User’s Guide
M198WA
M208WA
M228WA
Make sure to read the Safety Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your dealer when you ask
for service.
Safety Precautions
Electrical Power Related Precautions
Warning
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
During a thunder or lightning storm, unplug the power cable or signal cable.
- You may be electrocuted or a fire can break out.
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet.
Use a power bar with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry
the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
Fix the power cable completely.
- If the power cable is not fixed completely, a fire can break out.
Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put
heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is
connected to the input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
- You may be electrocuted.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily
accessible after installation.
Caution
Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
Precautions in Moving the Product
Warning
Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
2
Safety Precautions
Caution
Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
Do not dispose the product-packing box. Use it when you move.
Make the panel face forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center
for repair.
Precautions in Using the Product
Warning
Do not disassemble, repair or modify the product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
Keep the product away from water.
- Fire or electric shock accident can occur.
Caution
Do not put or store inflammable substances near the product.
- There is a danger of explosion or fire due to careless handling of the inflammable substances.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
- The water can sink into the product, which can cause electric shock or serious malfunction.
Take a rest from time to time to protect your vision.
Keep the product clean at all times.
Take a comfortable and natural position when working with a product to relax the muscles.
Take a regular break when working with a product for a long time.
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make
a scratch on it.
Keep the proper distance from the product.
- Your vision may be impaired if you look at the product too closely.
Set the appropriate resolution and clock by referring to the User’s Guide.
- Your vision can be impaired.
Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)
- Product can be deformed.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
3
Before Connecting to the PC
Connecting the stand
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
1.
2.
3.
4.
Place the monitor with its front facing downward on a soft cloth.
Connect the Stand Base to the Stand Body and press latches at the button toward each end.
Connect the Stand, assembled in step 2, to the Monitor Panel until you hear a "Click".
Once assembled take the monitor up carefully and face the front side
Stand Body
Stand Base
2.
3.
Stand
Slot
Important
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
4
Before Connecting to the PC
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -3˚~10˚
Swivel : 350˚
Warning:
When adjusting the angle of the screen, do not put your
finger(s) in between the head of the monitor and the stand
body. You can hurt your finger(s).
Theft prevention locking device
COMPONENT IN
Locking Device
Use this locking cable (This has to be purchased
separately if required.) to prevent theft.
5
Name and Function of the Parts
Name of the Remote Control Buttons (A Type)
POWER
TV : TV button
INPUT
POWER
INPUT
TV
Input
Each time you press the Input button it will
change to
TV
AV1
AV2
TV
AV1
RGB
AV2
DVI.
Component
Component
RGB
DVI
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu.
LIST
Q.VIEW
OK
PSM
SSM
Number buttons
Able to directly select and change channel.
MUTE
TEXT
PR
OK
LIST : Programme list
To display the programme list (0~ 99).
Programme List
VOL
VOL
0
1
2
3
4
C
C
C
C
C
01
35
05
11
04
5
6
7
8
9
C
C
C
C
C
07
50
51
41
63
PR
OK MENU
Note: TV channels displayed in blue have been setup
to be skipped in the Programme Edit menu.
NOTE : In case of weak stereo
sound signals, with stereo or
Nicam stereo transmission,
select mono reception.
Q.VIEW : QUICK VIEW Button
To display the previously selected TV channel
Inserting batteries into remote control.
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent environmental pollution.
6
Name and Function of the Parts
Name of the Remote Control Buttons
PSM
SSM
MUTE
MUTE
TEXT
PR
OK
Switches the sound on or off.
PSM (Picture Status Memory) Button
Press repeatedly to select Dynamic, Standard, Mild, Game or User
picture mode.
VOL
VOL
SSM (Sound Status Memory) Button
Use this button to select the sound tone.
Press repeatedly to select Flat, Music, Movie, Sports, User sound tone.
PR
TEXT
To select the teletext on or off. The main index page or the last
selected page appears on the screen together with an information
headline and an option line at the bottom of the screen.
SIZE
MIX
TIME
HOLD
REVEAL
INDEX MODE
UPDATE
X
M
?
i
PR (
Able to change channel.
VOL ( ) Buttons
) Buttons
Able to adjust sound.
OK Button
Use when functional adjustment is completed.
MENU
Use this button to enter the On Screen Display menu.
SLEEP : SLEEP Timer
You can set a time period after which the
TV / AV / RGB / Component / DVI should switch itself to standby.
Press the key repeatedly to select the number of minutes.
_ _ _ (off)
240
10
20
30
90
60
180
120
7
Name and Function of the Parts
Name of the Remote Control Buttons
PSM
SSM
ARC
To select the image size of the screen.
MUTE
TEXT
•
When TV / AV mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2
PR
OK
• When RGB/DVI /Componentmode: 4:3, 16:9
I/II : Bilingual choice and sound mode selection
VOL
VOL
[TV]
To switch from Stereo to Mono sound in case of stereo transmission,
or from Nicam Stereo to Nicam Mono, in case of digital transmission.
to switch from Nicam Dual I to Nicam Dual II or Nicam Dual
I+II in case of Nicam Dual transmission.
to choose between Dual I, Dual II or Dual I+II in case of
bilingual transmission :
PR
Dual I sends the primary broadcast language to the
loudspeakers ;
SIZE
Dual II sends the secondary broadcast language to the
loudspeakers ;
MIX
TIME
HOLD
Dual I+II sends a separate language to each loudspeakers.
[AV / Component]
REVEAL
INDEX MODE
UPDATE
X
M
?
i
In AV/Component mode, you can select output sound for the left and
right loudspeakers. Repeatedly press the I/II button to
select the sound output.
L+R : Audio signal from audio L input is sent to left
loud-speaker and audio signal from audio R input is
sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and right
loud-speakers.
R+R : Audio signal from audio R input is sent to left and
right loud-speakers.
8
Name and Function of the Parts
Remote Control - Using the Teletext function
Please select your local teletext language. (page 30)
If you don't, the teletext may not appear correctly on the screen.
Yellow key
PSM
SSM
Favourite Program On : Rotate favourite channel
MUTE
TEXT
PR
OK
Favourite Program Off : To display the previously
selected TV channel.
VOL
VOL
HOLD
Press the button to stop the automatically rotating
of the sub pages. Press the button again to
continue the automatic rotating again.
PR
SIZE
Press the button repeatedly to display the upper
part, the lower part and then to return to the
normal page size.
SIZE
MIX
TIME
HOLD
REVEAL
INDEX MODE
UPDATE
X
M
?
i
MIX
Display the teletext pages superimposed on
the TV picture. To switch the TV picture off
press this button again.
TIME
Press this button to select a sub page number.
The sub page number is displayed at the
bottom of the screen. To hold or change the
sub page, press the RED/GREEN,
or
NUMBER buttons. Press again to exit this
function.
9
Name and Function of the Parts
Remote Control - Using the Teletext function
PSM
SSM
MUTE
TEXT
PR
OK
REVEAL
Press the button to reveal/conceal the hidden
information, such as solutions to riddles and
puzzles. Press this button again to remove the
information from the display.
VOL
VOL
PR
INDEX
To display the main index.
MODE
SIZE
MIX
TIME
HOLD
The mode will be switched in the Teletext mode.
REVEAL
INDEX MODE
UPDATE
X
M
?
i
UPDATE
Press the button to appear the TV programme.
At the top of screen indicates that you are still in the
teletext mode. Before interrupting teletext, you may
select a page number. When the page has been
found, the information line appears briefly on your
screen. Press the button again to reappear teletext.
10
Name and Function of the Parts
Name of the Remote Control Buttons(B Type)
TV : TV button
POWER
INPUT
TV
POWER
INPUT
MUTE
Input
PSM
SSM
I/II
Each time you press the Input button it will
change to
TV
TV
AV1
RGB
AV2
DVI.
Component
AV1
AV2
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu.
Component
RGB
DVI
OK
LIST
Q.VIEW
MUTE
Switches the sound on or off.
PR
OK
PSM (Picture Status Memory) Button
Press repeatedly to select Dynamic, Standard, Mild, Game or User
picture mode.
VOL
VOL
SSM (Sound Status Memory) Button
Use this button to select the sound tone.
PR
Press repeatedly to select Flat, Music, Movie, Sports, User sound tone.
MENU
SLEEP
ARC/*
TEXT
Number buttons
Able to directly select and change channel.
HOLD
REVEAL
MIX
SIZE
TIME
NOTE : In case of weak stereo sound signals, with stereo or Nicam stereo
transmission, select mono reception.
X
?
i
M
INDEX
UPDATE
MODE
11
Name and Function of the Parts
Name of the Remote Control Buttons
I/II : Bilingual choice and sound mode selection
POWER
[TV]
INPUT
TV
To switch from Stereo to Mono sound in case of stereo transmission,
or from Nicam Stereo to Nicam Mono, in case of digital transmission.
to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II in
case of Nicam Dual transmission.
MUTE
PSM
SSM
I/II
to choose between Dual I, Dual II or Dual I+II in case of bilingual
transmission :
Dual I sends the primary broadcast language to the loudspeakers ;
Dual II sends the secondary broadcast language to the loudspeakers ;
Dual I+II sends a separate language to each loudspeakers.
[AV / Component]
In AV/Component mode, you can select output sound for the left and
right loudspeakers. Repeatedly press the I/II button to
select the sound output.
LIST
Q.VIEW
L+R : Audio signal from audio L input is sent to left
loud-speaker and audio signal from audio R input is
sent to right loud-speaker.
PR
OK
VOL
VOL
L+L : Audio signal from audio L input is sent to left and right
loud-speakers.
R+R : Audio signal from audio R input is sent to left and
right loud-speakers.
PR
MENU
SLEEP
ARC/*
TEXT
LIST : Programme list
To display the programme list (0~ 99).
Programme List
0
1
2
3
4
C
C
C
C
C
01
35
05
11
04
5
6
7
8
9
C
C
C
C
C
07
50
51
41
63
HOLD
REVEAL
MIX
SIZE
TIME
X
?
i
M
INDEX
UPDATE
MODE
OK MENU
Note: TV channels displayed in blue have been setup
to be skipped in the Programme Edit menu.
Q.VIEW : QUICK VIEW Button
To display the previously selected TV channel
12
Name and Function of the Parts
Name of the Remote Control Buttons
LIST
Q.VIEW
PR (
Able to change channel.
VOL ( ) Buttons
) Buttons
PR
OK
VOL
VOL
Able to adjust sound.
OK Button
Use when functional adjustment is completed.
PR
MENU
SLEEP
ARC/*
TEXT
MENU
Use this button to enter the On Screen Display menu.
SLEEP : SLEEP Timer
You can set a time period after which the
HOLD
MIX
SIZE
TIME
TV / AV / RGB / Component / DVI should switch itself to standby.
Press the key repeatedly to select the number of minutes.
X
?
REVEAL
i
M
INDEX
UPDATE
MODE
_ _ _ (off)
10
20
30
90
60
240
180
120
ARC
To select the image size of the screen.
•
When TV / AV mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2
• When RGB/DVI /Componentmode: 4:3, 16:9
TEXT
To select the teletext on or off. The main index page or the last
selected page appears on the screen together with an information
headline and an option line at the bottom of the screen.
13
Name and Function of the Parts
Remote Control - Using the Teletext function
Please select your local teletext language. (page 30)
If you don't, the teletext may not appear correctly on the screen.
Yellow key
Favourite Program On : Rotate favourite channel
Favourite Program Off : To display the previously
LIST
Q.VIEW
selected TV channel.
PR
OK
VOL
VOL
HOLD
Press the button to stop the automatically rotating
of the sub pages. Press the button again to
continue the automatic rotating again.
PR
MENU
SLEEP
ARC/*
TEXT
SIZE
Press the button repeatedly to display the upper
part, the lower part and then to return to the
normal page size.
HOLD
MIX
SIZE
TIME
X
?
REVEAL
i
M
INDEX
UPDATE
MODE
MIX
Display the teletext pages superimposed on
the TV picture. To switch the TV picture off
press this button again.
TIME
Press this button to select a sub page number.
The sub page number is displayed at the
bottom of the screen. To hold or change the
sub page, press the RED/GREEN,
or
NUMBER buttons. Press again to exit this
function.
14
Name and Function of the Parts
Remote Control - Using the Teletext function
LIST
Q.VIEW
REVEAL
PR
OK
Press the button to reveal/conceal the hidden
information, such as solutions to riddles and
puzzles. Press this button again to remove the
information from the display.
VOL
VOL
PR
INDEX
MENU
SLEEP
ARC/*
TEXT
To display the main index.
MODE
HOLD
MIX
SIZE
TIME
The mode will be switched in the Teletext mode.
X
?
REVEAL
i
M
INDEX
UPDATE
MODE
UPDATE
Press the button to appear the TV programme.
At the top of screen indicates that you are still in the
teletext mode. Before interrupting teletext, you may
select a page number. When the page has been
found, the information line appears briefly on your
screen. Press the button again to reappear teletext.
15
Name and Function of the Parts
Rear View
AUDIO
(RGB/DVI) IN
DVI IN
RGB(PC/DTV) IN
ANTENNA IN
L
R
S-VIDEO
AUDIO
(MONO)
VIDEO
AV1
H/P
AV IN
2
P
B
PR
Y
L
R
VIDEO
COMPONENT IN
AUDIO
AUDIO
(RGB/DVI) IN
DVI IN
RGB(PC/DTV) IN
ANTENNA IN
L
R
S-VIDEO
AUDIO
(MONO)
VIDEO
AV1
H/P
AV IN 2
P
B
PR
Y
L
R
VIDEO
COMPONENT IN
AUDIO
Power Connector : Connect the power cord.
SCART Input/Output Terminal
AV Input Terminal
DVI Digital Signal Connector
D-Sub Analog Signal Connector
RGB, DVI Sound Jack : Connect to the jack in the PC sound card or D-TV sound Output Jack.
TV Tuner Jack : Connect the antenna.
Headphone/Earphone Connection Terminal
Component Input Terminal
16
Name and Function of the Parts
AV Input Terminal
L
R
S-VIDEO
AUDIO
(MONO)
VIDEO
AV IN 2
Video Input Terminal
Audio Input Terminal
S-Video Input Terminal
17
Connecting to External Devices
Connecting to your PC
First of all, see if the computer, product and the peripherals are turned off.
Then, connect the signal input cable.
1.
Rear side of the product.
A
UDIO
DVI IN
RGB(PC/DTV) IN
(RGB/DVI) IN
ANTENNA IN
L
R
S-VIDEO
AUDIO
(MONO)
VIDEO
AV1
H/P
AV
IN
2
Y
P
B
P
R
L
R
VIDEO
COMPONENT IN
AUDIO
Connecting with the D-Sub signal input cable.
A
RGB(PC/DTV) IN
Rear side of the product
.
Macintosh Adapter (Not included)
Use the standard Macintosh adapter since an
incompatible adapter is available in the market.
(Different signaling system)
Connecting with the DVI signal input cable.
B
DVI IN
Rear side of the product.
Connect the audio cable.
2.
AUDIO
Audio cable
(RGB/DVI) IN
Rear side of the product.
•
Make sure to check the sound card connection terminal in the PC before connecting to the product.
If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper
or the PC application. (For more details, refer to the sound card user’s guide.)
- Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier.
- *Line Out : The terminal connected to the speaker equipped with an amplifier.
If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated
with an amplifier.
18
Connecting to External Devices
Connect the power cord.
3.
Rear side of the product.
AUDIO
(RGB/DVI) IN
DVI IN
RGB(PC/DTV) IN
ANTENNA IN
L
R
S-VIDEO
AUDIO
(MONO)
VIDEO
AV1
H/P
AV IN
2
P
B
P
R
L
R
Y
VIDEO
COMPONENT IN
AUDIO
Turn on power by pressing the power button on the product.
1
4.
5.
Power button
Turn on the PC.
2
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT OK
Or, press the INPUT button at the top side of the product.
INPUT OK
•
Select RGB
A
Input
Input
•
Select DVI
B
TV
TV
AV1
AV1
AV2
AV2
Component
RGB
DVI
Component
RGB
DVI
OK
OK
Each time you press the Input button it will change to TV
Component RGB DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
AV1
AV2
Note
• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
19
Connecting to External Devices
Connecting to VCR/DVD
Connect the video/audio cable as shown in the figure below and then connect the power
cord (See page 19).
1.
When using the S-Video cable.
A
When using the RCA cable.
B
•
Connect to the S-Video input terminal to
•
Connect the input terminal with a
watch high image quality movies.
proper colour match.
Rear side of the Product
Rear side of the Product
L
R
S-VIDEO
L
R
S-VIDEO
AUDIO
AUDIO
(MONO)
(MONO)
VIDEO
VIDEO
AV IN 2
AV IN 2
S-Video Cable
(Not included)
RCA Cable
RCA Cable
(Not included)
(Not included)
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
VCR/DVD
VCR/DVD
Note
• In case the RCA cable is connected simultaneously as S-Video cable is connected, S-Video cable is first.
20
Connecting to External Devices
When using the SCART cable.
C
Rear side of the Product
AV1
SCART Cable
Please, use shielded scart cable.
(Not Included)
VCR / DVD
Select an input signal.
2.
Press the INPUT button on the remote control to select the input signal.
INPUT
Or, press the INPUT button at the top side of the product.
INPUT OK
OK
When connecting with a SCART cable.
When connecting with a RCA cable.
C
A
B
•
Select AV2
When connecting with a S-Video cable.
Select AV2
•
Select AV1
•
Input
Input
TV
AV1
AV2
TV
AV1
AV2
Component
RGB
DVI
Component
RGB
DVI
OK
OK
Each time you press the Input button it will change to TV
Component RGB DVI
AV1
AV2
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
21
Connecting to External Devices
Connecting to Set-top Box /DVD (480p/576p/720p/1080i/480i/576i)
Connect the video/audio cable as shown in the figure below and then connect the power
cord (See page 19).
1.
•
Connect the input terminal with a proper colour match.
Rear side of the Product
PB
PR
Y
L
R
VIDEO
AUDIO
COMPONENT IN
Component Cable
(Not included)
Audio Cable
(Not included)
Pb
Pr
Y
L
R
VIDEO
COMPONENT IN
AUDIO
Set-top Box /DVD
Select an input signal.
2.
Press the INPUT button on the remote control to select the input signal.
INPUT OK
Or, press the INPUT button at the top side of the product.
INPUT
OK
Input
TV
AV1
•
Select Component
AV2
Component
RGB
DVI
OK
Each time you press the Input button it will change to TV
Component RGB DVI
AV1
AV2
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
22
Connecting to External Devices
When watching RGB/DVI from the DVD/Set-top Box
Connect the D-sub cable, RCA/PC cable as shown in the below figure
and then connect the power cord. (see page 19)
1.
A
B
[Rear side of the Product]
[Rear side of the Product]
AUDIO
(RGB/DVI) IN
AUDIO
DVI IN
RGB(PC/DTV) IN
RGB(PC/DTV) IN
(RGB/DVI) IN
RCA-Stereo cable
(not included)
RCA-Stereo cable
(not included)
DVI cable
D-Sub cable
[Set-top Box/DVD]
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT OK
Or, press the INPUT button at the top side of the product.
INPUT OK
[Set-top Box/DVD]
2.
Input
•
Select DVI
Input
B
•
Select RGB
A
TV
AV1
AV2
TV
AV1
AV2
Component
RGB
DVI
Component
RGB
DVI
OK
OK
Each time you press the Input button it will change to TV
Component RGB DVI
AV1
AV2
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
23
Connecting to External Devices
When Watching TV
1.
Check if the antenna cable is connected at the rear side of the product
and then, connect the power cord.
Rear Side of the Product
AUDIO
(RGB/DVI) IN
DVI IN
RGB(PC/DTV) IN
ANTENNA IN
L
R
S-VIDEO
AUDIO
(MONO)
VIDEO
AV1
H/P
AV IN
2
P
B
PR
Y
L
R
VIDEO
COMPONENT IN
AUDIO
ANTENNA IN
Antenna Cable
(Not included.)
2.Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
OK
Or, press the INPUT button at the top side of the product.
Input
INPUT
Select TV
OK
TV
AV1
•
AV2
Component
RGB
DVI
OK
Each time you press the Input button it will change to TV
Component RGB DVI
AV1
AV2
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
24
To arrange cables using cable management
Arrange the cables in the center as shown in the following picture.
1.
AUDIO
(RGB/DVI) IN
DVI IN
RGB(PC/DTV) IN
ANTENNA IN
R
VIDEO
O
V
AV1
H/P
2
P
B
PR
Y
L
R
DEO
COMPONENT IN
AUDIO
Fit the cable management to the Holder Groove downwards.
2.
ANTENNA IN
R
VIDEO
IO
AV1
H/P
2
P
B
PR
Y
L
R
IDEO
COMPONENT IN
AUDIO
cable
H
S
U
P
management
T
N
E
EM
G
A
A
N
B
L
E
M
C
A
* When you want remove it.
H
S
PU
PUSH
GEMENT
A
M
A
N
L
E
C
A
B
GEMENT
A
A
N
M
L
E
C
A
B
Push up slightly to remove it.
Push down slightly.
Warning
• Do not use the cable management as a handle for the Monitor.
• Do not press the cable management.
25
Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
A
UDIO
DVI IN
RGB(PC/DTV) IN
(RGB/DVI) IN
ANTENNA IN
L
R
S-VIDEO
AUDIO
(MONO)
VIDEO
AV1
H/P
AV
IN
2
Y
P
B
P
R
L
R
VIDEO
COMPONENT IN
AUDIO
INPUT MENU
OK
VOL
PR
• This Indicator lights up blue when the display operates normally
(On Mode). If the display is in Sleep (Energy Saving) Mode, this
indicator colour changes to amber.
Power Indicator
Power Button
• Use this button to turn the product on and off.
• Use this button to show/hide the OSD (On Screen Display) menu
screen.
MENU Button
•
Use this button to select an icon or adjust the setting in the OSD screen.
OSD Select/Adjust Button
• Use this button to control the channel for the TV signal.
Volume
• Adjust the volume.
30
26
Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
• OK button is usually used in choosing the MENU.
OK Button
When there is no MENU on the screen pushing the OK button will
give the information about the current input source.
Input
INPUT Button
TV
Television
TV
AV1
AV2
Component
RGB
DVI
SCART
CVBS, S-Video
HDTV, DVD
D-Sub analog signal
DVI Digital signal
AV1
AV2
Component
RGB
DVI
OK
Each time you press the Input button it will change to TV
Component RGB DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
AV1
AV2
IR Receiver
• The unit that receives the signal from the remote control.
27
Adjusting the Screen
OSD (On Screen Display) Menu
Icon
Function Description
Set/Select the channel when using the TV
Station
Picture
Sound
Adjusting the picture function.
Adjusting the sound function.
Adjusting the time function.
Selecting the special function.
Time
Special
Screen
Adjusting the screen function.
Note
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently since it provides graphical
presentation.
28
Adjusting the Screen
OSD (On Screen Display) Screen Tracking Order
PR
PR
A type
OK
OK
OK
OK
VOL
VOL
VOL
VOL
PR
PR
Pop up the
menu screen
Move where
you want to
adjust
Select a menu icon
Adjust the status
Save
adjustment
Exit from the
menu screen.
•
Use the remote control to adjust the OSD screen.
B type
PR
PR
MENU
MENU
VOL
VOL
VOL
OK
OK
OK
VOL
OK
PR
PR
Pop up the
menu screen
Move where
you want to
adjust
Select a menu icon
Adjust the status
Save
adjustment
Exit from the
menu screen.
•
Use the remote control to adjust the OSD screen.
1
2
3
4
5
6
Press the MENU Button, then the main menu of the OSD will appear.
To access a control, use the
Buttons.
When the icon you want becomes highlighted, press the OK Button.
Use the
Buttons to adjust the item to the desired level.
Accept the changes by pressing the OK Button.
Exit the OSD by pressing the MENU Button repeatedly
.
29
Adjusting the Screen
On-Screen Menu Language / Country Selection
Installation guide menu appears on product screen when it is turned on for the first time.
Installation guide
Language
Chesky
Dansk
Nederlands
Norsk
Deutsch
English
Español
Français
Italiano
Magyar
Polski
Português
–”——K»…
Romaneste
suomi
Svenska
OK MENU
1. Press the
2. Press the
button and then, OK button to select your desired language.
button and then, OK button to select your country.
* If you want to change Language/ Country selection
1. Press the MENU button and then
button to select the Special menu.
2. Press the button and then
button to select Language.
The menus can be shown on the screen in the selected language.
Or, Press the button and then
3. Press the button and then
4. Press the OK button.
button to select Country.
button to select your desired language or country.
5. Press the MENU button repeatedly to return to normal TV viewing.
Note
•
If you don't finish set up Installation Guide by pressing MENU button or time out of OSD
(On Screen Display) display, it will continuously appear until completing set up whenever
the set is turned on.
•
•
If you select wrong local country, the teletext may not appear correctly on the screen and
some problem may happen during teletext operation.
Hebrew is added to Country of Installation Guide according to the countries which using
Hebrew languages.
30
Adjusting the Screen
STATION ID set/Select the channel when using the TV
Auto programme
Station
Auto programme
Manual programme
Programme edit
To set
Favourite programme
OK MENU
System
It should be set before run auto searching.
Press the
buttons to select the TV system of the country or part of the
world from where you want to receive the TV channels.
* Supporting channel : C(V/UHF 02~69) S(Cable 01~41)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K/Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
L: SECAM L/L' (France)
Storage
from
To select a programme number or enter the programe number with the
number buttons from where you want to start searching for new channels.
If e.g. you want to keep the channels 1 to 10 stored earlier, enter programe
number 11. Your TV search for new channels from number 11 onwards.
* Numbers available to store : 0~99
Press OK or
button to start automatic programming. All available TV
Search
channels will be searched and stored automatically. To stop auto
programming, press the MENU button. When auto programming is
completed, the programme list menu appears.
Manual programme
Station
Auto programme
Manual programme
Programme edit
To change the channel.
(Change each item in Manual
Program and press the "MENU"
button to save the settings)
To set
Favourite programme
OK MENU
Press the
buttons to select the channel number or enter the
Storage
System
programme number with the number buttons in where you want to store
channel.
Press the
buttons to select the TV system of the country or part of
the world from where you want to receive the TV channels.
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K/Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
L: SECAM L/L' (France)
31
Adjusting the Screen
STATION ID set/Select the channel when using the TV
Press the
cable channels.
buttons to select VHF/UHF for aerial channels or Cable for
Band
To select the channel reception type. : VHF/UHF / Cable.
If you know the channel number, enter it directly with the digit buttons 0 to 9.
Channel
Fine
In case of poor reception, you can improve the reception by fine tuning. Use
the
buttons to fine tune for the best picture and sound.
Search
Name
Use the
buttons to search next channel backward or forward direction.
To see the assigned channel name.
It is possible to change the name stored in the memory or to assign a name
to a TV channel which has not yet been entered. A name with up 5 letters or
numbers can be given to the programme numbers 0 to 99.
Press the
buttons to move cursor to be changed. -> Press the
buttons to select a character.(space, number 0~9, and alphabet A~Z, +,-) ->
Press OK button or MENU button.
Programme edit
Programme edit
Station
0
1
2
3
4
C
C
C
C
C
01
35
05
11
04
5
6
7
8
9
C
C
C
C
C
07
50
51
41
63
Auto programme
Manual programme
Programme edit
To set
Favourite programme
Delete
Move
Copy
Skip
OK MENU
OK MENU
Press the
buttons to select a TV channel to be deleted. ->
Delete
Press the red key on the remote control -> The background colour of
the selected channel will change to red.
Press the Delete button one more time to delete the selected channel.
All the following channels are shifted up one position.
Copy
Move
Press the
buttons to select a TV channel to be copied. ->
Press the green key on the remote control. All the following channel
numbers are shifted down one position.
Press the
buttons to select a channel number to be moved. ->
Press the yellow key on the remote control. -> Press the
buttons to move the TV channel to the desired channel number. ->
Press the yellow key again to release this function.
Skip
Press the
buttons to select a channel number to be skipped. ->
Press the blue key on the remote control. The skipped TV channel is
displayed in blue.
32
Adjusting the Screen
STATION ID set/Select the channel when using the TV
Station
Favourite
programme
Off
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _ _ _ _
_ _ _ _ _
_ _ _ _ _
_ _ _ _ _
_ _ _ _ _
_ _ _ _ _
_ _ _ _ _
_ _ _ _ _
Auto programme
Manual programme
Programme edit
Favourite programme
OK MENU
This function lets you select your favourite programmes directly. (8 channel)
Press the
buttons to select a channel.
*
Yellow key (remote control) :
Favourite Program On : Rotate favourite channel
Favourite Program Off : To display the previously selected TV channel.
33
Adjusting the Screen
PICTURE ID adjust the picture function(RGB/DVI)
PSM
The PSM function automatically adjusts the screen
image quality.
Picture
• Dynamic
Dynamic
Standard
Mild
PSM
CSM
XD
Cinema
Reset
Select this option to display with a sharp image.
• Standard
The most general and natural screen display status.
• Mild
Game
User
Select this option to display with a mild image.
• Game
OK MENU
Select this option to enjoy dynamic image when
playing a game.
• User
Select this option to use the user-defined settings.
CSM
The CSM function automatically adjusts the screen
colour set.
Picture
• 9300K
Slightly purplish white.
• 6500K
Slightly bluish white.
• sRGB
Slightly lower brightness.
• User
Select this option to use the user-defined settings.
Red / Green / Blue
PSM
CSM
XD
Cinema
Reset
9300K
6500K
sRGB
User
OK MENU
Set your own colour levels.
XD
XD is LG Electronics unique picture improving
technology to display a real HD source through an
advanced digital signal processing algorithm.
It's not available to use this function in RGB-PC or
DVI-PC modes.
Picture
PSM
CSM
XD
Cinema
Reset
Auto
Manual is activated after selecting the user of PSM.
(It's not working RGB-PC, DVI-PC mode.)
Manual
OK MENU
Cinema
Reset
(
Function works in the following mode -TV, AV, Component 480i/576i)
When you watch the movie, this function adjusts the set to the best picture appearance.
(It's not working RGB/DVI mode.)
Return to the default settings PSM, CSM, XD, Cinema at the factory.
34
Adjusting the Screen
PICTURE ID adjust the picture function (TV/Video)
PSM
The PSM function automatically adjusts the screen
image quality.
Picture
• Dynamic
Dynamic
Standard
Mild
PSM
CSM
XD
Cinema
Reset
Select this option to display with a sharp image.
• Standard
The most general and natural screen display status.
• Mild
Game
User
Select this option to display with a mild image.
• Game
OK MENU
Select this option to enjoy dynamic image when
playing a game.
• User
Select this option to use the user-defined settings.
CSM
The CSM function automatically adjusts the screen
Picture
colour set.
• Cool
Slightly purplish white.
• Normal
Slightly bluish white.
• Warm
PSM
CSM
XD
Cinema
Reset
Cool
Normal
Warm
User
Slightly reddish white.
• User
OK MENU
Select this option to use the user-defined settings.
Red / Green / Blue
Set your own colour levels.
XD
Picture
XD is LG Electronics unique picture improving
technology to display a real HD source through an
advanced digital signal processing algorithm.
It's not available to use this function in RGB-PC or
DVI-PC modes.
PSM
CSM
XD
Cinema
Reset
Auto
Manual is activated after selecting the user of PSM.
Manual
OK MENU
Cinema
Reset
(
Function works in the following mode - TV, AV, Component 480i/576i)
When you watch the movie, this function adjusts the set to the best picture appearance.
Return to the default settings PSM, CSM, XD, Cinema at the factory.
OK MENU
35
Adjusting the Screen
SOUND ID to adjust the sound function
Sound
Flat
SSM
AVL
Balance
Music
Movie
Sports
User
0
OK MENU
The best sound tone quality will be selected automatically depending on the video type that
you're currently watching.
SSM
• Flat : The most commanding and natural audio.
• Music : Select this option to enjoy the original sound when listening to the music.
• Movie : Select this option to enjoy sublime sound.
• Sports : Select this option to watch sports broadcasting.
• User : Select this option to use the user-defined audio settings.
AVL
To adjust uneven sound volumes across all channels or signals automatically to the most
appropriate level. To use this feature, select On.
Use this function to balance sound from the left and right speakers.
Balance
36
Adjusting the Screen
TIME ID to adjust the time function
Time
-- : --
Clock
Off time
On time
Auto sleep
OK MENU
This function is used to set up of current time.
You must set the time correctly before using On/Off time function.
Clock
1) Press the MENU button and then use
button to select the TIME menu.
2) Press the
button and then use
button and then use
button and then use
button to select the Clock menu.
button to set the hour(00~23).
button to set the minutes(00~59).
3
) Press
) Press
4
The default value is -- : --.
5) Press the OK/MENU button to save.
The Off time automatically switches the set to off mode at the pre-set time.
Off/On time
1) Press the MENU button and then use
button to select the TIME menu.
button to select Off time or On time.
button to set the hour(00~23).
button to set the minutes(00~59).
button to select On or Off.
2) Press the
3) Press the
4) Press the
5) Press the
button and then use
button and then use
button and then use
button and then use
6) Only On time function; Press the
and programme number
7) Press the OK/MENU button to save.
button and then
button to adjust volume level
.
If Auto sleep is active and there is no input signal, the set switches to off mode
automatically after 10 minutes. ( It is not working in PC)
Auto sleep
1) Press the MENU button and then use
2) Press the button and then use
3) Press the OK/MENU button to save .
button to select the Auto sleep menu.
button to select On or Off.
• In the event of power interruption (disconnection or power failure), the Clock must be reset.
• Two hours after the set is switched on by the On time function it will automatically switch
back to off mode unless a button has been pressed.
Note
• Once the On or Off time is set, these functions operate daily at the preset time.
• Off time function overrides On time function if they are set to the same time.
• The set must be in off mode for the On time to work.
• On time will move on to auto off if no activity is received in 2hours after setting the On time.
37
Adjusting the Screen
SPECIAL ID to Select the special function
Special
Language
Country
Child lock
DDC-CI
XD Demo
OK MENU
To choose the language in which the control names are displayed
.
Language
Country
Please select your local teletext language.
If you don't, the teletext may not appear correctly on the screen.
This feature is not available in all countries.
Use the
buttons to select On or Off. It can be set up so that it can only be used with
Child lock
the remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position.
In order to unlock it, do the following :
* Push the MENU button on the remote control and set Child lock to the 'Off' position.
DDC/CI(Display Data Channel Command Interface) is communication protocol for
communications between PC and monitor.
DDC-CI
DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the monitor
OSD.
Monitor can be adjusted with PC by connecting communication between PC and monitor when
DDC/CI is ON, and monitor cannot be adjusted with PC because communication between PC
and monitor is disconnected when DDC/CI is OFF.
Use it to see the difference between XD demo on and XD Demo off.
(XD Demo function is not available in RGB PC/ DVI PC mode.)
XD Demo
38
Adjusting the Screen
SCREEN ID to adjust the screen function
Screen
To set
Auto config.
Manual config.
ARC
Reset
OK MENU
This button is for the automatic adjustment of the screen Position, Clock and Phase.
Auto
(It is not working in RGB-DTV, DVI.)
config.
Manual
config.
This button is for the manual adjustment of the screen Position, Clock and Phase.
•
•
•
H-Position (It is not working In DVI-PC mode.)
To move the displayed image left or right.
V-Position (It is not working In DVI-PC mode.)
To move the displayed image up or down.
Clock (It is not working In RGB-DTV, DVI mode.)
To minimize any vertical bars or stripes visible on the screen background.
The horizontal screen size will also change.
•
Phase (It is not working In RGB-DTV, DVI mode.)
To adjust the focus of the display. This item allows you to remove any horizontal noise
and clear or sharpen the image of characters.
To select the image size of the screen.
ARC
•
•
When TV/Video mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2
When RGB/DVI/Component mode: 4:3, 16:9
Use this function to reset the product to the factory default. However, language selection
will not be initialized.(It is working in RGB-PC, RGB-DTV, DVI-DTV mode.)
Reset
39
Troubleshooting
No image is displayed
• Check if the power cord is properly connected to
the outlet.
ꢀ Is the product's power cord
connected?
• See if the power switch is turned on.
ꢀ Is the power indicator turning on?
• Adjust brightness and contrast again.
ꢀ Power is on, power indicator is blue
but the screen appears extremely
dark.
• If the product is in power saving mode, move the
mouse or press any key.
ꢀ Does the power indicator look amber?
• In DVD Player or Settop Box, check the power
status of connected device.
• The signal from the PC (video card) is out of the
vertical or horizontal frequency range of the
product. Adjust the frequency range by referring to
the Specifications in this user's guide.
* Maximum resolution
ꢀ Does the 'Out of range' message
appear?
19 inch : RGB : 1440 X 900 @75 Hz
DVI : 1440 X 900 @60 Hz
20.1 inch : 1680 X 1050 @60 Hz
22 inch : 1680 X1050 @60 Hz
• The signal cable between PC and product is not
connected. Check the signal cable.
• Press the 'INPUT' button in the remote control to
check the input signal.
ꢀ Does the 'Check signal cable'
message appear?
'Unknown Product' message appears when the product is connected.
• Install the product driver, which is provided with
the product, or download it from the web site.
(http://www.lge.com)
ꢀ
Did you install the driver?
• See if the plug&play function is supported by
referring to the video card user's guide.
* Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
Note
* Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
40
Troubleshooting
The screen image looks abnormal.
• Adjust the Position menu in OSD .
ꢀ Is the screen position wrong?
• See if the video card resolution and frequency
are supported by the product. If the frequency is
out of range, set to the recommended resolution
in the Control Panel – Display – Setting menu.
• Adjust the Clock menu in OSD.
ꢀ Do thin lines appear on the
background screen?
• Adjust the Phase menu in OSD.
ꢀ Horizontal noise appears or the
characters look blurred.
After-image appears on the product.
ꢀ After-image appears when the
• If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screen saver
function.
product is turned off.
41
Troubleshooting
The audio function does not work.
ꢀ No sound?
• Check if the audio cable is connected properly.
• Adjust the volume.
• Check if the sound is set properly.
ꢀ Sound is too low.
• Adjust the volume.
The TV function does not work.
ꢀ The TV signal is not being received.
• See if you have selected the proper channel
mode.
• Use the automatic channel setup function.
• Check if the TV antenna is properly connected.
Screen colour is abnormal.
ꢀ Screen has poor colour resolution (16
• Set the colour resolution to more than 24 bits (true
colour)
colours).
Select Control Panel – Display – Settings
– Colour Table menu in Windows.
ꢀ Screen colour is unstable or mono-
• Check the connection status of the signal cable.
Or, re-insert the PC video card.
colour.
ꢀ Do black spots appear on the screen?
• Several pixels (red, green, white or black colour)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
42
Specifications
The product specifications can change without prior notice for product improvement.
[19 inch]
Screen Type
19 inches Wide (48.14 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 48.14 cm
0.285 mm
LCD Panel
Pixel Pitch
Max. Resolution
RGB : 1440 X 900 @75 Hz
Video Signal
DVI : 1440 X 900 @60 Hz
Recommended Resolution 1440 X 900 @60 Hz
Horizontal Frequency 28 - 83 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type Separate Sync, Digital
S-Video, Composite video, TV, D-Sub Analog, DVI-D
Input Connector
Power
SCART, PC Audio In, Headphone/Earphone, component
Rated Voltage
AC 100-240V~ 50/60Hz 1.0A
Power Consumption
On Mode
: 50 W (Typ.)
Sleep Mode ≤ 1 W
Off Mode
≤ 1 W
Tilt Range
Swivel
-3˚ ~ 10˚
Tilt
350˚
Size (WxLxH)
Weight (excl. package) 4.9 kg (10.8 Ibs)
456.8 mm x 230.0 mm x 395.0 mm
Dimension/Weight
Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80%
Environmental Conditions
Storage Condition
Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%
43
Specifications
The product specifications can change without prior notice for product improvement.
[20.1 inch]
Screen Type
20.1 inches Wide (51.113 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 51.113 cm
0.258 mm
LCD Panel
Pixel Pitch
Max. Resolution
RGB : 1680 X 1050 @60 Hz
Video Signal
DVI : 1680 X 1050 @60 Hz
Recommended Resolution 1680 X 1050 @60 Hz
Horizontal Frequency 28 - 83 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type Separate Sync, Digital
S-Video, Composite video, TV, D-Sub Analog, DVI-D
Input Connector
Power
SCART, PC Audio In, Headphone/Earphone, component
Rated Voltage
AC 100-240V~ 50/60Hz 1.0A
Power Consumption
On Mode
: 50 W (Typ.)
Sleep Mode ≤ 1 W
Off Mode
≤ 1 W
Tilt Range
Swivel
-3˚ ~ 10˚
Tilt
350˚
Size (WxLxH)
Weight (excl. package) 4.8 kg (10.58 Ibs)
484.3 mm x 230.0 mm x 414.3 mm
Dimension/Weight
Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80%
Environmental Conditions
Storage Condition
Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%
44
Specifications
The product specifications can change without prior notice for product improvement.
[22 inch]
Screen Type
22 inches Wide (55.868 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 55.868 cm
0.282 mm
LCD Panel
Pixel Pitch
Max. Resolution
RGB : 1680 X1050 @60 Hz
Video Signal
DVI : 1680 X1050 @60 Hz
Recommended Resolution 1680 X1050 @60 Hz
Horizontal Frequency 28 - 83 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type Separate Sync, Digital
S-Video, Composite video, TV, D-Sub Analog, DVI-D
Input Connector
Power
SCART, PC Audio In, Headphone/Earphone, component
Rated Voltage
AC 100-240V~ 50/60Hz 1.0A
Power Consumption
On Mode
: 50 W (Typ.)
Sleep Mode ≤ 1 W
Off Mode
≤ 1 W
Tilt Range
Swivel
-3˚ ~ 10˚
Tilt
350˚
Size (WxLxH)
Weight (excl. package) 5.82 kg (13 Ibs)
525.4 mm x 230.0 mm x 439.0 mm
Dimension/Weight
Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80%
Environmental Conditions
Storage Condition
Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%
45
Specifications
PC Mode – Preset Mode
[19 inch]
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Horizontal
Frequency
(kHz)
Vertical
Frequency
Preset mode
Preset mode
(Hz)
1
2
3
4
5
6
7
8
9
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
70
60
75
60
75
60
75
75
60
75
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
11
12
13
1440 x 900
1440 x 900
1440 x 900
55.5
55.935
70.635
60
60
75
10
* 1~13 : RGB mode * 1~12 : DVI mode
[20.1 inch] [22 inch]
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Horizontal
Vertical
Frequency
(Hz)
Frequency
Preset mode
Preset mode
(kHz)
1
2
3
4
5
6
7
8
9
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
70
60
75
60
75
60
75
75
60
75
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
11
12
1680 x 1050
1680 x 1050
64.674
65.290
60
60
10
Power Indicator
DTV -Timming
Preset mode
Vertical
Frequency
(Hz)
Horizontal
Frequency
(kHz)
Mode
Product
On Mode
Sleep Mode
Off Mode
Blue
Amber
Off
1
2
3
4
5
6
7
8
9
31.47
31.5
31.25
37.5
44.96
45
33.72
33.75
28.125
60
60
50
50
60
60
60
60
50
720 x 480/60p
720 x 480/60p
720 x 576/50p
1280 x 720/50p
1280 x 720/60p
1280 x 720/60p
1920 x 1080/60i
1920 x 1080/60i
1920 x 1080/50i
46
Specifications
VESA wall mounting
This product meets VESA-compliant mounting interface pad specifications.
1.
2.
Put the product on a piece of cloth or other soft surface with the front side facing downward.
Please pull and remove the stand base while pressing the
button on the stand body in the direction of the arrows.
3.
Please put the stand body up.
47
Specifications
4.
Please pull and remove the stand body while sliding and holding the latches down.
5.
Fasten the screw on the backside of the product and the other one in the joint of the stand.
6.
Install the VESA standard wall mounting.
VESA wall mounting
Connected to another
object (stand type and wall-
mounted type).
This product accepts a
VESA-compliant mounting
interfacepad.
AUDIO
(RGB/DVI) IN
DVI IN
RGB(PC/DTV) IN
ANTENNA IN
(This has to be purchased
separately if required.)
For further information,
refer to the VESA Wall
Mounting Instruction Guide.
L
R
S-VIDEO
AUDIO
(MONO)
VIDEO
AV1
H/P
AV IN
2
Pb
VIDEO
COMPONENT IN
Pr
L
R
Y
AUDIO
48
|