JLBICH605
Ceramic glass hob
Instruction manual
• Be careful when you connect the appliance • Do not let cookware boil dry to prevent
to the near sockets. Do not let electricity
bonds touch the appliance or hot
cookware. Do not let electricity bonds
tangle.
the damage to cookware and glass
ceramics.
• Do not use the cooking zones with empty
cookware or without cookware.
• Do not cover any part of the appliance with
aluminium foil.
How to prevent a damage
to the appliance
Warning! If there is a crack on
the surface, disconnect power
supply to prevent the electric
shock.
• If the objects or cookware fall on the glass
ceramic, the surface can be damaged.
• Cookware made of cast iron, cast
aluminium or with damaged bottoms can
scratch the glass ceramic if you move them
on the surface.
3
Contents
For the User
For the Installer
Safety information
2
5
Installation
11
Guide to use the
instruction manual
The following symbols will be found in the text
to guide you throughout the instructions:
Description of the appliance
Operating the appliance
On and Off
Automatic Switch Off
The heat setting
6
6
6
7
7
The child safety device
Safety instructions
Hints and tips
Helpful hints and tips
Care and cleaning
What to do if...
7
8
9
Environmental information
4
Description of the appliance
Cooking surface layout
1
2
145
180
mm
1 Single cooking zone 1200 W
2 Single cooking zone 1800 W
3 Single cooking zone 1200 W
4 Control panel
mm
145
210
3
mm
mm
5 Single cooking zone 2300 W
5
4
Control panel layout
1
2
3
Use the sensor fields to operate the appliance.
sensor field
function
1
2
3
starts and stops the hob
heat setting display
/
shows the heat setting or functions which are on
increases or decreases the heat settings
5
Heat setting displays
Displays and sounds tell which functions are started
Display
Description
The cooking zone is off
The cooking zone operates
There is a malfunction
-
A cooking zone is still hot (residual heat)
Lock/Child safety device is on
The automatic switch off is active
Residual heat indicator
Warning! Risk of burns from
residual heat!
Operating the appliance
• you cover a sensor field with an object (a
On and Off
Touch for 1 second to start or stop the
appliance.
pan, a cloth, etc.) for longer than 10
seconds. The sound operates some time
and the hob stops. Remove the object or
clean the control panel.
Automatic Switch Off
The function stops the hob automatically if:
• you do not stop a cooking zone or change
the heat setting after some time. See the
table. comes on.
• all cooking zones are off
.
• you do not set the heat setting after you
start the hob.
Automatic Switch Off times
Heat setting
Stops after
-
-
-
6 hours
5 hours
4 hours
1.5 hours
6
• Touch of the two front cooking zones at
the same time for 4 seconds. The symbol
comes on. Switch off the appliance.
The heat setting
Touch to increase the heat setting. Touch
to decrease the heat setting. The display
shows the heat setting. Touch and at
the same time to switch off.
Overriding the child safety device for one
cooking session
• Start the hob with . The symbol
comes on.
• Touch of the two front cooking zones at
the same time for 4 seconds. The symbol
comes on. Set the heat setting in
The child safety device
Thisfunction preventsan accidentaloperation
of the hob.
Starting the child safety device
less than 10 seconds. You can operate
• Start the hob with
. Do not set the
the hob. When you stop the hob with
the child safety device operates again.
,
heat settings .
• Touch of the two front cooking zones at
the same time for 4 seconds. The symbol
comes on. Switch off the appliance.
Switching off the child safety device
• Start the hob with
. Do not set the
heat settings .
Helpful hints and tips
Cookware
Energy saving
• The bottom of the cookware must
• If possible, always put the lids on the
cookware.
be as thick and flat as possible.
• Cookware made of enamelled steel
and with aluminium or copper
bottoms can cause discoloration on
glass ceramic surface.
• Put cookware on a cooking zone
before you start it.
• Stop the cooking zones before the
end of the cooking time to use
residual heat.
• The bottom of pans and cooking
zones must have the same
dimension.
Examples of cooking
applications
The data in the table is for guidance only.
7
Heat
settin
g
Use to:
Time
Hints
1
Keep cooked foods warm
as
Cover
required
1-2
1-2
2-3
3-4
4-5
4-5
6-7
Hollandaise sauce, melt: butter,
chocolate, gelatine
5-25 min Mix occasionally
Solidify: fluffy omelettes, baked eggs
10-40
min
Cook with a lid on
Simmer rice and milkbased dishes, heating 25-50
up ready-cooked meals
Add at least twice as much liquid as
rice, stir milk dishes part way through
min
Steam vegetables, fish, meat
20-45
min
Add a few tablespoons of liquid
Steam potatoes
20-60
min
Use max. ¼ l water for 750 g of
potatoes
Cook larger quantities of food, stews and 60-150
soups
Up to 3 l liquid plus ingredients
min
Gentle fry: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts
as
Turn halfway through
required
7-8
9
Heavy fry, hash browns, loin steaks,
steaks
5-15 min Turn halfway through
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips
Information on
acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus, we
recommend that you cook at the lowest
temperatures and do not brown food too
much.
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
8
scraper. Put the scraper on the glass
ceramic surface at an acute angle and
slide the blade on the surface.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
– Stop the appliance and let it cool
downbefore youclean:limescalerings,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaner for
glass ceramic or stainless steel.
For your safety, do not clean the
appliance with steam blasters or high-
pressure cleaners.
Scratches or dark stains on the glass
ceramic have no effect on how the
appliance operates.
2. Clean the appliance with a damp cloth and
some detergent.
3. At the end rub the appliance dry with
Removing the dirt:
a clean cloth.
1. – Remove immediately: melting
plastic, plastic foil, and food containing
sugar. Use a special glass ceramic
What to do if...
Problem
Possible cause and remedy
You cannot start the appliance or • You touched 2 or more sensor fields at the same time. Only
operate it.
touch one sensor field.
• There is water or fat stains on the control panel. Clean the
control panel
•
The child safety device operates
section “Child safety device”.
. Stop the function. See the
• Start the appliance again and set the heat setting in 10 seconds.
The residual heat indicator does The cooking zone is not hot because it operated only for a short
not come on.
time. If the cooking zone must be hot, speak to the after sales
service.
A sound operates and appliance
starts and stops again. After 5
seconds one more sound
operates.
You covered
. Uncover the sensor field.
• The automatic switch-off operates. Stop the appliance and start
it again.
comes on.
Overheating protection for the cooking zone operates. Stop the
cooking zone and start it again.
9
Problem
Possible cause and remedy
There is an error in the appliance.
and a number come on.
Disconnect the appliance from the electrical supply for some time.
Disconnect the fuse from the electrical system of the house.
Connect again. If comes on again, speak to the after sales service.
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the Customer Care Department. Give the
data from the rating plate, three-digit-letter
code for the glass ceramic (it is in the corner
of the cooking surface) and an error message
that comes on.
If you operated the appliance incorrectly, the
servicing by a customer service technician or
dealer will not be free of charge, even during
the warranty period. The instructions about
the customer service and conditions of
guarantee are in the guarantee booklet.
10
Installation
Before the installation, note down
this data from the rating plate:
• Model description
(Modell)................
• Product number (Prod.
Nr.) ............. ....
• Serial number (Ser. Nr.) ...............
You find the rating plate of the
appliance on its lower casing.
JLBICH605
58HAD54AO
949 593 031 01
6,5 kW
220-240 V 50-60-Hz
6,5 kW
JOHN LEWIS
11
Warning! Risk of injury from
electrical current. Carefully obey the
instructions for electrical connections.
Safety instructions
Warning! You must read these!
Make sure that the appliance is not
damaged because of transportation.
Do not connect a damaged appliance.
If it is necessary, speak to the supplier.
Only an authorised service technician
can install, connect or repair this
appliance. Use only original spare
parts.
Only use built-in appliances after you
assemble the appliance into correct
built-in units and work surfaces that
align to the standards.
Do not change the specifications or
modify this product. Risk of injury and
damage to the appliance.
Fully obey the laws, ordinances,
directives and standards in force in the
country where you use the appliance
(safety regulations, recycling
regulations, electrical safety rules etc.)!
Keep the minimum distances to other
appliances and units!
Install anti-shock protection, for
example install the drawers only with
a protective floor directly below the
appliance!
Protect the cut surfaces of the
worktop against moisture with a
correct sealant!
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• Install correctly to give anti-shock
protection.
• Loose and incorrect plug and socket
connectionscanmakethe terminalbecome
too hot.
• A qualified electrician must install the
clamping connections correctly.
• Use a strain relief clamp on cable.
• Use the correctmainscableof typeH05BB-
F Tmax 90°C (or higher) for a single-phase
or two-phase connection.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C; or
higher). Speak your local Service Force
Centre.
The appliance must have the electrical
installation which lets you disconnect the
appliance from the mains at all poles with a
contact opening width of minimum 3 mm.
You must have correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
Seal the appliance to the work top with
no space left with a correct sealant!
Protect the bottom of the appliance
from steam and moisture, e.g. from a
dishwasher or oven!
Do not install the appliance adjacent to
doors and below windows! If not, hot
cookware can be hit off the hob when
you open doors or windows.
12
Assembly
600 mm
min. 500 mm
min.
50 mm
min.
560+1 mm
50 mm
490+1 mm
R5
min.
25 mm
min.
20 mm
min.
30 mm
13
14
15
|