Operating Instructions
Link-to-Cell Cellular Convergence Solution
Model No. KX-TG7841
KX-TG7842
KX-TG7843
KX-TG7844
KX-TG7845
KX-TG365SK
KX-TG7871
KX-TG7872
KX-TG7873
KX-TG7874
KX-TG7875
KX-TG385SK
Model shown is KX-TG7841.
Before initial use, see “Getting Started”
on page 10.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte “Guía Rápida Española”, página 80.
in the U.S.A. or Puerto Rico.
Introduction
Model composition
Base unit
Handset
Series
Model No.
Part No.
Part No.
Quantity
*1
KX-TG7841
series
KX-TG7841
KX-TG7841
KX-TG7841
KX-TG7841
KX-TG7841
KX-TG7841
KX-TG7871
KX-TG7871
KX-TG7871
KX-TG7871
KX-TG7871
KX-TG7871
KX-TGA680
KX-TGA680
KX-TGA680
KX-TGA680
KX-TGA680
KX-TGA680
KX-TGA680
KX-TGA680
KX-TGA680
KX-TGA680
KX-TGA680
KX-TGA680
1
2
3
4
5
5
1
2
3
4
5
5
KX-TG7841
KX-TG7843
KX-TG7844
KX-TG7845
KX-TG365SK
*1
KX-TG7871
KX-TG7871
*2
series
KX-TG7873
KX-TG7874
KX-TG7875
KX-TG385SK
*1 Single handset models: Intercom calls can be made between handsets by purchasing and
registering one or more optional handsets (page 5).
– USB charging (USB jack is on the left side of the base unit)
– Text message alert feature
Accessory information
Supplied accessories
*1
*2
*3
*4
*5
Supplied handset qty.
1 unit
2 units
3 units
4 units
5 units
No.
Accessory item/
Order number
Accessory quantity
*6
A
B
1
1
1
1
1
1
1
1
1
1
AC adaptor
PQJA10075Z
C
D
E
Desk stand/Wall mounting
adaptor /PNKL1038Z1
1
2
1
1
4
2
1
6
3
1
8
4
1
10
5
*7
HHR-4DPA
*8
Handset cover
/
3
Introduction
*1
*2
*3
*4
*5
Supplied handset qty.
1 unit
2 units
3 units
4 units
5 units
No.
Accessory item/
Order number
Accessory quantity
F
G
Belt clip/PNKE1268Z1
Charger/PNLC1040ZB
1
–
2
1
3
2
3
3
3
4
*1 KX-TG7841/KX-TG7871
*2 KX-TG7842/KX-TG7872
*3 KX-TG7843/KX-TG7873
*4 KX-TG7844/KX-TG7874
*5 KX-TG7845/KX-TG7875/KX-TG365SK/KX-TG385SK
*6 PNLV226Z: KX-TG7841/KX-TG7842/KX-TG7843/KX-TG7844/KX-TG7845/KX-TG365SK
PNLV234Z: KX-TG7871/KX-TG7872/KX-TG7873/KX-TG7874/KX-TG7875/KX-TG385SK
*7 The desk stand/wall mounting adaptor comes attached to the base unit.
*8 The handset cover comes attached to the handset.
A
E
B
C
D
PNLV226
PNLV234
F
G
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 90).
Accessory item
Order number
*1
Rechargeable
batteries
HHR-4DPA
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
Headset
KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430
KX-J66
T-adaptor
*2
Range extender
Key detector
KX-TGA405
*3
KX-TGA20
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
4
Introduction
*2 By installing this unit, you can extend the range of your phone system to include areas
where reception was previously not available. This product can be purchased online. Please
*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and
attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to
which the key detector is attached. Please visit our Web site:
Expanding your phone system
Handset (optional): KX-TGA680
You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.
R Optional handsets may be a different color
from that of the supplied handsets.
®
Bluetooth devices
You can expand your phone system by pairing the following units to a single base unit.
*1
Your Bluetooth cellular phone : 2 max.
(for cellular calls: page 17)
*1
Your Bluetooth headset : 1 max.
*1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For
more details and the list of compatible cellular phones, please visit our Web site:
Trademarks
®
R The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by Panasonic Corporation is under license. All other trademarks identified herein
are the property of their respective owners.
5
Important Information
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact
the Panasonic Call Center at
1-800-211-PANA (1-800-211-7262).
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
CAUTION
Installation and location
R Never touch the plug with wet hands.
Danger of electric shock exists.
R Never install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R This product is unable to make calls when:
6
Important Information
– the handset batteries need recharging or
have failed.
– there is a power failure.
Important safety
instructions
Battery
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
R We recommend using the batteries noted
on page 4. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
For best performance
Base unit location/avoiding noise
Attention:
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to
recycle this battery.
R Coverage and voice quality depends on the
local environmental conditions.
7
Important Information
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Notice for product disposal, transfer,
or return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
Notice
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
R Wipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
ENERGY STAR (for KX-TG7841 series)
®
As an ENERGY STAR Partner, Panasonic
has determined that this product meets the
ENERGY STAR guidelines for energy
efficiency. ENERGY STAR is a U.S.
registered mark.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
8
Important Information
Specifications
R Standard:
DECT 6.0 (Digital Enhanced
Cordless Telecommunications 6.0)
Bluetooth wireless technology 2.0
R Frequency range:
1.92 GHz to 1.93 GHz (DECT)
2.402 GHz to 2.48 GHz (Bluetooth)
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
*1
Base unit:
Maximum: Approx. 4.5 W
*2
Base unit:
Maximum: Approx. 8.5 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W
*2
R USB Charger:
Output current: 500 mA
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
*1 KX-TG7841 series: page 3
Note:
R Design and specifications are subject to
change without notice.
R The illustrations in these instructions may
vary slightly from the actual product.
9
Getting Started
n Base unit (KX-TG7871 series: page 3)
adaptor PNLV234.
R The hook of the base unit is not designed to
hold the AC adaptor cord for the desk stand
or wall mounting use (page 67).
Setting up
Connections
R If you do not connect the telephone line
cord and use only cellular lines, set the
cellular line only mode to use this unit more
conveniently (page 19).
“Click”
“Click”
adaptor PNLV226.
To single-line
telephone jack
(RJ11C)
Press plug firmly.
“Click”
DSL/ADSL filter*
To power outlet
Hook
“Click”
“Click”
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
To single-line
telephone jack
n Charger
(RJ11C)
DSL/ADSL filter*
To power outlet
To power outlet
Incorrect
Correct
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
10
Getting Started
Note when setting up
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
size.
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
,
).
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 7.
Rechargeable Ni-MH ONLY
,
) with a dry
cloth.
R Avoid touching the battery ends (
,
)
or the unit contacts.
Note for battery charging
R It is normal for the handset to feel warm
during charging.
R When the date and time setting is
displayed, see page 16.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged,
“Fully charged” is displayed.
Confirm “Charging” is displayed.
Battery level
Icon
Battery level
High
Medium
Low
Needs charging.
Empty
11
Getting Started
Panasonic Ni-MH battery
Controls
performance (supplied batteries)
Operation
Operating time
Handset
*1
In continuous use
Not in use (standby)
10 hours max.
*1
8 days max.
G
H
*1 If eco mode is on.
Note:
R Actual battery performance depends on
usage and ambient environment.
R Even after the batteries are fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
A
R The battery level may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and let it charge for at least
7 hours.
B
C
I
D
Intelligent eco mode
J
K
E
F
This feature automatically reduces handset
power consumption by suppressing handset
transmission power when the handset is close
to the base unit.
L
R When this feature is activated,
is
displayed. However, during a cellular call,
is not displayed even though this
feature is activated.
A
B
A
R Eco mode is turned off when the clarity
booster is activated (page 23).
Speaker
M
N (TALK)
Headset jack
Dial keypad (*: TONE)
MZN (SP-PHONE: Speakerphone)
Microphone
Receiver
Display
MOFFN
MFLASHNMCALL WAITN
12
Getting Started
MNOISE REDUCTIONN
USB jack
Charge contacts
(KX-TG7871 series: page 3)
Charge contacts
Speaker
n Control type
Soft keys
The handset features 2 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display. After a cellular phone is paired,
MCELLN is displayed.
Display
MHOLDN
MREDIALN MPAUSEN
MFLASHN MCALL WAITN
MZN (SP-PHONE: Speakerphone)
SP-PHONE indicator
MERASEN
Navigator key
–
–
MDN, MCN, MFN, or MEN: Scroll through
various lists and items.
(Volume: MDN or MCN): Adjust the
receiver or speaker volume while talking.
MANSWER ON/OFFN
ANSWER ON/OFF indicator
MLOCATORN MINTERCOMN
–
–
–
MFN
: View the phonebook entry.
MEN REDIAL: View the redial list.
MCN CID (Caller ID): View the caller list.
MnN (STOP) (EXIT)
Base unit
M
N (PLAY)
Message indicator
MCELL 1N
I
J
E
F
G
CELL 1 indicator
K
L
MCELL 2N
CELL 2 indicator
M
H
Desk stand/Wall mounting adaptor
A
B
R The adaptor is a removable
attachment for desk stand or wall
mounting use (page 67).
B
C
D
Microphone
Dial keypad (*: TONE)
n Control type
N
O
Soft keys
The base unit features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
Navigator key
–
MDN, MCN, M
N, or M
N: Scroll through
various lists and items.
– VOL. (Volume: MDN or MCN): Adjust the
speaker volume while talking.
R
P
–
M
N/M
N: Repeat/skip messages
during playback.
A
13
Getting Started
Item
Meaning
Charging the cellular phone by
USB
Out of base unit range
The landline is in use.
R When flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
Available for:
KX-TG7871 series (page 3)
the cellular phone and the base unit, you can
charge a cellular phone. However, the cellular
phone cannot exchange data with the base
unit through a USB cable.
A cellular line is in use.
R When flashing:
The cellular call is put on
hold.
R When flashing rapidly:
A cellular call is being
received.
1
A cellular phone is
connected. Ready to make/
*1
R When turned off:
A cellular phone is not
connected to the base
unit. (page 19)
selected for the ringer
setting.
– A cellular call is being
received on that line.
*2
Eco mode is on. (page 12)
Belt clip
(page 24)
n To attach
n To remove
Equalizer is set. (page 24)
Z
Speakerphone is on.
(page 21)
*3
Ringer volume is off.
(page 22, 38)
(page 45)
Call sharing mode is off.
(page 41)
Alarm is on. (page 44)
Handset number
Display/Indicators
Handset display items
Battery level
Item
Meaning
Blocked call (page 45)
Within base unit range
14
Getting Started
Item
Meaning
Item
Meaning
*2
“Greeting only” is
selected as the caller’s
recording time. In this case,
the answering system
answers calls with a greeting
message and caller
Clarity booster is on.
(page 23)
In use
Answering system is being
used by another handset or
the base unit.
Cell1 in
use
Someone is using the
cellular line.
messages are not recorded.
(page 62)
Cell2 in
use
A Bluetooth headset is
connected to the base unit.
Ready to use it.
Line in
use
Someone is using the
landline.
A Bluetooth headset is in use.
*1 Corresponding cellular line(s) is(are)
indicated next to the item.
*2 During a cellular call, the item is not
displayed even though the feature is
activated.
*3 Corresponding lines (1, 2: cellular line, L:
landline) are indicated next to the item. If
all lines are turned off, no line is indicated.
*1 Corresponding lines (1, 2: cellular line, L:
landline) are indicated next to the item. If
all lines are turned off, no line is indicated.
CELL 1/CELL 2 indicators on the
base unit
The CELL 1/CELL 2 indicators show each
cellular line status.
Base unit display items
Status
Meaning
Item
Meaning
On
A cellular phone is connected.
Ready to make/receive
cellular calls.
*1
Ringer volume is off.
(page 29, 42)
Flashing
– The cellular line is in use.
– Phonebook entries are
being copied from a
cellular phone (page 52).
for the paired cellular
phone.
(page 45)
Call sharing mode is off.
(page 41)
In use
Answering system is being
used by a handset.
– The base unit is pairing a
cellular phone.
– A cellular call is put on hold.
Cell1 in
use
Someone is using the
cellular line.
Cell2 in
use
Flashing
rapidly
A cellular call is being
received.
Line in
use
Someone is using the
landline.
Light off
– A cellular phone is not
paired to the base unit.
– A cellular phone is not
connected to the base unit
(page 19).
15
Getting Started
Display language
You can select either “English” or
“Español” as the display language. The
default setting is “English”.
Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing MMENUN, #, and then the
corresponding code on the dial keypad
(page 36).
n Symbol meaning:
Example: MbN: “Off”
Handset / Base unit
1
2
MMENUN#110
MbN: Select the desired setting. a
MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Press MCN or MDN to select the words in
quotations.
Base unit: MEXITN
Date and time
Voice guidance language
Important:
You can select either “English” or
“Español” as the voice guidance language
of the answering system. The default setting is
“English”.
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press MSELECTN, then
proceed to step 2.
Handset
Handset
1
2
3
MMENUN#112
1
2
MMENUN#101
MbN: Select the desired setting.
MSAVEN a MOFFN
Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 15, 2013
07 15 13
Dialing mode
3
4
MOKN
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
Handset
5
6
*: Select “AM” or “PM”.
MSAVEN a MOFFN
1
2
3
MMENUN#120
Note:
MbN: Select the desired setting.
MSAVEN a MOFFN
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
16
Link to Cell
R After the CELL 1 or CELL 2 indicator
on the base unit starts flashing, the
rest of the procedure must be
completed within 5 minutes.
Your cellular phone:
While the CELL 1 or CELL 2 indicator is
flashing, follow the instructions of your
cellular phone to enter the pairing mode.
R Depending on your cellular phone, it
may ask you to enter the base unit PIN
(default: “0000”).
Link to cell feature
To use this feature, you must first pair and
connect your cellular phones to the base unit
(page 17).
Your cellular phones must have Bluetooth
wireless technology that is compatible with this
product.
2
3
This feature allows you to:
– make or answer cellular calls using your
home phone (handset or base unit) with
better reception.
– maximize the benefits of cellular services
(such as free night and weekend calls, or
cellular to cellular call plans) by utilizing
unused peak minutes with your home
phone.
– conserve the battery power of your cellular
phone while the unit is on a cellular call.
(We recommend charging your cellular
phone during the cellular call as your
cellular phone battery is being consumed.)
Handset:
Wait until a long beep sounds.
R It may take more than 10 seconds to
complete pairing.
R When the CELL 1 or CELL 2 indicator
lights up, the cellular phone is
connected to the base unit. You are
ready to make cellular calls.
4
MOFFN
Note:
R Make sure that your cellular phone is set to
connect to this product automatically. Refer
to your cellular phone’s operating
instructions.
R Make sure you cancel your cellular phone’s
current pairing if you want to pair it to the
other line (page 17).
alert feature is “On”, so when you pair your
cellular phone to the base unit, this feature
may be activated (page 53). (This
phone you are using.)
Important:
R You may pair a maximum of 2 cellular
phones and 1 headset. However, the base
unit allows only one Bluetooth to be active
at a time.
R Locate your cellular phone near the base
unit. If the cellular phone is too close to the
base unit during a cellular call, you may
hear noise. For best performance, we
recommend placing the cellular phone
between 0.6 m to 3 m (2 feet to 10 feet)
away from the base unit.
Unpairing a cellular phone
You can cancel the pairing of a cellular phone
that is stored in the base unit.
Pairing a cellular phone
Important:
R For more details and the list of compatible
cellular phones, please visit our Web site:
R Before pairing a Bluetooth enabled cellular
phone to the base unit, make sure that no
other Bluetooth device such as a Bluetooth
headset is connected to your cellular phone.
Handset
1
2
For CELL 1: MMENUN#6111
For CELL 2: MMENUN#6112
MbN: “Yes” a MSELECTN
R When the cellular phone is unpaired,
the CELL 1 or CELL 2 indicator is
turned off.
1
Handset:
For CELL 1: MMENUN#6241
For CELL 2: MMENUN#6242
3
MOFFN
17
Link to Cell
– “On (without Talking CID)”: The
handset and base unit use your cellular
phone’s ringer tone. Caller information is
not announced even if the Talking Caller ID
is turned on.
Link to cell settings
Selecting which unit receives
cellular calls
Important:
R To use this feature, your cellular phone
must support Bluetooth in-band ringtone.
Refer to your cellular phone’s operating
instructions.
You can select which unit rings and receives
calls for a cellular line. When “All” is
selected, all handsets and the base unit ring.
Handset
Handset
1
2
3
For CELL 1: MMENUN#6271
For CELL 2: MMENUN#6272
1
For CELL 1: MMENUN#6141
For CELL 2: MMENUN#6142
MbN: Select the desired handset or “All”.
a MSAVEN
2
3
MbN: Select the desired setting.
MSAVEN a MOFFN
MOFFN
Note:
Note:
R The units use the preset ringer tones
(page 39) instead of your cellular phone’s
ringer tone when a cellular call is being
received if:
– your cellular phone is in silent mode
(depending on your cellular phone).
– the base unit is in use.
– 2 handsets are sharing a landline call.
R If your cellular phone is in silent mode with
“On (with Talking CID)” set, the unit
announces caller information even when
Talking Caller ID is turned off (page 40).
R When you select a specific handset to
receive calls for a cellular line:
– other handsets cannot answer the calls.
– the base unit can answer the calls even
though it does not ring. However, you
can make the base unit ring by adjusting
the base unit ringer volume (page 38).
base unit ringer volume also returns to the
lowest level even if the ringer volume has
been changed.
R The units selected with this setting have the
text message alert feature (page 53)
page 3)
To use the handset ringer tone
instead of your cellular phone’s
ringer tone
Ring as cell mode
Once this feature is turned on, the handset
and base unit ring using the same ringer tone
as your cellular phone.
Select “Off” in step 2, “Ring as cell mode”,
page 18.
To change the handset ringer tone for a
cellular line, see page 38.
The following settings are available:
– “Off”: Turn this feature off to use the
ringer tones of the handset and base unit.
Caller information is announced depending
on the Talking Caller ID setting (page 40).
The handset and base unit use your cellular
phone’s ringer tone. Caller information is
announced even if the Talking Caller ID is
turned off.
Auto connection to the cellular
phone
After pairing, your cellular phone is connected
to the base unit. If you move the cellular
phone out of base unit range, the cellular
phone is disconnected from the base unit.
This feature allows the base unit to try to
reconnect the cellular phone at regular
18
Link to Cell
intervals when it returns within base unit
range. You can set the interval. The default
setting is “1 min”.
Handset
To connect/disconnect:
For CELL 1: MMENUN#6251
For CELL 2: MMENUN#6252
R A long beep sounds.
1
2
Important:
R When you are using a cellular line or a
Bluetooth headset, the base unit loses its
connection from other Bluetooth devices
(cellular phone or headset). To
MOFFN
automatically resume the connection to
cellular phones, leave the auto connection
on.
R Some cellular phones lose connection after
usage, please check the specifications of
your cellular phone for more details.
Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
Important:
Handset
R If you turn on the “Cell line only
mode”, disconnect the telephone line cord
from the base unit. Otherwise the “Cell
line only mode” cannot be activated.
1
2
3
MMENUN#632
MbN: Select the desired setting.
MSAVEN a MOFFN
Handset
Note:
1
2
MMENUN#157
R Some cellular phones may ask you if you
accept the connection requirement from the
base unit. In that case, select “Off” in step
2. Check the specifications of your cellular
phone.
To turn on:
MbN: “On” a MSELECTN a
MbN: “Yes” a MSELECTN
To turn off:
MbN: “Off” a MSELECTN
Connecting/disconnecting the
cellular phone manually
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
– for the handset, press M
instead of MCELLN (page 21).
the line button (MCELL 1N or MCELL 2N)
set for the cellular line selection
(page 20, 28).
If you will not be using the paired cellular
phone’s link to cell feature temporarily (for
example, you do not want the unit to ring
when your cellular line receives a call), you
can disconnect your cellular phone from the
base unit. If you want to use it again,
N or MZN
reconnect the cellular phone to the base unit.
features cannot be used:
Note:
R Even if a paired cellular phone was
disconnected from the base unit, if it is
brought within the base unit’s range during
the auto connection interval, it may
automatically connect to the base unit
(page 18).
“Unpair” from the base unit, so pairing it
to the base unit again is unnecessary.
– Landline features (page 43)
– Voice mail features (page 63)
unit reboots.
– Bluetooth connections from cellular
phones or headset are disconnected. If
the auto connection is turned on
(page 18), the cellular phones are
reconnected.
19
Link to Cell
7-digit phone number when making cellular
calls.
–
will be displayed on the handset
momentarily. The handset can be used
once is displayed.
Handset
1
2
MMENUN#633
When you use the landline again
Enter the 3-digit area code.
R To correct a digit, press MCLEARN.
Before connecting the telephone line to the
base unit, select “Off” in step 2, “Cellular line
3
MSAVEN a MOFFN
Changing the Bluetooth PIN
(Personal Identification Number)
Cellular line selection
This feature determines which cellular line is
selected to make cellular calls when:
– you press MCELLN on the handset.
The PIN is used to pair cellular phones to the
base unit. The default PIN is “0000”. To
prevent unauthorized access to this product,
we recommend that you change the PIN, and
keep it confidential.
– you press M
N or MZN on the handset
while the cellular line only mode is turned
on.
Important:
– you press MZN on the base unit while the
cellular line only mode is turned on.
The following settings are available:
– “Manual” (handset only: default): You can
select the desired cellular line when making
a call.
R Please make note of your new PIN. The
unit does not reveal the PIN to you. If you
forget your PIN, see page 75.
Handset
– “Cellular phone 1” (base unit default): CELL
1 is selected.
– “Cellular phone 2”: CELL 2 is selected.
1
MMENUN#619
R If the unit prompts you to enter the old
PIN (when the default has been
changed), enter the current 4-digit PIN.
Handset
2
3
Enter the new 4-digit PIN. a MOKN
1
For handset: MMENUN#634
For base unit: MMENUN#*634
Enter the new 4-digit PIN again. a
MSAVEN
2
3
MbN: Select the desired setting.
4
MOFFN
MSAVEN a MOFFN
Base unit
1
2
3
MMENUN#634
MbN: Select the desired setting.
MSAVEN a MEXITN
Storing your area code (for
dialing only a 7-digit phone
number to make a local call)
You need to add your area code when making
cellular calls to a phone number in your area.
Once you store your area code, it is
automatically added to the beginning of the
20
Making/Answering Calls Using the Handset
Erasing a number in the redial list
Making cellular calls
n When a cellular phone is paired:
Important:
1
2
MEN REDIAL
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that the CELL
1 or CELL 2 indicator lights up (page 15).
MbN: Select the desired phone number.
a MMENUN
3
4
5
MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN
MOFFN
1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
MCELLN
n When a cellular phone is not paired:
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
1
2
MEN REDIAL
MbN: Select the desired phone number.
a MERASEN
Go to step 4.
3
4
MbN: “Yes” a MSELECTN
3
4
MSELECTN
MOFFN
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Making landline calls
Note:
1
Lift the handset and dial the phone
number.
R To switch to the speaker, press MZN.
To switch back to the receiver, press MZN/
M
R To correct a digit, press MCLEARN.
N.
2
3
M
N
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Using the speakerphone
Making a cellular call using the redial
list
1
Dial the phone number and press MZN.
R Speak alternately with the other party.
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
2
Note:
When you finish talking, press MOFFN.
1
2
3
MEN REDIAL
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press MZN/
MbN: Select the desired phone number.
MCELLN
M
N.
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
4
MSELECTN
1
2
MEN REDIAL
MbN: Select the desired phone number.
21
Making/Answering Calls Using the Handset
3
M
N
2
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Storing a number to the phonebook
Phone numbers of up to 24 digits can be
stored in the phonebook.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You do
n When a cellular phone is paired:
1
2
MEN REDIAL
not need to press M
N. To turn this feature
MbN: Select the desired phone number.
a MMENUN
on, see page 41.
3
4
MbN: “Save” a MSELECTN
Adjusting the handset ringer volume
To store the name, continue from step
3, “Editing entries”, page 34.
n While the handset is ringing for an
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
1
2
MEN REDIAL
n Programming the volume beforehand:
MbN: Select the desired phone number.
a MSAVEN
1
To change the cellular line ringer
volume:
3
To store the name, continue from step
3, “Editing entries”, page 34.
For CELL 1: MMENUN#6281
For CELL 2: MMENUN#6282
To change the landline ringer
volume:
Pause (for PBX/long distance service
users)
MMENUN#160
2
3
MbN: Select the desired volume. a
MSAVEN
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 34).
number “9” when making outside calls with a
PBX:
MOFFN
Temporary ringer off
While the unit is ringing for a call, you can turn
the ringer off temporarily by pressing M N.
1
2
9 a MDN (Pause)
Dial the phone number. a M
N
Useful features during a
call
Note:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.
Hold
This feature allows you to put an outside call
on hold.
Answering calls
1
2
3
Press MMENUN during an outside call.
1
Lift the handset and press M
when the unit rings.
R To answer a cellular call, you can also
press MCELLN.
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
N or MZN
MbN: “Hold” a MSELECTN
To release hold on the cellular line:
Press MCELLN.
R Another handset user can take the call:
*1
MCELLN a MSELECTN
22
Making/Answering Calls Using the Handset
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
pressing MCELL 1N or MCELL 2N.
To release hold on the landline:
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed after you hear
the call waiting tone on the handset.
Press M
R Another handset user can take the call
by pressing M N.
N.
R The base unit user can take the call by
pressing MZN.
Note:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call is
disconnected.
R If another phone is connected to the same
line, you can also take the landline call by
lifting its handset.
1
Press MCALL WAITN to answer the 2nd
call.
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Mute
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
1
Press MMUTEN during conversation.
R MMUTEN flashes.
2
To return to the conversation, press
MMUTEN again.
You can temporarily switch the dialing mode
to tone when you need to access touch-tone
services (for example, answering services,
telephone banking services, etc.).
Press * (TONE) before entering access
numbers which require tone dialing.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Flash for landline calls
Handset clarity booster
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
Note:
R To change the flash time, see page 41.
R When this feature is turned on,
is
displayed. However, during a cellular call,
is not displayed even though the
feature is activated.
23
Making/Answering Calls Using the Handset
– a specific line is set to make
cellular calls (page 20).
Handset noise reduction
This feature allows you to hear the voice of
the person you are talking to clearly, by
reducing the surrounding noise coming from
the other party’s telephone.
Press MNOISE REDUCTIONN to turn on/off
while talking.
2
a MSELECTN
n While another unit is on a landline call:
To join the conversation, press M N.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 41).
Note:
R When this feature is turned on,
displayed while talking.
R Depending on the environment where this
handset is being used, this feature may not
be effective.
is
R This feature is not available using the
speakerphone.
R When both the “Equalizer” setting and
Transferring a cellular call
between the handset and a
cellular phone
noise reduction are activated,
shown on the display.
is
Transferring a cellular call from the
handset to a cellular phone
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1
2
Press MMENUN during a cellular call.
MbN: “Transfer to cell” a
MSELECTN
R The cellular call is transferred to the
cellular phone.
1
2
3
4
Press MMENUN while talking.
MbN: “Equalizer” a MSELECTN
MbN: Select the desired setting.
Press MOKN to exit.
Note:
R Depending on your cellular phone type, you
may need to set the cellular phone to be
ready to talk before transferring. For
example, if your cellular phone has a top
cover, open it beforehand.
Note:
R When this feature is activated,
is
displayed while talking.
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
Transferring a cellular call from a
cellular phone to the handset
During a conversation using a cellular phone,
the call cannot be transferred to the handset
by the cellular phone. Perform the following
with the handset.
1
During a conversation using a cellular
phone, press MCELLN.
R The call is transferred to the handset
when:
Call share
You can join an existing outside call.
n While another unit is on a cellular call:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
1
To join the conversation, press
MCELLN.
R You can join the conversation when:
– only 1 cellular phone is paired.
24
Making/Answering Calls Using the Handset
2
MbN: Select the desired cellular phone. a
MSELECTN
R The call is transferred to the handset.
4
To hang up the 2nd call and return to the
1st call (cellular call), press MOFFN, then
press MCELLN.
Using the other line during a
conversation
You can handle a cellular call and a landline
call at the same time. When another call is
being received during a conversation, the
interrupt tone sounds (page 39), and the 2nd
Power back-up operation
for landline
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power back-up mode). This allows
you to make and receive landline calls using a
handset during a power failure. The base unit
will not perform any other functions. However,
some functions such as Caller ID and shared
phonebook are available only when using a
handset other than the handset supplying
power to the base unit. You can program
“Power failure” and the default setting is
“Auto” (page 41).
subscribe to Caller ID (page 48). You can
Making/answering a cellular call
during a conversation on the landline
1
2
3
Press MMENUN during a landline call.
MbN: “Hold” a MSELECTN
To make a 2nd call:
Important:
R If a handset is not placed on the base unit
when a power failure occurs, “Base no
power Press OFF” is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power back-up mode.
R Power back-up mode will not work if the
battery level of the power supplying
*1
Dial the phone number. a MCELLN
a
MSELECTN
*1 The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
handset is
or
.
To answer a 2nd call:
MCELLN
R To hold the 2nd call: MMENUN a MbN:
“Hold” a MSELECTN
R Do not lift the power supplying handset
from the base unit during power back-up
mode.
R Do not touch the handset’s charge contacts
during power back-up mode.
R If the battery level is low, the unit will not
work sufficiently during power back-up
mode. In addition, in case handset battery
power runs out, we recommend connecting
a corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 4).
4
To hang up the 2nd call and return to the
1st call (landline call), press MOFFN, then
press M
N.
Making/answering a landline call
duringa conversationon a cellularline
1
2
3
Press MMENUN during a cellular call.
MbN: “Hold” a MSELECTN
To make a 2nd call:
Dial the phone number. a M
N
To answer a 2nd call:
M
N
R To hold the 2nd call: MMENUN a MbN:
“Hold” a MSELECTN
25
Making/Answering Calls Using the Handset
may be disconnected if you touch the
Panasonic Ni-MH battery
performance (supplied batteries)
during power back-up mode
handset. In such case, try to call back.
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
When the batteries are fully charged,
operating time of the handset in power
back-up mode varies depending on usage.
– Continuous use of the handset in power
back-up mode: 1.5 hours max.
– Continuous use of the handset other than a
handset in power back-up mode: 2 hours
max.
Making a call using the redial list
n When only 1 handset is registered:
1
2
3
4
Lift the handset.
MEN REDIAL
MbN: Select the desired phone number.
– Not in use in power back-up mode: 2 hours
max.
Within 1 minute, place the handset on
the base unit.
Note:
R Wait until speakerphone is turned
on automatically and the call is
made.
R Actual battery performance depends on
usage and ambient environment.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls. For the
operation, please see “Making a call using
the redial list”, page 21.
Making calls during a power
failure
n When only 1 handset is registered:
1
Lift the handset and dial the phone
number.
2
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
Making a call using the shared
phonebook
There must be at least 2 handsets
registered to the base unit in order for the
shared phonebook feature to be used
during a power failure.
You should leave one handset on the base
unit for supplying the power, and use another
handset for making calls.
3
When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
4
When you finish talking, press MOFFN.
For the operation, please see “Finding and
Note:
R In step 2, if you do not place the handset on
back-up mode turns off. In this case, press
MOFFN on the handset and dial the phone
number. Then try again from step 2.
Answering calls during a power
failure
n When only 1 handset is registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls. For the
operation, please see “Making landline
calls”, page 21.
1
When the unit rings, keep the handset
on the base unit and press M
N or
MZN.
R Speakerphone is turned on.
2
When you finish talking, press MOFFN.
R During a call with the handset placed on the
base unit (power back-up mode), the call
26
Making/Answering Calls Using the Handset
n When 2 or more handsets are registered:
When the unit rings, use a handset which is
not supplying power to the base unit. For
the operation, please see “Answering calls”,
page 22.
placed on the base unit during power
back-up mode.
Note:
R During a call with the handset placed on the
base unit (power back-up mode), the call
may be disconnected if you touch the
handset. In such case, try to call back.
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
27
Making/Answering Calls Using the Base Unit
4
When you finish talking, press MZN.
Note:
Making cellular calls
R While on a call, you can switch from the
base unit to the handset:
1
2
3
Dial the phone number.
Press MCELL 1N or MCELL 2N.
– Press M
N on the handset, then press
MZN on the base unit with the call
sharing mode on (page 30).
lift it.
When the other party answers, speak into
the microphone.
R Speak alternately with the other party.
4
When you finish talking, press MZN.
Note:
Making a call using the redial list
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
With the call sharing mode on (page 30),
Select the desired cellular phone. a
MSELECTN a Press MZN on the base unit.
– When only 1 cellular phone is paired or
the line is set to make cellular calls
(page 20), press MCELLN on the
unit.
The last 10 phone numbers dialed are stored
in the redial list (each 48 digits max.).
1
2
3
MREDIALN
MbN: Select the desired phone number.
MZN
Erasing a number in the redial list
1
2
MREDIALN
MbN: Select the desired phone number.
a MERASEN
If the handset is on the base unit, simply lift
it.
3
4
MbN: “Yes” a MSELECTN
MEXITN
Adjusting the speaker volume
Pause (for PBX/long distance service
users)
Press MDN or MCN repeatedly while talking.
Making a cellular call using the redial
list
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 34).
The last 10 phone numbers dialed are stored
in the redial list (each 48 digits max.).
1
2
3
MREDIALN
number “9” when making outside calls with a
PBX:
MbN: Select the desired phone number.
Press MCELL 1N or MCELL 2N.
1
2
9 a MPAUSEN
Dial the phone number. a MZN
Note:
Making landline calls
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
1
2
3
Dial the phone number.
MZN
When the other party answers, speak into
the microphone.
28
Making/Answering Calls Using the Base Unit
– a specific line is set to make
cellular calls (page 20).
Answering calls
Press MZN.
R A handset user can take the call by
When a landline call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received, the
CELL 1 or CELL 2 indicator and SP-PHONE
indicator flash rapidly.
pressing M
N.
Note:
R While a landline call is on hold, the
SP-PHONE indicator flashes.
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call is
disconnected.
R If another phone is connected to the same
line, you can also take the landline call by
lifting its handset.
1
Press MZN when the unit rings.
R You can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
2
3
Speak into the microphone.
When you finish talking, press MZN.
Adjusting the base unit ringer volume
n While the base unit is ringing for an
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
Mute
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
n Programming the volume beforehand:
1
To change the cellular line ringer
volume:
1
Press MMUTEN during conversation.
R The SP-PHONE indicator on the base
unit flashes.
For CELL 1: MMENUN#6281
For CELL 2: MMENUN#6282
To change the landline ringer
volume:
2
To return to the conversation, press
MMUTEN again.
MMENUN#160
2
3
MbN: Select the desired volume.
Flash for landline calls
MSAVEN a MEXITN
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Useful features during a
call
Note:
R To change the flash time, see page 41.
Hold
For call waiting or Call Waiting
Caller ID service users
This feature allows you to put an outside call
on hold.
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
1
2
Press MHOLDN during an outside call.
To release hold on the cellular line:
Press MCELL 1N or MCELL 2N.
R A handset user can take the call:
*1
MCELLN a MSELECTN
– only 1 cellular phone is paired.
29
Making/Answering Calls Using the Base Unit
If you subscribe to both Caller ID and Call
Transferring a cellular call
between the base unit and a
cellular phone
Waiting with Caller ID services, the 2nd
caller’s information is displayed after you hear
the call waiting tone on the base unit.
1
Press MCALL WAITN to answer the 2nd
call.
Transferring a cellular call from the
base unit to a cellular phone
2
To switch between calls, press MCALL
WAITN.
During a cellular call, press and hold MCELL
1N or MCELL 2N until the SP-PHONE indicator
goes out.
R The cellular call is transferred to the cellular
phone.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Transferring a cellular call from a
cellular phone to the base unit
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
You can temporarily switch the dialing mode
to tone when you need to access touch-tone
services (for example, answering services,
telephone banking services, etc.).
During a conversation using a cellular phone,
press MCELL 1N or MCELL 2N.
R The cellular call is transferred to the base
unit.
Using the other line during a
conversation
Press * (TONE) before entering access
numbers which require tone dialing.
You can handle a cellular call and a landline
call at the same time. When another call is
being received during a conversation, the
interrupt tone sounds (page 42). You can
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line press MCELL 1N or MCELL
2N.
Making/answering a cellular call
– for the landline press MZN.
during a conversation on the landline
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 41).
1
2
Press MHOLDN during a landline call.
To make a 2nd call:
Dial the phone number. a Press MCELL
1N or MCELL 2N.
To answer a 2nd call:
Press MCELL 1N or MCELL 2N.
R To hold the 2nd call, press MHOLDN.
3
To hang up the 2nd call and return to the
1st call (landline call), press MZN 2 times.
Making/answering a landline call
duringa conversationon a cellularline
1
Press MHOLDN during a cellular call.
30
Making/Answering Calls Using the Base Unit
2
3
To make a 2nd call:
Dial the phone number. a MZN
To answer a 2nd call:
MZN
R To hold the 2nd call, press MHOLDN.
To hang up the 2nd call and return to the
1st call (cellular call), press MZN, then
press MCELL 1N or MCELL 2N.
31
Shared Phonebook
Key
Character
3
D
d
E
e
F
f
3
3
4
4
5
5
6
6
S
s
Shared phonebook
The shared phonebook allows you to make
calls without having to dial manually. The base
unit and any handset registered to the base
unit can use the shared phonebook. You can
add 3,000 names and phone numbers to the
shared phonebook, and assign each
4
5
6
7
8
9
G
g
H
h
I
i
J
K
k
L
l
j
phonebook entry to the desired group
(“Home”, “Cell 1”, “Cell 2”).
M
m
P
p
N
n
O
o
R
r
Important:
R Only 1 person can access the shared
phonebook at a time.
R Caller ID subscribers can use group ringer
tone features (page 49).
Bluetooth cellular phone to the unit’s
shared phonebook (page 52).
Q
q
7
7
T
t
U
u
V
v
Y
y
8
8
Z
z
W
w
X
x
9
9
0
#
0
Adding entries
#
Handset
R To enter another character that is located
on the same dial key, first press MEN to
move the cursor to the next space.
R If you do not press any dial key within 5
seconds after entering a character, the
character is fixed and the cursor moves to
the next space.
1
2
3
MFN
a MMENUN
MbN: “Add new entry” a MSELECTN
Enter the party’s name (16 characters
max.). a MOKN
4
5
Enter the party’s phone number (24 digits
max.). a MOKN
R
in the above table represents a single
space.
MbN: Select the desired group. a
MSELECTN 2 times
R To add other entries, repeat from step
3.
Erasing the character or number
Press MFN or MEN. a MCLEARN
R Press and hold MCLEARN to erase all
characters or numbers.
6
MOFFN
Character table for entering names
While entering characters, you can switch
between uppercase and lowercase by
pressing * (A®a).
Groups
Groups can help you find entries in the
phonebook quickly and easily. When adding
an entry to the phonebook, you can assign it
to one of 3 groups. You can search for
phonebook entries by group. The group ringer
tone feature is available for Caller ID
subscribers (page 49).
Key
Character
1
&
–
A
a
’
(
)
H
,
.
/
1
2
2
2
B
b
C
c
32
Shared Phonebook
R If there is no entry corresponding to
the character you selected, the next
entry is displayed.
Finding and calling from a
phonebook entry
3
4
MbN: Scroll through the phonebook if
necessary.
Scrolling through all entries
n Using a cellular line:
Handset
To make a cellular/landline call, continue
from step 3 for handset or step 3 for base
1
2
3
MFN
MbN: Select the desired entry.
Searching by query
MCELLN
You can narrow down the search to enter the
first characters of a name.
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
Handset / Base unit
1
2
Proceed with the operation for your unit.
4
MSELECTN
Handset: MFN
a *
Base unit: M
N a *
Base unit
To search for the name, enter the first
characters (up to 4) in uppercase
(page 32).
lowercase.
R If there is no entry corresponding to
the characters you selected, the next
entry is displayed.
1
2
3
M
N
MbN: Select the desired entry.
Press MCELL 1N or MCELL 2N.
n Using the landline:
Handset / Base unit
3
4
MOKN
1
Proceed with the operation for your unit.
Handset: MFN
MbN: Scroll through the phonebook if
necessary.
Base unit: M
N
5
To make a cellular/landline call, continue
from step 3 for handset or step 3 for base
2
3
MbN: Select the desired entry.
Proceed with the operation for your unit.
Handset: M
N
Base unit: MZN
Searching by group
Handset / Base unit
Searching by first character
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MFN
1
Proceed with the operation for your unit.
Handset: MFN
Base unit: M
N
Base unit: M
N
2
3
MGROUPN
2
Press the dial key (0 – 9 or #) which
contains the character you are searching
for (page 32).
display the first entry corresponding to
each character located on that dial key.
MbN: Select the group you want to search.
a MSELECTN
R If you select “All” on the handset or
“All groups” on the base unit, the
unit ends the group search.
33
Shared Phonebook
4
5
MbN: Select the desired entry.
5
6
MbN: “Yes” a MSELECTN
To make a cellular/landline call, continue
from step 3 for handset or step 3 for base
MOFFN
Base unit
N a MERASEN
1
2
M
MbN: Select the desired group. a
MSELECTN
Editing entries
3
4
MbN: “Yes” a MSELECTN
Handset
MbN: “Yes” a MSELECTN
1
2
3
Find the desired entry (page 33).
Chain dial
Edit the name if necessary (16 characters
max.; page 32). a MOKN
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
4
5
6
digits max.). a MOKN
MbN: Select the desired group (page 32).
a MSELECTN 2 times
MOFFN
Handset / Base unit
1
Proceed with the operation for your unit.
During an outside call:
Handset: MMENUN a MbN:
“Phonebook” a MSELECTN
Erasing entries
Erasing an entry
Handset
Base unit: M
N
2
3
MbN: Select the desired entry.
1
2
3
4
Find the desired entry (page 33).
MbN: “Yes” a MSELECTN
MOFFN
Press MCALLN to dial the number.
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press MDN (Pause) to add
pauses after the number and PIN as
necessary (page 22).
Base unit
1
2
3
Find the desired entry (page 33).
MEXITN
to press * (TONE) before pressing
MMENUN on the handset or M
N on the
base unit in step 1 to change the dialing
entries to the phonebook, we recommend
adding * (TONE) to the beginning of
phone numbers you wish to chain dial
(page 32).
Erasing all entries in a group
Handset
1
2
3
MFN
a MMENUN
MbN: “Erase all” a MSELECTN
MbN: Select the desired group. a
MSELECTN
4
MbN: “Yes” a MSELECTN
34
Speed Dial
Erasing an entry
Speed dial
1
Press and hold the desired speed dial key
(1 to 9). a MMENUN
You can assign 1 phone number to each of
the dial keys (1 to 9) on the handset.
2
3
4
MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN
MOFFN
Adding phone numbers to speed
dial keys
n By entering phone numbers:
Viewing speed dial key
assignments
1
Press and hold the desired speed dial
key (1 to 9). a MADDN
2
3
MbN: “Manual” a MSELECTN
You can see the speed dial key assignments
on the handset display.
Press and hold the desired speed dial key (1
to 9).
Enter the party’s name (16 characters
max.). a MOKN
4
5
Enter the party’s phone number (24
digits max.). a MOKN
Making a call using a speed dial
key
MSELECTN a MOFFN
n From the shared phonebook:
n Using a cellular line:
1
Press and hold the desired speed dial
key (1 to 9). a MADDN
1
Press and hold the desired speed dial
key (1 to 9).
2
3
4
MbN: “Phonebook” a MSELECTN
MbN: Select the desired entry.
MSAVEN a MOFFN
2
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
Note:
R If you edit a phonebook entry which is
assigned to a speed dial key, the edited
entry does not transfer to the speed dial
key.
3
a MSELECTN
n Using the landline:
1
Press and hold the desired speed dial
key (1 to 9).
Editing an entry
2
M
N
1
Press and hold the desired speed dial key
(1 to 9). a MMENUN
2
3
MbN: “Edit” a MSELECTN
Edit the name if necessary (16 characters
max.; page 32). a MOKN
4
5
digits max.). a MOKN
MSELECTN a MOFFN
35
Programming
Programmable settings
You can customize the unit by programming the following features.
To access the features, there are 2 methods.
Handset / Base unit
n Scrolling through the display menus
1
2
3
4
MMENUN
Press MCN or MDN to select the desired main menu. a MSELECTN
Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
Press MCN or MDN to select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN on the handset or MEXITN on the base unit.
n Using the direct command code
1
MMENUN a Enter the desired code.
Example: Press MMENUN#110.
For available code:
– Handset: see page 36.
2
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN on the handset or MEXITN on the base unit.
Note:
R In the following table, < > indicates the default settings.
R In the following table, indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display menu tree and direct command code table
n Handset
Main menu:
Operation
“Phonebook”
Code
#280
Viewing the phonebook entry.
33
49
58
Main menu:
Operation
“Caller list”
Code
#213
Viewing the caller list.
Main menu:
Sub-menu 1
“Answering device”
Sub-menu 2
Settings
Code
#323
Play new msg.
–
–
(msg.: message)
36
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
Play all msg.
–
–
–
–
–
–
–
#324
#325
#302
#303
#304
58
58
57
57
57
*1
Erase all msg.
Greeting
*1
Record greeting
Check greeting
*1
Pre-recorded
greeting)
New message
alert
Outgoing call
– On/Off
1: On0: <Off>
#338
59
*1
Outgoing call
–
– Notification to
Outgoing call
1: Activate
– Remote code
0: <Inactivate>
Base unit beep
1: On0: <Off>
#339
#211
59
61
*1
Settings
2–7: 2-7 rings
<4 rings>
Ring count
0: Toll saver
*1
1: 1 min
#305
62
Recording time
3: <3 min>
0: Greeting
*2
only
*1
#306
#310
#327
#328
60
56
56
56
Remote code
1: <On> 0: Off
*1
–
–
–
–
Answer on
*1
*3
Main menu:
Operation
“V.M. access” (V.M.: Voice mail)
Code
#330
Listening to voice mail messages.
64
65
Main menu:
Operation
“Intercom”
Code
#274
Paging the desired unit.
37
Programming
Main menu:
Sub-menu 1
“Bluetooth”
Sub-menu 2
Settings
Code
#6251
*1
*5
*6
*5
*6
Link to cell
–
19
22
29
–
Connect
/
*1
– 1: Add new
*4
device
– Handset
0–6: Off–6 <6>
– 2: Add new
*4
device
*5
*6
Ringer volume
– Base unit
0–6: Off–6 <1>
*1
*7, *8
*5
*5
Ringer tone
<Tone 2>
#6291
*6
*6
*5
Select unit to
ring
G: <All>
18
18
*1
*6
*5
Ring as cell
1: <On (with
Talking CID)>
2: On (without
Talking CID)
0: Off
*1
(limited)
*6
*5
Pair
Unpair
–
–
–
–
17
17
52
#6241
*6
*5
*6
Phonebook
transfer
#618
*4
Headset
–
–
#621
#622
54
54
Add new device
*1
Connect
/
*1
Pair
–
–
#621
#612
54
54
Unpair
38
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
*1
Settings
1: <1 min>
2: 3 min
3: 5 min
4: 10 min
0: Off
#632
18
Auto connect
*1
–
#633
#157
20
19
Cell area code
1: On 0: <Off>
*1
mode
*4
*4
– Handset
#634
20
1: Cellphone 1
0: <Manual>
*4
Cell line select
– Base unit
#G634
1: <Cellphone 1>
*1
*4
*1
<0000>
#619
20
Set PIN
Main menu:
“Set date & time”
Sub-menu 1
Date and time
Alarm
Sub-menu 2
Settings
Code
#101
#720
*1
–
–
–
16
44
1: Once
2: Daily
0: <Off>
*1, *9
–
1: <Caller ID auto>
#226
–
Time adjustment
0: Manual
Main menu:
Sub-menu 1
“Initial setting”
Sub-menu 2
Settings
Code
#160
#161
Ringer setting
Ringer volume
0–6: Off–6 <6>
<Tone 1>
22
–
*7, *8, *10
Ringer tone
(Handset)
Interrupt tone
– Handset
1: <On> 0: Off
1: <On> 0: Off
1: On0: <Off>
#201
25
30
44
45
*11
#G201
#238
*1, *11
– Base unit
– On/Off
Silent mode
<11:00 PM/06:00
#237
– Start/End
AM>
39
Programming
Sub-menu 1
Sub-menu 2
Date and time
Alarm
Settings
Code
#101
#720
*1
Set date & time
–
16
44
1: Once
2: Daily
0: <Off>
Time
adjustment
1: <Caller ID auto>
0: Manual
#226
–
*1, *9
Talking Caller ID Handset
Base unit
1: <On> 0: Off
#162
48
*1
1: On0: <Off>
#G162
#104
Handset name
–
–
45
–
*1
Key detector
setting
Detector1
#6561
Change name
*12
*14
*15
Detector2
#6562
#6572
#6582
#217
device
(for Detector1)
– 2: Add new
device
*14
*15
*15
*13
*14
Registration
Deregistration
–
–
–
–
*15
*15
*15
(for Detector2)
– 3: Add new
device
(for Detector3)
– 4: Add new
device
–
*15
*15
*15
(for Detector4)
*1
–
45
46
46
Call block
*1
1: <On> 0: Off
1: On0: <Off>
#173
First ring
*1, *2
#240
phone number)
Speed dial
Voice mail
–
–
–
#261
#331
35
63
Store VM
*1
access#
*1
1: <On> 0: Off
#332
#145
63
–
VM tone detect
LCD contrast
(Display contrast)
–
1–6: Level 1–6 <3>
*16
–
–
1: <On> 0: Off
#165
#214
–
Key tone
1: <On> 0: Off
50
(Caller ID number auto
edit)
40
Programming
Sub-menu 1
Sub-menu 2
–
Settings
Code
*17
1: On0: <Off>
#200
#120
22
16
Auto talk
*1
1: Pulse
Set dial mode
2: <Tone>
Set flash
time
0: 900 ms
1: <700 ms>
2: 600 ms
3: 400 ms
4: 300 ms
5: 250 ms
G: 200 ms
#: 160 ms
6: 110 ms
7: 100 ms
8: 90 ms
#121
23
*1, *18
9: 80 ms
*1, *19
1: A2: <B>
#122
#194
–
Set line mode
*1
–
1: <On> 0: Off
24,
30
Call sharing
Registration
Register handset
–
–
#130
#131
#152
#110
47
47
25
16
*2
Deregistration
Power failure
–
1: <Auto> 0: Off
Change language
Display
1: <English>
2: Español
*1
1: <English>
#112
16
Voice prompt
2: Español
Main menu:
Operation
“Customer support”
Code
#680
Displaying customer support Web address.
–
–
*12
Main menu:
“Key detector”
Sub-menu 1
Settings
Code
#655
Search
–
–
–
–
Battery check
41
Programming
n Base unit
Main menu:
“Phonebook”
Operation
Code
#280
Viewing the phonebook entry.
33
49
56
Main menu:
Operation
“Caller list”
Code
#213
Viewing the caller list.
Main menu:
“Answer device”
Sub-menu 2
Sub-menu 1
Settings
Code
#310
Screen call
–
<On> Off
Main menu:
“Bluetooth”
Sub-menu 2
Sub-menu 1
Settings
Code
#6281
#622
*20
*5
*6
*5
*6
Ringer volume
Off–6 <1>
29
53
–
Link to cell
*4
*4
*21
<On> Off
Text msg. alert
(msg.:message)
*22
*1
–
Headset
Connect
/
*1
–
*4
Cell line
#634
#117
#118
#119
20
52
<Cellphone 1>
Ph.book setting
(Ph.book:
Phonebook)
International
Country code
–
–
–
National access
Main menu:
“Initial setting”
Sub-menu 1
Sub-menu 2
Settings
Code
#160
#201
#238
Ringer setting
Ringer volume
Off–6 <1>
<On> Off
On<Off>
29
30
44
*1, *11
Interrupt tone
Silent mode
– On/Off
Silent mode
– Start/End
<11:00 PM/
06:00 AM>
#237
#162
45
48
Talking CID
–
On<Off>
42
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
*1
–
–
#217
#173
#240
45
46
46
Call block
*1
<On> Off
First ring
*1, *2
On<Off>
number)
LCD contrast
(Display contrast)
–
Level 1–6 <3>
#145
#214
–
Caller ID edit
(Caller ID number auto
edit)
–
<On> Off
50
Change language
–
<English>
#110
16
(Display)
Español
Main menu:
Operation
“Cust. Support”
Code
#680
Displaying customer support Web address.
–
*1 If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed (page 19).
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 If you select one of the melody ringer tones, it will continue to play for several seconds even
if the caller has already hung up. You may either hear a dial tone or no one on the line when
you answer the call.
*8 The preset melodies in this product are used with permission of © 2009 Copyrights Vision
Inc.
*9 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 16).
3). If you select a melody, you cannot distinguish lines by their ringers.
*11 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select “On”, the tone sounds 2 times.
*12 This setting is available when you have the key detector (KX-TGA20). Read the installation
guide for more information on the key detector.
*13 For models with supplied key detectors, the display shows "1: Detector1".
*14 If you register 2 or more key detectors.
*15 If you have 2 or more key detectors.
*16 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any
keys, including confirmation tones and error tones.
43
Programming
*17 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*18 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to
pick up the waiting call.
*19 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to “A” if telephone line condition is not good.
*20 This setting is available when a cellular phone is paired.
*21 KX-TG7871 series: page 3
7
MSELECTN a MOFFN
R When the alarm is set,
is displayed.
Special programming
Note:
R To stop the alarm, press MOFFN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
R Set the date and time beforehand
(page 16).
Silent mode
Silent mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Handset
1
2
MMENUN#720
MbN: Select the desired alarm option. a
MSELECTN
Important:
“Off”
“Once”
“Daily”
Turns alarm off. Go to
step 7.
R Set the date and time beforehand
(page 16).
even if the silent mode is turned on.
An alarm sounds once at
the set time.
An alarm sounds daily at
the set time. Go to step 4.
Turning silent mode on/off
Handset
3
Enter the desired month and date. a
MOKN
1
2
MMENUN#238
4
5
6
Set the desired time.
MbN: Select the desired setting. a
MSAVEN
*: Select “AM” or “PM”. a MOKN
R If you select “Off”, press MOFFN to
exit.
MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
3
4
Enter the desired hour and minute you
wish to start this feature.
*: Select “AM” or “PM”. a MOKN
44
Programming
5
Enter the desired hour and minute you
wish to end this feature.
2
Enter the desired name (max. 10
characters; see the character table,
page 32).
6
7
*: Select “AM” or “PM”.
MSAVEN a MOFFN
3
4
MSAVEN
R When the silent mode is set,
is
MbN: Select the desired setting. a
MSELECTN 2 times
displayed.
Base unit
5
MOFFN
1
2
MMENUN#238
MbN: Select the desired setting. a
MSAVEN
R If you select “Off”, press MEXITN to
Call block (Caller ID subscribers
only)
This feature allows the unit to reject calls when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
page 45).
number (“Blocking incoming calls without
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
5
MAM/PMN: Select “AM” or “PM”. a MOKN
Enter the desired hour and minute you
wish to end this feature.
6
7
MAM/PMN: Select “AM” or “PM”.
*1
MSAVEN a MEXITN
R When the silent mode is set,
displayed.
short time while the caller is being identified.
call block list, the unit emits no sound to the
caller, and disconnects the call.
is
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
“Off” (page 46).
Changing the start and end time
Handset / Base unit
Important:
1
2
MMENUN#237
R When the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
the call is logged in the caller list
Continue from step 3 for handset or step
off”, page 44.
(page 49) with
after the call is
disconnected.
R You can program this setting using either
the base unit or one of the handsets.
Changing the handset name
Each handset can be given a customized
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is “No”. If you select
“Yes” without entering any handset name,
“Handset 1” to “Handset 6” is displayed.
Storing unwanted callers
You can store up to 250 phone numbers in the
call block list.
Important:
R We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
Handset
1
MMENUN#104
n From the caller list:
45
Programming
7
MSAVEN a MEXITN
Handset
n By entering phone numbers:
n When a cellular phone is paired:
Handset
1
2
MCN CID
MbN: Select the entry to be blocked. a
MSELECTN
R To edit the number, press *
repeatedly until the phone number
is shown in the 10-digit format.
1
2
3
MMENUN#217
MMENUN a MbN: “Add” a MSELECTN
Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
4
MSAVEN a MOFFN
3
4
5
6
MSAVEN
MbN: “Call block” a MSELECTN
MbN: “Yes” a MSELECTN
Base unit
1
2
MMENUN#217 a MADDN
Edit the phone number if necessary
(24 digits max.).
Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
7
MSAVEN a MOFFN
3
MSAVEN a MEXITN
n When a cellular phone is not paired:
1
2
MCN CID
Blocking incoming calls without
phone number
MbN: Select the entry to be blocked.
R To edit the number: MMENUN a
MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
10-digit format. And then, press
MSAVEN. Go to step 5.
You can reject a call when no phone number
is provided, such as a call just showing “Out
of area”.
Handset / Base unit
1
2
MMENUN#240
3
4
5
6
7
MMENUN
MbN: Select the desired setting. a
MSAVEN
MbN: “Save CID” a MSELECTN
MbN: “Call block” a MSELECTN
MbN: “Yes” a MSELECTN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Edit the phone number if necessary
(24 digits max.).
Note:
R When the unit receives a cellular call
without a phone number, the call may not
be rejected.
8
MSAVEN a MOFFN
Base unit
1
2
MCIDN
Setting the first ring for the call block
list
MbN: Select the entry to be blocked.
R To edit the number, press MEDITN
repeatedly until the phone number is
shown in the 10-digit format.
Handset / Base unit
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to “Off”. The default setting is “On”.
3
4
5
6
MSAVEN
MbN: “Call block” a MSELECTN
MbN: “Yes” a MSELECTN
1
2
MMENUN#173
MbN: Select the desired setting. a
MSAVEN
Edit the phone number if necessary (24
digits max.).
46
Programming
Important:
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
R See page 5 for information on the available
Viewing/editing/erasing call block
numbers
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
Handset
1
2
MMENUN#217
MbN: Select the desired entry.
R To exit, press MOFFN.
1
Handset:
MMENUN#130
3
To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
2
Base unit:
Press and hold MLOCATORN for about 5
seconds until the registration tone sounds.
R If all registered handsets start ringing,
press MLOCATORN again to stop, then
repeat this step.
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
Base unit
R The next step must be completed
within 90 seconds.
1
2
MMENUN#217
MbN: Select the desired entry.
R To exit, press MEXITN.
3
Handset:
Press MOKN, then wait until a long beep
sounds.
3
To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MEXITN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
Note:
R While registering, “Base in
registering” is displayed on all
registered handsets.
R When you purchase an additional handset,
refer to the additional handset’s installation
manual for registration.
a MEXITN
Note for handset and base unit:
R When editing, press the desired dial key to
add, MCLEARN to erase.
R When viewing, “Block w/o num” is
displayed if the blocking incoming calls
without phone number feature is turned on.
To turn the feature off: MERASEN a MCN
a MSAVEN a MOFFN (Handset) or MEXITN
(Base unit)
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1
MMENUN#131
R All handsets registered to the base unit
are displayed.
Registering a unit
2
MbN: Select the handset you want to
cancel. a MSELECTN
Operating additional units
Additional handsets
3
4
MbN: “Yes” a MSELECTN
MOFFN
Up to 6 handsets can be registered to the
base unit.
47
Caller ID Service
Phonebook name display
Using Caller ID service
Important:
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
Talking Caller ID
Caller ID features
Handset / Base unit
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
Handset / Base unit
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– “Out of area”: The caller dials from
an area which does not provide a Caller
ID service.
– subscribe to a Caller ID service of your
service provider/telephone company.
– turn this feature on (page 40, 42).
handsets and base unit announce the caller’s
name or phone number received from your
service provider/telephone company following
every ring.
The unit announces in English only.
R Name pronunciation may vary. This feature
may not pronounce all names correctly.
R Caller ID service has a limit of how many
characters can be displayed. If the caller’s
name is too long, the unit may not be able
to display or announce the entire name.
R The announcement is heard at the same
level as the ringer volume (page 22, 29, 39,
42).
R If you turn on the answering system and set
the number of rings “2 rings” (page
information from the landline. If “Toll
saver” is selected and there is a new
message, the unit does not announce the
caller information from the landline.
R When you receive a call while on the
phone, the 2nd caller’s name is not
announced even if you subscribe to both
Caller ID and Call Waiting with Caller ID
services.
*1
*2
– “Private caller” / “Private”
information.
:
*1
– “Long distance” / “Long
*2
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
*1 Handset
*2 Base unit
Missed calls
Handset / Base unit
If a call is not answered, the unit treats it as a
missed call. The display shows “Missed
call”.
Note:
R Even when there are unviewed missed
calls, “Missed call” disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the base unit
or charger.
Phonebook name announcement
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
– Pressing MOFFN on a handset.
– Pressing MEXITN on the base unit.
48
Caller ID Service
– a specific line is set to make cellular
calls (page 20).
MSELECTN
Ringer ID for handset
You can select the desired ringer tone to a
group that each phonebook entry is assigned
(page 32). When a call is received from a
caller assigned to a group, the ringer tone you
selected for that group rings instead of the
called line’s ringer tone (page 18, 38, 39) after
“Current ringer” (default), the unit uses
the called line’s ringer tone you selected on
page 39 when calls from this group are
received.
5
Base unit
1
2
MCIDN
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
To call back, press MCELL 1N or MCELL
2N.
To exit, press MEXITN.
n Using the landline
Handset
Handset / Base unit
1
2
3
MFN
a MMENUN
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
MbN: “Group” a MSELECTN
MbN: Select the desired group. a
MSELECTN
2
3
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
4
5
MbN: Select the desired ringer tone. a
MSAVEN
Proceed with the operation for your unit.
Handset:
MOFFN
– To call back, press M
– To exit, press MOFFN.
Base unit:
– To call back, press MZN.
– To exit, press MEXITN.
N.
Caller list
Important:
Note for handset and base unit:
R If the entry has already been viewed or
answered, “ ” is displayed, even if it was
viewed or answered using another unit.
R In step 2 for handset or step 2 for base unit,
shown. To see the remaining information:
Handset:
R Only 1 person can access the caller list at a
time.
R Make sure the unit’s date and time setting
is correct (page 16).
Viewing the caller list and calling
back
Press MEN.
n Using a cellular line
To return to the previous screen, press MFN.
Base unit:
Handset
Press M
To return to the previous screen, press
N.
or
was received from the cellular line.
N.
1
2
MCN CID
M
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
R
indicates the caller information
3
4
To call back, press MSELECTN.
To exit, press MOFFN.
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
49
Caller ID Service
Base unit
Editing a caller’s phone number
before calling back
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
1
2
3
MCIDN
MbN: Select the desired entry.
Press MEDITN repeatedly until the phone
number is shown in the desired format.
Handset
A
Local phone number
n When a cellular phone is paired:
Example: 321-5555
B
C
Area code – Local phone number
Example: 555-321-5555
1 – Area code – Local phone number
Example: 1-555-321-5555
1
2
3
MCN CID
MbN: Select the desired entry.
Press MSELECTN, then press *
repeatedly until the phone number is
shown in the desired format.
4
Using a cellular line:
To make a cellular call, continue from
step 3, “Viewing the caller list and calling
MZN
A
Local phone number
Example: 321-5555
Area code – Local phone number
Example: 555-321-5555
1 – Area code – Local phone number
Example: 1-555-321-5555
B
C
Caller ID number auto edit feature
4
Using a cellular line:
Handset / Base unit
To make a cellular call, continue from
step 4, “Viewing the caller list and
Once you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area, so that you can call these local
numbers using caller information without
dialing the area code.
M
N
n When a cellular phone is not paired:
1
2
3
MCN CID
MbN: Select the desired entry.
MMENUN a MbN: “Edit” a
MSELECTN
4
Press MEDITN repeatedly until the
phone number is shown in the desired
format.
A
Local phone number
Example: 321-5555
Area code – Local phone number
Example: 555-321-5555
1 – Area code – Local phone number
Example: 1-555-321-5555
B
C
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller’s area
code are edited automatically.
This feature can be set for each unit (page 40,
43). The default setting is “On”.
5
M
N
50
Caller ID Service
n When a cellular phone is not paired:
Note:
1
2
MCN CID
R Phone numbers from the 4 most recently
edited area codes are automatically edited.
MbN: Select the desired entry.
R To edit the number: MMENUN a
MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
desired format. And then, press
MSAVEN. Go to step 5.
Erasing selected caller
information
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
3
4
5
6
MMENUN
MbN: “Save CID” a MSELECTN
MbN: “Phonebook” a MSELECTN
2
3
4
MbN: Select the desired entry.
Continue from step 3, “Editing entries”,
page 34.
MERASEN a MbN: “Yes” a MSELECTN
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
1
2
MCIDN
MbN: Select the desired entry.
Erasing all caller information
R To edit the number, press MEDITN
repeatedly until the phone number is
shown in the desired format.
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
3
4
5
MSAVEN
MbN: “Phonebook” a MSELECTN
MEXITN
2
3
MERASEN a MbN: “Yes” a MSELECTN
Note for base unit:
Handset: MOFFN
R If you stored caller information to the
phonebook using the base unit, the entry is
automatically assigned to “Home”.
R If you want to edit the caller name, you can
do so using the handset (page 34).
Storing caller information to the
phonebook
Handset
n When a cellular phone is paired:
1
2
MCN CID
MbN: Select the desired entry.
R To edit the number, press
MSELECTN, then press *
repeatedly until the phone number
is shown in the desired format.
3
4
5
MSAVEN
MbN: “Phonebook” a MSELECTN
Continue from step 3, “Editing entries”,
page 34.
51
Using Bluetooth Devices
PBAP (Phone Book Access Profile) for
Bluetooth connection.
Cellular phone:
Follow the instructions of your cellular
phone to copy phonebook entries.
R For other cellular phones (not paired),
you need to search for and select the
base unit. The base unit PIN (default:
“0000”) may be required.
Copying phonebook from a
cellular phone (phonebook
transfer)
You can copy phonebook entries from the
paired cellular phones or other cellular phones
(not paired) to the unit’s shared phonebook. A
cellular phone must be compatible with
Bluetooth wireless technology.
4
R The entries being copied are displayed
on the handset.
Important:
5
6
Handset:
R If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
R If a phonebook entry includes additional
data such as a picture, that entry may fail to
copy to the base unit.
R If your cellular phone includes international
call entries, set the conversion codes
before copying (page 52).
Wait until “Completed” is displayed.
R You can continue copying other entries
if necessary.
Handset: MOFFN
Note:
R Some copied entries may have characters
which do not exist in the character table
(page 32). These characters can be
displayed but cannot be entered when
editing an entry.
R The unit does not support some characters.
If a copied entry includes those characters,
they are replaced with other available
characters or “H”.
1
2
Handset:
MMENUN#618
Handset:
To copy from paired cellular phones:
MbN: Select the desired cellular phone. a
MSELECTN
R If you receive a call while copying
phonebook entries, the copying procedure
stops. Try again after finishing the call.
R Copied items are stored to the group
(“Cell 1” or “Cell 2”) which the
cellular phone is paired to.
Setting conversion codes
To copy from other cellular phones
(not paired):
MbN: “Other cell” a MSELECTN a
MbN: Select the group you want to copy to.
a MSELECTN
You must first set the following 3 dialing codes
in the base unit which you want to copy to
before transferring the phonebook from your
cellular phone (each 4 digits max.).
3
When “Use the cell to
transfer phone book” is displayed:
Go to step 4.
– “International”: An international prefix
used when you make an international call.
– “Country code”: Your country code for
international calls.
– “National access”: A trunk prefix; the
initial digit(s) to be dialed in a domestic call,
prior to the area code.
displayed:
MbN: Select “Auto” or “Manual”. a
MSELECTN
“Auto”: Download all entries from the
cellular phone automatically. Go to step 5.
R “Select mode” menu is displayed
only when the cellular phone supports
Base unit
1
2
MMENUN
To store “International”: #117
To store “Country code”: #118
52
Using Bluetooth Devices
To store “National access”:
#119
Text message alert settings
3
4
Enter the desired number. a MSAVEN
Your cellular phone
MEXITN
To use this text message alert feature, you
may need to turn on the notification of
Bluetooth setting on your cellular phone.
Note:
R After you copy the entries, confirm that the
Base unit
numbers were transferred correctly.
1
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
2
3
MbN: Select the desired setting.
Text message alert
MSAVEN a MEXITN
Available for:
KX-TG7871 series (page 3)
Note:
R If the text message alert feature does not
work, you must turn on notifications in the
Bluetooth settings of your cellular phone.
For instructions on how to do this, visit our
Web site:
R The unit cannot display or announce that a
text message has been received during a
call.
notify the arrival of a new text message on a
cellular phone that is paired with the base unit.
This notification is displayed momentarily on
both the handset and the base unit, and
announced 2 times. The announcement is in
English only.
The default setting is “On”.
R Text message alerts are not logged in the
caller list of your unit.
Important:
R To use the text message alert feature, you
need to pair your cellular phone to the base
unit (page 17).
Access Profile (MAP) specification. We
recommend that you confirm if your cellular
phone supports MAP in advance.
R For more details and the list of compatible
cellular phones, please visit our Web site:
Using a Bluetooth wireless
headset (optional) for
landline calls
By pairing a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
For those whose devices do not support
the Message Access Profile (MAP):
By installing the application “Text Message
Alert”, you can use the text message alert
feature. Please visit our Web site:
Important:
R 1 headset can be paired to the base unit.
However, only one Bluetooth device
(cellular phone or headset) can be
connected to the base unit at a time.
R For best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
R Refer to your cellular phone operating
instructions for information on how to install
applications.
53
Using Bluetooth Devices
Handset
MMENUN#612
Pairing a headset to the base unit
1
2
Important:
MbN: “Yes” a MSELECTN
R When the headset is unpaired, the
disappears from the base unit
display.
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Your headset:
Set your headset to pairing mode.
R Refer to the headset operating
instructions.
3
MOFFN
2
3
Handset:
MMENUN#621
Operating a Bluetooth wireless
headset using a landline
Important:
If your headset PIN is “0000”, go to
step 4.
“0000”, press MCLEARN, then enter your
headset PIN.
R Refer to your headset operating instructions
for headset operations.
R Typically, default PIN is “0000”. Refer
to the headset operating instructions.
Answering landline calls with your
headset
4
5
Press MOKN, then wait until a long beep
sounds.
To answer a landline call, turn on your
headset referring to your headset operating
instructions.
When you finish talking, turn off your headset
referring to your headset operating
instructions.
MOFFN
R When
is displayed on the base
unit, the headset is available for use.
Connecting/disconnecting a headset
Note:
If you cannot connect the headset and base
unit using the headset, you can connect using
the unit.
R If you cannot hang up the call using your
headset, press MZN on the base unit 2
times.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Switching between the base unit and
your headset
Important:
You can switch between the base unit and
your headset:
R Make sure that the headset is turned on.
– during a landline call with the base unit
speakerphone.
– during an intercom call between the base
unit and handset.
– while listening to messages recorded on
the base unit answering system.
Handset / Base unit
1
2
To connect/disconnect:
MMENUN#622
R A long beep sounds.
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
n To switch to your headset:
Press M N on the base unit.
n To switch to the base unit:
Press MZN on the base unit.
Unpairing a headset
You can cancel a pairing of the headset that is
stored to the base unit.
54
Using Bluetooth Devices
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 41).
To join the conversation with your headset,
turn on the headset referring to your
headset operating instructions.
n While your headset is on a landline call:
To join the conversation with the handset,
press M
N.
Adjusting your headset receiver
volume
Base unit
Press MDN or MCN repeatedly while using your
headset.
55
Answering System for Landline
Answering system for
landline
Turning the answering
system on/off
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 62).
Base unit
Press MANSWER ON/OFFN to turn on/off the
answering system.
Handset
1
To turn on:
MMENUN#327
To turn off:
Important:
R Only 1 person can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
MMENUN#328
2
MOFFN
R When callers leave messages, the unit
records the day and time of each message.
Make sure the date and time have been set
correctly (page 16).
Note for base unit and handset:
R When the answering system is turned on,
the ANSWER ON/OFF indicator on the
base unit lights up.
(page 19), the answering system cannot be
used and any messages are not received.
Call screening
Handset / Base unit
While a caller is leaving a message, you can
listen to the call through the unit’s speaker.
To adjust the speaker volume, press MDN or
MCN repeatedly.
Memory capacity (including your
greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
You can answer the call by pressing M
the handset or MZN on the base unit.
Call screening can be set for each unit. The
default setting is “On”.
N on
Note:
R When message memory becomes full:
– “Messages full” is shown on the
handset and base unit display.
– The ANSWER ON/OFF indicator on the
base unit flashes rapidly if the answering
system is turned on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
1
2
MMENUN#310
MbN: Select the desired setting. a
MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
56
Answering System for Landline
Recording your greeting message
Listening to messages
using the base unit
Handset
1
2
3
MMENUN#302
When new messages have been recorded:
–
M
N on the base unit flashes.
MbN: “Yes” a MSELECTN
– “New message” is displayed.
Press M N (PLAY).
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4
5
Press MSTOPN to stop recording.
MOFFN
Operating the answering system
during playback
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
Key
Operation
MDN or MCN
Adjust the speaker
volume
*1
M
M
N
N
Repeat message
Skip message
MPAUSEN
Pause message
To resume playback,
press M N.
– If the message recording time (page 62)
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
MnN (STOP)
Stop playback
MERASEN
Erase currently playing
message
Resetting to a pre-recorded greeting
message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
Calling back (Caller ID
subscribers only)
Handset
If caller information was received for the call,
you can call the caller back while listening to a
message.
1
2
MMENUN#304
MYESN a MOFFN
Press MZN during playback.
R To edit the number before calling back,
press MEDITN repeatedly until the phone
number is shown in the desired format
(page 50).
from step 2, “Making cellular calls”, page 28.
Playing back the greeting
message
Handset
1
2
MMENUN#303
To exit, press MOFFN.
57
Answering System for Landline
Key
Operation
Erasing all messages
Press MERASEN 2 times while the unit is not in
use.
8
Turn answering system on
*2
MPAUSEN
Pause message
9 or
MSTOPN
Stop recording
Stop playback
0
Turn answering system off
Listening to messages
using the handset
*3
Erase currently playing
message
*4
When new messages have been recorded,
*5
*6
Erase all messages
“New message” is displayed.
Reset to a pre-recorded
greeting message
1
To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
2
Note:
When finished, press MOFFN.
*2 To resume playback:
MbN: “Playback” a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: “Erase” a
MSELECTN a MbN: “Yes” a MSELECTN
R To switch to the receiver, press M
N.
R In step 1, the following soft key is also
When a cellular phone is paired:
*1
MMENUN a MPLAYN
MPLAYN
Calling back (Caller ID
subscribers only)
If caller information is received for the call, you
can call the caller back while listening to a
message.
*1
answering system, MPLAYN is not
displayed.
1
2
Press MPAUSEN during playback.
Operating the answering system
MMENUN a MbN: “Answering device” a
MbN: “Call back” a MSELECTN
MSELECTN
Editingthe numberbefore callingback
Key
Operation
1
2
3
Press MPAUSEN during playback.
MDN or MCN
Adjust the receiver/speaker
volume (during playback)
MbN: “Edit & Call” a MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the desired format
1 or MFN
Repeat message (during
*1
playback)
(page 50). a M
N
2 or MEN
playback)
continue from step 2, “Making cellular
calls”, page 21.
3
Enter the “Settings” menu
Play new messages
4
Erasing all messages
5
Play all messages
6
Play greeting message
Record greeting message
1
2
MMENUN#325
76
MbN: “Yes” a MSELECTN a MOFFN
58
Answering System for Landline
Storing a phone number to which the
unit makes an alert call
Advanced new message
alerting features
Handset
n From the phonebook:
Audible message alert
1
2
MMENUN#338
This feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the “Base unit beep”
setting is turned on. The default setting is
“Off”.
MbN: “Notification to” a
MSELECTN a MADDN
3
4
MbN: “Phonebook” a MSELECTN
MbN: Select the desired phonebook
entry. a MSAVEN a MOFFN
n By entering a phone number:
Handset
1
2
MMENUN#338
1
2
MMENUN#339
MbN: “Notification to” a
MSELECTN a MADDN
MbN: Select the desired setting. a
MSAVEN a MOFFN
3
4
MbN: “Manual” a MSELECTN
Note:
Enter the desired name (16 characters
max.; page 32). a MOKN
R When the silent mode is activated
(page 44), the base unit beeps will not
sound.
5
max.). a MOKN a MSELECTN a
MOFFN
New message alert by a call
Turning on/off the new message alert
setting
This feature allows the unit to make a call to
the pre-stored phone number and inform you
that a new message has been received by
announcement.
Handset
To use this feature, you must:
– store a phone number to which the unit
makes the call to.
– turn on the new message alert setting.
After you answer the new message alert call,
you can listen to messages from that call
(page 60).
1
2
3
MMENUN#338
MbN: “On/Off” a MSELECTN
MbN: Select the desired setting. a
MSAVEN a MOFFN
Editing the set phone number
Handset
Important:
R The unit makes a call to the pre-stored
phone number after the new message is
recorded:
– If the call is answered, the
announcement is repeated for about 1
minute.
1
2
3
4
MMENUN#338
MbN: “Notification to” a MSELECTN
MMENUN a MbN: “Edit” a MSELECTN
Edit the name if necessary (16 characters
max.; page 32). a MOKN
– If nobody answers within 1 minute, the
unit will not retry the call.
5
digits max.). a MOKN a MSELECTN a
MOFFN
59
Answering System for Landline
Note:
Erasing the set phone number
Handset
R After listening to new messages, you can
press #9 during the call to turn off the
new message alert by a call feature.
R Even if the unit makes a new message alert
call, the handset redial list does not show
the record. However, on the base unit redial
list it is shown as “Message alert”.
1
2
3
4
MMENUN#338
MbN: “Notification to” a MSELECTN
MMENUN a MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
R The new message alert setting is
turned off.
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.
Activating/inactivating the remote
access code to play messages
If you activate this feature, you must enter the
remote access code (page 60) to play the
call. This is so that unauthorized parties
cannot listen to your messages. The default
setting is “Inactivate”.
– “Inactivate”: You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is “111”.
– “Activate”: You must enter your remote
access code (page 60) and then press 4
Important:
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
Handset
1
2
3
MMENUN#338
MbN: “Remote code” a MSELECTN
Handset
MbN: Select the desired setting. a
MSAVEN a MOFFN
1
2
MMENUN#306
Enter the desired 3-digit remote access
code.
Listening to messages
3
MSAVEN a MOFFN
After you answer the new message alert, you
can listen to the messages as follows.
Deactivating remote operation
n When the remote access code is set to
“Inactivate”:
Press 4 to play the new message during
the announcement.
Press * in step 2 on “Remote access code”,
page 60.
n When the remote access code is set to
“Activate”:
Using the answering system
remotely
1
Enter the remote access code
(page 60) during the announcement.
1
Dial your landline phone number from a
touch-tone phone.
2
60
Answering System for Landline
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 For English voice guidance only
*3 For Spanish voice guidance only
2
3
After the greeting message starts, enter
your remote access code.
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 61).
4
When finished, hang up.
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
Voice guidance
n When the English voice guidance is
selected
1
2
3
Dial your phone number from a
touch-tone phone.
During remote operation, the unit’s voice
guidance starts and prompts you to press
1 to perform a specific operation, or press
2 to listen to more available operations.
Let the phone ring 15 times.
R A long beep is heard.
n When the Spanish voice guidance is
selected
Enter your remote access code within 10
seconds after the long beep.
To start the voice guidance, press 9. The
voice guidance announces the available
remote commands (page 61).
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 60).
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Answering system settings
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Number of rings before the unit
answers a call
You can change the number of times the
phone rings “Ring count” before the unit
answers calls. You can select 2 to 7 rings, or
“Toll saver”.
Key
Operation
1
Repeat message (during
playback)
The default setting is “4 rings”.
*1
“Toll saver”: The unit’s answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 60), you
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
2
4
5
9
Play new messages
Play all messages
*2
Stop playback
*3
0
Erase currently playing message
Erase all messages
*4
*5
*#
Handset
1
2
MMENUN#211
End remote operation
(or hang up)
MbN: Select the desired setting. a
MSAVEN a MOFFN
61
Answering System for Landline
Note:
For voice mail service subscribers
R When you select “Greeting only”:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 57).
If you subscribe to a flat-rate service package
that includes Caller ID, call waiting, voice mail,
and unlimited local/regional/long distance
calls, please note the following:
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 56).
than the voice mail service provided by
your service provider/telephone company,
please contact your service provider/
telephone company to deactivate your
voice mail service.
If your service provider/telephone company
cannot do this:
– Set this unit’s “Ring count” setting so
that this unit’s answering system
answers calls before the voice mail
service of your service provider/
telephone company does. It is necessary
to check the number of rings required to
activate the voice mail service provided
by your service provider/telephone
company before changing this setting.
– Change the number of rings of the voice
mail service so that the answering
system can answer the call first. To do
so, contact your service provider/
telephone company.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is “3 min”.
Handset
1
2
MMENUN#305
MbN: Select the desired setting. a
MSAVEN a MOFFN
Selecting “Greeting only”
You can select “Greeting only” which sets
the unit to announce a greeting message to
callers but not record messages.
Select “Greeting only” in step 2 on
62
Voice Mail Service for Landline
Example:
1-222-333-4444
Voice mail service for
landline
Voice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone. Please contact
your service provider/telephone company for
details of this service.
PPPP
8888
VM access
number
Pauses Password
To erase the voice mail access
number
Handset
1
2
MMENUN#331
Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
Important:
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 56).
For details, see page 62.
Voice mail (VM) tone detection
Handset / Base unit
Your service provider/telephone company
sends special signals (sometimes called
“voice mail tones” or “stutter tones”) to the unit
to let you know you have new voice mail
messages. If you hear a series of dial tones
followed by a continuous dial tone after you
Storing the voice mail (VM)
access number
In order to listen to your voice mail messages,
you must dial your service provider/telephone
company’s voice mail access number. Once
you have stored your voice mail access
number, you can dial it automatically
(page 64).
press M
N on the handset or press MZN on
the base unit, you have new voice mail
messages. Soon after you hang up a call or
after the phone stops ringing, your unit checks
the phone line to see if new voice mail
messages have been recorded.
Handset
Turn this feature off when:
– You do not subscribe to voice mail service.
– Your service provider/telephone company
does not send voice mail tones.
– Your phone is connected to a PBX.
If you are not sure which setting is required,
contact your service provider/telephone
company.
1
2
MMENUN#331
Enter your access number (24 digits
max.). a MSAVEN a MOFFN
Note:
R When storing your voice mail access
number and your mailbox password, press
MDN (Pause) to add pauses (page 22)
password as necessary. Contact your
service provider/telephone company for the
required pause time.
Turning VM tone detection on/off
The default setting is “On”.
Handset
1
2
MMENUN#332
MbN: Select the desired setting. a
MSAVEN a MOFFN
63
Voice Mail Service for Landline
Listening to voice mail messages
The unit lets you know that you have new
voice mail messages in the following way:
– “New Voice Mail” is displayed if
message indication service is available.
Handset
1
MMENUN#330
R The speakerphone turns on.
2
3
Follow the pre-recorded instructions.
When finished, press MOFFN.
Note:
*1
R In step 1, you can also press MVMN to
*1 MVMN is displayed if a cellular phone is
not paired and there are new messages
in the voice mail.
Base unit
To listen to voice mail messages, you have to
dial your voice mail access number manually.
Note for handset and base unit:
R If the handset and base unit still indicate
there are new messages even after you
have listened to all new messages, turn it
off by pressing and holding # until the
handset or base unit beeps.
64
Intercom/Locator
Answering an intercom call
Intercom
Handset
Intercom calls can be made:
– between handsets
1
2
Press M
N to answer the page.
– between a handset and the base unit
When you finish talking, press MOFFN.
Base unit
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones.
– To answer the call with the handset,
1
2
Press MINTERCOMN to answer the page.
When you finish talking, press
MINTERCOMN.
press MOFFN, then press M
N.
– To answer the call with the base unit,
press MZN 2 times.
Handset locator
You can locate a misplaced handset by
paging it.
Making an intercom call
Handset
1
Base unit: Press MLOCATORN.
R All registered handsets beep for 1
minute.
1
2
3
MMENUN a MbN: “Intercom” a
MSELECTN
2
To stop paging:
Base unit:
Press MLOCATORN.
Handset:
MbN: Select the desired unit. a MSELECTN
R To stop paging, press MOFFN.
When you finish talking, press MOFFN.
Press M
N, then press MOFFN.
Note:
R In step 1, the following soft key is also
When a cellular phone is paired:
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made:
*1
MMENUN a MINTN
*1
MINTN
mail or answering system, MINTN is not
displayed.
– between 2 handsets
– between a handset and the base unit
Base unit
Handset
1
Press MINTERCOMN.
When 2 or more handsets are
registered:
1
During an outside call, press MMENUN to
put the call on hold.
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2
3
4
MbN: “Intercom” a MSELECTN
MbN: Select the desired unit. a MSELECTN
Wait for the paged party to answer.
R If the paged party does not answer,
R To stop paging, press MINTERCOMN.
press M
call.
N to return to the outside
2
When you finish talking, press
MINTERCOMN.
65
Intercom/Locator
5
To complete the transfer:
Press MOFFN.
R The outside call is being routed to the
destination unit.
Base unit
Press MZN to answer the page.
To establish a conference call:
MMENUN a MbN: “Conf.” a MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference: MMENUN
a MbN: “Conf.” a MSELECTN
R To cancel the conference: MMENUN a
MbN: “Stop conference” a
MSELECTN
You can continue the conversation
with the outside caller.
Base unit
1
During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2
3
Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
To complete the transfer:
Press MZN.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press MZN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
Answering a transferred call
Handset
Press M
N to answer the page.
66
Useful Information
3
Insert the lower tabs of the adaptor into
the unit’s bottom slots (A), then insert by
pushing down the levers of the adaptor
into the upper slots (B).
Wall mounting
The base unit can be mounted on a wall by
changing the wall mounting adaptor’s position.
R The words “UP WALL” should be
facing up.
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
B
R Model shown is KX-TG7841 series.
B
Base unit
A
A
1
To remove the wall mounting adaptor,
push down the release levers (A).
Remove the adaptor (B).
B
B
4
Mount the unit on a wall then slide down
to secure in place.
1
83 mm
1
A
A
(3 / inches)
4
or
102 mm
(4 inches)
2
A Turn the adaptor so that the words
“UP WALL” are facing up.
2
B Tuck the telephone line cord inside the
wall mounting adaptor.
Wall phone plate
C Connect the AC adaptor cord and
telephone line cord.
102 mm
(4 inches)
83 mm
1
1
2
(3 / inches)
4
3
Hook
Charger
Drive the screws (not supplied) into the wall.
1
27.2 mm
1
2
(ꢀ
ޓ / ꢁꢁinches) 16
Screws
67
Useful Information
Error messages
Display message
Cause/solution
Base no power
or
No link. Re-connect base
AC adaptor.
R The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
or
R The handset’s registration may have been canceled.
Re-register the handset (page 47).
No link.
failure, place a handset on the base unit to supply
power to the base unit.
Busy
R No cellular phone is paired to the base unit. Pair a
cellular phone (page 17).
R Other units are in use and the system is busy. Try
again later.
R The handset you are using is too far from the base
unit. Move closer and try again.
Call phone company for
your access #
R You have not stored the voice mail access number.
Store the number (page 63).
Check tel line
connected yet or not connected properly. Check the
connections (page 10).
only cellular lines, set the cellular line only mode
(page 19).
Error!!
R Someone is using a cellular line or headset. Try
again later.
R The phonebook copy is incomplete (page 52). The
Make sure that other Bluetooth devices are not
connected to the cellular phone, and try again.
Failed
R Although the unit tried to connect to the cellular
phone or headset, the connection has been failed.
– Someone is using a cellular line or headset. Try
again later.
– Make sure that the cellular phone or headset is
not connected to other Bluetooth devices.
Invalid
R There is no handset registered to the base unit
matching the handset number you entered.
R The handset is not registered to the base unit.
Register the handset (page 47).
Requires subscription to
Caller ID.
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
68
Useful Information
Display message
Cause/solution
Use rechargeable battery.
R A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 7.
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,
and then insert the batteries into the handset again.
General use
Problem
Cause/solution
The handset does not turn on
even after installing charged
batteries.
R Place the handset on the base unit or charger to turn on
the handset.
The unit does not work.
R Make sure the batteries are installed correctly (page 11).
R Fully charge the batteries (page 11).
Reconnect the adaptor and try again.
R The handset has not been registered to the base unit.
Register the handset (page 47).
the base unit.
may not be able to pair it to the base unit. Confirm that
your cellular phone supports the hands-free profile (HFP)
specification.
R Confirm that the Bluetooth feature of your cellular phone
is turned on. You may need to turn this feature on
depending on your cellular phone.
R The Bluetooth technology on your cellular phone may not
be functioning normally. Turn off and on your cellular
phone.
R If your cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from your cellular phone.
R Some cellular phones may require you to enter the base
unit PIN to pairing. Confirm that you entered the correct
PIN.
69
Useful Information
Problem
Cause/solution
I cannot connect a cellular
phone to the base unit.
R Confirm that your cellular phone is turned on.
R Confirm that your cellular phone is within base unit range
(page 14).
as the presence of any electrical interference, there may
be a delay even if the auto connection feature is turned
on. You can connect to the base unit manually (page 19).
Pair the cellular phone (page 17).
I cannot hear a dial tone.
(page 15).
connected. Check the connections.
R Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your service
provider/telephone company.
The base unit beeps.
R New messages have been recorded. Listen to the new
messages (page 57).
Programmable settings
Problem
Cause/solution
The display is in a language I
cannot read.
R Change the display language (page 16).
I cannot register a handset to a R The maximum number of handsets (6) is already
base unit.
registered to the base unit. Cancel unused handset
registrations from the base unit (page 47).
Battery recharge
Problem
Cause/solution
R Battery charge is low. Fully charge the batteries (page 11).
The handset beeps and/or
flashes.
I fully charged the batteries, but
R Clean the battery ends (
with a dry cloth and charge again.
R It is time to replace the batteries (page 11).
,
) and the charge contacts
–
–
still flashes,
is displayed, or
– the operating time seems to
be shorter.
70
Useful Information
Making/answering calls, intercom
Problem
is displayed.
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 47).
Noise is heard, sound cuts in
and out.
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
The handset or base unit does R The ringer volume for landline is turned off. Adjust the
not ring.
ringer volume (page 39, 42).
ringer volume (page 38, 42).
other units do not ring. To change the selection, see
page 20.
I cannot make local calls with
the handset or base unit using
a cellular line.
calls. Store your area code in order to automatically add it
to the beginning of the 7-digit phone number when
making cellular calls (page 20).
I cannot make or answer
cellular calls with the handset
or base unit.
not be able to make or answer cellular calls even if the
cellular phone is connected to the base unit.
R Make sure that the CELL 1 or CELL 2 indicator lights up
and the cellular phone is connected to the base unit
(page 19).
headset, you cannot use the cellular feature. There can
be only one active Bluetooth connection at a time.
R The cellular phone is being used separately from your
system.
I can make and answer cellular R The Bluetooth technology on your cellular phone may not
calls but cannot hear a sound.
be functioning normally. Turn off and on your cellular
phone.
R Disconnect and reconnect the base unit AC adaptor and
try again.
I cannot switch cellular calls
from the unit to the cellular
phone.
R Your cellular phone may not support this feature. Refer to
the operating instructions of your cellular phone.
71
Useful Information
Problem
Cause/solution
I cannot make a call using the
landline.
R The dialing mode may be set incorrectly. Change the
setting (page 16).
(page 19).
I cannot make long distance
calls.
Caller ID/Talking Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R You must subscribe to Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service for landline calls may not be
available in some areas. Contact your service provider/
telephone company for details.
R Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
Caller information is displayed
or announced late.
R Depending on your service provider/telephone company,
the unit may display or announce the caller’s information
at the 2nd ring or later.
R Move closer to the base unit.
Caller information is not
announced.
R The ringer volume for landline is turned off. Adjust the
ringer volume (page 39, 42).
ringer volume (page 38, 42).
other units do not announce caller information. To change
the selection, see page 18.
(page 40, 42).
CID)”. To change the mode, see page 18.
rings” or “Toll saver”. Select a different setting
(page 61).
– the base unit or 2 or more handsets are on a call.
– a headset is in use.
72
Useful Information
Problem
Cause/solution
The caller list/incoming phone
numbers are not edited
automatically.
R The Caller ID number auto edit feature is turned off. Turn
it on and try again (page 40, 43).
ID number auto edit.
I cannot dial the phone number R The phone number you dialed might have been edited
edited in the caller list.
incorrectly (for example, the long distance “1” or the area
code is missing). Edit the phone number with another
pattern (page 50).
Time on the unit has shifted.
changes the time. Set the time adjustment to
“Manual” (off) (page 40).
The 2nd caller’s information is
not displayed during an outside
call.
Caller ID (CWID), you must first contact your service
provider/telephone company and subscribe to the desired
service.
After subscribing, you may need to contact your service
provider/telephone company again to activate this specific
service, even if you already subscribed to both Caller ID
and Call Waiting with Caller ID services (CWID).
Using Bluetooth devices
Problem
Cause/solution
I cannot copy phonebook
entries from a cellular phone.
R Confirm that the cellular phone supports Bluetooth
wireless technology.
R Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R If the cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the cellular phone.
R Someone is using a cellular line or headset. Try again
later.
R Turn the cellular phone off, then turn it on and try again.
R If an entry is already stored in the unit’s shared
phonebook, the entry cannot be copied even by selecting
another group.
I cannot have a conversation
using the headset.
R Your Bluetooth headset is not paired. Pair it (page 54).
Noise is heard during a call on
the headset.
R A Bluetooth headset can communicate with the base unit
within a range of approximately 10 m (33 feet). The
connection may be subject to interference from
obstructions such as walls or electronic devices. Move
closer to the base unit.
73
Useful Information
Problem
Cause/solution
I cannot connect my headset to R Confirm that your headset is turned on.
the base unit.
R If your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the
headset from your cellular phone, then perform the
connecting procedure from the base unit.
R If someone is using a cellular line, you cannot connect the
headset. There can be only one active Bluetooth
connection at a time.
R The headset has not been paired to the base unit. Pair
the headset (page 54).
Some headset enhanced
features are not available.
as Last number redial or Call reject.
An error tone is heard when I
try to program the Bluetooth
feature.
R The Bluetooth feature cannot be accessed immediately
after connecting the AC adaptor to the base unit. Wait a
few seconds and try again.
R The headset has not connected to the base unit yet, even
though you performed the connecting procedure setting.
Wait a few seconds and try again.
Text message alert is not
announced.
R The text message alert announcement depends on the
“Ring as cell (limited)” setting (page 18) and the
2 methods available, depending on whether or not you
want the unit to emit the same ring as the cellular phone
when a call is being received on the cellular phone.
– If you prefer the same ring as the cellular phone, select
“On (with Talking CID)” of the “Ring as
cell (limited)” setting.
– If you prefer the same ring as the unit, select “Off” of
the “Ring as cell (limited)” setting, and select
“On” of the “Talking Caller ID” setting on the
handset and base unit.
74
Useful Information
Answering system
Problem
Cause/solution
The unit does not record new
messages.
R The answering system is turned off. Turn it on (page 56).
from cellular lines.
R The message memory is full. Erase unnecessary
messages (page 57).
the setting (page 62).
recorded by your service provider/telephone company,
not your telephone. Change the unit’s number of rings
setting or contact your service provider/telephone
company (page 62).
while:
– the base unit or 2 or more handsets are on a cellular
call or an intercom call.
– a headset is in use.
Caller information is recorded in the caller list.
I cannot operate the answering R The remote access code is not set. Set the remote
system remotely.
access code (page 60).
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 60).
cellular phone paired to the base unit.
The unit does not emit the
specified number of rings.
R If the first ring is turned off, the number of rings decreases
by 1 from the specified number of rings.
Bluetooth PIN
Problem
Cause/solution
I cannot remember the PIN.
R Change the PIN using the following method.
1
2
3
4
MMENUN#619
*7000
Enter the new 4-digit PIN. a MOKN
Enter the new 4-digit PIN again. a MSAVEN a MOFFN
75
Useful Information
Liquid damage
Problem
Cause/solution
Liquid or other form of moisture R Disconnect the AC adaptor and telephone line cord from
has entered the handset/base
unit.
the base unit. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/base
unit are completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and charge fully
before use. If the unit does not work properly, contact an
authorized service center.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
76
Useful Information
FCC and other information
This equipment complies with Part 68 of the
FCC rules and the requirements adopted by
the ACTA. On the bottom of this equipment
is a label that contains, among other
information, a product identifier in the
format US:ACJ----------.
If requested, this number must be provided
to the telephone company.
L Registration No.............(found on the
bottom of the unit)
advised of your right to file a complaint with
the FCC if you believe it is necessary.
The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the
telephone company will provide advance
notice in order for you to make necessary
modifications to maintain uninterrupted
service.
L Ringer Equivalence No. (REN).......0.1B
If trouble is experienced with this
equipment, for repair or warranty
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular plug
is provided with the product. It is designed
to be connected to a compatible modular
jack that is also compliant.
information, please contact a Factory
Service Center or other Authorized Servicer.
If the equipment is causing harm to the
telephone network, the telephone company
may request that you disconnect the
equipment until the problem is resolved.
Connection to party line service is subject to
state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
The REN is used to determine the number
of devices that may be connected to a
telephone line. Excessive RENs on a
telephone line may result in the devices not
ringing in response to an incoming call. In
most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain
of the number of devices that may be
connected to a line, as determined by the
total RENs, contact the local telephone
company. For products approved after July
23, 2001, the REN for the product is part of
the product identifier that has the format
US:AAAEQ##TXXXX. The digits
If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this equipment
does not disable your alarm equipment. If
you have questions about what will disable
alarm equipment, consult your telephone
company or a qualified installer.
This equipment is hearing aid compatible as
defined by the FCC in 47 CFR Section
68.316.
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
When you hold the phone to your ear, noise
might be heard in your Hearing Aid. Some
Hearing Aids are not adequately shielded
from external RF (radio frequency) energy. If
noise occurs, use an optional headset
accessory or the speakerphone option (if
applicable) when using this phone. Consult
with your audiologist or Hearing Aid
If this equipment causes harm to the
telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice isn't practical, the
telephone company will notify the customer
as soon as possible. Also, you will be
77
Useful Information
manufacturer about the availability of
Hearing Aids which provide adequate
shielding to RF energy commonly emitted
by digital devices.
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to
the dispatcher the reason for the call.
2) Perform such activities in the off-peak
hours, such as early morning or late
evenings.
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
cordless telephone should not be placed
near or on top of a TV or VCR. If
interference is experienced, move the
cordless telephone further away from the TV
or VCR. This will often reduce or eliminate
interference.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Privacy of communications may not be
ensured when using this phone.
FCC RF Exposure Warning:
L This product complies with FCC radiation
exposure limits set forth for an
uncontrolled environment.
CAUTION:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate this device.
L To comply with FCC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8 inches)
or more between the product and all
person’s body (excluding extremities of
hands, wrist and feet).
L This product may not be collocated or
operated in conjunction with any other
antenna or transmitter.
L The handset may be carried and operated
with only the specific provided belt-clip.
Other non-tested belt-clips or similar
body-worn accessories may not comply
and must be avoided.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
Notice:
L FCC ID can be found inside the battery
compartment or on the bottom of the
units.
78
Useful Information
Compliance with TIA-1083 standard:
Telephone handsets identified with this logo
have reduced noise and interference when
used with T-Coil equipped hearing aids and
cochlear implants.
Compatible with
Hearing Aid T-Coil
T
TIA-1083
79
Guía Rápida Española
Guía Rápida Española
Conexiones
Unidad base para la serie KX-TG7841
L
Use solo el adaptador de corriente Panasonic PNLV226 incluido.
Oprima firmemente
el contacto.
“Clic”
Gancho
“Clic”
Correcto
Incorrecto
A la toma de
teléfono de línea
única (RJ11C)
A la toma
de corriente
Filtro DSL/ADSL*
*Se requiere un filtro DSL/ADSL (no incluido) si tiene servicio de DSL/ADSL.
Unidad base para la serie KX-TG7871
L
Use solo el adaptador de corriente Panasonic PNLV234 incluido.
“Clic” “Clic”
“Clic”
A la toma de
teléfono de línea
única (RJ11C)
A la toma
de corriente
Filtro DSL/ADSL*
*Se requiere un filtro DSL/ADSL (no incluido) si tiene servicio de DSL/ADSL.
Cargador
A la toma de corriente
80
Guía Rápida Española
Instalación de la batería/Carga de las baterías
Cargue aproximadamente durante 7 horas.
Confirme que aparezca
“Cargando”.
SOLO baterías Ni-MH recargables
Nota:
L
L
L
UTILICE SOLO baterías de Ni-MH tamaño AAA (R03).
NO utilice baterías Alcalinas, de Manganeso o de Ni-Cd.
Compruebe que las polaridades son las correctas (
S,
T).
Sugerencias de operación
Teclas de función
La unidad incluye teclas de función. Al oprimir una tecla de función, puede seleccionar la función que
aparece directamente encima de ella en la pantalla. Preste atención a la pantalla para ver qué funciones
están asignadas a las teclas de función durante la operación.
Tecla navegadora
Auricular:
−
−
−
−
−
{^}
,
{V}
,
{
<
}
, o
{
>
o
}
: Navegue por diversas listas y elementos.
{V}): Ajuste el volumen del receptor o el altavoz mientras habla.
?
(Volumen: {^}
{
<
}
}
C
: Ver la entrada del directorio telefónico.
{>
REDIAL (Remarcación): Vea la lista de remarcación.
{V} CID (identificador de llamadas): Vea la lista de personas que llamaron.
Unidad base:
−
−
−
{^}
VOL. (Volumen: {^}
: Repetir u omitir mensajes durante la reproducción.
,
{V}
,
{
7
}
o
{
8
}
: Navegue por diversas listas y elementos.
o
{V}): Ajuste el volumen del altavoz mientras habla.
{
7}/{8}
Auricular
Unidad base
Subir volumen
Subir volumen
{^}
{^}
{7}
{8}
{<}
{>}
{V}
{V}
Bajar volumen
Bajar volumen
81
Guía Rápida Española
Cambio de idioma (predeterminado: “Engl i s h”)
Cuando instale las baterías por primera vez, es posible que aparezca
Oprima OFF para salir.
“Dat e a nd t i me Pr e s s SELECT”.
{
}
Idioma de la pantalla (Auricular/Unidad base)
1
2
{
MENU
}
(
11) s
{
r
}
:
“
Es pa ñol
”
s
{
GUARDA
}
Continúe operando su unidad.
Auricular:
Unidad base:
{
OFF
}
{EXIT
}
Idioma de la guía de voz (Auricular)
MENU 112 Es pa ñol
{
}(
s
{r
}:
“
”
s
{
GUARDA
}
s {OFF}
Fecha y hora (Auricular)
1
2
3
4
{
MENU
Introduzca el día, mes y año actuales.
Introduzca la hora y minuto actuales (formato de reloj de 24 horas).
GUARDA OFF
}(1)1
s
{OK}
{
}
s
{
}
Cómo grabar el mensaje de saludo del contestador de llamadas para
la línea terrestre (Auricular)
Si utiliza un mensaje de saludo pregrabado, no es necesario que grabe su propio mensaje de saludo.
1
2
{
MENU
}
(
3
)
2
s
{
r
}
:
“
Sí
”
s
{SELEC.}
Después de que suene un pitido, sostenga el auricular a una distancia aproximada de 20 cm (8
pulgadas) y hable con claridad en el micrófono (máx. de 2 minutos).
3
Oprima
{
ALTO
}
para dejar de grabar.
s
{OFF}
Enlace a celular
Puede usar la unidad para hacer o contestar llamadas usando una línea de teléfono celular. Sus teléfonos
®
celulares deben tener tecnología inalámbrica Bluetooth que sea compatible con este producto. Para
L
Coloque su teléfono celular cerca de la unidad base. Si su teléfono celular está demasiado cerca de la
unidad base durante la llamada celular, es posible que escuche ruido. Para un mejor funcionamiento, le
recomendamos que coloque su teléfono celular de 0.6 m a 3 m (2 pies a 10 pies) de la unidad base.
Línea celular
Proveedor de servicio
del teléfono celular
Marcas registradas
®
L
La marca denominativa y los logotipos de Bluetooth son propiedad de Bluetooth SIG, Inc. y cualquier
uso de dichas marcas por parte de Panasonic Corporation se hace bajo licencia. Todas las demás
marcas comerciales que se identifican en el presente pertenecen a sus respectivos propietarios.
82
Guía Rápida Española
Enlace a celular
Cómo emparejar un teléfono celular con Bluetooth
1
2
3
4
Auricular:
Para CELL 1:
Para CELL 2:
{
MENU
}
(
(
6241
6242
{
MENU
}
L
Después de que el indicador de CELL 1 o CELL 2 comienza a parpadear en la unidad base, el resto
del procedimiento debe completarse en menos de 5 minutos.
Su teléfono celular:
Mientras el indicador de CELL 1 o CELL 2 está parpadeando, siga las instrucciones de su teléfono
celular para entrar al modo de emparejamiento.
L
Dependiendo de su teléfono celular, es posible que le pida que introduzca el NIP de la unidad base
(predeterminado: 0000 ).
Auricular:
Espere a que se emita un pitido largo.
“
”
L
L
Es posible que tarde más de 10 segundos en completar el emparejamiento.
Cuando el indicador de CELL 1 o CELL 2 se ilumina, esto significa que el teléfono celular está
conectado a la unidad base. Ya está listo para hacer llamadas regulares de celular.
{
OFF
}
Nota:
L
Asegúrese de que su teléfono celular está configurado para conectarse a este producto
automáticamente. Consulte las instrucciones de operación de su teléfono celular.
Unidad base: Indicadores CELL 1/CELL 2
Estado
Significado
Encendido
Un teléfono celular está conectado. Listo para hacer o recibir llamadas
celulares.
Parpadeando
−
−
La línea del celular se está usando.
Las entradas del directorio telefónico se están copiando desde un
teléfono celular.
−
−
La unidad base está buscando el teléfono celular emparejado.
Una llamada de celular se pone en espera.
Parpadea rápidamente
Luz apagada
Se está recibiendo una llamada de celular.
−
−
No hay un teléfono celular emparejado con la unidad base.
No hay un teléfono celular conectado a la unidad base.
Auricular: enlace a elementos de la pantalla del celular
t
Se está usando una línea de celular.
L
L
Cuando parpadea: la llamada celular se pone en espera.
Cuando parpadea rápidamente: se está recibiendo una llamada celular.
*1
Un teléfono celular está conectado. Listo para hacer o recibir llamadas celulares.
L
1
2
]
Cuando está apagado: no hay un teléfono celular conectado a la unidad base.
*1 La línea o líneas celulares correspondientes se indican enseguida del elemento.
uv
Está recibiendo una llamada de celular en esa línea.
83
Guía Rápida Española
Enlace a celular
Cómo conectar o desconectar el teléfono celular
Conexión automática al teléfono celular
La unidad se conecta al teléfono celular a intervalos regulares si se pierde la conexión. Consulte las
instrucciones de operación para cambiar el intervalo (predeterminado:
“1
mi n
”).
L
Cuando está usando una línea celular o un audífono con Bluetooth, la unidad base pierde la conexión de
otros dispositivos con Bluetooth (teléfono celular o audífono). Para restablecer la conexión a los
teléfonos celulares automáticamente, deje encendida la conexión automática.
Cómo conectar o desconectar manualmente el teléfono celular (Auricular)
Si no va a utilizar el vínculo del teléfono celular apareado a la función del celular temporalmente (por
ejemplo, si no desea que la unidad timbre cuando su línea de celular reciba una llamada), puede
desconectar su teléfono celular de la unidad base. Si desea usarlo de nuevo, reconecte el teléfono celular
a la unidad base.
L
Aunque haya desconectado un teléfono celular apareado de la unidad base, si lo coloca dentro del
alcance de la unidad base durante el intervalo de conexión automática, es posible que se conecte
automáticamente a la unidad base.
L
Los teléfonos celulares desconectados no se
necesario aparearlos de nuevo con ella.
“De s . Enl a z a r
”
de la unidad base, así que no es
1
Para conectarlo o desconectarlo:
Para CELL 1:
Para CELL 2:
{
MENU
}
(
(
6251 (suena un pitido largo).
6252 (suena un pitido largo).
{
MENU
}
2
{OFF}
Modo exclusivo para la línea celular (si no utiliza la línea terrestre) (Auricular)
Si no utiliza la línea terrestre, configure el modo exclusivo para la línea celular para usar esta unidad en
forma más conveniente.
1
2
{
MENU
Para encenderlo:
Enc e ndi do
Para apagarlo:
Apa ga do
}(157
{r
}
:
“
”
s
{
SELEC.
}
s
{r
}:
“Sí
”
s
{SELEC.}
{r
}
:
“
”
s
{SELEC.
}
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para hacer llamadas de celular
1
Marque el número telefónico.
L
s
{
CEL.
Cuando el modo exclusivo para la línea celular está configurado,
también puede oprimir {C} {s} en lugar de CEL.
}
/
{
}.
L
Cuando solo hay 1 teléfono celular emparejado, la unidad
comienza a marcar.
2
Cuando hay 2 teléfonos celulares emparejados:
: Seleccione el teléfono celular deseado. {SELEC.}
{r
}
s
Para hacer llamadas por la
línea terrestre
Marque el número telefónico. {C} {s}
s
/
Para contestar llamadas
Para colgar
{C}
/{s}
{OFF
}
84
Guía Rápida Española
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para ajustar el volumen del
receptor o del altavoz
Oprima {^}
o
{V} repetidamente mientras habla.
Cómo hacer una llamada
usando la lista de remarcación
1
2
{
>
}
REDIAL : Seleccione el número telefónico deseado.
s
{r}
Para hacer una llamada celular:
Cuando solo hay 1 teléfono celular emparejado:
o
{CEL.}
Cuando hay 2 teléfonos celulares emparejados:
{
CEL.
}
s
}
{
r
}
: Seleccione el teléfono celular deseado.
s
{SELEC.
Para hacer una llamada terrestre:
{C}
Cómo hacer y contestar llamadas (Unidad base)
Para hacer llamadas de celular
Marque el número telefónico.
Cuando el modo exclusivo para la línea celular está configurado,
también puede oprimir {s} en lugar de CELL 1 CELL 2
s
{CELL 1}/{CELL 2}
L
{
}/
{
}.
Para hacer llamadas por la
línea terrestre
Marque el número telefónico.
s
{s}
Para contestar llamadas
Para colgar
{s}
{s}
Para ajustar el volumen del
altavoz
Oprima {^}
o
{V} repetidamente mientras habla.
Cómo hacer una llamada
usando la lista de remarcación
1
2
{
REDIAL
Para hacer una llamada celular:
Para hacer una llamada terrestre: {s}
}
s
{r}: Seleccione el número telefónico deseado.
{
CELL 1
}/
{
CELL 2
}
Para ajustar el volumen del timbre (Auricular)
Para ajustar el volumen del
timbre del auricular (línea de
celular)
1
2
Para CELL 1:
Para CELL 2:
{
MENU
}
(
(
6281
6282
{
MENU
}
{
r
}
: Seleccione el volumen deseado.
MENU 16
: Seleccione el volumen deseado.
s
s
{
GUARDA
}
}
s
s
{
OFF
}
}
Para ajustar el volumen del
timbre del auricular (línea
terrestre)
1
2
{
{
}(
)
r
}
{GUARDA
{OFF
Para ajustar el volumen del timbre (Unidad base)
Para ajustar el volumen del
timbre de la unidad base (línea
celular)
1
2
Para CELL 1:
Para CELL 2:
{
MENU
}
(
(
6281
6282
{
MENU
}
{
r
}
: Seleccione el volumen deseado.
MENU 16
: Seleccione el volumen deseado.
s
s
{
GUARDA
}
}
s
s
{
EXIT
}
}
Para ajustar el volumen del
timbre de la unidad base (línea
terrestre)
1
2
{
{
}(
)
r
}
{GUARDA
{EXIT
85
Guía Rápida Española
Operaciones básicas
Directorio telefónico compartido (Auricular)
Para añadir entradas
1
2
3
4
{
<
}
:
C
s
{
MENU
}
{r
}
“Agr ega r Ent . Nue va
”
s
{SELEC.}
Introduzca el nombre de la persona (máx. 16 caracteres).
Introduzca el número telefónico de la persona (máx. 24 dígitos).
s
{OK}
s
{
OK
: Seleccione el grupo deseado.
OFF
}
5
{r
}
s
{SELEC.
}
2 veces
s
{
}
Para hacer llamadas
1
2
{
<
}
C
s
{r}: Seleccione la entrada deseada.
Para hacer una llamada celular:
Cuando solo 1 teléfono celular está emparejado:
o
{CEL.}
Cuando 2 teléfonos celulares están emparejados:
{
CEL.
}
s
}
{
r
}
: Seleccione el teléfono celular deseado.
s
{SELEC.
Para hacer una llamada terrestre:
{C}
Directorio telefónico compartido (Unidad base)
Para hacer llamadas
1
2
{
C
}
s
{
r
}
: Seleccione la entrada deseada.
Para hacer una llamada celular: CELL 1
Para hacer una llamada terrestre: {s}
{
}/{CELL 2}
Contestador de llamadas de la línea terrestre (Unidad base)
Contestador encendido/
apagado
Oprima
de llamadas.
{ANSWER ON/OFF} para encender y apagar el contestador
Para escuchar mensajes
{6
}
(PLAY)
Contestador de llamadas de la línea terrestre (Auricular)
Para escuchar mensajes Para escuchar mensajes nuevos:
{
MENU 323
Para escuchar todos los mensajes:
MENU 324
}(
{
}(
86
Guía Rápida Española
Cómo usar dispositivos Bluetooth
Copiado de entradas del directorio telefónico desde un teléfono celular con Bluetooth (transferencia
del directorio telefónico)
Puede copiar entradas del directorio telefónico desde los teléfonos celulares emparejados o desde otros
teléfonos celulares (no emparejados) al directorio telefónico compartido de la unidad.
1
2
Auricular:
Auricular:
{MENU}(618
Para copiar desde teléfonos celulares emparejados:
: Seleccione el teléfono celular deseado. SELEC.
{
r
L
}
s
{
}
Los elementos copiados se almacenan en el grupo (
el teléfono celular.
“
Ce l .
1
”
o
“Ce l .
2
”) en el que está emparejado
Para copiar desde otros teléfonos celulares (no emparejados):
Ot r o c e l ul a r SELEC. : Seleccione el grupo al que desea copiar.
{r
}:
“
”
s
{
}
s
{r
}
s
{SELEC.}
3
Cuando se muestre “Tr a ns f . da t os de l di r e c t or i o de l c e l ul a r ” : Vaya al paso 4.
Cuando aparezca el menú “Se l e c . modo” :
{
“
“
r
}
: Seleccione
Aut o : Descargue todas las entradas del teléfono celular automáticamente. Vaya al paso 5.
Manua l : Copie las entradas que seleccionó.
El menú Se l e c . modo aparece solo cuando el teléfono celular soporta PBAP (Perfil de Acceso a
Directorio Telefónico) para la conexión Bluetooth.
“
Aut o
”
o
“
Ma nua l
”
.
s
{SELEC.}
”
”
L
“
”
4
5
Teléfono celular:
Siga las instrucciones de su teléfono celular para copiar las entradas del directorio telefónico.
L
Para otros teléfonos celulares (no emparejados), necesita buscar y seleccionar la unidad base. Es
posible que requiera el NIP (predeterminado: 0000 ) de la unidad base.
Las entradas que se están copiando aparecen en el auricular.
“
”
L
Auricular:
Espere a que aparezca
“Compl e t o
”.
s
{OFF}
87
Guía Rápida Española
Cómo usar dispositivos Bluetooth
Cómo usar un audífono Bluetooth (opcional) para llamadas por la línea terrestre
Al emparejar un audífono Bluetooth con la unidad base, podrá tener conversaciones inalámbricas a manos
libres para llamadas terrestres.
L
La conexión del audífono con Bluetooth no está disponible mientras alguien se encuentra usando la línea
celular.
Cómo emparejar un audífono con la unidad base
1
Su audífono:
Configure su audífono en modo de emparejamiento.
Aparee usando el auricular.
L
Consulte las instrucciones de operación de su audífono.
Auricular:
MENU
2
{
}(621
Emparejamiento
3
4
Si el NIP de su audífono es “0000”, vaya al paso 4.
Si el NIP de su audífono es diferente a “0000”, pulse
audífono.
{
BORRA
}
y después introduzca el NIP de su
L
Por lo general, el NIP predeterminado es
audífono.
“0000
”. Consulte las instrucciones de operación del
Oprima
{OK}, y después espere a que se emita un pitido largo.
s
{OFF}
L
Cuando aparezca
en la unidad base, el audífono estará listo para usarse.
Cómo operar un audífono inalámbrico con Bluetooth usando una línea terrestre
Consulte las instrucciones de operación de su audífono para ver cómo funciona.
N
Cómo contestar llamadas de la línea terrestre con su audífono
Para contestar una llamada de línea terrestre, encienda su audífono. Para ello, consulte las instrucciones
de operación de su audífono.
Cuando termine de hablar, apague su audífono. Para ello, consulte las instrucciones de operación de su
audífono.
L
Si no puede colgar la llamada usando su auricular, oprima {s} 2 veces en la unidad base.
N
Cómo cambiar entre la unidad base y su audífono
Puede cambiar entre la unidad base y su audífono:
−
−
−
durante una llamada por una línea terrestre con el altavoz de la unidad base.
durante una llamada de intercomunicador entre la unidad base y el auricular.
mientras escucha los mensajes grabados en el contestador de llamadas de la unidad base.
N
N
Para cambiar a su audífono:
Oprima en la unidad base.
Para cambiar a la unidad base:
{W}
Oprima {s} en la unidad base.
88
Guía Rápida Española
Preguntas frecuentes
Pregunta
Causa y solución
¿Por qué aparece
_
?
L
L
El auricular está demasiado lejos de la unidad base. Acérquelo.
El adaptador para corriente de la unidad base no está conectado
correctamente. Conecte de nuevo el adaptador para corriente a la unidad
base.
L
El auricular no está registrado en la unidad base. Regístrelo.
1
2
Auricular:
Unidad base: Oprima y mantenga oprimido
aproximadamente 5 segundos hasta que suene el tono de registro.
{MENU}(13)
{
LOCATOR} durante
3
Auricular: Oprima {OK}, y después espere hasta que suene un
pitido largo.
¿Por qué no es posible
emparejar un teléfono celular
con la unidad base?
L
L
Dependiendo de la compatibilidad del teléfono celular, es posible que no
pueda emparejarlo con la unidad base. Para obtener más información, visite
Confirme que la función de Bluetooth de su teléfono celular esté encendida.
Es posible que necesite encender esta función dependiendo de su teléfono
celular.
¿Por qué no se escucha el
tono de marcación? (línea
celular)
L
L
Asegúrese de que la luz indicadora de CELL 1 o CELL 2 se ilumine y de
que el teléfono celular esté conectado a la unidad base.
El teléfono celular no se ha emparejado con la unidad base. Empareje el
teléfono celular.
¿Cómo se incrementa el nivel
de volumen del auricular?
L
Oprima la tecla de volumen {^} repetidamente mientras habla.
¿Por qué hay ruido o se corta
la conversación?
L
L
Trate de reubicar la unidad base de forma que se minimice la distancia al
auricular.
Si ocurre el mismo problema aunque el auricular se encuentre enseguida
de la unidad base, llame a servicio a clientes de Panasonic al
1-800-211-PANA (1-800-211-7262).
¿Es posible añadir otro
auricular accesorio a mi
unidad base?
L
L
Sí, puede añadir hasta 6 auriculares (incluyendo los que se venden con
su unidad base) a una sola unidad base.
Para adquirir auriculares accesorios adicionales (KX-TGA680), visite
o llame al 1-800-332-5368. Los usuarios TTY (usuarios con
impedimentos auditivos o del habla) pueden llamar al 1-866-605-1277.
¿Es posible mantener
cargando las baterías todo el
tiempo?
L
L
Puede dejar el auricular en la unidad base o el cargador en cualquier
momento. Esto no daña las baterías.
¿Cómo se contestan las
llamadas en espera (segunda
llamada)?
Oprima {CALL WAIT} cuando escuche el tono de llamada en espera.
Para obtener más información acerca del registro, visite
http://www.panasonic.com/RegisterYourHandset (solo inglés)
89
Appendix
Customer services
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at: 1-800-211-PANA (1-800-211-7262),
Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST.
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and
Personal Checks.)
TTY users (hearing or speech impaired users) can call 1-866-605-1277.
90
Appendix
Warranty (For United States and Puerto Rico)
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Telephone Products
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length
of the period indicated on the chart below, which starts with the date of original purchase
(“Limited Warranty period”), at its option either (a) repair your product with new or
refurbished parts, or (b) replace it with a new or a refurbished product. The decision to
repair or replace will be made by the warrantor.
Parts
Labor
One (1) Year
One (1) Year
During the “Labor” Limited Warranty period there will be no charge for labor. During the
“Parts” Limited Warranty period, there will be no charge for parts. You must mail-in your
product prepaid during the Limited Warranty period. This Limited Warranty excludes both
parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty
only applies to products purchased and serviced in the United States or Puerto Rico. This
Limited Warranty is extended only to the original purchaser and only covers products
purchased as new.
Ship-In Service
For assistance in the continental United States and Puerto Rico in obtaining repairs please
ship the product prepaid to:
Panasonic Exchange Center,
4900 George McVay Drive, Suite B Door #12, McAllen, TX 78503
Online Repair Request
To submit a new repair and for quick repair status visit our web site at
When shipping the unit carefully pack in a padded shipping carton, include all
accessories, and send it prepaid. Include a letter detailing the complaint, a return
address and provide a day time phone number where you can be reached. P.O. Boxes
are not acceptable. Keep the tracking number for your records. A copy of valid registered
receipt is required under the 1 year parts and labor Limited Warranty.
For Limited Warranty service for headsets if a headset is included with this
product please follow instructions above.
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,
AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH
PROOF OF PURCHASE.
91
Appendix
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or
rental use of the product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this
excludes damages for lost time, lost calls or messages, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the servicer. The items listed are
not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions may not
apply to you.
This Limited Warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or after the
Limited Warranty period, you may contact your dealer or Service Center. If the problem is
not handled to your satisfaction, then write to the warrantor’s Consumer Affairs
Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
When you ship the product
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom.
L Send the unit to Panasonic Exchange Center, prepaid and adequately insured.
L Do not send your unit to Panasonic Corporation of North America listed on the back
cover or to executive or regional sales offices. These locations do not repair consumer
products.
92
Index
Display
Contrast: 40, 43
Index
E
#
3-way conference: 24, 30
A
Alarm: 44
F
G
H
Call screening: 56
Deregistration: 47
Locator: 65
Number of rings: 61
Ring count: 61
Hold: 22, 29
Link to cell
I
K
L
Area code: 20
Connection: 19
PIN: 20
operation): 25
B
C
Cellular phone (Link to cell): 17
Headset: 53
M
Call block: 45
Caller ID service: 48
Caller list: 49
N
P
R
Pairing: 17
S
T
Silent mode: 44
Talking Caller ID: 48
Time adjustment: 40
TTY: 90
D
93
Notes
95
IMPORTANT!
If your product is not working properly. . .
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the Operating Instructions.
L
FAQ and troubleshooting hints are available.
For your future reference
We recommend keeping a record of the following information to assist with any repair under
warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
One Panasonic Way, Secaucus, New Jersey 07094
© Panasonic System Networks Co., Ltd. 2012
Printed in China
*PNQX5764ZA*
*PNQX5764ZA*
PNQX5764ZA TT1212MG1122 (E)
|