User’s Guide
W1934S
W2234S
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
Important Precautions
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
A2
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1.
Place the monitor with its front facing downward on a soft cloth.
2.
Check the direction of the Stand Body, and connect it into the Hinge Body as shown in the
picture.
Hinge Body
Stand Body
3
.
Check the direction of the Stand Base, and connect it into the Stand Body.
Once assembled take the monitor up carefully and face the front side
4.
Stand Body
Stand Base
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
A3
Connecting the Display
Disassembling the stand
1. Put a cushion or soft cloth on aflat
2. Place the monitor face Down on
surface.
the cushion or soft cloth.
Stand Base
Part
Head Part
3. Hold the Head Part with one hand and
hold the Stand Base Part with the other
as shown in the picture and pull the
Stand Base Part lightly upward
4. Pushing Latch inside, Take the
stand base from stand body.
5. Please pull the stand body lightly to separate it from the hinge body.
A4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees.
A5
Connecting the Display
Using the Computer
1. Make sure to turn off the computer and product.
1
2
Connect Signal cable
signal cable.
and Power cord
in order, then tighten the screw of the
A
B
Connect Dsub Cable (PC)
Connect Dsub Cable (Mac)
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard
compliance for the product.
Signal Cable
Power Cord
1
2
Varies according to model.
PC
Wall-outlet type
MAC
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed
to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
2. Press
button on the front switch panel to turn the
power on. When monitor power is turned on, the 'Self
Image Setting Function' is executed automatically.
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically
adjusts the display to optimal settings for individual input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred
letters, screen flicker or tilted screen while using the device or after changing screen
resolution, press the AUTO/SET function button to improve resolution.
A6
Control Panel Functions
Front Panel Controls
6
5
It allows you to adjust the size of screen you are watching
now.
4 : 3 in Wide
Button
• WIDE : Switch to full screen mode according to input
image signal.
• 4 : 3 : Change the image signal ratio into 4:3.
4 : 3 IN WIDE
4 : 3
4 : 3 IN WIDE
WIDE
WIDE mode
4 : 3 display mode
Use this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED
MENU Button
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
A7
Control Panel Functions
Use these buttons to select or adjust functions in the On
Screen Display.
Buttons
LightView hot key
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
DAY
NIGHT
• DAY : Bright ambient illumination
• NIGHT : Dark ambient illumination
• TEXT : For text images (Word processing etc.)
• MOVIE : For animation images in videos
or movies
• PHOTO : For pictures or drawings
•
NORMAL : This is under normal operating
conditions
Use this button to enter a selection in the On Screen
Display.
AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
- W1934S : 1440 x 900
- W2234S : 1680 x 1050
Use this button to turn the display on or off.
Power Button
This Indicator lights up blue when the display operates
normally(On Mode). If the display is in Sleep Mode
(Energy Saving), this indicator color changes
to amber.
Power Indicator
A8
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the
or
Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the
/
Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Button once to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A9
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu
Sub menu
Reference
To adjust the brightness,
contrast and gamma of the
screen
PICTURE
BRIGHTNESS
CONTRAST
GAMMA
PRESET sRGB
6500K
COLOR
To customize the color of the
screen
9300K
RED
GREEN
BLUE
HORIZONTAL
VERTICAL
CLOCK
POSITION
To adjust the position of the
screen
TRACKING
To improve the clarity and
stability, sharpness of the
screen
PHASE
SHARPNESS
LANGUAGE
SETUP
To customize the screen
status for a user's operating
environment
HORIZONTAL
OSD
POSITION
VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
: Adjustable
NOTE
The order of icons may differ depending on the model (A10~A14).
A10
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
P I C T U R E
Sub-menus
Icons
Button Tip
MENU
SET
: Exit
: Adjust (Decrease/Increase)
: Enter
: Select another sub-menu
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
A11
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
Adjusts the brightness of the screen.
Adjusts the contrast of the screen.
BRIGHTNESS
P I C T U R E
CONTRAST
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
COLOR
Selects the color temperature.
• sRGB: Set the screen color to fit the
sRGB standard color
PRESET
C O L O R
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
RED
Adjusts red color levels.
Adjusts green color levels.
Adjusts blue color levels.
GREEN
BLUE
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
A12
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
POSITION
P O S I T I O N
Adjusts the screen image left and right.
Adjusts the screen image up and down.
HORIZONTAL
VERTICAL
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
TRACKING
T R A C K I N G
CLOCK
Adjusts any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
PHASE
Adjusts the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
text.
MENU : Exit
SHARPNESS Adjust the clearness of the screen.
: Decrease
: Increase
SET : Select another sub-menu
A13
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
SETUP
S E T U P
To choose the language in which the
control names are displayed.
LANGUAGE
OSD
POSITION
To adjust position of the OSD window
on the screen.
S E T U P
If the output of the video card is
different the required specifications, the
color level may deteriorate due to
video signal distortion. Using this
function, the signal level is adjusted to
fit into the standard output level of the
video card in order to provide the
optimal image.
WHITE
BALANCE
Activate this function when white and
black colors are present in the screen.
MENU : Exit
: Adjust
: Adjust
SET : Select another sub-menu
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
POWER
INDICATOR
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
Restore all factory default settings except
FACTORY
RESET
"LANGUAGE."
Press the
button to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
A14
Troubleshooting
Check the following before calling for service.
No image appears
G Is the power cord of the
•
•
•
Check and see if the power cord is connected
properly to the power outlet.
display connected?
G Is the power on and the
power indicator blue or
green?
Adjust the brightness and the contrast.
G Is the power indicator
If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
amber?
• Try to turn on the PC
.
G Do you see an "OUT OF
RANGE" message on
the screen?
•
•
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
G Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
Do you see a "OSD LOCKED" message on the screen?
G
Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
A15
Troubleshooting
Display image is incorrect
G Display Position is
•
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
incorrect.
•
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
G On the screen
background, vertical
bars or stripes are
visible.
•
•
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
G Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
Important
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10.
If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounter
problems such as blurred letters, blurry screen, cut-off screen display or tilted screen.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer
.
A16
Troubleshooting
Display image is incorrect
G The screen color is
•
•
•
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
the slot.
Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
mono or abnormal.
•
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
G The screen blinks.
Have you installed the display driver?
G
Have you installed the
display driver?
•
Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
•
Make sure to check if the video card supports
Plug&Play function.
G
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
A17
Specifications
W1934S
Display
19 inches (48 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 48 cm
0.285 mm pixel pitch
Horizontal Freq.
Vertical Freq.
Input Form
30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate Sync.
Sync Input
SOG (Sync On Green)
Signal Input
Input Form
15 pin D-Sub Connector
Video Input
RGB Analog (0.7 Vp-p/ 75 ohm)
Max
Recommend
VESA 1440 x 900 @ 75 Hz
VESA 1440 x 900 @ 60 Hz
Resolution
Plug&Play
DDC 2B
:
≤
≤
36W(Typ.)
1 W
1 W
On Mode
Sleep Mode
Off Mode
Power
Consumption
With Stand
Without Stand
Dimensions
& Weight
Width 44.836 cm / 17.65 inches 44.836 cm / 17.65 inches
Height 37.575 cm / 14.79 inches 29.995 cm / 11.81 inches
Depth 18.30 cm / 7.20 inches
6.00 cm / 2.36 inches
3.2 kg (7.05 lbs)
-5˚~20˚
Weight(excl. packing)
Tilt
Range
AC 100-240V~ 50/60Hz 0.8A
Power Input
Operating Conditions
Environmental
Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type or PC-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
A18
Specifications
W2234S
Display
22 inches (55.8 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 55.8 cm
0.282 mm pixel pitch
Horizontal Freq.
Vertical Freq.
Input Form
30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate Sync.
Sync Input
SOG (Sync On Green)
Signal Input
Input Form
15 pin D-Sub Connector
Video Input
RGB Analog (0.7 Vp-p/ 75 ohm)
Max
Recommend
VESA 1680 x 1050 @ 60 Hz
VESA 1680 x 1050 @ 60 Hz
Resolution
Plug&Play
DDC 2B
:
≤
≤
40W(Typ.)
1 W
1 W
On Mode
Sleep Mode
Off Mode
Power
Consumption
With Stand
Without Stand
Dimensions
& Weight
Width 50.93 cm / 20.15 inches 50.93 cm / 20.15 inches
Height 43.13 cm / 16.98 inches 33.86 cm / 13.33 inches
Depth 20.60 cm / 8.11 inches
6.05 cm / 2.38 inches
4.7 kg (10.36 lbs)
-5˚~20˚
Weight(excl. packing)
Tilt
Range
AC 100-240V~ 50/60Hz 1.0A
Power Input
Operating Conditions
Environmental
Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type or PC-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
A19
Specifications
Preset Modes (Resolution)
W1934S
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
70
70
60
75
60
75
75
60
75
75
65
60
75
60
60
75
1
2
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
1440 x 900
1440 x 900
1440 x 900
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
68.681
61.805
63.981
79.976
55.469
55.935
70.635
VGA
VGA
3
VGA
4
VESA
VESA
VESA
MAC
5
6
7
8
VESA
VESA
MAC
VESA
VESA
VESA
VESA
VESA
VESA
9
10
11
12
13
14
*15
16
W2234S
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
VGA
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.290
70
60
75
60
75
60
75
75
60
75
60
60
VGA
VGA
VESA
VESA
VESA
VESA
VESA
VESA 1280 x 1024
10 VESA 1280 x 1024
11 VESA 1680 x 1050
*12 VESA 1680 x 1050
*Recommend Mode
Indicator
LED Color
MODE
Blue
Amber
Off
On Mode
Sleep Mode
Off Mode
A20
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or
the interchange device.
1. Put a cushion or soft cloth on aflat
2. Place the monitor face Down on
surface.
the cushion or soft cloth.
Stand Base
Part
Head Part
3. Hold the Head Part with one hand and
hold the Stand Base Part with the other
as shown in the picture and pull the
Stand Base Part lightly upward
4. Pushing Latch inside, Take the
stand base from stand body.
5. Please pull the stand body lightly to separate it from the hinge body.
A21
Installing the Wall mount plate
6. Install the Wall mount plate.
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount
plate is purchased.
Kensington Security Slot
Connected to a locking cable that
can be purchased separately at
most computer stores.
A22
Digitally yours
|