SGH-D830
User’s Guide
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any
area and always switch off your phone
whenever it is forbidden to use it, or when it
may cause interference or danger.
Use only Samsung-approved batteries and
accessories such as headsets and PC data
cables. Use of any unauthorised accessories
could damage you or your phone and may
be dangerous.
Water resistance
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Your phone is not water-resistant. Keep it
dry.
Sensible use
Use only in the normal position (held to the
ear). Avoid unnecessary contact with the
antenna when the phone is switched on.
At very high volumes, prolonged
listening to a headset can damage
your hearing.
Emergency calls
Qualified service
Key in the emergency number for your
present location, then press
Only qualified service personnel may repair
your phone.
.
Keep your phone away from small
children
For more detailed safety information, see
"Health and safety information" on page 99.
Keep the phone and all its parts, including
accessories, out of the reach of small
children.
1
•
Camera and camcorder
Use the camera module
on your phone to take a
photo or record a video.
About this Guide
This User’s Guide provides you with
condensed information about how to use
your phone. To quickly learn the basics for
your phone, please refer to “Get started”
and “Step outside the phone.”
In this guide, the following instruction icons
appear:
Special
features of your phone
Indicates that you need to pay
careful attention to the subsequent
information regarding safety or
phone features.
•
Image editor
Crop, resize, rotate, and
decorate your photos.
Indicates that you can get more
information on the referenced page.
ꢀ
•
•
Music player
Play music files using your
phone as a music player.
Indicates that you need to press the
Navigation keys to scroll to the
specified option and then select it.
→
Indicates a key on the phone. For
[
]
example,
[
]
Photo printing
Print your photos to
preserve your best
moments forever.
Indicates a soft key, whose function
is displayed on the phone screen. For
< >
example, <Menu
>
2
•
Offline mode
Switch your phone to
offline to use its
non-wireless functions in
an airplane.
•
•
•
Phone to TV
View photos and video
clips captured with the
phone on your TV screen.
•
•
E-mail
File viewer
Send and receive e-mails
with image, video, and
audio attachments.
Open documents in
various formats on the
phone without corruption.
Multimedia Message
Service (MMS)
Bluetooth
Transfer media files and
personal data and connect
to other devices using
free, wireless Bluetooth
technology.
Send and receive MMS
messages with a
combination of text,
image, video, and audio.
•
•
Java
Enjoy Java™-based
embedded games and
download new games.
•
Web browser
Access the wireless web
to get up-to-the-minute
information and a wide
variety of media content.
Voice recorder
Record memos or sounds.
3
Browse the web ....................................... 19
Use Phonebook ........................................ 19
Use a memory card .................................. 25
Watch the phone display on a TV................ 27
Contents
Unpack
6
6
7
Make sure you have each item
Enter text
28
30
34
97
AB, T9, Number, and Symbol modes
Your phone
Keys, features, and locations
Call functions
Advanced calling features
Get started
First steps to operating your phone
Menu functions
Install and charge the phone....................... 7
Power on or off.......................................... 8
Keys and display ....................................... 9
Access menu functions ............................. 12
Customise your phone.............................. 13
Make/Answer calls ................................... 16
All menu options listed
Solve problems
Help and personal needs
Health and safety information
Index
99
Step outside the phone
16
Begin with your camera, the music player, the
web, and other special features
107
Use the camera ....................................... 16
Play music .............................................. 17
4
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
3 Applications (continued)
6 My files (continued)
1 Call log
ꢀp. 34
10 Stopwatch
11 Key management
12 Memo
ꢀ
ꢀ
ꢀ
ꢀ
p. 48
p. 49
p. 49
p. 49
5 Other files
ꢀ
ꢀ
ꢀ
p. 73
p. 75
p. 75
1 Recent contacts
2 Missed calls
3 Dialled calls
4 Received calls
5 Delete all
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p. 34
p. 35
p. 35
p. 35
p. 35
p. 35
p. 36
6 Memory card3
7 Memory status
13 SIM AT1.
7 Calendar
8 Camera
9 Settings
ꢀp. 75
ꢀp. 78
ꢀp. 84
4 Browser
ꢀ
p. 50
6 Call time
7 Call costs1
1 Home
2 Enter URL
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p. 50
p. 51
p. 51
p. 52
p. 52
p. 52
p. 52
p. 53
2 Phonebook
ꢀp. 36
3 Bookmarks
4 Saved pages
5 History
6 Clear cache
7 Browser settings
8 Streaming settings2
1 Contact list
2 Create contact
3 Group
ꢀp. 36
ꢀp. 37
ꢀp. 38
ꢀp. 38
ꢀp. 39
ꢀp. 39
ꢀp. 39
ꢀp. 40
1 Time and date
2 Phone settings
3 Display settings
4 Sound settings
5 Light settings
6 Network services
7 Bluetooth
8 Security
9 Connection settings
10 Reset settings
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p. 84
p. 85
p. 86
p. 87
p. 88
p. 89
p. 91
p. 94
p. 95
p. 97
4 Speed dial
5 My namecard
6 Own number
7 Management
8 Service number1.
5 Messages
ꢀ
p. 53
1 Create message
2 My messages
3 Templates
4 Delete all
5 Settings
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p. 53
p. 57
p. 62
p. 62
p. 63
p. 68
3 Applications
ꢀp. 40
1 Music player
2 Voice recorder
3 Image editor
4 Java world
5 World clock
6 Alarm
7 Calculator
8 Converter
9 Timer
ꢀp. 40
ꢀp. 43
ꢀp. 44
ꢀp. 45
ꢀp. 46
ꢀp. 47
ꢀp. 47
ꢀp. 48
ꢀp. 48
6 Memory status
1. Shows only if supported by your
SIM card.
2. Show only if supported by your
service provider.
3. Shows only if a memory card is
inserted.
6 My files
ꢀ
p. 69
1 Images
2 Videos
3 Music
ꢀ
ꢀ
ꢀ
ꢀ
p. 69
p. 70
p. 72
p. 72
4 Sounds
5
Unpack
Your phone
Make sure you have each item
Keys, features, and locations
Camera
lens
External
display
Phone
Travel Adapter
User’s Guide
Earpiece
Memory
card slot
Main display
Battery
Navigation keys
(Up/Down/
Web access/
Confirm key
Right soft key
You can obtain various
accessories from your local
Samsung dealer.
Left/Right)
Left soft key
Power on/off/
Menu exit key
Dial key
The items supplied with
your phone and the
accessories available at
your Samsung dealer may
vary, depending on your
country or service
Delete key
Volume keys
Alphanumeric
keys
Headset/
Adapter jack
Microphone
Special
function keys
provider.
6
Get started
First steps to operating your phone
Install the battery.
Reattach the
battery cover.
SIM card information
When you subscribe to a cellular network,
you receive a plug-in SIM (Subscriber
Identity Module) card loaded with your
subscription details, such as your PIN, and
available optional services.
Plug the travel adapter into the phone.
Install and charge the phone
Remove the
battery cover.
Insert the SIM
card.
Plug the adapter into a standard AC wall
outlet.
If the phone is
already on, first
turn it off by
Make sure that the
gold-coloured
contacts on the
card are face down.
pressing and
holding [
].
7
Get started
Power on or off
When the phone is completely charged
(the battery icon becomes still), unplug
the adapter from the power outlet.
Switch on
1. Open the phone.
2. Press and hold [ ].
Remove the adapter from the phone.
3. If necessary, enter the
Do not turn
on the phone
when mobile
phone use is
prohibited.
PIN and press <OK>.
Switch off
1. Open the phone.
Low battery indicator
When the battery is low:
•
•
•
a warning tone sounds,
2. Press and hold [ ].
the low battery message displays, and
the empty battery icon
blinks.
If the battery level becomes too low, the
phone automatically turns off. Recharge
your battery.
8
Offline mode
Keys and display
You can switch the phone to Offline mode, in
which the phone functions requiring network
connection are deactivated. This mode is
helpful when you want to use your phone in
a place where you are not allowed to use
mobile devices, such as in an airplane and at
a hospital.
Keys
Perform the function indicated
on the bottom line of the
display.
In Idle mode, access your
favourite menus directly.
To switch to Offline mode, press <Menu
and select Settings Phone settings
Offline mode On
>
→
ꢀp. 85
→
.
In Menu mode, scroll through
menu options.
→
In Offline mode, you can use non-wireless
functions, such as games, calendar, camera,
and music player.
In Idle mode, launch the web
browser.
In Menu mode, select the
highlighted menu option or
confirm input.
Make or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or
received.
9
Get started
Delete characters from the
display, or items in an
application.
Enter special characters.
In Idle mode, press and hold
[
] to activate or deactivate
Silent mode. Press and hold
[ ] to enter a pause between
numbers.
Press and hold to switch the
phone on or off.
End a call.
In Menu mode, cancel input and
return the phone to Idle mode.
Adjust the phone volume.
In Idle mode, with the phone
open, adjust the key tone
volume. With the phone closed,
press and hold to turn on the
external display.
Enter numbers, letters, and
some special characters.
In Idle mode, press and hold
[1] to access your voicemail
server. Press and hold [0] to
enter an international call
prefix.
10
Display
Layout
Transferring data in EDGE
network
Call in progress
Icons
display various
icons.
Out of your service area;
you cannot make or
receive calls
Text and graphics
display messages,
instructions, and
information you
enter.
Connected to Internet
Connected to a secured
web page
Soft key function
indicators
show the current
functions assigned
to the soft keys.
Menu
Contacts
Synchronised with PC
Call diverting feature
active
ꢀp. 89
Icons1
Received signal strength
GPRS network
Home Zone, if registered
for the appropriate service
Connecting to GPRS
network
Office Zone, if registered
for the appropriate service
Transferring data in GPRS
network
Roaming network
SMS message
MMS message
E-mail
EDGE network
Connecting to EDGE
network
Voicemail
11
Get started
Access menu functions
Bluetooth hands-free car
kit or headset connected
Use the
soft keys
The roles of the soft keys vary
ꢀp. 92
depending on the function
you are using. The bottom
line of the display indicates
their current role.
Bluetooth activeꢀp. 92
Music playback in progress
Music playback paused
Memory card inserted
Select
Back
ꢀ
Alarm set
p. 26
ꢀ
Silent mode (Vibration)
Silent mode (Mute)
p. 47
Call ringer set to vibrate
Mute mode, during a call
Battery power level
1. Depending on your country or service
provider, the icons shown on the display
may vary.
Press the left
Press the right
soft key to select soft key to return
the highlighted
option.
to the previous
menu level.
12
Customise your phone
Select an
option
1. Press a desired soft key.
2. Press the Navigation
keys to move to the next
or previous option.
1. In Idle mode, press
Menu> and select
Display
language
<
Settings
settings
→
→
Phone
Language
.
3. Press <Select> or [ ]
to confirm the function
displayed or option
highlighted.
2. Select a language.
1. In Idle mode, press
Call ringer
melody
<
Menu> and select
4. To exit, choose either of
the following methods.
Settings
settings
→
Sound
→
Incoming
call
→
Ringtone.
•
Press <Back> to
move up one level.
Press [ ] to return
to Idle mode.
2. Select a ringtone
category.
•
3. Select a ringtone.
4. Press <Save>.
Use
Press the number key
corresponding to the option
you want. For the menu
numbers 10, 11, and 12,
shortcuts
press [0], [ ] and [
]
respectively.
13
Get started
You can set wallpaper for the
idle screen on the main
display.
You can set the Navigation
keys to function as shortcuts
to access your favourite
menus.
Idle mode
wallpaper
Menu
shortcuts
1. In Idle mode, press
<
Menu> and select
1. In Idle mode, press
Settings
settings
Main display
→
Display
<Menu> and select
→
Wallpaper
→
Settings
settings
→
→
Phone
Shortcuts.
.
2. Select an image or a
video category.
2. Select a key.
3. Select a menu to be
assigned to the key.
3. Select an image or a
video clip.
4. Press <Select>.
5. Press <Save>.
You can change the colour for
the display components, such
as title bars and highlight
bars.
Menu mode
skin colour
1. In Idle mode, press
<
Menu> and select
Settings
settings
→
Display
Skin
→
.
2. Select a colour pattern.
14
You can set up a menu of
your own favourite menu
items.
You can protect the phone
against unauthorised use with
a phone password. The phone
will require the password on
power-up.
My Menu
Phone lock
To set a My menu item:
1. In Idle mode, press
1. In Idle mode, press
<
Menu> and select
<
Menu> and select
Settings Security
Settings
settings
→
Phone
→
→
→
My menu
.
Change password
.
2. Select an item to be
changed.
2. Enter the default
password, 00000000
,
3. Select the menu item you
want.
and press <OK>.
3. Enter a new 4- to 8-digit
password and press
To access a My menu item:
1. In Idle mode, press [Up].
2. Scroll to an item.
3. Press [ ].
<OK>.
4. Enter the new password
again and press <OK>.
5. Select Phone lock
.
You can switch the phone to
Silent mode to avoid
disturbing other people.
6. Select Enable
.
Silent
mode
7. Enter the password and
press <OK>.
Press and hold [ ] in Idle
mode.
15
Make/Answer calls
Step outside the phone
Begin with your camera, the music player, the
web, and other special features
1. In Idle mode, enter an
Make a call
area code and phone
number.
Use the camera
2. Press [ ].
3. To end the call, press
1. Open the phone.
Take a
photo
[
].
2. In Idle mode, press
Menu> and select
Camera
<
1. When the phone rings,
press [ ].
.
Answer
a call
3. Aim the lens at the
subject and make any
desired adjustments.
2. To end the call, press
[
].
4. Press [ ] to take a photo.
The photo is saved
automatically.
Press [ / ].
Adjust the
volume
during
5. Press <Preview> to take
a call
another photo.
16
1. In Idle mode, press
Menu> and select My
files Images My
photos
1. In Idle mode, press
Menu> and select My
files Videos My
video clips
View a
photo
Play a
video
<
<
→
→
→
→
.
.
2. Select the photo you
want.
2. Select the video you
want.
Play music
1. In Idle mode, press
Record a
video
<
Menu> and select
Camera
.
Use these methods:
Copy music
files to the
phone
2. Press [1] to switch to
•
Download from the
wireless web p. 50
Record mode.
ꢀ
3. Press [ ] to start
recording.
•
Download from a
computer using the
optional Samsung PC
4. Press [ ] or <
> to
StudioꢀSamsung PC
stop recording. The video
is saved automatically.
Studio User’s Guide
•
•
Receive via
5. Press <Preview> to
Bluetoothꢀp. 91
record another video.
Copy to a memory card
and insert the card into
the phoneꢀp. 25
17
Step outside the phone
1. In Idle mode, press
Menu> and select
Applications Music
player
1. From the music player
screen, press [ ].
Create a
play list
Play music
files
<
→
2. During playback, use the
following keys:
.
2. Press <Options> and
•
: pauses or resumes
playback.
select Add music from
→
Phone or Memory
•
Left: returns to the
previous file. Moves
backward in a file
when held down.
Right: skips to the
next file. Skips
forward in a file when
held down.
card
.
3. Press [ ] to select the
files you want and press
<Select>.
•
4. Press <Back> to return
to the music player
screen.
•
•
•
Up: opens the play
list.
/ : adjusts the
volume.
Down: stops
playback.
18
Browse the web
Use Phonebook
Using a built-in web browser, you can easily
access the wireless web to get a variety of
up-to-date services and information and to
download web content.
To the phone’s memory:
Add a
contact
1. In Idle mode, enter a
phone number and press
<
Options>.
2. Select Save contact
Phone New
In Idle mode, press [ ].
→
Launch
the web
browser
→
→
a
number type.
3. Specify contact
information: First name,
Last name, Mobile, Home,
Office, Fax, Other, Email,
Caller ID, Ringtone,
•
To scroll through browser
items, press [Up] or
[Down].
Navigate
the web
•
•
•
To select an item, press
[ ].
Group, and Note.
4. Press <Save> to save
To return to the previous
page, press <Back>.
the contact.
To move to the next page,
press <Options> and
select Go
→
Forward.
•
To access browser
options, press
<Options>.
19
Step outside the phone
To the SIM card:
1. In Idle mode, press
Menu> and select
Phonebook My
namecard
Add a
contact
Create and
send a
name card
<
1. In Idle mode, enter a
phone number and press
→
.
<
Options>.
2. Select Save contact
SIM New
3. Enter a name.
2. Specify your contact
information.
→
→
.
3. Press <Save> to save
the name card.
4. Press <Save> to save the
4. To send the name card,
contact.
press <Options> and
select Send via
sending method.
→
a
1. In Idle mode, press
Find a
contact
<Contacts>.
2. Enter the first few letters
of the name you want.
3. Select a contact.
4. Scroll to a number and
press
[
]
to dial, or
press [ ] to edit contact
information.
20
Send messages
3. Enter the message
subject and press [ ].
1. In Idle mode, press
Menu> and select
Messages Create
Text
Send a text
message
(SMS)
<
4. Select Image and video
→
→
or Sound
.
message
message
5. For Image and video
,
.
select Add image or Add
video and add an image
or a video clip.
2. Enter the message text.
3. Press <Options> and
For Sound, select Add
sound and add a sound
clip.
select Save and send or
Send only
.
4. Enter destination
numbers.
6. Select Message
.
5. Press [ ] to send the
message.
7. Enter the message text
and press [ ].
8. Press <Options> and
1. In Idle mode, press
select Send
.
Send a
<
Menu> and select
Messages Create
Multimedia
multimedia
message
(MMS)
9. Enter destination
→
→
numbers or addresses.
message
message
10.Press [ ] to send the
message.
.
2. Select Subject
.
21
Step outside the phone
View messages
1. In Idle mode, press
Menu> and select
Messages Create
message Email
2. Select Subject
Send an
e-mail
<
When a notification appears:
View a text
message
→
→
1. Press <View>.
.
2. Select the message from
the Inbox.
.
3. Enter the e-mail subject
and press [ ].
From the Inbox:
1. In Idle mode, press
4. Select Message
.
<
Menu> and select
5. Enter the e-mail text and
press [ ].
Messages
messages
→
My
→
Inbox
.
6. Select File attached
.
2. Select an SMS message
).
7. Add image, video, sound,
music files, or document
files.
(
When a notification appears:
1. Press <View>.
View a
multimedia
message
8. Press <Options> and
select Send
.
2. Press <Options> and
9. Enter e-mail addresses.
select Retrieve
.
10.Press [ ] to send the
e-mail.
3. Select the message from
the Inbox.
22
Use Bluetooth
From the Inbox:
Your phone is equipped with Bluetooth
technology, enabling you to connect the
phone wirelessly to other Bluetooth devices
and exchange data with them, talk hands-
free, or control the phone remotely.
1. In Idle mode, press
<
Menu> and select
Messages
messages
→
My
→
Inbox
.
2. Select an MMS message
).
(
1. In Idle mode, press
Menu> and select
Settings Bluetooth
Activation On
2. Select My phone’s
visibility On to allow
Turn on
Bluetooth
<
1. In Idle mode, press
Menu> and select
→
→
View an
e-mail
<
→
.
Messages
messages
→
→
My
Email
→
inbox
.
other devices to find your
phone.
2. Select an account.
3. Press <Yes> to download
new e-mails or headers.
4. Select an e-mail or a
header.
5. If you selected a header,
press <Options> and
select Retrieve to
retrieve the body of the
e-mail.
23
Step outside the phone
1. In Idle mode, press
Menu> and select
Settings Bluetooth
My devices Search
4. Select a device.
Search for
and pair
with a
Bluetooth
device
<
5. For Phonebook, select
which data you want to
send.
→
→
→
for new devices
.
6. If necessary, enter the
Bluetooth PIN and press
2. Select a device.
3. Enter a Bluetooth PIN or
the other device’s
<OK>.
Bluetooth PIN, if it has
one, and press <OK>.
To receive data via
Bluetooth, your phone’s
Bluetooth feature must be
active.
Receive
data
When the owner of the
other device enters the
same code, pairing is
complete.
1. When a device attempts
to access your phone,
press <Yes> to permit
the connection.
1. Access an application,
Send data
Phonebook
Memo, or Calendar
,
My files,
2. If necessary, press
.
<Yes> to confirm that
you are willing to receive.
2. Select an item.
3. Press <Options> and
select Send via
Bluetooth
→
.
24
Use a memory card
You can use an optional microSD memory
card to increase your phone’s memory
capacity.
•
Do not touch card
terminals with your
fingers or metal objects. If
dirty, wipe the card with a
soft cloth.
• Frequent erasing and
Important
memory
card
information
• Keep cards away from
small children or pets.
• Do not expose cards in a
place subject to electro-
static discharge and/or
electrical noise.
writing will shorten a
card’s lifespan.
• Do not remove a card
from the phone or turn off
the phone while data is
being accessed or
transferred. This could
result in loss of data and/
or damage to the card or
phone.
• Do not subject cards to
strong shocks.
25
Step outside the phone
1. Slide the card into the
Using a card adapter and a
USB card reader/writer, you
can read the card on a PC.
Insert a
memory
card
Use a card
adapter
card slot, with the label
side face down.
1. Insert a memory card into
a card adapter, and then
the adapter into a card
reader/writer.
2. Press the card until it
locks into place.
2. Plug the USB connector of
the card reader/writer
into the USB port on your
PC.
Some memory cards may
not fit in the memory
card slot.
3. Access the appropriate
memory disk and copy to
and from the card.
1. Press the card so that it
is disengaged from the
phone.
Removethe
memory
card
2. Slide the card out of the
slot.
26
Watch the phone display on a
TV
You can view the display of your phone on a
TV screen by connecting the phone and TV
with a TV out cable. This enables you to
enjoy the photos, videos and music stored in
the phone’s memory with your family or
friends on a larger screen.
1. With the TV switched on,
connect your phone to the
TV with a TV out cable, as
shown.
Transfer
phone
display to
a TV
•
Depending on your
Important
TV
information
particular TV model, the
location and shape of the
video input and audio
output ports may vary.
Match cable connector and
TV port colours.
2. Switch the TV to External
Input mode.
The display switches to
TV Out mode and you can
view the phone’s display
on the TV screen.
•
Depending on the video
system, the image may
vibrate or in some other
way be less than optimal.
3. If necessary, set the
video system for your TV
in the TV-out settings
•
•
Depending on the video
quality, some video clips
may not display.
menu.ꢀp. 87
4. Access the application
you want and open files.
You cannot use a
Bluetooth stereo headset
or the zooming feature in
TV Out mode.
27
Using AB mode
Press the appropriate key until the character
you want appears on the display.
Enter text
AB, T9, Number, and Symbol modes
You can enter text for some features, such
as Messages, Phonebook, or Calendar, using
AB mode, T9 mode, Number mode, and
Symbol mode.
Characters in order displayed
Key
Upper case
Lower case
Changing the text input mode
•
Press and hold [ ] to switch between T9
mode ( ) and AB mode ( ).
Depending on your country, you may
also be able to access an input mode for
your specific language.
(Creating an SMS message with GSM-Alphabet
encoding)
•
•
Press [ ] to change case or switch to
Number mode (
).
Other AB mode operations
Press and hold [ ] to switch to Symbol
mode.
•
To enter the same letter twice or to enter
a different letter on the same key, wait
for the cursor to move to the right
automatically or press [Right]. Then,
enter the next letter.
•
•
Press [ ] to insert a space.
Press the Navigation keys to move the
cursor.
28
•
Press [
one. Press and hold [
C
] to delete characters one by
4. Press [ ] to insert a space and enter the
next word.
C] to clear the
display.
Other T9 mode operations
•
Press [1] to enter periods or apostrophes
automatically.
Using T9 mode
T9 is a predictive text input mode that
allows you to key in any character using
single keystrokes.
•
•
Press [ ] to insert a space.
Press the Navigation keys to move the
cursor.
Entering a word in T9 mode
•
Press [C] to delete characters one by
1. Press [
Press each key once for each letter.
For example, press [ ], [ ], [ ], [
and [ ] to enter Hello in T9 mode.
2] to [9] to start entering a word.
one. Press and hold [C] to clear the
display.
4
3
5
5],
Adding a new word to the T9
dictionary
6
T9 predicts the word that you are typing,
and it may change with each key that
you press.
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Enter the whole word before editing or
deleting characters.
2. Press [0] to display alternative words for
your key presses. When there are no
more alternative words, Add appears on
the bottom line.
3. When the word displays correctly, go to
step 4. Otherwise, press [0] to display
alternative word choices for the keys
that you have pressed.
3. Press <Add>.
4. Enter the word you want using AB mode
For example, Of and Me use [6] and [3].
and press <OK>.
29
Using Number mode
Number mode enables you to enter
numbers.
Call functions
Advanced calling features
Press the keys corresponding to the digits
you want.
Making a call
1. In Idle mode, enter the area code and
phone number.
Using Symbol mode
Symbol mode enables you to insert symbols.
• Press [C] to clear the last digit or
press and hold [
display.
• Press and hold [ ] to enter a pause
between numbers.
C] to clear the whole
To
Press
scroll to a symbol set the Navigation
keys.
2. Press [ ].
3. When you want to end the call, press
].
select a symbol
the corresponding
number key.
[
clear the entered
symbols
[C].
Making an international call
1. In Idle mode, press and hold [
0]. The
+
character appears.
insert the symbols
<OK>.
2. Enter the country code, area code, and
phone number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the
list of recent numbers.
30
2. Scroll to the number you want and press
].
Answering a call
When you receive an incoming call, the
phone rings and displays the incoming call
image.
[
Making a call from Phonebook
Once you have stored a number in
Phonebook, you can dial the number by
Press <Accept> or [ ] to answer the call.
selecting it from Phonebook.ꢀp. 36
Tips for answering a call
You can also use the speed dial feature to
assign your most frequently dialled numbers
•
When Anykey answer is active, you can
press any key, except for <Reject> and
to specific number keys.ꢀp. 38
[
].
When Active flip is active, you can
simply open the phone. p. 86
ꢀp. 86
You can quickly dial a number from the SIM
card using its location number assigned
when stored.
•
ꢀ
•
•
Press <Reject> or [ ] to reject a call.
1. In Idle mode, enter a location number
and press [ ].
Press and hold [ / ] to reject a call or
mute the ringer, depending on the
Volume key setting.
2. Press [Left] or [Right] to scroll through
other numbers.
ꢀp. 86
3. Press <Dial> or [ ] to dial the number
you want.
Viewing missed calls
If you have missed calls, the screen displays
how many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed
calls.
3. Press [ ] to dial the number you want.
31
Call functions
Placing a call on hold/Retrieving
Press <Hold> to place a call on hold, or
press <Retrieve> to retrieve the call.
Using the headset
Use the headset to make or answer calls
without holding the phone.
Connect the headset to the jack on the left
side of the phone. The button on the
headset works as follows:
Making a second call
You can make another call if your network
supports this function.
To
Press
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
redial the last call
answer a call
end a call
the button twice.
the button.
the button.
3. Press <Swap> to switch between the
calls.
4. Press <Options> and select End held
call to end the call on hold.
5. To end the current call, press [ ].
Options during a call
You can access a number of functions during
a call.
Answering a second call
You can answer an incoming call while
already on the phone, if your network
supports this function and you have
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume
during a call.
activated the call waiting feature.
ꢀp. 90
1. Press [ ] to answer the call. The first
call is automatically put on hold.
Press [ ] to increase the volume level and
[ ] to decrease the volume level.
2. Press <Swap> to switch between the
calls.
32
3. Press <Options> and select End held
•
•
call to end the call on hold.
phone's microphone so that the other
person on the phone cannot hear you, or
switch it back on.
4. To end the current call, press [ ].
Using the speakerphone feature
Mute keys/Send keys: switch the key
tones off or on.
Use your phone as a speakerphone to talk
and listen with the phone a short distance
away.
To communicate with answering
machines or computerised telephone
systems, Send keys must be selected.
Press [ ] and then <Yes> to activate the
speakerphone feature. Press [ ] again to
switch back to the earpiece.
•
Send DTMF: send the DTMF (Dual tone
multi-frequency) tones as a group. The
DTMF tones are the tones used in phones
for tone dialling, sounding when you
press the number keys. This option is
helpful for entering a password or an
account number when you call an
automated system, like a banking
service.
Using In-call options
Press <Options> to access the following
options during a call:
•
•
Speaker on/Normal: turn on the
speakerphone feature or switch back to
Normal mode.
•
•
Phonebook: access the contact list.
Switch to headset/Switch to phone:
transfer the call to a Bluetooth headset
or hands-free car kit, or back to the
SIM service: access special services,
such as news, weather forecasts,
entertainment, and location services,
provided by your SIM card. This option is
available when you use a SIM card
supporting SIM Application Toolkit
menus.
phone.ꢀp. 92
•
Menu: access the phone's menu
functions.
33
•
•
Join: set up a multi-party call by adding
a caller on hold to a currently active call.
You can include up to 5 people on a
multi-party call.
Menu functions
All menu options listed
Private: have a private conversation
with one multi-party call participant. The
other participants can converse with
each other. After the private
conversation, select Join to return both
private participants to the multi-party
call.
Call log (Menu 1)
Use this menu to view the calls you have
dialled, received, or missed, and the length
of the calls. You can also check the cost of
your calls, if your SIM card supports this
function.
•
Removed: disconnect one multi-party
call participant.
To access this menu, press <Menu> in Idle
mode and select Call log
.
Recent contacts (Menu 1.1)
This menu displays the most recent calls
dialled, received, or missed.
Accessing a call log
1. Press [Left] or [Right] to move to
another call type.
2. Press [Up] or [Down] to scroll through
the call list.
3. Press [ ] to view the details of a call, or
press [ ] to dial a number.
34
Using call log options
Delete all (Menu 1.5)
While viewing call details, press <Options
to access the following options:
>
Use this menu to delete all of the records in
each call type.
•
•
Call: edit the number and dial it.
1. Press [ ] to select the call types to be
cleared.
Add to Phonebook: save the number to
Phonebook.
2. Press <Delete>.
•
•
Send: send an SMS or MMS message to
the selected number.
3. Press <Yes> to confirm the deletion.
Call time (Menu 1.6)
Delete: delete the selected call log or all
logs.
This menu displays the time log for calls
made and received. The actual time invoiced
by your service provider will vary.
Missed calls (Menu 1.2)
This menu displays the most recent calls you
did not answer.
•
•
•
Last call time: check the length of your
last call.
Total dialled calls: check the total
length of all the calls you have dialled.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you
have dialled.
Total received calls: check the total
length of all the calls you have received.
To reset the call timers, press <Reset>. You
need to enter the phone password.
Received calls (Menu 1.4)
This menu displays the most recent calls you
have received.
The password is preset to 00000000. You
can change this password.ꢀp. 94
35
Menu functions
Call costs (Menu 1.7)
Phonebook (Menu 2)
This network feature displays the cost of
calls. This menu is available only if
supported by your SIM card. Note that this is
not intended to be used for billing purposes.
You can store phone numbers on your SIM
card and in your phone’s memory. The SIM
card and phone’s memory are physically
separate, but they are used as a single
entity called Phonebook.
•
Last call cost: check the cost of your
last call.
To access this menu, press <Menu> in Idle
•
Total cost: check the total cost of all of
your calls. If the total cost exceeds the
maximum cost set in Set max. cost
mode and select Phonebook
.
Contact list (Menu 2.1)
,
you must reset the counter before you
can make another call.
Use this menu to search for contacts in
Phonebook.
•
•
•
•
Max. cost: check the maximum cost
limit.
You can quickly access this menu by
pressing <Contacts> in Idle mode.
Reset counters: reset the cost
counters.
Finding a contact
1. Enter the first few letters of the name
that you want to find.
Set max. cost: set the maximum cost
authorised for your calls.
2. Select a contact from the list.
Price/Unit: set the price per unit that is
applied when the cost of your calls is
calculated.
3. Scroll to a number and press [ ] to
dial, or press [ ] to edit contact
information.
36
•
Delete: delete the selected contact.
Finding a contact in Idle mode
You can find contacts in Idle mode, by the
spelling of a contact name. The phone
searches for the contact names starting with
the letters labelled on any of the keys you
pressed.
Create contact (Menu 2.2)
Use this menu to add a new contact to
Phonebook.
Storing a contact in the phone’s
memory
1. In Idle mode, press the number keys
containing the letters you want.
1. Select Phone
.
2. Press <Options> and select Search as
2. Change the settings or enter information
about the contact.
spelling
.
The phone searches Phonebook for the
matching contacts and shows results.
•
First name/Last name: assign a
name.
Using Phonebook options
•
Mobile
add a number in any type.
Email: assign an e-mail address.
Caller ID: assign an image or a
video to alert you to a call from the
person.
Ringtone: assign a ringtone to alert
you to a call from the person.
Group: assign the number to a caller
group.
/Home/Office/Fax/Other:
While viewing contact details, press
•
•
<Options> to access the following options:
•
Edit: edit contact information.
•
Send message: send an SMS or MMS
message to the selected number, or an
MMS message or e-mail to the selected
address.
•
•
•
•
•
Copy to: copy the contact to the phone’s
memory or to the SIM card.
Note: add a memo about the person.
Send via: send the contact via SMS,
MMS, e-mail, or Bluetooth.
3. Press <Save> to save the contact.
37
Menu functions
Storing a contact on the SIM card
Adding members to a caller group
1. Select a group.
1. Select SIM
.
2. Enter information about the contact.
2. Press <Add>.
•
•
•
Name: assign a name.
Phone number: add a number.
Location: assign a location number.
3. Press [ ] to select the contacts to be
added.
4. Press <Select>.
STo assign a caller ID image or video,
ringtone, or group, the contact must be
saved to the phone’s memory.
Managing caller groups
While viewing the group list, press
<Options> to access the following options:
3. Press <Save> to save the contact.
•
View: display the members of the
selected group.
Group (Menu 2.3)
•
•
•
Create group: add a new group.
Use this menu to organise your contacts in
caller groups.
Edit: change the group properties.
Send message: send an SMS, MMS, or
e-mail message to the group members
you want.
Creating a new caller group
1. Press <Options> and select Create
group
.
•
Delete: delete the selected group or all
groups. Group members, however, will
not be deleted from Phonebook.
2. Enter a name for the group.
3. Select the caller ID line and set an image
or a video clip.
Speed dial (Menu 2.4)
4. Select the ringtone line and set a
ringtone.
Use this menu to assign a speed dial number
(2 to 9) for 8 of your most frequently dialled
numbers.
5. Press <Save> to save the group.
38
Assigning speed dial numbers
1. Select a key location from to
Saving your name card
2
9. Key
1
The procedure for creating your name card
is the same as the one for saving a phone
is reserved for your voicemail server.
number in the phone’s memory.ꢀp. 37
2. Select a contact from the contact list.
3. Select a number, if the contact has more
than one number.
Using name card options
After saving your name card, press
<Options> to access the following options:
Managing speed dial entries
•
Edit: edit the name card.
From the Speed dial screen, press
<Options> to access the following options:
•
Send via: send the name card via SMS,
MMS, e-mail, or Bluetooth.
•
Add: assign a number to an unassigned
key.
•
•
Exchange namecard: exchange name
cards with another person via Bluetooth.
•
•
•
View: check the name and number
assigned to a key.
Delete: delete the name card.
Change: assign a different number to a
key.
Own number (Menu 2.6)
Use this feature to check your phone
numbers, or to assign a name to each of the
numbers. Changes made here do not affect
the actual subscriber numbers on your SIM
card.
Remove: clear the speed dial setting for
a key.
Dialling speed dial numbers
In Idle mode, press and hold the appropriate
key.
Management (Menu 2.7)
My namecard (Menu 2.5)
Use this menu to manage contacts in
Phonebook.
Use this menu to create a name card and
send it to other people.
39
Menu functions
•
Save new contact to: select a default
memory location for saving contacts. If
you select Always ask, the phone will
ask you to select a memory location each
time you save a number.
Applications (Menu 3)
Use this menu to play music files or play
Java games. You can also use convenient
features, such as voice recorder, alarm
clock, calculator, converter, and stopwatch.
•
•
•
Copy all to: copy all of the contacts
stored on the SIM card to the phone’s
memory, or vice versa.
To access this menu, press <Menu> in Idle
mode and select Applications
.
Delete all: delete all of the contacts
from your phone’s memory, your SIM
card, or both.
Music player (Menu 3.1)
Use this menu to enjoy music. First, you
need to save music files into your phone’s
memory or on a memory card.
Memory status: check the number of
contacts you have stored in the phone’s
memory and on the SIM card.
To enjoy high quality music, you can use an
optional Bluetooth stereo headset.
Service number (Menu 2.8)
Normal headsets and Bluetooth mono
headsets are not compatible with the music
player.
Use this menu to view the list of Service
Dialling Numbers (SDN) assigned by your
service provider, including emergency
numbers and numbers for directory
enquiries. This menu is available if your SIM
card supports SDN.
Downloading or receiving music files
You can play *.mp3, *.aac, *.m4a, and
*.wma files.
Use the following methods to save music
files to your phone’s memory:
1. Scroll to the number you want and press
<View>.
•
Download from the wireless webꢀp. 50
2. Press <Dial> or [ ].
40
•
Download from a computer using the
During playback, use the following keys:
optional Samsung PC StudioꢀSamsung
Key
Function
PC Studio User’s Guide
Pauses or resumes playback.
•
Receive via an active Bluetooth
connection p. 91
Copy to a memory card and insert the
card into the phone p. 25
The downloaded or received files are stored
in the Music folder. p. 72
ꢀ
Left
Returns to the previous file.
Moves backward in a file when
held down, if it is an mp3 file.
•
ꢀ
Right
Skips to the next file. Skips
forward in a file when held
down, if it is an mp3 file.
ꢀ
Creating a play list
1. From the music player screen, press
Options> and select Add music from
Phone or Memory card
Up
Down
1
Opens the play list.
Stops playback.
<
→
.
2. Press [ ] to select the files to be added
Turns 3D sound on or off.
and press <Select>.
2
Changes the playback
animation.
3. Press <Back> to return to the music
player screen.
3
4
6
/
Changes the repeat mode.
Changes the equaliser mode.
Turns Shuffle mode on or off.
Adjusts the volume level.
Playing music files
1. From the music player screen, press
<Options> and select Play via.
2. Select Phone to use the phone speaker.
Select Bluetooth stereo headset to
use a Bluetooth stereo headset and then
search for and connect the phone to the
headset.
41
Menu functions
Equaliser: select an equaliser setting.
Using music player options
3D sound: turn 3D sound on or off.
From the music player screen, press
<
Options> to access the following options:
Play Pause: begin or pause playback.
Transfer to Bluetooth stereo
headset Transfer to phone: switch
the sound output to a Bluetooth stereo
headset or the phone speaker.
Visualisation: change the playback
animation.
•
/
Volume: select a volume level.
•
/
•
•
Details: access the file properties.
Key management: manage the licence
keys you have acquired.
•
•
Open playlist: access the play list of the
current album or album list. On the
album list, you can set up multiple
albums.
Accessing the play list
From the music player screen, press [Up].
Press <Options> to access the following
options:
Activate key: get a licence key when
the key for the selected DRM files
expires.
•
Play via: play the selected file via the
phone speaker or a Bluetooth stereo
headset.
•
•
Remove from playlist: remove the
selected file from the play list.
•
•
•
•
Add music from: add files to the play
list.
Settings: change the default settings for
playing music files.
Repeat mode: select a repeat mode.
Move to: move the selected file to
another album.
Shuffle: set the music player to play
music at random.
Copy to: copy the selected file to
another album.
Music player overrides other sounds
set the music player to continue
playback even if you exit it.
:
Move track in playlist: move the
selected file to the position you want
within the play list.
42
•
•
Activate key: get a licence key when
the key for the selected DRM file expires.
2. Select a voice memo.
During playback, use the following keys:
Remove: remove the selected file or all
files from the play list.
Key
Function
•
•
Details: access the file properties.
Pauses or resumes playback.
Key management: manage the licence
keys you have acquired.
Left
Returns to the previous
memo. Moves backward in a
memo when held down.
Voice recorder (Menu 3.2)
Right
Skips to the next memo.
Skips forward in a memo
when held down.
Use this menu to record voice memos. A
voice memo can be up to one hour long.
Recording a voice memo
/
Adjusts the volume.
Stops playback.
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume recording.
Down
Changing the recording mode
3. Press <Stop> or [Down] to end
recording. The voice memo is
automatically saved.
You can change the recording mode of the
voice recorder. The maximum recording time
is determined by this setting. Before
4. Press [ ] to review the voice memo, or
[Up] to record a new memo.
recording a memo, press <Options> and
select Settings
→
a recording mode:
Playing a voice memo
1. From the Voice recorder screen, press
•
Limit for multimedia message: You
can record a voice memo for adding to
an MMS message.
<
clips
Options> and select Go to My voice
.
43
Menu functions
•
Limit for email: You can record a voice
memo for adding to an e-mail.
3. Press <Done>.
4. Press <Options> and select Save as
.
•
Maximum 1 hour: You can record a
voice memo of up to one hour.
5. Enter a new file name and press <OK>.
Cropping
Image editor (Menu 3.3)
1. Select a photo or take a new photo.
2. Press <Options> and select Crop
.
Use this menu to edit your photos using
various editing tools.
3. Move the cropping frame to the area of
the image you want.
Applying an effect
1. Press <Options> and select New
Press <Options> and select Resize to
change the frame size.
image
→
Open or Take photo.
4. Press <Options> and select Done
.
2. Select a photo or take a new photo.
5. Press <Options> and select Save as
.
3. Press <Options> and select Effects
→
6. Enter a new file name and press <OK>.
an effect option.
4. Press <Done>.
Adding visual features
5. Press <Options> and select Save as
.
You can decorate photos by adding a frame,
an image, or a note.
6. Enter a new file name and press <OK>.
1. Select a photo or take a new photo.
Transforming
1. Select a photo or take a new photo.
2. Press <Options> and select Insert
→
a
feature type.
2. Press <Options> and select Transform
3. Select an item, or enter text to be
→
•
•
an option:
inserted and press <OK>.
Resize: change the photo size.
Rotate: rotate the photo 90 degrees.
Flip: flip the photo.
4. Adjust the position of the inserted item.
•
44
5. Press <Done>, or press <Options> and
select Done
6. Press <Options> and select Save as
6. Press <Options> to access the following
.
stamp edit options:
.
•
•
Resize: change the stamp size.
Move: change the position of the
stamp.
7. Enter a new file name and press <OK>.
Merging a stamp effect
•
•
Rotate: rotate the stamp.
Stamp colour: change the stamp
colour.
This editing tool allows you to make an
outline stamp of a photo and then merge it
with another photo. You can use this tool to
create your own photo postcard by taking a
photo of a handwritten message and
merging it with a photo.
•
Shadow on: apply a shadow to the
stamp.
7. When you have finished, press
Options> and select Done
8. Press <Options> and select Save as
<
.
1. Select a photo or take a new photo.
.
2. Press <Options> and select Merge
9. Enter a new file name and press <OK>.
stamp. The background photo appears
in the image box next to
3. Press <Options> and select Add
image
.
Java world (Menu 3.4)
Use this menu to access the embedded Java
games and downloaded Java applications.
.
4. Add a photo by selecting or taking a
photo. The added photo appears in the
Accessing an embedded game
image box next to
stamp.
. This will be the
1. Select My games
→
a game.
2. If necessary, press [ ].
5. Press <Options> and select Merge. The
stamp photo is added to the background
photo as an outline.
45
Menu functions
•
Settings: select a connection profile to
be used for applications requiring
network access. You can also create or
Using Java application options
From the application list, press <Options
to access the following options:
>
edit a profile.ꢀp. 96
•
•
Start: launch the selected application.
Move to: move the application to
another folder.
World clock (Menu 3.5)
Use this menu to set your local time zone
and find out the current time in another part
of the world.
•
•
Delete: delete the selected application
or all applications, except for the
embedded games.
Viewing world time
Protection: lock the application to
protect it from being deleted, or unlock
the application.
1. From the world map, press [Left] or
[Right] to scroll to the city you want. As
the time line moves, the time and date of
the given zone display.
•
•
Details: access the application
properties.
2. Press [ ] to save the city as your local
time zone.
Permissions: set permission settings
for services charging you additional
costs, such as network access and SMS.
Applying daylight saving time
1. From the world map, press <Options
>
•
•
Upgrade: upgrade the application to the
latest version.
and select Apply daylight saving time
.
2. Press [ ] to select the time zones you
want.
Send information via Text message
:
send the URL containing the application
via SMS.
3. Press <Save>.
•
Memory status: access memory
information for applications.
46
Deactivating an alarm
Alarm (Menu 3.6)
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
3. Press <Save>.
Use this menu to set alarms. The alert type
for a normal alarm corresponds to the call
alert type settings. A wake-up alarm is not
affected by your sound settings.
Setting alarms to sound when the
phone is off
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
From the Alarm screen, select Auto power
→
On.
•
•
Alarm: activate the alarm.
Alarm time: enter the time for the
alarm to ring.
If the phone is off when it is time for the
alarm to sound, the phone switches on and
sounds the alarm.
•
AM/PM: set AM or PM in 12-hour
format.
Calculator (Menu 3.7)
•
•
Repeat: select a repeat option.
Alarm tone: select an alarm tone.
Use this menu to perform basic arithmetic
functions, such as addition, subtraction,
multiplication, and division.
3. Press <Save>.
1. Enter the first number.
Stopping an alarm
•
Press <.()> to insert a decimal point
or bracket.
•
For a non-wake-up alarm, press any key.
•
For a wake-up alarm, press <Confirm
or [ ].
>
•
Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to
access the math function you want.
Press any key, except for <Confirm
>
and [ ], to cause it to sound again after
5 minutes. You can do this a maximum
of 5 times.
3. Enter the second number.
4. Press [ ] to view the result.
47
Menu functions
5. If necessary, repeat from step 2 to
continue the calculation.
Timer (Menu 3.9)
Use this menu to set a period of time for the
phone to count down. The phone sounds an
alarm when the specified period of time
expires.
Converter (Menu 3.8)
Use this menu for common conversions,
such as currency and temperature.
Starting the timer
1. Press <Set>.
1. Select a converter.
2. Press [Left] or [Right] to select the
original unit and press [Down].
2. Enter the length of time you want to
count down and press <OK>.
3. Enter the value to be converted and
press [Down].
3. Press [ ] to start counting down.
Stopping the timer
•
•
Press [ ] to insert a decimal point.
Press [ ] to change the temperature
to above zero (+) or below zero (-).
•
Press any key when the timer rings.
•
Press [ ] on the Timer screen to stop the
timer before it rings.
4. Press [Left] or [Right] to select the unit
to which you want to convert.
Stopwatch (Menu 3.10)
The equivalent value for the amount you
entered displays.
Use this menu to measure elapsed time. The
maximum time is 10 hours.
For the currency converter, you can view
and set currency rates by pressing <View
rate>.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can
repeat this step for a total of 4 intervals.
48
2. Enter the memo text and press [ ].
Key management (Menu 3.11)
Use this menu to manage the licence keys
you have acquired to activate media
contents locked by DRM systems.
Viewing a memo
Select the memo you want to view.
While viewing memo details, press
Press <Options> to access the following
options:
<Options> to access the following options:
•
Edit: change the memo text.
•
•
•
View/Play: open the corresponding
media content.
•
Send via: send the selected memo via
SMS, MMS, e-mail, or Bluetooth.
Delete: delete the selected licence key
or all licence keys.
•
•
Delete: delete the memo.
Memory status: check how many
memos you have created.
Go to My messages: access the
message that contains the media
content.
SIM AT (Menu 3.13)
•
•
Go to my item: access the
This menu is available if you use a SIM AT
card that supports SIM Application Toolkit
menus and provides additional services,
such as news, weather, sports,
corresponding file folder.
Details: access the properties of the
licence key.
entertainment, and location services.
Available services may vary, depending on
your service provider’s plans. For details,
see your SIM card instructions or contact
your service provider.
Memo (Menu 3.12)
Use this menu to make memos of important
things and manage them.
Creating a memo
1. Press <Options> and select Create
.
49
Menu functions
Browser (Menu 4)
To
Press
The Wireless Application Protocol (WAP)
browser on your phone allows you to access
the wireless web. From the wireless web,
you can access up-to-date information and a
wide variety of media content, such as
games, wallpapers, ringtones, and music
files.
return to the
previous page
<
<
Back>, or
Options> and
Back.
select Go
→
move to the next
page
<Options> and
select Go
Forward
→
.
To access this menu, press <Menu> in Idle
Using page options
mode and select Browser
.
From any web page, press <Options> to
access the following options:
Home (Menu 4.1)
•
•
Go to: access the linked web page.
Use this menu to connect your phone to the
network and load the homepage of the
wireless web service provider. You can also
press [ ] in Idle mode.
Go to homepage: return to the
homepage.
•
Keys to buy: send a request for buying
a licence key for a DRM file. This option
will be available only when you access
the web browser from a message
containing a DRM file.
Navigating the web
To
Press
scroll through
browser items
[Up] or [Down].
•
•
Enter URL: enter a URL address
manually.
select a browser
item
[ ], or <Options>
Go: move backward or forward through
pages in history.
and select Go to
.
50
•
•
•
•
Reload: reload the current page with
updated information.
About browser: access version and
copyright information about the browser.
Bookmarks: bookmark the current
page or access the bookmark list.
Exiting the browser
Press [ ] to end the network connection
and close the browser.
Send URL: send the URL of the current
page via SMS.
Enter URL (Menu 4.2)
To SmartFit view/To Desktop view:
change the display mode of the browser.
Use this menu to manually enter a URL
address and access the associated web
page.
•
•
Save: save the selected image or page.
Page details: access the page
properties.
You can add the entered URL to the
•
Browser options: change the various
settings for the browser.
bookmark list by selecting Add bookmark
.
Bookmarks (Menu 4.3)
Cache: change the cache mode or clear
the cache. The cache is a temporary
memory site that stores recently
accessed web pages.
Use this menu to save URL addresses in
order to quickly access web pages.
Adding a bookmark
1. Press <Add>. If a bookmark has already
Cookies: change the cookie acceptance
mode or delete cookies. Cookies are
pieces of personal information sent to a
web server while navigating the web.
been saved, press <Options> and
select Add bookmark
.
2. Enter a title for the bookmark and press
[Down].
Preferences: change the browser
display and sound settings.
3. Enter a URL address and press <Save>.
Certificates: access certificate
information.
51
Menu functions
Accessing a bookmarked page
Saved pages (Menu 4.4)
Selecting a bookmark item launches the web
browser and accesses the associated web
page.
You can access the list of pages you have
saved while online.
If you select a link on the page, the phone
switches to online to access the linked page.
Using bookmark options
From the Bookmarks screen, press
History (Menu 4.5)
<Options> to access the following options:
You can access the list of pages you have
accessed recently.
•
Go to: access the bookmarked web
page.
Select a URL from the list to access the
corresponding web page.
•
•
•
Go to homepage: access the
homepage.
Enter URL: enter a URL address
manually.
Clear cache (Menu 4.6)
Use this menu to clear information stored in
the cache, a temporary memory site that
stores recently accessed web pages.
Edit bookmark: edit the URL address
and title of the bookmark.
•
•
Add bookmark: add a new bookmark.
Send URL: send the URL address of the
bookmark via SMS.
Browser settings (Menu 4.7)
Use this menu to select a connection profile
to be used for accessing the wireless web.
•
Delete: delete the selected bookmark or
all bookmarks.
You can also create or edit a profile.
ꢀp. 96
52
Creating and sending an SMS message
Streaming settings (Menu 4.8)
Use this menu to select a connection profile
to be used for accessing your service
provider’s streaming service. This menu may
not be shown depending on your service
provider. You can also create or edit a
• The maximum number of characters
allowed in a message varies by
service provider. If your message
exceeds the maximum number of
characters, the phone will split the
message.
profile.ꢀp. 96
• You can use various options by
pressing
<Options>.
Messages (Menu 5)
ꢀ
next section
Use the Messages menu to send and
receive text messages, multimedia
messages, and e-mails. You can also access
push messages and cell broadcast
messages.
2. Enter a destination number.
To send the message to more than one
recipient, fill in additional destination
fields.
3. Press [ ] to send the message.
To access this menu, press <Menu> in Idle
Using options while composing an SMS
message
mode and select Messages
.
Create message (Menu 5.1)
While composing a message, press
<Options> to access the following options:
Use this menu to create and send messages.
•
Send only: just send the message.
Text message (Menu 5.1.1)
•
Save and send: send the message and
then save it in the Sent box folder.
Short Message Service (SMS) allows you to
send or receive text messages that may
include simple pictures, animated images,
and melodies.
53
Menu functions
•
Preview as vivid message: view the
message in 3D view mode. The phone
converts message text to 3D vivid
graphics. This option is available only
when the message consists of a single
page.
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers
messages containing a combination of text,
image, video, and audio, from phone to
phone or from phone to e-mail.
Creating and sending an MMS message
1. Select the Subject line.
•
•
Insert: add a template, Phonebook
entry, or bookmark.
You can use various options by pressing
Add image/Add animation/Add
melody: attach a simple image, an
animated image, or a melody.
<
Options
>
in each field.
ꢀ
next section
2. Enter the message subject and press
[ ].
•
Attach: attach a Phonebook entry as a
name card or a calendar data as a data
format attachment.
3. Select the Image and video line.
•
•
Save in: save the message in another
message folder.
4. Select Add image or Add video and
add an image or a video clip.
Input language: change the language
to be used in T9 input mode.
• The maximum size allowed for a
message can differ, depending on
your service provider.
• Depending on the file type or DRM
(Digital Rights Management) system,
some files may not be able to be
forwarded.
•
•
Text style: change the text attributes.
Input method: change the text input
mode.
5. Select the Sound line.
54
6. Select Add sound and add a sound clip.
7. Select the Message line.
•
•
Edit: edit the message subject or text.
Preview: view the message as it will be
shown on the recipient’s phone.
8. Enter the message text and press [ ].
•
•
•
View: open the selected attachment.
9. When you have finished, press
<
Options> and select Send
.
Send: send the message.
10.Enter a phone number or an e-mail
address.
Save in: save the message in another
message folder.
To send the message to more than one
recipient, fill in additional destination
fields.
•
Add page: add pages. Move to each
page by pressing [Left] or [Right].
•
•
Delete page: delete an added page.
11.Press [ ] to send the message.
Edit page: change the duration of page
display or move the page forward among
the other pages.
Using options while composing an MMS
message
•
•
Attach: attach a Phonebook entry as a
name card, a calender data as a data
format attachment, or a document file
stored in the Other files folder.
While composing a message, press
<Options> to access the following options:
•
Add: add the message subject or
message text.
Remove subject
Remove media Remove sound
Remove: remove an added item.
/Remove message/
•
•
•
Add image
add a image, video clip, or sound clip.
Change image Change video Change
sound: replace an added item.
/Add video/Add sound:
/
/
/
/
Email (Menu 5.1.3)
You can create and send e-mails that include
text, audio, and images.
Add memory card: add a file stored on
a memory card, if inserted.
55
Menu functions
Creating and sending an e-mail
1. Select the Subject line.
Using options while composing an
e-mail
While composing an e-mail, press
You can use various options by pressing
<Options> to access the following options:
<
Options> in each field.
ꢀnext section
•
Add: add the subject of your e-mail or
e-mail text.
2. Enter the e-mail subject and press [ ].
3. Select the Message line.
•
•
Edit: edit the subject or text.
Add image/Add video/Add sound/
Add music: add media files stored in
the phone’s memory.
4. Enter the e-mail text and press [ ].
5. Select the File attached line.
6. Add media files or document files stored
•
•
Add other files: add document files
stored in the Other files folder.
in the Other files folder.
Depending on the file type or DRM
(Digital Rights Management) system,
some files may not be able to be
forwarded.
Memory card: add files stored on a
memory card, if inserted.
•
•
•
View/Play: open an attached file.
Send: send the e-mail.
7. When you have finished, press
Save in: save the e-mail in another
message folder.
<
Options> and select Send
.
8. Enter an e-mail address.
•
•
Attach: attach Phonebook entries as
name cards or calender data as data
format attachments.
To send the e-mail to more than one
recipient, fill in additional destination
fields.
Remove subject/Remove message/
Remove attachment: remove an
9. Press [ ] to send the e-mail.
added item.
56
•
Remove all attachments: delete all
attached files.
•
•
CB (Cell broadcast) message from
your service provider
Delivery report for your sent
messages
My messages (Menu 5.2)
Use this menu to access messages you have
received, sent, or which have failed in
sending.
• Depending on the DRM (Digital Rights
Management) system, messages
having web content may not be able
to be forwarded.
Inbox (Menu 5.2.1)
• A icon next to a message means that
!
the message is of high priority. A
grey-coloured message icon indicates
low priority.
This folder stores all of the messages you
have received, except for e-mails.
Viewing a message
Using message options
The following icons may appear on the
message list to show the message type:
While viewing a message, press <Options
>
to access the following options:
•
•
•
SMS
SMS messages
MMS
•
•
•
•
Reply via text message: reply to the
sender via SMS.
MMS notification ( : Being
retrieved,
retrieved)
: Failed to be
Reply via multimedia message to
reply to the sender via MMS.
:
•
•
•
Voicemail
Forward: forward the message to other
people.
Push message from web servers or
Configuration message, containing
network parameters from your
service provider
Zoom view: reduce the font size so that
you can view more text on one screen.
57
Menu functions
•
View as vivid message
/
View as: view
•
•
•
Reply via text message: reply to the
sender via SMS.
the message in 3D view mode or switch
back to normal view mode. This option is
available only when the message
consists of a single page.
Reply via multimedia message to
:
reply to the sender via MMS.
Forward: forward the message to other
people.
•
•
Delete: delete the message.
Move to phone/Move to SIM: move
the message between the SIM card and
the phone’s memory.
•
•
Delete: delete the message.
Cut address: extract URL addresses,
e-mail addresses, or phone numbers
from the message.
•
Cut address: extract URL addresses,
e-mail addresses, or phone numbers
from the message.
•
•
•
Attached items: save media content
from the message to your phone’s
memory.
•
•
Cut media: save media content from
the message to your phone’s memory.
Lock/Unlock: lock the message to
protect it from being deleted, or unlock
the message.
Lock/Unlock: lock the message to
protect it from being deleted, or unlock
the message. You can protect only those
messages stored in the phone’s memory.
Details: access the message properties.
Configuration messages
•
Add to Block list: add the sender’s
number to the block list to reject the
messages from the sender.
•
Install: apply the configuration specified
in the message to your phone.
•
•
Delete: delete the message.
MMS messages
Lock/Unlock: lock the message to
protect it from being deleted, or unlock
the message.
•
Retrieve: retrieve the MMS message
from the MMS server.
58
Push messages
•
Lock/Unlock: lock the report to protect
it from being deleted, or unlock the
report.
•
Go to URL: connect to the URL address
specified in the message.
•
Cut address: extract URLs, e-mail
addresses, or phone numbers from the
message.
Drafts (Menu 5.2.2)
This folder stores messages you have saved
to send at a later time.
•
•
Delete: delete the message.
When you select a message, it opens in Edit
mode so that you can edit and send the
message.
Lock/Unlock: lock the message to
protect it from being deleted, or unlock
the message.
Outbox (Menu 5.2.3)
Broadcast messages
This folder stores messages that the phone
is attempting to send or has failed to send.
•
Save: save the message to the phone’s
memory.
The following icons are available to show the
message status:
•
Cut address: extract URL addresses,
e-mail addresses, or phone numbers
from the message.
•
•
Being sent
Failed to be sent
•
Delete: delete the message.
While viewing a message, press <Options
to access the following options:
>
Delivery reports
•
Cut address: extract URL addresses,
e-mail addresses, or phone numbers
from the report.
•
•
Send again: retry sending the message.
Forward: forward the message to other
people.
•
Delete: delete the report.
•
Zoom view: reduce the font size so that
you can view more text on one screen.
59
Menu functions
•
Cut address: extract URLs, e-mail
addresses, or phone numbers from the
message.
•
•
•
Move to phone/Move to SIM: move
the message between the SIM card and
the phone’s memory.
•
•
Delete: delete the message.
Lock/Unlock: lock the message to
protect it from being deleted, or unlock
the message.
Move to phone/Move to SIM: move
the message between the SIM card and
the phone’s memory.
Details: access the message properties.
•
•
Lock/Unlock: lock the message to
protect it from being deleted, or unlock
the message.
Email inbox (Menu 5.2.5)
This folder stores e-mails that you have
received.
Details: access the message properties.
Viewing an e-mail
Sentbox (Menu 5.2.4)
1. Select an e-mail account.
This folder stores messages that you have
sent.
2. Press <Yes> when Check for new
email displays. The phone checks the
e-mail server and downloads new
e-mails.
While viewing a message, press <Options
to access the following options:
>
•
•
•
Forward: forward the message to other
people.
The following icons may appear on the
list to show the e-mail status:
Zoom view: reduce the font size so that
you can view more text on one screen.
•
•
•
Retrieved from the server
Being retrieved
Failed to be retrieved
Cut address: extract URLs, e-mail
addresses, or phone numbers from the
message.
A
!
icon next to a message means that
the message is of high priority. A grey-
coloured message icon indicates low
priority.
•
Delete: delete the message.
60
3. Select an e-mail or a header.
•
•
Add to filtering list: add the sender’s
e-mail address or subject to the Block list
to reject e-mails from that address or
containing that subject.
4. Press [Left] or [Right] to view other
pages in the e-mail.
5. Press [ ] or [ ] to view the previous or
next e-mail.
Cut address: extract URLs, e-mail
addresses, or phone numbers from the
e-mail.
Using e-mail options
While viewing the e-mail or header, press
•
•
Attached items: save the attached files
from the e-mail to your phone’s memory.
<Options> to access the following options:
•
Retrieve: retrieve the body of the
e-mail from the e-mail server.
Lock/Unlock: lock the e-mail to protect
it from being deleted, or unlock the
e-mail.
•
•
•
•
View/Play: open the selected
attachment.
•
Details: access the e-mail properties.
Save to my files: save the selected
attachment to the phone’s memory.
My folders (Menu 5.2.6)
Use this menu to create new folders and
organise your messages.
Reply to sender: send a reply to the
sender.
Creating a folder
Reply to all: send a reply to the sender,
or to the sender and all of the other
recipients.
1. Press <Yes>.
2. Enter a folder name and press <OK>.
Using folder options
•
•
Forward: forward the e-mail to other
people.
On the folder list, press <Options> to
access the following options:
Delete: delete the e-mail.
•
•
Open: open the selected folder.
Create folder: add a new folder.
61
Menu functions
•
Rename folder: change the folder
name.
Multimedia message templates
(Menu 5.3.2)
•
Delete: delete the selected folder.
You can access embedded MMS templates or
ones you have saved so that you can use
them when composing an MMS message.
Templates (Menu 5.3)
Use this menu to make and use templates of
frequently used messages or passages.
From the template list, press <Options> to
access the following options:
•
•
View: open the selected template.
Text message templates (Menu 5.3.1)
Edit: create and send a new message
using the selected template.
You can create SMS templates with the
sentences you use frequently so that you
can retrieve and insert them when
composing an SMS message.
•
•
Send message: send the selected
template.
Delete: delete the selected template or
all templates, except for the embedded
ones.
Creating a template
1. Select an empty location.
2. Enter a message and press <OK>.
Using template options
Delete all (Menu 5.4)
From the template list, press <Options> to
access the following options:
Use this menu to delete messages in each
message folder all at once.
•
•
Edit: edit the selected template.
1. Press [ ] to select the message folders
to be cleared.
Send message: create and send a new
message using the selected template.
Pressing the key twice displays the
message types so that you can specify
the ones to be cleared.
•
•
Delete: delete the selected template.
Add new: add a new template.
62
2. Press <Delete>.
Use of Unicode encoding will reduce the
maximum number of characters in a
message to about half. If this menu is
not shown, your phone provides
3. Press [ ] to select the check box to
delete protected messages, and then
press <Yes>.
automatic character encoding by default.
4. Press <Yes> to confirm the deletion.
Bearer selection: select either GSM or
GPRS preferred, depending on your
network.
Settings (Menu 5.5)
Use this menu to set up various options for
using the messaging service.
•
Receiving options: activate 3D view
mode for displaying received messages.
The phone will convert message text to
3D vivid graphics. This option is available
only when the message consists of a
single page.
Text messages (Menu 5.5.1)
You can configure SMS settings.
•
Sending options: set up the options for
sending SMS messages:
•
•
•
Block list: store the phone numbers
from which you want to reject messages.
Reply path: allow recipients to reply to
you through your SMS server.
Current profile: check or select an SMS
setting profile.
Delivery report: set the network to
inform you when your messages have
been delivered.
Profile settings: set the properties of
each profile.
Character support: select a character
encoding type. When you select
Service centre: store or change the
number of your SMS server.
Automatic, the phone switches the
encoding type from GSM-Alphabet to
UniCode if you enter a Unicode character.
Default destination: enter the default
destination. It will be automatically
entered on the recipient list.
63
Menu functions
Default type: set the default message
type. The network can convert the
messages into the selected format.
Outgoing message size: select a
maximum size allowed for composing
messages.
Default validity: set the length of time
your messages are stored in the SMS
server.
•
Retrieving options: set up the options
for receiving MMS messages:
Reject unknown senders: reject
Setting name: enter a profile name.
messages from unknown senders.
Allow adverts: accept advertisements.
Multimedia messages (Menu 5.5.2)
Allow information: accept information
messages.
You can configure MMS settings.
•
Sending options: set up the options for
sending MMS messages:
Allow report: set the network to inform
the sender when a message has been
delivered to you.
Delivery report: set the network to
inform you when your messages have
been delivered.
Recep. in home network: determine if
your phone retrieves new messages
automatically when you are in your
home service area.
Hide address: set your address to be
hidden from the recipient’s phone.
Read reply: send a read-reply request
along with your messages.
Reception when abroad: determine if
your phone retrieves new messages
automatically when you are roaming on
another network.
Priority: set the priority level of
messages.
Expiry date: set the length of time
messages are stored in the MMS server.
Reception within home network or
abroad has the following options:
Delivery time: set a time delay before
messages are sent.
64
-
Manual: the phone displays
notifications. Use the Retrieve option
to manually download new messages.
Send delivery receipt: set the network
to inform you when your e-mails have
been delivered.
-
-
Automatic: the phone automatically
retrieves messages from the server.
Send read receipt: send a read-reply
request along with e-mails.
Reject: the phone rejects all
messages.
Reply-To address: set an e-mail
address to receive read-reply messages
from recipients.
•
•
Block list: store phone numbers and
e-mail addresses from which you want to
reject messages.
Priority: select the priority level of
e-mails.
Multimedia message profiles: select a
connection profile to be used for MMS.
You can also create or edit a profile.
Attach your vCard: allow your contact
information to be attached to e-mails.
You must first create your name
ꢀp. 96
card.ꢀp. 39
Add signature: attach your name,
phone number, a simple memo, or a tag
line to your e-mails.
Emails (Menu 5.5.3)
You can configure e-mail settings.
You cannot change e-mail profile and
account settings while an e-mail is being
sent or retrieved.
Edit name: edit the name in your
signature.
Edit number: edit the phone number in
your signature.
•
Sending options: set up the options for
sending e-mails:
Edit note: edit the tag line in your
signature.
Keep a copy: leave the copies of your
e-mails in the Sentbox folder after
sending.
65
Menu functions
•
Receiving options: set up the options
for receiving e-mails:
•
•
Block list: specify e-mail addresses or
subjects you want to reject.
Check interval: determine how often
the phone checks the server for incoming
e-mails. If you select Do not notify, use
the Check for new email option to
receive new e-mails manually.
Email accounts: set up an e-mail
account and select an account to be
used.
Current account: check or select an
account.
Send read receipt: determine whether
or not the phone sends a read-reply for
incoming e-mails. If you select Reply
reminder, the phone asks you to send a
read-reply.
Account settings: configure e-mail
accounts using different e-mail servers.
Set the options for each account:
-
Account name: enter a name for the
currently selected account.
Download limit: determine the
maximum size for incoming e-mails. Your
phone will reject e-mails that exceed the
specified size.
-
-
User name: enter a user name.
Email address: enter your e-mail
address.
-
-
SMTP server: enter the IP address or
host name of the outgoing e-mail
server.
Download method: set whether the
phone downloads e-mail headers only or
e-mail headers and bodies both.
SMTP port: enter the SMTP port
number.
Keep in server: leave copies of e-mails
on the e-mail server after retrieving.
Download email latest first: set the
phone to download the most recent
e-mails first.
66
-
-
Connect to POP3 server first
Connect to IMAP4 server first
connect to the POP3 or IMAP4 server
before connecting to the SMTP server
to send e-mails.
/
-
-
-
-
SMTP user ID: enter the SMTP user
name.
:
SMTP password: enter the SMTP
password.
APOP login: connect to the server by
using the APOP login scheme.
Protocol type: select the protocol for
the incoming e-mail server. The
remaining options depend on the
protocol type setting.
Email retrieval limit(1-100): set the
number of headers you will retrieve
from the server.
When the protocol type is POP3
:
-
Secure connection: use a secure
connection for the e-mail service.
-
POP3 server: enter the IP address or
host name of the server that receives
your e-mail.
When the protocol type is IMAP4
:
-
IMAP4 server: enter the IP address or
host name of the server that receives
your e-mail.
-
POP3 port: enter the POP3 port
number.
-
-
-
User ID: enter the POP3 user name.
-
IMAP4 port: enter the IMAP4 port
number.
Password: enter the POP3 password.
Use SMTP authentication: enable
SMTP authentication, which requires
the user to login before sending
e-mails.
-
-
-
User ID: enter the IMAP4 user name.
Password: enter the IMAP4 password.
Use SMTP authentication: enable
SMTP authentication, which requires
the user to login before sending
e-mails.
-
Same as POP3: select if you want the
SMTP server to have the same
parameters as the POP3 server.
67
Menu functions
-
Same as IMAP4: select if you want
the SMTP server to have the same
parameters as the IMAP4 server.
•
•
Receive: set how your phone receives
push messages. If you select Black list,
the phone will not accept messages from
the specified addresses on the Black list.
-
-
-
SMTP user ID: enter the SMTP user
name.
Black list: manage blocked server
addresses.
SMTP password: enter the SMTP
password.
Broadcast messages (Menu 5.5.5)
Include attachments: select this
option to receive attachments with
e-mails.
You can change the settings for receiving
broadcast messages.
•
Receive: select to receive broadcast
messages, or not.
-
-
Email retrieval limit(1-100): set the
number of headers you will retrieve
from the server.
•
Channel list: indicate the channels from
which you wish to receive broadcast
messages. Please contact your service
provider for further details.
Secure connection: use a secured
connection for e-mail service.
•
Email profile: select a connection
profile to be used for e-mail services. You
can also create or edit a profile.
•
Language: select the preferred
languages in which broadcast messages
display.
ꢀp. 96
Push messages (Menu 5.5.4)
Memory status (Menu 5.6)
You can change the settings for receiving
push messages from the wireless web
server.
Use this menu to view the amount of
memory currently in use in each message
folder.
68
Your service provider supports only count-
based or unlimited-access DRM files.
My files (Menu 6)
The My files menu allows you to access
images, videos, music files, and sound files
stored in the phone’s memory or on a
memory card.
Images (Menu 6.1)
This menu displays photos you have taken
and images you have downloaded, received
in messages, or imported from a computer.
To access this menu, press <Menu> in Idle
mode and select My files
.
Viewing an image
1. Select an image folder.
2. Select an image.
Tips for Digital Rights Management
As a result of the Digital Rights Management
(DRM) system, some of the media items you
download from the Internet or receive by
MMS may require a licence key to access
them.
Viewing a slide show
You can view your photos as a slide show, a
sequential presentation of each photo in the
current folder.
You can acquire the key from the website
which owns the rights to the content; use
the Activate key option.
1. Select My photos
2. Press <Options> and select Slide
show
.
.
Note the following icons on the list:
3. Select an interval option.
The slide show begins.
•
•
: Forwardable item with a valid key.
: Forwardable item without a valid
key.
key.
key.
4. Press <Stop> to stop the slide show.
•
•
: Unforwardable item with a valid
: Unforwardable item without a valid
69
Menu functions
•
•
Lock/Unlock: lock the file to protect it
from being deleted, or unlock the file.
Using image options
While viewing an image, press <Options
to access the following options:
>
Print via Bluetooth: print the image by
connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
•
•
List: return to the image list.
Send via: send the file via MMS, e-mail,
or Bluetooth.
•
•
Details: access the file properties.
•
•
•
Set as: set the image as wallpaper for
the main display or as a caller ID image
for a Phonebook entry.
Key management: manage the licence
keys you have acquired.
Edit: edit the image using the Image
editor if it is a photo taken by the camera
Videos (Menu 6.2)
This menu displays video clips you have
recorded, downloaded, received in
messages, or imported from a computer.
on the phone.ꢀp. 44
Activate key: get a licence key when
the key for the selected DRM file expires.
Video clips recorded on other devices, such
as camcorders, may not play correctly.
•
•
•
Delete: delete the file.
Rename: change the file name.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
Move to: move the file to another folder
or to a memory card.
•
•
Copy to memory card: copy the file to
a memory card.
Visible to Bluetooth: share the file or
the files you want with other Bluetooth
devices.
70
During playback, use the following keys:
•
•
Set as: set the video clip, if saved as a
3gp file, as wallpaper for the main
display or caller ID image for a
Phonebook entry.
Key
Function
Pauses or resumes
playback.
Activate key: get a new licence key
when the key for the selected DRM file
expires.
Left
Returns to the previous file.
Moves backward in a file
when held down.
•
•
•
Delete: delete the file.
Rename: change the file name.
Right
Skips to the next file. Moves
forward in a file when held
down.
Move to: move the file to another folder
or to a memory card.
•
•
Copy to memory card: copy the file to
a memory card.
/
Adjusts the volume.
Stops playback.
Visible to Bluetooth: share the
selected file or the files you want with
other Bluetooth devices.
Down
Using video options
•
Lock/Unlock: lock the file to protect it
from being deleted, or unlock the file.
After playback, press <Options> to access
the following options:
•
•
Details: access the file properties.
•
•
List: return to the video list.
Key management: manage the licence
keys you have acquired.
Send via: send the file via MMS, e-mail,
or Bluetooth.
71
Menu functions
•
•
•
Send via: send the file via MMS, e-mail,
or Bluetooth.
Music (Menu 6.3)
This menu displays music files you have
downloaded or imported from a computer.
Set as: set the file as your ringtone or
as a ringtone for a Phonebook entry.
Select a file. The music player opens.
Activate key: get a new licence key
when the key for the selected DRM file
expires.
ꢀp. 41
When you play a file from this menu,
without first adding it to the play list in the
music player, background play is not
supported.
•
•
•
Delete: delete the file.
Rename: change the file name.
Move to: move the file to another folder
or to a memory card.
Sounds (Menu 6.4)
This menu displays voice memos you have
recorded, and sound files you have
downloaded, received in messages, or
imported from a computer.
•
•
Copy to memory card: copy the file to
a memory card.
Visible to Bluetooth: share the
selected file or the files you want with
other Bluetooth devices.
Playing a sound clip
•
Lock/Unlock: lock the file to protect it
from being deleted, or unlock the file.
1. Select a sound folder.
2. Select a sound clip. For a voice memo,
•
•
Details: access the file properties.
see Voice recorder
Using sound options
While playing a sound clip, press
.ꢀp. 43
Key management: manage the licence
keys you have acquired.
<Options> to access the following options:
•
List: return to the sound list.
72
Other files (Menu 6.5)
Key
Function
Use this menu to view, without corruption,
various document files and files stored in the
phone’s memory. Available file formats are
*.doc, *.xls, *.ppt, *.pdf, and *.txt.
/
Zooms in or out.
1
Searches forward through
the document for the text
you want.
Viewing a document
2
3
Returns to the first page.
Select a file. Picsel File Viewer runs to open
the document.
Searches backward through
the document for the text
you want.
• Depending on the file size or memory
capacity of Picsel File Viewer, some files
may not open properly.
• If a document file contains languages
unsupported by Picsel File Viewer, the
content of the document will not display
correctly.
4
Returns to the previous
page.
5
6
8
9
Rotates the document.
Moves to the next page.
Moves to the last page.
Use the following keys to view the
document:
Key
Function
Shows or hides the map of
the current page.
Up/Down/
Left/Right
Pans around the page.
Changes the display to Full
screen view or Normal
screen view.
Fits the document to the
page size.
73
Menu functions
•
•
Flow mode: switch the screen to Flow
mode. The text is rearranged for easy
viewing in a text file (*.txt). You can
scroll through the text only by pressing
[Up] or [Down].
Using document options
While viewing a document, press
<Options> or < > to access the following
options:
•
•
Full screen view/Normal view: view
the document on a full screen, or return
to Normal view mode.
Hide controller/Show controller: hide
or show the shortcut tool bar of the file
viewer.
Show thumbnail/Hide thumbnail:
display or hide the map of the current
page.
•
•
•
Send via: send the file via MMS, e-mail,
or Bluetooth.
Move to memory card: move the file to
a memory card.
•
•
Zoom: zoom in or out.
Fit to: fit the document to the page size,
screen width, or screen height.
Copy to memory card: copy the file to
a memory card.
•
•
Go to: move to another page of the
document.
•
•
•
Delete: delete the selected file.
Rename: change the file name.
Search word: search for text in the
document.
Visible to Bluetooth: share the file or
the files you want with other Bluetooth
devices.
•
•
Rotate: rotate the document.
Screen panning/Normal panning:
change the panning mode to by screen
or by preset pixel.
•
•
Lock/Unlock: lock the file to protect it
from being deleted, or unlock the file.
Details: access the file properties.
74
•
Shortcuts: view the functions of the
keys you can use in Picsel File Viewer.
Calendar (Menu 7)
The Calendar menu enables you to keep
track of your schedule.
Memory card (Menu 6.6)
To access this menu, press <Menu> in Idle
Use this menu to access the files stored on a
memory card. This menu is shown only
when a memory card is inserted into the
phone.
mode and select Calendar
.
Selecting a day on the calendar
When you enter the Calendar menu, the
calendar in Month view appears with today’s
date indicated by a grey box.
Your phone is preset to use FAT16-formatted
memory cards. If you insert a FAT32-
formatted memory card, the phone will ask
you to reformat the memory card. If you do
not, you will not be able to access the card
from the phone.
•
•
•
Press [Left] or [Right] to move by day.
Press [Up] or [Down] to move by week.
Press [ / ] to move by month.
Memory status (Menu 6.7)
Creating an item
Use this menu to view memory information
for media items in the phone’s memory or
on a memory card. For the phone’s memory,
press [Left] or [Right] to view the memory
status by size or number of items.
You can store appointments, anniversaries,
and tasks on the calendar. More than one
item per day can be stored.
Entering an appointment
1. Select a date on the calendar.
2. Press <Options> and select Create
Appointment
→
.
75
Menu functions
3. Enter information or change the settings:
•
Until: set the ending date, if the
appointment will recur.
•
•
•
Subject: enter a title for the
appointment.
Details: enter the appointment
details.
Start date and Start time: enter
the starting date and time for the
appointment.
4. Press <Save> to save the appointment.
Entering an anniversary
1. Select a date on the calendar.
2. Press <Options> and select Create
Anniversary
3. Enter information or change the settings:
→
.
•
•
AM/PM: select AM or PM in 12-hour
time format.
End date and End time: enter the
ending date and time for the
appointment.
•
Occasion: enter information about
the anniversary.
Date: enter the date.
Alarm: select to set an alarm for the
anniversary.
Before: set how long before the
anniversary the alarm is to alert you.
Alarm time: enter the time for the
alarm to ring.
AM/PM: select AM or PM in 12-hour
time format.
Alarm tone: select an alarm tone.
Repeat every year: set the phone
to remind you of the anniversary
every year.
•
•
•
•
•
•
AM/PM: select AM or PM in 12-hour
time format.
Location: enter information about
the appointed location.
Alarm: set an alarm for the
appointment.
Before: set how long before the
appointment the alarm is to alert
you.
•
•
•
•
•
•
•
Alarm tone: select an alarm tone.
Repeat: set the appointment to
recur and select a repeat unit.
4. Press <Save> to save the anniversary.
76
2. Select an item to view its details.
Entering a task
1. Select a date on the calendar.
3. Press [Left] or [Right] to access the
other items scheduled for the selected
day.
2. Press <Options> and select Create
→
Task
.
While viewing an item, press <Options> to
access the following options:
3. Enter information or change the settings:
•
Task: enter information about the
task.
•
•
•
Edit: edit the item.
•
•
•
Start date: enter the starting date.
Due date: enter the ending date.
Select priority: select a priority
level.
Create: add a new item.
Send via: send the item via SMS, MMS,
e-mail, or Bluetooth.
•
View by: change the view mode of the
4. Press <Save> to save the task.
calendar.ꢀp. 78
•
•
Delete: delete the item.
Consulting the calendar
Memory status: access memory
information for the items stored on the
calendar.
Once you have created items, the type icons
and the number of items for a specific day
appear at the bottom of the calendar.
Using calendar options
•
•
•
Appointment
Anniversary
Task
On the calendar, press <Options> to access
the following options:
•
View by: change the view mode of the
calendar. next section
Create: add a new item.
Viewing an item
1. Select a date on the calendar to display
the items for the day.
ꢀ
•
77
Menu functions
•
Go to: select today’s date or enter a
specific date.
•
•
Recurring item
Task priority (Red: high, Blue:
normal, Grey: low)
•
•
Event list: sort items by type of item.
Delete: delete the items stored on the
calendar by using various deleting
options.
•
Completed task
Week view
You can view items for the selected week. A
cell on the timetable indicates the presence
of a schedule item. Select a cell in the day
you want.
You can delete recurring items in Day
view only.
•
•
Missed alarm events: view items
whose alarms you have missed.
Memory status: access memory
information for the items stored on the
calendar.
Camera (Menu 8)
You can use the camera module embedded
in your phone to take photos and record
videos.
Viewing items in a different mode
You can change the calendar display to Day
view or Week view. Press <Options> and
To access this menu, press <Menu> in Idle
mode and select Camera
.
select View by
→
a view mode.
• Do not take photos of people without their
permission.
• Do not take photos in a place where
cameras are not allowed.
• Do not take photos in a place where you
may interfere with another person’s
privacy.
Day view
You can view items for the selected date.
Select an item to view its details.
The following icons may display to indicate
the item status:
•
Alarm set
78
Taking a photo
4. To
delete the photo
Press
You can take photos in various modes. The
camera produces JPEG photos.
[C] and then
<Yes>.
When you take a photo in direct sunlight or
in bright conditions, shadows may appear on
the photo.
return to Capture
mode
<Preview> or
<Back>.
Taking a photo
1. Access the Camera menu to turn on the
Using camera options in Capture
mode
camera.
In Capture mode, press <
following options:
> to access the
2. Make any desired adjustments.
•
Press <
options.
> to access camera
next section
•
•
Record video: switch to Record mode.
ꢀ
Shooting mode: take a photo in the
following modes:
•
Use the keypad to change the camera
settings or switch to other
Single shot: take a photo in Normal
mode. You can select whether or not the
camera automatically saves a photo.
modes.ꢀp. 80
3. Press [ ] to take a photo. The photo is
automatically saved in the My photos
folder.
Multi-shot: take a series of action stills.
You can select the number of photos the
camera will take and the shooting speed.
4. To
access photo
options
Press
Options>.
Mosaic shot: take several stills and
save them in one frame. You can select
the layout.
<
ꢀp. 81
send the photo by [ ].
MMS
ꢀp. 54
•
Effects: change the colour tone or apply
a special effect.
79
Menu functions
•
Frames: apply a decorative frame.
ISO: change the ISO setting, which
controls the sensitivity of your camera.
For low light situations, select a higher
ISO number. The higher the ISO number,
the faster the camera shutter functions
and the more sensitive the camera is to
light. Higher ISO settings may bring
some distortion to an image.
•
•
•
Timer: set a time delay before the
camera takes a photo.
Go to My photos: access the My
photos folder.
Camera settings: change the default
settings for taking a photo.
Size: select an image size.
•
Camera shortcuts: view the functions
of the keys you can use in Capture
mode.
Quality: select an image quality setting.
Viewfinder: select a preview screen.
Scene programs: set whether or not to
use Night shot mode.
Using the keypad in Capture mode
You can use the keypad to customise your
camera settings in Capture mode.
Shutter sound: select the sound that
you hear when you press the shutter
release key, [ ].
Key
Function
Zoom sound: turn the sound effect for
zooming on or off.
Left/Right
Up/Down
Adjusts the brightness.
Zooms in or out.
Brightness sound: turn the sound
effect for brightness adjustment on or
off.
Flips the image vertically.
Shows the mirror image.
Switches to Record mode.
White balance: adjust the colour
balance of the image. You can make your
photo appear warmer or cooler.
1
ꢀp. 81
80
•
•
Viewfinder: return to Capture mode.
Key
2
Function
Send via: send the file via MMS, e-mail,
or Bluetooth.
Changes the image size.
Changes the image quality.
Changes the shooting mode.
3
•
•
Set as: set the photo as wallpaper for
the main display or as a caller ID image
for a Phonebook entry.
4
5
Changes the colour tone or
applies a special effect.
Edit: edit the photo using the Image
editor.
ꢀp. 44
6
7
8
9
Changes the white balance.
Selects a decorative frame.
Sets the timer.
•
•
•
Delete: delete the file.
Rename: change the file name.
Go to My photos: access the My
photos folder.ꢀp. 69
Changes the ISO settings.
•
•
Lock Unlock: lock the file to protect it
/
from being deleted, or unlock the file.
Sets whether or not to use
Night shot mode.
Print via Bluetooth: print the image by
connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
0
Goes to the My photos folder.
Changes the preview screen.
•
Details: access the file properties.
Using photo options
Recording a video
After saving a photo, press <Options> to
access the following options:
You can record a video of what is displayed
on the camera screen and save it.
•
View: access one of the multi-shot
photos.
81
Menu functions
Recording a video
Using camera options in Record mode
1. In Capture mode, press [1].
In Record mode, press <
following options:
> to access the
2. Make any desired adjustments.
•
•
Take photo: switch to Capture mode.
•
Press <
options.
> to access camera
next section
ꢀ
Effects: change the colour tone or apply
a special effect.
•
Use the keypad to change the camera
settings or switch to other
•
•
•
Timer: set a time delay before the
camera starts recording.
modes.ꢀp. 83
3. Press [ ] to start recording.
Go to My video clips: access the My
video clips folder.
4. Press [ ] or < > to stop recording.
The video is automatically saved in the
My video clips folder.
Camcorder settings: change the
following settings for recording a video:
Recording mode: select a video
recording mode.
5. To
Press
play back the video [ ].
clip
Select Normal to record a video within
the limit of the currently available
memory. The video clip is saved in MP4
format.
access video
options
<Options>.ꢀp. 83
Select Limit for multimedia
delete the video
clip
[
C
] and then <Yes>.
messages/wallpaper to record a video
suitable for messaging or for setting as
wallpaper or caller ID image. The video
clip is saved in 3gp format.
return to Record
mode
<
Preview>.
Size: select a frame size.
82
Quality: select an image quality setting.
Key
1
Function
Viewfinder: select a preview screen.
Shows the mirror image.
Audio record: record a video with
audio.
Switches to Capture
mode.
ꢀp. 79
Zoom sound: turn the sound effect for
zooming on or off.
2
3
4
Changes the frame size.
Brightness sound: turn the sound
effect for brightness adjustment on or
off.
Changes the image quality.
Changes the video recording
mode.
White balance: adjust the colour
balance of the image. You can make your
video appear warmer or cooler.
5
Changes the colour tone or
applies a special effect.
•
Camcorder shortcuts: view the
functions of the keys you can use in
Record mode.
6
7
8
0
Changes the white balance.
Mutes or unmutes audio.
Sets the timer.
Using the keypad in Record mode
You can use the keypad to customise your
camera settings in Record mode.
Goes to the My video clips
folder.
Key
Function
Changes the preview screen.
Left/Right Adjusts the brightness.
Using video options
Up/Down
Zooms in or out.
After saving a video clip, press <Options
to access the following options:
>
Flips the image vertically.
•
Viewfinder: return to Record mode.
83
Menu functions
•
Send via: send the file via MMS, e-mail,
or Bluetooth.
Time and date (Menu 9.1)
Use this menu to change the time and date
displayed on your phone. Before setting the
time and date, specify your time zone in the
•
Set as: set the video clip, if saved as a
3gp file, as wallpaper for the main
display or a caller ID image for a
Phonebook entry.
World clock menu.
ꢀp. 46
•
•
Time: enter the current time.
•
•
•
Delete: delete the file.
AM/PM: select AM or PM in 12-hour
time format.
Rename: change the file name.
Go to My video clips: access the My
•
•
•
•
Time format: select a time format.
Date: enter the current date.
video clips folder.ꢀp. 70
•
•
Lock Unlock: lock the file to protect it
/
Date format: select a date format.
from being deleted, or unlock the file.
Calendar starting day: set which day
of the week the calendar starts with.
Details: access the file properties.
•
Auto update: activates the auto time
update feature. Your phone will read the
MCC (Mobile Country Code) from the
network and automatically update the
current time for the country that you are
in when you travel abroad.
Settings (Menu 9)
The Settings menu provides you with
various setting options to customise the
phone to your preferences and needs. You
can also reset the settings to their default
status.
Time information may not be updated
when you move to one time zone to
another within a country.
To access this menu, press <Menu> in Idle
mode and select Settings
.
84
Assigning a shortcut menu
Phone settings (Menu 9.2)
1. Select a key to be used as a shortcut
key.
Many different features of your phone’s
system can be customised to suit your
preferences.
2. Select a menu to be assigned to the key.
Some menus may not be available,
depending on your service provider.
Using shortcut options
Press <Options> to access the following
options:
Language (Menu 9.2.1)
•
•
•
Change: assign or change a shortcut
menu.
Use this menu to select a language for the
display text. If you select Automatic, the
phone uses the same language as the SIM
card.
Remove: deactivate the shortcut
assignment to the selected key.
Remove all: deactivate all shortcut
assignments.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is
displayed briefly when the phone is switched
on.
My menu (Menu 9.2.4)
You can set up a menu of your own using
your favourite menu items, which can be
easily accessed by pressing [Up] in Idle
mode.
Shortcuts (Menu 9.2.3)
You can use the Navigation keys as
shortcuts to access specific menus directly
from Idle mode. Use this menu to assign a
shortcut to a key. [Up] is fixed as a shortcut
to My Menu mode.
Setting up My menu item
1. Select an item to be changed.
2. Select the menu item you want.
85
Menu functions
Using item options
Offline mode (Menu 9.2.7)
Press <Options> to access the following
options:
Use this menu to switch the phone to Offline
mode or back to Online mode.
•
•
•
•
Assign: assign an item.
Display settings (Menu 9.3)
Change: change the selected item.
Remove: remove the selected item.
Remove all: remove all items.
Use this menu to change settings for the
display and backlight.
Wallpaper (Menu 9.3.1)
Volume key (Menu 9.2.5)
You can set up the idle screen on the main
display.
Use this menu to set whether the phone
mutes the call ringer or rejects a call if you
press and hold [ / ] when a call comes in.
•
Main display: select an image or a
video clip to be displayed on the main
display.
Extra settings (Menu 9.2.6)
You can turn the automatic redialling or
answering feature on or off.
•
•
Calendar wallpaper: set the phone to
display the calendar.
•
Auto redial: set the phone to make up
to ten attempts to redial a phone number
after an unsuccessful call.
Text position: select a text position. If
you do not want to display text in Idle
mode, select Off
.
•
•
Active flip: answer an incoming call by
opening the phone.
•
•
•
Text mode: select a font style.
Text colour: select a font colour.
Anykey answer: answer an incoming
call by pressing any key, except for
Graphic logo: set the phone to display a
graphic icon instead of the service
provider’s logo on the idle screen. This is
only available if a graphic icon has been
received in a message.
<Reject> and [ ].
86
Main menu style (Menu 9.3.2)
Sound settings (Menu 9.4)
You can select a display style for the main
menu screen.
Use this menu to customise various sound
settings.
Skin (Menu 9.3.3)
Incoming call (Menu 9.4.1)
You can select a skin colour pattern for Menu
mode.
Use this menu to change the sound settings
for incoming calls.
•
Ringtone: select a ringtone to be used
for the call ringer.
Brightness (Menu 9.3.4)
You can adjust the brightness of the display
for varying lighting conditions.
•
•
Volume: select a ringtone volume.
Alert type: specify how you are to be
informed of incoming calls.
Dialing display (Menu 9.3.5)
Use this menu to select a font type, and
colour and size for the numbers, and
background colour of the display while
dialling.
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the
phone sounds when you press a key.
You can adjust the key tone volume using
Show caller information (Menu 9.3.6)
[
/
] in Idle mode.
Use this menu to set the phone to display
missed call notifications with the most
recently missed caller’s information.
Message tone (Menu 9.4.3)
Use this menu to change the sound settings
for incoming SMS messages, MMS
messages, e-mails, and broadcast messages
individually.
TV-out settings (Menu 9.3.7)
Use this menu to select a video system for a
TV.
•
Tone: select one of several message
tones.
87
Menu functions
•
Alert type: specify how you are to be
informed when a message comes in.
•
•
Connection tone: set the phone to
beep when an outgoing call connects to
the system.
•
Repetition: specify how often the phone
informs you of a new message.
Alert on call: set the phone to beep
when you receive a new message or
when the time for an alarm comes during
a call.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the
phone sounds when it is switched on or off.
•
Indicative tone: set the phone to beep
when a pop-up window displays.
Flip tone (Menu 9.4.5)
Use this menu to select the tone that the
phone sounds when you open or close the
phone.
Light settings (Menu 9.5)
Use this menu to change the settings for the
light.
Silent mode (Menu 9.4.6)
Backlight time (Menu 9.5.1)
Use this menu to set how the phone acts to
alert you to a specific event while in Silent
mode.
You can select the length of time the
backlight or display stays on.
•
Normal: select the length of time the
backlight stays on.
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones
for the phone.
•
Dimmed: select the length of time the
display stays on in Dim mode after the
backlight turns off. After a specified time,
the display turns off.
•
Minute minder: set the phone to beep
every minute during an outgoing call to
keep you informed of the length of your
call.
•
Show cover indicators: use this menu
to set whether or not the icons are
shown on the external display after the
display turns off.
88
•
•
No reply: divert calls when you do
not answer the phone.
Keypad light (Menu 9.5.2)
Use this menu to set how the phone controls
the use of the keypad light. Select one of the
following options in the Use at line:
Unreachable: divert calls when you
are not in your service area or when
your phone is switched off.
Cancel all: cancel all call diverting
options.
•
•
•
Any time: the keypad light is always
used.
•
Night time: the keypad light is used
only between 5:00 PM and 9:00 AM.
2. Select the type of calls to be diverted.
3. Select Activate. To deactivate call
Custom time: you can specify the time
period that the keypad light is used.
diverting, select Deactivate
.
4. Move to the Divert to line.
Network services (Menu 9.6)
5. Enter the number to which calls are to be
diverted.
Use this menu to access network services.
Please contact your service provider to
check their availability and subscribe to
them, if you wish.
6. If you selected No reply, move to the
Seconds line and select the length of
time the network delays before diverting
a call.
Call diverting (Menu 9.6.1)
7. Press <Select>.
This network service reroutes incoming calls
to a phone number that you specify.
Call barring (Menu 9.6.2)
1. Select a call diverting option:
This network service allows you to restrict
your calls.
•
•
Divert always: divert all calls.
Busy: divert calls when you are on
another call.
1. Select a call barring option:
•
All outgoing calls: prohibit all
outgoing calls.
89
Menu functions
•
•
International: prohibit international
calls.
Call waiting (Menu 9.6.3)
This network service informs you when
someone is trying to reach you while you are
on another call.
International except home: only
allow calls to numbers within the
current country when you are
abroad, and to your home service
area.
All incoming calls: prohibit
incoming calls.
Incoming while abroad: prohibit
incoming calls when you use your
phone outside of your home service
area.
Cancel all: cancel all call barring
settings, allowing calls to be sent and
received normally.
1. Select the type of calls to which call
waiting option will apply.
2. Select Activate. To deactivate call
•
•
waiting, select Deactivate
.
Network selection (Menu 9.6.4)
This network service allows you to manually
select the network to be used while roaming
outside of your home area, or to let the
network be chosen automatically.
•
•
You can select a network other than your
home network only if there is a valid
roaming agreement between the two.
Change barring password: change
the call barring password obtained
from your service provider.
Caller ID (Menu 9.6.5)
This network service allows you to hide your
phone number from the person you are
calling. If you select Default, the phone will
use the default setting provided by the
network.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call
barring, select Deactivate
.
4. Enter the call barring password supplied
by your service provider and press
Some networks may not allow you to
change this setting.
<Select>.
90
•
Default group: enable the default CUG,
if you have set one with your service
provider. When making a call, you are
given the option of using your default
CUG, instead of selecting one from the
list.
Voice mail server (Menu 9.6.6)
Use this menu to store the number of the
voicemail server and access your voicemails.
You must store the voicemail server number
before accessing the server. Your service
provider can give you the number.
Bluetooth (Menu 9.7)
•
•
Connect to voice server: connect to
the voicemail server to listen to your
messages.
Using the Bluetooth feature, you can
connect the phone wirelessly to other
Bluetooth devices and exchange data with
them, talk hands-free, or control the phone
remotely.
Voice server number: enter the
voicemail server number.
Closed user group (Menu 9.6.7)
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since
the devices communicate using radio waves,
they do not need to be in line of sight to
each other.
Use this menu to set incoming and outgoing
calls to be restricted to a selected user
group. For details about how to create a
closed user group (CUG), contact your
service provider.
•
Index list: add, delete, or activate CUG
index numbers.
• If there are obstacles between the devices,
the operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera,
and music player, or vice versa, for better
performance.
•
Outside access: enable calls to
numbers other than those in the closed
user group. This feature depends on the
nature of your CUG subscription.
• Some devices may not be compatible with
your phone.
91
Menu functions
2. Select Search for new devices
.
Setting up the Bluetooth feature
After searching, a list of devices to which
you can connect displays. The following
icons indicate the type of device:
The Bluetooth menu provides the following
options:
•
•
•
Activation: activate or deactivate the
Bluetooth feature.
•
•
•
•
•
•
•
Stereo headset
Mobile phone
Unknown device
Computer
Printer
PDA
My devices: search for connectable
Bluetooth devices.
My phone’s visibility: allow other
Bluetooth devices to search for your
phone.
Mono headset or hands-free car
kit
•
•
•
My phone’s name: assign a Bluetooth
device name to your phone, which is
then displayed on other devices.
The colour of the icon indicates the
status of the device:
Secure mode: determine if the phone
asks for your confirmation when other
devices access your data.
•
•
•
Grey for unpaired devices
Blue for paired devices
Orange for devices that are currently
connected to your phone
Bluetooth services: display available
Bluetooth services.
3. Select a device.
Searching for and pairing with a
Bluetooth device
1. From the Bluetooth menu, select My
4. Enter a Bluetooth PIN and press <OK>.
This code is used just once and you do
not need to memorise it.
devices
.
92
When the owner of the other device
enters the same code, pairing is
complete.
•
Delete: remove the selected device or
all devices from the list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
Some devices, especially headsets or hands-
free car kits, may have a fixed Bluetooth
PIN, such as 0000. If the other device has a
code, you must enter it.
2. Select the application in which the item
you want to send is stored.
3. Select the item you want and press
Using device options
<Options>.
From the device list, press <Options> to
access the following options:
4. Select Send via
→
Bluetooth.
5. Select a device.
•
•
•
Connect: connect to a headset or
hands-free car kit.
6. For Phonebook, select which data you
want to send.
Disconnect: end the connection with
the connected device.
7. If necessary, enter the Bluetooth PIN
needed for pairing and press <OK>.
Browse files: search for data from the
device and import data directly to your
phone.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its
visibility must be enabled.
•
Service list: access the Bluetooth
service list of the device.
•
•
Rename: rename the paired device.
1. If an unauthorised Bluetooth device
sends data to your phone, press <Yes
to allow the device to access your phone.
>
Authorise device/Unauthorised
device: determine whether or not the
phone asks you to permit connection
when other devices try to connect to
your phone.
2. Press <Yes> to receive data.
93
Menu functions
When this feature is enabled, you must
enter a 4- to 8-digit phone password each
time the phone is switched on.
Security (Menu 9.8)
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and SIM card.
The password is preset to 00000000. To
change the password, use the Change
password menu.
If you enter an incorrect PIN/PIN2 three
times, the SIM card is blocked. To unblock it,
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by
your service provider.
Change password (Menu 9.8.4)
Use this menu to change your phone
password.
PIN check (Menu 9.8.1)
Privacy (Menu 9.8.5)
The 4- to 8-digit PIN (Personal Identification
Number) protects your SIM card against
unauthorised use. When this feature is
enabled, the phone requires your PIN each
time it is switched on.
Use this menu to lock access to messages,
media files, all menu functions on the
phone, except for call functions.
When a privacy option is enabled, you must
enter the phone password to access the
locked items or functions.
Change PIN code (Menu 9.8.2)
Use this menu to change your PIN. The PIN
check feature must be enabled to change
the PIN.
SIM lock (Menu 9.8.6)
This menu allows your phone to work only
with the current SIM by assigning a SIM lock
code. You must enter the SIM lock code to
use a different SIM card.
Phone lock (Menu 9.8.3)
Use this menu to lock the phone from
unauthorised use.
94
1. Enter the phone password and press
OK>.
2. Specify the following options:
Fixed dialling mode (Menu 9.8.7)
<
If supported by your SIM card, Fixed Dialling
Number (FDN) mode restricts your outgoing
calls to a limited set of phone numbers.
When this feature is enabled, you can make
calls only to phone numbers stored on the
SIM card.
•
Mobile tracker: activate the Mobile
tracker feature.
•
Recipients: specify phone numbers
to which you want to send the
tracking messages.
Change PIN2 code (Menu 9.8.8)
•
•
Sender: enter the sender’s name.
Message: check the preset tracking
message text.
If supported by your SIM card, use this
menu to change your current PIN2.
Mobile tracker (Menu 9.8.9)
3. When you have finished, press <Save>.
When someone tries to use your phone with
another SIM card, the phone will
Connection settings (Menu 9.9)
automatically send the preset tracking
message to your family or friends. You can
check the phone number from which the
messages are sent and then track your
phone. This feature is useful when the phone
is stolen or lost.
Use this menu to create and customise the
profiles containing the settings for
connecting your phone to the network. You
need these settings to use the web browser
or send MMS messages or e-mails.
Your phone is set by default for connecting
to the network by default. If you change the
settings without first checking with your
service provider, the web browser, MMS, and
e-mail features may not work properly.
Sending of the tracking message will be
billed to the user of the unauthorised SIM
card. To use your phone with any other SIM
card, you must first deactivate the Mobile
tracker feature.
95
Menu functions
•
•
Bearer: select the network bearer
type.
Advanced settings: change the
advanced options. Depending on the
bearer setting, available options vary.
Creating a profile
1. Press <New>. If a profile has already
been saved, press <Options> and
select Add new connection
.
2. Specify profile parameters:
When the bearer is set to GPRS
:
•
•
Profile name: enter a profile name.
APN: enter the access point name.
Homepage URL: enter the URL
address of the page to be used as
your homepage.
Login ID: enter the login ID.
Password: enter the login
password.
•
•
•
•
Proxy: activate or deactivate the
proxy server.
IP address: enter the IP address of
the proxy server.
Port: enter the port number of the
proxy server.
Linger time: set a time period after
which the network is disconnected if
there has been no new data traffic in
that time.
When the bearer is set to GSM
:
Dial number: enter the PPP phone
number.
Login ID: enter the login ID.
Password: enter the login
password.
Data call type: select a call type for
data transmission.
•
•
DNS: activate or deactivate the DNS
(Domain Name Server) addresses.
DNS 1 and DNS 2: enter the primary
and secondary DNS addresses.
3. Press <Save> to save the profile.
Using profile options
Press <Options> to access the following
options:
•
Edit: edit the selected profile.
96
•
•
Delete: delete the profile.
Solve problems
Help and personal needs
Add new connection: add a new
profile.
To save the time and expense of an
unnecessary service call, perform the simple
checks in this section before contacting a
service professional.
Reset settings (Menu 9.10)
Use this menu to reset the phone’s settings
you have changed.
1. Press [ ] to select the setting categories
to be reset.
When you switch on your phone, the
following messages may appear:
2. Press <Reset>.
“Insert SIM card”
3. Press <OK> to confirm the reset.
4. Enter the phone password and press
•
Be sure that the SIM card is correctly
installed.
<
OK>.
The password is preset to 00000000
You can change this password. p. 94
“Enter password”
.
•
The automatic locking function has been
enabled. You must enter the phone’s
password before you can use the phone.
ꢀ
“Enter PIN”
•
You are using your phone for the first
time. You must enter the PIN supplied
with the SIM card.
•
The PIN check feature is enabled. Every
time the phone is switched on, the PIN
has to be entered. To disable this
feature, use the PIN check menu.
97
Solve problems
“Enter PUK”
•
•
Be sure that you are accessing the
correct cellular network.
•
The PIN has been entered incorrectly
three times, and the SIM card is now
blocked. Enter the PUK supplied by your
service provider.
Be sure that you have not set an
incoming call barring option.
Your correspondent cannot hear you
speaking
“No service,” “Network failure,” or “Not
done” displays
•
Be sure that you have switched on the
microphone.
•
The network connection has been lost.
You may be in a weak signal area. Move
and try again.
•
Be sure that you are holding the phone
close enough to your mouth. The
microphone is located at the bottom of
the phone.
•
You are trying to access an option for
which you have no subscription with your
service provider. Contact the service
provider for further details.
The phone starts beeping and
“Warning. Low battery” flashes on the
display
You have entered a number but it was
not dialled
•
Your battery is insufficiently charged.
Recharge the battery.
•
•
Be sure that you have pressed [ ].
Be sure that you have accessed the right
cellular network.
The audio quality of the call is poor
•
Check the signal strength indicator on
the display ( ). The number of bars
indicates the signal strength from strong
) to weak ( ).
•
Be sure that you have not set an
outgoing call barring option.
(
Your correspondent cannot reach you
•
Try moving the phone slightly or moving
closer to a window if you are in a
building.
•
Be sure that your phone is switched on.
([ ] pressed for more than one
second.)
98
No number is dialled when you re-call a
Phonebook entry
Health and safety
information
•
Use the Contact list menu to ensure the
number has been stored correctly.
SAR certification information
•
Re-store the number, if necessary.
This phone meets European Union (EU)
requirements concerning exposure to radio
waves.
The battery does not charge properly or
the phone sometimes turns itself off
•
Wipe the charging contacts both on the
phone and on the battery with a clean
soft cloth.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured to
not exceed the limits for exposure to radio-
frequency (RF) energy, as recommended by
the EU Council. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed
by independent scientific organisations
through the periodic and thorough
If the above guidelines do not help you
to solve the problem, take note of:
•
The model and serial numbers of your
phone
•
•
Your warranty details
A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
evaluation of scientific studies. The limits
include a substantial safety margin designed
to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones
employs a unit of measurement known as
Specific Absorption Rate (SAR). The SAR
limit recommended by the EU Council is
1
2.0W/kg.
99
Health and safety information
The highest SAR value for this model phone
Precautions when using batteries
was 0.337W/kg
.
•
•
•
Never use a charger or battery that is
damaged in any way.
SAR tests are conducted using standard
operating positions with the phone
Use the battery only for its intended
purpose.
transmitting at its highest certified power
level in all tested frequency bands. Although
the SAR is determined at the highest
certified power level, the actual SAR level of
the phone while operating can be well below
the maximum value. This is because the
phone is designed to operate at multiple
power levels so as to use only the power
required to reach the network. In general,
the closer you are to a base station, the
lower the power output of the phone.
If you use the phone near the network’s
base station, it uses less power. Talk and
standby time are greatly affected by the
signal strength on the cellular network
and the parameters set by the network
operator.
•
•
Battery charging time depends on the
remaining battery charge, the type of
battery, and the charger used. The
battery can be charged and discharged
hundreds of times, but it will gradually
wear out. When the operation time is
noticeably shorter than normal, it is time
to buy a new battery.
Before a new model phone is available for
sale to the public, compliance with the
European R&TTE Directive must be shown.
This directive includes as one of its essential
requirements the protection of the health
and safety of the user and any other person.
If left unused, a fully charged battery will
discharge itself over time.
1. The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary, depending on national reporting
requirements and the network band.
100
•
Use only Samsung-approved batteries,
and recharge your battery only with
Samsung-approved chargers. Disconnect
the charger from the power source when
it is not in use. Do not leave the battery
connected to a charger for more than a
week, since overcharging may shorten
its life.
•
Do not short-circuit the battery.
Accidental short-circuiting can occur
when a metallic object like a coin, clip or
pen causes a direct connection between
the + and – terminals of the battery
(metal strips on the battery). For
example, do not carry a spare battery in
a pocket or bag where the battery may
contact metal objects. Short-circuiting
the terminals may damage the battery or
the object causing the short-circuiting.
•
•
Extreme temperatures will affect the
charging capacity of your battery: it may
require cooling or warming first.
•
Dispose of used batteries in accordance
with local regulations. Always recycle. Do
not dispose of batteries in a fire.
Do not leave the battery in hot or cold
places because the capacity and lifetime
of the battery will be reduced. Try to
keep the battery at room temperature. A
phone with a hot or cold battery may not
work temporarily, even when the battery
is fully charged. Li-ion batteries are
particularly affected by temperatures
below 0°C (32°F).
Road safety
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
When you are driving a car, driving is your
first responsibility. When using your wireless
phone while driving, follow local regulations
in the country or region you are in.
101
Health and safety information
Operating environment
Electronic devices
Remember to follow any special regulations
in force in the area you are in, and always
switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Most modern electronic equipment is
shielded from radio frequency (RF) signals.
However, certain electronic equipment may
not be shielded against the RF signals from
your wireless phone. Consult the
manufacturer to discuss alternatives.
When connecting the phone or any
accessory to another device, read its user’s
guide for detailed safety instructions. Do not
connect incompatible products.
Pacemakers
Pacemaker manufacturers recommend that
a minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference
with the pacemaker. These
recommendations are consistent with the
independent research and recommendations
of Wireless Technology Research. If you
have any reason to suspect that interference
is taking place, switch off your phone
immediately.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and
for the safety of personnel, it is
recommended that the equipment should
only be used in the normal operating
position (held to your ear with the antenna
pointing over your shoulder).
Hearing aids
Some digital wireless phones may interfere
with some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss
alternatives.
102
Other medical devices
Potentially explosive environments
If you use any other personal medical
devices, consult the manufacturer of your
device to determine if it is adequately
shielded from external RF energy.
Switch off your phone when in any area with
a potentially explosive atmosphere, and
obey all signs and instructions. Sparks in
such areas could cause an explosion or fire
resulting in bodily injury or even death.
Your physician may be able to assist you in
obtaining this information.
Users are advised to switch off the phone
while at a refuelling point (service station).
Users are reminded of the need to observe
restrictions on the use of radio equipment in
fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting
operations are in progress.
Switch off your phone in health care facilities
when regulations posted in these areas
instruct you to do so.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the
manufacturer or its representative regarding
your vehicle.
Areas with a potentially explosive
atmosphere are often but not always clearly
marked. They include the areas below decks
on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum
gas, such as propane or butane, areas
where the air contains chemicals or
particles, such as grain, dust or metal
powders, and any other area where you
would normally be advised to turn off your
vehicle engine.
You should also consult the manufacturer of
any equipment that has been added to your
vehicle.
Posted facilities
Switch off your phone in any facility where
posted notices require you to do so.
103
Health and safety information
Certain features like Call Barring may need
to be deactivated before you can make an
emergency call. Consult this document and
your local cellular service provider.
Emergency calls
This phone, like any wireless phone,
operates using radio signals, wireless, and
landline networks as well as user-
programmed functions, which cannot
guarantee connection in all conditions.
Therefore, you should never rely solely on
any wireless phone for essential
Other important safety information
•
Only qualified personnel should service
the phone or install the phone in a
vehicle. Faulty installation or service may
be dangerous and may invalidate any
warranty applicable to the device.
communications like medical emergencies.
To make or receive calls, the phone must be
switched on and in a service area with
adequate signal strength. Emergency calls
may not be possible on all wireless phone
networks or when certain network services
and/or phone features are in use. Check
with local service providers.
•
•
Check regularly that all wireless phone
equipment in your vehicle is mounted
and operating properly.
Do not store or carry flammable liquids,
gases, or explosive materials in the same
compartment as the phone, its parts, or
accessories.
To make an emergency call:
1. Switch on the phone.
•
For vehicles equipped with an air bag,
remember that an air bag inflates with
great force. Do not place objects,
including installed or portable wireless
equipment, in the area over the air bag
or in the air bag deployment area.
Improperly installed wireless equipment
could result in serious injury if the air
bag inflates.
2. Key in the emergency number for your
present location. Emergency numbers
vary by location.
3. Press [ ].
104
•
•
Switch off your phone before boarding an
aircraft. It is dangerous and illegal to use
wireless phones in an aircraft because
they can interfere with the operation of
the aircraft.
•
•
•
Do not use the phone with a wet hand.
Doing so may cause an electric shock to
you or damage to the phone.
Do not use or store the phone in dusty,
dirty areas, as its moving parts may be
damaged.
Failure to observe these instructions may
lead to the suspension or denial of
telephone services to the offender, or
legal action, or both.
Do not store the phone in hot areas.
High temperatures can shorten the life of
electronic devices, damage batteries,
and warp or melt certain plastics.
Care and maintenance
•
Do not store the phone in cold areas.
When the phone warms up to its normal
operating temperature, moisture can
form inside the phone, which may
damage the phone’s electronic circuit
boards.
Your phone is a product of superior design
and craftsmanship and should be treated
with care. The suggestions below will help
you fulfill any warranty obligations and allow
you to enjoy this product for many years.
•
Keep your phone and all its parts and
accessories out of the reach of small
children and pets. They may accidentally
damage these things or choke on small
parts.
•
•
Do not drop, knock, or shake the phone.
Rough handling can break internal circuit
boards.
Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean
the phone. Wipe it with a soft cloth
slightly dampened in a mild soap-and-
water solution.
•
Keep the phone dry. Precipitation,
humidity, and liquids contain minerals
that corrode electronic circuits.
105
Health and safety information
•
Do not paint the phone. Paint can clog
the device’s moving parts and prevent
proper operation.
•
If the phone, battery, charger, or any
accessory is not working properly, take it
to your nearest qualified service facility.
The personnel there will assist you, and
if necessary, arrange for service.
•
•
Do not put the phone in or on heating
devices, such as a microwave oven,
stove, or radiator. The phone may
explode when overheated.
When the phone or battery gets wet, the
label indicating water damage inside the
phone changes colour. In this case,
phone repairs are no longer guaranteed
by the manufacturer's warranty, even if
the warranty for your phone has not
expired.
•
•
If your phone has a flash or light, do not
use it too close to the eyes of people or
animals. This may cause damage to their
eyes.
Use only the supplied or an approved
replacement antenna. Unauthorised
antennas or modified accessories may
damage the phone and violate
regulations governing radio devices.
106
Index
Call log
dialled • 35
missed • 35
received • 35
Call time • 35
Caller groups • 38
A
D
AB mode, text input • 28
Active flip • 86
Alarm • 47
Date, set • 84
Deleting
call log • 34
e-mail • 60
events • 77
MMS • 58 60
phonebook • 37
SMS • 58 60 62
Dialled calls • 35
Answering
,
61, 62
call • 31
Caller ID • 87
Calls
,
90
second call • 32
Anykey answer • 86
Auto redial • 86
,
,
62
40
,
answering • 31
barring • 89
diverting • 89
holding • 32
redialling • 30
rejecting • 31
waiting • 90
,
,
B
Dialling font, set • 87
Display
Background image • 86
Backlight, set
display • 88
brightness • 87
icons • 11 12
language • 85
layout • 11
settings • 86
,
keypad • 89
Barring, calls • 89
Battery
Camera
photos • 79
videos • 81
charging • 7
Diverting, calls • 89
Document files • 73
DRM (DigitalRights Management)
• 69
DTMF tones, send • 33
low indicator • 8
precautions • 100
Bluetooth
CB (Cell Broadcast) messages •
59 68
,
Characters, enter • 28
Configuration messages • 57
Connection tone • 88
Converter • 48
Creating messages
e-mail • 55
MMS • 54
SMS • 53
CUG (Closed User Group) • 91
receiving, data • 93
sending, data • 93
settings • 92
E
Broadcast messages • 59
Browser, web • 50
,
68
E-mails
creating/sending • 55
deleting • 61
setting • 65
viewing • 60
Emergency calls • 104
C
Calculator • 47
Calendar • 75
Call cost • 36
107
Index
Minute minder • 88
Missed calls • 35
display • 11
F
L
icons • 11
FDN (Fixed Dialling
Number) mode • 95
File manager • 69
File viewer • 73
Language, select • 85
Light settings • 88
Locking
creating/sending •
54
deleting • 58
setting • 64
viewing • 57
password • 94
resetting • 97
switching on/off • 8
Flip tone • 88
menu functions •
94
unpacking • 6
Phonebook
,
8
G
phone • 94
Games • 45
Mobile tracker • 95
Multiparty-call • 34
Music player • 40
Music, downloaded • 72
My menu • 15
adding • 37
deleting • 37
finding • 36
managing • 39
options • 37
SIM card • 94
Low battery indicator • 8
Greeting message • 85
,
40
H
M
Health and safety • 99
Holding, call • 32
Memory card
accessing files • 75
installing • 25
Memory status
downloadeditems•
75
speed dialling • 38
N
I
Photos
Name card • 39
Names
Icons, description • 11
Image editor • 44
Images, downloaded • 69
Inbox, messages
e-mail • 60
taking • 79
viewing • 69
entering • 28
searching • 36
Network selection • 90
Network services • 89
PIN, change • 94
PIN2, change • 95
Power on/off tone • 88
Privacy • 94
file manager • 75
messages • 68
phonebook 40
Menu style • 87
Message tone • 87
Messages
MMS/SMS • 57
International calls • 30
Internet • 50
Push messages • 59 68
,
O
Outbox, messages • 59
Q
J
Quiet mode
switching • 15
cell broadcast • 59
,
P
Java applications • 45
68
Password
call barring • 90
phone • 94
Phone
configuration • 58
K
R
e-mail • 55
,
60
Key tones
Received calls • 35
Received messages
e-mail • 60
greeting • 85
selecting • 87
sending/muting •
33
MMS • 54
push • 59
SMS • 53
,
58
68
57
care and mainte-
nance •
,
MMS/SMS • 57
,
105
108
Recording
videos • 81
voice memos • 43
Redialling
automatically • 86
manually • 30
Resetting phone • 97
Ringer
incoming calls • 87
messages • 87
Road safety • 101
Roaming • 90
Sound settings • 87
Sounds, downloaded • 72
Speed dial • 38
Stopwatch • 48
Switching on/off
phone • 8
Web browser
access • 50
World clock • 46
T
T9 mode, text input • 29
Templates, message • 62
Text, enter • 28
Time, set • 84
Timer • 48
S
Safety
TV out
information • 99
precautions • 1
Security, calls • 94
Sent messages • 60
Shortcut • 85
Silent mode
setting • 88
SIM card
inserting • 7
locking • 94
Skin colour • 87
SMS messages
creating/sending •
53
setting • 87
viewing on TV
screen
• 27
V
Videos
playing • 70
recording • 81
Voice recorder
playing • 43
recording • 43
Voicemail server • 91
W
deleting • 58
setting • 63
viewing • 57
Waiting call • 90
Wallpaper • 86
109
Declaration of Conformity (R&TTE)
For the following product:
GSM900/GSM1800/GSM1900 with Bluetooth
Portable Cellular Telephone
(Product description)
SGH-D830
(Model name)
Manufactured at:
Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City,
Kyung Buk, Korea, 730-350
*
(factory name, address )
to which this declaration relates, is in conformity with the following standards and/or
other normative documents.
Safety
EMC
:
:
:
:
:
:
:
EN 60950-1:2001
EN 301 489-01 v.1.4.1 (08-2002)
EN 301 489-07 v.1.2.1 (08-2002)
EN 301 489-17 v.1.2.1 (08-2002)
EN 50360:2001
SAR
EN 50361:2001
EN 301 511 v9.0.2 (03-2003)
EN 300 328 v1.6.1 (11-2004)
Network
We hereby declare the [all essential radio test suites have been carried out and that]
the above named product is in conformity to all the essential requirements of
Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in
Annex[IV] of Directive 1999/5/EC has been followed with the involvement of the
following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark: 0168
The technical documentation kept at:
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2006. 06. 19
Yong-Sang Park/S. Manager
(place and date of issue)
(name and signature of authorised person)
*
It is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service
Centre, see the warranty card or contact the retailer where you purchased your phone.
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
Printed in Korea
World Wide Web
Code No.:GH68-11436A
http://www.samsungmobile.com
English (EU). 07/2006. Rev. 1.0
|