Meridian Digital
Telephones
M3901
M3902
M3903
M3904
User Guide
Enterprise Voice Solutions Customer Documentation
M3900 Series Meridian Digital Telephone
M3901 ................................................................................................. 1
M3902 ................................................................................................. 2
M3903 ................................................................................................. 3
M3904 ................................................................................................. 4
Your Telephone’s Controls
Terms you should know
Your telephone call features
10
Use the Predial feature ......................................................................... 14
Make a call
Auto Dial ............................................................................................ 16
Use Speed Call (M3902) ...................................................................... 20
Make a System Speed Call ................................................................... 22
Use Hot Line ........................................................................................ 22
Make an Intercom call .......................................................................... 23
Answer a call
While on an active call
Place a call on Hold ............................................................................. 25
Transfer a call (M3902) ....................................................................... 25
Transfer a call (M3903 and M3904) ..................................................... 26
Use Timed Reminder Recall ................................................................... 27
Use Attendant Recall ............................................................................ 28
Use Call Park (M3902) ......................................................................... 28
i
Contents
Use Call Park (M3903 and M3904) ......................................................30
Trace a Malicious call ...........................................................................35
Incoming calls
36
Use Call Pickup ....................................................................................37
Use Call Waiting .................................................................................38
While you are away from your desk
Forward calls (M3903 and M3904) ......................................................40
Secure your telephone
Talk with more than one person
Set up a Conference call (M3903 and M3904) ......................................46
Join a call (M3902) ..............................................................................47
Selectable Conferee Display and Disconnect ..........................................48
Use Group Call ....................................................................................49
Work without interruption
Additional Call Features
Auto Dial Transfer Feature ....................................................................52
Use the buzz signal ..............................................................................52
Call Page to make an announcement .....................................................53
Centrex/Exchange Switch Hook Flash ...................................................53
Charge or Force Charge a call (M3902) ................................................54
Charge or Force Charge a call (M3903 and M3904) .............................56
ii
Draft 0.01
Forced Camp-on .................................................................................. 59
Station Camp-on ................................................................................. 60
Override Feature ................................................................................. 61
Privacy Release .................................................................................... 62
Radio Paging ...................................................................................... 63
Voice Call ........................................................................................... 65
Hospitality features
Maid Identification ............................................................................... 70
Room Status ........................................................................................ 71
Meridian SL-100 CLASS Features
Automatic Callback .............................................................................. 73
Automatic Recall .................................................................................. 74
Customer Originated Trace ................................................................... 75
Selective Call Forward .......................................................................... 76
Telephone display
77
M3902 display .................................................................................... 77
M3903 display .................................................................................... 77
M3904 display .................................................................................... 78
Options List
Select a language ................................................................................ 80
Change a Feature Key label (M3903 and M3904) ................................. 82
Adjust Screen contrast .......................................................................... 84
Adjust volume ...................................................................................... 84
Choose Ring type ................................................................................. 85
Select Call Log options ......................................................................... 85
Use Live dial pad ................................................................................. 86
iii
Contents
Set up area code .................................................................................86
Enable Call timer .................................................................................87
Enable Key click ...................................................................................87
Activate Headset port external alerter ....................................................88
Use Call indicator light .........................................................................88
Display diagnostics ..............................................................................89
Call Log and Personal Directory display
and navigation
Access your Callers List or Redial List (M3903) .......................................91
Call Log and Personal Directory password protection
(M3903 and M3904) ...........................................................................94
Call Log
Access and use the Callers List (M3903) ................................................97
Access and use the Callers List (M3904) ................................................98
Redial List
100
Access and use the Redial List (M3903) ...............................................100
Access and use the Redial List (M3904) ...............................................101
iv
Draft 0.01
Access and use the Personal Directory
Add an incoming call ......................................................................... 104
Delete your Personal Directory ............................................................ 107
Use Card View .................................................................................. 108
Search for an entry ............................................................................ 109
Copy a number from the Redial List ..................................................... 109
Set-to-Set Messaging
Corporate Directory
Virtual Office
M3901 Feature Operation
Use Auto Dial .................................................................................... 122
Use Speed Call .................................................................................. 122
Use Call Transfer ............................................................................... 123
Set up a Conference call ..................................................................... 124
Activate Ring Again ........................................................................... 125
Make a call ....................................................................................... 126
Receive a call .................................................................................... 126
Feature Activation Indicator ................................................................ 126
Message Waiting and Call Status Indicator .......................................... 126
v
Contents
Accessories for the M3900 Series telephones
External Alerter and Recorder Interface ................................................127
Headsets ...........................................................................................128
Key-based Expansion Module .............................................................128
Personal Directory PC Utility ................................................................128
Meridian 1 Flexible Feature Codes (FFCs)
Meridian SL-100 Feature Access Codes (FACs)
Index
129
130
131
vi
Draft 0.01
M3900 Series Meridian Digital Telephone
M3900 Series Meridian Digital Telephone
There are five models in the M3900 Series Meridian Digital Telephone Portfolio.
This document describes the M3901, M3902, M3903, and M3904 features and
how to use them. The M3902, M3903, and M3904 are described in the main
portion of this document. The M3901 is described in a separate section of this
document. For information on the M3905 refer to the M3905 Call Center
Meridian Digital Telephone User Guide.
M3901
The M3901 has one Line (DN) Key and can be programmed with up to five
features.
M3901 telephone
Feature Activation Indicator
Feature
Goodbye
Hold
Line (DN)
Message/Call Status/
Incoming Call Indicator
Feature Card
Volume Control Bar
553-8966
Note: The Meridian SL-100 configures the Line (DN) Key as a Directory Number
only.
1
M3900 Series Meridian Digital Telephone
M3902
The M3902 has one Line (DN) Key, and three Programmable Soft Keys
(self-labeled).
M3902 telephone
LCD Indicator
Message Waiting Light/
Incoming Call Indicator
One Line (DN)
Programmable
Soft Keys
(self-labeled)
Options
Message
Transfer
Hold
LED
Handsfree Key
Goodbye
eys
Navigation K
Volume Control Bar
LED
553-8624
Mute
2
M3900 Series Meridian Digital Telephone
M3903
The M3903 has two Programmable Line (DN)/Feature Keys (self-labeled) with
two features or lines configured on each key. It also has four Context Sensitive Soft
Keys (self-labeled).
M3903 telephone
LCD Display
Goodbye
Hold
Message Waiting Light/
Incoming Call Indicator
Programmable Line (DN)/
Feature Keys (self-labeled)
Context Sensitive
Soft Keys (self-labeled)
Copy
LED
Handsfree Key
Fixed Feature Keys
Shift
Applications
Navigation Keys
Volume Control Bar
LED
Headset
Mute
Call Log
Options
Message
Quit
553-8625B
3
M3900 Series Meridian Digital Telephone
M3904
The M3904, has six Programmable Line (DN)/Feature Keys (self-labeled), with
two features or lines configured on each key. It also has four Context Sensitive Soft
Keys (self-labeled).
M3904 telephone
LCD Display
Goodbye
Hold
Message Waiting Light/
Incoming Call Indicator
Programmable Line (DN)/
Feature Keys (self-labeled)
Context Sensitive
Soft Keys (self-labeled)
LED
Handsfree Key
Fixed Feature Keys
Shift
Copy
Volume Control Bar
Applications
LED
Headset
Navigation Keys
Directory/Log
Mute
Options
Quit
Message
553-8626B
4
Your Telephone’s Controls
Your Telephone’s Controls
Use the Volume Control Bar to control the
volume of the handset, headset, speaker,
ringer, and handsfree. Increase the volume
by pressing the right side of the bar. Lower
it by pressing the left side.
You can terminate an active call by
pressing the Goodbye Key. The Goodbye
Key is useful for disconnecting a handsfree
call.
Goodbye
/
/
Press the Headset Key to answer a call on
a headset (connected to the headset jack)
or to switch a call from handset or
handsfree to the headset.
Headset
A steady LCD indicator appearing beside
a Line (DN) Key means that the feature or
line is active. A flashing LCD indicator
means the line is on hold or the feature is
being programmed.
2498
By pressing the Hold Key, you can put an
active call on hold. Return to the caller by
pressing the DN Key beside the flashing
indicator.
Hold
/
/
The Handsfree Key allows you to activate
the handsfree (M3902, M3903, and
M3904) and Group listening features
(M3903 and M3904). The speaker LED
lights to indicate handsfree is active, the
LED flashes to indicate Group listening is
active.
The Mute Key allows you to listen to a
conversation without being heard. This is
especially useful when you only want to
listen on a conference call. Push the Mute
Key again to return to a two way
Mute
conversation. The Mute Key applies to
handsfree, handset, and headset
microphones. The Mute LED flashes when
the Mute option is in use.
5
Your Telephone’s Controls
The Navigation Keys allow you to scroll
through Menus and lists on the display.
The Copy Key copies incoming or outgoing
call numbers into the Personal Directory on
the M3904.
Copy
/
The Quit Key ends an active application.
Pressing the Quit Key does not affect the
status of calls currently on your telephone.
Quit
Note: If you press the Quit Key before the
Done Key you exit without saving changes.
Press the Done Key to exit and save
changes.
The Options Key allows you to access and
modify telephone options.
Options
/
/
/
The Message Key provides access to your
voice messaging system.
Message
The Directory/Log Key (M3904) allows
you to access your Personal Directory
(100 entries), Callers List (last 100
incoming calls) and, Redial list (last 20
outgoing calls).
Directory/Log
The Call Log Key (M3903) allows you to
access the Callers List (last 10 incoming
calls), and the Redial list (last 5 outgoing
calls).
Call Log
/
/
The Applications Key allows you to access
additional features that may be provided
by your network administrator (M3903
and M3904).
Applications
The Shift Key allows you to access the
second layer of the Programmable
Line/Feature Keys (M3903 and M3904).
Shift
Line
/
/
The Line/Directory Number (DN) Key on
the M3901 allows you to access dial tone.
6
Your Telephone’s Controls
Line/Directory Number (DN) Key(s) are
assigned to your M3902, M3903, or
M3904. They can be a Primary Directory
Number (PDN) or secondary DN(s) on the
M3903 and M3904.
2496
2498
On the M3903 and M3904, the lower
right hand Line/Feature Key on the first
layer is your Primary Directory Number
(PDN) Key. When you pick up the handset,
the line associated with this key is ready
for you to make a call.
Note: Although you have only one PDN,
you can have additional Line/Directory
Number (DN) Key(s) assigned to your
M3903 or M3904 telephone.
The Dial Key is used to dial numbers stored
in the Directory and Callers List (M3903
and M3904). The Dial Key accesses the
Primary Directory Number (PDN) Key to
make a call.
Dial
The More Key allows you to access
additional layers of Context Sensitive Soft
Keys.
More...
Programmable Soft Keys (M3902) or
Context Sensitive Soft Keys (M3903 and
M3904) are configured for various
features and functions on the M3900
Series telephones. The Soft Keys are
located below the display area. These keys
have an LCD label above them that
changes based on available features,
functions, or the active application.
Trans
Example:
Programmable Line (DN)/Feature Keys
(M3903 or M3904) are located at the
sides of the upper display area. Once
configured, these Programmable Line
(DN)/Feature Keys provide one-touch
feature activation. An status icon indicates
call or feature status.
CallWait
7
Terms you should know
Terms you should know
Attendant — The attendant is a telephone operator in your organization.
Call Log— The Call Log can be configured to store either unanswered or all
incoming calls. These entries can be accessed through your directory menu.
Call party information—When your telephone rings, the display shows Call Party
Name Display (CPND) information. The system must have CPND enabled. The
display shows the phone number and name, if available, of the incoming call.
Card View — The Card View displays a directory entry name and telephone
number.
Context Sensitive Soft Keys — The four keys located directly below the display on
the M3903 and M3904 are referred to as Context Sensitive Soft Keys. The label
and function of each key changes depending upon the available features or the
active application.
Copy Key — The Copy Key allows the M3904 to copy information from an
application, like Corporate Directory, or from the Callers List or Redial List to the
Personal Directory.
Date/time display feature —The Date/time display feature shows the month and
date while the telephone is in an idle state.
Directory Number (DN) — The Directory Number (DN) is a telephone number
that consists of one to seven digits. The DN is commonly known as an extension
number.
Feature Access Codes (FACs)— Feature Access Codes (FACs) allow you to access
features for which you do not have a fixed or soft feature key. Feature Access
Codes are applicable to the Meridian SL-100 system only. For your convenience,
the FACs for your system can be printed on a page located at the back of this
guide.
Flexible Feature Codes (FFCs) —Flexible Feature Codes (FFCs) allow you to
access features for which you do not have a fixed or soft feature key. Flexible
Feature Codes are applicable to the Meridian 1 system only. For your
convenience, the FFCs for your system can be printed on a page located at the
back of this guide.
Fixed Keys—The Fixed Keys are the hard labeled keys on your telephone.
Indicator —An indicator is an LCD or LED that displays the current status of a
feature by its state; flashing, winking, steady on, or off.
Information screen—The Information screen displays call activity, lists, prompts,
and status of calls.
Interrupted dial tone—Interrupted dial tone is a broken or pulsed dial tone, heard
when you access some of the features on your telephone.
8
Terms you should know
Meridian 1, Meridian SL-100— The Meridian 1 or the Meridian SL-100 is your
office communications system.
More... — The More Key allows access to the multiple layers of Programmable
Soft Keys. These keys are the keys located below the display on your telephone.
Off-hook — Off-hook is a term used to indicate that the telephone is active and
ready to make a call. Your telephone’s status changes to off-hook when you pick
up the handset or press a Line (DN) Key.
Paging tone—Paging tone is a special tone heard when using the Radio Paging
feature. You hear two beeps followed by dial tone.
Personal Directory —The Personal Directory stores entries by name and phone
number.
Primary Directory Number— The Primary Directory Number is the main
extension number on your telephone. It is accessed through the Primary Directory
Number (PDN) Key.
Private Line — Private Line can be assigned to your telephone. With this line, you
can reach an outside number without dialing a code to access an outside line.
Internal extensions cannot be dialed from a private line.
Redial List— The Redial List is accessed through the Call Log Key on the M3903
and through the Directory/Log Key on the M3904. It lists outgoing numbers for
calls that have been made from your telephone.
Ringback/ring tone— Ringback/ring tone is the sound you hear when a call you
have made is ringing at its destination.
Shared Directory Number — A shared Directory Number is a DN (extension)
that is shared by two or more telephones. This is also known as a Multiple
Appearance DN (MADN).
Special dial tone— The special dial tone refers to three consecutive short tones
followed by steady dial tone that you hear when accessing some of your
telephone features.
Switch hook — The switch hook is the button which the handset presses down,
disconnecting your call, when you replace the handset. When lifted, the handset
releases the switch hook and you either answer an incoming call or you receive
dial tone indicating that your telephone is ready to make a call.
9
Your telephone call features
Your telephone call features
Your network administrator assigns features to your programmable feature keys.
Whenever this guide describes a procedure that requires special codes ask your
network administrator to provide these to you.
To access a feature, you press a Feature Key, or enter a Flexible Feature Code
(FFC) for the Meridian 1 or a Feature Access Code (FAC) for the Meridian SL-100.
Your network administrator supplies you with the Flexible Feature Codes or
Feature Access Codes for your system.
Note: In order to use a feature described in this section, your system software must
support the feature and the feature must be assigned to your telephone. Check
with your network administrator for more details.
Use handsfree calling (M3902, M3903, and M3904)
If your telephone is an M3902, M3903, or M3904 you can use the built-in
microphone and speaker instead of the handset to make of receive a handsfree
call. While on an active call, you can switch between Handset and Handsfree
mode.
To answer a call with handsfree:
Press the Handsfree Key. You are now
on a handsfree call.
To discontinue a handsfree call:
Press the Goodbye Key to end the call.
Goodbye
/
To mute a handsfree call:
1. Press the Mute Key. The LED indicator
Mute
/
/
flashes.
2. Press the Mute Key again to return to a
Mute
two way handsfree conversation.
To switch from handsfree to handset:
1. Lift the handset to switch from
handsfree to handset.
10
Your telephone call features
To switch from handset to handsfree:
1. Press the Handsfree Key.
2. Replace the handset.
To use a headset:
Connect a headset to the headset jack
or the handset jack depending on the
headset type and the telephone you
are using.
Press the Headset Key (M3903 and
M3904). For the M3902 read the
instructions that came with your
recommended headset.
Headset
/
Note 1: Refer to “Set On-hook default
path” on page 89 for information on how
to configure your telephone for use with a
headset.
Note 2: Refer to “Headsets” on page 128
for information on recommended headset
types for your telephone. This section also
provides information on setting and
adjusting the volume for both amplified and
unamplified headsets.
To switch from handsfree to headset:
Connect headset or put headset on.
Press the Headset Key (M3903 and
M3904). For the M3902 read the
instructions for the headset you are
using.
Headset
/
11
Your telephone call features
Activate/deactivate Group listening
The Group listening feature allows others to listen to a call through the speaker
while you are speaking through the handset. This feature must be enabled by your
network administrator.
To activate the Group listening
option:
1. Press the Options Key.
Options
/
2. Use the Navigation Keys to scroll
through the Options List and highlight
Group listening.
Group listening
3. Press the Select Key.
Select
4. Press the On Key.
On
5. Press the Done Key to save changes.
6. Press the Quit Key to exit.
Done
Quit
To use Group listening while you are
on a call:
Press the Handsfree Key. Everyone will
hear the caller over the speaker, but
the caller will only hear what is picked
up by the handset.
Note: You must let the caller know when
others are listening to the conversation.
This feature does not provide a tone to
inform the party on the other end of the
call that the conversation is being
monitored.
12
Your telephone call features
To deactivate the Group listening
option:
1. Press the Options Key.
Options
/
2. Use the Navigation Keys to scroll
through the Options List and highlight
Group listening.
Group listening
Select
3. Press the Select Key.
4. Press the Off Key to turn Group
Off
listening off.
5. Press the Done Key to save changes.
6. Press the Quit Key to exit.
Done
Quit
To mute a group listening call:
1. Press the Mute Key. The LED flashes.
Mute
/
/
2. Press the Mute Key again to return to
Mute
two way conversation.
To switch from Group listening to
handsfree:
Press the Handsfree Key.
13
Your telephone call features
Use the Predial feature
The Predial feature allows you to enter and preview a number containg up to
31 digits and make corrections before you dial the number.
To use Predial:
1. Replace the handset, if it is off the
cradle.
2. Dial the number.
Note 1: Press the Pause Key to insert a
1.5 second pause in the dialing string.
Note 2: If you are calling an external or
long distance number, be sure that the
appropriate access codes are included.
3. Press a Line (DN) Key to receive dial
2637
tone.
The displayed predialed number is
automatically dialed.
4. Lift the handset when the called party
answers or, if on handsfree, begin to
talk.
Note: You cannot use the Predial feature if
the Live dial pad feature is active.
14
Make a call
Make a call
This section describes features that you can use when you make a call. There are
several ways to make a call from your M3900 Series Meridian Digital Telephone.
To make a call from your telephone, use the features described in this chapter.
To make a call:
1. Lift the handset.
or
or
or
Press the Line (DN) Key.
2637
or
Press the Handsfree Key.
Note: The Handsfree Key must be enabled
by your network administrator
or
or
Press the Headset Key if you have a
headset connected to your telephone’s
headset jack (available on the M3903
and M3904).
Headset
/
Note: See “Set On-hook default path” on
page 89, and “Headsets” on page 128
for information on connecting a headset to
your M3903 or M3904.
2. Dial the number.
Note: Whenever you read “Lift the
handset,” in this guide, you may
alternatively press a free Line (DN) Key,
Handsfree Key, or the Headset Key. You
receive dial tone with each of these
actions.
To change from handset to headset:
The Headset Key is used to switch to
the headset mode of operation.
Headset
/
The LED lights steadily to indicate that
you are in headset mode.
15
Make a call
Make a call while on-hook
To make a call while on-hook, leave the handset in the cradle while you dial a
number.
To dial on-hook:
1. Press a Line (DN) Key.
2637
2. Dial the number when you receive dial
tone.
3. Lift the handset when the called party
answers.
Auto Dial
Auto Dial lets you dedicate a feature key to a specific telephone number. When
the Auto Dial Key is pressed, the number is dialed automatically. This feature must
be enabled by your network administrator.
To use Auto Dial:
1. Lift the handset.
2. Press the associated Auto Dial Key.
AutoDial
The number is dialed automatically.
To display the Auto Dial number (M3903 and M3904):
1. Press the Display Key.
Display
Note: On the Meridian SL-100, press the
Inspect Key to display the number.
2. Press the configured Auto Dial Key.
AutoDial
The number appears on the display.
To store an Auto Dial number:
1. Press the Auto Dial Key, without lifting
AutoDial
the handset.
16
Make a call
2. Dial the number to be stored on the
Auto Dial Key.
Note 1: The number may contain up to
31 digits.
Note 2: Press the Pause Key to insert a
1.5 second pause in the dialing string.
long distance number, be sure that the
appropriate access codes are included.
3. Press the Auto Dial Key again. The
AutoDial
number is stored on the key.
Note: To change the key label “AutoDial”, select Change feature key label
from the Options List menu. Please see “Change a Feature Key label” on page 80
for detailed instructions.
Ring Again (M3902)
Use the Ring Again feature when you dial a number and receive a busy tone or
no answer. The Ring Again feature lets you know when the person you dialed is
available or has used their telephone. The feature notifies you when to redial your
party. The Ring Again feature automatically redials the number.
To use Ring Again:
1. Dial a number and receive a busy tone
or no answer.
Note: On the Meridian SL-100, Ring
Again is available on busy tone only.
2. Press the Ring Again Key, or enter the
RingAgn
Ring Again Activate FFC.
To call a Ring Again party when you
receive notification:
When the number you want to reach is
available, or the person has re-used their
set, you hear the Ring Again tone.
1. Lift the handset, you receive dial tone.
Note: If you used the Ring Again Activate
FFC, the number is automatically dialed.
2. Press the Ring Again Key.
RingAgn
17
Make a call
To cancel Ring Again before
notification:
Press the Ring Again Key a second
time before hearing the notification
tone, or enter the Ring Again
Deactivate FFC.
RingAgn
Ring Again (M3903 and M3904)
Use the Ring Again feature when you dial a number and receive a busy tone or
no answer. The Ring Again feature lets you know when the person you dialed is
available or has used their telephone. The feature notifies you when to redial your
party. The Ring Again feature automatically redials the number.
To use Ring Again:
1. Dial a number and receive a busy tone
or no answer.
Note: On the Meridian SL-100, Ring
Again is available on busy tone only.
2. Press the Ring Again Key.
RingAgn
The screen displays Ring again is
active.
To call a Ring Again party when you
receive notification:
When the number you want to reach is
available, or the person has re-used their
set, you hear the Ring Again tone.
1. Lift the handset or press a line (DN)
key.
2. Press the Ring Call Key.
RngCall
To cancel Ring Again before
notification:
Press the Cancel Ring Again Key.
CanclRA
The screen displays Ring Again is
cancelled.
18
Make a call
Redial last number called
Last Number Redial allows you to automatically redial the last number you
dialed. This feature must be enabled by your network administrator.
To use Last Number Redial when
using the handset:
1. Lift the handset.
2. Press a Line (DN) Key.
2637
To use Last Number Redial when
using handsfree:
Press the Line (DN) Key twice.
2637
2637
The last number you dialed is
automatically redialed.
Note: On Meridian SL-100, press the £
Key twice.
19
Make a call
Use Speed Call (M3902)
The Speed Call feature allows you to automatically dial frequently called numbers
by entering a one, two, or three digit access code. Contact your network
administrator to determine the capacity of your Speed Call list. This will establish
the number of digits you will enter for each access code.
A telephone designated as a Speed Call Controller can program or edit the Speed
Call list. This feature must be enabled by your network administrator.
To store or change a Speed Call
number:
1. Press the Speed Call Controller Key, or
lift the handset and enter the Speed
Call Controller FFC.
SpcCtlr
The triangular icon flashes, indicating
programming mode.
2. The phone prompts you to dial a one,
two, or three digit code and the
telephone number.
Note: Dial the access code (if required)
followed by the internal, external, or
long-distance telephone number.
3. Press the Speed Call Controller Key
again, or enter the Speed Call
Controller FFC.
SpcCtlr
The code and number are saved. The
flashing icon turns off.
To make a Speed Call:
1. Lift the handset.
2. Press the Speed Call Controller key or
the Speed Call User Key, or enter the
Speed Call User FFC.
SpcCtlr
SpcUser
or
3. Dial the Speed Call code assigned to
the telephone number.
The number is automatically dialed.
20
Make a call
Use Speed Call (M3903 and M3904)
The Speed Call feature allows you to automatically dial frequently called numbers
by entering a one, two, or three digit access code. Contact your network
administrator to determine the capacity of your Speed Call list. This will establish
the number of digits you will enter for each access code.
A telephone designated as a Speed Call Controller can program or edit the Speed
Call list. This feature must be enabled by your network administrator.
To store or change a Speed Call
number:
1. Press the Speed Call Controller Key.
SpcCtrl
The screen displays Enter Code, then
number.
2. Dial a one, two, or three digit code.
Use the Delete Key if you make a
mistake. Use the Cancel Key to leave
the screen without storing a speed call
number.
Note: A dash is automatically inserted
after the required number of digits have
been entered.
3. Dial the associated telephone number.
Use the Delete Key if you make a
mistake. Use the Cancel Key to leave
the screen without storing a speed call
number.
Note 1: Dial the access code (if required)
followed by the internal, external, or
long-distance telephone number.
4. Press the Done Key to save the code
Done
and number.
To make a Speed Call:
1. Lift the handset.
2. Press the Speed Call Controller Key or
SpcCtrl
SpcUsr
the Speed Call User Key.
or
The screen displays Enter code.
21
Make a call
3. Dial the Speed Call code assigned to
the telephone number.
The number is automatically dialed.
Make a System Speed Call
System Speed Call allows you to make a call by dialing Speed Call codes which
may override your telephone’s class of service restrictions. The System Speed Call
feature is set up on the system by your network administrator. It is a speed dial
number that is common to many users, therefore it is set up on the system not on
your individual telephone.
To make a System Speed Call:
1. Lift the handset.
2. Press the System Speed Call
Controller key or the System Speed
Call User Key, or enter the System
Speed Call User FFC (Meridian 1) or
FAC (Meridian SL-100).
SScCtlr
SScUser
or
3. Dial the Speed Call code assigned to
the telephone number.
The number is automatically dialed.
Use Hot Line
The network administrator can program a Hot Line Key that allows you to dial a
specific number automatically. The network administrator can apply other features
to the Hot Line such as Call Redirection, so that the Hot Line call is answered by a
person and not by a voice mail box.
To use Hot Line:
Press the Hot Line Key.
Hotline
The Hot Line Key automatically dials
the number.
Note 1: On the Meridian SL-100 system,
the Automatic Line (AUL) feature is the same
as the Hot Line feature.
Note 2: If your main DN is a Hot Line, lift
the handset. The Hot Line dials the number
automatically.
22
Make a call
Make an Intercom call
The Intercom feature connects a group of people together through an Intercom
Key. You can use the Intercom feature to call a member of your intercom group by
pressing a code assigned to each member of the group. The intercom group must
be set up by your network administrator.
To make an Intercom call:
1. Lift the handset.
2. Press the Intercom Key.
Intercom
3. Dial the one or two digit code for the
intercom group member you wish to
call.
To answer an Intercom call while on
a line other than your Intercom
group line:
1. Press the Hold Key to put the current
Hold
call on hold.
/
or
or
Press the Goodbye Key to end the call.
Goodbye
/
2. Press the Intercom Key and begin to
Intercom
speak.
23
Answer a call
Answer a call
When you receive an incoming call, your telephone rings and the LCD indicator
flashes.
To answer a call:
Lift the handset.
or
or
Press the Handsfree Key (M3902,
M3903, and M3904).
or
or
or
Press the Line (DN) Key beside the LCD
indicator as it flashes.
or
2637
Press the Headset Key if you have a
headset connected to your telephone
(available on the M3903 and
M3904).
Headset
/
24
While on an active call
While on an active call
This section describes features that you can use while on an active call.
Place a call on Hold
Use the Hold feature when you are talking with one party and a second call
comes in on a second line. You can answer the second call and retain the original
call by putting it on Hold.
To place a call on Hold:
Press the Hold Key.
Hold
/
The LCD indicator flashes beside the
line on hold.
Note 1: If the Automatic Hold feature is
configured for your Meridian 1, the active
call is automatically put on hold when you
answer the second call.
Note 2: On the Meridian SL-100
Automatic Hold is the default feature.
Note 3: The caller hears music while on
hold, if the Music on Hold feature is
configured for your system.
To retrieve a call on hold:
Press the Line (DN) Key beside the
flashing LCD indicator.
2637
Transfer a call (M3902)
Use the Transfer feature to redirect a call to a third party.
To use the Transfer feature:
1. Press the Transfer Key.
Transfer
/
The other party is on hold and you
receive dial tone. The LED indicator
light flashes steadily.
2. Dial the number of the telephone
where the call is to be transferred.
25
While on an active call
3. When you hear the ring or a person
answers, press the Transfer Key to
complete the call transfer.
Transfer
/
The LED indicator goes from steady on
to off.
To go back to the original call if the
transfer is incomplete:
If the person you called is not
available, press the Line (DN) Key to
reconnect to the original call.
Note: On the Meridian SL-100, press the
Transfer Key, dial the number and press
the Goodbye Key. If you press the Transfer
Key the second time, you get a three way
conference.
Transfer a call (M3903 and M3904)
Use the Transfer feature to redirect a call to a third party.
To use the Transfer feature:
1. Press the Transfer Key.
Trans
The other party is on hold and you
receive a dial tone. The screen
displays Call on hold, dial number.
2. Dial the number of the telephone
where the call is to be transferred.
3. Press the Swap Key to switch between
talking with the original caller and the
new caller. Press the Connect Key to
complete the transfer.
Swap
Connect
or
The two callers are connected and
your telephone is ready to make or
receive new calls.
26
While on an active call
To go back to the original call if the
transfer is incomplete:
1. Press the Goodbye Key.
Goodbye
/
2. Press the Line (DN) Key with the
flashing icon to return to your original
call.
2637
Use Timed Reminder Recall
Timed Reminder Recall gives you a reminder tone when a call you transferred is
not answered.
To use Timed Reminder Recall:
1. Press the Transfer Key. The call is put
Trans
on hold.
2. Dial the number where you want to
transfer the call.
3. Press the Transfer Key again.
Trans
or
or
Replace the handset before the person
answers. This starts the recall timer.
Note 1: On the Meridian SL-100, do not
press the Transfer Key again; replace the
handset before the person answers.
Meridian SL-100 uses the Blind Transfer
Recall feature.
Note 2: If the transfer is complete, the
recall timer stops.
27
While on an active call
If the transferred call is not
answered, your telephone rings:
1. Lift the handset.
2. Press the Transfer Key and repeat the
Trans
transfer (to a different DN).
Note: If you transfer a call to a person and
they pick up the line while you are still on
the line, press the Goodbye Key to
complete the transfer. Check with your
network administrator to determine the
time interval of your recall timer.
Use Attendant Recall
The Attendant Recall feature allows you to contact an attendant while on a call
and connect the call to the attendant.
To contact the attendant while on a
call:
1. Press the Attendant Recall Key
AttRecall
while on a call.
Stay on the line until the attendant
answers.
2. Press the Goodbye Key.
Goodbye
/
The caller remains connected to the
attendant.
Note: On the Meridian SL-100, the
Attendant Recall Key is not available; use
the Transfer Key to connect a call to the
attendant.
Use Call Park (M3902)
The Call Park feature allows a call to be held temporarily and to be retrieved from
any telephone. You can park an incoming call and page the called party. When
you use Call Park, you do not tie up a line. Your network administrator can set up
a System Park Extension where most calls are automatically parked.
If configured network-wide, Call Park can be used across networks.
28
While on an active call
To Park a call on the System Park DN
or your own DN:
Press the Park Key.
Park
If there is a System Park DN, the call
automatically parks on the System
Park DN. Otherwise, it parks on your
DN.
Note: On the Meridian SL-100, press the
Park Key and you receive a confirmation
tone. Press the Park Key again or the
Goodbye Key.
To park a call on a DN other than the
System Park DN or your own DN:
1. Press the Park Key.
Park
2. Dial the DN where you want to park
the call.
3. Press the Park Key.
Park
Note: On Meridian SL-100, press Directed
Call Park (DCPK) Key. Dial the DN where
you want to park the call. Press DCPK
again.
To park a call using FFCs/FACs:
1. Press the Transfer Key.
Transfer
/
2. Dial the Park Call FFC (Meridian 1), or
the Directed Call Park or System Call
Park FAC (Meridian SL-100).
3. If you do not want the System Park DN
or your own DN, Dial a DN where you
want to park the call.
4. Press the Transfer Key.
Transfer
/
29
While on an active call
To retrieve a parked call:
1. Lift the handset.
2. Press the Park Key, or to retrieve the
call using FFCs/FACs; Dial the Park
Call Access FFC (Meridian 1), or the
Directed Call Park or System Call Park
FAC (Meridian SL-100).
Park
or
3. Dial the DN where you parked the
call.
Note: If a parked call is not retrieved
within a specified period of time, it rings
back to your telephone or to the attendant.
Check with your network administrator to
determine your specified period of time.
Use Call Park (M3903 and M3904)
The Call Park feature allows a call to be held temporarily and to be retrieved from
any telephone. You can park an incoming call and page the called party. When
you use Call Park, you do not tie up a line. Your network administrator can set up
a System Park Extension where most calls are automatically parked.
If configured network-wide, Call Park can be used across networks.
To park a call on a System Park DN:
1. Press the Park Key.
Park
OK
The screen displays a System Park DN
and asks for confirmation.
2. Press the OK Key. The call parks on the
System Park DN.
Note: On the Meridian SL-100, the screen
displays Park on the first line. On the
second line, the screen displays
Call Parked. Press the Goodbye Key to
complete the call park process. The call is
parked on your own DN.
30
While on an active call
To park a call on a DN other than the
System Park DN on the Meridian 1:
1. Press the Park Key.
Park
The screen displays Press OK to park
call on 2190 (Where 2190 represents
the default System Park DN).
2. Dial the DN where you want to park
the call.
When you begin dialing, the screen
displays Enter digits, then park.
When you have completed dialing the
call park DN, the screen displays
Press OK to park call.
3. Press the OK Key.
OK
The call parks on the selected DN.
To park a call on a DN other than the
System Park DN on the
Meridian SL-100:
1. Press the Direct Park Key.
DirectPark
2. Dial the DN where you want to park
the call.
Note: Press the • key twice to park the
call on the System Park DN.
3. Press the Direct Park Key.
DirectPark
The call parks on the selected DN.
31
While on an active call
To retrieve a parked call on the
Meridian 1:
1. Lift the handset.
2. Dial the DN where you parked the
call.
Note: If a parked call is not retrieved
within a specified period of time, it rings
back to your telephone or to the attendant.
Check with your network administrator to
determine your specified period of time.
To retrieve a parked call on the
Meridian SL-100:
1. Lift the handset.
2. Press the Direct Park Key or enter the
DirectPark
Call Park FAC.
3. Dial the DN where you parked the
call.
Note 1: If a parked call is not retrieved
within a specified period of time, it rings
back to your telephone or to the attendant.
Check with your network administrator to
determine your specified period of time.
Note 2: Check with your network
administrator to determine your System
Park DN.
32
While on an active call
Calling Party Number (M3902)
The Calling Party Number feature allows you to record a caller’s number, for
accounting purposes, while on an established call. Note: This feature is not
available on the Meridian SL-100.
To record a caller’s number:
1. Press the Calling Party Key. Enter
CParty
number appears on the display.
2. Dial the calling party’s telephone
number.
3. Press the Calling Party Key.
CParty
Calling Party Number/Charge Account (M3903 and M3904)
The Calling Party Number/Charge Account feature allows you to record a
caller’s number or charge account number for accounting purposes while on an
established call.
To record the calling party number or
charge account number (Meridian 1):
1. Press the Charge Key. The screen
Charge
displays Select Charge type.
2. Press the Account Key. The screen
Account
displays Enter account number.
or
or
Press the Calling Party Number Key.
The screen displays Enter Calling
party number.
CParty
3. Dial the charge account number or
calling party number. Use the Clear
Key or Delete Key to edit the number.
Press the Exit Key to leave the screen
without charging the call.
4. Press the OK Key. You return to your
OK
call.
33
While on an active call
To record a charge account number
(Meridian SL-100):
1. Lift the handset and ask the calling
party to hold
2. Flash the switch hook
3. Dial the Account Code FAC.
You receive dial tone.
4. Dial the account code digits.
5. Flash the switch hook.
You are returned to your call.
Display incoming calls
The Display Key allows you to be on an active call and display an incoming
caller’s name and/or number, if not automatically displayed, without interfering
with the call in progress.
To view the name of a second caller
while on a call in progress:
1. Press the Display Key.
Display
2. Press the flashing Line (DN) Key. The
call waiting information appears on
the display.
2637
Note 1: Use of the Display Key does not
interfere with the call in progress.
Note 2: You can use the Display Key in
combination with other feature keys to
display information associated with the
feature.
Note 3: On the Meridian SL-100, while
on an active call, press the Inspect Key to
view information on an incoming call.
34
While on an active call
Trace a Malicious call
Malicious Call Trace provides a way for you to trace nuisance calls. The feature is
available for both internal and external calls. When the key is pressed, your
Directory Number and the telephone number of the caller are recorded for access
by your network administrator.
To use Call Trace while you are on a
call:
Press the Call Trace Key.
CallTrace
Note: On the Meridian SL-100, press the
MalcsHold (Malicious Call Hold) Key.
To use Call Trace if you do not have a
Call Trace Key:
1. Press the Transfer Key or the
Trans
Conf
Conference Key.
or
Note: On the Meridian SL-100, press only
the Transfer Key.
2. Dial the Malicious Call Trace FFC
(Meridian 1) or the Malicious Call
Hold FAC (Meridian SL-100).
p
3. Press the Line (DN) Key beside the
flashing LCD indicator to return to the
call.
2637
Note: On the Meridian SL-100, after
dialing the Malicious Call Hold FAC, you
are automatically reconnected to the
calling party.
35
Incoming calls
Incoming calls
This section describes features that you can use with incoming calls.
Activate Automatic Answerback
When Automatic Answerback is active, your set automatically answers in
handsfree mode after one ring.
Note: When Automatic Answerback is active, calls do not forward to your voice
message service.
To use Automatic Answerback:
Press the Automatic Answerback Key.
AutoAns
To deactivate Automatic
Answerback:
Press the Automatic Answerback Key.
AutoAns
36
Incoming calls
Use Call Pickup
Call Pickup allows you to pick up a call from any telephone in the same Pickup
Group or another Pickup Group. This feature must be enabled by your network
administrator.
To answer a call in your own Call
Pickup Group:
1. Lift the handset.
2. Press the Pickup Key or enter the
Pickup Ringing Number FFC
(Meridian 1) or FAC (Meridian
SL-100).
Pickup
To answer an incoming call in
another Call Pickup Group:
1. Lift the handset.
2. Press the Group Pickup Key or enter
GrpPickup
the Pickup Group FFC.
3. Dial the Pickup Group number of the
telephone that is ringing.
Note 1: The network administrator assigns
the Pickup Group number.
Note 2: This feature is not applicable on
the Meridian SL-100 system.
To answer a call at a specific
extension within your Pickup Group:
1. Lift the handset.
2. Press the DN Pickup Key, or enter the
Pickup Directory Number FFC
DNPickup
(Meridian 1) or the Directed Call
Pickup FAC (Meridian SL-100)
3. On the Meridian SL-100, dial the
extension number of the ringing
telephone.
p
Note: If the pickup DN is invalid, you
receive an overflow burst tone, and the
screen displays Release and try again.
Press the Goodbye Key.
37
Incoming calls
Use Call Waiting
Call Waiting puts your current call on hold, while you answer an incoming call.
Example: The attendant routes an outside call to you while you are on an existing
call. Call Waiting allows you to recognize the call and respond to it. This feature
must be enabled by your network administrator.
To answer an incoming call while on
another call:
1. Press the Hold Key when you hear the
Hold
tone.
/
The Call Waiting status icon appears
in the display.
2. Press the Call Wait Key (CWait for
CallWait
M3902) to answer the call.
To return to your first telephone call:
1. Press the Hold Key, if you want to put
Hold
the second call on hold.
/
or
or
Press the Goodbye Key to end the
second call.
Goodbye
/
2. Press the Line (DN) Key associated
with the first call.
If you do not have a Call Waiting
Key:
1. If you do not have a Call Waiting Key
and you hear the Call Waiting tone,
press the Goodbye Key to end your
current call.
Goodbye
/
2. Press the Line (DN) Key beside the
flashing status icon to answer the
incoming call.
2637
38
While you are away from your desk
While you are away from your desk
This section describes features that you may wish to use when you are away from
your desk.
Forward calls (M3902)
The Call Forward feature allows you to direct your calls to ring at another Line
(DN). You cannot forward calls while your telephone is ringing.
To forward your calls:
1. Press the Forward Key, or lift the
handset and enter the Call Forward All
Calls Activate FFC (Meridian 1) or
FAC (Meridian SL-100).
Forward
Forward
2. Dial the DN where you want to
forward your calls.
3. Press the Forward Key.
To view the number that your calls
are being forwarded to:
1. Press the Display Key, or lift the
handset and enter the Call Forward All
Calls Verify FFC.
Display
Forward
Note: On the Meridian SL-100, press the
Inspect Key instead of the Display Key.
2. Press the Forward Key.
This action displays the forward
number and leaves Call Forward
active.
To cancel Call Forward:
Press the Forward Key, or lift the
handset and enter the Call Forward All
Calls Deactivate FFC (Meridian 1) or
FAC (Meridian SL-100).
Forward
To reinstate Call Forward to the same
number:
Press the Forward Key twice.
Forward Forward
39
While you are away from your desk
Forward calls (M3903 and M3904)
The Call Forward feature allows you to direct your calls to ring at another Line
(DN). You cannot forward calls while your telephone is ringing.
To forward your calls:
1. Press the Forward Key.
Forward
The previously stored forward number
appears, if one exists, and the screen
displays Enter forward number.
2. If desired, enter a new number. The
existing number is automatically
deleted. If you make a mistake, use the
Delete Key to delete the previous
digit(s). Press Cancel to leave this
screen without forwarding your
telephone or changing the number.
3. Press the Done Key to activate Call
Done
Forward.
To view the number that your calls
are being forwarded to:
1. Press the Check Forward Key.
CheckFw
2. Press the Exit Key to return to the
Exit
previous screen.
This action will leave Call Forward
active.
To cancel Call Forward:
1. Press the Check Forward Key.
CheckFw
2. Press the Cancel Forward Key.
CanclFw
40
While you are away from your desk
Forward internal calls only
Internal Call Forward allows only calls originating at internal DNs to ring at
another DN. Calls originating outside your Meridian 1 system will still ring at your
telephone. You cannot forward calls while your telephone is ringing.
To forward your internal calls:
1. Press the Internal Call Forward Key,
or lift the handset and enter the
IntForward
Internal Call Forward Activate FFC.
2. Dial the DN where you want to
forward your calls.
3. Press the Internal Call Forward Key.
IntForward
Receiving a call:
To cancel Internal Call Forward:
Press the Internal Call Forward Key,
or lift the handset and enter the
IntForward
Internal Call Forward Deactivate FFC.
To reinstate Internal Call Forward to
the same number:
Press the Internal Call Forward Key
twice.
IntForward
IntForward
Note: The Meridian SL-100 uses the Call
Forward Busy/Don’t Answer -
Internal/External FAC. This feature allows
Meridian SL-100 user to:
•
Forward an incoming call which
originated internally from a DN in
the same customer group as you.
•
Forward an incoming call which
originated externally from a DN
out of your customer group to a
DN outside your customer group.
41
While you are away from your desk
Use Remote Call Forward
The Remote Call Forward feature allows you (from any telephone other than your
own) to forward your calls to any telephone.
Note: On the Meridian SL-100, dial the Remote Access Directory Number. You
are prompted to enter the directory number of your telephone, your PIN, and the
Call Forwarding authorization code. Follow the prompts to activate, deactivate, or
change call forwarding to a new destination.
To activate Remote Call Forward:
1. Lift the handset.
2. If you call from a telephone outside the
system, first dial your Direct Inward
dial tone.
3. Dial the Remote Call Forward Activate
FFC to activate the feature.
4. Dial your Station Control Password.
Note: Refer to “Secure your telephone” on
page 44.
5. Dial your DN.
You get a dial tone before you dial
your number.
6. Dial the number where you want to
forward your calls. If you forward calls
to an invalid number, you receive a
fast busy tone.
7. Press the £ Key.
£
To forward calls to a previous call
forward telephone number, skip step
six above.
42
While you are away from your desk
To cancel Remote Call Forward:
1. Lift the handset.
2. If you call from a telephone outside the
system, first dial your Direct Inward
System Access number and wait for
dial tone.
3. Dial the Remote Call Forward
Deactivate FFC.
4. Dial your Station Control Password.
5. Dial your DN.
You get a dial tone before you dial
your number.
6. Press the £ Key.
£
Note: When you use the Remote Call
Forward feature to change the number to
which your calls are being forwarded, this
information is not updated on the display
of your M3900 Series telephone. The
telephone’s display will continue to show
the last call forward number that was
entered from the telephone using the Call
Forward feature.
43
Secure your telephone
Secure your telephone
You can lock your telephone with a password to prevent unauthorized use of your
telephone. Note: This feature is not available on the Meridian SL-100.
To lock your telephone:
1. Lift the handset.
2. Dial the Electronic Lock Activate FFC
and your Station Control Password.
Note: If you perform this operation from
someone else’s telephone, also dial your
DN.
3. Press the Goodbye Key.
Goodbye
/
To unlock your telephone:
1. Lift the handset.
2. Dial the Electronic Lock Deactivate FFC
and your Station Control Password.
Note: If you perform this operation from
someone else’s telephone, also dial your
DN.
3. Press the Goodbye Key.
Goodbye
/
To change your password (must be
done from your telephone):
1. Lift the handset.
2. Dial the Station Control Password
Change FFC and your current
password. Dial your new password
twice (for verification).
3. Press the Goodbye Key.
Goodbye
/
44
Talk with more than one person
Talk with more than one person
This chapter describes features which allow you to talk with more than one person
at the same time.
Set up a Conference call (M3902)
You can set up a Conference call for up to six people (including yourself). Contact
your network administrator to determine the maximum number of people your
system allows on a conference call.
To set up a conference call:
1. Press the Conference Key while you
Conf
are on a call.
The other party is on hold and you
receive a dial tone.
2. Dial the number of the person you
want to add to the conference.
3. Press the Conference Key when the
Conf
person answers.
Everyone is able to join the
conversation.
If the person you attempt to add to
the conference is unavailable:
1. Press the Goodbye Key.
Goodbye
/
2. Press the Line (DN) Key to return to
your original call.
45
Talk with more than one person
Set up a Conference call (M3903 and M3904)
You can set up a Conference call for up to six people (including yourself). Contact
your network administrator to determine the maximum number of people your
system allows on a conference call.
To set up a conference call:
1. Press the Conference Key while you
Conf
are on a call.
The other party is on hold and you
receive dial tone. The screen displays
Call on hold, dial number.
2. Dial the number of the person you
want to add to the conference.
3. Press the Swap Key to switch between
talking with the original caller and the
new caller. Press the Connect Key to
complete the conference.
Swap
Connect
or
Everyone is able to join the
conversation.
If the person you attempt to add to
the conference is unavailable:
1. Press the Goodbye Key.
Goodbye
/
2. Press the Line (DN) Key with the
flashing icon to return to your original
call.
2637
46
Talk with more than one person
Join a call (M3902)
The Call Join feature allows you to connect an incoming call to a call already in
progress thereby creating a conference call. In order to use Call Join, your
telephone must be configured with either a second line (DN) or a Call Waiting
Key.
To connect a call on hold (on a
different line) to your current call:
1. Press the Conference Key.
Conf
2. Press the Key that has the caller you
want to connect to your current call.
3. Press the Conference Key again.
Conf
The person on hold joins your
conversation.
Join a call (M3903 and M3904)
The Call Join feature allows you to connect an incoming call to a call already in
progress thereby creating a conference call. In order to use Call Join, your
telephone must be configured with either a second line (DN) or a Call Waiting
Key.
To connect a call on hold (on a
different line) to your current call:
Conf
1. Press the Conference Key.
2. Press the Key that has the caller you
2637
want to connect to your current call.
3. Press the Connect Key.
Connect
The person on hold joins your
conversation.
47
Talk with more than one person
Selectable Conferee Display and Disconnect
You can view the list of active conferees by using the Conferee Selectable Display
Key and disconnect any party that has been added to the conference call. This
feature is not available on the Meridian SL-100 system.
To view active conferees:
1. While on a conference call, press the
Conferee Selectable Display Key. The
LCD indicator turns on. With each key
press, the screen changes to show a
different active conferee.
ConfSelDsp
Note: This action has no effect on the
displays of the other telephones involved in
the conference.
2. Press the Goodbye Key. If configured,
the Conference Count Display returns.
The LCD indicator turns off.
Goodbye
/
To disconnect a conferee:
1. While on a conference call, press the
Conferee Selectable Display Key. The
LCD indicator turns on. Continue to
press the key until the conferee you
want to delete appears on the screen.
ConfSelDsp
2. Press the Line (DN) Key on which the
conference call is established. The
selected conferee is disconnected from
the call.
2637
Note: If there are additional conferees to
be disconnected, press the Conferee
Selectable Display Key until the conferee
that is to be disconnected is displayed on
the screen.
3. Press the Goodbye Key. If configured
the Conference Count Display returns
and is updated to reflect the revised
total count of conferees. The LCD
indicator tuns off.
Goodbye
/
48
Talk with more than one person
Use Group Call
Group Call automatically calls members of a predefined group, one at a time,
until they have all answered. Ask your network administrator for details on how to
create a conference call group.
To call group members:
1. Lift the handset.
2. Press the Group Call Key or enter the
GroupCall
Group Call FFC.
The feature automatically calls all
group members. The icon flashes until
all members answer.
Their phone numbers appear on the
display as they answer. When the last
person answers, the Group Call
indicator lights steadily.
Note 1: When a person in your group is
on a conference call or another group call,
they are not connected to your group call.
Note 2: After all the people in the group
have answered, only the person who made
the group call can put the call on hold.
Note 3: On the Meridian SL-100, use the
Preset Conference feature for group calls.
Dial the specific DN for Preset Conference,
simultaneous ringing of the pre-selected
parties is activated.
49
Talk with more than one person
To answer a Group Call:
Lift the handset.
Note 1: If you are on a call and you
receive three 10-second tones, this is the
notification of a group call on your current
extension.
Note 2: If you are on a call on another line
on your telephone (M3903 and M3904)
when a group call is made, you receive a
long tone through the handset or speaker.
Note 3: You do not receive notification of
a group call if you are already on a
conference call or another group call.
To end a Group Call:
Press the Goodbye Key.
Goodbye
/
Note: When the person who made the
group call disconnects, the call terminates
for all members of the group. However, the
members of the Group Call can disconnect
from the call and not affect other members
on the call.
50
Work without interruption
Work without interruption
This chapter describes features that provide you with uninterrupted work time.
Activate Make Set Busy
Make Set Busy allows you to make your telephone appear busy to all callers.
To activate Make Set Busy:
Press the Make Set Busy Key, or lift the
handset and enter the Make Set Busy
Activate FFC.
MakeSetBsy
To deactivate Make Set Busy:
Press the Make Set Busy Key a second
time to deactivate the feature, or lift the
handset and enter the Make Set Busy
Deactivate FFC.
MakeSetBsy
51
Additional Call Features
Additional Call Features
Auto Dial Transfer Feature
Auto Dial Transfer allows you to use your Auto Dial Key to transmit digits to the
central office after a Trunk Switch Hook Flash. You must be on a central
office/exchange (CO) trunk call from or to a CO which offers Centrex or
exchange line-type features.
To use Auto Dial Transfer when you
pick up an incoming trunk call:
1. Press the Centrex Switch Hook Flash
CentrexSHF
Key and wait for interrupted dial tone.
Note: On the Meridian SL-100, Press the
Transfer Key instead of the Centrex Switch
Hook Flash Key. Auto Dial can be used to
transfer calls however, you do not have to
be on a central office trunk call, and the
Centrex Switch Hook Flash key is not
applicable to the Meridian SL-100.
2. Press the Auto Dial Key to call the
AutoDial
number desired.
3. Press the Goodbye Key to end the call.
Goodbye
/
Use the buzz signal
Buzz allows one person, whose telephone is linked to another telephone, to signal
the other telephone. The person signaled hears a buzz. Use this feature to notify
the other person of a call, a visitor, or a request.
To buzz the telephone linked to
yours:
Press the Buzz Key.
Buzz
The telephone linked to yours, buzzes
as long as you hold down the key.
Note: Buzz signal is not available on the
Meridian SL-100.
52
Additional Call Features
Call Page to make an announcement
Call Page allows you to make an announcement over the paging system. To make
a page call, dial the paging trunk access code.
Note: When the Page Key is used on an attendant console it overrides the
telephones; the telephones are disconnected and must re-access the paging trunk.
To connect to the paging system:
1. Lift the handset.
2. Dial the paging trunk access code.
The connection to the paging system is
complete.
3. Make your announcement.
To disconnect from the paging
system:
Press the Goodbye Key.
Goodbye
/
Centrex/Exchange Switch Hook Flash
Centrex/Exchange Switch Hook Flash allows you to signal the Central
Office/Exchange (CO) during an established call to use a Centrex service such as
call transfer or three-way calling.
To use Centrex/Exchange Line Switch
Hook Flash:
1. Press the Centrex Switch Hook Flash
CentrexSHF
Key You receive special dial tone.
2. Dial the codes for your custom Centrex
feature.
3. Press the Goodbye Key to end the call.
Goodbye
/
Note: The Meridian SL-100 is a central
office based PBX, and this feature is not
available.
53
Additional Call Features
Charge or Force Charge a call (M3902)
Call Charge allows you to charge a call to a specific account. Forced Charge
Account allows you to charge long-distance calls from a telephone restricted to
local calls.
Note: On the Meridian SL-100, the account code allows a user to enter a billing
number. If the account code is required, the user is prompted to enter a code by a
tone after the telephone number is dialed. If a user wishes to voluntarily enter an
account code, then flash the switch hook and enter the Account Code FAC. Flash
the switch hook again to return to the call.
To charge or force charge a local or a
long-distance call to an account
before you dial:
1. Lift the handset.
2. Press Charge Key, or enter the Call
Charge
Detail Recording Charge Account FFC.
3. Dial the charge account number.
You receive dial tone.
4. Dial the number.
To charge a call in progress:
1. Press the Transfer Key.
Transfer
/
2. Press Charge Key, or enter the Call
Charge
Detail Recording Charge Account FFC.
3. Dial the charge account number.
4. Press the Line (DN) Key to return to
2637
your call.
54
Additional Call Features
To charge a call to an account when
you transfer a call:
1. Press the Transfer Key.
Transfer
/
The call is placed on hold.
2. Press Charge Key, or enter the Call
Charge
Detail Recording Charge Account FFC.
3. Dial the charge account number.
You receive dial tone.
4. Dial the number to where the call is to
be transferred.
5. Press the Transfer Key when you hear
Transfer
/
the telephone ring.
Note: You can talk privately to the person
at the transfer number before you press the
Transfer Key.
To charge a call to an account when
you add someone to a conference
call:
1. Press the Conference Key.
Conf
The call is placed on hold.
2. Press Charge Key, or enter the Call
Charge
Detail Recording Charge Account FFC.
3. Dial the charge account number.
You receive dial tone.
4. Dial the number of the person you
want to add to the conference.
5. Press the Conference Key.
Conf
55
Additional Call Features
Charge or Force Charge a call (M3903 and M3904)
Call Charge allows you to charge a call to a specific account. Forced Charge
Account allows you to charge long-distance calls from a telephone restricted to
local calls.
Note: On the Meridian SL-100, the account code allows a user to enter a billing
number. If the account code is required, the user is prompted to enter a code by a
tone after the telephone number is dialed. If a user wishes to voluntarily enter an
account code, then flash the switch hook and enter Account Code FAC. Flash the
switch hook again to return to the call.
To charge or force charge a local or a
long-distance call to an account
before you dial:
1. Lift the handset.
2. Press the Account Key.
Account
The screen displays Enter account
number.
3. Dial the charge account number. Use
the Clear Key or Delete Key to edit the
number. Press the Exit Key to leave the
screen without charging the call.
4. Press the OK Key.
OK
5. Dial the number.
To charge a call in progress:
1. Press the Charge Key.
Charge
The screen displays Select Charge
type.
2. Press the Account Key.
Account
The screen displays Enter account
number.
56
Additional Call Features
3. Dial the charge account number. Use
the Clear Key or Delete Key to edit the
number. Press the Exit Key to leave the
screen without charging the call.
4. Press the OK Key. You return to your
OK
call.
To charge a call to an account when
you transfer a call:
1. Press the Transfer Key.
Trans
The call is placed on hold.
2. Press the Account Key.
Account
3. Dial charge account number.
You receive dial tone.
4. Dial the number of the telephone
where the call is to be transferred.
5. Press the Connect Key when you hear
Connect
the telephone ring.
Note: You can use the Swap Key to talk
privately to the person at the transfer
number before you press the Connect Key.
To charge a call to an account when
you add someone to a conference
call:
1. Press the Conference Key.
Conf
The call is placed on hold.
2. Press the Account Key.
Account
57
Additional Call Features
3. Dial the charge account number.
You receive dial tone.
4. Dial the number of the person you
want to add to the conference.
5. Press the Swap Key to switch between
talking with the original caller and the
new caller. Press the Connect Key to
complete the conference.
Swap
Connect
or
Enhanced Override Feature
Enhanced Override allows you to override an active call after you have attempted
a Forced Camp-on. Use Enhanced Override when you make either a simple call
or a consultation call (i.e., place a call on hold and call another party).
To use Enhanced Override:
1. Dial a telephone number and receive
a busy signal.
2. Press the Override Key or enter the
Override FFC to initiate a Forced
Camp-on.
Override
Override
If either of the persons on the call
disconnects at this time, you receive an
overflow (fast busy/engaged) signal.
3. Press the Override Key again or enter
the Override FFC again.
The other two persons on the call
receive an override tone and a
conference call is established between
the three of you. If anyone
disconnects, the other two persons will
remain connected.
To end the connection:
Press the Goodbye Key.
Goodbye
/
Note: Enhanced Override is not available
on the Meridian SL-100.
58
Additional Call Features
Forced Camp-on
Forced Camp-on allows your telephone to automatically ring another telephone
as soon as that telephone disconnects from its current call. Forced Camp-on
allows you to camp-on both internal and external calls.
To use Forced Camp-on:
1. Dial a telephone number and receive
a busy signal.
2. Press the Override Key, or enter the
Override FFC, to initiate a Forced
Camp-on.
Override
Note: The person you called hears a tone,
and you hear ring/ringback signal or
busy/engaged signal (depending on the
options chosen). You are now camped-on
to the number you dialed.
3. When the person you called finishes
their call, your telephone automatically
dials the number. Both your telephone
and their telephone ring.
To answer a camped-on call:
When the telephone rings, lift the
handset.
You are connected to the camped-on
caller.
Note: Your telephone can be programmed
for either Camp-on or Call Waiting, but
not both.
Note: Forced Camp-on is not available on
the Meridian SL-100. Please refer to the
Station Camp-on feature.
59
Additional Call Features
Station Camp-on
Station Camp-on allows you to transfer an external call to a busy extension.
When the busy extension disconnects from its current call, the transferred call will
ring at the now idle extension.
To activate Station Camp-on after
answering an incoming external
telephone call:
1. Press the Transfer Key.
Trans
The external party is on hold and you
receive a dial tone. The screen
displays Call on hold, dial number.
2. Dial the internal extension number of
the telephone where the call is to be
transferred.
3. On the M3903 and M3904 only,
Connect
press the Connect Key.
Note: The person you called hears a tone,
and you hear ring/ringback signal or
busy/engaged signal (depending on the
options chosen). The external caller hears
ring/ringback signal or music.
4. Replace the handset.
The external caller is now camped-on
to the number you dialed.
Note 1: You cannot camp-on to an
extension that has the Call Waiting feature
configured.
Note 2: If the camped-on call is not
accepted within a specified period of time,
it returns to you or to the Attendant. Contact
you network administrator to determine
where, and after what period of time,
unanswered calls are re-routed
60
Additional Call Features
Override Feature
You can Override a busy signal and interrupt another call. Note: This feature is
called Executive Busy Override on the Meridian SL-100.
To override a busy/engaged signal:
1. Dial a telephone number and receive
a busy signal.
2. Press the Override Key, or enter the
Override
Override FFC on the Meridian 1.
or
On the Meridian SL-100, press the
Executive Busy Override Key, or enter
the Busy Override FAC.
ExeBusyOvd
The people on the call in progress
receive a tone for approximately one
second; the feature connects the three
of you together. A short tone repeats
every sixteen seconds.
To end the connection:
Press the Goodbye Key.
Goodbye
/
To disconnect the third party from the
called party on the Meridian SL-100:
Press the Executive Busy Override
Key, or enter the Busy Override FAC
again.
ExeBusyOvd
61
Additional Call Features
Privacy Release
Privacy Release allows one or more people who share your DN to join your call.
To use Privacy Release while on an
established call:
Press the Privacy Release Key while
you are on a call.
PrivRls
One other person can now join the call
if they press the shared Line (MADN)
Key on their telephone.
Note: Repeat this step to allow additional
persons to join the call.
To re-establish Privacy if the
additional person does not join the
call:
Press the DN Key for which Privacy
Release is active.
2637
62
Additional Call Features
Radio Paging
Some telephone systems can have an on-site Radio Paging system. This system
feature allows you to page a person and stay on the line until they answer. The
paged person answers the call when they enter a special Paging “Meet - me”
code from any telephone. This connects the person paged to the party who paged
them.
Note: On the Meridian SL-100, dial the Paging Feature Access Code (FAC). A
network connection is established with the paging access trunk. This provides
access to loudspeaker paging equipment. Automatic Pre-selection, Automatic
Post-selection, and Special Radio Paging features do not apply to
Meridian SL-100.
To use Automatic Pre-selection
(“Meet - me” page):
1. Lift the handset.
2. Dial the Radio Paging FFC.
You receive paging dial tone.
3. Dial the number of the party you want
to page.
You receive ringback/ring tone.
Note 1: The person you paged uses any
telephone to enter a Radio Paging Answer
code, plus their own DN. This action
connects you and the person paged.
Note 2: If your call goes unanswered for a
preset time period, you receive a
continuous high pitched tone then silence.
Press the Goodbye Key.
To use Automatic Post selection:
The called party is either busy on the
telephone or away from the desk.
To page the called party there is no
need to redial the number of the called
party.
1. Press the Radio Page Key.
RadioPage
You receive special dial tone.
63
Additional Call Features
2. Dial the Radio Paging Access FFC.
You receive ringback/ring tone.
Note 1: The person you have paged can
proceed to any telephone, enter their Radio
Paging Answer code plus their own DN.
This action connects you and the person
paged.
Note 2: You receive a fifteen second, high
pitched tone, then silence if the party paged
does not answer the call within a preset
time period. When you receive this signal,
replace the handset or press the Goodbye
Key.
To use the Special Radio Paging
features:
If you carry a Radio Pager, you will
receive a paging indication when
another Meridian 1 telephone user
access the Radio Paging system and
dials your DN.
If the Radio Paging system is set up to
function in “Meet - me” mode, you can
use the following steps to answer the
paging call from any Meridian 1
extension.
1. Lift the handset.
2. Dial the Radio Paging Answer FFC.
You receive paging tone.
3. Dial your own DN.
You are connected to the paging
caller.
Note: If the paging caller has hung up you
will receive a steady high-pitched tone.
64
Additional Call Features
Voice Call
The Voice Call feature allows you to page another person or make an
announcement through someone else’s telephone speaker.
To make a voice call:
1. Lift the handset.
2. Press the Voice Call Key.
3. Make your announcement.
4. Press the Goodbye Key.
VoiceCall
Goodbye
/
To respond to a voice call:
Your telephone rings once and you
hear the caller's voice through your
speaker. Lift the handset.
Note: On the Meridian SL-100 use the
Individual Page from the Group Intercom
(GIC) feature. Press the GpIntercom Key
and dial the appropriate GIC number.
After the first ring, press the GpIntercom
Key and a one-way connection is
established. Make your announcement
over the speaker.
Use the Voice Messaging control screens
The Voice Messaging control screens allow you to send commands while
connected to your voice messaging system using the Soft Keys instead of the dial
pad. Note: This feature is not available on the Meridian SL-100.
To use Voice Messaging controls:
1. Lift the handset.
2. Press the Message Key.
Message
/
3. Use the dial pad to log in to your voice
mailbox.
4. Press the Voice Message Key.
Vmsg
65
Additional Call Features
5. Press the Play Key to play your first
Play
new message.
Note: Use the More. . . Key to view
additional message options.
6. Press the Stop Key to pause playback
of the message. Press Play to resume
playback
Stop
or
or
Press the Last Key to go to the previous
message. Press Play to playback the
message or Press Last again to move
to previous messages.
Last
or
or
Press the Next Key to go to the next
message. Press Play to playback the
message or Press Next again to move
to later messages.
Next
or
or
Press the Delete Key to delete the
current message.
Delete
or
or
Press the Skip Forward Key to
advance three seconds in the current
message.
Skip->
or
or
Press the Skip Backward Key to
rewind three seconds in the current
message.
Skip<-
7. Press the Quit Key at any time to exit
your voice messaging system. Your
telephone is now ready to make or
receive new calls.
Quit
66
Hospitality features
Hospitality features
These hospitality features are intended for hotel operations use.
Note: With the exception of Automatic Wake-Up, hospitality features are not
available on the Meridian SL-100.
Automatic Wake-Up
Although normally used as a hotel feature, Automatic Wake-Up may be useful to
business users who require a timed reminder call feature. From your telephone
you may program the Meridian 1 system to automatically place a call to you at a
predetermined time. When you answer the call, you hear recorded music for up
to thirty seconds followed by a pre-recorded announcement, or the attendant.
To enter the time for a wake-up call:
1. Lift the handset.
2. Dial the Automatic Wake-Up Activate
FFC on the Meridian 1 or the
Wake-Up Request FAC on the
Meridian SL-100.
3. Dial the wake-up time in a 24-hour
format (hhmm).
4. Press the Goodbye Key.
Goodbye
/
Note: On the Meridian SL-100, after you
enter the FAC, you receive a second dial
tone. Enter four consecutive digits to
specify an hour and minute. The reminder
time is specified in 24 hour format. (i.e.,
for 6:00 PM, input 1800.) You receive a
confirmation tone.
To cancel a wake-up call:
1. Lift the handset.
2. Dial the Automatic Wake-Up
Deactivate FFC on the Meridian 1 or
the Wake-Up Cancel FAC on the
Meridian SL-100.
67
Hospitality features
3. Press the Goodbye Key.
Goodbye
/
Note: On the Meridian SL-100, after you
enter the FAC, you receive a confirmation
tone.
To verify the time for the wake-up
call:
1. Lift the handset.
2. Dial the Automatic Wake-Up Verify
FFC.
3. Dial the wake-up time in a 24 hour
time format (hhmm). If it is correct, you
receive a confirmation tone.
Note: This feature is not available on the
Meridian SL-100. To change the specified
time for a wake-up call on the Meridian
SL-100, you must first deactivate the
feature and then activate the feature with a
new request.
4. Press the Goodbye Key.
Goodbye
/
Note: In 24-hour time format, 7:30 AM is
entered as 0730; 9:45 PM is 2145.
68
Hospitality features
Message Registration
Message Registration allows you to read, change, or reset meters that log your
hotel telephone calls.
To read meters:
1. Press the Message Registration Key.
MsgReg
2. Dial the room Directory Number (DN).
3. Press the Message Registration Key.
MsgReg
To change a meter:
1. Press the Message Registration Key.
MsgReg
2. Dial the room Directory Number (DN).
3. Dial the correct meter count.
4. Press the • Key.
•
5. Press the Message Registration Key
MsgReg
To reset a meter to zero:
1. Press the Message Registration Key.
MsgReg
2. Dial the room Directory Number (DN).
3. Press the • Key.
•
4. Press the Message Registration Key.
MsgReg
69
Hospitality features
Maid Identification
Maid Identification makes it easier to keep track of which maids clean which
rooms. The maid enters the information from the telephone in each room.
To enter cleaning status:
1. Press the Room Status Key.
RoomStatus
2. Dial the Directory Number (DN) for
the room for which the cleaning status
is being changed.
3. Dial one of the following cleaning
status codes:
⁄ = cleaning requested
¤ = cleaning in progress
‹ = room cleaned
› = room passed inspection
fi = room failed inspection
fl = cleaning skipped
‡ = not for sale
You receive interrupted dial tone.
4. Press the • Key.
•
5. Dial the Maid ID. If you dial the wrong
Maid ID, press the • Key and redial
the ID.
6. Press the Room Status Key.
RoomStatus
70
Hospitality features
Room Status
Room Status lets you read the status of a room using the display.
To read the status of a room:
1. Press the Room Status Key.
RoomStatus
2. Dial the Directory Number (DN) for
the room. The DN is displayed
followed by a two digit code.
The first digit indicates the occupancy
status:
0 = room vacant
1 = room occupied
The next digit indicates the cleaning
status of the room:
1 = cleaning requested
2 = cleaning in progress
3 = room cleaned
4 = room passed inspection
5 = room failed inspection
6 = cleaning skipped
7 = not for sale
3. Press the Room Status Key.
RoomStatus
71
Meridian SL-100 CLASS Features
Meridian SL-100 CLASS Features
Anonymous Caller Rejection
The Anonymous Caller Rejection feature allows you to reject incoming calls on
your line (DN) for which calling name and number have been intentionally
blocked. Only calls in which the information has been blocked are rejected.
Check with your network administrator regarding the availability of this feature.
To activate Anonymous Caller
Rejection:
1. Lift the handset.
2. Dial the Anonymous Caller Rejection
Activate FAC.
A recording or confirmation tone
informs you that Anonymous Caller
Rejection is activated.
To deactivate Anonymous Caller
Rejection:
1. Lift the handset.
2. Dial the Anonymous Caller Rejection
Deactivate FAC.
A recording or confirmation tone
informs you that Anonymous Caller
Rejection is deactivated.
Note: Availability of this feature is
dependent upon your Meridian SL-100
system software and network connections.
72
Meridian SL-100 CLASS Features
Automatic Callback
The Automatic Callback feature allows you to enter a Feature Access Code (FAC)
that will automatically set up a call to the last Directory Number (DN) you dialed
on your individual line (DN) regardless of whether the call was answered,
unanswered, or busy. Check with your network administrator regarding the
availability of this feature.
To activate Automatic Callback after
you have dialed a number:
1. Press the Goodbye Key to disconnect
Goodbye
the call.
/
2. Press the Line (DN) Key.
2498
3. Dial the Automatic Callback Activate
FAC and follow the instructions
provided by the announcement.
4. Press the Goodbye Key.
Goodbye
/
When both your line and the called
party’s line are idle, your telephone
will ring.
5. When the telephone rings, lift the
handset.
You will hear normal ringback/ring
tone.
To cancel Automatic Callback:
1. Press the Line (DN) Key.
2498
2. Dial the Automatic Callback
Deactivate FAC.
Note: Availability of this feature is
dependent upon your Meridian SL-100
system software and network connections.
73
Meridian SL-100 CLASS Features
Automatic Recall
The Automatic Recall feature allows you to enter a Feature Access Code (FAC)
that will automatically set up a call to the last incoming call on your Directory
Number (DN). Check with your network administrator regarding the availability
of this feature.
To activate Automatic Recall:
1. Press the Line (DN) Key.
2498
2. Dial the Automatic Recall Activate
FAC.
An announcement may provide
additional instructions or announce the
number of the last incoming call and
provide you with a choice of whether
or not to continue with the recall.
If you continue the recall, the
Automatic Recall feature will dial the
last number that called you. If the
number is busy, Automatic Recall will
continue trying until the line is idle.
When both your line and the called
party’s line are idle, your telephone
will ring.
3. When the telephone rings, lift the
handset.
You will hear normal ringback/ring
tone.
To cancel Automatic Recall:
1. Press the Line (DN) Key.
2498
2. Dial the Automatic Recall Deactivate
FAC.
Note: Availability of this feature is
dependent upon your Meridian SL-100
system software and network connections.
74
Meridian SL-100 CLASS Features
Customer Originated Trace
The Customer Originated Trace feature allows you to activate an immediate trace
of the last incoming call to your Directory Number (DN) without requiring prior
approval and manual intervention by your network administrator. Customer
Originated Trace may be activated on a per-call basis. This feature may be
activated using a feature key or by using a Feature Access Code (FAC). Check
with your network administrator regarding the availability of this feature.
To activate Customer Originated
Trace after receiving a harassing or
prank telephone call:
1. Press the Goodbye Key to disconnect
Goodbye
from the harassing or prank telephone
call.
/
2. Press the Line (DN) Key.
2498
3. Press the CustOrigTr Key, or dial the
CustOrigTr
Customer Originated Trace FAC.
An announcement will inform you
whether or not the call was successfully
traced.
4. Press the Goodbye Key to disconnect .
Goodbye
/
The feature is automatically
deactivated.
Contact your network administrator for
follow-up actions.
Note: Availability of this feature is
dependent upon your Meridian SL-100
system software and network connections.
75
Meridian SL-100 CLASS Features
Calling Name and Number Delivery Blocking
The Calling Name and Number Delivery Blocking feature allows you to control
the display of your Directory Number (DN), or your name and DN, on the display
of the party you are calling. This feature is available on a per-call basis. Instead of
your name and/or telephone number being displayed, the word “Private” is
displayed on the called party’s telephone display. Check with your network
administrator regarding the availability of this feature.
To activate Calling Name and
Number Delivery Blocking:
1. Press the Line (DN) Key.
2498
2. Dial the Calling Name and Number
Delivery Blocking FAC.
Listen for confirmation tone, or an
announcement, followed by dial tone.
3. Dial the telephone number.
Note: Availability of this feature is
dependent upon your Meridian SL-100
system software and network connections.
Selective Call Forward
The Selective Call Forward feature allows you to program a list of up to 31
Directory Numbers (DNs) from which calls to your DN will be rejected or blocked.
Incoming calls from DNs that are on the list will be routed to announcement, or
other call treatment may be assigned. Check with your network administrator
regarding the availability of this feature.
To activate Selective Call Forward:
1. Press the Line (DN) Key.
2498
2. Dial the Selective Call Forward FAC.
Listen to the announcement for
instructions on how to turn on, turn off,
enter, change, or review your Selective
Call Forward list.
Note: Availability of this feature is
dependent upon your Meridian SL-100
system software and network connections.
76
Telephone display
Telephone display
This section summarizes the display features of the M3902, M3903, and the
M3904. Idle display is shown in the following figures.
M3902 display
The M3902 display gives call status and feature information.
Date/time display
Call party info
Feature Status info
Options info
2637
Conf Forward AutoDl
08/12 5:48
553-9078
M3903 display
The upper portion of the display on the M3903 gives call status information, the
lower display area contains a single line which displays feature information. If
you are viewing a list that contains more than one item, you must use the
Navigation Keys to scroll through the list. When the item you want appears, press
the Select Key.
Line/Feature
Key Status
Auto Dial
2637
Date/time display
Call party info
Aug 20 5:48 P
5 New callers
Feature Status info
Options info
Directories info
Redial
Callers
A
Forward
A
A
Quit
Copy
553-9077C
77
Telephone display
M3904 display
The upper portion of the display on the M3904 gives call status information, the
lower display area is a three line feature information display.
DisplayA
AConfSelDspA
A utoDialA
A
IntercomA
A
2639A
A2637A
A
Line/Feature
Key Status
Aug 20 5:48 PA
Date/time display
Call party info
A
NORTEL NETWORKSA
A
Feature Status info
Options info
5 New callersA
Directories info
ForwardA
CallersARedialA
A
A
A
Quit
Copy
553-9076C
Note: Refer to “Your Telephone’s Controls” on page 5 and for more information
on display and specialized key information.
78
Options List
Options List
The Options List (available on the M3902, M3903, and M3904) allows you to
customize certain characteristics of your phone. Screen prompts take you
step-by-step through procedures and keep you informed on the status of the
following settings: Language, Change feature key label, Screen contrast, Volume
adjustment, Ring type, Call log options, Live dial pad, Preferred name match,
Area code set-up, Call timer enable, Date/time format, Key click enable, Headset
port on call, Headset port external alerter and recorder interface, Call indicator
light, On hook default path, and Display diagnostics.
Most of the options are available to you on the M3902, M3903, and M3904.
Some of the options are available only if turned on by your network administrator;
others are designed for specific models in the M3900 series.
To change any option’s setting:
1. Press the Options Key.
Options
/
2. Use the Navigation Keys to scroll up
or down through the options list.
3. Press the Select Key when the desired
Select
option is highlighted.
4. Change the option’s settings. Refer to
the following pages for details. The
display also provides you with
information to adjust your selection.
5. Press the Done Key to save your
Done
changes.
6. Press the Quit Key or Options Key to
Quit
exit.
or
Options
/
Note: If you press the Quit Key or Options Key before you press the Done Key,
you exit the Options List without saving your changes.
79
Options List
Select a language
The display is available in multiple languages. After you select Language. . . from
the Options List menu,
1. Use the Navigation Keys to highlight
the desired language (e.g., German).
Deutsch
2. Press the Select Key.
Select
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Change a Feature Key label (M3902)
You can change the labels on the three feature keys located at the bottom of the
display on the M3902.
To change a Feature Key label:
1. Use the down Navigation Key to
highlight Change feature key label.
Change feature key label
2. Press the Select Key.
Select
This action takes you to the Feature
Key menu and highlights Edit a
feature key label.
3. Press the Select Key again.
Select
The prompt asks you to select the key
you want to change.
4. Use the Navigation Keys to highlight
the label you want to change,
(e.g., AutoDl).
80
Options List
5. Press the Select Key.
Select
6. Press the Dial Pad Key that is printed
with the first letter in your new label.
appears.
7. Repeat step 6 until you have changed
the entire label.
Press the Done Key to save changes. Press the Options Key to exit.
Note 1: For a detailed example of using the dial pad to enter text into your M3900 Series
telephone, please see “Add a Personal Directory entry” on page 102.
Note 2: You cannot change the label on your primary DN.
Note 3: Use the Case Key to change the case of the letter, as needed. You can use the
Delete Key to delete one character, or the Clear Key if you want to delete the entire label.
Note 4: Press the Up Navigation Key to access special characters you may want to include
in the label. Use the Navigation Keys to locate the character you want to include. Press the
Select Key to choose the highlighted character. Press the Return Key to return to label entry
without selecting a special character.
To restore all key labels:
1. Use the down Navigation Key to
highlight Restore all key labels.
Restore all key labels
2. Press the Select Key.
Select
The display asks you to verify that you
want to restore all labels.
3. Press the Restore Key.
Restore
Press the Done Key to return to the Options List menu. Press the Options Key to
exit.
81
Options List
Change a Feature Key label (M3903 and M3904)
You can change the name on the Programmable Line (DN)/Feature Keys
(self-labeled). These keys are located on both sides of the top portion of the
display area on the M3903 and M3904.
To change a Feature Key label:
1. Press the down Navigation Key once
to highlight Change feature key
label.
Change feature key label
2. Press the Select Key.
Select
This action takes you to the Feature
Key menu and highlights Change
feature key label.
3. Press the Select Key again.
Select
The prompt asks you to select the key
you want to change.
4. Press the Programmable Line
(DN)/Feature Key whose label you
want to change, (e.g., AutoDial).
AutoDial
5. Press the Dial Pad Key that is printed
with the first letter in your new label.
appears.
6. Repeat step 5 until you have changed
the entire label.
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Note 1: For a detailed example of using the dial pad to enter text into your M3900 Series
telephone, please see “Add a Personal Directory entry” on page 102.
Note 2: You cannot change the label on your primary DN. Press the Shift Key if the label
you want to change in on the second layer of the Programmable Line (DN)/Feature Keys
(self-labeled).
82
Options List
Note 3: Use the Case Key to change the case of the letter, as needed. You can use the
Delete Key to delete one character, or the Clear Key (M3903) if you want to delete the entire
label. On the M3903 you may use the Space Key to enter a space or the Restore Key to
restore the label to the default value.
Note 4: Press the Up Navigation Key or the Chars Key (M3903) to access special
characters you may want to include in the label. Use the Navigation Keys to locate the
character you want to include. Press the Select Key to choose the highlighted character. Press
the Return Key to return to label entry without selecting a special character.
To restore one key label (M3904):
1. From the Feature Key menu, use the
down Navigation Key to highlight
Restore one key label.
Restore one key label
2. Press the Select Key.
Select
3. Press the Programmable Line
(DN)/Feature Key (self-labeled) that
you want to restore to the original
label (e.g., Purchasing).
Purchasing
Press the Done Key to return to the Options List menu. Press the Quit Key or
Options Key to exit.
To restore all key labels:
1. Use the down Navigation Key to
highlight Restore all key labels.
Restore all key labels
2. Press the Select Key.
Select
The display asks you to verify that you
want to restore all labels.
3. Press the Restore Key.
Restore
Press the Done Key to return to the Options List menu. Press the Quit Key or
Options Key to exit.
83
Options List
Adjust Screen contrast
The Screen contrast option allows you to adjust the contrast of the display on your
telephone. After you select Screen contrast from the Options List menu;
From the Contrast screen, press the
Lower Key to decrease the display
contrast level, or press the Higher Key
to increase the display contrast level.
Lower
Higher
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Adjust volume
Note: After you select Volume adjustment. . . from the Options List menu, a list
of adjustable items for your telephone model appears. It is recommended that you
adjust these parameters while you are on a telephone call so that you can judge
the impact of the changes your are making.
To adjust the Ringer volume:
1. Select Ringer from the Volume menu.
Ringer
2. Press the Lower Key to decrease the
ringer volume, or press the Higher Key
to increase the ringer volume.
Lower
Higher
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Use the procedure above to adjust the volume on the following items:
Buzzer
Headset listen
Headset talk
Speaker
Handset listen
Handsfree listen
Headset sidetone
Note 1: Headset listen is adjustable on the
M3903 and M3904 only.
Note 2: Headset talk and Headset
sidetone are adjustable on the M3904
only.
Note 3: Headset sidetone (M3904 only) is
the sound of your own voice that you hear
in the headset speaker.
84
Options List
Choose Ring type
The Ring type option allows you to choose from among the various ringing
sounds available for your telephone model. After you select Ring type. . . from
the Options List menu;
1. Use the Navigation Keys to scroll
through the list of ring types.
Ring type 3
2. Press the Play Key to sample a ring
Play
tone.
3. Press the Select Key to activate the
desired ring type (M3903 and
M3904).
Select
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Select Call Log options
The Call Log options (available on the M3903 and M3904) provide a choice of
logging all incoming calls, logging only the unanswered calls, or not logging any
calls. The Call Log holds up to 10 different incoming entries for the M3903 and up
to 100 for the M3904. After you select Call log options from the Options List
menu;
From the Log options menu, use the
Navigation Keys to highlight and
select either:
Log all calls
Log all calls
or
or
Log unanswered calls
Log unanswered calls
Note: New call indication must be set
to On, if you want Call Log notification.
Press the Done Key to save selection. Press the Quit Key or Options Key to exit.
85
Options List
Use Live dial pad
The Live dial pad option (available on the M3904) allows you to press any dial
pad key to automatically access a dial tone. After you select Live dial pad from
the Options List menu;
From the Live dialpad screen, press
the On Key to turn on Live dial pad, or
press the Off Key to turn off Live dial
pad.
On
Off
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Select Preferred name match
The Preferred name match option (available on the M3904) displays the names
of incoming and outgoing callers as stored in your Personal Directory, if the
telephone number matches the one stored in your directory. This option allows you
to personalize the displayed names for incoming and outgoing calls. After you
select Preferred name match from the Options List menu;
From the Name match screen, press
the On Key to turn on Preferred name
match, or press the Off Key to turn off
Preferred name match.
On
Off
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Set up area code
Using the Area code set-up option (available on the M3904) causes the Callers
List and Calling Line ID (CLID) display show the number/extension followed by the
area code/prefix in parenthesis. This makes it easier to identify local calls and
internal calls. You can define up to three codes. After you select Area code
set-up from the Options List menu
Use the Navigation keys to place your
cursor in the first line and enter an
area/country code of your choice.
1st Code: 408
2nd Code:
3rd Code:
Note: You can enter up to three codes of
your choice.
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
86
Options List
Enable Call timer
The Call timer enable option measures how long you are on each call. After you
select Call timer enable from the Options List menu;
From the Call timer screen, press the
On Key to turn on the Call timer, or
press the Off Key to turn off the Call
timer.
On
Off
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Select Date/time format
There are eight Date/time formats. Four formats are based on the 12 hour clock
and four are based on the 24 hour clock. After you select Date/time format. . .
from the Options List menu;
Use the Navigation Keys to scroll
through the eight formats. The sample
formats appear on the upper right side
of the display area.
Format 3
Press the Done Key to select the highlighted format. Press the Quit Key or Options
Key to exit.
Enable Key click
The Key click option causes the handset or speaker to produce a clicking sound
when you press the telephone keys. After you select Key click enable from the
Options List menu;
From the Key click screen, press the
On Key to turn on Key click, or press
the Off Key to turn off Key click.
On
Off
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
87
Options List
Use Headset port on call
The Headset port on call option (available on the M3904) requires that a
lamp-type accessory be connected to the headset port. When the Headset port on
call option is activated and the user is on a call, the lamp lights providing an
indication that a call is in progress. After you select Headset port on call from
the Options List menu;
From the On call screen, press the On
Key to turn on Headset port on call, or
press the Off Key to turn off Headset
port on call.
On
Off
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Note: Additional equipment is required to implement this option. For more
information please contact your Nortel Networks distributor.
Activate Headset port external alerter
When the Headset port external alerter option (available on the M3904) is
activated, it supports a visual or audible alerter and/or recorder device. This
device plugs into the Headset port, which is located on the bottom of the
telephone. After you select Headset port ext alerter from the Options List
menu;
From the External alerter screen, press
the On Key to turn on Headset port
external alerter, or press the Off Key to
turn off Headset port external alerter.
On
Off
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Note: Additional equipment is required to implement this option. For more
information please contact your Nortel Networks distributor.
Use Call indicator light
The incoming call indicator light can be controlled on the M3904. After you select
Call indicator light from the Options List menu;
From the Indicator screen, press the
On Key to turn on Call indicator light,
or press the Off Key to turn off Call
indicator light.
On
Off
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
88
Options List
Set On-hook default path
The On-hook default path option (available on the M3903 and M3904)
automatically opens the voice path on either a Headset (connected to the headset
jack) or on Handsfree when you press a Line (DN) Key. After you select On hook
default path from the Options List menu;
From the On hook path menu, use the
Navigation Keys to highlight and
Handsfree selected
Handsfree selected
or
or
Headset selected
Headset selected
Press the Done Key to save selection. Press the Quit Key or Options Key to exit.
Note: Refer to “Headsets” on page 128 for information on recommended headset
types for your telephone.
Display diagnostics
The Display diagnostics option tests the functionality of your telephone’s display
screen and indicator lights. This option also provides information on the firmware
currently in use on your M3900 series telephone. After you select Display
diagnostics from the Options List menu;
Use the up or down Navigation Key to
scroll through the list and view the
changing display screens.
Press the Done Key to return to the Options List menu. Press the Quit Key or
Options Key to exit.
89
Options List
Activate Group Listening
The Group Listening feature enables you to talk on the handset to one party while
other people listen to the conversation on your telephone’s speaker. The network
administrator must enable this feature. After you select Group listening from the
Options List menu;
From the Group listening screen, press
the On Key to turn on Group listening,
or press the Off Key to turn off Group
listening.
On
Off
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Note 1: The Group listening selection will
not appear in the Options List menu of your
telephone unless this feature has been
enabled by your network administrator.
Note 2: You must let the other party know
when others are listening to the
conversation. This feature does not have a
tone to inform the party on the other end of
the call that the conversation is being
monitored.
90
Call Log and Personal Directory display and navigation
Call Log and Personal Directory display
and navigation
M3903 Call Log display and navigation
The M3903 information display shows one item at a time. Use the Navigation
Keys to scroll through the list. When the item you want appears, press the Select
Key. The figure below shows the status once you log into the Call Log. The M3903
Call Log contains a Callers List and a Redial list. The M3903 does not have a
Personal Directory.
01 Call Log (use
Callers List
)A
Select
Quit
Copy
553-9079
Access your Callers List or Redial List (M3903)
To access the M3903 Call Log using
the Call Log Key:
1. Press the Call Log Key.
Call Log
/
2. Use the Navigation Keys to highlight
the list that you want to view.
Callers List
Redial List
3. Press the Select Key.
Select
91
Call Log and Personal Directory display and navigation
To access the M3903 Callers List or
Redial List using a Context Sensitive
Soft Key or a Programmable Feature
Key:
Press the Callers Key to access the
Callers List, or press the Redial Key to
access the Redial List.
Callers
Redial
or
To exit the M3903 Call Log:
Press the Quit Key or the Call Log Key
Quit
to exit.
or
Call Log
/
M3904 Personal Directory and Call Log display and navigation
With the M3904’s display, you can view three lines of information. The figure
below shows the status once you log into the directory.
01 Directories
Personal DirectoryA
Call Log (Callers List)A
Call Log (Redial List)
Select
Quit
Copy
553-9080
92
Call Log and Personal Directory display and navigation
Access your Personal Directory, Callers List, or Redial List (M3904)
To access the M3904 Directory/Log:
1. Press the Directory/Log Key.
Directory/Log
/
Note: When you press the Directory/Log
Key, your Personal Directory is
automatically selected. At this point, you
may begin searching the directory using
the telephone’s dial pad. See “Search for
an entry” on page 109.
2. Use the Navigation Keys to highlight
the Personal Directory or the Call Log
that you want to view.
Personal Directory
Call Log (Callers List)
Call Log (Redial List)
Select
3. Press the Select Key.
To access the M3904 Callers List or
Redial List using a Context Sensitive
Soft Key or a Programmable Feature
Key:
Press the Callers Key to access the
Callers List, or press the Redial Key to
access the Redial List.
Callers
Redial
or
To exit the M3904 Directory/Log:
Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Directory/Log
/
93
Call Log and Personal Directory display and navigation
Call Log and Personal Directory password protection
(M3903 and M3904)
You can password protect your Callers List and Redial List. Your password also
protects your Personal Directory (M3904 only). If password protection is
activated, you will be asked to enter your password each time you press the Call
Log Key (M3903) or Directory/Log Key (M3904).
To enable password protection:
1. Press the Call Log Key (M3903) or the
Call Log
Directory/Log Key (M3904).
/
or
Directory/Log
/
2. From the Call Log menu (M3903) or
Directories menu (M3904), use the
Navigation Keys to highlight
Password Administration.
Password Administration
Select
Select
On
3. Press the Select Key. The Password
Administration menu appears with
Password enabled: OFF highlighted.
4. Press the Select Key again to select
Password enabled: OFF.
5. Press the On Key to enable password
protection.
6. Dial the password.
Enter
7. Press the Enter Key.
8. Dial the password again to confirm
your password.
94
Call Log and Personal Directory display and navigation
9. Press the Enter Key.
Enter
Done
10. Press the Done Key to save changes.
11. Press the Quit Key or the Call Log Key
(M3903) or the Directory/Log Key
(M3904) to exit.
Quit
or
Call Log
/
or
Directory/Log
/
To disable Personal Directory
password:
1. Press the Call Log Key (M3903) or the
Call Log
Directory/Log Key (M3904).
/
or
Directory/Log
/
2. Dial the password.
Enter
3. Press the Enter Key.
4. Use the Navigation Keys to highlight
Password Administration.
Password Administration
Select
5. Press the Select Key. The Password
Administration menu appears with
Password enabled: ON highlighted.
95
Call Log and Personal Directory display and navigation
6. Press the Select Key again to select
Select
Off
Password enabled: ON.
7. Press the Off Key to disable password
protection.
Done
8. Press the Done Key to save changes.
9. Press the Quit Key or the Call Log Key
(M3903) or the Directory/Log Key
(M3904) to exit.
Quit
or
Call Log
/
or
Directory/Log
/
96
Call Log
Call Log
The Call Log (available on the M3903 and M3904) records the name and number
of incoming and outgoing calls and can be password protected on the M3904.
You can activate Call Log to record all calls, record only the unanswered calls, or
record no incoming calls.
The Callers List stores incoming calls, and the Redial List stores outgoing calls in
order of date and time received/made. The oldest call is stored at the top of the
list. The newest call is stored at the bottom of the list.
The M3904 Call Log list holds up to 100 entries for incoming and 20 entries for
outgoing calls. The M3904 can copy a number from the Callers List or Redial List
and store it in the Personal Directory.
The M3903 Call Log list holds up to 10 entries for incoming and 5 entries for
outgoing calls.
Access and use the Callers List (M3903)
To access the Callers List using the
Call Log Key:
1. Press the Call Log Key.
Call Log
/
2. Use the Navigation Keys to highlight
Callers List.
Callers List
3. Press the Select Key.
Select
4. Press the New Key to go to the top of
the new calls list, or press the Old Key
to go to the top of the old calls list.
New
Old
or
To access the Callers List using a
Context Sensitive Soft Key or a
Programmable Feature Key:
Press the Callers Key.
Callers
If there are new calls, you are
presented with the first call in the new
calls list.
97
Call Log
If there are no new calls, you are
presented with the first call in the old
calls list.
To make a call from the Callers List:
1. Use the Navigation Keys to highlight
the number you want to call.
Note 1: If you are calling an external or
long distance number, you will need to edit
the number to add the access codes
required by your system to make an
external or long distance call.
2498
Note 2: Press the Pause Key to insert a
1.5 second pause in the dialing string.
2. Press the Dial Key to call the number
selected. You leave the Callers List
when you make the call.
Dial
To exit the Callers List without
making a call:
Press the Quit Key or the Call Log Key
Quit
to exit.
or
Call Log
/
Access and use the Callers List (M3904)
To access the Callers List using the
Directory/Log Key:
1. Press the Directory/Log Key.
Directory/Log
/
2. Use the Navigation Keys to highlight
Call Log (Callers List).
Call Log (Callers List)
98
Call Log
3. Press the Select Key.
Select
4. Press the New Key to go to the top of
the new calls list, or press the Old Key
to go to the top of the old calls list.
New
Old
or
To access the Callers List using a
Context Sensitive Soft Key or a
Programmable Feature Key:
Press the Callers Key.
Callers
If there are new calls, you are
presented with the first call in the new
calls list.
If there are no new calls, you are
presented with the first call in the old
calls list.
To make a call from the Callers List:
1. Use the Navigation Keys to highlight
the number you want to call.
Note 1: If you are calling an external or
long distance number, you will need to edit
the number to add the access codes
required by your system to make an
external or long distance call.
2498
Note 2: Press the Pause Key to insert a
1.5 second pause in the dialing string.
2. Press the Dial Key to call the number
selected. You leave the Callers List
when you make the call.
Dial
To exit the Callers List without
making a call:
Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Directory/Log
/
99
Redial List
Redial List
The Redial List (available on the M3903 and M3904) records your last 20
(M3904) or 5 (M3903) outgoing calls and can be password protected. On the
M3904, you can copy these numbers to your Personal Directory.
Access and use the Redial List (M3903)
To access the Redial List using the
Call Log Key:
1. Press the Call Log Key.
Call Log
/
2. Use the Navigation Keys to highlight
Redial List.
Redial List
3. Press the Select Key.
Select
To access the Redial List using a
Context Sensitive Soft Key or a
Programmable Feature Key:
Press the Redial Key. You are
presented with the most recently dialed
number.
Redial
To make a call from the Redial List:
1. Use the Navigation Keys to highlight
the number you want to call.
Note: If you are calling an external or
long distance number, be sure that the
appropriate access codes are included.
5551212
2. Press the Dial Key. Your call is
automatically dialed and you exit the
Redial list.
Dial
100
Redial List
Access and use the Redial List (M3904)
To access the Redial List using the
Directory/Log Key:
1. Press the Directory/Log Key.
Directory/Log
/
2. Use the Navigation Keys to highlight
Call Log (Redial List).
Call Log (Redial List)
Select
3. Press Select.
To access the Redial List using a
Context Sensitive Soft Key or a
Programmable Feature Key:
Press the Redial Key. You are
presented with the most recently dialed
number.
Redial
To make a call from the Redial List:
1. Use the Navigation Keys to highlight
the number you want to call.
Note: If you are calling an external or
long distance number, be sure that the
appropriate access codes are included.
5551212
2. Press the Dial Key. Your call is
automatically dialed and you exit the
Redial List.
Dial
101
Access and use the Personal Directory
Access and use the Personal Directory
The Personal Directory (available on the M3904) provides a personalized
directory of names and telephone numbers. The Personal Directory allows you to
add, delete, search, and edit entries and can be password protected. The
Personal Directory holds up to 100 entries (an entry is one name and one
telephone number). You can add a directory entry by copying the entry from your
Callers List or Redial List. You can also add entries with the “AddNew” Key or by
using the Personal Directory PC Utility application. The Personal Directory PC
Utility uses an accessory cartridge to connect your PC and your M3904
telephone. You can create a directory on your Personal Computer and transfer it
to your M3904 telephone.
Access the Personal Directory
1. Press the Directory/Log Key.
Directory/Log
/
Select
menu to select Personal Directory.
Note: When you press the Directory/Log
Key, your Personal Directory is
automatically selected. At this point, you
may begin searching the directory using
the telephone’s dial pad. See “Search for
an entry” on page 109.
Add a Personal Directory entry
After accessing your Personal
Directory:
1. Press the Add New Key.
AddNew
2. Dial the new name.
102
Access and use the Personal Directory
Example:
To enter the name and telephone
number for Chris:
1. Dial the name using the key pad.
Note: Press the Up Navigation Key to
access special characters you may want to
include in the name. Use the Navigation
Keys to locate the character you want to
include. Press the Select Key to choose the
highlighted character. Press the Return Key
to return to name entry without selecting a
special character.
¤¤¤
››
‡‡‡
›››
‡‡‡‡
2. Press the dial pad key with the desired
letter repeatedly until that letter
appears on the display.
3. Press the right arrow key to go to the
next letter.
Note: The cursor automatically advances
to the next position, if a different-from-last
key is pressed, or after a short pause.
4. Press the Next Key.
Next
5. Use the dial pad to enter the telephone
number associated with the name
entered above.
Note 1: The number may contain up to
31 digits.
Note 2: Press the Pause Key to insert a
1.5 second pause in the dialing string.
Note 3: If you are adding an external or
long distance number, be sure to include
the access codes required by your system to
make an external or long distance call.
6. When you have finished entering all of
the digits, press the Done Key to save
the changes.
Done
103
Access and use the Personal Directory
7. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Directory/Log
/
Add an incoming call
1. Press the Copy Key.
Copy
/
The displays shows the message
Copy to.
2. Press the Directory Key.
Dirctry
3. Press Next to copy the incoming call
without editing the name. Edit the
number, if required (see notes for
step 4) and go to step 5.
or
Next
or
Clear
Press Clear to make changes to the
name before saving. Add the name
using the dial pad, Delete, and Case
Keys as needed.
4. Press the Next Key. Make changes to
Next
the telephone number if required
Note 1: The number may contain up to
31 digits.
Note 2: Press the Pause Key to insert a
1.5 second pause in the dialing string.
Note 3: If you are adding an external or
long distance number, be sure to include
the access codes required by your system to
make an external or long distance call.
5. Press the Done Key to save the entry in
Done
your directory.
104
Access and use the Personal Directory
6. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Note: You can edit the name or number
Directory/Log
before or after you save to the directory.
/
Add an outgoing call
1. After the person you called answers,
Copy
/
press the Copy Key.
The displays shows Copy to.
2. Press the Directory Key.
Dirctry
3. Add the name, using the dial pad,
Delete, and Case Keys as needed.
4. Press the Next Key.
Next
Done
5. Press the Done Key to save the
changes.
6. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Note: You can edit the name or number
Directory/Log
before or after you save to the Directory.
/
105
Access and use the Personal Directory
Delete or edit a Personal Directory entry
To delete a Personal Directory entry:
1. Use the Navigation Keys to highlight
the entry you want to edit or delete.
2. Press the Delete Key to delete the
currently highlighted entry in your
Personal Directory.
Delete
Yes
3. Press the Yes Key to confirm the
deletion.
To edit a Personal Directory entry:
1. Press the Edit Key to change the
Edit
telephone number or name.
2. Use the Navigation Keys to highlight
the character you want to change.
3. Use the dial pad to enter the desired
changes. Refer to“Add a Personal
Directory entry” on page 102 for an
example of how to use the dial pad to
enter names.
4. Press the Next Key. Edit the number if
Next
Done
necessary.
5. Press the Done Key to save the
changes.
6. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Directory/Log
/
106
Access and use the Personal Directory
Delete your Personal Directory
To delete your Personal Directory:
DelList
1. Press the Delete List Key.
The display shows Delete all
entries?.
2. Press the Yes Key if you want to delete
all the entries in your Personal
Directory, or press the No Key if you
want to return to the top of the
Personal Directory with no changes
made.
Yes
No
or
3. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Directory/Log
/
Use the Personal Directory to make a call
To use the Personal Directory to
make a call:
1. Use the Navigation Keys to highlight
the desired name or number.
Note: If you are dialing an external or
long distance number, be sure that your
directory entry includes the access codes
required by your system to make an
external or long distance call.
Purchasing
2. Press the Dial Key.
Dial
Note: If your primary DN is busy, the
following message will be displayed
Unable to Dial - Busy Primary Line.
Press the OK Key to clear the message.
Select an available DN Key, and press the
Dial Key again.
107
Access and use the Personal Directory
Use Card View
The Card View feature provides additional information about the Personal
Directory entry.
To look at the Card View:
1. Use the Navigation Keys to highlight
the desired name.
Purchasing
2. Press the right Navigation Key.
To dial from the Card View:
1. Use the Navigation Keys to show the
name and number of the currently
selected entry in the Card View.
Note: If you are dialing an external or
long distance number, be sure that your
directory entry includes the access codes
required by your system to make an
external or long distance call.
2. Press the Dial Key to place the call.
Dial
Note: If your primary DN is busy, the
following message will be displayed
Unable to Dial - Busy Primary Line.
Press the OK Key to clear the message.
Select an available DN Key, and press the
Dial Key again.
To exit the Card View:
Press the left Navigation Key to leave
the Card View and return to the
selected name.
108
Access and use the Personal Directory
Search for an entry
You can search for a particular entry in your Personal Directory.
To search for an entry:
1. Use the Navigation Keys to highlight
Personal Directory.
Personal Directory
Select
2. You may press the Select Key or
proceed directly to step 3.
3. Use the dial pad to enter the first letter
of the name your are seeking. For
example, press the ¤ key twice to go
to the first entry that begins with the
letter “B”.
Note: To further refine your search, wait a
couple of seconds and use the dial pad to
enter the second letter of the name you are
seeking. You may enter up to the first three
letters in the name using this method.
Copy a number from the Redial List
You can copy a number from the Redial List to the Personal Directory.
To copy a number from the Redial
List:
1. Use the Navigation Keys to highlight
the name or number in your Redial List
that you want to copy to your Personal
Directory.
2498
2. Press the Copy Key.
Copy
/
The displays shows Copy to.
3. Press the Directory Key.
Dirctry
109
Access and use the Personal Directory
4. Press Next to copy the incoming call
Next
without editing the name. Edit the
number, if required (see notes for
step 5), and go to step 6.
or
or
Clear
Press Clear to make changes to the
name before saving. Add the name
using the dial pad, Delete, and Case
Keys as needed.
5. Press the Next Key. Make changes to
Next
the telephone number, if required.
Note 1: The number may contain up to
31 digits.
Note 2: Press the Pause Key to insert a
1.5 second pause in the dialing string.
Note 3: If you are copying an external or
long distance number, be sure that your
directory entry includes the access codes
required by your system to make an
external or long distance call.
6. Press the Done Key. The entry is saved
to your Personal Directory and you are
returned to the Redial List.
Done
110
Set-to-Set Messaging
Set-to-Set Messaging
With the Set-to-Set Messaging application activated (available on the M3903
and M3904), an internal caller using an M3903 or an M3904 receives a quick
visual message, which you have selected, whenever they dial your telephone
number. The length of your message is limited to 24 characters. The message is
entered through the dial pad keys using a process similar to the one used for
entering names in the M3904’s Personal Directory. Your network administrator
may provide access to a list of up to ten messages which you may customize and
select as your current set-to-set message. Only one message at a time may be
customized and only one message can be stored.
You can check your Call Log to determine whether or not a caller was sent the
set-to-set message. A * (M3903) or
(M3904) will appear beside the call log
entry of the callers who saw your message. Note: This feature is not available on
the Meridian SL-100.
To access Set-to-Set Messaging:
1. Press the Applications Key.
Applications
/
2. From the Applications menu, use the
Navigation Keys to highlight Set to
Set Messaging.
Set to Set Messaging
3. Press the Select Key.
Select
The Set-Set Msg screen appears
indicating the status of the feature (on
or off) and whether or not a message
is stored (defined) in memory.
Note: On the M3904, if you have
activated password protection on your
Directory/Log, you will need to enter your
password to continue.
To edit the currently stored message,
or to create a new message:
1. Press the Edit Key.
Edit
111
Set-to-Set Messaging
2. From the Edit Mode screen, use the
the Delete Key to delete a character.
Press the Case Key to toggle between
upper and lower case characters.
Press the Cancel Key to exit the screen
without saving changes.
Note 1: Please refer to “Add a Personal
Directory entry” on page 102 for detailed
instructions on using your telephone’s dial
pad to enter text.
Note 2: While in the Edit Mode screen,
press the Up Navigation Key to access
special characters you may want to include
in your message. Use the Navigation Keys
to locate the character. Press the Select Key
to choose the highlighted character. Press
the Return Key to return to message entry
without selecting a special character.
3. Press the Done Key.
Done
Your message is saved and you return
to the Set-Set Msg Screen.
To select a message provided by
your network administrator:
1. From the Set-Set Msg screen, use the
Navigation Keys to scroll through the
list of available messages.
2. Press the Select Key to choose the
Select
currently displayed message.
To customize a message provided by
your network administrator:
1. From the Set-Set Msg screen, use the
Navigation Keys to scroll through the
list of available messages.
2. Press the Edit Key to choose the
Edit
currently displayed message.
112
Set-to-Set Messaging
3. From the Edit Mode screen, use the
Press the Delete Key to delete a
character. Press the Case Key to toggle
between upper and lower case
characters. Press the Cancel Key to
exit the screen without saving changes.
Note 1: Please refer to “Add a Personal
Directory entry” on page 102 for detailed
instructions on using your telephone’s dial
pad to enter text.
Note 2: While in the Edit Mode screen,
press the Up Navigation Key to access
special characters you may want to include
in your message. Use the Navigation Keys
to locate the character. Press the Select Key
to choose the highlighted character. Press
the Return Key to return to message entry
without selecting a special character.
4. Press the Done Key.
Done
Your message is saved and you return
to the Set-Set Msg Screen.
Note: If you scroll to a different message in
the Set-Set Msg screen, and press the
Select Key, your changes are erased.
To activate or deactivate Set-to-Set
Messaging and exit the application:
1. Press the On Key/Off Key to toggle
the Set-to-Set Messaging status
between On and Off.
On
Off
/
Note 1: If messages have not been
provided by your network administrator
and a message has not been defined, the
On and Off Keys will not appear. Use the
Edit Key to enter a message before
activating Set-to-Set Messaging.
113
Corporate Directory
Note 2: If messages have been provided
by your network administrator, up and
down arrows appear on the right side of
the display. The On and Off Keys appear
for the most recently selected message.
2. Press the Quit Key or the Applications
Key to exit the Set-to-Set Messaging
application.
Quit
or
Applications
Note: If you press the Quit Key or the
Applications Key before you press the
Done Key, you exit the application without
saving your changes.
/
Corporate Directory
The Corporate Directory application (available on the M3903 and M3904)
allows you to search by entering the characters in the name of the person you are
calling, beginning with the last name. Once you have located the name and
number of the person, you may use the dial soft key to call the number. On the
M3904, you may copy an entry from the Corporate Directory and paste it into
your telephone’s Personal Directory for quick access.
To use the Corporate Directory
application:
1. Press the Applications Key.
Note: If, when you press the Applications
Key, Corporate Directory is highlighted,
you may proceed directly to step 4.
Applications
/
2. From the Applications menu, use the
Navigation Keys to highlight
Corporate Directory.
Corporate Directory
3. Press the Select Key.
Select
The Corporate Directory Find screen
appears.
4. Use the dial pad to enter the name of
the person you want to call. Enter the
last name first. Separate the last name
and first name with a comma.
Note 1: The comma is the first character on
the ⁄ Key on your dial pad.
114
Corporate Directory
Note 2: You do not need to enter the
entire name. When the Done Key is
pressed, the application will highlight the
first directory entry that matches the text
that you entered.
5. Press the Done Key.
Done
The application highlights the first
entry that matches the text you entered
in step 4. If there is no match, the
screen displays No matches found for
. . . (the text that you entered).
6. Use the Navigation Keys to scroll
through the directory.
Note: The entire directory is available. The
“find” process determines which directory
entry to select as your starting point.
7. If desired, use the Right Navigation
Key to move from “list” view to “card”
view. In card view, the telephone and
department numbers for the entry are
viewable. Use the Left Navigation Key
to return to list view.
Note: While you are in card view, you
may use the Up or Down Navigation Key
to scroll through directory entries.
8. Press the Dial Key to call the person
Dial
whose name is highlighted.
Note: On the Meridian SL-100, if your
primary DN Key is busy, select an
available DN Key and then press the Dial
Key.
To find another directory listing or to
refine your current directory search:
Press the NewFind Key to begin a new
search, or press the Resume Key to
enter additional characters so that you
may narrow your search.
NewFind
Resume
or
115
Corporate Directory
To exit the Corporate Directory
application:
Press the Quit Key or the Applications
Quit
Key.
or
Applications
/
To copy an entry from the Corporate
Directory to your telephone’s
Personal Directory:
1. With the entry selected in the
Corporate Directory, press the Copy
Key.
Copy
/
2. In the Copy to screen, press the
Directory Key to copy the name and
telephone number to your Personal
Directory.
Dirctry
After you complete editing and
entering the name and telephone
number, you are returned to the
Corporate Directory.
To transfer a call to a number in the
Corporate Directory:
1. Before accessing the Corporate
Transfer
Directory, press the Transfer Key.
2. Press the Applications Key.
Applications
/
Follow the steps outlined in “To use the
Corporate Directory application:” on
page 114 to find the person to whom
you want to transfer the call.
3. Press the Dial Key to transfer the call to
Dial
the person whose name is highlighted.
116
Virtual Office
Virtual Office
The Virtual Office feature (available on the M3903 and M3904) allows you to log
into a specially designated M3903 or M3904 telephone. When you log into the
telephone your individual configuration is downloaded to the telephone for line
(DN) and feature access. Virtual Office is ideal for use on a telephone which may
be assigned to different users depending on the hour-of-the-day or the
day-of-the-week.
To logon to the Virtual Office
telephone:
1. Lift the handset.
2. Dial the Virtual office Terminal Log oN
(VTLN) FFC on the Meridian 1 or the
Virtual Office Worker IN (VOWIN)
FAC on the Meridian SL-100.
3. On the Meridian 1, from the VTN
Login screen, Enter your password
using the telephone’s dial pad.
On the Meridian SL-100, you receive
dial tone. Enter the VOW
authorization code, if required on
your system; then, after you receive
dial tone, Enter your personal
authorization code.
Note: If you make a mistake while entering
a code or number on the Meridian SL-100,
press the • Key and re-enter the code.
4. On the Meridian 1 you are prompted
to Enter your User ID. Use the dial
pad to Enter the primary line (DN)
assigned to your Virtual Office
telephone.
On the Meridian SL-100, you receive
dial tone. Use the dial pad to Enter the
primary line (DN) for your telephone;
then, after you receive dial tone, Enter
your passcode.
117
Virtual Office
Note 1: If your Virtual Office telephone is
configured as an M3903, you may only
login to an M3903. If your Virtual Office
telephone is configured as an M3904, you
may only login to an M3904.
Note 2: If two or more users are
attempting to log on at the same moment,
the system processes the log on information
for the first user. The other user(s) will
receive a System busy, try later.
message. Wait a moment and try to log on
again.
To log off the Virtual Office
telephone:
1. Lift the handset.
2. Dial the Virtual office Terminal Log ofF
(VTLF) FFC on the Meridian 1 or the
Virtual Office Worker OUT
(VOWOUT) FAC on the
Meridian SL-100.
or
or
If available, Press the autodial key
which has been configured to dial the
VTLF FFC.
VTLF FFC
Note 1: You can not be logged on to more
than one Virtual Office telephone at any
time.
Note 2: Your network administrator
determines whether or not your Callers List
and Redial List are erased when you log off
the Virtual Office telephone. This automatic
erase feature is not available on the
Meridian SL-100.
118
M3901 Feature Operation
M3901 Feature Operation
M3901 is a one line telephone. The M3901 operates in a different way than the
other M3900 series Digital Telephones. This section explains in some detail the
M3901 operation.
The M3901 supports five programmable features. You activate the features when
you press the M3901 Feature Key and a dial pad number key for that feature.
Your system administrator programs the features for your telephone. There is a
feature card placed on your telephone, which lists the features and instructions.
M3901 Fixed Keys
Goodbye Key
To end a call:
Press the Goodbye Key to terminate a
call.
Goodbye
/
or
or
Replace the handset to terminate a
call.
Hold Key
To put a call on Hold:
Press the Hold Key to put an active call
on hold.
Hold
/
To take a call off Hold:
Press the Line (DN) Key to take the call
off hold.
Line
/
Note: When a call is on hold, the Message
Waiting Call Status Indicator flashes to
serve as a reminder.
119
M3901 Feature Operation
Line (DN) Key
To use the Line (DN) Key to make a
call:
1. Press the Line (DN) Key.
Line
/
or
or
Lift the handset. The Line (DN) Key is
automatically selected.
2. Dial the telephone number.
Volume Control Bar
Use the Volume Control Bar to raise or lower the volume on the ringer or handset.
To adjust the ringer volume:
While the telephone is ringing, press
the right side of the Volume Control
Bar to raise the ringer volume or press
the left side of the Volume Control Bar
to lower the ringer volume.
To adjust the handset volume (voice
or dial tone):
With sound coming from the handset,
press the right side of the Volume
Control Bar to raise the handset
volume or press the left side of the
Volume Control Bar to lower the
handset volume.
Features Key
To activate a feature:
Fx
Feature
/
1. Press the Features Key.
2. Press the Dial Pad Number Key
assigned to the feature you want to
use.
120
M3901 Feature Operation
Program a feature or an Auto Dial
Your network administrator may configure up to five features for your telephone.
The Features Card on the right side of the M3901 lists each feature and the Dial
Pad Number Key used to activate the feature.
After you press the Feature Key, you have 30 seconds to press a Dial Pad Number
Key or the process ends.
To activate a feature:
1. Press the Features Key.
Fx
Feature
/
2. Press the Dial Pad Number Key
assigned to the feature you want to
use.
To deactivate the active feature:
1. Press the Features Key.
Fx
Feature
/
£
2. Press the £ Key.
To program an Auto Dial Key:
1. Without lifting the handset, press the
Fx
Feature
/
Features Key.
2. Press the Dial Pad Number Key for the
Auto Dial position you want to
program. The Feature Activation
Indicator flashes.
3. Dial the number you want to program
to the Auto Dial position.
4. Press the Features Key.
Fx
Feature
/
5. Press the Dial Pad Number Key for the
Auto Dial position you just
programmed.
121
M3901 Feature Operation
Use Auto Dial
Auto Dial lets you dedicate a feature position to a specific telephone number.
When the Features Key and assigned Dial Pad Number Key are pressed, the
number is dialed automatically. This feature must be enabled by your network
administrator.
1. Lift the handset.
2. Press the Features Key.
Fx
Feature
/
3. Press the Dial Pad Number Key for the
Auto Dial position assigned to the
number you want to call.
The number dials automatically.
Use Speed Call
The Speed Call feature allows you to automatically dial frequently called numbers
by entering a one, two, or three digit code. Contact your network administrator to
determine the capacity of your Speed Call list.
A telephone designated as a Speed Call Controller can program or edit the Speed
Call list. This feature must be enabled by your network administrator.
To store a Speed Call Entry:
1. Without lifting the handset, press the
Fx
Feature
/
Features Key.
2. Press the Dial Pad Number Key
assigned to the Speed Call Controller
feature. The Feature Activation
Indicator flashes.
3. Dial a 1 to 3 digit Speed Call code
(ask your network administrator for the
number of digits required.)
4. Dial the number you want to program
to the Speed Call code entered in the
previous step.
5. Press the Features Key.
Fx
Feature
/
6. Press the Dial Pad Number Key for the
Speed Call Controller feature.
122
M3901 Feature Operation
To make a Speed Call:
1. Lift the handset.
2. Press the Features Key.
Fx
Feature
/
3. Press the Dial Pad Number Key for the
Speed Call Controller feature or the
Speed Call User feature.
4. Dial the Speed Call code of the
number you want to call.
The Speed Call feature automatically
dials the number.
Use Call Transfer
Use the Transfer feature to redirect a call to a third party.
To use the Transfer feature:
1. Press the Hold Key to put the active
Hold
call on hold.
/
/
Note: The previous step is not required if
the Automatic Hold feature is active.
2. Press the Features Key.
Fx
Feature
3. Press the Dial Pad Number Key for the
Transfer feature.
4. Dial the number where you want to
transfer the call.
5. Press the Features Key when you hear
Fx
Feature
/
ringing tone.
6. Press the Dial Pad Number Key for the
Transfer feature.
Note: On the Meridian SL-100 use steps
one to three then hang up. If you continue,
a three way conversation is established.
123
M3901 Feature Operation
Set up a Conference call
You can set up a Conference call for up to six people (including yourself). Contact
your network administrator to determine the maximum number of people your
system allows on a conference call.
To use the Conference Call feature:
1. Press the Hold Key to put the active
Hold
call on hold.
/
Note: The previous step is not required if
the Automatic Hold feature is active.
2. Press the Features Key.
Fx
Feature
/
3. Press the Dial Pad Number Key for the
Conference feature.
4. Dial the number of the party you want
to add to the call.
5. Press the Features Key.
Fx
Feature
/
6. Press the Dial Pad Number Key for the
Conference feature.
Note 1: Repeat these step to add more
parties to the conference (up to six).
Note 2: Press the Goodbye Key, if you
make an error while dialing the number or
if you receive a busy signal.
To return to the original caller:
Press the Line (DN) Key.
Line
/
124
M3901 Feature Operation
Activate Ring Again
Use the Ring Again feature when you dial a number and receive a busy tone or
no answer. The Ring Again feature lets you know when the person you dialed is
available or has used their telephone. The feature notifies you when to redial your
party. The Ring Again feature automatically redials the number.
To activate the Ring Again feature:
1. Dial a number and receive a busy tone
or no answer.
Note: The Meridian SL-100 supports Ring
Again on busy tone only.
2. Press the Features Key.
Fx
Feature
/
3. Press the Dial Pad Number Key for the
Ring Again feature.
4. Replace the handset.
To use Ring Again to call your party
when you receive notification:
1. Lift the handset.
2. Press the Features Key.
Fx
Feature
/
3. Press the Dial Pad Number Key for the
Ring Again feature. Ring Again dials
the number.
To cancel the Ring Again feature:
Fx
1. Press the Features Key.
Feature
/
2. Press the Dial Pad Number Key for the
Ring Again feature before you hear
the Ring Again notification tone.
125
M3901 Feature Operation
Make a call
To dial a number while on-hook:
1. Press the Line (DN) Key.
Line
/
2. Dial the number.
3. Lift the handset and speak when the
party answers.
To use handset and dial number:
1. Lift the handset, the telephone
automatically selects the Line (DN).
2. Dial the telephone number.
Receive a call
To receive a call:
Lift the handset when the telephone
rings and begin to talk.
Feature Activation Indicator
The Feature Activation Indicator (FAI) serves all five programmable feature keys.
The feature indicator LED winks or lights when a feature is active.
Message Waiting and Call Status Indicator
The Message Waiting Indicator (MWI) provides three functions. the MWI flashes
for an incoming call, the MWI also flashes to indicate a call on Hold. The MWI
produces a steady light to indicate that a message is waiting. The MWI cannot
show there is a message waiting if a call is on hold or if there is an incoming call.
126
Accessories for the M3900 Series telephones
Accessories for the M3900 Series telephones
Optional items are available for use with your M3900 Series Digital telephone.
Please contact your System Administrator for additional details.
Note: Wall attachment is available for all four models.
Accessory Connection Module (ACM)
The Accessory Connection Module (ACM) provides the interface for adding the
Analog Terminal Adapter, External Alerter and Recorder Interface, Computer
Telephony Integration Adapter, and Personal Directory PC Utility Cartridge. The
ACM is available for the M3902, M3903 and M3904.
Analog Terminal Adapter (ATA)
The Analog Terminal Adapter (ATA) allows you to connect an analog device such
as a modem or fax machine to your telephone. The ATA is available for the
M3902, M3903, and M3904 models.
Computer Telephony Integration Adapter (CTIA)
The Computer Telephony Integration Adapter (CTIA) provides an interface
between M3900 Series telephones (M3902, M3903, and M3904) and your PC
for first party call control applications. The CTIA also functions as a Personal
Directory PC Utility Cartridge when used with the optional Personal Directory PC
Utility software. This accessory is not supported on the Meridian SL-100.
Display-based Expansion Module
The Display-based Expansion Module provides additional line (DN) or feature
keys for the M3904. The Display-based Expansion Module has eight keys on
three different layers for a total of 24 additional line (DN) or feature keys. The
three layers are accessed through the use of a “page” key. The M3904 will
support one Display-based Expansion Module.
External Alerter and Recorder Interface
The External Alerter and Recorder Interface lets you connect a remote ringer to
your telephone. The External Alerter and Recorder interface is available for the
M3902, M3903, and M3904 models.
127
Accessories for the M3900 Series telephones
Full Duplex Hands Free Module
The Full Duplex Hands Free Module provides simultaneous audio paths for
transmitting and receiving during hands free calls. The Full Duplex Handsfree
Module is available for the M3904.
Headsets
Amplified headsets are compatible with your M3900 Series Meridian Digital
Telephone. The amplified headset is an option for noisy environments. An
amplified headset should be connected to the handset jack. The Headset Key is
not able to control a headset that is connected to the handset jack. In this
configuration, do not select Headset as the On hook default path.
For an amplified headset, adjust the volume using the Volume Control Bar on
your telephone before adjusting the volume on your headset amplifier. To
minimize distortion, the volume setting on the amplifier should be higher than the
volume setting on the telephone.
Unamplified headsets are compatible with the M3903 and M3904. An
unamplified headset should be plugged into the headset jack. With Headset
selected as the On hook default path, you can make calls or answer incoming
calls by pressing a DN Key.
For an unamplified headset, access Volume Adjustment in the Options List to
adjust the headset volume and sidetone (M3904) that work best with the headset
you are using. You may also use the Volume Control Bar to adjust the headset
volume while you are on a call.Refer to your distributor for the latest product
bulletin from Nortel Networks for recommended headset types for the M3900
Series telephones.
Key-based Expansion Module
The Key-based Expansion Module provides additional line (DN) or feature keys
for the M3904. You can add up to two Key-based Expansion Modules, for a total
of 44 additional line (DN) or feature keys.
Personal Directory PC Utility
The Personal Directory PC Utility provides a faster, easier way to create or modify
the Personal Directory on the M3904. You can enter names and numbers into a
directory file on your PC, and download the file directly from the PC to the M3904
through a serial port connection. You can also upload the Personal Directory from
the M3904 to your PC so that you can modify the directory. The PC and the
M3904 are connected using the Personal Directory PC Utility Cartridge. The
Computer Telephony Integration Adapter (CTIA) may also be used to connect the
PC and the M3904 when used with the optional Personal Directory PC Utility
software.
128
Flexible Feature Codes/Feature Access Codes
Meridian 1 Flexible Feature Codes (FFCs)
Call Detail Recording
Charge Account
Make Set Busy Deactivate
Malicious Call Trace
Override
Call Forward All Calls
Activate
Call Forward All Calls
Deactivate
Call Forward All Calls Verify
Radio Paging
Internal Call Forward
Activate
Radio Paging Access
Internal Call Forward
Deactivate
Radio Paging Answer
Ring Again Activate
Ring Again Deactivate
Remote Call Forward
Activate
Remote Call Forward
Deactivate
Park Call
Speed Call Controller
Park Call Access
Speed Call User
Pickup Ringing Number
Pickup Group
System Speed Call User
Station Control Password Change
Virtual Office Terminal Log On
Virtual Office Terminal Log Off
Automatic Wake-Up Activate
Automatic Wake-Up Deactivate
Automatic Wake-Up Verify
Pickup Directory Number
Electronic Lock Activate
Electronic Lock Deactivate
Group Call
Make Set Busy Activate
129
Flexible Feature Codes/Feature Access Codes
Meridian SL-100 Feature Access Codes (FACs)
Account Code
Last Number Redial
Anonymous Caller Rejection
(ACRJ) Activate
Malicious Call Hold (MCH)
Anonymous Caller Rejection
(ACRJ) Deactivate
Paging access code
Automatic Callback (ACB)
Activate
Random Make Busy (RMB)
Automatic Callback (ACB)
Deactivate
Secondary MADN Call
Forwarding (CFMDN)
Automatic Recall (AR)
Activate
Selective Call Forward (SCF)
Automatic Recall (AR)
Deactivate
SIM Ring
Busy Override
System Call Park
Call Forward Busy/Don’t
Answer - Internal/External
Station Origination Restrictions
Controller (SORC)
Calling Name and Number
Delivery Blocking
Station Specific AuthCode (SSAC)
Customer Originated Trace
(COT)
Uniform Call Distribution (UCD)
Directed Call Park (DCPK)
Virtual Office Worker IN
(VOWIN)
Directed Call Pick-up (DCPU)
Virtual Office Worker OUT
(VOWOUT)
Executive Busy Override
(EBO)
Wake-Up Request
Flexible Station Controlled
Conference (CNF)
Wake-Up Cancel
130
Index
Call Join
M3903, M3904 47
A
access the Personal Directory 102
Accessory Connection Module (ACM)
127
account code 54, 56
Analog Terminal Adapter (ATA) 127
announcement 53, 65
Anonymous Caller Rejection 72
answer calls 24
M3903, M3904 30
call transfer
M3903, M3904 26
Call Waiting 38
M3903 97
Blocking 76
M3902 33
applications
Corporate Directory 114
Set-to-Set Messaging 111
Applications Key 6
area code setup 86
attendant 8
Attendant Recall 28
Auto Dial 16, 121, 122
display number 16
Auto Dial Transfer 52
Automatic Answerback 36
Automatic Callback 73
Automatic Hold 123, 124
Automatic Recall 74
Automatic Wake-Up 67
B
busy 51
Busy Override 61
buzz 52
C
M3903, M3904 33
call accounting 33
Call Charge
Centrex/Exchange Switchhook Flash
53
charge account 33, 55
Charge Account, Forced
M3902 54
M3903, M3904 56
charge calls
M3902 54
M3903, M3904 56
Call Detail Recording Charge Account
54, 55
Call Forward
Internal 41
M3902 39
M3903, M3904 40
Remote 42
Selective 76
call hold 25
call indicator light 88
131
Index
M3902 54
M3903, M3904 56
Computer
Telephony
Adapter (CTIA) 127, 128
Conference 35, 48, 124
M3902 45
Integration
M3903, M3904 46
Indicator
Context Sensitive Soft Keys 3, 4, 8
copy from Redial List 109
Copy Key 6, 8
feature key
feature operation
Fixed Keys 8
forward calls
Corporate Directory 114
Customer Originated Trace 75
D
date format 87
Date/time display 8
Dial Key 7
Dial Tone
interrupted 8
dial tone, special 9
dialing
on-hook 14, 16
predial 14
Directed 29
Directed Call Park (DCPK) Key 29
directory 92
password protection 94
Directory Number (DN) 8, 69, 71
Directory Number (DN) Key 6, 7
102
display
Group Listening 12
M3902 77
M3903 77
M3904 78
display diagnostics 89
Display Key 34
Display-based Expansion Module 127
DN 8
handsfree 5, 10
Handsfree Key 5, 10
Headset Key 5, 11
headset port external alerter 88
headset port on call 88
headsets 128
Done Key 6, 79
E
Electronic Lock 44
Enhanced Override 58
Hold 25, 38
Hold Key 5, 119
132
hook switch 9
Hospitality features 67
Hot Line 22
Options Key 6, 79
Primary Directory Number (PDN)
Programmable Line (DN)/Feature
Key 7, 82
Quit Key 6, 79
I
indicator 8
Information display 8
Information line 8
Intercom 23
Internal Call Forward 41
Interrupted dial tone 8
J
join a call
M3902 47
M3903, M3904 47
K
key click 87
Last Number Redial 19
key layout
M3901 1
M3902 2
M3903 3
M3904 4
keys
Applications Key 6
Call Log 6
Call Log Key 94, 95
Copy Key 6, 8
Dial Key 7
Directory/Log Key 6, 93, 94, 95,
96, 102
Display Key 34
Done Key 6, 79
Feature Key 80, 82
Features Key, M3901 120
Fixed Keys 8
Goodbye Key 5, 10, 119
Handsfree Key 5, 10
Headset Key 5, 11
Hold Key 5, 119
Line (DN) Key 5, 6, 7
Line (DN) Key,M3901 120
M3901 keys 119
Message Key 6
Feature Activation Indicator (FAI)
126
Speed Call 122
M3902
display 77
key layout 2
Options List 79
M3903
Callers List 97
133
Index
display 77
key layout 3
Options List 79
Redial List 100
page 53
M3904
park
Callers List 98
Directories 92
display 78
key layout 4
M3903, M3904 30
password
Options List 79
Personal Directory 102
Personal Directory, access 93
Redial List 101, 109
Maid Identification 70
make a call
M3901 126
Make Set Busy 51
Malicious Call Hold (MCH) 35
Malicious Call Trace 35
Meridian 1 9
42, 49, 54, 56, 59, 63, 65, 67, 117,
123, 125
Message Key 6
Message Registration 69
make calls from directory 107
pickup 37
Private Line 9
Programmable Line (DN)/Feature Key
Message
Waiting
Indicator
(MWI),M3901 126
More... Key 7, 9
Multiple Appearance Directory Num-
ber (MADN) 9, 62
mute 10
Mute Key 5, 10
N
Navigation Keys 6, 79
O
Radio Paging 63
recall
off-hook 9
attendant 28
on-hook default path 89
on-hook dialing 14, 16
Options Key 6, 79
Options List 79
Override 58, 61
override
Timed Reminder Recall 27
receive calls
M3901 126
M3902, M3903, M3904 24
Redial 19
Redial List 9, 97, 100, 109
134
Index
access,M3904 93
M3903 100
M3904 101
Remote Access Directory Number 42
Remote Call Forward 42
Ring Again
M3901 125
M3902 17
M3903,M3904 18
ring tone 9, 59, 60
ring type 85
M3903, M3904 26
Voice Messaging control 65
ringback 9, 59, 60
Room Status 71
S
screen contrast 84
secure your telephone 44
Select Key 79
Selectable Conferee Display and Dis-
connect 48
VTLN 117
Selective Call Forward 76
Set-to-Set Messaging 111
shared Directory Number (DN) 9
Shift Key 6
103, 112, 113
special dial tone 8, 9
Speed Call 122
M3902 20
M3903, M3904 21
Speed Call Controller 123
M3902 20
M3903, M3904 21
Speed Call User 123
Speed Call, System 22
Station Camp-on 60
Station Control Password 42, 43, 44
switch hook 9
System Park DN 29
System Speed Call 22
T
time
format 87
wake-up, automatic 67
135
Index
136
While you are away from your desk: Call Forward
38
Title to and ownership of Meridian SL-1 software shall at all times
remain with Nortel Networks. Meridian SL-1 software shall not be
sold outright and the use thereof by the customer shall be subject
to the parties entering into software agreements as specified
by Nortel Networks.
Information contained in this document is subject to change.
Nortel Networks reserves the right, without notice, to make
changes in equipment design or program components as progress
in engineering, manufacturing or technology may warrant.
Reordering number: NT2F79EB A0858904
(c/o 5 each per package P0942070)
Internal Manufacturing part number:
P0942070
Issue 1.00
January 2002
Printed in Canada
www.nortelnetworks.com
|