Operating and installation instructions
Open barbeque grill
CS 1312
CS 1322
en - GB
To avoid the risk of accidents or
damage to the appliance it is
essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 07 180 420
Contents
Installation of several appliances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Fixing the spring clamps and spacer bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Installing the appliance(s). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
General installation tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
After sales service, data plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3
Guide to the appliance
CS 1312
aGrill rack
Controls for the heating elements:
bFront heating element
cRear heating element
dLava rock container
eDrain tap
hFront
iRear
Display
fSymbols to indicate which
heating element the control is for
gDisplay
jIn-operation indicator
4
Guide to the appliance
CS 1322
aGrill racks
Controls for the heating elements:
bFront heating element
cRear heating element
dLava rock container
eDrain tap
hFront
iRear
Display
fSymbols to indicate which
heating element the control is for
gDisplay
jIn-operation indicator
5
Guide to the appliance
Accessories supplied
Additional accessories can be ordered at extra cost. See
"Optional accessories" for further details on ordering.
Lava rocks
Tongs
Brush
6
Warning and safety instructions
Correct application
This appliance complies with all
current safety requirements.
Inappropriate use can, however,
This appliance is not designed for
~
commercial use. It is intended for use in
domestic households and in similar
lead to personal injury and damage
to property
working and residential environments
such as:
– Shops
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time. They
contain important notes on
installation, safety, use and
maintenance.
– Offices and showrooms
and by residents in establishments
such as:
– Hostels and guest houses.
The appliance is intended for
~
domestic use only to cook food and
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner.
keep it warm.
Any other use is not supported by the
manufacturer and could be dangerous.
Miele cannot be held liable for damage
resulting from incorrect or improper use
or operation of the appliance.
This appliance is not intended for
~
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless they
are supervised while using it or have
been given instruction concerning its
use by a person responsible for their
safety.
7
Warning and safety instructions
Safety with children
Ensure that children cannot reach
~
the drain tap where hot liquid could be
This appliance is only intended for
~
drained out.
use by adults who have read these
instructions. It is not a toy! To avoid the
risk of injury, keep children well away
and do not allow them to play with it or
use the controls. They will not
Packaging, e.g. cling film,
~
polystyrene and plastic wrappings,
must be kept out of the reach of babies
and young children. Danger of
understand the potential dangers
suffocation. Dispose of or recycle all
posed by it. They should be supervised packaging safely as soon as possible.
whenever you are working in the
kitchen.
Older children may use the
~
appliance only when its operation has
been clearly explained to them and
they are able to use it safely,
recognising the dangers of misuse.
The appliance gets hot when in use
~
and remains hot for quite a while after
being switched off. To safeguard
against burning, keep children well
away from the appliance at all times.
Do not store anything which might
~
arouse a child's interest in storage
areas above or next to the grill.
Otherwise they could be tempted into
climbing onto the appliance with the
risk of burning themselves.
8
Warning and safety instructions
Technical safety
Installation, maintenance and
~
repairs may only be carried out by a
Before installation, check the
~
suitably qualified and competent
appliance for visible signs of damage.
Under no circumstances should you
use a damaged appliance. It could be
dangerous.
person in strict accordance with current
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. Miele
cannot be held liable for unauthorised
work.
The electrical safety of this
~
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system. It is
most important that this basic safety
requirement is present and regularly
tested, and where there is any doubt,
the household wiring system should be
inspected by a qualified electrician.
Miele cannot be held liable for the
consequences of an inadequate
During installation, maintenance and
~
repair work, the appliance must be
disconnected from the mains electricity
supply.
While the appliance is under
~
guarantee, repairs should only be
undertaken by a service technician
authorised by Miele. Otherwise the
guarantee is invalidated.
earthing system (e.g. electric shock).
Before connecting the appliance to
Faulty components must only be
~
~
the mains supply, make sure that the
voltage and frequency correspond to
the rating on the data plate, otherwise
the appliance could be damaged.
Consult a qualified electrician if in any
doubt.
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
If the connection cable is damaged,
~
For safety reasons, this appliance
~
may only be used when it has been
it must be replaced by a suitably
qualified electrician with a specialist
connection cable of type H 05 V V-F
(pvc insulated), available from the Miele
Spare Parts Department.
built in.
Never open the casing of the
~
appliance.
Tampering with electrical connections
Do not connect the appliance to the
~
or components and mechanical parts is mains electricity supply by a
highly dangerous to the user and can
cause operational faults.
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the appliance (e.g. danger of
overheating).
9
Warning and safety instructions
This appliance may be connected
Correct use
~
via a fused plug and switched socket. If
you wish to connect it to an fused spur
connection unit, or if the appliance is
supplied without a plug, it must be
installed and connected by a suitably
qualified and competent person in strict
accordance with current local and
national safety regulations. Miele
cannot be held liable for damage
caused by incorrect installation or
connection.
The appliance gets hot when in use
~
and remains hot for quite a while after
being switched off.
Caution: Danger of burning.
Do not leave the appliance
~
unattended whilst it is being used.
Overheated oil or residues of food or fat
on the lava rocks could flare up and
cause a fire.
If oil or fat does catch fire, do not
~
In countries where there are areas
attempt to put out the flames with water.
Use a suitable fire blanket, saucepan
lid, damp towel or similar to smother the
flames.
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage caused by cockroaches or
other vermin will not be covered by the
guarantee.
Do not use the appliance to heat up
~
the room, and never switch it on with
the heating element in the raised
position. Due to the high temperatures
radiated, objects near the appliance
could catch fire. The life of the
appliance could also be reduced.
Use heat-resistant pot holders or
~
gloves when using the appliance. Do
not let them get damp or wet, as this
causes heat to transfer through the
material more quickly with the risk of
scalding or burning yourself.
Do not flambé on the open
~
barbecue grill. Fire hazard.
10
Warning and safety instructions
Do not use the appliance as a
The grill trough must always be filled
~
with water whenever the grill is in use.
~
resting place for anything else. When
the appliance is switched on either
deliberately or by mistake, or when
there is residual heat present, there is
the risk of metal objects heating up,
with a danger of burning.
When using an electrical appliance,
~
e.g. a hand-held food blender, near the
appliance, ensure that the cable of the
electrical appliance cannot come into
contact with the hot appliance. The
insulation on the cable could become
damaged, giving rise to an electric
shock hazard.
Depending on the material, other
objects left on the appliance could also
melt or catch fire.
Switch the appliance off after use.
Always ensure that food is
~
Where several appliances are
~
installed side by side
sufficiently cooked or reheated. Some
foods may contain micro-organisms
which are only destroyed by thorough
cooking at a sufficiently high
Do not place hot pots or pans on the
joining strip as this can damage the
seal.
temperature for long enough.
Do not cover the appliance, e.g.
Therefore, when cooking or reheating
~
with a cloth, kitchen foil, etc. This could food such as poultry, it is particularly
be a fire hazard if the hob were
switched on by mistake.
important that the food is completely
cooked through. If in doubt, select a
longer cooking or reheating time.
When grilling or keeping food warm,
~
do not use grill pans, griddles,
saucepans or similar on the open grill,
and never cover the rack(s) (e.g. with
aluminium foil) or use disposable
aluminium foil containers. The resulting
build-up of heat could damage the
rack(s).
If the appliance is installed behind a
~
kitchen furniture door, it may only be
used with the furniture door open.
Only close the door if the appliance is
switched off.
This appliance must not be set up or
~
operated in the open air.
Do not heat up unopened tins or jars
~
of food on the grill as pressure will build
up in the tin or jar, causing it to
explode. This could result in injury and
scalding or damage.
Miele cannot be held liable for
damage caused by non-compliance
with these Warning and safety
instructions.
Clean the lava rocks regularly and
~
replace them when necessary. Rocks
which are saturated catch fire easily.
The grill trough and the lava rock
container should be cleaned after each
use to keep them free of oil and fat.
11
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and should be recycled.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Please dispose of it at your local
community waste collection/recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
12
Before using for the first time
Please stick the extra data plate for the
appliance supplied with this
documentation in the space provided in
the "After sales service" section of this
booklet.
Cleaning for the first time
^ Remove any protective foil and
adhesive labels.
^ Wash the grill trough and the rack in
hot water with a little washing-up
liquid, and dry thoroughly (see
"Cleaning and care").
^ Clean the other surfaces with a damp
cloth, and then wipe dry.
Metal components have a protective
coating which may give off a slight
smell when heated up for the first
time. The smell and any vapours will
dissipate after a short time, and do
not indicate a faulty connection or
appliance.
13
Operation
Grill chart
The times given in the table serve as a guide, based on a pre-heated grill at
settings 9 to 12. The grilling time required will depend on the type of food, its
texture and thickness as well as personal taste.
Food
Time in minutes
Meat and sausages
Sausages
6 - 8
4 - 10
12 - 16
16 - 18
4 - 8
Fillet steak
Burgers
Chicken drumsticks
Lamb chops
Liver
3 - 6
Turkey escalopes
Kebabs
8 - 10
14 - 18
8 - 12
15 - 20
10 - 20
Cutlets/schnitzel
Spare ribs
T-bone steak
Fish and seafood
Trout
12 - 16
2 - 4
Prawns
Salmon steak
Mackerel
10 - 12
10 - 12
6 - 8
Tuna fish steak
14
Operation
Food
Time in minutes
Vegetables
Aubergines
6 - 8
10 - 20
5 - 6
Jacket potatoes, pre-cooked
Vegetarian kebabs
Corn on the cob, pre-cooked
Peppers, cut into strips
Tomato halves
Fruit
5 - 8
2 - 3
2 - 4
Pineapple slices
Apple slices
2 - 3
2 - 3
Miscellaneous
Toast
2 - 3
4 - 6
Tofu
15
Operation
To prepare the grill
Switching on and off
The grill can be used with or without the The grill has 2 heating elements which
lava rocks. Without the lava rocks the can be switched on and regulated
rising steam keeps the food being independently. Both elements can be
grilled moist. Grilling with the lava rocks used together when grilling large
creates a particularly intensive aroma.
quantities of food. For smaller
quantities, the front element can be
used to grill the food whilst the rear
element can be used to keep food
warm at settings 3 or 4.
^ Check that the drain tap is closed.
^ Remove the rack (or racks,
depending on model), lift up the
heating elements, and if not being
used, take the lava rock container
out.
To switch the heating elements on or
off, the appropriate control is turned in
a clockwise or anti-clockwise direction.
N lights up in the display after the
appliance has been switched on, and
goes out again once the grill has been
switched off.
^ Fill the grill trough
– when grilling without lava rocks up
to marker line a with
approx. 2.5 litres of water (CS 1312)
approx. 4.0 litres of water (CS 1322).
– when grilling with lava rocks with
approx. 1.2 litres of water (CS 1312)
approx. 1.8 litres of water (CS 1322).
^ If using lava rocks, put the container
back in the grill trough.
^ Lower the heating elements again,
and put the rack back on it.
16
Operation
Grilling
Useful tips
– Pat dry wet food with kitchen paper
to absorb surplus moisture and avoid
spitting.
When grilling, keep an eye on the
level of water in the trough. If
necessary, add more water.
– To prevent meat drying out, do not
season with salt until after it has
been cooked.
When grilling or keeping food warm,
do not use grill pans, griddles,
saucepans or similar on the open
grill, and never cover the rack(s)
(e.g. with aluminium foil). The
resulting build-up of heat could
damage the rack(s).
– Marinating often improves the flavour
of food to be grilled.
– Brush food that has not been
marinated with a little oil. Only use
oils that can be heated to a high
temperature.
– The grilling time for jacket potatoes
and corn on the cob can be reduced
by pre-cooking potatoes for 15-40
minutes (depending on the size) and
corn on the cob for 10-15 minutes.
^ Turn one or both controls to setting
"12".
^ Pre-heat the grill with the rack(s) in
place for approx. 10 minutes.
Make sure the control(s) are set
precisely to setting 12.
After grilling
If the controls are not set to the exact
position, the heating will not work with
maximum power.
^ Switch off the appliance.
^ Clean the grill after each use while it
is still warm to the touch (see
"Cleaning and care").
^ Select the setting you require.
^ After grilling check the appearance
of the lava rocks. If they look dark,
they are saturated with oil and must
be cleaned or replaced.
^ Turn the food once or more during
grilling.
17
Safety features
Overheating protection
Safety switch-out
A safety cut-out automatically switches
the appliance off if the water level
drops too low.
A safety cut-out ensures that the grill
elements only heat up when they are
lying horizontally and not when they are
raised up.
^ Add some cold water.
As soon as the appliance has cooled
down, the heating elements switch
back on again and you can continue
grilling.
18
Cleaning and care
To avoid damaging the stainless
steel surfaces of your appliance, do
not use:
,Do not use a steam cleaning
appliance to clean this appliance.
The steam could reach the electrical
components and cause a short
circuit.
– cleaning agents containing soda,
alkalines, ammonia, acids or
chlorides,
Clean the appliance regularly,
– cleaning agents containing
descaling agents,
preferably after each use. Allow the
appliance to cool down to a safe
temperature before cleaning. To avoid
water marks and limescale deposits,
use a soft cloth to dry surfaces that
have been cleaned with water.
– stain or rust removers,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– dishwasher cleaner,
Abrasive cleaning agents and
scouring sponges may only be used
to clean the heating elements.
– grill and oven cleaners,
– glass cleaning agents,
– hard, abrasive brushes or sponges,
e.g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents,
– sharp pointed objects
(these can damage the seal between
the frame and the worktop).
19
Cleaning and care
Stainless steel
Heating elements
The ceramic and stainless steel hob
Use a scouring sponge to clean any
cleaner is suitable for cleaning stainless residues left on the heating elements.
steel surfaces (see "Optional
accessories").
Lava rocks
To help prevent resoiling, we
recommend a stainless steel
conditioner (see "Optional
accessories").
Clean the lava rocks regularly.
Soak them in a suitable container in hot
water with a little washing-up liquid,
then swirl them around in the water
several times. Pour away the dirty
water, and rinse 2 or 3 times in clean
water. Lay the rocks out to dry on a
suitable towel.
Apply sparingly with a soft cloth.
Do not use a stainless steel cleaning
agent on printed surfaces. This
would rub off the print. These areas
should be only cleaned with an
E-Cloth or with a solution of warm
water and a little washing-up liquid
applied with a soft sponge.
Washing lava rocks removes the
outer used layer. The speed with
which the lava rocks wear down will
depend on how often they are used
and for how long.
Rack and lava rock container
If the lava rocks in the container are
reduced by half, they should be
replenished.
Wash the rack and lava rock container
after every use in hot water with a little
washing-up liquid. If the rack is heavily
soiled it should be soaked first and then
any soiling can be removed using a soft
brush.
If the lava rock container is heavily
soiled a non-abrasive stainless steel
spiral pad can be used together with a
little stainless steel cleaning agent.
Leave to dry thoroughly after cleaning
them.
Do not use conditioning agents for
stainless steel in the lava rock
container.
20
Cleaning and care
Grill trough
Ensure that the underside of the
appliance is always easily
Clean the grill trough after each use.
accessible for draining water.
^ After grilling, allow the water in the
trough to cool down before draining
it.
Always wait until the water has
cooled down before draining to
avoid the danger of being scalded.
^ Place a container large enough to
take the contents of the trough under
the drain.
^ Open the drain tap under the grill by
turning it anti-clockwise a.
^ Once the water has all drained, turn
off the tap by turning it clockwise b
as far as it will go.
^ Wash the grill trough after every use
with hot water and a little washing-up
liquid. If it is heavily soiled a
non-abrasive stainless steel spiral
pad can be used together with a little
stainless steel cleaning agent.
^ Drain the suds solution into a suitable
container and then clean the drain
outlet with a bottle brush. Rinse with
hot water, and then wipe the grill
trough and the drain dry.
Never use a conditioning agent for
stainless steel on the grill trough.
21
Problem solving guide
What to do if...
Installation work and repairs to
electrical appliances must only be
carried out by a suitably qualified
and competent person in strict
accordance with current local and
national safety regulations (BS 7671
in the UK). Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
... after switching on, the appliance
does not heat up.
Check whether
– the overheating protection
mechanism has been activated.
Proceed as described in
"Overheating protection".
– the mains fuse has tripped. If it has,
contact a qualified electrician or the
Miele Service Department.
unauthorised work.
... the food does not begin to brown
when the appliance has been
pre-heated at setting "12" for 10
minutes.
Check that the control marker is exactly
at setting "12". If it between settings "12"
and "0", the grill heats at a lower power
setting.
22
Optional accessories
Miele offers a range of useful accessories designed for your
appliance.
These can be ordered via the internet at
contact details) or from your Miele dealer.
Griddle CSGP 1300
Cast-iron griddle to place on top of the CS 1312 grill,
with a flat and a fluted side
Griddle CSGP 1400
Cast-iron griddle to place on top of the CS 1322 grill,
with a flat and a fluted side
Wire frame for griddle CSPG 1300
Wire frame for griddle CSPG 1400
Handle
23
Optional accessories
Cleaning and care products
Ceramic and stainless steel hob cleaner 250 ml
Removes heavy soiling, limescale deposits and light
discolouration
Stainless steel conditioning agent 250 ml
Removes water marks, flecks and finger prints.
Helps keep the appliance looking good for longer.
E-Cloth (microfibre cloth)
Removes finger marks and light soiling.
24
Safety instructions for installation
Observe carefully the safety
~
distances given on the following pages.
Fit the wall units and extractor hood
before fitting the barbecue grill to
avoid damaging the surface.
Do not use any sealant except
~
where expressly instructed to do so.
The seal underneath the appliance
provides a sufficient seal for the
worktop.
The veneer or laminate coatings of
~
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
All dimensions in this instruction booklet
are given in mm.
Any backmoulds must be of
heat-resistant material.
This appliance may only be used in
~
mobile installations such as ships, if a
risk assessment has been carried out
by a suitably qualified engineer.
The barbecue grill must not be
~
installed directly next to a
salamander (CS 1421). It is essential to
maintain a distance of at least 150 mm
between these two appliances.
After installing the grill, ensure that
~
the connection cable is without
hindrance and that there is no
mechanical obstruction which could
damage it, e.g. when draining the
appliance.
Ensure that the electrical cable is
~
installed in such a way that it does not
touch any parts of the appliance which
become hot. The cable will be
damaged by extreme heat.
25
Safety instructions for installation
Safety distance above the grill
When two or more appliances are
installed together below a cooker hood,
e.g. a grill and an induction hob
combiset, which have different safety
distances given in the installation
instructions, you should select the
greater distance of the two.
A minimum safety distance must be
maintained between the hob and the
cooker hood above it. See the cooker
hood manufacturer’s operating and
installation instructions for details.
If the manufacturer’s instructions are
not available for the cooker hood, then
a minimum safety distance of at least
760 mm must be maintained. For any
flammable objects, e.g. utensil rails,
wall units etc, a minimum distance of at
least 760 mm must be maintained
between them and the appliance
below.
26
Safety instructions for installation
Safety distances to the sides of the
grill
Ideally the grill should be installed with
plenty of space on either side. There
may be a wall at the rear and a tall unit
or wall at one side. On the other side,
however, no unit or divider should
stand higher than the built-in appliance
(see illustrations).
Due to the high temperatures radiated
by the grill, it is essential that a
minimum distance of 50 mm is
maintained between the worktop
cut-out and the back wall.
Recommended
The minimum distance a between the
worktop cut-out and a wall or tall unit to
the right or left of it is:
40 mm for CS 1212
CS 1221
CS 1234
CS 1223
50 mm for CS 1112
CS 1122
Not recommended
CS 1134
CS 1326
CS 1411
100 mm for CS 1012
CS 1013
150 mm for CS 1421
CS 1312
CS 1322
200 mm for CS 1034
250 mm for CS 1011
CS 1018
CS 1021
Not allowed
27
Safety instructions for installation
Safety distance when installing the appliance near a wall with additional
niche cladding
A minimum safety distance must be maintained between the worktop cut-out and
any niche cladding to protect it from heat damage.
If the niche cladding is made from a combustible material (e. g. wood) a
minimum safety distance e of 50 mm must be maintained between the cut-out
and the cladding.
If the niche cladding is made from a non-combustible material (e. g. metal,
natural stone, ceramic tiles) a minimum safety distance e of 50 mm less the
thickness of the cladding must be maintained between the cut-out and the
cladding.
Example: 15 mm niche cladding
50 mm - 15 mm = minimum safety distance of 35 mm
aMasonry
bNiche cladding
Dimension x = thickness of niche cladding material
cWorktop
dWorktop cut-out
eMinimum safety distance
for combustible materials is 50 mm
for non-combustible materials is 50 mm less dimension x
28
Appliance and building-in dimensions
CS 1312
aSpring clamps
bFront
cCasing depth
dCasing depth plus depth of mains connection box with mains connection cable,
L = 2,000 mm
eDrain tap
29
Appliance and building-in dimensions
CS 1322
aSpring clamps
bFront
cCasing depth
dCasing depth plus depth of mains connection box with mains connection cable,
L = 2,000 mm
eDrain tap
30
Preparing the worktop
^ Make the worktop cut-out for one or
more appliances as applicable.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the right or left of the
appliance(s).
See "Safety instructions for
installation".
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
If, during installation, you find that the
seals on the corners of the frame are
not flush with the worktop surface,
the corner radius (ß R4) can be
carefully scribed to fit.
31
Installation of several appliances
When installing two or more appliances next to each other a spacer bar b must
be used between each one.
See "Fixing the spring clamps and spacer bars".
Worktop cut-out
- two appliances
Worktop cut-out
- three appliances
To calculate the cut-out width (D) required:
Add up the widths of each appliance (e.g. width A + B + C etc.) and subtract
16 mm from this figure
(i.e. 8 mm is taken off either end of the appliance run).
Number of
appliances
Appliance width in mm Worktop cut-out in mm
1
2
2
3
3
288
288 - 16 = 272
288, 288
288 + 288 - 16 = 560
288 + 380 - 16 = 652
288 + 288 + 288 - 16 = 848
288 + 288 + 380 - 16 = 940
288, 380
288, 288, 288
288, 288, 380
32
Installation of several appliances
aSpring clamps
bSpacer bars
cGap between spacer bar and worktop
dSealing strip
The illustration shows a worktop cut-out with spring clamps a and spacer bars b
for 3 appliances.
An additional spacer bar is required for each additional appliance. The position
for securing each additional spacer bar will depend on the width of appliance B
(288 mm / 380 mm / 576 mm).
33
Fixing the spring clamps and spacer bars
Wooden worktops
^ Position the spring clamps supplied
a and spacer bars b on the top
edge of the cut-out in the positions
marked.
^ Secure the spring clamps and
spacer bars with the 3.5 x 25 mm
screws supplied.
34
Fixing the spring clamps and spacer bars
Granite and marble worktops
The screws are not required for
granite or marble worktops.
^ Apply silcone to the side edges and
the lower edges of the spring clamps
a and spacer bars b.
^ Then fill gap e between the spacer
bars and the worktop with silicone
from the tube supplied.
^ Position and secure the spring
clamps a and spacer bars b using
strong, double-sided adhesive tape
c.
35
Installing the appliance(s)
^ Feed the connection cable down
^ Starting at the front, position the next
through the cut-out.
appliance in the worktop cut-out.
^ Starting at the front, position the
^ Connect each appliance to the mains
appliance in the worktop cut-out.
(see "Electrical connection").
^ Using both hands, press down
evenly on the sides of the appliance
until it clicks into position. When
doing this make sure that the seal
under the appliance sits flush with
the worktop on all sides. This is
important to ensure an effective seal
all round. Do not use sealant.
^ Check that each appliance works
correctly.
Once installed, the hob can be
removed using a special tool.
It can also be pushed up out of the
cut-out from below. It must be
pushed up from the back first.
When installing several appliances, a
sealing strip must be fitted into each
spacer bar.
^ Push the appliance to the side until
the long slots in the spacer bar can
be seen.
^ Fit the sealing strip d into the long
slots in the spacer bar b.
36
General installation tips
Tiled worktop
Do not use any sealant unless
expressly instructed to do so. The
sealing strip under the edge of the top
part of the appliance provides a
sufficient seal for the worktop.
Grout lines a and the hatched area
underneath the appliance must be
smooth and even. If they are not, the
appliance frame will not sit flush with
the worktop and the sealing strip will
not provide a good seal between the
appliance and the worktop.
Do not use sealant between the
frame of the top part of the
appliance and the worktop.
This could cause difficulties if the
appliance ever needs to be taken
out for servicing and possibly result
in damage to the frame or the
worktop.
37
Electrical connection
Connection should be made via a fused
plug and switched socket or a double
pole fused spur connection unit, or a
suitable isolator (as appropriate) which
complies with national and local safety
regulations and the on/off switch should
be easily accessible after the appliance
has been built in.
All electrical work should be carried
out by a suitably qualified and
competent person in strict
accordance with current local and
national safety regulations (BS 7671
in the UK).
If the connection cable is damaged,
it must be replaced by a suitably
qualified electrician with a special
connection cable of type H 05 V V-F
(pvc insulated), available from Miele.
If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
For extra safety it is advisable to install
a suitable residual current device
(RCD).
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
When switched off there must be an
all-pole contact gap of at least 3 mm in
the isolator switch (including switch,
fuses and relays).
unauthorised work.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Important U.K.
The appliance is supplied for
connection to a 230-240 V, 50 Hz
supply with a 3-core cable.
The appliance must only be
operated when built-in. This is to
ensure that all electrical parts are
shielded. Live parts must not be
exposed.
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth
Do not connect the appliance to the
mains electricity supply by an
extension lead. These do not
guarantee the required safety of the
appliance.
Blue
= neutral
= live
Brown
WARNING
Please make sure that the connection
data quoted on the data plate match
the household mains supply.
THIS APPLIANCE MUST BE
EARTHED
38
Electrical connection
Important
The electrical safety of this appliance
can only be guaranteed when
continuity is complete between the
appliance and an effective earthing
system, which complies with local and
national regulations. It is most important
that this basic safety requirement is
present and tested regularly and if
there is any doubt the electrical wiring
in the home should be inspected by a
qualified electrician. The manufacturer
cannot be held liable for the
consequences of an inadequate
earthing system such as an electric
shock.
The manufacturer cannot be held
liable for damage which is the direct
or indirect result of incorrect
installation or connection.
39
After sales service, data plate
In the event of any faults which you cannot remedy yourself, or if the appliance is
under guarantee, please contact:
– Your Miele dealer, or
– the Miele Customer Contact Centre (see back cover for address).
Please note that telephone calls may be monitored and recorded to improve
our service.
When contacting Miele, please quote the model and serial number of your
appliance which are given on the data plate.
N.B. A call-out charge will be applied for service visits where the problem
could have been resolved as described in these instructions.
Space in which to stick the extra data plate supplied with the appliance. Ensure
that the model number is the same as the one on the front of these instructions.
40
41
42
43
Alteration rights reserved/ 2110
M.-Nr. 07 180 420 / 09
|