unit location/avoiding noise
L Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
L For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
Attention:
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
L Coverage and voice quality depends on the
local environmental conditions.
L If the reception for a base unit location is not
satisfactory, move the base unit to another
location for better reception.
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-822-
8837) for information on how to recycle this
battery.
Environment
Important safety
instructions
L Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
L The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
L The product should not be exposed to direct
sunlight.
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
L Do not place heavy objects on top of the
product.
8
TG6511(e).book Page 9 Thursday, January 21, 2010 1:11 PM
Important Information
L When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
L The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
L The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
L Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Specifications
■ Standard:
DECT 6.0 (Digital Enhanced
Cordless Telecommunications 6.0)
Routine care
L Wipe the outer surface of the product
with a soft moist cloth.
L Do not use benzine, thinner, or any
abrasive powder.
■ Frequency range:
1.92 GHz to 1.93 GHz
■ RF transmission power:
115 mW (max.)
■ Power source:
120 V AC, 60 Hz
■ Power consumption:
Base unit*1
:
Other information
Standby: Approx. 1.0 W
Maximum: Approx. 4.0 W
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Base unit*2
:
Standby: Approx. 1.1 W
Maximum: Approx. 4.4 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 2.6 W
Notice for product disposal, transfer, or
return
L This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
■ Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
*1 KX-TG6511/KX-TG6521/KX-TG6531
series: page 3
Note:
L Design and specifications are subject to
change without notice.
Notice
L The illustrations in these instructions may
vary slightly from the actual product.
9
TG6511(e).book Page 10 Thursday, January 21, 2010 1:11 PM
Getting Started
Battery installation
L USE ONLY Ni-MH batteries AAA
(R03) size.
Setting up
Connections
L Use only the supplied Panasonic AC
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Confirm correct polarities (S, T).
adaptor PQLV219.
■ Base unit
Press plug firmly.
“Click”
Hook
(120 V AC, 60 Hz)
Rechargeable Ni-MH ONLY
“Click”
To single-line
telephone jack
(RJ11C)
DSL/ADSL filter*
Correct
Wrong
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged,
the charge indicator goes off and
“Fully charged” is displayed.
*DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
■ Charger
Confirm “Charging” is displayed.
Charge indicator
Hooks
(120 V AC, 60 Hz)
10
TG6511(e).book Page 11 Thursday, January 21, 2010 1:11 PM
Getting Started
Battery level
Note when setting up
Icon
&
Battery level
High
Note for connections
(
Medium
Low
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
)
0)4
0
Needs charging.
Empty
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
Operating time
During a power failure
In continuous
use
13 hours max.
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 5).
Emergency power can be supplied to the
unit by connecting a Panasonic battery
back-up power supply noted on page 5.
Not in use
(standby)
11 days max.
*1 If Eco mode is on.
Note:
L Actual battery performance depends
on usage and ambient environment.
L Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
Note for battery installation
L Use the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted on page
L The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
L Wipe the battery ends (S, T) with a
dry cloth.
L Avoid touching the battery ends (S,
T) or the unit contacts.
Intelligent eco mode
Note for battery charge
This feature automatically reduces
handset power consumption by
suppressing handset transmission
power when the handset is close to the
base unit.
L It is normal for the handset to feel
warm during charging.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
L When this feature is activated, i is
displayed.
11
TG6511(e).book Page 12 Thursday, January 21, 2010 1:11 PM
Getting Started
L Eco mode is turned off when the
F Headset jack
clarity booster is activated (page 19).
(KX-TG6511/KX-TG6531/
KX-TG6541 series: page 3)
G Dial keypad ({*}: TONE)
H Receiver
Controls
I Display
J {OFF}
K {FLASH} {CALL WAIT}
L Microphone
Handset (KX-TGA652)
A
M Charge contacts
H
■ Control type
A Soft keys
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
I
B
C
B Navigator key
J
K
D
E
– {^}, {V}, {<}, or {>}: Scroll through
various lists and items.
– ? VOL. (Volume: {^} or {V}):
Adjust the receiver or speaker
volume while talking.
F
G
– {<} CID (Caller ID): View the caller
list.
– {>} REDIAL: View the redial list.
L
M
Base unit
A
A
B
B
A Charge indicator
Ringer indicator
Message indicator
B Nonslip pad
L Nonslip pad offers support when
you cradle the handset between
your shoulder and ear.
C
C Speaker
D {C} (TALK)
E {s} (SP-PHONE: Speakerphone)
A Charge contacts
12
TG6511(e).book Page 13 Thursday, January 21, 2010 1:11 PM
Getting Started
B {x} (LOCATOR)
C Bracket
CD E F G H
A
B
■ KX-TG6521/KX-TG6531 series
A
B
I J
K
L M N O P Q R
A Charge contacts
B Speaker
C D E
F
G H I
C {■} (STOP)
D {ERASE}
A Charge contacts
B Speaker
E {^}/{V} (VOL.: Volume up/down)
{7}/{8} (Repeat/Skip)
F {6} (Play)
C {ERASE}
D {■} (STOP)
E {^}/{V} (VOL.: Volume up/down)
{7}/{8} (Repeat/Skip)
F {6} (Play)
Message indicator
G {ANSWER ON}
ANSWER ON indicator
H {LOCATOR} {INTERCOM}
I Dial keypad ({*}: TONE)
J {REDIAL} {PAUSE}
K {HOLD}
L {SP-PHONE} (Speakerphone)
SP-PHONE indicator
M Microphone
Message indicator
G {LOCATOR}
H {ANSWER ON}
ANSWER ON indicator
I Bracket
N {FLASH} {CALL WAIT}
O {MUTE}
P {CONF} (Conference)
Q {MEMO}
R Bracket
*1 The base unit has an unremovable
bracket for desk or wall mounting. To
13
TG6511(e).book Page 14 Thursday, January 21, 2010 1:11 PM
Getting Started
Item
Meaning
Belt clip
$
Blocked call (page 30)
(
Clarity booster is on.
■ To attach
■ To remove
In use
Answering system is
being used by another
handset or the base
unit.
Line in
use
Someone is using the
line.
*1 KX-TG6521/KX-TG6531/KX-TG6541
series: page 3
Display
Handset display items
Initial settings
Item
w
Meaning
Symbol meaning:
Example: {V}/{^}: “Off”
Within base unit range
Out of base unit range
_
Press {V} or {^} to select the words in
quotations.
C
The line is in use.
L When flashing:
The call is put on
hold.
Display language
You can select either “English” or
“Español” as the display language.
The default setting is “English”.
L When flashing
rapidly: An incoming
call is now being
received.
1
2
3
{MENU} i {#}{1}{1}{0}
{V}/{^}: Select the desired setting.
{SAVE} i {OFF}
i
s
Eco mode is on. (page
11)
Speakerphone is on.
Voice guidance language
~
Ringer volume is off.
Available for:
KX-TG6521/KX-TG6531/KX-TG6541
&
Silent mode is on.
You can select either “English” or
“Español” as the voice guidance
language of the answering system. The
default setting is “English”.
!
Privacy mode is on.
E
m
Alarm is on. (page 29)
Handset number
Battery level
1
2
{MENU} i {#}{1}{1}{2}
&
{V}/{^}: Select the desired setting.
14
TG6511(e).book Page 15 Thursday, January 21, 2010 1:11 PM
Getting Started
3
{SAVE} i {OFF}
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1
2
3
{MENU} i {#}{1}{2}{0}
{V}/{^}: Select the desired setting.
{SAVE} i {OFF}
Date and time
1
2
{MENU} i {#}{1}{0}{1}
Enter the current month, date, and
year by selecting 2 digits for each.
Example: July 15, 2010
{0}{7} {1}{5} {1}{0}
3
4
{OK}
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
5
6
{AM/PM}: Select “AM” or “PM”.
{SAVE} i {OFF}
Note:
L When English is selected as the
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is
used.
L To correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
15
TG6511(e).book Page 16 Thursday, January 21, 2010 1:11 PM
Making/Answering Calls
Erasing a number in the redial list
Making calls
1
2
{REDIAL} or {>} REDIAL
{V}/{^}: Select the desired phone
number. i {ERASE}
Using the handset
3
4
{V}/{^}: “Yes” i {SELECT}
1
Lift the handset and dial the phone
number.
{OFF}
L To correct a digit, press {CLEAR}.
Pause (for PBX/long distance service
users)
2
3
Press {C} or {CALL}.
When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
Example: If you need to dial the line
access number “9” when making outside
calls with a PBX:
Using the speakerphone
1
Dial the phone number and press
{s}.
L Speak alternately with the other
party.
2
When you finish talking, press
{OFF}.
1
2
{9} i {PAUSE}
Dial the phone number. i {C}
Note:
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Repeat as
needed to create longer pauses.
Using the base unit
Adjusting the receiver or speaker
volume
Available for:
KX-TG6541 series (page 3)
Press {^} or {V} repeatedly while
talking.
1
2
3
{SP-PHONE}
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
Dial the phone number.
When the other party answers,
speak into the microphone.
L Speak alternately with the other
party.
1
{REDIAL} or {>} REDIAL
L If there is a new message in the
voice mail or answering system,
{REDIAL} is not displayed.
4
When you finish talking, press {SP-
PHONE}.
Note:
2
3
{V}/{^}: Select the desired phone
number.
L For best performance, use the
speakerphone in a quiet environment.
{C}
16
TG6511(e).book Page 17 Thursday, January 21, 2010 1:11 PM
Making/Answering Calls
L While on a call, you can switch from
the base unit to the handset:
– Press {C} on the handset, then
press {SP-PHONE} on the base
unit with the privacy mode off (page
19).
Note:
L You can also program the handset
ringer volume beforehand (page 25).
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing {~}.
– If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press {^} or {V} repeatedly while
talking.
Adjusting the base unit ringer
volume
Available for:
KX-TG6521/KX-TG6531/KX-TG6541
Redialing the last number dialed
{SP-PHONE} i {REDIAL}
Press {^} or {V} repeatedly to select the
desired volume.
L To turn the ringer off, press and hold
{V} until the unit beeps.
Answering calls
Note:
Using the handset
L Even when the ringer volume is set to
off, the base unit still rings for intercom
When a call is being received, the ringer
indicator flashes rapidly.
1
2
Lift the handset and press {C} or
{s} when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key
answer feature)
Using the base unit
Available for:
KX-TG6541 series (page 3)
When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
When a call is being received, the SP-
PHONE indicator flashes rapidly.
1
Press {SP-PHONE} when the unit
rings.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You
do not need to press {C}. To turn this
feature on, see page 26.
2
3
Speak into the microphone.
When you finish talking, press {SP-
PHONE}.
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the
desired volume while the handset is
ringing for an incoming call.
17
TG6511(e).book Page 18 Thursday, January 21, 2010 1:11 PM
Making/Answering Calls
Mute
Useful features during
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
a call
Hold
Handset
This feature allows you to put an outside
call on hold.
1
2
Press {MUTE} during conversation.
L {MUTE} flashes.
Handset
To return to the conversation, press
{MUTE} again.
1
Press {MENU} during an outside
call.
Note:
L {MUTE} is a soft key visible on the
handset display during a call.
2
3
{V}/{^}: “Hold” i {SELECT}
To release hold, press {C}.
L Another handset user can take
the call by pressing {C}.
L The base unit user can take the
call by pressing {SP-PHONE}.
(KX-TG6541 series: page 3)
Base unit
Available for:
KX-TG6541 series (page 3)
1
2
Press {MUTE} during conversation.
L The SP-PHONE indicator on the
base unit flashes.
Base unit
Available for:
KX-TG6541 series (page 3)
To return to the conversation, press
{MUTE} again.
1
Press {HOLD} during an outside
call.
Flash
{FLASH} allows you to use the special
features of your host PBX such as
transferring an extension call, or
2
To release hold, press {SP-
PHONE}.
L A handset user can take the call
by pressing {C}.
accessing optional telephone services.
Note:
Note for handset and base unit:
L If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound
and the ringer indicator on the
handset flashes rapidly. After 1
additional minute on hold, the call is
disconnected.
L If another phone is connected to the
the call by lifting its handset.
L While an outside call is on hold, the
SP-PHONE indicator on the base unit
flashes. (KX-TG6541 series: page 3)
18
TG6511(e).book Page 19 Thursday, January 21, 2010 1:11 PM
Making/Answering Calls
Forcall waiting or Call Waiting Call share
This feature allows you to join an
existing outside call.
Caller ID service users
To use call waiting, you must first
subscribe to call waiting from your
service provider/telephone company.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a call waiting tone.
If you subscribe to both Caller ID and
Call Waiting with Caller ID services,
the 2nd caller’s information is displayed
after you hear the call waiting tone on the
handset.
Important:
L When the privacy mode is on, you
cannot join the conversation. Turn it
off.
Handset
To join the conversation, press {C}
when the other handset is on an outside
call.
Base unit
1
Press {CALL WAIT} to answer the
2nd call.
Available for:
KX-TG6541 series (page 3)
2
To switch between calls, press
{CALL WAIT}.
To join the conversation, press {SP-
PHONE} when the handset is on an
outside call.
Note:
L Please contact your service provider/
telephone company for details and
availability of this service in your area.
Note for handset and base unit:
L A maximum of 4 parties (including 1
outside party) can join a conversation
using 3 extensions. (4-way
Temporary tone dialing (for
rotary/pulse service users)
conference)
Privacy mode
You can temporarily switch the dialing
mode to tone when you need to access
touch-tone services (for example,
answering services, telephone banking
services, etc.).
When the privacy mode is “On”, the unit
prevents other users from joining your
conversations with outside callers. To
allow other users to join your
Press {*} (TONE) before entering
access numbers which require tone
dialing.
conversations (call share), leave this
feature off. The default setting is “Off”.
1
2
3
{MENU} i {#}{1}{9}{4}
{V}/{^}: Select “On” or “Off”.
Handset clarity booster
{SAVE} i {OFF}
This feature can improve sound clarity
when the handset is used in an area
where there may be interference. During
an outside call, this feature is turned on
automatically when necessary.
L When the privacy mode is turned
on, ! is displayed during an
outside call.
L When this feature is turned on, (
is displayed.
19
TG6511(e).book Page 20 Thursday, January 21, 2010 1:11 PM
Shared Phonebook
Key
Character
{4}
G
g
H
h
I
4
4
5
5
6
6
S
s
Shared phonebook
The shared phonebook allows you to
make calls without having to dial
manually. Any handset registered to the
base unit can use the shared
phonebook. You can add 50 names and
phone numbers to the shared
phonebook, and assign each
phonebook entry to the desired group.
i
{5}
J
K
k
L
l
j
{6}
{7}
{8}
{9}
M
m
P
p
N
n
O
o
R
r
Q
q
7
7
T
t
U
u
V
v
Y
y
0
8
8
Z
z
Important:
L Only 1 person can access the shared
phonebook at a time.
W
w
X
x
9
9
L Caller ID subscribers can use group
ringer tone features (page 34).
{0}
Space
#
{#}
Adding entries
L To enter another character that is
located on the same dial key, first
press {>} to move the cursor to the
next space.
1
2
{C} i {ADD}
Enter the party’s name (16
characters max.). i {OK}
L If you do not press any dial key within
5 seconds after entering a character,
the character is fixed and the cursor
moves to the next space.
3
4
Enter the party’s phone number (24
digits max.). i {OK}
{V}/{^}: Select the desired group.
i {SELECT} 2 times
L To add other entries, repeat from
step 2.
Correcting a mistake
Press {<} or {>} to move the cursor to
the character or number you want to
erase, then press {CLEAR}. Enter the
appropriate character or number.
L Press and hold {CLEAR} to erase all
characters or numbers.
5
{OFF}
Character table for entering names
While entering characters, you can
switch between uppercase and
lowercase by pressing {*} (A→a).
Groups
Key
Character
Groups can help you find entries in the
phonebook quickly and easily. When
adding an entry to the phonebook, you
can assign it to one of 9 groups. You can
change the names of groups assigned
for phonebook entries (“Friends”,
{1}
Space
&
.
’
(
)
;
,
–
B
b
E
e
/
1
{2}
A
a
D
d
C
c
F
f
2
2
3
3
{3}
“Family”, etc.) and then search for
phonebook entries by group. The group
20
TG6511(e).book Page 21 Thursday, January 21, 2010 1:11 PM
Shared Phonebook
ringer tone feature is available for Caller
ID subscribers (page 34).
Searching by group
1
2
{C} i {GROUP}
Changing group names
The default group name is “Group 1” to
“Group 9”.
{V}/{^}: Select the group you want
to search. i {SELECT}
L If you select “All groups”, the
unit ends the group search.
1
2
3
{C} i {MENU}
{V}/{^}: “Group” i {SELECT}
3
4
{V}/{^}: Select the desired entry.
{V}/{^}: Select the desired group.
i {SELECT}
{C}
4
5
6
{V}/{^}: “Group name” i
{SELECT}
Editing entries
1
i {EDIT}
Edit the name (10 characters max.;
2
Edit the name if necessary (16
{OK}
{OFF}
Finding and calling a
phonebook entry
3
4
5
Edit the phone number if necessary
(24 digits max.). i {OK}
{V}/{^}: Select the desired group
Scrolling through all entries
1
2
3
{C}
{SELECT} i {OFF}
{V}/{^}: Select the desired entry.
{C}
Erasing entries
Searching by first character
Erasing an entry
1
2
{C}
1
2
3
Find the desired entry (page 21).
Press the dial key ({0} – {9} or {#})
which contains the character you
are searching for (page 20).
L Press the same dial key
{ERASE}
{V}/{^}: “Yes” i {SELECT} i
{OFF}
repeatedly to display the first
entry corresponding to each
character located on that dial key.
L If there is no entry corresponding
to the character you selected, the
next entry is displayed.
Erasing all entries
1
2
{C} i {MENU}
{V}/{^}: “Erase all” i
{SELECT}
3
4
5
{V}/{^}: “Yes” i {SELECT}
{V}/{^}: “Yes” i {SELECT}
{OFF}
3
4
{V}/{^}: Scroll through the
phonebook if necessary.
{C}
21
TG6511(e).book Page 22 Thursday, January 21, 2010 1:11 PM
Shared Phonebook
Chain dial
This feature allows you to dial phone
numbers in the phonebook while you are
on a call. This feature can be used, for
example, to dial a calling card access
number or bank account PIN that you
have stored in the phonebook, without
having to dial manually.
1
During an outside call, press
{MENU}.
2
{V}/{^}: “Phonebook” i
{SELECT}
3
4
{V}/{^}: Select the desired entry.
Press {CALL} to dial the number.
Note:
L When storing a calling card access
number and your PIN in the
phonebook as one phonebook entry,
press {PAUSE} to add pauses after
the number and PIN as necessary
L If you have rotary/pulse service, you
need to press {*} (TONE) before
the dialing mode temporarily to tone.
When adding entries to the
phonebook, we recommend adding
{*} (TONE) to the beginning of
phone numbers you wish to chain dial
22
TG6511(e).book Page 23 Thursday, January 21, 2010 1:11 PM
Programming
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
2
3
{MENU}
Press {V} or {^} to select the desired main menu. i {SELECT}
Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4
Press {V} or {^} to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
Main menu
Sub-menu 1
Sub-menu 2
Page
Caller list
\
–
–
Answering device
e
Play new msg.
Play all msg.
Erase all msg.
Greeting
–
38
38
39
36
36
–
–
(KX-TG6521/
KX-TG6531/
KX-TG6541 series:
Record greeting
Check greeting
Pre-recorded
Settings
Ring count
Recording time
Remote code
Screen call
Answer on
–
–
–
Answer off
V.M. access
g
–
Intercom
–
–
4
23
TG6511(e).book Page 24 Thursday, January 21, 2010 1:11 PM
Programming
Main menu
Sub-menu 1
Date and time
Alarm
Sub-menu 2
Page
15
Set date & time
e
–
–
–
29
Time
–
adjustment
Initial setting
c
Ringer setting
Ringer volume
Ringer tone
Silent mode
– On/Off
–
–
– Start/End
Set date & time Date and time
Alarm
–
Time adjustment
Handset
Talking Caller
ID
Base unit
(KX-TG6521/
KX-TG6531/
KX-TG6541 series:
Handset name
–
–
30
30
42
–
Call block
Voice mail
Store VM access#
VM tone detect
Message alert
–
Display setting LCD Contrast
Key tone
–
–
Caller ID edit
Auto talk
–
35
17
–
–
Set tel line
Set dial mode
Set flash time
Set line mode
Privacy mode
–
19
Registration
Register handset
Change language Display
Voice prompt
(KX-TG6521/
KX-TG6531/
KX-TG6541 series:
24
TG6511(e).book Page 25 Thursday, January 21, 2010 1:11 PM
Programming
Main menu
Sub-menu 1
Sub-menu 2
Page
Customer support
a
–
–
–
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
Programming using the direct commands
1
2
3
{MENU} i {#}
Enter the desired code.
Select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L In the following table, < > indicates the default settings.
Feature
Code
Setting
System
Page
Caller list
{2}{1}{3}
{3}{3}{0}
–
–
–
–
V.M. access
(V.M.: Voice mail)
Intercom
Date and time
Alarm
{2}{7}{4}
–
–
–
r
–
29
{1}{0}{1}
{7}{2}{0} {1}: Once{2}: Daily
{0}: <Off>
Time
adjustment
{2}{2}{6} {1}: <Caller ID auto>
r
–
–
–
–
{0}: Manual
Ringer volume
(Handset)
{1}{6}{0} {1}–{6}: Level 1–6 <6>
{0}: Off
Ringer tone
(Handset)
{1}{6}{1} {1}–{5}: Tone1–5
<Tone 1>
–
{6}–{0}: Melody1–5
Silent mode
(On/Off)
{2}{3}{8} {1}: On{0}: <Off>
–
–
Silent mode
{2}{3}{7} <11:00 PM/06:00 AM>
(Start/End)
Handset name
Call block
{1}{0}{4}
–
–
–
{2}{1}{7}
r
r
Block w/o num
(Block calls without
phone number)
{2}{4}{0} {1}: On{0}: <Off>
25
TG6511(e).book Page 26 Thursday, January 21, 2010 1:11 PM
Programming
*1
Feature
Code
Setting
System
Page
Store VM
{3}{3}{1}
–
r
access#
(VM: Voice mail)
VM tone detect {3}{3}{2} {1}: <On> {0}: Off
r
–
42
–
Message alert
{3}{4}{0} {1}: <On> {0}: Off
LCD Contrast
{1}{4}{5} {1}–{6}: Level 1–6 <3>
–
(Display contrast)
Key tone
{1}{6}{5} {1}: <On> {0}: Off
–
–
–
Caller ID edit {2}{1}{4} {1}: <On> {0}: Off
35
(Caller ID number
auto edit)
Auto talk
{2}{0}{0} {1}: On{0}: <Off>
–
Set dial mode
Set flash
{1}{2}{0} {1}: Pulse{2}: <Tone>
r
r
{1}{2}{1} {0}: 900 ms
{1}: <700 ms>
time
{2}: 600 ms {3}: 400 ms
{4}: 300 ms {5}: 250 ms
{*}: 200 ms{#}: 160 ms
{6}: 110 ms {7}: 100 ms
{8}: 90 ms {9}: 80 ms
Set line
mode
{1}{2}{2} {1}: A{2}: <B>
r
–
Privacy mode
{1}{9}{4} {1}: On{0}: <Off>
r
Register
handset
{1}{3}{0}
–
–
Deregistration {1}{3}{1}
–
–
–
14
Display
{1}{1}{0} {1}: <English>
(Change language)
{2}: Español
Customer
support
{6}{8}{0}
–
–
–
For the Talking Caller ID feature (KX-TG6521/KX-TG6531/KX-TG6541 series:
Feature
Code
Setting
System
Page
Talking Caller {1}{6}{2} {1}: <On> {0}: Off
–
33
ID(Handset)
Talking Caller {*}{1}
ID(Base unit) {6}{2}
{1}: On{0}: <Off>
r
26
TG6511(e).book Page 27 Thursday, January 21, 2010 1:11 PM
Programming
For the answering system (KX-TG6521/KX-TG6531/KX-TG6541 series: page 3)
Feature
Code
Setting
System
Page
Play new msg.
{3}{2}{3}
–
–
(msg.: message)
Play all msg.
{3}{2}{4}
–
–
–
–
Erase all msg. {3}{2}{5}
r
r
Record
{3}{0}{2}
greeting
Check greeting {3}{0}{3}
–
–
–
Pre-recorded
(Reset to pre-
{3}{0}{4}
r
recorded greeting)
Ring count
{2}{1}{1} 2–7 rings<4 rings>
r
r
Toll saver
Recording time {3}{0}{5} 1 min<3 min>
Greeting only
Remote code
Screen call
Answer on
{3}{0}{6} <111>
{3}{1}{0} <On> Off
{3}{2}{7}
r
–
36
–
–
r
r
r
Answer off
{3}{2}{8}
Voice prompt
{1}{1}{2} {1}: <English>
(Change language)
{2}: Español
*1 If “System” column is checked, you do not need to program the same item using
another handset.
*2 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
*3 When the ringer volume is turned off, ~ is displayed and the handset does not ring
for outside calls. However even when the ringer volume is set to off, the handset
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers.
*5 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*6 The preset melodies in this product are used with permission of © 2009
Copyrights Vision Inc.
*7 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
27
TG6511(e).book Page 28 Thursday, January 21, 2010 1:11 PM
Programming
*8 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*9 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary. The setting should stay at “700 ms” unless pressing
{FLASH} fails to pick up the waiting call.
*10Generally, the line mode setting should not be changed. This setting
automatically maintains receiver volume at the proper level depending on the
current telephone line condition. Set the line mode to “A” if telephone line
condition is not good.
*11The handset can display the Internet address where you can download the
operating instructions or get further information for this product, using your
computer.
28
TG6511(e).book Page 29 Thursday, January 21, 2010 1:11 PM
Programming
Silent mode
Special programming
Silent mode allows you to select a period
of time during which the handset will not
ring for outside calls. This feature is
useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for
each handset.
Alarm
An alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
Important:
L Set the date and time beforehand
L Set the date and time beforehand
1
2
{MENU} i {#}{7}{2}{0}
L We recommend turning the base unit
turning the silent mode on.
(KX-TG6521/KX-TG6531/
KX-TG6541 series: page 3)
L If you have set the alarm, the alarm
sounds even if the silent mode is
turned on.
{V}/{^}: Select the desired alarm
option. i {SELECT}
Off
Turns alarm off. Go to
step 7.
Once
An alarm sounds once at
the set time.
Daily
An alarm sounds daily at
the set time. Go to step
Turning silent mode on/off
1
2
{MENU} i {#}{2}{3}{8}
3
Enter the desired month and date.
i {OK}
{V}/{^}: Select “On” or “Off”. i
{SAVE}
L If you select “Off”, press {OFF}
to exit.
4
5
Set the desired time.
{AM/PM}: Select “AM” or “PM”. i
{OK}
3
4
5
Enter the desired hour and minute
you wish to start this feature.
6
{V}/{^}: Select the desired alarm
tone. i {SELECT}
L We recommend selecting a
different ringer tone from the one
used for outside calls.
{AM/PM}: Select “AM” or “PM”. i
{OK}
Enter the desired hour and minute
you wish to end this feature.
7
{SELECT} i {OFF}
L When the alarm is set, E is
displayed.
6
7
{AM/PM}: Select “AM” or “PM”.
{SAVE} i {OFF}
L When the silent mode is set, & is
displayed.
Note:
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
Note:
L To correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
L When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
29
TG6511(e).book Page 30 Thursday, January 21, 2010 1:11 PM
Programming
sends out a busy tone to the caller, and
then disconnects the call.
Changing the start and end time
1
2
{MENU} i {#}{2}{3}{7}
Important:
L When the unit receives a call from a
number that is stored in the call block
list or a call without a recognized
phone number, the call is logged in the
call is disconnected.
Changing the handset name
Each handset can be given a
customized name (“Bob”, “Kitchen”,
etc.). This is useful when you make
intercom calls between handsets. You
can also select whether or not the
handset name is displayed in standby
mode. The default setting is “Off”. If
you select “On” without entering any
handset name, “Handset 1” to
“Handset 6” is displayed.
Storing unwanted callers
You can store up to 30 phone numbers in
the call block list by using the caller list or
by entering the numbers directly.
Important:
L We recommend storing 10 digits
(including an area code). If only 7
digits are stored, all numbers that
have the same last 7 digits will be
blocked.
1
2
{MENU} i {#}{1}{0}{4}
Enter the desired name (max. 10
characters; see the character table,
■ From the caller list:
1
2
{<} CID
{V}/{^}: Select the entry to be
blocked.
3
4
{SAVE}
{V}/{^}: Select the desired setting.
i {SELECT}
L To edit the number, press
{EDIT} repeatedly until the
phone number is shown in the
10-digit format.
5
{SELECT} i {OFF}
Call block (Caller ID
subscribers only)
This feature allows the unit to reject calls
when:
3
4
{SAVE}
{V}/{^}: “Call block” i
{SELECT}
5
6
{V}/{^}: “Yes” i {SELECT}
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
Edit the phone number if
necessary (24 digits max.).
7
{SAVE} i {OFF}
■ By entering phone numbers:
– the unit receives a call without phone
1
{MENU} i {#}{2}{1}{7} i
{ADD}
2
Enter the phone number (24
digits max.).
When a call is received, the unit rings for
a short time while the caller is being
identified. If the phone number matches
an entry in the call block list, the unit
L To erase a digit, press
{CLEAR}.
3
{SAVE} i {OFF}
30
TG6511(e).book Page 31 Thursday, January 21, 2010 1:11 PM
Programming
Block calls without phone number
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
You can reject a call without phone
number including “Out of area”,
“Private caller”, or “Long
distance”.
1
2
{MENU} i {#}{2}{4}{0}
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
1
Handset:
{MENU} i {#}{1}{3}{0}
2
Base unit:
Viewing/editing/erasing call block
numbers
Press and hold {LOCATOR} for
about 5 seconds. (No registration
tone)
1
2
{MENU} i {#}{2}{1}{7}
{V}/{^}: Select the desired entry.
L To exit, press {OFF}.
■ KX-TG6521/KX-TG6531/
KX-TG6541 series: page 3
Press and hold {LOCATOR} for
about 5 seconds until the
registration tone sounds.
3
To edit a number:
{EDIT} i Edit the phone number.
i {SAVE} i {OFF}
To erase a number:
{ERASE} i {V}/{^}: “Yes” i
{SELECT} i {OFF}
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step must be completed
within 90 seconds.
Note:
L When editing, press the desired dial
key to add, {CLEAR} to erase.
L When viewing, “Block w/o num” is
displayed if the block calls without
phone number feature is turned on. To
turn the feature off: {ERASE} i {V}
i {SAVE} i {OFF}
3
Handset:
Press {OK}, then wait until a long
beep sounds.
Note:
L While registering, “Base in
registering” is displayed on all
registered handsets.
L When you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
available model.
31
TG6511(e).book Page 32 Thursday, January 21, 2010 1:11 PM
Programming
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored to the
base unit. This allows the handset to end
its wireless connection with the system.
1
{MENU} i {#}{1}{3}{1}
L All handsets registered to the
base unit are displayed.
2
{V}/{^}: Select the handset you
want to cancel. i {SELECT}
3
4
{V}/{^}: “Yes” i {SELECT}
{OFF}
32
TG6511(e).book Page 33 Thursday, January 21, 2010 1:11 PM
Caller ID Service
– Being replaced on the base unit or
charger.
Using Caller ID service
– Pressing {OFF}.
Important:
Phonebook name display
L This unit is Caller ID compatible. To
use Caller ID features, you must
subscribe to a Caller ID service.
Contact your service provider/
telephone company for details.
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in
the caller list.
Caller ID features
Talking Caller ID
When an outside call is being received,
the caller’s name and phone number are
displayed.
Caller information for the last 50 callers
is logged in the caller list from the most
recent call to the oldest.
Available for:
KX-TG6521/KX-TG6531/KX-TG6541
This feature lets you know who is calling
without looking at the display.
L If the unit cannot receive caller
information, the following is displayed: To use this feature, you must:
– “Out of area”: The caller dials
from an area which does not
provide a Caller ID service.
– “Private caller”: The caller
requests not to send caller
information.
– subscribe to a Caller ID service of
your service provider/telephone
company.
When caller information is received, the
handsets and base unit announce the
caller’s name or phone number received
from your service provider/telephone
company following every ring.
The unit announces in English only.
L Name pronunciation may vary. This
feature may not pronounce all names
correctly.
– “Long distance”: The caller
makes a long distance call.
L If the unit is connected to a PBX
system, caller information may not be
properly received. Contact your PBX
supplier.
Missed calls
L Caller ID service has a limit of how
many characters can be displayed. If
the caller’s name is too long, the
handset may not be able to display or
announce the entire name.
If a call is not answered, the unit treats it
as a missed call. The display shows
“Missed call”. This lets you know if
you should view the caller list to see who
called while you were away.
L The announcement is heard at the
same level as the ringer volume (page
Note:
L Even when there are unviewed
missed calls,“Missed call”
disappears from the standby display if
the following operation is performed
by one of the registered handsets:
L If you turn on the answering system
and set the number of rings “2
announce the caller information. If
33
TG6511(e).book Page 34 Thursday, January 21, 2010 1:11 PM
Caller ID Service
“Toll saver” is selected and there
is a new message, the unit does not
Caller list
Important:
L Only 1 person can access the caller
list at a time.
announce the caller information.
L When you receive a call while on the
phone, the 2nd caller’s name is not
announced even if you subscribe to
both Caller ID and Call Waiting with
Caller ID services.
L Make sure the unit’s date and time
setting is correct (page 15).
Phonebook name announcement
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
Viewing the caller list and
calling back
1
2
{<} CID
Press {V} to search from the most
recent call, or {^} to search from the
oldest call.
Group ringer tone for
phonebook
L If > is displayed, not all of the
information is shown. To see the
remaining information, press {>}.
To return to the previous screen,
press {<}.
This feature can help you identify who is
calling by using different ringer tones for
different groups of callers. When adding
an entry to the phonebook, you can
When a call is received from a caller
assigned to a group, the ringer you
selected for that group rings after caller
information is displayed. If you select
“Current ringer” (default), the unit
uses the ringer tone you selected on
page 25 when calls from this group are
received.
3
To call back, press {C}.
To exit, press {OFF}.
Note:
L If the entry has already been viewed
or answered, “Q” is displayed, even if
it was viewed or answered using
another handset.
Editing a caller’s phone
number before calling back
You can edit a phone number in the
caller list by removing its area code
and/or the long distance code “1”.
1
2
3
{C} i {MENU}
{V}/{^}: “Group” i {SELECT}
{V}/{^}: Select the desired group.
i {SELECT}
4
{V}/{^}: Select the current setting of
the group ringer tone. i
{SELECT}
1
2
{<} CID
{V}/{^}: Select the desired entry.
L If > is displayed, not all of the
information is shown. To see the
remaining information, press {>}.
To return to the previous screen,
press {<}.
5
6
{V}/{^}: Select the desired ringer
tone. i {SAVE}
{OFF}
34
TG6511(e).book Page 35 Thursday, January 21, 2010 1:11 PM
Caller ID Service
3
Press {EDIT} repeatedly until the
phone number is shown in the
desired format.
Note:
L Phone numbers from the 4 most
recently edited area codes are
automatically edited.
1 Local phone number
L If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
again, turn it on and reprogram the
area codes you want to edit once
again.
Example: 321-5555
2 Area code – Local phone number
Example: 555-321-5555
3 1 – Area code – Local phone
number
Example: 1-555-321-5555
Erasing selected caller
information
4
{C}
1
2
3
{<} CID
Caller ID number auto edit
feature
{V}/{^}: Select the desired entry.
Once you call back an edited number,
the handset which was used to call back
remembers the area code and format of
the edited number. The next time
someone calls from the same area code,
caller information is customized by the
handset as follows:
{ERASE} i {V}/{^}: “Yes” i
{SELECT} i {OFF}
Erasing all caller information
1
2
{<} CID
{ERASE} i {V}/{^}: “Yes” i
{SELECT} i {OFF}
– When the call is being received, the
Caller ID number is displayed in the
same format as the edited number.
– After the call has ended, the caller’s
phone number is displayed in the
same format as the edited number,
when reviewed from the caller list.
Storing caller information to
the phonebook
1
2
{<} CID
{V}/{^}: Select the desired entry.
L To edit the number, press {EDIT}
repeatedly until the phone
number is shown in the desired
format.
For example, you can use this feature to
set the handset to ignore the area code
of callers in your area, so that you can
call these local numbers using caller
information without dialing the area
code.
To activate this feature, you must edit an
entry in the caller list, then call that
number. After that, phone numbers from
that caller’s area code are edited
automatically.
3
4
{SAVE}
{V}/{^}: “Phonebook” i
{SELECT}
5
This feature can be set for each handset
35
TG6511(e).book Page 36 Thursday, January 21, 2010 1:11 PM
Answering System
greeting message asking callers to
call again later.
Answering system
– If you recorded your own greeting
message, the same message is still
announced to callers even though
their messages are not recorded.
Available for:
KX-TG6521/KX-TG6531/KX-TG6541
series (page 3)
The answering system can answer and
record calls for you when you are
unavailable to answer the phone.
You can also set the unit to play a
greeting message but not to record
caller messages by selecting
Turning the answering
system on/off
Base unit
“Greeting only” as the recording
time setting (page 41).
Press {ANSWER ON} to turn on/off the
Important:
answering system.
L Only 1 person can access the
answering system (listen to
messages, record a greeting
message, etc.) at a time.
L When callers leave messages, the
unit records the day and time of each
message. Make sure the date and
time have been set correctly (page
Handset
1
To turn on:
{MENU} i {#}{3}{2}{7}
To turn off:
{MENU} i {#}{3}{2}{8}
2
{OFF}
Note for base unit and handset:
L When the answering system is turned
on, the ANSWER ON indicator on the
base unit lights up.
Memory capacity (including
your greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages
can be recorded.
Call screening
While a caller is leaving a message, you
can listen to the call through the unit
speaker.
Note:
L If message memory becomes full:
– “Messages full” is shown on the
handset display.
Handset
To adjust the speaker volume, press {^}
or {V} repeatedly. You can answer the
call by pressing {C}. Call screening
can be set for each handset. The default
setting is “On”.
– The ANSWER ON indicator on the
base unit flashes rapidly when the
answering system is turned on.
L When the message memory becomes
full:
1
2
{MENU} i {#}{3}{1}{0}
– If you use the pre-recorded greeting
message, the unit automatically
switches to another pre-recorded
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
36
TG6511(e).book Page 37 Thursday, January 21, 2010 1:11 PM
Answering System
pre-recorded greeting asking callers
to leave a message.
Base unit
Available for:
KX-TG6541 series (page 3)
callers’ messages are not recorded
and the unit plays a different pre-
recorded greeting message asking
callers to call again.
To adjust the speaker volume, press {^}
or {V} repeatedly. You can answer the
call by pressing {SP-PHONE}.
To turn off while screening a call, press
{V} repeatedly until the sounds goes off.
Note:
Resetting to a pre-recorded greeting
message
L If you adjust the speaker volume while
listening to messages or talking on the
intercom, the speaker volume for call
screening is turned on again.
If you want to use a pre-recorded
greeting message once you record your
own greeting message, you need to
erase your own greeting message.
1
2
{MENU} i {#}{3}{0}{4}
{YES} i {OFF}
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
Playing back the greeting
message
1
2
{MENU} i {#}{3}{0}{3}
– your own greeting message
– a pre-recorded greeting message
{OFF}
Recording your greeting
message
Listening to messages
using the base unit
When new messages have been
recorded, the message indicator on the
base unit flashes.
1
2
3
{MENU} i {#}{3}{0}{2}
{V}/{^}: “Yes” i {SELECT}
After a beep sounds, hold the
handset about 20 cm (8 inches)
away and speak clearly into the
microphone (2 minutes max.).
Press {6}.
L If new messages have been recorded,
the base unit plays back new
messages.
4
5
Press {STOP} to stop recording.
{OFF}
L If there are no new messages, the
base unit plays back all messages.
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded
greeting messages:
– If you erase or do not record your own
greeting message, the unit plays a
37
TG6511(e).book Page 38 Thursday, January 21, 2010 1:11 PM
Answering System
Note:
Operating the answering
system during playback
L To switch to the receiver, press {C}.
Operating the answering
system
{MENU} i {V}/{^}: “Answering
Key
Operation
{^} or {V}
Adjust the speaker
volume
device” i {SELECT}
{7}
Repeat message
Key
Operation
{8}
Skip message
Stop playback
{^} or {V}
Adjust the
{■}
(STOP)
receiver/speaker
volume (during
playback)
{ERASE}
Erase currently playing
message
{1} or {<}
{2} or {>}
{3}
Repeat message
(during playback)
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
Skip message
(during playback)
Enter the
Erasing all messages
Press {ERASE} 2 times while the unit is
not in use.
“Settings” menu
Play new messages
Play all messages
{4}
{5}
{6}
Play greeting
message
Listening to messages
using the handset
When new messages have been
recorded:
– “New message” is displayed.
– The message indicator on the handset
flashes slowly if the message alert
feature is turned on (page 42).
{7}{6}
{8}
Record greeting
message
Turn answering
system on
{PAUSE}
Pause message
{9} or
{STOP}
Stop recording
Stop playback
{0}
Turn answering
system off
1
To listen to new messages:
{PLAY}
{*}{4}
Erase currently
or
playing message
{MENU} i {#}{3}{2}{3}
L If there are no new messages in
the answering system, {PLAY} is
not displayed.
{*}{5}
Erase all messages
{*}{6}
Reset to a pre-
recorded greeting
message
To listen to all messages:
{MENU} i {#}{3}{2}{4}
2
When finished, press {OFF}.
38
TG6511(e).book Page 39 Thursday, January 21, 2010 1:11 PM
Answering System
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
yourself or someone else (3 minutes
max.). Voice memos can be played back
later with the same operation used to
play back answering system messages.
*2 To resume playback:
{V}/{^}: “Playback” i {SELECT}
*3 You can also erase as follows:
{ERASE} i {V}/{^}: “Yes” i
{SELECT}
1
2
{MEMO}
After the unit beeps, speak clearly
about 20 cm (8 inches) away from
the microphone.
3
To stop recording, press {■}
(STOP).
Calling back (Caller ID
subscribers only)
If caller information is received for the
call, you can call the caller back while
listening to a message.
Remote operation
1
2
Press {PAUSE} during playback.
Using a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
unit’s voice guidance prompts you to
press certain dial keys to perform
different operations.
{V}/{^}: “Call back” i
{SELECT}
Editing the number before calling
back
1
2
Press {PAUSE} during playback.
{V}/{^}: “Edit & Call” i
{SELECT}
Remote access code
A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is “111”.
3
Press {EDIT} repeatedly until the
phone number is shown in the
Erasing all messages
1
2
{MENU} i {#}{3}{2}{5}
Important:
L To prevent unauthorized access to
this product, we recommend that you
regularly change the remote code.
{V}/{^}: “Yes” i {SELECT} i
{OFF}
1
2
{MENU} i {#}{3}{0}{6}
Enter the desired 3-digit remote
access code.
Voice memo
3
{SAVE} i {OFF}
Available for:
KX-TG6541 series (page 3)
Deactivating remote operation
Recording a voice memo
You can use the base unit to leave a
voice memo (voice message) for
L The entered remote access code is
deleted.
39
TG6511(e).book Page 40 Thursday, January 21, 2010 1:11 PM
Answering System
Note:
Using the answering system
remotely
L If you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit disconnects your call.
1
Dial your phone number from a
touch-tone phone.
Remote commands
2
After the greeting message starts,
enter your remote access code.
L The unit announces the number of
new messages.
You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
L The voice guidance
announcements are different
depending on the voice guidance
language setting (page 14).
Key
Operation
{1}
Repeat message
(during playback)
3
4
Follow the voice guidance prompts
as necessary or control the unit
using remote commands (page 40).
{2}
Skip message
(during playback)
{4}
{5}
{9}
Play new messages
Play all messages
When finished, hang up.
Note:
Stop playback
L You can also leave a message just as
any outside caller can. After the
greeting message starts, press {*} to
skip the greeting message and record
your message after the beep.
Start voice guidance
{0}
Turn answering system
off
{*}{4}
Erase currently playing
message
Voice guidance
{*}{5}
Erase all messages
{*}{#}
End remote operation
(or hang up)
When the English voice guidance is
selected
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
*2 For English voice guidance only
*3 For Spanish voice guidance only
During remote operation, the unit’s voice
guidance starts and prompts you to
press {1} to perform a specific
operation, or press {2} to listen to more
available operations.
Note:
Turning on the answering
system remotely
L If you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit disconnects your call.
If the answering system is off, you can
turn it on remotely.
When the Spanish voice guidance is
selected
1
2
Dial your phone number from a
touch-tone phone.
To start the voice guidance, press {9}.
The voice guidance announces the
Let the phone ring 15 times.
L A long beep is heard.
40
TG6511(e).book Page 41 Thursday, January 21, 2010 1:11 PM
Answering System
3
Enter your remote access code
within 10 seconds after the long
beep.
L To use the voice mail service provided
by your service provider/telephone
company rather than the unit’s
answering system, turn off the
answering system (page 36).
L To use this unit’s answering system
rather than the voice mail service
provided by your service provider/
telephone company, please contact
your service provider/telephone
company to deactivate your voice mail
service.
L The greeting message is played
back.
L You can either hang up, or enter
your remote access code again
and begin remote operation (page
Answering system
settings
If your service provider/telephone
company cannot do this:
– Set this unit’s “Ring count”
setting so that this unit’s answering
system answers calls before the
voice mail service of your service
provider/telephone company does.
It is necessary to check the number
of rings required to activate the
voice mail service provided by your
service provider/telephone
Number of rings before the
unit answers a call
You can change the number of times the
phone rings “Ring count” before the
unit answers calls. You can select 2 to 7
rings, or “Toll saver”.
The default setting is “4 rings”.
“Toll saver”: The unit’s answering
system answers at the end of the 2nd
ring when new messages have been
recorded, or at the end of the 5th ring
when there are no new messages. If you
call your phone from outside to listen to
there are no new messages when the
phone rings for the 3rd time. You can
then hang up without being charged for
the call.
company before changing this
setting.
– Change the number of rings of the
voice mail service so that the
answering system can answer the
call first. To do so, contact your
service provider/telephone
company.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller.
The default setting is “3 min”.
1
2
{MENU} i {#}{2}{1}{1}
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
1
2
{MENU} i {#}{3}{0}{5}
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
For voice mail service subscribers
If you subscribe to a flat-rate service
package that includes Caller ID, call
waiting, voice mail, and unlimited
local/regional/long distance calls, please
note the following:
Selecting “Greeting only”
You can select “Greeting only”
which sets the unit to announce a
greeting message to callers but not
record messages.
41
TG6511(e).book Page 42 Thursday, January 21, 2010 1:11 PM
Answering System
Note:
L When you select “Greeting only”:
– If you do not record your own
message, the unit will play the pre-
recorded greeting-only message
asking callers to call again later.
– If you use your own message,
record the greeting-only message
asking callers to call again later
Message alert
You can select whether or not the
message indicator on the handset
flashes slowly when new messages are
recorded. The default setting is “On”.
Important:
L If you stored the voice mail access
number (page 43), the message
indicator also flashes for newly
recorded voice mail messages (page
1
2
{MENU} i {#}{3}{4}{0}
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Note:
L While message alert is on, battery
42
TG6511(e).book Page 43 Thursday, January 21, 2010 1:11 PM
Voice Mail Service
16) between the access number and
the password as necessary. Contact
your service provider/telephone
Voice mail service
Voice mail is an automatic answering
service offered by your service
company for the required pause time.
provider/telephone company. After you
subscribe to this service, your service
provider/telephone company’s voice
mail system answers calls for you when
you are unavailable to answer the phone
or when your line is busy. Messages are
recorded by your service provider/
telephone company, not your telephone.
Please contact your service provider/
telephone company for details of this
service.
Example:
1-222-333-4444
PPPP
8888
VM access
number
Pauses Password
To erase the voice mail access
number
1
2
{MENU} i {#}{3}{3}{1}
Press and hold {CLEAR} until all
digits are erased. i {SAVE} i
{OFF}
Important:
L To use the voice mail service provided
by your service provider/telephone
company rather than the unit’s
answering system, turn off the
details, see page 41.
Voice mail (VM) tone detection
Your service provider/telephone
company sends special signals
(sometimes called “voice mail tones” or
“stutter tones”) to the unit to let you know
you have new voice mail messages. If
you hear a series of dial tones followed
by a continuous dial tone after you press
{C}, you have new voice mail
messages. Soon after you hang up a call
or after the phone stops ringing, your unit
checks the phone line to see if new voice
mail messages have been recorded.
Turn this feature off when:
(KX-TG6521/KX-TG6531/
L You need to store the voice mail
access number to activate the
voice mail service.
Storing the voice mail (VM)
access number
In order to listen to your voice mail
messages, you must dial your service
provider/telephone company’s voice
mail access number. Once you have
stored your voice mail access number,
you can dial it automatically (page 44).
– You do not subscribe to voice mail
service.
– Your service provider/telephone
company does not send voice mail
tones.
1
2
{MENU} i {#}{3}{3}{1}
– Your phone is connected to a PBX.
Enter your access number (24 digits
max.). i {SAVE} i {OFF}
If you are not sure which setting is
required, contact your service
provider/telephone company.
Note:
L When storing your voice mail access
number and your mailbox password,
43
TG6511(e).book Page 44 Thursday, January 21, 2010 1:11 PM
Voice Mail Service
to listen to voice mail messages, you
have to dial your access number
manually.
Turning VM tone detection on/off
The default setting is “On”.
1
2
{MENU} i {#}{3}{3}{2}
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Listening to voice mail
messages
The unit lets you know that you have
new voice mail messages in the
following ways:
– “New Voice Mail” is displayed on
the handset if message indication
service is available.
– The message indicator on the handset
flashes slowly if the message alert
feature is turned on (“Message alert”,
1
{VM}
or
{MENU} i {#}{3}{3}{0}
L The speakerphone turns on.
L If there are no new messages in
the voice mail, {VM} is not
displayed.
2
3
Follow the pre-recorded
instructions.
When finished, press {OFF}.
Note:
L If the handset still indicates there are
new messages even after you have
listened to all new messages, turn it
off by pressing and holding {#} until
the handset beeps.
L If your voice mail service uses voice
mail tones and a message is over 3
minutes long, the handset may not
indicate new messages.
L If your voice mail service uses voice
mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
44
TG6511(e).book Page 45 Thursday, January 21, 2010 1:11 PM
Intercom/Locator
2
When you finish talking, press
{INTERCOM}.
Intercom
Answering an intercom call
Intercom calls can be made:
– between handsets
Handset
– between the handset and base unit
(KX-TG6541 series: page 3)
1
2
Press {C} to answer the page.
Note:
When you finish talking, press
{OFF}.
L If you receive an outside call while
talking on the intercom, you hear 2
tones.
Base unit
– To answer the call with the handset,
press {OFF}, then press {C}.
– To answer the call with the base
unit, press {SP-PHONE} 2 times.
(KX-TG6541 series: page 3)
L When paging unit(s), the paged unit(s)
beeps for 1 minute.
Available for:
KX-TG6541 series (page 3)
1
Press {INTERCOM} to answer the
page.
2
When you finish talking, press
{INTERCOM}.
Making an intercom call
Handset
Handset locator
You can locate a misplaced handset by
paging it.
1
2
{MENU} i {INT}
{V}/{^}: Select the desired unit. i
{SELECT}
L To stop paging, press {OFF}.
1
Base unit:
{LOCATOR}
3
When you finish talking, press
{OFF}.
L All registered handsets beep for 1
minute.
2
To stop paging:
Base unit:
Base unit
Press {LOCATOR}.
Handset:
Available for:
KX-TG6541 series (page 3)
■ KX-TG6511/KX-TG6521/
KX-TG6531 series: page 3
Press {OFF}.
Press {C}, then press {OFF}.
1
Press {INTERCOM}.
When 2 or more handsets are
registered:
– To page a specific handset, enter
the handset number.
– To page all handsets, press {0} or
wait for a few seconds.
L To stop paging, press
{INTERCOM}.
45
TG6511(e).book Page 46 Thursday, January 21, 2010 1:11 PM
Intercom/Locator
– To page all handsets, press {0} or
wait for a few seconds.
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can
be made:
2
3
Wait for the paged party to answer.
L If paged party does not answer,
press {INTERCOM} to return to
the outside call.
To complete the transfer:
Press {SP-PHONE}.
– between 2 handsets
L The outside call is being routed to
the handset.
– between the handset and base unit
(KX-TG6541 series: page 3)
To establish a conference call:
Press {CONF}.
Handset
L To leave the conference, press
{SP-PHONE}. The other 2 parties
can continue the conversation.
L To put the outside call on hold,
press {HOLD}. To resume the
conference, press {CONF}.
1
2
3
During an outside call, press {INT}
to put the call on hold.
{V}/{^}: Select the desired unit. i
{SELECT}
Wait for the paged party to answer.
L If the paged party does not
answer, press {C} to return to
the outside call.
Answering a transferred call
Handset
4
To complete the transfer:
Press {OFF}.
L The outside call is being routed to
the destination unit.
Press {C} to answer the page.
Base unit
To establish a conference call:
Press {CONF}.
Available for:
KX-TG6541 series (page 3)
L To leave the conference, press
{OFF}. The other 2 parties can
continue the conversation.
L To put the outside call on hold,
press {HOLD}. To resume the
conference, press {CONF}.
Press {SP-PHONE} to answer the
page.
Base unit
Available for:
KX-TG6541 series (page 3)
1
During an outside call, press
{INTERCOM}.
When 2 or more handsets are
registered:
– To page a specific handset, enter
the handset number.
46
TG6511(e).book Page 47 Thursday, January 21, 2010 1:11 PM
Useful Information
3
Mount the unit on a wall then slide
down to secure in place.
Wall mounting
(120 V AC, 60 Hz)
1
The base unit can be mounted on a wall
by revolving the bracket to “WALL”
position (default: “DESK” stand
position).
83 mm
(31/4 inches)
or
102 mm
(4 inches)
Note:
L Make sure that the wall is strong
enough to support the weight of the
unit.
2
Wall phone plate
Base unit
83 mm
31/4 inches
102 mm
(4 inches)
(
)
1
2
1
Turn the bracket 180 degrees
counterclockwise in the “WALL”
direction until a click is heard.
Bottom
To stand on a desk
Turn the bracket 180 degrees clockwise
from the “WALL” position to the “DESK”
direction until a click is heard.
L The bracket cannot be removed.
Do not turn the bracket more than
180 degrees.
Bottom
2
Tuck in the telephone line cord (A).
Connect the AC adaptor cord and
telephone line cord (B).
B
Charger
Drive the screws (not supplied) into the
wall.
A
25.4 mm
(1 inch)
Hook
Screws
(120 V AC, 60 Hz)
47
TG6511(e).book Page 48 Thursday, January 21, 2010 1:11 PM
Useful Information
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message
Cause/solution
Base no power
L The handset has lost communication with the
base unit. Move closer to the base unit and try
again.
or
L Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset’s registration may have been
canceled. Re-register the handset (page 31).
No link. Re-connect
base AC adaptor.
Busy
L The called unit is in use.
L Other units are in use and the system is busy.
Try again later.
L The handset you are using is too far from the
base unit. Move closer and try again.
Call phone company for
your access #
L You have not stored the voice mail access
number. Store the number (page 43).
Check tel line
L The supplied telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 10).
Error!!
Invalid
L Recording was too short. Try again.
L There is no handset registered to the base
unit matching the handset number you
entered.
L The handset is not registered to the base unit.
Register the handset (page 31).
Requires subscription
to Caller ID.
L You must subscribe to a Caller ID service.
Once you receive caller information after
subscribing to a Caller ID service, this
message will not be displayed.
Use rechargeable
battery.
L A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the
rechargeable Ni-MH batteries noted on page
*1 KX-TG6521/KX-TG6531/KX-TG6541 series: page 3
48
TG6511(e).book Page 49 Thursday, January 21, 2010 1:11 PM
Useful Information
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect
the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the
batteries from the handset, and then insert the batteries into the handset again.
General use
Problem
Cause/solution
The handset does not turn L Place the handset on the base unit or charger to
on even after installing
charged batteries.
turn on the handset.
The unit does not work.
L Make sure the batteries are installed correctly
L Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset has not been registered to the base
unit. Register the handset (page 31).
I cannot hear a dial tone.
L The base unit’s AC adaptor or telephone line cord
is not connected. Check the connections.
L Disconnect the base unit from the telephone line
and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to have the
unit repaired. If the working telephone does not
operate properly, contact your service provider/
telephone company.
The indicator on the
handset flashes slowly.
L New messages have been recorded. Listen to the
new messages (page 38).
L New voice mail messages have been recorded.
*1 KX-TG6521/KX-TG6531/KX-TG6541 series: page 3
Programmable settings
Problem
Cause/solution
The display is in a
language I cannot read.
I cannot register a handset L The maximum number of handsets (6) is already
to a base unit.
registered to the base unit. Cancel unused
49
TG6511(e).book Page 50 Thursday, January 21, 2010 1:11 PM
Useful Information
Battery recharge
Problem
Cause/solution
The handset beeps and/or L Battery charge is low. Fully charge the batteries
) flashes.
I fully charged the
batteries, but
L Clean the battery ends (S, T) and the charge
contacts with a dry cloth and charge again.
– ) still flashes,
– 0 is displayed, or
– the operating time
seems to be shorter.
Making/answering calls, intercom
Problem
Cause/solution
_ is displayed.
L The handset is too far from the base unit. Move
closer.
L The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the base
unit.
L The handset is not registered to the base unit.
Noise is heard, sound cuts L You are using the handset or base unit in an area
in and out.
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
The handset does not ring. L The ringer volume is turned off. Adjust the ringer
volume (page 25).
The base unit does not
ring.
L The ringer volume is turned off. Adjust the ringer
volume (page 17).
I cannot make a call.
L The dialing mode may be set incorrectly. Change
the setting (page 15).
L The handset is too far from the base unit. Move
closer and try again.
I cannot make long
distance calls.
L Make sure that you have long distance service.
*1 KX-TG6521/KX-TG6531/KX-TG6541 series: page 3
50
TG6511(e).book Page 51 Thursday, January 21, 2010 1:11 PM
Useful Information
Caller ID/Talking Caller ID
Problem
Cause/solution
Caller information is not
displayed.
L You must subscribe to Caller ID service. Contact
your service provider/telephone company for
details.
L If your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line jack, plug the unit directly
into the wall jack.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
L The name display service may not be available in
some areas. Contact your service provider/
telephone company for details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment and
try again.
Caller information is not
announced.
L The handset or base unit’s ringer volume is turned
L The Talking Caller ID feature is turned off. Turn it
L The number of rings for the answering system is
set to “2 rings” or “Toll saver”. Select a
different setting (page 41).
L If the base unit and another handset are having an
intercom call, your handset does not announce
caller information.
Caller information is
displayed or announced
late.
L Depending on your service provider/telephone
company, the unit may display or announce the
caller’s information at the 2nd ring or later.
L Move closer to the base unit.
The caller list/incoming
phone numbers are not
edited automatically.
L The Caller ID number auto edit feature is turned
off. Turn it on and try again (page 26).
L You need to call back the edited number to
activate Caller ID number auto edit.
I cannot dial the phone
number edited in the caller
list.
L The phone number you dialed might have been
edited incorrectly (for example, the long distance
“1” or the area code is missing). Edit the phone
number with another pattern (page 34).
51
TG6511(e).book Page 52 Thursday, January 21, 2010 1:11 PM
Useful Information
Problem
Cause/solution
Time on the unit has
shifted.
L Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
The 2nd caller’s
information is not
displayed during an
outside call.
L In order to use Caller ID, call waiting, or Call
Waiting Caller ID (CWID), you must first contact
your service provider/telephone company and
subscribe to the desired service.
After subscribing, you may need to contact your
service provider/telephone company again to
activate this specific service, even if you already
subscribed to both Caller ID and Call Waiting with
Caller ID services (CWID).
*1 KX-TG6521/KX-TG6531/KX-TG6541 series: page 3
*2 KX-TG6541 series: page 3
Answering system (KX-TG6521/KX-TG6531/KX-TG6541 series: page 3)
Problem
Cause/solution
The unit does not record
new messages.
L The answering system is turned off. Turn it on
L The message memory is full. Erase unnecessary
messages (page 38).
L The recording time is set to “Greeting only”.
Change the setting (page 41).
L If you subscribe to a voice mail service, messages
are recorded by your service provider/telephone
company, not your telephone. Change the unit’s
number of rings setting or contact your service
provider/telephone company (page 41).
I cannot operate the
answering system.
L Someone is using the unit. Wait for the other user
to finish.
L A caller is leaving a message. Wait for the caller to
finish.
L The handset is too far from the base unit. Move
closer.
52
TG6511(e).book Page 53 Thursday, January 21, 2010 1:11 PM
Useful Information
Problem
Cause/solution
I cannot operate the
answering system
remotely.
L The remote access code is not set. Set the remote
L You are entering the wrong remote access code. If
you have forgotten your remote access code,
enter the remote access code setting to check
your current code (page 39).
L Press each key firmly.
L The answering system is turned off. Turn it on
Liquid damage
Problem
Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
L Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least 3
days. After the handset/base unit are completely
dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before
use. If the unit does not work properly, contact an
authorized service center.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
53
TG6511(e).book Page 54 Thursday, January 21, 2010 1:11 PM
Useful Information
FCC and other information
This equipment complies with Part 68 of the
FCC rules and the requirements adopted by
the ACTA. On the bottom of this equipment
is a label that contains, among other
information, a product identifier in the
format US:ACJ----------.
The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the
telephone company will provide advance
notice in order for you to make necessary
modifications to maintain uninterrupted
service.
If requested, this number must be provided
to the telephone company.
L Registration No.............(found on the
bottom of the unit)
If trouble is experienced with this
L Ringer Equivalence No. (REN).......0.1B
equipment, for repair or warranty
information, please contact a Factory
Service Center or other Authorized Servicer.
If the equipment is causing harm to the
telephone network, the telephone company
may request that you disconnect the
equipment until the problem is resolved.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular plug
is provided with the product. It is designed
to be connected to a compatible modular
jack that is also compliant.
Connection to party line service is subject to
state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
The REN is used to determine the number
of devices that may be connected to a
telephone line. Excessive RENs on a
telephone line may result in the devices not
ringing in response to an incoming call. In
most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain
of the number of devices that may be
connected to a line, as determined by the
total RENs, contact the local telephone
company. For products approved after July
23, 2001, the REN for the product is part of
the product identifier that has the format
US:AAAEQ##TXXXX. The digits
If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this equipment
does not disable your alarm equipment. If
you have questions about what will disable
alarm equipment, consult your telephone
company or a qualified installer.
This equipment is hearing aid compatible as
defined by the FCC in 47 CFR Section
68.316.
When you hold the phone to your ear, noise
might be heard in your Hearing Aid. Some
Hearing Aids are not adequately shielded
from external RF (radio frequency) energy. If
noise occurs, use an optional headset
accessory or the speakerphone option (if
applicable) when using this phone. Consult
with your audiologist or Hearing Aid
manufacturer about the availability of
Hearing Aids which provide adequate
shielding to RF energy commonly emitted
by digital devices.
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the
telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice isn't practical, the
telephone company will notify the customer
as soon as possible. Also, you will be
advised of your right to file a complaint with
the FCC if you believe it is necessary.
54
TG6511(e).book Page 55 Thursday, January 21, 2010 1:11 PM
Useful Information
WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to
the dispatcher the reason for the call.
2) Perform such activities in the off-peak
hours, such as early morning or late
evenings.
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
cordless telephone should not be placed
near or on top of a TV or VCR. If
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
interference is experienced, move the
cordless telephone further away from the TV
or VCR. This will often reduce, or eliminate,
interference.
FCC RF Exposure Warning:
L This product complies with FCC radiation
exposure limits set forth for an
Privacy of communications may not be
ensured when using this phone.
uncontrolled environment.
L To comply with FCC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8 inches)
or more between the product and all
person’s body (excluding extremities of
hands, wrist and feet).
L This product may not be collocated or
operated in conjunction with any other
antenna or transmitter.
CAUTION:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate this device.
NOTE:
L The handset may be carried and operated
with only the specific provided belt-clip.
Other non-tested belt-clips or similar
body-worn accessories may not comply
and must be avoided.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
Notice
L FCC ID can be found inside the battery
compartment or on the bottom of the
units.
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving
antenna.
Compliance with TIA-1083 standard:
Telephone handsets identified with this logo
have reduced noise and interference when
used with T-Coil equipped hearing aids and
cochlear implants.
Compatible with
Hearing Aid T-Coil
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
T
TIA-1083
55
TG6511(e).book Page 56 Thursday, January 21, 2010 1:11 PM
Guía Rápida Española
Guía Rápida Española
Instalación
Unidad base
L
Use solo el adaptador de corriente Panasonic PQLV219 incluido.
“Clic”
Oprima firmemente
el contacto.
Gancho
(120 V CA, 60 Hz)
Correcto
Incorrecto
“Clic”
A la toma de
teléfono de línea
única (RJ11C)
Filtro DSL/ADSL*
*Requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Auricular
CARGUE
APROXIMADAMENTE
DURANTE 7 HORAS
L
L
L
UTILICE SOLO baterías de Ni-MH tamaño AAA
(R03).
NO utilice baterías Alcalinas, de Manganeso o de
Ni-Cd.
Compruebe que las polaridades son las correctas
(S, T).
Confirme que
aparezca
“Cargando”.
SOLO baterías Ni-MH recargables
Cargador
(120 V CA, 60 Hz)
L
Use solo el adaptador de
corriente Panasonic
PQLV219 incluido.
56
TG6511(e).book Page 57 Thursday, January 21, 2010 1:11 PM
Guía Rápida Española
Sugerencias de operación
Teclas de función
El auricular incluye 3 teclas de función. Al oprimir una tecla
de función, puede seleccionar la función que aparece
directamente encima de ella en la pantalla.
{
C}
,
{
MENU
}
,
{REMR.} y otras funciones adicionales se
asignan a las teclas de función. Preste atención a la
pantalla para ver qué funciones están asignadas a las
teclas de función durante la operación del auricular.
Tecla navegadora
Subir volumen
{^}
-
-
-
-
{^}
elementos.
VOL. (Volumen: {^}
receptor o el altavoz mientras habla.
CID (identificador de llamadas): Vea la lista de
personas que llamaron.
REDIAL (remarcación): Vea la lista de remarcación.
,
{V}
,
{
<
}
, o
{>}: Navegue por diversas listas y
{<}
{>}
?
o
{V}): Ajuste el volumen del
{
<}
{V}
Bajar volumen
{
>}
Cambio de idiomas (Auricular) (predeterminado: inglés)
Idioma de la pantalla
{
MENU
Idioma de la guía de voz
Disponible para las series KX-TG6521/KX-TG6531/KX-TG6541
MENU }{ }{ }{ {V} {^} Español GUARDA
}
i
{
#
}{
1
}{
1
}{
0
}
i
{V}
/
{^}
:
“
Español
”
i
{
GUARDA
}
i
{
OFF
}
{
}
i
{
#
1
1
2}
i
/
:
“
”
i
{
}
i
{
OFF
}
Fecha y hora (Auricular)
1
2
3
4
{
MENU
Introduzca el día, mes y año actuales.
Introduzca la hora y minuto actuales (formato de reloj de 24 horas).
GUARDA OFF
}
i
{#}{1}{0}{1}
i
{OK}
{
}
i
{
}
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para hacer llamadas
Para contestar llamadas
Para colgar
Marque el número telefónico.
{C} {s}
OFF
Oprima {^} {V} repetidamente mientras habla.
i
{C}
/
{s}
/
{
}
Para ajustar el volumen del
receptor o del altavoz
o
Cómo hacer una llamada
usando la lista de
remarcación
{
REMR.
}
o
{
>
}
REDIAL
i
{C}
{V}/{^}: Seleccione el número
telefónico deseado.
i
57
TG6511(e).book Page 58 Thursday, January 21, 2010 1:11 PM
Guía Rápida Española
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para ajustar el volumen del
timbre del auricular
1
2
{
MENU
{V} {^}: Seleccione el volumen deseado.
OFF
}
i
{#}{1}{6}{0}
/
i{GUARDA}i
{
}
Cómo hacer y contestar llamadas (Unidad base): serie KX-TG6541
Para hacer llamadas
Para contestar llamadas
Para colgar
{
{
{
SP-PHONE
SP-PHONE
SP-PHONE
}
}
}
i
Marque el número telefónico.
Para ajustar el volumen del
altavoz
Oprima {^}
o
{V} repetidamente mientras habla.
REDIAL
{V} repetidamente para seleccionar el volumen
Remarcación del último
número marcado
{
SP-PHONE
}
i
{
}
Para ajustar el volumen del
timbre de la unidad base
Oprima {^}
deseado.
o
Directorio telefónico compartido (Auricular)
Para añadir entradas
1
2
{
C
}
i
{
AÑAD.
Introduzca el nombre de la persona (máx. 16 caracteres).
OK
Introduzca el número telefónico de la persona (máx. 24
dígitos). OK
{V} {^}: Seleccione el grupo deseado.
SELEC. 2 veces OFF
{V} {^}: Seleccione la entrada deseada. {C}
}
i
{
}
3
4
i
{
}
/
i
{
}
i
{
}
Para hacer llamadas
{
C
}
i
/
i
Sistema contestador de llamadas (Unidad base): series KX-TG6521/KX-TG6531/
KX-TG6541
Contestador encendido/
apagado
Oprima
de llamadas.
{ANSWER ON} para encender y apagar el contestador
Para escuchar mensajes
{6}
Sistema contestador de llamadas (Auricular): series KX-TG6521/KX-TG6531/KX-TG6541
Para escuchar mensajes Para escuchar mensajes nuevos:
REPRO. MENU }{ }{ }{
Para escuchar todos los mensajes:
MENU }{ }{ }{
{
}
o
{
}
i
{
#
3
2
3}
{
}
i
{
#
3
2
4}
Preguntas frecuentes
Pregunta
Causa y solución
¿Por qué aparece
_
?
L
El auricular está demasiado lejos de la unidad base.
Acérquelo.
58
TG6511(e).book Page 59 Thursday, January 21, 2010 1:11 PM
Guía Rápida Española
Preguntas frecuentes
Pregunta
Causa y solución
¿Por qué aparece
_?
L
El adaptador para corriente de la unidad base no está
conectado correctamente. Conecte de nuevo el adaptador
para corriente a la unidad base.
L
El auricular no está registrado en la unidad base. Regístrelo.
1
2
Auricular:
Unidad base:
Serie KX-TG6511
Oprima y mantenga oprimido
aproximadamente 5 segundos. (No hay tono de registro)
Series KX-TG6521/KX-TG6531/KX-TG6541
Oprima y mantenga oprimido LOCATOR durante
{
MENU
}
i
{#}{1}{3}{0}
N
{
LOCATOR} durante
N
{
}
aproximadamente 5 segundos hasta que suene el tono de
registro.
3
Auricular: Oprima
emita un pitido largo.
{OK}, y después espere a que se
¿Cómo se incrementa el
nivel de volumen del
auricular?
L
Oprima la tecla de navegación {^} repetidamente mientras
habla.
¿Por qué hay ruido o se
corta la conversación?
L
L
Trate de reubicar la unidad base de forma que se minimice la
distancia al auricular.
Si ocurre el mismo problema aunque el auricular se
encuentre enseguida de la unidad base, llame a soporte al
cliente de Panasonic al 1-800-211-PANA (1-800-211-7262).
¿Es posible añadir otro
auricular accesorio a mi
unidad base?
L
L
Sí, puede añadir hasta 6 auriculares (incluyendo los que se
venden con su unidad base) a una sola unidad base.
Para adquirir auriculares accesorios adicionales
(KX-TGA401/KX-TGA651/KX-TGA750), visite
o llame al 1-800-332-5368. Los usuarios TTY (usuarios con
impedimentos auditivos o del habla) pueden llamar al 1-866-
605-1277.
¿Es posible mantener
cargando las baterías todo el
tiempo?
L
L
Puede dejar el auricular en la unidad base o el cargador en
cualquier momento. Esto no daña las baterías.
¿Cómo se contestan las
llamadas en espera
(segunda llamada)?
Oprima
espera.
{CALL WAIT} cuando escuche el tono de llamada en
Para obtener más información acerca del registro, visite
http://www.panasonic.com/RegisterYourHandset (solo en inglés)
59
TG6511(e).book Page 60 Thursday, January 21, 2010 1:11 PM
Appendix
Customer services
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at: 1-800-211-PANA (1-800-211-7262),
Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST.
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and
Personal Checks.)
TTY users (hearing or speech impaired users) can call 1-866-605-1277.
60
TG6511(e).book Page 61 Thursday, January 21, 2010 1:11 PM
Appendix
Warranty (For United States and Puerto Rico)
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Telephone Products
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Corporation of North America (referred to as “the
warrantor”) will, for the length of the period indicated on the chart below, which
starts with the date of original purchase (“Limited Warranty period”), at its
option either (a) repair your product with new or refurbished parts, or
(b) replace it with a new or a refurbished product. The decision to repair or
replace will be made by the warrantor.
Parts
One (1) Year
Labor
One (1) Year
During the “Labor” Limited Warranty period there will be no charge for labor.
During the “Parts” Limited Warranty period, there will be no charge for parts.
You must mail-in your product prepaid during the Limited Warranty period. This
Limited Warranty excludes both parts and labor for batteries, antennas, and
cosmetic parts (cabinet). This Limited Warranty only applies to products
purchased and serviced in the United States or Puerto Rico. This Limited
Warranty is extended only to the original purchaser and only covers products
purchased as new.
Ship-In Service
For assistance in the continental United States and Puerto Rico in obtaining
repairs please ship the product prepaid to:
PSTC (Panasonic) Exchange Center,
4900 George McVay Drive, Suite B Door #12, McAllen, TX 78503
When shipping the unit carefully pack in a padded shipping carton, include all
accessories, and send it prepaid. Include a letter detailing the complaint, a
return address and provide a day time phone number where you can be
reached. P.O. Boxes are not acceptable. Keep the tracking number for your
records. A copy of valid registered receipt is required under the 1 year parts
and labor Limited Warranty.
For Limited Warranty service for headsets if a headset is included with this
product please follow instructions above.
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,
AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH
PROOF OF PURCHASE.
61
TG6511(e).book Page 62 Thursday, January 21, 2010 1:11 PM
Appendix
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The Limited Warranty ALSO DOES NOT COVER damages which
occurred in shipment, or failures which are caused by products not supplied by
the warrantor, or failures which result from accidents, misuse, abuse, neglect,
bug infestation, mishandling, misapplication, alteration, faulty installation, set-
up adjustments, misadjustment of consumer controls, improper maintenance,
power line surge, lightning damage, modification, introduction of sand, humidity
or liquids, commercial use such as hotel, office, restaurant, or other business or
rental use of the product, or service by anyone other than a Factory Service
Center or other Authorized Servicer, or damage that is attributable to acts of
God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY. (As examples, this excludes damages for lost
time, lost calls or messages, cost of having someone remove or re-install an
installed unit if applicable, travel to and from the servicer. The items listed are
not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY,
ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts,
so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have
other rights which vary from state to state. If a problem with this product
develops during or after the Limited Warranty period, you may contact your
dealer or Service Center. If the problem is not handled to your satisfaction, then
write to the warrantor’s Consumer Affairs Department at the addresses listed
for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
When you ship the product
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom.
L Send the unit to PSTC (Panasonic) Exchange Center, prepaid and
adequately insured.
L Do not send your unit to Panasonic Corporation of North America
listed on the back cover or to executive or regional sales offices. These
locations do not repair consumer products.
62
TG6511(e).book Page 63 Thursday, January 21, 2010 1:11 PM
Index
Error messages: 48
F
Index
G
H
#
4-way conference: 19
Handset
A
Additional handset: 31
Alarm: 29
Deregistration: 32
Locator: 45
Name: 30
Registration: 31
Hold: 18
Answering calls: 17
Answering system
Call screening: 36
Greeting message: 37
Greeting only: 41
I
Intercom: 45
Key tone: 26
Line mode: 26
K
L
M
MEMO: 39
Making calls: 16
Missed calls: 33
Mute: 18
Number of rings: 41
Recording time: 41
Remote access code: 39
Remote operation: 39
Ring count: 41
Auto talk: 17
P
R
Pause: 16
Phonebook: 20
Power failure: 11
Privacy mode: 19
Redialing: 16
Rotary/pulse service: 19
B
C
Belt clip: 14
Booster (Clarity booster): 19
S
T
Silent mode: 29
SP-PHONE (Speakerphone): 16
Call block: 30
Time adjustment: 25
Transferring calls: 46
Troubleshooting: 49
TTY: 60
Caller ID number auto edit: 35
Caller ID service: 33
Caller list: 34
Caller list edit: 34
Call share: 19
Call waiting: 19
Call Waiting Caller ID: 19
Chain dial: 22
V
VM (Voice mail): 43
Voice guidance language: 14
Volume
CID (Caller ID): 34
Conference calls: 46
Control type: 12
Receiver: 16
Ringer (Base unit): 17
Speaker: 16
Customer support: 26
D
E
Date and time: 15
Dialing mode: 15
Direct commands: 25
Display
Contrast: 26
Language: 14
W
Wall mounting: 47
Eco mode: 11
63
TG6511(e).book Page 64 Thursday, January 21, 2010 1:11 PM
IMPORTANT!
If your product is not working properly. . .
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the Operating Instructions.
L
FAQ and troubleshooting hints are available.
For your future reference
We recommend keeping a record of the following information to assist with any repair
under warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
One Panasonic Way, Secaucus, New Jersey 07094
Copyright:
This material is copyrighted by Panasonic System Networks Co., Ltd., and may be
reproduced for internal use only. All other reproduction, in whole or in part, is
prohibited without the written consent of Panasonic System Networks Co., Ltd.
© Panasonic System Networks Co., Ltd. 2009
Printed in Malaysia
PNQX2397YA CM1209DW2010
|