User’s Guide
For K301 / K302 / K303 / K304 / K305
DECT 6.0 Cordless Phones
Warning
Use only the power adapters and telephone line cord
provided in the box.
This User’s Guide provides you with all the information you need to get
the most from your phone.
Before you make your first call you will need to set up your phone.
Follow the simple instructions in 'Getting Started', on the next few
pages.
IMPORTANT
Only use the telephone line cord supplied.
This equipment is not designed for making emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency services.
Got everything?
•
•
•
•
•
•
•
•
Handset
Base
User’s guide
Quick start guide
Battery door
NiMH rechargeable battery pack
Power adapter
Telephone line cord
In multihandset packs, you will find one or more additional handsets, chargers with power adapter units,
additional rechargeable battery packs and battery doors.
1. Getting started ................................................6
2. Getting to know your phone..........................9
3. Using the phone............................................15
4. Phonebook....................................................19
4.1 View an Entry .....................................................19
4.2 Add an Entry.......................................................19
4.3 Edit an Entry.......................................................20
4.4 Delete an Entry...................................................20
4.5 Delete all Entries ................................................20
4.6 View Phonebook Capacity .................................20
4.7 Store a Phonebook Entry as a One Touch
3.1 Calls................................................................... 15
3.1.1 Make a call ............................................ 15
3.1.2 Predial ................................................... 15
3.1.3 Dial one touch numbers 1 to 9 .............. 15
3.1.4 Storing a number in memory ................. 15
3.1.5 Dialing a number from memory ............. 15
3.1.6 Call from the phonebook ....................... 15
3.1.7 Call from the calls list ............................ 16
3.1.8 Call from the redial list .......................... 16
3.1.9 Answer a call ......................................... 16
3.1.10 Audio boost feature ............................... 17
3.1.11 Adjust volume ....................................... 17
3.1.12 Mute ...................................................... 17
3.1.13 End a call .............................................. 17
3.2 Intercom............................................................. 17
3.2.1 Call another handset ............................. 17
3.2.2 Transfer an external call to another
Number...............................................................20
4.8 Change the Phonebook Entry in a One Touch
Number...............................................................21
4.9 Delete a One Touch Number .............................21
5. Caller ID.........................................................21
5.1 Calls List.............................................................21
5.1.1 View the calls list ...................................22
5.1.2 Save a number from the calls list to the
phonebook .............................................22
5.1.3 Delete a calls list entry ...........................22
5.1.4 Delete entire calls list .............................23
5.2 Redial .................................................................23
5.2.1 View the redial list ..................................23
5.2.2 Copy a redial number to the phonebook ..23
5.2.3 Delete a redial list entry .........................23
5.2.4 Delete entire redial list ...........................23
handset ................................................. 18
3.2.3 Three-party conference call .................. 18
3.3 Voicemail........................................................... 18
3.3.1 Clear voice mail indication .................... 18
4
6. Personal Settings.........................................24
6.1 Set Date & Time.................................................24
6.2 Handset Tones...................................................24
6.2.1 Set the ringer tone .................................24
6.2.2 Set the ringer volume ............................24
6.2.3 Key tones on/off .....................................24
6.2.4 Battery low tone on/off ...........................25
6.2.5 No coverage tone on/off ........................25
6.3 Equalizer ............................................................25
6.4 Handset Name ...................................................25
6.5 Set the Display Language ..................................25
6.6 Set the LCD Contrast .........................................26
6.7 Auto Talk On/Off.................................................26
6.8 Registration ........................................................26
7. Advanced Settings......................................27
7.1 Set the Dial Mode...............................................27
7.2 Set the Flash Time .............................................27
7.3 Set the Area Code..............................................27
7.4 Reset All Settings...............................................27
8. Default Settings............................................28
9. Help................................................................28
10. General Information .....................................30
5
HANDSET RANGE
1. Getting started
WARNING
Do not place your phone in the bathroom or other humid
areas.
Optimal range is reached when there are no other electrical
appliances working within the range area. Any obstruction
between the base and handset will also reduce the range
significantly.
SIGNAL STRENGTH
Location
When out of range of the base, the screen shows SEARCHING...
If you are on a call, the line will hang up. Move back within in
range. The handset will automatically re-connect to the base.
.
When choosing a location for your new phone, here are
some important guidelines you should consider:
•
•
Avoid sources of noise and heat, such as motors,
fluorescent lighting, microwave ovens, heating
appliances and direct sunlight.
Avoid areas of excessive dust, moisture and low
temperature.
Avoid other cordless telephones or personal computers.
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the
jack is specifically designed for wet locations.
Never touch non-insulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
Setting up
IMPORTANT
The base must be plugged into the electrical outlet at all
times. Do not connect the telephone line cord into the wall
jack until the handset is fully charged. Only use the power
adapter and telephone line cord supplied with the product.
•
•
•
WHICH POWER ADAPTER
The power adapter with the smaller pin is for the base unit
and the power adapter with the bigger pin is for the charger
unit (for multi-pack only).
•
•
Use caution when installing or modifying telephone lines.
6
Getting started
Connecting the base
Install and charge the handset battery pack
1. Slide out the battery compartment cover.
2. Place the supplied rechargeable battery pack in the
battery compartment, with the battery connector
plugged in, as shown.
3. Slide the battery compartment cover back.
4. Put the handset on the base to charge for at least 24
hours. When the handset is fully charged the will
indicate that it is fully charged.
1. Plug the power adapter with smaller pin plug &
telephone line cord into the base. Power adapter with
bigger pin plug is for charger (for multi-pack only).
2. Plug the other end of the power adapter & telephone
line cord into the wall jack.
3. Always use the telephone line cord provided in the box.
4. Use only the provided power adapter.
5. Use only the rechargeable battery pack provided.
Getting started
7
BATTERY LOW WARNING
If the flashes in the display, you will need to recharge the
handset before you can use it again. During charging, the
will scroll in the display.
BATTERY PERFORMANCE
In ideal conditions, a fully charged battery pack should give
up to 12 hours talk time and up to 180 hours standby time on
a single charge.
Note that new battery packs do not reach full capacity until
they have been in normal use for several days.
To keep your battery packs in the best condition, leave the
handset off the base for a few hours at a time.
Running the battery packs all the way down at least once a
week will help them last as long as possible.
The charge capacity of rechargeable battery packs will
reduce with time as they wear out, giving the handset less
talk/standby time. Eventually they will need to be replaced.
After charging your handset for the first time, subsequent
charging time is about 6-8 hours a day. The battery pack and
handset may become warm during charging. This is normal.
8
Getting started
1
2
Menu/ Select
2. Getting to know your phone
Overview of your handset
In idle mode: press to access menu list.
In menu/editing mode: press to confirm and save the settings.
During a call: press to hold a call.
In calls list entry: press to save the entry to the phonebook.
In phonebook entry: press to go to phonebook editing mode.
Scroll up/ Volume up
In menu mode: press to scroll up.
In editing mode: press to move cursor to the left.
During a call: press to increase volume.
Calls list/phonebook/redial list entry: press to scroll up the list.
3
4
Right/ Calls list
In idle mode/during a call: press to access calls list.
In editing mode: press to move the cursor to the right.
Scroll down/ Volume down/ Redial list
In idle/pre-dial mode: press to access redial list.
In menu mode: press to scroll down.
In editing mode: press to move cursor to the right.
During a call: press to decrease volume.
Calls list/phonebook/redial list entry: press to scroll down the list.
5
Talk off/ Back
In menu/editing mode/phonebook entry: press to exit to
previous level.
In pre-dial mode/calls list/redial list entry mode: press to exit
to idle.
During a call: press to end a call.
Getting to know your phone
9
During a call: press to make a flash.
During ringing: press to answer a call.
6
7
Alphanumeric keypad
In idle/pre-dial/editing mode/during a call: press to enter
characters/numbers. Long press to activate speed dial.
#/ Pause/ ABC/ Format
13 Left/ Phonebook
In idle mode/during a call: press to access the phonebook.
In editing mode: press to move the cursor to the left.
In idle/pre-dial/number editing mode/during a call: press to
insert a "#", press and hold to insert a pause.
In name editing mode: toggle ABC/Abc/abc.
In calls list entry: press to toggle the Caller ID display format
between 7, 8, 10 and 11 digits.
14 Mute/ Clear
In pre-dial/editing mode: press to delete one character/digit.
Long press to delete all characters/digits.
During a call: press to mute/unmute the call.
In calls list/phonebook entry: press to delete the entry.
8
9
Intercom
In idle mode/during a call: press to initiate an intercom call.
Microphone
15 M1/ M2/ M3
Memory keys.
10 Speaker
In idle mode: press to dial the number stored into the
memory key.
Press and hold to add or edit the number stored into the
memory key.
In idle/menu/pre-dial mode/during a call: press to turn on/off
the speakerphone.
Call List/phonebook/redial list entry: press to make a call
with speakerphone.
16 Earpiece
17 LED Indicator
During ringing: press to answer a call with speakerphone.
11 */ Tone
Steadily on when audio boost is turned on.
Flashes during ringing.
In idle/pre-dial/editing mode: press to insert a "*".
During a call: press to switch from pulse to tone dialing
temporarily if pulse mode was selected before. After the call
has ended, the dial mode will change back to pulse.
12 Talk on/ Flash
18 Volume +/ -
During a call: press to increase or decrease the earpiece
volume.
19 Audio Boost
In idle/menu/pre-dial mode: press to make a call.
Call List/phonebook/redial list entry: press to make a call to
the selected entry.
During a call: press to turn on/off the audio boost feature.
10
Getting to know your phone
On when ringer volume is turned off.
Handset LCD display
On when there is new voice mail not yet listened to.
Off when new voice mail has been listened to.
On when a call is muted.
Full battery power level.
2/3 battery power level.
1/3 battery power level.
Display icons
Flashes when low battery level is detected, needs
charging.
On when the line is in use.
Flashes when there is an incoming call.
Animation in cycle. Battery is charging.
On when speakerphone is turned on.
Indicates when new call is received.
Off when new call has been viewed.
Getting to know your phone
11
Paging is a useful way of finding lost handsets.
Overview of the base
1. Press v on the base.
-
All handsets ring.
2. To stop the paging call, press v again, or place the
handset on the cradle or press any key on the handset.
Navigating the menus
1. Press P.
2. Press , to scroll through the menu.
3. Press P to open a sub-menu or validate an option.
Press > to go back to previous menu level or cancel an
action.
1
FIND
If you do not press any button on the handset for 30 seconds
the display will automatically return to standby. It will also
return to standby when the handset is placed on the base or
charger.
Press to find/page all registered handsets.
12
Getting to know your phone
Menu map
MAIN MENU
SUB MENU
DATE & TIME
PHONEBOOK
SETUP HS
SETUP BS
RESET SETTINGS
YEAR
DATE
VIEW
RINGER TONE
RINGER VOLUME
EQUALIZER
DIAL MODE
FLASH TIME
AREA CODE
CLR VOICE MAIL
ALL SETTINGS
ADD
EDIT
DELETE
DELETE ALL
PB CAPACITY
SPEED DIAL
KEY TONE
LOW BATT TONE
OUT RANGE TONE
HANDSET NAME
LANGUAGE
LCD CONTRAST
AUTO TALK
REGISTRATION
Getting to know your phone
13
Character map
Uppercase
Lowercase
Key
1
Character versus key press number
Key
Character versus key press number
space
1
B
E
H
K
N
Q
U
X
#
C
F
I
‘
,
-
.
&
1
2
3
4
5
6
7
8
9
0
*
space
1
b
e
h
k
n
q
u
x
#
c
f
‘
,
-
.
&
2
A
D
G
J
2
3
4
5
6
S
8
Z
a
d
g
j
2
3
4
5
6
s
8
z
3
4
i
5
L
l
6
M
P
T
O
R
V
Y
m
p
t
o
r
7
7
9
(
7
9
(
8
v
y
9
W
0
w
0
*
0
*
*
?
!
/
)
@
?
!
/
)
@
#
Toggle the letter case - ABC / Abc / abc
#
Toggle the letter case - ABC / Abc / abc
14
Getting to know your phone
3. Press the P button.
3. Using the phone
OR
1. In idle, press and hold A/B/C, enter the number.
If there is number already existed, the number will be
displayed and you can edit it if necessary.
3.1
Calls
3.1.1
Make a call
1. Press < or J.
2. Press P to save.
2. Dial the phone number.
A confirmation tone will be emitted when the number saved
successfully.
3.1.2
Predial
1. Enter the phone number (maximum 32 digits). If you
3.1.5
Dialing a number from memory
make a mistake, press M to delete a digit.
In idle, press A/B/C to dial the number pre-stored
2. Press < or J to dial the phone number entered.
into the keys respectively.
3.1.3
Dial one touch numbers 1 to 9
OR
1. Press and hold a key from 1 to 9until the number is
When you get a dial tone by pressing <or J, press the
displayed and dialed.
A/B/C to dial the priority number.
NOTE
You need to set the direct access number first.
You need to set the one touch number first.
-
If no number is stored, you hear a beep and display
-
If no number is stored, you hear a double beep.
shows List Empty
.
3.1.4
Storing a number in memory
3.1.6
Call from the phonebook
1. Dial the number to be stored at idle state.
2. Press and hold specific memory location buttons A/
B/C.
1. Press .. The first entry in the phonebook is displayed.
2. Scroll , to the entry you want.
Using the phone
15
3. Press < or J to dial the number.
2. Scroll , to the entry you want.
TIPS
3. Press < or J to dial the number.
Instead of scrolling to browse the phonebook entries, press
the numeric key corresponding to the first letter of the entry
you wish to locate. For example, pressing 2 will show the
entries starting with A. Pressing 2 again will show the
entries starting with B, etc.
3.1.9
Answer a call
1. When the phone rings and
<or press Jto answer the call via the loudspeaker.
WARNING
flashes in the display, press
When the phone is ringing, avoid holding the earpiece too
close to your ear as it may damage your hearing. Handsfree
activation can suddenly increase the volume in the earpiece
to a very high level. Make sure the handset is not too close
to your ear.
3.1.7
Call from the calls list
NOTE
You need to subscribe to your network's Caller ID service to
be able to see the caller's number in the calls list. See
section “5. Caller ID” for more details.
TIPS
If Auto Talk mode (see Section 6.7 for more details) is on,
simply lift up the handset from its base to answer the call.
The default setting is Off.
1. Press /. The first entry in the call list is displayed.
2. Scroll , to the entry you want.
3. Press < or J to dial the number.
NOTE
3.1.8
Call from the redial list
An incoming call has priority over other events. Whenever
there is an incoming call, other operations in progress such
as phone settings, menu navigation, etc. will be ended.
The last five numbers called are saved and can be redialed
later.
1. Press -. The first entry in the redial list is displayed.
16
Using the phone
1. During a call, press M.
The microphone is muted.
3.1.10 Audio boost feature
The audio boost feature allows you to amplify the handset
earpiece volume to compensate for the ear's limited sensitivity.
-
2. Press M again to turn the microphone back on.
1. To turn on the audio boost feature, press
at any
3.1.13 End a call
time during a call. The handset top indicator illuminates.
2. When the audio boost feature is activated, press
to increase or decrease the earpiece
volume within the specific frequency range set in
Equalizer. See section “6.3 Equalizer” for more details.
3. To turn off the audio boost feature and return the
1. During a call, press > or put the handset on the
cradle.
After you hang up, the duration of your call is displayed for
around 2 seconds.
3.2
Intercom
This feature is only available when there are at least 2
registered handsets. It allows you to make internal calls,
transfer external calls from one handset to another and use
the conference option.
earpiece volume back to normal, press
and the handset top indicator light turns off.
again
-
The audio boost feature will be turned off
automatically when the call is ended.
3.1.11 Adjust volume
1. During a call, press ,to adjust the loudspeaker volume.
Or press to adjust the earpiece volume.
3.2.1
1. Press I.
Call another handset
2. Press , to the handset you want to call.
3. Press P to call the handset.
-
The level is shown in the handset display, as VL1 up
to VL5.
TIPS
3.1.12 Mute
Mute the microphone so that you can talk to someone else
in the room without your caller hearing you.
You may enter the number of the handset (1 to 5) you want
to call.
Using the phone
17
4. Press > to hang up.
3. Press P to call the handset.
NOTE
TIPS
If the handset is not within the valid operation range, this
function may not be available.
You may enter the number of the handset (1 to 5) you want
to call.
4. When the other handset answers the intercom call,
press I to set up the conference call.
5. Press > to hang up.
3.2.2
1. During an external call, press I.
Your caller is put on hold.
Transfer an external call to another handset
-
2. Press , to the handset you want to call.
3.3
Voicemail
3. Press P to call the handset.
Voice Mail Waiting Indication
is an indication given to
TIPS
you when a new voice mail message is waiting on the
network service provider. This feature is available if you
have subscribed to the voicemail service from your network
service provider.
You may enter the number of the handset (1 to 5) you want
to call.
4. When the other handset answers by pressing < or
J, press > to transfer the call. If the other handset
does not answer, press I to talk to your caller again.
3.3.1
Clear voice mail indication
1. Press P and , to select RESET SETTINGS
2. Press P to select CLR VOICE MAIL
3. Press P to select YES
4. Press P to clear voice mail indication.
.
3.2.3
1. During an external call, press I.
Your caller is put on hold.
Three-party conference call
.
.
-
2. Press , to the handset you want to call.
18
Using the phone
If there are entries in the phonebook, press , to the entry
4. Phonebook
The handset phonebook can store up to 30 names and
numbers.
you want. Press P and , to select ADD.
3. Press P and enter the name.
4. Press P and enter the number.
5. Press P and , to select a melody.
6. Press P to save settings.
NOTE
Numbers can be up to 24 digits long and names up to 16
characters long. Entries are stored in alphabetical order.
NOTE
4.1
View an Entry
Cancel storing an entry by pressing > at any time during
1. Press ..
the process.
2. Press , to the entry you want.
Entering names
Use the alphanumeric keypad to enter names in the phonebook.
For instance to enter the name Paul
3. Press P to select VIEW
.
4. Press P to view the entry.
NOTE
P
A
U
L
Press 7 once
If the number is more than 15 digits, press # to view the
Press 2 once
next page of remaining digits.
Press 8 twice
Press 5 three times
4.2
Add an Entry
To enter a space, press 1.
1. Press ..
2. If the list is empty, LIST EMPTY is displayed. Press P to
Press M to delete a character or press and hold M to
select ADD
.
delete all characters.
Phonebook
19
Enter a pause
4.4
1. Press ..
2. Press , to the entry you want.
3. Press P and , to select DELETE
4. Press P to delete the entry.
Delete an Entry
If your phone is connected to a switchboard, you may need
to enter a pause in a stored number. This gives the
switchboard time to get an outside line. A pause is normally
stored after the switchboard access code (e.g. 9).
.
When storing a number, press and hold # and the display
shows
P
. You can then continue storing the phone number.
4.5
Delete all Entries
1. Press ..
4.3
Edit an Entry
2. Press P and , to select DELETE ALL
.
1. Press ..
3. Press P. DELETE ALL PH.BOOK RECORDS? is displayed.
2. Press , to the entry you want.
4. Press P to delete all the entries.
3. Press P and , to select EDIT
4. Press P and edit the name.
5. Press P and edit the number.
6. Press P and , to select a melody.
7. Press P to save the entry.
.
4.6
View Phonebook Capacity
1. Press ..
2. Press P and , to select PB CAPACITY
.
3. Press P.
NOTE
Press Mto delete a digit/character or press and hold M
4.7
Store a Phonebook Entry as a One
Touch Number
to delete all digits/characters.
1. Press ..
20
Phonebook
2. Press P and , to select SPEED DIAL
.
5. Caller ID
3. Press P and , to select the speed dial key 1 to 9.
4. Press P and , to the entry you want.
5. Press P to save.
If you have subscribed to Caller ID, and provided the identity
of the caller is not withheld, the number of the caller will be
displayed together with the date and time of the call (if
provided by the network).
4.8
Change the Phonebook Entry in a
One Touch Number
NOTE
•
•
•
If the telephone number is not available for incoming
calls, the handset will display UNAVAILABLE
If the incoming call is from a withheld telephone number,
the handset will display PRIVATE
Information about incoming calls will vary by country and
network operator. Some operators may charge a
subscription for their Caller ID service.
1. Follow steps 1 to 3 in “4.7 Store a Phonebook Entry as a
.
One Touch Number”.
2. Press P and the stored number is displayed.
.
3. Press P to select ADD
.
4. Press P and , to the entry you want.
5. Press P to save.
5.1
Calls List
4.9
Delete a One Touch Number
The calls list contains details of missed and received calls.
Details include the date and time of the call. Entries are
displayed in chronological order with the most recent call at
the top of the list.
1. Follow steps 1 to 3 in “4.7 Store a Phonebook Entry as a
One Touch Number”.
2. Press P and the stored number is displayed.
3. Press P and , to select DELETE
.
4. Press P to delete the stored number.
Caller ID
21
NOTE
331-3383
•
•
•
When the calls list is full, a new call replaces the oldest in
the list.
1-331-3383
888-331-3383
1-888-331-3383
User can choose the desired number format for local and
long distance numbers before dialing or saving it into the
phonebook.
The received and missed calls log holds details of up to
30 calls.
If you receive more than one call from the same number,
only the most recent call is kept in the calls list. When
you have missed calls (incoming calls that you haven't
•
The
icon is removed once the new call has been
answered) the
icon will be displayed in the display
viewed.
on all handsets registered to the base. If one handset is
used to view the calls log, the icon on the other handsets
remains on (For multi-pack use only).
5.1.2
Save a number from the calls list to the
phonebook
1. Press / to enter the calls list.
2. Press , to the entry you want.
3. Press P and enter the name.
4. Press P and edit the number.
5. Press P and , to select a melody.
6. Press P to save.
5.1.1
View the calls list
1. Press / to enter the calls list.
2. Scroll , through the calls list.
NOTE
•
When reviewing an entry from the calls list, press #
repeatedly to display the number in a different format.
For example, if a caller number is displayed as
888-331-3383, the various formats will be:
5.1.3
Delete a calls list entry
1. Press / to enter the calls list.
2. Press , to the entry you want.
22
Caller ID
3. Press M to delete the entry.
5.1.4 Delete entire calls list
5. Press P and edit the number.
6. Press P and , to select a melody.
7. Press P to save.
1. Press / to enter the calls list.
5.2.3
Delete a redial list entry
2. Press and hold M. DELETE ALL CALL LOG ENTRIES? is
displayed.
1. Press - to enter the redial list.
2. Press , to select the entry you want.
3. Press P to confirm and all entries are deleted.
3. Press M to delete the entry.
5.2
Redial
OR
Your phone lets you redial any of the last 5 numbers called.
Numbers can be up to 32 digits long.
3. Press P and , to select DELETE. Press P again
to delete the entry.
5.2.1
View the redial list
5.2.4
Delete entire redial list
1. Press - to enter the redial list. The last number dialed
1. Press - to enter the redial list.
is displayed.
2. Press P and , to select DELETE ALL
.
2. Scroll , through the redial list.
3. Press P and DELETE ALL? is displayed.
5.2.2
Copy a redial number to the phonebook
4. Press P to confirm and all entries are deleted.
1. Press - to enter the redial list.
2. Press , to select the entry you want.
3. Press P to select SAVE TO PB
.
4. Press P and enter the name.
Caller ID
23
6.2.1
Set the ringer tone
6. Personal Settings
1. Press P and , to select SETUP HS
.
6.1
Set Date & Time
2. Press P to select RINGER TONE
.
Providing you have subscribed to your network's Caller ID
service, the date and time is set automatically for all
handsets every time a call is received, but you may still need
to set the correct year. If you do not have a Caller ID service
you can set the date and time manually.
3. Press P and , to select a ringer melody. The
current ringer melody is played for around 5 seconds.
4. Press P to save.
6.2.2
Set the ringer volume
1. Press P to select DATE & TIME
.
1. Press P and , to select SETUP HS
.
2. Press P and edit the year and date.
2. Press P and , to select RINGER VOLUME
.
TIPS
3. Press P and , to increase or decrease the volume
level. (6 levels are available, including ringer off. The
corresponding volume effect will be played while
browsing the volume option.)
You can press , to move the cursor between the input
fields YEAR and DATE
.
3. Press P and edit the time in 12hr format. Press ,
to toggle AM PM settings.
4. Press P to save the settings.
/
4. Press P to save.
6.2.3
Key tones on/off
When you press a key on the handset you hear a beep. You
can switch these beeps on or off.
6.2
Handset Tones
WARNING
1. Press P and , to select SETUP HS
.
When the phone is ringing, avoid holding the earpiece too
close to your ear as it may damage your hearing.
2. Press P and , to select KEY TONE
.
24
Personal Settings
3. Press P and , to turn on/off the key tone.
1. Press P and , to select SETUP HS
2. Press P and , to select EQUALIZER
3. Press P and , to select from NATURAL
.
4. Press P to save.
.
6.2.4
Battery low tone on/off
,
BASS and
TREBLE
.
1. Press P and , to select SETUP HS
.
4. Press P to save.
2. Press P and , to select LOW BATT TONE
.
3. Press P and , to turn on/off the battery low tone.
6.4
Handset Name
4. Press P to save.
Personalize your handset with a name or location, for
example Peter or Bedroom. Maximum 14 characters.
6.2.5
No coverage tone on/off
1. Press P and , to select SETUP HS
.
1. Press P and , to select SETUP HS
.
2. Press P and , to select OUT RANGE TONE
.
2. Press P and , to select HANDSET NAME
3. Press P and edit the handset name.
4. Press P to save.
.
3. Press P and , to turn on/off the no coverage tone.
4. Press P to save.
NOTE
6.3
Equalizer
Handset name will be displayed on the idle screen. A space and
a handset number are automatically added after the name set.
The phone has three different frequency range filters
(Natural in 1KHz, Bass in 500Hz and Treble in 3.1KHz) to
compensate for the ear's limited sensitivity in these ranges.
6.5
Set the Display Language
You can change the display language.
For more details about the audio boost feature, please refer
to section “3.1.10 Audio boost feature”.
1. Press P and , to select SETUP HS
.
Personal Settings
25
2. Press P and , to select LANGUAGE
.
4. Press P to save.
3. Press P and , to the language you want.
6.8
Registration
4. Press P to save.
Up to 5 handsets can be registered to one base. The original
handset is pre-registered to use. Additional handsets must
be registered to the base before you can use them.
6.6
Set the LCD Contrast
1. Press P and , to select SETUP HS
.
To register an additional handset,
2. Press P and , to select LCD CONTRAST
.
1. Press P and , to select SETUP HS
.
3. Press P and , to increase or decrease the
2. Press P and , to select REGISTRATION
.
contrast level. (Five levels are available)
3. Press P and , to select YES or NO
.
4. Press P to save.
4. Select YES and press P to enter the registration
procedure as below:
6.7
Auto Talk On/Off
With auto talk is turned on, you can answer a call just by
lifting the handset off the base or charger. If turned off, you
will have to press < or J to answer a call. The default
setting is Off.
1. Place the unregistered cordless handset on the
charger.
2. Press and hold v for 4 seconds on base.
3. Release v once IN USE LED is flashing.
4. A confirmation tone is generated if registration is
1. Press P and , to select SETUP HS
.
successful. HANDSET X is displayed where denotes the
number of handsets and the phone goes back to idle.
X
2. Press P and , to select AUTO TALK
.
3. Press P and , to turn on/off auto talk.
26
Personal Settings
3. Press P and , to the flash time you want. (8
options are available: 90 100, 110, 250, 300, 400, 600 and
7. Advanced Settings
,
700MS
)
7.1
Set the Dial Mode
The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
4. Press P to save.
7.3
Set the Area Code
1. Press P and , to select SETUP BS
.
1. Press P and , to select SETUP BS
.
2. Press P and , to select AREA CODE
3. Press P and enter the area code.
4. Press P to save.
.
2. Press P to select DIAL MODE
.
3. Press P and , to select TONE or PULSE
.
4. Press P to save.
NOTE
7.4
Reset All Settings
If pulse mode is selected, press * to switch from pulse to
tone dialing temporarily when dialing out. After the call is
ended, the dial mode will change back to pulse.
All personalized settings will be reset to default. Phonebook
entries, calls list, redial list and numbers stored in the
memory will remain unchanged.
7.2
Set the Flash Time
1. Press P and , to select RESET SETTINGS
2. Press P and , to select ALL SETTINGS
3. Press P to select YES
4. Press P to reset all settings to default.
.
The default flash time is 600MS. It is unlikely that you should
need to change this setting unless advised to do so.
.
.
1. Press P and , to select SETUP BS
.
2. Press P and , to select FLASH TIME
.
Advanced Settings
27
8. Default Settings
9. Help
Items
Date & Time
Default values
Charging
YEAR: 2009
DATE: 01/01
TIME: 12:00 AM
MELODY 1
Level 3
ON
The is not scrolling when the handset is placed
on the base
Ringer tone
Ringer volume
Key tone
Battery low tone
No coverage tone
Handset name
Language
LCD contrast
Auto talk
Dial mode
•
•
Bad battery contact - move the handset slightly.
Dirty contact - Clean the battery contact with a cloth
moistened with alcohol.
•
Battery is full - no need to charge.
ON
ON
Calls
No dial tone
HANDSET
ENGLISH
Level 3
OFF
TONE
600 MS
•
•
•
•
No base power - check the connections. Reset the
phone: unplug and plug back in the electrical outlet.
Handset batteries are empty - charge the battery pack for
at least 24 hours.
Handset may be too far from the base - move closer to
the base.
Flash time
Wrong telephone line cord - use the telephone line cord
provided.
28
Default Settings
Poor audio quality
Registration
The base is too close to electrical appliances, reinforced
concrete walls or metal doorframes - move the base away
from any electrical appliances.
When the handset lost its link with the base during
a call
•
•
Check the power cord is connected properly into the base.
Check the power adapter is connected properly into an
electrical outlet.
No ring tone
•
•
The ring tone is deactivated.
Increase the volume.
•
•
Move the handset closer to the base. It may be out of
range.
Reset the base by unplugging the unit's electrical power.
Wait for around 15 seconds and plug it back in again.
Allow up to one minute for the handset and the base to
synchronize.
Caller ID service does not work
Check your subscription with your network operator.
Phonebook
A phonebook entry cannot be stored
The phonebook is full. Delete an entry to free memory.
Interference
Noise interference on your radio or television
Your base or charger may be too close. Move it as far away
as possible.
Display
No display
•
•
Try recharging or replacing the battery pack.
Reset the telephone base. Unplug the unit's electrical
power, then plug it back in.
•
If LED is not lit up, then try to unplug the unit's electrical
power, then plug it back in.
Help
29
Important safety instructions
Follow these safety precautions when using your phone to
reduce the risk of fire, electric shock, and injury to persons
or property:
10. General Information
If your product is not working properly...
1. Read this User's Guide or the Quick Start Guide.
1. Keep all slits and openings of the phone unblocked. Do
not set the phone on a heating register or over a radiator.
Ensure that proper ventilation is provided at the
installation site.
2. Do not use while wet or while standing in water.
3. Do not use this product near water (for example, near a
bath tub, kitchen sink, or swimming pool).
4. Do not allow anything to rest on the power cord. Place
the power cord so that it will not be walked on.
5. Never insert objects of any kind into the product slits as
that may result in fire or shock.
3. Contact Customer Service in the US and Canada at
1-888-331-3383.
To order a replacement battery, contact customer service or
visit our website.
6. Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
7. Do not disassemble this product. If service or repair
work is required, contact the customer service helpline
found in this user's guide.
30
General Information
8. Do not overload wall outlets and extension cords.
9. Avoid using during an electrical storm. Use a surge
protector to protect the equipment.
10. Do not use this phone to report a gas leak, especially if
you are in the vicinity of the gas line.
Installation Guidelines
1. Read and understand all instructions and save them for
future reference.
2. Follow all warnings and instructions marked on the
product.
CAUTION
3. Do not install this product near a bath tub, sink, or
shower.
4. Operate this phone using only the power source that is
indicated on the marking label. If you are unsure of the
power supply to your home, consult with your dealer or
local power company.
5. Do not place this product on an unstable cart, stand, or
table. This product may fall, causing serious damage to
the product.
6. Adjust only those controls that are covered by the
operating instructions. Improper adjustment of other
controls may result in damage and will often require
extensive work to restore the product to normal
operation.
To reduce the risk of fire, use only No. 26 AWG or larger UL
Listed or CSA Certified Telecommunication Line Cord.
Unplug this cordless phone immediately
from an outlet if:
•
•
•
The power cord or plug is damaged or frayed.
Liquid has been spilled into the product.
The product has been exposed to rain or water. Do not
retrieve the handset or base until after you have
unplugged the power and phone from the wall. Then
retrieve the unit by the unplugged cords.
•
•
The product has been dropped or the cabinet has been
damaged.
The product exhibits a distinct change in performance.
General Information
31
7. Clean this product with a soft, damp cloth. Do not use
chemicals or cleaning agents to clean this phone.
8. Use only the power supply that came with this unit.
Using other power supplies may damage the unit.
9. Because this phone operates on electricity, you should
have at least one phone in your home that could operate
without electricity in case the power in your home goes
out.
Battery Safety Instructions
•
Do not burn, disassemble, mutilate, or puncture the
battery. The battery contains toxic materials that could be
released, resulting in injury.
CAUTION
There is a risk of explosion if you replace the battery with an
incorrect battery type. Use only the battery pack that came
with your phone or an authorized replacement
recommended by the manufacturer.
10. To avoid interference to nearby appliances, do not place
the base of the phone on or near a TV, microwave oven,
or VCR.
•
•
•
Keep battery packs out of the reach of children.
Remove battery packs if storing over 30 days.
Do not dispose of battery packs in fire, which could result
in explosion.
CAUTION
To maintain compliance with the FCC’s RF exposure guidelines,
place the base unit at least 20 cm from nearby persons.
•
The rechargeable battery packs that power this product
must be disposed of properly and may need to be
recycled. Refer to your battery’s label for battery type.
Contact your local recycling center for proper disposal
methods.
SAVE THESE INSTRUCTIONS
32
General Information
What will BINATONE ELECTRONICS
INTERNATIONAL LTD. do?
Consumer Products and Accessories
purchased in the United States or Canada
BINATONE ELECTRONICS INTERNATIONAL LTD., at its
sole option, will at no charge repair, replace or refund the
purchase price of any Products or Accessories that does not
conform to this warranty. Binatone Electronics International
LTD. may use functionally equivalent reconditioned/
refurbished/ pre-owned or new Products, Accessories or
parts in such repair or replacement and any Products,
Accessories or parts removed or being replaced under this
warranty become the property of Binatone Electronics
International LTD.
What Does this Warranty Cover?
Subject to the exclusions and limitations contained below,
Binatone Electronics International LTD. warrants the
Motorola branded consumer products that it manufactures
(“Products”) and the Motorola branded or certified
accessories sold for use with these Products that it
manufactures (“Accessories”) to be free from defects in
materials and workmanship under normal consumer usage
for the period(s) outlined below. This limited warranty is a
consumer’s exclusive remedy, and only applies as follows to
new Motorola branded Products and Accessories
manufactured by Binatone Electronics International LTD.,
and purchased by consumers in the United States or
Canada, which are accompanied by this written warranty:
What Other Limitations Are There?
ANY IMPLIED WARRANTIES OR CONDITIONS
IRRESPECTIVE OF WHETHER THEY ARE IMPOSED BY
LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT,
OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF
Who is covered?
This warranty covers only the first consumer purchaser, and
is not transferable.
General Information
33
THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL
WARRANTIES AND MOTOROLA AND BINATONE
ELECTRONICS INTERNATIONAL LTD. MAKES NO OTHER
WARRANTIES OR CONDITIONS, EXPRESS OF IMPLIED.
IN NO EVENT SHALL MOTOROLA OR BINATONE
ELECTRONICS INTERNATIONAL LTD. BE LIABLE,
WHETHER UNDER THIS LIMITED WARRANTY OR IN
CONTRACT OR TORT (INCLUDING NEGLIGENCE OR
STRICT PRODUCT LIABILITY) OR OTHERWISE FOR
DAMAGES OR CLAIMS IN EXCESS OF THE PURCHASE
PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES OF ANY KIND, OR LOSS OF REVENUE,
SAVINGS OR PROFITS, LOSS OF BUSINESS, LOSS OF
PROGRAMS DATA INFORMATION (WHETHER
YOU ON BEHALF OF ANY THIRD PARTY TO THE FULL
EXTENT THESE DAMAGES OR CLAIMS MAY BE
DISCLAIMED BY LAW.
Some states, countries or jurisdictions do not allow the
limitation or exclusion of incidental or consequential
damages, or limitation on the length of an implied warranty,
so the above limitations or exclusions may not apply to you
in such states, countries or jurisdictions. This warranty gives
you specific legal rights, and you may also have other rights
that vary from state to state or from one country/jurisdiction
to another.
Products or
Length of Coverage
Accessories Covered
Consumer Products
One (1) year from the date
of purchase by the first
consumer purchaser of the
product.
CONFIDENTIAL PROPRIETARY OR PERSONAL IN
NATURE OR OTHERWISE) OR OTHER FINANCIAL LOSS
ARISING OUT OF OR IN CONNECTION WITH THE ABILITY
OR INABILITY TO USE THE PRODUCTS OR
ACCESSORIES AND BINATONE ELECTRONICS
INTERNATIONAL LTD. SHALL UNDER NO
Consumer Accessories Ninety (90) days from the
date of purchase by the first
consumer purchaser of the
accessory.
CIRCUMSTANCES BE LIABLE FOR ANY CLAIMS OR
DEMANDS MADE BY ANY THIRD PARTY OR MADE BY
34
General Information
instructions that came with the Products or Accessories; (c)
contact with liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or food; (d)
use of the Products or Accessories for commercial purposes
or subjecting the Product or Accessory to abnormal usage or
conditions; or (e) other acts or omissions which are not the
fault or neglect of Motorola or Binatone Electronics
Consumer Products and The balance of the original
Accessories that are warranty or for ninety (90)
Repaired or Replaced days from the date returned
to the consumer, whichever
is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are
excluded from coverage.
International LTD., are excluded from coverage.
Use of Non-Motorola branded Products and
Accessories. Defects or damage that result from the use of
Non-Motorola branded or certified Products or Accessories
or other peripheral equipment are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls
below 80% of their rated capacity and batteries that leak are
covered by this limited warranty. Battery life and the changes
in battery capacity with time or use are excluded from this
warranty.
Unauthorized Service or Modification. Defects or
damages resulting from service, testing, adjustment,
installation, maintenance, alteration, or modification in any
way by someone other than Motorola, Binatone Electronics
International LTD. or its authorized service centers, are
excluded from coverage.
Abuse & Misuse. Defects or damage that result from: (a)
improper or unreasonable use, operation, storage, misuse or
abuse, accident or neglect or other external cause, such as
physical damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) your failure to follow or
operation outside the usage parameters stated in the user
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of
General Information
35
tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts,
are excluded from coverage.
These terms and conditions constitute the complete warranty
agreement between you and BINATONE ELECTRONICS
INTERNATIONAL LTD. regarding the Products or Accessories
purchased by you, and supersede any prior agreement or
representations, including representations made in any
literature publications or promotional materials issued by
BINATONE ELECTRONICS INTERNATIONAL LTD. or
representations made by any agent employee or staff of
BINATONE ELECTRONICS INTERNATIONAL LTD., that may
have been made in connection with the said purchase.
Communication Services. Defects, damages, or the failure
of Products or Accessories due to any communication
service or signal you may subscribe to or use with the
Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other
Information?
To obtain service or information, please call:
FCC, ACTA and IC regulations
US and Canada: 1-888-331-3383
FCC Part 15
You will receive instructions on how to ship the Products or
Accessories, the shipment of which shall be at your own risk
and expense, to a BINATONE ELECTRONICS
INTERNATIONAL LTD. Authorized Repair Center. To obtain
service, you must include: (a) a copy of your receipt, bill of
sale or other comparable proof of purchase of the Products
or Accessories showing the date of purchase; (b) a written
description of the problem; and, most importantly; (c) your
address and telephone number.
This equipment has been tested and found to comply with
the requirements for a Class B digital device under Part 15
of the Federal Communications Commission (FCC) rules.
These requirements are intended to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
36
General Information
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
communications may not be ensured when using this
telephone.
To ensure safety of users, the FCC has established criteria
for the amount of radio frequency energy that can be safely
absorbed by a user or bystander according to the intended
usage of the product. This product has been tested and
found to comply with the FCC criteria. The handset may be
safely held against the ear of the user. The corded base shall
be installed and used such that parts of the user's body other
than the hands are maintained at a distance of
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian
ICES-003.
Changes or modifications to this equipment not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and
with technical requirements adopted by the Administrative
Council for Terminal Attachments (ACTA). The label on the
back or bottom of this equipment contains, among other
things, a product identifier in the format US:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation. Privacy of
AAAEQ##TXXXX. This identifier must be provided to your
local telephone company upon request.
General Information
37
The plug and jack used to connect this equipment to
premises wiring and the telephone network must comply with
applicable Part 68 rules and technical requirements adopted
by ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to
a compatible modular jack that is also compliant. An RJ11
jack should normally be used for connecting to a single line
and an RJ14 jack for two lines. See Installation Instructions in
the user's manual.
questions about what will disable alarm equipment, consult
your telephone company or a qualified installer.
If this equipment is malfunctioning, it must be unplugged
from the modular jack until the problem has been corrected.
Repairs to this telephone equipment can only be made by
the manufacturer or its authorized agents. For repair
procedures, follow the instructions outlined under the
Limited Warranty.
If this equipment is causing harm to the telephone network,
the telephone company may temporarily discontinue your
telephone service. The telephone company is required to
notify you before interrupting service. If advance notice is not
practical, you will be notified as soon as possible. You will be
given the opportunity to correct the problem and the
telephone company is required to inform you of your right to
file a complaint with the FCC. Your telephone company may
make changes in its facilities, equipment, operation, or
procedures that could affect the proper functioning of this
product. The telephone company is required to notify you if
such changes are planned.
The Ringer Equivalence Number (REN) is used to determine
how many devices you may connect to your telephone line
and still have them ring when you are called. The REN for
this product is encoded as the 6th and 7th characters
following the US: in the product identifier (e.g., if ## is 03, the
REN is 0.3). In most, but not all areas, the sum of all RENs
should be five (5.0) or less. For more information, please
contact your local telephone company.
This equipment may not be used with Party Lines. If you
have specially wired alarm dialing equipment connected to
your telephone line, ensure the connection of this equipment
does not disable your alarm equipment. If you have
38
General Information
If this product is equipped with a corded or cordless handset,
it is hearing aid compatible.
number of devices allowed to be connected to a telephone
interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that
the sum of the RENs of all the devices does not exceed five.
If this product has memory dialing locations, you may
choose to store emergency telephone numbers (e.g., police,
fire, medical) in these locations. If you do store or test
emergency numbers, please:
This product meets the applicable Industry Canada technical
specifications.
•
Remain on the line and briefly explain the reason for the
call before hanging up.
Perform such activities in off-peak hours, such as early
morning or late evening.
RENSEIGNEMENTS RELATIFS AUX
RÈGLEMENTS DE LA COMMISSION
FÉDÉRALE DES COMMUNICATIONS 'FCC',
DU CONSEIL ADMINISTRATIF DES UNITÉS
DE CONNEXION 'ACTA' ET D'INDUSTRIE
Canada 'IC'
•
Industry Canada
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference, including interference
that may cause undesired operation.
Article 15 des règlements du FCC
Cet appareil a été testé et s'avère conforme aux restrictions
relatives aux équipements numériques de classe B, d'après
l'article 15 des règlements de la FCC. Ces restrictions ont
été instaurées pour offrir une protection raisonnable contre
les interférences nuisibles au sein d'une installation
résidentielle. Cet appareil génère, utilise et peut émettre des
The term "IC: " before the certification/registration number
only signifies that the Industry Canada technical
specifications were met.
The Ringer Equivalence Number (REN) for this terminal
equipment is 0.0. The REN is an indication of the maximum
General Information
39
fréquences radio et s'il n'est pas installé selon les
instructions, peut nuire aux radiocommunications. Toutefois,
rien ne garantit que des parasites ne surviendront pas dans
une installation particulière. Si cet appareil cause des
interférences nuisibles à la réception du téléviseur ou de la
radio, ce que vous pouvez déterminer en mettant votre
appareil en et hors fonction, nous vous invitons à essayer
l'une des mesures correctives suivantes :
Cet appareil ne doit pas causer d'interférences nuisibles et; (2)
Il doit pouvoir supporter les parasites qu'il reçoit, incluant les
parasites pouvant nuire à son fonctionnement. La
confidentialité des communications peut ne pas être assurée
avec ce téléphone.
Afin de garantir la sécurité des utilisateurs, la FCC a établi
les critères relatifs à l'énergie générée par les fréquences
radio pouvant être absorbée en toute sécurité par un
utilisateur ou par quelqu'un se trouvant à proximité,
dépendamment de l'utilisation prévue du produit. Ce produit
a été testé et s'avère conforme aux normes de la FCC. Le
combiné produit si peu de puissance qu'il n'a pas besoin
d'être testé. Il peut être déposé contre l'oreille de l'utilisateur
en toute sécurité. Il peut être appuyé en toute sécurité sur
l'oreille de l'utilisateur. Le socle doit être installé et utilisé de
façon à ce qu'une distance d'environ 20 cm (8 po.) ou plus
soit conservée entre celui-ci et les parties du corps de
l'utilisateur, à l'exception des mains.
•
•
•
Réorientez l'antenne de réception.
Éloignez l'appareil du composant qui reçoit les ondes.
Branchez l'appareil dans une prise de courant CA
différente de celle du composant qui reçoit les ondes.
Au besoin, consultez votre marchand électronique ou un
technicien spécialisé dans le service des radios/
téléviseurs pour des suggestions supplémentaires.
•
Toute modification ou changement effectué à cet appareil
sans l'accord des parties responsables de l'homologation
peut retirer à l'utilisateur son droit d'utiliser l'appareil.
Cet appareil est conforme à l'article 15 de la FCC. Le
fonctionnement est soumis aux deux conditions suivantes: (1)
Cet appareil numérique de classe B est conforme aux
normes canadiennes ICES-003.
40
General Information
Le numéro 'REN' sert à déterminer combien de dispositifs
téléphoniques peuvent être raccordés à votre ligne
téléphonique sans perdre leur capacité de sonner lorsqu'on
vous appelle. Le numéro 'REN' de cet appareil est encodé
entre le 6e et le 7e caractère après "US:" dans l'identification
de l'appareil (par exemple, si les numéros sont 03, le REN
sera 3.0). Dans la plupart, mais pas toutes les régions, la
somme de tous les numéros 'REN' devrait être de cinq (5.0)
ou moins. Pour plus de détails à ce sujet, nous vous
suggérons de communiquer avec votre compagnie de
téléphone locale.
Article 68 de la FCC et exigences de l'ACTA
Cet appareil est conforme à l'article 68 de la réglementation de
la Commission fédérale des communications 'FCC' aux États-
Unis et aux exigences adoptées par le Conseil d'administration
du matériel terminal 'ACTA'. Vous trouverez, sous l'appareil,
une étiquette qui contient, entre autres renseignements, une
plaque signalétique dans le format 'US: AAAEQ##TXXXX'. Si
on vous le demande, vous devez fournir ce numéro à la
compagnie de téléphone. Cette homologation doit vous être
fournie par votre compagnie de téléphone locale, sur demande.
La fiche et la prise utilisées pour brancher cet appareil au
filage du bâtiment et au réseau téléphonique doivent être
conformes avec les règlements de l'article 68 et les
exigences techniques adoptées par l'ACTA. Un cordon
téléphonique et une fiche modulaire conformes sont fournis
avec cet appareil. Celui-ci a été conçu pour être raccordé à
une prise modulaire compatible qui est également conforme.
Une prise RJ11 doit être utilisée pour le raccord à une ligne
simple et une prise RJ14, pour le raccord à deux lignes.
Consultez les instructions d'installation du guide d'utilisation.
Cet appareil ne peut pas être utilisé conjointement avec des
lignes partagées. Si vous avez des composants de
systèmes d'alarme connectés sur votre ligne téléphonique,
assurez-vous que le raccord de cet appareil ne désactive
pas votre système d'alarme. Si vous avez des questions se
rapportant à ce qui peut désactiver votre système d'alarme,
consultez votre compagnie de téléphone ou un installateur
qualifié.
Si l'appareil s'avérait défectueux, il doit être immédiatement
débranché de la prise modulaire jusqu'à ce que le problème
General Information
41
soit corrigé. Cet appareil ne doit être réparé que par son
fabricant ou l'un des centres de service autorisés par celui-
ci. Pour plus de détails sur les procédures de service, suivez
les instructions décrites dans la Garantie limitée.
d'urgence de votre municipalité (police, incendie et services
médicaux). Si vous entrez et testez des numéros d'urgence,
veuillez procéder comme suit:
•
Demeurez en ligne et expliquez brièvement la raison de
votre appel avant de raccrocher.
Si cet appareil nuit au réseau téléphonique, la compagnie de
téléphone peut décider d'arrêter temporairement votre
service téléphonique. Elle est tenue de vous avertir avant
d'interrompre le service; si elle ne peut pas vous avertir
d'avance, elle le fera dès qu'elle le pourra. On vous donnera
l'opportunité de rectifier le problème et la compagnie doit
vous informer de votre droit de porter plainte à la FCC. Votre
compagnie de téléphone peut apporter des modifications à
ses installations, ses équipements et ses procédures
pouvant altérer le fonctionnement normal de votre appareil.
Par contre, elle est tenue de vous avertir lorsque de tels
changements sont prévus.
•
Procédez à ceci hors des heures de pointe, tel que tôt le
matin ou tard en soirée.
Industrie Canada
Le fonctionnement est soumis aux deux conditions
suivantes : (1) Cet appareil ne doit pas causer
d'interférences nuisibles et; (2) Il doit pouvoir supporter les
parasites qu'il reçoit, incluant les parasites pouvant nuire à
son fonctionnement.
L'abréviation 'IC' se trouvant avant cette homologation
signifie que la certification fut effectuée selon une
déclaration de conformité spécifiant que les normes
d'Industrie Canada ont été rencontrées.
Si cet appareil est doté d'un combiné avec ou sans cordon,
celui-ci est compatible avec les appareils auditifs pour
malentendants.
Le numéro d'équivalence de sonnerie 'REN' assigné à cet
appareil est 0.0. Ce numéro attribué à chaque appareil
détermine le nombre de dispositifs téléphoniques que l'on
peut brancher dans le circuit téléphonique de la maison sans
Si cet appareil possède des adresses mémoire, vous
pouvez y entrer les numéros de téléphone des services
42
General Information
surcharger le système. Le circuit téléphonique peut
comporter n'importe quelle combinaison de dispositifs
téléphoniques, à la seule condition que la somme du numéro
'REN' n'excède pas cinq.
Cet appareil est conforme aux spécifications techniques
d'Industrie Canada.
Technical Specifications
RF frequency band
Channels
1921.536 MHz — 1928.448 MHz
5
Operating temperature
5ºC to 45ºC
96 — 130 Vrms
Telephone base voltage
(AV voltage, 60Hz)
Telephone base voltage
(Adapter output)
6V AC, 300mA
Handset voltage
2.4V 550mAh Ni-MH battery
pack
Charge voltage
(Adapter output)
6V AC, 300mA
General Information
43
Manufactured, distributed or sold by Binatone
Electronics International LTD., official licensee for
this product. MOTOROLA and the Stylized M
Logo, and other Motorola trademarks and trade
dress are owned by Motorola, Inc. and are used
under license from Motorola, Inc. MOTOROLA and
the Stylized M Logo are registered in the US Patent
& Trademark Office. All other product or service
names are the property of their respective owners.
© Motorola, Inc. 2009. All rights reserved.
Version 1.0
Printed in China
|
