CONTENTS
REMOTE CONTROL & TV CONNECTIONS
4
5
IMPORTANT SAFEGUARDS
INSTALLATION
IN STRUCTIO N MAN UAL
CO LO UR TELEVISIO N
5
START UP
6
CONNECTING EXTERNAL EQUIPMENT
DAILY USE
6
7
MENUS DESCRIPTION
TELETEXT
10
15
TROUBLESHOOTING
SPECIFICATION
18
19
PF2 8 W T1 0 0
3
START UP
Front
LANGUAGE MENU
TV/AV SELECTION
The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used
for all the OSD (On Screen Display) menus. The user must enter a choice of language before proceeding further.
Allows to switch between TV and external modes.
By repeatedly pressing the remote control TV / AV (A5) or the TV front panel TV /
AV (B7) button, the on-screen display is changed as shown :
The language entered at this stage can still be modified at any later time, by entering the LANGUAGE menu (accessed from the FEATURES menu: see later
section under MENU DESCRIPTION).
AV1 > AV2 > SVHS > TV
The descriptions used in the menu are those of the country code (e.g. AUS= Australia, NL = Holland etc).
HEADPHONE SOCKET
To hear TV sound with
headphones, insert a 3.5mm
headphone plug into the
headphone socket (B4). The
speaker’s sound will be
automatically cut off.
Selection is made by use of the remote control CURSOR UP (A6) / CURSOR DOWN (A21) keys and CURSOR RIGHT
(A20) / LEFT (A7) keys.
VIDEO GAME
FRONT AV SOCKET (AV2)
FRONT S-VIDEO JACK (Option for real flat TVs)
Once you are satisfied with your selection, push the OK button (A18) to confirm your choice. The choice will briefly
highlight in red, after which the menu will disappear.
The front AV socket (B2) - (B3)
has audio and video inputs. To
switch from TV to these inputs,
use the TV / AV buttons (A5) or
(B7) and select AV2.
The front S-VIDEO jack (B10) has video inputs only.
It is necessary to connect the audio inputs to socket (B3)
in order to have audio and video. To switch from TV to
these inputs, use the TV / AV buttons (A5) or (B7) and
select SVHS.
OR
Note : The languages shown are subject to modification without prior notice.
CAMCORDER
AUTOMATIC TUNING
Automatic Tuning System
ATSS = Automatic Tuning and Sorting System. To start the ATSS function:
- Select "ATSS " function.
- Adjust to the required country.
DAILY USE
- Press and hold the OK button (A18) to start the automatic tuning.
The ATSS function has started when the phrase "Please Wait !" appears (in red characters ) in the help instructions box, below the Install menu.
When the ATSS function is finished, the stored programs are displayed on screen using Edit menu presentation (to Exit tuning before automatic
tuning is finished, press the remote control MENU button (A19) ).
SWITCHING ON TV SET
1) If stand-by indicator (B5) is red, then
the TV set is in stand-by mode.
You can switch on using the remote
control POWER button (A1), the
2) If stand-by indicator (B5) is not lit,
then the TV set is powered off.
You must press the TV set front
panel MAIN POWER button (B1).
If a picture does not appear, then
the stand-by indicator will be
3) If stand-by indicator (B5) is flashing red, and
green then the TV set is in child-lock mode.
It is necessary to use the remote control
POWER button (A1), NUMBER 0….9 buttons
(A3), or PROGRAM UP (A6) / DOWN (A21)
buttons. The front panel PROGRAM
UP/DOWN buttons (B9) will not function.
Once on, the stand-by indicator turns to green
and the picture appears on the screen.
NUMBER 0….9 buttons (A3), or
CONNECTING EXTERNAL EQUIPMENT
The rear RCA(C1)(C2), RCA(C4)(C5) sockets, the front AV socket (B2) (B3), and the S-VHS socket (B10)
are three dedicated sockets to connect audio-video equipment.
If you push the button PR UP/DOWN, you can change from mode AV1(or AV2) to mode TV.
PROGRAM UP (A6) / DOWN (A21)
buttons. The front panel PROGRAM
UP/DOWN buttons (B9) can also be used.
Once on, the stand-by indicator turns to
green and the picture appears on the screen.
lighted red. In this case, use the
remote control as indicated in 1).
Rear
REAR VIDEO & AUDIO SOCKET (AV1)
This socket (C1)(C2) has video / audio inputs .
Use the TV/AV buttons (A5) or (B7) to select AV1.
REAR MONITOR OUT SOCKET
1)Pressing the remote control POWER
button (A1), you can switch off to
stand-by mode (low power
consumption mode) which also allows
quick restart by remote control (see
above: SWITCHING ON TV SET).
2)Pressing the TV set front panel MAIN
POWER button (B1), you can completely
power off the TV set. In this case, you
must use the same front panel POWER
button (B1) to switch on again (see above:
SWITCHING ON TV SET).
SWITCHING OFF
TV SET
This socket (C4)(C5) has video / audio outputs.
Remark: If a broadcast signal is not present after 30 minutes, the TV set will be automatically turned to stand-by mode.
6
7
PROGRAM SELECTION (FROM 0 TO 99)
PICTURE CONTROL
You can select three pictures settings, by using the remote control NORMAL button (A17) :
Normal I (standard hard picture)
Normal II (standard soft picture)
Favourite
Direct selection
Up / Down selection
Use the remote control NUMBER 0….9 buttons (A3).
For two digits program numbers, enter the second
digit within 2 seconds.
Use the remote control PROGRAM UP (A6) / DOWN
(A21) buttons or the TV set front panel PROGRAM
UP / DOWN buttons (B9).
-
-
-
For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE
REDUCTION, use the PICTURE menu.
If an NTSC signal is received, then the TINT adjustment will also be available.
SOUND CONTROL
Mono forcing, dual language
If you are unable to get good sound
-
01
ABC
01
ABC
01
ABC
FAVOURITE
18:20
Volume adjustment
quality for a program due to poor
reception, you can force a change
from stereo to mono transmission by
pressing the remote control MODE
button (A14). Then the program status
display will indicate "MONO" with a
icon.
NORMAL I
NORMAL II
Use the remote control VOLUME
UP (A20) / DOWN (A7) buttons or
the TV set front panel VOLUME UP
/ DOWN buttons (B8).
18:20
18:20
FREEZE picture
- On the other hand, during a program
with dual language transmission, the
MODE button (A14) allows you to
toggle between the first and second
language. The program status
display will indicate "DUAL 1" or
"DUAL 2" (plus NICAM according to
the received signal).
This TV scans at 100Hz. It has an additional FREEZE picture function that holds the current image on the screen (similar in effect to
the “pause” function of a video player). To freeze the image at any time, just press on the yellow FREEZE button (A26). This
function is available with any signal source (from aerial, video player, DVD).
The display will indicate that the FREEZE function is activated. A second press on the same button (A26), entry to the MAIN menu
(A19), or change of program will cancel the FREEZE function.
- To return to initial state, press again
the MODE button (A14).
Channel number
Clock
01
ABC
Channel name
PROGRAM STATUS
DISPLAY (Recall)
Mute
MONO
18:20
Sound transmission Mode:
Displayed with forced icon(
only if forced to mono by
MODE button (A14)
Mute the sound by pressing the remote control
SOUND MUTE button (A2).
)
Then,
logo is displayed. The previous sound
setting is returned after pressing the same button
a second time.
If a sound related function is used (e.g. VOLUME,
3D) then the MUTE will also be cancelled.
Sound effects
Use the remote control RECALL button (A16) to display (for 4 seconds only) program status
information. This display appears also after a program selection or after switching on the TV set.
A SPATIAL sound effect is available, using the remote
control 3D (A13) button.
The following display appears:
Spatial sound effect
SPATIAL
STEREO
18:20
SLEEP FUNCTION
The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEP
button (A4), you can enter one of the following settings :
Sound transmission mode
Clock
OFF > 20 min > 40 min > 60 min > 80 min > 100 min > 120 min > OFF
To return to initial sound effect, press again the 3D (A13) button.
The following display appears:
01
ABC
20
STEREO
Remaining time (minutes)
before TV set switches off
No sound effect
OFF
Sound transmission mode
STEREO
Clock
18:20
The SLEEP time remaining (before TV turn-off) can be seen again at any time by one
touch on the remote control SLEEP button (A4).
A second touch (while the status display is active) will modify the SLEEP time
remaining.
Manufactured under license from Dolby Laboratories, "Dolby"
and the double-D symbol are trademarks of Dolby Laboratories.
As an option, the sound effects PANORAMA and Dolby Virtual are
available with the same button. For other adjustments such as
BALANCE, EQUALIZER or AVL(option), use the SOUND menu
(page11).
FAVOURITE Format
FORMAT SELECTION
This contains the users preferred format setting. In order to enter new
The following picture formats are
settings, proceed as follows:
AUTO setting :
available:
- Navigate the list of available formats with the ZOOM button (A15) until
FAVOURITE is selected.
If picture format signalling data is
received, then the most appropriate
ZOOM format will be automatically
selected. In the absence of this data, the
default ZOOM format will be selected(see
page 13, ZOOM AUTO function under
FEATURES MENU).
AUTO> 4:3 > 14:9 > ZOOM 14:9 > ZOOM
16:9 > FULL SCREEN > PANORAMA >
FAVOURITE > AUTO.
- While the selection FAVOURITE is active on the screen, the format can
be manipulated by use of the CURSOR LEFT (A7), RIGHT (A20) buttons
(to change the horizontal size) and the CURSOR UP (A6) or DOWN (A21)
buttons (to change the vertical size).
- The controls CURSOR RIGHT (A20) and CURSOR UP (A6) increase the size.
- The controls CURSOR LEFT (A20) and CURSOR DOWN (A6) decrease the size.
- The new settings are automatically memorized in the FAVOURITE format.
If the OSD status display FAVOURITE is at any time lost (timeout is 3-4
seconds after any previous use of the CURSOR keys), then a single touch
of the ZOOM button (A15) is necessary before adjustment can be resumed.
Otherwise, the preferred mode of the user
can be forced by repeated pressing of the
remote control ZOOM button (A15):
8
9
MENUS LANGUAGE SELECTION, CHILD LOCK, CLOCK
(For operating instructions, see page 10, HOW TO USE THE SUB-MENUS)
SETTING, WAKE UP, NOISE REDUCTION
These functions are available in the Features menu (see description page 14).
standby mode.
PICTURE MENU
- Select and adjust the level of each function : BRIGHTNESS, CONTRAST,
COLOUR, SHARPNESS, TINT (if available).
- The above modified values are automatically stored in FAVOURITE mode.
- NOISE REDUCTION feature has 4 levels according to your preference.
- The OK (A18) or NORMAL button will select the picture presets FAVOURITE,
NORMAL I, NORMAL II. The currently selected preset is displayed in the
menu header.
CHILD LOCK
This function only allows the TV to be turned on using the remote
control. Once the user has set this CHILD LOCK to ON or OFF, it will
remain in this condition until the user changes it again.
Alternatively, the user can enter the time manually using the CLOCK
function. However, if this is done the clock will not be periodically
updated as would happen if the time is set automatically. We
recommend that the user choose (if available) a CLOCK PROG
which allows the time to be updated automatically.
WAKE UP
It is necessary to have set the clock (either manually or
automatically) in order to be able to use this function. If the clock is
not set (--:-- is shown) then the WAKE TIME and WAKE PROG. will
not be selectable.
The default setting for WAKE TIME is in the "OFF" position. After
each use (the TV turns on according to the previous setting) the
WAKE TIME will be returned to the "OFF" position, conserving
always the last time setting entered ready for re-use.
This function also operate, when “CHILD LOCK ON” is selected.
- The FAVOURITE preset contains the settings that you last entered.
DEFAULT ZOOM CONTROL
If the ZOOM control is set to AUTO (A15, see page 9, FORMAT
SELECTION), then the picture format presented is controlled by the
received picture format signalling data embedded in the
transmission. In the absence of this signalling data (as can often be
the case) a default format must be used. This default format can be
selected by the ZOOM AUTO function.
If the NTSC standard is detected (eg from VHS player connected to AV1), then
TINT will available. Otherwise TINT will be displayed, but not selectable.
LANGUAGE
This can be changed at any time by the user in the LANGUAGE
menu (accessed via the FEATURES menu).
SOUND MENU
CLOCK SETTING
The TV will automatically attempt to set the clock when powered on
(with the MAIN POWER button). It takes as reference information
embedded in the teletext signal of the channel defined by CLOCK
PROG. Therefore, automatic clock setting is only possible if teletext
is available on this channel.
If no time is captured automatically (the clock will show - - : - -), then
the TV will try again to set the clock whenever turning on from
(For operating instructions, see page 10,HOW TO USE THE SUB-MENUS)
MENUS DESCRIPTION
MAIN MENU
All menus are removed within 25 seconds if you don't press any button.
Press the remote control MENU button (A19) to display the main menu.
Then, you have the choice between several sub-menus:
- Select VOLUME function to adjust the volume level.
- Select BALANCE function to adjust sound balance between the left and right speakers. If the indicator is highlighted in red, then the central balance
position has been found.
If you want to Exit the main menu, press the MENU button (A19) a
second time.
- To select one of the sub-menus, use the remote control CURSOR UP
(A6), DOWN (A21) buttons.
- To enter the selected sub-menu, press the remote control OK button
(A18).
- Use the EQUALIZER function to select the sound presets MUSIC, SPEECH, NORMAL, FAVOURITE by use of the CURSOR LEFT (A7), RIGHT
(A20) buttons. The FAVOURITE preset contains the settings that you last entered into the EQUALIZER menu.
- The OK button (A18) will enter the EQUALIZER menu, and allow you to change the FAVOURITE settings.
- Automatic Volume Level (AVL, Option) feature has 4 levels according to your preference. This feature corrects for large volume level changes, such
as occur when passing from a movie to advertisements. The AVL solves this problem by equalizing the volume level, over a SHORT MEDIUM or
LONG period (referring to the time constant over which the equalizing effect lasts).
Remark: In AV mode the INSTALL menu is not available, and will not be selectable.
HOW TO USE THE SUB-MENUS
The sub-menus referred to here are: PICTURE, SOUND, INSTALL, FEATURES.
EQUALIZER MENU
- Adjust the function using :
- Select the equalizer band by use of the CURSOR LEFT (A7) or RIGHT
(A20) buttons.
- Adjust the level of each of the 5 equalizer bands, 120Hz, 500Hz, 1500Hz,
5000Hz, 10000Hz, by use of the CURSOR UP (A6) and DOWN (A21)
buttons.
- The above modified values are automatically stored in FAVOURITE
mode.
- The OK button (A18) will select the picture presets MUSIC, SPEECH,
NORMAL, FAVOURITE. The currently selected preset is displayed in the
menu header.
- The FAVOURITE preset always contains the settings that you last
entered.
- Select the desired
Position by using the
remote control
CURSOR UP (A6) or
DOWN (A21) buttons.
- The remote control
CURSOR LEFT (A7) or
RIGHT (A20) buttons if you
want to modify the function
value
- The remote control
NUMBER 0...9
buttons (A3) to enter
directly new data.
- Store (if needed) by
pressing the remote
control OK button
(A18).
- Then Exit to main menu
by pressing the MENU
button (A19).
10
11
INSTALL MENU
(For operating instructions, see page 9, HOW TO USE THE SUB-MENUS)
Channel order changing
Channel skipping
Channel deleting
- Select the program to move using the
remote control CURSOR UP (A6) / DOWN
(A21) buttons.
- You can select skip "YES" or
"NO" using the remote control
RED "Skip" button (A11). A
program with skip "YES"
doesn't appear on screen
when changing channels with
the PROGRAM UP (A6) /
DOWN (A21) buttons.
- Select the program to delete using
the remote control CURSOR UP
(A6) / DOWN (A21) buttons.
- Press the remote control YELLOW
"Delete" button (A26). The deleted
program is moved to program
number 99 with skip changed to
"YES". The existing 99 program is
moved to program number 98 and
so on.
Automatic tuning system
Program list edition
TV system modification
Channel number
Country
- Press the remote control GREEN "Move"
button (A12): the program line background
is highlighted in orange, and can be moved
to another position using the remote control
CURSOR UP (A6)/ DOWN (A21) buttons.
- When the desired position is reached,
confirm the new position pressing the
remote control GREEN "Confirm" button
(A12). Then the program line background
will return again to gray.
TV system
Channel number
Channel Frequency
Channel name
Program number
Program storage number
Channel Frequency
Channel name
Program number
Program storage number
Automatic Tuning System
ATSS = Automatic Tuning and Sorting System. To start the ATSS function:
- Select "ATSS" function.
- Adjust to the required country.
- Press and hold the OK button (A18) to start the automatic tuning.
The ATSS function has started when the phrase "Please Wait!" appears (in red characters)
in the help instructions box, below the Install menu.
When the ATSS function is finished, the stored programs are displayed on screen using
Edit menu presentation (to Exit tuning before automatic tuning finished, press the remote
control MENU button (A19))
Warning: This television has been factory
pretuned to channels 2, 7, 9, 10 and
28. If the auto search function is
activated, these preset channels will
be deleted and new channels tuned
to 1, 2, 3 ETC..
Manual Channel Tuning
Choose a starting point
Channel searching
Enter station name
- Select with "Program" the
program from which you want
to start manual tuning. Then the
channel number, the frequency,
the name and the program
- Select the "Frequency" function.
- Press, and hold for more than 1
second, the remote control
CURSOR RIGHT (A20) [LEFT
(A7)] buttons to start up [down]
manual tuning.
- Searching will stop automatically at
the next channel found (to stop
tuning, press the remote control
MENU button (A19)).
It is possible to enter your own choice of name for
each program. You can change an existing name,
or enter a name where none exists. If none exists
"- - - - - - -" will be shown in the Install menu, and
program status display ( see the section
PROGRAM STATUS DISPLAY on page 8).
- Select the "NAME" function.
- Select one of the 7 character positions by using
the remote control CURSOR RIGHT (A20) /
LEFT (A7) buttons to move the cursor.
Program List Edition
This allows you to easily manipulate the existing program order allocation, by using Edit menu functions described below.
number of this program are
displayed in the Install menu.
Program number
Station name
-
Then use the CURSOR UP (A6) /DOWN (A21) buttons
to select the desired character for that position.
Note: You can directly locate a
program by entering the data
into the "channel" or the
"frequency" function.
- Repeat the last two instructions for other
positions, as desired.
Channel number
- Once the name has been entered, press the OK
button (A18) to store it. The name will be
memorised to the program number currently
shown on the "Store To" line. The "Store To"
program number will highlight in red briefly.
Skip code
: Program skipped
Nothing : Program not skipped
To enter the EDIT menu: From Install menu, select "Edit", and press the OK button
(A18): the EDIT menu appears.
Perform fine tuning
Store program in memory
- If you are unable to get a good
picture or reasonable quality sound
due to poor reception, it is possible
to perform fine tuning.
- Select the "frequency" function.
- Press, for less than 1 second, the
remote control CURSOR
RIGHT(A20) [LEFT(A7)] buttons to
perform up [down] fine tuning in
steps of 0.05MHz (50 kHz).
- Select the "store to" function
The current program being displayed is highlighted in blue (on the central line). In the
above case, the current program is PR00. The 3 previous, and 3 following programs,
are always displayed. Any program from 00 to 99 can be selected, by using the
remote control CURSOR UP (A6) / DOWN (A21) buttons.
- Enter the program number you want to store
to either by using the remote control
CURSOR RIGHT (A20) / LEFT (A7) buttons,
or directly by using the remote control
NUMBER 0...9 buttons (A3).
- Press the OK button (A18) to confirm.
Remarks: this function can also be used if you
want to copy a program already memorised to
another program number.
The memorised programs can be modified as follows :
12
13
TELETEXT
FEATURES MENU
See section near the end of section DAILY USE for a more detailed explanation of these functions.
(For operating instructions see page 10, HOW TO USE THE SUB-MENUS)
ENTERING/LEAVING TELETEXT MODE
- Select the desired program with teletext.
- Press the remote control TELETEXT ( ) button (A22) to select teletext
mode. The initial page (or the last page viewed if you have already used
teletext in the present channel) appears.
1. Adjust this value ON or OFF.
- In stand-by mode, the stand-by indicator flashes red and
green to indicate the CHILD LOCK is set.
- The front panel TV buttons (B7, B8, B9) become inactive
and the TV will only respond to the remote control.
- Picture And Teletext (PAT) function : If you want to watch the TV program
and use teletext at the same time, press the TELETEXT button (A22)
again. Teletext will be displayed on the left hand part of the screen, and
the whole TV picture will be compressed into right hand part of the
screen.
1. When switched to ON:
Prevents the use of the TV set without remote control
2. Wake up function
2. - Switch the WAKE UP function OFF or ’ON’ (the time will be
shown e.g. 07:15) with the remote control CURSOR LEFT
(A7) /RIGHT (A20) buttons
- Enter the wake up time with the remote control 0...9
NUMBER (A3) buttons
This function is only selectable when the clock is set.
The TV set turns on from stand-by at the WAKE TIME
with the programme entered on the WAKE PROG. line.
Put the TV set on stand-by with the remote control
- To return to TV mode, press again the TELETEXT ( ) button (A22).
3. Shared with WAKE TIME.
3. Adjust TV turn-on program number
4. TV clock setting
4. Adjust TV clock. Clock will start at 0 seconds upon entry
of the 4th figure.
The prog. no. which can be used to automatically seize the
time at turn on can be entered here.
This function allows user to enter the time manually.
Note : If you turn off the set with the main power button,
the clock setting is lost. An automatic attempt is made to
set the clock again at power on.
PAGE SELECTION
5. The selection of this format, will be used as the default of the
TV, when it starts to "ON" condition.
5. This function is only selectable, when the ZOOM button (A15) at
the remote is selecting AUTO.
- You can directly enter the 3 figure page number by using the remote control NUMBER 0...9 buttons (A3).
- You can sequentially select teletext pages by pressing the remote control PAGE UP (A6) / DOWN (A21) buttons.
6. The currently selected LANGUAGE is displayed.
Press the OK button (A18) to access the menu and change
the selection.
6. LANGUAGE menu entry.
- At the base of the screen a menu of coloured page links is available, showing either page numbers or a title with headings (eg Sport,
News) in RED, GREEN, YELLOW or CYAN colour. These pages can be accessed by using the corresponding coloured buttons (A11,
A12, A26, A25) on the remote control.
Once a request is made, the page number is shown in the extreme top left corner of the screen. If the requested page is not
immediately available the rolling header will be active until the page arrives.
LANGUAGE MENU
- Select the preferred LANGUAGE by use of the CURSOR LEFT (A7),
RIGHT (A20) buttons, and the CURSOR UP (A6) or DOWN (A21) buttons.
- Press the OK button (A18) to confirm the selection (the choice will be
highlighted in red).
Note : The languages shown are subject to modification without prior notice.
14
15
TELETEXT FORMAT PICTURE & SOUND CONTROL
Doubling character height
Repeatedly pressing the HEIGHT button
order:
(A23) doubles the character height in the following
Upper half of the page (UP) > Lower half of the page (DOWN) > Return to normal height.
If the page is in UP or DOWN mode, then normal size is automatically set if :
- A new page request is made (e.g. CYAN, INDEX or PAGE UP/DOWN).
- CANCEL mode (A8) function is used.
USEFUL TELETEXT FUNCTIONS
INDEX
button (A18): Allows you to return directly to the
PAGE HOLD button
subpage can be held on the screen by pressing the
PAGE HOLD button.
(A9): Any teletext page or
- VOLUME menu is activated the with the MENU button (A19).
initial teletext page.
Note : The menu at the base of the screen is always visible
- The page number shown in the extreme top left corner
of the screen will become red.
- Press the HOLD button again to cancel hold mode (the
page number will return to white).
Volume and brightness control in teletext mode
VOLUME ( and sound MUTE), BRIGHTNESS and CONTRAST controls are all possible in teletext. The BRIGHTNESS and CONTRAST
controls are dedicated to the teletext display.
- Access the VOLUME control by pressing the MENU button (A19) in teletext mode. A barograph will appear in the lower part of the screen
(as in TV mode). If MUTE is active a mute icon is also shown.
- A second press on the MENU button (A19) will access the BRIGHTNESS control, and a third press the CONTRAST control.
- The active bargraph will timeout after 3-4 seconds (as in TV mode VOLUME control) or by pressing on the MENU button (A19) a fourth
time (after CONTRAST control)
- Each control can be adjusted by using the remote control CURSOR RIGHT (A20) / LEFT (A7) buttons.
- Mute can always be activated by pressing the SOUND MUTE button (A2).
- Any change to the VOLUME level will cancel the SOUND MUTE.
SUBPAGE button
(A10): Allows you to request a specific subpage:
- Press the SUBPAGE button (A10). At the base of the screen a
SUBPAGE menu will appear. This has a red subpage minus
link, a green subpage plus link, plus a white background
showing (e.g. for page 110), 110 / 0001. This is ready to
accept the subpage number.
- Enter directly the subpage number you want with the remote
control NUMBER 0...9 buttons (A3): for example to request the
2nd subpage, type 0002.
- Alternatively, use the red subpage minus link or the green
subpage plus link.
- The subpage number entered is shown at the base of the screen.
- If the requested page is not immediately available the rolling
header will be active until the page arrives. Warning: If the
subpage is not available (does not exist), then the header will
roll continuously and no new page will be found.
- To exit subpage mode, press the SUBPAGE button (A10) again.
Note : Teletext specification allows for subpage numbers 0000
to 3979 (the first figure is limited to the range 0..3, and
the third figure 0..7).
WATCHING TV WHILE PAGE SEARCHING
The CANCEL function can be used to make the teletext page transparent, thus revealing
the TV picture:
- To enter cancel mode, press the CANCEL
button (A8) while in teletext mode. The TV
program will reappear on the screen, while only the teletext page number remains at the
top and left corner of the screen.
REVEAL
button (A24): Press this button to reveal,
- You can enter a new page number in this mode only by using the remote control
on certain pages, hidden information such as the
answer to a quiz.
- Press the button again to hide the information.
NUMBER 0...9 buttons (A3), or with the INDEX
button (A18).
- If a page has been requested, but has not yet arrived, "???" flashing characters will be
displayed until the page arrives. Otherwise, the same characters will be displayed
without flashing until the next arrival of the page in the transmission cycle. Once arrived
the page number will be displayed.
- The teletext page can be made visible again by pressing the CANCEL
- It should be noted that the TV program cannot be changed while in cancel mode.
button (A8).
WATCHING TV WITH TELETEXT SUBTITLES
If the actual teletext page is a news flash or subtitle page, then most of the TV picture becomes visible. In this situation the ZOOM
format chosen in TV mode is reactivated, where possible.
This is particularly useful while watching a program with the teletext subtitles. Only formats which do not allow the full height of the
TV picture to be seen are not possible in teletext mode, as these would not allow all teletext lines to be displayed.
Therefore only the formats ZOOM 14:9 AND ZOOM 16:9 (available with wide screen TV models) cannot be preserved with teletext
subtitles. In this situation the default format FULL SCREEN (equal to 16:9) will be used.
For FAVOURITE format, FULL SCREEN will also be used only if the vertical size chosen is greater than 100%.
Note : A 16:9 or 14:9 format can be realised by keeping a 100% vertical size, but reducing the horizontal size, thus allowing teletext
subtitles to be used over a picture that has no distortion.
16
17
TROUBLESHOOTING
SPECIFICATION
Color system
Sound system
TV Standard
PAL, NTSC 3.58 4.43(AV)
/
B/G, H, M(AV)
BBefore Asking for Service:
Rated voltage
AC 240V~, 50Hz
Neither picture nor sound:
Picture is OK, but no
sound:
Sound is OK, but no
color:
Overlapped Picture
Image:
Power on
97W
Power consumption
•Is power cord plugged in?
•Check if “Volume Down” is
pressed.
•Check if the “Volume Control”
is set to the minimum position.
•Check if the “Color Control” is
set to the minimum position.
•Check if the program on air is
in color, or in black and white.
•Check if the antenna
installation and its connection
are OK.
•Check if the antenna direction
is correct.
•Check if the “Frequency”
function is set up correctly.
Stand-by
3W Under
Sound Output Power
Channel Coverage
7W X 7W(10% THD. 60% MOD. At 1kHz)
BAND I : CH0 - CH4 [CH0(46.25Mhz), CH2(64.25Mhz)]
BAND II : CH5 - CH12 [CH7(182.25Mhz), CH10(196.25Mhz)
CH10(209.25Mhz)]
CABLE BAND : S1’ - S3’, S1 - S20
HYPER BAND : S21 - S41
VHF
UHF
•Adjust the volume with
“Volume Up” button.
•Check the antenna again.
•Check by turning on other
channel programs.
•Refer to the color section
again, and readjust the color.
•Direct the antenna toward the
broadcasting station.
•Adjust the “Frequency”
function.
•Press power button on the front of
TV.
•If the red power light is on, press
the remote control power button.
Red power light should be green.
BAND IV, V : CH21 - CH69 [CH28(527.25Mhz)]
Frequency Synthesizer Tuning System
Tuning System
Channel Indication
On Screen Display
100 Programs
Program Selection
Aux. Terminal
AV1 (Rear): RCA Jack
AV2 (Front): RCA Jack, S-VHS(Front): S-Video
Input
Output Monitor out (Rear): RCA Jack
r u l s o t n
T o b e h o i g :
RD-D110(Required two 1.5V battries type with AAA size)
Remote Control Unit.
Dimension
Picture tube
Weight
840(W) x 512(H) x 499.5(D) mm
28" WIDE FLAT TYPE
39kg
Picture has “Snow”:
Stripes on picture:
Bad stereo sound:
Operation disorder of Remote
Control:
•Check if the antenna is
damaged or its connection is all
right.
•Check if there is an interference
by other electronic devices, such
as radio, telephone, etc.
•Long distance from the station
or other radio waves could
cause bad sound reception.
•Check if the batteries are low.
•Check “Remote Control Sensor”
window.
•Check if there is an interference
from car traffic or neon signs.
•Correct the antenna faults or
replace the connection cable.
•Keep magnetic or electronic
devices away from the set.
•Shift the mode into “Mono” by
using “MODE” button.
•Get rid of objects blocking the
TV sensor and Remote
Control
•Replace batteries or check if
the electrodes are fitted
properly in the compartment.
18
19
NEC Australia Pty. Ltd.
ABN 86 001 217 527
Home Electronics Group
NEC Service Centres
PH: 131-632
NEW South Wales
Sydney
Newcastle
184 Milperra Rd, Revesby 2212
120 Parry Street, Newcastle West 2302
(02)9780 8688
(02)4926 2466
Victoria
Melbourne
Unit 1/6 Garden Road, Clayton 3168
(03)8562 6245
Queensland
Brisbane
Southport
Unit 4/305 Montague Road, WEST END 4101
Shop 1, 48 Ferry Road, Southport 4215
(07)3840 5858
(07)5591 3670
South Adelaide
Adelaide
84A Richmond Rd, Keswick, 5053
45 Sarich Court, Osborne Park 6017
(08)8375 5710
(08)9445 5901
Western Australia
Perth
For Service in outer areas, please contact your NEC retailer for the address of the nearest
Authorised NEC Service Centre.
NEC Australia Pty. Ltd.
Home Electronics Group
244 Beecroft Road EPPING 2121
Tel: 131 632
Fax: (02)9877 2353
|