OKI 70037401,
70037501 & 70037601
Memory DIMM
Installation Instructions
Getting Started
The printers have four sockets for memory DIMM boards. You can expand the
printer's memory up to 1 GB by installing four 256-MB DIMMs. To achieve the
1 GB memory in most models, you will need to replace the DIMM(s) provided
with 256 MB DIMMs:
Model
Memory Provided
64 MB
C7200
C7200n
C7400n
C7400dxn
C9200
64 MB
128 MB
256 MB
128 MB
C9200n
C9200dxn
C9400dxn
128 MB
192 MB (64 + 128 MB)
320 MB (64 + 256 MB)
Caution!
Circuit boards can be damaged by static electricity and rough handling. Keep
board in packaging until you're ready to install it. DIMMs are sensitive to static
electricity. To avoid damage, ground yourself before handling DIMMs.
3
Prepare the Printer
1 Turn the printer off and unplug the power cord.
2 Detach the interface cable from the printer.
3 Remove and save the thumbscrew at the top and bottom which hold the
control board in place.
C7000 Series
C9000 Series
4
4 Grasp the control board, loosen it by wiggling it back and forth, and slide it
out of the printer.
C7000 Series
C9000 Series
5
Install the DIMM(s)
1 Locate the DIMM sockets (1) on the control board.
DIMMs must be installed in the socket number sequence 1-3-2-4.
!
Socket numbers (1) are located at the end of the sockets nearest the
front of the board.
6
2 Push out the white lock tabs at either end of the DIMM socket.
Caution!
Circuit boards can be damaged by static electricity and rough handling. To
avoid damage, ground yourself before handling DIMMs.
3 Remove the DIMM from its shipping package.
4 Align the DIMM with the narrow strip (1) on its metallic contact edge toward
the front of the control board, then carefully insert the DIMM in the socket.
Press down firmly, until you feel the board engage the connector, then make
sure the white tabs come up to lock the DIMM in place.
5 Repeat steps 2 through 4 for each DIMM being installed.
7
Complete the Installation
1 Align the bottom of the control board with the track in the printer and slide it
back into place.
C7000 Series
C9000 Series
8
2 Reinstall the thumbscrews at the top and bottom of the board.
C7000 Series
C9000 Series
3 Reattach the computer interface cable.
4 Plug the power cord into the power outlet and turn the printer on.
9
Check for Proper Installation
Generate a MenuMap printout and check to be sure that the DIMMs are
properly installed:
1 Press MENU once or twice until INFORMATION MENU appears on the
display.
2 Press SELECT.
PRINT MENU MAP appears on the display.
3 Press SELECT.
The MenuMap prints.
4 Check the top of the MenuMap printout to verify that the DIMMs you
installed are listed (they will appear as DIMMs).
If the DIMM is not listed at the top of the MenuMap printout, remove the
!
board and make sure the memory DIMM is firmly in place, then print the
MenuMap again.
10
Change the Memory Setting
in the Driver(s)
Windows® Adobe® PostScript® Driver
1 Click Start
Settings
Printers.
The Printers dialog box opens.
2 Right click the appropriate OKI (C7200, C7400, C9200 or C9400) PostScript
driver icon, then click Properties.
3 Windows 2000 & NT 4.0:
a Click the Device Settings tab.
b Scroll down to Installable Options and click Memory Configuration.
c Under Change ‘Memory Configuration’ Setting, click the total memory
installed (original plus the memory you just installed).
Windows Me, 98 & 95
a Click the Device Options tab.
b Click Memory Configuration.
c Under Change setting for: Memory Configuration, click the total
memory installed (original plus the memory you just installed).
4 Click OK, then close the Printers dialog box.
Windows PCL Driver
No changes are necessary in the PCL driver.
11
Macintosh® Driver
1 Activate Chooser from the Apple menu.
2 Select LaserWriter 8.
3 Click Printer
Setup.
4 Click Configure.
5 Change the Memory Configuration setting to match the total DIMM
memory installed (original plus the new memory you just installed):
6 Click OK twice, then close Chooser.
12
Limited Warranty:
United States & Canada
Oki Data Americas, Inc. (Oki Data) warrants this OPTION to be free from defect
in material and workmanship and will remedy any such defect according to the
terms of this Limited Warranty.
Oki Data will repair (or at its option, replace) at no charge, any defective part(s)
of the OPTION for one (1) year from the date of purchase. This Limited
Warranty extends to the original purchaser only.
To make request or claim for service under this Limited Warranty the original
purchaser must return the Oki Data product, shipping prepaid, in the original
shipping container or equivalent, to Oki Data or an authorized Oki Data service
center and assume the risk of loss or damage in transit. A written receipt for the
product, showing the date of purchase, dealer’s name, and item purchased must
accompany any request or claim for work to be performed under this Limited
Warranty.
This Limited Warranty shall not apply if the product has been damaged due to
abuse, misuse, misapplication, accident, or as a result of service or modification
by any other than an authorized Oki Data service center.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE ON THE
FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
13
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE
WARRANTY PERIOD DESCRIBED ABOVE OF ONE (1) YEAR. Some states
do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you.
OKI DATA SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS
ARISING FROM THE USE OF THIS PRODUCT. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above
exclusion may not apply to you.
Additional information on obtaining service under this Limited Warranty is
available by contacting the Oki Data dealer from whom the product was
purchased, by contacting Oki Data directly at 1-800-OKI-DATA (U.S. and
Canada), or by contacting one of the service depots listed on the next page.
This Limited Warranty applies to this Oki Data Option. However, the procedure
for obtaining service may vary outside the continental United States. Contact
your Oki Data dealer for such warranty service information.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
For the most comprehensive, up-to-date listing of Oki Data authorized Service
1-800-OKI-DATA (1-800-654-3282).
14
Oki Data Service Depot Information
UNITED STATES
CANADA
Oki Data Americas, Inc.
2020 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
Oki Data Americas, Inc.
2735 Matheson Blvd. East, Unit 1
Mississauga, Ontario
Canada L4W 4MB
Tel: 1-800-654-3282
Tel: 800-654-3282
Fax: 1-856-222-5247
Fax: 905-238-4427
MEXICO
BRAZIL
Oki Data de Mexico, S.A. de C.V.
Mariano Escobedo No. 748 - 8 Piso
Col Anzures, e.p. 11590
Mexico, DF
Oki Data do Brasil, Ltda.
Rua Alexandre Dumas, 2220 - 8 andar
Chácara Sto Antonio
São Paulo 04717-004, Brasil
Tel: (525) 263-8780
Tel: 55 11-3444-3500
Fax: (525) 263-8785
Fax: 55 11-3444-3501
15
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (800) 654-3282
FAX: (856) 222-5320
58346602
|